Debian Codegraph @

upstream/debian-unstable/man8/setkeycodes.8

raw
1 .\" @(#)man/man8/setkeycodes.8 1.0 Nov 8 22:30:48 MET 1994
2 .TH SETKEYCODES 8 "24 October 2024" "kbd"
3 .SH NAME
4 setkeycodes \- load kernel scancode-to-keycode mapping table entries
5 .SH SYNOPSIS
6 .B setkeycodes
7 [\fI\,options\/\fR]
8 .I "scancode keycode ..."
9 .SH DESCRIPTION
10 The
11 .I setkeycodes
12 command reads its arguments two at a time, each pair of arguments
13 consisting of a scancode (given in hexadecimal) and a keycode (given
14 in decimal). For each such pair, it tells the kernel keyboard driver
15 to map the specified scancode to the specified keycode.
16
17 This command is useful only for people with slightly unusual keyboards,
18 that have a few keys which produce scancodes that the kernel does not
19 recognize.
20
21 .SH THEORY
22 The usual PC keyboard produces a series of scancodes for each
23 key press and key release. (Scancodes are shown by
24 \fBshowkey \-s\fP, see
25 .BR showkey (1)
26 ) The kernel parses this stream of scancodes, and converts it to
27 a stream of keycodes (key press/release events).
28 (Keycodes are shown by \fBshowkey\fP.)
29 Apart from a few scancodes with special meaning, and apart from
30 the sequence produced by the Pause key, and apart from shiftstate
31 related scancodes, and apart from the key up/down bit,
32 the stream of scancodes consists of unescaped
33 scancodes xx (7 bits) and escaped scancodes e0 xx (8+7 bits).
34 To these scancodes or scancode pairs, a corresponding keycode can be
35 assigned (in the range 1-127).
36 For example, if you have a Macro key that produces e0 6f according
37 to
38 .BR showkey (1),
39 the command
40 .RS
41 .B "setkeycodes e06f 112"
42 .RE
43 will assign the keycode 112 to it, and then
44 .BR loadkeys (1)
45 can be used to define the function of this key.
46 .LP
47 Some older kernels might hardwire a low scancode range to the
48 equivalent keycodes; setkeycodes will fail when you try to remap
49 these.
50
51 .SH "2.6 KERNELS"
52 In 2.6 kernels key codes lie in the range 1-255, instead of 1-127.
53 (It might be best to confine oneself to the range 1-239.)
54 .LP
55 In 2.6 kernels raw mode, or scancode mode, is not very raw at all.
56 The code returned by showkey \-s will change after use of setkeycodes.
57 A kernel bug. See also
58 .BR showkey (1).
59 .SH OPTIONS
60 .TP
61 \fB\-C\fR, \fB\-\-console\fR=\fI\,DEV\/\fR
62 the console device to be used.
63 .TP
64 \fB\-V\fR, \fB\-\-version\fR
65 print version number.
66 .TP
67 \fB\-h\fR, \fB\-\-help\fR
68 print this usage message.
69 .SH BUGS
70 The keycodes of X have nothing to do with those of Linux.
71 Unusual keys can be made visible under Linux, but not under X.
72 .SH "SEE ALSO"
73 .BR dumpkeys (1),
74 .BR loadkeys (1),
75 .BR showkey (1),
76 .BR getkeycodes (8)