| 1 |
.\" |
| 2 |
.\" Copyright 2001 Keith Packard |
| 3 |
.\" |
| 4 |
.\" Permission to use, copy, modify, distribute, and sell this software and its |
| 5 |
.\" documentation for any purpose is hereby granted without fee, provided that |
| 6 |
.\" the above copyright notice appear in all copies and that both that |
| 7 |
.\" copyright notice and this permission notice appear in supporting |
| 8 |
.\" documentation, and that the name of Keith Packard not be used in |
| 9 |
.\" advertising or publicity pertaining to distribution of the software without |
| 10 |
.\" specific, written prior permission. Keith Packard makes no |
| 11 |
.\" representations about the suitability of this software for any purpose. It |
| 12 |
.\" is provided "as is" without express or implied warranty. |
| 13 |
.\" |
| 14 |
.\" KEITH PACKARD DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, |
| 15 |
.\" INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO |
| 16 |
.\" EVENT SHALL KEITH PACKARD BE LIABLE FOR ANY SPECIAL, INDIRECT OR |
| 17 |
.\" CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, |
| 18 |
.\" DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER |
| 19 |
.\" TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR |
| 20 |
.\" PERFORMANCE OF THIS SOFTWARE. |
| 21 |
.\" |
| 22 |
.TH XRANDR 1 "xrandr 1.5.3" "X Version 11" |
| 23 |
.SH NAME |
| 24 |
xrandr \- primitive command line interface to RandR extension |
| 25 |
.SH SYNOPSIS |
| 26 |
.B "xrandr" |
| 27 |
[\-\-help] [\-\-display \fIdisplay\fP] |
| 28 |
[\-q] [\-v] |
| 29 |
[\-\-verbose] |
| 30 |
[\-\-dryrun] |
| 31 |
[\-\-screen \fIsnum\fP] |
| 32 |
[\-\-q1] |
| 33 |
[\-\-q12] |
| 34 |
[\-\-current] |
| 35 |
[\-\-noprimary] |
| 36 |
[\-\-panning \fIwidth\fPx\fIheight\fP[+\fIx\fP+\fIy\fP[/\fItrack_width\fPx\fItrack_height\fP+\fItrack_x\fP+\fItrack_y\fP[/\fIborder_left\fP/\fIborder_top\fP/\fIborder_right\fP/\fIborder_bottom\fP]]]] |
| 37 |
[\-\-scale \fIx\fP[x\fIy\fP]] |
| 38 |
[\-\-scale-from \fIw\fPx\fIh\fP] |
| 39 |
[\-\-transform \fIa\fP,\fIb\fP,\fIc\fP,\fId\fP,\fIe\fP,\fIf\fP,\fIg\fP,\fIh\fP,\fIi\fP] |
| 40 |
[\-\-primary] |
| 41 |
[\-\-prop] |
| 42 |
[\-\-fb \fIwidth\fPx\fIheight\fP] |
| 43 |
[\-\-fbmm \fIwidth\fPx\fIheight\fP] |
| 44 |
[\-\-dpi \fIdpi\fP] |
| 45 |
[\-\-dpi \fIfrom-output\fP] |
| 46 |
[\-\-newmode \fIname\fP \fImode\fP] |
| 47 |
[\-\-rmmode \fIname\fP] |
| 48 |
[\-\-addmode \fIoutput\fP \fIname\fP] |
| 49 |
[\-\-delmode \fIoutput\fP \fIname\fP] |
| 50 |
[\-\-output \fIoutput\fP] |
| 51 |
[\-\-auto] |
| 52 |
[\-\-mode \fImode\fP] |
| 53 |
[\-\-preferred] |
| 54 |
[\-\-pos \fIx\fPx\fIy\fP] |
| 55 |
[\-\-rate \fIrate\fP] |
| 56 |
[\-\-reflect \fIreflection\fP] |
| 57 |
[\-\-rotate \fIorientation\fP] |
| 58 |
[\-\-left\-of \fIoutput\fP\] |
| 59 |
[\-\-right\-of \fIoutput\fP\] |
| 60 |
[\-\-above \fIoutput\fP\] |
| 61 |
[\-\-below \fIoutput\fP\] |
| 62 |
[\-\-same-as \fIoutput\fP\] |
| 63 |
[\-\-set \fIproperty\fP \fIvalue\fP] |
| 64 |
[\-\-off] |
| 65 |
[\-\-crtc \fIcrtc\fP] |
| 66 |
[\-\-gamma \fIred\fP[:\fIgreen\fP:\fIblue\fP]] |
| 67 |
[\-\-brightness \fIbrightness\fP] |
| 68 |
[\-o \fIorientation\fP] |
| 69 |
[\-s \fIsize\fP] |
| 70 |
[\-r \fIrate\fP] |
| 71 |
[\-x] [\-y] |
| 72 |
[\-\-listproviders] |
| 73 |
[\-\-setprovideroutputsource \fIprovider\fP \fIsource\fP] |
| 74 |
[\-\-setprovideroffloadsink \fIprovider\fP \fIsink\fP] |
| 75 |
[\-\-listmonitors] |
| 76 |
[\-\-listactivemonitors] |
| 77 |
[\-\-setmonitor \fIname\fP \fIgeometry\fP \fIoutputs\fP] |
| 78 |
[\-\-delmonitor \fIname\fP] |
| 79 |
.SH DESCRIPTION |
| 80 |
.I Xrandr |
| 81 |
is used to set the size, orientation and/or reflection of the outputs for a |
| 82 |
screen. It can also set the screen size. |
| 83 |
|
| 84 |
If invoked without any option, it will dump the state of the outputs, |
| 85 |
showing the existing modes for each of them, with a '+' after the preferred |
| 86 |
modes and a '*' after the current mode. |
| 87 |
|
| 88 |
There are a few global options. Other options modify the last output that is |
| 89 |
specified in earlier parameters in the command line. Multiple outputs may |
| 90 |
be modified at the same time by passing multiple \-\-output options followed |
| 91 |
immediately by their corresponding modifying options. |
| 92 |
.IP \-\-help |
| 93 |
Print out a summary of the usage and exit. |
| 94 |
.IP "\-v, \-\-version" |
| 95 |
Print out the RandR version reported by the X server and exit. |
| 96 |
.IP \-\-verbose |
| 97 |
Causes xrandr to be more verbose. When used with \-q (or without other |
| 98 |
options), xrandr will display more information about the server state. Please |
| 99 |
note that the gamma and brightness information are only approximations of the |
| 100 |
complete color profile stored in the server. When |
| 101 |
used along with options that reconfigure the system, progress will be |
| 102 |
reported while executing the configuration changes. |
| 103 |
.IP "\-q, \-\-query" |
| 104 |
When this option is present, or when no configuration changes are requested, |
| 105 |
xrandr will display the current state of the system. |
| 106 |
.IP "\-\-dryrun" |
| 107 |
Performs all the actions specified except that no changes are made. |
| 108 |
.IP "\-\-nograb" |
| 109 |
Apply the modifications without grabbing the screen. It avoids to block other |
| 110 |
applications during the update but it might also cause some applications that |
| 111 |
detect screen resize to receive old values. |
| 112 |
.IP "\-d, \-\-display \fIname\fP" |
| 113 |
This option selects the X display to use. Note this refers to the X |
| 114 |
screen abstraction, not the monitor (or output). |
| 115 |
.IP "\-\-screen \fIsnum\fP" |
| 116 |
This option selects which screen to manipulate. Note this refers to the X |
| 117 |
screen abstraction, not the monitor (or output). |
| 118 |
.IP \-\-q1 |
| 119 |
Forces the usage of the RandR version 1.1 protocol, even if a higher version |
| 120 |
is available. |
| 121 |
.IP \-\-q12 |
| 122 |
Forces the usage of the RandR version 1.2 protocol, even if the display does |
| 123 |
not report it as supported or a higher version is available. |
| 124 |
.PP |
| 125 |
.SH "RandR version 1.5 options" |
| 126 |
.PP |
| 127 |
Options for RandR 1.5 are used as a superset of the options for RandR 1.4. |
| 128 |
.PP |
| 129 |
.IP \-\-listmonitors |
| 130 |
Report information about all defined monitors. |
| 131 |
.IP \-\-listactivemonitors |
| 132 |
Report information about currently active monitors. |
| 133 |
.IP "\-\-setmonitor \fIname\fP \fIgeometry\fP \fIoutputs\fP"} {none|\fIoutput\fP,\fIoutput\fP,...}\n" |
| 134 |
Define a new monitor with the given geometry and associated to the given outputs. |
| 135 |
The output list is either the keyword \fBnone\fP or a comma-separated list of outputs. |
| 136 |
The geometry is either the keyword \fBauto\fP, in which case the monitor |
| 137 |
will automatically track the geometry of the associated outputs, or a manual specification |
| 138 |
in the form |
| 139 |
\fIw\fP/\fImmw\fPx\fIh\fP/\fImmh\fP+\fIx\fP+\fIy\fP |
| 140 |
where w, h, x, y are in pixels and mmw, mmh are the physical dimensions of the monitor. |
| 141 |
.IP "\-\-delmonitor \fIname\fP" |
| 142 |
Delete the given user-defined monitor. |
| 143 |
.PP |
| 144 |
.SH "RandR version 1.4 options" |
| 145 |
.PP |
| 146 |
Options for RandR 1.4 are used as a superset of the options for RandR 1.3. |
| 147 |
.IP \-\-listproviders |
| 148 |
Report information about the providers available. |
| 149 |
.IP "\-\-setprovideroutputsource \fIprovider\fP \fIsource\fP" |
| 150 |
Set \fIsource\fP as the source of display output images for \fIprovider\fP. |
| 151 |
This is only possible if \fIsource\fP and \fIprovider\fP have the \fBSource |
| 152 |
Output\fR and \fBSink Output\fR capabilities, respectively. |
| 153 |
If \fIsource\fP is \fB0x0\fP, then \fIprovider\fP is disconnected from its |
| 154 |
current output source. |
| 155 |
.IP "\-\-setprovideroffloadsink \fIprovider\fP \fIsink\fP" |
| 156 |
Set \fIprovider\fP as a render offload device for \fIsink\fP. |
| 157 |
This is only possible if \fIprovider\fP and \fIsink\fP have the \fBSource |
| 158 |
Offload\fR and \fBSink Offload\fR capabilities, respectively. |
| 159 |
If \fIsink\fP is \fB0x0\fP, then \fIprovider\fP is disconnected from its current |
| 160 |
render offload sink. |
| 161 |
.PP |
| 162 |
.SH "RandR version 1.3 options" |
| 163 |
.PP |
| 164 |
Options for RandR 1.3 are used as a superset of the options for RandR 1.2. |
| 165 |
.PP |
| 166 |
.IP \-\-current |
| 167 |
Return the current screen configuration, without polling for hardware changes. |
| 168 |
.IP \-\-noprimary |
| 169 |
Don't define a primary output. |
| 170 |
.PP |
| 171 |
.B "Per-output options" |
| 172 |
.IP "\-\-panning \fIwidth\fPx\fIheight\fP[+\fIx\fP+\fIy\fP[/\fItrack_width\fPx\fItrack_height\fP+\fItrack_x\fP+\fItrack_y\fP[/\fIborder_left\fP/\fIborder_top\fP/\fIborder_right\fP/\fIborder_bottom\fP]]]" |
| 173 |
This option sets the panning parameters. As soon as panning is |
| 174 |
enabled, the CRTC position can change with every pointer move. |
| 175 |
The first four parameters specify the total panning area, the next four the |
| 176 |
pointer tracking area (which defaults to the same area). The last four |
| 177 |
parameters specify the border and default to 0. A width or height set to zero |
| 178 |
disables panning on the according axis. You typically have to set the screen |
| 179 |
size with \fI--fb\fP simultaneously. |
| 180 |
.IP "\-\-transform \fIa\fP,\fIb\fP,\fIc\fP,\fId\fP,\fIe\fP,\fIf\fP,\fIg\fP,\fIh\fP,\fIi\fP" |
| 181 |
Specifies a transformation matrix to apply on the output. |
| 182 |
A bilinear filter is selected automatically unless the \-\-filter parameter is |
| 183 |
also specified. |
| 184 |
The mathematical form corresponds to: |
| 185 |
.RS |
| 186 |
.RS |
| 187 |
a b c |
| 188 |
.br |
| 189 |
d e f |
| 190 |
.br |
| 191 |
g h i |
| 192 |
.RE |
| 193 |
The transformation is based on homogeneous coordinates. The matrix multiplied |
| 194 |
by the coordinate vector of a pixel of the output gives the transformed |
| 195 |
coordinate vector of a pixel in the graphic buffer. More precisely, the vector |
| 196 |
.RI "(x y)" |
| 197 |
of the output pixel is extended to 3 values |
| 198 |
.RI "(x y w)," |
| 199 |
with 1 as the w coordinate and multiplied against the matrix. The final device |
| 200 |
coordinates of the pixel are then calculated with the so-called homogenic |
| 201 |
division by the transformed w coordinate. In other words, the device |
| 202 |
coordinates |
| 203 |
.RI "(x' y')" |
| 204 |
of the transformed pixel are: |
| 205 |
.RS |
| 206 |
x' = (ax + by + c) / w' and |
| 207 |
.br |
| 208 |
y' = (dx + ey + f) / w' , |
| 209 |
.br |
| 210 |
with w' = (gx + hy + i) . |
| 211 |
.RE |
| 212 |
Typically, \fIa\fP and |
| 213 |
\fIe\fP corresponds to the scaling on the X and Y axes, \fIc\fP and \fIf\fP |
| 214 |
corresponds to the translation on those axes, and \fIg\fP, \fIh\fP, and \fIi\fP |
| 215 |
are respectively 0, 0 and 1. The matrix can also be used to express more |
| 216 |
complex transformations such as keystone correction, or rotation. For a |
| 217 |
rotation of an angle T, this formula can be used: |
| 218 |
.RS |
| 219 |
cos T -sin T 0 |
| 220 |
.br |
| 221 |
sin T cos T 0 |
| 222 |
.br |
| 223 |
0 0 1 |
| 224 |
.RE |
| 225 |
As a special argument, instead of |
| 226 |
passing a matrix, one can pass the string \fInone\fP, in which case the default |
| 227 |
values are used (a unit matrix without filter). |
| 228 |
.RE |
| 229 |
.IP "\-\-filter \fIfiltermode\fP" |
| 230 |
Chooses the scaling filter method to be applied when the screen is scaled or |
| 231 |
transformed. |
| 232 |
Can be either 'bilinear' or 'nearest'. |
| 233 |
.IP "\-\-scale \fIx\fP[x\fIy\fP]" |
| 234 |
Changes the dimensions of the output picture. |
| 235 |
If the \fIy\fP value is omitted, the \fIx\fP value will be used for both dimensions. |
| 236 |
Values larger than 1 lead to a compressed screen (screen dimension bigger |
| 237 |
than the dimension of the output mode), and values less than 1 lead to |
| 238 |
a zoom in on the output. |
| 239 |
This option is actually a shortcut version of the \fI\-\-transform\fP option. |
| 240 |
.IP "\-\-scale-from \fIw\fPx\fIh\fP" |
| 241 |
Specifies the size in pixels of the area of the framebuffer to be displayed on |
| 242 |
this output. |
| 243 |
This option is actually a shortcut version of the \fI\-\-transform\fP option. |
| 244 |
.IP \-\-primary |
| 245 |
Set the output as primary. |
| 246 |
It will be sorted first in Xinerama and RANDR geometry requests. |
| 247 |
.PP |
| 248 |
.SH "RandR version 1.2 options" |
| 249 |
These options are only available for X server supporting RandR version 1.2 |
| 250 |
or newer. |
| 251 |
.IP "\-\-prop, \-\-properties" |
| 252 |
This option causes xrandr to display the contents of properties for each |
| 253 |
output. \-\-verbose also enables \-\-prop. |
| 254 |
.IP "\-\-fb \fIwidth\fPx\fIheight\fP" |
| 255 |
Reconfigures the screen to the specified size. All configured monitors must |
| 256 |
fit within this size. When this option is not provided, xrandr computes the |
| 257 |
smallest screen size that will hold the set of configured outputs; this |
| 258 |
option provides a way to override that behaviour. |
| 259 |
.IP "\-\-fbmm \fIwidth\fPx\fIheight\fP" |
| 260 |
Sets the value reported as physical size of the X screen as a whole |
| 261 |
(union of all configured monitors). In configurations with multiple |
| 262 |
monitors with different DPIs, the value has no physical meaning, but |
| 263 |
it may be used by some legacy clients which do not support RandR |
| 264 |
version 1.2 to compute a reference font scaling. Normally, |
| 265 |
xrandr resets the reported physical size values to keep the DPI constant. |
| 266 |
This overrides that computation. Default DPI value is 96. |
| 267 |
.IP "\-\-dpi \fIdpi\fP" |
| 268 |
.IP "\-\-dpi \fIfrom-output\fP" |
| 269 |
This also sets the value reported as physical size of the X screen as a whole |
| 270 |
(union of all configured monitors). In configurations with multiple |
| 271 |
monitors with different DPIs, the value has no physical meaning, but |
| 272 |
it may be used by some legacy clients which do not support RandR |
| 273 |
version 1.2 to compute a reference font scaling. This option uses either |
| 274 |
the specified DPI value, or the DPI of the given output, to compute an appropriate |
| 275 |
physical size using whatever pixel size will be set. Typical values are |
| 276 |
the default (96 DPI), the DPI of the only monitor in single-monitor |
| 277 |
configurations, or the DPI of the primary monitor in multi-monitor |
| 278 |
configurations. |
| 279 |
.IP "\-\-newmode \fIname\fP \fImode\fP" |
| 280 |
New modelines can be added to the server and then associated with outputs. |
| 281 |
This option does the former. The \fImode\fP is specified using the ModeLine |
| 282 |
syntax for xorg.conf: clock hdisp hsyncstart hsyncend htotal vdisp vsyncstart |
| 283 |
vsyncend vtotal \fIflags\fP. \fIflags\fP can be zero or more of +HSync, |
| 284 |
-HSync, +VSync, -VSync, Interlace, DoubleScan, CSync, +CSync, -CSync. Several |
| 285 |
tools permit to compute the usual modeline from a height, width, and refresh |
| 286 |
rate, for instance you can use \fBcvt\fR. |
| 287 |
.IP "\-\-rmmode \fIname\fP" |
| 288 |
This removes a mode from the server if it is otherwise unused. |
| 289 |
.IP "\-\-addmode \fIoutput\fP \fIname\fP" |
| 290 |
Add a mode to the set of valid modes for an output. |
| 291 |
.IP "\-\-delmode \fIoutput\fP \fIname\fP" |
| 292 |
Remove a mode from the set of valid modes for an output. |
| 293 |
.PP |
| 294 |
.B "Per-output options" |
| 295 |
.IP "\-\-output \fIoutput\fP" |
| 296 |
Selects an output to reconfigure. Use either the name of the output or the |
| 297 |
XID. |
| 298 |
.IP \-\-auto |
| 299 |
For connected but disabled outputs, this will enable them using their |
| 300 |
first preferred mode (or, something close to 96dpi if they have no preferred |
| 301 |
mode). For disconnected but enabled outputs, this will disable them. |
| 302 |
.IP "\-\-mode \fImode\fP" |
| 303 |
This selects a mode. Use either the name or the XID for \fImode\fP |
| 304 |
.IP "\-\-preferred" |
| 305 |
This selects the same mode as \-\-auto, but it doesn't automatically enable or |
| 306 |
disable the output. |
| 307 |
.IP "\-\-pos \fIx\fPx\fIy\fP" |
| 308 |
Position the output within the screen using pixel coordinates. In case reflection |
| 309 |
or rotation is applied, the translation is applied after the effects. |
| 310 |
.IP "\-\-rate \fIrate\fP" |
| 311 |
This marks a preference for refresh rates close to the specified value, when |
| 312 |
multiple modes have the same name, this will select the one with the nearest |
| 313 |
refresh rate. |
| 314 |
.IP "\-\-reflect \fIreflection\fP" |
| 315 |
Reflection can be one of 'normal' 'x', 'y' or 'xy'. This causes the output |
| 316 |
contents to be reflected across the specified axes. |
| 317 |
.IP "\-\-rotate \fIrotation\fP" |
| 318 |
Rotation can be one of 'normal', 'left', 'right' or 'inverted'. This causes |
| 319 |
the output contents to be rotated in the specified direction. 'right' specifies |
| 320 |
a clockwise rotation of the picture and 'left' specifies a counter-clockwise |
| 321 |
rotation. |
| 322 |
.IP "\-\-left\-of, \-\-right\-of, \-\-above, \-\-below, \-\-same-as \fIanother-output\fP" |
| 323 |
Use one of these options to position the output relative to the position of |
| 324 |
another output. This allows convenient tiling of outputs within the screen. |
| 325 |
The position is always computed relative to the new position of the other |
| 326 |
output, so it is not valid to say \-\-output a \-\-left\-of b \-\-output |
| 327 |
b \-\-left\-of a. |
| 328 |
.IP "\-\-set \fIproperty\fP \fIvalue\fP" |
| 329 |
Sets an output property. Integer properties may be specified as a valid |
| 330 |
(see \-\-prop) comma-separated list of decimal or hexadecimal (with a leading 0x) values. |
| 331 |
Atom properties may be set to any of the valid atoms (see \-\-prop). |
| 332 |
String properties may be set to any value. |
| 333 |
.IP "\-\-off" |
| 334 |
Disables the output. |
| 335 |
.IP "\-\-crtc \fIcrtc\fP" |
| 336 |
Uses the specified crtc (either as an index in the list of CRTCs or XID). |
| 337 |
In normal usage, this option is not required as xrandr tries to make |
| 338 |
sensible choices about which crtc to use with each output. When that fails |
| 339 |
for some reason, this option can override the normal selection. |
| 340 |
.IP "\-\-gamma \fIred\fP[:\fIgreen\fP:\fIblue\fP]" |
| 341 |
Set the specified floating point values as gamma correction on the crtc |
| 342 |
currently attached to this output. |
| 343 |
If green and blue are not specified, the red value will be used |
| 344 |
for all three components. |
| 345 |
Note that you cannot get two different values |
| 346 |
for cloned outputs (i.e.: which share the same crtc) and that switching an output to another crtc doesn't change |
| 347 |
the crtc gamma corrections at all. |
| 348 |
.IP "\-\-brightness \fIbrightness\fP" |
| 349 |
Multiply the gamma values on the crtc currently attached to the output to |
| 350 |
specified floating value. Useful for overly bright or overly dim outputs. |
| 351 |
However, this is a software only modification, if your hardware has support to |
| 352 |
actually change the brightness, you will probably prefer to use \fBxbacklight\fR. |
| 353 |
.PP |
| 354 |
.SH "RandR version 1.1 options" |
| 355 |
These options are available for X servers supporting RandR version 1.1 or |
| 356 |
older. They are still valid for newer X servers, but they don't interact |
| 357 |
sensibly with version 1.2 options on the same command line. |
| 358 |
.IP "\-s, \-\-size \fIsize-index\fP or \-\-size \fIwidth\fPx\fIheight\fP" |
| 359 |
This sets the screen size, either matching by size or using the index into |
| 360 |
the list of available sizes. |
| 361 |
.IP "\-r, \-\-rate, \-\-refresh \fIrate\fP" |
| 362 |
This sets the refresh rate closest to the specified value. |
| 363 |
.IP "\-o, \-\-orientation \fIrotation\fP" |
| 364 |
This specifies the orientation of the screen, |
| 365 |
and can be one of normal, inverted, left or right. |
| 366 |
.IP \-x |
| 367 |
Reflect across the X axis. |
| 368 |
.IP \-y |
| 369 |
Reflect across the Y axis. |
| 370 |
.SH EXAMPLES |
| 371 |
Sets an output called LVDS to its preferred mode, and on its right put an |
| 372 |
output called VGA to preferred mode of a screen which has been physically rotated clockwise: |
| 373 |
.RS |
| 374 |
xrandr --output LVDS --auto --rotate normal --pos 0x0 --output VGA --auto --rotate left --right-of LVDS |
| 375 |
.RE |
| 376 |
.PP |
| 377 |
Forces to use a 1024x768 mode on an output called VGA: |
| 378 |
.RS |
| 379 |
xrandr --newmode "1024x768" 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync |
| 380 |
.br |
| 381 |
xrandr --addmode VGA 1024x768 |
| 382 |
.br |
| 383 |
xrandr --output VGA --mode 1024x768 |
| 384 |
.RE |
| 385 |
.PP |
| 386 |
Enables panning on a 1600x768 desktop while displaying 1024x768 mode on an output called VGA: |
| 387 |
.RS |
| 388 |
xrandr --fb 1600x768 --output VGA --mode 1024x768 --panning 1600x0 |
| 389 |
.RE |
| 390 |
.PP |
| 391 |
Have one small 1280x800 LVDS screen showing a small version of a huge 3200x2000 desktop, and have a |
| 392 |
big VGA screen display the surrounding of the mouse at normal size. |
| 393 |
.RS |
| 394 |
xrandr --fb 3200x2000 --output LVDS --scale 2.5x2.5 --output VGA --pos 0x0 --panning 3200x2000+0+0/3200x2000+0+0/64/64/64/64 |
| 395 |
.RE |
| 396 |
.PP |
| 397 |
Displays the VGA output in trapezoid shape so that it is keystone corrected |
| 398 |
when the projector is slightly above the screen: |
| 399 |
.RS |
| 400 |
xrandr --fb 1024x768 --output VGA --transform 1.24,0.16,-124,0,1.24,0,0,0.000316,1 |
| 401 |
.RE |
| 402 |
.SH "SEE ALSO" |
| 403 |
Xrandr(3), cvt(1), xkeystone(1), xbacklight(1) |
| 404 |
.SH AUTHORS |
| 405 |
Keith Packard, |
| 406 |
Open Source Technology Center, Intel Corporation. |
| 407 |
and |
| 408 |
Jim Gettys, |
| 409 |
Cambridge Research Laboratory, HP Labs, HP. |