Debian Codegraph @

upstream/debian-unstable/man1/diskseekd.1

raw
1 .TH diskseekd 1 "27Jan21" fdutils-5.6
2 .SH Name
3 diskseek, diskseekd - disk seek daemon; simulates Messy Dos' drive cleaning effect
4 '\" t
5 .de TQ
6 .br
7 .ns
8 .TP \\$1
9 ..
10
11 .tr \(is'
12 .tr \(if`
13 .tr \(pd"
14
15 .SH Note
16 This manpage has been automatically generated from fdutils's texinfo
17 documentation. However, this process is only approximative, and some
18 items, such as cross-references, footnotes and indices are lost in this
19 translation process. Indeed, these items have no appropriate
20 representation in the manpage format. Moreover, only the items specific
21 to each command have been translated, and the general information about
22 fdutils has been dropped in the manpage version. Thus I strongly advise
23 you to use the original texinfo doc.
24 .TP
25 * \ \
26 To generate a printable copy from the texinfo doc, run the following
27 commands:
28
29 .nf
30 .ft 3
31 .in +0.3i
32 ./configure; make dvi; dvips fdutils.dvi
33 .fi
34 .in -0.3i
35 .ft R
36
37 \&\fR
38 .TP
39 * \ \
40 To generate a HTML copy, run:
41
42 .nf
43 .ft 3
44 .in +0.3i
45 ./configure; make html
46 .fi
47 .in -0.3i
48 .ft R
49
50 \&\fRA pre-made HTML can be found at:
51 \&\fR\&\f(CW\(ifhttp://www.tux.org/pub/knaff/fdutils\(is\fR
52 .TP
53 * \ \
54 To generate an info copy (browsable using emacs' info mode), run:
55
56 .nf
57 .ft 3
58 .in +0.3i
59 ./configure; make info
60 .fi
61 .in -0.3i
62 .ft R
63
64 \&\fR
65 .PP
66 The texinfo doc looks most pretty when printed or as HTML. Indeed, in
67 the info version certain examples are difficult to read due to the
68 quoting conventions used in info.
69 .SH Description
70 .PP
71 Several people have noticed that Linux has a bad tendency of killing
72 floppy drives. These failures remained completely mysterious, until
73 somebody noticed that they were due to huge layers of dust accumulating
74 in the floppy drives. This cannot happen under Messy Dos, because this
75 excuse for an operating system is so unstable that it crashes roughly
76 every 20 minutes (actually less if you are running Windows). When
77 rebooting, the BIOS seeks the drive, and by doing this, it shakes the
78 dust out of the drive mechanism. \fR\&\f(CWdiskseekd\fR simulates this effect
79 by seeking the drive periodically. If it is called as \fR\&\f(CWdiskseek\fR,
80 the drive is sought only once.
81 .PP
82 .SH Options
83 .PP
84 The syntax for \fR\&\f(CWdiskseekd\fR is as follows:
85
86 .nf
87 .ft 3
88 .in +0.3i
89 \&\fR\&\f(CWdiskseekd [\fR\&\f(CW\-d \fIdrive\fR\&\f(CW] [\fR\&\f(CW\-i \fIinterval\fR\&\f(CW] [\fR\&\f(CW\-p \fIpidfile\fR\&\f(CW]
90 .fi
91 .in -0.3i
92 .ft R
93
94 \&\fR
95 .TP
96 \&\fR\&\f(CW\-d\ \fIdrive\fR\&\f(CW\fR\
97 Selects the drive to seek. By default, drive 0 (\fR\&\f(CW\(if/dev/fd0\(is\fR) is sought.
98 .TP
99 \&\fR\&\f(CW\-i\ \fIinterval\fR\&\f(CW\fR\
100 Selects the cleaning interval, in seconds. If the interval is 0, a
101 single seek is done. This is useful when calling diskseek from a
102 crontab. The default is 1000 seconds (about 16 minutes) for
103 \&\fR\&\f(CWdiskseekd\fR and 0 for \fR\&\f(CWdiskseek\fR.
104 .TP
105 \&\fR\&\f(CW\-p\ \fIpidfile\fR\&\f(CW\fR\
106 Stores the process id of the diskseekd daemon into \fIpidfile\fR instead
107 of the default \fR\&\f(CW\(if/var/run/diskseekd.pid\(is\fR.
108 .PP
109 .SH Bugs
110 .TP
111 1.\
112 Other aspects of Messy Dos' flakiness are not simulated.
113 .TP
114 2.\
115 This section lacks a few smileys.
116 .SH See Also
117 Fdutils' texinfo doc