Debian Codegraph @

upstream/debian-unstable/man1/setfdprm.1

raw
1 .TH setfdprm 1 "27Jan21" fdutils-5.6
2 .SH Name
3 setfdprm - sets user-provided floppy disk parameters
4 '\" t
5 .de TQ
6 .br
7 .ns
8 .TP \\$1
9 ..
10
11 .tr \(is'
12 .tr \(if`
13 .tr \(pd"
14
15 .SH Note
16 This manpage has been automatically generated from fdutils's texinfo
17 documentation. However, this process is only approximative, and some
18 items, such as cross-references, footnotes and indices are lost in this
19 translation process. Indeed, these items have no appropriate
20 representation in the manpage format. Moreover, only the items specific
21 to each command have been translated, and the general information about
22 fdutils has been dropped in the manpage version. Thus I strongly advise
23 you to use the original texinfo doc.
24 .TP
25 * \ \
26 To generate a printable copy from the texinfo doc, run the following
27 commands:
28
29 .nf
30 .ft 3
31 .in +0.3i
32 ./configure; make dvi; dvips fdutils.dvi
33 .fi
34 .in -0.3i
35 .ft R
36
37 \&\fR
38 .TP
39 * \ \
40 To generate a HTML copy, run:
41
42 .nf
43 .ft 3
44 .in +0.3i
45 ./configure; make html
46 .fi
47 .in -0.3i
48 .ft R
49
50 \&\fRA pre-made HTML can be found at:
51 \&\fR\&\f(CW\(ifhttp://www.tux.org/pub/knaff/fdutils\(is\fR
52 .TP
53 * \ \
54 To generate an info copy (browsable using emacs' info mode), run:
55
56 .nf
57 .ft 3
58 .in +0.3i
59 ./configure; make info
60 .fi
61 .in -0.3i
62 .ft R
63
64 \&\fR
65 .PP
66 The texinfo doc looks most pretty when printed or as HTML. Indeed, in
67 the info version certain examples are difficult to read due to the
68 quoting conventions used in info.
69 .SH Description
70 .PP
71
72 .nf
73 .ft 3
74 .in +0.3i
75 \&\fR\&\f(CWsetfdprm [\fR\&\f(CW\-p] \fIdevice\fR\&\f(CW \fImedia\-description\fR\&\f(CW
76 \&\&
77 \&\fR\&\f(CWsetfdprm [\fR\&\f(CW\-c | \fR\&\f(CW\-y | \fR\&\f(CW\-n] \fIdevice\fR\&\f(CW
78 \&\&
79 .fi
80 .in -0.3i
81 .ft R
82
83 \&\fR
84 .PP
85 \&\fR\&\f(CWsetfdprm\fR is a utility that can be used to load disk parameters
86 into the auto-detecting floppy devices and "fixed parameter" floppy
87 devices, to clear old parameter sets and to disable or enable diagnostic
88 messages. These parameters are derived from a media-description,
89 see section Media description for more details.
90 .PP
91 Without any options, \fR\&\f(CWsetfdprm\fR loads the \fIdevice\fR (for example
92 \&\fR\&\f(CW\(if/dev/fd0\(is\fR or \fR\&\f(CW\(if/dev/fd1\(is\fR) with a new parameter set with the
93 \&\fIname\fR entry found in \fR\&\f(CW\(if/etc/mediaprm\(is\fR (usually named 360/360,
94 etc.). For autodetecting floppy devices, these parameters stay in
95 effect until the media is changed. For "fixed parameter" devices, they
96 stay in effect until they are changed again.
97 .PP
98 \&\fR\&\f(CWSetfdprm\fR can also be used by the superuser to redefine the
99 default formats.
100 .PP
101 .SH Options
102 .IP
103 .TP
104 \&\fR\&\f(CW\-p\ \fIdevice\ name\fR\&\f(CW\fR\
105 Permanently loads a new parameter set for the specified auto-configuring
106 floppy device for the configuration with \fIname\fR in
107 \&\fR\&\f(CW\(if/etc/mediaprm\(is\fR. Alternatively, the parameters can be given directly
108 from the command line.
109 .TP
110 \&\fR\&\f(CW\-c\ \fIdevice\fR\&\f(CW\fR\
111 Clears the parameter set of the specified auto-configuring floppy device.
112 .TP
113 \&\fR\&\f(CW\-y\ \fIdevice\fR\&\f(CW\fR\
114 Enables format detection messages for the specified auto-configuring floppy
115 device.
116 .TP
117 \&\fR\&\f(CW\-n\ \fIdevice\fR\&\f(CW\fR\
118 Disables format detection messages for the specified auto-configuring
119 floppy device.
120 .PP
121 .SH Media description
122 Please see the Media description section in the full fdutils
123 documentation:
124 .TQ
125 - Texinfo documentation (info fdutils)
126 .TQ
127 - HTML documentation in /usr/share/doc/fdutils/Fdutils.html
128 .TQ
129 - or DVI documentation in /usr/share/doc/fdutils/Fdutils.dvi.gz
130 .PP
131 .SH Bugs
132 This documentation is grossly incomplete.
133 .SH See Also
134 Fdutils' texinfo doc