Debian Codegraph @

upstream/debian-unstable/man1/perldiag.1

raw
1 .\" -*- mode: troff; coding: utf-8 -*-
2 .\" Automatically generated by Pod::Man 5.0102 (Pod::Simple 3.45)
3 .\"
4 .\" Standard preamble:
5 .\" ========================================================================
6 .de Sp \" Vertical space (when we can't use .PP)
7 .if t .sp .5v
8 .if n .sp
9 ..
10 .de Vb \" Begin verbatim text
11 .ft CW
12 .nf
13 .ne \\$1
14 ..
15 .de Ve \" End verbatim text
16 .ft R
17 .fi
18 ..
19 .\" \*(C` and \*(C' are quotes in nroff, nothing in troff, for use with C<>.
20 .ie n \{\
21 . ds C` ""
22 . ds C' ""
23 'br\}
24 .el\{\
25 . ds C`
26 . ds C'
27 'br\}
28 .\"
29 .\" Escape single quotes in literal strings from groff's Unicode transform.
30 .ie \n(.g .ds Aq \(aq
31 .el .ds Aq '
32 .\"
33 .\" If the F register is >0, we'll generate index entries on stderr for
34 .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index
35 .\" entries marked with X<> in POD. Of course, you'll have to process the
36 .\" output yourself in some meaningful fashion.
37 .\"
38 .\" Avoid warning from groff about undefined register 'F'.
39 .de IX
40 ..
41 .nr rF 0
42 .if \n(.g .if rF .nr rF 1
43 .if (\n(rF:(\n(.g==0)) \{\
44 . if \nF \{\
45 . de IX
46 . tm Index:\\$1\t\\n%\t"\\$2"
47 ..
48 . if !\nF==2 \{\
49 . nr % 0
50 . nr F 2
51 . \}
52 . \}
53 .\}
54 .rr rF
55 .\" ========================================================================
56 .\"
57 .IX Title "PERLDIAG 1"
58 .TH PERLDIAG 1 2025-11-16 "perl v5.40.1" "Perl Programmers Reference Guide"
59 .\" For nroff, turn off justification. Always turn off hyphenation; it makes
60 .\" way too many mistakes in technical documents.
61 .if n .ad l
62 .nh
63 .SH NAME
64 perldiag \- various Perl diagnostics
65 .SH DESCRIPTION
66 .IX Header "DESCRIPTION"
67 These messages are classified as follows (listed in increasing order of
68 desperation):
69 .PP
70 .Vb 7
71 \& (W) A warning (optional).
72 \& (D) A deprecation (enabled by default).
73 \& (S) A severe warning (enabled by default).
74 \& (F) A fatal error (trappable).
75 \& (P) An internal error you should never see (trappable).
76 \& (X) A very fatal error (nontrappable).
77 \& (A) An alien error message (not generated by Perl).
78 .Ve
79 .PP
80 The majority of messages from the first three classifications above
81 (W, D & S) can be controlled using the \f(CW\*(C`warnings\*(C'\fR pragma.
82 .PP
83 If a message can be controlled by the \f(CW\*(C`warnings\*(C'\fR pragma, its warning
84 category is included with the classification letter in the description
85 below. E.g. \f(CW\*(C`(W closed)\*(C'\fR means a warning in the \f(CW\*(C`closed\*(C'\fR category.
86 .PP
87 Optional warnings are enabled by using the \f(CW\*(C`warnings\*(C'\fR pragma or the \fB\-w\fR
88 and \fB\-W\fR switches. Warnings may be captured by setting \f(CW$SIG{_\|_WARN_\|_}\fR
89 to a reference to a routine that will be called on each warning instead
90 of printing it. See perlvar.
91 .PP
92 Severe warnings are always enabled, unless they are explicitly disabled
93 with the \f(CW\*(C`warnings\*(C'\fR pragma or the \fB\-X\fR switch.
94 .PP
95 Trappable errors may be trapped using the eval operator. See
96 "eval" in perlfunc. In almost all cases, warnings may be selectively
97 disabled or promoted to fatal errors using the \f(CW\*(C`warnings\*(C'\fR pragma.
98 See warnings.
99 .PP
100 The messages are in alphabetical order, without regard to upper or
101 lower-case. Some of these messages are generic. Spots that vary are
102 denoted with a \f(CW%s\fR or other printf-style escape. These escapes are
103 ignored by the alphabetical order, as are all characters other than
104 letters. To look up your message, just ignore anything that is not a
105 letter.
106 .ie n .IP "\fBaccept()\fR on closed socket %s" 4
107 .el .IP "\fBaccept()\fR on closed socket \f(CW%s\fR" 4
108 .IX Item "accept() on closed socket %s"
109 (W closed) You tried to do an accept on a closed socket. Did you forget
110 to check the return value of your \fBsocket()\fR call? See
111 "accept" in perlfunc.
112 .IP "ADJUST is experimental" 4
113 .IX Item "ADJUST is experimental"
114 (S experimental::class) This warning is emitted if you use the \f(CW\*(C`ADJUST\*(C'\fR
115 keyword of \f(CW\*(C`use feature \*(Aqclass\*(Aq\*(C'\fR. This keyword is currently
116 experimental and its behaviour may change in future releases of Perl.
117 .IP "Aliasing via reference is experimental" 4
118 .IX Item "Aliasing via reference is experimental"
119 (S experimental::refaliasing) This warning is emitted if you use
120 a reference constructor on the left-hand side of an assignment to
121 alias one variable to another. Simply suppress the warning if you
122 want to use the feature, but know that in doing so you are taking
123 the risk of using an experimental feature which may change or be
124 removed in a future Perl version:
125 .Sp
126 .Vb 3
127 \& no warnings "experimental::refaliasing";
128 \& use feature "refaliasing";
129 \& \e$x = \e$y;
130 .Ve
131 .ie n .IP "'%c' allowed only after types %s in %s" 4
132 .el .IP "'%c' allowed only after types \f(CW%s\fR in \f(CW%s\fR" 4
133 .IX Item "'%c' allowed only after types %s in %s"
134 (F) The modifiers '!', '<' and '>' are allowed in \fBpack()\fR or \fBunpack()\fR only
135 after certain types. See "pack" in perlfunc.
136 .IP "alpha\->\fBnumify()\fR is lossy" 4
137 .IX Item "alpha->numify() is lossy"
138 (W numeric) An alpha version can not be numified without losing
139 information.
140 .IP "Ambiguous call resolved as CORE::%s(), qualify as such or use &" 4
141 .IX Item "Ambiguous call resolved as CORE::%s(), qualify as such or use &"
142 (W ambiguous) A subroutine you have declared has the same name as a Perl
143 keyword, and you have used the name without qualification for calling
144 one or the other. Perl decided to call the builtin because the
145 subroutine is not imported.
146 .Sp
147 To force interpretation as a subroutine call, either put an ampersand
148 before the subroutine name, or qualify the name with its package.
149 Alternatively, you can import the subroutine (or pretend that it's
150 imported with the \f(CW\*(C`use subs\*(C'\fR pragma).
151 .Sp
152 To silently interpret it as the Perl operator, use the \f(CW\*(C`CORE::\*(C'\fR prefix
153 on the operator (e.g. \f(CWCORE::log($x)\fR) or declare the subroutine
154 to be an object method (see "Subroutine Attributes" in perlsub or
155 attributes).
156 .IP "Ambiguous range in transliteration operator" 4
157 .IX Item "Ambiguous range in transliteration operator"
158 (F) You wrote something like \f(CW\*(C`tr/a\-z\-0//\*(C'\fR which doesn't mean anything at
159 all. To include a \f(CW\*(C`\-\*(C'\fR character in a transliteration, put it either
160 first or last. (In the past, \f(CW\*(C`tr/a\-z\-0//\*(C'\fR was synonymous with
161 \&\f(CW\*(C`tr/a\-y//\*(C'\fR, which was probably not what you would have expected.)
162 .ie n .IP "Ambiguous use of %s resolved as %s" 4
163 .el .IP "Ambiguous use of \f(CW%s\fR resolved as \f(CW%s\fR" 4
164 .IX Item "Ambiguous use of %s resolved as %s"
165 (S ambiguous) You said something that may not be interpreted the way
166 you thought. Normally it's pretty easy to disambiguate it by supplying
167 a missing quote, operator, parenthesis pair or declaration.
168 .IP "Ambiguous use of \-%s resolved as \-&%s()" 4
169 .IX Item "Ambiguous use of -%s resolved as -&%s()"
170 (S ambiguous) You wrote something like \f(CW\*(C`\-foo\*(C'\fR, which might be the
171 string \f(CW"\-foo"\fR, or a call to the function \f(CW\*(C`foo\*(C'\fR, negated. If you meant
172 the string, just write \f(CW"\-foo"\fR. If you meant the function call,
173 write \f(CW\*(C`\-foo()\*(C'\fR.
174 .ie n .IP "Ambiguous use of %c resolved as operator %c" 4
175 .el .IP "Ambiguous use of \f(CW%c\fR resolved as operator \f(CW%c\fR" 4
176 .IX Item "Ambiguous use of %c resolved as operator %c"
177 (S ambiguous) \f(CW\*(C`%\*(C'\fR, \f(CW\*(C`&\*(C'\fR, and \f(CW\*(C`*\*(C'\fR are both infix operators (modulus,
178 bitwise and, and multiplication) \fIand\fR initial special characters
179 (denoting hashes, subroutines and typeglobs), and you said something
180 like \f(CW\*(C`*foo * foo\*(C'\fR that might be interpreted as either of them. We
181 assumed you meant the infix operator, but please try to make it more
182 clear \-\- in the example given, you might write \f(CW\*(C`*foo * foo()\*(C'\fR if you
183 really meant to multiply a glob by the result of calling a function.
184 .ie n .IP "Ambiguous use of %c{%s} resolved to %c%s" 4
185 .el .IP "Ambiguous use of \f(CW%c\fR{%s} resolved to \f(CW%c\fR%s" 4
186 .IX Item "Ambiguous use of %c{%s} resolved to %c%s"
187 (W ambiguous) You wrote something like \f(CW\*(C`@{foo}\*(C'\fR, which might be
188 asking for the variable \f(CW@foo\fR, or it might be calling a function
189 named foo, and dereferencing it as an array reference. If you wanted
190 the variable, you can just write \f(CW@foo\fR. If you wanted to call the
191 function, write \f(CW\*(C`@{foo()}\*(C'\fR ... or you could just not have a variable
192 and a function with the same name, and save yourself a lot of trouble.
193 .ie n .IP "Ambiguous use of %c{%s[...]} resolved to %c%s[...]" 4
194 .el .IP "Ambiguous use of \f(CW%c\fR{%s[...]} resolved to \f(CW%c\fR%s[...]" 4
195 .IX Item "Ambiguous use of %c{%s[...]} resolved to %c%s[...]"
196 .PD 0
197 .ie n .IP "Ambiguous use of %c{%s{...}} resolved to %c%s{...}" 4
198 .el .IP "Ambiguous use of \f(CW%c\fR{%s{...}} resolved to \f(CW%c\fR%s{...}" 4
199 .IX Item "Ambiguous use of %c{%s{...}} resolved to %c%s{...}"
200 .PD
201 (W ambiguous) You wrote something like \f(CW\*(C`${foo[2]}\*(C'\fR (where foo represents
202 the name of a Perl keyword), which might be looking for element number
203 2 of the array named \f(CW@foo\fR, in which case please write \f(CW$foo[2]\fR, or you
204 might have meant to pass an anonymous arrayref to the function named
205 foo, and then do a scalar deref on the value it returns. If you meant
206 that, write \f(CW\*(C`${foo([2])}\*(C'\fR.
207 .Sp
208 In regular expressions, the \f(CW\*(C`${foo[2]}\*(C'\fR syntax is sometimes necessary
209 to disambiguate between array subscripts and character classes.
210 \&\f(CW\*(C`/$length[2345]/\*(C'\fR, for instance, will be interpreted as \f(CW$length\fR followed
211 by the character class \f(CW\*(C`[2345]\*(C'\fR. If an array subscript is what you
212 want, you can avoid the warning by changing \f(CW\*(C`/${length[2345]}/\*(C'\fR to the
213 unsightly \f(CW\*(C`/${\e$length[2345]}/\*(C'\fR, by renaming your array to something
214 that does not coincide with a built-in keyword, or by simply turning
215 off warnings with \f(CW\*(C`no warnings \*(Aqambiguous\*(Aq;\*(C'\fR.
216 .IP "'|' and '<' may not both be specified on command line" 4
217 .IX Item "'|' and '<' may not both be specified on command line"
218 (F) An error peculiar to VMS. Perl does its own command line
219 redirection, and found that STDIN was a pipe, and that you also tried to
220 redirect STDIN using '<'. Only one STDIN stream to a customer, please.
221 .IP "'|' and '>' may not both be specified on command line" 4
222 .IX Item "'|' and '>' may not both be specified on command line"
223 (F) An error peculiar to VMS. Perl does its own command line
224 redirection, and thinks you tried to redirect stdout both to a file and
225 into a pipe to another command. You need to choose one or the other,
226 though nothing's stopping you from piping into a program or Perl script
227 which 'splits' output into two streams, such as
228 .Sp
229 .Vb 6
230 \& open(OUT,">$ARGV[0]") or die "Can\*(Aqt write to $ARGV[0]: $!";
231 \& while (<STDIN>) {
232 \& print;
233 \& print OUT;
234 \& }
235 \& close OUT;
236 .Ve
237 .ie n .IP "Applying %s to %s will act on scalar(%s)" 4
238 .el .IP "Applying \f(CW%s\fR to \f(CW%s\fR will act on scalar(%s)" 4
239 .IX Item "Applying %s to %s will act on scalar(%s)"
240 (W misc) The pattern match (\f(CW\*(C`//\*(C'\fR), substitution (\f(CW\*(C`s///\*(C'\fR), and
241 transliteration (\f(CW\*(C`tr///\*(C'\fR) operators work on scalar values. If you apply
242 one of them to an array or a hash, it will convert the array or hash to
243 a scalar value (the length of an array, or the population info of a
244 hash) and then work on that scalar value. This is probably not what
245 you meant to do. See "grep" in perlfunc and "map" in perlfunc for
246 alternatives.
247 .IP "Arg too short for msgsnd" 4
248 .IX Item "Arg too short for msgsnd"
249 (F) \fBmsgsnd()\fR requires a string at least as long as sizeof(long).
250 .IP "Argument ""%s"" isn't numeric%s" 4
251 .IX Item "Argument ""%s"" isn't numeric%s"
252 (W numeric) The indicated string was fed as an argument to an operator
253 that expected a numeric value instead. If you're fortunate the message
254 will identify which operator was so unfortunate.
255 .Sp
256 Note that for the \f(CW\*(C`Inf\*(C'\fR and \f(CW\*(C`NaN\*(C'\fR (infinity and not-a-number) the
257 definition of "numeric" is somewhat unusual: the strings themselves
258 (like "Inf") are considered numeric, and anything following them is
259 considered non-numeric.
260 .IP "Argument list not closed for PerlIO layer ""%s""" 4
261 .IX Item "Argument list not closed for PerlIO layer ""%s"""
262 (W layer) When pushing a layer with arguments onto the Perl I/O
263 system you forgot the ) that closes the argument list. (Layers
264 take care of transforming data between external and internal
265 representations.) Perl stopped parsing the layer list at this
266 point and did not attempt to push this layer. If your program
267 didn't explicitly request the failing operation, it may be the
268 result of the value of the environment variable PERLIO.
269 .IP "Argument ""%s"" treated as 0 in increment (++)" 4
270 .IX Item "Argument ""%s"" treated as 0 in increment (++)"
271 (W numeric) The indicated string was fed as an argument to the \f(CW\*(C`++\*(C'\fR
272 operator which expects either a number or a string matching
273 \&\f(CW\*(C`/^[a\-zA\-Z]*[0\-9]*\ez/\*(C'\fR. See "Auto-increment and
274 Auto-decrement" in perlop for details.
275 .IP "Array passed to stat will be coerced to a scalar%s" 4
276 .IX Item "Array passed to stat will be coerced to a scalar%s"
277 (W syntax) You called \fBstat()\fR on an array, but the array will be
278 coerced to a scalar \- the number of elements in the array.
279 .IP "A signature parameter must start with '$', '@' or '%'" 4
280 .IX Item "A signature parameter must start with '$', '@' or '%'"
281 (F) Each subroutine signature parameter declaration must start with a valid
282 sigil; for example:
283 .Sp
284 .Vb 1
285 \& sub foo ($x, $, $y = 1, @z) {}
286 .Ve
287 .IP "A slurpy parameter may not have a default value" 4
288 .IX Item "A slurpy parameter may not have a default value"
289 (F) Only scalar subroutine signature parameters may have a default value;
290 for example:
291 .Sp
292 .Vb 3
293 \& sub foo ($x = 1) {} # legal
294 \& sub foo (@x = (1)) {} # invalid
295 \& sub foo (%x = (a => b)) {} # invalid
296 .Ve
297 .ie n .IP "assertion botched: %s" 4
298 .el .IP "assertion botched: \f(CW%s\fR" 4
299 .IX Item "assertion botched: %s"
300 (X) The malloc package that comes with Perl had an internal failure.
301 .ie n .IP "Assertion %s failed: file ""%s"", line %d" 4
302 .el .IP "Assertion \f(CW%s\fR failed: file ""%s"", line \f(CW%d\fR" 4
303 .IX Item "Assertion %s failed: file ""%s"", line %d"
304 (X) A general assertion failed. The file in question must be examined.
305 .IP "Assigned value is not a reference" 4
306 .IX Item "Assigned value is not a reference"
307 (F) You tried to assign something that was not a reference to an lvalue
308 reference (e.g., \f(CW\*(C`\e$x = $y\*(C'\fR). If you meant to make \f(CW$x\fR an alias to \f(CW$y\fR, use
309 \&\f(CW\*(C`\e$x = \e$y\*(C'\fR.
310 .ie n .IP "Assigned value is not %s reference" 4
311 .el .IP "Assigned value is not \f(CW%s\fR reference" 4
312 .IX Item "Assigned value is not %s reference"
313 (F) You tried to assign a reference to a reference constructor, but the
314 two references were not of the same type. You cannot alias a scalar to
315 an array, or an array to a hash; the two types must match.
316 .Sp
317 .Vb 4
318 \& \e$x = \e@y; # error
319 \& \e@x = \e%y; # error
320 \& $y = [];
321 \& \e$x = $y; # error; did you mean \e$y?
322 .Ve
323 .IP "Assigning non-zero to $[ is no longer possible" 4
324 .IX Item "Assigning non-zero to $[ is no longer possible"
325 (F) When the "array_base" feature is disabled
326 (e.g., and under \f(CW\*(C`use v5.16;\*(C'\fR, and as of Perl 5.30)
327 the special variable \f(CW$[\fR, which is deprecated, is now a fixed zero value.
328 .IP "Assignment to both a list and a scalar" 4
329 .IX Item "Assignment to both a list and a scalar"
330 (F) If you assign to a conditional operator, the 2nd and 3rd arguments
331 must either both be scalars or both be lists. Otherwise Perl won't
332 know which context to supply to the right side.
333 .ie n .IP "Assuming NOT a POSIX class since %s in regex; marked by <\-\-\ HERE in m/%s/" 4
334 .el .IP "Assuming NOT a POSIX class since \f(CW%s\fR in regex; marked by <\-\-\ HERE in m/%s/" 4
335 .IX Item "Assuming NOT a POSIX class since %s in regex; marked by <--\ HERE in m/%s/"
336 (W regexp) You had something like these:
337 .Sp
338 .Vb 2
339 \& [[:alnum]]
340 \& [[:digit:xyz]
341 .Ve
342 .Sp
343 They look like they might have been meant to be the POSIX classes
344 \&\f(CW\*(C`[:alnum:]\*(C'\fR or \f(CW\*(C`[:digit:]\*(C'\fR. If so, they should be written:
345 .Sp
346 .Vb 2
347 \& [[:alnum:]]
348 \& [[:digit:]xyz]
349 .Ve
350 .Sp
351 Since these aren't legal POSIX class specifications, but are legal
352 bracketed character classes, Perl treats them as the latter. In the
353 first example, it matches the characters \f(CW":"\fR, \f(CW"["\fR, \f(CW"a"\fR, \f(CW"l"\fR,
354 \&\f(CW"m"\fR, \f(CW"n"\fR, and \f(CW"u"\fR.
355 .Sp
356 If these weren't meant to be POSIX classes, this warning message is
357 spurious, and can be suppressed by reordering things, such as
358 .Sp
359 .Vb 1
360 \& [[al:num]]
361 .Ve
362 .Sp
363 or
364 .Sp
365 .Vb 1
366 \& [[:munla]]
367 .Ve
368 .IP "<> at require-statement should be quotes" 4
369 .IX Item "<> at require-statement should be quotes"
370 (F) You wrote \f(CW\*(C`require <file>\*(C'\fR when you should have written
371 \&\f(CW\*(C`require \*(Aqfile\*(Aq\*(C'\fR.
372 .IP "Attempt to access disallowed key '%s' in a restricted hash" 4
373 .IX Item "Attempt to access disallowed key '%s' in a restricted hash"
374 (F) The failing code has attempted to get or set a key which is not in
375 the current set of allowed keys of a restricted hash.
376 .IP "Attempt to bless into a freed package" 4
377 .IX Item "Attempt to bless into a freed package"
378 (F) You wrote \f(CW\*(C`bless $foo\*(C'\fR with one argument after somehow causing
379 the current package to be freed. Perl cannot figure out what to
380 do, so it throws up its hands in despair.
381 .IP "Attempt to bless into a class" 4
382 .IX Item "Attempt to bless into a class"
383 (F) You are attempting to call \f(CW\*(C`bless\*(C'\fR with a package name that is a
384 new-style \f(CW\*(C`class\*(C'\fR. This is not necessary, as instances created by the
385 constructor are already in the correct class. Instances cannot be created
386 by other means, such as \f(CW\*(C`bless\*(C'\fR.
387 .IP "Attempt to bless into a reference" 4
388 .IX Item "Attempt to bless into a reference"
389 (F) The CLASSNAME argument to the \fBbless()\fR operator is expected to be
390 the name of the package to bless the resulting object into. You've
391 supplied instead a reference to something: perhaps you wrote
392 .Sp
393 .Vb 1
394 \& bless $self, $proto;
395 .Ve
396 .Sp
397 when you intended
398 .Sp
399 .Vb 1
400 \& bless $self, ref($proto) || $proto;
401 .Ve
402 .Sp
403 If you actually want to bless into the stringified version
404 of the reference supplied, you need to stringify it yourself, for
405 example by:
406 .Sp
407 .Vb 1
408 \& bless $self, "$proto";
409 .Ve
410 .IP "Attempt to clear deleted array" 4
411 .IX Item "Attempt to clear deleted array"
412 (S debugging) An array was assigned to when it was being freed.
413 Freed values are not supposed to be visible to Perl code. This
414 can also happen if XS code calls \f(CW\*(C`av_clear\*(C'\fR from a custom magic
415 callback on the array.
416 .IP "Attempt to delete disallowed key '%s' from a restricted hash" 4
417 .IX Item "Attempt to delete disallowed key '%s' from a restricted hash"
418 (F) The failing code attempted to delete from a restricted hash a key
419 which is not in its key set.
420 .IP "Attempt to delete readonly key '%s' from a restricted hash" 4
421 .IX Item "Attempt to delete readonly key '%s' from a restricted hash"
422 (F) The failing code attempted to delete a key whose value has been
423 declared readonly from a restricted hash.
424 .IP "Attempt to free non-arena SV: 0x%x" 4
425 .IX Item "Attempt to free non-arena SV: 0x%x"
426 (S internal) All SV objects are supposed to be allocated from arenas
427 that will be garbage collected on exit. An SV was discovered to be
428 outside any of those arenas.
429 .IP "Attempt to free nonexistent shared string '%s'%s" 4
430 .IX Item "Attempt to free nonexistent shared string '%s'%s"
431 (S internal) Perl maintains a reference-counted internal table of
432 strings to optimize the storage and access of hash keys and other
433 strings. This indicates someone tried to decrement the reference count
434 of a string that can no longer be found in the table.
435 .IP "Attempt to free temp prematurely: SV 0x%x" 4
436 .IX Item "Attempt to free temp prematurely: SV 0x%x"
437 (S debugging) Mortalized values are supposed to be freed by the
438 \&\fBfree_tmps()\fR routine. This indicates that something else is freeing the
439 SV before the \fBfree_tmps()\fR routine gets a chance, which means that the
440 \&\fBfree_tmps()\fR routine will be freeing an unreferenced scalar when it does
441 try to free it.
442 .IP "Attempt to free unreferenced glob pointers" 4
443 .IX Item "Attempt to free unreferenced glob pointers"
444 (S internal) The reference counts got screwed up on symbol aliases.
445 .IP "Attempt to free unreferenced scalar: SV 0x%x" 4
446 .IX Item "Attempt to free unreferenced scalar: SV 0x%x"
447 (S internal) Perl went to decrement the reference count of a scalar to
448 see if it would go to 0, and discovered that it had already gone to 0
449 earlier, and should have been freed, and in fact, probably was freed.
450 This could indicate that \fBSvREFCNT_dec()\fR was called too many times, or
451 that \fBSvREFCNT_inc()\fR was called too few times, or that the SV was
452 mortalized when it shouldn't have been, or that memory has been
453 corrupted.
454 .IP "Attempt to pack pointer to temporary value" 4
455 .IX Item "Attempt to pack pointer to temporary value"
456 (W pack) You tried to pass a temporary value (like the result of a
457 function, or a computed expression) to the "p" \fBpack()\fR template. This
458 means the result contains a pointer to a location that could become
459 invalid anytime, even before the end of the current statement. Use
460 literals or global values as arguments to the "p" \fBpack()\fR template to
461 avoid this warning.
462 .ie n .IP "Attempt to reload %s aborted." 4
463 .el .IP "Attempt to reload \f(CW%s\fR aborted." 4
464 .IX Item "Attempt to reload %s aborted."
465 (F) You tried to load a file with \f(CW\*(C`use\*(C'\fR or \f(CW\*(C`require\*(C'\fR that failed to
466 compile once already. Perl will not try to compile this file again
467 unless you delete its entry from \f(CW%INC\fR. See "require" in perlfunc and
468 "%INC" in perlvar.
469 .IP "Attempt to set length of freed array" 4
470 .IX Item "Attempt to set length of freed array"
471 (W misc) You tried to set the length of an array which has
472 been freed. You can do this by storing a reference to the
473 scalar representing the last index of an array and later
474 assigning through that reference. For example
475 .Sp
476 .Vb 2
477 \& $r = do {my @a; \e$#a};
478 \& $$r = 503
479 .Ve
480 .IP "Attempt to use reference as lvalue in substr" 4
481 .IX Item "Attempt to use reference as lvalue in substr"
482 (W substr) You supplied a reference as the first argument to \fBsubstr()\fR
483 used as an lvalue, which is pretty strange. Perhaps you forgot to
484 dereference it first. See "substr" in perlfunc.
485 .IP "Attribute prototype(%s) discards earlier prototype attribute in same sub" 4
486 .IX Item "Attribute prototype(%s) discards earlier prototype attribute in same sub"
487 (W misc) A sub was declared as sub foo : prototype(A) : prototype(B) {}, for
488 example. Since each sub can only have one prototype, the earlier
489 declaration(s) are discarded while the last one is applied.
490 .IP "av_reify called on tied array" 4
491 .IX Item "av_reify called on tied array"
492 (S debugging) This indicates that something went wrong and Perl got \fIvery\fR
493 confused about \f(CW@_\fR or \f(CW@DB::args\fR being tied.
494 .ie n .IP "Bad arg length for %s, is %u, should be %d" 4
495 .el .IP "Bad arg length for \f(CW%s\fR, is \f(CW%u\fR, should be \f(CW%d\fR" 4
496 .IX Item "Bad arg length for %s, is %u, should be %d"
497 (F) You passed a buffer of the wrong size to one of \fBmsgctl()\fR, \fBsemctl()\fR
498 or \fBshmctl()\fR. In C parlance, the correct sizes are, respectively,
499 sizeof(struct\ msqid_ds\ *), sizeof(struct\ semid_ds\ *), and
500 sizeof(struct\ shmid_ds\ *).
501 .IP "Bad evalled substitution pattern" 4
502 .IX Item "Bad evalled substitution pattern"
503 (F) You've used the \f(CW\*(C`/e\*(C'\fR switch to evaluate the replacement for a
504 substitution, but perl found a syntax error in the code to evaluate,
505 most likely an unexpected right brace '}'.
506 .ie n .IP "Bad filehandle: %s" 4
507 .el .IP "Bad filehandle: \f(CW%s\fR" 4
508 .IX Item "Bad filehandle: %s"
509 (F) A symbol was passed to something wanting a filehandle, but the
510 symbol has no filehandle associated with it. Perhaps you didn't do an
511 \&\fBopen()\fR, or did it in another package.
512 .IP "Bad \fBfree()\fR ignored" 4
513 .IX Item "Bad free() ignored"
514 (S malloc) An internal routine called \fBfree()\fR on something that had never
515 been \fBmalloc()\fRed in the first place. Mandatory, but can be disabled by
516 setting environment variable \f(CW\*(C`PERL_BADFREE\*(C'\fR to 0.
517 .Sp
518 This message can be seen quite often with DB_File on systems with "hard"
519 dynamic linking, like \f(CW\*(C`AIX\*(C'\fR and \f(CW\*(C`OS/2\*(C'\fR. It is a bug of \f(CW\*(C`Berkeley DB\*(C'\fR
520 which is left unnoticed if \f(CW\*(C`DB\*(C'\fR uses \fIforgiving\fR system \fBmalloc()\fR.
521 .IP "Bad infix plugin result (%zd) \- did not consume entire identifier <%s>" 4
522 .IX Item "Bad infix plugin result (%zd) - did not consume entire identifier <%s>"
523 (F) A plugin using the \f(CW\*(C`PL_infix_plugin\*(C'\fR mechanism to parse an infix
524 keyword consumed part of a named identifier operator name but did not
525 consume all of it. This is not permitted as it leads to fragile parsing
526 results.
527 .IP "Badly placed ()'s" 4
528 .IX Item "Badly placed ()'s"
529 (A) You've accidentally run your script through \fBcsh\fR instead
530 of Perl. Check the #! line, or manually feed your script into
531 Perl yourself.
532 .ie n .IP "Bad name after %s" 4
533 .el .IP "Bad name after \f(CW%s\fR" 4
534 .IX Item "Bad name after %s"
535 (F) You started to name a symbol by using a package prefix, and then
536 didn't finish the symbol. In particular, you can't interpolate outside
537 of quotes, so
538 .Sp
539 .Vb 2
540 \& $var = \*(Aqmyvar\*(Aq;
541 \& $sym = mypack::$var;
542 .Ve
543 .Sp
544 is not the same as
545 .Sp
546 .Vb 2
547 \& $var = \*(Aqmyvar\*(Aq;
548 \& $sym = "mypack::$var";
549 .Ve
550 .IP "Bad plugin affecting keyword '%s'" 4
551 .IX Item "Bad plugin affecting keyword '%s'"
552 (F) An extension using the keyword plugin mechanism violated the
553 plugin API.
554 .IP "Bad \fBrealloc()\fR ignored" 4
555 .IX Item "Bad realloc() ignored"
556 (S malloc) An internal routine called \fBrealloc()\fR on something that
557 had never been \fBmalloc()\fRed in the first place. Mandatory, but can
558 be disabled by setting the environment variable \f(CW\*(C`PERL_BADFREE\*(C'\fR to 1.
559 .ie n .IP "Bad symbol for %s" 4
560 .el .IP "Bad symbol for \f(CW%s\fR" 4
561 .IX Item "Bad symbol for %s"
562 (P) An internal request asked to add an entry of the named type to something that
563 wasn't a symbol table entry.
564 .IP "Bad symbol for scalar" 4
565 .IX Item "Bad symbol for scalar"
566 (P) An internal request asked to add a scalar entry to something that
567 wasn't a symbol table entry.
568 .IP "Bareword found in conditional" 4
569 .IX Item "Bareword found in conditional"
570 (W bareword) The compiler found a bareword where it expected a
571 conditional, which often indicates that an || or && was parsed as part
572 of the last argument of the previous construct, for example:
573 .Sp
574 .Vb 1
575 \& open FOO || die;
576 .Ve
577 .Sp
578 It may also indicate a misspelled constant that has been interpreted as
579 a bareword:
580 .Sp
581 .Vb 2
582 \& use constant TYPO => 1;
583 \& if (TYOP) { print "foo" }
584 .Ve
585 .Sp
586 The \f(CW\*(C`strict\*(C'\fR pragma is useful in avoiding such errors.
587 .IP "Bareword in require contains ""%s""" 4
588 .IX Item "Bareword in require contains ""%s"""
589 .PD 0
590 .IP "Bareword in require maps to disallowed filename ""%s""" 4
591 .IX Item "Bareword in require maps to disallowed filename ""%s"""
592 .IP "Bareword in require maps to empty filename" 4
593 .IX Item "Bareword in require maps to empty filename"
594 .PD
595 (F) The bareword form of require has been invoked with a filename which could
596 not have been generated by a valid bareword permitted by the parser. You
597 shouldn't be able to get this error from Perl code, but XS code may throw it
598 if it passes an invalid module name to \f(CW\*(C`Perl_load_module\*(C'\fR.
599 .IP "Bareword in require must not start with a double-colon: ""%s""" 4
600 .IX Item "Bareword in require must not start with a double-colon: ""%s"""
601 (F) In \f(CW\*(C`require Bare::Word\*(C'\fR, the bareword is not allowed to start with a
602 double-colon. Write \f(CW\*(C`require ::Foo::Bar\*(C'\fR as \f(CW\*(C`require Foo::Bar\*(C'\fR instead.
603 .IP "Bareword ""%s"" not allowed while ""strict subs"" in use" 4
604 .IX Item "Bareword ""%s"" not allowed while ""strict subs"" in use"
605 (F) With "strict subs" in use, a bareword is only allowed as a
606 subroutine identifier, in curly brackets or to the left of the "=>"
607 symbol. Perhaps you need to predeclare a subroutine?
608 .IP "Bareword ""%s"" refers to nonexistent package" 4
609 .IX Item "Bareword ""%s"" refers to nonexistent package"
610 (W bareword) You used a qualified bareword of the form \f(CW\*(C`Foo::\*(C'\fR, but the
611 compiler saw no other uses of that namespace before that point. Perhaps
612 you need to predeclare a package?
613 .IP "Bareword filehandle ""%s"" not allowed under 'no feature ""bareword_filehandles""'" 4
614 .IX Item "Bareword filehandle ""%s"" not allowed under 'no feature ""bareword_filehandles""'"
615 (F) You attempted to use a bareword filehandle with the
616 \&\f(CW\*(C`bareword_filehandles\*(C'\fR feature disabled.
617 .Sp
618 Only the built-in handles \f(CW\*(C`STDIN\*(C'\fR, \f(CW\*(C`STDOUT\*(C'\fR, \f(CW\*(C`STDERR\*(C'\fR, \f(CW\*(C`ARGV\*(C'\fR,
619 \&\f(CW\*(C`ARGVOUT\*(C'\fR and \f(CW\*(C`DATA\*(C'\fR can be used with the \f(CW\*(C`bareword_filehandles\*(C'\fR
620 feature disabled.
621 .IP "BEGIN failed\-\-compilation aborted" 4
622 .IX Item "BEGIN failed--compilation aborted"
623 (F) An untrapped exception was raised while executing a BEGIN
624 subroutine. Compilation stops immediately and the interpreter is
625 exited.
626 .IP "BEGIN not safe after errors\-\-compilation aborted" 4
627 .IX Item "BEGIN not safe after errors--compilation aborted"
628 (F) Perl found a \f(CW\*(C`BEGIN {}\*(C'\fR subroutine (or a \f(CW\*(C`use\*(C'\fR directive, which
629 implies a \f(CW\*(C`BEGIN {}\*(C'\fR) after one or more compilation errors had already
630 occurred. Since the intended environment for the \f(CW\*(C`BEGIN {}\*(C'\fR could not
631 be guaranteed (due to the errors), and since subsequent code likely
632 depends on its correct operation, Perl just gave up.
633 .IP "\e%d better written as $%d" 4
634 .IX Item "%d better written as $%d"
635 (W syntax) Outside of patterns, backreferences live on as variables.
636 The use of backslashes is grandfathered on the right-hand side of a
637 substitution, but stylistically it's better to use the variable form
638 because other Perl programmers will expect it, and it works better if
639 there are more than 9 backreferences.
640 .IP "Binary number > 0b11111111111111111111111111111111 non-portable" 4
641 .IX Item "Binary number > 0b11111111111111111111111111111111 non-portable"
642 (W portable) The binary number you specified is larger than 2**32\-1
643 (4294967295) and therefore non-portable between systems. See
644 perlport for more on portability concerns.
645 .ie n .IP "\fBbind()\fR on closed socket %s" 4
646 .el .IP "\fBbind()\fR on closed socket \f(CW%s\fR" 4
647 .IX Item "bind() on closed socket %s"
648 (W closed) You tried to do a bind on a closed socket. Did you forget to
649 check the return value of your \fBsocket()\fR call? See "bind" in perlfunc.
650 .ie n .IP "\fBbinmode()\fR on closed filehandle %s" 4
651 .el .IP "\fBbinmode()\fR on closed filehandle \f(CW%s\fR" 4
652 .IX Item "binmode() on closed filehandle %s"
653 (W unopened) You tried \fBbinmode()\fR on a filehandle that was never opened.
654 Check your control flow and number of arguments.
655 .IP "Bit vector size > 32 non-portable" 4
656 .IX Item "Bit vector size > 32 non-portable"
657 (W portable) Using bit vector sizes larger than 32 is non-portable.
658 .ie n .IP "Bizarre copy of %s" 4
659 .el .IP "Bizarre copy of \f(CW%s\fR" 4
660 .IX Item "Bizarre copy of %s"
661 (P) Perl detected an attempt to copy an internal value that is not
662 copiable.
663 .IP "Bizarre SvTYPE [%d]" 4
664 .IX Item "Bizarre SvTYPE [%d]"
665 (P) When starting a new thread or returning values from a thread, Perl
666 encountered an invalid data type.
667 .IP "Both or neither range ends should be Unicode in regex; marked by <\-\-\ HERE in m/%s/" 4
668 .IX Item "Both or neither range ends should be Unicode in regex; marked by <--\ HERE in m/%s/"
669 (W regexp) (only under \f(CW\*(C`use\ re\ \*(Aqstrict\*(Aq\*(C'\fR or within \f(CW\*(C`(?[...])\*(C'\fR)
670 .Sp
671 In a bracketed character class in a regular expression pattern, you
672 had a range which has exactly one end of it specified using \f(CW\*(C`\eN{}\*(C'\fR, and
673 the other end is specified using a non-portable mechanism. Perl treats
674 the range as a Unicode range, that is, all the characters in it are
675 considered to be the Unicode characters, and which may be different code
676 points on some platforms Perl runs on. For example, \f(CW\*(C`[\eN{U+06}\-\ex08]\*(C'\fR
677 is treated as if you had instead said \f(CW\*(C`[\eN{U+06}\-\eN{U+08}]\*(C'\fR, that is it
678 matches the characters whose code points in Unicode are 6, 7, and 8.
679 But that \f(CW\*(C`\ex08\*(C'\fR might indicate that you meant something different, so
680 the warning gets raised.
681 .ie n .IP "Buffer overflow in prime_env_iter: %s" 4
682 .el .IP "Buffer overflow in prime_env_iter: \f(CW%s\fR" 4
683 .IX Item "Buffer overflow in prime_env_iter: %s"
684 (W internal) A warning peculiar to VMS. While Perl was preparing to
685 iterate over \f(CW%ENV\fR, it encountered a logical name or symbol definition
686 which was too long, so it was truncated to the string shown.
687 .IP "Built-in function '%s' is experimental" 4
688 .IX Item "Built-in function '%s' is experimental"
689 (S experimental::builtin) A call is being made to a function in the
690 \&\f(CW\*(C`builtin::\*(C'\fR namespace, which is currently experimental. The existence
691 or nature of the function may be subject to change in a future version
692 of Perl.
693 .IP "builtin::import can only be called at compile time" 4
694 .IX Item "builtin::import can only be called at compile time"
695 (F) The \f(CW\*(C`import\*(C'\fR method of the \f(CW\*(C`builtin\*(C'\fR package was invoked when no code
696 is currently being compiled. Since this method is used to introduce new
697 lexical subroutines into the scope currently being compiled, this is not
698 going to have any effect.
699 .IP "Builtin version bundle ""%s"" is not supported by Perl" 4
700 .IX Item "Builtin version bundle ""%s"" is not supported by Perl"
701 (F) You attempted to \f(CW\*(C`use builtin :ver\*(C'\fR for a version number that is either
702 older than 5.39 (when the ability was added), or newer than the current perl
703 version.
704 .IP "Callback called exit" 4
705 .IX Item "Callback called exit"
706 (F) A subroutine invoked from an external package via \fBcall_sv()\fR
707 exited by calling exit.
708 .IP "%s() called too early to check prototype" 4
709 .IX Item "%s() called too early to check prototype"
710 (W prototype) You've called a function that has a prototype before the
711 parser saw a definition or declaration for it, and Perl could not check
712 that the call conforms to the prototype. You need to either add an
713 early prototype declaration for the subroutine in question, or move the
714 subroutine definition ahead of the call to get proper prototype
715 checking. Alternatively, if you are certain that you're calling the
716 function correctly, you may put an ampersand before the name to avoid
717 the warning. See perlsub.
718 .ie n .IP "Cannot assign :param(%s) to field %s because that name is already in use" 4
719 .el .IP "Cannot assign :param(%s) to field \f(CW%s\fR because that name is already in use" 4
720 .IX Item "Cannot assign :param(%s) to field %s because that name is already in use"
721 (F) An attempt was made to apply a parameter name to a field, when the name
722 is already being used by another field in the same class, or one of its
723 parent classes. This would cause a name clash so is not allowed.
724 .ie n .IP "Cannot chr %f" 4
725 .el .IP "Cannot chr \f(CW%f\fR" 4
726 .IX Item "Cannot chr %f"
727 (F) You passed an invalid number (like an infinity or not-a-number) to \f(CW\*(C`chr\*(C'\fR.
728 .ie n .IP "Cannot complete in-place edit of %s: %s" 4
729 .el .IP "Cannot complete in-place edit of \f(CW%s:\fR \f(CW%s\fR" 4
730 .IX Item "Cannot complete in-place edit of %s: %s"
731 (F) Your perl script appears to have changed directory while
732 performing an in-place edit of a file specified by a relative path,
733 and your system doesn't include the directory relative POSIX functions
734 needed to handle that.
735 .ie n .IP "Cannot compress %f in pack" 4
736 .el .IP "Cannot compress \f(CW%f\fR in pack" 4
737 .IX Item "Cannot compress %f in pack"
738 (F) You tried compressing an infinity or not-a-number as an unsigned
739 integer with BER, which makes no sense.
740 .IP "Cannot compress integer in pack" 4
741 .IX Item "Cannot compress integer in pack"
742 (F) An argument to pack("w",...) was too large to compress.
743 The BER compressed integer format can only be used with positive
744 integers, and you attempted to compress a very large number (> 1e308).
745 See "pack" in perlfunc.
746 .IP "Cannot compress negative numbers in pack" 4
747 .IX Item "Cannot compress negative numbers in pack"
748 (F) An argument to pack("w",...) was negative. The BER compressed integer
749 format can only be used with positive integers. See "pack" in perlfunc.
750 .ie n .IP "Cannot convert a reference to %s to typeglob" 4
751 .el .IP "Cannot convert a reference to \f(CW%s\fR to typeglob" 4
752 .IX Item "Cannot convert a reference to %s to typeglob"
753 (F) You manipulated Perl's symbol table directly, stored a reference
754 in it, then tried to access that symbol via conventional Perl syntax.
755 The access triggers Perl to autovivify that typeglob, but it there is
756 no legal conversion from that type of reference to a typeglob.
757 .ie n .IP "Cannot copy to %s" 4
758 .el .IP "Cannot copy to \f(CW%s\fR" 4
759 .IX Item "Cannot copy to %s"
760 (P) Perl detected an attempt to copy a value to an internal type that cannot
761 be directly assigned to.
762 .ie n .IP "Cannot create class %s as it already has a non-empty @ISA" 4
763 .el .IP "Cannot create class \f(CW%s\fR as it already has a non-empty \f(CW@ISA\fR" 4
764 .IX Item "Cannot create class %s as it already has a non-empty @ISA"
765 (F) An attempt was made to create a class out of a package that already has
766 an \f(CW@ISA\fR array, and the array is not empty. This is not permitted, as it
767 would lead to a class with inconsistent inheritance.
768 .IP "Cannot create an object of incomplete class ""%s""" 4
769 .IX Item "Cannot create an object of incomplete class ""%s"""
770 (F) An attempt was made to create an object of a class where the start
771 of the class definition has been seen, but the class has not been
772 completed.
773 .Sp
774 This can happen for a failed eval, or if you attempt to create an
775 object at compile time before the class is complete:
776 .Sp
777 .Vb 2
778 \& eval "class Foo {"; Foo\->new; # error
779 \& class Bar { BEGIN { Bar\->new } }; # error
780 .Ve
781 .IP "Cannot find encoding ""%s""" 4
782 .IX Item "Cannot find encoding ""%s"""
783 (S io) You tried to apply an encoding that did not exist to a filehandle,
784 either with \fBopen()\fR or \fBbinmode()\fR.
785 .IP "Cannot invoke a method of ""%s"" on an instance of ""%s""" 4
786 .IX Item "Cannot invoke a method of ""%s"" on an instance of ""%s"""
787 (F) You tried to directly call a \f(CW\*(C`method\*(C'\fR subroutine of one class by passing
788 in a value that is an instance of a different class. This is not permitted,
789 as the method would not have access to the correct instance fields.
790 .IP "Cannot invoke method on a non-instance" 4
791 .IX Item "Cannot invoke method on a non-instance"
792 (F) You tried to directly call a \f(CW\*(C`method\*(C'\fR subroutine of a class by passing
793 in a value that is not an instance of that class. This is not permitted, as
794 the method would not then have access to its instance fields.
795 .ie n .IP "Cannot open %s as a dirhandle: it is already open as a filehandle" 4
796 .el .IP "Cannot open \f(CW%s\fR as a dirhandle: it is already open as a filehandle" 4
797 .IX Item "Cannot open %s as a dirhandle: it is already open as a filehandle"
798 (F) You tried to use \fBopendir()\fR to associate a dirhandle to a symbol (glob
799 or scalar) that already holds a filehandle. Since this idiom might render
800 your code confusing, it was deprecated in Perl 5.10. As of Perl 5.28, it
801 is a fatal error.
802 .ie n .IP "Cannot open %s as a filehandle: it is already open as a dirhandle" 4
803 .el .IP "Cannot open \f(CW%s\fR as a filehandle: it is already open as a dirhandle" 4
804 .IX Item "Cannot open %s as a filehandle: it is already open as a dirhandle"
805 (F) You tried to use \fBopen()\fR to associate a filehandle to a symbol (glob
806 or scalar) that already holds a dirhandle. Since this idiom might render
807 your code confusing, it was deprecated in Perl 5.10. As of Perl 5.28, it
808 is a fatal error.
809 .IP "Cannot '%s' outside of a 'class'" 4
810 .IX Item "Cannot '%s' outside of a 'class'"
811 (F) You attempted to use one of the keywords that only makes sense inside
812 a \f(CW\*(C`class\*(C'\fR definition, at a location that is not inside such a class.
813 .ie n .IP "Cannot pack %f with '%c'" 4
814 .el .IP "Cannot pack \f(CW%f\fR with '%c'" 4
815 .IX Item "Cannot pack %f with '%c'"
816 (F) You tried converting an infinity or not-a-number to an integer,
817 which makes no sense.
818 .ie n .IP "Cannot printf %f with '%c'" 4
819 .el .IP "Cannot printf \f(CW%f\fR with '%c'" 4
820 .IX Item "Cannot printf %f with '%c'"
821 (F) You tried printing an infinity or not-a-number as a character (%c),
822 which makes no sense. Maybe you meant '%s', or just stringifying it?
823 .IP "Cannot reopen existing class ""%s""" 4
824 .IX Item "Cannot reopen existing class ""%s"""
825 (F) You tried to begin a \f(CW\*(C`class\*(C'\fR definition for a class that already exists.
826 A class may only have one definition block.
827 .ie n .IP "Cannot set tied @DB::args" 4
828 .el .IP "Cannot set tied \f(CW@DB::args\fR" 4
829 .IX Item "Cannot set tied @DB::args"
830 (F) \f(CW\*(C`caller\*(C'\fR tried to set \f(CW@DB::args\fR, but found it tied. Tying \f(CW@DB::args\fR
831 is not supported. (Before this error was added, it used to crash.)
832 .IP "Cannot tie unreifiable array" 4
833 .IX Item "Cannot tie unreifiable array"
834 (P) You somehow managed to call \f(CW\*(C`tie\*(C'\fR on an array that does not
835 keep a reference count on its arguments and cannot be made to
836 do so. Such arrays are not even supposed to be accessible to
837 Perl code, but are only used internally.
838 .IP "Cannot use _\|_CLASS_\|_ outside of a method or field initializer expression" 4
839 .IX Item "Cannot use __CLASS__ outside of a method or field initializer expression"
840 (F) A \f(CW\*(C`_\|_CLASS_\|_\*(C'\fR expression yields the class name of the object instance
841 executing the current method, and therefore it can only be placed inside an
842 actual method (or method-like expression, such as a field initializer
843 expression).
844 .IP "Cannot yet reorder \fBsv_vcatpvfn()\fR arguments from va_list" 4
845 .IX Item "Cannot yet reorder sv_vcatpvfn() arguments from va_list"
846 (F) Some XS code tried to use \f(CWsv_vcatpvfn()\fR or a related function with a
847 format string that specifies explicit indexes for some of the elements, and
848 using a C\-style variable-argument list (a \f(CW\*(C`va_list\*(C'\fR). This is not currently
849 supported. XS authors wanting to do this must instead construct a C array
850 of \f(CW\*(C`SV*\*(C'\fR scalars containing the arguments.
851 .IP "Can only compress unsigned integers in pack" 4
852 .IX Item "Can only compress unsigned integers in pack"
853 (F) An argument to pack("w",...) was not an integer. The BER compressed
854 integer format can only be used with positive integers, and you attempted
855 to compress something else. See "pack" in perlfunc.
856 .IP "Can't ""%s"" out of a ""defer"" block" 4
857 .IX Item "Can't ""%s"" out of a ""defer"" block"
858 (F) An attempt was made to jump out of the scope of a \f(CW\*(C`defer\*(C'\fR block by using
859 a control-flow statement such as \f(CW\*(C`return\*(C'\fR, \f(CW\*(C`goto\*(C'\fR or a loop control. This is
860 not permitted.
861 .IP "Can't ""%s"" out of a ""finally"" block" 4
862 .IX Item "Can't ""%s"" out of a ""finally"" block"
863 (F) Similar to above, but involving a \f(CW\*(C`finally\*(C'\fR block at the end of a
864 \&\f(CW\*(C`try\*(C'\fR/\f(CW\*(C`catch\*(C'\fR construction rather than a \f(CW\*(C`defer\*(C'\fR block.
865 .IP "Can't bless an object reference" 4
866 .IX Item "Can't bless an object reference"
867 (F) You attempted to call \f(CW\*(C`bless\*(C'\fR on a value that already refers to a real
868 object instance.
869 .IP "Can't bless non-reference value" 4
870 .IX Item "Can't bless non-reference value"
871 (F) Only hard references may be blessed. This is how Perl "enforces"
872 encapsulation of objects. See perlobj.
873 .IP "Can't ""break"" in a loop topicalizer" 4
874 .IX Item "Can't ""break"" in a loop topicalizer"
875 (F) You called \f(CW\*(C`break\*(C'\fR, but you're in a \f(CW\*(C`foreach\*(C'\fR block rather than
876 a \f(CW\*(C`given\*(C'\fR block. You probably meant to use \f(CW\*(C`next\*(C'\fR or \f(CW\*(C`last\*(C'\fR.
877 .IP "Can't ""break"" outside a given block" 4
878 .IX Item "Can't ""break"" outside a given block"
879 (F) You called \f(CW\*(C`break\*(C'\fR, but you're not inside a \f(CW\*(C`given\*(C'\fR block.
880 .IP "Can't call destructor for 0x%p in global destruction" 4
881 .IX Item "Can't call destructor for 0x%p in global destruction"
882 (S) This should not happen. Internals code has set up a destructor
883 using \f(CW\*(C`mortal_destructor_sv\*(C'\fR or \f(CW\*(C`mortal_destructor_x\*(C'\fR which is firing
884 during global destruction. Please attempt to reduce the code that triggers
885 this warning down to a small an example as possible and then report the
886 problem to <https://github.com/Perl/perl5/issues/new/choose>
887 .IP "Can't call method ""%s"" on an undefined value" 4
888 .IX Item "Can't call method ""%s"" on an undefined value"
889 (F) You used the syntax of a method call, but the slot filled by the
890 object reference or package name contains an undefined value. Something
891 like this will reproduce the error:
892 .Sp
893 .Vb 3
894 \& $BADREF = undef;
895 \& process $BADREF 1,2,3;
896 \& $BADREF\->process(1,2,3);
897 .Ve
898 .IP "Can't call method ""%s"" on unblessed reference" 4
899 .IX Item "Can't call method ""%s"" on unblessed reference"
900 (F) A method call must know in what package it's supposed to run. It
901 ordinarily finds this out from the object reference you supply, but you
902 didn't supply an object reference in this case. A reference isn't an
903 object reference until it has been blessed. See perlobj.
904 .IP "Can't call method ""%s"" without a package or object reference" 4
905 .IX Item "Can't call method ""%s"" without a package or object reference"
906 (F) You used the syntax of a method call, but the slot filled by the
907 object reference or package name contains an expression that returns a
908 defined value which is neither an object reference nor a package name.
909 Something like this will reproduce the error:
910 .Sp
911 .Vb 3
912 \& $BADREF = 42;
913 \& process $BADREF 1,2,3;
914 \& $BADREF\->process(1,2,3);
915 .Ve
916 .IP "Can't call \fBmro_isa_changed_in()\fR on anonymous symbol table" 4
917 .IX Item "Can't call mro_isa_changed_in() on anonymous symbol table"
918 (P) Perl got confused as to whether a hash was a plain hash or a
919 symbol table hash when trying to update \f(CW@ISA\fR caches.
920 .IP "Can't call \fBmro_method_changed_in()\fR on anonymous symbol table" 4
921 .IX Item "Can't call mro_method_changed_in() on anonymous symbol table"
922 (F) An XS module tried to call \f(CW\*(C`mro_method_changed_in\*(C'\fR on a hash that was
923 not attached to the symbol table.
924 .ie n .IP "Can't chdir to %s" 4
925 .el .IP "Can't chdir to \f(CW%s\fR" 4
926 .IX Item "Can't chdir to %s"
927 (F) You called \f(CW\*(C`perl \-x/foo/bar\*(C'\fR, but \fI/foo/bar\fR is not a directory
928 that you can chdir to, possibly because it doesn't exist.
929 .ie n .IP "Can't coerce %s to %s in %s" 4
930 .el .IP "Can't coerce \f(CW%s\fR to \f(CW%s\fR in \f(CW%s\fR" 4
931 .IX Item "Can't coerce %s to %s in %s"
932 (F) Certain types of SVs, in particular real symbol table entries
933 (typeglobs), can't be forced to stop being what they are. So you can't
934 say things like:
935 .Sp
936 .Vb 1
937 \& *foo += 1;
938 .Ve
939 .Sp
940 You CAN say
941 .Sp
942 .Vb 2
943 \& $foo = *foo;
944 \& $foo += 1;
945 .Ve
946 .Sp
947 but then \f(CW$foo\fR no longer contains a glob.
948 .IP "Can't ""continue"" outside a when block" 4
949 .IX Item "Can't ""continue"" outside a when block"
950 (F) You called \f(CW\*(C`continue\*(C'\fR, but you're not inside a \f(CW\*(C`when\*(C'\fR
951 or \f(CW\*(C`default\*(C'\fR block.
952 .IP "can't convert empty path" 4
953 .IX Item "can't convert empty path"
954 (F) On Cygwin, you called a path conversion function with an empty path.
955 Only non-empty paths are legal.
956 .IP "Can't create pipe mailbox" 4
957 .IX Item "Can't create pipe mailbox"
958 (P) An error peculiar to VMS. The process is suffering from exhausted
959 quotas or other plumbing problems.
960 .ie n .IP "Can't declare %s in ""%s""" 4
961 .el .IP "Can't declare \f(CW%s\fR in ""%s""" 4
962 .IX Item "Can't declare %s in ""%s"""
963 (F) Only scalar, array, and hash variables may be declared as "my", "our" or
964 "state" variables. They must have ordinary identifiers as names.
965 .IP "Can't ""default"" outside a topicalizer" 4
966 .IX Item "Can't ""default"" outside a topicalizer"
967 (F) You have used a \f(CW\*(C`default\*(C'\fR block that is neither inside a
968 \&\f(CW\*(C`foreach\*(C'\fR loop nor a \f(CW\*(C`given\*(C'\fR block. (Note that this error is
969 issued on exit from the \f(CW\*(C`default\*(C'\fR block, so you won't get the
970 error if you use an explicit \f(CW\*(C`continue\*(C'\fR.)
971 .ie n .IP "Can't determine class of operator %s, assuming BASEOP" 4
972 .el .IP "Can't determine class of operator \f(CW%s\fR, assuming BASEOP" 4
973 .IX Item "Can't determine class of operator %s, assuming BASEOP"
974 (S) This warning indicates something wrong in the internals of perl.
975 Perl was trying to find the class (e.g. LISTOP) of a particular OP,
976 and was unable to do so. This is likely to be due to a bug in the perl
977 internals, or due to a bug in XS code which manipulates perl optrees.
978 .ie n .IP "Can't do inplace edit: %s is not a regular file" 4
979 .el .IP "Can't do inplace edit: \f(CW%s\fR is not a regular file" 4
980 .IX Item "Can't do inplace edit: %s is not a regular file"
981 (S inplace) You tried to use the \fB\-i\fR switch on a special file, such as
982 a file in /dev, a FIFO or an uneditable directory. The file was ignored.
983 .ie n .IP "Can't do inplace edit on %s: %s" 4
984 .el .IP "Can't do inplace edit on \f(CW%s:\fR \f(CW%s\fR" 4
985 .IX Item "Can't do inplace edit on %s: %s"
986 (S inplace) The creation of the new file failed for the indicated
987 reason.
988 .ie n .IP "Can't do inplace edit: %s would not be unique" 4
989 .el .IP "Can't do inplace edit: \f(CW%s\fR would not be unique" 4
990 .IX Item "Can't do inplace edit: %s would not be unique"
991 (S inplace) Your filesystem does not support filenames longer than 14
992 characters and Perl was unable to create a unique filename during
993 inplace editing with the \fB\-i\fR switch. The file was ignored.
994 .IP "Can't do %s(""%s"") on non\-UTF\-8 locale; resolved to ""%s""." 4
995 .IX Item "Can't do %s(""%s"") on non-UTF-8 locale; resolved to ""%s""."
996 (W locale) You are 1) running under "\f(CW\*(C`use locale\*(C'\fR"; 2) the current
997 locale is not a UTF\-8 one; 3) you tried to do the designated case-change
998 operation on the specified Unicode character; and 4) the result of this
999 operation would mix Unicode and locale rules, which likely conflict.
1000 Mixing of different rule types is forbidden, so the operation was not
1001 done; instead the result is the indicated value, which is the best
1002 available that uses entirely Unicode rules. That turns out to almost
1003 always be the original character, unchanged.
1004 .Sp
1005 It is generally a bad idea to mix non\-UTF\-8 locales and Unicode, and
1006 this issue is one of the reasons why. This warning is raised when
1007 Unicode rules would normally cause the result of this operation to
1008 contain a character that is in the range specified by the locale,
1009 0..255, and hence is subject to the locale's rules, not Unicode's.
1010 .Sp
1011 If you are using locale purely for its characteristics related to things
1012 like its numeric and time formatting (and not \f(CW\*(C`LC_CTYPE\*(C'\fR), consider
1013 using a restricted form of the locale pragma (see "The "use
1014 locale" pragma" in perllocale) like "\f(CW\*(C`use\ locale\ \*(Aq:not_characters\*(Aq\*(C'\fR".
1015 .Sp
1016 Note that failed case-changing operations done as a result of
1017 case-insensitive \f(CW\*(C`/i\*(C'\fR regular expression matching will show up in this
1018 warning as having the \f(CW\*(C`fc\*(C'\fR operation (as that is what the regular
1019 expression engine calls behind the scenes.)
1020 .IP "Can't do waitpid with flags" 4
1021 .IX Item "Can't do waitpid with flags"
1022 (F) This machine doesn't have either \fBwaitpid()\fR or \fBwait4()\fR, so only
1023 \&\fBwaitpid()\fR without flags is emulated.
1024 .IP "Can't emulate \-%s on #! line" 4
1025 .IX Item "Can't emulate -%s on #! line"
1026 (F) The #! line specifies a switch that doesn't make sense at this
1027 point. For example, it'd be kind of silly to put a \fB\-x\fR on the #!
1028 line.
1029 .ie n .IP "Can't %s %s\-endian %ss on this platform" 4
1030 .el .IP "Can't \f(CW%s\fR \f(CW%s\fR\-endian \f(CW%ss\fR on this platform" 4
1031 .IX Item "Can't %s %s-endian %ss on this platform"
1032 (F) Your platform's byte-order is neither big-endian nor little-endian,
1033 or it has a very strange pointer size. Packing and unpacking big\- or
1034 little-endian floating point values and pointers may not be possible.
1035 See "pack" in perlfunc.
1036 .ie n .IP "Can't exec ""%s"": %s" 4
1037 .el .IP "Can't exec ""%s"": \f(CW%s\fR" 4
1038 .IX Item "Can't exec ""%s"": %s"
1039 (W exec) A \fBsystem()\fR, \fBexec()\fR, or piped open call could not execute the
1040 named program for the indicated reason. Typical reasons include: the
1041 permissions were wrong on the file, the file wasn't found in
1042 \&\f(CW$ENV{PATH}\fR, the executable in question was compiled for another
1043 architecture, or the #! line in a script points to an interpreter that
1044 can't be run for similar reasons. (Or maybe your system doesn't support
1045 #! at all.)
1046 .ie n .IP "Can't exec %s" 4
1047 .el .IP "Can't exec \f(CW%s\fR" 4
1048 .IX Item "Can't exec %s"
1049 (F) Perl was trying to execute the indicated program for you because
1050 that's what the #! line said. If that's not what you wanted, you may
1051 need to mention "perl" on the #! line somewhere.
1052 .ie n .IP "Can't execute %s" 4
1053 .el .IP "Can't execute \f(CW%s\fR" 4
1054 .IX Item "Can't execute %s"
1055 (F) You used the \fB\-S\fR switch, but the copies of the script to execute
1056 found in the PATH did not have correct permissions.
1057 .IP "Can't find an opnumber for ""%s""" 4
1058 .IX Item "Can't find an opnumber for ""%s"""
1059 (F) A string of a form \f(CW\*(C`CORE::word\*(C'\fR was given to \fBprototype()\fR, but there
1060 is no builtin with the name \f(CW\*(C`word\*(C'\fR.
1061 .ie n .IP "Can't find label %s" 4
1062 .el .IP "Can't find label \f(CW%s\fR" 4
1063 .IX Item "Can't find label %s"
1064 (F) You said to goto a label that isn't mentioned anywhere that it's
1065 possible for us to go to. See "goto" in perlfunc.
1066 .ie n .IP "Can't find %s on PATH" 4
1067 .el .IP "Can't find \f(CW%s\fR on PATH" 4
1068 .IX Item "Can't find %s on PATH"
1069 (F) You used the \fB\-S\fR switch, but the script to execute could not be
1070 found in the PATH.
1071 .ie n .IP "Can't find %s on PATH, '.' not in PATH" 4
1072 .el .IP "Can't find \f(CW%s\fR on PATH, '.' not in PATH" 4
1073 .IX Item "Can't find %s on PATH, '.' not in PATH"
1074 (F) You used the \fB\-S\fR switch, but the script to execute could not be
1075 found in the PATH, or at least not with the correct permissions. The
1076 script exists in the current directory, but PATH prohibits running it.
1077 .ie n .IP "Can't find string terminator %s anywhere before EOF" 4
1078 .el .IP "Can't find string terminator \f(CW%s\fR anywhere before EOF" 4
1079 .IX Item "Can't find string terminator %s anywhere before EOF"
1080 (F) Perl strings can stretch over multiple lines. This message means
1081 that the closing delimiter was omitted. Because bracketed quotes count
1082 nesting levels, the following is missing its final parenthesis:
1083 .Sp
1084 .Vb 1
1085 \& print q(The character \*(Aq(\*(Aq starts a side comment.);
1086 .Ve
1087 .Sp
1088 If you're getting this error from a here-document, you may have
1089 included unseen whitespace before or after your closing tag or there
1090 may not be a linebreak after it. A good programmer's editor will have
1091 a way to help you find these characters (or lack of characters). See
1092 perlop for the full details on here-documents.
1093 .IP "Can't find Unicode property definition ""%s""" 4
1094 .IX Item "Can't find Unicode property definition ""%s"""
1095 .PD 0
1096 .IP "Can't find Unicode property definition ""%s"" in regex; marked by <\-\- HERE in m/%s/" 4
1097 .IX Item "Can't find Unicode property definition ""%s"" in regex; marked by <-- HERE in m/%s/"
1098 .PD
1099 (F) The named property which you specified via \f(CW\*(C`\ep\*(C'\fR or \f(CW\*(C`\eP\*(C'\fR is not one
1100 known to Perl. Perhaps you misspelled the name? See
1101 "Properties accessible through \ep{} and \eP{}" in perluniprops
1102 for a complete list of available official
1103 properties. If it is a
1104 user-defined property
1105 it must have been defined by the time the regular expression is
1106 matched.
1107 .Sp
1108 If you didn't mean to use a Unicode property, escape the \f(CW\*(C`\ep\*(C'\fR, either
1109 by \f(CW\*(C`\e\ep\*(C'\fR (just the \f(CW\*(C`\ep\*(C'\fR) or by \f(CW\*(C`\eQ\ep\*(C'\fR (the rest of the string, or
1110 until \f(CW\*(C`\eE\*(C'\fR).
1111 .ie n .IP "Can't fork: %s" 4
1112 .el .IP "Can't fork: \f(CW%s\fR" 4
1113 .IX Item "Can't fork: %s"
1114 (F) A fatal error occurred while trying to fork while opening a
1115 pipeline.
1116 .IP "Can't fork, trying again in 5 seconds" 4
1117 .IX Item "Can't fork, trying again in 5 seconds"
1118 (W pipe) A fork in a piped open failed with EAGAIN and will be retried
1119 after five seconds.
1120 .IP "Can't get filespec \- stale stat buffer?" 4
1121 .IX Item "Can't get filespec - stale stat buffer?"
1122 (S) A warning peculiar to VMS. This arises because of the difference
1123 between access checks under VMS and under the Unix model Perl assumes.
1124 Under VMS, access checks are done by filename, rather than by bits in
1125 the stat buffer, so that ACLs and other protections can be taken into
1126 account. Unfortunately, Perl assumes that the stat buffer contains all
1127 the necessary information, and passes it, instead of the filespec, to
1128 the access-checking routine. It will try to retrieve the filespec using
1129 the device name and FID present in the stat buffer, but this works only
1130 if you haven't made a subsequent call to the CRTL \fBstat()\fR routine,
1131 because the device name is overwritten with each call. If this warning
1132 appears, the name lookup failed, and the access-checking routine gave up
1133 and returned FALSE, just to be conservative. (Note: The access-checking
1134 routine knows about the Perl \f(CW\*(C`stat\*(C'\fR operator and file tests, so you
1135 shouldn't ever see this warning in response to a Perl command; it arises
1136 only if some internal code takes stat buffers lightly.)
1137 .IP "Can't get pipe mailbox device name" 4
1138 .IX Item "Can't get pipe mailbox device name"
1139 (P) An error peculiar to VMS. After creating a mailbox to act as a
1140 pipe, Perl can't retrieve its name for later use.
1141 .IP "Can't get SYSGEN parameter value for MAXBUF" 4
1142 .IX Item "Can't get SYSGEN parameter value for MAXBUF"
1143 (P) An error peculiar to VMS. Perl asked \f(CW$GETSYI\fR how big you want your
1144 mailbox buffers to be, and didn't get an answer.
1145 .IP "Can't ""goto"" into a binary or list expression" 4
1146 .IX Item "Can't ""goto"" into a binary or list expression"
1147 (F) A "goto" statement was executed to jump into the middle of a binary
1148 or list expression. You can't get there from here. The reason for this
1149 restriction is that the interpreter would get confused as to how many
1150 arguments there are, resulting in stack corruption or crashes. This
1151 error occurs in cases such as these:
1152 .Sp
1153 .Vb 2
1154 \& goto F;
1155 \& print do { F: }; # Can\*(Aqt jump into the arguments to print
1156 \&
1157 \& goto G;
1158 \& $x + do { G: $y }; # How is + supposed to get its first operand?
1159 .Ve
1160 .IP "Can't ""goto"" into a ""defer"" block" 4
1161 .IX Item "Can't ""goto"" into a ""defer"" block"
1162 (F) A \f(CW\*(C`goto\*(C'\fR statement was executed to jump into the scope of a \f(CW\*(C`defer\*(C'\fR
1163 block. This is not permitted.
1164 .IP "Can't ""goto"" into a ""given"" block" 4
1165 .IX Item "Can't ""goto"" into a ""given"" block"
1166 (F) A "goto" statement was executed to jump into the middle of a \f(CW\*(C`given\*(C'\fR
1167 block. You can't get there from here. See "goto" in perlfunc.
1168 .IP "Can't ""goto"" into the middle of a foreach loop" 4
1169 .IX Item "Can't ""goto"" into the middle of a foreach loop"
1170 (F) A "goto" statement was executed to jump into the middle of a foreach
1171 loop. You can't get there from here. See "goto" in perlfunc.
1172 .IP "Can't ""goto"" out of a pseudo block" 4
1173 .IX Item "Can't ""goto"" out of a pseudo block"
1174 (F) A "goto" statement was executed to jump out of what might look like
1175 a block, except that it isn't a proper block. This usually occurs if
1176 you tried to jump out of a \fBsort()\fR block or subroutine, which is a no-no.
1177 See "goto" in perlfunc.
1178 .IP "Can't goto subroutine from an eval\-%s" 4
1179 .IX Item "Can't goto subroutine from an eval-%s"
1180 (F) The "goto subroutine" call can't be used to jump out of an eval
1181 "string" or block.
1182 .IP "Can't goto subroutine from a sort sub (or similar callback)" 4
1183 .IX Item "Can't goto subroutine from a sort sub (or similar callback)"
1184 (F) The "goto subroutine" call can't be used to jump out of the
1185 comparison sub for a \fBsort()\fR, or from a similar callback (such
1186 as the \fBreduce()\fR function in List::Util).
1187 .IP "Can't goto subroutine outside a subroutine" 4
1188 .IX Item "Can't goto subroutine outside a subroutine"
1189 (F) The deeply magical "goto subroutine" call can only replace one
1190 subroutine call for another. It can't manufacture one out of whole
1191 cloth. In general you should be calling it out of only an AUTOLOAD
1192 routine anyway. See "goto" in perlfunc.
1193 .IP "Can't ignore signal CHLD, forcing to default" 4
1194 .IX Item "Can't ignore signal CHLD, forcing to default"
1195 (W signal) Perl has detected that it is being run with the SIGCHLD
1196 signal (sometimes known as SIGCLD) disabled. Since disabling this
1197 signal will interfere with proper determination of exit status of child
1198 processes, Perl has reset the signal to its default value. This
1199 situation typically indicates that the parent program under which Perl
1200 may be running (e.g. cron) is being very careless.
1201 .IP "Can't kill a non-numeric process ID" 4
1202 .IX Item "Can't kill a non-numeric process ID"
1203 (F) Process identifiers must be (signed) integers. It is a fatal error to
1204 attempt to \fBkill()\fR an undefined, empty-string or otherwise non-numeric
1205 process identifier.
1206 .IP "Can't ""last"" outside a loop block" 4
1207 .IX Item "Can't ""last"" outside a loop block"
1208 (F) A "last" statement was executed to break out of the current block,
1209 except that there's this itty bitty problem called there isn't a current
1210 block. Note that an "if" or "else" block doesn't count as a "loopish"
1211 block, as doesn't a block given to \fBsort()\fR, \fBmap()\fR or \fBgrep()\fR. You can
1212 usually double the curlies to get the same effect though, because the
1213 inner curlies will be considered a block that loops once. See
1214 "last" in perlfunc.
1215 .IP "Can't linearize anonymous symbol table" 4
1216 .IX Item "Can't linearize anonymous symbol table"
1217 (F) Perl tried to calculate the method resolution order (MRO) of a
1218 package, but failed because the package stash has no name.
1219 .ie n .IP "Can't load '%s' for module %s" 4
1220 .el .IP "Can't load '%s' for module \f(CW%s\fR" 4
1221 .IX Item "Can't load '%s' for module %s"
1222 (F) The module you tried to load failed to load a dynamic extension.
1223 This may either mean that you upgraded your version of perl to one
1224 that is incompatible with your old dynamic extensions (which is known
1225 to happen between major versions of perl), or (more likely) that your
1226 dynamic extension was built against an older version of the library
1227 that is installed on your system. You may need to rebuild your old
1228 dynamic extensions.
1229 .ie n .IP "Can't localize lexical variable %s" 4
1230 .el .IP "Can't localize lexical variable \f(CW%s\fR" 4
1231 .IX Item "Can't localize lexical variable %s"
1232 (F) You used local on a variable name that was previously declared as a
1233 lexical variable using "my" or "state". This is not allowed. If you
1234 want to localize a package variable of the same name, qualify it with
1235 the package name.
1236 .IP "Can't localize through a reference" 4
1237 .IX Item "Can't localize through a reference"
1238 (F) You said something like \f(CW\*(C`local $$ref\*(C'\fR, which Perl can't currently
1239 handle, because when it goes to restore the old value of whatever \f(CW$ref\fR
1240 pointed to after the scope of the \fBlocal()\fR is finished, it can't be sure
1241 that \f(CW$ref\fR will still be a reference.
1242 .ie n .IP "Can't locate %s" 4
1243 .el .IP "Can't locate \f(CW%s\fR" 4
1244 .IX Item "Can't locate %s"
1245 (F) You said to \f(CW\*(C`do\*(C'\fR (or \f(CW\*(C`require\*(C'\fR, or \f(CW\*(C`use\*(C'\fR) a file that couldn't be found.
1246 Perl looks for the file in all the locations mentioned in \f(CW@INC\fR, unless
1247 the file name included the full path to the file. Perhaps you need
1248 to set the PERL5LIB or PERL5OPT environment variable to say where the
1249 extra library is, or maybe the script needs to add the library name
1250 to \f(CW@INC\fR. Or maybe you just misspelled the name of the file. See
1251 "require" in perlfunc and lib.
1252 .ie n .IP "Can't locate auto/%s.al in @INC" 4
1253 .el .IP "Can't locate auto/%s.al in \f(CW@INC\fR" 4
1254 .IX Item "Can't locate auto/%s.al in @INC"
1255 (F) A function (or method) was called in a package which allows
1256 autoload, but there is no function to autoload. Most probable causes
1257 are a misprint in a function/method name or a failure to \f(CW\*(C`AutoSplit\*(C'\fR
1258 the file, say, by doing \f(CW\*(C`make install\*(C'\fR.
1259 .ie n .IP "Can't locate loadable object for module %s in @INC" 4
1260 .el .IP "Can't locate loadable object for module \f(CW%s\fR in \f(CW@INC\fR" 4
1261 .IX Item "Can't locate loadable object for module %s in @INC"
1262 (F) The module you loaded is trying to load an external library, like
1263 for example, \fIfoo.so\fR or \fIbar.dll\fR, but the DynaLoader module was
1264 unable to locate this library. See DynaLoader.
1265 .IP "Can't locate object method ""%s"" via package ""%s""" 4
1266 .IX Item "Can't locate object method ""%s"" via package ""%s"""
1267 (F) You called a method correctly, and it correctly indicated a package
1268 functioning as a class, but that package doesn't define that particular
1269 method, nor does any of its base classes. See perlobj.
1270 .IP "Can't locate object method ""%s"" via package ""%s"" (perhaps you forgot to load ""%s""?)" 4
1271 .IX Item "Can't locate object method ""%s"" via package ""%s"" (perhaps you forgot to load ""%s""?)"
1272 (F) You called a method on a class that did not exist, and the method
1273 could not be found in UNIVERSAL. This often means that a method
1274 requires a package that has not been loaded.
1275 .ie n .IP "Can't locate object method ""INC"", nor ""INCDIR"" nor string overload via package ""%s"" %s in @INC" 4
1276 .el .IP "Can't locate object method ""INC"", nor ""INCDIR"" nor string overload via package ""%s"" \f(CW%s\fR in \f(CW@INC\fR" 4
1277 .IX Item "Can't locate object method ""INC"", nor ""INCDIR"" nor string overload via package ""%s"" %s in @INC"
1278 (F) You pushed an object, either directly or via an array reference hook,
1279 into \f(CW@INC\fR, but the object doesn't support any known hook methods, nor
1280 a string overload and is also not a blessed CODE reference. In short the
1281 \&\f(CW\*(C`require\*(C'\fR function does not know what to do with the object.
1282 See also "require" in perlfunc.
1283 .ie n .IP "Attempt to call undefined %s method with arguments (""%s""%s) via package ""%s"" (Perhaps you forgot to load the package?)" 4
1284 .el .IP "Attempt to call undefined \f(CW%s\fR method with arguments (""%s""%s) via package ""%s"" (Perhaps you forgot to load the package?)" 4
1285 .IX Item "Attempt to call undefined %s method with arguments (""%s""%s) via package ""%s"" (Perhaps you forgot to load the package?)"
1286 (D deprecated::missing_import_called_with_args) You called the
1287 \&\f(CWimport()\fR or \f(CWunimport()\fR method of a class that has no import method
1288 defined in its inheritance graph, and passed an argument to the method.
1289 This is very often the sign of a misspelled package name in a use or
1290 require statement that has silently succeded due to a case insensitive
1291 file system.
1292 .Sp
1293 Another common reason this may happen is when mistakenly attempting to
1294 import or unimport a symbol from a class definition or package which
1295 does not use \f(CW\*(C`Exporter\*(C'\fR or otherwise define its own \f(CW\*(C`import\*(C'\fR or
1296 \&\f(CW\*(C`unimport\*(C'\fR method.
1297 .ie n .IP "Can't locate package %s for @%s::ISA" 4
1298 .el .IP "Can't locate package \f(CW%s\fR for @%s::ISA" 4
1299 .IX Item "Can't locate package %s for @%s::ISA"
1300 (W syntax) The \f(CW@ISA\fR array contained the name of another package that
1301 doesn't seem to exist.
1302 .IP "Can't locate PerlIO%s" 4
1303 .IX Item "Can't locate PerlIO%s"
1304 (F) You tried to use in \fBopen()\fR a PerlIO layer that does not exist,
1305 e.g. open(FH, ">:nosuchlayer", "somefile").
1306 .ie n .IP "Can't make list assignment to %ENV on this system" 4
1307 .el .IP "Can't make list assignment to \f(CW%ENV\fR on this system" 4
1308 .IX Item "Can't make list assignment to %ENV on this system"
1309 (F) List assignment to \f(CW%ENV\fR is not supported on some systems, notably
1310 VMS.
1311 .ie n .IP "Can't make loaded symbols global on this platform while loading %s" 4
1312 .el .IP "Can't make loaded symbols global on this platform while loading \f(CW%s\fR" 4
1313 .IX Item "Can't make loaded symbols global on this platform while loading %s"
1314 (S) A module passed the flag 0x01 to \fBDynaLoader::dl_load_file()\fR to request
1315 that symbols from the stated file are made available globally within the
1316 process, but that functionality is not available on this platform. Whilst
1317 the module likely will still work, this may prevent the perl interpreter
1318 from loading other XS-based extensions which need to link directly to
1319 functions defined in the C or XS code in the stated file.
1320 .ie n .IP "Can't modify %s in %s" 4
1321 .el .IP "Can't modify \f(CW%s\fR in \f(CW%s\fR" 4
1322 .IX Item "Can't modify %s in %s"
1323 (F) You aren't allowed to assign to the item indicated, or otherwise try
1324 to change it, such as with an auto-increment.
1325 .IP "Can't modify non-lvalue subroutine call of &%s" 4
1326 .IX Item "Can't modify non-lvalue subroutine call of &%s"
1327 .PD 0
1328 .ie n .IP "Can't modify non-lvalue subroutine call of &%s in %s" 4
1329 .el .IP "Can't modify non-lvalue subroutine call of &%s in \f(CW%s\fR" 4
1330 .IX Item "Can't modify non-lvalue subroutine call of &%s in %s"
1331 .PD
1332 (F) Subroutines meant to be used in lvalue context should be declared as
1333 such. See "Lvalue subroutines" in perlsub.
1334 .ie n .IP "Can't modify reference to %s in %s assignment" 4
1335 .el .IP "Can't modify reference to \f(CW%s\fR in \f(CW%s\fR assignment" 4
1336 .IX Item "Can't modify reference to %s in %s assignment"
1337 (F) Only a limited number of constructs can be used as the argument to a
1338 reference constructor on the left-hand side of an assignment, and what
1339 you used was not one of them. See "Assigning to References" in perlref.
1340 .IP "Can't modify reference to localized parenthesized array in list assignment" 4
1341 .IX Item "Can't modify reference to localized parenthesized array in list assignment"
1342 (F) Assigning to \f(CW\*(C`\elocal(@array)\*(C'\fR or \f(CW\*(C`\e(local @array)\*(C'\fR is not supported, as
1343 it is not clear exactly what it should do. If you meant to make \f(CW@array\fR
1344 refer to some other array, use \f(CW\*(C`\e@array = \e@other_array\*(C'\fR. If you want to
1345 make the elements of \f(CW@array\fR aliases of the scalars referenced on the
1346 right-hand side, use \f(CW\*(C`\e(@array) = @scalar_refs\*(C'\fR.
1347 .IP "Can't modify reference to parenthesized hash in list assignment" 4
1348 .IX Item "Can't modify reference to parenthesized hash in list assignment"
1349 (F) Assigning to \f(CW\*(C`\e(%hash)\*(C'\fR is not supported. If you meant to make \f(CW%hash\fR
1350 refer to some other hash, use \f(CW\*(C`\e%hash = \e%other_hash\*(C'\fR. If you want to
1351 make the elements of \f(CW%hash\fR into aliases of the scalars referenced on the
1352 right-hand side, use a hash slice: \f(CW\*(C`\e@hash{@keys} = @those_scalar_refs\*(C'\fR.
1353 .IP "Can't msgrcv to read-only var" 4
1354 .IX Item "Can't msgrcv to read-only var"
1355 (F) The target of a msgrcv must be modifiable to be used as a receive
1356 buffer.
1357 .IP "Can't ""next"" outside a loop block" 4
1358 .IX Item "Can't ""next"" outside a loop block"
1359 (F) A "next" statement was executed to reiterate the current block, but
1360 there isn't a current block. Note that an "if" or "else" block doesn't
1361 count as a "loopish" block, as doesn't a block given to \fBsort()\fR, \fBmap()\fR or
1362 \&\fBgrep()\fR. You can usually double the curlies to get the same effect
1363 though, because the inner curlies will be considered a block that loops
1364 once. See "next" in perlfunc.
1365 .ie n .IP "Can't open %s: %s" 4
1366 .el .IP "Can't open \f(CW%s:\fR \f(CW%s\fR" 4
1367 .IX Item "Can't open %s: %s"
1368 (S inplace) The implicit opening of a file through use of the \f(CW\*(C`<>\*(C'\fR
1369 filehandle, either implicitly under the \f(CW\*(C`\-n\*(C'\fR or \f(CW\*(C`\-p\*(C'\fR command-line
1370 switches, or explicitly, failed for the indicated reason. Usually
1371 this is because you don't have read permission for a file which
1372 you named on the command line.
1373 .Sp
1374 (F) You tried to call perl with the \fB\-e\fR switch, but \fI/dev/null\fR (or
1375 your operating system's equivalent) could not be opened.
1376 .IP "Can't open a reference" 4
1377 .IX Item "Can't open a reference"
1378 (W io) You tried to open a scalar reference for reading or writing,
1379 using the 3\-arg \fBopen()\fR syntax:
1380 .Sp
1381 .Vb 1
1382 \& open FH, \*(Aq>\*(Aq, $ref;
1383 .Ve
1384 .Sp
1385 but your version of perl is compiled without perlio, and this form of
1386 open is not supported.
1387 .IP "Can't open bidirectional pipe" 4
1388 .IX Item "Can't open bidirectional pipe"
1389 (W pipe) You tried to say \f(CW\*(C`open(CMD, "|cmd|")\*(C'\fR, which is not supported.
1390 You can try any of several modules in the Perl library to do this, such
1391 as IPC::Open2. Alternately, direct the pipe's output to a file using
1392 ">", and then read it in under a different file handle.
1393 .ie n .IP "Can't open error file %s as stderr" 4
1394 .el .IP "Can't open error file \f(CW%s\fR as stderr" 4
1395 .IX Item "Can't open error file %s as stderr"
1396 (F) An error peculiar to VMS. Perl does its own command line
1397 redirection, and couldn't open the file specified after '2>' or '2>>' on
1398 the command line for writing.
1399 .ie n .IP "Can't open input file %s as stdin" 4
1400 .el .IP "Can't open input file \f(CW%s\fR as stdin" 4
1401 .IX Item "Can't open input file %s as stdin"
1402 (F) An error peculiar to VMS. Perl does its own command line
1403 redirection, and couldn't open the file specified after '<' on the
1404 command line for reading.
1405 .ie n .IP "Can't open output file %s as stdout" 4
1406 .el .IP "Can't open output file \f(CW%s\fR as stdout" 4
1407 .IX Item "Can't open output file %s as stdout"
1408 (F) An error peculiar to VMS. Perl does its own command line
1409 redirection, and couldn't open the file specified after '>' or '>>' on
1410 the command line for writing.
1411 .ie n .IP "Can't open output pipe (name: %s)" 4
1412 .el .IP "Can't open output pipe (name: \f(CW%s\fR)" 4
1413 .IX Item "Can't open output pipe (name: %s)"
1414 (P) An error peculiar to VMS. Perl does its own command line
1415 redirection, and couldn't open the pipe into which to send data destined
1416 for stdout.
1417 .ie n .IP "Can't open perl script ""%s"": %s" 4
1418 .el .IP "Can't open perl script ""%s"": \f(CW%s\fR" 4
1419 .IX Item "Can't open perl script ""%s"": %s"
1420 (F) The script you specified can't be opened for the indicated reason.
1421 .Sp
1422 If you're debugging a script that uses #!, and normally relies on the
1423 shell's \f(CW$PATH\fR search, the \-S option causes perl to do that search, so
1424 you don't have to type the path or \f(CW\`which $scriptname\`\fR.
1425 .IP "Can't read CRTL environ" 4
1426 .IX Item "Can't read CRTL environ"
1427 (S) A warning peculiar to VMS. Perl tried to read an element of \f(CW%ENV\fR
1428 from the CRTL's internal environment array and discovered the array was
1429 missing. You need to figure out where your CRTL misplaced its environ
1430 or define \fIPERL_ENV_TABLES\fR (see perlvms) so that environ is not
1431 searched.
1432 .IP "Can't redeclare ""%s"" in ""%s""" 4
1433 .IX Item "Can't redeclare ""%s"" in ""%s"""
1434 (F) A "my", "our" or "state" declaration was found within another declaration,
1435 such as \f(CW\*(C`my ($x, my($y), $z)\*(C'\fR or \f(CW\*(C`our (my $x)\*(C'\fR.
1436 .IP "Can't ""redo"" outside a loop block" 4
1437 .IX Item "Can't ""redo"" outside a loop block"
1438 (F) A "redo" statement was executed to restart the current block, but
1439 there isn't a current block. Note that an "if" or "else" block doesn't
1440 count as a "loopish" block, as doesn't a block given to \fBsort()\fR, \fBmap()\fR
1441 or \fBgrep()\fR. You can usually double the curlies to get the same effect
1442 though, because the inner curlies will be considered a block that
1443 loops once. See "redo" in perlfunc.
1444 .ie n .IP "Can't remove %s: %s, skipping file" 4
1445 .el .IP "Can't remove \f(CW%s:\fR \f(CW%s\fR, skipping file" 4
1446 .IX Item "Can't remove %s: %s, skipping file"
1447 (S inplace) You requested an inplace edit without creating a backup
1448 file. Perl was unable to remove the original file to replace it with
1449 the modified file. The file was left unmodified.
1450 .ie n .IP "Can't rename in-place work file '%s' to '%s': %s" 4
1451 .el .IP "Can't rename in-place work file '%s' to '%s': \f(CW%s\fR" 4
1452 .IX Item "Can't rename in-place work file '%s' to '%s': %s"
1453 (F) When closed implicitly, the temporary file for in-place editing
1454 couldn't be renamed to the original filename.
1455 .ie n .IP "Can't rename %s to %s: %s, skipping file" 4
1456 .el .IP "Can't rename \f(CW%s\fR to \f(CW%s:\fR \f(CW%s\fR, skipping file" 4
1457 .IX Item "Can't rename %s to %s: %s, skipping file"
1458 (F) The rename done by the \fB\-i\fR switch failed for some reason,
1459 probably because you don't have write permission to the directory.
1460 .ie n .IP "Can't reopen input pipe (name: %s) in binary mode" 4
1461 .el .IP "Can't reopen input pipe (name: \f(CW%s\fR) in binary mode" 4
1462 .IX Item "Can't reopen input pipe (name: %s) in binary mode"
1463 (P) An error peculiar to VMS. Perl thought stdin was a pipe, and tried
1464 to reopen it to accept binary data. Alas, it failed.
1465 .IP "Can't represent character for Ox%X on this platform" 4
1466 .IX Item "Can't represent character for Ox%X on this platform"
1467 (F) There is a hard limit to how big a character code point can be due
1468 to the fundamental properties of UTF\-8, especially on EBCDIC
1469 platforms. The given code point exceeds that. The only work-around is
1470 to not use such a large code point.
1471 .ie n .IP "Can't reset %ENV on this system" 4
1472 .el .IP "Can't reset \f(CW%ENV\fR on this system" 4
1473 .IX Item "Can't reset %ENV on this system"
1474 (F) You called \f(CWreset(\*(AqE\*(Aq)\fR or similar, which tried to reset
1475 all variables in the current package beginning with "E". In
1476 the main package, that includes \f(CW%ENV\fR. Resetting \f(CW%ENV\fR is not
1477 supported on some systems, notably VMS.
1478 .IP "Can't resolve method ""%s"" overloading ""%s"" in package ""%s""" 4
1479 .IX Item "Can't resolve method ""%s"" overloading ""%s"" in package ""%s"""
1480 (F)(P) Error resolving overloading specified by a method name (as
1481 opposed to a subroutine reference): no such method callable via the
1482 package. If the method name is \f(CW\*(C`???\*(C'\fR, this is an internal error.
1483 .ie n .IP "Can't return %s from lvalue subroutine" 4
1484 .el .IP "Can't return \f(CW%s\fR from lvalue subroutine" 4
1485 .IX Item "Can't return %s from lvalue subroutine"
1486 (F) Perl detected an attempt to return illegal lvalues (such as
1487 temporary or readonly values) from a subroutine used as an lvalue. This
1488 is not allowed.
1489 .IP "Can't return outside a subroutine" 4
1490 .IX Item "Can't return outside a subroutine"
1491 (F) The return statement was executed in mainline code, that is, where
1492 there was no subroutine call to return out of. See perlsub.
1493 .ie n .IP "Can't return %s to lvalue scalar context" 4
1494 .el .IP "Can't return \f(CW%s\fR to lvalue scalar context" 4
1495 .IX Item "Can't return %s to lvalue scalar context"
1496 (F) You tried to return a complete array or hash from an lvalue
1497 subroutine, but you called the subroutine in a way that made Perl
1498 think you meant to return only one value. You probably meant to
1499 write parentheses around the call to the subroutine, which tell
1500 Perl that the call should be in list context.
1501 .ie n .IP "Can't take log of %g" 4
1502 .el .IP "Can't take log of \f(CW%g\fR" 4
1503 .IX Item "Can't take log of %g"
1504 (F) For ordinary real numbers, you can't take the logarithm of a
1505 negative number or zero. There's a Math::Complex package that comes
1506 standard with Perl, though, if you really want to do that for the
1507 negative numbers.
1508 .ie n .IP "Can't take sqrt of %g" 4
1509 .el .IP "Can't take sqrt of \f(CW%g\fR" 4
1510 .IX Item "Can't take sqrt of %g"
1511 (F) For ordinary real numbers, you can't take the square root of a
1512 negative number. There's a Math::Complex package that comes standard
1513 with Perl, though, if you really want to do that.
1514 .IP "Can't undef active subroutine" 4
1515 .IX Item "Can't undef active subroutine"
1516 (F) You can't undefine a routine that's currently running. You can,
1517 however, redefine it while it's running, and you can even undef the
1518 redefined subroutine while the old routine is running. Go figure.
1519 .IP "Can't unweaken a nonreference" 4
1520 .IX Item "Can't unweaken a nonreference"
1521 (F) You attempted to unweaken something that was not a reference. Only
1522 references can be unweakened.
1523 .ie n .IP "Can't upgrade %s (%d) to %d" 4
1524 .el .IP "Can't upgrade \f(CW%s\fR (%d) to \f(CW%d\fR" 4
1525 .IX Item "Can't upgrade %s (%d) to %d"
1526 (P) The internal sv_upgrade routine adds "members" to an SV, making it
1527 into a more specialized kind of SV. The top several SV types are so
1528 specialized, however, that they cannot be interconverted. This message
1529 indicates that such a conversion was attempted.
1530 .IP "Can't use '%c' after \-mname" 4
1531 .IX Item "Can't use '%c' after -mname"
1532 (F) You tried to call perl with the \fB\-m\fR switch, but you put something
1533 other than "=" after the module name.
1534 .IP "Can't use a hash as a reference" 4
1535 .IX Item "Can't use a hash as a reference"
1536 (F) You tried to use a hash as a reference, as in
1537 \&\f(CW\*(C`%foo\->{"bar"}\*(C'\fR or \f(CW\*(C`%$ref\->{"hello"}\*(C'\fR. Versions of perl
1538 <= 5.22.0 used to allow this syntax, but shouldn't
1539 have. This was deprecated in perl 5.6.1.
1540 .IP "Can't use an array as a reference" 4
1541 .IX Item "Can't use an array as a reference"
1542 (F) You tried to use an array as a reference, as in
1543 \&\f(CW\*(C`@foo\->[23]\*(C'\fR or \f(CW\*(C`@$ref\->[99]\*(C'\fR. Versions of perl <= 5.22.0
1544 used to allow this syntax, but shouldn't have. This
1545 was deprecated in perl 5.6.1.
1546 .IP "Can't use anonymous symbol table for method lookup" 4
1547 .IX Item "Can't use anonymous symbol table for method lookup"
1548 (F) The internal routine that does method lookup was handed a symbol
1549 table that doesn't have a name. Symbol tables can become anonymous
1550 for example by undefining stashes: \f(CW\*(C`undef %Some::Package::\*(C'\fR.
1551 .ie n .IP "Can't use an undefined value as %s reference" 4
1552 .el .IP "Can't use an undefined value as \f(CW%s\fR reference" 4
1553 .IX Item "Can't use an undefined value as %s reference"
1554 (F) A value used as either a hard reference or a symbolic reference must
1555 be a defined value. This helps to delurk some insidious errors.
1556 .ie n .IP "Can't use bareword (""%s"") as %s ref while ""strict refs"" in use" 4
1557 .el .IP "Can't use bareword (""%s"") as \f(CW%s\fR ref while ""strict refs"" in use" 4
1558 .IX Item "Can't use bareword (""%s"") as %s ref while ""strict refs"" in use"
1559 (F) Only hard references are allowed by "strict refs". Symbolic
1560 references are disallowed. See perlref.
1561 .IP "Can't use %! because Errno.pm is not available" 4
1562 .IX Item "Can't use %! because Errno.pm is not available"
1563 (F) The first time the \f(CW\*(C`%!\*(C'\fR hash is used, perl automatically loads the
1564 Errno.pm module. The Errno module is expected to tie the %! hash to
1565 provide symbolic names for \f(CW$!\fR errno values.
1566 .ie n .IP "Can't use both '<' and '>' after type '%c' in %s" 4
1567 .el .IP "Can't use both '<' and '>' after type '%c' in \f(CW%s\fR" 4
1568 .IX Item "Can't use both '<' and '>' after type '%c' in %s"
1569 (F) A type cannot be forced to have both big-endian and little-endian
1570 byte-order at the same time, so this combination of modifiers is not
1571 allowed. See "pack" in perlfunc.
1572 .IP "Can't use 'defined(@array)' (Maybe you should just omit the \fBdefined()\fR?)" 4
1573 .IX Item "Can't use 'defined(@array)' (Maybe you should just omit the defined()?)"
1574 (F) \fBdefined()\fR is not useful on arrays because it
1575 checks for an undefined \fIscalar\fR value. If you want to see if the
1576 array is empty, just use \f(CW\*(C`if (@array) { # not empty }\*(C'\fR for example.
1577 .IP "Can't use 'defined(%hash)' (Maybe you should just omit the \fBdefined()\fR?)" 4
1578 .IX Item "Can't use 'defined(%hash)' (Maybe you should just omit the defined()?)"
1579 (F) \f(CWdefined()\fR is not usually right on hashes.
1580 .Sp
1581 Although \f(CW\*(C`defined %hash\*(C'\fR is false on a plain not-yet-used hash, it
1582 becomes true in several non-obvious circumstances, including iterators,
1583 weak references, stash names, even remaining true after \f(CW\*(C`undef %hash\*(C'\fR.
1584 These things make \f(CW\*(C`defined %hash\*(C'\fR fairly useless in practice, so it now
1585 generates a fatal error.
1586 .Sp
1587 If a check for non-empty is what you wanted then just put it in boolean
1588 context (see "Scalar values" in perldata):
1589 .Sp
1590 .Vb 3
1591 \& if (%hash) {
1592 \& # not empty
1593 \& }
1594 .Ve
1595 .Sp
1596 If you had \f(CW\*(C`defined %Foo::Bar::QUUX\*(C'\fR to check whether such a package
1597 variable exists then that's never really been reliable, and isn't
1598 a good way to enquire about the features of a package, or whether
1599 it's loaded, etc.
1600 .ie n .IP "Can't use %s for loop variable" 4
1601 .el .IP "Can't use \f(CW%s\fR for loop variable" 4
1602 .IX Item "Can't use %s for loop variable"
1603 (P) The parser got confused when trying to parse a \f(CW\*(C`foreach\*(C'\fR loop.
1604 .ie n .IP "Can't use global %s in %s" 4
1605 .el .IP "Can't use global \f(CW%s\fR in \f(CW%s\fR" 4
1606 .IX Item "Can't use global %s in %s"
1607 (F) You tried to declare a magical variable as a lexical variable. This
1608 is not allowed, because the magic can be tied to only one location
1609 (namely the global variable) and it would be incredibly confusing to
1610 have variables in your program that looked like magical variables but
1611 weren't.
1612 .ie n .IP "Can't use '%c' in a group with different byte-order in %s" 4
1613 .el .IP "Can't use '%c' in a group with different byte-order in \f(CW%s\fR" 4
1614 .IX Item "Can't use '%c' in a group with different byte-order in %s"
1615 (F) You attempted to force a different byte-order on a type
1616 that is already inside a group with a byte-order modifier.
1617 For example you cannot force little-endianness on a type that
1618 is inside a big-endian group.
1619 .ie n .IP "Can't use ""my %s"" in sort comparison" 4
1620 .el .IP "Can't use ""my \f(CW%s\fR"" in sort comparison" 4
1621 .IX Item "Can't use ""my %s"" in sort comparison"
1622 (F) The global variables \f(CW$a\fR and \f(CW$b\fR are reserved for sort comparisons.
1623 You mentioned \f(CW$a\fR or \f(CW$b\fR in the same line as the <=> or cmp operator,
1624 and the variable had earlier been declared as a lexical variable.
1625 Either qualify the sort variable with the package name, or rename the
1626 lexical variable.
1627 .ie n .IP "Can't use %s ref as %s ref" 4
1628 .el .IP "Can't use \f(CW%s\fR ref as \f(CW%s\fR ref" 4
1629 .IX Item "Can't use %s ref as %s ref"
1630 (F) You've mixed up your reference types. You have to dereference a
1631 reference of the type needed. You can use the \fBref()\fR function to
1632 test the type of the reference, if need be.
1633 .ie n .IP "Can't use string (""%s"") as %s ref while ""strict refs"" in use" 4
1634 .el .IP "Can't use string (""%s"") as \f(CW%s\fR ref while ""strict refs"" in use" 4
1635 .IX Item "Can't use string (""%s"") as %s ref while ""strict refs"" in use"
1636 .PD 0
1637 .ie n .IP "Can't use string (""%s""...) as %s ref while ""strict refs"" in use" 4
1638 .el .IP "Can't use string (""%s""...) as \f(CW%s\fR ref while ""strict refs"" in use" 4
1639 .IX Item "Can't use string (""%s""...) as %s ref while ""strict refs"" in use"
1640 .PD
1641 (F) You've told Perl to dereference a string, something which
1642 \&\f(CW\*(C`use strict\*(C'\fR blocks to prevent it happening accidentally. See
1643 "Symbolic references" in perlref. This can be triggered by an \f(CW\*(C`@\*(C'\fR or \f(CW\*(C`$\*(C'\fR
1644 in a double-quoted string immediately before interpolating a variable,
1645 for example in \f(CW"user @$twitter_id"\fR, which says to treat the contents
1646 of \f(CW$twitter_id\fR as an array reference; use a \f(CW\*(C`\e\*(C'\fR to have a literal \f(CW\*(C`@\*(C'\fR
1647 symbol followed by the contents of \f(CW$twitter_id\fR: \f(CW"user \e@$twitter_id"\fR.
1648 .ie n .IP "Can't use subscript on %s" 4
1649 .el .IP "Can't use subscript on \f(CW%s\fR" 4
1650 .IX Item "Can't use subscript on %s"
1651 (F) The compiler tried to interpret a bracketed expression as a
1652 subscript. But to the left of the brackets was an expression that
1653 didn't look like a hash or array reference, or anything else subscriptable.
1654 .IP "Can't use \e%c to mean $%c in expression" 4
1655 .IX Item "Can't use %c to mean $%c in expression"
1656 (W syntax) In an ordinary expression, backslash is a unary operator that
1657 creates a reference to its argument. The use of backslash to indicate a
1658 backreference to a matched substring is valid only as part of a regular
1659 expression pattern. Trying to do this in ordinary Perl code produces a
1660 value that prints out looking like \fBSCALAR\fR\|(0xdecaf). Use the \f(CW$1\fR form
1661 instead.
1662 .IP "Can't weaken a nonreference" 4
1663 .IX Item "Can't weaken a nonreference"
1664 (F) You attempted to weaken something that was not a reference. Only
1665 references can be weakened.
1666 .IP "Can't ""when"" outside a topicalizer" 4
1667 .IX Item "Can't ""when"" outside a topicalizer"
1668 (F) You have used a \fBwhen()\fR block that is neither inside a \f(CW\*(C`foreach\*(C'\fR
1669 loop nor a \f(CW\*(C`given\*(C'\fR block. (Note that this error is issued on exit
1670 from the \f(CW\*(C`when\*(C'\fR block, so you won't get the error if the match fails,
1671 or if you use an explicit \f(CW\*(C`continue\*(C'\fR.)
1672 .IP "Can't x= to read-only value" 4
1673 .IX Item "Can't x= to read-only value"
1674 (F) You tried to repeat a constant value (often the undefined value)
1675 with an assignment operator, which implies modifying the value itself.
1676 Perhaps you need to copy the value to a temporary, and repeat that.
1677 .IP "catch block requires a (VAR)" 4
1678 .IX Item "catch block requires a (VAR)"
1679 (F) You tried to use the \f(CW\*(C`try\*(C'\fR and \f(CW\*(C`catch\*(C'\fR syntax of \f(CW\*(C`use feature \*(Aqtry\*(Aq\*(C'\fR
1680 but did not include the error variable in the \f(CW\*(C`catch\*(C'\fR block. The
1681 parenthesized variable name is not optional, unlike in some other forms of
1682 syntax you may be familiar with from CPAN modules or other languages.
1683 .Sp
1684 The required syntax is
1685 .Sp
1686 .Vb 2
1687 \& try { ... }
1688 \& catch ($var) { ... }
1689 .Ve
1690 .IP "Changing use VERSION while another use VERSION is in scope is now deprecated" 4
1691 .IX Item "Changing use VERSION while another use VERSION is in scope is now deprecated"
1692 (W deprecated) Once you have a \f(CW\*(C`use VERSION\*(C'\fR statement in scope, any
1693 \&\f(CW\*(C`use VERSION\*(C'\fR statement that requests a different version is now deprecated,
1694 due to the increasing complexity of swapping from one prevailing version to
1695 another.
1696 .Sp
1697 It is suggested that you do not try to mix multiple different version
1698 declarations within the same file as it leads to complex behaviours about the
1699 visibility of features and builtin functions, as well as confusing human
1700 readers.
1701 .Sp
1702 If it is essential to have different \f(CW\*(C`use VERSION\*(C'\fR declarations in different
1703 regions of the same file, you should surround each one by its own enclosing
1704 scope so the two do not mix.
1705 .Sp
1706 .Vb 8
1707 \& {
1708 \& use v5.20;
1709 \& ...
1710 \& }
1711 \& {
1712 \& use v5.36;
1713 \& ...
1714 \& }
1715 .Ve
1716 .IP "Character following ""\ec"" must be printable ASCII" 4
1717 .IX Item "Character following ""c"" must be printable ASCII"
1718 (F) In \f(CW\*(C`\ec\fR\f(CIX\fR\f(CW\*(C'\fR, \fIX\fR must be a printable (non-control) ASCII character.
1719 .Sp
1720 Note that ASCII characters that don't map to control characters are
1721 discouraged, and will generate the warning (when enabled)
1722 ""\ec%c" is more clearly written simply as "%s"".
1723 .IP "Character following \e%c must be '{' or a single-character Unicode property name in regex; marked by <\-\- HERE in m/%s/" 4
1724 .IX Item "Character following %c must be '{' or a single-character Unicode property name in regex; marked by <-- HERE in m/%s/"
1725 (F) (In the above the \f(CW%c\fR is replaced by either \f(CW\*(C`p\*(C'\fR or \f(CW\*(C`P\*(C'\fR.) You
1726 specified something that isn't a legal Unicode property name. Most
1727 Unicode properties are specified by \f(CW\*(C`\ep{...}\*(C'\fR. But if the name is a
1728 single character one, the braces may be omitted.
1729 .IP "Character in 'C' format wrapped in pack" 4
1730 .IX Item "Character in 'C' format wrapped in pack"
1731 (W pack) You said
1732 .Sp
1733 .Vb 1
1734 \& pack("C", $x)
1735 .Ve
1736 .Sp
1737 where \f(CW$x\fR is either less than 0 or more than 255; the \f(CW"C"\fR format is
1738 only for encoding native operating system characters (ASCII, EBCDIC,
1739 and so on) and not for Unicode characters, so Perl behaved as if you meant
1740 .Sp
1741 .Vb 1
1742 \& pack("C", $x & 255)
1743 .Ve
1744 .Sp
1745 If you actually want to pack Unicode codepoints, use the \f(CW"U"\fR format
1746 instead.
1747 .IP "Character in 'c' format wrapped in pack" 4
1748 .IX Item "Character in 'c' format wrapped in pack"
1749 (W pack) You said
1750 .Sp
1751 .Vb 1
1752 \& pack("c", $x)
1753 .Ve
1754 .Sp
1755 where \f(CW$x\fR is either less than \-128 or more than 127; the \f(CW"c"\fR format
1756 is only for encoding native operating system characters (ASCII, EBCDIC,
1757 and so on) and not for Unicode characters, so Perl behaved as if you meant
1758 .Sp
1759 .Vb 1
1760 \& pack("c", $x & 255);
1761 .Ve
1762 .Sp
1763 If you actually want to pack Unicode codepoints, use the \f(CW"U"\fR format
1764 instead.
1765 .IP "Character in '%c' format wrapped in unpack" 4
1766 .IX Item "Character in '%c' format wrapped in unpack"
1767 (W unpack) You tried something like
1768 .Sp
1769 .Vb 1
1770 \& unpack("H", "\ex{2a1}")
1771 .Ve
1772 .Sp
1773 where the format expects to process a byte (a character with a value
1774 below 256), but a higher value was provided instead. Perl uses the
1775 value modulus 256 instead, as if you had provided:
1776 .Sp
1777 .Vb 1
1778 \& unpack("H", "\ex{a1}")
1779 .Ve
1780 .IP "Character in 'W' format wrapped in pack" 4
1781 .IX Item "Character in 'W' format wrapped in pack"
1782 (W pack) You said
1783 .Sp
1784 .Vb 1
1785 \& pack("U0W", $x)
1786 .Ve
1787 .Sp
1788 where \f(CW$x\fR is either less than 0 or more than 255. However, \f(CW\*(C`U0\*(C'\fR\-mode
1789 expects all values to fall in the interval [0, 255], so Perl behaved
1790 as if you meant:
1791 .Sp
1792 .Vb 1
1793 \& pack("U0W", $x & 255)
1794 .Ve
1795 .IP "Character(s) in '%c' format wrapped in pack" 4
1796 .IX Item "Character(s) in '%c' format wrapped in pack"
1797 (W pack) You tried something like
1798 .Sp
1799 .Vb 1
1800 \& pack("u", "\ex{1f3}b")
1801 .Ve
1802 .Sp
1803 where the format expects to process a sequence of bytes (character with a
1804 value below 256), but some of the characters had a higher value. Perl
1805 uses the character values modulus 256 instead, as if you had provided:
1806 .Sp
1807 .Vb 1
1808 \& pack("u", "\ex{f3}b")
1809 .Ve
1810 .IP "Character(s) in '%c' format wrapped in unpack" 4
1811 .IX Item "Character(s) in '%c' format wrapped in unpack"
1812 (W unpack) You tried something like
1813 .Sp
1814 .Vb 1
1815 \& unpack("s", "\ex{1f3}b")
1816 .Ve
1817 .Sp
1818 where the format expects to process a sequence of bytes (character with a
1819 value below 256), but some of the characters had a higher value. Perl
1820 uses the character values modulus 256 instead, as if you had provided:
1821 .Sp
1822 .Vb 1
1823 \& unpack("s", "\ex{f3}b")
1824 .Ve
1825 .ie n .IP "charnames alias definitions may not contain a sequence of multiple spaces; marked by <\-\-\ HERE in %s" 4
1826 .el .IP "charnames alias definitions may not contain a sequence of multiple spaces; marked by <\-\-\ HERE in \f(CW%s\fR" 4
1827 .IX Item "charnames alias definitions may not contain a sequence of multiple spaces; marked by <--\ HERE in %s"
1828 (F) You defined a character name which had multiple space characters
1829 in a row. Change them to single spaces. Usually these names are
1830 defined in the \f(CW\*(C`:alias\*(C'\fR import argument to \f(CW\*(C`use charnames\*(C'\fR, but they
1831 could be defined by a translator installed into \f(CW$^H{charnames}\fR. See
1832 "CUSTOM ALIASES" in charnames.
1833 .ie n .IP "\fBchdir()\fR on unopened filehandle %s" 4
1834 .el .IP "\fBchdir()\fR on unopened filehandle \f(CW%s\fR" 4
1835 .IX Item "chdir() on unopened filehandle %s"
1836 (W unopened) You tried \fBchdir()\fR on a filehandle that was never opened.
1837 .IP """\ec%c"" is more clearly written simply as ""%s""" 4
1838 .IX Item """c%c"" is more clearly written simply as ""%s"""
1839 (W syntax) The \f(CW\*(C`\ec\fR\f(CIX\fR\f(CW\*(C'\fR construct is intended to be a way to specify
1840 non-printable characters. You used it for a printable one, which
1841 is better written as simply itself, perhaps preceded by a backslash
1842 for non-word characters. Doing it the way you did is not portable
1843 between ASCII and EBCDIC platforms.
1844 .IP "Class already has a superclass, cannot add another" 4
1845 .IX Item "Class already has a superclass, cannot add another"
1846 (F) You attempted to specify a second superclass for a \f(CW\*(C`class\*(C'\fR by using
1847 the \f(CW\*(C`:isa\*(C'\fR attribute, when one is already specified. Unlike classes
1848 whose instances are created with \f(CW\*(C`bless\*(C'\fR, classes created via the
1849 \&\f(CW\*(C`class\*(C'\fR keyword cannot have more than one superclass.
1850 .ie n .IP "Class attribute %s requires a value" 4
1851 .el .IP "Class attribute \f(CW%s\fR requires a value" 4
1852 .IX Item "Class attribute %s requires a value"
1853 (F) You specified an attribute for a class that would require a value to
1854 be passed in parentheses, but did not provide one. Remember that
1855 whitespace is \fBnot\fR permitted between the attribute name and its value;
1856 you must write this as
1857 .Sp
1858 .Vb 1
1859 \& class Example::Class :attr(VALUE) ...
1860 .Ve
1861 .IP "class is experimental" 4
1862 .IX Item "class is experimental"
1863 (S experimental::class) This warning is emitted if you use the \f(CW\*(C`class\*(C'\fR
1864 keyword of \f(CW\*(C`use feature \*(Aqclass\*(Aq\*(C'\fR. This keyword is currently
1865 experimental and its behaviour may change in future releases of Perl.
1866 .IP "Class :isa attribute requires a class but ""%s"" is not one" 4
1867 .IX Item "Class :isa attribute requires a class but ""%s"" is not one"
1868 (F) When creating a subclass using the \f(CW\*(C`class\*(C'\fR \f(CW\*(C`:isa\*(C'\fR attribute, the
1869 named superclass must also be a real class created using the \f(CW\*(C`class\*(C'\fR
1870 keyword.
1871 .IP "Cloning substitution context is unimplemented" 4
1872 .IX Item "Cloning substitution context is unimplemented"
1873 (F) Creating a new thread inside the \f(CW\*(C`s///\*(C'\fR operator is not supported.
1874 .ie n .IP "\fBclosedir()\fR attempted on invalid dirhandle %s" 4
1875 .el .IP "\fBclosedir()\fR attempted on invalid dirhandle \f(CW%s\fR" 4
1876 .IX Item "closedir() attempted on invalid dirhandle %s"
1877 (W io) The dirhandle you tried to close is either closed or not really
1878 a dirhandle. Check your control flow.
1879 .ie n .IP "\fBclose()\fR on unopened filehandle %s" 4
1880 .el .IP "\fBclose()\fR on unopened filehandle \f(CW%s\fR" 4
1881 .IX Item "close() on unopened filehandle %s"
1882 (W unopened) You tried to close a filehandle that was never opened.
1883 .IP "Closure prototype called" 4
1884 .IX Item "Closure prototype called"
1885 (F) If a closure has attributes, the subroutine passed to an attribute
1886 handler is the prototype that is cloned when a new closure is created.
1887 This subroutine cannot be called.
1888 .IP "\eC no longer supported in regex; marked by <\-\-\ HERE in m/%s/" 4
1889 .IX Item "C no longer supported in regex; marked by <--\ HERE in m/%s/"
1890 (F) The \eC character class used to allow a match of single byte
1891 within a multi-byte utf\-8 character, but was removed in v5.24 as
1892 it broke encapsulation and its implementation was extremely buggy.
1893 If you really need to process the individual bytes, you probably
1894 want to convert your string to one where each underlying byte is
1895 stored as a character, with \fButf8::encode()\fR.
1896 .IP "Code missing after '/'" 4
1897 .IX Item "Code missing after '/'"
1898 (F) You had a (sub\-)template that ends with a '/'. There must be
1899 another template code following the slash. See "pack" in perlfunc.
1900 .IP "Code point 0x%X is not Unicode, and not portable" 4
1901 .IX Item "Code point 0x%X is not Unicode, and not portable"
1902 (S non_unicode portable) You had a code point that has never been in any
1903 standard, so it is likely that languages other than Perl will NOT
1904 understand it. This code point also will not fit in a 32\-bit word on
1905 ASCII platforms and therefore is non-portable between systems.
1906 .Sp
1907 At one time, it was legal in some standards to have code points up to
1908 0x7FFF_FFFF, but not higher, and this code point is higher.
1909 .Sp
1910 Acceptance of these code points is a Perl extension, and you should
1911 expect that nothing other than Perl can handle them; Perl itself on
1912 EBCDIC platforms before v5.24 does not handle them.
1913 .Sp
1914 Perl also makes no guarantees that the representation of these code
1915 points won't change at some point in the future, say when machines
1916 become available that have larger than a 64\-bit word. At that time,
1917 files containing any of these, written by an older Perl might require
1918 conversion before being readable by a newer Perl.
1919 .IP "Code point 0x%X is not Unicode, may not be portable" 4
1920 .IX Item "Code point 0x%X is not Unicode, may not be portable"
1921 (S non_unicode) You had a code point above the Unicode maximum
1922 of U+10FFFF.
1923 .Sp
1924 Perl allows strings to contain a superset of Unicode code points, but
1925 these may not be accepted by other languages/systems. Further, even if
1926 these languages/systems accept these large code points, they may have
1927 chosen a different representation for them than the UTF\-8\-like one that
1928 Perl has, which would mean files are not exchangeable between them and
1929 Perl.
1930 .Sp
1931 On EBCDIC platforms, code points above 0x3FFF_FFFF have a different
1932 representation in Perl v5.24 than before, so any file containing these
1933 that was written before that version will require conversion before
1934 being readable by a later Perl.
1935 .ie n .IP "%s: Command not found" 4
1936 .el .IP "\f(CW%s:\fR Command not found" 4
1937 .IX Item "%s: Command not found"
1938 (A) You've accidentally run your script through \fBcsh\fR or another shell
1939 instead of Perl. Check the #! line, or manually feed your script into
1940 Perl yourself. The #! line at the top of your file could look like
1941 .Sp
1942 .Vb 1
1943 \& #!/usr/bin/perl
1944 .Ve
1945 .ie n .IP "%s: command not found" 4
1946 .el .IP "\f(CW%s:\fR command not found" 4
1947 .IX Item "%s: command not found"
1948 (A) You've accidentally run your script through \fBbash\fR or another shell
1949 instead of Perl. Check the #! line, or manually feed your script into
1950 Perl yourself. The #! line at the top of your file could look like
1951 .Sp
1952 .Vb 1
1953 \& #!/usr/bin/perl
1954 .Ve
1955 .ie n .IP "%s: command not found: %s" 4
1956 .el .IP "\f(CW%s:\fR command not found: \f(CW%s\fR" 4
1957 .IX Item "%s: command not found: %s"
1958 (A) You've accidentally run your script through \fBzsh\fR or another shell
1959 instead of Perl. Check the #! line, or manually feed your script into
1960 Perl yourself. The #! line at the top of your file could look like
1961 .Sp
1962 .Vb 1
1963 \& #!/usr/bin/perl
1964 .Ve
1965 .IP "Compilation failed in require" 4
1966 .IX Item "Compilation failed in require"
1967 (F) Perl could not compile a file specified in a \f(CW\*(C`require\*(C'\fR statement.
1968 Perl uses this generic message when none of the errors that it
1969 encountered were severe enough to halt compilation immediately.
1970 .ie n .IP "\fBconnect()\fR on closed socket %s" 4
1971 .el .IP "\fBconnect()\fR on closed socket \f(CW%s\fR" 4
1972 .IX Item "connect() on closed socket %s"
1973 (W closed) You tried to do a connect on a closed socket. Did you forget
1974 to check the return value of your \fBsocket()\fR call? See
1975 "connect" in perlfunc.
1976 .IP "Constant(%s): Call to &{$^H{%s}} did not return a defined value" 4
1977 .IX Item "Constant(%s): Call to &{$^H{%s}} did not return a defined value"
1978 (F) The subroutine registered to handle constant overloading
1979 (see overload) or a custom charnames handler (see
1980 "CUSTOM TRANSLATORS" in charnames) returned an undefined value.
1981 .IP "Constant(%s): $^H{%s} is not defined" 4
1982 .IX Item "Constant(%s): $^H{%s} is not defined"
1983 (F) The parser found inconsistencies while attempting to define an
1984 overloaded constant. Perhaps you forgot to load the corresponding
1985 overload pragma?
1986 .ie n .IP "Constant is not %s reference" 4
1987 .el .IP "Constant is not \f(CW%s\fR reference" 4
1988 .IX Item "Constant is not %s reference"
1989 (F) A constant value (perhaps declared using the \f(CW\*(C`use constant\*(C'\fR pragma)
1990 is being dereferenced, but it amounts to the wrong type of reference.
1991 The message indicates the type of reference that was expected. This
1992 usually indicates a syntax error in dereferencing the constant value.
1993 See "Constant Functions" in perlsub and constant.
1994 .IP "Constants from lexical variables potentially modified elsewhere are no longer permitted" 4
1995 .IX Item "Constants from lexical variables potentially modified elsewhere are no longer permitted"
1996 (F) You wrote something like
1997 .Sp
1998 .Vb 2
1999 \& my $var;
2000 \& $sub = sub () { $var };
2001 .Ve
2002 .Sp
2003 but \f(CW$var\fR is referenced elsewhere and could be modified after the \f(CW\*(C`sub\*(C'\fR
2004 expression is evaluated. Either it is explicitly modified elsewhere
2005 (\f(CW\*(C`$var = 3\*(C'\fR) or it is passed to a subroutine or to an operator like
2006 \&\f(CW\*(C`printf\*(C'\fR or \f(CW\*(C`map\*(C'\fR, which may or may not modify the variable.
2007 .Sp
2008 Traditionally, Perl has captured the value of the variable at that
2009 point and turned the subroutine into a constant eligible for inlining.
2010 In those cases where the variable can be modified elsewhere, this
2011 breaks the behavior of closures, in which the subroutine captures
2012 the variable itself, rather than its value, so future changes to the
2013 variable are reflected in the subroutine's return value.
2014 .Sp
2015 This usage was deprecated, and as of Perl 5.32 is no longer allowed,
2016 making it possible to change the behavior in the future.
2017 .Sp
2018 If you intended for the subroutine to be eligible for inlining, then
2019 make sure the variable is not referenced elsewhere, possibly by
2020 copying it:
2021 .Sp
2022 .Vb 2
2023 \& my $var2 = $var;
2024 \& $sub = sub () { $var2 };
2025 .Ve
2026 .Sp
2027 If you do want this subroutine to be a closure that reflects future
2028 changes to the variable that it closes over, add an explicit \f(CW\*(C`return\*(C'\fR:
2029 .Sp
2030 .Vb 2
2031 \& my $var;
2032 \& $sub = sub () { return $var };
2033 .Ve
2034 .ie n .IP "Constant subroutine %s redefined" 4
2035 .el .IP "Constant subroutine \f(CW%s\fR redefined" 4
2036 .IX Item "Constant subroutine %s redefined"
2037 (W redefine)(S) You redefined a subroutine which had previously
2038 been eligible for inlining. See "Constant Functions" in perlsub
2039 for commentary and workarounds.
2040 .ie n .IP "Constant subroutine %s undefined" 4
2041 .el .IP "Constant subroutine \f(CW%s\fR undefined" 4
2042 .IX Item "Constant subroutine %s undefined"
2043 (W misc) You undefined a subroutine which had previously been eligible
2044 for inlining. See "Constant Functions" in perlsub for commentary and
2045 workarounds.
2046 .IP "Constant(%s) unknown" 4
2047 .IX Item "Constant(%s) unknown"
2048 (F) The parser found inconsistencies either while attempting
2049 to define an overloaded constant, or when trying to find the
2050 character name specified in the \f(CW\*(C`\eN{...}\*(C'\fR escape. Perhaps you
2051 forgot to load the corresponding overload pragma?
2052 .IP ":const is not permitted on named subroutines" 4
2053 .IX Item ":const is not permitted on named subroutines"
2054 (F) The "const" attribute causes an anonymous subroutine to be run and
2055 its value captured at the time that it is cloned. Named subroutines are
2056 not cloned like this, so the attribute does not make sense on them.
2057 .IP "Copy method did not return a reference" 4
2058 .IX Item "Copy method did not return a reference"
2059 (F) The method which overloads "=" is buggy. See
2060 "Copy Constructor" in overload.
2061 .IP "&CORE::%s cannot be called directly" 4
2062 .IX Item "&CORE::%s cannot be called directly"
2063 (F) You tried to call a subroutine in the \f(CW\*(C`CORE::\*(C'\fR namespace
2064 with \f(CW&foo\fR syntax or through a reference. Some subroutines
2065 in this package cannot yet be called that way, but must be
2066 called as barewords. Something like this will work:
2067 .Sp
2068 .Vb 2
2069 \& BEGIN { *shove = \e&CORE::push; }
2070 \& shove @array, 1,2,3; # pushes on to @array
2071 .Ve
2072 .IP "CORE::%s is not a keyword" 4
2073 .IX Item "CORE::%s is not a keyword"
2074 (F) The CORE:: namespace is reserved for Perl keywords.
2075 .ie n .IP "Corrupted regexp opcode %d > %d" 4
2076 .el .IP "Corrupted regexp opcode \f(CW%d\fR > \f(CW%d\fR" 4
2077 .IX Item "Corrupted regexp opcode %d > %d"
2078 (P) This is either an error in Perl, or, if you're using
2079 one, your custom regular expression engine. If not the
2080 latter, report the problem to <https://github.com/Perl/perl5/issues/new/choose>.
2081 .IP "corrupted regexp pointers" 4
2082 .IX Item "corrupted regexp pointers"
2083 (P) The regular expression engine got confused by what the regular
2084 expression compiler gave it.
2085 .IP "corrupted regexp program" 4
2086 .IX Item "corrupted regexp program"
2087 (P) The regular expression engine got passed a regexp program without a
2088 valid magic number.
2089 .IP "Corrupt malloc ptr 0x%x at 0x%x" 4
2090 .IX Item "Corrupt malloc ptr 0x%x at 0x%x"
2091 (P) The malloc package that comes with Perl had an internal failure.
2092 .IP "Count after length/code in unpack" 4
2093 .IX Item "Count after length/code in unpack"
2094 (F) You had an unpack template indicating a counted-length string, but
2095 you have also specified an explicit size for the string. See
2096 "pack" in perlfunc.
2097 .IP "Declaring references is experimental" 4
2098 .IX Item "Declaring references is experimental"
2099 (S experimental::declared_refs) This warning is emitted if you use
2100 a reference constructor on the right-hand side of \f(CW\*(C`my\*(C'\fR, \f(CW\*(C`state\*(C'\fR, \f(CW\*(C`our\*(C'\fR, or
2101 \&\f(CW\*(C`local\*(C'\fR. Simply suppress the warning if you want to use the feature, but
2102 know that in doing so you are taking the risk of using an experimental
2103 feature which may change or be removed in a future Perl version:
2104 .Sp
2105 .Vb 3
2106 \& no warnings "experimental::declared_refs";
2107 \& use feature "declared_refs";
2108 \& $fooref = my \e$foo;
2109 .Ve
2110 .IP "Deep recursion on anonymous subroutine" 4
2111 .IX Item "Deep recursion on anonymous subroutine"
2112 .PD 0
2113 .IP "Deep recursion on subroutine ""%s""" 4
2114 .IX Item "Deep recursion on subroutine ""%s"""
2115 .PD
2116 (W recursion) This subroutine has called itself (directly or indirectly)
2117 100 times more than it has returned. This probably indicates an
2118 infinite recursion, unless you're writing strange benchmark programs, in
2119 which case it indicates something else.
2120 .Sp
2121 This threshold can be changed from 100, by recompiling the \fIperl\fR binary,
2122 setting the C pre-processor macro \f(CW\*(C`PERL_SUB_DEPTH_WARN\*(C'\fR to the desired value.
2123 .IP "(?(DEFINE)....) does not allow branches in regex; marked by <\-\-\ HERE in m/%s/" 4
2124 .IX Item "(?(DEFINE)....) does not allow branches in regex; marked by <--\ HERE in m/%s/"
2125 (F) You used something like \f(CW\*(C`(?(DEFINE)...|..)\*(C'\fR which is illegal. The
2126 most likely cause of this error is that you left out a parenthesis inside
2127 of the \f(CW\*(C`....\*(C'\fR part.
2128 .Sp
2129 The <\-\-\ HERE shows whereabouts in the regular expression the problem was
2130 discovered.
2131 .ie n .IP "%s defines neither package nor VERSION\-\-version check failed" 4
2132 .el .IP "\f(CW%s\fR defines neither package nor VERSION\-\-version check failed" 4
2133 .IX Item "%s defines neither package nor VERSION--version check failed"
2134 (F) You said something like "use Module 42" but in the Module file
2135 there are neither package declarations nor a \f(CW$VERSION\fR.
2136 .IP "delete argument is not a HASH or ARRAY element or slice" 4
2137 .IX Item "delete argument is not a HASH or ARRAY element or slice"
2138 (F) The argument to \f(CW\*(C`delete\*(C'\fR must be either a hash or array element,
2139 such as:
2140 .Sp
2141 .Vb 2
2142 \& $foo{$bar}
2143 \& $ref\->{"susie"}[12]
2144 .Ve
2145 .Sp
2146 or a hash or array slice, such as:
2147 .Sp
2148 .Vb 2
2149 \& @foo[$bar, $baz, $xyzzy]
2150 \& $ref\->[12]\->@{"susie", "queue"}
2151 .Ve
2152 .Sp
2153 or a hash key/value or array index/value slice, such as:
2154 .Sp
2155 .Vb 2
2156 \& %foo[$bar, $baz, $xyzzy]
2157 \& $ref\->[12]\->%{"susie", "queue"}
2158 .Ve
2159 .IP "Delimiter for here document is too long" 4
2160 .IX Item "Delimiter for here document is too long"
2161 (F) In a here document construct like \f(CW\*(C`<<FOO\*(C'\fR, the label \f(CW\*(C`FOO\*(C'\fR is too
2162 long for Perl to handle. You have to be seriously twisted to write code
2163 that triggers this error.
2164 .IP "DESTROY created new reference to dead object '%s'" 4
2165 .IX Item "DESTROY created new reference to dead object '%s'"
2166 (F) A \fBDESTROY()\fR method created a new reference to the object which is
2167 just being DESTROYed. Perl is confused, and prefers to abort rather
2168 than to create a dangling reference.
2169 .IP "Did not produce a valid header" 4
2170 .IX Item "Did not produce a valid header"
2171 See "500 Server error".
2172 .ie n .IP "%s did not return a true value" 4
2173 .el .IP "\f(CW%s\fR did not return a true value" 4
2174 .IX Item "%s did not return a true value"
2175 (F) A required (or used) file must return a true value to indicate that
2176 it compiled correctly and ran its initialization code correctly. It's
2177 traditional to end such a file with a "1;", though any true value would
2178 do. See "require" in perlfunc.
2179 .IP "(Did you mean &%s instead?)" 4
2180 .IX Item "(Did you mean &%s instead?)"
2181 (W misc) You probably referred to an imported subroutine &FOO as \f(CW$FOO\fR or
2182 some such.
2183 .IP "(Did you mean ""local"" instead of ""our""?)" 4
2184 .IX Item "(Did you mean ""local"" instead of ""our""?)"
2185 (W shadow) Remember that "our" does not localize the declared global
2186 variable. You have declared it again in the same lexical scope, which
2187 seems superfluous.
2188 .IP "(Did you mean $ or @ instead of %?)" 4
2189 .IX Item "(Did you mean $ or @ instead of %?)"
2190 (W) You probably said \f(CW%hash\fR{$key} when you meant \f(CW$hash\fR{$key} or
2191 \&\f(CW@hash\fR{@keys}. On the other hand, maybe you just meant \f(CW%hash\fR and got
2192 carried away.
2193 .IP Died 4
2194 .IX Item "Died"
2195 (F) You passed \fBdie()\fR an empty string (the equivalent of \f(CW\*(C`die ""\*(C'\fR) or
2196 you called it with no args and \f(CW$@\fR was empty.
2197 .IP "Document contains no data" 4
2198 .IX Item "Document contains no data"
2199 See "500 Server error".
2200 .ie n .IP "%s does not define %s::VERSION\-\-version check failed" 4
2201 .el .IP "\f(CW%s\fR does not define \f(CW%s::VERSION\fR\-\-version check failed" 4
2202 .IX Item "%s does not define %s::VERSION--version check failed"
2203 (F) You said something like "use Module 42" but the Module did not
2204 define a \f(CW$VERSION\fR.
2205 .ie n .IP "'/' does not take a repeat count in %s" 4
2206 .el .IP "'/' does not take a repeat count in \f(CW%s\fR" 4
2207 .IX Item "'/' does not take a repeat count in %s"
2208 (F) You cannot put a repeat count of any kind right after the '/' code.
2209 See "pack" in perlfunc.
2210 .ie n .IP "do ""%s"" failed, '.' is no longer in @INC; did you mean do ""./%s""?" 4
2211 .el .IP "do ""%s"" failed, '.' is no longer in \f(CW@INC\fR; did you mean do ""./%s""?" 4
2212 .IX Item "do ""%s"" failed, '.' is no longer in @INC; did you mean do ""./%s""?"
2213 (D deprecated::dot_in_inc) Previously \f(CW\*(C` do "somefile"; \*(C'\fR would search
2214 the current directory for the specified file. Since perl v5.26.0, \fI.\fR
2215 has been removed from \f(CW@INC\fR by default, so this is no longer true. To
2216 search the current directory (and only the current directory) you can
2217 write \f(CW\*(C` do "./somefile"; \*(C'\fR.
2218 .IP "'%s' does not appear to be an imported builtin function" 4
2219 .IX Item "'%s' does not appear to be an imported builtin function"
2220 (F) An attempt was made to remove a previously-imported lexical from
2221 builtin by using the \f(CW\*(C`unimport\*(C'\fR method (likely via \f(CW\*(C`no builtin ...\*(C'\fR
2222 syntax), but the requested function has not been imported into the current
2223 scope.
2224 .IP "Don't know how to get file name" 4
2225 .IX Item "Don't know how to get file name"
2226 (P) \f(CW\*(C`PerlIO_getname\*(C'\fR, a perl internal I/O function specific to VMS, was
2227 somehow called on another platform. This should not happen.
2228 .IP "Don't know how to handle magic of type \e%o" 4
2229 .IX Item "Don't know how to handle magic of type %o"
2230 (P) The internal handling of magical variables has been cursed.
2231 .IP "Downgrading a use VERSION declaration to below v5.11 is not permitted" 4
2232 .IX Item "Downgrading a use VERSION declaration to below v5.11 is not permitted"
2233 (F) A \f(CW\*(C`use VERSION\*(C'\fR statement that requests a version below v5.11
2234 (when the effects of \f(CW\*(C`use strict\*(C'\fR would be disabled) has been found
2235 after a previous declaration of one having a larger number (which would
2236 have enabled these effects). Because of a change to the way that
2237 \&\f(CW\*(C`use VERSION\*(C'\fR interacts with the strictness flags, this is no longer
2238 supported.
2239 .ie n .IP "(Do you need to predeclare %s?)" 4
2240 .el .IP "(Do you need to predeclare \f(CW%s\fR?)" 4
2241 .IX Item "(Do you need to predeclare %s?)"
2242 (S syntax) This is an educated guess made in conjunction with the message
2243 "%s found where operator expected". It often means a subroutine or module
2244 name is being referenced that hasn't been declared yet. This may be
2245 because of ordering problems in your file, or because of a missing
2246 "sub", "package", "require", or "use" statement. If you're referencing
2247 something that isn't defined yet, you don't actually have to define the
2248 subroutine or package before the current location. You can use an empty
2249 "sub foo;" or "package FOO;" to enter a "forward" declaration.
2250 .IP "\fBdump()\fR must be written as \fBCORE::dump()\fR as of Perl 5.30" 4
2251 .IX Item "dump() must be written as CORE::dump() as of Perl 5.30"
2252 (F) You used the obsolete \f(CWdump()\fR built-in function. That was deprecated in
2253 Perl 5.8.0. As of Perl 5.30 it must be written in fully qualified format:
2254 \&\f(CWCORE::dump()\fR.
2255 .Sp
2256 See "dump" in perlfunc.
2257 .IP "dump is not supported" 4
2258 .IX Item "dump is not supported"
2259 (F) Your machine doesn't support dump/undump.
2260 .IP "Duplicate \fBfree()\fR ignored" 4
2261 .IX Item "Duplicate free() ignored"
2262 (S malloc) An internal routine called \fBfree()\fR on something that had
2263 already been freed.
2264 .ie n .IP "Duplicate modifier '%c' after '%c' in %s" 4
2265 .el .IP "Duplicate modifier '%c' after '%c' in \f(CW%s\fR" 4
2266 .IX Item "Duplicate modifier '%c' after '%c' in %s"
2267 (W unpack) You have applied the same modifier more than once after a
2268 type in a pack template. See "pack" in perlfunc.
2269 .ie n .IP "each on anonymous %s will always start from the beginning" 4
2270 .el .IP "each on anonymous \f(CW%s\fR will always start from the beginning" 4
2271 .IX Item "each on anonymous %s will always start from the beginning"
2272 (W syntax) You called each on an anonymous hash or
2273 array. Since a new hash or array is created each time, \fBeach()\fR will
2274 restart iterating over your hash or array every time.
2275 .IP "elseif should be elsif" 4
2276 .IX Item "elseif should be elsif"
2277 (S syntax) There is no keyword "elseif" in Perl because Larry thinks
2278 it's ugly. Your code will be interpreted as an attempt to call a method
2279 named "elseif" for the class returned by the following block. This is
2280 unlikely to be what you want.
2281 .IP "Empty \e%c in regex; marked by <\-\-\ HERE in m/%s/" 4
2282 .IX Item "Empty %c in regex; marked by <--\ HERE in m/%s/"
2283 .PD 0
2284 .IP "Empty \e%c{}" 4
2285 .IX Item "Empty %c{}"
2286 .IP "Empty \e%c{} in regex; marked by <\-\-\ HERE in m/%s/" 4
2287 .IX Item "Empty %c{} in regex; marked by <--\ HERE in m/%s/"
2288 .PD
2289 (F) You used something like \f(CW\*(C`\eb{}\*(C'\fR, \f(CW\*(C`\eB{}\*(C'\fR, \f(CW\*(C`\eo{}\*(C'\fR, \f(CW\*(C`\ep\*(C'\fR, \f(CW\*(C`\eP\*(C'\fR, or
2290 \&\f(CW\*(C`\ex\*(C'\fR without specifying anything for it to operate on.
2291 .Sp
2292 Unfortunately, for backwards compatibility reasons, an empty \f(CW\*(C`\ex\*(C'\fR is
2293 legal outside \f(CW\*(C`use\ re\ \*(Aqstrict\*(Aq\*(C'\fR and expands to a NUL character.
2294 .IP "Empty (?) without any modifiers in regex; marked by <\-\- HERE in m/%s/" 4
2295 .IX Item "Empty (?) without any modifiers in regex; marked by <-- HERE in m/%s/"
2296 (W regexp) (only under \f(CW\*(C`use\ re\ \*(Aqstrict\*(Aq\*(C'\fR)
2297 \&\f(CW\*(C`(?)\*(C'\fR does nothing, so perhaps this is a typo.
2298 .IP "${^ENCODING} is no longer supported" 4
2299 .IX Item "${^ENCODING} is no longer supported"
2300 (F) The special variable \f(CW\*(C`${^ENCODING}\*(C'\fR, formerly used to implement
2301 the \f(CW\*(C`encoding\*(C'\fR pragma, is no longer supported as of Perl 5.26.0.
2302 .Sp
2303 Setting it to anything other than \f(CW\*(C`undef\*(C'\fR is a fatal error as of Perl
2304 5.28.
2305 .IP "${^HOOK}{%s} may only be a CODE reference or undef" 4
2306 .IX Item "${^HOOK}{%s} may only be a CODE reference or undef"
2307 (F) You attempted to assign something other than undef or a CODE ref to
2308 \&\f(CW\*(C`%{^HOOK}\*(C'\fR. Hooks may only be CODE refs. See "%{^HOOK}" in perlvar for
2309 details.
2310 .IP "Attempt to set unknown hook '%s' in %{^HOOK}" 4
2311 .IX Item "Attempt to set unknown hook '%s' in %{^HOOK}"
2312 (F) You attempted to assign something other than undef or a CODE ref to
2313 \&\f(CW\*(C`%{^HOOK}\*(C'\fR. Hooks may only be CODE refs. See "%{^HOOK}" in perlvar for
2314 details.
2315 .ie n .IP "entering effective %s failed" 4
2316 .el .IP "entering effective \f(CW%s\fR failed" 4
2317 .IX Item "entering effective %s failed"
2318 (F) While under the \f(CW\*(C`use filetest\*(C'\fR pragma, switching the real and
2319 effective uids or gids failed.
2320 .ie n .IP "%ENV is aliased to %s" 4
2321 .el .IP "\f(CW%ENV\fR is aliased to \f(CW%s\fR" 4
2322 .IX Item "%ENV is aliased to %s"
2323 (F) You're running under taint mode, and the \f(CW%ENV\fR variable has been
2324 aliased to another hash, so it doesn't reflect anymore the state of the
2325 program's environment. This is potentially insecure.
2326 .ie n .IP "Error converting file specification %s" 4
2327 .el .IP "Error converting file specification \f(CW%s\fR" 4
2328 .IX Item "Error converting file specification %s"
2329 (F) An error peculiar to VMS. Because Perl may have to deal with file
2330 specifications in either VMS or Unix syntax, it converts them to a
2331 single form when it must operate on them directly. Either you've passed
2332 an invalid file specification to Perl, or you've found a case the
2333 conversion routines don't handle. Drat.
2334 .ie n .IP "Error %s in expansion of %s" 4
2335 .el .IP "Error \f(CW%s\fR in expansion of \f(CW%s\fR" 4
2336 .IX Item "Error %s in expansion of %s"
2337 (F) An error was encountered in handling a user-defined property
2338 ("User-Defined Character Properties" in perlunicode). These are
2339 programmer written subroutines, hence subject to errors that may
2340 prevent them from compiling or running. The calls to these subs are
2341 \&\f(CW\*(C`eval\*(C'\fR'd, and if there is a failure, this message is raised, using the
2342 contents of \f(CW$@\fR from the failed \f(CW\*(C`eval\*(C'\fR.
2343 .Sp
2344 Another possibility is that tainted data was encountered somewhere in
2345 the chain of expanding the property. If so, the message wording will
2346 indicate that this is the problem. See "Insecure user-defined
2347 property \f(CW%s\fR".
2348 .IP "Eval-group in insecure regular expression" 4
2349 .IX Item "Eval-group in insecure regular expression"
2350 (F) Perl detected tainted data when trying to compile a regular
2351 expression that contains the \f(CW\*(C`(?{ ... })\*(C'\fR zero-width assertion, which
2352 is unsafe. See "(?{ code })" in perlre, and perlsec.
2353 .IP "Eval-group not allowed at runtime, use re 'eval' in regex m/%s/" 4
2354 .IX Item "Eval-group not allowed at runtime, use re 'eval' in regex m/%s/"
2355 (F) Perl tried to compile a regular expression containing the
2356 \&\f(CW\*(C`(?{ ... })\*(C'\fR zero-width assertion at run time, as it would when the
2357 pattern contains interpolated values. Since that is a security risk,
2358 it is not allowed. If you insist, you may still do this by using the
2359 \&\f(CW\*(C`re \*(Aqeval\*(Aq\*(C'\fR pragma or by explicitly building the pattern from an
2360 interpolated string at run time and using that in an \fBeval()\fR. See
2361 "(?{ code })" in perlre.
2362 .IP "Eval-group not allowed, use re 'eval' in regex m/%s/" 4
2363 .IX Item "Eval-group not allowed, use re 'eval' in regex m/%s/"
2364 (F) A regular expression contained the \f(CW\*(C`(?{ ... })\*(C'\fR zero-width
2365 assertion, but that construct is only allowed when the \f(CW\*(C`use re \*(Aqeval\*(Aq\*(C'\fR
2366 pragma is in effect. See "(?{ code })" in perlre.
2367 .IP "EVAL without pos change exceeded limit in regex; marked by <\-\-\ HERE in m/%s/" 4
2368 .IX Item "EVAL without pos change exceeded limit in regex; marked by <--\ HERE in m/%s/"
2369 (F) You used a pattern that nested too many EVAL calls without consuming
2370 any text. Restructure the pattern so that text is consumed.
2371 .Sp
2372 The <\-\-\ HERE shows whereabouts in the regular expression the problem was
2373 discovered.
2374 .IP "Excessively long <> operator" 4
2375 .IX Item "Excessively long <> operator"
2376 (F) The contents of a <> operator may not exceed the maximum size of a
2377 Perl identifier. If you're just trying to glob a long list of
2378 filenames, try using the \fBglob()\fR operator, or put the filenames into a
2379 variable and glob that.
2380 .IP "exec? I'm not *that* kind of operating system" 4
2381 .IX Item "exec? I'm not *that* kind of operating system"
2382 (F) The \f(CW\*(C`exec\*(C'\fR function is not implemented on some systems, e.g.
2383 Catamount. See perlport.
2384 .ie n .IP "%sExecution of %s aborted due to compilation errors." 4
2385 .el .IP "\f(CW%sExecution\fR of \f(CW%s\fR aborted due to compilation errors." 4
2386 .IX Item "%sExecution of %s aborted due to compilation errors."
2387 (F) The final summary message when a Perl compilation fails.
2388 .ie n .IP "Execution of %s aborted due to compilation errors." 4
2389 .el .IP "Execution of \f(CW%s\fR aborted due to compilation errors." 4
2390 .IX Item "Execution of %s aborted due to compilation errors."
2391 (F) The final summary message when a Perl compilation fails.
2392 .IP "exists argument is not a HASH or ARRAY element or a subroutine" 4
2393 .IX Item "exists argument is not a HASH or ARRAY element or a subroutine"
2394 (F) The argument to \f(CW\*(C`exists\*(C'\fR must be a hash or array element or a
2395 subroutine with an ampersand, such as:
2396 .Sp
2397 .Vb 3
2398 \& $foo{$bar}
2399 \& $ref\->{"susie"}[12]
2400 \& &do_something
2401 .Ve
2402 .IP "exists argument is not a subroutine name" 4
2403 .IX Item "exists argument is not a subroutine name"
2404 (F) The argument to \f(CW\*(C`exists\*(C'\fR for \f(CW\*(C`exists &sub\*(C'\fR must be a subroutine name,
2405 and not a subroutine call. \f(CW\*(C`exists &sub()\*(C'\fR will generate this error.
2406 .ie n .IP "Exiting eval via %s" 4
2407 .el .IP "Exiting eval via \f(CW%s\fR" 4
2408 .IX Item "Exiting eval via %s"
2409 (W exiting) You are exiting an eval by unconventional means, such as a
2410 goto, or a loop control statement.
2411 .ie n .IP "Exiting format via %s" 4
2412 .el .IP "Exiting format via \f(CW%s\fR" 4
2413 .IX Item "Exiting format via %s"
2414 (W exiting) You are exiting a format by unconventional means, such as a
2415 goto, or a loop control statement.
2416 .ie n .IP "Exiting pseudo-block via %s" 4
2417 .el .IP "Exiting pseudo-block via \f(CW%s\fR" 4
2418 .IX Item "Exiting pseudo-block via %s"
2419 (W exiting) You are exiting a rather special block construct (like a
2420 sort block or subroutine) by unconventional means, such as a goto, or a
2421 loop control statement. See "sort" in perlfunc.
2422 .ie n .IP "Exiting subroutine via %s" 4
2423 .el .IP "Exiting subroutine via \f(CW%s\fR" 4
2424 .IX Item "Exiting subroutine via %s"
2425 (W exiting) You are exiting a subroutine by unconventional means, such
2426 as a goto, or a loop control statement.
2427 .ie n .IP "Exiting substitution via %s" 4
2428 .el .IP "Exiting substitution via \f(CW%s\fR" 4
2429 .IX Item "Exiting substitution via %s"
2430 (W exiting) You are exiting a substitution by unconventional means, such
2431 as a return, a goto, or a loop control statement.
2432 .ie n .IP "Expected %s reference in export_lexically" 4
2433 .el .IP "Expected \f(CW%s\fR reference in export_lexically" 4
2434 .IX Item "Expected %s reference in export_lexically"
2435 (F) The type of a reference given to "export_lexically" in builtin did not
2436 match the sigil of the preceding name, or the value was not a reference at
2437 all.
2438 .IP "Expecting close bracket in regex; marked by <\-\-\ HERE in m/%s/" 4
2439 .IX Item "Expecting close bracket in regex; marked by <--\ HERE in m/%s/"
2440 (F) You wrote something like
2441 .Sp
2442 .Vb 1
2443 \& (?13
2444 .Ve
2445 .Sp
2446 to denote a capturing group of the form
2447 \&\f(CW\*(C`(?\fR\f(CIPARNO\fR\f(CW)\*(C'\fR,
2448 but omitted the \f(CW")"\fR.
2449 .IP "Expecting interpolated extended charclass in regex; marked by <\-\- HERE in m/%s/" 4
2450 .IX Item "Expecting interpolated extended charclass in regex; marked by <-- HERE in m/%s/"
2451 (F) It looked like you were attempting to interpolate an
2452 already-compiled extended character class, like so:
2453 .Sp
2454 .Vb 3
2455 \& my $thai_or_lao = qr/(?[ \ep{Thai} + \ep{Lao} ])/;
2456 \& ...
2457 \& qr/(?[ \ep{Digit} & $thai_or_lao ])/;
2458 .Ve
2459 .Sp
2460 But the marked code isn't syntactically correct to be such an
2461 interpolated class.
2462 .IP "Experimental aliasing via reference not enabled" 4
2463 .IX Item "Experimental aliasing via reference not enabled"
2464 (F) To do aliasing via references, you must first enable the feature:
2465 .Sp
2466 .Vb 3
2467 \& no warnings "experimental::refaliasing";
2468 \& use feature "refaliasing";
2469 \& \e$x = \e$y;
2470 .Ve
2471 .ie n .IP "Experimental %s on scalar is now forbidden" 4
2472 .el .IP "Experimental \f(CW%s\fR on scalar is now forbidden" 4
2473 .IX Item "Experimental %s on scalar is now forbidden"
2474 (F) An experimental feature added in Perl 5.14 allowed \f(CW\*(C`each\*(C'\fR, \f(CW\*(C`keys\*(C'\fR,
2475 \&\f(CW\*(C`push\*(C'\fR, \f(CW\*(C`pop\*(C'\fR, \f(CW\*(C`shift\*(C'\fR, \f(CW\*(C`splice\*(C'\fR, \f(CW\*(C`unshift\*(C'\fR, and \f(CW\*(C`values\*(C'\fR to be called with a
2476 scalar argument. This experiment is considered unsuccessful, and
2477 has been removed. The \f(CW\*(C`postderef\*(C'\fR feature may meet your needs better.
2478 .IP "Experimental subroutine signatures not enabled" 4
2479 .IX Item "Experimental subroutine signatures not enabled"
2480 (F) To use subroutine signatures, you must first enable them:
2481 .Sp
2482 .Vb 2
2483 \& use feature "signatures";
2484 \& sub foo ($left, $right) { ... }
2485 .Ve
2486 .IP "Explicit blessing to '' (assuming package main)" 4
2487 .IX Item "Explicit blessing to '' (assuming package main)"
2488 (W misc) You are blessing a reference to a zero length string. This has
2489 the effect of blessing the reference into the package main. This is
2490 usually not what you want. Consider providing a default target package,
2491 e.g. bless($ref, \f(CW$p\fR || 'MyPackage');
2492 .IP "export_lexically can only be called at compile time" 4
2493 .IX Item "export_lexically can only be called at compile time"
2494 (F) "export_lexically" in builtin was called at runtime. Because it creates
2495 new names in the lexical scope currently being compiled, it can only be
2496 called from code inside \f(CW\*(C`BEGIN\*(C'\fR block in that scope.
2497 .ie n .IP "%s: Expression syntax" 4
2498 .el .IP "\f(CW%s:\fR Expression syntax" 4
2499 .IX Item "%s: Expression syntax"
2500 (A) You've accidentally run your script through \fBcsh\fR instead of Perl.
2501 Check the #! line, or manually feed your script into Perl yourself.
2502 .ie n .IP "%s failed\-\-call queue aborted" 4
2503 .el .IP "\f(CW%s\fR failed\-\-call queue aborted" 4
2504 .IX Item "%s failed--call queue aborted"
2505 (F) An untrapped exception was raised while executing a UNITCHECK,
2506 CHECK, INIT, or END subroutine. Processing of the remainder of the
2507 queue of such routines has been prematurely ended.
2508 .ie n .IP "Failed to close in-place work file %s: %s" 4
2509 .el .IP "Failed to close in-place work file \f(CW%s:\fR \f(CW%s\fR" 4
2510 .IX Item "Failed to close in-place work file %s: %s"
2511 (F) Closing an output file from in-place editing, as with the \f(CW\*(C`\-i\*(C'\fR
2512 command-line switch, failed.
2513 .IP "False [] range ""%s"" in regex; marked by <\-\-\ HERE in m/%s/" 4
2514 .IX Item "False [] range ""%s"" in regex; marked by <--\ HERE in m/%s/"
2515 (W regexp)(F) A character class range must start and end at a literal
2516 character, not another character class like \f(CW\*(C`\ed\*(C'\fR or \f(CW\*(C`[:alpha:]\*(C'\fR. The "\-"
2517 in your false range is interpreted as a literal "\-". In a \f(CW\*(C`(?[...])\*(C'\fR
2518 construct, this is an error, rather than a warning. Consider quoting
2519 the "\-", "\e\-". The <\-\-\ HERE shows whereabouts in the regular expression
2520 the problem was discovered. See perlre.
2521 .ie n .IP "Fatal VMS error (status=%d) at %s, line %d" 4
2522 .el .IP "Fatal VMS error (status=%d) at \f(CW%s\fR, line \f(CW%d\fR" 4
2523 .IX Item "Fatal VMS error (status=%d) at %s, line %d"
2524 (P) An error peculiar to VMS. Something untoward happened in a VMS
2525 system service or RTL routine; Perl's exit status should provide more
2526 details. The filename in "at \f(CW%s\fR" and the line number in "line \f(CW%d\fR" tell
2527 you which section of the Perl source code is distressed.
2528 .IP "fcntl is not implemented" 4
2529 .IX Item "fcntl is not implemented"
2530 (F) Your machine apparently doesn't implement \fBfcntl()\fR. What is this, a
2531 PDP\-11 or something?
2532 .IP "FETCHSIZE returned a negative value" 4
2533 .IX Item "FETCHSIZE returned a negative value"
2534 (F) A tied array claimed to have a negative number of elements, which
2535 is not possible.
2536 .IP "Field already has a parameter name, cannot add another" 4
2537 .IX Item "Field already has a parameter name, cannot add another"
2538 (F) A field may have at most one application of the \f(CW\*(C`:param\*(C'\fR attribute to
2539 assign a parameter name to it; once applied a second one is not allowed.
2540 .ie n .IP "Field attribute %s requires a value" 4
2541 .el .IP "Field attribute \f(CW%s\fR requires a value" 4
2542 .IX Item "Field attribute %s requires a value"
2543 (F) You specified an attribute for a field that would require a value to
2544 be passed in parentheses, but did not provide one. Remember that
2545 whitespace is \fBnot\fR permitted between the attribute name and its value;
2546 you must write this as
2547 .Sp
2548 .Vb 1
2549 \& field $var :attr(VALUE) ...
2550 .Ve
2551 .IP "field is experimental" 4
2552 .IX Item "field is experimental"
2553 (S experimental::class) This warning is emitted if you use the \f(CW\*(C`field\*(C'\fR
2554 keyword of \f(CW\*(C`use feature \*(Aqclass\*(Aq\*(C'\fR. This keyword is currently
2555 experimental and its behaviour may change in future releases of Perl.
2556 .ie n .IP "Field %s is not accessible outside a method" 4
2557 .el .IP "Field \f(CW%s\fR is not accessible outside a method" 4
2558 .IX Item "Field %s is not accessible outside a method"
2559 (F) An attempt was made to access a field variable of a class from code
2560 that does not appear inside the body of a \f(CW\*(C`method\*(C'\fR subroutine. This is not
2561 permitted, as only methods will have access to the fields of an instance.
2562 .ie n .IP "Field %s of ""%s"" is not accessible in a method of ""%s""" 4
2563 .el .IP "Field \f(CW%s\fR of ""%s"" is not accessible in a method of ""%s""" 4
2564 .IX Item "Field %s of ""%s"" is not accessible in a method of ""%s"""
2565 (F) An attempt was made to access a field variable of a class, from a
2566 method of another class nested inside the one that actually defined it.
2567 This is not permitted, as only methods defined by a given class are
2568 permitted to access fields of that class.
2569 .IP "Field too wide in 'u' format in pack" 4
2570 .IX Item "Field too wide in 'u' format in pack"
2571 (W pack) Each line in an uuencoded string starts with a length indicator
2572 which can't encode values above 63. So there is no point in asking for
2573 a line length bigger than that. Perl will behave as if you specified
2574 \&\f(CW\*(C`u63\*(C'\fR as the format.
2575 .ie n .IP "Filehandle %s opened only for input" 4
2576 .el .IP "Filehandle \f(CW%s\fR opened only for input" 4
2577 .IX Item "Filehandle %s opened only for input"
2578 (W io) You tried to write on a read-only filehandle. If you intended
2579 it to be a read-write filehandle, you needed to open it with "+<" or
2580 "+>" or "+>>" instead of with "<" or nothing. If you intended only to
2581 write the file, use ">" or ">>". See "open" in perlfunc.
2582 .ie n .IP "Filehandle %s opened only for output" 4
2583 .el .IP "Filehandle \f(CW%s\fR opened only for output" 4
2584 .IX Item "Filehandle %s opened only for output"
2585 (W io) You tried to read from a filehandle opened only for writing, If
2586 you intended it to be a read/write filehandle, you needed to open it
2587 with "+<" or "+>" or "+>>" instead of with ">". If you intended only to
2588 read from the file, use "<". See "open" in perlfunc. Another possibility
2589 is that you attempted to open filedescriptor 0 (also known as STDIN) for
2590 output (maybe you closed STDIN earlier?).
2591 .ie n .IP "Filehandle %s reopened as %s only for input" 4
2592 .el .IP "Filehandle \f(CW%s\fR reopened as \f(CW%s\fR only for input" 4
2593 .IX Item "Filehandle %s reopened as %s only for input"
2594 (W io) You opened for reading a filehandle that got the same filehandle id
2595 as STDOUT or STDERR. This occurred because you closed STDOUT or STDERR
2596 previously.
2597 .ie n .IP "Filehandle STDIN reopened as %s only for output" 4
2598 .el .IP "Filehandle STDIN reopened as \f(CW%s\fR only for output" 4
2599 .IX Item "Filehandle STDIN reopened as %s only for output"
2600 (W io) You opened for writing a filehandle that got the same filehandle id
2601 as STDIN. This occurred because you closed STDIN previously.
2602 .ie n .IP "Filehandle STD%s reopened as %s only for input" 4
2603 .el .IP "Filehandle STD%s reopened as \f(CW%s\fR only for input" 4
2604 .IX Item "Filehandle STD%s reopened as %s only for input"
2605 (W io) You opened for reading a filehandle that got the same filehandle id
2606 as STDOUT or STDERR. This occurred because you closed the handle previously.
2607 .ie n .IP "Final $ should be \e$ or $name" 4
2608 .el .IP "Final $ should be \e$ or \f(CW$name\fR" 4
2609 .IX Item "Final $ should be $ or $name"
2610 (F) You must now decide whether the final $ in a string was meant to be
2611 a literal dollar sign, or was meant to introduce a variable name that
2612 happens to be missing. So you have to put either the backslash or the
2613 name.
2614 .IP "defer is experimental" 4
2615 .IX Item "defer is experimental"
2616 (S experimental::defer) The \f(CW\*(C`defer\*(C'\fR block modifier is experimental. If you
2617 want to use the feature, disable the warning with
2618 \&\f(CW\*(C`no warnings \*(Aqexperimental::defer\*(Aq\*(C'\fR, but know that in doing so you are taking
2619 the risk that your code may break in a future Perl version.
2620 .ie n .IP "\fBflock()\fR on closed filehandle %s" 4
2621 .el .IP "\fBflock()\fR on closed filehandle \f(CW%s\fR" 4
2622 .IX Item "flock() on closed filehandle %s"
2623 (W closed) The filehandle you're attempting to \fBflock()\fR got itself closed
2624 some time before now. Check your control flow. \fBflock()\fR operates on
2625 filehandles. Are you attempting to call \fBflock()\fR on a dirhandle by the
2626 same name?
2627 .IP "for my (...) is experimental" 4
2628 .IX Item "for my (...) is experimental"
2629 (S experimental::for_list) This warning is emitted if you use \f(CW\*(C`for\*(C'\fR to
2630 iterate multiple values at a time. This syntax is currently experimental
2631 and its behaviour may change in future releases of Perl.
2632 .IP "Forked open '%s' not meaningful in <>" 4
2633 .IX Item "Forked open '%s' not meaningful in <>"
2634 (S inplace) You had \f(CW\*(C`|\-\*(C'\fR or \f(CW\*(C`\-|\*(C'\fR in \f(CW@ARGV\fR and tried to use \f(CW\*(C`<>\*(C'\fR to read from it.
2635 .Sp
2636 Previously this would fork and produce a confusing error message.
2637 .IP "Format not terminated" 4
2638 .IX Item "Format not terminated"
2639 (F) A format must be terminated by a line with a solitary dot. Perl got
2640 to the end of your file without finding such a line.
2641 .ie n .IP "Format %s redefined" 4
2642 .el .IP "Format \f(CW%s\fR redefined" 4
2643 .IX Item "Format %s redefined"
2644 (W redefine) You redefined a format. To suppress this warning, say
2645 .Sp
2646 .Vb 4
2647 \& {
2648 \& no warnings \*(Aqredefine\*(Aq;
2649 \& eval "format NAME =...";
2650 \& }
2651 .Ve
2652 .IP "Found = in conditional, should be ==" 4
2653 .IX Item "Found = in conditional, should be =="
2654 (W syntax) You said
2655 .Sp
2656 .Vb 1
2657 \& if ($foo = 123)
2658 .Ve
2659 .Sp
2660 when you meant
2661 .Sp
2662 .Vb 1
2663 \& if ($foo == 123)
2664 .Ve
2665 .Sp
2666 (or something like that).
2667 .ie n .IP "%s found where operator expected" 4
2668 .el .IP "\f(CW%s\fR found where operator expected" 4
2669 .IX Item "%s found where operator expected"
2670 (S syntax) The Perl lexer knows whether to expect a term or an operator.
2671 If it sees what it knows to be a term when it was expecting to see an
2672 operator, it gives you this warning. Usually it indicates that an
2673 operator or delimiter was omitted, such as a semicolon.
2674 .ie n .IP "gdbm store returned %d, errno %d, key ""%s""" 4
2675 .el .IP "gdbm store returned \f(CW%d\fR, errno \f(CW%d\fR, key ""%s""" 4
2676 .IX Item "gdbm store returned %d, errno %d, key ""%s"""
2677 (S) A warning from the GDBM_File extension that a store failed.
2678 .IP "gethostent not implemented" 4
2679 .IX Item "gethostent not implemented"
2680 (F) Your C library apparently doesn't implement \fBgethostent()\fR, probably
2681 because if it did, it'd feel morally obligated to return every hostname
2682 on the Internet.
2683 .ie n .IP "get%\fBsname()\fR on closed socket %s" 4
2684 .el .IP "get%\fBsname()\fR on closed socket \f(CW%s\fR" 4
2685 .IX Item "get%sname() on closed socket %s"
2686 (W closed) You tried to get a socket or peer socket name on a closed
2687 socket. Did you forget to check the return value of your \fBsocket()\fR call?
2688 .IP "getpwnam returned invalid UIC %#o for user ""%s""" 4
2689 .IX Item "getpwnam returned invalid UIC %#o for user ""%s"""
2690 (S) A warning peculiar to VMS. The call to \f(CW\*(C`sys$getuai\*(C'\fR underlying the
2691 \&\f(CW\*(C`getpwnam\*(C'\fR operator returned an invalid UIC.
2692 .ie n .IP "\fBgetsockopt()\fR on closed socket %s" 4
2693 .el .IP "\fBgetsockopt()\fR on closed socket \f(CW%s\fR" 4
2694 .IX Item "getsockopt() on closed socket %s"
2695 (W closed) You tried to get a socket option on a closed socket. Did you
2696 forget to check the return value of your \fBsocket()\fR call? See
2697 "getsockopt" in perlfunc.
2698 .IP "get_layers: unknown argument '%s'" 4
2699 .IX Item "get_layers: unknown argument '%s'"
2700 (F) You called \fBPerlIO::get_layers()\fR with an unknown argument. Legal
2701 arguments are provided in key/value pairs, with the keys being one
2702 of \f(CW\*(C`input\*(C'\fR, \f(CW\*(C`output\*(C'\fR or \f(CW\*(C`detail\*(C'\fR, followed by a boolean.
2703 .IP "given is deprecated" 4
2704 .IX Item "given is deprecated"
2705 (D deprecated::smartmatch) \f(CW\*(C`given\*(C'\fR depends on smartmatch, which is
2706 deprecated. It will be removed in Perl 5.42. See the explanation under
2707 "Experimental Details on given and when" in perlsyn.
2708 .ie n .IP "Global symbol ""%s"" requires explicit package name (did you forget to declare ""my %s""?)" 4
2709 .el .IP "Global symbol ""%s"" requires explicit package name (did you forget to declare ""my \f(CW%s\fR""?)" 4
2710 .IX Item "Global symbol ""%s"" requires explicit package name (did you forget to declare ""my %s""?)"
2711 (F) You've said "use strict" or "use strict vars", which indicates
2712 that all variables must either be lexically scoped (using "my" or "state"),
2713 declared beforehand using "our", or explicitly qualified to say
2714 which package the global variable is in (using "::").
2715 .IP "glob failed (%s)" 4
2716 .IX Item "glob failed (%s)"
2717 (S glob) Something went wrong with the external program(s) used
2718 for \f(CW\*(C`glob\*(C'\fR and \f(CW\*(C`<*.c>\*(C'\fR. Usually, this means that you supplied a \f(CW\*(C`glob\*(C'\fR
2719 pattern that caused the external program to fail and exit with a
2720 nonzero status. If the message indicates that the abnormal exit
2721 resulted in a coredump, this may also mean that your csh (C shell)
2722 is broken. If so, you should change all of the csh-related variables
2723 in config.sh: If you have tcsh, make the variables refer to it as
2724 if it were csh (e.g. \f(CW\*(C`full_csh=\*(Aq/usr/bin/tcsh\*(Aq\*(C'\fR); otherwise, make them
2725 all empty (except that \f(CW\*(C`d_csh\*(C'\fR should be \f(CW\*(Aqundef\*(Aq\fR) so that Perl will
2726 think csh is missing. In either case, after editing config.sh, run
2727 \&\f(CW\*(C`./Configure \-S\*(C'\fR and rebuild Perl.
2728 .IP "Glob not terminated" 4
2729 .IX Item "Glob not terminated"
2730 (F) The lexer saw a left angle bracket in a place where it was expecting
2731 a term, so it's looking for the corresponding right angle bracket, and
2732 not finding it. Chances are you left some needed parentheses out
2733 earlier in the line, and you really meant a "less than".
2734 .IP "gmtime(%f) failed" 4
2735 .IX Item "gmtime(%f) failed"
2736 (W overflow) You called \f(CW\*(C`gmtime\*(C'\fR with a number that it could not handle:
2737 too large, too small, or NaN. The returned value is \f(CW\*(C`undef\*(C'\fR.
2738 .IP "gmtime(%f) too large" 4
2739 .IX Item "gmtime(%f) too large"
2740 (W overflow) You called \f(CW\*(C`gmtime\*(C'\fR with a number that was larger than
2741 it can reliably handle and \f(CW\*(C`gmtime\*(C'\fR probably returned the wrong
2742 date. This warning is also triggered with NaN (the special
2743 not-a-number value).
2744 .IP "gmtime(%f) too small" 4
2745 .IX Item "gmtime(%f) too small"
2746 (W overflow) You called \f(CW\*(C`gmtime\*(C'\fR with a number that was smaller than
2747 it can reliably handle and \f(CW\*(C`gmtime\*(C'\fR probably returned the wrong date.
2748 .IP "Got an error from DosAllocMem" 4
2749 .IX Item "Got an error from DosAllocMem"
2750 (P) An error peculiar to OS/2. Most probably you're using an obsolete
2751 version of Perl, and this should not happen anyway.
2752 .IP "goto must have label" 4
2753 .IX Item "goto must have label"
2754 (F) Unlike with "next" or "last", you're not allowed to goto an
2755 unspecified destination. See "goto" in perlfunc.
2756 .IP "Goto undefined subroutine%s" 4
2757 .IX Item "Goto undefined subroutine%s"
2758 (F) You tried to call a subroutine with \f(CW\*(C`goto &sub\*(C'\fR syntax, but
2759 the indicated subroutine hasn't been defined, or if it was, it
2760 has since been undefined.
2761 .IP "Group name must start with a non-digit word character in regex; marked by <\-\-\ HERE in m/%s/" 4
2762 .IX Item "Group name must start with a non-digit word character in regex; marked by <--\ HERE in m/%s/"
2763 (F) Group names must follow the rules for perl identifiers, meaning
2764 they must start with a non-digit word character. A common cause of
2765 this error is using (?&0) instead of (?0). See perlre.
2766 .IP "()\-group starts with a count" 4
2767 .IX Item "()-group starts with a count"
2768 (F) A ()\-group started with a count. A count is supposed to follow
2769 something: a template character or a ()\-group. See "pack" in perlfunc.
2770 .ie n .IP "%s had compilation errors." 4
2771 .el .IP "\f(CW%s\fR had compilation errors." 4
2772 .IX Item "%s had compilation errors."
2773 (F) The final summary message when a \f(CW\*(C`perl \-c\*(C'\fR fails.
2774 .ie n .IP "Had to create %s unexpectedly" 4
2775 .el .IP "Had to create \f(CW%s\fR unexpectedly" 4
2776 .IX Item "Had to create %s unexpectedly"
2777 (S internal) A routine asked for a symbol from a symbol table that ought
2778 to have existed already, but for some reason it didn't, and had to be
2779 created on an emergency basis to prevent a core dump.
2780 .ie n .IP "%s has too many errors" 4
2781 .el .IP "\f(CW%s\fR has too many errors" 4
2782 .IX Item "%s has too many errors"
2783 (F) The parser has given up trying to parse the program after 10 errors.
2784 Further error messages would likely be uninformative.
2785 .IP "Hexadecimal float: exponent overflow" 4
2786 .IX Item "Hexadecimal float: exponent overflow"
2787 (W overflow) The hexadecimal floating point has a larger exponent
2788 than the floating point supports.
2789 .IP "Hexadecimal float: exponent underflow" 4
2790 .IX Item "Hexadecimal float: exponent underflow"
2791 (W overflow) The hexadecimal floating point has a smaller exponent
2792 than the floating point supports. With the IEEE 754 floating point,
2793 this may also mean that the subnormals (formerly known as denormals)
2794 are being used, which may or may not be an error.
2795 .IP "Hexadecimal float: internal error (%s)" 4
2796 .IX Item "Hexadecimal float: internal error (%s)"
2797 (F) Something went horribly bad in hexadecimal float handling.
2798 .IP "Hexadecimal float: mantissa overflow" 4
2799 .IX Item "Hexadecimal float: mantissa overflow"
2800 (W overflow) The hexadecimal floating point literal had more bits in
2801 the mantissa (the part between the 0x and the exponent, also known as
2802 the fraction or the significand) than the floating point supports.
2803 .IP "Hexadecimal float: precision loss" 4
2804 .IX Item "Hexadecimal float: precision loss"
2805 (W overflow) The hexadecimal floating point had internally more
2806 digits than could be output. This can be caused by unsupported
2807 long double formats, or by 64\-bit integers not being available
2808 (needed to retrieve the digits under some configurations).
2809 .IP "Hexadecimal float: unsupported long double format" 4
2810 .IX Item "Hexadecimal float: unsupported long double format"
2811 (F) You have configured Perl to use long doubles but
2812 the internals of the long double format are unknown;
2813 therefore the hexadecimal float output is impossible.
2814 .IP "Hexadecimal number > 0xffffffff non-portable" 4
2815 .IX Item "Hexadecimal number > 0xffffffff non-portable"
2816 (W portable) The hexadecimal number you specified is larger than 2**32\-1
2817 (4294967295) and therefore non-portable between systems. See
2818 perlport for more on portability concerns.
2819 .IP "Identifier too long" 4
2820 .IX Item "Identifier too long"
2821 (F) Perl limits identifiers (names for variables, functions, etc.) to
2822 about 250 characters for simple names, and somewhat more for compound
2823 names (like \f(CW$A::B\fR). You've exceeded Perl's limits. Future versions
2824 of Perl are likely to eliminate these arbitrary limitations.
2825 .IP "Ignoring zero length \eN{} in character class in regex; marked by <\-\-\ HERE in m/%s/" 4
2826 .IX Item "Ignoring zero length N{} in character class in regex; marked by <--\ HERE in m/%s/"
2827 (W regexp) Named Unicode character escapes (\f(CW\*(C`\eN{...}\*(C'\fR) may return a
2828 zero-length sequence. When such an escape is used in a character
2829 class its behavior is not well defined. Check that the correct
2830 escape has been used, and the correct charname handler is in scope.
2831 .ie n .IP "Illegal %s digit '%c' ignored" 4
2832 .el .IP "Illegal \f(CW%s\fR digit '%c' ignored" 4
2833 .IX Item "Illegal %s digit '%c' ignored"
2834 (W digit) Here \f(CW%s\fR is one of "binary", "octal", or "hex".
2835 You may have tried to use a digit other than one that is legal for the
2836 given type, such as only 0 and 1 for binary. For octals, this is raised
2837 only if the illegal character is an '8' or '9'. For hex, 'A' \- 'F' and
2838 \&'a' \- 'f' are legal.
2839 Interpretation of the number stopped just before the offending digit or
2840 character.
2841 .IP "Illegal binary digit '%c'" 4
2842 .IX Item "Illegal binary digit '%c'"
2843 (F) You used a digit other than 0 or 1 in a binary number.
2844 .ie n .IP "Illegal character after '_' in prototype for %s : %s" 4
2845 .el .IP "Illegal character after '_' in prototype for \f(CW%s\fR : \f(CW%s\fR" 4
2846 .IX Item "Illegal character after '_' in prototype for %s : %s"
2847 (W illegalproto) An illegal character was found in a prototype
2848 declaration. The '_' in a prototype must be followed by a ';',
2849 indicating the rest of the parameters are optional, or one of '@'
2850 or '%', since those two will accept 0 or more final parameters.
2851 .IP "Illegal character \e%o (carriage return)" 4
2852 .IX Item "Illegal character %o (carriage return)"
2853 (F) Perl normally treats carriage returns in the program text as
2854 it would any other whitespace, which means you should never see
2855 this error when Perl was built using standard options. For some
2856 reason, your version of Perl appears to have been built without
2857 this support. Talk to your Perl administrator.
2858 .IP "Illegal character following sigil in a subroutine signature" 4
2859 .IX Item "Illegal character following sigil in a subroutine signature"
2860 (F) A parameter in a subroutine signature contained an unexpected character
2861 following the \f(CW\*(C`$\*(C'\fR, \f(CW\*(C`@\*(C'\fR or \f(CW\*(C`%\*(C'\fR sigil character. Normally the sigil
2862 should be followed by the variable name or \f(CW\*(C`=\*(C'\fR etc. Perhaps you are
2863 trying use a prototype while in the scope of \f(CW\*(C`use feature \*(Aqsignatures\*(Aq\*(C'\fR?
2864 For example:
2865 .Sp
2866 .Vb 1
2867 \& sub foo ($$) {} # legal \- a prototype
2868 \&
2869 \& use feature \*(Aqsignatures;
2870 \& sub foo ($$) {} # illegal \- was expecting a signature
2871 \& sub foo ($x, $y)
2872 \& :prototype($$) {} # legal
2873 .Ve
2874 .ie n .IP "Illegal character in prototype for %s : %s" 4
2875 .el .IP "Illegal character in prototype for \f(CW%s\fR : \f(CW%s\fR" 4
2876 .IX Item "Illegal character in prototype for %s : %s"
2877 (W illegalproto) An illegal character was found in a prototype declaration.
2878 Legal characters in prototypes are $, @, %, *, ;, [, ], &, \e, and +.
2879 Perhaps you were trying to write a subroutine signature but didn't enable
2880 that feature first (\f(CW\*(C`use feature \*(Aqsignatures\*(Aq\*(C'\fR), so your signature was
2881 instead interpreted as a bad prototype.
2882 .IP "Illegal declaration of anonymous subroutine" 4
2883 .IX Item "Illegal declaration of anonymous subroutine"
2884 (F) When using the \f(CW\*(C`sub\*(C'\fR keyword to construct an anonymous subroutine,
2885 you must always specify a block of code. See perlsub.
2886 .ie n .IP "Illegal declaration of subroutine %s" 4
2887 .el .IP "Illegal declaration of subroutine \f(CW%s\fR" 4
2888 .IX Item "Illegal declaration of subroutine %s"
2889 (F) A subroutine was not declared correctly. See perlsub.
2890 .IP "Illegal division by zero" 4
2891 .IX Item "Illegal division by zero"
2892 (F) You tried to divide a number by 0. Either something was wrong in
2893 your logic, or you need to put a conditional in to guard against
2894 meaningless input.
2895 .IP "Illegal modulus zero" 4
2896 .IX Item "Illegal modulus zero"
2897 (F) You tried to divide a number by 0 to get the remainder. Most
2898 numbers don't take to this kindly.
2899 .IP "Illegal number of bits in vec" 4
2900 .IX Item "Illegal number of bits in vec"
2901 (F) The number of bits in \fBvec()\fR (the third argument) must be a power of
2902 two from 1 to 32 (or 64, if your platform supports that).
2903 .IP "Illegal octal digit '%c'" 4
2904 .IX Item "Illegal octal digit '%c'"
2905 (F) You used an 8 or 9 in an octal number.
2906 .IP "Illegal operator following parameter in a subroutine signature" 4
2907 .IX Item "Illegal operator following parameter in a subroutine signature"
2908 (F) A parameter in a subroutine signature, was followed by something
2909 other than \f(CW\*(C`=\*(C'\fR introducing a default, \f(CW\*(C`,\*(C'\fR or \f(CW\*(C`)\*(C'\fR.
2910 .Sp
2911 .Vb 5
2912 \& use feature \*(Aqsignatures\*(Aq;
2913 \& sub foo ($=1) {} # legal
2914 \& sub foo ($x = 1) {} # legal
2915 \& sub foo ($x += 1) {} # illegal
2916 \& sub foo ($x == 1) {} # illegal
2917 .Ve
2918 .IP "Illegal pattern in regex; marked by <\-\-\ HERE in m/%s/" 4
2919 .IX Item "Illegal pattern in regex; marked by <--\ HERE in m/%s/"
2920 (F) You wrote something like
2921 .Sp
2922 .Vb 1
2923 \& (?+foo)
2924 .Ve
2925 .Sp
2926 The \f(CW"+"\fR is valid only when followed by digits, indicating a
2927 capturing group. See
2928 \&\f(CW\*(C`(?\fR\f(CIPARNO\fR\f(CW)\*(C'\fR.
2929 .IP "Illegal suidscript" 4
2930 .IX Item "Illegal suidscript"
2931 (F) The script run under suidperl was somehow illegal.
2932 .IP "Illegal switch in PERL5OPT: \-%c" 4
2933 .IX Item "Illegal switch in PERL5OPT: -%c"
2934 (X) The PERL5OPT environment variable may only be used to set the
2935 following switches: \fB\-[CDIMUdmtw]\fR.
2936 .IP "Illegal user-defined property name" 4
2937 .IX Item "Illegal user-defined property name"
2938 (F) You specified a Unicode-like property name in a regular expression
2939 pattern (using \f(CW\*(C`\ep{}\*(C'\fR or \f(CW\*(C`\eP{}\*(C'\fR) that Perl knows isn't an official
2940 Unicode property, and was likely meant to be a user-defined property
2941 name, but it can't be one of those, as they must begin with either \f(CW\*(C`In\*(C'\fR
2942 or \f(CW\*(C`Is\*(C'\fR. Check the spelling. See also
2943 "Can't find Unicode property definition "%s"".
2944 .IP "Ill-formed CRTL environ value ""%s""" 4
2945 .IX Item "Ill-formed CRTL environ value ""%s"""
2946 (W internal) A warning peculiar to VMS. Perl tried to read the CRTL's
2947 internal environ array, and encountered an element without the \f(CW\*(C`=\*(C'\fR
2948 delimiter used to separate keys from values. The element is ignored.
2949 .IP "Ill-formed message in prime_env_iter: |%s|" 4
2950 .IX Item "Ill-formed message in prime_env_iter: |%s|"
2951 (W internal) A warning peculiar to VMS. Perl tried to read a logical
2952 name or CLI symbol definition when preparing to iterate over \f(CW%ENV\fR, and
2953 didn't see the expected delimiter between key and value, so the line was
2954 ignored.
2955 .ie n .IP "(in cleanup) %s" 4
2956 .el .IP "(in cleanup) \f(CW%s\fR" 4
2957 .IX Item "(in cleanup) %s"
2958 (W misc) This prefix usually indicates that a \fBDESTROY()\fR method raised
2959 the indicated exception. Since destructors are usually called by the
2960 system at arbitrary points during execution, and often a vast number of
2961 times, the warning is issued only once for any number of failures that
2962 would otherwise result in the same message being repeated.
2963 .Sp
2964 Failure of user callbacks dispatched using the \f(CW\*(C`G_KEEPERR\*(C'\fR flag could
2965 also result in this warning. See "G_KEEPERR" in perlcall.
2966 .ie n .IP "Implicit use of @_ in %s with signatured subroutine is experimental" 4
2967 .el .IP "Implicit use of \f(CW@_\fR in \f(CW%s\fR with signatured subroutine is experimental" 4
2968 .IX Item "Implicit use of @_ in %s with signatured subroutine is experimental"
2969 (S experimental::args_array_with_signatures) An expression that implicitly
2970 involves the \f(CW@_\fR arguments array was found in a subroutine that uses a
2971 signature. This is experimental because the interaction between the
2972 arguments array and parameter handling via signatures is not guaranteed
2973 to remain stable in any future version of Perl, and such code should be
2974 avoided.
2975 .IP "Incomplete expression within '(?[ ])' in regex; marked by <\-\-\ HERE in m/%s/" 4
2976 .IX Item "Incomplete expression within '(?[ ])' in regex; marked by <--\ HERE in m/%s/"
2977 (F) There was a syntax error within the \f(CW\*(C`(?[ ])\*(C'\fR. This can happen if the
2978 expression inside the construct was completely empty, or if there are
2979 too many or few operands for the number of operators. Perl is not smart
2980 enough to give you a more precise indication as to what is wrong.
2981 .IP "Inconsistent hierarchy during C3 merge of class '%s': merging failed on parent '%s'" 4
2982 .IX Item "Inconsistent hierarchy during C3 merge of class '%s': merging failed on parent '%s'"
2983 (F) The method resolution order (MRO) of the given class is not
2984 C3\-consistent, and you have enabled the C3 MRO for this class. See the C3
2985 documentation in mro for more information.
2986 .ie n .IP "Indentation on line %d of here-doc doesn't match delimiter" 4
2987 .el .IP "Indentation on line \f(CW%d\fR of here-doc doesn't match delimiter" 4
2988 .IX Item "Indentation on line %d of here-doc doesn't match delimiter"
2989 (F) You have an indented here-document where one or more of its lines
2990 have whitespace at the beginning that does not match the closing
2991 delimiter.
2992 .Sp
2993 For example, line 2 below is wrong because it does not have at least
2994 2 spaces, but lines 1 and 3 are fine because they have at least 2:
2995 .Sp
2996 .Vb 7
2997 \& if ($something) {
2998 \& print <<~EOF;
2999 \& Line 1
3000 \& Line 2 not
3001 \& Line 3
3002 \& EOF
3003 \& }
3004 .Ve
3005 .Sp
3006 Note that tabs and spaces are compared strictly, meaning 1 tab will
3007 not match 8 spaces.
3008 .IP "Infinite recursion in regex" 4
3009 .IX Item "Infinite recursion in regex"
3010 (F) You used a pattern that references itself without consuming any input
3011 text. You should check the pattern to ensure that recursive patterns
3012 either consume text or fail.
3013 .IP "Infinite recursion in user-defined property" 4
3014 .IX Item "Infinite recursion in user-defined property"
3015 (F) A user-defined property ("User-Defined Character
3016 Properties" in perlunicode) can depend on the definitions of other user-defined
3017 properties. If the chain of dependencies leads back to this property,
3018 infinite recursion would occur, were it not for the check that raised
3019 this error.
3020 .Sp
3021 Restructure your property definitions to avoid this.
3022 .IP "Infinite recursion via empty pattern" 4
3023 .IX Item "Infinite recursion via empty pattern"
3024 (F) You tried to use the empty pattern inside of a regex code block,
3025 for instance \f(CW\*(C`/(?{ s!!! })/\*(C'\fR, which resulted in re-executing
3026 the same pattern, which is an infinite loop which is broken by
3027 throwing an exception.
3028 .IP "Initialization of state variables in list currently forbidden" 4
3029 .IX Item "Initialization of state variables in list currently forbidden"
3030 (F) \f(CW\*(C`state\*(C'\fR only permits initializing a single variable, specified
3031 without parentheses. So \f(CW\*(C`state $x = 42\*(C'\fR and \f(CW\*(C`state @x = qw(a b c)\*(C'\fR are
3032 allowed, but not \f(CW\*(C`state ($x) = 42\*(C'\fR or \f(CW\*(C`(state $x) = 42\*(C'\fR. To initialize
3033 more than one \f(CW\*(C`state\*(C'\fR variable, initialize them one at a time.
3034 .IP "%%s[%s] in scalar context better written as $%s[%s]" 4
3035 .IX Item "%%s[%s] in scalar context better written as $%s[%s]"
3036 (W syntax) In scalar context, you've used an array index/value slice
3037 (indicated by %) to select a single element of an array. Generally
3038 it's better to ask for a scalar value (indicated by $). The difference
3039 is that \f(CW$foo[&bar]\fR always behaves like a scalar, both in the value it
3040 returns and when evaluating its argument, while \f(CW%foo[&bar]\fR provides
3041 a list context to its subscript, which can do weird things if you're
3042 expecting only one subscript. When called in list context, it also
3043 returns the index (what \f(CW&bar\fR returns) in addition to the value.
3044 .IP "%%s{%s} in scalar context better written as $%s{%s}" 4
3045 .IX Item "%%s{%s} in scalar context better written as $%s{%s}"
3046 (W syntax) In scalar context, you've used a hash key/value slice
3047 (indicated by %) to select a single element of a hash. Generally it's
3048 better to ask for a scalar value (indicated by $). The difference
3049 is that \f(CW$foo{&bar}\fR always behaves like a scalar, both in the value
3050 it returns and when evaluating its argument, while \f(CW@foo{&bar}\fR and
3051 provides a list context to its subscript, which can do weird things
3052 if you're expecting only one subscript. When called in list context,
3053 it also returns the key in addition to the value.
3054 .ie n .IP "Insecure dependency in %s" 4
3055 .el .IP "Insecure dependency in \f(CW%s\fR" 4
3056 .IX Item "Insecure dependency in %s"
3057 (F) You tried to do something that the tainting mechanism didn't like.
3058 The tainting mechanism is turned on when you're running setuid or
3059 setgid, or when you specify \fB\-T\fR to turn it on explicitly. The
3060 tainting mechanism labels all data that's derived directly or indirectly
3061 from the user, who is considered to be unworthy of your trust. If any
3062 such data is used in a "dangerous" operation, you get this error. See
3063 perlsec for more information.
3064 .ie n .IP "Insecure directory in %s" 4
3065 .el .IP "Insecure directory in \f(CW%s\fR" 4
3066 .IX Item "Insecure directory in %s"
3067 (F) You can't use \fBsystem()\fR, \fBexec()\fR, or a piped open in a setuid or
3068 setgid script if \f(CW$ENV{PATH}\fR contains a directory that is writable by
3069 the world. Also, the PATH must not contain any relative directory.
3070 See perlsec.
3071 .ie n .IP "Insecure $ENV{%s} while running %s" 4
3072 .el .IP "Insecure \f(CW$ENV\fR{%s} while running \f(CW%s\fR" 4
3073 .IX Item "Insecure $ENV{%s} while running %s"
3074 (F) You can't use \fBsystem()\fR, \fBexec()\fR, or a piped open in a setuid or
3075 setgid script if any of \f(CW$ENV{PATH}\fR, \f(CW$ENV{IFS}\fR, \f(CW$ENV{CDPATH}\fR,
3076 \&\f(CW$ENV{ENV}\fR, \f(CW$ENV{BASH_ENV}\fR or \f(CW$ENV{TERM}\fR are derived from data
3077 supplied (or potentially supplied) by the user. The script must set
3078 the path to a known value, using trustworthy data. See perlsec.
3079 .ie n .IP "Insecure user-defined property %s" 4
3080 .el .IP "Insecure user-defined property \f(CW%s\fR" 4
3081 .IX Item "Insecure user-defined property %s"
3082 (F) Perl detected tainted data when trying to compile a regular
3083 expression that contains a call to a user-defined character property
3084 function, i.e. \f(CW\*(C`\ep{IsFoo}\*(C'\fR or \f(CW\*(C`\ep{InFoo}\*(C'\fR.
3085 See "User-Defined Character Properties" in perlunicode and perlsec.
3086 .ie n .IP "Integer overflow in format string for %s" 4
3087 .el .IP "Integer overflow in format string for \f(CW%s\fR" 4
3088 .IX Item "Integer overflow in format string for %s"
3089 (F) The indexes and widths specified in the format string of \f(CWprintf()\fR
3090 or \f(CWsprintf()\fR are too large. The numbers must not overflow the size of
3091 integers for your architecture.
3092 .ie n .IP "Integer overflow in %s number" 4
3093 .el .IP "Integer overflow in \f(CW%s\fR number" 4
3094 .IX Item "Integer overflow in %s number"
3095 (S overflow) The hexadecimal, octal or binary number you have specified
3096 either as a literal or as an argument to \fBhex()\fR or \fBoct()\fR is too big for
3097 your architecture, and has been converted to a floating point number.
3098 On a 32\-bit architecture the largest hexadecimal, octal or binary number
3099 representable without overflow is 0xFFFFFFFF, 037777777777, or
3100 0b11111111111111111111111111111111 respectively. Note that Perl
3101 transparently promotes all numbers to a floating point representation
3102 internally\-\-subject to loss of precision errors in subsequent
3103 operations.
3104 .IP "Integer overflow in srand" 4
3105 .IX Item "Integer overflow in srand"
3106 (S overflow) The number you have passed to srand is too big to fit
3107 in your architecture's integer representation. The number has been
3108 replaced with the largest integer supported (0xFFFFFFFF on 32\-bit
3109 architectures). This means you may be getting less randomness than
3110 you expect, because different random seeds above the maximum will
3111 return the same sequence of random numbers.
3112 .IP "Integer overflow in version" 4
3113 .IX Item "Integer overflow in version"
3114 .PD 0
3115 .ie n .IP "Integer overflow in version %d" 4
3116 .el .IP "Integer overflow in version \f(CW%d\fR" 4
3117 .IX Item "Integer overflow in version %d"
3118 .PD
3119 (W overflow) Some portion of a version initialization is too large for
3120 the size of integers for your architecture. This is not a warning
3121 because there is no rational reason for a version to try and use an
3122 element larger than typically 2**32. This is usually caused by trying
3123 to use some odd mathematical operation as a version, like 100/9.
3124 .IP "Internal disaster in regex; marked by <\-\-\ HERE in m/%s/" 4
3125 .IX Item "Internal disaster in regex; marked by <--\ HERE in m/%s/"
3126 (P) Something went badly wrong in the regular expression parser.
3127 The <\-\-\ HERE shows whereabouts in the regular expression the problem was
3128 discovered.
3129 .IP "Internal inconsistency in tracking vforks" 4
3130 .IX Item "Internal inconsistency in tracking vforks"
3131 (S) A warning peculiar to VMS. Perl keeps track of the number of times
3132 you've called \f(CW\*(C`fork\*(C'\fR and \f(CW\*(C`exec\*(C'\fR, to determine whether the current call
3133 to \f(CW\*(C`exec\*(C'\fR should affect the current script or a subprocess (see
3134 "exec LIST" in perlvms). Somehow, this count has become scrambled, so
3135 Perl is making a guess and treating this \f(CW\*(C`exec\*(C'\fR as a request to
3136 terminate the Perl script and execute the specified command.
3137 .IP "internal %<num>p might conflict with future printf extensions" 4
3138 .IX Item "internal %<num>p might conflict with future printf extensions"
3139 (S internal) Perl's internal routine that handles \f(CW\*(C`printf\*(C'\fR and \f(CW\*(C`sprintf\*(C'\fR
3140 formatting follows a slightly different set of rules when called from
3141 C or XS code. Specifically, formats consisting of digits followed
3142 by "p" (e.g., "%7p") are reserved for future use. If you see this
3143 message, then an XS module tried to call that routine with one such
3144 reserved format.
3145 .IP "Internal urp in regex; marked by <\-\-\ HERE in m/%s/" 4
3146 .IX Item "Internal urp in regex; marked by <--\ HERE in m/%s/"
3147 (P) Something went badly awry in the regular expression parser. The
3148 <\-\-\ HERE shows whereabouts in the regular expression the problem was
3149 discovered.
3150 .ie n .IP "%s (...) interpreted as function" 4
3151 .el .IP "\f(CW%s\fR (...) interpreted as function" 4
3152 .IX Item "%s (...) interpreted as function"
3153 (W syntax) You've run afoul of the rule that says that any list operator
3154 followed by parentheses turns into a function, with all the list
3155 operators arguments found inside the parentheses. See
3156 "Terms and List Operators (Leftward)" in perlop.
3157 .IP "In '(?...)', the '(' and '?' must be adjacent in regex; marked by <\-\-\ HERE in m/%s/" 4
3158 .IX Item "In '(?...)', the '(' and '?' must be adjacent in regex; marked by <--\ HERE in m/%s/"
3159 (F) The two-character sequence \f(CW"(?"\fR in this context in a regular
3160 expression pattern should be an indivisible token, with nothing
3161 intervening between the \f(CW"("\fR and the \f(CW"?"\fR, but you separated them
3162 with whitespace.
3163 .IP "In '(*...)', the '(' and '*' must be adjacent in regex; marked by <\-\-\ HERE in m/%s/" 4
3164 .IX Item "In '(*...)', the '(' and '*' must be adjacent in regex; marked by <--\ HERE in m/%s/"
3165 (F) The two-character sequence \f(CW"(*"\fR in this context in a regular
3166 expression pattern should be an indivisible token, with nothing
3167 intervening between the \f(CW"("\fR and the \f(CW"*"\fR, but you separated them.
3168 Fix the pattern and retry.
3169 .ie n .IP "Invalid %s attribute: %s" 4
3170 .el .IP "Invalid \f(CW%s\fR attribute: \f(CW%s\fR" 4
3171 .IX Item "Invalid %s attribute: %s"
3172 (F) The indicated attribute for a subroutine or variable was not recognized
3173 by Perl or by a user-supplied handler. See attributes.
3174 .ie n .IP "Invalid %s attributes: %s" 4
3175 .el .IP "Invalid \f(CW%s\fR attributes: \f(CW%s\fR" 4
3176 .IX Item "Invalid %s attributes: %s"
3177 (F) The indicated attributes for a subroutine or variable were not
3178 recognized by Perl or by a user-supplied handler. See attributes.
3179 .IP "Invalid character in charnames alias definition; marked by <\-\-\ HERE in '%s" 4
3180 .IX Item "Invalid character in charnames alias definition; marked by <--\ HERE in '%s"
3181 (F) You tried to create a custom alias for a character name, with
3182 the \f(CW\*(C`:alias\*(C'\fR option to \f(CW\*(C`use charnames\*(C'\fR and the specified character in
3183 the indicated name isn't valid. See "CUSTOM ALIASES" in charnames.
3184 .ie n .IP "Invalid \e0 character in %s for %s: %s\e0%s" 4
3185 .el .IP "Invalid \e0 character in \f(CW%s\fR for \f(CW%s:\fR \f(CW%s\fR\e0%s" 4
3186 .IX Item "Invalid 0 character in %s for %s: %s0%s"
3187 (W syscalls) Embedded \e0 characters in pathnames or other system call
3188 arguments produce a warning as of 5.20. The parts after the \e0 were
3189 formerly ignored by system calls.
3190 .IP "Invalid character in \eN{...}; marked by <\-\-\ HERE in \eN{%s}" 4
3191 .IX Item "Invalid character in N{...}; marked by <--\ HERE in N{%s}"
3192 (F) Only certain characters are valid for character names. The
3193 indicated one isn't. See "CUSTOM ALIASES" in charnames.
3194 .ie n .IP "Invalid conversion in %s: ""%s""" 4
3195 .el .IP "Invalid conversion in \f(CW%s:\fR ""%s""" 4
3196 .IX Item "Invalid conversion in %s: ""%s"""
3197 (W printf) Perl does not understand the given format conversion. See
3198 "sprintf" in perlfunc.
3199 .IP "Invalid escape in the specified encoding in regex; marked by <\-\-\ HERE in m/%s/" 4
3200 .IX Item "Invalid escape in the specified encoding in regex; marked by <--\ HERE in m/%s/"
3201 (W regexp)(F) The numeric escape (for example \f(CW\*(C`\exHH\*(C'\fR) of value < 256
3202 didn't correspond to a single character through the conversion
3203 from the encoding specified by the encoding pragma.
3204 The escape was replaced with REPLACEMENT CHARACTER (U+FFFD)
3205 instead, except within \f(CW\*(C`(?[\ \ \ ])\*(C'\fR, where it is a fatal error.
3206 The <\-\-\ HERE shows whereabouts in the regular expression the
3207 escape was discovered.
3208 .IP "Invalid hexadecimal number in \eN{U+...}" 4
3209 .IX Item "Invalid hexadecimal number in N{U+...}"
3210 .PD 0
3211 .IP "Invalid hexadecimal number in \eN{U+...} in regex; marked by <\-\-\ HERE in m/%s/" 4
3212 .IX Item "Invalid hexadecimal number in N{U+...} in regex; marked by <--\ HERE in m/%s/"
3213 .PD
3214 (F) The character constant represented by \f(CW\*(C`...\*(C'\fR is not a valid hexadecimal
3215 number. Either it is empty, or you tried to use a character other than
3216 0 \- 9 or A \- F, a \- f in a hexadecimal number.
3217 .ie n .IP "Invalid module name %s with \-%c option: contains single ':'" 4
3218 .el .IP "Invalid module name \f(CW%s\fR with \-%c option: contains single ':'" 4
3219 .IX Item "Invalid module name %s with -%c option: contains single ':'"
3220 (F) The module argument to perl's \fB\-m\fR and \fB\-M\fR command-line options
3221 cannot contain single colons in the module name, but only in the
3222 arguments after "=". In other words, \fB\-MFoo::Bar=:baz\fR is ok, but
3223 \&\fB\-MFoo:Bar=baz\fR is not.
3224 .IP "Invalid mro name: '%s'" 4
3225 .IX Item "Invalid mro name: '%s'"
3226 (F) You tried to \f(CW\*(C`mro::set_mro("classname", "foo")\*(C'\fR or \f(CW\*(C`use mro \*(Aqfoo\*(Aq\*(C'\fR,
3227 where \f(CW\*(C`foo\*(C'\fR is not a valid method resolution order (MRO). Currently,
3228 the only valid ones supported are \f(CW\*(C`dfs\*(C'\fR and \f(CW\*(C`c3\*(C'\fR, unless you have loaded
3229 a module that is a MRO plugin. See mro and perlmroapi.
3230 .IP "Invalid negative number (%s) in chr" 4
3231 .IX Item "Invalid negative number (%s) in chr"
3232 (W utf8) You passed a negative number to \f(CW\*(C`chr\*(C'\fR. Negative numbers are
3233 not valid character numbers, so it returns the Unicode replacement
3234 character (U+FFFD).
3235 .IP "Invalid number '%s' for \-C option." 4
3236 .IX Item "Invalid number '%s' for -C option."
3237 (F) You supplied a number to the \-C option that either has extra leading
3238 zeroes or overflows perl's unsigned integer representation.
3239 .IP "invalid option \-D%c, use \-D'' to see choices" 4
3240 .IX Item "invalid option -D%c, use -D'' to see choices"
3241 (S debugging) Perl was called with invalid debugger flags. Call perl
3242 with the \fB\-D\fR option with no flags to see the list of acceptable values.
3243 See also "\-Dletters" in perlrun.
3244 .IP "Invalid quantifier in {,} in regex; marked by <\-\-\ HERE in m/%s/" 4
3245 .IX Item "Invalid quantifier in {,} in regex; marked by <--\ HERE in m/%s/"
3246 (F) The pattern looks like a {min,max} quantifier, but the min or max
3247 could not be parsed as a valid number \- either it has leading zeroes,
3248 or it represents too big a number to cope with. The <\-\-\ HERE shows
3249 where in the regular expression the problem was discovered. See perlre.
3250 .IP "Invalid [] range ""%s"" in regex; marked by <\-\-\ HERE in m/%s/" 4
3251 .IX Item "Invalid [] range ""%s"" in regex; marked by <--\ HERE in m/%s/"
3252 (F) The range specified in a character class had a minimum character
3253 greater than the maximum character. One possibility is that you forgot the
3254 \&\f(CW\*(C`{}\*(C'\fR from your ending \f(CW\*(C`\ex{}\*(C'\fR \- \f(CW\*(C`\ex\*(C'\fR without the curly braces can go only
3255 up to \f(CW\*(C`ff\*(C'\fR. The <\-\-\ HERE shows whereabouts in the regular expression the
3256 problem was discovered. See perlre.
3257 .IP "Invalid range ""%s"" in transliteration operator" 4
3258 .IX Item "Invalid range ""%s"" in transliteration operator"
3259 (F) The range specified in the tr/// or y/// operator had a minimum
3260 character greater than the maximum character. See perlop.
3261 .IP "Invalid reference to group in regex; marked by <\-\-\ HERE in m/%s/" 4
3262 .IX Item "Invalid reference to group in regex; marked by <--\ HERE in m/%s/"
3263 (F) The capture group you specified can't possibly exist because the
3264 number you used is not within the legal range of possible values for
3265 this machine.
3266 .ie n .IP "Invalid separator character %s in attribute list" 4
3267 .el .IP "Invalid separator character \f(CW%s\fR in attribute list" 4
3268 .IX Item "Invalid separator character %s in attribute list"
3269 (F) Something other than a colon or whitespace was seen between the
3270 elements of an attribute list. If the previous attribute had a
3271 parenthesised parameter list, perhaps that list was terminated too soon.
3272 See attributes.
3273 .ie n .IP "Invalid separator character %s in PerlIO layer specification %s" 4
3274 .el .IP "Invalid separator character \f(CW%s\fR in PerlIO layer specification \f(CW%s\fR" 4
3275 .IX Item "Invalid separator character %s in PerlIO layer specification %s"
3276 (W layer) When pushing layers onto the Perl I/O system, something other
3277 than a colon or whitespace was seen between the elements of a layer list.
3278 If the previous attribute had a parenthesised parameter list, perhaps that
3279 list was terminated too soon.
3280 .IP "Invalid strict version format (%s)" 4
3281 .IX Item "Invalid strict version format (%s)"
3282 (F) A version number did not meet the "strict" criteria for versions.
3283 A "strict" version number is a positive decimal number (integer or
3284 decimal-fraction) without exponentiation or else a dotted-decimal
3285 v\-string with a leading 'v' character and at least three components.
3286 The parenthesized text indicates which criteria were not met.
3287 See the version module for more details on allowed version formats.
3288 .ie n .IP "Invalid type '%s' in %s" 4
3289 .el .IP "Invalid type '%s' in \f(CW%s\fR" 4
3290 .IX Item "Invalid type '%s' in %s"
3291 (F) The given character is not a valid pack or unpack type.
3292 See "pack" in perlfunc.
3293 .Sp
3294 (W) The given character is not a valid pack or unpack type but used to be
3295 silently ignored.
3296 .IP "Invalid version bundle ""%s""" 4
3297 .IX Item "Invalid version bundle ""%s"""
3298 (F) A version number that is used to specify an import bundle during a
3299 \&\f(CW\*(C`use builtin ...\*(C'\fR statement must be formatted as \f(CW\*(C`:MAJOR.MINOR\*(C'\fR with an
3300 optional third component, which is ignored. Each component must be a number
3301 of 1 to 3 digits. No other characters are permitted. The value that was
3302 specified does not conform to these rules.
3303 .IP "Invalid version format (%s)" 4
3304 .IX Item "Invalid version format (%s)"
3305 (F) A version number did not meet the "lax" criteria for versions.
3306 A "lax" version number is a positive decimal number (integer or
3307 decimal-fraction) without exponentiation or else a dotted-decimal
3308 v\-string. If the v\-string has fewer than three components, it
3309 must have a leading 'v' character. Otherwise, the leading 'v' is
3310 optional. Both decimal and dotted-decimal versions may have a
3311 trailing "alpha" component separated by an underscore character
3312 after a fractional or dotted-decimal component. The parenthesized
3313 text indicates which criteria were not met. See the version module
3314 for more details on allowed version formats.
3315 .IP "Invalid version object" 4
3316 .IX Item "Invalid version object"
3317 (F) The internal structure of the version object was invalid.
3318 Perhaps the internals were modified directly in some way or
3319 an arbitrary reference was blessed into the "version" class.
3320 .IP "In '(*VERB...)', the '(' and '*' must be adjacent in regex; marked by <\-\-\ HERE in m/%s/" 4
3321 .IX Item "In '(*VERB...)', the '(' and '*' must be adjacent in regex; marked by <--\ HERE in m/%s/"
3322 .PD 0
3323 .IP "Inverting a character class which contains a multi-character sequence is illegal in regex; marked by <\-\- HERE in m/%s/" 4
3324 .IX Item "Inverting a character class which contains a multi-character sequence is illegal in regex; marked by <-- HERE in m/%s/"
3325 .PD
3326 (F) You wrote something like
3327 .Sp
3328 .Vb 2
3329 \& qr/\eP{name=KATAKANA LETTER AINU P}/
3330 \& qr/[^\ep{name=KATAKANA LETTER AINU P}]/
3331 .Ve
3332 .Sp
3333 This name actually evaluates to a sequence of two Katakana characters,
3334 not just a single one, and it is illegal to try to take the complement
3335 of a sequence. (Mathematically it would mean any sequence of characters
3336 from 0 to infinity in length that weren't these two in a row, and that
3337 is likely not of any real use.)
3338 .Sp
3339 (F) The two-character sequence \f(CW"(*"\fR in this context in a regular
3340 expression pattern should be an indivisible token, with nothing
3341 intervening between the \f(CW"("\fR and the \f(CW"*"\fR, but you separated them.
3342 .IP "ioctl is not implemented" 4
3343 .IX Item "ioctl is not implemented"
3344 (F) Your machine apparently doesn't implement \fBioctl()\fR, which is pretty
3345 strange for a machine that supports C.
3346 .ie n .IP "\fBioctl()\fR on unopened %s" 4
3347 .el .IP "\fBioctl()\fR on unopened \f(CW%s\fR" 4
3348 .IX Item "ioctl() on unopened %s"
3349 (W unopened) You tried \fBioctl()\fR on a filehandle that was never opened.
3350 Check your control flow and number of arguments.
3351 .IP "IO layers (like '%s') unavailable" 4
3352 .IX Item "IO layers (like '%s') unavailable"
3353 (F) Your Perl has not been configured to have PerlIO, and therefore
3354 you cannot use IO layers. To have PerlIO, Perl must be configured
3355 with 'useperlio'.
3356 .IP "IO::Socket::atmark not implemented on this architecture" 4
3357 .IX Item "IO::Socket::atmark not implemented on this architecture"
3358 (F) Your machine doesn't implement the \fBsockatmark()\fR functionality,
3359 neither as a system call nor an ioctl call (SIOCATMARK).
3360 .IP "'%s' is an unknown bound type in regex; marked by <\-\-\ HERE in m/%s/" 4
3361 .IX Item "'%s' is an unknown bound type in regex; marked by <--\ HERE in m/%s/"
3362 (F) You used \f(CW\*(C`\eb{...}\*(C'\fR or \f(CW\*(C`\eB{...}\*(C'\fR and the \f(CW\*(C`...\*(C'\fR is not known to
3363 Perl. The current valid ones are given in
3364 "\eb{}, \eb, \eB{}, \eB" in perlrebackslash.
3365 .IP "%s() isn't allowed on :utf8 handles" 4
3366 .IX Item "%s() isn't allowed on :utf8 handles"
3367 (F) The \fBsysread()\fR, \fBrecv()\fR, \fBsyswrite()\fR and \fBsend()\fR operators are
3368 not allowed on handles that have the \f(CW\*(C`:utf8\*(C'\fR layer, either explicitly, or
3369 implicitly, eg., with the \f(CW:encoding(UTF\-16LE)\fR layer.
3370 .Sp
3371 Previously \fBsysread()\fR and \fBrecv()\fR currently use only the \f(CW\*(C`:utf8\*(C'\fR flag for the stream,
3372 ignoring the actual layers. Since \fBsysread()\fR and \fBrecv()\fR did no UTF\-8
3373 validation they can end up creating invalidly encoded scalars.
3374 .Sp
3375 Similarly, \fBsyswrite()\fR and \fBsend()\fR used only the \f(CW\*(C`:utf8\*(C'\fR flag, otherwise ignoring
3376 any layers. If the flag is set, both wrote the value UTF\-8 encoded, even if
3377 the layer is some different encoding, such as the example above.
3378 .Sp
3379 Ideally, all of these operators would completely ignore the \f(CW\*(C`:utf8\*(C'\fR state,
3380 working only with bytes, but this would result in silently breaking existing
3381 code.
3382 .IP """%s"" is more clearly written simply as ""%s"" in regex; marked by <\-\-\ HERE in m/%s/" 4
3383 .IX Item """%s"" is more clearly written simply as ""%s"" in regex; marked by <--\ HERE in m/%s/"
3384 (W regexp) (only under \f(CW\*(C`use\ re\ \*(Aqstrict\*(Aq\*(C'\fR or within \f(CW\*(C`(?[...])\*(C'\fR)
3385 .Sp
3386 You specified a character that has the given plainer way of writing it, and
3387 which is also portable to platforms running with different character sets.
3388 .IP "$* is no longer supported as of Perl 5.30" 4
3389 .IX Item "$* is no longer supported as of Perl 5.30"
3390 (F) The special variable \f(CW$*\fR, deprecated in older perls, was removed in
3391 5.10.0, is no longer supported and is a fatal error as of Perl 5.30. In
3392 previous versions of perl the use of \f(CW$*\fR enabled or disabled multi-line
3393 matching within a string.
3394 .Sp
3395 Instead of using \f(CW$*\fR you should use the \f(CW\*(C`/m\*(C'\fR (and maybe \f(CW\*(C`/s\*(C'\fR) regexp
3396 modifiers. You can enable \f(CW\*(C`/m\*(C'\fR for a lexical scope (even a whole file)
3397 with \f(CW\*(C`use re \*(Aq/m\*(Aq\*(C'\fR. (In older versions: when \f(CW$*\fR was set to a true value
3398 then all regular expressions behaved as if they were written using \f(CW\*(C`/m\*(C'\fR.)
3399 .Sp
3400 Use of this variable will be a fatal error in Perl 5.30.
3401 .IP "$# is no longer supported as of Perl 5.30" 4
3402 .IX Item "$# is no longer supported as of Perl 5.30"
3403 (F) The special variable \f(CW$#\fR, deprecated in older perls, was removed as of
3404 5.10.0, is no longer supported and is a fatal error as of Perl 5.30. You
3405 should use the printf/sprintf functions instead.
3406 .IP "'%s' is not a code reference" 4
3407 .IX Item "'%s' is not a code reference"
3408 (W overload) The second (fourth, sixth, ...) argument of
3409 overload::constant needs to be a code reference. Either
3410 an anonymous subroutine, or a reference to a subroutine.
3411 .IP "'%s' is not an overloadable type" 4
3412 .IX Item "'%s' is not an overloadable type"
3413 (W overload) You tried to overload a constant type the overload package is
3414 unaware of.
3415 .IP "'%s' is not recognised as a builtin function" 4
3416 .IX Item "'%s' is not recognised as a builtin function"
3417 (F) An attempt was made to \f(CW\*(C`use\*(C'\fR the builtin pragma module to create
3418 a lexical alias for an unknown function name.
3419 .IP "\-i used with no filenames on the command line, reading from STDIN" 4
3420 .IX Item "-i used with no filenames on the command line, reading from STDIN"
3421 (S inplace) The \f(CW\*(C`\-i\*(C'\fR option was passed on the command line, indicating
3422 that the script is intended to edit files in place, but no files were
3423 given. This is usually a mistake, since editing STDIN in place doesn't
3424 make sense, and can be confusing because it can make perl look like
3425 it is hanging when it is really just trying to read from STDIN. You
3426 should either pass a filename to edit, or remove \f(CW\*(C`\-i\*(C'\fR from the command
3427 line. See perlrun for more details.
3428 .IP "Junk on end of regexp in regex m/%s/" 4
3429 .IX Item "Junk on end of regexp in regex m/%s/"
3430 (P) The regular expression parser is confused.
3431 .IP "\eK not permitted in lookahead/lookbehind in regex; marked by <\-\- HERE in m/%s/" 4
3432 .IX Item "K not permitted in lookahead/lookbehind in regex; marked by <-- HERE in m/%s/"
3433 (F) Your regular expression used \f(CW\*(C`\eK\*(C'\fR in a lookahead or lookbehind
3434 assertion, which currently isn't permitted.
3435 .Sp
3436 This may change in the future, see Support \eK in
3437 lookarounds <https://github.com/Perl/perl5/issues/18134>.
3438 .ie n .IP "Label not found for ""last %s""" 4
3439 .el .IP "Label not found for ""last \f(CW%s\fR""" 4
3440 .IX Item "Label not found for ""last %s"""
3441 (F) You named a loop to break out of, but you're not currently in a loop
3442 of that name, not even if you count where you were called from. See
3443 "last" in perlfunc.
3444 .ie n .IP "Label not found for ""next %s""" 4
3445 .el .IP "Label not found for ""next \f(CW%s\fR""" 4
3446 .IX Item "Label not found for ""next %s"""
3447 (F) You named a loop to continue, but you're not currently in a loop of
3448 that name, not even if you count where you were called from. See
3449 "last" in perlfunc.
3450 .ie n .IP "Label not found for ""redo %s""" 4
3451 .el .IP "Label not found for ""redo \f(CW%s\fR""" 4
3452 .IX Item "Label not found for ""redo %s"""
3453 (F) You named a loop to restart, but you're not currently in a loop of
3454 that name, not even if you count where you were called from. See
3455 "last" in perlfunc.
3456 .ie n .IP "leaving effective %s failed" 4
3457 .el .IP "leaving effective \f(CW%s\fR failed" 4
3458 .IX Item "leaving effective %s failed"
3459 (F) While under the \f(CW\*(C`use filetest\*(C'\fR pragma, switching the real and
3460 effective uids or gids failed.
3461 .IP "length/code after end of string in unpack" 4
3462 .IX Item "length/code after end of string in unpack"
3463 (F) While unpacking, the string buffer was already used up when an unpack
3464 length/code combination tried to obtain more data. This results in
3465 an undefined value for the length. See "pack" in perlfunc.
3466 .ie n .IP "\fBlength()\fR used on %s (did you mean ""scalar(%s)""?)" 4
3467 .el .IP "\fBlength()\fR used on \f(CW%s\fR (did you mean ""scalar(%s)""?)" 4
3468 .IX Item "length() used on %s (did you mean ""scalar(%s)""?)"
3469 (W syntax) You used \fBlength()\fR on either an array or a hash when you
3470 probably wanted a count of the items.
3471 .Sp
3472 Array size can be obtained by doing:
3473 .Sp
3474 .Vb 1
3475 \& scalar(@array);
3476 .Ve
3477 .Sp
3478 The number of items in a hash can be obtained by doing:
3479 .Sp
3480 .Vb 1
3481 \& scalar(keys %hash);
3482 .Ve
3483 .IP "Lexing code attempted to stuff non\-Latin\-1 character into Latin\-1 input" 4
3484 .IX Item "Lexing code attempted to stuff non-Latin-1 character into Latin-1 input"
3485 (F) An extension is attempting to insert text into the current parse
3486 (using lex_stuff_pvn or similar), but tried to insert a character that
3487 couldn't be part of the current input. This is an inherent pitfall
3488 of the stuffing mechanism, and one of the reasons to avoid it. Where
3489 it is necessary to stuff, stuffing only plain ASCII is recommended.
3490 .IP "Lexing code internal error (%s)" 4
3491 .IX Item "Lexing code internal error (%s)"
3492 (F) Lexing code supplied by an extension violated the lexer's API in a
3493 detectable way.
3494 .ie n .IP "\fBlisten()\fR on closed socket %s" 4
3495 .el .IP "\fBlisten()\fR on closed socket \f(CW%s\fR" 4
3496 .IX Item "listen() on closed socket %s"
3497 (W closed) You tried to do a listen on a closed socket. Did you forget
3498 to check the return value of your \fBsocket()\fR call? See
3499 "listen" in perlfunc.
3500 .IP "List form of piped open not implemented" 4
3501 .IX Item "List form of piped open not implemented"
3502 (F) On some platforms, notably Windows, the three-or-more-arguments
3503 form of \f(CW\*(C`open\*(C'\fR does not support pipes, such as \f(CW\*(C`open($pipe, \*(Aq|\-\*(Aq, @args)\*(C'\fR.
3504 Use the two-argument \f(CW\*(C`open($pipe, \*(Aq|prog arg1 arg2...\*(Aq)\*(C'\fR form instead.
3505 .IP "Literal vertical space in [] is illegal except under /x in regex; marked by <\-\-\ HERE in m/%s/" 4
3506 .IX Item "Literal vertical space in [] is illegal except under /x in regex; marked by <--\ HERE in m/%s/"
3507 (F) (only under \f(CW\*(C`use\ re\ \*(Aqstrict\*(Aq\*(C'\fR or within \f(CW\*(C`(?[...])\*(C'\fR)
3508 .Sp
3509 Likely you forgot the \f(CW\*(C`/x\*(C'\fR modifier or there was a typo in the pattern.
3510 For example, did you really mean to match a form-feed? If so, all the
3511 ASCII vertical space control characters are representable by escape
3512 sequences which won't present such a jarring appearance as your pattern
3513 does when displayed.
3514 .Sp
3515 .Vb 4
3516 \& \er carriage return
3517 \& \ef form feed
3518 \& \en line feed
3519 \& \ecK vertical tab
3520 .Ve
3521 .ie n .IP "%s: loadable library and perl binaries are mismatched (got %s handshake key %p, needed %p)" 4
3522 .el .IP "\f(CW%s:\fR loadable library and perl binaries are mismatched (got \f(CW%s\fR handshake key \f(CW%p\fR, needed \f(CW%p\fR)" 4
3523 .IX Item "%s: loadable library and perl binaries are mismatched (got %s handshake key %p, needed %p)"
3524 (P) A dynamic loading library \f(CW\*(C`.so\*(C'\fR or \f(CW\*(C`.dll\*(C'\fR was being loaded into the
3525 process that was built against a different build of perl than the
3526 said library was compiled against. Reinstalling the XS module will
3527 likely fix this error.
3528 .ie n .IP "Locale '%s' contains (at least) the following characters which have unexpected meanings: %s The Perl program will use the expected meanings" 4
3529 .el .IP "Locale '%s' contains (at least) the following characters which have unexpected meanings: \f(CW%s\fR The Perl program will use the expected meanings" 4
3530 .IX Item "Locale '%s' contains (at least) the following characters which have unexpected meanings: %s The Perl program will use the expected meanings"
3531 (W locale) You are using the named UTF\-8 locale. UTF\-8 locales are
3532 expected to have very particular behavior, which most do. This message
3533 arises when perl found some departures from the expectations, and is
3534 notifying you that the expected behavior overrides these differences.
3535 In some cases the differences are caused by the locale definition being
3536 defective, but the most common causes of this warning are when there are
3537 ambiguities and conflicts in following the Standard, and the locale has
3538 chosen an approach that differs from Perl's.
3539 .Sp
3540 One of these is because that, contrary to the claims, Unicode is not
3541 completely locale insensitive. Turkish and some related languages
3542 have two types of \f(CW"I"\fR characters. One is dotted in both upper\- and
3543 lowercase, and the other is dotless in both cases. Unicode allows a
3544 locale to use either the Turkish rules, or the rules used in all other
3545 instances, where there is only one type of \f(CW"I"\fR, which is dotless in
3546 the uppercase, and dotted in the lower. The perl core does not (yet)
3547 handle the Turkish case, and this message warns you of that. Instead,
3548 the Unicode::Casing module allows you to mostly implement the Turkish
3549 casing rules.
3550 .Sp
3551 The other common cause is for the characters
3552 .Sp
3553 .Vb 1
3554 \& $ + < = > ^ \` | ~
3555 .Ve
3556 .Sp
3557 These are problematic. The C standard says that these should be
3558 considered punctuation in the C locale (and the POSIX standard defers to
3559 the C standard), and Unicode is generally considered a superset of
3560 the C locale. But Unicode has added an extra category, "Symbol", and
3561 classifies these particular characters as being symbols. Most UTF\-8
3562 locales have them treated as punctuation, so that \fBispunct\fR\|(3) returns
3563 non-zero for them. But a few locales have it return 0. Perl takes
3564 the first approach, not using \f(CWispunct()\fR at all (see Note [5] in
3565 perlrecharclass), and this message is raised to notify you that you
3566 are getting Perl's approach, not the locale's.
3567 .IP "Locale '%s' is unsupported, and may crash the interpreter" 4
3568 .IX Item "Locale '%s' is unsupported, and may crash the interpreter"
3569 (S locale) The named locale is not supported by Perl, and using it leads
3570 to undefined behavior, including potentially crashing the computer.
3571 .Sp
3572 Currently the only locales that generate this severe warning are
3573 non\-UTF\-8 ones which have characters that require more than one byte to
3574 represent (common in older East Asian language locales). See
3575 perllocale.
3576 .IP "Locale '%s' may not work well.%s" 4
3577 .IX Item "Locale '%s' may not work well.%s"
3578 (W locale) You are using the named locale, which is a non\-UTF\-8 one, and
3579 which perl has determined is not fully compatible with what it can
3580 handle. The second \f(CW%s\fR gives a reason.
3581 .Sp
3582 By far the most common reason is that the locale has characters in it
3583 that are represented by more than one byte. The only such locales that
3584 Perl can handle are the UTF\-8 locales. Most likely the specified locale
3585 is a non\-UTF\-8 one for an East Asian language such as Chinese or
3586 Japanese. If the locale is a superset of ASCII, the ASCII portion of it
3587 may work in Perl.
3588 .Sp
3589 Some essentially obsolete locales that aren't supersets of ASCII, mainly
3590 those in ISO 646 or other 7\-bit locales, such as ASMO 449, can also have
3591 problems, depending on what portions of the ASCII character set get
3592 changed by the locale and are also used by the program.
3593 The warning message lists the determinable conflicting characters.
3594 .Sp
3595 Note that not all incompatibilities are found.
3596 .Sp
3597 If this happens to you, there's not much you can do except switch to use a
3598 different locale or use Encode to translate from the locale into
3599 UTF\-8; if that's impracticable, you have been warned that some things
3600 may break.
3601 .Sp
3602 This message is output once each time a bad locale is switched into
3603 within the scope of \f(CW\*(C`use\ locale\*(C'\fR, or on the first possibly-affected
3604 operation if the \f(CW\*(C`use\ locale\*(C'\fR inherits a bad one. It is not raised
3605 for any operations from the POSIX module.
3606 .IP "localtime(%f) failed" 4
3607 .IX Item "localtime(%f) failed"
3608 (W overflow) You called \f(CW\*(C`localtime\*(C'\fR with a number that it could not handle:
3609 too large, too small, or NaN. The returned value is \f(CW\*(C`undef\*(C'\fR.
3610 .IP "localtime(%f) too large" 4
3611 .IX Item "localtime(%f) too large"
3612 (W overflow) You called \f(CW\*(C`localtime\*(C'\fR with a number that was larger
3613 than it can reliably handle and \f(CW\*(C`localtime\*(C'\fR probably returned the
3614 wrong date. This warning is also triggered with NaN (the special
3615 not-a-number value).
3616 .IP "localtime(%f) too small" 4
3617 .IX Item "localtime(%f) too small"
3618 (W overflow) You called \f(CW\*(C`localtime\*(C'\fR with a number that was smaller
3619 than it can reliably handle and \f(CW\*(C`localtime\*(C'\fR probably returned the
3620 wrong date.
3621 .ie n .IP "Lookbehind longer than %d not implemented in regex m/%s/" 4
3622 .el .IP "Lookbehind longer than \f(CW%d\fR not implemented in regex m/%s/" 4
3623 .IX Item "Lookbehind longer than %d not implemented in regex m/%s/"
3624 (F) There is currently a limit on the length of string which lookbehind can
3625 handle. This restriction may be eased in a future release.
3626 .ie n .IP "Lost precision when %s %f by 1" 4
3627 .el .IP "Lost precision when \f(CW%s\fR \f(CW%f\fR by 1" 4
3628 .IX Item "Lost precision when %s %f by 1"
3629 (W imprecision) You attempted to increment or decrement a value by one,
3630 but the result is too large for the underlying floating point
3631 representation to store accurately. Hence, the target of \f(CW\*(C`++\*(C'\fR or \f(CW\*(C`\-\-\*(C'\fR
3632 is increased or decreased by quite different value than one, such as
3633 zero (\fIi.e.\fR the target is unchanged) or two, due to rounding.
3634 Perl issues this
3635 warning because it has already switched from integers to floating point
3636 when values are too large for integers, and now even floating point is
3637 insufficient. You may wish to switch to using Math::BigInt explicitly.
3638 .IP "\fBlstat()\fR on filehandle%s" 4
3639 .IX Item "lstat() on filehandle%s"
3640 (W io) You tried to do an lstat on a filehandle. What did you mean
3641 by that? \fBlstat()\fR makes sense only on filenames. (Perl did a \fBfstat()\fR
3642 instead on the filehandle.)
3643 .ie n .IP "lvalue attribute %s already-defined subroutine" 4
3644 .el .IP "lvalue attribute \f(CW%s\fR already-defined subroutine" 4
3645 .IX Item "lvalue attribute %s already-defined subroutine"
3646 (W misc) Although attributes.pm allows this, turning the lvalue
3647 attribute on or off on a Perl subroutine that is already defined
3648 does not always work properly. It may or may not do what you
3649 want, depending on what code is inside the subroutine, with exact
3650 details subject to change between Perl versions. Only do this
3651 if you really know what you are doing.
3652 .IP "lvalue attribute ignored after the subroutine has been defined" 4
3653 .IX Item "lvalue attribute ignored after the subroutine has been defined"
3654 (W misc) Using the \f(CW\*(C`:lvalue\*(C'\fR declarative syntax to make a Perl
3655 subroutine an lvalue subroutine after it has been defined is
3656 not permitted. To make the subroutine an lvalue subroutine,
3657 add the lvalue attribute to the definition, or put the \f(CW\*(C`sub
3658 foo :lvalue;\*(C'\fR declaration before the definition.
3659 .Sp
3660 See also attributes.pm.
3661 .IP "Magical list constants are not supported" 4
3662 .IX Item "Magical list constants are not supported"
3663 (F) You assigned a magical array to a stash element, and then tried
3664 to use the subroutine from the same slot. You are asking Perl to do
3665 something it cannot do, details subject to change between Perl versions.
3666 .IP "Malformed integer in [] in pack" 4
3667 .IX Item "Malformed integer in [] in pack"
3668 (F) Between the brackets enclosing a numeric repeat count only digits
3669 are permitted. See "pack" in perlfunc.
3670 .IP "Malformed integer in [] in unpack" 4
3671 .IX Item "Malformed integer in [] in unpack"
3672 (F) Between the brackets enclosing a numeric repeat count only digits
3673 are permitted. See "pack" in perlfunc.
3674 .IP "Malformed PERLLIB_PREFIX" 4
3675 .IX Item "Malformed PERLLIB_PREFIX"
3676 (F) An error peculiar to OS/2. PERLLIB_PREFIX should be of the form
3677 .Sp
3678 .Vb 1
3679 \& prefix1;prefix2
3680 .Ve
3681 .Sp
3682 or
3683 prefix1 prefix2
3684 .Sp
3685 with nonempty prefix1 and prefix2. If \f(CW\*(C`prefix1\*(C'\fR is indeed a prefix of
3686 a builtin library search path, prefix2 is substituted. The error may
3687 appear if components are not found, or are too long. See
3688 "PERLLIB_PREFIX" in perlos2.
3689 .ie n .IP "Malformed prototype for %s: %s" 4
3690 .el .IP "Malformed prototype for \f(CW%s:\fR \f(CW%s\fR" 4
3691 .IX Item "Malformed prototype for %s: %s"
3692 (F) You tried to use a function with a malformed prototype. The
3693 syntax of function prototypes is given a brief compile-time check for
3694 obvious errors like invalid characters. A more rigorous check is run
3695 when the function is called.
3696 Perhaps the function's author was trying to write a subroutine signature
3697 but didn't enable that feature first (\f(CW\*(C`use feature \*(Aqsignatures\*(Aq\*(C'\fR),
3698 so the signature was instead interpreted as a bad prototype.
3699 .IP "Malformed UTF\-8 character%s" 4
3700 .IX Item "Malformed UTF-8 character%s"
3701 (S utf8)(F) Perl detected a string that should be UTF\-8, but didn't
3702 comply with UTF\-8 encoding rules, or represents a code point whose
3703 ordinal integer value doesn't fit into the word size of the current
3704 platform (overflows). Details as to the exact malformation are given in
3705 the variable, \f(CW%s\fR, part of the message.
3706 .Sp
3707 One possible cause is that you set the UTF8 flag yourself for data that
3708 you thought to be in UTF\-8 but it wasn't (it was for example legacy 8\-bit
3709 data). To guard against this, you can use \f(CW\*(C`Encode::decode(\*(AqUTF\-8\*(Aq, ...)\*(C'\fR.
3710 .Sp
3711 If you use the \f(CW:encoding(UTF\-8)\fR PerlIO layer for input, invalid byte
3712 sequences are handled gracefully, but if you use \f(CW\*(C`:utf8\*(C'\fR, the flag is set
3713 without validating the data, possibly resulting in this error message.
3714 .Sp
3715 See also "Handling Malformed Data" in Encode.
3716 .IP "Malformed UTF\-8 returned by \eN{%s} immediately after '%s'" 4
3717 .IX Item "Malformed UTF-8 returned by N{%s} immediately after '%s'"
3718 (F) The charnames handler returned malformed UTF\-8.
3719 .IP "Malformed UTF\-8 string in ""%s""" 4
3720 .IX Item "Malformed UTF-8 string in ""%s"""
3721 (F) This message indicates a bug either in the Perl core or in XS
3722 code. Such code was trying to find out if a character, allegedly
3723 stored internally encoded as UTF\-8, was of a given type, such as
3724 being punctuation or a digit. But the character was not encoded
3725 in legal UTF\-8. The \f(CW%s\fR is replaced by a string that can be used
3726 by knowledgeable people to determine what the type being checked
3727 against was.
3728 .Sp
3729 Passing malformed strings was deprecated in Perl 5.18, and
3730 became fatal in Perl 5.26.
3731 .IP "Malformed UTF\-8 string in '%c' format in unpack" 4
3732 .IX Item "Malformed UTF-8 string in '%c' format in unpack"
3733 (F) You tried to unpack something that didn't comply with UTF\-8 encoding
3734 rules and perl was unable to guess how to make more progress.
3735 .IP "Malformed UTF\-8 string in pack" 4
3736 .IX Item "Malformed UTF-8 string in pack"
3737 (F) You tried to pack something that didn't comply with UTF\-8 encoding
3738 rules and perl was unable to guess how to make more progress.
3739 .IP "Malformed UTF\-8 string in unpack" 4
3740 .IX Item "Malformed UTF-8 string in unpack"
3741 (F) You tried to unpack something that didn't comply with UTF\-8 encoding
3742 rules and perl was unable to guess how to make more progress.
3743 .IP "Malformed UTF\-16 surrogate" 4
3744 .IX Item "Malformed UTF-16 surrogate"
3745 (F) Perl thought it was reading UTF\-16 encoded character data but while
3746 doing it Perl met a malformed Unicode surrogate.
3747 .IP "Mandatory parameter follows optional parameter" 4
3748 .IX Item "Mandatory parameter follows optional parameter"
3749 (F) In a subroutine signature, you wrote something like "$x = undef,
3750 \&\f(CW$y\fR", making an earlier parameter optional and a later one mandatory.
3751 Parameters are filled from left to right, so it's impossible for the
3752 caller to omit an earlier one and pass a later one. If you want to act
3753 as if the parameters are filled from right to left, declare the rightmost
3754 optional and then shuffle the parameters around in the subroutine's body.
3755 .IP "Matched non-Unicode code point 0x%X against Unicode property; may not be portable" 4
3756 .IX Item "Matched non-Unicode code point 0x%X against Unicode property; may not be portable"
3757 (S non_unicode) Perl allows strings to contain a superset of
3758 Unicode code points; each code point may be as large as what is storable
3759 in a signed integer on your system, but these may not be accepted by
3760 other languages/systems. This message occurs when you matched a string
3761 containing such a code point against a regular expression pattern, and
3762 the code point was matched against a Unicode property, \f(CW\*(C`\ep{...}\*(C'\fR or
3763 \&\f(CW\*(C`\eP{...}\*(C'\fR. Unicode properties are only defined on Unicode code points,
3764 so the result of this match is undefined by Unicode, but Perl (starting
3765 in v5.20) treats non-Unicode code points as if they were typical
3766 unassigned Unicode ones, and matched this one accordingly. Whether a
3767 given property matches these code points or not is specified in
3768 "Properties accessible through \ep{} and \eP{}" in perluniprops.
3769 .Sp
3770 This message is suppressed (unless it has been made fatal) if it is
3771 immaterial to the results of the match if the code point is Unicode or
3772 not. For example, the property \f(CW\*(C`\ep{ASCII_Hex_Digit}\*(C'\fR only can match
3773 the 22 characters \f(CW\*(C`[0\-9A\-Fa\-f]\*(C'\fR, so obviously all other code points,
3774 Unicode or not, won't match it. (And \f(CW\*(C`\eP{ASCII_Hex_Digit}\*(C'\fR will match
3775 every code point except these 22.)
3776 .Sp
3777 Getting this message indicates that the outcome of the match arguably
3778 should have been the opposite of what actually happened. If you think
3779 that is the case, you may wish to make the \f(CW\*(C`non_unicode\*(C'\fR warnings
3780 category fatal; if you agree with Perl's decision, you may wish to turn
3781 off this category.
3782 .Sp
3783 See "Beyond Unicode code points" in perlunicode for more information.
3784 .ie n .IP "%s matches null string many times in regex; marked by <\-\-\ HERE in m/%s/" 4
3785 .el .IP "\f(CW%s\fR matches null string many times in regex; marked by <\-\-\ HERE in m/%s/" 4
3786 .IX Item "%s matches null string many times in regex; marked by <--\ HERE in m/%s/"
3787 (W regexp) The pattern you've specified would be an infinite loop if the
3788 regular expression engine didn't specifically check for that. The <\-\-\ HERE
3789 shows whereabouts in the regular expression the problem was discovered.
3790 See perlre.
3791 .IP "Maximal count of pending signals (%u) exceeded" 4
3792 .IX Item "Maximal count of pending signals (%u) exceeded"
3793 (F) Perl aborted due to too high a number of signals pending. This
3794 usually indicates that your operating system tried to deliver signals
3795 too fast (with a very high priority), starving the perl process from
3796 resources it would need to reach a point where it can process signals
3797 safely. (See "Deferred Signals (Safe Signals)" in perlipc.)
3798 .IP """%s"" may clash with future reserved word" 4
3799 .IX Item """%s"" may clash with future reserved word"
3800 (W) This warning may be due to running a perl5 script through a perl4
3801 interpreter, especially if the word that is being warned about is
3802 "use" or "my".
3803 .IP "'%' may not be used in pack" 4
3804 .IX Item "'%' may not be used in pack"
3805 (F) You can't pack a string by supplying a checksum, because the
3806 checksumming process loses information, and you can't go the other way.
3807 See "unpack" in perlfunc.
3808 .ie n .IP "Method for operation %s not found in package %s during blessing" 4
3809 .el .IP "Method for operation \f(CW%s\fR not found in package \f(CW%s\fR during blessing" 4
3810 .IX Item "Method for operation %s not found in package %s during blessing"
3811 (F) An attempt was made to specify an entry in an overloading table that
3812 doesn't resolve to a valid subroutine. See overload.
3813 .IP "method is experimental" 4
3814 .IX Item "method is experimental"
3815 (S experimental::class) This warning is emitted if you use the \f(CW\*(C`method\*(C'\fR
3816 keyword of \f(CW\*(C`use feature \*(Aqclass\*(Aq\*(C'\fR. This keyword is currently
3817 experimental and its behaviour may change in future releases of Perl.
3818 .ie n .IP "Method %s not permitted" 4
3819 .el .IP "Method \f(CW%s\fR not permitted" 4
3820 .IX Item "Method %s not permitted"
3821 See "500 Server error".
3822 .ie n .IP "Method %s redefined" 4
3823 .el .IP "Method \f(CW%s\fR redefined" 4
3824 .IX Item "Method %s redefined"
3825 (W redefine) You redefined a method. To suppress this warning, say
3826 .Sp
3827 .Vb 4
3828 \& {
3829 \& no warnings \*(Aqredefine\*(Aq;
3830 \& *name = method { ... };
3831 \& }
3832 .Ve
3833 .ie n .IP "Might be a runaway multi-line %s string starting on line %d" 4
3834 .el .IP "Might be a runaway multi-line \f(CW%s\fR string starting on line \f(CW%d\fR" 4
3835 .IX Item "Might be a runaway multi-line %s string starting on line %d"
3836 (S) An advisory indicating that the previous error may have been caused
3837 by a missing delimiter on a string or pattern, because it eventually
3838 ended earlier on the current line.
3839 .IP "Mismatched brackets in template" 4
3840 .IX Item "Mismatched brackets in template"
3841 (F) A pack template could not be parsed because pairs of \f(CW\*(C`[...]\*(C'\fR or
3842 \&\f(CW\*(C`(...)\*(C'\fR could not be matched up. See "pack" in perlfunc.
3843 .IP "Misplaced _ in number" 4
3844 .IX Item "Misplaced _ in number"
3845 (W syntax) An underscore (underbar) in a numeric constant did not
3846 separate two digits.
3847 .ie n .IP "Missing argument for %n in %s" 4
3848 .el .IP "Missing argument for \f(CW%n\fR in \f(CW%s\fR" 4
3849 .IX Item "Missing argument for %n in %s"
3850 (F) A \f(CW%n\fR was used in a format string with no corresponding argument for
3851 perl to write the current string length to.
3852 .ie n .IP "Missing argument in %s" 4
3853 .el .IP "Missing argument in \f(CW%s\fR" 4
3854 .IX Item "Missing argument in %s"
3855 (W missing) You called a function with fewer arguments than other
3856 arguments you supplied indicated would be needed.
3857 .Sp
3858 Currently only emitted when a printf-type format required more
3859 arguments than were supplied, but might be used in the future for
3860 other cases where we can statically determine that arguments to
3861 functions are missing, e.g. for the "pack" in perlfunc function.
3862 .IP "Missing argument to \-%c" 4
3863 .IX Item "Missing argument to -%c"
3864 (F) The argument to the indicated command line switch must follow
3865 immediately after the switch, without intervening spaces.
3866 .IP "Missing braces on \eN{}" 4
3867 .IX Item "Missing braces on N{}"
3868 .PD 0
3869 .IP "Missing braces on \eN{} in regex; marked by <\-\-\ HERE in m/%s/" 4
3870 .IX Item "Missing braces on N{} in regex; marked by <--\ HERE in m/%s/"
3871 .PD
3872 (F) Wrong syntax of character name literal \f(CW\*(C`\eN{charname}\*(C'\fR within
3873 double-quotish context. This can also happen when there is a space
3874 (or comment) between the \f(CW\*(C`\eN\*(C'\fR and the \f(CW\*(C`{\*(C'\fR in a regex with the \f(CW\*(C`/x\*(C'\fR modifier.
3875 This modifier does not change the requirement that the brace immediately
3876 follow the \f(CW\*(C`\eN\*(C'\fR.
3877 .IP "Missing braces on \eo{}" 4
3878 .IX Item "Missing braces on o{}"
3879 (F) A \f(CW\*(C`\eo\*(C'\fR must be followed immediately by a \f(CW\*(C`{\*(C'\fR in double-quotish context.
3880 .ie n .IP "Missing comma after first argument to %s function" 4
3881 .el .IP "Missing comma after first argument to \f(CW%s\fR function" 4
3882 .IX Item "Missing comma after first argument to %s function"
3883 (F) While certain functions allow you to specify a filehandle or an
3884 "indirect object" before the argument list, this ain't one of them.
3885 .IP "Missing comma after first argument to return" 4
3886 .IX Item "Missing comma after first argument to return"
3887 (F) While certain operators allow you to specify a filehandle or an
3888 "indirect object" before the argument list, \f(CW\*(C`return\*(C'\fR isn't one of
3889 them.
3890 .IP "Missing command in piped open" 4
3891 .IX Item "Missing command in piped open"
3892 (W pipe) You used the \f(CW\*(C`open(FH, "| command")\*(C'\fR or
3893 \&\f(CW\*(C`open(FH, "command |")\*(C'\fR construction, but the command was missing or
3894 blank.
3895 .IP "Missing control char name in \ec" 4
3896 .IX Item "Missing control char name in c"
3897 (F) A double-quoted string ended with "\ec", without the required control
3898 character name.
3899 .ie n .IP "Missing ']' in prototype for %s : %s" 4
3900 .el .IP "Missing ']' in prototype for \f(CW%s\fR : \f(CW%s\fR" 4
3901 .IX Item "Missing ']' in prototype for %s : %s"
3902 (W illegalproto) A grouping was started with \f(CW\*(C`[\*(C'\fR but never closed with \f(CW\*(C`]\*(C'\fR.
3903 .IP "Missing name in ""%s sub""" 4
3904 .IX Item "Missing name in ""%s sub"""
3905 (F) The syntax for lexically scoped subroutines requires that
3906 they have a name with which they can be found.
3907 .IP "Missing $ on loop variable" 4
3908 .IX Item "Missing $ on loop variable"
3909 (F) Apparently you've been programming in \fBcsh\fR too much. Variables
3910 are always mentioned with the $ in Perl, unlike in the shells, where it
3911 can vary from one line to the next.
3912 .ie n .IP "(Missing operator before %s?)" 4
3913 .el .IP "(Missing operator before \f(CW%s\fR?)" 4
3914 .IX Item "(Missing operator before %s?)"
3915 (S syntax) This is an educated guess made in conjunction with the message
3916 "%s found where operator expected". Often the missing operator is a comma.
3917 .ie n .IP "Missing or undefined argument to %s" 4
3918 .el .IP "Missing or undefined argument to \f(CW%s\fR" 4
3919 .IX Item "Missing or undefined argument to %s"
3920 (F) You tried to call \f(CW\*(C`require\*(C'\fR or \f(CW\*(C`do\*(C'\fR with no argument or with an
3921 undefined value as an argument. Require expects either a package name or
3922 a file-specification as an argument; do expects a filename. See
3923 "require EXPR" in perlfunc and "do EXPR" in perlfunc.
3924 .ie n .IP "Missing or undefined argument to %s via %{^HOOK}{require_\|_before}" 4
3925 .el .IP "Missing or undefined argument to \f(CW%s\fR via %{^HOOK}{require_\|_before}" 4
3926 .IX Item "Missing or undefined argument to %s via %{^HOOK}{require__before}"
3927 (F) A \f(CW\*(C`%{^HOOK}{require_\|_before}\*(C'\fR hook rewrote the name of the file being
3928 compiled with \f(CW\*(C`require\*(C'\fR or \f(CW\*(C`do\*(C'\fR with an empty string an undefined value
3929 which is forbidden. See "%{^HOOK}" in perlvar and "require EXPR" in perlfunc.
3930 .IP "Missing right brace on \e%c{} in regex; marked by <\-\-\ HERE in m/%s/" 4
3931 .IX Item "Missing right brace on %c{} in regex; marked by <--\ HERE in m/%s/"
3932 (F) Missing right brace in \f(CW\*(C`\ex{...}\*(C'\fR, \f(CW\*(C`\ep{...}\*(C'\fR, \f(CW\*(C`\eP{...}\*(C'\fR, or \f(CW\*(C`\eN{...}\*(C'\fR.
3933 .IP "Missing right brace on \eN{}" 4
3934 .IX Item "Missing right brace on N{}"
3935 .PD 0
3936 .IP "Missing right brace on \eN{} or unescaped left brace after \eN" 4
3937 .IX Item "Missing right brace on N{} or unescaped left brace after N"
3938 .PD
3939 (F) \f(CW\*(C`\eN\*(C'\fR has two meanings.
3940 .Sp
3941 The traditional one has it followed by a name enclosed in braces,
3942 meaning the character (or sequence of characters) given by that
3943 name. Thus \f(CW\*(C`\eN{ASTERISK}\*(C'\fR is another way of writing \f(CW\*(C`*\*(C'\fR, valid in both
3944 double-quoted strings and regular expression patterns. In patterns,
3945 it doesn't have the meaning an unescaped \f(CW\*(C`*\*(C'\fR does.
3946 .Sp
3947 Starting in Perl 5.12.0, \f(CW\*(C`\eN\*(C'\fR also can have an additional meaning (only)
3948 in patterns, namely to match a non-newline character. (This is short
3949 for \f(CW\*(C`[^\en]\*(C'\fR, and like \f(CW\*(C`.\*(C'\fR but is not affected by the \f(CW\*(C`/s\*(C'\fR regex modifier.)
3950 .Sp
3951 This can lead to some ambiguities. When \f(CW\*(C`\eN\*(C'\fR is not followed immediately
3952 by a left brace, Perl assumes the \f(CW\*(C`[^\en]\*(C'\fR meaning. Also, if the braces
3953 form a valid quantifier such as \f(CW\*(C`\eN{3}\*(C'\fR or \f(CW\*(C`\eN{5,}\*(C'\fR, Perl assumes that this
3954 means to match the given quantity of non-newlines (in these examples,
3955 3; and 5 or more, respectively). In all other case, where there is a
3956 \&\f(CW\*(C`\eN{\*(C'\fR and a matching \f(CW\*(C`}\*(C'\fR, Perl assumes that a character name is desired.
3957 .Sp
3958 However, if there is no matching \f(CW\*(C`}\*(C'\fR, Perl doesn't know if it was
3959 mistakenly omitted, or if \f(CW\*(C`[^\en]{\*(C'\fR was desired, and raises this error.
3960 If you meant the former, add the right brace; if you meant the latter,
3961 escape the brace with a backslash, like so: \f(CW\*(C`\eN\e{\*(C'\fR
3962 .IP "Missing right curly or square bracket" 4
3963 .IX Item "Missing right curly or square bracket"
3964 (F) The lexer counted more opening curly or square brackets than closing
3965 ones. As a general rule, you'll find it's missing near the place you
3966 were last editing.
3967 .IP "(Missing semicolon on previous line?)" 4
3968 .IX Item "(Missing semicolon on previous line?)"
3969 (S syntax) This is an educated guess made in conjunction with the message
3970 "%s found where operator expected". Don't automatically put a semicolon on
3971 the previous line just because you saw this message.
3972 .IP "Modification of a read-only value attempted" 4
3973 .IX Item "Modification of a read-only value attempted"
3974 (F) You tried, directly or indirectly, to change the value of a
3975 constant. You didn't, of course, try "2 = 1", because the compiler
3976 catches that. But an easy way to do the same thing is:
3977 .Sp
3978 .Vb 2
3979 \& sub mod { $_[0] = 1 }
3980 \& mod(2);
3981 .Ve
3982 .Sp
3983 Another way is to assign to a \fBsubstr()\fR that's off the end of the string.
3984 .Sp
3985 Yet another way is to assign to a \f(CW\*(C`foreach\*(C'\fR loop \fIVAR\fR when \fIVAR\fR
3986 is aliased to a constant in the look \fILIST\fR:
3987 .Sp
3988 .Vb 4
3989 \& $x = 1;
3990 \& foreach my $n ($x, 2) {
3991 \& $n *= 2; # modifies the $x, but fails on attempt to
3992 \& } # modify the 2
3993 .Ve
3994 .Sp
3995 PerlIO::scalar will also produce this message as a warning if you
3996 attempt to open a read-only scalar for writing.
3997 .ie n .IP "Modification of non-creatable array value attempted, %s" 4
3998 .el .IP "Modification of non-creatable array value attempted, \f(CW%s\fR" 4
3999 .IX Item "Modification of non-creatable array value attempted, %s"
4000 (F) You tried to make an array value spring into existence, and the
4001 subscript was probably negative, even counting from end of the array
4002 backwards.
4003 .ie n .IP "Modification of non-creatable hash value attempted, %s" 4
4004 .el .IP "Modification of non-creatable hash value attempted, \f(CW%s\fR" 4
4005 .IX Item "Modification of non-creatable hash value attempted, %s"
4006 (P) You tried to make a hash value spring into existence, and it
4007 couldn't be created for some peculiar reason.
4008 .IP "Module name must be constant" 4
4009 .IX Item "Module name must be constant"
4010 (F) Only a bare module name is allowed as the first argument to a "use".
4011 .IP "Module name required with \-%c option" 4
4012 .IX Item "Module name required with -%c option"
4013 (F) The \f(CW\*(C`\-M\*(C'\fR or \f(CW\*(C`\-m\*(C'\fR options say that Perl should load some module, but
4014 you omitted the name of the module. Consult
4015 perlrun for full details about \f(CW\*(C`\-M\*(C'\fR and \f(CW\*(C`\-m\*(C'\fR.
4016 .IP "More than one argument to '%s' open" 4
4017 .IX Item "More than one argument to '%s' open"
4018 (F) The \f(CW\*(C`open\*(C'\fR function has been asked to open multiple files. This
4019 can happen if you are trying to open a pipe to a command that takes a
4020 list of arguments, but have forgotten to specify a piped open mode.
4021 See "open" in perlfunc for details.
4022 .ie n .IP "mprotect for COW string %p %u failed with %d" 4
4023 .el .IP "mprotect for COW string \f(CW%p\fR \f(CW%u\fR failed with \f(CW%d\fR" 4
4024 .IX Item "mprotect for COW string %p %u failed with %d"
4025 (S) You compiled perl with \fB\-D\fRPERL_DEBUG_READONLY_COW (see
4026 "Copy on Write" in perlguts), but a shared string buffer
4027 could not be made read-only.
4028 .ie n .IP "mprotect for %p %u failed with %d" 4
4029 .el .IP "mprotect for \f(CW%p\fR \f(CW%u\fR failed with \f(CW%d\fR" 4
4030 .IX Item "mprotect for %p %u failed with %d"
4031 (S) You compiled perl with \fB\-D\fRPERL_DEBUG_READONLY_OPS (see perlhacktips),
4032 but an op tree could not be made read-only.
4033 .ie n .IP "mprotect RW for COW string %p %u failed with %d" 4
4034 .el .IP "mprotect RW for COW string \f(CW%p\fR \f(CW%u\fR failed with \f(CW%d\fR" 4
4035 .IX Item "mprotect RW for COW string %p %u failed with %d"
4036 (S) You compiled perl with \fB\-D\fRPERL_DEBUG_READONLY_COW (see
4037 "Copy on Write" in perlguts), but a read-only shared string
4038 buffer could not be made mutable.
4039 .ie n .IP "mprotect RW for %p %u failed with %d" 4
4040 .el .IP "mprotect RW for \f(CW%p\fR \f(CW%u\fR failed with \f(CW%d\fR" 4
4041 .IX Item "mprotect RW for %p %u failed with %d"
4042 (S) You compiled perl with \fB\-D\fRPERL_DEBUG_READONLY_OPS (see
4043 perlhacktips), but a read-only op tree could not be made
4044 mutable before freeing the ops.
4045 .IP "msg%s not implemented" 4
4046 .IX Item "msg%s not implemented"
4047 (F) You don't have System V message IPC on your system.
4048 .IP "Multidimensional hash lookup is disabled" 4
4049 .IX Item "Multidimensional hash lookup is disabled"
4050 (F) You supplied a list of subscripts to a hash lookup under
4051 \&\f(CW\*(C`no feature "multidimensional";\*(C'\fR, eg:
4052 .Sp
4053 .Vb 1
4054 \& $z = $foo{$x, $y};
4055 .Ve
4056 .Sp
4057 which by default acts like:
4058 .Sp
4059 .Vb 1
4060 \& $z = $foo{join($;, $x, $y)};
4061 .Ve
4062 .ie n .IP "Multidimensional syntax %s not supported" 4
4063 .el .IP "Multidimensional syntax \f(CW%s\fR not supported" 4
4064 .IX Item "Multidimensional syntax %s not supported"
4065 (W syntax) Multidimensional arrays aren't written like \f(CW$foo[1,2,3]\fR.
4066 They're written like \f(CW\*(C`$foo[1][2][3]\*(C'\fR, as in C.
4067 .IP "Multiple slurpy parameters not allowed" 4
4068 .IX Item "Multiple slurpy parameters not allowed"
4069 (F) In subroutine signatures, a slurpy parameter (\f(CW\*(C`@\*(C'\fR or \f(CW\*(C`%\*(C'\fR) must be
4070 the last parameter, and there must not be more than one of them; for
4071 example:
4072 .Sp
4073 .Vb 2
4074 \& sub foo ($x, @y) {} # legal
4075 \& sub foo ($x, @y, %) {} # invalid
4076 .Ve
4077 .IP "'/' must follow a numeric type in unpack" 4
4078 .IX Item "'/' must follow a numeric type in unpack"
4079 (F) You had an unpack template that contained a '/', but this did not
4080 follow some unpack specification producing a numeric value.
4081 See "pack" in perlfunc.
4082 .ie n .IP "%s must not be a named sequence in transliteration operator" 4
4083 .el .IP "\f(CW%s\fR must not be a named sequence in transliteration operator" 4
4084 .IX Item "%s must not be a named sequence in transliteration operator"
4085 (F) Transliteration (\f(CW\*(C`tr///\*(C'\fR and \f(CW\*(C`y///\*(C'\fR) transliterates individual
4086 characters. But a named sequence by definition is more than an
4087 individual character, and hence doing this operation on it doesn't make
4088 sense.
4089 .IP """my sub"" not yet implemented" 4
4090 .IX Item """my sub"" not yet implemented"
4091 (F) Lexically scoped subroutines are not yet implemented. Don't try
4092 that yet.
4093 .ie n .IP """my"" subroutine %s can't be in a package" 4
4094 .el .IP """my"" subroutine \f(CW%s\fR can't be in a package" 4
4095 .IX Item """my"" subroutine %s can't be in a package"
4096 (F) Lexically scoped subroutines aren't in a package, so it doesn't make
4097 sense to try to declare one with a package qualifier on the front.
4098 .ie n .IP """my %s"" used in sort comparison" 4
4099 .el .IP """my \f(CW%s\fR"" used in sort comparison" 4
4100 .IX Item """my %s"" used in sort comparison"
4101 (W syntax) The package variables \f(CW$a\fR and \f(CW$b\fR are used for sort comparisons.
4102 You used \f(CW$a\fR or \f(CW$b\fR in as an operand to the \f(CW\*(C`<=>\*(C'\fR or \f(CW\*(C`cmp\*(C'\fR operator inside a
4103 sort comparison block, and the variable had earlier been declared as a
4104 lexical variable. Either qualify the sort variable with the package
4105 name, or rename the lexical variable.
4106 .ie n .IP """my"" variable %s can't be in a package" 4
4107 .el .IP """my"" variable \f(CW%s\fR can't be in a package" 4
4108 .IX Item """my"" variable %s can't be in a package"
4109 (F) Lexically scoped variables aren't in a package, so it doesn't make
4110 sense to try to declare one with a package qualifier on the front. Use
4111 \&\fBlocal()\fR if you want to localize a package variable.
4112 .IP "Name ""%s::%s"" used only once: possible typo" 4
4113 .IX Item "Name ""%s::%s"" used only once: possible typo"
4114 (W once) Typographical errors often show up as unique variable
4115 names. If you had a good reason for having a unique name, then
4116 just mention it again somehow to suppress the message. The \f(CW\*(C`our\*(C'\fR
4117 declaration is also provided for this purpose.
4118 .Sp
4119 NOTE: This warning detects package symbols that have been used
4120 only once. This means lexical variables will never trigger this
4121 warning. It also means that all of the package variables \f(CW$c\fR, \f(CW@c\fR,
4122 \&\f(CW%c\fR, as well as *c, &c, sub c{}, c(), and c (the filehandle or
4123 format) are considered the same; if a program uses \f(CW$c\fR only once
4124 but also uses any of the others it will not trigger this warning.
4125 Symbols beginning with an underscore and symbols using special
4126 identifiers (q.v. perldata) are exempt from this warning.
4127 .IP "Need exactly 3 octal digits in regex; marked by <\-\-\ HERE in m/%s/" 4
4128 .IX Item "Need exactly 3 octal digits in regex; marked by <--\ HERE in m/%s/"
4129 (F) Within \f(CW\*(C`(?[\ \ \ ])\*(C'\fR, all constants interpreted as octal need to be
4130 exactly 3 digits long. This helps catch some ambiguities. If your
4131 constant is too short, add leading zeros, like
4132 .Sp
4133 .Vb 3
4134 \& (?[ [ \e078 ] ]) # Syntax error!
4135 \& (?[ [ \e0078 ] ]) # Works
4136 \& (?[ [ \e007 8 ] ]) # Clearer
4137 .Ve
4138 .Sp
4139 The maximum number this construct can express is \f(CW\*(C`\e777\*(C'\fR. If you
4140 need a larger one, you need to use \eo{} instead. If you meant
4141 two separate things, you need to separate them:
4142 .Sp
4143 .Vb 4
4144 \& (?[ [ \e7776 ] ]) # Syntax error!
4145 \& (?[ [ \eo{7776} ] ]) # One meaning
4146 \& (?[ [ \e777 6 ] ]) # Another meaning
4147 \& (?[ [ \e777 \e006 ] ]) # Still another
4148 .Ve
4149 .IP "Negative '/' count in unpack" 4
4150 .IX Item "Negative '/' count in unpack"
4151 (F) The length count obtained from a length/code unpack operation was
4152 negative. See "pack" in perlfunc.
4153 .IP "Negative length" 4
4154 .IX Item "Negative length"
4155 (F) You tried to do a read/write/send/recv operation with a buffer
4156 length that is less than 0. This is difficult to imagine.
4157 .IP "Negative offset to vec in lvalue context" 4
4158 .IX Item "Negative offset to vec in lvalue context"
4159 (F) When \f(CW\*(C`vec\*(C'\fR is called in an lvalue context, the second argument must be
4160 greater than or equal to zero.
4161 .IP "Negative repeat count does nothing" 4
4162 .IX Item "Negative repeat count does nothing"
4163 (W numeric) You tried to execute the
4164 \&\f(CW\*(C`x\*(C'\fR repetition operator fewer than 0
4165 times, which doesn't make sense.
4166 .IP "Nested quantifiers in regex; marked by <\-\-\ HERE in m/%s/" 4
4167 .IX Item "Nested quantifiers in regex; marked by <--\ HERE in m/%s/"
4168 (F) You can't quantify a quantifier without intervening parentheses.
4169 So things like ** or +* or ?* are illegal. The <\-\-\ HERE shows
4170 whereabouts in the regular expression the problem was discovered.
4171 .Sp
4172 Note that the minimal matching quantifiers, \f(CW\*(C`*?\*(C'\fR, \f(CW\*(C`+?\*(C'\fR, and
4173 \&\f(CW\*(C`??\*(C'\fR appear to be nested quantifiers, but aren't. See perlre.
4174 .ie n .IP "%s never introduced" 4
4175 .el .IP "\f(CW%s\fR never introduced" 4
4176 .IX Item "%s never introduced"
4177 (S internal) The symbol in question was declared but somehow went out of
4178 scope before it could possibly have been used.
4179 .IP "next::method/next::can/maybe::next::method cannot find enclosing method" 4
4180 .IX Item "next::method/next::can/maybe::next::method cannot find enclosing method"
4181 (F) \f(CW\*(C`next::method\*(C'\fR needs to be called within the context of a
4182 real method in a real package, and it could not find such a context.
4183 See mro.
4184 .IP "\eN in a character class must be a named character: \eN{...} in regex; marked by <\-\-\ HERE in m/%s/" 4
4185 .IX Item "N in a character class must be a named character: N{...} in regex; marked by <--\ HERE in m/%s/"
4186 (F) The new (as of Perl 5.12) meaning of \f(CW\*(C`\eN\*(C'\fR as \f(CW\*(C`[^\en]\*(C'\fR is not valid in a
4187 bracketed character class, for the same reason that \f(CW\*(C`.\*(C'\fR in a character
4188 class loses its specialness: it matches almost everything, which is
4189 probably not what you want.
4190 .IP "\eN{} here is restricted to one character in regex; marked by <\-\- HERE in m/%s/" 4
4191 .IX Item "N{} here is restricted to one character in regex; marked by <-- HERE in m/%s/"
4192 (F) Named Unicode character escapes (\f(CW\*(C`\eN{...}\*(C'\fR) may return a
4193 multi-character sequence. Even though a character class is
4194 supposed to match just one character of input, perl will match the
4195 whole thing correctly, except under certain conditions. These currently
4196 are
4197 .RS 4
4198 .ie n .IP "When the class is inverted (""[^...]"")" 4
4199 .el .IP "When the class is inverted (\f(CW[^...]\fR)" 4
4200 .IX Item "When the class is inverted ([^...])"
4201 The mathematically logical behavior for what matches when inverting
4202 is very different from what people expect, so we have decided to
4203 forbid it.
4204 .IP "The escape is the beginning or final end point of a range" 4
4205 .IX Item "The escape is the beginning or final end point of a range"
4206 Similarly unclear is what should be generated when the
4207 \&\f(CW\*(C`\eN{...}\*(C'\fR is used as one of the end points of the range, such as in
4208 .Sp
4209 .Vb 1
4210 \& [\ex{41}\-\eN{ARABIC SEQUENCE YEH WITH HAMZA ABOVE WITH AE}]
4211 .Ve
4212 .Sp
4213 What is meant here is unclear, as the \f(CW\*(C`\eN{...}\*(C'\fR escape is a sequence
4214 of code points, so this is made an error.
4215 .IP "In a regex set" 4
4216 .IX Item "In a regex set"
4217 The syntax \f(CW\*(C`(?[\ \ \ ])\*(C'\fR in a regular expression yields a list of
4218 single code points, none can be a sequence.
4219 .RE
4220 .RS 4
4221 .RE
4222 .ie n .IP "No %s allowed while running setuid" 4
4223 .el .IP "No \f(CW%s\fR allowed while running setuid" 4
4224 .IX Item "No %s allowed while running setuid"
4225 (F) Certain operations are deemed to be too insecure for a setuid or
4226 setgid script to even be allowed to attempt. Generally speaking there
4227 will be another way to do what you want that is, if not secure, at least
4228 securable. See perlsec.
4229 .IP "No code specified for \-%c" 4
4230 .IX Item "No code specified for -%c"
4231 (F) Perl's \fB\-e\fR and \fB\-E\fR command-line options require an argument. If
4232 you want to run an empty program, pass the empty string as a separate
4233 argument or run a program consisting of a single 0 or 1:
4234 .Sp
4235 .Vb 3
4236 \& perl \-e ""
4237 \& perl \-e0
4238 \& perl \-e1
4239 .Ve
4240 .ie n .IP "No comma allowed after %s" 4
4241 .el .IP "No comma allowed after \f(CW%s\fR" 4
4242 .IX Item "No comma allowed after %s"
4243 (F) A list operator that has a filehandle or "indirect object" is
4244 not allowed to have a comma between that and the following arguments.
4245 Otherwise it'd be just another one of the arguments.
4246 .Sp
4247 One possible cause for this is that you expected to have imported
4248 a constant to your name space with \fBuse\fR or \fBimport\fR while no such
4249 importing took place, it may for example be that your operating
4250 system does not support that particular constant. Hopefully you did
4251 use an explicit import list for the constants you expect to see;
4252 please see "use" in perlfunc and "import" in perlfunc. While an
4253 explicit import list would probably have caught this error earlier
4254 it naturally does not remedy the fact that your operating system
4255 still does not support that constant. Maybe you have a typo in
4256 the constants of the symbol import list of \fBuse\fR or \fBimport\fR or in the
4257 constant name at the line where this error was triggered?
4258 .IP "No command into which to pipe on command line" 4
4259 .IX Item "No command into which to pipe on command line"
4260 (F) An error peculiar to VMS. Perl handles its own command line
4261 redirection, and found a '|' at the end of the command line, so it
4262 doesn't know where you want to pipe the output from this command.
4263 .IP "No DB::DB routine defined" 4
4264 .IX Item "No DB::DB routine defined"
4265 (F) The currently executing code was compiled with the \fB\-d\fR switch, but
4266 for some reason the current debugger (e.g. \fIperl5db.pl\fR or a \f(CW\*(C`Devel::\*(C'\fR
4267 module) didn't define a routine to be called at the beginning of each
4268 statement.
4269 .IP "No dbm on this machine" 4
4270 .IX Item "No dbm on this machine"
4271 (P) This is counted as an internal error, because every machine should
4272 supply dbm nowadays, because Perl comes with SDBM. See SDBM_File.
4273 .IP "No DB::sub routine defined" 4
4274 .IX Item "No DB::sub routine defined"
4275 (F) The currently executing code was compiled with the \fB\-d\fR switch, but
4276 for some reason the current debugger (e.g. \fIperl5db.pl\fR or a \f(CW\*(C`Devel::\*(C'\fR
4277 module) didn't define a \f(CW\*(C`DB::sub\*(C'\fR routine to be called at the beginning
4278 of each ordinary subroutine call.
4279 .ie n .IP "No digits found for %s literal" 4
4280 .el .IP "No digits found for \f(CW%s\fR literal" 4
4281 .IX Item "No digits found for %s literal"
4282 (F) No hexadecimal digits were found following \f(CW\*(C`0x\*(C'\fR or no binary digits
4283 were found following \f(CW\*(C`0b\*(C'\fR.
4284 .IP "No directory specified for \-I" 4
4285 .IX Item "No directory specified for -I"
4286 (F) The \fB\-I\fR command-line switch requires a directory name as part of the
4287 \&\fIsame\fR argument. Use \fB\-Ilib\fR, for instance. \fB\-I lib\fR won't work.
4288 .IP "No error file after 2> or 2>> on command line" 4
4289 .IX Item "No error file after 2> or 2>> on command line"
4290 (F) An error peculiar to VMS. Perl handles its own command line
4291 redirection, and found a '2>' or a '2>>' on the command line, but can't
4292 find the name of the file to which to write data destined for stderr.
4293 .IP "No group ending character '%c' found in template" 4
4294 .IX Item "No group ending character '%c' found in template"
4295 (F) A pack or unpack template has an opening '(' or '[' without its
4296 matching counterpart. See "pack" in perlfunc.
4297 .IP "No input file after < on command line" 4
4298 .IX Item "No input file after < on command line"
4299 (F) An error peculiar to VMS. Perl handles its own command line
4300 redirection, and found a '<' on the command line, but can't find the
4301 name of the file from which to read data for stdin.
4302 .ie n .IP "No next::method '%s' found for %s" 4
4303 .el .IP "No next::method '%s' found for \f(CW%s\fR" 4
4304 .IX Item "No next::method '%s' found for %s"
4305 (F) \f(CW\*(C`next::method\*(C'\fR found no further instances of this method name
4306 in the remaining packages of the MRO of this class. If you don't want
4307 it throwing an exception, use \f(CW\*(C`maybe::next::method\*(C'\fR
4308 or \f(CW\*(C`next::can\*(C'\fR. See mro.
4309 .IP "Non-finite repeat count does nothing" 4
4310 .IX Item "Non-finite repeat count does nothing"
4311 (W numeric) You tried to execute the
4312 \&\f(CW\*(C`x\*(C'\fR repetition operator \f(CW\*(C`Inf\*(C'\fR (or
4313 \&\f(CW\*(C`\-Inf\*(C'\fR) or \f(CW\*(C`NaN\*(C'\fR times, which doesn't make sense.
4314 .IP "Non-hex character in regex; marked by <\-\-\ HERE in m/%s/" 4
4315 .IX Item "Non-hex character in regex; marked by <--\ HERE in m/%s/"
4316 (F) In a regular expression, there was a non-hexadecimal character where
4317 a hex one was expected, like
4318 .Sp
4319 .Vb 2
4320 \& (?[ [ \exDG ] ])
4321 \& (?[ [ \ex{DEKA} ] ])
4322 .Ve
4323 .IP "Non-hex character '%c' terminates \ex early. Resolved as ""%s""" 4
4324 .IX Item "Non-hex character '%c' terminates x early. Resolved as ""%s"""
4325 (W digit) In parsing a hexadecimal numeric constant, a character was
4326 unexpectedly encountered that isn't hexadecimal. The resulting value
4327 is as indicated.
4328 .Sp
4329 Note that, within braces, every character starting with the first
4330 non-hexadecimal up to the ending brace is ignored.
4331 .IP "Non-octal character in regex; marked by <\-\-\ HERE in m/%s/" 4
4332 .IX Item "Non-octal character in regex; marked by <--\ HERE in m/%s/"
4333 (F) In a regular expression, there was a non-octal character where
4334 an octal one was expected, like
4335 .Sp
4336 .Vb 1
4337 \& (?[ [ \eo{1278} ] ])
4338 .Ve
4339 .IP "Non-octal character '%c' terminates \eo early. Resolved as ""%s""" 4
4340 .IX Item "Non-octal character '%c' terminates o early. Resolved as ""%s"""
4341 (W digit) In parsing an octal numeric constant, a character was
4342 unexpectedly encountered that isn't octal. The resulting value
4343 is as indicated.
4344 .Sp
4345 When not using \f(CW\*(C`\eo{...}\*(C'\fR, you wrote something like \f(CW\*(C`\e08\*(C'\fR, or \f(CW\*(C`\e179\*(C'\fR
4346 in a double-quotish string. The resolution is as indicated, with all
4347 but the last digit treated as a single character, specified in octal.
4348 The last digit is the next character in the string. To tell Perl that
4349 this is indeed what you want, you can use the \f(CW\*(C`\eo{ }\*(C'\fR syntax, or use
4350 exactly three digits to specify the octal for the character.
4351 .Sp
4352 Note that, within braces, every character starting with the first
4353 non-octal up to the ending brace is ignored.
4354 .IP """no"" not allowed in expression" 4
4355 .IX Item """no"" not allowed in expression"
4356 (F) The "no" keyword is recognized and executed at compile time, and
4357 returns no useful value. See perlmod.
4358 .IP "Non-string passed as bitmask" 4
4359 .IX Item "Non-string passed as bitmask"
4360 (W misc) A number has been passed as a bitmask argument to \fBselect()\fR.
4361 Use the \fBvec()\fR function to construct the file descriptor bitmasks for
4362 select. See "select" in perlfunc.
4363 .IP "No output file after > on command line" 4
4364 .IX Item "No output file after > on command line"
4365 (F) An error peculiar to VMS. Perl handles its own command line
4366 redirection, and found a lone '>' at the end of the command line, so it
4367 doesn't know where you wanted to redirect stdout.
4368 .IP "No output file after > or >> on command line" 4
4369 .IX Item "No output file after > or >> on command line"
4370 (F) An error peculiar to VMS. Perl handles its own command line
4371 redirection, and found a '>' or a '>>' on the command line, but can't
4372 find the name of the file to which to write data destined for stdout.
4373 .ie n .IP "No package name allowed for subroutine %s in ""our""" 4
4374 .el .IP "No package name allowed for subroutine \f(CW%s\fR in ""our""" 4
4375 .IX Item "No package name allowed for subroutine %s in ""our"""
4376 .PD 0
4377 .ie n .IP "No package name allowed for variable %s in ""our""" 4
4378 .el .IP "No package name allowed for variable \f(CW%s\fR in ""our""" 4
4379 .IX Item "No package name allowed for variable %s in ""our"""
4380 .PD
4381 (F) Fully qualified subroutine and variable names are not allowed in "our"
4382 declarations, because that doesn't make much sense under existing rules.
4383 Such syntax is reserved for future extensions.
4384 .IP "No Perl script found in input" 4
4385 .IX Item "No Perl script found in input"
4386 (F) You called \f(CW\*(C`perl \-x\*(C'\fR, but no line was found in the file beginning
4387 with #! and containing the word "perl".
4388 .IP "No setregid available" 4
4389 .IX Item "No setregid available"
4390 (F) Configure didn't find anything resembling the \fBsetregid()\fR call for
4391 your system.
4392 .IP "No setreuid available" 4
4393 .IX Item "No setreuid available"
4394 (F) Configure didn't find anything resembling the \fBsetreuid()\fR call for
4395 your system.
4396 .ie n .IP "No such class %s" 4
4397 .el .IP "No such class \f(CW%s\fR" 4
4398 .IX Item "No such class %s"
4399 (F) You provided a class qualifier in a "my", "our" or "state"
4400 declaration, but this class doesn't exist at this point in your program.
4401 .ie n .IP "No such class field ""%s"" in variable %s of type %s" 4
4402 .el .IP "No such class field ""%s"" in variable \f(CW%s\fR of type \f(CW%s\fR" 4
4403 .IX Item "No such class field ""%s"" in variable %s of type %s"
4404 (F) You tried to access a key from a hash through the indicated typed
4405 variable but that key is not allowed by the package of the same type.
4406 The indicated package has restricted the set of allowed keys using the
4407 fields pragma.
4408 .ie n .IP "No such hook: %s" 4
4409 .el .IP "No such hook: \f(CW%s\fR" 4
4410 .IX Item "No such hook: %s"
4411 (F) You specified a signal hook that was not recognized by Perl.
4412 Currently, Perl accepts \f(CW\*(C`_\|_DIE_\|_\*(C'\fR and \f(CW\*(C`_\|_WARN_\|_\*(C'\fR as valid signal hooks.
4413 .IP "No such pipe open" 4
4414 .IX Item "No such pipe open"
4415 (P) An error peculiar to VMS. The internal routine \fBmy_pclose()\fR tried to
4416 close a pipe which hadn't been opened. This should have been caught
4417 earlier as an attempt to close an unopened filehandle.
4418 .IP "No such signal: SIG%s" 4
4419 .IX Item "No such signal: SIG%s"
4420 (W signal) You specified a signal name as a subscript to \f(CW%SIG\fR that was
4421 not recognized. Say \f(CW\*(C`kill \-l\*(C'\fR in your shell to see the valid signal
4422 names on your system.
4423 .IP "No Unicode property value wildcard matches:" 4
4424 .IX Item "No Unicode property value wildcard matches:"
4425 (W regexp) You specified a wildcard for a Unicode property value, but
4426 there is no property value in the current Unicode release that matches
4427 it. Check your spelling.
4428 .IP "Not a CODE reference" 4
4429 .IX Item "Not a CODE reference"
4430 (F) Perl was trying to evaluate a reference to a code value (that is, a
4431 subroutine), but found a reference to something else instead. You can
4432 use the \fBref()\fR function to find out what kind of ref it really was. See
4433 also perlref.
4434 .IP "Not a GLOB reference" 4
4435 .IX Item "Not a GLOB reference"
4436 (F) Perl was trying to evaluate a reference to a "typeglob" (that is, a
4437 symbol table entry that looks like \f(CW*foo\fR), but found a reference to
4438 something else instead. You can use the \fBref()\fR function to find out what
4439 kind of ref it really was. See perlref.
4440 .IP "Not a HASH reference" 4
4441 .IX Item "Not a HASH reference"
4442 (F) Perl was trying to evaluate a reference to a hash value, but found a
4443 reference to something else instead. You can use the \fBref()\fR function to
4444 find out what kind of ref it really was. See perlref.
4445 .IP "'#' not allowed immediately following a sigil in a subroutine signature" 4
4446 .IX Item "'#' not allowed immediately following a sigil in a subroutine signature"
4447 (F) In a subroutine signature definition, a comment following a sigil
4448 (\f(CW\*(C`$\*(C'\fR, \f(CW\*(C`@\*(C'\fR or \f(CW\*(C`%\*(C'\fR), needs to be separated by whitespace or a comma etc., in
4449 particular to avoid confusion with the \f(CW$#\fR variable. For example:
4450 .Sp
4451 .Vb 6
4452 \& # bad
4453 \& sub f ($# ignore first arg
4454 \& , $y) {}
4455 \& # good
4456 \& sub f ($, # ignore first arg
4457 \& $y) {}
4458 .Ve
4459 .IP "Not an ARRAY reference" 4
4460 .IX Item "Not an ARRAY reference"
4461 (F) Perl was trying to evaluate a reference to an array value, but found
4462 a reference to something else instead. You can use the \fBref()\fR function
4463 to find out what kind of ref it really was. See perlref.
4464 .IP "Not a SCALAR reference" 4
4465 .IX Item "Not a SCALAR reference"
4466 (F) Perl was trying to evaluate a reference to a scalar value, but found
4467 a reference to something else instead. You can use the \fBref()\fR function
4468 to find out what kind of ref it really was. See perlref.
4469 .IP "Not a subroutine reference" 4
4470 .IX Item "Not a subroutine reference"
4471 (F) Perl was trying to evaluate a reference to a code value (that is, a
4472 subroutine), but found a reference to something else instead. You can
4473 use the \fBref()\fR function to find out what kind of ref it really was. See
4474 also perlref.
4475 .IP "Not a subroutine reference in overload table" 4
4476 .IX Item "Not a subroutine reference in overload table"
4477 (F) An attempt was made to specify an entry in an overloading table that
4478 doesn't somehow point to a valid subroutine. See overload.
4479 .ie n .IP "Not enough arguments for %s" 4
4480 .el .IP "Not enough arguments for \f(CW%s\fR" 4
4481 .IX Item "Not enough arguments for %s"
4482 (F) The function requires more arguments than you specified.
4483 .IP "Not enough format arguments" 4
4484 .IX Item "Not enough format arguments"
4485 (W syntax) A format specified more picture fields than the next line
4486 supplied. See perlform.
4487 .ie n .IP "%s: not found" 4
4488 .el .IP "\f(CW%s:\fR not found" 4
4489 .IX Item "%s: not found"
4490 (A) You've accidentally run your script through the Bourne shell instead
4491 of Perl. Check the #! line, or manually feed your script into Perl
4492 yourself.
4493 .IP "no UTC offset information; assuming local time is UTC" 4
4494 .IX Item "no UTC offset information; assuming local time is UTC"
4495 (S) A warning peculiar to VMS. Perl was unable to find the local
4496 timezone offset, so it's assuming that local system time is equivalent
4497 to UTC. If it's not, define the logical name
4498 \&\fISYS$TIMEZONE_DIFFERENTIAL\fR to translate to the number of seconds which
4499 need to be added to UTC to get local time.
4500 .IP "NULL OP IN RUN" 4
4501 .IX Item "NULL OP IN RUN"
4502 (S debugging) Some internal routine called \fBrun()\fR with a null opcode
4503 pointer.
4504 .IP "Null picture in formline" 4
4505 .IX Item "Null picture in formline"
4506 (F) The first argument to formline must be a valid format picture
4507 specification. It was found to be empty, which probably means you
4508 supplied it an uninitialized value. See perlform.
4509 .IP "NULL regexp parameter" 4
4510 .IX Item "NULL regexp parameter"
4511 (P) The internal pattern matching routines are out of their gourd.
4512 .IP "Number too long" 4
4513 .IX Item "Number too long"
4514 (F) Perl limits the representation of decimal numbers in programs to
4515 about 250 characters. You've exceeded that length. Future
4516 versions of Perl are likely to eliminate this arbitrary limitation. In
4517 the meantime, try using scientific notation (e.g. "1e6" instead of
4518 "1_000_000").
4519 .IP "Number with no digits" 4
4520 .IX Item "Number with no digits"
4521 (F) Perl was looking for a number but found nothing that looked like
4522 a number. This happens, for example with \f(CW\*(C`\eo{}\*(C'\fR, with no number between
4523 the braces.
4524 .IP "Numeric format result too large" 4
4525 .IX Item "Numeric format result too large"
4526 (F) The length of the result of a numeric format supplied to \fBsprintf()\fR
4527 or \fBprintf()\fR would have been too large for the underlying C function to
4528 report. This limit is typically 2GB.
4529 .IP "Numeric variables with more than one digit may not start with '0'" 4
4530 .IX Item "Numeric variables with more than one digit may not start with '0'"
4531 (F) The only numeric variable which is allowed to start with a 0 is \f(CW$0\fR,
4532 and you mentioned a variable that starts with 0 that has more than one
4533 digit. You probably want to remove the leading 0, or if the intent was
4534 to express a variable name in octal you should convert to decimal.
4535 .IP "Octal number > 037777777777 non-portable" 4
4536 .IX Item "Octal number > 037777777777 non-portable"
4537 (W portable) The octal number you specified is larger than 2**32\-1
4538 (4294967295) and therefore non-portable between systems. See
4539 perlport for more on portability concerns.
4540 .IP "Odd name/value argument for subroutine '%s'" 4
4541 .IX Item "Odd name/value argument for subroutine '%s'"
4542 (F) A subroutine using a slurpy hash parameter in its signature
4543 received an odd number of arguments to populate the hash. It requires
4544 the arguments to be paired, with the same number of keys as values.
4545 The caller of the subroutine is presumably at fault.
4546 .Sp
4547 The message attempts to include the name of the called subroutine. If the
4548 subroutine has been aliased, the subroutine's original name will be shown,
4549 regardless of what name the caller used.
4550 .IP "Odd number of arguments for overload::constant" 4
4551 .IX Item "Odd number of arguments for overload::constant"
4552 (W overload) The call to overload::constant contained an odd number of
4553 arguments. The arguments should come in pairs.
4554 .IP "Odd number of arguments passed to ""%s"" constructor" 4
4555 .IX Item "Odd number of arguments passed to ""%s"" constructor"
4556 (S) The constructor for the given class was called with an odd
4557 number of arguments.
4558 .Sp
4559 Class constructors accept named arguments as a list and expect pairs
4560 of name followed by value as if you were initialising a hash.
4561 .IP "Odd number of elements in anonymous hash" 4
4562 .IX Item "Odd number of elements in anonymous hash"
4563 (W misc) You specified an odd number of elements to initialize a hash,
4564 which is odd, because hashes come in key/value pairs.
4565 .IP "Odd number of elements in export_lexically" 4
4566 .IX Item "Odd number of elements in export_lexically"
4567 (F) A call to "export_lexically" in builtin contained an odd number of
4568 arguments. This is not permitted, because each name must be paired with a
4569 valid reference value.
4570 .IP "Odd number of elements in hash assignment" 4
4571 .IX Item "Odd number of elements in hash assignment"
4572 (W misc) You specified an odd number of elements to initialize a hash,
4573 which is odd, because hashes come in key/value pairs.
4574 .IP "Odd number of elements in hash field initialization" 4
4575 .IX Item "Odd number of elements in hash field initialization"
4576 (W misc) You specified an odd number of elements to initialise a hash
4577 field of an object. Hashes are initialised from a list of key/value
4578 pairs so there must be a corresponding value to every key. The final
4579 missing value will be filled in with undef instead.
4580 .IP "Offset outside string" 4
4581 .IX Item "Offset outside string"
4582 (W layer) You tried to do a read/write/send/recv/seek operation
4583 with an offset pointing outside the buffer. This is difficult to
4584 imagine. The sole exceptions to this are that zero padding will
4585 take place when going past the end of the string when either
4586 \&\f(CWsysread()\fRing a file, or when seeking past the end of a scalar opened
4587 for I/O (in anticipation of future reads and to imitate the behavior
4588 with real files).
4589 .IP "Old package separator ""'"" deprecated" 4
4590 .IX Item "Old package separator ""'"" deprecated"
4591 (D deprecated::apostrophe_as_package_separator, syntax) You used the old package
4592 separator "'" in a variable, subroutine or package name. Support for the
4593 old package separator will be removed in Perl 5.42.
4594 .IP "Old package separator used in string" 4
4595 .IX Item "Old package separator used in string"
4596 (D deprecated::apostrophe_as_package_separator, syntax) You used the old package
4597 separator, "'", in a variable named inside a double-quoted string; e.g.,
4598 \&\f(CW"In $name\*(Aqs house"\fR. This is equivalent to \f(CW"In $name::s house"\fR. If
4599 you meant the former, put a backslash before the apostrophe
4600 (\f(CW"In $name\e\*(Aqs house"\fR).
4601 .Sp
4602 Support for the old package separator will be removed in Perl 5.42.
4603 .IP "Only scalar fields can take a :param attribute" 4
4604 .IX Item "Only scalar fields can take a :param attribute"
4605 (F) You tried to apply the \f(CW\*(C`:param\*(C'\fR attribute to an array or hash field.
4606 Currently this is not permitted.
4607 .ie n .IP "%s() on unopened %s" 4
4608 .el .IP "%s() on unopened \f(CW%s\fR" 4
4609 .IX Item "%s() on unopened %s"
4610 (W unopened) An I/O operation was attempted on a filehandle that was
4611 never initialized. You need to do an \fBopen()\fR, a \fBsysopen()\fR, or a \fBsocket()\fR
4612 call, or call a constructor from the FileHandle package.
4613 .ie n .IP "\-%s on unopened filehandle %s" 4
4614 .el .IP "\-%s on unopened filehandle \f(CW%s\fR" 4
4615 .IX Item "-%s on unopened filehandle %s"
4616 (W unopened) You tried to invoke a file test operator on a filehandle
4617 that isn't open. Check your control flow. See also "\-X" in perlfunc.
4618 .IP "oops: oopsAV" 4
4619 .IX Item "oops: oopsAV"
4620 (S internal) An internal warning that the grammar is screwed up.
4621 .IP "oops: oopsHV" 4
4622 .IX Item "oops: oopsHV"
4623 (S internal) An internal warning that the grammar is screwed up.
4624 .IP "Operand with no preceding operator in regex; marked by <\-\-\ HERE in m/%s/" 4
4625 .IX Item "Operand with no preceding operator in regex; marked by <--\ HERE in m/%s/"
4626 (F) You wrote something like
4627 .Sp
4628 .Vb 1
4629 \& (?[ \ep{Digit} \ep{Thai} ])
4630 .Ve
4631 .Sp
4632 There are two operands, but no operator giving how you want to combine
4633 them.
4634 .ie n .IP "Operation ""%s"": no method found, %s" 4
4635 .el .IP "Operation ""%s"": no method found, \f(CW%s\fR" 4
4636 .IX Item "Operation ""%s"": no method found, %s"
4637 (F) An attempt was made to perform an overloaded operation for which no
4638 handler was defined. While some handlers can be autogenerated in terms
4639 of other handlers, there is no default handler for any operation, unless
4640 the \f(CW\*(C`fallback\*(C'\fR overloading key is specified to be true. See overload.
4641 .IP "Operation ""%s"" returns its argument for non-Unicode code point 0x%X" 4
4642 .IX Item "Operation ""%s"" returns its argument for non-Unicode code point 0x%X"
4643 (S non_unicode) You performed an operation requiring Unicode rules
4644 on a code point that is not in Unicode, so what it should do is not
4645 defined. Perl has chosen to have it do nothing, and warn you.
4646 .Sp
4647 If the operation shown is "ToFold", it means that case-insensitive
4648 matching in a regular expression was done on the code point.
4649 .Sp
4650 If you know what you are doing you can turn off this warning by
4651 \&\f(CW\*(C`no warnings \*(Aqnon_unicode\*(Aq;\*(C'\fR.
4652 .IP "Operation ""%s"" returns its argument for UTF\-16 surrogate U+%X" 4
4653 .IX Item "Operation ""%s"" returns its argument for UTF-16 surrogate U+%X"
4654 (S surrogate) You performed an operation requiring Unicode
4655 rules on a Unicode surrogate. Unicode frowns upon the use
4656 of surrogates for anything but storing strings in UTF\-16, but
4657 rules are (reluctantly) defined for the surrogates, and
4658 they are to do nothing for this operation. Because the use of
4659 surrogates can be dangerous, Perl warns.
4660 .Sp
4661 If the operation shown is "ToFold", it means that case-insensitive
4662 matching in a regular expression was done on the code point.
4663 .Sp
4664 If you know what you are doing you can turn off this warning by
4665 \&\f(CW\*(C`no warnings \*(Aqsurrogate\*(Aq;\*(C'\fR.
4666 .ie n .IP "Operator or semicolon missing before %s" 4
4667 .el .IP "Operator or semicolon missing before \f(CW%s\fR" 4
4668 .IX Item "Operator or semicolon missing before %s"
4669 (S ambiguous) You used a variable or subroutine call where the parser
4670 was expecting an operator. The parser has assumed you really meant to
4671 use an operator, but this is highly likely to be incorrect. For
4672 example, if you say "*foo *foo" it will be interpreted as if you said
4673 "*foo * 'foo'".
4674 .IP "Optional parameter lacks default expression" 4
4675 .IX Item "Optional parameter lacks default expression"
4676 (F) In a subroutine signature, you wrote something like "$x =", making a
4677 named optional parameter without a default value. A nameless optional
4678 parameter is permitted to have no default value, but a named one must
4679 have a specific default. You probably want "$x = undef".
4680 .ie n .IP """our"" variable %s redeclared" 4
4681 .el .IP """our"" variable \f(CW%s\fR redeclared" 4
4682 .IX Item """our"" variable %s redeclared"
4683 (W shadow) You seem to have already declared the same global once before
4684 in the current lexical scope.
4685 .IP "Out of memory!" 4
4686 .IX Item "Out of memory!"
4687 (X) The \fBmalloc()\fR function returned 0, indicating there was insufficient
4688 remaining memory (or virtual memory) to satisfy the request. Perl has
4689 no option but to exit immediately.
4690 .Sp
4691 At least in Unix you may be able to get past this by increasing your
4692 process datasize limits: in csh/tcsh use \f(CW\*(C`limit\*(C'\fR and
4693 \&\f(CW\*(C`limit datasize n\*(C'\fR (where \f(CW\*(C`n\*(C'\fR is the number of kilobytes) to check
4694 the current limits and change them, and in ksh/bash/zsh use \f(CW\*(C`ulimit \-a\*(C'\fR
4695 and \f(CW\*(C`ulimit \-d n\*(C'\fR, respectively.
4696 .ie n .IP "Out of memory during %s extend" 4
4697 .el .IP "Out of memory during \f(CW%s\fR extend" 4
4698 .IX Item "Out of memory during %s extend"
4699 (X) An attempt was made to extend an array, a list, or a string beyond
4700 the largest possible memory allocation.
4701 .ie n .IP "Out of memory during ""large"" request for %s" 4
4702 .el .IP "Out of memory during ""large"" request for \f(CW%s\fR" 4
4703 .IX Item "Out of memory during ""large"" request for %s"
4704 (F) The \fBmalloc()\fR function returned 0, indicating there was insufficient
4705 remaining memory (or virtual memory) to satisfy the request. However,
4706 the request was judged large enough (compile-time default is 64K), so a
4707 possibility to shut down by trapping this error is granted.
4708 .ie n .IP "Out of memory during request for %s" 4
4709 .el .IP "Out of memory during request for \f(CW%s\fR" 4
4710 .IX Item "Out of memory during request for %s"
4711 (X)(F) The \fBmalloc()\fR function returned 0, indicating there was
4712 insufficient remaining memory (or virtual memory) to satisfy the
4713 request.
4714 .Sp
4715 The request was judged to be small, so the possibility to trap it
4716 depends on the way perl was compiled. By default it is not trappable.
4717 However, if compiled for this, Perl may use the contents of \f(CW$^M\fR as an
4718 emergency pool after \fBdie()\fRing with this message. In this case the error
4719 is trappable \fIonce\fR, and the error message will include the line and file
4720 where the failed request happened.
4721 .IP "Out of memory during ridiculously large request" 4
4722 .IX Item "Out of memory during ridiculously large request"
4723 (F) You can't allocate more than 2^31+"small amount" bytes. This error
4724 is most likely to be caused by a typo in the Perl program. e.g.,
4725 \&\f(CW$arr[time]\fR instead of \f(CW$arr[$time]\fR.
4726 .IP "Out of memory during vec in lvalue context" 4
4727 .IX Item "Out of memory during vec in lvalue context"
4728 (F) An attempt was made to extend a string beyond the largest possible memory
4729 allocation by assigning to \f(CWvec()\fR called with a large second argument.
4730 .IP "Out of memory for yacc stack" 4
4731 .IX Item "Out of memory for yacc stack"
4732 (F) The yacc parser wanted to grow its stack so it could continue
4733 parsing, but \fBrealloc()\fR wouldn't give it more memory, virtual or
4734 otherwise.
4735 .IP "Out of memory in perl:%s" 4
4736 .IX Item "Out of memory in perl:%s"
4737 (X) A low-level memory allocation routine failed, indicating there was
4738 insufficient remaining (virtual) memory to satisfy the request. Perl has no
4739 option but to exit immediately.
4740 .Sp
4741 At least in Unix you may be able to get past this by increasing your process
4742 datasize limits: in csh/tcsh use \f(CW\*(C`limit\*(C'\fR and \f(CW\*(C`limit datasize n\*(C'\fR (where \f(CW\*(C`n\*(C'\fR
4743 is the number of kilobytes) to check the current limits and change them, and in
4744 ksh/bash/zsh use \f(CW\*(C`ulimit \-a\*(C'\fR and \f(CW\*(C`ulimit \-d n\*(C'\fR, respectively.
4745 .IP "'.' outside of string in pack" 4
4746 .IX Item "'.' outside of string in pack"
4747 (F) The argument to a '.' in your template tried to move the working
4748 position to before the start of the packed string being built.
4749 .IP "'@' outside of string in unpack" 4
4750 .IX Item "'@' outside of string in unpack"
4751 (F) You had a template that specified an absolute position outside
4752 the string being unpacked. See "pack" in perlfunc.
4753 .IP "'@' outside of string with malformed UTF\-8 in unpack" 4
4754 .IX Item "'@' outside of string with malformed UTF-8 in unpack"
4755 (F) You had a template that specified an absolute position outside
4756 the string being unpacked. The string being unpacked was also invalid
4757 UTF\-8. See "pack" in perlfunc.
4758 .IP "overload arg '%s' is invalid" 4
4759 .IX Item "overload arg '%s' is invalid"
4760 (W overload) The overload pragma was passed an argument it did not
4761 recognize. Did you mistype an operator?
4762 .IP "Overloaded dereference did not return a reference" 4
4763 .IX Item "Overloaded dereference did not return a reference"
4764 (F) An object with an overloaded dereference operator was dereferenced,
4765 but the overloaded operation did not return a reference. See
4766 overload.
4767 .IP "Overloaded qr did not return a REGEXP" 4
4768 .IX Item "Overloaded qr did not return a REGEXP"
4769 (F) An object with a \f(CW\*(C`qr\*(C'\fR overload was used as part of a match, but the
4770 overloaded operation didn't return a compiled regexp. See overload.
4771 .ie n .IP "%s package attribute may clash with future reserved word: %s" 4
4772 .el .IP "\f(CW%s\fR package attribute may clash with future reserved word: \f(CW%s\fR" 4
4773 .IX Item "%s package attribute may clash with future reserved word: %s"
4774 (W reserved) A lowercase attribute name was used that had a
4775 package-specific handler. That name might have a meaning to Perl itself
4776 some day, even though it doesn't yet. Perhaps you should use a
4777 mixed-case attribute name, instead. See attributes.
4778 .IP "pack/unpack repeat count overflow" 4
4779 .IX Item "pack/unpack repeat count overflow"
4780 (F) You can't specify a repeat count so large that it overflows your
4781 signed integers. See "pack" in perlfunc.
4782 .IP "page overflow" 4
4783 .IX Item "page overflow"
4784 (W io) A single call to \fBwrite()\fR produced more lines than can fit on a
4785 page. See perlform.
4786 .ie n .IP "panic: %s" 4
4787 .el .IP "panic: \f(CW%s\fR" 4
4788 .IX Item "panic: %s"
4789 (P) An internal error.
4790 .ie n .IP "panic: attempt to call %s in %s" 4
4791 .el .IP "panic: attempt to call \f(CW%s\fR in \f(CW%s\fR" 4
4792 .IX Item "panic: attempt to call %s in %s"
4793 (P) One of the file test operators entered a code branch that calls
4794 an ACL related-function, but that function is not available on this
4795 platform. Earlier checks mean that it should not be possible to
4796 enter this branch on this platform.
4797 .IP "panic: child pseudo-process was never scheduled" 4
4798 .IX Item "panic: child pseudo-process was never scheduled"
4799 (P) A child pseudo-process in the ithreads implementation on Windows
4800 was not scheduled within the time period allowed and therefore was not
4801 able to initialize properly.
4802 .IP "panic: ck_grep, type=%u" 4
4803 .IX Item "panic: ck_grep, type=%u"
4804 (P) Failed an internal consistency check trying to compile a grep.
4805 .ie n .IP "panic: corrupt saved stack index %ld" 4
4806 .el .IP "panic: corrupt saved stack index \f(CW%ld\fR" 4
4807 .IX Item "panic: corrupt saved stack index %ld"
4808 (P) The savestack was requested to restore more localized values than
4809 there are in the savestack.
4810 .IP "panic: del_backref" 4
4811 .IX Item "panic: del_backref"
4812 (P) Failed an internal consistency check while trying to reset a weak
4813 reference.
4814 .ie n .IP "panic: fold_constants JMPENV_PUSH returned %d" 4
4815 .el .IP "panic: fold_constants JMPENV_PUSH returned \f(CW%d\fR" 4
4816 .IX Item "panic: fold_constants JMPENV_PUSH returned %d"
4817 (P) While attempting folding constants an exception other than an \f(CW\*(C`eval\*(C'\fR
4818 failure was caught.
4819 .ie n .IP "panic: frexp: %f" 4
4820 .el .IP "panic: frexp: \f(CW%f\fR" 4
4821 .IX Item "panic: frexp: %f"
4822 (P) The library function \fBfrexp()\fR failed, making printf("%f") impossible.
4823 .IP "panic: goto, type=%u, ix=%ld" 4
4824 .IX Item "panic: goto, type=%u, ix=%ld"
4825 (P) We popped the context stack to a context with the specified label,
4826 and then discovered it wasn't a context we know how to do a goto in.
4827 .IP "panic: gp_free failed to free glob pointer" 4
4828 .IX Item "panic: gp_free failed to free glob pointer"
4829 (P) The internal routine used to clear a typeglob's entries tried
4830 repeatedly, but each time something re-created entries in the glob.
4831 Most likely the glob contains an object with a reference back to
4832 the glob and a destructor that adds a new object to the glob.
4833 .ie n .IP "panic: INTERPCASEMOD, %s" 4
4834 .el .IP "panic: INTERPCASEMOD, \f(CW%s\fR" 4
4835 .IX Item "panic: INTERPCASEMOD, %s"
4836 (P) The lexer got into a bad state at a case modifier.
4837 .ie n .IP "panic: INTERPCONCAT, %s" 4
4838 .el .IP "panic: INTERPCONCAT, \f(CW%s\fR" 4
4839 .IX Item "panic: INTERPCONCAT, %s"
4840 (P) The lexer got into a bad state parsing a string with brackets.
4841 .IP "panic: kid popen errno read" 4
4842 .IX Item "panic: kid popen errno read"
4843 (F) A forked child returned an incomprehensible message about its errno.
4844 .ie n .IP "panic: leave_scope inconsistency %u" 4
4845 .el .IP "panic: leave_scope inconsistency \f(CW%u\fR" 4
4846 .IX Item "panic: leave_scope inconsistency %u"
4847 (P) The savestack probably got out of sync. At least, there was an
4848 invalid enum on the top of it.
4849 .IP "panic: magic_killbackrefs" 4
4850 .IX Item "panic: magic_killbackrefs"
4851 (P) Failed an internal consistency check while trying to reset all weak
4852 references to an object.
4853 .ie n .IP "panic: malloc, %s" 4
4854 .el .IP "panic: malloc, \f(CW%s\fR" 4
4855 .IX Item "panic: malloc, %s"
4856 (P) Something requested a negative number of bytes of malloc.
4857 .IP "panic: memory wrap" 4
4858 .IX Item "panic: memory wrap"
4859 (P) Something tried to allocate either more memory than possible or a
4860 negative amount.
4861 .ie n .IP "panic: newFORLOOP, %s" 4
4862 .el .IP "panic: newFORLOOP, \f(CW%s\fR" 4
4863 .IX Item "panic: newFORLOOP, %s"
4864 (P) The parser failed an internal consistency check while trying to parse
4865 a \f(CW\*(C`foreach\*(C'\fR loop.
4866 .ie n .IP "panic: pad_alloc, %p!=%p" 4
4867 .el .IP "panic: pad_alloc, \f(CW%p\fR!=%p" 4
4868 .IX Item "panic: pad_alloc, %p!=%p"
4869 (P) The compiler got confused about which scratch pad it was allocating
4870 and freeing temporaries and lexicals from.
4871 .ie n .IP "panic: pad_free curpad, %p!=%p" 4
4872 .el .IP "panic: pad_free curpad, \f(CW%p\fR!=%p" 4
4873 .IX Item "panic: pad_free curpad, %p!=%p"
4874 (P) The compiler got confused about which scratch pad it was allocating
4875 and freeing temporaries and lexicals from.
4876 .IP "panic: pad_free po" 4
4877 .IX Item "panic: pad_free po"
4878 (P) A zero scratch pad offset was detected internally. An attempt was
4879 made to free a target that had not been allocated to begin with.
4880 .ie n .IP "panic: pad_reset curpad, %p!=%p" 4
4881 .el .IP "panic: pad_reset curpad, \f(CW%p\fR!=%p" 4
4882 .IX Item "panic: pad_reset curpad, %p!=%p"
4883 (P) The compiler got confused about which scratch pad it was allocating
4884 and freeing temporaries and lexicals from.
4885 .IP "panic: pad_sv po" 4
4886 .IX Item "panic: pad_sv po"
4887 (P) A zero scratch pad offset was detected internally. Most likely
4888 an operator needed a target but that target had not been allocated
4889 for whatever reason.
4890 .ie n .IP "panic: pad_swipe curpad, %p!=%p" 4
4891 .el .IP "panic: pad_swipe curpad, \f(CW%p\fR!=%p" 4
4892 .IX Item "panic: pad_swipe curpad, %p!=%p"
4893 (P) The compiler got confused about which scratch pad it was allocating
4894 and freeing temporaries and lexicals from.
4895 .IP "panic: pad_swipe po" 4
4896 .IX Item "panic: pad_swipe po"
4897 (P) An invalid scratch pad offset was detected internally.
4898 .IP "panic: pp_iter, type=%u" 4
4899 .IX Item "panic: pp_iter, type=%u"
4900 (P) The foreach iterator got called in a non-loop context frame.
4901 .IP "panic: pp_match%s" 4
4902 .IX Item "panic: pp_match%s"
4903 (P) The internal \fBpp_match()\fR routine was called with invalid operational
4904 data.
4905 .ie n .IP "panic: realloc, %s" 4
4906 .el .IP "panic: realloc, \f(CW%s\fR" 4
4907 .IX Item "panic: realloc, %s"
4908 (P) Something requested a negative number of bytes of realloc.
4909 .IP "panic: reference miscount on nsv in \fBsv_replace()\fR (%d != 1)" 4
4910 .IX Item "panic: reference miscount on nsv in sv_replace() (%d != 1)"
4911 (P) The internal \fBsv_replace()\fR function was handed a new SV with a
4912 reference count other than 1.
4913 .ie n .IP "panic: restartop in %s" 4
4914 .el .IP "panic: restartop in \f(CW%s\fR" 4
4915 .IX Item "panic: restartop in %s"
4916 (P) Some internal routine requested a goto (or something like it), and
4917 didn't supply the destination.
4918 .IP "panic: return, type=%u" 4
4919 .IX Item "panic: return, type=%u"
4920 (P) We popped the context stack to a subroutine or eval context, and
4921 then discovered it wasn't a subroutine or eval context.
4922 .ie n .IP "panic: scan_num, %s" 4
4923 .el .IP "panic: scan_num, \f(CW%s\fR" 4
4924 .IX Item "panic: scan_num, %s"
4925 (P) \fBscan_num()\fR got called on something that wasn't a number.
4926 .IP "panic: Sequence (?{...}): no code block found in regex m/%s/" 4
4927 .IX Item "panic: Sequence (?{...}): no code block found in regex m/%s/"
4928 (P) While compiling a pattern that has embedded (?{}) or (??{}) code
4929 blocks, perl couldn't locate the code block that should have already been
4930 seen and compiled by perl before control passed to the regex compiler.
4931 .ie n .IP "panic: sv_chop %s" 4
4932 .el .IP "panic: sv_chop \f(CW%s\fR" 4
4933 .IX Item "panic: sv_chop %s"
4934 (P) The \fBsv_chop()\fR routine was passed a position that is not within the
4935 scalar's string buffer.
4936 .IP "panic: sv_insert, midend=%p, bigend=%p" 4
4937 .IX Item "panic: sv_insert, midend=%p, bigend=%p"
4938 (P) The \fBsv_insert()\fR routine was told to remove more string than there
4939 was string.
4940 .IP "panic: top_env" 4
4941 .IX Item "panic: top_env"
4942 (P) The compiler attempted to do a goto, or something weird like that.
4943 .ie n .IP "panic: unexpected constant lvalue entersub entry via type/targ %d:%d" 4
4944 .el .IP "panic: unexpected constant lvalue entersub entry via type/targ \f(CW%d:\fR%d" 4
4945 .IX Item "panic: unexpected constant lvalue entersub entry via type/targ %d:%d"
4946 (P) When compiling a subroutine call in lvalue context, Perl failed an
4947 internal consistency check. It encountered a malformed op tree.
4948 .ie n .IP "panic: unimplemented op %s (#%d) called" 4
4949 .el .IP "panic: unimplemented op \f(CW%s\fR (#%d) called" 4
4950 .IX Item "panic: unimplemented op %s (#%d) called"
4951 (P) The compiler is screwed up and attempted to use an op that isn't
4952 permitted at run time.
4953 .ie n .IP "panic: unknown OA_*: %x" 4
4954 .el .IP "panic: unknown OA_*: \f(CW%x\fR" 4
4955 .IX Item "panic: unknown OA_*: %x"
4956 (P) The internal routine that handles arguments to \f(CW&CORE::foo()\fR
4957 subroutine calls was unable to determine what type of arguments
4958 were expected.
4959 .IP "panic: utf16_to_utf8: odd bytelen" 4
4960 .IX Item "panic: utf16_to_utf8: odd bytelen"
4961 (P) Something tried to call utf16_to_utf8 with an odd (as opposed
4962 to even) byte length.
4963 .IP "panic: utf16_to_utf8_reversed: odd bytelen" 4
4964 .IX Item "panic: utf16_to_utf8_reversed: odd bytelen"
4965 (P) Something tried to call utf16_to_utf8_reversed with an odd (as opposed
4966 to even) byte length.
4967 .ie n .IP "panic: yylex, %s" 4
4968 .el .IP "panic: yylex, \f(CW%s\fR" 4
4969 .IX Item "panic: yylex, %s"
4970 (P) The lexer got into a bad state while processing a case modifier.
4971 .IP "Parentheses missing around ""%s"" list" 4
4972 .IX Item "Parentheses missing around ""%s"" list"
4973 (W parenthesis) You said something like
4974 .Sp
4975 .Vb 1
4976 \& my $foo, $bar = @_;
4977 .Ve
4978 .Sp
4979 when you meant
4980 .Sp
4981 .Vb 1
4982 \& my ($foo, $bar) = @_;
4983 .Ve
4984 .Sp
4985 Remember that "my", "our", "local" and "state" bind tighter than comma.
4986 .IP "Parsing code internal error (%s)" 4
4987 .IX Item "Parsing code internal error (%s)"
4988 (F) Parsing code supplied by an extension violated the parser's API in
4989 a detectable way.
4990 .IP "Pattern subroutine nesting without pos change exceeded limit in regex" 4
4991 .IX Item "Pattern subroutine nesting without pos change exceeded limit in regex"
4992 (F) You used a pattern that uses too many nested subpattern calls without
4993 consuming any text. Restructure the pattern so text is consumed before
4994 the nesting limit is exceeded.
4995 .ie n .IP """\-p"" destination: %s" 4
4996 .el .IP "\f(CW\-p\fR destination: \f(CW%s\fR" 4
4997 .IX Item "-p destination: %s"
4998 (F) An error occurred during the implicit output invoked by the \f(CW\*(C`\-p\*(C'\fR
4999 command-line switch. (This output goes to STDOUT unless you've
5000 redirected it with \fBselect()\fR.)
5001 .ie n .IP "Perl API version %s of %s does not match %s" 4
5002 .el .IP "Perl API version \f(CW%s\fR of \f(CW%s\fR does not match \f(CW%s\fR" 4
5003 .IX Item "Perl API version %s of %s does not match %s"
5004 (F) The XS module in question was compiled against a different incompatible
5005 version of Perl than the one that has loaded the XS module.
5006 .IP "Perl folding rules are not up-to-date for 0x%X; please use the perlbug utility to report; in regex; marked by <\-\-\ HERE in m/%s/" 4
5007 .IX Item "Perl folding rules are not up-to-date for 0x%X; please use the perlbug utility to report; in regex; marked by <--\ HERE in m/%s/"
5008 (S regexp) You used a regular expression with case-insensitive matching,
5009 and there is a bug in Perl in which the built-in regular expression
5010 folding rules are not accurate. This may lead to incorrect results.
5011 Please report this as a bug to <https://github.com/Perl/perl5/issues/new/choose>.
5012 .IP "Perl_my_%s() not available" 4
5013 .IX Item "Perl_my_%s() not available"
5014 (F) Your platform has very uncommon byte-order and integer size,
5015 so it was not possible to set up some or all fixed-width byte-order
5016 conversion functions. This is only a problem when you're using the
5017 \&'<' or '>' modifiers in (un)pack templates. See "pack" in perlfunc.
5018 .ie n .IP "Perl %s required (did you mean %s?)\-\-this is only %s, stopped" 4
5019 .el .IP "Perl \f(CW%s\fR required (did you mean \f(CW%s\fR?)\-\-this is only \f(CW%s\fR, stopped" 4
5020 .IX Item "Perl %s required (did you mean %s?)--this is only %s, stopped"
5021 (F) The code you are trying to run has asked for a newer version of
5022 Perl than you are running. Perhaps \f(CW\*(C`use 5.10\*(C'\fR was written instead
5023 of \f(CW\*(C`use 5.010\*(C'\fR or \f(CW\*(C`use v5.10\*(C'\fR. Without the leading \f(CW\*(C`v\*(C'\fR, the number is
5024 interpreted as a decimal, with every three digits after the
5025 decimal point representing a part of the version number. So 5.10
5026 is equivalent to v5.100.
5027 .ie n .IP "Perl %s required\-\-this is only %s, stopped" 4
5028 .el .IP "Perl \f(CW%s\fR required\-\-this is only \f(CW%s\fR, stopped" 4
5029 .IX Item "Perl %s required--this is only %s, stopped"
5030 (F) The module in question uses features of a version of Perl more
5031 recent than the currently running version. How long has it been since
5032 you upgraded, anyway? See "require" in perlfunc.
5033 .IP "PERL_SH_DIR too long" 4
5034 .IX Item "PERL_SH_DIR too long"
5035 (F) An error peculiar to OS/2. PERL_SH_DIR is the directory to find the
5036 \&\f(CW\*(C`sh\*(C'\fR\-shell in. See "PERL_SH_DIR" in perlos2.
5037 .IP "PERL_SIGNALS illegal: ""%s""" 4
5038 .IX Item "PERL_SIGNALS illegal: ""%s"""
5039 (X) See "PERL_SIGNALS" in perlrun for legal values.
5040 .ie n .IP "Perls since %s too modern\-\-this is %s, stopped" 4
5041 .el .IP "Perls since \f(CW%s\fR too modern\-\-this is \f(CW%s\fR, stopped" 4
5042 .IX Item "Perls since %s too modern--this is %s, stopped"
5043 (F) The code you are trying to run claims it will not run
5044 on the version of Perl you are using because it is too new.
5045 Maybe the code needs to be updated, or maybe it is simply
5046 wrong and the version check should just be removed.
5047 .IP "perl: warning: Non hex character in '$ENV{PERL_HASH_SEED}', seed only partially set" 4
5048 .IX Item "perl: warning: Non hex character in '$ENV{PERL_HASH_SEED}', seed only partially set"
5049 (S) PERL_HASH_SEED should match /^\es*(?:0x)?[0\-9a\-fA\-F]+\es*\ez/ but it
5050 contained a non hex character. This could mean you are not using the
5051 hash seed you think you are.
5052 .IP "perl: warning: Setting locale failed." 4
5053 .IX Item "perl: warning: Setting locale failed."
5054 (S) The whole warning message will look something like:
5055 .Sp
5056 .Vb 6
5057 \& perl: warning: Setting locale failed.
5058 \& perl: warning: Please check that your locale settings:
5059 \& LC_ALL = "En_US",
5060 \& LANG = (unset)
5061 \& are supported and installed on your system.
5062 \& perl: warning: Falling back to the standard locale ("C").
5063 .Ve
5064 .Sp
5065 Exactly what were the failed locale settings varies. In the above the
5066 settings were that the LC_ALL was "En_US" and the LANG had no value.
5067 This error means that Perl detected that you and/or your operating
5068 system supplier and/or system administrator have set up the so-called
5069 locale system but Perl could not use those settings. This was not
5070 dead serious, fortunately: there is a "default locale" called "C" that
5071 Perl can and will use, and the script will be run. Before you really
5072 fix the problem, however, you will get the same error message each
5073 time you run Perl. How to really fix the problem can be found in
5074 perllocale section \fBLOCALE PROBLEMS\fR.
5075 .IP "perl: warning: strange setting in '$ENV{PERL_PERTURB_KEYS}': '%s'" 4
5076 .IX Item "perl: warning: strange setting in '$ENV{PERL_PERTURB_KEYS}': '%s'"
5077 (S) Perl was run with the environment variable PERL_PERTURB_KEYS defined
5078 but containing an unexpected value. The legal values of this setting
5079 are as follows.
5080 .Sp
5081 .Vb 6
5082 \& Numeric | String | Result
5083 \& \-\-\-\-\-\-\-\-+\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-+\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-
5084 \& 0 | NO | Disables key traversal randomization
5085 \& 1 | RANDOM | Enables full key traversal randomization
5086 \& 2 | DETERMINISTIC | Enables repeatable key traversal
5087 \& | | randomization
5088 .Ve
5089 .Sp
5090 Both numeric and string values are accepted, but note that string values are
5091 case sensitive. The default for this setting is "RANDOM" or 1.
5092 .ie n .IP "pid %x not a child" 4
5093 .el .IP "pid \f(CW%x\fR not a child" 4
5094 .IX Item "pid %x not a child"
5095 (W exec) A warning peculiar to VMS. \fBWaitpid()\fR was asked to wait for a
5096 process which isn't a subprocess of the current process. While this is
5097 fine from VMS' perspective, it's probably not what you intended.
5098 .IP "'P' must have an explicit size in unpack" 4
5099 .IX Item "'P' must have an explicit size in unpack"
5100 (F) The unpack format P must have an explicit size, not "*".
5101 .IP "POSIX class [:%s:] unknown in regex; marked by <\-\-\ HERE in m/%s/" 4
5102 .IX Item "POSIX class [:%s:] unknown in regex; marked by <--\ HERE in m/%s/"
5103 (F) The class in the character class [: :] syntax is unknown. The <\-\-\ HERE
5104 shows whereabouts in the regular expression the problem was discovered.
5105 Note that the POSIX character classes do \fBnot\fR have the \f(CW\*(C`is\*(C'\fR prefix
5106 the corresponding C interfaces have: in other words, it's \f(CW\*(C`[[:print:]]\*(C'\fR,
5107 not \f(CW\*(C`isprint\*(C'\fR. See perlre.
5108 .IP "POSIX getpgrp can't take an argument" 4
5109 .IX Item "POSIX getpgrp can't take an argument"
5110 (F) Your system has POSIX \fBgetpgrp()\fR, which takes no argument, unlike
5111 the BSD version, which takes a pid.
5112 .ie n .IP "POSIX syntax [%c %c] belongs inside character classes%s in regex; marked by <\-\-\ HERE in m/%s/" 4
5113 .el .IP "POSIX syntax [%c \f(CW%c\fR] belongs inside character classes%s in regex; marked by <\-\-\ HERE in m/%s/" 4
5114 .IX Item "POSIX syntax [%c %c] belongs inside character classes%s in regex; marked by <--\ HERE in m/%s/"
5115 (W regexp) Perl thinks that you intended to write a POSIX character
5116 class, but didn't use enough brackets. These POSIX class constructs [:
5117 :], [= =], and [. .] go \fIinside\fR character classes, the [] are part of
5118 the construct, for example: \f(CW\*(C`qr/[012[:alpha:]345]/\*(C'\fR. What the regular
5119 expression pattern compiled to is probably not what you were intending.
5120 For example, \f(CW\*(C`qr/[:alpha:]/\*(C'\fR compiles to a regular bracketed character
5121 class consisting of the four characters \f(CW":"\fR, \f(CW"a"\fR, \f(CW"l"\fR,
5122 \&\f(CW"h"\fR, and \f(CW"p"\fR. To specify the POSIX class, it should have been
5123 written \f(CW\*(C`qr/[[:alpha:]]/\*(C'\fR.
5124 .Sp
5125 Note that [= =] and [. .] are not currently
5126 implemented; they are simply placeholders for future extensions and
5127 will cause fatal errors. The <\-\-\ HERE shows whereabouts in the regular
5128 expression the problem was discovered. See perlre.
5129 .Sp
5130 If the specification of the class was not completely valid, the message
5131 indicates that.
5132 .IP "POSIX syntax [. .] is reserved for future extensions in regex; marked by <\-\-\ HERE in m/%s/" 4
5133 .IX Item "POSIX syntax [. .] is reserved for future extensions in regex; marked by <--\ HERE in m/%s/"
5134 (F) Within regular expression character classes ([]) the syntax beginning
5135 with "[." and ending with ".]" is reserved for future extensions. If you
5136 need to represent those character sequences inside a regular expression
5137 character class, just quote the square brackets with the backslash: "\e[."
5138 and ".\e]". The <\-\-\ HERE shows whereabouts in the regular expression the
5139 problem was discovered. See perlre.
5140 .IP "POSIX syntax [= =] is reserved for future extensions in regex; marked by <\-\-\ HERE in m/%s/" 4
5141 .IX Item "POSIX syntax [= =] is reserved for future extensions in regex; marked by <--\ HERE in m/%s/"
5142 (F) Within regular expression character classes ([]) the syntax beginning
5143 with "[=" and ending with "=]" is reserved for future extensions. If you
5144 need to represent those character sequences inside a regular expression
5145 character class, just quote the square brackets with the backslash: "\e[="
5146 and "=\e]". The <\-\-\ HERE shows whereabouts in the regular expression the
5147 problem was discovered. See perlre.
5148 .IP "Possible attempt to put comments in \fBqw()\fR list" 4
5149 .IX Item "Possible attempt to put comments in qw() list"
5150 (W qw) \fBqw()\fR lists contain items separated by whitespace; as with literal
5151 strings, comment characters are not ignored, but are instead treated as
5152 literal data. (You may have used different delimiters than the
5153 parentheses shown here; braces are also frequently used.)
5154 .Sp
5155 You probably wrote something like this:
5156 .Sp
5157 .Vb 4
5158 \& @list = qw(
5159 \& a # a comment
5160 \& b # another comment
5161 \& );
5162 .Ve
5163 .Sp
5164 when you should have written this:
5165 .Sp
5166 .Vb 4
5167 \& @list = qw(
5168 \& a
5169 \& b
5170 \& );
5171 .Ve
5172 .Sp
5173 If you really want comments, build your list the
5174 old-fashioned way, with quotes and commas:
5175 .Sp
5176 .Vb 4
5177 \& @list = (
5178 \& \*(Aqa\*(Aq, # a comment
5179 \& \*(Aqb\*(Aq, # another comment
5180 \& );
5181 .Ve
5182 .IP "Possible attempt to separate words with commas" 4
5183 .IX Item "Possible attempt to separate words with commas"
5184 (W qw) \fBqw()\fR lists contain items separated by whitespace; therefore
5185 commas aren't needed to separate the items. (You may have used
5186 different delimiters than the parentheses shown here; braces are also
5187 frequently used.)
5188 .Sp
5189 You probably wrote something like this:
5190 .Sp
5191 .Vb 1
5192 \& qw! a, b, c !;
5193 .Ve
5194 .Sp
5195 which puts literal commas into some of the list items. Write it without
5196 commas if you don't want them to appear in your data:
5197 .Sp
5198 .Vb 1
5199 \& qw! a b c !;
5200 .Ve
5201 .ie n .IP "Possible memory corruption: %s overflowed 3rd argument" 4
5202 .el .IP "Possible memory corruption: \f(CW%s\fR overflowed 3rd argument" 4
5203 .IX Item "Possible memory corruption: %s overflowed 3rd argument"
5204 (F) An \fBioctl()\fR or \fBfcntl()\fR returned more than Perl was bargaining for.
5205 Perl guesses a reasonable buffer size, but puts a sentinel byte at the
5206 end of the buffer just in case. This sentinel byte got clobbered, and
5207 Perl assumes that memory is now corrupted. See "ioctl" in perlfunc.
5208 .IP "Possible precedence issue with control flow operator (%s)" 4
5209 .IX Item "Possible precedence issue with control flow operator (%s)"
5210 (W syntax) There is a possible problem with the mixing of a control
5211 flow operator (e.g. \f(CW\*(C`return\*(C'\fR) and a low-precedence operator like
5212 \&\f(CW\*(C`or\*(C'\fR. Consider:
5213 .Sp
5214 .Vb 1
5215 \& sub { return $x or $y; }
5216 .Ve
5217 .Sp
5218 This is parsed as:
5219 .Sp
5220 .Vb 1
5221 \& sub { (return $x) or $y; }
5222 .Ve
5223 .Sp
5224 Which is effectively just:
5225 .Sp
5226 .Vb 1
5227 \& sub { return $x; }
5228 .Ve
5229 .Sp
5230 Either use parentheses or the high-precedence variant of the operator.
5231 .Sp
5232 Note this may be also triggered for constructs like:
5233 .Sp
5234 .Vb 1
5235 \& sub { 1 if die; }
5236 .Ve
5237 .ie n .IP "Possible precedence problem on bitwise %s operator" 4
5238 .el .IP "Possible precedence problem on bitwise \f(CW%s\fR operator" 4
5239 .IX Item "Possible precedence problem on bitwise %s operator"
5240 (W precedence) Your program uses a bitwise logical operator in conjunction
5241 with a numeric comparison operator, like this :
5242 .Sp
5243 .Vb 1
5244 \& if ($x & $y == 0) { ... }
5245 .Ve
5246 .Sp
5247 This expression is actually equivalent to \f(CW\*(C`$x & ($y == 0)\*(C'\fR, due to the
5248 higher precedence of \f(CW\*(C`==\*(C'\fR. This is probably not what you want. (If you
5249 really meant to write this, disable the warning, or, better, put the
5250 parentheses explicitly and write \f(CW\*(C`$x & ($y == 0)\*(C'\fR).
5251 .IP "Possible unintended interpolation of $\e in regex" 4
5252 .IX Item "Possible unintended interpolation of $ in regex"
5253 (W ambiguous) You said something like \f(CW\*(C`m/$\e/\*(C'\fR in a regex.
5254 The regex \f(CW\*(C`m/foo$\es+bar/m\*(C'\fR translates to: match the word 'foo', the output
5255 record separator (see "$\e" in perlvar) and the letter 's' (one time or more)
5256 followed by the word 'bar'.
5257 .Sp
5258 If this is what you intended then you can silence the warning by using
5259 \&\f(CW\*(C`m/${\e}/\*(C'\fR (for example: \f(CW\*(C`m/foo${\e}s+bar/\*(C'\fR).
5260 .Sp
5261 If instead you intended to match the word 'foo' at the end of the line
5262 followed by whitespace and the word 'bar' on the next line then you can use
5263 \&\f(CW\*(C`m/$(?)\e/\*(C'\fR (for example: \f(CW\*(C`m/foo$(?)\es+bar/\*(C'\fR).
5264 .ie n .IP "Possible unintended interpolation of %s in string" 4
5265 .el .IP "Possible unintended interpolation of \f(CW%s\fR in string" 4
5266 .IX Item "Possible unintended interpolation of %s in string"
5267 (W ambiguous) You said something like '@foo' in a double-quoted string
5268 but there was no array \f(CW@foo\fR in scope at the time. If you wanted a
5269 literal \f(CW@foo\fR, then write it as \e@foo; otherwise find out what happened
5270 to the array you apparently lost track of.
5271 .ie n .IP "Precedence problem: open %s should be open(%s)" 4
5272 .el .IP "Precedence problem: open \f(CW%s\fR should be open(%s)" 4
5273 .IX Item "Precedence problem: open %s should be open(%s)"
5274 (S precedence) The old irregular construct
5275 .Sp
5276 .Vb 1
5277 \& open FOO || die;
5278 .Ve
5279 .Sp
5280 is now misinterpreted as
5281 .Sp
5282 .Vb 1
5283 \& open(FOO || die);
5284 .Ve
5285 .Sp
5286 because of the strict regularization of Perl 5's grammar into unary and
5287 list operators. (The old open was a little of both.) You must put
5288 parentheses around the filehandle, or use the new "or" operator instead
5289 of "||".
5290 .IP "Premature end of script headers" 4
5291 .IX Item "Premature end of script headers"
5292 See "500 Server error".
5293 .ie n .IP "\fBprintf()\fR on closed filehandle %s" 4
5294 .el .IP "\fBprintf()\fR on closed filehandle \f(CW%s\fR" 4
5295 .IX Item "printf() on closed filehandle %s"
5296 (W closed) The filehandle you're writing to got itself closed sometime
5297 before now. Check your control flow.
5298 .ie n .IP "\fBprint()\fR on closed filehandle %s" 4
5299 .el .IP "\fBprint()\fR on closed filehandle \f(CW%s\fR" 4
5300 .IX Item "print() on closed filehandle %s"
5301 (W closed) The filehandle you're printing on got itself closed sometime
5302 before now. Check your control flow.
5303 .IP "Process terminated by SIG%s" 4
5304 .IX Item "Process terminated by SIG%s"
5305 (W) This is a standard message issued by OS/2 applications, while *nix
5306 applications die in silence. It is considered a feature of the OS/2
5307 port. One can easily disable this by appropriate sighandlers, see
5308 "Signals" in perlipc. See also "Process terminated by SIGTERM/SIGINT"
5309 in perlos2.
5310 .ie n .IP "Prototype after '%c' for %s : %s" 4
5311 .el .IP "Prototype after '%c' for \f(CW%s\fR : \f(CW%s\fR" 4
5312 .IX Item "Prototype after '%c' for %s : %s"
5313 (W illegalproto) A character follows % or @ in a prototype. This is
5314 useless, since % and @ gobble the rest of the subroutine arguments.
5315 .ie n .IP "Prototype mismatch: %s vs %s" 4
5316 .el .IP "Prototype mismatch: \f(CW%s\fR vs \f(CW%s\fR" 4
5317 .IX Item "Prototype mismatch: %s vs %s"
5318 (S prototype) The subroutine being declared or defined had previously been
5319 declared or defined with a different function prototype.
5320 .IP "Prototype not terminated" 4
5321 .IX Item "Prototype not terminated"
5322 (F) You've omitted the closing parenthesis in a function prototype
5323 definition.
5324 .ie n .IP "Prototype '%s' overridden by attribute 'prototype(%s)' in %s" 4
5325 .el .IP "Prototype '%s' overridden by attribute 'prototype(%s)' in \f(CW%s\fR" 4
5326 .IX Item "Prototype '%s' overridden by attribute 'prototype(%s)' in %s"
5327 (W prototype) A prototype was declared in both the parentheses after
5328 the sub name and via the prototype attribute. The prototype in
5329 parentheses is useless, since it will be replaced by the prototype
5330 from the attribute before it's ever used.
5331 .ie n .IP "%s on BEGIN block ignored" 4
5332 .el .IP "\f(CW%s\fR on BEGIN block ignored" 4
5333 .IX Item "%s on BEGIN block ignored"
5334 (W syntax) \f(CW\*(C`BEGIN\*(C'\fR blocks are executed immediately after they are parsed
5335 and then thrown away. Any prototypes or attributes are therefore
5336 meaningless and are ignored. You should remove them from the \f(CW\*(C`BEGIN\*(C'\fR block.
5337 Note this also means you cannot create a constant called \f(CW\*(C`BEGIN\*(C'\fR.
5338 .IP "Quantifier follows nothing in regex; marked by <\-\-\ HERE in m/%s/" 4
5339 .IX Item "Quantifier follows nothing in regex; marked by <--\ HERE in m/%s/"
5340 (F) You started a regular expression with a quantifier. Backslash it if
5341 you meant it literally. The <\-\-\ HERE shows whereabouts in the regular
5342 expression the problem was discovered. See perlre.
5343 .ie n .IP "Quantifier in {,} bigger than %d in regex; marked by <\-\-\ HERE in m/%s/" 4
5344 .el .IP "Quantifier in {,} bigger than \f(CW%d\fR in regex; marked by <\-\-\ HERE in m/%s/" 4
5345 .IX Item "Quantifier in {,} bigger than %d in regex; marked by <--\ HERE in m/%s/"
5346 (F) There is currently a limit to the size of the min and max values of
5347 the {min,max} construct. The <\-\-\ HERE shows whereabouts in the regular
5348 expression the problem was discovered. See perlre.
5349 .IP "Quantifier {n,m} with n > m can't match in regex" 4
5350 .IX Item "Quantifier {n,m} with n > m can't match in regex"
5351 .PD 0
5352 .IP "Quantifier {n,m} with n > m can't match in regex; marked by <\-\-\ HERE in m/%s/" 4
5353 .IX Item "Quantifier {n,m} with n > m can't match in regex; marked by <--\ HERE in m/%s/"
5354 .PD
5355 (W regexp) Minima should be less than or equal to maxima. If you really
5356 want your regexp to match something 0 times, just put {0}.
5357 .IP "Quantifier unexpected on zero-length expression in regex m/%s/" 4
5358 .IX Item "Quantifier unexpected on zero-length expression in regex m/%s/"
5359 (W regexp) You applied a regular expression quantifier in a place where
5360 it makes no sense, such as on a zero-width assertion. Try putting the
5361 quantifier inside the assertion instead. For example, the way to match
5362 "abc" provided that it is followed by three repetitions of "xyz" is
5363 \&\f(CW\*(C`/abc(?=(?:xyz){3})/\*(C'\fR, not \f(CW\*(C`/abc(?=xyz){3}/\*(C'\fR.
5364 .IP "Range iterator outside integer range" 4
5365 .IX Item "Range iterator outside integer range"
5366 (F) One (or both) of the numeric arguments to the range operator ".."
5367 are outside the range which can be represented by integers internally.
5368 One possible workaround is to force Perl to use magical string increment
5369 by prepending "0" to your numbers.
5370 .IP "Ranges of ASCII printables should be some subset of ""0\-9"", ""A\-Z"", or ""a\-z"" in regex; marked by <\-\-\ HERE in m/%s/" 4
5371 .IX Item "Ranges of ASCII printables should be some subset of ""0-9"", ""A-Z"", or ""a-z"" in regex; marked by <--\ HERE in m/%s/"
5372 (W regexp) (only under \f(CW\*(C`use\ re\ \*(Aqstrict\*(Aq\*(C'\fR or within \f(CW\*(C`(?[...])\*(C'\fR)
5373 .Sp
5374 Stricter rules help to find typos and other errors. Perhaps you didn't
5375 even intend a range here, if the \f(CW"\-"\fR was meant to be some other
5376 character, or should have been escaped (like \f(CW"\e\-"\fR). If you did
5377 intend a range, the one that was used is not portable between ASCII and
5378 EBCDIC platforms, and doesn't have an obvious meaning to a casual
5379 reader.
5380 .Sp
5381 .Vb 7
5382 \& [3\-7] # OK; Obvious and portable
5383 \& [d\-g] # OK; Obvious and portable
5384 \& [A\-Y] # OK; Obvious and portable
5385 \& [A\-z] # WRONG; Not portable; not clear what is meant
5386 \& [a\-Z] # WRONG; Not portable; not clear what is meant
5387 \& [%\-.] # WRONG; Not portable; not clear what is meant
5388 \& [\ex41\-Z] # WRONG; Not portable; not obvious to non\-geek
5389 .Ve
5390 .Sp
5391 (You can force portability by specifying a Unicode range, which means that
5392 the endpoints are specified by
5393 \&\f(CW\*(C`\eN{...}\*(C'\fR, but the meaning may
5394 still not be obvious.)
5395 The stricter rules require that ranges that start or stop with an ASCII
5396 character that is not a control have all their endpoints be the literal
5397 character, and not some escape sequence (like \f(CW"\ex41"\fR), and the ranges
5398 must be all digits, or all uppercase letters, or all lowercase letters.
5399 .IP "Ranges of digits should be from the same group in regex; marked by <\-\-\ HERE in m/%s/" 4
5400 .IX Item "Ranges of digits should be from the same group in regex; marked by <--\ HERE in m/%s/"
5401 (W regexp) (only under \f(CW\*(C`use\ re\ \*(Aqstrict\*(Aq\*(C'\fR or within \f(CW\*(C`(?[...])\*(C'\fR)
5402 .Sp
5403 Stricter rules help to find typos and other errors. You included a
5404 range, and at least one of the end points is a decimal digit. Under the
5405 stricter rules, when this happens, both end points should be digits in
5406 the same group of 10 consecutive digits.
5407 .ie n .IP "\fBreaddir()\fR attempted on invalid dirhandle %s" 4
5408 .el .IP "\fBreaddir()\fR attempted on invalid dirhandle \f(CW%s\fR" 4
5409 .IX Item "readdir() attempted on invalid dirhandle %s"
5410 (W io) The dirhandle you're reading from is either closed or not really
5411 a dirhandle. Check your control flow.
5412 .ie n .IP "\fBreadline()\fR on closed filehandle %s" 4
5413 .el .IP "\fBreadline()\fR on closed filehandle \f(CW%s\fR" 4
5414 .IX Item "readline() on closed filehandle %s"
5415 (W closed) The filehandle you're reading from got itself closed sometime
5416 before now. Check your control flow.
5417 .ie n .IP "\fBreadline()\fR on unopened filehandle %s" 4
5418 .el .IP "\fBreadline()\fR on unopened filehandle \f(CW%s\fR" 4
5419 .IX Item "readline() on unopened filehandle %s"
5420 (W unopened) The filehandle you're reading from was never opened. Check your
5421 control flow.
5422 .ie n .IP "\fBread()\fR on closed filehandle %s" 4
5423 .el .IP "\fBread()\fR on closed filehandle \f(CW%s\fR" 4
5424 .IX Item "read() on closed filehandle %s"
5425 (W closed) You tried to read from a closed filehandle.
5426 .ie n .IP "\fBread()\fR on unopened filehandle %s" 4
5427 .el .IP "\fBread()\fR on unopened filehandle \f(CW%s\fR" 4
5428 .IX Item "read() on unopened filehandle %s"
5429 (W unopened) You tried to read from a filehandle that was never opened.
5430 .IP "\fBrealloc()\fR of freed memory ignored" 4
5431 .IX Item "realloc() of freed memory ignored"
5432 (S malloc) An internal routine called \fBrealloc()\fR on something that had
5433 already been freed.
5434 .IP "Recompile perl with \fB\-D\fRDEBUGGING to use \fB\-D\fR switch" 4
5435 .IX Item "Recompile perl with -DDEBUGGING to use -D switch"
5436 (S debugging) You can't use the \fB\-D\fR option unless the code to produce
5437 the desired output is compiled into Perl, which entails some overhead,
5438 which is why it's currently left out of your copy.
5439 .IP "Recursive call to Perl_load_module in PerlIO_find_layer" 4
5440 .IX Item "Recursive call to Perl_load_module in PerlIO_find_layer"
5441 (P) It is currently not permitted to load modules when creating
5442 a filehandle inside an \f(CW%INC\fR hook. This can happen with \f(CW\*(C`open my
5443 $fh, \*(Aq<\*(Aq, \e$scalar\*(C'\fR, which implicitly loads PerlIO::scalar. Try
5444 loading PerlIO::scalar explicitly first.
5445 .IP "Recursive inheritance detected in package '%s'" 4
5446 .IX Item "Recursive inheritance detected in package '%s'"
5447 (F) While calculating the method resolution order (MRO) of a package, Perl
5448 believes it found an infinite loop in the \f(CW@ISA\fR hierarchy. This is a
5449 crude check that bails out after 100 levels of \f(CW@ISA\fR depth.
5450 .ie n .IP "Redundant argument in %s" 4
5451 .el .IP "Redundant argument in \f(CW%s\fR" 4
5452 .IX Item "Redundant argument in %s"
5453 (W redundant) You called a function with more arguments than other
5454 arguments you supplied indicated would be needed. Currently only
5455 emitted when a printf-type format required fewer arguments than were
5456 supplied, but might be used in the future for e.g. "pack" in perlfunc.
5457 .ie n .IP "refcnt_dec: fd %d%s" 4
5458 .el .IP "refcnt_dec: fd \f(CW%d\fR%s" 4
5459 .IX Item "refcnt_dec: fd %d%s"
5460 .PD 0
5461 .ie n .IP "refcnt: fd %d%s" 4
5462 .el .IP "refcnt: fd \f(CW%d\fR%s" 4
5463 .IX Item "refcnt: fd %d%s"
5464 .ie n .IP "refcnt_inc: fd %d%s" 4
5465 .el .IP "refcnt_inc: fd \f(CW%d\fR%s" 4
5466 .IX Item "refcnt_inc: fd %d%s"
5467 .PD
5468 (P) Perl's I/O implementation failed an internal consistency check. If
5469 you see this message, something is very wrong.
5470 .IP "Reference found where even-sized list expected" 4
5471 .IX Item "Reference found where even-sized list expected"
5472 (W misc) You gave a single reference where Perl was expecting a list
5473 with an even number of elements (for assignment to a hash). This
5474 usually means that you used the anon hash constructor when you meant
5475 to use parens. In any case, a hash requires key/value \fBpairs\fR.
5476 .Sp
5477 .Vb 4
5478 \& %hash = { one => 1, two => 2, }; # WRONG
5479 \& %hash = [ qw/ an anon array / ]; # WRONG
5480 \& %hash = ( one => 1, two => 2, ); # right
5481 \& %hash = qw( one 1 two 2 ); # also fine
5482 .Ve
5483 .IP "Reference is already weak" 4
5484 .IX Item "Reference is already weak"
5485 (W misc) You have attempted to weaken a reference that is already weak.
5486 Doing so has no effect.
5487 .IP "Reference is not weak" 4
5488 .IX Item "Reference is not weak"
5489 (W misc) You have attempted to unweaken a reference that is not weak.
5490 Doing so has no effect.
5491 .IP "Reference to invalid group 0 in regex; marked by <\-\-\ HERE in m/%s/" 4
5492 .IX Item "Reference to invalid group 0 in regex; marked by <--\ HERE in m/%s/"
5493 (F) You used \f(CW\*(C`\eg0\*(C'\fR or similar in a regular expression. You may refer
5494 to capturing parentheses only with strictly positive integers
5495 (normal backreferences) or with strictly negative integers (relative
5496 backreferences). Using 0 does not make sense.
5497 .IP "Reference to nonexistent group in regex; marked by <\-\-\ HERE in m/%s/" 4
5498 .IX Item "Reference to nonexistent group in regex; marked by <--\ HERE in m/%s/"
5499 (F) You used something like \f(CW\*(C`\e7\*(C'\fR in your regular expression, but there are
5500 not at least seven sets of capturing parentheses in the expression. If
5501 you wanted to have the character with ordinal 7 inserted into the regular
5502 expression, prepend zeroes to make it three digits long: \f(CW\*(C`\e007\*(C'\fR
5503 .Sp
5504 The <\-\-\ HERE shows whereabouts in the regular expression the problem was
5505 discovered.
5506 .IP "Reference to nonexistent named group in regex; marked by <\-\-\ HERE in m/%s/" 4
5507 .IX Item "Reference to nonexistent named group in regex; marked by <--\ HERE in m/%s/"
5508 (F) You used something like \f(CW\*(C`\ek\*(AqNAME\*(Aq\*(C'\fR or \f(CW\*(C`\ek<NAME>\*(C'\fR in your regular
5509 expression, but there is no corresponding named capturing parentheses
5510 such as \f(CW\*(C`(?\*(AqNAME\*(Aq...)\*(C'\fR or \f(CW\*(C`(?<NAME>...)\*(C'\fR. Check if the name has been
5511 spelled correctly both in the backreference and the declaration.
5512 .Sp
5513 The <\-\-\ HERE shows whereabouts in the regular expression the problem was
5514 discovered.
5515 .IP "Reference to nonexistent or unclosed group in regex; marked by <\-\-\ HERE in m/%s/" 4
5516 .IX Item "Reference to nonexistent or unclosed group in regex; marked by <--\ HERE in m/%s/"
5517 (F) You used something like \f(CW\*(C`\eg{\-7}\*(C'\fR in your regular expression, but there
5518 are not at least seven sets of closed capturing parentheses in the
5519 expression before where the \f(CW\*(C`\eg{\-7}\*(C'\fR was located.
5520 .Sp
5521 The <\-\-\ HERE shows whereabouts in the regular expression the problem was
5522 discovered.
5523 .IP "regexp memory corruption" 4
5524 .IX Item "regexp memory corruption"
5525 (P) The regular expression engine got confused by what the regular
5526 expression compiler gave it.
5527 .IP "Regexp modifier ""/%c"" may appear a maximum of twice" 4
5528 .IX Item "Regexp modifier ""/%c"" may appear a maximum of twice"
5529 .PD 0
5530 .IP "Regexp modifier ""%c"" may appear a maximum of twice in regex; marked by <\-\-\ HERE in m/%s/" 4
5531 .IX Item "Regexp modifier ""%c"" may appear a maximum of twice in regex; marked by <--\ HERE in m/%s/"
5532 .PD
5533 (F) The regular expression pattern had too many occurrences
5534 of the specified modifier. Remove the extraneous ones.
5535 .IP "Regexp modifier ""%c"" may not appear after the ""\-"" in regex; marked by <\-\- HERE in m/%s/" 4
5536 .IX Item "Regexp modifier ""%c"" may not appear after the ""-"" in regex; marked by <-- HERE in m/%s/"
5537 (F) Turning off the given modifier has the side effect of turning on
5538 another one. Perl currently doesn't allow this. Reword the regular
5539 expression to use the modifier you want to turn on (and place it before
5540 the minus), instead of the one you want to turn off.
5541 .IP "Regexp modifier ""/%c"" may not appear twice" 4
5542 .IX Item "Regexp modifier ""/%c"" may not appear twice"
5543 .PD 0
5544 .IP "Regexp modifier ""%c"" may not appear twice in regex; marked by <\-\- HERE in m/%s/" 4
5545 .IX Item "Regexp modifier ""%c"" may not appear twice in regex; marked by <-- HERE in m/%s/"
5546 .PD
5547 (F) The regular expression pattern had too many occurrences
5548 of the specified modifier. Remove the extraneous ones.
5549 .IP "Regexp modifiers ""/%c"" and ""/%c"" are mutually exclusive" 4
5550 .IX Item "Regexp modifiers ""/%c"" and ""/%c"" are mutually exclusive"
5551 .PD 0
5552 .IP "Regexp modifiers ""%c"" and ""%c"" are mutually exclusive in regex; marked by <\-\-\ HERE in m/%s/" 4
5553 .IX Item "Regexp modifiers ""%c"" and ""%c"" are mutually exclusive in regex; marked by <--\ HERE in m/%s/"
5554 .PD
5555 (F) The regular expression pattern had more than one of these
5556 mutually exclusive modifiers. Retain only the modifier that is
5557 supposed to be there.
5558 .IP "Regexp out of space in regex m/%s/" 4
5559 .IX Item "Regexp out of space in regex m/%s/"
5560 (P) A "can't happen" error, because \fBsafemalloc()\fR should have caught it
5561 earlier.
5562 .IP "Repeated format line will never terminate (~~ and @#)" 4
5563 .IX Item "Repeated format line will never terminate (~~ and @#)"
5564 (F) Your format contains the ~~ repeat-until-blank sequence and a
5565 numeric field that will never go blank so that the repetition never
5566 terminates. You might use ^# instead. See perlform.
5567 .IP "Replacement list is longer than search list" 4
5568 .IX Item "Replacement list is longer than search list"
5569 (W misc) You have used a replacement list that is longer than the
5570 search list. So the additional elements in the replacement list
5571 are meaningless.
5572 .ie n .IP "Required parameter '%s' is missing for %s constructor" 4
5573 .el .IP "Required parameter '%s' is missing for \f(CW%s\fR constructor" 4
5574 .IX Item "Required parameter '%s' is missing for %s constructor"
5575 (F) You called the constructor for a class that has a required named
5576 parameter, but did not pass that parameter at all.
5577 .IP "'(*%s' requires a terminating ':' in regex; marked by <\-\- HERE in m/%s/" 4
5578 .IX Item "'(*%s' requires a terminating ':' in regex; marked by <-- HERE in m/%s/"
5579 (F) You used a construct that needs a colon and pattern argument.
5580 Supply these or check that you are using the right construct.
5581 .IP "'%s' resolved to '\eo{%s}%d'" 4
5582 .IX Item "'%s' resolved to 'o{%s}%d'"
5583 As of Perl 5.32, this message is no longer generated. Instead, see
5584 "Non-octal character '%c' terminates \eo early. Resolved as "%s"".
5585 (W misc, regexp) You wrote something like \f(CW\*(C`\e08\*(C'\fR, or \f(CW\*(C`\e179\*(C'\fR in a
5586 double-quotish string. All but the last digit is treated as a single
5587 character, specified in octal. The last digit is the next character in
5588 the string. To tell Perl that this is indeed what you want, you can use
5589 the \f(CW\*(C`\eo{ }\*(C'\fR syntax, or use exactly three digits to specify the octal
5590 for the character.
5591 .ie n .IP "Reversed %s= operator" 4
5592 .el .IP "Reversed \f(CW%s\fR= operator" 4
5593 .IX Item "Reversed %s= operator"
5594 (W syntax) You wrote your assignment operator backwards. The = must
5595 always come last, to avoid ambiguity with subsequent unary operators.
5596 .ie n .IP "\fBrewinddir()\fR attempted on invalid dirhandle %s" 4
5597 .el .IP "\fBrewinddir()\fR attempted on invalid dirhandle \f(CW%s\fR" 4
5598 .IX Item "rewinddir() attempted on invalid dirhandle %s"
5599 (W io) The dirhandle you tried to do a \fBrewinddir()\fR on is either closed
5600 or not really a dirhandle. Check your control flow.
5601 .ie n .IP "Scalars leaked: %d" 4
5602 .el .IP "Scalars leaked: \f(CW%d\fR" 4
5603 .IX Item "Scalars leaked: %d"
5604 (S internal) Something went wrong in Perl's internal bookkeeping
5605 of scalars: not all scalar variables were deallocated by the time
5606 Perl exited. What this usually indicates is a memory leak, which
5607 is of course bad, especially if the Perl program is intended to be
5608 long-running.
5609 .IP "Scalar value @%s[%s] better written as $%s[%s]" 4
5610 .IX Item "Scalar value @%s[%s] better written as $%s[%s]"
5611 (W syntax) You've used an array slice (indicated by @) to select a
5612 single element of an array. Generally it's better to ask for a scalar
5613 value (indicated by $). The difference is that \f(CW$foo[&bar]\fR always
5614 behaves like a scalar, both when assigning to it and when evaluating its
5615 argument, while \f(CW@foo[&bar]\fR behaves like a list when you assign to it,
5616 and provides a list context to its subscript, which can do weird things
5617 if you're expecting only one subscript.
5618 .Sp
5619 On the other hand, if you were actually hoping to treat the array
5620 element as a list, you need to look into how references work, because
5621 Perl will not magically convert between scalars and lists for you. See
5622 perlref.
5623 .IP "Scalar value @%s{%s} better written as $%s{%s}" 4
5624 .IX Item "Scalar value @%s{%s} better written as $%s{%s}"
5625 (W syntax) You've used a hash slice (indicated by @) to select a single
5626 element of a hash. Generally it's better to ask for a scalar value
5627 (indicated by $). The difference is that \f(CW$foo{&bar}\fR always behaves
5628 like a scalar, both when assigning to it and when evaluating its
5629 argument, while \f(CW@foo{&bar}\fR behaves like a list when you assign to it,
5630 and provides a list context to its subscript, which can do weird things
5631 if you're expecting only one subscript.
5632 .Sp
5633 On the other hand, if you were actually hoping to treat the hash element
5634 as a list, you need to look into how references work, because Perl will
5635 not magically convert between scalars and lists for you. See
5636 perlref.
5637 .IP "Search pattern not terminated" 4
5638 .IX Item "Search pattern not terminated"
5639 (F) The lexer couldn't find the final delimiter of a // or m{}
5640 construct. Remember that bracketing delimiters count nesting level.
5641 Missing the leading \f(CW\*(C`$\*(C'\fR from a variable \f(CW$m\fR may cause this error.
5642 .Sp
5643 Note that since Perl 5.10.0 a // can also be the \fIdefined-or\fR
5644 construct, not just the empty search pattern. Therefore code written
5645 in Perl 5.10.0 or later that uses the // as the \fIdefined-or\fR can be
5646 misparsed by pre\-5.10.0 Perls as a non-terminated search pattern.
5647 .ie n .IP "\fBseekdir()\fR attempted on invalid dirhandle %s" 4
5648 .el .IP "\fBseekdir()\fR attempted on invalid dirhandle \f(CW%s\fR" 4
5649 .IX Item "seekdir() attempted on invalid dirhandle %s"
5650 (W io) The dirhandle you are doing a \fBseekdir()\fR on is either closed or not
5651 really a dirhandle. Check your control flow.
5652 .IP "%\fBsseek()\fR on unopened filehandle" 4
5653 .IX Item "%sseek() on unopened filehandle"
5654 (W unopened) You tried to use the \fBseek()\fR or \fBsysseek()\fR function on a
5655 filehandle that was either never opened or has since been closed.
5656 .IP "select not implemented" 4
5657 .IX Item "select not implemented"
5658 (F) This machine doesn't implement the \fBselect()\fR system call.
5659 .IP "Self-ties of arrays and hashes are not supported" 4
5660 .IX Item "Self-ties of arrays and hashes are not supported"
5661 (F) Self-ties are of arrays and hashes are not supported in
5662 the current implementation.
5663 .IP "Semicolon seems to be missing" 4
5664 .IX Item "Semicolon seems to be missing"
5665 (W semicolon) A nearby syntax error was probably caused by a missing
5666 semicolon, or possibly some other missing operator, such as a comma.
5667 .IP "semi-panic: attempt to dup freed string" 4
5668 .IX Item "semi-panic: attempt to dup freed string"
5669 (S internal) The internal \fBnewSVsv()\fR routine was called to duplicate a
5670 scalar that had previously been marked as free.
5671 .IP "sem%s not implemented" 4
5672 .IX Item "sem%s not implemented"
5673 (F) You don't have System V semaphore IPC on your system.
5674 .ie n .IP "\fBsend()\fR on closed socket %s" 4
5675 .el .IP "\fBsend()\fR on closed socket \f(CW%s\fR" 4
5676 .IX Item "send() on closed socket %s"
5677 (W closed) The socket you're sending to got itself closed sometime
5678 before now. Check your control flow.
5679 .IP "Sequence ""\ec{"" invalid" 4
5680 .IX Item "Sequence ""c{"" invalid"
5681 (F) These three characters may not appear in sequence in a
5682 double-quotish context. This message is raised only on non-ASCII
5683 platforms (a different error message is output on ASCII ones). If you
5684 were intending to specify a control character with this sequence, you'll
5685 have to use a different way to specify it.
5686 .IP "Sequence (? incomplete in regex; marked by <\-\-\ HERE in m/%s/" 4
5687 .IX Item "Sequence (? incomplete in regex; marked by <--\ HERE in m/%s/"
5688 (F) A regular expression ended with an incomplete extension (?. The
5689 <\-\-\ HERE shows whereabouts in the regular expression the problem was
5690 discovered. See perlre.
5691 .IP "Sequence (?%c...) not implemented in regex; marked by <\-\-\ HERE in m/%s/" 4
5692 .IX Item "Sequence (?%c...) not implemented in regex; marked by <--\ HERE in m/%s/"
5693 (F) A proposed regular expression extension has the character reserved
5694 but has not yet been written. The <\-\-\ HERE shows whereabouts in the
5695 regular expression the problem was discovered. See perlre.
5696 .IP "Sequence (?%s...) not recognized in regex; marked by <\-\-\ HERE in m/%s/" 4
5697 .IX Item "Sequence (?%s...) not recognized in regex; marked by <--\ HERE in m/%s/"
5698 (F) You used a regular expression extension that doesn't make sense.
5699 The <\-\-\ HERE shows whereabouts in the regular expression the problem was
5700 discovered. This may happen when using the \f(CW\*(C`(?^...)\*(C'\fR construct to tell
5701 Perl to use the default regular expression modifiers, and you
5702 redundantly specify a default modifier. For other
5703 causes, see perlre.
5704 .IP "Sequence (?#... not terminated in regex m/%s/" 4
5705 .IX Item "Sequence (?#... not terminated in regex m/%s/"
5706 (F) A regular expression comment must be terminated by a closing
5707 parenthesis. Embedded parentheses aren't allowed. See
5708 perlre.
5709 .IP "Sequence (?&... not terminated in regex; marked by <\-\-\ HERE in m/%s/" 4
5710 .IX Item "Sequence (?&... not terminated in regex; marked by <--\ HERE in m/%s/"
5711 (F) A named reference of the form \f(CW\*(C`(?&...)\*(C'\fR was missing the final
5712 closing parenthesis after the name. The <\-\-\ HERE shows whereabouts
5713 in the regular expression the problem was discovered.
5714 .IP "Sequence (?%c... not terminated in regex; marked by <\-\-\ HERE in m/%s/" 4
5715 .IX Item "Sequence (?%c... not terminated in regex; marked by <--\ HERE in m/%s/"
5716 (F) A named group of the form \f(CW\*(C`(?\*(Aq...\*(Aq)\*(C'\fR or \f(CW\*(C`(?<...>)\*(C'\fR was missing the final
5717 closing quote or angle bracket. The <\-\-\ HERE shows whereabouts in the
5718 regular expression the problem was discovered.
5719 .IP "Sequence (%s... not terminated in regex; marked by <\-\-\ HERE in m/%s/" 4
5720 .IX Item "Sequence (%s... not terminated in regex; marked by <--\ HERE in m/%s/"
5721 (F) A lookahead assertion \f(CW\*(C`(?=...)\*(C'\fR or \f(CW\*(C`(?!...)\*(C'\fR or lookbehind
5722 assertion \f(CW\*(C`(?<=...)\*(C'\fR or \f(CW\*(C`(?<!...)\*(C'\fR was missing the final
5723 closing parenthesis. The <\-\-\ HERE shows whereabouts in the
5724 regular expression the problem was discovered.
5725 .IP "Sequence (?(%c... not terminated in regex; marked by <\-\-\ HERE in m/%s/" 4
5726 .IX Item "Sequence (?(%c... not terminated in regex; marked by <--\ HERE in m/%s/"
5727 (F) A named reference of the form \f(CW\*(C`(?(\*(Aq...\*(Aq)...)\*(C'\fR or \f(CW\*(C`(?(<...>)...)\*(C'\fR was
5728 missing the final closing quote or angle bracket after the name. The
5729 <\-\-\ HERE shows whereabouts in the regular expression the problem was
5730 discovered.
5731 .IP "Sequence (?... not terminated in regex; marked by <\-\-\ HERE in m/%s/" 4
5732 .IX Item "Sequence (?... not terminated in regex; marked by <--\ HERE in m/%s/"
5733 (F) There was no matching closing parenthesis for the '('. The
5734 <\-\-\ HERE shows whereabouts in the regular expression the problem was
5735 discovered.
5736 .IP "Sequence \e%s... not terminated in regex; marked by <\-\-\ HERE in m/%s/" 4
5737 .IX Item "Sequence %s... not terminated in regex; marked by <--\ HERE in m/%s/"
5738 (F) The regular expression expects a mandatory argument following the escape
5739 sequence and this has been omitted or incorrectly written.
5740 .IP "Sequence (?{...}) not terminated with ')'" 4
5741 .IX Item "Sequence (?{...}) not terminated with ')'"
5742 (F) The end of the perl code contained within the {...} must be
5743 followed immediately by a ')'.
5744 .IP "Sequence (?P>... not terminated in regex; marked by <\-\-\ HERE in m/%s/" 4
5745 .IX Item "Sequence (?P>... not terminated in regex; marked by <--\ HERE in m/%s/"
5746 (F) A named reference of the form \f(CW\*(C`(?P>...)\*(C'\fR was missing the final
5747 closing parenthesis after the name. The <\-\-\ HERE shows whereabouts
5748 in the regular expression the problem was discovered.
5749 .IP "Sequence (?P<... not terminated in regex; marked by <\-\-\ HERE in m/%s/" 4
5750 .IX Item "Sequence (?P<... not terminated in regex; marked by <--\ HERE in m/%s/"
5751 (F) A named group of the form \f(CW\*(C`(?P<...>\*(Aq)\*(C'\fR was missing the final
5752 closing angle bracket. The <\-\-\ HERE shows whereabouts in the
5753 regular expression the problem was discovered.
5754 .IP "Sequence ?P=... not terminated in regex; marked by <\-\-\ HERE in m/%s/" 4
5755 .IX Item "Sequence ?P=... not terminated in regex; marked by <--\ HERE in m/%s/"
5756 (F) A named reference of the form \f(CW\*(C`(?P=...)\*(C'\fR was missing the final
5757 closing parenthesis after the name. The <\-\-\ HERE shows whereabouts
5758 in the regular expression the problem was discovered.
5759 .IP "Sequence (?R) not terminated in regex m/%s/" 4
5760 .IX Item "Sequence (?R) not terminated in regex m/%s/"
5761 (F) An \f(CW\*(C`(?R)\*(C'\fR or \f(CW\*(C`(?0)\*(C'\fR sequence in a regular expression was missing the
5762 final parenthesis.
5763 .IP "500 Server error" 4
5764 .IX Item "500 Server error"
5765 (A) This is the error message generally seen in a browser window
5766 when trying to run a CGI program (including SSI) over the web. The
5767 actual error text varies widely from server to server. The most
5768 frequently-seen variants are "500 Server error", "Method (something)
5769 not permitted", "Document contains no data", "Premature end of script
5770 headers", and "Did not produce a valid header".
5771 .Sp
5772 \&\fBThis is a CGI error, not a Perl error\fR.
5773 .Sp
5774 You need to make sure your script is executable, is accessible by
5775 the user CGI is running the script under (which is probably not the
5776 user account you tested it under), does not rely on any environment
5777 variables (like PATH) from the user it isn't running under, and isn't
5778 in a location where the CGI server can't find it, basically, more or
5779 less. Please see the following for more information:
5780 .Sp
5781 .Vb 3
5782 \& https://www.perl.org/CGI_MetaFAQ.html
5783 \& http://www.htmlhelp.org/faq/cgifaq.html
5784 \& http://www.w3.org/Security/Faq/
5785 .Ve
5786 .Sp
5787 You should also look at perlfaq9.
5788 .IP "\fBsetegid()\fR not implemented" 4
5789 .IX Item "setegid() not implemented"
5790 (F) You tried to assign to \f(CW$)\fR, and your operating system doesn't
5791 support the \fBsetegid()\fR system call (or equivalent), or at least Configure
5792 didn't think so.
5793 .IP "\fBseteuid()\fR not implemented" 4
5794 .IX Item "seteuid() not implemented"
5795 (F) You tried to assign to \f(CW$>\fR, and your operating system doesn't
5796 support the \fBseteuid()\fR system call (or equivalent), or at least Configure
5797 didn't think so.
5798 .IP "setpgrp can't take arguments" 4
5799 .IX Item "setpgrp can't take arguments"
5800 (F) Your system has the \fBsetpgrp()\fR from BSD 4.2, which takes no
5801 arguments, unlike POSIX \fBsetpgid()\fR, which takes a process ID and process
5802 group ID.
5803 .IP "\fBsetrgid()\fR not implemented" 4
5804 .IX Item "setrgid() not implemented"
5805 (F) You tried to assign to \f(CW$(\fR, and your operating system doesn't
5806 support the \fBsetrgid()\fR system call (or equivalent), or at least Configure
5807 didn't think so.
5808 .IP "\fBsetruid()\fR not implemented" 4
5809 .IX Item "setruid() not implemented"
5810 (F) You tried to assign to \f(CW$<\fR, and your operating system doesn't
5811 support the \fBsetruid()\fR system call (or equivalent), or at least Configure
5812 didn't think so.
5813 .ie n .IP "\fBsetsockopt()\fR on closed socket %s" 4
5814 .el .IP "\fBsetsockopt()\fR on closed socket \f(CW%s\fR" 4
5815 .IX Item "setsockopt() on closed socket %s"
5816 (W closed) You tried to set a socket option on a closed socket. Did you
5817 forget to check the return value of your \fBsocket()\fR call? See
5818 "setsockopt" in perlfunc.
5819 .ie n .IP "Setting $/ to a reference to %s is forbidden" 4
5820 .el .IP "Setting $/ to a reference to \f(CW%s\fR is forbidden" 4
5821 .IX Item "Setting $/ to a reference to %s is forbidden"
5822 (F) You assigned a reference to a scalar to \f(CW$/\fR where the referenced item is
5823 not a positive integer. In older perls this \fBappeared\fR to work the same as
5824 setting it to \f(CW\*(C`undef\*(C'\fR but was in fact internally different, less efficient
5825 and with very bad luck could have resulted in your file being split by a
5826 stringified form of the reference.
5827 .Sp
5828 In Perl 5.20.0 this was changed so that it would be \fBexactly\fR the same as
5829 setting \f(CW$/\fR to undef, with the exception that this warning would be thrown.
5830 .Sp
5831 You are recommended to change your code to set \f(CW$/\fR to \f(CW\*(C`undef\*(C'\fR explicitly if
5832 you wish to slurp the file. As of Perl 5.28 assigning \f(CW$/\fR to a reference
5833 to an integer which isn't positive is a fatal error.
5834 .ie n .IP "Setting $/ to %s reference is forbidden" 4
5835 .el .IP "Setting $/ to \f(CW%s\fR reference is forbidden" 4
5836 .IX Item "Setting $/ to %s reference is forbidden"
5837 (F) You tried to assign a reference to a non integer to \f(CW$/\fR. In older
5838 Perls this would have behaved similarly to setting it to a reference to
5839 a positive integer, where the integer was the address of the reference.
5840 As of Perl 5.20.0 this is a fatal error, to allow future versions of Perl
5841 to use non-integer refs for more interesting purposes.
5842 .IP "shm%s not implemented" 4
5843 .IX Item "shm%s not implemented"
5844 (F) You don't have System V shared memory IPC on your system.
5845 .IP "!=~ should be !~" 4
5846 .IX Item "!=~ should be !~"
5847 (W syntax) The non-matching operator is !~, not !=~. !=~ will be
5848 interpreted as the != (numeric not equal) and ~ (1's complement)
5849 operators: probably not what you intended.
5850 .IP "/%s/ should probably be written as ""%s""" 4
5851 .IX Item "/%s/ should probably be written as ""%s"""
5852 (W syntax) You have used a pattern where Perl expected to find a string,
5853 as in the first argument to \f(CW\*(C`join\*(C'\fR. Perl will treat the true or false
5854 result of matching the pattern against \f(CW$_\fR as the string, which is
5855 probably not what you had in mind.
5856 .ie n .IP "\fBshutdown()\fR on closed socket %s" 4
5857 .el .IP "\fBshutdown()\fR on closed socket \f(CW%s\fR" 4
5858 .IX Item "shutdown() on closed socket %s"
5859 (W closed) You tried to do a shutdown on a closed socket. Seems a bit
5860 superfluous.
5861 .IP "SIG%s handler ""%s"" not defined" 4
5862 .IX Item "SIG%s handler ""%s"" not defined"
5863 (W signal) The signal handler named in \f(CW%SIG\fR doesn't, in fact, exist.
5864 Perhaps you put it into the wrong package?
5865 .ie n .IP "Slab leaked from cv %p" 4
5866 .el .IP "Slab leaked from cv \f(CW%p\fR" 4
5867 .IX Item "Slab leaked from cv %p"
5868 (S) If you see this message, then something is seriously wrong with the
5869 internal bookkeeping of op trees. An op tree needed to be freed after
5870 a compilation error, but could not be found, so it was leaked instead.
5871 .IP "sleep(%u) too large" 4
5872 .IX Item "sleep(%u) too large"
5873 (W overflow) You called \f(CW\*(C`sleep\*(C'\fR with a number that was larger than
5874 it can reliably handle and \f(CW\*(C`sleep\*(C'\fR probably slept for less time than
5875 requested.
5876 .IP "Slurpy parameter not last" 4
5877 .IX Item "Slurpy parameter not last"
5878 (F) In a subroutine signature, you put something after a slurpy (array or
5879 hash) parameter. The slurpy parameter takes all the available arguments,
5880 so there can't be any left to fill later parameters.
5881 .IP "Smart matching a non-overloaded object breaks encapsulation" 4
5882 .IX Item "Smart matching a non-overloaded object breaks encapsulation"
5883 (F) You should not use the \f(CW\*(C`~~\*(C'\fR operator on an object that does not
5884 overload it: Perl refuses to use the object's underlying structure
5885 for the smart match.
5886 .IP "Smartmatch is deprecated" 4
5887 .IX Item "Smartmatch is deprecated"
5888 (D deprecated::smartmatch) This warning is emitted if you
5889 use the smartmatch (\f(CW\*(C`~~\*(C'\fR) operator. This is a deprecated
5890 feature. Particularly, its behavior is noticed for being
5891 unnecessarily complex and unintuitive, and it will be removed
5892 in Perl 5.42.
5893 .IP "Sorry, hash keys must be smaller than 2**31 bytes" 4
5894 .IX Item "Sorry, hash keys must be smaller than 2**31 bytes"
5895 (F) You tried to create a hash containing a very large key, where "very
5896 large" means that it needs at least 2 gigabytes to store. Unfortunately,
5897 Perl doesn't yet handle such large hash keys. You should
5898 reconsider your design to avoid hashing such a long string directly.
5899 .IP "sort is now a reserved word" 4
5900 .IX Item "sort is now a reserved word"
5901 (F) An ancient error message that almost nobody ever runs into anymore.
5902 But before sort was a keyword, people sometimes used it as a filehandle.
5903 .IP "Source filters apply only to byte streams" 4
5904 .IX Item "Source filters apply only to byte streams"
5905 (F) You tried to activate a source filter (usually by loading a
5906 source filter module) within a string passed to \f(CW\*(C`eval\*(C'\fR. This is
5907 not permitted under the \f(CW\*(C`unicode_eval\*(C'\fR feature. Consider using
5908 \&\f(CW\*(C`evalbytes\*(C'\fR instead. See feature.
5909 .IP "\fBsplice()\fR offset past end of array" 4
5910 .IX Item "splice() offset past end of array"
5911 (W misc) You attempted to specify an offset that was past the end of
5912 the array passed to \fBsplice()\fR. Splicing will instead commence at the
5913 end of the array, rather than past it. If this isn't what you want,
5914 try explicitly pre-extending the array by assigning $#array = \f(CW$offset\fR.
5915 See "splice" in perlfunc.
5916 .IP "Split loop" 4
5917 .IX Item "Split loop"
5918 (P) The split was looping infinitely. (Obviously, a split shouldn't
5919 iterate more times than there are characters of input, which is what
5920 happened.) See "split" in perlfunc.
5921 .IP "Statement unlikely to be reached" 4
5922 .IX Item "Statement unlikely to be reached"
5923 (W exec) You did an \fBexec()\fR with some statement after it other than a
5924 \&\fBdie()\fR. This is almost always an error, because \fBexec()\fR never returns
5925 unless there was a failure. You probably wanted to use \fBsystem()\fR
5926 instead, which does return. To suppress this warning, put the \fBexec()\fR in
5927 a block by itself.
5928 .ie n .IP """state"" subroutine %s can't be in a package" 4
5929 .el .IP """state"" subroutine \f(CW%s\fR can't be in a package" 4
5930 .IX Item """state"" subroutine %s can't be in a package"
5931 (F) Lexically scoped subroutines aren't in a package, so it doesn't make
5932 sense to try to declare one with a package qualifier on the front.
5933 .ie n .IP """state %s"" used in sort comparison" 4
5934 .el .IP """state \f(CW%s\fR"" used in sort comparison" 4
5935 .IX Item """state %s"" used in sort comparison"
5936 (W syntax) The package variables \f(CW$a\fR and \f(CW$b\fR are used for sort comparisons.
5937 You used \f(CW$a\fR or \f(CW$b\fR in as an operand to the \f(CW\*(C`<=>\*(C'\fR or \f(CW\*(C`cmp\*(C'\fR operator inside a
5938 sort comparison block, and the variable had earlier been declared as a
5939 lexical variable. Either qualify the sort variable with the package
5940 name, or rename the lexical variable.
5941 .ie n .IP """state"" variable %s can't be in a package" 4
5942 .el .IP """state"" variable \f(CW%s\fR can't be in a package" 4
5943 .IX Item """state"" variable %s can't be in a package"
5944 (F) Lexically scoped variables aren't in a package, so it doesn't make
5945 sense to try to declare one with a package qualifier on the front. Use
5946 \&\fBlocal()\fR if you want to localize a package variable.
5947 .ie n .IP "\fBstat()\fR on unopened filehandle %s" 4
5948 .el .IP "\fBstat()\fR on unopened filehandle \f(CW%s\fR" 4
5949 .IX Item "stat() on unopened filehandle %s"
5950 (W unopened) You tried to use the \fBstat()\fR function on a filehandle that
5951 was either never opened or has since been closed.
5952 .IP "Strings with code points over 0xFF may not be mapped into in-memory file handles" 4
5953 .IX Item "Strings with code points over 0xFF may not be mapped into in-memory file handles"
5954 (W utf8) You tried to open a reference to a scalar for read or append
5955 where the scalar contained code points over 0xFF. In-memory files
5956 model on-disk files and can only contain bytes.
5957 .IP "Stub found while resolving method ""%s"" overloading ""%s"" in package ""%s""" 4
5958 .IX Item "Stub found while resolving method ""%s"" overloading ""%s"" in package ""%s"""
5959 (P) Overloading resolution over \f(CW@ISA\fR tree may be broken by importation
5960 stubs. Stubs should never be implicitly created, but explicit calls to
5961 \&\f(CW\*(C`can\*(C'\fR may break this.
5962 .IP "Subroutine attributes must come before the signature" 4
5963 .IX Item "Subroutine attributes must come before the signature"
5964 (F) When subroutine signatures are enabled, any subroutine attributes must
5965 come before the signature. Note that this order was the opposite in
5966 versions 5.22..5.26. So:
5967 .Sp
5968 .Vb 2
5969 \& sub foo :lvalue ($x, $y) { ... } # 5.20 and 5.28 +
5970 \& sub foo ($x, $y) :lvalue { ... } # 5.22 .. 5.26
5971 .Ve
5972 .IP "Subroutine ""&%s"" is not available" 4
5973 .IX Item "Subroutine ""&%s"" is not available"
5974 (W closure) During compilation, an inner named subroutine or eval is
5975 attempting to capture an outer lexical subroutine that is not currently
5976 available. This can happen for one of two reasons. First, the lexical
5977 subroutine may be declared in an outer anonymous subroutine that has
5978 not yet been created. (Remember that named subs are created at compile
5979 time, while anonymous subs are created at run-time.) For example,
5980 .Sp
5981 .Vb 1
5982 \& sub { my sub a {...} sub f { \e&a } }
5983 .Ve
5984 .Sp
5985 At the time that f is created, it can't capture the current "a" sub,
5986 since the anonymous subroutine hasn't been created yet. Conversely, the
5987 following won't give a warning since the anonymous subroutine has by now
5988 been created and is live:
5989 .Sp
5990 .Vb 1
5991 \& sub { my sub a {...} eval \*(Aqsub f { \e&a }\*(Aq }\->();
5992 .Ve
5993 .Sp
5994 The second situation is caused by an eval accessing a lexical subroutine
5995 that has gone out of scope, for example,
5996 .Sp
5997 .Vb 5
5998 \& sub f {
5999 \& my sub a {...}
6000 \& sub { eval \*(Aq\e&a\*(Aq }
6001 \& }
6002 \& f()\->();
6003 .Ve
6004 .Sp
6005 Here, when the '\e&a' in the eval is being compiled, f() is not currently
6006 being executed, so its &a is not available for capture.
6007 .ie n .IP """%s"" subroutine &%s masks earlier declaration in same %s" 4
6008 .el .IP """%s"" subroutine &%s masks earlier declaration in same \f(CW%s\fR" 4
6009 .IX Item """%s"" subroutine &%s masks earlier declaration in same %s"
6010 (W shadow) A "my" or "state" subroutine has been redeclared in the
6011 current scope or statement, effectively eliminating all access to
6012 the previous instance. This is almost always a typographical error.
6013 Note that the earlier subroutine will still exist until the end of
6014 the scope or until all closure references to it are destroyed.
6015 .ie n .IP "Subroutine %s redefined" 4
6016 .el .IP "Subroutine \f(CW%s\fR redefined" 4
6017 .IX Item "Subroutine %s redefined"
6018 (W redefine) You redefined a subroutine. To suppress this warning, say
6019 .Sp
6020 .Vb 4
6021 \& {
6022 \& no warnings \*(Aqredefine\*(Aq;
6023 \& eval "sub name { ... }";
6024 \& }
6025 .Ve
6026 .IP "Subroutine ""%s"" will not stay shared" 4
6027 .IX Item "Subroutine ""%s"" will not stay shared"
6028 (W closure) An inner (nested) \fInamed\fR subroutine is referencing a "my"
6029 subroutine defined in an outer named subroutine.
6030 .Sp
6031 When the inner subroutine is called, it will see the value of the outer
6032 subroutine's lexical subroutine as it was before and during the *first*
6033 call to the outer subroutine; in this case, after the first call to the
6034 outer subroutine is complete, the inner and outer subroutines will no
6035 longer share a common value for the lexical subroutine. In other words,
6036 it will no longer be shared. This will especially make a difference
6037 if the lexical subroutines accesses lexical variables declared in its
6038 surrounding scope.
6039 .Sp
6040 This problem can usually be solved by making the inner subroutine
6041 anonymous, using the \f(CW\*(C`sub {}\*(C'\fR syntax. When inner anonymous subs that
6042 reference lexical subroutines in outer subroutines are created, they
6043 are automatically rebound to the current values of such lexical subs.
6044 .IP "Substitution loop" 4
6045 .IX Item "Substitution loop"
6046 (P) The substitution was looping infinitely. (Obviously, a substitution
6047 shouldn't iterate more times than there are characters of input, which
6048 is what happened.) See the discussion of substitution in
6049 "Regexp Quote-Like Operators" in perlop.
6050 .IP "Substitution pattern not terminated" 4
6051 .IX Item "Substitution pattern not terminated"
6052 (F) The lexer couldn't find the interior delimiter of an s/// or s{}{}
6053 construct. Remember that bracketing delimiters count nesting level.
6054 Missing the leading \f(CW\*(C`$\*(C'\fR from variable \f(CW$s\fR may cause this error.
6055 .IP "Substitution replacement not terminated" 4
6056 .IX Item "Substitution replacement not terminated"
6057 (F) The lexer couldn't find the final delimiter of an s/// or s{}{}
6058 construct. Remember that bracketing delimiters count nesting level.
6059 Missing the leading \f(CW\*(C`$\*(C'\fR from variable \f(CW$s\fR may cause this error.
6060 .IP "substr outside of string" 4
6061 .IX Item "substr outside of string"
6062 (W substr)(F) You tried to reference a \fBsubstr()\fR that pointed outside of
6063 a string. That is, the absolute value of the offset was larger than the
6064 length of the string. See "substr" in perlfunc. This warning is fatal if
6065 substr is used in an lvalue context (as the left hand side of an
6066 assignment or as a subroutine argument for example).
6067 .ie n .IP "sv_upgrade from type %d down to type %d" 4
6068 .el .IP "sv_upgrade from type \f(CW%d\fR down to type \f(CW%d\fR" 4
6069 .IX Item "sv_upgrade from type %d down to type %d"
6070 (P) Perl tried to force the upgrade of an SV to a type which was actually
6071 inferior to its current type.
6072 .IP "Switch (?(condition)... contains too many branches in regex; marked by <\-\-\ HERE in m/%s/" 4
6073 .IX Item "Switch (?(condition)... contains too many branches in regex; marked by <--\ HERE in m/%s/"
6074 (F) A (?(condition)if\-clause|else\-clause) construct can have at most
6075 two branches (the if-clause and the else-clause). If you want one or
6076 both to contain alternation, such as using \f(CW\*(C`this|that|other\*(C'\fR, enclose
6077 it in clustering parentheses:
6078 .Sp
6079 .Vb 1
6080 \& (?(condition)(?:this|that|other)|else\-clause)
6081 .Ve
6082 .Sp
6083 The <\-\-\ HERE shows whereabouts in the regular expression the problem
6084 was discovered. See perlre.
6085 .IP "Switch condition not recognized in regex; marked by <\-\-\ HERE in m/%s/" 4
6086 .IX Item "Switch condition not recognized in regex; marked by <--\ HERE in m/%s/"
6087 (F) The condition part of a (?(condition)if\-clause|else\-clause) construct
6088 is not known. The condition must be one of the following:
6089 .Sp
6090 .Vb 9
6091 \& (1) (2) ... true if 1st, 2nd, etc., capture matched
6092 \& (<NAME>) (\*(AqNAME\*(Aq) true if named capture matched
6093 \& (?=...) (?<=...) true if subpattern matches
6094 \& (?!...) (?<!...) true if subpattern fails to match
6095 \& (?{ CODE }) true if code returns a true value
6096 \& (R) true if evaluating inside recursion
6097 \& (R1) (R2) ... true if directly inside capture group 1, 2, etc.
6098 \& (R&NAME) true if directly inside named capture
6099 \& (DEFINE) always false; for defining named subpatterns
6100 .Ve
6101 .Sp
6102 The <\-\-\ HERE shows whereabouts in the regular expression the problem was
6103 discovered. See perlre.
6104 .IP "Switch (?(condition)... not terminated in regex; marked by <\-\-\ HERE in m/%s/" 4
6105 .IX Item "Switch (?(condition)... not terminated in regex; marked by <--\ HERE in m/%s/"
6106 (F) You omitted to close a (?(condition)...) block somewhere
6107 in the pattern. Add a closing parenthesis in the appropriate
6108 position. See perlre.
6109 .ie n .IP "switching effective %s is not implemented" 4
6110 .el .IP "switching effective \f(CW%s\fR is not implemented" 4
6111 .IX Item "switching effective %s is not implemented"
6112 (F) While under the \f(CW\*(C`use filetest\*(C'\fR pragma, we cannot switch the real
6113 and effective uids or gids.
6114 .IP "syntax error" 4
6115 .IX Item "syntax error"
6116 (F) Probably means you had a syntax error. Common reasons include:
6117 .Sp
6118 .Vb 6
6119 \& A keyword is misspelled.
6120 \& A semicolon is missing.
6121 \& A comma is missing.
6122 \& An opening or closing parenthesis is missing.
6123 \& An opening or closing brace is missing.
6124 \& A closing quote is missing.
6125 .Ve
6126 .Sp
6127 Often there will be another error message associated with the syntax
6128 error giving more information. (Sometimes it helps to turn on \fB\-w\fR.)
6129 The error message itself often tells you where it was in the line when
6130 it decided to give up. Sometimes the actual error is several tokens
6131 before this, because Perl is good at understanding random input.
6132 Occasionally the line number may be misleading, and once in a blue moon
6133 the only way to figure out what's triggering the error is to call
6134 \&\f(CW\*(C`perl \-c\*(C'\fR repeatedly, chopping away half the program each time to see
6135 if the error went away. Sort of the cybernetic version of 20\ questions.
6136 .ie n .IP "syntax error at line %d: '%s' unexpected" 4
6137 .el .IP "syntax error at line \f(CW%d:\fR '%s' unexpected" 4
6138 .IX Item "syntax error at line %d: '%s' unexpected"
6139 (A) You've accidentally run your script through the Bourne shell instead
6140 of Perl. Check the #! line, or manually feed your script into Perl
6141 yourself.
6142 .ie n .IP "syntax error in file %s at line %d, next 2 tokens ""%s""" 4
6143 .el .IP "syntax error in file \f(CW%s\fR at line \f(CW%d\fR, next 2 tokens ""%s""" 4
6144 .IX Item "syntax error in file %s at line %d, next 2 tokens ""%s"""
6145 (F) This error is likely to occur if you run a perl5 script through
6146 a perl4 interpreter, especially if the next 2 tokens are "use strict"
6147 or "my \f(CW$var\fR" or "our \f(CW$var\fR".
6148 .IP "Syntax error in (?[...]) in regex; marked by <\-\- HERE in m/%s/" 4
6149 .IX Item "Syntax error in (?[...]) in regex; marked by <-- HERE in m/%s/"
6150 (F) Perl could not figure out what you meant inside this construct; this
6151 notifies you that it is giving up trying.
6152 .ie n .IP "%s syntax OK" 4
6153 .el .IP "\f(CW%s\fR syntax OK" 4
6154 .IX Item "%s syntax OK"
6155 (F) The final summary message when a \f(CW\*(C`perl \-c\*(C'\fR succeeds.
6156 .ie n .IP "\fBsysread()\fR on closed filehandle %s" 4
6157 .el .IP "\fBsysread()\fR on closed filehandle \f(CW%s\fR" 4
6158 .IX Item "sysread() on closed filehandle %s"
6159 (W closed) You tried to read from a closed filehandle.
6160 .ie n .IP "\fBsysread()\fR on unopened filehandle %s" 4
6161 .el .IP "\fBsysread()\fR on unopened filehandle \f(CW%s\fR" 4
6162 .IX Item "sysread() on unopened filehandle %s"
6163 (W unopened) You tried to read from a filehandle that was never opened.
6164 .ie n .IP "System V %s is not implemented on this machine" 4
6165 .el .IP "System V \f(CW%s\fR is not implemented on this machine" 4
6166 .IX Item "System V %s is not implemented on this machine"
6167 (F) You tried to do something with a function beginning with "sem",
6168 "shm", or "msg" but that System V IPC is not implemented in your
6169 machine. In some machines the functionality can exist but be
6170 unconfigured. Consult your system support.
6171 .ie n .IP "\fBsyswrite()\fR on closed filehandle %s" 4
6172 .el .IP "\fBsyswrite()\fR on closed filehandle \f(CW%s\fR" 4
6173 .IX Item "syswrite() on closed filehandle %s"
6174 (W closed) The filehandle you're writing to got itself closed sometime
6175 before now. Check your control flow.
6176 .ie n .IP """\-T"" and ""\-B"" not implemented on filehandles" 4
6177 .el .IP "\f(CW\-T\fR and \f(CW\-B\fR not implemented on filehandles" 4
6178 .IX Item "-T and -B not implemented on filehandles"
6179 (F) Perl can't peek at the stdio buffer of filehandles when it doesn't
6180 know about your kind of stdio. You'll have to use a filename instead.
6181 .IP "Target of goto is too deeply nested" 4
6182 .IX Item "Target of goto is too deeply nested"
6183 (F) You tried to use \f(CW\*(C`goto\*(C'\fR to reach a label that was too deeply nested
6184 for Perl to reach. Perl is doing you a favor by refusing.
6185 .ie n .IP "\fBtelldir()\fR attempted on invalid dirhandle %s" 4
6186 .el .IP "\fBtelldir()\fR attempted on invalid dirhandle \f(CW%s\fR" 4
6187 .IX Item "telldir() attempted on invalid dirhandle %s"
6188 (W io) The dirhandle you tried to \fBtelldir()\fR is either closed or not really
6189 a dirhandle. Check your control flow.
6190 .IP "\fBtell()\fR on unopened filehandle" 4
6191 .IX Item "tell() on unopened filehandle"
6192 (W unopened) You tried to use the \fBtell()\fR function on a filehandle that
6193 was either never opened or has since been closed.
6194 .IP "The \fBcrypt()\fR function is unimplemented due to excessive paranoia." 4
6195 .IX Item "The crypt() function is unimplemented due to excessive paranoia."
6196 (F) Configure couldn't find the \fBcrypt()\fR function on your machine,
6197 probably because your vendor didn't supply it, probably because they
6198 think the U.S. Government thinks it's a secret, or at least that they
6199 will continue to pretend that it is. And if you quote me on that, I
6200 will deny it.
6201 .IP "The experimental declared_refs feature is not enabled" 4
6202 .IX Item "The experimental declared_refs feature is not enabled"
6203 (F) To declare references to variables, as in \f(CW\*(C`my \e%x\*(C'\fR, you must first enable
6204 the feature:
6205 .Sp
6206 .Vb 2
6207 \& no warnings "experimental::declared_refs";
6208 \& use feature "declared_refs";
6209 .Ve
6210 .ie n .IP "The %s function is unimplemented" 4
6211 .el .IP "The \f(CW%s\fR function is unimplemented" 4
6212 .IX Item "The %s function is unimplemented"
6213 (F) The function indicated isn't implemented on this architecture,
6214 according to the probings of Configure.
6215 .IP "The private_use feature is experimental" 4
6216 .IX Item "The private_use feature is experimental"
6217 (S experimental::private_use) This feature is actually a hook for future
6218 use.
6219 .ie n .IP "The stat preceding %s wasn't an lstat" 4
6220 .el .IP "The stat preceding \f(CW%s\fR wasn't an lstat" 4
6221 .IX Item "The stat preceding %s wasn't an lstat"
6222 (F) It makes no sense to test the current stat buffer for symbolic
6223 linkhood if the last stat that wrote to the stat buffer already went
6224 past the symlink to get to the real file. Use an actual filename
6225 instead.
6226 .IP "The Unicode property wildcards feature is experimental" 4
6227 .IX Item "The Unicode property wildcards feature is experimental"
6228 (S experimental::uniprop_wildcards) This feature is experimental
6229 and its behavior may in any future release of perl. See
6230 "Wildcards in Property Values" in perlunicode.
6231 .IP "The 'unique' attribute may only be applied to 'our' variables" 4
6232 .IX Item "The 'unique' attribute may only be applied to 'our' variables"
6233 (F) This attribute was never supported on \f(CW\*(C`my\*(C'\fR or \f(CW\*(C`sub\*(C'\fR declarations.
6234 .IP "This Perl can't reset CRTL environ elements (%s)" 4
6235 .IX Item "This Perl can't reset CRTL environ elements (%s)"
6236 .PD 0
6237 .IP "This Perl can't set CRTL environ elements (%s=%s)" 4
6238 .IX Item "This Perl can't set CRTL environ elements (%s=%s)"
6239 .PD
6240 (W internal) Warnings peculiar to VMS. You tried to change or delete an
6241 element of the CRTL's internal environ array, but your copy of Perl
6242 wasn't built with a CRTL that contained the \fBsetenv()\fR function. You'll
6243 need to rebuild Perl with a CRTL that does, or redefine
6244 \&\fIPERL_ENV_TABLES\fR (see perlvms) so that the environ array isn't the
6245 target of the change to
6246 \&\f(CW%ENV\fR which produced the warning.
6247 .IP "This Perl has not been built with support for randomized hash key traversal but something called \fBPerl_hv_rand_set()\fR." 4
6248 .IX Item "This Perl has not been built with support for randomized hash key traversal but something called Perl_hv_rand_set()."
6249 (F) Something has attempted to use an internal API call which
6250 depends on Perl being compiled with the default support for randomized hash
6251 key traversal, but this Perl has been compiled without it. You should
6252 report this warning to the relevant upstream party, or recompile perl
6253 with default options.
6254 .IP "This use of \fBmy()\fR in false conditional is no longer allowed" 4
6255 .IX Item "This use of my() in false conditional is no longer allowed"
6256 (F) You used a declaration similar to \f(CW\*(C`my $x if 0\*(C'\fR. There
6257 has been a long-standing bug in Perl that causes a lexical variable
6258 not to be cleared at scope exit when its declaration includes a false
6259 conditional. Some people have exploited this bug to achieve a kind of
6260 static variable. Since we intend to fix this bug, we don't want people
6261 relying on this behavior. You can achieve a similar static effect by
6262 declaring the variable in a separate block outside the function, eg
6263 .Sp
6264 .Vb 1
6265 \& sub f { my $x if 0; return $x++ }
6266 .Ve
6267 .Sp
6268 becomes
6269 .Sp
6270 .Vb 1
6271 \& { my $x; sub f { return $x++ } }
6272 .Ve
6273 .Sp
6274 Beginning with perl 5.10.0, you can also use \f(CW\*(C`state\*(C'\fR variables to have
6275 lexicals that are initialized only once (see feature):
6276 .Sp
6277 .Vb 1
6278 \& sub f { state $x; return $x++ }
6279 .Ve
6280 .Sp
6281 This use of \f(CWmy()\fR in a false conditional was deprecated beginning in
6282 Perl 5.10 and became a fatal error in Perl 5.30.
6283 .IP "Timeout waiting for another thread to define \ep{%s}" 4
6284 .IX Item "Timeout waiting for another thread to define p{%s}"
6285 (F) The first time a user-defined property
6286 ("User-Defined Character Properties" in perlunicode) is used, its
6287 definition is looked up and converted into an internal form for more
6288 efficient handling in subsequent uses. There could be a race if two or
6289 more threads tried to do this processing nearly simultaneously.
6290 Instead, a critical section is created around this task, locking out all
6291 but one thread from doing it. This message indicates that the thread
6292 that is doing the conversion is taking an unexpectedly long time. The
6293 timeout exists solely to prevent deadlock; it's long enough that the
6294 system was likely thrashing and about to crash. There is no real remedy but
6295 rebooting.
6296 .IP "times not implemented" 4
6297 .IX Item "times not implemented"
6298 (F) Your version of the C library apparently doesn't do \fBtimes()\fR. I
6299 suspect you're not running on Unix.
6300 .IP """\-T"" is on the #! line, it must also be used on the command line" 4
6301 .IX Item """-T"" is on the #! line, it must also be used on the command line"
6302 (X) The #! line (or local equivalent) in a Perl script contains
6303 the \fB\-T\fR option (or the \fB\-t\fR option), but Perl was not invoked with
6304 \&\fB\-T\fR in its command line. This is an error because, by the time
6305 Perl discovers a \fB\-T\fR in a script, it's too late to properly taint
6306 everything from the environment. So Perl gives up.
6307 .Sp
6308 If the Perl script is being executed as a command using the #!
6309 mechanism (or its local equivalent), this error can usually be
6310 fixed by editing the #! line so that the \fB\-%c\fR option is a part of
6311 Perl's first argument: e.g. change \f(CW\*(C`perl \-n \-%c\*(C'\fR to \f(CW\*(C`perl \-%c \-n\*(C'\fR.
6312 .Sp
6313 If the Perl script is being executed as \f(CW\*(C`perl scriptname\*(C'\fR, then the
6314 \&\fB\-%c\fR option must appear on the command line: \f(CW\*(C`perl \-%c scriptname\*(C'\fR.
6315 .IP "To%s: illegal mapping '%s'" 4
6316 .IX Item "To%s: illegal mapping '%s'"
6317 (F) You tried to define a customized To-mapping for \fBlc()\fR, lcfirst,
6318 \&\fBuc()\fR, or \fBucfirst()\fR (or their string-inlined versions), but you
6319 specified an illegal mapping.
6320 See "User-Defined Character Properties" in perlunicode.
6321 .IP "Too deeply nested ()\-groups" 4
6322 .IX Item "Too deeply nested ()-groups"
6323 (F) Your template contains ()\-groups with a ridiculously deep nesting level.
6324 .IP "Too few args to syscall" 4
6325 .IX Item "Too few args to syscall"
6326 (F) There has to be at least one argument to \fBsyscall()\fR to specify the
6327 system call to call, silly dilly.
6328 .ie n .IP "Too few arguments for subroutine '%s' (got %d; expected %d)" 4
6329 .el .IP "Too few arguments for subroutine '%s' (got \f(CW%d\fR; expected \f(CW%d\fR)" 4
6330 .IX Item "Too few arguments for subroutine '%s' (got %d; expected %d)"
6331 (F) A subroutine using a signature fewer arguments than required by the
6332 signature. The caller of the subroutine is presumably at fault.
6333 .Sp
6334 The message attempts to include the name of the called subroutine. If
6335 the subroutine has been aliased, the subroutine's original name will be
6336 shown, regardless of what name the caller used. It will also indicate the
6337 number of arguments given and the number expected.
6338 .ie n .IP "Too few arguments for subroutine '%s' (got %d; expected at least %d)" 4
6339 .el .IP "Too few arguments for subroutine '%s' (got \f(CW%d\fR; expected at least \f(CW%d\fR)" 4
6340 .IX Item "Too few arguments for subroutine '%s' (got %d; expected at least %d)"
6341 Similar to the previous message but for subroutines that accept a variable
6342 number of arguments.
6343 .IP "Too late for ""\-%s"" option" 4
6344 .IX Item "Too late for ""-%s"" option"
6345 (X) The #! line (or local equivalent) in a Perl script contains the
6346 \&\fB\-M\fR, \fB\-m\fR or \fB\-C\fR option.
6347 .Sp
6348 In the case of \fB\-M\fR and \fB\-m\fR, this is an error because those options
6349 are not intended for use inside scripts. Use the \f(CW\*(C`use\*(C'\fR pragma instead.
6350 .Sp
6351 The \fB\-C\fR option only works if it is specified on the command line as
6352 well (with the same sequence of letters or numbers following). Either
6353 specify this option on the command line, or, if your system supports
6354 it, make your script executable and run it directly instead of passing
6355 it to perl.
6356 .ie n .IP "Too late to run %s block" 4
6357 .el .IP "Too late to run \f(CW%s\fR block" 4
6358 .IX Item "Too late to run %s block"
6359 (W void) A CHECK or INIT block is being defined during run time proper,
6360 when the opportunity to run them has already passed. Perhaps you are
6361 loading a file with \f(CW\*(C`require\*(C'\fR or \f(CW\*(C`do\*(C'\fR when you should be using \f(CW\*(C`use\*(C'\fR
6362 instead. Or perhaps you should put the \f(CW\*(C`require\*(C'\fR or \f(CW\*(C`do\*(C'\fR inside a
6363 BEGIN block.
6364 .IP "Too many args to syscall" 4
6365 .IX Item "Too many args to syscall"
6366 (F) Perl supports a maximum of only 14 args to \fBsyscall()\fR.
6367 .ie n .IP "Too many arguments for %s" 4
6368 .el .IP "Too many arguments for \f(CW%s\fR" 4
6369 .IX Item "Too many arguments for %s"
6370 (F) The function requires fewer arguments than you specified.
6371 .ie n .IP "Too many arguments for subroutine '%s' (got %d; expected %d)" 4
6372 .el .IP "Too many arguments for subroutine '%s' (got \f(CW%d\fR; expected \f(CW%d\fR)" 4
6373 .IX Item "Too many arguments for subroutine '%s' (got %d; expected %d)"
6374 (F) A subroutine using a signature received more arguments than permitted
6375 by the signature. The caller of the subroutine is presumably at fault.
6376 .Sp
6377 The message attempts to include the name of the called subroutine. If the
6378 subroutine has been aliased, the subroutine's original name will be shown,
6379 regardless of what name the caller used. It will also indicate the number
6380 of arguments given and the number expected.
6381 .ie n .IP "Too many arguments for subroutine '%s' (got %d; expected at most %d)" 4
6382 .el .IP "Too many arguments for subroutine '%s' (got \f(CW%d\fR; expected at most \f(CW%d\fR)" 4
6383 .IX Item "Too many arguments for subroutine '%s' (got %d; expected at most %d)"
6384 Similar to the previous message but for subroutines that accept a variable
6385 number of arguments.
6386 .IP "Too many nested open parens in regex; marked by <\-\- HERE in m/%s/" 4
6387 .IX Item "Too many nested open parens in regex; marked by <-- HERE in m/%s/"
6388 (F) You have exceeded the number of open \f(CW"("\fR parentheses that haven't
6389 been matched by corresponding closing ones. This limit prevents eating
6390 up too much memory. It is initially set to 1000, but may be changed by
6391 setting \f(CW\*(C`${^RE_COMPILE_RECURSION_LIMIT}\*(C'\fR to some other value. This may
6392 need to be done in a BEGIN block before the regular expression pattern
6393 is compiled.
6394 .ie n .IP "Too many nested BEGIN blocks, maximum of %d allowed" 4
6395 .el .IP "Too many nested BEGIN blocks, maximum of \f(CW%d\fR allowed" 4
6396 .IX Item "Too many nested BEGIN blocks, maximum of %d allowed"
6397 (F) You have executed code that nests too many BEGIN blocks inside of
6398 each other, either explicitly as BEGIN{} or implicitly as use statements.
6399 This limit defaults to a rather high number which should not be exceeded
6400 in normal circumstances, and triggering likely indicates something is
6401 very wrong in your code. For instance infinite recursion of eval and
6402 BEGIN blocks is known to trigger this error.
6403 .Sp
6404 If you know that you have good reason to exceed the limit you can change
6405 it by setting \f(CW\*(C`${^MAX_NESTED_EVAL_BEGIN_BLOCKS}\*(C'\fR to a different value from
6406 the default of 1000.
6407 .ie n .IP "Too many capture groups (limit is %d) in regex m/%s/" 4
6408 .el .IP "Too many capture groups (limit is \f(CW%d\fR) in regex m/%s/" 4
6409 .IX Item "Too many capture groups (limit is %d) in regex m/%s/"
6410 (F) You have too many capture groups in your regex pattern. You need to rework
6411 your pattern to use less capture groups.
6412 .IP "Too many )'s" 4
6413 .IX Item "Too many )'s"
6414 (A) You've accidentally run your script through \fBcsh\fR instead of Perl.
6415 Check the #! line, or manually feed your script into Perl yourself.
6416 .IP "Too many ('s" 4
6417 .IX Item "Too many ('s"
6418 (A) You've accidentally run your script through \fBcsh\fR instead of Perl.
6419 Check the #! line, or manually feed your script into Perl yourself.
6420 .IP "Trailing \e in regex m/%s/" 4
6421 .IX Item "Trailing in regex m/%s/"
6422 (F) The regular expression ends with an unbackslashed backslash.
6423 Backslash it. See perlre.
6424 .IP "Transliteration pattern not terminated" 4
6425 .IX Item "Transliteration pattern not terminated"
6426 (F) The lexer couldn't find the interior delimiter of a tr/// or tr[][]
6427 or y/// or y[][] construct. Missing the leading \f(CW\*(C`$\*(C'\fR from variables
6428 \&\f(CW$tr\fR or \f(CW$y\fR may cause this error.
6429 .IP "Transliteration replacement not terminated" 4
6430 .IX Item "Transliteration replacement not terminated"
6431 (F) The lexer couldn't find the final delimiter of a tr///, tr[][],
6432 y/// or y[][] construct.
6433 .ie n .IP "Treating %s::INIT block as BEGIN block as workaround" 4
6434 .el .IP "Treating \f(CW%s::INIT\fR block as BEGIN block as workaround" 4
6435 .IX Item "Treating %s::INIT block as BEGIN block as workaround"
6436 (S) A package is using an old version of \f(CW\*(C`Module::Install::DSL\*(C'\fR to
6437 install, which makes unsafe assumptions about when INIT blocks will be
6438 called. Because \f(CW\*(C`Module::Install::DSL\*(C'\fR is used to install other modules
6439 and is difficult to upgrade we have a special workaround in place to
6440 deal with this. Unless you are a maintainer of an affected module you
6441 can ignore this warning. We emit it only as a sanity check.
6442 .IP "'%s' trapped by operation mask" 4
6443 .IX Item "'%s' trapped by operation mask"
6444 (F) You tried to use an operator from a Safe compartment in which it's
6445 disallowed. See Safe.
6446 .IP "truncate not implemented" 4
6447 .IX Item "truncate not implemented"
6448 (F) Your machine doesn't implement a file truncation mechanism that
6449 Configure knows about.
6450 .IP "try/catch/finally is experimental" 4
6451 .IX Item "try/catch/finally is experimental"
6452 (S experimental::try) This warning is emitted if you use the \f(CW\*(C`try\*(C'\fR and
6453 \&\f(CW\*(C`catch\*(C'\fR syntax with a \f(CW\*(C`finally\*(C'\fR block. This syntax is currently experimental
6454 and its behaviour may change in future releases of Perl.
6455 .ie n .IP "Type of arg %d to &CORE::%s must be %s" 4
6456 .el .IP "Type of arg \f(CW%d\fR to &CORE::%s must be \f(CW%s\fR" 4
6457 .IX Item "Type of arg %d to &CORE::%s must be %s"
6458 (F) The subroutine in question in the CORE package requires its argument
6459 to be a hard reference to data of the specified type. Overloading is
6460 ignored, so a reference to an object that is not the specified type, but
6461 nonetheless has overloading to handle it, will still not be accepted.
6462 .ie n .IP "Type of arg %d to %s must be %s (not %s)" 4
6463 .el .IP "Type of arg \f(CW%d\fR to \f(CW%s\fR must be \f(CW%s\fR (not \f(CW%s\fR)" 4
6464 .IX Item "Type of arg %d to %s must be %s (not %s)"
6465 (F) This function requires the argument in that position to be of a
6466 certain type. Arrays must be \f(CW@NAME\fR or \f(CW\*(C`@{EXPR}\*(C'\fR. Hashes must be
6467 \&\f(CW%NAME\fR or \f(CW\*(C`%{EXPR}\*(C'\fR. No implicit dereferencing is allowed\-\-use the
6468 {EXPR} forms as an explicit dereference. See perlref.
6469 .IP "umask not implemented" 4
6470 .IX Item "umask not implemented"
6471 (F) Your machine doesn't implement the umask function and you tried to
6472 use it to restrict permissions for yourself (EXPR & 0700).
6473 .IP "UNIVERSAL does not export anything" 4
6474 .IX Item "UNIVERSAL does not export anything"
6475 (F) You asked UNIVERSAL to export something, but UNIVERSAL is the
6476 base class for all classes and contains no exportable symbols.
6477 .ie n .IP "Unbalanced context: %d more PUSHes than POPs" 4
6478 .el .IP "Unbalanced context: \f(CW%d\fR more PUSHes than POPs" 4
6479 .IX Item "Unbalanced context: %d more PUSHes than POPs"
6480 (S internal) The exit code detected an internal inconsistency in how
6481 many execution contexts were entered and left.
6482 .ie n .IP "Unbalanced saves: %d more saves than restores" 4
6483 .el .IP "Unbalanced saves: \f(CW%d\fR more saves than restores" 4
6484 .IX Item "Unbalanced saves: %d more saves than restores"
6485 (S internal) The exit code detected an internal inconsistency in how
6486 many values were temporarily localized.
6487 .ie n .IP "Unbalanced scopes: %d more ENTERs than LEAVEs" 4
6488 .el .IP "Unbalanced scopes: \f(CW%d\fR more ENTERs than LEAVEs" 4
6489 .IX Item "Unbalanced scopes: %d more ENTERs than LEAVEs"
6490 (S internal) The exit code detected an internal inconsistency in how
6491 many blocks were entered and left.
6492 .IP "Unbalanced string table refcount: (%d) for ""%s""" 4
6493 .IX Item "Unbalanced string table refcount: (%d) for ""%s"""
6494 (S internal) On exit, Perl found some strings remaining in the shared
6495 string table used for copy on write and for hash keys. The entries
6496 should have been freed, so this indicates a bug somewhere.
6497 .ie n .IP "Unbalanced tmps: %d more allocs than frees" 4
6498 .el .IP "Unbalanced tmps: \f(CW%d\fR more allocs than frees" 4
6499 .IX Item "Unbalanced tmps: %d more allocs than frees"
6500 (S internal) The exit code detected an internal inconsistency in how
6501 many mortal scalars were allocated and freed.
6502 .IP "Undefined format ""%s"" called" 4
6503 .IX Item "Undefined format ""%s"" called"
6504 (F) The format indicated doesn't seem to exist. Perhaps it's really in
6505 another package? See perlform.
6506 .IP "Undefined sort subroutine ""%s"" called" 4
6507 .IX Item "Undefined sort subroutine ""%s"" called"
6508 (F) The sort comparison routine specified doesn't seem to exist.
6509 Perhaps it's in a different package? See "sort" in perlfunc.
6510 .IP "Undefined subroutine &%s called" 4
6511 .IX Item "Undefined subroutine &%s called"
6512 (F) The subroutine indicated hasn't been defined, or if it was, it has
6513 since been undefined.
6514 .IP "Undefined subroutine called" 4
6515 .IX Item "Undefined subroutine called"
6516 (F) The anonymous subroutine you're trying to call hasn't been defined,
6517 or if it was, it has since been undefined.
6518 .IP "Undefined subroutine in sort" 4
6519 .IX Item "Undefined subroutine in sort"
6520 (F) The sort comparison routine specified is declared but doesn't seem
6521 to have been defined yet. See "sort" in perlfunc.
6522 .IP "Undefined top format ""%s"" called" 4
6523 .IX Item "Undefined top format ""%s"" called"
6524 (F) The format indicated doesn't seem to exist. Perhaps it's really in
6525 another package? See perlform.
6526 .IP "Undefined value assigned to typeglob" 4
6527 .IX Item "Undefined value assigned to typeglob"
6528 (W misc) An undefined value was assigned to a typeglob, a la
6529 \&\f(CW\*(C`*foo = undef\*(C'\fR. This does nothing. It's possible that you really mean
6530 \&\f(CW\*(C`undef *foo\*(C'\fR.
6531 .ie n .IP "%s: Undefined variable" 4
6532 .el .IP "\f(CW%s:\fR Undefined variable" 4
6533 .IX Item "%s: Undefined variable"
6534 (A) You've accidentally run your script through \fBcsh\fR instead of Perl.
6535 Check the #! line, or manually feed your script into Perl yourself.
6536 .IP "Unescaped left brace in regex is illegal here in regex; marked by <\-\-\ HERE in m/%s/" 4
6537 .IX Item "Unescaped left brace in regex is illegal here in regex; marked by <--\ HERE in m/%s/"
6538 (F) The simple rule to remember, if you want to
6539 match a literal \f(CW"{"\fR character (U+007B \f(CW\*(C`LEFT CURLY BRACKET\*(C'\fR) in a
6540 regular expression pattern, is to escape each literal instance of it in
6541 some way. Generally easiest is to precede it with a backslash, like
6542 \&\f(CW"\e{"\fR or enclose it in square brackets (\f(CW"[{]"\fR). If the pattern
6543 delimiters are also braces, any matching right brace (\f(CW"}"\fR) should
6544 also be escaped to avoid confusing the parser, for example,
6545 .Sp
6546 .Vb 1
6547 \& qr{abc\e{def\e}ghi}
6548 .Ve
6549 .Sp
6550 Forcing literal \f(CW"{"\fR characters to be escaped enables the Perl
6551 language to be extended in various ways in future releases. To avoid
6552 needlessly breaking existing code, the restriction is not enforced in
6553 contexts where there are unlikely to ever be extensions that could
6554 conflict with the use there of \f(CW"{"\fR as a literal. Those that are
6555 not potentially ambiguous do not warn; those that are do raise a
6556 non-deprecation warning.
6557 .Sp
6558 The contexts where no warnings or errors are raised are:
6559 .RS 4
6560 .IP \(bu 4
6561 as the first character in a pattern, or following \f(CW"^"\fR indicating to
6562 anchor the match to the beginning of a line.
6563 .IP \(bu 4
6564 as the first character following a \f(CW"|"\fR indicating alternation.
6565 .IP \(bu 4
6566 as the first character in a parenthesized grouping like
6567 .Sp
6568 .Vb 2
6569 \& /foo({bar)/
6570 \& /foo(?:{bar)/
6571 .Ve
6572 .IP \(bu 4
6573 as the first character following a quantifier
6574 .Sp
6575 .Vb 1
6576 \& /\es*{/
6577 .Ve
6578 .RE
6579 .RS 4
6580 .RE
6581 .IP "Unescaped left brace in regex is passed through in regex; marked by <\-\-\ HERE in m/%s/" 4
6582 .IX Item "Unescaped left brace in regex is passed through in regex; marked by <--\ HERE in m/%s/"
6583 (W regexp) The simple rule to remember, if you want to
6584 match a literal \f(CW"{"\fR character (U+007B \f(CW\*(C`LEFT CURLY BRACKET\*(C'\fR) in a
6585 regular expression pattern, is to escape each literal instance of it in
6586 some way. Generally easiest is to precede it with a backslash, like
6587 \&\f(CW"\e{"\fR or enclose it in square brackets (\f(CW"[{]"\fR). If the pattern
6588 delimiters are also braces, any matching right brace (\f(CW"}"\fR) should
6589 also be escaped to avoid confusing the parser, for example,
6590 .Sp
6591 .Vb 1
6592 \& qr{abc\e{def\e}ghi}
6593 .Ve
6594 .Sp
6595 Forcing literal \f(CW"{"\fR characters to be escaped enables the Perl
6596 language to be extended in various ways in future releases. To avoid
6597 needlessly breaking existing code, the restriction is not enforced in
6598 contexts where there are unlikely to ever be extensions that could
6599 conflict with the use there of \f(CW"{"\fR as a literal. Those that are
6600 not potentially ambiguous do not warn; those that are raise this
6601 warning. This makes sure that an inadvertent typo doesn't silently
6602 cause the pattern to compile to something unintended.
6603 .Sp
6604 The contexts where no warnings or errors are raised are:
6605 .RS 4
6606 .IP \(bu 4
6607 as the first character in a pattern, or following \f(CW"^"\fR indicating to
6608 anchor the match to the beginning of a line.
6609 .IP \(bu 4
6610 as the first character following a \f(CW"|"\fR indicating alternation.
6611 .IP \(bu 4
6612 as the first character in a parenthesized grouping like
6613 .Sp
6614 .Vb 2
6615 \& /foo({bar)/
6616 \& /foo(?:{bar)/
6617 .Ve
6618 .IP \(bu 4
6619 as the first character following a quantifier
6620 .Sp
6621 .Vb 1
6622 \& /\es*{/
6623 .Ve
6624 .RE
6625 .RS 4
6626 .RE
6627 .IP "Unescaped literal '%c' in regex; marked by <\-\- HERE in m/%s/" 4
6628 .IX Item "Unescaped literal '%c' in regex; marked by <-- HERE in m/%s/"
6629 (W regexp) (only under \f(CW\*(C`use\ re\ \*(Aqstrict\*(Aq\*(C'\fR)
6630 .Sp
6631 Within the scope of \f(CW\*(C`use\ re\ \*(Aqstrict\*(Aq\*(C'\fR in a regular expression
6632 pattern, you included an unescaped \f(CW\*(C`}\*(C'\fR or \f(CW\*(C`]\*(C'\fR which was interpreted
6633 literally. These two characters are sometimes metacharacters, and
6634 sometimes literals, depending on what precedes them in the
6635 pattern. This is unlike the similar \f(CW\*(C`)\*(C'\fR which is always a
6636 metacharacter unless escaped.
6637 .Sp
6638 This action at a distance, perhaps a large distance, can lead to Perl
6639 silently misinterpreting what you meant, so when you specify that you
6640 want extra checking by \f(CW\*(C`use\ re\ \*(Aqstrict\*(Aq\*(C'\fR, this warning is generated.
6641 If you meant the character as a literal, simply confirm that to Perl by
6642 preceding the character with a backslash, or make it into a bracketed
6643 character class (like \f(CW\*(C`[}]\*(C'\fR). If you meant it as closing a
6644 corresponding \f(CW\*(C`[\*(C'\fR or \f(CW\*(C`{\*(C'\fR, you'll need to look back through the pattern
6645 to find out why that isn't happening.
6646 .ie n .IP "unexec of %s into %s failed!" 4
6647 .el .IP "unexec of \f(CW%s\fR into \f(CW%s\fR failed!" 4
6648 .IX Item "unexec of %s into %s failed!"
6649 (F) The \fBunexec()\fR routine failed for some reason. See your local FSF
6650 representative, who probably put it there in the first place.
6651 .IP "Unexpected binary operator '%c' with no preceding operand in regex; marked by <\-\-\ HERE in m/%s/" 4
6652 .IX Item "Unexpected binary operator '%c' with no preceding operand in regex; marked by <--\ HERE in m/%s/"
6653 (F) You had something like this:
6654 .Sp
6655 .Vb 1
6656 \& (?[ | \ep{Digit} ])
6657 .Ve
6658 .Sp
6659 where the \f(CW"|"\fR is a binary operator with an operand on the right, but
6660 no operand on the left.
6661 .IP "Unexpected character in regex; marked by <\-\-\ HERE in m/%s/" 4
6662 .IX Item "Unexpected character in regex; marked by <--\ HERE in m/%s/"
6663 (F) You had something like this:
6664 .Sp
6665 .Vb 1
6666 \& (?[ z ])
6667 .Ve
6668 .Sp
6669 Within \f(CW\*(C`(?[ ])\*(C'\fR, no literal characters are allowed unless they are
6670 within an inner pair of square brackets, like
6671 .Sp
6672 .Vb 1
6673 \& (?[ [ z ] ])
6674 .Ve
6675 .Sp
6676 Another possibility is that you forgot a backslash. Perl isn't smart
6677 enough to figure out what you really meant.
6678 .ie n .IP "Unexpected characters while parsing class :isa attribute: %s" 4
6679 .el .IP "Unexpected characters while parsing class :isa attribute: \f(CW%s\fR" 4
6680 .IX Item "Unexpected characters while parsing class :isa attribute: %s"
6681 (F) You tried to specify something other than a single class name with an
6682 optional trailing verison number as the value for a \f(CW\*(C`class\*(C'\fR \f(CW\*(C`:isa\*(C'\fR
6683 attribute. This confused the parser.
6684 .ie n .IP "Unexpected exit %u" 4
6685 .el .IP "Unexpected exit \f(CW%u\fR" 4
6686 .IX Item "Unexpected exit %u"
6687 (S) \fBexit()\fR was called or the script otherwise finished gracefully when
6688 \&\f(CW\*(C`PERL_EXIT_WARN\*(C'\fR was set in \f(CW\*(C`PL_exit_flags\*(C'\fR.
6689 .ie n .IP "Unexpected exit failure %d" 4
6690 .el .IP "Unexpected exit failure \f(CW%d\fR" 4
6691 .IX Item "Unexpected exit failure %d"
6692 (S) An uncaught \fBdie()\fR was called when \f(CW\*(C`PERL_EXIT_WARN\*(C'\fR was set in
6693 \&\f(CW\*(C`PL_exit_flags\*(C'\fR.
6694 .IP "Unexpected ')' in regex; marked by <\-\-\ HERE in m/%s/" 4
6695 .IX Item "Unexpected ')' in regex; marked by <--\ HERE in m/%s/"
6696 (F) You had something like this:
6697 .Sp
6698 .Vb 1
6699 \& (?[ ( \ep{Digit} + ) ])
6700 .Ve
6701 .Sp
6702 The \f(CW")"\fR is out-of-place. Something apparently was supposed to
6703 be combined with the digits, or the \f(CW"+"\fR shouldn't be there, or
6704 something like that. Perl can't figure out what was intended.
6705 .IP "Unexpected ']' with no following ')' in (?[... in regex; marked by <\-\- HERE in m/%s/" 4
6706 .IX Item "Unexpected ']' with no following ')' in (?[... in regex; marked by <-- HERE in m/%s/"
6707 (F) While parsing an extended character class a ']' character was
6708 encountered at a point in the definition where the only legal use of
6709 \&']' is to close the character class definition as part of a '])', you
6710 may have forgotten the close paren, or otherwise confused the parser.
6711 .IP "Unexpected '(' with no preceding operator in regex; marked by <\-\-\ HERE in m/%s/" 4
6712 .IX Item "Unexpected '(' with no preceding operator in regex; marked by <--\ HERE in m/%s/"
6713 (F) You had something like this:
6714 .Sp
6715 .Vb 1
6716 \& (?[ \ep{Digit} ( \ep{Lao} + \ep{Thai} ) ])
6717 .Ve
6718 .Sp
6719 There should be an operator before the \f(CW"("\fR, as there's
6720 no indication as to how the digits are to be combined
6721 with the characters in the Lao and Thai scripts.
6722 .IP "Unicode non-character U+%X is not recommended for open interchange" 4
6723 .IX Item "Unicode non-character U+%X is not recommended for open interchange"
6724 (S nonchar) Certain codepoints, such as U+FFFE and U+FFFF, are
6725 defined by the Unicode standard to be non-characters. Those
6726 are legal codepoints, but are reserved for internal use; so,
6727 applications shouldn't attempt to exchange them. An application
6728 may not be expecting any of these characters at all, and receiving
6729 them may lead to bugs. If you know what you are doing you can
6730 turn off this warning by \f(CW\*(C`no warnings \*(Aqnonchar\*(Aq;\*(C'\fR.
6731 .Sp
6732 This is not really a "severe" error, but it is supposed to be
6733 raised by default even if warnings are not enabled, and currently
6734 the only way to do that in Perl is to mark it as serious.
6735 .IP "Unicode property wildcard not terminated" 4
6736 .IX Item "Unicode property wildcard not terminated"
6737 (F) A Unicode property wildcard looks like a delimited regular
6738 expression pattern (all within the braces of the enclosing \f(CW\*(C`\ep{...}\*(C'\fR.
6739 The closing delimtter to match the opening one was not found. If the
6740 opening one is escaped by preceding it with a backslash, the closing one
6741 must also be so escaped.
6742 .IP "Unicode string properties are not implemented in (?[...]) in regex; marked by <\-\- HERE in m/%s/" 4
6743 .IX Item "Unicode string properties are not implemented in (?[...]) in regex; marked by <-- HERE in m/%s/"
6744 (F) A Unicode string property is one which expands to a sequence of
6745 multiple characters. An example is \f(CW\*(C`\ep{name=KATAKANA LETTER AINU P}\*(C'\fR,
6746 which consists of the sequence \f(CW\*(C`\eN{KATAKANA LETTER SMALL H}\*(C'\fR
6747 followed by \f(CW\*(C`\eN{COMBINING KATAKANA\-HIRAGANA SEMI\-VOICED SOUND MARK}\*(C'\fR.
6748 Extended character classes, \f(CW\*(C`(?[...])\*(C'\fR currently cannot handle these.
6749 .IP "Unicode surrogate U+%X is illegal in UTF\-8" 4
6750 .IX Item "Unicode surrogate U+%X is illegal in UTF-8"
6751 (S surrogate) You had a UTF\-16 surrogate in a context where they are
6752 not considered acceptable. These code points, between U+D800 and
6753 U+DFFF (inclusive), are used by Unicode only for UTF\-16. However, Perl
6754 internally allows all unsigned integer code points (up to the size limit
6755 available on your platform), including surrogates. But these can cause
6756 problems when being input or output, which is likely where this message
6757 came from. If you really really know what you are doing you can turn
6758 off this warning by \f(CW\*(C`no warnings \*(Aqsurrogate\*(Aq;\*(C'\fR.
6759 .IP Unimplemented 4
6760 .IX Item "Unimplemented"
6761 (F) In Perl 5.12 and above, you have executed an
6762 ellipsis statement. This is a
6763 bare \f(CW\*(C`...;\*(C'\fR, meant to be used to allow you to outline code that
6764 is to be written, but is not complete, similar to the following:
6765 .Sp
6766 .Vb 4
6767 \& sub not_done_yet {
6768 \& my($self, $arg1, $arg2) = @_;
6769 \& ...
6770 \& }
6771 .Ve
6772 .Sp
6773 If \f(CWnot_done_yet()\fR is called, Perl will die with an \f(CW\*(C`Unimplemented\*(C'\fR error
6774 at the line containing \f(CW\*(C`...\*(C'\fR.
6775 .IP "Unknown charname '%s'" 4
6776 .IX Item "Unknown charname '%s'"
6777 (F) The name you used inside \f(CW\*(C`\eN{}\*(C'\fR is unknown to Perl. Check the
6778 spelling. You can say \f(CW\*(C`use charnames ":loose"\*(C'\fR to not have to be
6779 so precise about spaces, hyphens, and capitalization on standard Unicode
6780 names. (Any custom aliases that have been created must be specified
6781 exactly, regardless of whether \f(CW\*(C`:loose\*(C'\fR is used or not.) This error may
6782 also happen if the \f(CW\*(C`\eN{}\*(C'\fR is not in the scope of the corresponding
6783 \&\f(CW\*(C`use\ charnames\*(C'\fR.
6784 .IP "Unknown '(*...)' construct '%s' in regex; marked by <\-\- HERE in m/%s/" 4
6785 .IX Item "Unknown '(*...)' construct '%s' in regex; marked by <-- HERE in m/%s/"
6786 (F) The \f(CW\*(C`(*\*(C'\fR was followed by something that the regular expression
6787 compiler does not recognize. Check your spelling.
6788 .IP "Unknown error" 4
6789 .IX Item "Unknown error"
6790 (P) Perl was about to print an error message in \f(CW$@\fR, but the \f(CW$@\fR variable
6791 did not exist, even after an attempt to create it.
6792 .ie n .IP "Unknown locale category %d" 4
6793 .el .IP "Unknown locale category \f(CW%d\fR" 4
6794 .IX Item "Unknown locale category %d"
6795 .PD 0
6796 .ie n .IP "Unknown locale category %d; can't set it to %s" 4
6797 .el .IP "Unknown locale category \f(CW%d\fR; can't set it to \f(CW%s\fR" 4
6798 .IX Item "Unknown locale category %d; can't set it to %s"
6799 .PD
6800 (W locale) You used a locale category that perl doesn't recognize, so it
6801 cannot carry out your request. Check that you are using a valid
6802 category. If so, see "Multi-threaded" in perllocale for advice on
6803 reporting this as a bug, and for modifying perl locally to accommodate
6804 your needs.
6805 .IP "Unknown \fBopen()\fR mode '%s'" 4
6806 .IX Item "Unknown open() mode '%s'"
6807 (F) The second argument of 3\-argument \fBopen()\fR is not among the list
6808 of valid modes: \f(CW\*(C`<\*(C'\fR, \f(CW\*(C`>\*(C'\fR, \f(CW\*(C`>>\*(C'\fR, \f(CW\*(C`+<\*(C'\fR,
6809 \&\f(CW\*(C`+>\*(C'\fR, \f(CW\*(C`+>>\*(C'\fR, \f(CW\*(C`\-|\*(C'\fR, \f(CW\*(C`|\-\*(C'\fR, \f(CW\*(C`<&\*(C'\fR, \f(CW\*(C`>&\*(C'\fR.
6810 .IP "Unknown PerlIO layer ""%s""" 4
6811 .IX Item "Unknown PerlIO layer ""%s"""
6812 (W layer) An attempt was made to push an unknown layer onto the Perl I/O
6813 system. (Layers take care of transforming data between external and
6814 internal representations.) Note that some layers, such as \f(CW\*(C`mmap\*(C'\fR,
6815 are not supported in all environments. If your program didn't
6816 explicitly request the failing operation, it may be the result of the
6817 value of the environment variable PERLIO.
6818 .ie n .IP "Unknown process %x sent message to prime_env_iter: %s" 4
6819 .el .IP "Unknown process \f(CW%x\fR sent message to prime_env_iter: \f(CW%s\fR" 4
6820 .IX Item "Unknown process %x sent message to prime_env_iter: %s"
6821 (P) An error peculiar to VMS. Perl was reading values for \f(CW%ENV\fR before
6822 iterating over it, and someone else stuck a message in the stream of
6823 data Perl expected. Someone's very confused, or perhaps trying to
6824 subvert Perl's population of \f(CW%ENV\fR for nefarious purposes.
6825 .IP "Unknown regexp modifier ""/%s""" 4
6826 .IX Item "Unknown regexp modifier ""/%s"""
6827 (F) Alphanumerics immediately following the closing delimiter
6828 of a regular expression pattern are interpreted by Perl as modifier
6829 flags for the regex. One of the ones you specified is invalid. One way
6830 this can happen is if you didn't put in white space between the end of
6831 the regex and a following alphanumeric operator:
6832 .Sp
6833 .Vb 1
6834 \& if ($x =~ /foo/and $bar == 3) { ... }
6835 .Ve
6836 .Sp
6837 The \f(CW"a"\fR is a valid modifier flag, but the \f(CW"n"\fR is not, and raises
6838 this error. Likely what was meant instead was:
6839 .Sp
6840 .Vb 1
6841 \& if ($x =~ /foo/ and $bar == 3) { ... }
6842 .Ve
6843 .ie n .IP "Unknown ""re"" subpragma '%s' (known ones are: %s)" 4
6844 .el .IP "Unknown ""re"" subpragma '%s' (known ones are: \f(CW%s\fR)" 4
6845 .IX Item "Unknown ""re"" subpragma '%s' (known ones are: %s)"
6846 (W) You tried to use an unknown subpragma of the "re" pragma.
6847 .IP "Unknown switch condition (?(...)) in regex; marked by <\-\-\ HERE in m/%s/" 4
6848 .IX Item "Unknown switch condition (?(...)) in regex; marked by <--\ HERE in m/%s/"
6849 (F) The condition part of a (?(condition)if\-clause|else\-clause) construct
6850 is not known. The condition must be one of the following:
6851 .Sp
6852 .Vb 10
6853 \& (1) (2) ... true if 1st, 2nd, etc., capture matched
6854 \& (<NAME>) (\*(AqNAME\*(Aq) true if named capture matched
6855 \& (?=...) (?<=...) true if subpattern matches
6856 \& (*pla:...) (*plb:...) true if subpattern matches; also
6857 \& (*positive_lookahead:...)
6858 \& (*positive_lookbehind:...)
6859 \& (*nla:...) (*nlb:...) true if subpattern fails to match; also
6860 \& (*negative_lookahead:...)
6861 \& (*negative_lookbehind:...)
6862 \& (?{ CODE }) true if code returns a true value
6863 \& (R) true if evaluating inside recursion
6864 \& (R1) (R2) ... true if directly inside capture group 1, 2,
6865 \& etc.
6866 \& (R&NAME) true if directly inside named capture
6867 \& (DEFINE) always false; for defining named subpatterns
6868 .Ve
6869 .Sp
6870 The <\-\-\ HERE shows whereabouts in the regular expression the problem was
6871 discovered. See perlre.
6872 .IP "Unknown Unicode option letter '%c'" 4
6873 .IX Item "Unknown Unicode option letter '%c'"
6874 (F) You specified an unknown Unicode option. See
6875 perlrun documentation of the \f(CW\*(C`\-C\*(C'\fR switch
6876 for the list of known options.
6877 .ie n .IP "Unknown Unicode option value %d" 4
6878 .el .IP "Unknown Unicode option value \f(CW%d\fR" 4
6879 .IX Item "Unknown Unicode option value %d"
6880 (F) You specified an unknown Unicode option. See
6881 perlrun documentation of the \f(CW\*(C`\-C\*(C'\fR switch
6882 for the list of known options.
6883 .IP "Unknown user-defined property name \ep{%s}" 4
6884 .IX Item "Unknown user-defined property name p{%s}"
6885 (F) You specified to use a property within the \f(CW\*(C`\ep{...}\*(C'\fR which was a
6886 syntactically valid user-defined property, but no definition was found
6887 for it by the time one was required to proceed. Check your spelling.
6888 See "User-Defined Character Properties" in perlunicode.
6889 .IP "Unknown verb pattern '%s' in regex; marked by <\-\-\ HERE in m/%s/" 4
6890 .IX Item "Unknown verb pattern '%s' in regex; marked by <--\ HERE in m/%s/"
6891 (F) You either made a typo or have incorrectly put a \f(CW\*(C`*\*(C'\fR quantifier
6892 after an open brace in your pattern. Check the pattern and review
6893 perlre for details on legal verb patterns.
6894 .IP "Unknown warnings category '%s'" 4
6895 .IX Item "Unknown warnings category '%s'"
6896 (F) An error issued by the \f(CW\*(C`warnings\*(C'\fR pragma. You specified a warnings
6897 category that is unknown to perl at this point.
6898 .Sp
6899 Note that if you want to enable a warnings category registered by a
6900 module (e.g. \f(CW\*(C`use warnings \*(AqFile::Find\*(Aq\*(C'\fR), you must have loaded this
6901 module first.
6902 .IP "Unmatched [ in regex; marked by <\-\-\ HERE in m/%s/" 4
6903 .IX Item "Unmatched [ in regex; marked by <--\ HERE in m/%s/"
6904 (F) The brackets around a character class must match. If you wish to
6905 include a closing bracket in a character class, backslash it or put it
6906 first. The <\-\-\ HERE shows whereabouts in the regular expression the
6907 problem was discovered. See perlre.
6908 .IP "Unmatched ( in regex; marked by <\-\-\ HERE in m/%s/" 4
6909 .IX Item "Unmatched ( in regex; marked by <--\ HERE in m/%s/"
6910 .PD 0
6911 .IP "Unmatched ) in regex; marked by <\-\-\ HERE in m/%s/" 4
6912 .IX Item "Unmatched ) in regex; marked by <--\ HERE in m/%s/"
6913 .PD
6914 (F) Unbackslashed parentheses must always be balanced in regular
6915 expressions. If you're a vi user, the % key is valuable for finding
6916 the matching parenthesis. The <\-\-\ HERE shows whereabouts in the
6917 regular expression the problem was discovered. See perlre.
6918 .ie n .IP "Unmatched right %s bracket" 4
6919 .el .IP "Unmatched right \f(CW%s\fR bracket" 4
6920 .IX Item "Unmatched right %s bracket"
6921 (F) The lexer counted more closing curly or square brackets than opening
6922 ones, so you're probably missing a matching opening bracket. As a
6923 general rule, you'll find the missing one (so to speak) near the place
6924 you were last editing.
6925 .IP "Unquoted string ""%s"" may clash with future reserved word" 4
6926 .IX Item "Unquoted string ""%s"" may clash with future reserved word"
6927 (W reserved) You used a bareword that might someday be claimed as a
6928 reserved word. It's best to put such a word in quotes, or capitalize it
6929 somehow, or insert an underbar into it. You might also declare it as a
6930 subroutine.
6931 .ie n .IP "Unrecognized character %s; marked by <\-\-\ HERE after %s near column %d" 4
6932 .el .IP "Unrecognized character \f(CW%s\fR; marked by <\-\-\ HERE after \f(CW%s\fR near column \f(CW%d\fR" 4
6933 .IX Item "Unrecognized character %s; marked by <--\ HERE after %s near column %d"
6934 (F) The Perl parser has no idea what to do with the specified character
6935 in your Perl script (or eval) near the specified column. Perhaps you
6936 tried to run a compressed script, a binary program, or a directory as
6937 a Perl program.
6938 .ie n .IP "Unrecognized class attribute %s" 4
6939 .el .IP "Unrecognized class attribute \f(CW%s\fR" 4
6940 .IX Item "Unrecognized class attribute %s"
6941 (F) You attempted to add a named attribute to a \f(CW\*(C`class\*(C'\fR definition, but
6942 perl does not recognise the name of the requested attribute.
6943 .IP "Unrecognized escape \e%c in character class in regex; marked by <\-\-\ HERE in m/%s/" 4
6944 .IX Item "Unrecognized escape %c in character class in regex; marked by <--\ HERE in m/%s/"
6945 (F) You used a backslash-character combination which is not
6946 recognized by Perl inside character classes. This is a fatal
6947 error when the character class is used within \f(CW\*(C`(?[ ])\*(C'\fR.
6948 .IP "Unrecognized escape \e%c in character class passed through in regex; marked by <\-\-\ HERE in m/%s/" 4
6949 .IX Item "Unrecognized escape %c in character class passed through in regex; marked by <--\ HERE in m/%s/"
6950 (W regexp) You used a backslash-character combination which is not
6951 recognized by Perl inside character classes. The character was
6952 understood literally, but this may change in a future version of Perl.
6953 The <\-\-\ HERE shows whereabouts in the regular expression the
6954 escape was discovered.
6955 .IP "Unrecognized escape \e%c passed through" 4
6956 .IX Item "Unrecognized escape %c passed through"
6957 (W misc) You used a backslash-character combination which is not
6958 recognized by Perl. The character was understood literally, but this may
6959 change in a future version of Perl.
6960 .IP "Unrecognized escape \e%s passed through in regex; marked by <\-\-\ HERE in m/%s/" 4
6961 .IX Item "Unrecognized escape %s passed through in regex; marked by <--\ HERE in m/%s/"
6962 (W regexp) You used a backslash-character combination which is not
6963 recognized by Perl. The character(s) were understood literally, but
6964 this may change in a future version of Perl. The <\-\-\ HERE shows
6965 whereabouts in the regular expression the escape was discovered.
6966 .ie n .IP "Unrecognized field attribute %s" 4
6967 .el .IP "Unrecognized field attribute \f(CW%s\fR" 4
6968 .IX Item "Unrecognized field attribute %s"
6969 (F) You attempted to add a named attribute to a \f(CW\*(C`field\*(C'\fR definition, but
6970 perl does not recognise the name of the requested attribute.
6971 .ie n .IP "Unrecognised parameters for ""%s"" constructor: %s" 4
6972 .el .IP "Unrecognised parameters for ""%s"" constructor: \f(CW%s\fR" 4
6973 .IX Item "Unrecognised parameters for ""%s"" constructor: %s"
6974 (F) You called new on a class but supplied a parameter name that
6975 didn't match a class field name.
6976 .IP "Unrecognized signal name ""%s""" 4
6977 .IX Item "Unrecognized signal name ""%s"""
6978 (F) You specified a signal name to the \fBkill()\fR function that was not
6979 recognized. Say \f(CW\*(C`kill \-l\*(C'\fR in your shell to see the valid signal names
6980 on your system.
6981 .IP "Unrecognized switch: \-%s (\-h will show valid options)" 4
6982 .IX Item "Unrecognized switch: -%s (-h will show valid options)"
6983 (F) You specified an illegal option to Perl. Don't do that. (If you
6984 think you didn't do that, check the #! line to see if it's supplying the
6985 bad switch on your behalf.)
6986 .ie n .IP "Unsuccessful %s on filename containing newline" 4
6987 .el .IP "Unsuccessful \f(CW%s\fR on filename containing newline" 4
6988 .IX Item "Unsuccessful %s on filename containing newline"
6989 (W newline) A file operation was attempted on a filename, and that
6990 operation failed, PROBABLY because the filename contained a newline,
6991 PROBABLY because you forgot to \fBchomp()\fR it off. See "chomp" in perlfunc.
6992 .IP "Unsupported directory function ""%s"" called" 4
6993 .IX Item "Unsupported directory function ""%s"" called"
6994 (F) Your machine doesn't support \fBopendir()\fR and \fBreaddir()\fR.
6995 .ie n .IP "Unsupported function %s" 4
6996 .el .IP "Unsupported function \f(CW%s\fR" 4
6997 .IX Item "Unsupported function %s"
6998 (F) This machine doesn't implement the indicated function, apparently.
6999 At least, Configure doesn't think so.
7000 .IP "Unsupported function fork" 4
7001 .IX Item "Unsupported function fork"
7002 (F) Your version of executable does not support forking.
7003 .Sp
7004 Note that under some systems, like OS/2, there may be different flavors
7005 of Perl executables, some of which may support fork, some not. Try
7006 changing the name you call Perl by to \f(CW\*(C`perl_\*(C'\fR, \f(CW\*(C`perl_\|_\*(C'\fR, and so on.
7007 .ie n .IP "Unsupported script encoding %s" 4
7008 .el .IP "Unsupported script encoding \f(CW%s\fR" 4
7009 .IX Item "Unsupported script encoding %s"
7010 (F) Your program file begins with a Unicode Byte Order Mark (BOM) which
7011 declares it to be in a Unicode encoding that Perl cannot read.
7012 .IP "Unsupported socket function ""%s"" called" 4
7013 .IX Item "Unsupported socket function ""%s"" called"
7014 (F) Your machine doesn't support the Berkeley socket mechanism, or at
7015 least that's what Configure thought.
7016 .IP "Unterminated '(*...' argument in regex; marked by <\-\- HERE in m/%s/" 4
7017 .IX Item "Unterminated '(*...' argument in regex; marked by <-- HERE in m/%s/"
7018 (F) You used a pattern of the form \f(CW\*(C`(*...:...)\*(C'\fR but did not terminate
7019 the pattern with a \f(CW\*(C`)\*(C'\fR. Fix the pattern and retry.
7020 .IP "Unterminated attribute list" 4
7021 .IX Item "Unterminated attribute list"
7022 (F) The lexer found something other than a simple identifier at the
7023 start of an attribute, and it wasn't a semicolon or the start of a
7024 block. Perhaps you terminated the parameter list of the previous
7025 attribute too soon. See attributes.
7026 .IP "Unterminated attribute parameter in attribute list" 4
7027 .IX Item "Unterminated attribute parameter in attribute list"
7028 (F) The lexer saw an opening (left) parenthesis character while parsing
7029 an attribute list, but the matching closing (right) parenthesis
7030 character was not found. You may need to add (or remove) a backslash
7031 character to get your parentheses to balance. See attributes.
7032 .IP "Unterminated compressed integer" 4
7033 .IX Item "Unterminated compressed integer"
7034 (F) An argument to unpack("w",...) was incompatible with the BER
7035 compressed integer format and could not be converted to an integer.
7036 See "pack" in perlfunc.
7037 .IP "Unterminated '(*...' construct in regex; marked by <\-\- HERE in m/%s/" 4
7038 .IX Item "Unterminated '(*...' construct in regex; marked by <-- HERE in m/%s/"
7039 (F) You used a pattern of the form \f(CW\*(C`(*...)\*(C'\fR but did not terminate
7040 the pattern with a \f(CW\*(C`)\*(C'\fR. Fix the pattern and retry.
7041 .IP "Unterminated delimiter for here document" 4
7042 .IX Item "Unterminated delimiter for here document"
7043 (F) This message occurs when a here document label has an initial
7044 quotation mark but the final quotation mark is missing. Perhaps
7045 you wrote:
7046 .Sp
7047 .Vb 1
7048 \& <<"foo
7049 .Ve
7050 .Sp
7051 instead of:
7052 .Sp
7053 .Vb 1
7054 \& <<"foo"
7055 .Ve
7056 .IP "Unterminated \eg... pattern in regex; marked by <\-\-\ HERE in m/%s/" 4
7057 .IX Item "Unterminated g... pattern in regex; marked by <--\ HERE in m/%s/"
7058 .PD 0
7059 .IP "Unterminated \eg{...} pattern in regex; marked by <\-\-\ HERE in m/%s/" 4
7060 .IX Item "Unterminated g{...} pattern in regex; marked by <--\ HERE in m/%s/"
7061 .PD
7062 (F) In a regular expression, you had a \f(CW\*(C`\eg\*(C'\fR that wasn't followed by a
7063 proper group reference. In the case of \f(CW\*(C`\eg{\*(C'\fR, the closing brace is
7064 missing; otherwise the \f(CW\*(C`\eg\*(C'\fR must be followed by an integer. Fix the
7065 pattern and retry.
7066 .IP "Unterminated <> operator" 4
7067 .IX Item "Unterminated <> operator"
7068 (F) The lexer saw a left angle bracket in a place where it was expecting
7069 a term, so it's looking for the corresponding right angle bracket, and
7070 not finding it. Chances are you left some needed parentheses out
7071 earlier in the line, and you really meant a "less than".
7072 .IP "Unterminated verb pattern argument in regex; marked by <\-\-\ HERE in m/%s/" 4
7073 .IX Item "Unterminated verb pattern argument in regex; marked by <--\ HERE in m/%s/"
7074 (F) You used a pattern of the form \f(CW\*(C`(*VERB:ARG)\*(C'\fR but did not terminate
7075 the pattern with a \f(CW\*(C`)\*(C'\fR. Fix the pattern and retry.
7076 .IP "Unterminated verb pattern in regex; marked by <\-\-\ HERE in m/%s/" 4
7077 .IX Item "Unterminated verb pattern in regex; marked by <--\ HERE in m/%s/"
7078 (F) You used a pattern of the form \f(CW\*(C`(*VERB)\*(C'\fR but did not terminate
7079 the pattern with a \f(CW\*(C`)\*(C'\fR. Fix the pattern and retry.
7080 .ie n .IP "untie attempted while %d inner references still exist" 4
7081 .el .IP "untie attempted while \f(CW%d\fR inner references still exist" 4
7082 .IX Item "untie attempted while %d inner references still exist"
7083 (W untie) A copy of the object returned from \f(CW\*(C`tie\*(C'\fR (or \f(CW\*(C`tied\*(C'\fR) was
7084 still valid when \f(CW\*(C`untie\*(C'\fR was called.
7085 .IP "Usage: POSIX::%s(%s)" 4
7086 .IX Item "Usage: POSIX::%s(%s)"
7087 (F) You called a POSIX function with incorrect arguments.
7088 See "FUNCTIONS" in POSIX for more information.
7089 .IP "Usage: Win32::%s(%s)" 4
7090 .IX Item "Usage: Win32::%s(%s)"
7091 (F) You called a Win32 function with incorrect arguments.
7092 See Win32 for more information.
7093 .ie n .IP "$[ used in %s (did you mean $] ?)" 4
7094 .el .IP "$[ used in \f(CW%s\fR (did you mean $] ?)" 4
7095 .IX Item "$[ used in %s (did you mean $] ?)"
7096 (W syntax) You used \f(CW$[\fR in a comparison, such as:
7097 .Sp
7098 .Vb 3
7099 \& if ($[ > 5.006) {
7100 \& ...
7101 \& }
7102 .Ve
7103 .Sp
7104 You probably meant to use \f(CW$]\fR instead. \f(CW$[\fR is the base for indexing
7105 arrays. \f(CW$]\fR is the Perl version number in decimal.
7106 .IP "Use ""%s"" instead of ""%s""" 4
7107 .IX Item "Use ""%s"" instead of ""%s"""
7108 (F) The second listed construct is no longer legal. Use the first one
7109 instead.
7110 .IP "Useless assignment to a temporary" 4
7111 .IX Item "Useless assignment to a temporary"
7112 (W misc) You assigned to an lvalue subroutine, but what
7113 the subroutine returned was a temporary scalar about to
7114 be discarded, so the assignment had no effect.
7115 .IP "Useless (?\-%s) \- don't use /%s modifier in regex; marked by <\-\-\ HERE in m/%s/" 4
7116 .IX Item "Useless (?-%s) - don't use /%s modifier in regex; marked by <--\ HERE in m/%s/"
7117 (W regexp) You have used an internal modifier such as (?\-o) that has no
7118 meaning unless removed from the entire regexp:
7119 .Sp
7120 .Vb 1
7121 \& if ($string =~ /(?\-o)$pattern/o) { ... }
7122 .Ve
7123 .Sp
7124 must be written as
7125 .Sp
7126 .Vb 1
7127 \& if ($string =~ /$pattern/) { ... }
7128 .Ve
7129 .Sp
7130 The <\-\-\ HERE shows whereabouts in the regular expression the problem was
7131 discovered. See perlre.
7132 .ie n .IP "Useless localization of %s" 4
7133 .el .IP "Useless localization of \f(CW%s\fR" 4
7134 .IX Item "Useless localization of %s"
7135 (W syntax) The localization of lvalues such as \f(CWlocal($x=10)\fR is legal,
7136 but in fact the \fBlocal()\fR currently has no effect. This may change at
7137 some point in the future, but in the meantime such code is discouraged.
7138 .IP "Useless (?%s) \- use /%s modifier in regex; marked by <\-\-\ HERE in m/%s/" 4
7139 .IX Item "Useless (?%s) - use /%s modifier in regex; marked by <--\ HERE in m/%s/"
7140 (W regexp) You have used an internal modifier such as (?o) that has no
7141 meaning unless applied to the entire regexp:
7142 .Sp
7143 .Vb 1
7144 \& if ($string =~ /(?o)$pattern/) { ... }
7145 .Ve
7146 .Sp
7147 must be written as
7148 .Sp
7149 .Vb 1
7150 \& if ($string =~ /$pattern/o) { ... }
7151 .Ve
7152 .Sp
7153 The <\-\-\ HERE shows whereabouts in the regular expression the problem was
7154 discovered. See perlre.
7155 .IP "Useless use of attribute ""const""" 4
7156 .IX Item "Useless use of attribute ""const"""
7157 (W misc) The \f(CW\*(C`const\*(C'\fR attribute has no effect except
7158 on anonymous closure prototypes. You applied it to
7159 a subroutine via attributes.pm. This is only useful
7160 inside an attribute handler for an anonymous subroutine.
7161 .IP "Useless use of /d modifier in transliteration operator" 4
7162 .IX Item "Useless use of /d modifier in transliteration operator"
7163 (W misc) You have used the /d modifier where the searchlist has the
7164 same length as the replacelist. See perlop for more information
7165 about the /d modifier.
7166 .IP "Useless use of \eE" 4
7167 .IX Item "Useless use of E"
7168 (W misc) You have a \eE in a double-quotish string without a \f(CW\*(C`\eU\*(C'\fR,
7169 \&\f(CW\*(C`\eL\*(C'\fR or \f(CW\*(C`\eQ\*(C'\fR preceding it.
7170 .IP "Useless use of greediness modifier '%c' in regex; marked by <\-\-\ HERE in m/%s/" 4
7171 .IX Item "Useless use of greediness modifier '%c' in regex; marked by <--\ HERE in m/%s/"
7172 (W regexp) You specified something like these:
7173 .Sp
7174 .Vb 2
7175 \& qr/a{3}?/
7176 \& qr/b{1,1}+/
7177 .Ve
7178 .Sp
7179 The \f(CW"?"\fR and \f(CW"+"\fR don't have any effect, as they modify whether to
7180 match more or fewer when there is a choice, and by specifying to match
7181 exactly a given number, there is no room left for a choice.
7182 .ie n .IP "Useless use of %s in scalar context" 4
7183 .el .IP "Useless use of \f(CW%s\fR in scalar context" 4
7184 .IX Item "Useless use of %s in scalar context"
7185 (W scalar) You did something whose only interesting return value is a
7186 list without a side effect in scalar context, which does not accept a
7187 list.
7188 .Sp
7189 For example
7190 .Sp
7191 .Vb 1
7192 \& my $x = sort @y;
7193 .Ve
7194 .Sp
7195 This is not very useful, and perl currently optimizes this away.
7196 .ie n .IP "Useless use of %s in void context" 4
7197 .el .IP "Useless use of \f(CW%s\fR in void context" 4
7198 .IX Item "Useless use of %s in void context"
7199 (W void) You did something without a side effect in a context that does
7200 nothing with the return value, such as a statement that doesn't return a
7201 value from a block, or the left side of a scalar comma operator. Very
7202 often this points not to stupidity on your part, but a failure of Perl
7203 to parse your program the way you thought it would. For example, you'd
7204 get this if you mixed up your C precedence with Python precedence and
7205 said
7206 .Sp
7207 .Vb 1
7208 \& $one, $two = 1, 2;
7209 .Ve
7210 .Sp
7211 when you meant to say
7212 .Sp
7213 .Vb 1
7214 \& ($one, $two) = (1, 2);
7215 .Ve
7216 .Sp
7217 Another common error is to use ordinary parentheses to construct a list
7218 reference when you should be using square or curly brackets, for
7219 example, if you say
7220 .Sp
7221 .Vb 1
7222 \& $array = (1,2);
7223 .Ve
7224 .Sp
7225 when you should have said
7226 .Sp
7227 .Vb 1
7228 \& $array = [1,2];
7229 .Ve
7230 .Sp
7231 The square brackets explicitly turn a list value into a scalar value,
7232 while parentheses do not. So when a parenthesized list is evaluated in
7233 a scalar context, the comma is treated like C's comma operator, which
7234 throws away the left argument, which is not what you want. See
7235 perlref for more on this.
7236 .Sp
7237 This warning will not be issued for numerical constants equal to 0 or 1
7238 since they are often used in statements like
7239 .Sp
7240 .Vb 1
7241 \& 1 while sub_with_side_effects();
7242 .Ve
7243 .Sp
7244 String constants that would normally evaluate to 0 or 1 are warned
7245 about.
7246 .IP "Useless use of (?\-p) in regex; marked by <\-\-\ HERE in m/%s/" 4
7247 .IX Item "Useless use of (?-p) in regex; marked by <--\ HERE in m/%s/"
7248 (W regexp) The \f(CW\*(C`p\*(C'\fR modifier cannot be turned off once set. Trying to do
7249 so is futile.
7250 .IP "Useless use of ""re"" pragma" 4
7251 .IX Item "Useless use of ""re"" pragma"
7252 (W) You did \f(CW\*(C`use re;\*(C'\fR without any arguments. That isn't very useful.
7253 .ie n .IP "Useless use of %s with no values" 4
7254 .el .IP "Useless use of \f(CW%s\fR with no values" 4
7255 .IX Item "Useless use of %s with no values"
7256 (W syntax) You used the \fBpush()\fR or \fBunshift()\fR function with no arguments
7257 apart from the array, like \f(CWpush(@x)\fR or \f(CWunshift(@foo)\fR. That won't
7258 usually have any effect on the array, so is completely useless. It's
7259 possible in principle that push(@tied_array) could have some effect
7260 if the array is tied to a class which implements a PUSH method. If so,
7261 you can write it as \f(CW\*(C`push(@tied_array,())\*(C'\fR to avoid this warning.
7262 .IP """use"" not allowed in expression" 4
7263 .IX Item """use"" not allowed in expression"
7264 (F) The "use" keyword is recognized and executed at compile time, and
7265 returns no useful value. See perlmod.
7266 .ie n .IP "Use of @_ in %s with signatured subroutine is experimental" 4
7267 .el .IP "Use of \f(CW@_\fR in \f(CW%s\fR with signatured subroutine is experimental" 4
7268 .IX Item "Use of @_ in %s with signatured subroutine is experimental"
7269 (S experimental::args_array_with_signatures) An expression involving the
7270 \&\f(CW@_\fR arguments array was found in a subroutine that uses a signature.
7271 This is experimental because the interaction between the arguments
7272 array and parameter handling via signatures is not guaranteed to remain
7273 stable in any future version of Perl, and such code should be avoided.
7274 .IP "Use of bare << to mean <<"""" is forbidden" 4
7275 .IX Item "Use of bare << to mean <<"""" is forbidden"
7276 (F) You are now required to use the explicitly quoted form if you wish
7277 to use an empty line as the terminator of the here-document.
7278 .Sp
7279 Use of a bare terminator was deprecated in Perl 5.000, and is a fatal
7280 error as of Perl 5.28.
7281 .IP "Use of /c modifier is meaningless in s///" 4
7282 .IX Item "Use of /c modifier is meaningless in s///"
7283 (W regexp) You used the /c modifier in a substitution. The /c
7284 modifier is not presently meaningful in substitutions.
7285 .IP "Use of /c modifier is meaningless without /g" 4
7286 .IX Item "Use of /c modifier is meaningless without /g"
7287 (W regexp) You used the /c modifier with a regex operand, but didn't
7288 use the /g modifier. Currently, /c is meaningful only when /g is
7289 used. (This may change in the future.)
7290 .IP "Use of code point 0x%s is not allowed; the permissible max is 0x%X" 4
7291 .IX Item "Use of code point 0x%s is not allowed; the permissible max is 0x%X"
7292 .PD 0
7293 .IP "Use of code point 0x%s is not allowed; the permissible max is 0x%X in regex; marked by <\-\- HERE in m/%s/" 4
7294 .IX Item "Use of code point 0x%s is not allowed; the permissible max is 0x%X in regex; marked by <-- HERE in m/%s/"
7295 .PD
7296 (F) You used a code point that is not allowed, because it is too large.
7297 Unicode only allows code points up to 0x10FFFF, but Perl allows much
7298 larger ones. Earlier versions of Perl allowed code points above IV_MAX
7299 (0x7FFFFFF on 32\-bit platforms, 0x7FFFFFFFFFFFFFFF on 64\-bit platforms),
7300 however, this could possibly break the perl interpreter in some constructs,
7301 including causing it to hang in a few cases.
7302 .Sp
7303 If your code is to run on various platforms, keep in mind that the upper
7304 limit depends on the platform. It is much larger on 64\-bit word sizes
7305 than 32\-bit ones.
7306 .Sp
7307 The use of out of range code points was deprecated in Perl 5.24, and
7308 became a fatal error in Perl 5.28.
7309 .IP "Use of \fBeach()\fR on hash after insertion without resetting hash iterator results in undefined behavior" 4
7310 .IX Item "Use of each() on hash after insertion without resetting hash iterator results in undefined behavior"
7311 (S internal) The behavior of \f(CWeach()\fR after insertion is undefined;
7312 it may skip items, or visit items more than once. Consider using
7313 \&\f(CWkeys()\fR instead of \f(CWeach()\fR.
7314 .IP "Use of := for an empty attribute list is not allowed" 4
7315 .IX Item "Use of := for an empty attribute list is not allowed"
7316 (F) The construction \f(CW\*(C`my $x := 42\*(C'\fR used to parse as equivalent to
7317 \&\f(CW\*(C`my $x : = 42\*(C'\fR (applying an empty attribute list to \f(CW$x\fR).
7318 This construct was deprecated in 5.12.0, and has now been made a syntax
7319 error, so \f(CW\*(C`:=\*(C'\fR can be reclaimed as a new operator in the future.
7320 .Sp
7321 If you need an empty attribute list, for example in a code generator, add
7322 a space before the \f(CW\*(C`=\*(C'\fR.
7323 .ie n .IP "Use of %s for non\-UTF\-8 locale is wrong. Assuming a UTF\-8 locale" 4
7324 .el .IP "Use of \f(CW%s\fR for non\-UTF\-8 locale is wrong. Assuming a UTF\-8 locale" 4
7325 .IX Item "Use of %s for non-UTF-8 locale is wrong. Assuming a UTF-8 locale"
7326 (W locale) You are matching a regular expression using locale rules,
7327 and the specified construct was encountered. This construct is only
7328 valid for UTF\-8 locales, which the current locale isn't. This doesn't
7329 make sense. Perl will continue, assuming a Unicode (UTF\-8) locale, but
7330 the results are likely to be wrong.
7331 .IP "Use of freed value in iteration" 4
7332 .IX Item "Use of freed value in iteration"
7333 (F) Perhaps you modified the iterated array within the loop?
7334 This error is typically caused by code like the following:
7335 .Sp
7336 .Vb 2
7337 \& @a = (3,4);
7338 \& @a = () for (1,2,@a);
7339 .Ve
7340 .Sp
7341 You are not supposed to modify arrays while they are being iterated over.
7342 For speed and efficiency reasons, Perl internally does not do full
7343 reference-counting of iterated items, hence deleting such an item in the
7344 middle of an iteration causes Perl to see a freed value.
7345 .IP "Use of /g modifier is meaningless in split" 4
7346 .IX Item "Use of /g modifier is meaningless in split"
7347 (W regexp) You used the /g modifier on the pattern for a \f(CW\*(C`split\*(C'\fR
7348 operator. Since \f(CW\*(C`split\*(C'\fR always tries to match the pattern
7349 repeatedly, the \f(CW\*(C`/g\*(C'\fR has no effect.
7350 .IP "Use of ""goto"" to jump into a construct is deprecated" 4
7351 .IX Item "Use of ""goto"" to jump into a construct is deprecated"
7352 (D deprecated::goto_construct) Using \f(CW\*(C`goto\*(C'\fR to jump from an outer scope into an inner
7353 scope is deprecated and will be removed completely in Perl 5.42.
7354 .Sp
7355 This was deprecated in Perl 5.12.
7356 .ie n .IP "Use of '%s' in \ep{} or \eP{} is deprecated because: %s" 4
7357 .el .IP "Use of '%s' in \ep{} or \eP{} is deprecated because: \f(CW%s\fR" 4
7358 .IX Item "Use of '%s' in p{} or P{} is deprecated because: %s"
7359 (D deprecated::unicode_property_name) Certain properties are deprecated
7360 by Unicode, and may eventually be removed from the Standard, at which
7361 time Perl will follow along. In the meantime, this message is raised to
7362 notify you.
7363 .ie n .IP "Use of inherited AUTOLOAD for non-method %s::%s() is no longer allowed" 4
7364 .el .IP "Use of inherited AUTOLOAD for non-method \f(CW%s::\fR%s() is no longer allowed" 4
7365 .IX Item "Use of inherited AUTOLOAD for non-method %s::%s() is no longer allowed"
7366 (F) As an accidental feature, \f(CW\*(C`AUTOLOAD\*(C'\fR subroutines were looked up as
7367 methods (using the \f(CW@ISA\fR hierarchy), even when the subroutines to be
7368 autoloaded were called as plain functions (e.g. \f(CWFoo::bar()\fR), not as
7369 methods (e.g. \f(CW\*(C`Foo\->bar()\*(C'\fR or \f(CW\*(C`$obj\->bar()\*(C'\fR).
7370 .Sp
7371 This was deprecated in Perl 5.004, and was made fatal in Perl 5.28.
7372 .ie n .IP "Use of %s in printf format not supported" 4
7373 .el .IP "Use of \f(CW%s\fR in printf format not supported" 4
7374 .IX Item "Use of %s in printf format not supported"
7375 (F) You attempted to use a feature of printf that is accessible from
7376 only C. This usually means there's a better way to do it in Perl.
7377 .IP "Use of '%s' is deprecated as a string delimiter" 4
7378 .IX Item "Use of '%s' is deprecated as a string delimiter"
7379 (D deprecated::delimiter_will_be_paired) You used the given character as
7380 a starting delimiter of a string outside the scope of
7381 \&\f(CW\*(C`use\ feature\ \*(Aqextra_paired_delimiters\*(Aq\*(C'\fR. This character is the
7382 mirror image of another Unicode character; within the scope of that
7383 feature, the two are considered a pair for delimitting strings. It is
7384 planned to make that feature the default, at which point this usage
7385 would become illegal; hence this warning.
7386 .Sp
7387 For now, you may live with this warning, or turn it off, but this code
7388 will no longer compile in a future version of Perl. Or you can turn on
7389 \&\f(CW\*(C`use\ feature\ \*(Aqextra_paired_delimiters\*(Aq\*(C'\fR and use the character that
7390 is the mirror image of this one for the closing string delimiter.
7391 .IP "Use of '%s' is experimental as a string delimiter" 4
7392 .IX Item "Use of '%s' is experimental as a string delimiter"
7393 (S experimental::extra_paired_delimiters) This warning is emitted if
7394 you use as a string delimiter one of the non-ASCII mirror image ones
7395 enabled by \f(CW\*(C`use\ feature\ \*(Aqextra_paired_delimiters\*(Aq\*(C'\fR. Simply suppress
7396 the warning if you want to use the feature, but know that in doing so
7397 you are taking the risk of using an experimental feature which may
7398 change or be removed in a future Perl version:
7399 .ie n .IP "Use of %s is not allowed in Unicode property wildcard subpatterns in regex; marked by <\-\-\ HERE in m/%s/" 4
7400 .el .IP "Use of \f(CW%s\fR is not allowed in Unicode property wildcard subpatterns in regex; marked by <\-\-\ HERE in m/%s/" 4
7401 .IX Item "Use of %s is not allowed in Unicode property wildcard subpatterns in regex; marked by <--\ HERE in m/%s/"
7402 (F) You were using a wildcard subpattern a Unicode property value, and
7403 the subpattern contained something that is illegal. Not all regular
7404 expression capabilities are legal in such subpatterns, and this is one.
7405 Rewrite your subppattern to not use the offending construct.
7406 See "Wildcards in Property Values" in perlunicode.
7407 .IP "Use of \-l on filehandle%s" 4
7408 .IX Item "Use of -l on filehandle%s"
7409 (W io) A filehandle represents an opened file, and when you opened the file
7410 it already went past any symlink you are presumably trying to look for.
7411 The operation returned \f(CW\*(C`undef\*(C'\fR. Use a filename instead.
7412 .IP "Use of reference ""%s"" as array index" 4
7413 .IX Item "Use of reference ""%s"" as array index"
7414 (W misc) You tried to use a reference as an array index; this probably
7415 isn't what you mean, because references in numerical context tend
7416 to be huge numbers, and so usually indicates programmer error.
7417 .Sp
7418 If you really do mean it, explicitly numify your reference, like so:
7419 \&\f(CW$array[0+$ref]\fR. This warning is not given for overloaded objects,
7420 however, because you can overload the numification and stringification
7421 operators and then you presumably know what you are doing.
7422 .ie n .IP "Use of strings with code points over 0xFF as arguments to %s operator is not allowed" 4
7423 .el .IP "Use of strings with code points over 0xFF as arguments to \f(CW%s\fR operator is not allowed" 4
7424 .IX Item "Use of strings with code points over 0xFF as arguments to %s operator is not allowed"
7425 (F) You tried to use one of the string bitwise operators (\f(CW\*(C`&\*(C'\fR or \f(CW\*(C`|\*(C'\fR or \f(CW\*(C`^\*(C'\fR or
7426 \&\f(CW\*(C`~\*(C'\fR) on a string containing a code point over 0xFF. The string bitwise
7427 operators treat their operands as strings of bytes, and values beyond
7428 0xFF are nonsensical in this context.
7429 .Sp
7430 Certain instances became fatal in Perl 5.28; others in perl 5.32.
7431 .IP "Use of strings with code points over 0xFF as arguments to vec is forbidden" 4
7432 .IX Item "Use of strings with code points over 0xFF as arguments to vec is forbidden"
7433 (F) You tried to use \f(CW\*(C`vec\*(C'\fR
7434 on a string containing a code point over 0xFF, which is nonsensical here.
7435 .Sp
7436 This became fatal in Perl 5.32.
7437 .ie n .IP "Use of tainted arguments in %s is deprecated" 4
7438 .el .IP "Use of tainted arguments in \f(CW%s\fR is deprecated" 4
7439 .IX Item "Use of tainted arguments in %s is deprecated"
7440 (W taint, deprecated) You have supplied \f(CWsystem()\fR or \f(CWexec()\fR with multiple
7441 arguments and at least one of them is tainted. This used to be allowed
7442 but will become a fatal error in a future version of perl. Untaint your
7443 arguments. See perlsec.
7444 .IP "Use of unassigned code point or non-standalone grapheme for a delimiter is not allowed" 4
7445 .IX Item "Use of unassigned code point or non-standalone grapheme for a delimiter is not allowed"
7446 (F)
7447 A grapheme is what appears to a native-speaker of a language to be a
7448 character. In Unicode (and hence Perl) a grapheme may actually be
7449 several adjacent characters that together form a complete grapheme. For
7450 example, there can be a base character, like "R" and an accent, like a
7451 circumflex "^", that appear when displayed to be a single character with
7452 the circumflex hovering over the "R". Perl currently allows things like
7453 that circumflex to be delimiters of strings, patterns, \fIetc\fR. When
7454 displayed, the circumflex would look like it belongs to the character
7455 just to the left of it. In order to move the language to be able to
7456 accept graphemes as delimiters, we cannot allow the use of
7457 delimiters which aren't graphemes by themselves. Also, a delimiter must
7458 already be assigned (or known to be never going to be assigned) to try
7459 to future-proof code, for otherwise code that works today would fail to
7460 compile if the currently unassigned delimiter ends up being something
7461 that isn't a stand-alone grapheme. Because Unicode is never going to
7462 assign
7463 non-character code points, nor
7464 code points that are above the legal Unicode maximum, those can be delimiters, and
7465 their use is legal.
7466 .IP "Use of uninitialized value%s" 4
7467 .IX Item "Use of uninitialized value%s"
7468 (W uninitialized) An undefined value was used as if it were already
7469 defined. It was interpreted as a "" or a 0, but maybe it was a mistake.
7470 To suppress this warning assign a defined value to your variables.
7471 .Sp
7472 To help you figure out what was undefined, perl will try to tell you
7473 the name of the variable (if any) that was undefined. In some cases
7474 it cannot do this, so it also tells you what operation you used the
7475 undefined value in. Note, however, that perl optimizes your program
7476 and the operation displayed in the warning may not necessarily appear
7477 literally in your program. For example, \f(CW"that $foo"\fR is usually
7478 optimized into \f(CW\*(C`"that " . $foo\*(C'\fR, and the warning will refer to the
7479 \&\f(CW\*(C`concatenation (.)\*(C'\fR operator, even though there is no \f(CW\*(C`.\*(C'\fR in
7480 your program.
7481 .IP """use re 'strict'"" is experimental" 4
7482 .IX Item """use re 'strict'"" is experimental"
7483 (S experimental::re_strict) The things that are different when a regular
7484 expression pattern is compiled under \f(CW\*(Aqstrict\*(Aq\fR are subject to change
7485 in future Perl releases in incompatible ways. This means that a pattern
7486 that compiles today may not in a future Perl release. This warning is
7487 to alert you to that risk.
7488 .IP "use VERSION is not permitted while another use VERSION of 5.39 or above is in scope" 4
7489 .IX Item "use VERSION is not permitted while another use VERSION of 5.39 or above is in scope"
7490 (F) Once you have a \f(CW\*(C`use VERSION\*(C'\fR declaration that calls for a Perl version
7491 of at least 5.39, you cannot have a subsequent one while the first is visible,
7492 even if it requests a later version.
7493 .IP "use VERSION of 5.39 or above is not permitted while another use VERSION is in scope" 4
7494 .IX Item "use VERSION of 5.39 or above is not permitted while another use VERSION is in scope"
7495 (F) Once you have a \f(CW\*(C`use VERSION\*(C'\fR declaration in scope, you cannot have a
7496 subsequent one that calls for a Perl version of at least 5.39 while the first
7497 is visible.
7498 .IP "Use \ex{...} for more than two hex characters in regex; marked by <\-\-\ HERE in m/%s/" 4
7499 .IX Item "Use x{...} for more than two hex characters in regex; marked by <--\ HERE in m/%s/"
7500 (F) In a regular expression, you said something like
7501 .Sp
7502 .Vb 1
7503 \& (?[ [ \exBEEF ] ])
7504 .Ve
7505 .Sp
7506 Perl isn't sure if you meant this
7507 .Sp
7508 .Vb 1
7509 \& (?[ [ \ex{BEEF} ] ])
7510 .Ve
7511 .Sp
7512 or if you meant this
7513 .Sp
7514 .Vb 1
7515 \& (?[ [ \ex{BE} E F ] ])
7516 .Ve
7517 .Sp
7518 You need to add either braces or blanks to disambiguate.
7519 .IP "Using just the first character returned by \eN{} in character class in regex; marked by <\-\-\ HERE in m/%s/" 4
7520 .IX Item "Using just the first character returned by N{} in character class in regex; marked by <--\ HERE in m/%s/"
7521 (W regexp) Named Unicode character escapes \f(CW\*(C`(\eN{...})\*(C'\fR may return
7522 a multi-character sequence. Even though a character class is
7523 supposed to match just one character of input, perl will match
7524 the whole thing correctly, except when the class is inverted
7525 (\f(CW\*(C`[^...]\*(C'\fR), or the escape is the beginning or final end point of
7526 a range. For these, what should happen isn't clear at all. In
7527 these circumstances, Perl discards all but the first character
7528 of the returned sequence, which is not likely what you want.
7529 .IP "Using just the single character results returned by \ep{} in (?[...]) in regex; marked by <\-\-\ HERE in m/%s/" 4
7530 .IX Item "Using just the single character results returned by p{} in (?[...]) in regex; marked by <--\ HERE in m/%s/"
7531 (W regexp) Extended character classes currently cannot handle operands
7532 that evaluate to more than one character. These are removed from the
7533 results of the expansion of the \f(CW\*(C`\ep{}\*(C'\fR.
7534 .Sp
7535 This situation can happen, for example, in
7536 .Sp
7537 .Vb 1
7538 \& (?[ \ep{name=/KATAKANA/} ])
7539 .Ve
7540 .Sp
7541 "KATAKANA LETTER AINU P" is a legal Unicode name (technically a "named
7542 sequence"), but it is actually two characters. The above expression
7543 with match only the Unicode names containing KATAKANA that represent
7544 single characters.
7545 .IP "Using /u for '%s' instead of /%s in regex; marked by <\-\-\ HERE in m/%s/" 4
7546 .IX Item "Using /u for '%s' instead of /%s in regex; marked by <--\ HERE in m/%s/"
7547 (W regexp) You used a Unicode boundary (\f(CW\*(C`\eb{...}\*(C'\fR or \f(CW\*(C`\eB{...}\*(C'\fR) in a
7548 portion of a regular expression where the character set modifiers \f(CW\*(C`/a\*(C'\fR
7549 or \f(CW\*(C`/aa\*(C'\fR are in effect. These two modifiers indicate an ASCII
7550 interpretation, and this doesn't make sense for a Unicode definition.
7551 The generated regular expression will compile so that the boundary uses
7552 all of Unicode. No other portion of the regular expression is affected.
7553 .ie n .IP "Using !~ with %s doesn't make sense" 4
7554 .el .IP "Using !~ with \f(CW%s\fR doesn't make sense" 4
7555 .IX Item "Using !~ with %s doesn't make sense"
7556 (F) Using the \f(CW\*(C`!~\*(C'\fR operator with \f(CW\*(C`s///r\*(C'\fR, \f(CW\*(C`tr///r\*(C'\fR or \f(CW\*(C`y///r\*(C'\fR is
7557 currently reserved for future use, as the exact behavior has not
7558 been decided. (Simply returning the boolean opposite of the
7559 modified string is usually not particularly useful.)
7560 .IP "UTF\-16 surrogate U+%X" 4
7561 .IX Item "UTF-16 surrogate U+%X"
7562 (S surrogate) You had a UTF\-16 surrogate in a context where they are
7563 not considered acceptable. These code points, between U+D800 and
7564 U+DFFF (inclusive), are used by Unicode only for UTF\-16. However, Perl
7565 internally allows all unsigned integer code points (up to the size limit
7566 available on your platform), including surrogates. But these can cause
7567 problems when being input or output, which is likely where this message
7568 came from. If you really really know what you are doing you can turn
7569 off this warning by \f(CW\*(C`no warnings \*(Aqsurrogate\*(Aq;\*(C'\fR.
7570 .ie n .IP "Value of %s can be ""0""; test with \fBdefined()\fR" 4
7571 .el .IP "Value of \f(CW%s\fR can be ""0""; test with \fBdefined()\fR" 4
7572 .IX Item "Value of %s can be ""0""; test with defined()"
7573 (W misc) In a conditional expression, you used <HANDLE>, <*> (glob),
7574 \&\f(CWeach()\fR, or \f(CWreaddir()\fR as a boolean value. Each of these constructs
7575 can return a value of "0"; that would make the conditional expression
7576 false, which is probably not what you intended. When using these
7577 constructs in conditional expressions, test their values with the
7578 \&\f(CW\*(C`defined\*(C'\fR operator.
7579 .IP "Value of CLI symbol ""%s"" too long" 4
7580 .IX Item "Value of CLI symbol ""%s"" too long"
7581 (W misc) A warning peculiar to VMS. Perl tried to read the value of an
7582 \&\f(CW%ENV\fR element from a CLI symbol table, and found a resultant string
7583 longer than 1024 characters. The return value has been truncated to
7584 1024 characters.
7585 .IP "Variable ""%s"" is not available" 4
7586 .IX Item "Variable ""%s"" is not available"
7587 (W closure) During compilation, an inner named subroutine or eval is
7588 attempting to capture an outer lexical that is not currently available.
7589 This can happen for one of two reasons. First, the outer lexical may be
7590 declared in an outer anonymous subroutine that has not yet been created.
7591 (Remember that named subs are created at compile time, while anonymous
7592 subs are created at run-time.) For example,
7593 .Sp
7594 .Vb 1
7595 \& sub { my $x; sub f { $x } }
7596 .Ve
7597 .Sp
7598 At the time that f is created, it can't capture the current value of \f(CW$x\fR,
7599 since the anonymous subroutine hasn't been created yet. Conversely,
7600 the following won't give a warning since the anonymous subroutine has by
7601 now been created and is live:
7602 .Sp
7603 .Vb 1
7604 \& sub { my $x; eval \*(Aqsub f { $x }\*(Aq }\->();
7605 .Ve
7606 .Sp
7607 The second situation is caused by an eval accessing a variable that has
7608 gone out of scope, for example,
7609 .Sp
7610 .Vb 5
7611 \& sub f {
7612 \& my $x;
7613 \& sub { eval \*(Aq$x\*(Aq }
7614 \& }
7615 \& f()\->();
7616 .Ve
7617 .Sp
7618 Here, when the '$x' in the eval is being compiled, f() is not currently
7619 being executed, so its \f(CW$x\fR is not available for capture.
7620 .IP "Variable ""%s"" is not imported%s" 4
7621 .IX Item "Variable ""%s"" is not imported%s"
7622 (S misc) With "use strict" in effect, you referred to a global variable
7623 that you apparently thought was imported from another module, because
7624 something else of the same name (usually a subroutine) is exported by
7625 that module. It usually means you put the wrong funny character on the
7626 front of your variable. It is also possible you used an "our" variable
7627 whose scope has ended.
7628 .IP "Variable length lookbehind not implemented in regex m/%s/" 4
7629 .IX Item "Variable length lookbehind not implemented in regex m/%s/"
7630 (F) \fBThis message no longer should be raised as of Perl 5.30.\fR It is
7631 retained in this document as a convenience for people using an earlier
7632 Perl version.
7633 .Sp
7634 In Perl 5.30 and earlier, lookbehind is allowed
7635 only for subexpressions whose length is fixed and
7636 known at compile time. For positive lookbehind, you can use the \f(CW\*(C`\eK\*(C'\fR
7637 regex construct as a way to get the equivalent functionality. See
7638 (?<=pattern) and \eK in perlre.
7639 .Sp
7640 Starting in Perl 5.18, there are non-obvious Unicode rules under \f(CW\*(C`/i\*(C'\fR
7641 that can match variably, but which you might not think could. For
7642 example, the substring \f(CW"ss"\fR can match the single character LATIN
7643 SMALL LETTER SHARP S. Here's a complete list of the current ones
7644 affecting ASCII characters:
7645 .Sp
7646 .Vb 11
7647 \& ASCII
7648 \& sequence Matches single letter under /i
7649 \& FF U+FB00 LATIN SMALL LIGATURE FF
7650 \& FFI U+FB03 LATIN SMALL LIGATURE FFI
7651 \& FFL U+FB04 LATIN SMALL LIGATURE FFL
7652 \& FI U+FB01 LATIN SMALL LIGATURE FI
7653 \& FL U+FB02 LATIN SMALL LIGATURE FL
7654 \& SS U+00DF LATIN SMALL LETTER SHARP S
7655 \& U+1E9E LATIN CAPITAL LETTER SHARP S
7656 \& ST U+FB06 LATIN SMALL LIGATURE ST
7657 \& U+FB05 LATIN SMALL LIGATURE LONG S T
7658 .Ve
7659 .Sp
7660 This list is subject to change, but is quite unlikely to.
7661 Each ASCII sequence can be any combination of upper\- and lowercase.
7662 .Sp
7663 You can avoid this by using a bracketed character class in the
7664 lookbehind assertion, like
7665 .Sp
7666 .Vb 2
7667 \& (?<![sS]t)
7668 \& (?<![fF]f[iI])
7669 .Ve
7670 .Sp
7671 This fools Perl into not matching the ligatures.
7672 .Sp
7673 Another option for Perls starting with 5.16, if you only care about
7674 ASCII matches, is to add the \f(CW\*(C`/aa\*(C'\fR modifier to the regex. This will
7675 exclude all these non-obvious matches, thus getting rid of this message.
7676 You can also say
7677 .Sp
7678 .Vb 1
7679 \& use if $] ge 5.016, re => \*(Aq/aa\*(Aq;
7680 .Ve
7681 .Sp
7682 to apply \f(CW\*(C`/aa\*(C'\fR to all regular expressions compiled within its scope.
7683 See re.
7684 .IP "Variable length positive lookbehind with capturing is experimental in regex m/%s/" 4
7685 .IX Item "Variable length positive lookbehind with capturing is experimental in regex m/%s/"
7686 (W) Variable length positive lookbehind with capturing is not well defined. This
7687 warning alerts you to the fact that you are using a construct which may
7688 change in a future version of perl. See the
7689 documentation of Positive Lookbehind in perlre
7690 for details. You may silence this warning with the following:
7691 .Sp
7692 .Vb 1
7693 \& no warnings \*(Aqexperimental::vlb\*(Aq;
7694 .Ve
7695 .IP "Variable length negative lookbehind with capturing is experimental in regex m/%s/" 4
7696 .IX Item "Variable length negative lookbehind with capturing is experimental in regex m/%s/"
7697 (W) Variable length negative lookbehind with capturing is not well defined. This
7698 warning alerts you to the fact that you are using a construct which may
7699 change in a future version of perl. See the
7700 documentation of Negative Lookbehind in perlre
7701 for details. You may silence this warning with the following:
7702 .Sp
7703 .Vb 1
7704 \& no warnings \*(Aqexperimental::vlb\*(Aq;
7705 .Ve
7706 .ie n .IP """%s"" variable %s masks earlier declaration in same %s" 4
7707 .el .IP """%s"" variable \f(CW%s\fR masks earlier declaration in same \f(CW%s\fR" 4
7708 .IX Item """%s"" variable %s masks earlier declaration in same %s"
7709 (W shadow) A "my", "our", "state" or "field" variable has been redeclared in
7710 the current scope or statement, effectively eliminating all access to the
7711 previous instance. This is almost always a typographical error. Note
7712 that the earlier variable will still exist until the end of the scope
7713 or until all closure references to it are destroyed.
7714 .IP "Variable syntax" 4
7715 .IX Item "Variable syntax"
7716 (A) You've accidentally run your script through \fBcsh\fR instead
7717 of Perl. Check the #! line, or manually feed your script into
7718 Perl yourself.
7719 .IP "Variable ""%s"" will not stay shared" 4
7720 .IX Item "Variable ""%s"" will not stay shared"
7721 (W closure) An inner (nested) \fInamed\fR subroutine is referencing a
7722 lexical variable defined in an outer named subroutine.
7723 .Sp
7724 When the inner subroutine is called, it will see the value of
7725 the outer subroutine's variable as it was before and during the *first*
7726 call to the outer subroutine; in this case, after the first call to the
7727 outer subroutine is complete, the inner and outer subroutines will no
7728 longer share a common value for the variable. In other words, the
7729 variable will no longer be shared.
7730 .Sp
7731 This problem can usually be solved by making the inner subroutine
7732 anonymous, using the \f(CW\*(C`sub {}\*(C'\fR syntax. When inner anonymous subs that
7733 reference variables in outer subroutines are created, they
7734 are automatically rebound to the current values of such variables.
7735 .IP "vector argument not supported with alpha versions" 4
7736 .IX Item "vector argument not supported with alpha versions"
7737 (S printf) The \f(CW%vd\fR (s)printf format does not support version objects
7738 with alpha parts.
7739 .IP "Verb pattern '%s' has a mandatory argument in regex; marked by <\-\-\ HERE in m/%s/" 4
7740 .IX Item "Verb pattern '%s' has a mandatory argument in regex; marked by <--\ HERE in m/%s/"
7741 (F) You used a verb pattern that requires an argument. Supply an
7742 argument or check that you are using the right verb.
7743 .IP "Verb pattern '%s' may not have an argument in regex; marked by <\-\-\ HERE in m/%s/" 4
7744 .IX Item "Verb pattern '%s' may not have an argument in regex; marked by <--\ HERE in m/%s/"
7745 (F) You used a verb pattern that is not allowed an argument. Remove the
7746 argument or check that you are using the right verb.
7747 .IP "Version control conflict marker" 4
7748 .IX Item "Version control conflict marker"
7749 (F) The parser found a line starting with \f(CW\*(C`<<<<<<<\*(C'\fR,
7750 \&\f(CW\*(C`>>>>>>>\*(C'\fR, or \f(CW\*(C`=======\*(C'\fR. These may be left by a
7751 version control system to mark conflicts after a failed merge operation.
7752 .IP "Version number must be a constant number" 4
7753 .IX Item "Version number must be a constant number"
7754 (P) The attempt to translate a \f(CW\*(C`use Module n.n LIST\*(C'\fR statement into
7755 its equivalent \f(CW\*(C`BEGIN\*(C'\fR block found an internal inconsistency with
7756 the version number.
7757 .IP "Version string '%s' contains invalid data; ignoring: '%s'" 4
7758 .IX Item "Version string '%s' contains invalid data; ignoring: '%s'"
7759 (W misc) The version string contains invalid characters at the end, which
7760 are being ignored.
7761 .IP "Warning: something's wrong" 4
7762 .IX Item "Warning: something's wrong"
7763 (W) You passed \fBwarn()\fR an empty string (the equivalent of \f(CW\*(C`warn ""\*(C'\fR) or
7764 you called it with no args and \f(CW$@\fR was empty.
7765 .ie n .IP "Warning: unable to close filehandle %s properly" 4
7766 .el .IP "Warning: unable to close filehandle \f(CW%s\fR properly" 4
7767 .IX Item "Warning: unable to close filehandle %s properly"
7768 (S) The implicit \fBclose()\fR done by an \fBopen()\fR got an error indication on
7769 the \fBclose()\fR. This usually indicates your file system ran out of disk
7770 space.
7771 .ie n .IP "Warning: unable to close filehandle properly: %s" 4
7772 .el .IP "Warning: unable to close filehandle properly: \f(CW%s\fR" 4
7773 .IX Item "Warning: unable to close filehandle properly: %s"
7774 .PD 0
7775 .ie n .IP "Warning: unable to close filehandle %s properly: %s" 4
7776 .el .IP "Warning: unable to close filehandle \f(CW%s\fR properly: \f(CW%s\fR" 4
7777 .IX Item "Warning: unable to close filehandle %s properly: %s"
7778 .PD
7779 (S io) There were errors during the implicit \fBclose()\fR done on a filehandle
7780 when its reference count reached zero while it was still open, e.g.:
7781 .Sp
7782 .Vb 4
7783 \& {
7784 \& open my $fh, \*(Aq>\*(Aq, $file or die "open: \*(Aq$file\*(Aq: $!\en";
7785 \& print $fh $data or die "print: $!";
7786 \& } # implicit close here
7787 .Ve
7788 .Sp
7789 Because various errors may only be detected by \fBclose()\fR (e.g. buffering could
7790 allow the \f(CW\*(C`print\*(C'\fR in this example to return true even when the disk is full),
7791 it is dangerous to ignore its result. So when it happens implicitly, perl
7792 will signal errors by warning.
7793 .Sp
7794 \&\fBPrior to version 5.22.0, perl ignored such errors\fR, so the common idiom shown
7795 above was liable to cause \fBsilent data loss\fR.
7796 .IP "Warning: Use of ""%s"" without parentheses is ambiguous" 4
7797 .IX Item "Warning: Use of ""%s"" without parentheses is ambiguous"
7798 (S ambiguous) You wrote a unary operator followed by something that
7799 looks like a binary operator that could also have been interpreted as a
7800 term or unary operator. For instance, if you know that the rand
7801 function has a default argument of 1.0, and you write
7802 .Sp
7803 .Vb 1
7804 \& rand + 5;
7805 .Ve
7806 .Sp
7807 you may THINK you wrote the same thing as
7808 .Sp
7809 .Vb 1
7810 \& rand() + 5;
7811 .Ve
7812 .Sp
7813 but in actual fact, you got
7814 .Sp
7815 .Vb 1
7816 \& rand(+5);
7817 .Ve
7818 .Sp
7819 So put in parentheses to say what you really mean.
7820 .IP "when is deprecated" 4
7821 .IX Item "when is deprecated"
7822 (D deprecated::smartmatch) \f(CW\*(C`when\*(C'\fR depends on smartmatch, which is
7823 deprecated. Additionally, it has several special cases that may
7824 not be immediately obvious, and it will be removed in Perl 5.42.
7825 See the explanation
7826 under "Experimental Details on given and when" in perlsyn.
7827 .ie n .IP "Wide character in %s" 4
7828 .el .IP "Wide character in \f(CW%s\fR" 4
7829 .IX Item "Wide character in %s"
7830 (S utf8) Perl met a wide character (ordinal >255) when it wasn't
7831 expecting one. This warning is by default on for I/O (like print).
7832 .Sp
7833 If this warning does come from I/O, the easiest
7834 way to quiet it is simply to add the \f(CW\*(C`:utf8\*(C'\fR layer, \fIe.g.\fR,
7835 \&\f(CW\*(C`binmode\ STDOUT,\ \*(Aq:utf8\*(Aq\*(C'\fR. Another way to turn off the warning is
7836 to add \f(CW\*(C`no\ warnings\ \*(Aqutf8\*(Aq;\*(C'\fR but that is often closer to
7837 cheating. In general, you are supposed to explicitly mark the
7838 filehandle with an encoding, see open and "binmode" in perlfunc.
7839 .Sp
7840 If the warning comes from other than I/O, this diagnostic probably
7841 indicates that incorrect results are being obtained. You should examine
7842 your code to determine how a wide character is getting to an operation
7843 that doesn't handle them.
7844 .ie n .IP "Wide character (U+%X) in %s" 4
7845 .el .IP "Wide character (U+%X) in \f(CW%s\fR" 4
7846 .IX Item "Wide character (U+%X) in %s"
7847 (W locale) While in a single-byte locale (\fIi.e.\fR, a non\-UTF\-8
7848 one), a multi-byte character was encountered. Perl considers this
7849 character to be the specified Unicode code point. Combining non\-UTF\-8
7850 locales and Unicode is dangerous. Almost certainly some characters
7851 will have two different representations. For example, in the ISO 8859\-7
7852 (Greek) locale, the code point 0xC3 represents a Capital Gamma. But so
7853 also does 0x393. This will make string comparisons unreliable.
7854 .Sp
7855 You likely need to figure out how this multi-byte character got mixed up
7856 with your single-byte locale (or perhaps you thought you had a UTF\-8
7857 locale, but Perl disagrees).
7858 .IP "Within []\-length '%c' not allowed" 4
7859 .IX Item "Within []-length '%c' not allowed"
7860 (F) The count in the (un)pack template may be replaced by \f(CW\*(C`[TEMPLATE]\*(C'\fR
7861 only if \f(CW\*(C`TEMPLATE\*(C'\fR always matches the same amount of packed bytes that
7862 can be determined from the template alone. This is not possible if
7863 it contains any of the codes @, /, U, u, w or a *\-length. Redesign
7864 the template.
7865 .ie n .IP "While trying to resolve method call %s\->%s() can not locate package ""%s"" yet it is mentioned in @%s::ISA (perhaps you forgot to load ""%s""?)" 4
7866 .el .IP "While trying to resolve method call \f(CW%s\fR\->%s() can not locate package ""%s"" yet it is mentioned in @%s::ISA (perhaps you forgot to load ""%s""?)" 4
7867 .IX Item "While trying to resolve method call %s->%s() can not locate package ""%s"" yet it is mentioned in @%s::ISA (perhaps you forgot to load ""%s""?)"
7868 (W syntax) It is possible that the \f(CW@ISA\fR contains a misspelled or never loaded
7869 package name, which can result in perl choosing an unexpected parent
7870 class's method to resolve the method call. If this is deliberate you
7871 can do something like
7872 .Sp
7873 .Vb 1
7874 \& @Missing::Package::ISA = ();
7875 .Ve
7876 .Sp
7877 to silence the warnings, otherwise you should correct the package name, or
7878 ensure that the package is loaded prior to the method call.
7879 .IP "%s() with negative argument" 4
7880 .IX Item "%s() with negative argument"
7881 (S misc) Certain operations make no sense with negative arguments.
7882 Warning is given and the operation is not done.
7883 .ie n .IP "\fBwrite()\fR on closed filehandle %s" 4
7884 .el .IP "\fBwrite()\fR on closed filehandle \f(CW%s\fR" 4
7885 .IX Item "write() on closed filehandle %s"
7886 (W closed) The filehandle you're writing to got itself closed sometime
7887 before now. Check your control flow.
7888 .ie n .IP "%s ""\ex%X"" does not map to Unicode" 4
7889 .el .IP "\f(CW%s\fR ""\ex%X"" does not map to Unicode" 4
7890 .IX Item "%s ""x%X"" does not map to Unicode"
7891 (S utf8) When reading in different encodings, Perl tries to
7892 map everything into Unicode characters. The bytes you read
7893 in are not legal in this encoding. For example
7894 .Sp
7895 .Vb 1
7896 \& utf8 "\exE4" does not map to Unicode
7897 .Ve
7898 .Sp
7899 if you try to read in the a\-diaereses Latin\-1 as UTF\-8.
7900 .IP "'X' outside of string" 4
7901 .IX Item "'X' outside of string"
7902 (F) You had a (un)pack template that specified a relative position before
7903 the beginning of the string being (un)packed. See "pack" in perlfunc.
7904 .IP "'x' outside of string in unpack" 4
7905 .IX Item "'x' outside of string in unpack"
7906 (F) You had an unpack template that specified a relative position after
7907 the end of the string being unpacked. See "pack" in perlfunc.
7908 .IP "YOU HAVEN'T DISABLED SET-ID SCRIPTS IN THE KERNEL YET!" 4
7909 .IX Item "YOU HAVEN'T DISABLED SET-ID SCRIPTS IN THE KERNEL YET!"
7910 (F) And you probably never will, because you probably don't have the
7911 sources to your kernel, and your vendor probably doesn't give a rip
7912 about what you want. There is a vulnerability anywhere that you have a
7913 set-id script, and to close it you need to remove the set-id bit from
7914 the script that you're attempting to run. To actually run the script
7915 set-id, your best bet is to put a set-id C wrapper around your script.
7916 .IP "You need to quote ""%s""" 4
7917 .IX Item "You need to quote ""%s"""
7918 (W syntax) You assigned a bareword as a signal handler name:
7919 .Sp
7920 .Vb 1
7921 \& $SIG{...} = foo;
7922 .Ve
7923 .Sp
7924 However, this will not make \f(CW\*(C`sub foo\*(C'\fR the signal handler. Instead, Perl
7925 will call the subroutine when the assignment is executed and use the
7926 returned value as the signal handler, which is probably not what you want.
7927 (If it \fIis\fR what you want, put \f(CW\*(C`()\*(C'\fR after the subroutine name to avoid
7928 the warning.)
7929 .Sp
7930 To register the subroutine as the signal handler, take a reference to it:
7931 .Sp
7932 .Vb 1
7933 \& $SIG{...} = \e&foo;
7934 .Ve
7935 .IP "Your random numbers are not that random" 4
7936 .IX Item "Your random numbers are not that random"
7937 (F) When trying to initialize the random seed for hashes, Perl could
7938 not get any randomness out of your system. This usually indicates
7939 Something Very Wrong.
7940 .IP "Zero length \eN{} in regex; marked by <\-\-\ HERE in m/%s/" 4
7941 .IX Item "Zero length N{} in regex; marked by <--\ HERE in m/%s/"
7942 (F) Named Unicode character escapes (\f(CW\*(C`\eN{...}\*(C'\fR) may return a zero-length
7943 sequence. Such an escape was used in an extended character class, i.e.
7944 \&\f(CW\*(C`(?[...])\*(C'\fR, or under \f(CW\*(C`use re \*(Aqstrict\*(Aq\*(C'\fR, which is not permitted. Check
7945 that the correct escape has been used, and the correct charnames handler
7946 is in scope. The <\-\-\ HERE shows whereabouts in the regular
7947 expression the problem was discovered.
7948 .SH "SEE ALSO"
7949 .IX Header "SEE ALSO"
7950 warnings, diagnostics.