| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* Copyright (C) 2008-2010 Pavel Cheblakov <[email protected]> |
| 4 |
* |
| 5 |
* Derived from the ems_pci.c driver: |
| 6 |
* Copyright (C) 2007 Wolfgang Grandegger <[email protected]> |
| 7 |
* Copyright (C) 2008 Markus Plessing <[email protected]> |
| 8 |
* Copyright (C) 2008 Sebastian Haas <[email protected]> |
| 9 |
*/ |
| 10 |
|
| 11 |
#include <linux/kernel.h> |
| 12 |
#include <linux/module.h> |
| 13 |
#include <linux/interrupt.h> |
| 14 |
#include <linux/netdevice.h> |
| 15 |
#include <linux/delay.h> |
| 16 |
#include <linux/slab.h> |
| 17 |
#include <linux/pci.h> |
| 18 |
#include <linux/can/dev.h> |
| 19 |
#include <linux/io.h> |
| 20 |
|
| 21 |
#include "sja1000.h" |
| 22 |
|
| 23 |
#define DRV_NAME "sja1000_plx_pci" |
| 24 |
|
| 25 |
MODULE_AUTHOR("Pavel Cheblakov <[email protected]>"); |
| 26 |
MODULE_DESCRIPTION("Socket-CAN driver for PLX90xx PCI-bridge cards with " |
| 27 |
"the SJA1000 chips"); |
| 28 |
MODULE_LICENSE("GPL v2"); |
| 29 |
|
| 30 |
#define PLX_PCI_MAX_CHAN 2 |
| 31 |
|
| 32 |
struct plx_pci_card { |
| 33 |
int channels; /* detected channels count */ |
| 34 |
struct net_device *net_dev[PLX_PCI_MAX_CHAN]; |
| 35 |
void __iomem *conf_addr; |
| 36 |
|
| 37 |
/* Pointer to device-dependent reset function */ |
| 38 |
void (*reset_func)(struct pci_dev *pdev); |
| 39 |
}; |
| 40 |
|
| 41 |
#define PLX_PCI_CAN_CLOCK (16000000 / 2) |
| 42 |
|
| 43 |
/* PLX9030/9050/9052 registers */ |
| 44 |
#define PLX_INTCSR 0x4c /* Interrupt Control/Status */ |
| 45 |
#define PLX_CNTRL 0x50 /* User I/O, Direct Slave Response, |
| 46 |
* Serial EEPROM, and Initialization |
| 47 |
* Control register |
| 48 |
*/ |
| 49 |
|
| 50 |
#define PLX_LINT1_EN 0x1 /* Local interrupt 1 enable */ |
| 51 |
#define PLX_LINT1_POL (1 << 1) /* Local interrupt 1 polarity */ |
| 52 |
#define PLX_LINT2_EN (1 << 3) /* Local interrupt 2 enable */ |
| 53 |
#define PLX_LINT2_POL (1 << 4) /* Local interrupt 2 polarity */ |
| 54 |
#define PLX_PCI_INT_EN (1 << 6) /* PCI Interrupt Enable */ |
| 55 |
#define PLX_PCI_RESET (1 << 30) /* PCI Adapter Software Reset */ |
| 56 |
|
| 57 |
/* PLX9056 registers */ |
| 58 |
#define PLX9056_INTCSR 0x68 /* Interrupt Control/Status */ |
| 59 |
#define PLX9056_CNTRL 0x6c /* Control / Software Reset */ |
| 60 |
|
| 61 |
#define PLX9056_LINTI (1 << 11) |
| 62 |
#define PLX9056_PCI_INT_EN (1 << 8) |
| 63 |
#define PLX9056_PCI_RCR (1 << 29) /* Read Configuration Registers */ |
| 64 |
|
| 65 |
/* |
| 66 |
* The board configuration is probably following: |
| 67 |
* RX1 is connected to ground. |
| 68 |
* TX1 is not connected. |
| 69 |
* CLKO is not connected. |
| 70 |
* Setting the OCR register to 0xDA is a good idea. |
| 71 |
* This means normal output mode, push-pull and the correct polarity. |
| 72 |
*/ |
| 73 |
#define PLX_PCI_OCR (OCR_TX0_PUSHPULL | OCR_TX1_PUSHPULL) |
| 74 |
|
| 75 |
/* OCR setting for ASEM Dual CAN raw */ |
| 76 |
#define ASEM_PCI_OCR 0xfe |
| 77 |
|
| 78 |
/* |
| 79 |
* In the CDR register, you should set CBP to 1. |
| 80 |
* You will probably also want to set the clock divider value to 7 |
| 81 |
* (meaning direct oscillator output) because the second SJA1000 chip |
| 82 |
* is driven by the first one CLKOUT output. |
| 83 |
*/ |
| 84 |
#define PLX_PCI_CDR (CDR_CBP | CDR_CLKOUT_MASK) |
| 85 |
|
| 86 |
/* SJA1000 Control Register in the BasicCAN Mode */ |
| 87 |
#define REG_CR 0x00 |
| 88 |
|
| 89 |
/* States of some SJA1000 registers after hardware reset in the BasicCAN mode*/ |
| 90 |
#define REG_CR_BASICCAN_INITIAL 0x21 |
| 91 |
#define REG_CR_BASICCAN_INITIAL_MASK 0xa1 |
| 92 |
#define REG_SR_BASICCAN_INITIAL 0x0c |
| 93 |
#define REG_IR_BASICCAN_INITIAL 0xe0 |
| 94 |
|
| 95 |
/* States of some SJA1000 registers after hardware reset in the PeliCAN mode*/ |
| 96 |
#define REG_MOD_PELICAN_INITIAL 0x01 |
| 97 |
#define REG_SR_PELICAN_INITIAL 0x3c |
| 98 |
#define REG_IR_PELICAN_INITIAL 0x00 |
| 99 |
|
| 100 |
#define ADLINK_PCI_VENDOR_ID 0x144A |
| 101 |
#define ADLINK_PCI_DEVICE_ID 0x7841 |
| 102 |
|
| 103 |
#define ESD_PCI_SUB_SYS_ID_PCI200 0x0004 |
| 104 |
#define ESD_PCI_SUB_SYS_ID_PCI266 0x0009 |
| 105 |
#define ESD_PCI_SUB_SYS_ID_PMC266 0x000e |
| 106 |
#define ESD_PCI_SUB_SYS_ID_CPCI200 0x010b |
| 107 |
#define ESD_PCI_SUB_SYS_ID_PCIE2000 0x0200 |
| 108 |
#define ESD_PCI_SUB_SYS_ID_PCI104200 0x0501 |
| 109 |
|
| 110 |
#define CAN200PCI_DEVICE_ID 0x9030 |
| 111 |
#define CAN200PCI_VENDOR_ID 0x10b5 |
| 112 |
#define CAN200PCI_SUB_DEVICE_ID 0x0301 |
| 113 |
#define CAN200PCI_SUB_VENDOR_ID 0xe1c5 |
| 114 |
|
| 115 |
#define IXXAT_PCI_VENDOR_ID 0x10b5 |
| 116 |
#define IXXAT_PCI_DEVICE_ID 0x9050 |
| 117 |
#define IXXAT_PCI_SUB_SYS_ID 0x2540 |
| 118 |
|
| 119 |
#define MARATHON_PCI_DEVICE_ID 0x2715 |
| 120 |
#define MARATHON_PCIE_DEVICE_ID 0x3432 |
| 121 |
|
| 122 |
#define TEWS_PCI_VENDOR_ID 0x1498 |
| 123 |
#define TEWS_PCI_DEVICE_ID_TMPC810 0x032A |
| 124 |
|
| 125 |
#define CTI_PCI_DEVICE_ID_CRG001 0x0900 |
| 126 |
|
| 127 |
#define MOXA_PCI_VENDOR_ID 0x1393 |
| 128 |
#define MOXA_PCI_DEVICE_ID 0x0100 |
| 129 |
|
| 130 |
#define ASEM_RAW_CAN_VENDOR_ID 0x10b5 |
| 131 |
#define ASEM_RAW_CAN_DEVICE_ID 0x9030 |
| 132 |
#define ASEM_RAW_CAN_SUB_VENDOR_ID 0x3000 |
| 133 |
#define ASEM_RAW_CAN_SUB_DEVICE_ID 0x1001 |
| 134 |
#define ASEM_RAW_CAN_SUB_DEVICE_ID_BIS 0x1002 |
| 135 |
#define ASEM_RAW_CAN_RST_REGISTER 0x54 |
| 136 |
#define ASEM_RAW_CAN_RST_MASK_CAN1 0x20 |
| 137 |
#define ASEM_RAW_CAN_RST_MASK_CAN2 0x04 |
| 138 |
|
| 139 |
static void plx_pci_reset_common(struct pci_dev *pdev); |
| 140 |
static void plx9056_pci_reset_common(struct pci_dev *pdev); |
| 141 |
static void plx_pci_reset_marathon_pci(struct pci_dev *pdev); |
| 142 |
static void plx_pci_reset_marathon_pcie(struct pci_dev *pdev); |
| 143 |
static void plx_pci_reset_asem_dual_can_raw(struct pci_dev *pdev); |
| 144 |
|
| 145 |
struct plx_pci_channel_map { |
| 146 |
u32 bar; |
| 147 |
u32 offset; |
| 148 |
u32 size; /* 0x00 - auto, e.g. length of entire bar */ |
| 149 |
}; |
| 150 |
|
| 151 |
struct plx_pci_card_info { |
| 152 |
const char *name; |
| 153 |
int channel_count; |
| 154 |
u32 can_clock; |
| 155 |
u8 ocr; /* output control register */ |
| 156 |
u8 cdr; /* clock divider register */ |
| 157 |
|
| 158 |
/* Parameters for mapping local configuration space */ |
| 159 |
struct plx_pci_channel_map conf_map; |
| 160 |
|
| 161 |
/* Parameters for mapping the SJA1000 chips */ |
| 162 |
struct plx_pci_channel_map chan_map_tbl[PLX_PCI_MAX_CHAN]; |
| 163 |
|
| 164 |
/* Pointer to device-dependent reset function */ |
| 165 |
void (*reset_func)(struct pci_dev *pdev); |
| 166 |
}; |
| 167 |
|
| 168 |
static struct plx_pci_card_info plx_pci_card_info_adlink = { |
| 169 |
"Adlink PCI-7841/cPCI-7841", 2, |
| 170 |
PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR, |
| 171 |
{1, 0x00, 0x00}, { {2, 0x00, 0x80}, {2, 0x80, 0x80} }, |
| 172 |
&plx_pci_reset_common |
| 173 |
/* based on PLX9052 */ |
| 174 |
}; |
| 175 |
|
| 176 |
static struct plx_pci_card_info plx_pci_card_info_adlink_se = { |
| 177 |
"Adlink PCI-7841/cPCI-7841 SE", 2, |
| 178 |
PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR, |
| 179 |
{0, 0x00, 0x00}, { {2, 0x00, 0x80}, {2, 0x80, 0x80} }, |
| 180 |
&plx_pci_reset_common |
| 181 |
/* based on PLX9052 */ |
| 182 |
}; |
| 183 |
|
| 184 |
static struct plx_pci_card_info plx_pci_card_info_esd200 = { |
| 185 |
"esd CAN-PCI/CPCI/PCI104/200", 2, |
| 186 |
PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR, |
| 187 |
{0, 0x00, 0x00}, { {2, 0x00, 0x80}, {2, 0x100, 0x80} }, |
| 188 |
&plx_pci_reset_common |
| 189 |
/* based on PLX9030/9050 */ |
| 190 |
}; |
| 191 |
|
| 192 |
static struct plx_pci_card_info plx_pci_card_info_esd266 = { |
| 193 |
"esd CAN-PCI/PMC/266", 2, |
| 194 |
PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR, |
| 195 |
{0, 0x00, 0x00}, { {2, 0x00, 0x80}, {2, 0x100, 0x80} }, |
| 196 |
&plx9056_pci_reset_common |
| 197 |
/* based on PLX9056 */ |
| 198 |
}; |
| 199 |
|
| 200 |
static struct plx_pci_card_info plx_pci_card_info_esd2000 = { |
| 201 |
"esd CAN-PCIe/2000", 2, |
| 202 |
PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR, |
| 203 |
{0, 0x00, 0x00}, { {2, 0x00, 0x80}, {2, 0x100, 0x80} }, |
| 204 |
&plx9056_pci_reset_common |
| 205 |
/* based on PEX8311 */ |
| 206 |
}; |
| 207 |
|
| 208 |
static struct plx_pci_card_info plx_pci_card_info_ixxat = { |
| 209 |
"IXXAT PC-I 04/PCI", 2, |
| 210 |
PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR, |
| 211 |
{0, 0x00, 0x00}, { {2, 0x00, 0x80}, {2, 0x200, 0x80} }, |
| 212 |
&plx_pci_reset_common |
| 213 |
/* based on PLX9050 */ |
| 214 |
}; |
| 215 |
|
| 216 |
static struct plx_pci_card_info plx_pci_card_info_marathon_pci = { |
| 217 |
"Marathon CAN-bus-PCI", 2, |
| 218 |
PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR, |
| 219 |
{0, 0x00, 0x00}, { {2, 0x00, 0x00}, {4, 0x00, 0x00} }, |
| 220 |
&plx_pci_reset_marathon_pci |
| 221 |
/* based on PLX9052 */ |
| 222 |
}; |
| 223 |
|
| 224 |
static struct plx_pci_card_info plx_pci_card_info_marathon_pcie = { |
| 225 |
"Marathon CAN-bus-PCIe", 2, |
| 226 |
PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR, |
| 227 |
{0, 0x00, 0x00}, { {2, 0x00, 0x00}, {3, 0x80, 0x00} }, |
| 228 |
&plx_pci_reset_marathon_pcie |
| 229 |
/* based on PEX8311 */ |
| 230 |
}; |
| 231 |
|
| 232 |
static struct plx_pci_card_info plx_pci_card_info_tews = { |
| 233 |
"TEWS TECHNOLOGIES TPMC810", 2, |
| 234 |
PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR, |
| 235 |
{0, 0x00, 0x00}, { {2, 0x000, 0x80}, {2, 0x100, 0x80} }, |
| 236 |
&plx_pci_reset_common |
| 237 |
/* based on PLX9030 */ |
| 238 |
}; |
| 239 |
|
| 240 |
static struct plx_pci_card_info plx_pci_card_info_cti = { |
| 241 |
"Connect Tech Inc. CANpro/104-Plus Opto (CRG001)", 2, |
| 242 |
PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR, |
| 243 |
{0, 0x00, 0x00}, { {2, 0x000, 0x80}, {2, 0x100, 0x80} }, |
| 244 |
&plx_pci_reset_common |
| 245 |
/* based on PLX9030 */ |
| 246 |
}; |
| 247 |
|
| 248 |
static struct plx_pci_card_info plx_pci_card_info_elcus = { |
| 249 |
"Eclus CAN-200-PCI", 2, |
| 250 |
PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR, |
| 251 |
{1, 0x00, 0x00}, { {2, 0x00, 0x80}, {3, 0x00, 0x80} }, |
| 252 |
&plx_pci_reset_common |
| 253 |
/* based on PLX9030 */ |
| 254 |
}; |
| 255 |
|
| 256 |
static struct plx_pci_card_info plx_pci_card_info_moxa = { |
| 257 |
"MOXA", 2, |
| 258 |
PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR, |
| 259 |
{0, 0x00, 0x00}, { {0, 0x00, 0x80}, {1, 0x00, 0x80} }, |
| 260 |
&plx_pci_reset_common |
| 261 |
/* based on PLX9052 */ |
| 262 |
}; |
| 263 |
|
| 264 |
static struct plx_pci_card_info plx_pci_card_info_asem_dual_can = { |
| 265 |
"ASEM Dual CAN raw PCI", 2, |
| 266 |
PLX_PCI_CAN_CLOCK, ASEM_PCI_OCR, PLX_PCI_CDR, |
| 267 |
{0, 0x00, 0x00}, { {2, 0x00, 0x00}, {4, 0x00, 0x00} }, |
| 268 |
&plx_pci_reset_asem_dual_can_raw |
| 269 |
/* based on PLX9030 */ |
| 270 |
}; |
| 271 |
|
| 272 |
static const struct pci_device_id plx_pci_tbl[] = { |
| 273 |
{ |
| 274 |
/* Adlink PCI-7841/cPCI-7841 */ |
| 275 |
ADLINK_PCI_VENDOR_ID, ADLINK_PCI_DEVICE_ID, |
| 276 |
PCI_ANY_ID, PCI_ANY_ID, |
| 277 |
PCI_CLASS_NETWORK_OTHER << 8, ~0, |
| 278 |
(kernel_ulong_t)&plx_pci_card_info_adlink |
| 279 |
}, |
| 280 |
{ |
| 281 |
/* Adlink PCI-7841/cPCI-7841 SE */ |
| 282 |
ADLINK_PCI_VENDOR_ID, ADLINK_PCI_DEVICE_ID, |
| 283 |
PCI_ANY_ID, PCI_ANY_ID, |
| 284 |
PCI_CLASS_COMMUNICATION_OTHER << 8, ~0, |
| 285 |
(kernel_ulong_t)&plx_pci_card_info_adlink_se |
| 286 |
}, |
| 287 |
{ |
| 288 |
/* esd CAN-PCI/200 */ |
| 289 |
PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, |
| 290 |
PCI_VENDOR_ID_ESDGMBH, ESD_PCI_SUB_SYS_ID_PCI200, |
| 291 |
0, 0, |
| 292 |
(kernel_ulong_t)&plx_pci_card_info_esd200 |
| 293 |
}, |
| 294 |
{ |
| 295 |
/* esd CAN-CPCI/200 */ |
| 296 |
PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, |
| 297 |
PCI_VENDOR_ID_ESDGMBH, ESD_PCI_SUB_SYS_ID_CPCI200, |
| 298 |
0, 0, |
| 299 |
(kernel_ulong_t)&plx_pci_card_info_esd200 |
| 300 |
}, |
| 301 |
{ |
| 302 |
/* esd CAN-PCI104/200 */ |
| 303 |
PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, |
| 304 |
PCI_VENDOR_ID_ESDGMBH, ESD_PCI_SUB_SYS_ID_PCI104200, |
| 305 |
0, 0, |
| 306 |
(kernel_ulong_t)&plx_pci_card_info_esd200 |
| 307 |
}, |
| 308 |
{ |
| 309 |
/* esd CAN-PCI/266 */ |
| 310 |
PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9056, |
| 311 |
PCI_VENDOR_ID_ESDGMBH, ESD_PCI_SUB_SYS_ID_PCI266, |
| 312 |
0, 0, |
| 313 |
(kernel_ulong_t)&plx_pci_card_info_esd266 |
| 314 |
}, |
| 315 |
{ |
| 316 |
/* esd CAN-PMC/266 */ |
| 317 |
PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9056, |
| 318 |
PCI_VENDOR_ID_ESDGMBH, ESD_PCI_SUB_SYS_ID_PMC266, |
| 319 |
0, 0, |
| 320 |
(kernel_ulong_t)&plx_pci_card_info_esd266 |
| 321 |
}, |
| 322 |
{ |
| 323 |
/* esd CAN-PCIE/2000 */ |
| 324 |
PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9056, |
| 325 |
PCI_VENDOR_ID_ESDGMBH, ESD_PCI_SUB_SYS_ID_PCIE2000, |
| 326 |
0, 0, |
| 327 |
(kernel_ulong_t)&plx_pci_card_info_esd2000 |
| 328 |
}, |
| 329 |
{ |
| 330 |
/* IXXAT PC-I 04/PCI card */ |
| 331 |
IXXAT_PCI_VENDOR_ID, IXXAT_PCI_DEVICE_ID, |
| 332 |
PCI_ANY_ID, IXXAT_PCI_SUB_SYS_ID, |
| 333 |
0, 0, |
| 334 |
(kernel_ulong_t)&plx_pci_card_info_ixxat |
| 335 |
}, |
| 336 |
{ |
| 337 |
/* Marathon CAN-bus-PCI card */ |
| 338 |
PCI_VENDOR_ID_PLX, MARATHON_PCI_DEVICE_ID, |
| 339 |
PCI_ANY_ID, PCI_ANY_ID, |
| 340 |
0, 0, |
| 341 |
(kernel_ulong_t)&plx_pci_card_info_marathon_pci |
| 342 |
}, |
| 343 |
{ |
| 344 |
/* Marathon CAN-bus-PCIe card */ |
| 345 |
PCI_VENDOR_ID_PLX, MARATHON_PCIE_DEVICE_ID, |
| 346 |
PCI_ANY_ID, PCI_ANY_ID, |
| 347 |
0, 0, |
| 348 |
(kernel_ulong_t)&plx_pci_card_info_marathon_pcie |
| 349 |
}, |
| 350 |
{ |
| 351 |
/* TEWS TECHNOLOGIES TPMC810 card */ |
| 352 |
TEWS_PCI_VENDOR_ID, TEWS_PCI_DEVICE_ID_TMPC810, |
| 353 |
PCI_ANY_ID, PCI_ANY_ID, |
| 354 |
0, 0, |
| 355 |
(kernel_ulong_t)&plx_pci_card_info_tews |
| 356 |
}, |
| 357 |
{ |
| 358 |
/* Connect Tech Inc. CANpro/104-Plus Opto (CRG001) card */ |
| 359 |
PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, |
| 360 |
PCI_SUBVENDOR_ID_CONNECT_TECH, CTI_PCI_DEVICE_ID_CRG001, |
| 361 |
0, 0, |
| 362 |
(kernel_ulong_t)&plx_pci_card_info_cti |
| 363 |
}, |
| 364 |
{ |
| 365 |
/* Elcus CAN-200-PCI */ |
| 366 |
CAN200PCI_VENDOR_ID, CAN200PCI_DEVICE_ID, |
| 367 |
CAN200PCI_SUB_VENDOR_ID, CAN200PCI_SUB_DEVICE_ID, |
| 368 |
0, 0, |
| 369 |
(kernel_ulong_t)&plx_pci_card_info_elcus |
| 370 |
}, |
| 371 |
{ |
| 372 |
/* moxa */ |
| 373 |
MOXA_PCI_VENDOR_ID, MOXA_PCI_DEVICE_ID, |
| 374 |
PCI_ANY_ID, PCI_ANY_ID, |
| 375 |
0, 0, |
| 376 |
(kernel_ulong_t)&plx_pci_card_info_moxa |
| 377 |
}, |
| 378 |
{ |
| 379 |
/* ASEM Dual CAN raw */ |
| 380 |
ASEM_RAW_CAN_VENDOR_ID, ASEM_RAW_CAN_DEVICE_ID, |
| 381 |
ASEM_RAW_CAN_SUB_VENDOR_ID, ASEM_RAW_CAN_SUB_DEVICE_ID, |
| 382 |
0, 0, |
| 383 |
(kernel_ulong_t)&plx_pci_card_info_asem_dual_can |
| 384 |
}, |
| 385 |
{ |
| 386 |
/* ASEM Dual CAN raw -new model */ |
| 387 |
ASEM_RAW_CAN_VENDOR_ID, ASEM_RAW_CAN_DEVICE_ID, |
| 388 |
ASEM_RAW_CAN_SUB_VENDOR_ID, ASEM_RAW_CAN_SUB_DEVICE_ID_BIS, |
| 389 |
0, 0, |
| 390 |
(kernel_ulong_t)&plx_pci_card_info_asem_dual_can |
| 391 |
}, |
| 392 |
{ 0,} |
| 393 |
}; |
| 394 |
MODULE_DEVICE_TABLE(pci, plx_pci_tbl); |
| 395 |
|
| 396 |
static u8 plx_pci_read_reg(const struct sja1000_priv *priv, int port) |
| 397 |
{ |
| 398 |
return ioread8(priv->reg_base + port); |
| 399 |
} |
| 400 |
|
| 401 |
static void plx_pci_write_reg(const struct sja1000_priv *priv, int port, u8 val) |
| 402 |
{ |
| 403 |
iowrite8(val, priv->reg_base + port); |
| 404 |
} |
| 405 |
|
| 406 |
/* |
| 407 |
* Check if a CAN controller is present at the specified location |
| 408 |
* by trying to switch 'em from the Basic mode into the PeliCAN mode. |
| 409 |
* Also check states of some registers in reset mode. |
| 410 |
*/ |
| 411 |
static inline int plx_pci_check_sja1000(const struct sja1000_priv *priv) |
| 412 |
{ |
| 413 |
int flag = 0; |
| 414 |
|
| 415 |
/* |
| 416 |
* Check registers after hardware reset (the Basic mode) |
| 417 |
* See states on p. 10 of the Datasheet. |
| 418 |
*/ |
| 419 |
if ((priv->read_reg(priv, REG_CR) & REG_CR_BASICCAN_INITIAL_MASK) == |
| 420 |
REG_CR_BASICCAN_INITIAL && |
| 421 |
(priv->read_reg(priv, SJA1000_SR) == REG_SR_BASICCAN_INITIAL) && |
| 422 |
(priv->read_reg(priv, SJA1000_IR) == REG_IR_BASICCAN_INITIAL)) |
| 423 |
flag = 1; |
| 424 |
|
| 425 |
/* Bring the SJA1000 into the PeliCAN mode*/ |
| 426 |
priv->write_reg(priv, SJA1000_CDR, CDR_PELICAN); |
| 427 |
|
| 428 |
/* |
| 429 |
* Check registers after reset in the PeliCAN mode. |
| 430 |
* See states on p. 23 of the Datasheet. |
| 431 |
*/ |
| 432 |
if (priv->read_reg(priv, SJA1000_MOD) == REG_MOD_PELICAN_INITIAL && |
| 433 |
priv->read_reg(priv, SJA1000_SR) == REG_SR_PELICAN_INITIAL && |
| 434 |
priv->read_reg(priv, SJA1000_IR) == REG_IR_PELICAN_INITIAL) |
| 435 |
return flag; |
| 436 |
|
| 437 |
return 0; |
| 438 |
} |
| 439 |
|
| 440 |
/* |
| 441 |
* PLX9030/50/52 software reset |
| 442 |
* Also LRESET# asserts and brings to reset device on the Local Bus (if wired). |
| 443 |
* For most cards it's enough for reset the SJA1000 chips. |
| 444 |
*/ |
| 445 |
static void plx_pci_reset_common(struct pci_dev *pdev) |
| 446 |
{ |
| 447 |
struct plx_pci_card *card = pci_get_drvdata(pdev); |
| 448 |
u32 cntrl; |
| 449 |
|
| 450 |
cntrl = ioread32(card->conf_addr + PLX_CNTRL); |
| 451 |
cntrl |= PLX_PCI_RESET; |
| 452 |
iowrite32(cntrl, card->conf_addr + PLX_CNTRL); |
| 453 |
udelay(100); |
| 454 |
cntrl ^= PLX_PCI_RESET; |
| 455 |
iowrite32(cntrl, card->conf_addr + PLX_CNTRL); |
| 456 |
}; |
| 457 |
|
| 458 |
/* |
| 459 |
* PLX9056 software reset |
| 460 |
* Assert LRESET# and reset device(s) on the Local Bus (if wired). |
| 461 |
*/ |
| 462 |
static void plx9056_pci_reset_common(struct pci_dev *pdev) |
| 463 |
{ |
| 464 |
struct plx_pci_card *card = pci_get_drvdata(pdev); |
| 465 |
u32 cntrl; |
| 466 |
|
| 467 |
/* issue a local bus reset */ |
| 468 |
cntrl = ioread32(card->conf_addr + PLX9056_CNTRL); |
| 469 |
cntrl |= PLX_PCI_RESET; |
| 470 |
iowrite32(cntrl, card->conf_addr + PLX9056_CNTRL); |
| 471 |
udelay(100); |
| 472 |
cntrl ^= PLX_PCI_RESET; |
| 473 |
iowrite32(cntrl, card->conf_addr + PLX9056_CNTRL); |
| 474 |
|
| 475 |
/* reload local configuration from EEPROM */ |
| 476 |
cntrl |= PLX9056_PCI_RCR; |
| 477 |
iowrite32(cntrl, card->conf_addr + PLX9056_CNTRL); |
| 478 |
|
| 479 |
/* |
| 480 |
* There is no safe way to poll for the end |
| 481 |
* of reconfiguration process. Waiting for 10ms |
| 482 |
* is safe. |
| 483 |
*/ |
| 484 |
mdelay(10); |
| 485 |
|
| 486 |
cntrl ^= PLX9056_PCI_RCR; |
| 487 |
iowrite32(cntrl, card->conf_addr + PLX9056_CNTRL); |
| 488 |
}; |
| 489 |
|
| 490 |
/* Special reset function for Marathon CAN-bus-PCI card */ |
| 491 |
static void plx_pci_reset_marathon_pci(struct pci_dev *pdev) |
| 492 |
{ |
| 493 |
void __iomem *reset_addr; |
| 494 |
int i; |
| 495 |
static const int reset_bar[2] = {3, 5}; |
| 496 |
|
| 497 |
plx_pci_reset_common(pdev); |
| 498 |
|
| 499 |
for (i = 0; i < 2; i++) { |
| 500 |
reset_addr = pci_iomap(pdev, reset_bar[i], 0); |
| 501 |
if (!reset_addr) { |
| 502 |
dev_err(&pdev->dev, "Failed to remap reset " |
| 503 |
"space %d (BAR%d)\n", i, reset_bar[i]); |
| 504 |
} else { |
| 505 |
/* reset the SJA1000 chip */ |
| 506 |
iowrite8(0x1, reset_addr); |
| 507 |
udelay(100); |
| 508 |
pci_iounmap(pdev, reset_addr); |
| 509 |
} |
| 510 |
} |
| 511 |
} |
| 512 |
|
| 513 |
/* Special reset function for Marathon CAN-bus-PCIe card */ |
| 514 |
static void plx_pci_reset_marathon_pcie(struct pci_dev *pdev) |
| 515 |
{ |
| 516 |
void __iomem *addr; |
| 517 |
void __iomem *reset_addr; |
| 518 |
int i; |
| 519 |
|
| 520 |
plx9056_pci_reset_common(pdev); |
| 521 |
|
| 522 |
for (i = 0; i < 2; i++) { |
| 523 |
struct plx_pci_channel_map *chan_map = |
| 524 |
&plx_pci_card_info_marathon_pcie.chan_map_tbl[i]; |
| 525 |
addr = pci_iomap(pdev, chan_map->bar, chan_map->size); |
| 526 |
if (!addr) { |
| 527 |
dev_err(&pdev->dev, "Failed to remap reset " |
| 528 |
"space %d (BAR%d)\n", i, chan_map->bar); |
| 529 |
} else { |
| 530 |
/* reset the SJA1000 chip */ |
| 531 |
#define MARATHON_PCIE_RESET_OFFSET 32 |
| 532 |
reset_addr = addr + chan_map->offset + |
| 533 |
MARATHON_PCIE_RESET_OFFSET; |
| 534 |
iowrite8(0x1, reset_addr); |
| 535 |
udelay(100); |
| 536 |
pci_iounmap(pdev, addr); |
| 537 |
} |
| 538 |
} |
| 539 |
} |
| 540 |
|
| 541 |
/* Special reset function for ASEM Dual CAN raw card */ |
| 542 |
static void plx_pci_reset_asem_dual_can_raw(struct pci_dev *pdev) |
| 543 |
{ |
| 544 |
void __iomem *bar0_addr; |
| 545 |
u8 tmpval; |
| 546 |
|
| 547 |
plx_pci_reset_common(pdev); |
| 548 |
|
| 549 |
bar0_addr = pci_iomap(pdev, 0, 0); |
| 550 |
if (!bar0_addr) { |
| 551 |
dev_err(&pdev->dev, "Failed to remap reset space 0 (BAR0)\n"); |
| 552 |
return; |
| 553 |
} |
| 554 |
|
| 555 |
/* reset the two SJA1000 chips */ |
| 556 |
tmpval = ioread8(bar0_addr + ASEM_RAW_CAN_RST_REGISTER); |
| 557 |
tmpval &= ~(ASEM_RAW_CAN_RST_MASK_CAN1 | ASEM_RAW_CAN_RST_MASK_CAN2); |
| 558 |
iowrite8(tmpval, bar0_addr + ASEM_RAW_CAN_RST_REGISTER); |
| 559 |
usleep_range(300, 400); |
| 560 |
tmpval |= ASEM_RAW_CAN_RST_MASK_CAN1 | ASEM_RAW_CAN_RST_MASK_CAN2; |
| 561 |
iowrite8(tmpval, bar0_addr + ASEM_RAW_CAN_RST_REGISTER); |
| 562 |
usleep_range(300, 400); |
| 563 |
pci_iounmap(pdev, bar0_addr); |
| 564 |
} |
| 565 |
|
| 566 |
static void plx_pci_del_card(struct pci_dev *pdev) |
| 567 |
{ |
| 568 |
struct plx_pci_card *card = pci_get_drvdata(pdev); |
| 569 |
struct net_device *dev; |
| 570 |
struct sja1000_priv *priv; |
| 571 |
int i = 0; |
| 572 |
|
| 573 |
for (i = 0; i < PLX_PCI_MAX_CHAN; i++) { |
| 574 |
dev = card->net_dev[i]; |
| 575 |
if (!dev) |
| 576 |
continue; |
| 577 |
|
| 578 |
dev_info(&pdev->dev, "Removing %s\n", dev->name); |
| 579 |
unregister_sja1000dev(dev); |
| 580 |
priv = netdev_priv(dev); |
| 581 |
if (priv->reg_base) |
| 582 |
pci_iounmap(pdev, priv->reg_base); |
| 583 |
free_sja1000dev(dev); |
| 584 |
} |
| 585 |
|
| 586 |
card->reset_func(pdev); |
| 587 |
|
| 588 |
/* |
| 589 |
* Disable interrupts from PCI-card and disable local |
| 590 |
* interrupts |
| 591 |
*/ |
| 592 |
if (pdev->device != PCI_DEVICE_ID_PLX_9056 && |
| 593 |
pdev->device != MARATHON_PCIE_DEVICE_ID) |
| 594 |
iowrite32(0x0, card->conf_addr + PLX_INTCSR); |
| 595 |
else |
| 596 |
iowrite32(0x0, card->conf_addr + PLX9056_INTCSR); |
| 597 |
|
| 598 |
if (card->conf_addr) |
| 599 |
pci_iounmap(pdev, card->conf_addr); |
| 600 |
|
| 601 |
kfree(card); |
| 602 |
|
| 603 |
pci_disable_device(pdev); |
| 604 |
} |
| 605 |
|
| 606 |
/* |
| 607 |
* Probe PLX90xx based device for the SJA1000 chips and register each |
| 608 |
* available CAN channel to SJA1000 Socket-CAN subsystem. |
| 609 |
*/ |
| 610 |
static int plx_pci_add_card(struct pci_dev *pdev, |
| 611 |
const struct pci_device_id *ent) |
| 612 |
{ |
| 613 |
struct sja1000_priv *priv; |
| 614 |
struct net_device *dev; |
| 615 |
struct plx_pci_card *card; |
| 616 |
struct plx_pci_card_info *ci; |
| 617 |
int err, i; |
| 618 |
u32 val; |
| 619 |
void __iomem *addr; |
| 620 |
|
| 621 |
ci = (struct plx_pci_card_info *)ent->driver_data; |
| 622 |
|
| 623 |
if (pci_enable_device(pdev) < 0) { |
| 624 |
dev_err(&pdev->dev, "Failed to enable PCI device\n"); |
| 625 |
return -ENODEV; |
| 626 |
} |
| 627 |
|
| 628 |
dev_info(&pdev->dev, "Detected \"%s\" card at slot #%i\n", |
| 629 |
ci->name, PCI_SLOT(pdev->devfn)); |
| 630 |
|
| 631 |
/* Allocate card structures to hold addresses, ... */ |
| 632 |
card = kzalloc_obj(*card); |
| 633 |
if (!card) { |
| 634 |
pci_disable_device(pdev); |
| 635 |
return -ENOMEM; |
| 636 |
} |
| 637 |
|
| 638 |
pci_set_drvdata(pdev, card); |
| 639 |
|
| 640 |
card->channels = 0; |
| 641 |
|
| 642 |
/* Remap PLX90xx configuration space */ |
| 643 |
addr = pci_iomap(pdev, ci->conf_map.bar, ci->conf_map.size); |
| 644 |
if (!addr) { |
| 645 |
err = -ENOMEM; |
| 646 |
dev_err(&pdev->dev, "Failed to remap configuration space " |
| 647 |
"(BAR%d)\n", ci->conf_map.bar); |
| 648 |
goto failure_cleanup; |
| 649 |
} |
| 650 |
card->conf_addr = addr + ci->conf_map.offset; |
| 651 |
|
| 652 |
ci->reset_func(pdev); |
| 653 |
card->reset_func = ci->reset_func; |
| 654 |
|
| 655 |
/* Detect available channels */ |
| 656 |
for (i = 0; i < ci->channel_count; i++) { |
| 657 |
struct plx_pci_channel_map *cm = &ci->chan_map_tbl[i]; |
| 658 |
|
| 659 |
dev = alloc_sja1000dev(0); |
| 660 |
if (!dev) { |
| 661 |
err = -ENOMEM; |
| 662 |
goto failure_cleanup; |
| 663 |
} |
| 664 |
|
| 665 |
card->net_dev[i] = dev; |
| 666 |
priv = netdev_priv(dev); |
| 667 |
priv->priv = card; |
| 668 |
priv->irq_flags = IRQF_SHARED; |
| 669 |
|
| 670 |
dev->irq = pdev->irq; |
| 671 |
|
| 672 |
/* |
| 673 |
* Remap IO space of the SJA1000 chips |
| 674 |
* This is device-dependent mapping |
| 675 |
*/ |
| 676 |
addr = pci_iomap(pdev, cm->bar, cm->size); |
| 677 |
if (!addr) { |
| 678 |
err = -ENOMEM; |
| 679 |
dev_err(&pdev->dev, "Failed to remap BAR%d\n", cm->bar); |
| 680 |
goto failure_cleanup; |
| 681 |
} |
| 682 |
|
| 683 |
priv->reg_base = addr + cm->offset; |
| 684 |
priv->read_reg = plx_pci_read_reg; |
| 685 |
priv->write_reg = plx_pci_write_reg; |
| 686 |
|
| 687 |
/* Check if channel is present */ |
| 688 |
if (plx_pci_check_sja1000(priv)) { |
| 689 |
priv->can.clock.freq = ci->can_clock; |
| 690 |
priv->ocr = ci->ocr; |
| 691 |
priv->cdr = ci->cdr; |
| 692 |
|
| 693 |
SET_NETDEV_DEV(dev, &pdev->dev); |
| 694 |
dev->dev_id = i; |
| 695 |
|
| 696 |
/* Register SJA1000 device */ |
| 697 |
err = register_sja1000dev(dev); |
| 698 |
if (err) { |
| 699 |
dev_err(&pdev->dev, "Registering device failed " |
| 700 |
"(err=%d)\n", err); |
| 701 |
goto failure_cleanup; |
| 702 |
} |
| 703 |
|
| 704 |
card->channels++; |
| 705 |
|
| 706 |
dev_info(&pdev->dev, "Channel #%d at 0x%p, irq %d " |
| 707 |
"registered as %s\n", i + 1, priv->reg_base, |
| 708 |
dev->irq, dev->name); |
| 709 |
} else { |
| 710 |
dev_err(&pdev->dev, "Channel #%d not detected\n", |
| 711 |
i + 1); |
| 712 |
free_sja1000dev(dev); |
| 713 |
card->net_dev[i] = NULL; |
| 714 |
} |
| 715 |
} |
| 716 |
|
| 717 |
if (!card->channels) { |
| 718 |
err = -ENODEV; |
| 719 |
goto failure_cleanup; |
| 720 |
} |
| 721 |
|
| 722 |
/* |
| 723 |
* Enable interrupts from PCI-card (PLX90xx) and enable Local_1, |
| 724 |
* Local_2 interrupts from the SJA1000 chips |
| 725 |
*/ |
| 726 |
if (pdev->device != PCI_DEVICE_ID_PLX_9056 && |
| 727 |
pdev->device != MARATHON_PCIE_DEVICE_ID) { |
| 728 |
val = ioread32(card->conf_addr + PLX_INTCSR); |
| 729 |
if (pdev->subsystem_vendor == PCI_VENDOR_ID_ESDGMBH) |
| 730 |
val |= PLX_LINT1_EN | PLX_PCI_INT_EN; |
| 731 |
else |
| 732 |
val |= PLX_LINT1_EN | PLX_LINT2_EN | PLX_PCI_INT_EN; |
| 733 |
iowrite32(val, card->conf_addr + PLX_INTCSR); |
| 734 |
} else { |
| 735 |
iowrite32(PLX9056_LINTI | PLX9056_PCI_INT_EN, |
| 736 |
card->conf_addr + PLX9056_INTCSR); |
| 737 |
} |
| 738 |
return 0; |
| 739 |
|
| 740 |
failure_cleanup: |
| 741 |
dev_err(&pdev->dev, "Error: %d. Cleaning Up.\n", err); |
| 742 |
|
| 743 |
plx_pci_del_card(pdev); |
| 744 |
|
| 745 |
return err; |
| 746 |
} |
| 747 |
|
| 748 |
static struct pci_driver plx_pci_driver = { |
| 749 |
.name = DRV_NAME, |
| 750 |
.id_table = plx_pci_tbl, |
| 751 |
.probe = plx_pci_add_card, |
| 752 |
.remove = plx_pci_del_card, |
| 753 |
}; |
| 754 |
|
| 755 |
module_pci_driver(plx_pci_driver); |