| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* Copyright (C) 2007, 2011 Wolfgang Grandegger <[email protected]> |
| 4 |
* |
| 5 |
* Derived from the PCAN project file driver/src/pcan_pci.c: |
| 6 |
* |
| 7 |
* Copyright (C) 2001-2025 PEAK System-Technik GmbH |
| 8 |
* Author: Stéphane Grosjean <[email protected]> |
| 9 |
*/ |
| 10 |
|
| 11 |
#include <linux/kernel.h> |
| 12 |
#include <linux/module.h> |
| 13 |
#include <linux/interrupt.h> |
| 14 |
#include <linux/netdevice.h> |
| 15 |
#include <linux/delay.h> |
| 16 |
#include <linux/pci.h> |
| 17 |
#include <linux/io.h> |
| 18 |
#include <linux/i2c.h> |
| 19 |
#include <linux/i2c-algo-bit.h> |
| 20 |
#include <linux/can.h> |
| 21 |
#include <linux/can/dev.h> |
| 22 |
|
| 23 |
#include "sja1000.h" |
| 24 |
|
| 25 |
MODULE_AUTHOR("Stéphane Grosjean <[email protected]>"); |
| 26 |
MODULE_DESCRIPTION("Socket-CAN driver for PEAK PCAN PCI family cards"); |
| 27 |
MODULE_LICENSE("GPL v2"); |
| 28 |
|
| 29 |
#define DRV_NAME "peak_pci" |
| 30 |
|
| 31 |
/* FPGA cards FW version registers */ |
| 32 |
#define PEAK_VER_REG1 0x40 |
| 33 |
#define PEAK_VER_REG2 0x44 |
| 34 |
|
| 35 |
struct peak_pciec_card; |
| 36 |
struct peak_pci_chan { |
| 37 |
void __iomem *cfg_base; /* Common for all channels */ |
| 38 |
struct net_device *prev_dev; /* Chain of network devices */ |
| 39 |
u16 icr_mask; /* Interrupt mask for fast ack */ |
| 40 |
struct peak_pciec_card *pciec_card; /* only for PCIeC LEDs */ |
| 41 |
}; |
| 42 |
|
| 43 |
#define PEAK_PCI_CAN_CLOCK (16000000 / 2) |
| 44 |
|
| 45 |
#define PEAK_PCI_CDR (CDR_CBP | CDR_CLKOUT_MASK) |
| 46 |
#define PEAK_PCI_OCR OCR_TX0_PUSHPULL |
| 47 |
|
| 48 |
/* Important PITA registers */ |
| 49 |
#define PITA_ICR 0x00 /* Interrupt control register */ |
| 50 |
#define PITA_GPIOICR 0x18 /* GPIO interface control register */ |
| 51 |
#define PITA_MISC 0x1C /* Miscellaneous register */ |
| 52 |
|
| 53 |
#define PEAK_PCI_CFG_SIZE 0x1000 /* Size of the config PCI bar */ |
| 54 |
#define PEAK_PCI_CHAN_SIZE 0x0400 /* Size used by the channel */ |
| 55 |
|
| 56 |
#define PEAK_PCI_VENDOR_ID 0x001C /* The PCI device and vendor IDs */ |
| 57 |
#define PEAK_PCI_DEVICE_ID 0x0001 /* for PCI/PCIe slot cards */ |
| 58 |
#define PEAK_PCIEC_DEVICE_ID 0x0002 /* for ExpressCard slot cards */ |
| 59 |
#define PEAK_PCIE_DEVICE_ID 0x0003 /* for nextgen PCIe slot cards */ |
| 60 |
#define PEAK_CPCI_DEVICE_ID 0x0004 /* for nextgen cPCI slot cards */ |
| 61 |
#define PEAK_MPCI_DEVICE_ID 0x0005 /* for nextgen miniPCI slot cards */ |
| 62 |
#define PEAK_PC_104P_DEVICE_ID 0x0006 /* PCAN-PC/104+ cards */ |
| 63 |
#define PEAK_PCI_104E_DEVICE_ID 0x0007 /* PCAN-PCI/104 Express cards */ |
| 64 |
#define PEAK_MPCIE_DEVICE_ID 0x0008 /* The miniPCIe slot cards */ |
| 65 |
#define PEAK_PCIE_OEM_ID 0x0009 /* PCAN-PCI Express OEM */ |
| 66 |
#define PEAK_PCIEC34_DEVICE_ID 0x000A /* PCAN-PCI Express 34 (one channel) */ |
| 67 |
|
| 68 |
#define PEAK_PCI_CHAN_MAX 4 |
| 69 |
|
| 70 |
static const u16 peak_pci_icr_masks[PEAK_PCI_CHAN_MAX] = { |
| 71 |
0x02, 0x01, 0x40, 0x80 |
| 72 |
}; |
| 73 |
|
| 74 |
static const struct pci_device_id peak_pci_tbl[] = { |
| 75 |
{ |
| 76 |
PEAK_PCI_VENDOR_ID, PEAK_PCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, |
| 77 |
.driver_data = (kernel_ulong_t)"PCAN-PCI", |
| 78 |
}, { |
| 79 |
PEAK_PCI_VENDOR_ID, PEAK_PCIE_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, |
| 80 |
.driver_data = (kernel_ulong_t)"PCAN-PCI Express", |
| 81 |
}, { |
| 82 |
PEAK_PCI_VENDOR_ID, PEAK_MPCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, |
| 83 |
.driver_data = (kernel_ulong_t)"PCAN-miniPCI", |
| 84 |
}, { |
| 85 |
PEAK_PCI_VENDOR_ID, PEAK_MPCIE_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, |
| 86 |
.driver_data = (kernel_ulong_t)"PCAN-miniPCIe", |
| 87 |
}, { |
| 88 |
PEAK_PCI_VENDOR_ID, PEAK_PC_104P_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, |
| 89 |
.driver_data = (kernel_ulong_t)"PCAN-PC/104-Plus Quad", |
| 90 |
}, { |
| 91 |
PEAK_PCI_VENDOR_ID, PEAK_PCI_104E_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, |
| 92 |
.driver_data = (kernel_ulong_t)"PCAN-PCI/104-Express", |
| 93 |
}, { |
| 94 |
PEAK_PCI_VENDOR_ID, PEAK_CPCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, |
| 95 |
.driver_data = (kernel_ulong_t)"PCAN-cPCI", |
| 96 |
}, { |
| 97 |
PEAK_PCI_VENDOR_ID, PEAK_PCIE_OEM_ID, PCI_ANY_ID, PCI_ANY_ID, |
| 98 |
.driver_data = (kernel_ulong_t)"PCAN-Chip PCIe", |
| 99 |
}, |
| 100 |
#ifdef CONFIG_CAN_PEAK_PCIEC |
| 101 |
{ |
| 102 |
PEAK_PCI_VENDOR_ID, PEAK_PCIEC_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, |
| 103 |
.driver_data = (kernel_ulong_t)"PCAN-ExpressCard", |
| 104 |
}, { |
| 105 |
PEAK_PCI_VENDOR_ID, PEAK_PCIEC34_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, |
| 106 |
.driver_data = (kernel_ulong_t)"PCAN-ExpressCard 34", |
| 107 |
}, |
| 108 |
#endif |
| 109 |
{ /* sentinel */ } |
| 110 |
}; |
| 111 |
|
| 112 |
MODULE_DEVICE_TABLE(pci, peak_pci_tbl); |
| 113 |
|
| 114 |
#ifdef CONFIG_CAN_PEAK_PCIEC |
| 115 |
/* PCAN-ExpressCard needs I2C bit-banging configuration option. */ |
| 116 |
|
| 117 |
/* GPIOICR byte access offsets */ |
| 118 |
#define PITA_GPOUT 0x18 /* GPx output value */ |
| 119 |
#define PITA_GPIN 0x19 /* GPx input value */ |
| 120 |
#define PITA_GPOEN 0x1A /* configure GPx as output pin */ |
| 121 |
|
| 122 |
/* I2C GP bits */ |
| 123 |
#define PITA_GPIN_SCL 0x01 /* Serial Clock Line */ |
| 124 |
#define PITA_GPIN_SDA 0x04 /* Serial DAta line */ |
| 125 |
|
| 126 |
#define PCA9553_1_SLAVEADDR (0xC4 >> 1) |
| 127 |
|
| 128 |
/* PCA9553 LS0 fields values */ |
| 129 |
enum { |
| 130 |
PCA9553_LOW, |
| 131 |
PCA9553_HIGHZ, |
| 132 |
PCA9553_PWM0, |
| 133 |
PCA9553_PWM1 |
| 134 |
}; |
| 135 |
|
| 136 |
/* LEDs control */ |
| 137 |
#define PCA9553_ON PCA9553_LOW |
| 138 |
#define PCA9553_OFF PCA9553_HIGHZ |
| 139 |
#define PCA9553_SLOW PCA9553_PWM0 |
| 140 |
#define PCA9553_FAST PCA9553_PWM1 |
| 141 |
|
| 142 |
#define PCA9553_LED(c) (1 << (c)) |
| 143 |
#define PCA9553_LED_STATE(s, c) ((s) << ((c) << 1)) |
| 144 |
|
| 145 |
#define PCA9553_LED_ON(c) PCA9553_LED_STATE(PCA9553_ON, c) |
| 146 |
#define PCA9553_LED_OFF(c) PCA9553_LED_STATE(PCA9553_OFF, c) |
| 147 |
#define PCA9553_LED_SLOW(c) PCA9553_LED_STATE(PCA9553_SLOW, c) |
| 148 |
#define PCA9553_LED_FAST(c) PCA9553_LED_STATE(PCA9553_FAST, c) |
| 149 |
#define PCA9553_LED_MASK(c) PCA9553_LED_STATE(0x03, c) |
| 150 |
|
| 151 |
#define PCA9553_LED_OFF_ALL (PCA9553_LED_OFF(0) | PCA9553_LED_OFF(1)) |
| 152 |
|
| 153 |
#define PCA9553_LS0_INIT 0x40 /* initial value (!= from 0x00) */ |
| 154 |
|
| 155 |
struct peak_pciec_chan { |
| 156 |
struct net_device *netdev; |
| 157 |
unsigned long prev_rx_bytes; |
| 158 |
unsigned long prev_tx_bytes; |
| 159 |
}; |
| 160 |
|
| 161 |
struct peak_pciec_card { |
| 162 |
void __iomem *cfg_base; /* Common for all channels */ |
| 163 |
void __iomem *reg_base; /* first channel base address */ |
| 164 |
u8 led_cache; /* leds state cache */ |
| 165 |
|
| 166 |
/* PCIExpressCard i2c data */ |
| 167 |
struct i2c_algo_bit_data i2c_bit; |
| 168 |
struct i2c_adapter led_chip; |
| 169 |
struct delayed_work led_work; /* led delayed work */ |
| 170 |
int chan_count; |
| 171 |
struct peak_pciec_chan channel[PEAK_PCI_CHAN_MAX]; |
| 172 |
}; |
| 173 |
|
| 174 |
/* "normal" pci register write callback is overloaded for leds control */ |
| 175 |
static void peak_pci_write_reg(const struct sja1000_priv *priv, |
| 176 |
int port, u8 val); |
| 177 |
|
| 178 |
static inline void pita_set_scl_highz(struct peak_pciec_card *card) |
| 179 |
{ |
| 180 |
u8 gp_outen = readb(card->cfg_base + PITA_GPOEN) & ~PITA_GPIN_SCL; |
| 181 |
|
| 182 |
writeb(gp_outen, card->cfg_base + PITA_GPOEN); |
| 183 |
} |
| 184 |
|
| 185 |
static inline void pita_set_sda_highz(struct peak_pciec_card *card) |
| 186 |
{ |
| 187 |
u8 gp_outen = readb(card->cfg_base + PITA_GPOEN) & ~PITA_GPIN_SDA; |
| 188 |
|
| 189 |
writeb(gp_outen, card->cfg_base + PITA_GPOEN); |
| 190 |
} |
| 191 |
|
| 192 |
static void peak_pciec_init_pita_gpio(struct peak_pciec_card *card) |
| 193 |
{ |
| 194 |
/* raise SCL & SDA GPIOs to high-Z */ |
| 195 |
pita_set_scl_highz(card); |
| 196 |
pita_set_sda_highz(card); |
| 197 |
} |
| 198 |
|
| 199 |
static void pita_setsda(void *data, int state) |
| 200 |
{ |
| 201 |
struct peak_pciec_card *card = (struct peak_pciec_card *)data; |
| 202 |
u8 gp_out, gp_outen; |
| 203 |
|
| 204 |
/* set output sda always to 0 */ |
| 205 |
gp_out = readb(card->cfg_base + PITA_GPOUT) & ~PITA_GPIN_SDA; |
| 206 |
writeb(gp_out, card->cfg_base + PITA_GPOUT); |
| 207 |
|
| 208 |
/* control output sda with GPOEN */ |
| 209 |
gp_outen = readb(card->cfg_base + PITA_GPOEN); |
| 210 |
if (state) |
| 211 |
gp_outen &= ~PITA_GPIN_SDA; |
| 212 |
else |
| 213 |
gp_outen |= PITA_GPIN_SDA; |
| 214 |
|
| 215 |
writeb(gp_outen, card->cfg_base + PITA_GPOEN); |
| 216 |
} |
| 217 |
|
| 218 |
static void pita_setscl(void *data, int state) |
| 219 |
{ |
| 220 |
struct peak_pciec_card *card = (struct peak_pciec_card *)data; |
| 221 |
u8 gp_out, gp_outen; |
| 222 |
|
| 223 |
/* set output scl always to 0 */ |
| 224 |
gp_out = readb(card->cfg_base + PITA_GPOUT) & ~PITA_GPIN_SCL; |
| 225 |
writeb(gp_out, card->cfg_base + PITA_GPOUT); |
| 226 |
|
| 227 |
/* control output scl with GPOEN */ |
| 228 |
gp_outen = readb(card->cfg_base + PITA_GPOEN); |
| 229 |
if (state) |
| 230 |
gp_outen &= ~PITA_GPIN_SCL; |
| 231 |
else |
| 232 |
gp_outen |= PITA_GPIN_SCL; |
| 233 |
|
| 234 |
writeb(gp_outen, card->cfg_base + PITA_GPOEN); |
| 235 |
} |
| 236 |
|
| 237 |
static int pita_getsda(void *data) |
| 238 |
{ |
| 239 |
struct peak_pciec_card *card = (struct peak_pciec_card *)data; |
| 240 |
|
| 241 |
/* set tristate */ |
| 242 |
pita_set_sda_highz(card); |
| 243 |
|
| 244 |
return (readb(card->cfg_base + PITA_GPIN) & PITA_GPIN_SDA) ? 1 : 0; |
| 245 |
} |
| 246 |
|
| 247 |
static int pita_getscl(void *data) |
| 248 |
{ |
| 249 |
struct peak_pciec_card *card = (struct peak_pciec_card *)data; |
| 250 |
|
| 251 |
/* set tristate */ |
| 252 |
pita_set_scl_highz(card); |
| 253 |
|
| 254 |
return (readb(card->cfg_base + PITA_GPIN) & PITA_GPIN_SCL) ? 1 : 0; |
| 255 |
} |
| 256 |
|
| 257 |
/* write commands to the LED chip though the I2C-bus of the PCAN-PCIeC */ |
| 258 |
static int peak_pciec_write_pca9553(struct peak_pciec_card *card, |
| 259 |
u8 offset, u8 data) |
| 260 |
{ |
| 261 |
u8 buffer[2] = { |
| 262 |
offset, |
| 263 |
data |
| 264 |
}; |
| 265 |
struct i2c_msg msg = { |
| 266 |
.addr = PCA9553_1_SLAVEADDR, |
| 267 |
.len = 2, |
| 268 |
.buf = buffer, |
| 269 |
}; |
| 270 |
int ret; |
| 271 |
|
| 272 |
/* cache led mask */ |
| 273 |
if (offset == 5 && data == card->led_cache) |
| 274 |
return 0; |
| 275 |
|
| 276 |
ret = i2c_transfer(&card->led_chip, &msg, 1); |
| 277 |
if (ret < 0) |
| 278 |
return ret; |
| 279 |
|
| 280 |
if (offset == 5) |
| 281 |
card->led_cache = data; |
| 282 |
|
| 283 |
return 0; |
| 284 |
} |
| 285 |
|
| 286 |
/* delayed work callback used to control the LEDs */ |
| 287 |
static void peak_pciec_led_work(struct work_struct *work) |
| 288 |
{ |
| 289 |
struct peak_pciec_card *card = |
| 290 |
container_of(work, struct peak_pciec_card, led_work.work); |
| 291 |
struct net_device *netdev; |
| 292 |
u8 new_led = card->led_cache; |
| 293 |
int i, up_count = 0; |
| 294 |
|
| 295 |
/* first check what is to do */ |
| 296 |
for (i = 0; i < card->chan_count; i++) { |
| 297 |
/* default is: not configured */ |
| 298 |
new_led &= ~PCA9553_LED_MASK(i); |
| 299 |
new_led |= PCA9553_LED_ON(i); |
| 300 |
|
| 301 |
netdev = card->channel[i].netdev; |
| 302 |
if (!netdev || !(netdev->flags & IFF_UP)) |
| 303 |
continue; |
| 304 |
|
| 305 |
up_count++; |
| 306 |
|
| 307 |
/* no activity (but configured) */ |
| 308 |
new_led &= ~PCA9553_LED_MASK(i); |
| 309 |
new_led |= PCA9553_LED_SLOW(i); |
| 310 |
|
| 311 |
/* if bytes counters changed, set fast blinking led */ |
| 312 |
if (netdev->stats.rx_bytes != card->channel[i].prev_rx_bytes) { |
| 313 |
card->channel[i].prev_rx_bytes = netdev->stats.rx_bytes; |
| 314 |
new_led &= ~PCA9553_LED_MASK(i); |
| 315 |
new_led |= PCA9553_LED_FAST(i); |
| 316 |
} |
| 317 |
if (netdev->stats.tx_bytes != card->channel[i].prev_tx_bytes) { |
| 318 |
card->channel[i].prev_tx_bytes = netdev->stats.tx_bytes; |
| 319 |
new_led &= ~PCA9553_LED_MASK(i); |
| 320 |
new_led |= PCA9553_LED_FAST(i); |
| 321 |
} |
| 322 |
} |
| 323 |
|
| 324 |
/* check if LS0 settings changed, only update i2c if so */ |
| 325 |
peak_pciec_write_pca9553(card, 5, new_led); |
| 326 |
|
| 327 |
/* restart timer (except if no more configured channels) */ |
| 328 |
if (up_count) |
| 329 |
schedule_delayed_work(&card->led_work, HZ); |
| 330 |
} |
| 331 |
|
| 332 |
/* set LEDs blinking state */ |
| 333 |
static void peak_pciec_set_leds(struct peak_pciec_card *card, u8 led_mask, u8 s) |
| 334 |
{ |
| 335 |
u8 new_led = card->led_cache; |
| 336 |
int i; |
| 337 |
|
| 338 |
/* first check what is to do */ |
| 339 |
for (i = 0; i < card->chan_count; i++) |
| 340 |
if (led_mask & PCA9553_LED(i)) { |
| 341 |
new_led &= ~PCA9553_LED_MASK(i); |
| 342 |
new_led |= PCA9553_LED_STATE(s, i); |
| 343 |
} |
| 344 |
|
| 345 |
/* check if LS0 settings changed, only update i2c if so */ |
| 346 |
peak_pciec_write_pca9553(card, 5, new_led); |
| 347 |
} |
| 348 |
|
| 349 |
/* start one second delayed work to control LEDs */ |
| 350 |
static void peak_pciec_start_led_work(struct peak_pciec_card *card) |
| 351 |
{ |
| 352 |
schedule_delayed_work(&card->led_work, HZ); |
| 353 |
} |
| 354 |
|
| 355 |
/* stop LEDs delayed work */ |
| 356 |
static void peak_pciec_stop_led_work(struct peak_pciec_card *card) |
| 357 |
{ |
| 358 |
cancel_delayed_work_sync(&card->led_work); |
| 359 |
} |
| 360 |
|
| 361 |
/* initialize the PCA9553 4-bit I2C-bus LED chip */ |
| 362 |
static int peak_pciec_init_leds(struct peak_pciec_card *card) |
| 363 |
{ |
| 364 |
int err; |
| 365 |
|
| 366 |
/* prescaler for frequency 0: "SLOW" = 1 Hz = "44" */ |
| 367 |
err = peak_pciec_write_pca9553(card, 1, 44 / 1); |
| 368 |
if (err) |
| 369 |
return err; |
| 370 |
|
| 371 |
/* duty cycle 0: 50% */ |
| 372 |
err = peak_pciec_write_pca9553(card, 2, 0x80); |
| 373 |
if (err) |
| 374 |
return err; |
| 375 |
|
| 376 |
/* prescaler for frequency 1: "FAST" = 5 Hz */ |
| 377 |
err = peak_pciec_write_pca9553(card, 3, 44 / 5); |
| 378 |
if (err) |
| 379 |
return err; |
| 380 |
|
| 381 |
/* duty cycle 1: 50% */ |
| 382 |
err = peak_pciec_write_pca9553(card, 4, 0x80); |
| 383 |
if (err) |
| 384 |
return err; |
| 385 |
|
| 386 |
/* switch LEDs to initial state */ |
| 387 |
return peak_pciec_write_pca9553(card, 5, PCA9553_LS0_INIT); |
| 388 |
} |
| 389 |
|
| 390 |
/* restore LEDs state to off peak_pciec_leds_exit */ |
| 391 |
static void peak_pciec_leds_exit(struct peak_pciec_card *card) |
| 392 |
{ |
| 393 |
/* switch LEDs to off */ |
| 394 |
peak_pciec_write_pca9553(card, 5, PCA9553_LED_OFF_ALL); |
| 395 |
} |
| 396 |
|
| 397 |
/* normal write sja1000 register method overloaded to catch when controller |
| 398 |
* is started or stopped, to control leds |
| 399 |
*/ |
| 400 |
static void peak_pciec_write_reg(const struct sja1000_priv *priv, |
| 401 |
int port, u8 val) |
| 402 |
{ |
| 403 |
struct peak_pci_chan *chan = priv->priv; |
| 404 |
struct peak_pciec_card *card = chan->pciec_card; |
| 405 |
int c = (priv->reg_base - card->reg_base) / PEAK_PCI_CHAN_SIZE; |
| 406 |
|
| 407 |
/* sja1000 register changes control the leds state */ |
| 408 |
if (port == SJA1000_MOD) |
| 409 |
switch (val) { |
| 410 |
case MOD_RM: |
| 411 |
/* Reset Mode: set led on */ |
| 412 |
peak_pciec_set_leds(card, PCA9553_LED(c), PCA9553_ON); |
| 413 |
break; |
| 414 |
case 0x00: |
| 415 |
/* Normal Mode: led slow blinking and start led timer */ |
| 416 |
peak_pciec_set_leds(card, PCA9553_LED(c), PCA9553_SLOW); |
| 417 |
peak_pciec_start_led_work(card); |
| 418 |
break; |
| 419 |
default: |
| 420 |
break; |
| 421 |
} |
| 422 |
|
| 423 |
/* call base function */ |
| 424 |
peak_pci_write_reg(priv, port, val); |
| 425 |
} |
| 426 |
|
| 427 |
static const struct i2c_algo_bit_data peak_pciec_i2c_bit_ops = { |
| 428 |
.setsda = pita_setsda, |
| 429 |
.setscl = pita_setscl, |
| 430 |
.getsda = pita_getsda, |
| 431 |
.getscl = pita_getscl, |
| 432 |
.udelay = 10, |
| 433 |
.timeout = HZ, |
| 434 |
}; |
| 435 |
|
| 436 |
static int peak_pciec_probe(struct pci_dev *pdev, struct net_device *dev) |
| 437 |
{ |
| 438 |
struct sja1000_priv *priv = netdev_priv(dev); |
| 439 |
struct peak_pci_chan *chan = priv->priv; |
| 440 |
struct peak_pciec_card *card; |
| 441 |
int err; |
| 442 |
|
| 443 |
/* copy i2c object address from 1st channel */ |
| 444 |
if (chan->prev_dev) { |
| 445 |
struct sja1000_priv *prev_priv = netdev_priv(chan->prev_dev); |
| 446 |
struct peak_pci_chan *prev_chan = prev_priv->priv; |
| 447 |
|
| 448 |
card = prev_chan->pciec_card; |
| 449 |
if (!card) |
| 450 |
return -ENODEV; |
| 451 |
|
| 452 |
/* channel is the first one: do the init part */ |
| 453 |
} else { |
| 454 |
/* create the bit banging I2C adapter structure */ |
| 455 |
card = kzalloc_obj(*card); |
| 456 |
if (!card) |
| 457 |
return -ENOMEM; |
| 458 |
|
| 459 |
card->cfg_base = chan->cfg_base; |
| 460 |
card->reg_base = priv->reg_base; |
| 461 |
|
| 462 |
card->led_chip.owner = THIS_MODULE; |
| 463 |
card->led_chip.dev.parent = &pdev->dev; |
| 464 |
card->led_chip.algo_data = &card->i2c_bit; |
| 465 |
strscpy(card->led_chip.name, "peak_i2c", |
| 466 |
sizeof(card->led_chip.name)); |
| 467 |
|
| 468 |
card->i2c_bit = peak_pciec_i2c_bit_ops; |
| 469 |
card->i2c_bit.udelay = 10; |
| 470 |
card->i2c_bit.timeout = HZ; |
| 471 |
card->i2c_bit.data = card; |
| 472 |
|
| 473 |
peak_pciec_init_pita_gpio(card); |
| 474 |
|
| 475 |
err = i2c_bit_add_bus(&card->led_chip); |
| 476 |
if (err) { |
| 477 |
dev_err(&pdev->dev, "i2c init failed\n"); |
| 478 |
goto pciec_init_err_1; |
| 479 |
} |
| 480 |
|
| 481 |
err = peak_pciec_init_leds(card); |
| 482 |
if (err) { |
| 483 |
dev_err(&pdev->dev, "leds hardware init failed\n"); |
| 484 |
goto pciec_init_err_2; |
| 485 |
} |
| 486 |
|
| 487 |
INIT_DELAYED_WORK(&card->led_work, peak_pciec_led_work); |
| 488 |
/* PCAN-ExpressCard needs its own callback for leds */ |
| 489 |
priv->write_reg = peak_pciec_write_reg; |
| 490 |
} |
| 491 |
|
| 492 |
chan->pciec_card = card; |
| 493 |
card->channel[card->chan_count++].netdev = dev; |
| 494 |
|
| 495 |
return 0; |
| 496 |
|
| 497 |
pciec_init_err_2: |
| 498 |
i2c_del_adapter(&card->led_chip); |
| 499 |
|
| 500 |
pciec_init_err_1: |
| 501 |
peak_pciec_init_pita_gpio(card); |
| 502 |
kfree(card); |
| 503 |
|
| 504 |
return err; |
| 505 |
} |
| 506 |
|
| 507 |
static void peak_pciec_remove(struct peak_pciec_card *card) |
| 508 |
{ |
| 509 |
peak_pciec_stop_led_work(card); |
| 510 |
peak_pciec_leds_exit(card); |
| 511 |
i2c_del_adapter(&card->led_chip); |
| 512 |
peak_pciec_init_pita_gpio(card); |
| 513 |
kfree(card); |
| 514 |
} |
| 515 |
|
| 516 |
#else /* CONFIG_CAN_PEAK_PCIEC */ |
| 517 |
|
| 518 |
/* Placebo functions when PCAN-ExpressCard support is not selected */ |
| 519 |
static inline int peak_pciec_probe(struct pci_dev *pdev, struct net_device *dev) |
| 520 |
{ |
| 521 |
return -ENODEV; |
| 522 |
} |
| 523 |
|
| 524 |
static inline void peak_pciec_remove(struct peak_pciec_card *card) |
| 525 |
{ |
| 526 |
} |
| 527 |
#endif /* CONFIG_CAN_PEAK_PCIEC */ |
| 528 |
|
| 529 |
static u8 peak_pci_read_reg(const struct sja1000_priv *priv, int port) |
| 530 |
{ |
| 531 |
return readb(priv->reg_base + (port << 2)); |
| 532 |
} |
| 533 |
|
| 534 |
static void peak_pci_write_reg(const struct sja1000_priv *priv, |
| 535 |
int port, u8 val) |
| 536 |
{ |
| 537 |
writeb(val, priv->reg_base + (port << 2)); |
| 538 |
} |
| 539 |
|
| 540 |
static void peak_pci_post_irq(const struct sja1000_priv *priv) |
| 541 |
{ |
| 542 |
struct peak_pci_chan *chan = priv->priv; |
| 543 |
u16 icr; |
| 544 |
|
| 545 |
/* Select and clear in PITA stored interrupt */ |
| 546 |
icr = readw(chan->cfg_base + PITA_ICR); |
| 547 |
if (icr & chan->icr_mask) |
| 548 |
writew(chan->icr_mask, chan->cfg_base + PITA_ICR); |
| 549 |
} |
| 550 |
|
| 551 |
static int peak_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) |
| 552 |
{ |
| 553 |
struct sja1000_priv *priv; |
| 554 |
struct peak_pci_chan *chan; |
| 555 |
struct net_device *dev, *prev_dev; |
| 556 |
void __iomem *cfg_base, *reg_base; |
| 557 |
u16 sub_sys_id, icr; |
| 558 |
int i, err, channels; |
| 559 |
char fw_str[14] = ""; |
| 560 |
|
| 561 |
err = pci_enable_device(pdev); |
| 562 |
if (err) |
| 563 |
return err; |
| 564 |
|
| 565 |
err = pci_request_regions(pdev, DRV_NAME); |
| 566 |
if (err) |
| 567 |
goto failure_disable_pci; |
| 568 |
|
| 569 |
err = pci_read_config_word(pdev, 0x2e, &sub_sys_id); |
| 570 |
if (err) |
| 571 |
goto failure_release_regions; |
| 572 |
|
| 573 |
dev_dbg(&pdev->dev, "probing device %04x:%04x:%04x\n", |
| 574 |
pdev->vendor, pdev->device, sub_sys_id); |
| 575 |
|
| 576 |
err = pci_write_config_word(pdev, 0x44, 0); |
| 577 |
if (err) |
| 578 |
goto failure_release_regions; |
| 579 |
|
| 580 |
if (sub_sys_id >= 12) |
| 581 |
channels = 4; |
| 582 |
else if (sub_sys_id >= 10) |
| 583 |
channels = 3; |
| 584 |
else if (sub_sys_id >= 4) |
| 585 |
channels = 2; |
| 586 |
else |
| 587 |
channels = 1; |
| 588 |
|
| 589 |
cfg_base = pci_iomap(pdev, 0, PEAK_PCI_CFG_SIZE); |
| 590 |
if (!cfg_base) { |
| 591 |
dev_err(&pdev->dev, "failed to map PCI resource #0\n"); |
| 592 |
err = -ENOMEM; |
| 593 |
goto failure_release_regions; |
| 594 |
} |
| 595 |
|
| 596 |
reg_base = pci_iomap(pdev, 1, PEAK_PCI_CHAN_SIZE * channels); |
| 597 |
if (!reg_base) { |
| 598 |
dev_err(&pdev->dev, "failed to map PCI resource #1\n"); |
| 599 |
err = -ENOMEM; |
| 600 |
goto failure_unmap_cfg_base; |
| 601 |
} |
| 602 |
|
| 603 |
/* Set GPIO control register */ |
| 604 |
writew(0x0005, cfg_base + PITA_GPIOICR + 2); |
| 605 |
/* Enable all channels of this card */ |
| 606 |
writeb(0x00, cfg_base + PITA_GPIOICR); |
| 607 |
/* Toggle reset */ |
| 608 |
writeb(0x05, cfg_base + PITA_MISC + 3); |
| 609 |
usleep_range(5000, 6000); |
| 610 |
/* Leave parport mux mode */ |
| 611 |
writeb(0x04, cfg_base + PITA_MISC + 3); |
| 612 |
|
| 613 |
/* FPGA equipped card if not 0 */ |
| 614 |
if (readl(cfg_base + PEAK_VER_REG1)) { |
| 615 |
/* FPGA card: display version of the running firmware */ |
| 616 |
u32 fw_ver = readl(cfg_base + PEAK_VER_REG2); |
| 617 |
|
| 618 |
snprintf(fw_str, sizeof(fw_str), " FW v%u.%u.%u", |
| 619 |
(fw_ver >> 12) & 0xf, |
| 620 |
(fw_ver >> 8) & 0xf, |
| 621 |
(fw_ver >> 4) & 0xf); |
| 622 |
} |
| 623 |
|
| 624 |
/* Display commercial name (and, eventually, FW version) of the card */ |
| 625 |
dev_info(&pdev->dev, "%ux CAN %s%s\n", |
| 626 |
channels, (const char *)ent->driver_data, fw_str); |
| 627 |
|
| 628 |
icr = readw(cfg_base + PITA_ICR + 2); |
| 629 |
|
| 630 |
for (i = 0; i < channels; i++) { |
| 631 |
dev = alloc_sja1000dev(sizeof(struct peak_pci_chan)); |
| 632 |
if (!dev) { |
| 633 |
err = -ENOMEM; |
| 634 |
goto failure_remove_channels; |
| 635 |
} |
| 636 |
|
| 637 |
priv = netdev_priv(dev); |
| 638 |
chan = priv->priv; |
| 639 |
|
| 640 |
chan->cfg_base = cfg_base; |
| 641 |
priv->reg_base = reg_base + i * PEAK_PCI_CHAN_SIZE; |
| 642 |
|
| 643 |
priv->read_reg = peak_pci_read_reg; |
| 644 |
priv->write_reg = peak_pci_write_reg; |
| 645 |
priv->post_irq = peak_pci_post_irq; |
| 646 |
|
| 647 |
priv->can.clock.freq = PEAK_PCI_CAN_CLOCK; |
| 648 |
priv->ocr = PEAK_PCI_OCR; |
| 649 |
priv->cdr = PEAK_PCI_CDR; |
| 650 |
/* Neither a slave nor a single device distributes the clock */ |
| 651 |
if (channels == 1 || i > 0) |
| 652 |
priv->cdr |= CDR_CLK_OFF; |
| 653 |
|
| 654 |
/* Setup interrupt handling */ |
| 655 |
priv->irq_flags = IRQF_SHARED; |
| 656 |
dev->irq = pdev->irq; |
| 657 |
|
| 658 |
chan->icr_mask = peak_pci_icr_masks[i]; |
| 659 |
icr |= chan->icr_mask; |
| 660 |
|
| 661 |
SET_NETDEV_DEV(dev, &pdev->dev); |
| 662 |
dev->dev_id = i; |
| 663 |
|
| 664 |
/* Create chain of SJA1000 devices */ |
| 665 |
chan->prev_dev = pci_get_drvdata(pdev); |
| 666 |
pci_set_drvdata(pdev, dev); |
| 667 |
|
| 668 |
/* PCAN-ExpressCard needs some additional i2c init. |
| 669 |
* This must be done *before* register_sja1000dev() but |
| 670 |
* *after* devices linkage |
| 671 |
*/ |
| 672 |
if (pdev->device == PEAK_PCIEC_DEVICE_ID || |
| 673 |
pdev->device == PEAK_PCIEC34_DEVICE_ID) { |
| 674 |
err = peak_pciec_probe(pdev, dev); |
| 675 |
if (err) { |
| 676 |
dev_err(&pdev->dev, |
| 677 |
"failed to probe device (err %d)\n", |
| 678 |
err); |
| 679 |
goto failure_free_dev; |
| 680 |
} |
| 681 |
} |
| 682 |
|
| 683 |
err = register_sja1000dev(dev); |
| 684 |
if (err) { |
| 685 |
dev_err(&pdev->dev, "failed to register device\n"); |
| 686 |
goto failure_free_dev; |
| 687 |
} |
| 688 |
|
| 689 |
dev_info(&pdev->dev, |
| 690 |
"%s at reg_base=0x%p cfg_base=0x%p irq=%d\n", |
| 691 |
dev->name, priv->reg_base, chan->cfg_base, dev->irq); |
| 692 |
} |
| 693 |
|
| 694 |
/* Enable interrupts */ |
| 695 |
writew(icr, cfg_base + PITA_ICR + 2); |
| 696 |
|
| 697 |
return 0; |
| 698 |
|
| 699 |
failure_free_dev: |
| 700 |
pci_set_drvdata(pdev, chan->prev_dev); |
| 701 |
free_sja1000dev(dev); |
| 702 |
|
| 703 |
failure_remove_channels: |
| 704 |
/* Disable interrupts */ |
| 705 |
writew(0x0, cfg_base + PITA_ICR + 2); |
| 706 |
|
| 707 |
chan = NULL; |
| 708 |
for (dev = pci_get_drvdata(pdev); dev; dev = prev_dev) { |
| 709 |
priv = netdev_priv(dev); |
| 710 |
chan = priv->priv; |
| 711 |
prev_dev = chan->prev_dev; |
| 712 |
|
| 713 |
unregister_sja1000dev(dev); |
| 714 |
free_sja1000dev(dev); |
| 715 |
} |
| 716 |
|
| 717 |
/* free any PCIeC resources too */ |
| 718 |
if (chan && chan->pciec_card) |
| 719 |
peak_pciec_remove(chan->pciec_card); |
| 720 |
|
| 721 |
pci_iounmap(pdev, reg_base); |
| 722 |
|
| 723 |
failure_unmap_cfg_base: |
| 724 |
pci_iounmap(pdev, cfg_base); |
| 725 |
|
| 726 |
failure_release_regions: |
| 727 |
pci_release_regions(pdev); |
| 728 |
|
| 729 |
failure_disable_pci: |
| 730 |
pci_disable_device(pdev); |
| 731 |
|
| 732 |
/* pci_xxx_config_word() return positive PCIBIOS_xxx error codes while |
| 733 |
* the probe() function must return a negative errno in case of failure |
| 734 |
* (err is unchanged if negative) |
| 735 |
*/ |
| 736 |
return pcibios_err_to_errno(err); |
| 737 |
} |
| 738 |
|
| 739 |
static void peak_pci_remove(struct pci_dev *pdev) |
| 740 |
{ |
| 741 |
struct net_device *dev = pci_get_drvdata(pdev); /* Last device */ |
| 742 |
struct sja1000_priv *priv = netdev_priv(dev); |
| 743 |
struct peak_pci_chan *chan = priv->priv; |
| 744 |
void __iomem *cfg_base = chan->cfg_base; |
| 745 |
void __iomem *reg_base = priv->reg_base; |
| 746 |
|
| 747 |
/* Disable interrupts */ |
| 748 |
writew(0x0, cfg_base + PITA_ICR + 2); |
| 749 |
|
| 750 |
/* Loop over all registered devices */ |
| 751 |
while (1) { |
| 752 |
struct net_device *prev_dev = chan->prev_dev; |
| 753 |
|
| 754 |
dev_info(&pdev->dev, "removing device %s\n", dev->name); |
| 755 |
/* do that only for first channel */ |
| 756 |
if (!prev_dev && chan->pciec_card) |
| 757 |
peak_pciec_remove(chan->pciec_card); |
| 758 |
unregister_sja1000dev(dev); |
| 759 |
free_sja1000dev(dev); |
| 760 |
dev = prev_dev; |
| 761 |
|
| 762 |
if (!dev) |
| 763 |
break; |
| 764 |
priv = netdev_priv(dev); |
| 765 |
chan = priv->priv; |
| 766 |
} |
| 767 |
|
| 768 |
pci_iounmap(pdev, reg_base); |
| 769 |
pci_iounmap(pdev, cfg_base); |
| 770 |
pci_release_regions(pdev); |
| 771 |
pci_disable_device(pdev); |
| 772 |
} |
| 773 |
|
| 774 |
static struct pci_driver peak_pci_driver = { |
| 775 |
.name = DRV_NAME, |
| 776 |
.id_table = peak_pci_tbl, |
| 777 |
.probe = peak_pci_probe, |
| 778 |
.remove = peak_pci_remove, |
| 779 |
}; |
| 780 |
|
| 781 |
module_pci_driver(peak_pci_driver); |