| 1 |
/* |
| 2 |
* sun4i_can.c - CAN bus controller driver for Allwinner SUN4I&SUN7I based SoCs |
| 3 |
* |
| 4 |
* Copyright (C) 2013 Peter Chen |
| 5 |
* Copyright (C) 2015 Gerhard Bertelsmann |
| 6 |
* All rights reserved. |
| 7 |
* |
| 8 |
* Parts of this software are based on (derived from) the SJA1000 code by: |
| 9 |
* Copyright (C) 2014 Oliver Hartkopp <[email protected]> |
| 10 |
* Copyright (C) 2007 Wolfgang Grandegger <[email protected]> |
| 11 |
* Copyright (C) 2002-2007 Volkswagen Group Electronic Research |
| 12 |
* Copyright (C) 2003 Matthias Brukner, Trajet Gmbh, Rebenring 33, |
| 13 |
* 38106 Braunschweig, GERMANY |
| 14 |
* |
| 15 |
* Redistribution and use in source and binary forms, with or without |
| 16 |
* modification, are permitted provided that the following conditions |
| 17 |
* are met: |
| 18 |
* 1. Redistributions of source code must retain the above copyright |
| 19 |
* notice, this list of conditions and the following disclaimer. |
| 20 |
* 2. Redistributions in binary form must reproduce the above copyright |
| 21 |
* notice, this list of conditions and the following disclaimer in the |
| 22 |
* documentation and/or other materials provided with the distribution. |
| 23 |
* 3. Neither the name of Volkswagen nor the names of its contributors |
| 24 |
* may be used to endorse or promote products derived from this software |
| 25 |
* without specific prior written permission. |
| 26 |
* |
| 27 |
* Alternatively, provided that this notice is retained in full, this |
| 28 |
* software may be distributed under the terms of the GNU General |
| 29 |
* Public License ("GPL") version 2, in which case the provisions of the |
| 30 |
* GPL apply INSTEAD OF those given above. |
| 31 |
* |
| 32 |
* The provided data structures and external interfaces from this code |
| 33 |
* are not restricted to be used by modules with a GPL compatible license. |
| 34 |
* |
| 35 |
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| 36 |
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| 37 |
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| 38 |
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| 39 |
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| 40 |
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| 41 |
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| 42 |
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| 43 |
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| 44 |
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| 45 |
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH |
| 46 |
* DAMAGE. |
| 47 |
* |
| 48 |
*/ |
| 49 |
|
| 50 |
#include <linux/netdevice.h> |
| 51 |
#include <linux/can.h> |
| 52 |
#include <linux/can/dev.h> |
| 53 |
#include <linux/can/error.h> |
| 54 |
#include <linux/clk.h> |
| 55 |
#include <linux/delay.h> |
| 56 |
#include <linux/ethtool.h> |
| 57 |
#include <linux/interrupt.h> |
| 58 |
#include <linux/init.h> |
| 59 |
#include <linux/io.h> |
| 60 |
#include <linux/module.h> |
| 61 |
#include <linux/of.h> |
| 62 |
#include <linux/platform_device.h> |
| 63 |
#include <linux/reset.h> |
| 64 |
|
| 65 |
#define DRV_NAME "sun4i_can" |
| 66 |
|
| 67 |
/* Registers address (physical base address 0x01C2BC00) */ |
| 68 |
#define SUN4I_REG_MSEL_ADDR 0x0000 /* CAN Mode Select */ |
| 69 |
#define SUN4I_REG_CMD_ADDR 0x0004 /* CAN Command */ |
| 70 |
#define SUN4I_REG_STA_ADDR 0x0008 /* CAN Status */ |
| 71 |
#define SUN4I_REG_INT_ADDR 0x000c /* CAN Interrupt Flag */ |
| 72 |
#define SUN4I_REG_INTEN_ADDR 0x0010 /* CAN Interrupt Enable */ |
| 73 |
#define SUN4I_REG_BTIME_ADDR 0x0014 /* CAN Bus Timing 0 */ |
| 74 |
#define SUN4I_REG_TEWL_ADDR 0x0018 /* CAN Tx Error Warning Limit */ |
| 75 |
#define SUN4I_REG_ERRC_ADDR 0x001c /* CAN Error Counter */ |
| 76 |
#define SUN4I_REG_RMCNT_ADDR 0x0020 /* CAN Receive Message Counter */ |
| 77 |
#define SUN4I_REG_RBUFSA_ADDR 0x0024 /* CAN Receive Buffer Start Address */ |
| 78 |
#define SUN4I_REG_BUF0_ADDR 0x0040 /* CAN Tx/Rx Buffer 0 */ |
| 79 |
#define SUN4I_REG_BUF1_ADDR 0x0044 /* CAN Tx/Rx Buffer 1 */ |
| 80 |
#define SUN4I_REG_BUF2_ADDR 0x0048 /* CAN Tx/Rx Buffer 2 */ |
| 81 |
#define SUN4I_REG_BUF3_ADDR 0x004c /* CAN Tx/Rx Buffer 3 */ |
| 82 |
#define SUN4I_REG_BUF4_ADDR 0x0050 /* CAN Tx/Rx Buffer 4 */ |
| 83 |
#define SUN4I_REG_BUF5_ADDR 0x0054 /* CAN Tx/Rx Buffer 5 */ |
| 84 |
#define SUN4I_REG_BUF6_ADDR 0x0058 /* CAN Tx/Rx Buffer 6 */ |
| 85 |
#define SUN4I_REG_BUF7_ADDR 0x005c /* CAN Tx/Rx Buffer 7 */ |
| 86 |
#define SUN4I_REG_BUF8_ADDR 0x0060 /* CAN Tx/Rx Buffer 8 */ |
| 87 |
#define SUN4I_REG_BUF9_ADDR 0x0064 /* CAN Tx/Rx Buffer 9 */ |
| 88 |
#define SUN4I_REG_BUF10_ADDR 0x0068 /* CAN Tx/Rx Buffer 10 */ |
| 89 |
#define SUN4I_REG_BUF11_ADDR 0x006c /* CAN Tx/Rx Buffer 11 */ |
| 90 |
#define SUN4I_REG_BUF12_ADDR 0x0070 /* CAN Tx/Rx Buffer 12 */ |
| 91 |
#define SUN4I_REG_ACPC_ADDR 0x0040 /* CAN Acceptance Code 0 */ |
| 92 |
#define SUN4I_REG_ACPM_ADDR 0x0044 /* CAN Acceptance Mask 0 */ |
| 93 |
#define SUN4I_REG_ACPC_ADDR_D1 0x0028 /* CAN Acceptance Code 0 on the D1 */ |
| 94 |
#define SUN4I_REG_ACPM_ADDR_D1 0x002C /* CAN Acceptance Mask 0 on the D1 */ |
| 95 |
#define SUN4I_REG_RBUF_RBACK_START_ADDR 0x0180 /* CAN transmit buffer start */ |
| 96 |
#define SUN4I_REG_RBUF_RBACK_END_ADDR 0x01b0 /* CAN transmit buffer end */ |
| 97 |
|
| 98 |
/* Controller Register Description */ |
| 99 |
|
| 100 |
/* mode select register (r/w) |
| 101 |
* offset:0x0000 default:0x0000_0001 |
| 102 |
*/ |
| 103 |
#define SUN4I_MSEL_SLEEP_MODE (0x01 << 4) /* write in reset mode */ |
| 104 |
#define SUN4I_MSEL_WAKE_UP (0x00 << 4) |
| 105 |
#define SUN4I_MSEL_SINGLE_FILTER (0x01 << 3) /* write in reset mode */ |
| 106 |
#define SUN4I_MSEL_DUAL_FILTERS (0x00 << 3) |
| 107 |
#define SUN4I_MSEL_LOOPBACK_MODE BIT(2) |
| 108 |
#define SUN4I_MSEL_LISTEN_ONLY_MODE BIT(1) |
| 109 |
#define SUN4I_MSEL_RESET_MODE BIT(0) |
| 110 |
|
| 111 |
/* command register (w) |
| 112 |
* offset:0x0004 default:0x0000_0000 |
| 113 |
*/ |
| 114 |
#define SUN4I_CMD_BUS_OFF_REQ BIT(5) |
| 115 |
#define SUN4I_CMD_SELF_RCV_REQ BIT(4) |
| 116 |
#define SUN4I_CMD_CLEAR_OR_FLAG BIT(3) |
| 117 |
#define SUN4I_CMD_RELEASE_RBUF BIT(2) |
| 118 |
#define SUN4I_CMD_ABORT_REQ BIT(1) |
| 119 |
#define SUN4I_CMD_TRANS_REQ BIT(0) |
| 120 |
|
| 121 |
/* status register (r) |
| 122 |
* offset:0x0008 default:0x0000_003c |
| 123 |
*/ |
| 124 |
#define SUN4I_STA_BIT_ERR (0x00 << 22) |
| 125 |
#define SUN4I_STA_FORM_ERR (0x01 << 22) |
| 126 |
#define SUN4I_STA_STUFF_ERR (0x02 << 22) |
| 127 |
#define SUN4I_STA_OTHER_ERR (0x03 << 22) |
| 128 |
#define SUN4I_STA_MASK_ERR (0x03 << 22) |
| 129 |
#define SUN4I_STA_ERR_DIR BIT(21) |
| 130 |
#define SUN4I_STA_ERR_SEG_CODE (0x1f << 16) |
| 131 |
#define SUN4I_STA_START (0x03 << 16) |
| 132 |
#define SUN4I_STA_ID28_21 (0x02 << 16) |
| 133 |
#define SUN4I_STA_ID20_18 (0x06 << 16) |
| 134 |
#define SUN4I_STA_SRTR (0x04 << 16) |
| 135 |
#define SUN4I_STA_IDE (0x05 << 16) |
| 136 |
#define SUN4I_STA_ID17_13 (0x07 << 16) |
| 137 |
#define SUN4I_STA_ID12_5 (0x0f << 16) |
| 138 |
#define SUN4I_STA_ID4_0 (0x0e << 16) |
| 139 |
#define SUN4I_STA_RTR (0x0c << 16) |
| 140 |
#define SUN4I_STA_RB1 (0x0d << 16) |
| 141 |
#define SUN4I_STA_RB0 (0x09 << 16) |
| 142 |
#define SUN4I_STA_DLEN (0x0b << 16) |
| 143 |
#define SUN4I_STA_DATA_FIELD (0x0a << 16) |
| 144 |
#define SUN4I_STA_CRC_SEQUENCE (0x08 << 16) |
| 145 |
#define SUN4I_STA_CRC_DELIMITER (0x18 << 16) |
| 146 |
#define SUN4I_STA_ACK (0x19 << 16) |
| 147 |
#define SUN4I_STA_ACK_DELIMITER (0x1b << 16) |
| 148 |
#define SUN4I_STA_END (0x1a << 16) |
| 149 |
#define SUN4I_STA_INTERMISSION (0x12 << 16) |
| 150 |
#define SUN4I_STA_ACTIVE_ERROR (0x11 << 16) |
| 151 |
#define SUN4I_STA_PASSIVE_ERROR (0x16 << 16) |
| 152 |
#define SUN4I_STA_TOLERATE_DOMINANT_BITS (0x13 << 16) |
| 153 |
#define SUN4I_STA_ERROR_DELIMITER (0x17 << 16) |
| 154 |
#define SUN4I_STA_OVERLOAD (0x1c << 16) |
| 155 |
#define SUN4I_STA_BUS_OFF BIT(7) |
| 156 |
#define SUN4I_STA_ERR_STA BIT(6) |
| 157 |
#define SUN4I_STA_TRANS_BUSY BIT(5) |
| 158 |
#define SUN4I_STA_RCV_BUSY BIT(4) |
| 159 |
#define SUN4I_STA_TRANS_OVER BIT(3) |
| 160 |
#define SUN4I_STA_TBUF_RDY BIT(2) |
| 161 |
#define SUN4I_STA_DATA_ORUN BIT(1) |
| 162 |
#define SUN4I_STA_RBUF_RDY BIT(0) |
| 163 |
|
| 164 |
/* interrupt register (r) |
| 165 |
* offset:0x000c default:0x0000_0000 |
| 166 |
*/ |
| 167 |
#define SUN4I_INT_BUS_ERR BIT(7) |
| 168 |
#define SUN4I_INT_ARB_LOST BIT(6) |
| 169 |
#define SUN4I_INT_ERR_PASSIVE BIT(5) |
| 170 |
#define SUN4I_INT_WAKEUP BIT(4) |
| 171 |
#define SUN4I_INT_DATA_OR BIT(3) |
| 172 |
#define SUN4I_INT_ERR_WRN BIT(2) |
| 173 |
#define SUN4I_INT_TBUF_VLD BIT(1) |
| 174 |
#define SUN4I_INT_RBUF_VLD BIT(0) |
| 175 |
|
| 176 |
/* interrupt enable register (r/w) |
| 177 |
* offset:0x0010 default:0x0000_0000 |
| 178 |
*/ |
| 179 |
#define SUN4I_INTEN_BERR BIT(7) |
| 180 |
#define SUN4I_INTEN_ARB_LOST BIT(6) |
| 181 |
#define SUN4I_INTEN_ERR_PASSIVE BIT(5) |
| 182 |
#define SUN4I_INTEN_WAKEUP BIT(4) |
| 183 |
#define SUN4I_INTEN_OR BIT(3) |
| 184 |
#define SUN4I_INTEN_ERR_WRN BIT(2) |
| 185 |
#define SUN4I_INTEN_TX BIT(1) |
| 186 |
#define SUN4I_INTEN_RX BIT(0) |
| 187 |
|
| 188 |
/* error code */ |
| 189 |
#define SUN4I_ERR_INRCV (0x1 << 5) |
| 190 |
#define SUN4I_ERR_INTRANS (0x0 << 5) |
| 191 |
|
| 192 |
/* filter mode */ |
| 193 |
#define SUN4I_FILTER_CLOSE 0 |
| 194 |
#define SUN4I_SINGLE_FLTER_MODE 1 |
| 195 |
#define SUN4I_DUAL_FILTER_MODE 2 |
| 196 |
|
| 197 |
/* message buffer flags */ |
| 198 |
#define SUN4I_MSG_EFF_FLAG BIT(7) |
| 199 |
#define SUN4I_MSG_RTR_FLAG BIT(6) |
| 200 |
|
| 201 |
/* max. number of interrupts handled in ISR */ |
| 202 |
#define SUN4I_CAN_MAX_IRQ 20 |
| 203 |
#define SUN4I_MODE_MAX_RETRIES 100 |
| 204 |
|
| 205 |
/** |
| 206 |
* struct sun4ican_quirks - Differences between SoC variants. |
| 207 |
* |
| 208 |
* @has_reset: SoC needs reset deasserted. |
| 209 |
* @acp_offset: Offset of ACPC and ACPM registers |
| 210 |
*/ |
| 211 |
struct sun4ican_quirks { |
| 212 |
bool has_reset; |
| 213 |
int acp_offset; |
| 214 |
}; |
| 215 |
|
| 216 |
struct sun4ican_priv { |
| 217 |
struct can_priv can; |
| 218 |
void __iomem *base; |
| 219 |
struct clk *clk; |
| 220 |
struct reset_control *reset; |
| 221 |
spinlock_t cmdreg_lock; /* lock for concurrent cmd register writes */ |
| 222 |
int acp_offset; |
| 223 |
}; |
| 224 |
|
| 225 |
static const struct can_bittiming_const sun4ican_bittiming_const = { |
| 226 |
.name = DRV_NAME, |
| 227 |
.tseg1_min = 1, |
| 228 |
.tseg1_max = 16, |
| 229 |
.tseg2_min = 1, |
| 230 |
.tseg2_max = 8, |
| 231 |
.sjw_max = 4, |
| 232 |
.brp_min = 1, |
| 233 |
.brp_max = 64, |
| 234 |
.brp_inc = 1, |
| 235 |
}; |
| 236 |
|
| 237 |
static void sun4i_can_write_cmdreg(struct sun4ican_priv *priv, u8 val) |
| 238 |
{ |
| 239 |
unsigned long flags; |
| 240 |
|
| 241 |
spin_lock_irqsave(&priv->cmdreg_lock, flags); |
| 242 |
writel(val, priv->base + SUN4I_REG_CMD_ADDR); |
| 243 |
spin_unlock_irqrestore(&priv->cmdreg_lock, flags); |
| 244 |
} |
| 245 |
|
| 246 |
static int set_normal_mode(struct net_device *dev) |
| 247 |
{ |
| 248 |
struct sun4ican_priv *priv = netdev_priv(dev); |
| 249 |
int retry = SUN4I_MODE_MAX_RETRIES; |
| 250 |
u32 mod_reg_val = 0; |
| 251 |
|
| 252 |
do { |
| 253 |
mod_reg_val = readl(priv->base + SUN4I_REG_MSEL_ADDR); |
| 254 |
mod_reg_val &= ~SUN4I_MSEL_RESET_MODE; |
| 255 |
writel(mod_reg_val, priv->base + SUN4I_REG_MSEL_ADDR); |
| 256 |
} while (retry-- && (mod_reg_val & SUN4I_MSEL_RESET_MODE)); |
| 257 |
|
| 258 |
if (readl(priv->base + SUN4I_REG_MSEL_ADDR) & SUN4I_MSEL_RESET_MODE) { |
| 259 |
netdev_err(dev, |
| 260 |
"setting controller into normal mode failed!\n"); |
| 261 |
return -ETIMEDOUT; |
| 262 |
} |
| 263 |
|
| 264 |
return 0; |
| 265 |
} |
| 266 |
|
| 267 |
static int set_reset_mode(struct net_device *dev) |
| 268 |
{ |
| 269 |
struct sun4ican_priv *priv = netdev_priv(dev); |
| 270 |
int retry = SUN4I_MODE_MAX_RETRIES; |
| 271 |
u32 mod_reg_val = 0; |
| 272 |
|
| 273 |
do { |
| 274 |
mod_reg_val = readl(priv->base + SUN4I_REG_MSEL_ADDR); |
| 275 |
mod_reg_val |= SUN4I_MSEL_RESET_MODE; |
| 276 |
writel(mod_reg_val, priv->base + SUN4I_REG_MSEL_ADDR); |
| 277 |
} while (retry-- && !(mod_reg_val & SUN4I_MSEL_RESET_MODE)); |
| 278 |
|
| 279 |
if (!(readl(priv->base + SUN4I_REG_MSEL_ADDR) & |
| 280 |
SUN4I_MSEL_RESET_MODE)) { |
| 281 |
netdev_err(dev, "setting controller into reset mode failed!\n"); |
| 282 |
return -ETIMEDOUT; |
| 283 |
} |
| 284 |
|
| 285 |
return 0; |
| 286 |
} |
| 287 |
|
| 288 |
/* bittiming is called in reset_mode only */ |
| 289 |
static int sun4ican_set_bittiming(struct net_device *dev) |
| 290 |
{ |
| 291 |
struct sun4ican_priv *priv = netdev_priv(dev); |
| 292 |
struct can_bittiming *bt = &priv->can.bittiming; |
| 293 |
u32 cfg; |
| 294 |
|
| 295 |
cfg = ((bt->brp - 1) & 0x3FF) | |
| 296 |
(((bt->sjw - 1) & 0x3) << 14) | |
| 297 |
(((bt->prop_seg + bt->phase_seg1 - 1) & 0xf) << 16) | |
| 298 |
(((bt->phase_seg2 - 1) & 0x7) << 20); |
| 299 |
if (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES) |
| 300 |
cfg |= 0x800000; |
| 301 |
|
| 302 |
netdev_dbg(dev, "setting BITTIMING=0x%08x\n", cfg); |
| 303 |
writel(cfg, priv->base + SUN4I_REG_BTIME_ADDR); |
| 304 |
|
| 305 |
return 0; |
| 306 |
} |
| 307 |
|
| 308 |
static int sun4ican_get_berr_counter(const struct net_device *dev, |
| 309 |
struct can_berr_counter *bec) |
| 310 |
{ |
| 311 |
struct sun4ican_priv *priv = netdev_priv(dev); |
| 312 |
u32 errors; |
| 313 |
int err; |
| 314 |
|
| 315 |
err = clk_prepare_enable(priv->clk); |
| 316 |
if (err) { |
| 317 |
netdev_err(dev, "could not enable clock\n"); |
| 318 |
return err; |
| 319 |
} |
| 320 |
|
| 321 |
errors = readl(priv->base + SUN4I_REG_ERRC_ADDR); |
| 322 |
|
| 323 |
bec->txerr = errors & 0xFF; |
| 324 |
bec->rxerr = (errors >> 16) & 0xFF; |
| 325 |
|
| 326 |
clk_disable_unprepare(priv->clk); |
| 327 |
|
| 328 |
return 0; |
| 329 |
} |
| 330 |
|
| 331 |
static int sun4i_can_start(struct net_device *dev) |
| 332 |
{ |
| 333 |
struct sun4ican_priv *priv = netdev_priv(dev); |
| 334 |
int err; |
| 335 |
u32 mod_reg_val; |
| 336 |
|
| 337 |
/* we need to enter the reset mode */ |
| 338 |
err = set_reset_mode(dev); |
| 339 |
if (err) { |
| 340 |
netdev_err(dev, "could not enter reset mode\n"); |
| 341 |
return err; |
| 342 |
} |
| 343 |
|
| 344 |
/* set filters - we accept all */ |
| 345 |
writel(0x00000000, priv->base + SUN4I_REG_ACPC_ADDR + priv->acp_offset); |
| 346 |
writel(0xFFFFFFFF, priv->base + SUN4I_REG_ACPM_ADDR + priv->acp_offset); |
| 347 |
|
| 348 |
/* clear error counters and error code capture */ |
| 349 |
writel(0, priv->base + SUN4I_REG_ERRC_ADDR); |
| 350 |
|
| 351 |
/* enable interrupts */ |
| 352 |
if (priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING) |
| 353 |
writel(0xFF, priv->base + SUN4I_REG_INTEN_ADDR); |
| 354 |
else |
| 355 |
writel(0xFF & ~SUN4I_INTEN_BERR, |
| 356 |
priv->base + SUN4I_REG_INTEN_ADDR); |
| 357 |
|
| 358 |
/* enter the selected mode */ |
| 359 |
mod_reg_val = readl(priv->base + SUN4I_REG_MSEL_ADDR); |
| 360 |
if (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK) |
| 361 |
mod_reg_val |= SUN4I_MSEL_LOOPBACK_MODE; |
| 362 |
else if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY) |
| 363 |
mod_reg_val |= SUN4I_MSEL_LISTEN_ONLY_MODE; |
| 364 |
writel(mod_reg_val, priv->base + SUN4I_REG_MSEL_ADDR); |
| 365 |
|
| 366 |
err = sun4ican_set_bittiming(dev); |
| 367 |
if (err) |
| 368 |
return err; |
| 369 |
|
| 370 |
/* we are ready to enter the normal mode */ |
| 371 |
err = set_normal_mode(dev); |
| 372 |
if (err) { |
| 373 |
netdev_err(dev, "could not enter normal mode\n"); |
| 374 |
return err; |
| 375 |
} |
| 376 |
|
| 377 |
priv->can.state = CAN_STATE_ERROR_ACTIVE; |
| 378 |
|
| 379 |
return 0; |
| 380 |
} |
| 381 |
|
| 382 |
static int sun4i_can_stop(struct net_device *dev) |
| 383 |
{ |
| 384 |
struct sun4ican_priv *priv = netdev_priv(dev); |
| 385 |
int err; |
| 386 |
|
| 387 |
priv->can.state = CAN_STATE_STOPPED; |
| 388 |
/* we need to enter reset mode */ |
| 389 |
err = set_reset_mode(dev); |
| 390 |
if (err) { |
| 391 |
netdev_err(dev, "could not enter reset mode\n"); |
| 392 |
return err; |
| 393 |
} |
| 394 |
|
| 395 |
/* disable all interrupts */ |
| 396 |
writel(0, priv->base + SUN4I_REG_INTEN_ADDR); |
| 397 |
|
| 398 |
return 0; |
| 399 |
} |
| 400 |
|
| 401 |
static int sun4ican_set_mode(struct net_device *dev, enum can_mode mode) |
| 402 |
{ |
| 403 |
int err; |
| 404 |
|
| 405 |
switch (mode) { |
| 406 |
case CAN_MODE_START: |
| 407 |
err = sun4i_can_start(dev); |
| 408 |
if (err) { |
| 409 |
netdev_err(dev, "starting CAN controller failed!\n"); |
| 410 |
return err; |
| 411 |
} |
| 412 |
if (netif_queue_stopped(dev)) |
| 413 |
netif_wake_queue(dev); |
| 414 |
break; |
| 415 |
|
| 416 |
default: |
| 417 |
return -EOPNOTSUPP; |
| 418 |
} |
| 419 |
return 0; |
| 420 |
} |
| 421 |
|
| 422 |
/* transmit a CAN message |
| 423 |
* message layout in the sk_buff should be like this: |
| 424 |
* xx xx xx xx ff ll 00 11 22 33 44 55 66 77 |
| 425 |
* [ can_id ] [flags] [len] [can data (up to 8 bytes] |
| 426 |
*/ |
| 427 |
static netdev_tx_t sun4ican_start_xmit(struct sk_buff *skb, struct net_device *dev) |
| 428 |
{ |
| 429 |
struct sun4ican_priv *priv = netdev_priv(dev); |
| 430 |
struct can_frame *cf = (struct can_frame *)skb->data; |
| 431 |
u8 dlc; |
| 432 |
u32 dreg, msg_flag_n; |
| 433 |
canid_t id; |
| 434 |
int i; |
| 435 |
|
| 436 |
if (can_dev_dropped_skb(dev, skb)) |
| 437 |
return NETDEV_TX_OK; |
| 438 |
|
| 439 |
netif_stop_queue(dev); |
| 440 |
|
| 441 |
id = cf->can_id; |
| 442 |
dlc = cf->len; |
| 443 |
msg_flag_n = dlc; |
| 444 |
|
| 445 |
if (id & CAN_RTR_FLAG) |
| 446 |
msg_flag_n |= SUN4I_MSG_RTR_FLAG; |
| 447 |
|
| 448 |
if (id & CAN_EFF_FLAG) { |
| 449 |
msg_flag_n |= SUN4I_MSG_EFF_FLAG; |
| 450 |
dreg = SUN4I_REG_BUF5_ADDR; |
| 451 |
writel((id >> 21) & 0xFF, priv->base + SUN4I_REG_BUF1_ADDR); |
| 452 |
writel((id >> 13) & 0xFF, priv->base + SUN4I_REG_BUF2_ADDR); |
| 453 |
writel((id >> 5) & 0xFF, priv->base + SUN4I_REG_BUF3_ADDR); |
| 454 |
writel((id << 3) & 0xF8, priv->base + SUN4I_REG_BUF4_ADDR); |
| 455 |
} else { |
| 456 |
dreg = SUN4I_REG_BUF3_ADDR; |
| 457 |
writel((id >> 3) & 0xFF, priv->base + SUN4I_REG_BUF1_ADDR); |
| 458 |
writel((id << 5) & 0xE0, priv->base + SUN4I_REG_BUF2_ADDR); |
| 459 |
} |
| 460 |
|
| 461 |
for (i = 0; i < dlc; i++) |
| 462 |
writel(cf->data[i], priv->base + (dreg + i * 4)); |
| 463 |
|
| 464 |
writel(msg_flag_n, priv->base + SUN4I_REG_BUF0_ADDR); |
| 465 |
|
| 466 |
can_put_echo_skb(skb, dev, 0, 0); |
| 467 |
|
| 468 |
if (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK) |
| 469 |
sun4i_can_write_cmdreg(priv, SUN4I_CMD_SELF_RCV_REQ); |
| 470 |
else |
| 471 |
sun4i_can_write_cmdreg(priv, SUN4I_CMD_TRANS_REQ); |
| 472 |
|
| 473 |
return NETDEV_TX_OK; |
| 474 |
} |
| 475 |
|
| 476 |
static void sun4i_can_rx(struct net_device *dev) |
| 477 |
{ |
| 478 |
struct sun4ican_priv *priv = netdev_priv(dev); |
| 479 |
struct net_device_stats *stats = &dev->stats; |
| 480 |
struct can_frame *cf; |
| 481 |
struct sk_buff *skb; |
| 482 |
u8 fi; |
| 483 |
u32 dreg; |
| 484 |
canid_t id; |
| 485 |
int i; |
| 486 |
|
| 487 |
/* create zero'ed CAN frame buffer */ |
| 488 |
skb = alloc_can_skb(dev, &cf); |
| 489 |
if (!skb) |
| 490 |
return; |
| 491 |
|
| 492 |
fi = readl(priv->base + SUN4I_REG_BUF0_ADDR); |
| 493 |
cf->len = can_cc_dlc2len(fi & 0x0F); |
| 494 |
if (fi & SUN4I_MSG_EFF_FLAG) { |
| 495 |
dreg = SUN4I_REG_BUF5_ADDR; |
| 496 |
id = (readl(priv->base + SUN4I_REG_BUF1_ADDR) << 21) | |
| 497 |
(readl(priv->base + SUN4I_REG_BUF2_ADDR) << 13) | |
| 498 |
(readl(priv->base + SUN4I_REG_BUF3_ADDR) << 5) | |
| 499 |
((readl(priv->base + SUN4I_REG_BUF4_ADDR) >> 3) & 0x1f); |
| 500 |
id |= CAN_EFF_FLAG; |
| 501 |
} else { |
| 502 |
dreg = SUN4I_REG_BUF3_ADDR; |
| 503 |
id = (readl(priv->base + SUN4I_REG_BUF1_ADDR) << 3) | |
| 504 |
((readl(priv->base + SUN4I_REG_BUF2_ADDR) >> 5) & 0x7); |
| 505 |
} |
| 506 |
|
| 507 |
/* remote frame ? */ |
| 508 |
if (fi & SUN4I_MSG_RTR_FLAG) { |
| 509 |
id |= CAN_RTR_FLAG; |
| 510 |
} else { |
| 511 |
for (i = 0; i < cf->len; i++) |
| 512 |
cf->data[i] = readl(priv->base + dreg + i * 4); |
| 513 |
|
| 514 |
stats->rx_bytes += cf->len; |
| 515 |
} |
| 516 |
stats->rx_packets++; |
| 517 |
|
| 518 |
cf->can_id = id; |
| 519 |
|
| 520 |
sun4i_can_write_cmdreg(priv, SUN4I_CMD_RELEASE_RBUF); |
| 521 |
|
| 522 |
netif_rx(skb); |
| 523 |
} |
| 524 |
|
| 525 |
static int sun4i_can_err(struct net_device *dev, u8 isrc, u8 status) |
| 526 |
{ |
| 527 |
struct sun4ican_priv *priv = netdev_priv(dev); |
| 528 |
struct net_device_stats *stats = &dev->stats; |
| 529 |
struct can_frame *cf; |
| 530 |
struct sk_buff *skb; |
| 531 |
enum can_state state = priv->can.state; |
| 532 |
enum can_state rx_state, tx_state; |
| 533 |
unsigned int rxerr, txerr, errc; |
| 534 |
u32 ecc, alc; |
| 535 |
|
| 536 |
/* we don't skip if alloc fails because we want the stats anyhow */ |
| 537 |
skb = alloc_can_err_skb(dev, &cf); |
| 538 |
|
| 539 |
errc = readl(priv->base + SUN4I_REG_ERRC_ADDR); |
| 540 |
rxerr = (errc >> 16) & 0xFF; |
| 541 |
txerr = errc & 0xFF; |
| 542 |
|
| 543 |
if (isrc & SUN4I_INT_DATA_OR) { |
| 544 |
/* data overrun interrupt */ |
| 545 |
netdev_dbg(dev, "data overrun interrupt\n"); |
| 546 |
if (likely(skb)) { |
| 547 |
cf->can_id |= CAN_ERR_CRTL; |
| 548 |
cf->data[1] = CAN_ERR_CRTL_RX_OVERFLOW; |
| 549 |
} |
| 550 |
stats->rx_over_errors++; |
| 551 |
stats->rx_errors++; |
| 552 |
|
| 553 |
/* reset the CAN IP by entering reset mode |
| 554 |
* ignoring timeout error |
| 555 |
*/ |
| 556 |
set_reset_mode(dev); |
| 557 |
set_normal_mode(dev); |
| 558 |
|
| 559 |
/* clear bit */ |
| 560 |
sun4i_can_write_cmdreg(priv, SUN4I_CMD_CLEAR_OR_FLAG); |
| 561 |
} |
| 562 |
if (isrc & SUN4I_INT_ERR_WRN) { |
| 563 |
/* error warning interrupt */ |
| 564 |
netdev_dbg(dev, "error warning interrupt\n"); |
| 565 |
|
| 566 |
if (status & SUN4I_STA_BUS_OFF) |
| 567 |
state = CAN_STATE_BUS_OFF; |
| 568 |
else if (status & SUN4I_STA_ERR_STA) |
| 569 |
state = CAN_STATE_ERROR_WARNING; |
| 570 |
else |
| 571 |
state = CAN_STATE_ERROR_ACTIVE; |
| 572 |
} |
| 573 |
if (likely(skb) && state != CAN_STATE_BUS_OFF) { |
| 574 |
cf->can_id |= CAN_ERR_CNT; |
| 575 |
cf->data[6] = txerr; |
| 576 |
cf->data[7] = rxerr; |
| 577 |
} |
| 578 |
if (isrc & SUN4I_INT_BUS_ERR) { |
| 579 |
/* bus error interrupt */ |
| 580 |
netdev_dbg(dev, "bus error interrupt\n"); |
| 581 |
priv->can.can_stats.bus_error++; |
| 582 |
ecc = readl(priv->base + SUN4I_REG_STA_ADDR); |
| 583 |
|
| 584 |
if (likely(skb)) { |
| 585 |
cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR; |
| 586 |
|
| 587 |
switch (ecc & SUN4I_STA_MASK_ERR) { |
| 588 |
case SUN4I_STA_BIT_ERR: |
| 589 |
cf->data[2] |= CAN_ERR_PROT_BIT; |
| 590 |
break; |
| 591 |
case SUN4I_STA_FORM_ERR: |
| 592 |
cf->data[2] |= CAN_ERR_PROT_FORM; |
| 593 |
break; |
| 594 |
case SUN4I_STA_STUFF_ERR: |
| 595 |
cf->data[2] |= CAN_ERR_PROT_STUFF; |
| 596 |
break; |
| 597 |
default: |
| 598 |
cf->data[3] = (ecc & SUN4I_STA_ERR_SEG_CODE) |
| 599 |
>> 16; |
| 600 |
break; |
| 601 |
} |
| 602 |
} |
| 603 |
|
| 604 |
/* error occurred during transmission? */ |
| 605 |
if ((ecc & SUN4I_STA_ERR_DIR) == 0) { |
| 606 |
if (likely(skb)) |
| 607 |
cf->data[2] |= CAN_ERR_PROT_TX; |
| 608 |
stats->tx_errors++; |
| 609 |
} else { |
| 610 |
stats->rx_errors++; |
| 611 |
} |
| 612 |
} |
| 613 |
if (isrc & SUN4I_INT_ERR_PASSIVE) { |
| 614 |
/* error passive interrupt */ |
| 615 |
netdev_dbg(dev, "error passive interrupt\n"); |
| 616 |
if (state == CAN_STATE_ERROR_PASSIVE) |
| 617 |
state = CAN_STATE_ERROR_WARNING; |
| 618 |
else |
| 619 |
state = CAN_STATE_ERROR_PASSIVE; |
| 620 |
} |
| 621 |
if (isrc & SUN4I_INT_ARB_LOST) { |
| 622 |
/* arbitration lost interrupt */ |
| 623 |
netdev_dbg(dev, "arbitration lost interrupt\n"); |
| 624 |
alc = readl(priv->base + SUN4I_REG_STA_ADDR); |
| 625 |
priv->can.can_stats.arbitration_lost++; |
| 626 |
if (likely(skb)) { |
| 627 |
cf->can_id |= CAN_ERR_LOSTARB; |
| 628 |
cf->data[0] = (alc >> 8) & 0x1f; |
| 629 |
} |
| 630 |
} |
| 631 |
|
| 632 |
if (state != priv->can.state) { |
| 633 |
tx_state = txerr >= rxerr ? state : 0; |
| 634 |
rx_state = txerr <= rxerr ? state : 0; |
| 635 |
|
| 636 |
/* The skb allocation might fail, but can_change_state() |
| 637 |
* handles cf == NULL. |
| 638 |
*/ |
| 639 |
can_change_state(dev, cf, tx_state, rx_state); |
| 640 |
if (state == CAN_STATE_BUS_OFF) |
| 641 |
can_bus_off(dev); |
| 642 |
} |
| 643 |
|
| 644 |
if (likely(skb)) |
| 645 |
netif_rx(skb); |
| 646 |
else |
| 647 |
return -ENOMEM; |
| 648 |
|
| 649 |
return 0; |
| 650 |
} |
| 651 |
|
| 652 |
static irqreturn_t sun4i_can_interrupt(int irq, void *dev_id) |
| 653 |
{ |
| 654 |
struct net_device *dev = (struct net_device *)dev_id; |
| 655 |
struct sun4ican_priv *priv = netdev_priv(dev); |
| 656 |
struct net_device_stats *stats = &dev->stats; |
| 657 |
u8 isrc, status; |
| 658 |
int n = 0; |
| 659 |
|
| 660 |
while ((n < SUN4I_CAN_MAX_IRQ) && |
| 661 |
(isrc = readl(priv->base + SUN4I_REG_INT_ADDR))) { |
| 662 |
n++; |
| 663 |
status = readl(priv->base + SUN4I_REG_STA_ADDR); |
| 664 |
|
| 665 |
if (isrc & SUN4I_INT_WAKEUP) |
| 666 |
netdev_warn(dev, "wakeup interrupt\n"); |
| 667 |
|
| 668 |
if (isrc & SUN4I_INT_TBUF_VLD) { |
| 669 |
/* transmission complete interrupt */ |
| 670 |
stats->tx_bytes += can_get_echo_skb(dev, 0, NULL); |
| 671 |
stats->tx_packets++; |
| 672 |
netif_wake_queue(dev); |
| 673 |
} |
| 674 |
if ((isrc & SUN4I_INT_RBUF_VLD) && |
| 675 |
!(isrc & SUN4I_INT_DATA_OR)) { |
| 676 |
/* receive interrupt - don't read if overrun occurred */ |
| 677 |
while (status & SUN4I_STA_RBUF_RDY) { |
| 678 |
/* RX buffer is not empty */ |
| 679 |
sun4i_can_rx(dev); |
| 680 |
status = readl(priv->base + SUN4I_REG_STA_ADDR); |
| 681 |
} |
| 682 |
} |
| 683 |
if (isrc & |
| 684 |
(SUN4I_INT_DATA_OR | SUN4I_INT_ERR_WRN | SUN4I_INT_BUS_ERR | |
| 685 |
SUN4I_INT_ERR_PASSIVE | SUN4I_INT_ARB_LOST)) { |
| 686 |
/* error interrupt */ |
| 687 |
if (sun4i_can_err(dev, isrc, status)) |
| 688 |
netdev_err(dev, "can't allocate buffer - clearing pending interrupts\n"); |
| 689 |
} |
| 690 |
/* clear interrupts */ |
| 691 |
writel(isrc, priv->base + SUN4I_REG_INT_ADDR); |
| 692 |
readl(priv->base + SUN4I_REG_INT_ADDR); |
| 693 |
} |
| 694 |
if (n >= SUN4I_CAN_MAX_IRQ) |
| 695 |
netdev_dbg(dev, "%d messages handled in ISR", n); |
| 696 |
|
| 697 |
return (n) ? IRQ_HANDLED : IRQ_NONE; |
| 698 |
} |
| 699 |
|
| 700 |
static int sun4ican_open(struct net_device *dev) |
| 701 |
{ |
| 702 |
struct sun4ican_priv *priv = netdev_priv(dev); |
| 703 |
int err; |
| 704 |
|
| 705 |
/* common open */ |
| 706 |
err = open_candev(dev); |
| 707 |
if (err) |
| 708 |
return err; |
| 709 |
|
| 710 |
/* register interrupt handler */ |
| 711 |
err = request_irq(dev->irq, sun4i_can_interrupt, 0, dev->name, dev); |
| 712 |
if (err) { |
| 713 |
netdev_err(dev, "request_irq err: %d\n", err); |
| 714 |
goto exit_irq; |
| 715 |
} |
| 716 |
|
| 717 |
/* software reset deassert */ |
| 718 |
err = reset_control_deassert(priv->reset); |
| 719 |
if (err) { |
| 720 |
netdev_err(dev, "could not deassert CAN reset\n"); |
| 721 |
goto exit_soft_reset; |
| 722 |
} |
| 723 |
|
| 724 |
/* turn on clocking for CAN peripheral block */ |
| 725 |
err = clk_prepare_enable(priv->clk); |
| 726 |
if (err) { |
| 727 |
netdev_err(dev, "could not enable CAN peripheral clock\n"); |
| 728 |
goto exit_clock; |
| 729 |
} |
| 730 |
|
| 731 |
err = sun4i_can_start(dev); |
| 732 |
if (err) { |
| 733 |
netdev_err(dev, "could not start CAN peripheral\n"); |
| 734 |
goto exit_can_start; |
| 735 |
} |
| 736 |
|
| 737 |
netif_start_queue(dev); |
| 738 |
|
| 739 |
return 0; |
| 740 |
|
| 741 |
exit_can_start: |
| 742 |
clk_disable_unprepare(priv->clk); |
| 743 |
exit_clock: |
| 744 |
reset_control_assert(priv->reset); |
| 745 |
exit_soft_reset: |
| 746 |
free_irq(dev->irq, dev); |
| 747 |
exit_irq: |
| 748 |
close_candev(dev); |
| 749 |
return err; |
| 750 |
} |
| 751 |
|
| 752 |
static int sun4ican_close(struct net_device *dev) |
| 753 |
{ |
| 754 |
struct sun4ican_priv *priv = netdev_priv(dev); |
| 755 |
|
| 756 |
netif_stop_queue(dev); |
| 757 |
sun4i_can_stop(dev); |
| 758 |
clk_disable_unprepare(priv->clk); |
| 759 |
reset_control_assert(priv->reset); |
| 760 |
|
| 761 |
free_irq(dev->irq, dev); |
| 762 |
close_candev(dev); |
| 763 |
|
| 764 |
return 0; |
| 765 |
} |
| 766 |
|
| 767 |
static const struct net_device_ops sun4ican_netdev_ops = { |
| 768 |
.ndo_open = sun4ican_open, |
| 769 |
.ndo_stop = sun4ican_close, |
| 770 |
.ndo_start_xmit = sun4ican_start_xmit, |
| 771 |
}; |
| 772 |
|
| 773 |
static const struct ethtool_ops sun4ican_ethtool_ops = { |
| 774 |
.get_ts_info = ethtool_op_get_ts_info, |
| 775 |
}; |
| 776 |
|
| 777 |
static const struct sun4ican_quirks sun4ican_quirks_a10 = { |
| 778 |
.has_reset = false, |
| 779 |
.acp_offset = 0, |
| 780 |
}; |
| 781 |
|
| 782 |
static const struct sun4ican_quirks sun4ican_quirks_r40 = { |
| 783 |
.has_reset = true, |
| 784 |
.acp_offset = 0, |
| 785 |
}; |
| 786 |
|
| 787 |
static const struct sun4ican_quirks sun4ican_quirks_d1 = { |
| 788 |
.has_reset = true, |
| 789 |
.acp_offset = (SUN4I_REG_ACPC_ADDR_D1 - SUN4I_REG_ACPC_ADDR), |
| 790 |
}; |
| 791 |
|
| 792 |
static const struct of_device_id sun4ican_of_match[] = { |
| 793 |
{ |
| 794 |
.compatible = "allwinner,sun4i-a10-can", |
| 795 |
.data = &sun4ican_quirks_a10 |
| 796 |
}, { |
| 797 |
.compatible = "allwinner,sun7i-a20-can", |
| 798 |
.data = &sun4ican_quirks_a10 |
| 799 |
}, { |
| 800 |
.compatible = "allwinner,sun8i-r40-can", |
| 801 |
.data = &sun4ican_quirks_r40 |
| 802 |
}, { |
| 803 |
.compatible = "allwinner,sun20i-d1-can", |
| 804 |
.data = &sun4ican_quirks_d1 |
| 805 |
}, { |
| 806 |
/* sentinel */ |
| 807 |
}, |
| 808 |
}; |
| 809 |
|
| 810 |
MODULE_DEVICE_TABLE(of, sun4ican_of_match); |
| 811 |
|
| 812 |
static void sun4ican_remove(struct platform_device *pdev) |
| 813 |
{ |
| 814 |
struct net_device *dev = platform_get_drvdata(pdev); |
| 815 |
|
| 816 |
unregister_netdev(dev); |
| 817 |
free_candev(dev); |
| 818 |
} |
| 819 |
|
| 820 |
static int sun4ican_probe(struct platform_device *pdev) |
| 821 |
{ |
| 822 |
struct device_node *np = pdev->dev.of_node; |
| 823 |
struct clk *clk; |
| 824 |
struct reset_control *reset = NULL; |
| 825 |
void __iomem *addr; |
| 826 |
int err, irq; |
| 827 |
struct net_device *dev; |
| 828 |
struct sun4ican_priv *priv; |
| 829 |
const struct sun4ican_quirks *quirks; |
| 830 |
|
| 831 |
quirks = of_device_get_match_data(&pdev->dev); |
| 832 |
if (!quirks) { |
| 833 |
dev_err(&pdev->dev, "failed to determine the quirks to use\n"); |
| 834 |
err = -ENODEV; |
| 835 |
goto exit; |
| 836 |
} |
| 837 |
|
| 838 |
if (quirks->has_reset) { |
| 839 |
reset = devm_reset_control_get_exclusive(&pdev->dev, NULL); |
| 840 |
if (IS_ERR(reset)) { |
| 841 |
dev_err(&pdev->dev, "unable to request reset\n"); |
| 842 |
err = PTR_ERR(reset); |
| 843 |
goto exit; |
| 844 |
} |
| 845 |
} |
| 846 |
|
| 847 |
clk = of_clk_get(np, 0); |
| 848 |
if (IS_ERR(clk)) { |
| 849 |
dev_err(&pdev->dev, "unable to request clock\n"); |
| 850 |
err = -ENODEV; |
| 851 |
goto exit; |
| 852 |
} |
| 853 |
|
| 854 |
irq = platform_get_irq(pdev, 0); |
| 855 |
if (irq < 0) { |
| 856 |
err = -ENODEV; |
| 857 |
goto exit; |
| 858 |
} |
| 859 |
|
| 860 |
addr = devm_platform_ioremap_resource(pdev, 0); |
| 861 |
if (IS_ERR(addr)) { |
| 862 |
err = PTR_ERR(addr); |
| 863 |
goto exit; |
| 864 |
} |
| 865 |
|
| 866 |
dev = alloc_candev(sizeof(struct sun4ican_priv), 1); |
| 867 |
if (!dev) { |
| 868 |
dev_err(&pdev->dev, |
| 869 |
"could not allocate memory for CAN device\n"); |
| 870 |
err = -ENOMEM; |
| 871 |
goto exit; |
| 872 |
} |
| 873 |
|
| 874 |
dev->netdev_ops = &sun4ican_netdev_ops; |
| 875 |
dev->ethtool_ops = &sun4ican_ethtool_ops; |
| 876 |
dev->irq = irq; |
| 877 |
dev->flags |= IFF_ECHO; |
| 878 |
|
| 879 |
priv = netdev_priv(dev); |
| 880 |
priv->can.clock.freq = clk_get_rate(clk); |
| 881 |
priv->can.bittiming_const = &sun4ican_bittiming_const; |
| 882 |
priv->can.do_set_mode = sun4ican_set_mode; |
| 883 |
priv->can.do_get_berr_counter = sun4ican_get_berr_counter; |
| 884 |
priv->can.ctrlmode_supported = CAN_CTRLMODE_BERR_REPORTING | |
| 885 |
CAN_CTRLMODE_LISTENONLY | |
| 886 |
CAN_CTRLMODE_LOOPBACK | |
| 887 |
CAN_CTRLMODE_3_SAMPLES; |
| 888 |
priv->base = addr; |
| 889 |
priv->clk = clk; |
| 890 |
priv->reset = reset; |
| 891 |
priv->acp_offset = quirks->acp_offset; |
| 892 |
spin_lock_init(&priv->cmdreg_lock); |
| 893 |
|
| 894 |
platform_set_drvdata(pdev, dev); |
| 895 |
SET_NETDEV_DEV(dev, &pdev->dev); |
| 896 |
|
| 897 |
err = register_candev(dev); |
| 898 |
if (err) { |
| 899 |
dev_err(&pdev->dev, "registering %s failed (err=%d)\n", |
| 900 |
DRV_NAME, err); |
| 901 |
goto exit_free; |
| 902 |
} |
| 903 |
|
| 904 |
dev_info(&pdev->dev, "device registered (base=%p, irq=%d)\n", |
| 905 |
priv->base, dev->irq); |
| 906 |
|
| 907 |
return 0; |
| 908 |
|
| 909 |
exit_free: |
| 910 |
free_candev(dev); |
| 911 |
exit: |
| 912 |
return err; |
| 913 |
} |
| 914 |
|
| 915 |
static struct platform_driver sun4i_can_driver = { |
| 916 |
.driver = { |
| 917 |
.name = DRV_NAME, |
| 918 |
.of_match_table = sun4ican_of_match, |
| 919 |
}, |
| 920 |
.probe = sun4ican_probe, |
| 921 |
.remove = sun4ican_remove, |
| 922 |
}; |
| 923 |
|
| 924 |
module_platform_driver(sun4i_can_driver); |
| 925 |
|
| 926 |
MODULE_AUTHOR("Peter Chen <[email protected]>"); |
| 927 |
MODULE_AUTHOR("Gerhard Bertelsmann <[email protected]>"); |
| 928 |
MODULE_LICENSE("Dual BSD/GPL"); |
| 929 |
MODULE_DESCRIPTION("CAN driver for Allwinner SoCs (A10/A20/D1)"); |