Debian Codegraph @

drivers/net/can/sja1000/Kconfig

raw
1 # SPDX-License-Identifier: GPL-2.0-only
2
3 menuconfig CAN_SJA1000
4 tristate "Philips/NXP SJA1000 devices"
5 depends on HAS_IOMEM
6
7 if CAN_SJA1000
8
9 config CAN_EMS_PCI
10 tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card"
11 depends on PCI
12 help
13 This driver is for the one, two or four channel CPC-PCI,
14 CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche
15 (http://www.ems-wuensche.de).
16
17 config CAN_EMS_PCMCIA
18 tristate "EMS CPC-CARD Card"
19 depends on PCMCIA
20 help
21 This driver is for the one or two channel CPC-CARD cards from
22 EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
23
24 config CAN_F81601
25 tristate "Fintek F81601 PCIE to 2 CAN Controller"
26 depends on PCI
27 help
28 This driver adds support for Fintek F81601 PCIE to 2 CAN
29 Controller. It had internal 24MHz clock source, but it can
30 be changed by manufacturer. Use modinfo to get usage for
31 parameters. Visit http://www.fintek.com.tw to get more
32 information.
33
34 config CAN_KVASER_PCI
35 tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards"
36 depends on PCI
37 help
38 This driver is for the PCIcanx and PCIcan cards (1, 2 or
39 4 channel) from Kvaser (http://www.kvaser.com).
40
41 config CAN_PEAK_PCI
42 tristate "PEAK PCAN-PCI/PCIe/miniPCI Cards"
43 depends on PCI
44 help
45 This driver is for the PCAN-PCI/PCIe/miniPCI cards
46 (1, 2, 3 or 4 channels) from PEAK-System Technik
47 (http://www.peak-system.com).
48
49 config CAN_PEAK_PCIEC
50 bool "PEAK PCAN-ExpressCard Cards"
51 depends on CAN_PEAK_PCI
52 select I2C
53 select I2C_ALGOBIT
54 default y
55 help
56 Say Y here if you want to use a PCAN-ExpressCard from PEAK-System
57 Technik. This will also automatically select I2C and I2C_ALGO
58 configuration options.
59
60 config CAN_PEAK_PCMCIA
61 tristate "PEAK PCAN-PC Card"
62 depends on PCMCIA
63 depends on HAS_IOPORT_MAP
64 help
65 This driver is for the PCAN-PC Card PCMCIA adapter (1 or 2 channels)
66 from PEAK-System (http://www.peak-system.com). To compile this
67 driver as a module, choose M here: the module will be called
68 peak_pcmcia.
69
70 config CAN_PLX_PCI
71 tristate "PLX90xx PCI-bridge based Cards"
72 depends on PCI
73 help
74 This driver is for CAN interface cards based on
75 the PLX90xx PCI bridge.
76 Driver supports now:
77 - Adlink PCI-7841/cPCI-7841 card (http://www.adlinktech.com/)
78 - Adlink PCI-7841/cPCI-7841 SE card
79 - esd CAN-PCI/CPCI/PCI104/200 (http://www.esd.eu/)
80 - esd CAN-PCI/PMC/266
81 - esd CAN-PCIe/2000
82 - Marathon CAN-bus-PCI card (http://www.marathon.ru/)
83 - TEWS TECHNOLOGIES TPMC810 card (http://www.tews.com/)
84 - IXXAT Automation PC-I 04/PCI card (http://www.ixxat.com/)
85 - Connect Tech Inc. CANpro/104-Plus Opto (CRG001) card (http://www.connecttech.com)
86 - ASEM CAN raw - 2 isolated CAN channels (www.asem.it)
87
88 config CAN_SJA1000_ISA
89 tristate "ISA Bus based legacy SJA1000 driver"
90 depends on HAS_IOPORT
91 help
92 This driver adds legacy support for SJA1000 chips connected to
93 the ISA bus using I/O port, memory mapped or indirect access.
94
95 config CAN_SJA1000_PLATFORM
96 tristate "Generic Platform Bus based SJA1000 driver"
97 help
98 This driver adds support for the SJA1000 chips connected to
99 the "platform bus" (Linux abstraction for directly to the
100 processor attached devices). Which can be found on various
101 boards from Phytec (http://www.phytec.de) like the PCM027,
102 PCM038. It also provides the OpenFirmware "platform bus" found
103 on embedded systems with OpenFirmware bindings, e.g. if you
104 have a PowerPC based system you may want to enable this option.
105
106 config CAN_TSCAN1
107 tristate "TS-CAN1 PC104 boards"
108 depends on (ISA && PC104) || (COMPILE_TEST && HAS_IOPORT)
109 help
110 This driver is for Technologic Systems' TSCAN-1 PC104 boards.
111 https://www.embeddedts.com/products/TS-CAN1
112 The driver supports multiple boards and automatically configures them:
113 PLD IO base addresses are read from jumpers JP1 and JP2,
114 IRQ numbers are read from jumpers JP4 and JP5,
115 SJA1000 IO base addresses are chosen heuristically (first that works).
116
117 endif