| 1 |
/* |
| 2 |
* Linux ARCnet driver - COM90xx chipset (IO-mapped buffers) |
| 3 |
* |
| 4 |
* Written 1997 by David Woodhouse. |
| 5 |
* Written 1994-1999 by Avery Pennarun. |
| 6 |
* Written 1999-2000 by Martin Mares <[email protected]>. |
| 7 |
* Derived from skeleton.c by Donald Becker. |
| 8 |
* |
| 9 |
* Special thanks to Contemporary Controls, Inc. (www.ccontrols.com) |
| 10 |
* for sponsoring the further development of this driver. |
| 11 |
* |
| 12 |
* ********************** |
| 13 |
* |
| 14 |
* The original copyright of skeleton.c was as follows: |
| 15 |
* |
| 16 |
* skeleton.c Written 1993 by Donald Becker. |
| 17 |
* Copyright 1993 United States Government as represented by the |
| 18 |
* Director, National Security Agency. This software may only be used |
| 19 |
* and distributed according to the terms of the GNU General Public License as |
| 20 |
* modified by SRC, incorporated herein by reference. |
| 21 |
* |
| 22 |
* ********************** |
| 23 |
* |
| 24 |
* For more details, see drivers/net/arcnet.c |
| 25 |
* |
| 26 |
* ********************** |
| 27 |
*/ |
| 28 |
|
| 29 |
#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt |
| 30 |
|
| 31 |
#include <linux/kernel.h> |
| 32 |
#include <linux/module.h> |
| 33 |
#include <linux/moduleparam.h> |
| 34 |
#include <linux/ioport.h> |
| 35 |
#include <linux/delay.h> |
| 36 |
#include <linux/netdevice.h> |
| 37 |
#include <linux/memblock.h> |
| 38 |
#include <linux/init.h> |
| 39 |
#include <linux/interrupt.h> |
| 40 |
#include <linux/io.h> |
| 41 |
|
| 42 |
#include "arcdevice.h" |
| 43 |
#include "com9026.h" |
| 44 |
|
| 45 |
/* Internal function declarations */ |
| 46 |
|
| 47 |
static int com90io_found(struct net_device *dev); |
| 48 |
static void com90io_command(struct net_device *dev, int command); |
| 49 |
static int com90io_status(struct net_device *dev); |
| 50 |
static void com90io_setmask(struct net_device *dev, int mask); |
| 51 |
static int com90io_reset(struct net_device *dev, int really_reset); |
| 52 |
static void com90io_copy_to_card(struct net_device *dev, int bufnum, int offset, |
| 53 |
void *buf, int count); |
| 54 |
static void com90io_copy_from_card(struct net_device *dev, int bufnum, |
| 55 |
int offset, void *buf, int count); |
| 56 |
|
| 57 |
/* Handy defines for ARCnet specific stuff */ |
| 58 |
|
| 59 |
/* The number of low I/O ports used by the card. */ |
| 60 |
#define ARCNET_TOTAL_SIZE 16 |
| 61 |
|
| 62 |
/**************************************************************************** |
| 63 |
* * |
| 64 |
* IO-mapped operation routines * |
| 65 |
* * |
| 66 |
****************************************************************************/ |
| 67 |
|
| 68 |
#undef ONE_AT_A_TIME_TX |
| 69 |
#undef ONE_AT_A_TIME_RX |
| 70 |
|
| 71 |
static u_char get_buffer_byte(struct net_device *dev, unsigned offset) |
| 72 |
{ |
| 73 |
int ioaddr = dev->base_addr; |
| 74 |
|
| 75 |
arcnet_outb(offset >> 8, ioaddr, COM9026_REG_W_ADDR_HI); |
| 76 |
arcnet_outb(offset & 0xff, ioaddr, COM9026_REG_W_ADDR_LO); |
| 77 |
|
| 78 |
return arcnet_inb(ioaddr, COM9026_REG_RW_MEMDATA); |
| 79 |
} |
| 80 |
|
| 81 |
#ifdef ONE_AT_A_TIME_TX |
| 82 |
static void put_buffer_byte(struct net_device *dev, unsigned offset, |
| 83 |
u_char datum) |
| 84 |
{ |
| 85 |
int ioaddr = dev->base_addr; |
| 86 |
|
| 87 |
arcnet_outb(offset >> 8, ioaddr, COM9026_REG_W_ADDR_HI); |
| 88 |
arcnet_outb(offset & 0xff, ioaddr, COM9026_REG_W_ADDR_LO); |
| 89 |
|
| 90 |
arcnet_outb(datum, ioaddr, COM9026_REG_RW_MEMDATA); |
| 91 |
} |
| 92 |
|
| 93 |
#endif |
| 94 |
|
| 95 |
static void get_whole_buffer(struct net_device *dev, unsigned offset, |
| 96 |
unsigned length, char *dest) |
| 97 |
{ |
| 98 |
int ioaddr = dev->base_addr; |
| 99 |
|
| 100 |
arcnet_outb((offset >> 8) | AUTOINCflag, ioaddr, COM9026_REG_W_ADDR_HI); |
| 101 |
arcnet_outb(offset & 0xff, ioaddr, COM9026_REG_W_ADDR_LO); |
| 102 |
|
| 103 |
while (length--) |
| 104 |
#ifdef ONE_AT_A_TIME_RX |
| 105 |
*(dest++) = get_buffer_byte(dev, offset++); |
| 106 |
#else |
| 107 |
*(dest++) = arcnet_inb(ioaddr, COM9026_REG_RW_MEMDATA); |
| 108 |
#endif |
| 109 |
} |
| 110 |
|
| 111 |
static void put_whole_buffer(struct net_device *dev, unsigned offset, |
| 112 |
unsigned length, char *dest) |
| 113 |
{ |
| 114 |
int ioaddr = dev->base_addr; |
| 115 |
|
| 116 |
arcnet_outb((offset >> 8) | AUTOINCflag, ioaddr, COM9026_REG_W_ADDR_HI); |
| 117 |
arcnet_outb(offset & 0xff, ioaddr,COM9026_REG_W_ADDR_LO); |
| 118 |
|
| 119 |
while (length--) |
| 120 |
#ifdef ONE_AT_A_TIME_TX |
| 121 |
put_buffer_byte(dev, offset++, *(dest++)); |
| 122 |
#else |
| 123 |
arcnet_outb(*(dest++), ioaddr, COM9026_REG_RW_MEMDATA); |
| 124 |
#endif |
| 125 |
} |
| 126 |
|
| 127 |
/* We cannot probe for an IO mapped card either, although we can check that |
| 128 |
* it's where we were told it was, and even autoirq |
| 129 |
*/ |
| 130 |
static int __init com90io_probe(struct net_device *dev) |
| 131 |
{ |
| 132 |
int ioaddr = dev->base_addr, status; |
| 133 |
unsigned long airqmask; |
| 134 |
|
| 135 |
if (BUGLVL(D_NORMAL)) { |
| 136 |
pr_info("%s\n", "COM90xx IO-mapped mode support (by David Woodhouse et el.)"); |
| 137 |
pr_info("E-mail me if you actually test this driver, please!\n"); |
| 138 |
} |
| 139 |
|
| 140 |
if (!ioaddr) { |
| 141 |
arc_printk(D_NORMAL, dev, "No autoprobe for IO mapped cards; you must specify the base address!\n"); |
| 142 |
return -ENODEV; |
| 143 |
} |
| 144 |
if (!request_region(ioaddr, ARCNET_TOTAL_SIZE, "com90io probe")) { |
| 145 |
arc_printk(D_INIT_REASONS, dev, "IO request_region %x-%x failed\n", |
| 146 |
ioaddr, ioaddr + ARCNET_TOTAL_SIZE - 1); |
| 147 |
return -ENXIO; |
| 148 |
} |
| 149 |
if (arcnet_inb(ioaddr, COM9026_REG_R_STATUS) == 0xFF) { |
| 150 |
arc_printk(D_INIT_REASONS, dev, "IO address %x empty\n", |
| 151 |
ioaddr); |
| 152 |
goto err_out; |
| 153 |
} |
| 154 |
arcnet_inb(ioaddr, COM9026_REG_R_RESET); |
| 155 |
mdelay(RESETtime); |
| 156 |
|
| 157 |
status = arcnet_inb(ioaddr, COM9026_REG_R_STATUS); |
| 158 |
|
| 159 |
if ((status & 0x9D) != (NORXflag | RECONflag | TXFREEflag | RESETflag)) { |
| 160 |
arc_printk(D_INIT_REASONS, dev, "Status invalid (%Xh)\n", |
| 161 |
status); |
| 162 |
goto err_out; |
| 163 |
} |
| 164 |
arc_printk(D_INIT_REASONS, dev, "Status after reset: %X\n", status); |
| 165 |
|
| 166 |
arcnet_outb(CFLAGScmd | RESETclear | CONFIGclear, |
| 167 |
ioaddr, COM9026_REG_W_COMMAND); |
| 168 |
|
| 169 |
arc_printk(D_INIT_REASONS, dev, "Status after reset acknowledged: %X\n", |
| 170 |
status); |
| 171 |
|
| 172 |
status = arcnet_inb(ioaddr, COM9026_REG_R_STATUS); |
| 173 |
|
| 174 |
if (status & RESETflag) { |
| 175 |
arc_printk(D_INIT_REASONS, dev, "Eternal reset (status=%Xh)\n", |
| 176 |
status); |
| 177 |
goto err_out; |
| 178 |
} |
| 179 |
arcnet_outb((0x16 | IOMAPflag) & ~ENABLE16flag, |
| 180 |
ioaddr, COM9026_REG_RW_CONFIG); |
| 181 |
|
| 182 |
/* Read first loc'n of memory */ |
| 183 |
|
| 184 |
arcnet_outb(AUTOINCflag, ioaddr, COM9026_REG_W_ADDR_HI); |
| 185 |
arcnet_outb(0, ioaddr, COM9026_REG_W_ADDR_LO); |
| 186 |
|
| 187 |
status = arcnet_inb(ioaddr, COM9026_REG_RW_MEMDATA); |
| 188 |
if (status != 0xd1) { |
| 189 |
arc_printk(D_INIT_REASONS, dev, "Signature byte not found (%Xh instead).\n", |
| 190 |
status); |
| 191 |
goto err_out; |
| 192 |
} |
| 193 |
if (!dev->irq) { |
| 194 |
/* if we do this, we're sure to get an IRQ since the |
| 195 |
* card has just reset and the NORXflag is on until |
| 196 |
* we tell it to start receiving. |
| 197 |
*/ |
| 198 |
|
| 199 |
airqmask = probe_irq_on(); |
| 200 |
arcnet_outb(NORXflag, ioaddr, COM9026_REG_W_INTMASK); |
| 201 |
udelay(1); |
| 202 |
arcnet_outb(0, ioaddr, COM9026_REG_W_INTMASK); |
| 203 |
dev->irq = probe_irq_off(airqmask); |
| 204 |
|
| 205 |
if ((int)dev->irq <= 0) { |
| 206 |
arc_printk(D_INIT_REASONS, dev, "Autoprobe IRQ failed\n"); |
| 207 |
goto err_out; |
| 208 |
} |
| 209 |
} |
| 210 |
release_region(ioaddr, ARCNET_TOTAL_SIZE); /* end of probing */ |
| 211 |
return com90io_found(dev); |
| 212 |
|
| 213 |
err_out: |
| 214 |
release_region(ioaddr, ARCNET_TOTAL_SIZE); |
| 215 |
return -ENODEV; |
| 216 |
} |
| 217 |
|
| 218 |
/* Set up the struct net_device associated with this card. Called after |
| 219 |
* probing succeeds. |
| 220 |
*/ |
| 221 |
static int __init com90io_found(struct net_device *dev) |
| 222 |
{ |
| 223 |
struct arcnet_local *lp; |
| 224 |
int ioaddr = dev->base_addr; |
| 225 |
int err; |
| 226 |
|
| 227 |
/* Reserve the irq */ |
| 228 |
if (request_irq(dev->irq, arcnet_interrupt, 0, |
| 229 |
"arcnet (COM90xx-IO)", dev)) { |
| 230 |
arc_printk(D_NORMAL, dev, "Can't get IRQ %d!\n", dev->irq); |
| 231 |
return -ENODEV; |
| 232 |
} |
| 233 |
/* Reserve the I/O region */ |
| 234 |
if (!request_region(dev->base_addr, ARCNET_TOTAL_SIZE, |
| 235 |
"arcnet (COM90xx-IO)")) { |
| 236 |
free_irq(dev->irq, dev); |
| 237 |
return -EBUSY; |
| 238 |
} |
| 239 |
|
| 240 |
lp = netdev_priv(dev); |
| 241 |
lp->card_name = "COM90xx I/O"; |
| 242 |
lp->hw.command = com90io_command; |
| 243 |
lp->hw.status = com90io_status; |
| 244 |
lp->hw.intmask = com90io_setmask; |
| 245 |
lp->hw.reset = com90io_reset; |
| 246 |
lp->hw.owner = THIS_MODULE; |
| 247 |
lp->hw.copy_to_card = com90io_copy_to_card; |
| 248 |
lp->hw.copy_from_card = com90io_copy_from_card; |
| 249 |
|
| 250 |
lp->config = (0x16 | IOMAPflag) & ~ENABLE16flag; |
| 251 |
arcnet_outb(lp->config, ioaddr, COM9026_REG_RW_CONFIG); |
| 252 |
|
| 253 |
/* get and check the station ID from offset 1 in shmem */ |
| 254 |
|
| 255 |
arcnet_set_addr(dev, get_buffer_byte(dev, 1)); |
| 256 |
|
| 257 |
err = register_netdev(dev); |
| 258 |
if (err) { |
| 259 |
arcnet_outb(arcnet_inb(ioaddr, COM9026_REG_RW_CONFIG) & ~IOMAPflag, |
| 260 |
ioaddr, COM9026_REG_RW_CONFIG); |
| 261 |
free_irq(dev->irq, dev); |
| 262 |
release_region(dev->base_addr, ARCNET_TOTAL_SIZE); |
| 263 |
return err; |
| 264 |
} |
| 265 |
|
| 266 |
arc_printk(D_NORMAL, dev, "COM90IO: station %02Xh found at %03lXh, IRQ %d.\n", |
| 267 |
dev->dev_addr[0], dev->base_addr, dev->irq); |
| 268 |
|
| 269 |
return 0; |
| 270 |
} |
| 271 |
|
| 272 |
/* Do a hardware reset on the card, and set up necessary registers. |
| 273 |
* |
| 274 |
* This should be called as little as possible, because it disrupts the |
| 275 |
* token on the network (causes a RECON) and requires a significant delay. |
| 276 |
* |
| 277 |
* However, it does make sure the card is in a defined state. |
| 278 |
*/ |
| 279 |
static int com90io_reset(struct net_device *dev, int really_reset) |
| 280 |
{ |
| 281 |
struct arcnet_local *lp = netdev_priv(dev); |
| 282 |
short ioaddr = dev->base_addr; |
| 283 |
|
| 284 |
arc_printk(D_INIT, dev, "Resetting %s (status=%02Xh)\n", |
| 285 |
dev->name, arcnet_inb(ioaddr, COM9026_REG_R_STATUS)); |
| 286 |
|
| 287 |
if (really_reset) { |
| 288 |
/* reset the card */ |
| 289 |
arcnet_inb(ioaddr, COM9026_REG_R_RESET); |
| 290 |
mdelay(RESETtime); |
| 291 |
} |
| 292 |
/* Set the thing to IO-mapped, 8-bit mode */ |
| 293 |
lp->config = (0x1C | IOMAPflag) & ~ENABLE16flag; |
| 294 |
arcnet_outb(lp->config, ioaddr, COM9026_REG_RW_CONFIG); |
| 295 |
|
| 296 |
arcnet_outb(CFLAGScmd | RESETclear, ioaddr, COM9026_REG_W_COMMAND); |
| 297 |
/* clear flags & end reset */ |
| 298 |
arcnet_outb(CFLAGScmd | CONFIGclear, ioaddr, COM9026_REG_W_COMMAND); |
| 299 |
|
| 300 |
/* verify that the ARCnet signature byte is present */ |
| 301 |
if (get_buffer_byte(dev, 0) != TESTvalue) { |
| 302 |
arc_printk(D_NORMAL, dev, "reset failed: TESTvalue not present.\n"); |
| 303 |
return 1; |
| 304 |
} |
| 305 |
/* enable extended (512-byte) packets */ |
| 306 |
arcnet_outb(CONFIGcmd | EXTconf, ioaddr, COM9026_REG_W_COMMAND); |
| 307 |
/* done! return success. */ |
| 308 |
return 0; |
| 309 |
} |
| 310 |
|
| 311 |
static void com90io_command(struct net_device *dev, int cmd) |
| 312 |
{ |
| 313 |
short ioaddr = dev->base_addr; |
| 314 |
|
| 315 |
arcnet_outb(cmd, ioaddr, COM9026_REG_W_COMMAND); |
| 316 |
} |
| 317 |
|
| 318 |
static int com90io_status(struct net_device *dev) |
| 319 |
{ |
| 320 |
short ioaddr = dev->base_addr; |
| 321 |
|
| 322 |
return arcnet_inb(ioaddr, COM9026_REG_R_STATUS); |
| 323 |
} |
| 324 |
|
| 325 |
static void com90io_setmask(struct net_device *dev, int mask) |
| 326 |
{ |
| 327 |
short ioaddr = dev->base_addr; |
| 328 |
|
| 329 |
arcnet_outb(mask, ioaddr, COM9026_REG_W_INTMASK); |
| 330 |
} |
| 331 |
|
| 332 |
static void com90io_copy_to_card(struct net_device *dev, int bufnum, |
| 333 |
int offset, void *buf, int count) |
| 334 |
{ |
| 335 |
TIME(dev, "put_whole_buffer", count, |
| 336 |
put_whole_buffer(dev, bufnum * 512 + offset, count, buf)); |
| 337 |
} |
| 338 |
|
| 339 |
static void com90io_copy_from_card(struct net_device *dev, int bufnum, |
| 340 |
int offset, void *buf, int count) |
| 341 |
{ |
| 342 |
TIME(dev, "get_whole_buffer", count, |
| 343 |
get_whole_buffer(dev, bufnum * 512 + offset, count, buf)); |
| 344 |
} |
| 345 |
|
| 346 |
static int io; /* use the insmod io= irq= shmem= options */ |
| 347 |
static int irq; |
| 348 |
static char device[9]; /* use eg. device=arc1 to change name */ |
| 349 |
|
| 350 |
module_param_hw(io, int, ioport, 0); |
| 351 |
module_param_hw(irq, int, irq, 0); |
| 352 |
module_param_string(device, device, sizeof(device), 0); |
| 353 |
MODULE_DESCRIPTION("ARCnet COM90xx IO mapped chipset driver"); |
| 354 |
MODULE_LICENSE("GPL"); |
| 355 |
|
| 356 |
#ifndef MODULE |
| 357 |
static int __init com90io_setup(char *s) |
| 358 |
{ |
| 359 |
int ints[4]; |
| 360 |
|
| 361 |
s = get_options(s, 4, ints); |
| 362 |
if (!ints[0]) |
| 363 |
return 0; |
| 364 |
switch (ints[0]) { |
| 365 |
default: /* ERROR */ |
| 366 |
pr_err("Too many arguments\n"); |
| 367 |
fallthrough; |
| 368 |
case 2: /* IRQ */ |
| 369 |
irq = ints[2]; |
| 370 |
fallthrough; |
| 371 |
case 1: /* IO address */ |
| 372 |
io = ints[1]; |
| 373 |
} |
| 374 |
if (*s) |
| 375 |
snprintf(device, sizeof(device), "%s", s); |
| 376 |
return 1; |
| 377 |
} |
| 378 |
__setup("com90io=", com90io_setup); |
| 379 |
#endif |
| 380 |
|
| 381 |
static struct net_device *my_dev; |
| 382 |
|
| 383 |
static int __init com90io_init(void) |
| 384 |
{ |
| 385 |
struct net_device *dev; |
| 386 |
int err; |
| 387 |
|
| 388 |
dev = alloc_arcdev(device); |
| 389 |
if (!dev) |
| 390 |
return -ENOMEM; |
| 391 |
|
| 392 |
dev->base_addr = io; |
| 393 |
dev->irq = irq; |
| 394 |
if (dev->irq == 2) |
| 395 |
dev->irq = 9; |
| 396 |
|
| 397 |
err = com90io_probe(dev); |
| 398 |
|
| 399 |
if (err) { |
| 400 |
free_arcdev(dev); |
| 401 |
return err; |
| 402 |
} |
| 403 |
|
| 404 |
my_dev = dev; |
| 405 |
return 0; |
| 406 |
} |
| 407 |
|
| 408 |
static void __exit com90io_exit(void) |
| 409 |
{ |
| 410 |
struct net_device *dev = my_dev; |
| 411 |
int ioaddr = dev->base_addr; |
| 412 |
|
| 413 |
unregister_netdev(dev); |
| 414 |
|
| 415 |
/* In case the old driver is loaded later, |
| 416 |
* set the thing back to MMAP mode |
| 417 |
*/ |
| 418 |
arcnet_outb(arcnet_inb(ioaddr, COM9026_REG_RW_CONFIG) & ~IOMAPflag, |
| 419 |
ioaddr, COM9026_REG_RW_CONFIG); |
| 420 |
|
| 421 |
free_irq(dev->irq, dev); |
| 422 |
release_region(dev->base_addr, ARCNET_TOTAL_SIZE); |
| 423 |
free_arcdev(dev); |
| 424 |
} |
| 425 |
|
| 426 |
module_init(com90io_init) |
| 427 |
module_exit(com90io_exit) |