| 1 |
/* |
| 2 |
* Linux ARCnet driver - COM20020 chipset support |
| 3 |
* |
| 4 |
* Written 1997 by David Woodhouse. |
| 5 |
* Written 1994-1999 by Avery Pennarun. |
| 6 |
* Written 1999-2000 by Martin Mares <[email protected]>. |
| 7 |
* Derived from skeleton.c by Donald Becker. |
| 8 |
* |
| 9 |
* Special thanks to Contemporary Controls, Inc. (www.ccontrols.com) |
| 10 |
* for sponsoring the further development of this driver. |
| 11 |
* |
| 12 |
* ********************** |
| 13 |
* |
| 14 |
* The original copyright of skeleton.c was as follows: |
| 15 |
* |
| 16 |
* skeleton.c Written 1993 by Donald Becker. |
| 17 |
* Copyright 1993 United States Government as represented by the |
| 18 |
* Director, National Security Agency. This software may only be used |
| 19 |
* and distributed according to the terms of the GNU General Public License as |
| 20 |
* modified by SRC, incorporated herein by reference. |
| 21 |
* |
| 22 |
* ********************** |
| 23 |
* |
| 24 |
* For more details, see drivers/net/arcnet.c |
| 25 |
* |
| 26 |
* ********************** |
| 27 |
*/ |
| 28 |
|
| 29 |
#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt |
| 30 |
|
| 31 |
#include <linux/module.h> |
| 32 |
#include <linux/moduleparam.h> |
| 33 |
#include <linux/kernel.h> |
| 34 |
#include <linux/types.h> |
| 35 |
#include <linux/ioport.h> |
| 36 |
#include <linux/errno.h> |
| 37 |
#include <linux/delay.h> |
| 38 |
#include <linux/netdevice.h> |
| 39 |
#include <linux/init.h> |
| 40 |
#include <linux/interrupt.h> |
| 41 |
#include <linux/memblock.h> |
| 42 |
#include <linux/io.h> |
| 43 |
|
| 44 |
#include "arcdevice.h" |
| 45 |
#include "com20020.h" |
| 46 |
|
| 47 |
/* We cannot (yet) probe for an IO mapped card, although we can check that |
| 48 |
* it's where we were told it was, and even do autoirq. |
| 49 |
*/ |
| 50 |
static int __init com20020isa_probe(struct net_device *dev) |
| 51 |
{ |
| 52 |
int ioaddr; |
| 53 |
unsigned long airqmask; |
| 54 |
struct arcnet_local *lp = netdev_priv(dev); |
| 55 |
int err; |
| 56 |
|
| 57 |
if (BUGLVL(D_NORMAL)) |
| 58 |
pr_info("%s\n", "COM20020 ISA support (by David Woodhouse et al.)"); |
| 59 |
|
| 60 |
ioaddr = dev->base_addr; |
| 61 |
if (!ioaddr) { |
| 62 |
arc_printk(D_NORMAL, dev, "No autoprobe (yet) for IO mapped cards; you must specify the base address!\n"); |
| 63 |
return -ENODEV; |
| 64 |
} |
| 65 |
if (!request_region(ioaddr, ARCNET_TOTAL_SIZE, "arcnet (COM20020)")) { |
| 66 |
arc_printk(D_NORMAL, dev, "IO region %xh-%xh already allocated.\n", |
| 67 |
ioaddr, ioaddr + ARCNET_TOTAL_SIZE - 1); |
| 68 |
return -ENXIO; |
| 69 |
} |
| 70 |
if (arcnet_inb(ioaddr, COM20020_REG_R_STATUS) == 0xFF) { |
| 71 |
arc_printk(D_NORMAL, dev, "IO address %x empty\n", ioaddr); |
| 72 |
err = -ENODEV; |
| 73 |
goto out; |
| 74 |
} |
| 75 |
if (com20020_check(dev)) { |
| 76 |
err = -ENODEV; |
| 77 |
goto out; |
| 78 |
} |
| 79 |
|
| 80 |
if (!dev->irq) { |
| 81 |
/* if we do this, we're sure to get an IRQ since the |
| 82 |
* card has just reset and the NORXflag is on until |
| 83 |
* we tell it to start receiving. |
| 84 |
*/ |
| 85 |
arc_printk(D_INIT_REASONS, dev, "intmask was %02Xh\n", |
| 86 |
arcnet_inb(ioaddr, COM20020_REG_R_STATUS)); |
| 87 |
arcnet_outb(0, ioaddr, COM20020_REG_W_INTMASK); |
| 88 |
airqmask = probe_irq_on(); |
| 89 |
arcnet_outb(NORXflag, ioaddr, COM20020_REG_W_INTMASK); |
| 90 |
udelay(1); |
| 91 |
arcnet_outb(0, ioaddr, COM20020_REG_W_INTMASK); |
| 92 |
dev->irq = probe_irq_off(airqmask); |
| 93 |
|
| 94 |
if ((int)dev->irq <= 0) { |
| 95 |
arc_printk(D_INIT_REASONS, dev, "Autoprobe IRQ failed first time\n"); |
| 96 |
airqmask = probe_irq_on(); |
| 97 |
arcnet_outb(NORXflag, ioaddr, COM20020_REG_W_INTMASK); |
| 98 |
udelay(5); |
| 99 |
arcnet_outb(0, ioaddr, COM20020_REG_W_INTMASK); |
| 100 |
dev->irq = probe_irq_off(airqmask); |
| 101 |
if ((int)dev->irq <= 0) { |
| 102 |
arc_printk(D_NORMAL, dev, "Autoprobe IRQ failed.\n"); |
| 103 |
err = -ENODEV; |
| 104 |
goto out; |
| 105 |
} |
| 106 |
} |
| 107 |
} |
| 108 |
|
| 109 |
lp->card_name = "ISA COM20020"; |
| 110 |
|
| 111 |
err = com20020_found(dev, 0); |
| 112 |
if (err != 0) |
| 113 |
goto out; |
| 114 |
|
| 115 |
return 0; |
| 116 |
|
| 117 |
out: |
| 118 |
release_region(ioaddr, ARCNET_TOTAL_SIZE); |
| 119 |
return err; |
| 120 |
} |
| 121 |
|
| 122 |
static int node = 0; |
| 123 |
static int io = 0x0; /* <--- EDIT THESE LINES FOR YOUR CONFIGURATION */ |
| 124 |
static int irq = 0; /* or use the insmod io= irq= shmem= options */ |
| 125 |
static char device[9]; /* use eg. device="arc1" to change name */ |
| 126 |
static int timeout = 3; |
| 127 |
static int backplane = 0; |
| 128 |
static int clockp = 0; |
| 129 |
static int clockm = 0; |
| 130 |
|
| 131 |
module_param(node, int, 0); |
| 132 |
module_param_hw(io, int, ioport, 0); |
| 133 |
module_param_hw(irq, int, irq, 0); |
| 134 |
module_param_string(device, device, sizeof(device), 0); |
| 135 |
module_param(timeout, int, 0); |
| 136 |
module_param(backplane, int, 0); |
| 137 |
module_param(clockp, int, 0); |
| 138 |
module_param(clockm, int, 0); |
| 139 |
|
| 140 |
MODULE_DESCRIPTION("ARCnet COM20020 chipset ISA driver"); |
| 141 |
MODULE_LICENSE("GPL"); |
| 142 |
|
| 143 |
static struct net_device *my_dev; |
| 144 |
|
| 145 |
static int __init com20020_init(void) |
| 146 |
{ |
| 147 |
struct net_device *dev; |
| 148 |
struct arcnet_local *lp; |
| 149 |
|
| 150 |
dev = alloc_arcdev(device); |
| 151 |
if (!dev) |
| 152 |
return -ENOMEM; |
| 153 |
|
| 154 |
if (node && node != 0xff) |
| 155 |
arcnet_set_addr(dev, node); |
| 156 |
|
| 157 |
dev->netdev_ops = &com20020_netdev_ops; |
| 158 |
|
| 159 |
lp = netdev_priv(dev); |
| 160 |
lp->backplane = backplane; |
| 161 |
lp->clockp = clockp & 7; |
| 162 |
lp->clockm = clockm & 3; |
| 163 |
lp->timeout = timeout & 3; |
| 164 |
lp->hw.owner = THIS_MODULE; |
| 165 |
|
| 166 |
dev->base_addr = io; |
| 167 |
dev->irq = irq; |
| 168 |
|
| 169 |
if (dev->irq == 2) |
| 170 |
dev->irq = 9; |
| 171 |
|
| 172 |
if (com20020isa_probe(dev)) { |
| 173 |
free_arcdev(dev); |
| 174 |
return -EIO; |
| 175 |
} |
| 176 |
|
| 177 |
my_dev = dev; |
| 178 |
return 0; |
| 179 |
} |
| 180 |
|
| 181 |
static void __exit com20020_exit(void) |
| 182 |
{ |
| 183 |
unregister_netdev(my_dev); |
| 184 |
free_irq(my_dev->irq, my_dev); |
| 185 |
release_region(my_dev->base_addr, ARCNET_TOTAL_SIZE); |
| 186 |
free_arcdev(my_dev); |
| 187 |
} |
| 188 |
|
| 189 |
#ifndef MODULE |
| 190 |
static int __init com20020isa_setup(char *s) |
| 191 |
{ |
| 192 |
int ints[8]; |
| 193 |
|
| 194 |
s = get_options(s, 8, ints); |
| 195 |
if (!ints[0]) |
| 196 |
return 1; |
| 197 |
|
| 198 |
switch (ints[0]) { |
| 199 |
default: /* ERROR */ |
| 200 |
pr_info("Too many arguments\n"); |
| 201 |
fallthrough; |
| 202 |
case 6: /* Timeout */ |
| 203 |
timeout = ints[6]; |
| 204 |
fallthrough; |
| 205 |
case 5: /* CKP value */ |
| 206 |
clockp = ints[5]; |
| 207 |
fallthrough; |
| 208 |
case 4: /* Backplane flag */ |
| 209 |
backplane = ints[4]; |
| 210 |
fallthrough; |
| 211 |
case 3: /* Node ID */ |
| 212 |
node = ints[3]; |
| 213 |
fallthrough; |
| 214 |
case 2: /* IRQ */ |
| 215 |
irq = ints[2]; |
| 216 |
fallthrough; |
| 217 |
case 1: /* IO address */ |
| 218 |
io = ints[1]; |
| 219 |
} |
| 220 |
if (*s) |
| 221 |
snprintf(device, sizeof(device), "%s", s); |
| 222 |
return 1; |
| 223 |
} |
| 224 |
|
| 225 |
__setup("com20020=", com20020isa_setup); |
| 226 |
|
| 227 |
#endif /* MODULE */ |
| 228 |
|
| 229 |
module_init(com20020_init) |
| 230 |
module_exit(com20020_exit) |