| 1 |
/* |
| 2 |
* Linux ARCnet driver - "cap mode" packet encapsulation. |
| 3 |
* It adds sequence numbers to packets for communicating between a user space |
| 4 |
* application and the driver. After a transmit it sends a packet with protocol |
| 5 |
* byte 0 back up to the userspace containing the sequence number of the packet |
| 6 |
* plus the transmit-status on the ArcNet. |
| 7 |
* |
| 8 |
* Written 2002-4 by Esben Nielsen, Vestas Wind Systems A/S |
| 9 |
* Derived from arc-rawmode.c by Avery Pennarun. |
| 10 |
* arc-rawmode was in turned based on skeleton.c, see below. |
| 11 |
* |
| 12 |
* ********************** |
| 13 |
* |
| 14 |
* The original copyright of skeleton.c was as follows: |
| 15 |
* |
| 16 |
* skeleton.c Written 1993 by Donald Becker. |
| 17 |
* Copyright 1993 United States Government as represented by the |
| 18 |
* Director, National Security Agency. This software may only be used |
| 19 |
* and distributed according to the terms of the GNU General Public License as |
| 20 |
* modified by SRC, incorporated herein by reference. |
| 21 |
* |
| 22 |
* ********************** |
| 23 |
* |
| 24 |
* For more details, see drivers/net/arcnet.c |
| 25 |
* |
| 26 |
* ********************** |
| 27 |
*/ |
| 28 |
|
| 29 |
#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt |
| 30 |
|
| 31 |
#include <linux/module.h> |
| 32 |
#include <linux/gfp.h> |
| 33 |
#include <linux/init.h> |
| 34 |
#include <linux/if_arp.h> |
| 35 |
#include <net/arp.h> |
| 36 |
#include <linux/netdevice.h> |
| 37 |
#include <linux/skbuff.h> |
| 38 |
|
| 39 |
#include "arcdevice.h" |
| 40 |
|
| 41 |
/* packet receiver */ |
| 42 |
static void rx(struct net_device *dev, int bufnum, |
| 43 |
struct archdr *pkthdr, int length) |
| 44 |
{ |
| 45 |
struct arcnet_local *lp = netdev_priv(dev); |
| 46 |
struct sk_buff *skb; |
| 47 |
struct archdr *pkt; |
| 48 |
char *pktbuf, *pkthdrbuf; |
| 49 |
int ofs; |
| 50 |
|
| 51 |
arc_printk(D_DURING, dev, "it's a raw(cap) packet (length=%d)\n", |
| 52 |
length); |
| 53 |
|
| 54 |
if (length >= MinTU) |
| 55 |
ofs = 512 - length; |
| 56 |
else |
| 57 |
ofs = 256 - length; |
| 58 |
|
| 59 |
skb = alloc_skb(length + ARC_HDR_SIZE + sizeof(int), GFP_ATOMIC); |
| 60 |
if (!skb) { |
| 61 |
dev->stats.rx_dropped++; |
| 62 |
return; |
| 63 |
} |
| 64 |
skb_put(skb, length + ARC_HDR_SIZE + sizeof(int)); |
| 65 |
skb->dev = dev; |
| 66 |
skb_reset_mac_header(skb); |
| 67 |
pkt = (struct archdr *)skb_mac_header(skb); |
| 68 |
skb_pull(skb, ARC_HDR_SIZE); |
| 69 |
|
| 70 |
/* up to sizeof(pkt->soft) has already been copied from the card |
| 71 |
* squeeze in an int for the cap encapsulation |
| 72 |
* use these variables to be sure we count in bytes, not in |
| 73 |
* sizeof(struct archdr) |
| 74 |
*/ |
| 75 |
pktbuf = (char *)pkt; |
| 76 |
pkthdrbuf = (char *)pkthdr; |
| 77 |
memcpy(pktbuf, pkthdrbuf, ARC_HDR_SIZE + sizeof(pkt->soft.cap.proto)); |
| 78 |
memcpy(pktbuf + ARC_HDR_SIZE + sizeof(pkt->soft.cap.proto) + sizeof(int), |
| 79 |
pkthdrbuf + ARC_HDR_SIZE + sizeof(pkt->soft.cap.proto), |
| 80 |
sizeof(struct archdr) - ARC_HDR_SIZE - sizeof(pkt->soft.cap.proto)); |
| 81 |
|
| 82 |
if (length > sizeof(pkt->soft)) |
| 83 |
lp->hw.copy_from_card(dev, bufnum, ofs + sizeof(pkt->soft), |
| 84 |
pkt->soft.raw + sizeof(pkt->soft) |
| 85 |
+ sizeof(int), |
| 86 |
length - sizeof(pkt->soft)); |
| 87 |
|
| 88 |
if (BUGLVL(D_SKB)) |
| 89 |
arcnet_dump_skb(dev, skb, "rx"); |
| 90 |
|
| 91 |
skb->protocol = cpu_to_be16(ETH_P_ARCNET); |
| 92 |
netif_rx(skb); |
| 93 |
} |
| 94 |
|
| 95 |
/* Create the ARCnet hard/soft headers for cap mode. |
| 96 |
* There aren't any soft headers in cap mode - not even the protocol id. |
| 97 |
*/ |
| 98 |
static int build_header(struct sk_buff *skb, |
| 99 |
struct net_device *dev, |
| 100 |
unsigned short type, |
| 101 |
uint8_t daddr) |
| 102 |
{ |
| 103 |
int hdr_size = ARC_HDR_SIZE; |
| 104 |
struct archdr *pkt = skb_push(skb, hdr_size); |
| 105 |
|
| 106 |
arc_printk(D_PROTO, dev, "Preparing header for cap packet %x.\n", |
| 107 |
*((int *)&pkt->soft.cap.cookie[0])); |
| 108 |
|
| 109 |
/* Set the source hardware address. |
| 110 |
* |
| 111 |
* This is pretty pointless for most purposes, but it can help in |
| 112 |
* debugging. ARCnet does not allow us to change the source address in |
| 113 |
* the actual packet sent) |
| 114 |
*/ |
| 115 |
pkt->hard.source = *dev->dev_addr; |
| 116 |
|
| 117 |
/* see linux/net/ethernet/eth.c to see where I got the following */ |
| 118 |
|
| 119 |
if (dev->flags & (IFF_LOOPBACK | IFF_NOARP)) { |
| 120 |
/* FIXME: fill in the last byte of the dest ipaddr here to |
| 121 |
* better comply with RFC1051 in "noarp" mode. |
| 122 |
*/ |
| 123 |
pkt->hard.dest = 0; |
| 124 |
return hdr_size; |
| 125 |
} |
| 126 |
/* otherwise, just fill it in and go! */ |
| 127 |
pkt->hard.dest = daddr; |
| 128 |
|
| 129 |
return hdr_size; /* success */ |
| 130 |
} |
| 131 |
|
| 132 |
static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length, |
| 133 |
int bufnum) |
| 134 |
{ |
| 135 |
struct arcnet_local *lp = netdev_priv(dev); |
| 136 |
struct arc_hardware *hard = &pkt->hard; |
| 137 |
int ofs; |
| 138 |
|
| 139 |
/* hard header is not included in packet length */ |
| 140 |
length -= ARC_HDR_SIZE; |
| 141 |
/* And neither is the cookie field */ |
| 142 |
length -= sizeof(int); |
| 143 |
|
| 144 |
arc_printk(D_DURING, dev, "prepare_tx: txbufs=%d/%d/%d\n", |
| 145 |
lp->next_tx, lp->cur_tx, bufnum); |
| 146 |
|
| 147 |
arc_printk(D_PROTO, dev, "Sending for cap packet %x.\n", |
| 148 |
*((int *)&pkt->soft.cap.cookie[0])); |
| 149 |
|
| 150 |
if (length > XMTU) { |
| 151 |
/* should never happen! other people already check for this. */ |
| 152 |
arc_printk(D_NORMAL, dev, "Bug! prepare_tx with size %d (> %d)\n", |
| 153 |
length, XMTU); |
| 154 |
length = XMTU; |
| 155 |
} |
| 156 |
if (length > MinTU) { |
| 157 |
hard->offset[0] = 0; |
| 158 |
hard->offset[1] = ofs = 512 - length; |
| 159 |
} else if (length > MTU) { |
| 160 |
hard->offset[0] = 0; |
| 161 |
hard->offset[1] = ofs = 512 - length - 3; |
| 162 |
} else { |
| 163 |
hard->offset[0] = ofs = 256 - length; |
| 164 |
} |
| 165 |
|
| 166 |
arc_printk(D_DURING, dev, "prepare_tx: length=%d ofs=%d\n", |
| 167 |
length, ofs); |
| 168 |
|
| 169 |
/* Copy the arcnet-header + the protocol byte down: */ |
| 170 |
lp->hw.copy_to_card(dev, bufnum, 0, hard, ARC_HDR_SIZE); |
| 171 |
lp->hw.copy_to_card(dev, bufnum, ofs, &pkt->soft.cap.proto, |
| 172 |
sizeof(pkt->soft.cap.proto)); |
| 173 |
|
| 174 |
/* Skip the extra integer we have written into it as a cookie |
| 175 |
* but write the rest of the message: |
| 176 |
*/ |
| 177 |
lp->hw.copy_to_card(dev, bufnum, ofs + 1, |
| 178 |
((unsigned char *)&pkt->soft.cap.mes), length - 1); |
| 179 |
|
| 180 |
lp->lastload_dest = hard->dest; |
| 181 |
|
| 182 |
return 1; /* done */ |
| 183 |
} |
| 184 |
|
| 185 |
static int ack_tx(struct net_device *dev, int acked) |
| 186 |
{ |
| 187 |
struct arcnet_local *lp = netdev_priv(dev); |
| 188 |
struct sk_buff *ackskb; |
| 189 |
struct archdr *ackpkt; |
| 190 |
int length = sizeof(struct arc_cap); |
| 191 |
|
| 192 |
arc_printk(D_DURING, dev, "capmode: ack_tx: protocol: %x: result: %d\n", |
| 193 |
lp->outgoing.skb->protocol, acked); |
| 194 |
|
| 195 |
if (BUGLVL(D_SKB)) |
| 196 |
arcnet_dump_skb(dev, lp->outgoing.skb, "ack_tx"); |
| 197 |
|
| 198 |
/* Now alloc a skb to send back up through the layers: */ |
| 199 |
ackskb = alloc_skb(length + ARC_HDR_SIZE, GFP_ATOMIC); |
| 200 |
if (!ackskb) |
| 201 |
goto free_outskb; |
| 202 |
|
| 203 |
skb_put(ackskb, length + ARC_HDR_SIZE); |
| 204 |
ackskb->dev = dev; |
| 205 |
|
| 206 |
skb_reset_mac_header(ackskb); |
| 207 |
ackpkt = (struct archdr *)skb_mac_header(ackskb); |
| 208 |
/* skb_pull(ackskb, ARC_HDR_SIZE); */ |
| 209 |
|
| 210 |
skb_copy_from_linear_data(lp->outgoing.skb, ackpkt, |
| 211 |
ARC_HDR_SIZE + sizeof(struct arc_cap)); |
| 212 |
ackpkt->soft.cap.proto = 0; /* using protocol 0 for acknowledge */ |
| 213 |
ackpkt->soft.cap.mes.ack = acked; |
| 214 |
|
| 215 |
arc_printk(D_PROTO, dev, "Acknowledge for cap packet %x.\n", |
| 216 |
*((int *)&ackpkt->soft.cap.cookie[0])); |
| 217 |
|
| 218 |
ackskb->protocol = cpu_to_be16(ETH_P_ARCNET); |
| 219 |
|
| 220 |
if (BUGLVL(D_SKB)) |
| 221 |
arcnet_dump_skb(dev, ackskb, "ack_tx_recv"); |
| 222 |
netif_rx(ackskb); |
| 223 |
|
| 224 |
free_outskb: |
| 225 |
dev_kfree_skb_irq(lp->outgoing.skb); |
| 226 |
lp->outgoing.proto = NULL; |
| 227 |
/* We are always finished when in this protocol */ |
| 228 |
|
| 229 |
return 0; |
| 230 |
} |
| 231 |
|
| 232 |
static struct ArcProto capmode_proto = { |
| 233 |
.suffix = 'r', |
| 234 |
.mtu = XMTU, |
| 235 |
.rx = rx, |
| 236 |
.build_header = build_header, |
| 237 |
.prepare_tx = prepare_tx, |
| 238 |
.ack_tx = ack_tx |
| 239 |
}; |
| 240 |
|
| 241 |
static int __init capmode_module_init(void) |
| 242 |
{ |
| 243 |
int count; |
| 244 |
|
| 245 |
pr_info("cap mode (`c') encapsulation support loaded\n"); |
| 246 |
|
| 247 |
for (count = 1; count <= 8; count++) |
| 248 |
if (arc_proto_map[count] == arc_proto_default) |
| 249 |
arc_proto_map[count] = &capmode_proto; |
| 250 |
|
| 251 |
/* for cap mode, we only set the bcast proto if there's no better one */ |
| 252 |
if (arc_bcast_proto == arc_proto_default) |
| 253 |
arc_bcast_proto = &capmode_proto; |
| 254 |
|
| 255 |
arc_proto_default = &capmode_proto; |
| 256 |
arc_raw_proto = &capmode_proto; |
| 257 |
|
| 258 |
return 0; |
| 259 |
} |
| 260 |
|
| 261 |
static void __exit capmode_module_exit(void) |
| 262 |
{ |
| 263 |
arcnet_unregister_proto(&capmode_proto); |
| 264 |
} |
| 265 |
module_init(capmode_module_init); |
| 266 |
module_exit(capmode_module_exit); |
| 267 |
|
| 268 |
MODULE_DESCRIPTION("ARCnet CAP mode packet interface module"); |
| 269 |
MODULE_LICENSE("GPL"); |