| 1 |
/* |
| 2 |
* Linux ARCnet driver - COM20020 chipset support |
| 3 |
* |
| 4 |
* Written 1997 by David Woodhouse. |
| 5 |
* Written 1994-1999 by Avery Pennarun. |
| 6 |
* Written 1999 by Martin Mares <[email protected]>. |
| 7 |
* Derived from skeleton.c by Donald Becker. |
| 8 |
* |
| 9 |
* Special thanks to Contemporary Controls, Inc. (www.ccontrols.com) |
| 10 |
* for sponsoring the further development of this driver. |
| 11 |
* |
| 12 |
* ********************** |
| 13 |
* |
| 14 |
* The original copyright of skeleton.c was as follows: |
| 15 |
* |
| 16 |
* skeleton.c Written 1993 by Donald Becker. |
| 17 |
* Copyright 1993 United States Government as represented by the |
| 18 |
* Director, National Security Agency. This software may only be used |
| 19 |
* and distributed according to the terms of the GNU General Public License as |
| 20 |
* modified by SRC, incorporated herein by reference. |
| 21 |
* |
| 22 |
* ********************** |
| 23 |
* |
| 24 |
* For more details, see drivers/net/arcnet.c |
| 25 |
* |
| 26 |
* ********************** |
| 27 |
*/ |
| 28 |
|
| 29 |
#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt |
| 30 |
|
| 31 |
#include <linux/module.h> |
| 32 |
#include <linux/kernel.h> |
| 33 |
#include <linux/types.h> |
| 34 |
#include <linux/ioport.h> |
| 35 |
#include <linux/errno.h> |
| 36 |
#include <linux/delay.h> |
| 37 |
#include <linux/netdevice.h> |
| 38 |
#include <linux/init.h> |
| 39 |
#include <linux/interrupt.h> |
| 40 |
#include <linux/io.h> |
| 41 |
|
| 42 |
#include "arcdevice.h" |
| 43 |
#include "com20020.h" |
| 44 |
|
| 45 |
static const char * const clockrates[] = { |
| 46 |
"XXXXXXX", "XXXXXXXX", "XXXXXX", "2.5 Mb/s", |
| 47 |
"1.25Mb/s", "625 Kb/s", "312.5 Kb/s", "156.25 Kb/s", |
| 48 |
"Reserved", "Reserved", "Reserved" |
| 49 |
}; |
| 50 |
|
| 51 |
static void com20020_command(struct net_device *dev, int command); |
| 52 |
static int com20020_status(struct net_device *dev); |
| 53 |
static void com20020_setmask(struct net_device *dev, int mask); |
| 54 |
static int com20020_reset(struct net_device *dev, int really_reset); |
| 55 |
static void com20020_copy_to_card(struct net_device *dev, int bufnum, |
| 56 |
int offset, void *buf, int count); |
| 57 |
static void com20020_copy_from_card(struct net_device *dev, int bufnum, |
| 58 |
int offset, void *buf, int count); |
| 59 |
static void com20020_set_mc_list(struct net_device *dev); |
| 60 |
static void com20020_close(struct net_device *); |
| 61 |
|
| 62 |
static void com20020_copy_from_card(struct net_device *dev, int bufnum, |
| 63 |
int offset, void *buf, int count) |
| 64 |
{ |
| 65 |
int ioaddr = dev->base_addr, ofs = 512 * bufnum + offset; |
| 66 |
|
| 67 |
/* set up the address register */ |
| 68 |
arcnet_outb((ofs >> 8) | RDDATAflag | AUTOINCflag, |
| 69 |
ioaddr, COM20020_REG_W_ADDR_HI); |
| 70 |
arcnet_outb(ofs & 0xff, ioaddr, COM20020_REG_W_ADDR_LO); |
| 71 |
|
| 72 |
/* copy the data */ |
| 73 |
TIME(dev, "insb", count, |
| 74 |
arcnet_insb(ioaddr, COM20020_REG_RW_MEMDATA, buf, count)); |
| 75 |
} |
| 76 |
|
| 77 |
static void com20020_copy_to_card(struct net_device *dev, int bufnum, |
| 78 |
int offset, void *buf, int count) |
| 79 |
{ |
| 80 |
int ioaddr = dev->base_addr, ofs = 512 * bufnum + offset; |
| 81 |
|
| 82 |
/* set up the address register */ |
| 83 |
arcnet_outb((ofs >> 8) | AUTOINCflag, ioaddr, COM20020_REG_W_ADDR_HI); |
| 84 |
arcnet_outb(ofs & 0xff, ioaddr, COM20020_REG_W_ADDR_LO); |
| 85 |
|
| 86 |
/* copy the data */ |
| 87 |
TIME(dev, "outsb", count, |
| 88 |
arcnet_outsb(ioaddr, COM20020_REG_RW_MEMDATA, buf, count)); |
| 89 |
} |
| 90 |
|
| 91 |
/* Reset the card and check some basic stuff during the detection stage. */ |
| 92 |
int com20020_check(struct net_device *dev) |
| 93 |
{ |
| 94 |
int ioaddr = dev->base_addr, status; |
| 95 |
struct arcnet_local *lp = netdev_priv(dev); |
| 96 |
|
| 97 |
arcnet_outb(XTOcfg(3) | RESETcfg, ioaddr, COM20020_REG_W_CONFIG); |
| 98 |
udelay(5); |
| 99 |
arcnet_outb(XTOcfg(3), ioaddr, COM20020_REG_W_CONFIG); |
| 100 |
mdelay(RESETtime); |
| 101 |
|
| 102 |
lp->setup = lp->clockm ? 0 : (lp->clockp << 1); |
| 103 |
lp->setup2 = (lp->clockm << 4) | 8; |
| 104 |
|
| 105 |
/* CHECK: should we do this for SOHARD cards ? */ |
| 106 |
/* Enable P1Mode for backplane mode */ |
| 107 |
lp->setup = lp->setup | P1MODE; |
| 108 |
|
| 109 |
com20020_set_subaddress(lp, ioaddr, SUB_SETUP1); |
| 110 |
arcnet_outb(lp->setup, ioaddr, COM20020_REG_W_XREG); |
| 111 |
|
| 112 |
if (lp->clockm != 0) { |
| 113 |
com20020_set_subaddress(lp, ioaddr, SUB_SETUP2); |
| 114 |
arcnet_outb(lp->setup2, ioaddr, COM20020_REG_W_XREG); |
| 115 |
|
| 116 |
/* must now write the magic "restart operation" command */ |
| 117 |
mdelay(1); |
| 118 |
arcnet_outb(STARTIOcmd, ioaddr, COM20020_REG_W_COMMAND); |
| 119 |
} |
| 120 |
|
| 121 |
lp->config = (lp->timeout << 3) | (lp->backplane << 2) | SUB_NODE; |
| 122 |
/* set node ID to 0x42 (but transmitter is disabled, so it's okay) */ |
| 123 |
arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); |
| 124 |
arcnet_outb(0x42, ioaddr, COM20020_REG_W_XREG); |
| 125 |
|
| 126 |
status = arcnet_inb(ioaddr, COM20020_REG_R_STATUS); |
| 127 |
|
| 128 |
if ((status & 0x99) != (NORXflag | TXFREEflag | RESETflag)) { |
| 129 |
arc_printk(D_NORMAL, dev, "status invalid (%Xh).\n", status); |
| 130 |
return -ENODEV; |
| 131 |
} |
| 132 |
arc_printk(D_INIT_REASONS, dev, "status after reset: %X\n", status); |
| 133 |
|
| 134 |
arcnet_outb(CFLAGScmd | RESETclear | CONFIGclear, |
| 135 |
ioaddr, COM20020_REG_W_COMMAND); |
| 136 |
status = arcnet_inb(ioaddr, COM20020_REG_R_STATUS); |
| 137 |
arc_printk(D_INIT_REASONS, dev, "status after reset acknowledged: %X\n", |
| 138 |
status); |
| 139 |
|
| 140 |
/* Read first location of memory */ |
| 141 |
arcnet_outb(0 | RDDATAflag | AUTOINCflag, |
| 142 |
ioaddr, COM20020_REG_W_ADDR_HI); |
| 143 |
arcnet_outb(0, ioaddr, COM20020_REG_W_ADDR_LO); |
| 144 |
|
| 145 |
status = arcnet_inb(ioaddr, COM20020_REG_RW_MEMDATA); |
| 146 |
if (status != TESTvalue) { |
| 147 |
arc_printk(D_NORMAL, dev, "Signature byte not found (%02Xh != D1h).\n", |
| 148 |
status); |
| 149 |
return -ENODEV; |
| 150 |
} |
| 151 |
return 0; |
| 152 |
} |
| 153 |
|
| 154 |
static int com20020_set_hwaddr(struct net_device *dev, void *addr) |
| 155 |
{ |
| 156 |
int ioaddr = dev->base_addr; |
| 157 |
struct arcnet_local *lp = netdev_priv(dev); |
| 158 |
struct sockaddr *hwaddr = addr; |
| 159 |
|
| 160 |
dev_addr_set(dev, hwaddr->sa_data); |
| 161 |
com20020_set_subaddress(lp, ioaddr, SUB_NODE); |
| 162 |
arcnet_outb(dev->dev_addr[0], ioaddr, COM20020_REG_W_XREG); |
| 163 |
|
| 164 |
return 0; |
| 165 |
} |
| 166 |
|
| 167 |
static int com20020_netdev_open(struct net_device *dev) |
| 168 |
{ |
| 169 |
int ioaddr = dev->base_addr; |
| 170 |
struct arcnet_local *lp = netdev_priv(dev); |
| 171 |
|
| 172 |
lp->config |= TXENcfg; |
| 173 |
arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); |
| 174 |
|
| 175 |
return arcnet_open(dev); |
| 176 |
} |
| 177 |
|
| 178 |
static int com20020_netdev_close(struct net_device *dev) |
| 179 |
{ |
| 180 |
int ioaddr = dev->base_addr; |
| 181 |
struct arcnet_local *lp = netdev_priv(dev); |
| 182 |
|
| 183 |
arcnet_close(dev); |
| 184 |
|
| 185 |
/* disable transmitter */ |
| 186 |
lp->config &= ~TXENcfg; |
| 187 |
arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); |
| 188 |
return 0; |
| 189 |
} |
| 190 |
|
| 191 |
const struct net_device_ops com20020_netdev_ops = { |
| 192 |
.ndo_open = com20020_netdev_open, |
| 193 |
.ndo_stop = com20020_netdev_close, |
| 194 |
.ndo_start_xmit = arcnet_send_packet, |
| 195 |
.ndo_tx_timeout = arcnet_timeout, |
| 196 |
.ndo_set_mac_address = com20020_set_hwaddr, |
| 197 |
.ndo_set_rx_mode = com20020_set_mc_list, |
| 198 |
}; |
| 199 |
|
| 200 |
/* Set up the struct net_device associated with this card. Called after |
| 201 |
* probing succeeds. |
| 202 |
*/ |
| 203 |
int com20020_found(struct net_device *dev, int shared) |
| 204 |
{ |
| 205 |
struct arcnet_local *lp; |
| 206 |
int ioaddr = dev->base_addr; |
| 207 |
|
| 208 |
/* Initialize the rest of the device structure. */ |
| 209 |
|
| 210 |
lp = netdev_priv(dev); |
| 211 |
|
| 212 |
lp->hw.owner = THIS_MODULE; |
| 213 |
lp->hw.command = com20020_command; |
| 214 |
lp->hw.status = com20020_status; |
| 215 |
lp->hw.intmask = com20020_setmask; |
| 216 |
lp->hw.reset = com20020_reset; |
| 217 |
lp->hw.copy_to_card = com20020_copy_to_card; |
| 218 |
lp->hw.copy_from_card = com20020_copy_from_card; |
| 219 |
lp->hw.close = com20020_close; |
| 220 |
|
| 221 |
/* FIXME: do this some other way! */ |
| 222 |
if (!dev->dev_addr[0]) |
| 223 |
arcnet_set_addr(dev, arcnet_inb(ioaddr, 8)); |
| 224 |
|
| 225 |
com20020_set_subaddress(lp, ioaddr, SUB_SETUP1); |
| 226 |
arcnet_outb(lp->setup, ioaddr, COM20020_REG_W_XREG); |
| 227 |
|
| 228 |
if (lp->card_flags & ARC_CAN_10MBIT) { |
| 229 |
com20020_set_subaddress(lp, ioaddr, SUB_SETUP2); |
| 230 |
arcnet_outb(lp->setup2, ioaddr, COM20020_REG_W_XREG); |
| 231 |
|
| 232 |
/* must now write the magic "restart operation" command */ |
| 233 |
mdelay(1); |
| 234 |
arcnet_outb(STARTIOcmd, ioaddr, COM20020_REG_W_COMMAND); |
| 235 |
} |
| 236 |
|
| 237 |
lp->config = (lp->timeout << 3) | (lp->backplane << 2) | SUB_NODE; |
| 238 |
/* Default 0x38 + register: Node ID */ |
| 239 |
arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); |
| 240 |
arcnet_outb(dev->dev_addr[0], ioaddr, COM20020_REG_W_XREG); |
| 241 |
|
| 242 |
/* reserve the irq */ |
| 243 |
if (request_irq(dev->irq, arcnet_interrupt, shared, |
| 244 |
"arcnet (COM20020)", dev)) { |
| 245 |
arc_printk(D_NORMAL, dev, "Can't get IRQ %d!\n", dev->irq); |
| 246 |
return -ENODEV; |
| 247 |
} |
| 248 |
|
| 249 |
arc_printk(D_NORMAL, dev, "%s: station %02Xh found at %03lXh, IRQ %d.\n", |
| 250 |
lp->card_name, dev->dev_addr[0], dev->base_addr, dev->irq); |
| 251 |
|
| 252 |
if (lp->backplane) |
| 253 |
arc_printk(D_NORMAL, dev, "Using backplane mode.\n"); |
| 254 |
|
| 255 |
if (lp->timeout != 3) |
| 256 |
arc_printk(D_NORMAL, dev, "Using extended timeout value of %d\n", |
| 257 |
lp->timeout); |
| 258 |
|
| 259 |
arc_printk(D_NORMAL, dev, "Using CKP %d - data rate %s\n", |
| 260 |
lp->setup >> 1, |
| 261 |
clockrates[3 - |
| 262 |
((lp->setup2 & 0xF0) >> 4) + |
| 263 |
((lp->setup & 0x0F) >> 1)]); |
| 264 |
/* The clockrates array index looks very fragile. |
| 265 |
* It seems like it could have negative indexing. |
| 266 |
*/ |
| 267 |
|
| 268 |
if (register_netdev(dev)) { |
| 269 |
free_irq(dev->irq, dev); |
| 270 |
return -EIO; |
| 271 |
} |
| 272 |
return 0; |
| 273 |
} |
| 274 |
|
| 275 |
/* Do a hardware reset on the card, and set up necessary registers. |
| 276 |
* |
| 277 |
* This should be called as little as possible, because it disrupts the |
| 278 |
* token on the network (causes a RECON) and requires a significant delay. |
| 279 |
* |
| 280 |
* However, it does make sure the card is in a defined state. |
| 281 |
*/ |
| 282 |
static int com20020_reset(struct net_device *dev, int really_reset) |
| 283 |
{ |
| 284 |
struct arcnet_local *lp = netdev_priv(dev); |
| 285 |
u_int ioaddr = dev->base_addr; |
| 286 |
u_char inbyte; |
| 287 |
|
| 288 |
arc_printk(D_DEBUG, dev, "%s: %d: %s: dev: %p, lp: %p, dev->name: %s\n", |
| 289 |
__FILE__, __LINE__, __func__, dev, lp, dev->name); |
| 290 |
arc_printk(D_INIT, dev, "Resetting %s (status=%02Xh)\n", |
| 291 |
dev->name, arcnet_inb(ioaddr, COM20020_REG_R_STATUS)); |
| 292 |
|
| 293 |
arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__); |
| 294 |
lp->config |= (lp->timeout << 3) | (lp->backplane << 2); |
| 295 |
/* power-up defaults */ |
| 296 |
arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); |
| 297 |
arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__); |
| 298 |
|
| 299 |
if (really_reset) { |
| 300 |
/* reset the card */ |
| 301 |
arcnet_outb(lp->config | RESETcfg, ioaddr, COM20020_REG_W_CONFIG); |
| 302 |
udelay(5); |
| 303 |
arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); |
| 304 |
mdelay(RESETtime * 2); |
| 305 |
/* COM20020 seems to be slower sometimes */ |
| 306 |
} |
| 307 |
/* clear flags & end reset */ |
| 308 |
arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__); |
| 309 |
arcnet_outb(CFLAGScmd | RESETclear | CONFIGclear, |
| 310 |
ioaddr, COM20020_REG_W_COMMAND); |
| 311 |
|
| 312 |
/* verify that the ARCnet signature byte is present */ |
| 313 |
arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__); |
| 314 |
|
| 315 |
com20020_copy_from_card(dev, 0, 0, &inbyte, 1); |
| 316 |
arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__); |
| 317 |
if (inbyte != TESTvalue) { |
| 318 |
arc_printk(D_DEBUG, dev, "%s: %d: %s\n", |
| 319 |
__FILE__, __LINE__, __func__); |
| 320 |
arc_printk(D_NORMAL, dev, "reset failed: TESTvalue not present.\n"); |
| 321 |
return 1; |
| 322 |
} |
| 323 |
/* enable extended (512-byte) packets */ |
| 324 |
arcnet_outb(CONFIGcmd | EXTconf, ioaddr, COM20020_REG_W_COMMAND); |
| 325 |
|
| 326 |
arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__); |
| 327 |
|
| 328 |
/* done! return success. */ |
| 329 |
return 0; |
| 330 |
} |
| 331 |
|
| 332 |
static void com20020_setmask(struct net_device *dev, int mask) |
| 333 |
{ |
| 334 |
u_int ioaddr = dev->base_addr; |
| 335 |
|
| 336 |
arc_printk(D_DURING, dev, "Setting mask to %x at %x\n", mask, ioaddr); |
| 337 |
arcnet_outb(mask, ioaddr, COM20020_REG_W_INTMASK); |
| 338 |
} |
| 339 |
|
| 340 |
static void com20020_command(struct net_device *dev, int cmd) |
| 341 |
{ |
| 342 |
u_int ioaddr = dev->base_addr; |
| 343 |
|
| 344 |
arcnet_outb(cmd, ioaddr, COM20020_REG_W_COMMAND); |
| 345 |
} |
| 346 |
|
| 347 |
static int com20020_status(struct net_device *dev) |
| 348 |
{ |
| 349 |
u_int ioaddr = dev->base_addr; |
| 350 |
|
| 351 |
return arcnet_inb(ioaddr, COM20020_REG_R_STATUS) + |
| 352 |
(arcnet_inb(ioaddr, COM20020_REG_R_DIAGSTAT) << 8); |
| 353 |
} |
| 354 |
|
| 355 |
static void com20020_close(struct net_device *dev) |
| 356 |
{ |
| 357 |
struct arcnet_local *lp = netdev_priv(dev); |
| 358 |
int ioaddr = dev->base_addr; |
| 359 |
|
| 360 |
/* disable transmitter */ |
| 361 |
lp->config &= ~TXENcfg; |
| 362 |
arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); |
| 363 |
} |
| 364 |
|
| 365 |
/* Set or clear the multicast filter for this adaptor. |
| 366 |
* num_addrs == -1 Promiscuous mode, receive all packets |
| 367 |
* num_addrs == 0 Normal mode, clear multicast list |
| 368 |
* num_addrs > 0 Multicast mode, receive normal and MC packets, and do |
| 369 |
* best-effort filtering. |
| 370 |
* FIXME - do multicast stuff, not just promiscuous. |
| 371 |
*/ |
| 372 |
static void com20020_set_mc_list(struct net_device *dev) |
| 373 |
{ |
| 374 |
struct arcnet_local *lp = netdev_priv(dev); |
| 375 |
int ioaddr = dev->base_addr; |
| 376 |
|
| 377 |
if ((dev->flags & IFF_PROMISC) && (dev->flags & IFF_UP)) { |
| 378 |
/* Enable promiscuous mode */ |
| 379 |
if (!(lp->setup & PROMISCset)) |
| 380 |
arc_printk(D_NORMAL, dev, "Setting promiscuous flag...\n"); |
| 381 |
com20020_set_subaddress(lp, ioaddr, SUB_SETUP1); |
| 382 |
lp->setup |= PROMISCset; |
| 383 |
arcnet_outb(lp->setup, ioaddr, COM20020_REG_W_XREG); |
| 384 |
} else { |
| 385 |
/* Disable promiscuous mode, use normal mode */ |
| 386 |
if ((lp->setup & PROMISCset)) |
| 387 |
arc_printk(D_NORMAL, dev, "Resetting promiscuous flag...\n"); |
| 388 |
com20020_set_subaddress(lp, ioaddr, SUB_SETUP1); |
| 389 |
lp->setup &= ~PROMISCset; |
| 390 |
arcnet_outb(lp->setup, ioaddr, COM20020_REG_W_XREG); |
| 391 |
} |
| 392 |
} |
| 393 |
|
| 394 |
#if defined(CONFIG_ARCNET_COM20020_PCI_MODULE) || \ |
| 395 |
defined(CONFIG_ARCNET_COM20020_ISA_MODULE) || \ |
| 396 |
defined(CONFIG_ARCNET_COM20020_CS_MODULE) |
| 397 |
EXPORT_SYMBOL(com20020_check); |
| 398 |
EXPORT_SYMBOL(com20020_found); |
| 399 |
EXPORT_SYMBOL(com20020_netdev_ops); |
| 400 |
#endif |
| 401 |
|
| 402 |
MODULE_DESCRIPTION("ARCnet COM20020 chipset core driver"); |
| 403 |
MODULE_LICENSE("GPL"); |