| 1 |
/* |
| 2 |
* Linux ARCnet driver - COM20020 PCMCIA support |
| 3 |
* |
| 4 |
* Written 1994-1999 by Avery Pennarun, |
| 5 |
* based on an ISA version by David Woodhouse. |
| 6 |
* Derived from ibmtr_cs.c by Steve Kipisz (pcmcia-cs 3.1.4) |
| 7 |
* which was derived from pcnet_cs.c by David Hinds. |
| 8 |
* Some additional portions derived from skeleton.c by Donald Becker. |
| 9 |
* |
| 10 |
* Special thanks to Contemporary Controls, Inc. (www.ccontrols.com) |
| 11 |
* for sponsoring the further development of this driver. |
| 12 |
* |
| 13 |
* ********************** |
| 14 |
* |
| 15 |
* The original copyright of skeleton.c was as follows: |
| 16 |
* |
| 17 |
* skeleton.c Written 1993 by Donald Becker. |
| 18 |
* Copyright 1993 United States Government as represented by the |
| 19 |
* Director, National Security Agency. This software may only be used |
| 20 |
* and distributed according to the terms of the GNU General Public License as |
| 21 |
* modified by SRC, incorporated herein by reference. |
| 22 |
* |
| 23 |
* ********************** |
| 24 |
* Changes: |
| 25 |
* Arnaldo Carvalho de Melo <[email protected]> - 08/08/2000 |
| 26 |
* - reorganize kmallocs in com20020_attach, checking all for failure |
| 27 |
* and releasing the previous allocations if one fails |
| 28 |
* ********************** |
| 29 |
* |
| 30 |
* For more details, see drivers/net/arcnet.c |
| 31 |
* |
| 32 |
* ********************** |
| 33 |
*/ |
| 34 |
|
| 35 |
#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt |
| 36 |
|
| 37 |
#include <linux/kernel.h> |
| 38 |
#include <linux/ptrace.h> |
| 39 |
#include <linux/slab.h> |
| 40 |
#include <linux/string.h> |
| 41 |
#include <linux/timer.h> |
| 42 |
#include <linux/delay.h> |
| 43 |
#include <linux/module.h> |
| 44 |
#include <linux/netdevice.h> |
| 45 |
#include <linux/io.h> |
| 46 |
#include <pcmcia/cistpl.h> |
| 47 |
#include <pcmcia/ds.h> |
| 48 |
|
| 49 |
#include "arcdevice.h" |
| 50 |
#include "com20020.h" |
| 51 |
|
| 52 |
static void regdump(struct net_device *dev) |
| 53 |
{ |
| 54 |
#ifdef DEBUG |
| 55 |
int ioaddr = dev->base_addr; |
| 56 |
int count; |
| 57 |
|
| 58 |
netdev_dbg(dev, "register dump:\n"); |
| 59 |
for (count = 0; count < 16; count++) { |
| 60 |
if (!(count % 16)) |
| 61 |
pr_cont("%04X:", ioaddr + count); |
| 62 |
pr_cont(" %02X", arcnet_inb(ioaddr, count)); |
| 63 |
} |
| 64 |
pr_cont("\n"); |
| 65 |
|
| 66 |
netdev_dbg(dev, "buffer0 dump:\n"); |
| 67 |
/* set up the address register */ |
| 68 |
count = 0; |
| 69 |
arcnet_outb((count >> 8) | RDDATAflag | AUTOINCflag, |
| 70 |
ioaddr, COM20020_REG_W_ADDR_HI); |
| 71 |
arcnet_outb(count & 0xff, ioaddr, COM20020_REG_W_ADDR_LO); |
| 72 |
|
| 73 |
for (count = 0; count < 256 + 32; count++) { |
| 74 |
if (!(count % 16)) |
| 75 |
pr_cont("%04X:", count); |
| 76 |
|
| 77 |
/* copy the data */ |
| 78 |
pr_cont(" %02X", arcnet_inb(ioaddr, COM20020_REG_RW_MEMDATA)); |
| 79 |
} |
| 80 |
pr_cont("\n"); |
| 81 |
#endif |
| 82 |
} |
| 83 |
|
| 84 |
/*====================================================================*/ |
| 85 |
|
| 86 |
/* Parameters that can be set with 'insmod' */ |
| 87 |
|
| 88 |
static int node; |
| 89 |
static int timeout = 3; |
| 90 |
static int backplane; |
| 91 |
static int clockp; |
| 92 |
static int clockm; |
| 93 |
|
| 94 |
module_param(node, int, 0); |
| 95 |
module_param(timeout, int, 0); |
| 96 |
module_param(backplane, int, 0); |
| 97 |
module_param(clockp, int, 0); |
| 98 |
module_param(clockm, int, 0); |
| 99 |
|
| 100 |
MODULE_DESCRIPTION("ARCnet COM20020 chipset PCMCIA driver"); |
| 101 |
MODULE_LICENSE("GPL"); |
| 102 |
|
| 103 |
/*====================================================================*/ |
| 104 |
|
| 105 |
static int com20020_config(struct pcmcia_device *link); |
| 106 |
static void com20020_release(struct pcmcia_device *link); |
| 107 |
|
| 108 |
static void com20020_detach(struct pcmcia_device *p_dev); |
| 109 |
|
| 110 |
/*====================================================================*/ |
| 111 |
|
| 112 |
static int com20020_probe(struct pcmcia_device *p_dev) |
| 113 |
{ |
| 114 |
struct com20020_dev *info; |
| 115 |
struct net_device *dev; |
| 116 |
struct arcnet_local *lp; |
| 117 |
int ret = -ENOMEM; |
| 118 |
|
| 119 |
dev_dbg(&p_dev->dev, "com20020_attach()\n"); |
| 120 |
|
| 121 |
/* Create new network device */ |
| 122 |
info = kzalloc_obj(*info); |
| 123 |
if (!info) |
| 124 |
goto fail_alloc_info; |
| 125 |
|
| 126 |
dev = alloc_arcdev(""); |
| 127 |
if (!dev) |
| 128 |
goto fail_alloc_dev; |
| 129 |
|
| 130 |
lp = netdev_priv(dev); |
| 131 |
lp->timeout = timeout; |
| 132 |
lp->backplane = backplane; |
| 133 |
lp->clockp = clockp; |
| 134 |
lp->clockm = clockm & 3; |
| 135 |
lp->hw.owner = THIS_MODULE; |
| 136 |
|
| 137 |
/* fill in our module parameters as defaults */ |
| 138 |
arcnet_set_addr(dev, node); |
| 139 |
|
| 140 |
p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; |
| 141 |
p_dev->resource[0]->end = 16; |
| 142 |
p_dev->config_flags |= CONF_ENABLE_IRQ; |
| 143 |
|
| 144 |
info->dev = dev; |
| 145 |
p_dev->priv = info; |
| 146 |
|
| 147 |
ret = com20020_config(p_dev); |
| 148 |
if (ret) |
| 149 |
goto fail_config; |
| 150 |
|
| 151 |
return 0; |
| 152 |
|
| 153 |
fail_config: |
| 154 |
free_arcdev(dev); |
| 155 |
fail_alloc_dev: |
| 156 |
kfree(info); |
| 157 |
fail_alloc_info: |
| 158 |
return ret; |
| 159 |
} /* com20020_attach */ |
| 160 |
|
| 161 |
static void com20020_detach(struct pcmcia_device *link) |
| 162 |
{ |
| 163 |
struct com20020_dev *info = link->priv; |
| 164 |
struct net_device *dev = info->dev; |
| 165 |
|
| 166 |
dev_dbg(&link->dev, "detach...\n"); |
| 167 |
|
| 168 |
dev_dbg(&link->dev, "com20020_detach\n"); |
| 169 |
|
| 170 |
dev_dbg(&link->dev, "unregister...\n"); |
| 171 |
|
| 172 |
unregister_netdev(dev); |
| 173 |
|
| 174 |
/* this is necessary because we register our IRQ separately |
| 175 |
* from card services. |
| 176 |
*/ |
| 177 |
if (dev->irq) |
| 178 |
free_irq(dev->irq, dev); |
| 179 |
|
| 180 |
com20020_release(link); |
| 181 |
|
| 182 |
/* Unlink device structure, free bits */ |
| 183 |
dev_dbg(&link->dev, "unlinking...\n"); |
| 184 |
if (link->priv) { |
| 185 |
dev = info->dev; |
| 186 |
if (dev) { |
| 187 |
dev_dbg(&link->dev, "kfree...\n"); |
| 188 |
free_arcdev(dev); |
| 189 |
} |
| 190 |
dev_dbg(&link->dev, "kfree2...\n"); |
| 191 |
kfree(info); |
| 192 |
} |
| 193 |
|
| 194 |
} /* com20020_detach */ |
| 195 |
|
| 196 |
static int com20020_config(struct pcmcia_device *link) |
| 197 |
{ |
| 198 |
struct arcnet_local *lp; |
| 199 |
struct com20020_dev *info; |
| 200 |
struct net_device *dev; |
| 201 |
int i, ret; |
| 202 |
int ioaddr; |
| 203 |
|
| 204 |
info = link->priv; |
| 205 |
dev = info->dev; |
| 206 |
|
| 207 |
dev_dbg(&link->dev, "config...\n"); |
| 208 |
|
| 209 |
dev_dbg(&link->dev, "com20020_config\n"); |
| 210 |
|
| 211 |
dev_dbg(&link->dev, "baseport1 is %Xh\n", |
| 212 |
(unsigned int)link->resource[0]->start); |
| 213 |
|
| 214 |
i = -ENODEV; |
| 215 |
link->io_lines = 16; |
| 216 |
|
| 217 |
if (!link->resource[0]->start) { |
| 218 |
for (ioaddr = 0x100; ioaddr < 0x400; ioaddr += 0x10) { |
| 219 |
link->resource[0]->start = ioaddr; |
| 220 |
i = pcmcia_request_io(link); |
| 221 |
if (i == 0) |
| 222 |
break; |
| 223 |
} |
| 224 |
} else { |
| 225 |
i = pcmcia_request_io(link); |
| 226 |
} |
| 227 |
|
| 228 |
if (i != 0) { |
| 229 |
dev_dbg(&link->dev, "requestIO failed totally!\n"); |
| 230 |
goto failed; |
| 231 |
} |
| 232 |
|
| 233 |
ioaddr = dev->base_addr = link->resource[0]->start; |
| 234 |
dev_dbg(&link->dev, "got ioaddr %Xh\n", ioaddr); |
| 235 |
|
| 236 |
dev_dbg(&link->dev, "request IRQ %d\n", |
| 237 |
link->irq); |
| 238 |
if (!link->irq) { |
| 239 |
dev_dbg(&link->dev, "requestIRQ failed totally!\n"); |
| 240 |
goto failed; |
| 241 |
} |
| 242 |
|
| 243 |
dev->irq = link->irq; |
| 244 |
|
| 245 |
ret = pcmcia_enable_device(link); |
| 246 |
if (ret) |
| 247 |
goto failed; |
| 248 |
|
| 249 |
if (com20020_check(dev)) { |
| 250 |
regdump(dev); |
| 251 |
goto failed; |
| 252 |
} |
| 253 |
|
| 254 |
lp = netdev_priv(dev); |
| 255 |
lp->card_name = "PCMCIA COM20020"; |
| 256 |
lp->card_flags = ARC_CAN_10MBIT; /* pretend all of them can 10Mbit */ |
| 257 |
|
| 258 |
SET_NETDEV_DEV(dev, &link->dev); |
| 259 |
|
| 260 |
i = com20020_found(dev, 0); /* calls register_netdev */ |
| 261 |
|
| 262 |
if (i != 0) { |
| 263 |
dev_notice(&link->dev, |
| 264 |
"com20020_found() failed\n"); |
| 265 |
goto failed; |
| 266 |
} |
| 267 |
|
| 268 |
netdev_dbg(dev, "port %#3lx, irq %d\n", |
| 269 |
dev->base_addr, dev->irq); |
| 270 |
return 0; |
| 271 |
|
| 272 |
failed: |
| 273 |
dev_dbg(&link->dev, "com20020_config failed...\n"); |
| 274 |
com20020_release(link); |
| 275 |
return -ENODEV; |
| 276 |
} /* com20020_config */ |
| 277 |
|
| 278 |
static void com20020_release(struct pcmcia_device *link) |
| 279 |
{ |
| 280 |
dev_dbg(&link->dev, "com20020_release\n"); |
| 281 |
pcmcia_disable_device(link); |
| 282 |
} |
| 283 |
|
| 284 |
static int com20020_suspend(struct pcmcia_device *link) |
| 285 |
{ |
| 286 |
struct com20020_dev *info = link->priv; |
| 287 |
struct net_device *dev = info->dev; |
| 288 |
|
| 289 |
if (link->open) |
| 290 |
netif_device_detach(dev); |
| 291 |
|
| 292 |
return 0; |
| 293 |
} |
| 294 |
|
| 295 |
static int com20020_resume(struct pcmcia_device *link) |
| 296 |
{ |
| 297 |
struct com20020_dev *info = link->priv; |
| 298 |
struct net_device *dev = info->dev; |
| 299 |
|
| 300 |
if (link->open) { |
| 301 |
int ioaddr = dev->base_addr; |
| 302 |
struct arcnet_local *lp = netdev_priv(dev); |
| 303 |
|
| 304 |
arcnet_outb(lp->config | 0x80, ioaddr, COM20020_REG_W_CONFIG); |
| 305 |
udelay(5); |
| 306 |
arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); |
| 307 |
} |
| 308 |
|
| 309 |
return 0; |
| 310 |
} |
| 311 |
|
| 312 |
static const struct pcmcia_device_id com20020_ids[] = { |
| 313 |
PCMCIA_DEVICE_PROD_ID12("Contemporary Control Systems, Inc.", |
| 314 |
"PCM20 Arcnet Adapter", 0x59991666, 0x95dfffaf), |
| 315 |
PCMCIA_DEVICE_PROD_ID12("SoHard AG", |
| 316 |
"SH ARC PCMCIA", 0xf8991729, 0x69dff0c7), |
| 317 |
PCMCIA_DEVICE_NULL |
| 318 |
}; |
| 319 |
MODULE_DEVICE_TABLE(pcmcia, com20020_ids); |
| 320 |
|
| 321 |
static struct pcmcia_driver com20020_cs_driver = { |
| 322 |
.owner = THIS_MODULE, |
| 323 |
.name = "com20020_cs", |
| 324 |
.probe = com20020_probe, |
| 325 |
.remove = com20020_detach, |
| 326 |
.id_table = com20020_ids, |
| 327 |
.suspend = com20020_suspend, |
| 328 |
.resume = com20020_resume, |
| 329 |
}; |
| 330 |
module_pcmcia_driver(com20020_cs_driver); |