| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* linux/arch/sh/boards/renesas/sh7763rdp/setup.c |
| 4 |
* |
| 5 |
* Renesas Solutions sh7763rdp board |
| 6 |
* |
| 7 |
* Copyright (C) 2008 Renesas Solutions Corp. |
| 8 |
* Copyright (C) 2008 Nobuhiro Iwamatsu <[email protected]> |
| 9 |
*/ |
| 10 |
#include <linux/init.h> |
| 11 |
#include <linux/platform_device.h> |
| 12 |
#include <linux/interrupt.h> |
| 13 |
#include <linux/input.h> |
| 14 |
#include <linux/mtd/physmap.h> |
| 15 |
#include <linux/fb.h> |
| 16 |
#include <linux/io.h> |
| 17 |
#include <linux/sh_eth.h> |
| 18 |
#include <linux/sh_intc.h> |
| 19 |
#include <mach/sh7763rdp.h> |
| 20 |
#include <asm/sh7760fb.h> |
| 21 |
|
| 22 |
/* NOR Flash */ |
| 23 |
static struct mtd_partition sh7763rdp_nor_flash_partitions[] = { |
| 24 |
{ |
| 25 |
.name = "U-Boot", |
| 26 |
.offset = 0, |
| 27 |
.size = (2 * 128 * 1024), |
| 28 |
.mask_flags = MTD_WRITEABLE, /* Read-only */ |
| 29 |
}, { |
| 30 |
.name = "Linux-Kernel", |
| 31 |
.offset = MTDPART_OFS_APPEND, |
| 32 |
.size = (20 * 128 * 1024), |
| 33 |
}, { |
| 34 |
.name = "Root Filesystem", |
| 35 |
.offset = MTDPART_OFS_APPEND, |
| 36 |
.size = MTDPART_SIZ_FULL, |
| 37 |
}, |
| 38 |
}; |
| 39 |
|
| 40 |
static struct physmap_flash_data sh7763rdp_nor_flash_data = { |
| 41 |
.width = 2, |
| 42 |
.parts = sh7763rdp_nor_flash_partitions, |
| 43 |
.nr_parts = ARRAY_SIZE(sh7763rdp_nor_flash_partitions), |
| 44 |
}; |
| 45 |
|
| 46 |
static struct resource sh7763rdp_nor_flash_resources[] = { |
| 47 |
[0] = { |
| 48 |
.name = "NOR Flash", |
| 49 |
.start = 0, |
| 50 |
.end = (64 * 1024 * 1024), |
| 51 |
.flags = IORESOURCE_MEM, |
| 52 |
}, |
| 53 |
}; |
| 54 |
|
| 55 |
static struct platform_device sh7763rdp_nor_flash_device = { |
| 56 |
.name = "physmap-flash", |
| 57 |
.resource = sh7763rdp_nor_flash_resources, |
| 58 |
.num_resources = ARRAY_SIZE(sh7763rdp_nor_flash_resources), |
| 59 |
.dev = { |
| 60 |
.platform_data = &sh7763rdp_nor_flash_data, |
| 61 |
}, |
| 62 |
}; |
| 63 |
|
| 64 |
/* |
| 65 |
* SH-Ether |
| 66 |
* |
| 67 |
* SH Ether of SH7763 has multi IRQ handling. |
| 68 |
* (0x920,0x940,0x960 -> 0x920) |
| 69 |
*/ |
| 70 |
static struct resource sh_eth_resources[] = { |
| 71 |
{ |
| 72 |
.start = 0xFEE00800, /* use eth1 */ |
| 73 |
.end = 0xFEE00F7C - 1, |
| 74 |
.flags = IORESOURCE_MEM, |
| 75 |
}, { |
| 76 |
.start = 0xFEE01800, /* TSU */ |
| 77 |
.end = 0xFEE01FFF, |
| 78 |
.flags = IORESOURCE_MEM, |
| 79 |
}, { |
| 80 |
.start = evt2irq(0x920), /* irq number */ |
| 81 |
.flags = IORESOURCE_IRQ, |
| 82 |
}, |
| 83 |
}; |
| 84 |
|
| 85 |
static struct sh_eth_plat_data sh7763_eth_pdata = { |
| 86 |
.phy = 1, |
| 87 |
.phy_interface = PHY_INTERFACE_MODE_MII, |
| 88 |
}; |
| 89 |
|
| 90 |
static struct platform_device sh7763rdp_eth_device = { |
| 91 |
.name = "sh7763-gether", |
| 92 |
.resource = sh_eth_resources, |
| 93 |
.num_resources = ARRAY_SIZE(sh_eth_resources), |
| 94 |
.dev = { |
| 95 |
.platform_data = &sh7763_eth_pdata, |
| 96 |
}, |
| 97 |
}; |
| 98 |
|
| 99 |
/* SH7763 LCDC */ |
| 100 |
static struct resource sh7763rdp_fb_resources[] = { |
| 101 |
{ |
| 102 |
.start = 0xFFE80000, |
| 103 |
.end = 0xFFE80442 - 1, |
| 104 |
.flags = IORESOURCE_MEM, |
| 105 |
}, |
| 106 |
}; |
| 107 |
|
| 108 |
static struct fb_videomode sh7763fb_videomode = { |
| 109 |
.refresh = 60, |
| 110 |
.name = "VGA Monitor", |
| 111 |
.xres = 640, |
| 112 |
.yres = 480, |
| 113 |
.pixclock = 10000, |
| 114 |
.left_margin = 80, |
| 115 |
.right_margin = 24, |
| 116 |
.upper_margin = 30, |
| 117 |
.lower_margin = 1, |
| 118 |
.hsync_len = 96, |
| 119 |
.vsync_len = 1, |
| 120 |
.sync = 0, |
| 121 |
.vmode = FB_VMODE_NONINTERLACED, |
| 122 |
.flag = FB_MODE_IS_UNKNOWN, |
| 123 |
}; |
| 124 |
|
| 125 |
static struct sh7760fb_platdata sh7763fb_def_pdata = { |
| 126 |
.def_mode = &sh7763fb_videomode, |
| 127 |
.ldmtr = (LDMTR_TFT_COLOR_16|LDMTR_MCNT), |
| 128 |
.lddfr = LDDFR_16BPP_RGB565, |
| 129 |
.ldpmmr = 0x0000, |
| 130 |
.ldpspr = 0xFFFF, |
| 131 |
.ldaclnr = 0x0001, |
| 132 |
.ldickr = 0x1102, |
| 133 |
.rotate = 0, |
| 134 |
.novsync = 0, |
| 135 |
.blank = NULL, |
| 136 |
}; |
| 137 |
|
| 138 |
static struct platform_device sh7763rdp_fb_device = { |
| 139 |
.name = "sh7760-lcdc", |
| 140 |
.resource = sh7763rdp_fb_resources, |
| 141 |
.num_resources = ARRAY_SIZE(sh7763rdp_fb_resources), |
| 142 |
.dev = { |
| 143 |
.platform_data = &sh7763fb_def_pdata, |
| 144 |
}, |
| 145 |
}; |
| 146 |
|
| 147 |
static struct platform_device *sh7763rdp_devices[] __initdata = { |
| 148 |
&sh7763rdp_nor_flash_device, |
| 149 |
&sh7763rdp_eth_device, |
| 150 |
&sh7763rdp_fb_device, |
| 151 |
}; |
| 152 |
|
| 153 |
static int __init sh7763rdp_devices_setup(void) |
| 154 |
{ |
| 155 |
return platform_add_devices(sh7763rdp_devices, |
| 156 |
ARRAY_SIZE(sh7763rdp_devices)); |
| 157 |
} |
| 158 |
device_initcall(sh7763rdp_devices_setup); |
| 159 |
|
| 160 |
static void __init sh7763rdp_setup(char **cmdline_p) |
| 161 |
{ |
| 162 |
/* Board version check */ |
| 163 |
if (__raw_readw(CPLD_BOARD_ID_ERV_REG) == 0xECB1) |
| 164 |
printk(KERN_INFO "RTE Standard Configuration\n"); |
| 165 |
else |
| 166 |
printk(KERN_INFO "RTA Standard Configuration\n"); |
| 167 |
|
| 168 |
/* USB pin select bits (clear bit 5-2 to 0) */ |
| 169 |
__raw_writew((__raw_readw(PORT_PSEL2) & 0xFFC3), PORT_PSEL2); |
| 170 |
/* USBH setup port I controls to other (clear bits 4-9 to 0) */ |
| 171 |
__raw_writew(__raw_readw(PORT_PICR) & 0xFC0F, PORT_PICR); |
| 172 |
|
| 173 |
/* Select USB Host controller */ |
| 174 |
__raw_writew(0x00, USB_USBHSC); |
| 175 |
|
| 176 |
/* For LCD */ |
| 177 |
/* set PTJ7-1, bits 15-2 of PJCR to 0 */ |
| 178 |
__raw_writew(__raw_readw(PORT_PJCR) & 0x0003, PORT_PJCR); |
| 179 |
/* set PTI5, bits 11-10 of PICR to 0 */ |
| 180 |
__raw_writew(__raw_readw(PORT_PICR) & 0xF3FF, PORT_PICR); |
| 181 |
__raw_writew(0, PORT_PKCR); |
| 182 |
__raw_writew(0, PORT_PLCR); |
| 183 |
/* set PSEL2 bits 14-8, 5-4, of PSEL2 to 0 */ |
| 184 |
__raw_writew((__raw_readw(PORT_PSEL2) & 0x00C0), PORT_PSEL2); |
| 185 |
/* set PSEL3 bits 14-12, 6-4, 2-0 of PSEL3 to 0 */ |
| 186 |
__raw_writew((__raw_readw(PORT_PSEL3) & 0x0700), PORT_PSEL3); |
| 187 |
|
| 188 |
/* For HAC */ |
| 189 |
/* bit3-0 0100:HAC & SSI1 enable */ |
| 190 |
__raw_writew((__raw_readw(PORT_PSEL1) & 0xFFF0) | 0x0004, PORT_PSEL1); |
| 191 |
/* bit14 1:SSI_HAC_CLK enable */ |
| 192 |
__raw_writew(__raw_readw(PORT_PSEL4) | 0x4000, PORT_PSEL4); |
| 193 |
|
| 194 |
/* SH-Ether */ |
| 195 |
__raw_writew((__raw_readw(PORT_PSEL1) & ~0xff00) | 0x2400, PORT_PSEL1); |
| 196 |
__raw_writew(0x0, PORT_PFCR); |
| 197 |
__raw_writew(0x0, PORT_PFCR); |
| 198 |
__raw_writew(0x0, PORT_PFCR); |
| 199 |
|
| 200 |
/* MMC */ |
| 201 |
/*selects SCIF and MMC other functions */ |
| 202 |
__raw_writew(0x0001, PORT_PSEL0); |
| 203 |
/* MMC clock operates */ |
| 204 |
__raw_writel(__raw_readl(MSTPCR1) & ~0x8, MSTPCR1); |
| 205 |
__raw_writew(__raw_readw(PORT_PACR) & ~0x3000, PORT_PACR); |
| 206 |
__raw_writew(__raw_readw(PORT_PCCR) & ~0xCFC3, PORT_PCCR); |
| 207 |
} |
| 208 |
|
| 209 |
static struct sh_machine_vector mv_sh7763rdp __initmv = { |
| 210 |
.mv_name = "sh7763drp", |
| 211 |
.mv_setup = sh7763rdp_setup, |
| 212 |
.mv_init_irq = init_sh7763rdp_IRQ, |
| 213 |
}; |