| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Renesas Technology Corp. R0P7785LC0011RL Support. |
| 4 |
* |
| 5 |
* Copyright (C) 2008 Yoshihiro Shimoda |
| 6 |
* Copyright (C) 2009 Paul Mundt |
| 7 |
*/ |
| 8 |
#include <linux/init.h> |
| 9 |
#include <linux/platform_device.h> |
| 10 |
#include <linux/sm501.h> |
| 11 |
#include <linux/sm501-regs.h> |
| 12 |
#include <linux/fb.h> |
| 13 |
#include <linux/mtd/physmap.h> |
| 14 |
#include <linux/delay.h> |
| 15 |
#include <linux/interrupt.h> |
| 16 |
#include <linux/i2c.h> |
| 17 |
#include <linux/platform_data/i2c-pca-platform.h> |
| 18 |
#include <linux/i2c-algo-pca.h> |
| 19 |
#include <linux/usb/r8a66597.h> |
| 20 |
#include <linux/sh_intc.h> |
| 21 |
#include <linux/irq.h> |
| 22 |
#include <linux/io.h> |
| 23 |
#include <linux/clk.h> |
| 24 |
#include <linux/errno.h> |
| 25 |
#include <linux/gpio/machine.h> |
| 26 |
#include <mach/sh7785lcr.h> |
| 27 |
#include <cpu/sh7785.h> |
| 28 |
#include <asm/heartbeat.h> |
| 29 |
#include <asm/clock.h> |
| 30 |
#include <asm/bl_bit.h> |
| 31 |
|
| 32 |
/* |
| 33 |
* NOTE: This board has 2 physical memory maps. |
| 34 |
* Please look at include/asm-sh/sh7785lcr.h or hardware manual. |
| 35 |
*/ |
| 36 |
static struct resource heartbeat_resource = { |
| 37 |
.start = PLD_LEDCR, |
| 38 |
.end = PLD_LEDCR, |
| 39 |
.flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT, |
| 40 |
}; |
| 41 |
|
| 42 |
static struct platform_device heartbeat_device = { |
| 43 |
.name = "heartbeat", |
| 44 |
.id = -1, |
| 45 |
.num_resources = 1, |
| 46 |
.resource = &heartbeat_resource, |
| 47 |
}; |
| 48 |
|
| 49 |
static struct mtd_partition nor_flash_partitions[] = { |
| 50 |
{ |
| 51 |
.name = "loader", |
| 52 |
.offset = 0x00000000, |
| 53 |
.size = 512 * 1024, |
| 54 |
}, |
| 55 |
{ |
| 56 |
.name = "bootenv", |
| 57 |
.offset = MTDPART_OFS_APPEND, |
| 58 |
.size = 512 * 1024, |
| 59 |
}, |
| 60 |
{ |
| 61 |
.name = "kernel", |
| 62 |
.offset = MTDPART_OFS_APPEND, |
| 63 |
.size = 4 * 1024 * 1024, |
| 64 |
}, |
| 65 |
{ |
| 66 |
.name = "data", |
| 67 |
.offset = MTDPART_OFS_APPEND, |
| 68 |
.size = MTDPART_SIZ_FULL, |
| 69 |
}, |
| 70 |
}; |
| 71 |
|
| 72 |
static struct physmap_flash_data nor_flash_data = { |
| 73 |
.width = 4, |
| 74 |
.parts = nor_flash_partitions, |
| 75 |
.nr_parts = ARRAY_SIZE(nor_flash_partitions), |
| 76 |
}; |
| 77 |
|
| 78 |
static struct resource nor_flash_resources[] = { |
| 79 |
[0] = { |
| 80 |
.start = NOR_FLASH_ADDR, |
| 81 |
.end = NOR_FLASH_ADDR + NOR_FLASH_SIZE - 1, |
| 82 |
.flags = IORESOURCE_MEM, |
| 83 |
} |
| 84 |
}; |
| 85 |
|
| 86 |
static struct platform_device nor_flash_device = { |
| 87 |
.name = "physmap-flash", |
| 88 |
.dev = { |
| 89 |
.platform_data = &nor_flash_data, |
| 90 |
}, |
| 91 |
.num_resources = ARRAY_SIZE(nor_flash_resources), |
| 92 |
.resource = nor_flash_resources, |
| 93 |
}; |
| 94 |
|
| 95 |
static struct r8a66597_platdata r8a66597_data = { |
| 96 |
.xtal = R8A66597_PLATDATA_XTAL_12MHZ, |
| 97 |
.vif = 1, |
| 98 |
}; |
| 99 |
|
| 100 |
static struct resource r8a66597_usb_host_resources[] = { |
| 101 |
[0] = { |
| 102 |
.start = R8A66597_ADDR, |
| 103 |
.end = R8A66597_ADDR + R8A66597_SIZE - 1, |
| 104 |
.flags = IORESOURCE_MEM, |
| 105 |
}, |
| 106 |
[1] = { |
| 107 |
.start = evt2irq(0x240), |
| 108 |
.end = evt2irq(0x240), |
| 109 |
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, |
| 110 |
}, |
| 111 |
}; |
| 112 |
|
| 113 |
static struct platform_device r8a66597_usb_host_device = { |
| 114 |
.name = "r8a66597_hcd", |
| 115 |
.id = -1, |
| 116 |
.dev = { |
| 117 |
.dma_mask = NULL, |
| 118 |
.coherent_dma_mask = 0xffffffff, |
| 119 |
.platform_data = &r8a66597_data, |
| 120 |
}, |
| 121 |
.num_resources = ARRAY_SIZE(r8a66597_usb_host_resources), |
| 122 |
.resource = r8a66597_usb_host_resources, |
| 123 |
}; |
| 124 |
|
| 125 |
static struct resource sm501_resources[] = { |
| 126 |
[0] = { |
| 127 |
.start = SM107_MEM_ADDR, |
| 128 |
.end = SM107_MEM_ADDR + SM107_MEM_SIZE - 1, |
| 129 |
.flags = IORESOURCE_MEM, |
| 130 |
}, |
| 131 |
[1] = { |
| 132 |
.start = SM107_REG_ADDR, |
| 133 |
.end = SM107_REG_ADDR + SM107_REG_SIZE - 1, |
| 134 |
.flags = IORESOURCE_MEM, |
| 135 |
}, |
| 136 |
[2] = { |
| 137 |
.start = evt2irq(0x340), |
| 138 |
.flags = IORESOURCE_IRQ, |
| 139 |
}, |
| 140 |
}; |
| 141 |
|
| 142 |
static struct fb_videomode sm501_default_mode_crt = { |
| 143 |
.pixclock = 35714, /* 28MHz */ |
| 144 |
.xres = 640, |
| 145 |
.yres = 480, |
| 146 |
.left_margin = 105, |
| 147 |
.right_margin = 16, |
| 148 |
.upper_margin = 33, |
| 149 |
.lower_margin = 10, |
| 150 |
.hsync_len = 39, |
| 151 |
.vsync_len = 2, |
| 152 |
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, |
| 153 |
}; |
| 154 |
|
| 155 |
static struct fb_videomode sm501_default_mode_pnl = { |
| 156 |
.pixclock = 40000, /* 25MHz */ |
| 157 |
.xres = 640, |
| 158 |
.yres = 480, |
| 159 |
.left_margin = 2, |
| 160 |
.right_margin = 16, |
| 161 |
.upper_margin = 33, |
| 162 |
.lower_margin = 10, |
| 163 |
.hsync_len = 39, |
| 164 |
.vsync_len = 2, |
| 165 |
.sync = 0, |
| 166 |
}; |
| 167 |
|
| 168 |
static struct sm501_platdata_fbsub sm501_pdata_fbsub_pnl = { |
| 169 |
.def_bpp = 16, |
| 170 |
.def_mode = &sm501_default_mode_pnl, |
| 171 |
.flags = SM501FB_FLAG_USE_INIT_MODE | |
| 172 |
SM501FB_FLAG_USE_HWCURSOR | |
| 173 |
SM501FB_FLAG_USE_HWACCEL | |
| 174 |
SM501FB_FLAG_DISABLE_AT_EXIT | |
| 175 |
SM501FB_FLAG_PANEL_NO_VBIASEN, |
| 176 |
}; |
| 177 |
|
| 178 |
static struct sm501_platdata_fbsub sm501_pdata_fbsub_crt = { |
| 179 |
.def_bpp = 16, |
| 180 |
.def_mode = &sm501_default_mode_crt, |
| 181 |
.flags = SM501FB_FLAG_USE_INIT_MODE | |
| 182 |
SM501FB_FLAG_USE_HWCURSOR | |
| 183 |
SM501FB_FLAG_USE_HWACCEL | |
| 184 |
SM501FB_FLAG_DISABLE_AT_EXIT, |
| 185 |
}; |
| 186 |
|
| 187 |
static struct sm501_platdata_fb sm501_fb_pdata = { |
| 188 |
.fb_route = SM501_FB_OWN, |
| 189 |
.fb_crt = &sm501_pdata_fbsub_crt, |
| 190 |
.fb_pnl = &sm501_pdata_fbsub_pnl, |
| 191 |
}; |
| 192 |
|
| 193 |
static struct sm501_initdata sm501_initdata = { |
| 194 |
.gpio_high = { |
| 195 |
.set = 0x00001fe0, |
| 196 |
.mask = 0x0, |
| 197 |
}, |
| 198 |
.devices = 0, |
| 199 |
.mclk = 84 * 1000000, |
| 200 |
.m1xclk = 112 * 1000000, |
| 201 |
}; |
| 202 |
|
| 203 |
static struct sm501_platdata sm501_platform_data = { |
| 204 |
.init = &sm501_initdata, |
| 205 |
.fb = &sm501_fb_pdata, |
| 206 |
}; |
| 207 |
|
| 208 |
static struct platform_device sm501_device = { |
| 209 |
.name = "sm501", |
| 210 |
.id = -1, |
| 211 |
.dev = { |
| 212 |
.platform_data = &sm501_platform_data, |
| 213 |
}, |
| 214 |
.num_resources = ARRAY_SIZE(sm501_resources), |
| 215 |
.resource = sm501_resources, |
| 216 |
}; |
| 217 |
|
| 218 |
static struct resource i2c_proto_resources[] = { |
| 219 |
[0] = { |
| 220 |
.start = PCA9564_PROTO_32BIT_ADDR, |
| 221 |
.end = PCA9564_PROTO_32BIT_ADDR + PCA9564_SIZE - 1, |
| 222 |
.flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT, |
| 223 |
}, |
| 224 |
[1] = { |
| 225 |
.start = evt2irq(0x380), |
| 226 |
.end = evt2irq(0x380), |
| 227 |
.flags = IORESOURCE_IRQ, |
| 228 |
}, |
| 229 |
}; |
| 230 |
|
| 231 |
static struct resource i2c_resources[] = { |
| 232 |
[0] = { |
| 233 |
.start = PCA9564_ADDR, |
| 234 |
.end = PCA9564_ADDR + PCA9564_SIZE - 1, |
| 235 |
.flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT, |
| 236 |
}, |
| 237 |
[1] = { |
| 238 |
.start = evt2irq(0x380), |
| 239 |
.end = evt2irq(0x380), |
| 240 |
.flags = IORESOURCE_IRQ, |
| 241 |
}, |
| 242 |
}; |
| 243 |
|
| 244 |
static struct gpiod_lookup_table i2c_gpio_table = { |
| 245 |
.dev_id = "i2c.0", |
| 246 |
.table = { |
| 247 |
GPIO_LOOKUP("pfc-sh7757", 0, "reset-gpios", GPIO_ACTIVE_LOW), |
| 248 |
{ }, |
| 249 |
}, |
| 250 |
}; |
| 251 |
|
| 252 |
static struct i2c_pca9564_pf_platform_data i2c_platform_data = { |
| 253 |
.i2c_clock_speed = I2C_PCA_CON_330kHz, |
| 254 |
.timeout = HZ, |
| 255 |
}; |
| 256 |
|
| 257 |
static struct platform_device i2c_device = { |
| 258 |
.name = "i2c-pca-platform", |
| 259 |
.id = -1, |
| 260 |
.dev = { |
| 261 |
.platform_data = &i2c_platform_data, |
| 262 |
}, |
| 263 |
.num_resources = ARRAY_SIZE(i2c_resources), |
| 264 |
.resource = i2c_resources, |
| 265 |
}; |
| 266 |
|
| 267 |
static struct platform_device *sh7785lcr_devices[] __initdata = { |
| 268 |
&heartbeat_device, |
| 269 |
&nor_flash_device, |
| 270 |
&r8a66597_usb_host_device, |
| 271 |
&sm501_device, |
| 272 |
&i2c_device, |
| 273 |
}; |
| 274 |
|
| 275 |
static struct i2c_board_info __initdata sh7785lcr_i2c_devices[] = { |
| 276 |
{ |
| 277 |
I2C_BOARD_INFO("r2025sd", 0x32), |
| 278 |
}, |
| 279 |
}; |
| 280 |
|
| 281 |
static int __init sh7785lcr_devices_setup(void) |
| 282 |
{ |
| 283 |
i2c_register_board_info(0, sh7785lcr_i2c_devices, |
| 284 |
ARRAY_SIZE(sh7785lcr_i2c_devices)); |
| 285 |
|
| 286 |
if (mach_is_sh7785lcr_pt()) { |
| 287 |
i2c_device.resource = i2c_proto_resources; |
| 288 |
i2c_device.num_resources = ARRAY_SIZE(i2c_proto_resources); |
| 289 |
} |
| 290 |
|
| 291 |
gpiod_add_lookup_table(&i2c_gpio_table); |
| 292 |
return platform_add_devices(sh7785lcr_devices, |
| 293 |
ARRAY_SIZE(sh7785lcr_devices)); |
| 294 |
} |
| 295 |
device_initcall(sh7785lcr_devices_setup); |
| 296 |
|
| 297 |
/* Initialize IRQ setting */ |
| 298 |
static void __init init_sh7785lcr_IRQ(void) |
| 299 |
{ |
| 300 |
plat_irq_setup_pins(IRQ_MODE_IRQ7654); |
| 301 |
plat_irq_setup_pins(IRQ_MODE_IRQ3210); |
| 302 |
} |
| 303 |
|
| 304 |
static int sh7785lcr_clk_init(void) |
| 305 |
{ |
| 306 |
struct clk *clk; |
| 307 |
int ret; |
| 308 |
|
| 309 |
clk = clk_get(NULL, "extal"); |
| 310 |
if (IS_ERR(clk)) |
| 311 |
return PTR_ERR(clk); |
| 312 |
ret = clk_set_rate(clk, 33333333); |
| 313 |
clk_put(clk); |
| 314 |
|
| 315 |
return ret; |
| 316 |
} |
| 317 |
|
| 318 |
static void sh7785lcr_power_off(void) |
| 319 |
{ |
| 320 |
unsigned char *p; |
| 321 |
|
| 322 |
p = ioremap(PLD_POFCR, PLD_POFCR + 1); |
| 323 |
if (!p) { |
| 324 |
printk(KERN_ERR "%s: ioremap error.\n", __func__); |
| 325 |
return; |
| 326 |
} |
| 327 |
*p = 0x01; |
| 328 |
iounmap(p); |
| 329 |
set_bl_bit(); |
| 330 |
while (1) |
| 331 |
cpu_relax(); |
| 332 |
} |
| 333 |
|
| 334 |
/* Initialize the board */ |
| 335 |
static void __init sh7785lcr_setup(char **cmdline_p) |
| 336 |
{ |
| 337 |
void __iomem *sm501_reg; |
| 338 |
|
| 339 |
printk(KERN_INFO "Renesas Technology Corp. R0P7785LC0011RL support.\n"); |
| 340 |
|
| 341 |
pm_power_off = sh7785lcr_power_off; |
| 342 |
|
| 343 |
/* sm501 DRAM configuration */ |
| 344 |
sm501_reg = ioremap(SM107_REG_ADDR, SM501_DRAM_CONTROL); |
| 345 |
if (!sm501_reg) { |
| 346 |
printk(KERN_ERR "%s: ioremap error.\n", __func__); |
| 347 |
return; |
| 348 |
} |
| 349 |
|
| 350 |
writel(0x000307c2, sm501_reg + SM501_DRAM_CONTROL); |
| 351 |
iounmap(sm501_reg); |
| 352 |
} |
| 353 |
|
| 354 |
/* Return the board specific boot mode pin configuration */ |
| 355 |
static int sh7785lcr_mode_pins(void) |
| 356 |
{ |
| 357 |
int value = 0; |
| 358 |
|
| 359 |
/* These are the factory default settings of S1 and S2. |
| 360 |
* If you change these dip switches then you will need to |
| 361 |
* adjust the values below as well. |
| 362 |
*/ |
| 363 |
value |= MODE_PIN4; /* Clock Mode 16 */ |
| 364 |
value |= MODE_PIN5; /* 32-bit Area0 bus width */ |
| 365 |
value |= MODE_PIN6; /* 32-bit Area0 bus width */ |
| 366 |
value |= MODE_PIN7; /* Area 0 SRAM interface [fixed] */ |
| 367 |
value |= MODE_PIN8; /* Little Endian */ |
| 368 |
value |= MODE_PIN9; /* Master Mode */ |
| 369 |
value |= MODE_PIN14; /* No PLL step-up */ |
| 370 |
|
| 371 |
return value; |
| 372 |
} |
| 373 |
|
| 374 |
/* |
| 375 |
* The Machine Vector |
| 376 |
*/ |
| 377 |
static struct sh_machine_vector mv_sh7785lcr __initmv = { |
| 378 |
.mv_name = "SH7785LCR", |
| 379 |
.mv_setup = sh7785lcr_setup, |
| 380 |
.mv_clk_init = sh7785lcr_clk_init, |
| 381 |
.mv_init_irq = init_sh7785lcr_IRQ, |
| 382 |
.mv_mode_pins = sh7785lcr_mode_pins, |
| 383 |
}; |
| 384 |
|