| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Renesas Technology Europe RSK+ 7203 Support. |
| 4 |
* |
| 5 |
* Copyright (C) 2008 - 2010 Paul Mundt |
| 6 |
*/ |
| 7 |
#include <linux/init.h> |
| 8 |
#include <linux/types.h> |
| 9 |
#include <linux/platform_device.h> |
| 10 |
#include <linux/interrupt.h> |
| 11 |
#include <linux/smsc911x.h> |
| 12 |
#include <linux/input.h> |
| 13 |
#include <linux/gpio.h> |
| 14 |
#include <linux/gpio_keys.h> |
| 15 |
#include <linux/leds.h> |
| 16 |
#include <asm/machvec.h> |
| 17 |
#include <asm/io.h> |
| 18 |
#include <cpu/sh7203.h> |
| 19 |
|
| 20 |
static struct smsc911x_platform_config smsc911x_config = { |
| 21 |
.phy_interface = PHY_INTERFACE_MODE_MII, |
| 22 |
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, |
| 23 |
.irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, |
| 24 |
.flags = SMSC911X_USE_32BIT | SMSC911X_SWAP_FIFO, |
| 25 |
}; |
| 26 |
|
| 27 |
static struct resource smsc911x_resources[] = { |
| 28 |
[0] = { |
| 29 |
.start = 0x24000000, |
| 30 |
.end = 0x240000ff, |
| 31 |
.flags = IORESOURCE_MEM, |
| 32 |
}, |
| 33 |
[1] = { |
| 34 |
.start = 64, |
| 35 |
.end = 64, |
| 36 |
.flags = IORESOURCE_IRQ, |
| 37 |
}, |
| 38 |
}; |
| 39 |
|
| 40 |
static struct platform_device smsc911x_device = { |
| 41 |
.name = "smsc911x", |
| 42 |
.id = -1, |
| 43 |
.num_resources = ARRAY_SIZE(smsc911x_resources), |
| 44 |
.resource = smsc911x_resources, |
| 45 |
.dev = { |
| 46 |
.platform_data = &smsc911x_config, |
| 47 |
}, |
| 48 |
}; |
| 49 |
|
| 50 |
static struct gpio_led rsk7203_gpio_leds[] = { |
| 51 |
{ |
| 52 |
.name = "green", |
| 53 |
.gpio = GPIO_PE10, |
| 54 |
.active_low = 1, |
| 55 |
}, { |
| 56 |
.name = "orange", |
| 57 |
.default_trigger = "nand-disk", |
| 58 |
.gpio = GPIO_PE12, |
| 59 |
.active_low = 1, |
| 60 |
}, { |
| 61 |
.name = "red:timer", |
| 62 |
.default_trigger = "timer", |
| 63 |
.gpio = GPIO_PC14, |
| 64 |
.active_low = 1, |
| 65 |
}, { |
| 66 |
.name = "red:heartbeat", |
| 67 |
.default_trigger = "heartbeat", |
| 68 |
.gpio = GPIO_PE11, |
| 69 |
.active_low = 1, |
| 70 |
}, |
| 71 |
}; |
| 72 |
|
| 73 |
static struct gpio_led_platform_data rsk7203_gpio_leds_info = { |
| 74 |
.leds = rsk7203_gpio_leds, |
| 75 |
.num_leds = ARRAY_SIZE(rsk7203_gpio_leds), |
| 76 |
}; |
| 77 |
|
| 78 |
static struct platform_device led_device = { |
| 79 |
.name = "leds-gpio", |
| 80 |
.id = -1, |
| 81 |
.dev = { |
| 82 |
.platform_data = &rsk7203_gpio_leds_info, |
| 83 |
}, |
| 84 |
}; |
| 85 |
|
| 86 |
static struct gpio_keys_button rsk7203_gpio_keys_table[] = { |
| 87 |
{ |
| 88 |
.code = BTN_0, |
| 89 |
.gpio = GPIO_PB0, |
| 90 |
.active_low = 1, |
| 91 |
.desc = "SW1", |
| 92 |
}, { |
| 93 |
.code = BTN_1, |
| 94 |
.gpio = GPIO_PB1, |
| 95 |
.active_low = 1, |
| 96 |
.desc = "SW2", |
| 97 |
}, { |
| 98 |
.code = BTN_2, |
| 99 |
.gpio = GPIO_PB2, |
| 100 |
.active_low = 1, |
| 101 |
.desc = "SW3", |
| 102 |
}, |
| 103 |
}; |
| 104 |
|
| 105 |
static struct gpio_keys_platform_data rsk7203_gpio_keys_info = { |
| 106 |
.buttons = rsk7203_gpio_keys_table, |
| 107 |
.nbuttons = ARRAY_SIZE(rsk7203_gpio_keys_table), |
| 108 |
.poll_interval = 50, /* default to 50ms */ |
| 109 |
}; |
| 110 |
|
| 111 |
static struct platform_device keys_device = { |
| 112 |
.name = "gpio-keys-polled", |
| 113 |
.dev = { |
| 114 |
.platform_data = &rsk7203_gpio_keys_info, |
| 115 |
}, |
| 116 |
}; |
| 117 |
|
| 118 |
static struct platform_device *rsk7203_devices[] __initdata = { |
| 119 |
&smsc911x_device, |
| 120 |
&led_device, |
| 121 |
&keys_device, |
| 122 |
}; |
| 123 |
|
| 124 |
static int __init rsk7203_devices_setup(void) |
| 125 |
{ |
| 126 |
/* Select pins for SCIF0 */ |
| 127 |
gpio_request(GPIO_FN_TXD0, NULL); |
| 128 |
gpio_request(GPIO_FN_RXD0, NULL); |
| 129 |
|
| 130 |
/* Setup LAN9118: CS1 in 16-bit Big Endian Mode, IRQ0 at Port B */ |
| 131 |
__raw_writel(0x36db0400, 0xfffc0008); /* CS1BCR */ |
| 132 |
gpio_request(GPIO_FN_IRQ0_PB, NULL); |
| 133 |
|
| 134 |
return platform_add_devices(rsk7203_devices, |
| 135 |
ARRAY_SIZE(rsk7203_devices)); |
| 136 |
} |
| 137 |
device_initcall(rsk7203_devices_setup); |