| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Support for SuperH MigoR Quarter VGA LCD Panel |
| 4 |
* |
| 5 |
* Copyright (C) 2008 Magnus Damm |
| 6 |
* |
| 7 |
* Based on lcd_powertip.c from Kenati Technologies Pvt Ltd. |
| 8 |
* Copyright (c) 2007 Ujjwal Pande <[email protected]>, |
| 9 |
*/ |
| 10 |
|
| 11 |
#include <linux/delay.h> |
| 12 |
#include <linux/err.h> |
| 13 |
#include <linux/fb.h> |
| 14 |
#include <linux/init.h> |
| 15 |
#include <linux/kernel.h> |
| 16 |
#include <linux/module.h> |
| 17 |
#include <linux/gpio.h> |
| 18 |
#include <video/sh_mobile_lcdc.h> |
| 19 |
#include <cpu/sh7722.h> |
| 20 |
#include <mach/migor.h> |
| 21 |
|
| 22 |
/* LCD Module is a PH240320T according to board schematics. This module |
| 23 |
* is made up of a 240x320 LCD hooked up to a R61505U (or HX8347-A01?) |
| 24 |
* Driver IC. This IC is connected to the SH7722 built-in LCDC using a |
| 25 |
* SYS-80 interface configured in 16 bit mode. |
| 26 |
* |
| 27 |
* Index 0: "Device Code Read" returns 0x1505. |
| 28 |
*/ |
| 29 |
|
| 30 |
static void reset_lcd_module(void) |
| 31 |
{ |
| 32 |
gpio_set_value(GPIO_PTH2, 0); |
| 33 |
mdelay(2); |
| 34 |
gpio_set_value(GPIO_PTH2, 1); |
| 35 |
mdelay(1); |
| 36 |
} |
| 37 |
|
| 38 |
/* DB0-DB7 are connected to D1-D8, and DB8-DB15 to D10-D17 */ |
| 39 |
|
| 40 |
static unsigned long adjust_reg18(unsigned short data) |
| 41 |
{ |
| 42 |
unsigned long tmp1, tmp2; |
| 43 |
|
| 44 |
tmp1 = (data<<1 | 0x00000001) & 0x000001FF; |
| 45 |
tmp2 = (data<<2 | 0x00000200) & 0x0003FE00; |
| 46 |
return tmp1 | tmp2; |
| 47 |
} |
| 48 |
|
| 49 |
static void write_reg(void *sys_ops_handle, |
| 50 |
struct sh_mobile_lcdc_sys_bus_ops *sys_ops, |
| 51 |
unsigned short reg, unsigned short data) |
| 52 |
{ |
| 53 |
sys_ops->write_index(sys_ops_handle, adjust_reg18(reg << 8 | data)); |
| 54 |
} |
| 55 |
|
| 56 |
static void write_reg16(void *sys_ops_handle, |
| 57 |
struct sh_mobile_lcdc_sys_bus_ops *sys_ops, |
| 58 |
unsigned short reg, unsigned short data) |
| 59 |
{ |
| 60 |
sys_ops->write_index(sys_ops_handle, adjust_reg18(reg)); |
| 61 |
sys_ops->write_data(sys_ops_handle, adjust_reg18(data)); |
| 62 |
} |
| 63 |
|
| 64 |
static unsigned long read_reg16(void *sys_ops_handle, |
| 65 |
struct sh_mobile_lcdc_sys_bus_ops *sys_ops, |
| 66 |
unsigned short reg) |
| 67 |
{ |
| 68 |
unsigned long data; |
| 69 |
|
| 70 |
sys_ops->write_index(sys_ops_handle, adjust_reg18(reg)); |
| 71 |
data = sys_ops->read_data(sys_ops_handle); |
| 72 |
return ((data >> 1) & 0xff) | ((data >> 2) & 0xff00); |
| 73 |
} |
| 74 |
|
| 75 |
static void migor_lcd_qvga_seq(void *sys_ops_handle, |
| 76 |
struct sh_mobile_lcdc_sys_bus_ops *sys_ops, |
| 77 |
unsigned short const *data, int no_data) |
| 78 |
{ |
| 79 |
int i; |
| 80 |
|
| 81 |
for (i = 0; i < no_data; i += 2) |
| 82 |
write_reg16(sys_ops_handle, sys_ops, data[i], data[i + 1]); |
| 83 |
} |
| 84 |
|
| 85 |
static const unsigned short sync_data[] = { |
| 86 |
0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, |
| 87 |
}; |
| 88 |
|
| 89 |
static const unsigned short magic0_data[] = { |
| 90 |
0x0060, 0x2700, 0x0008, 0x0808, 0x0090, 0x001A, 0x0007, 0x0001, |
| 91 |
0x0017, 0x0001, 0x0019, 0x0000, 0x0010, 0x17B0, 0x0011, 0x0116, |
| 92 |
0x0012, 0x0198, 0x0013, 0x1400, 0x0029, 0x000C, 0x0012, 0x01B8, |
| 93 |
}; |
| 94 |
|
| 95 |
static const unsigned short magic1_data[] = { |
| 96 |
0x0030, 0x0307, 0x0031, 0x0303, 0x0032, 0x0603, 0x0033, 0x0202, |
| 97 |
0x0034, 0x0202, 0x0035, 0x0202, 0x0036, 0x1F1F, 0x0037, 0x0303, |
| 98 |
0x0038, 0x0303, 0x0039, 0x0603, 0x003A, 0x0202, 0x003B, 0x0102, |
| 99 |
0x003C, 0x0204, 0x003D, 0x0000, 0x0001, 0x0100, 0x0002, 0x0300, |
| 100 |
0x0003, 0x5028, 0x0020, 0x00ef, 0x0021, 0x0000, 0x0004, 0x0000, |
| 101 |
0x0009, 0x0000, 0x000A, 0x0008, 0x000C, 0x0000, 0x000D, 0x0000, |
| 102 |
0x0015, 0x8000, |
| 103 |
}; |
| 104 |
|
| 105 |
static const unsigned short magic2_data[] = { |
| 106 |
0x0061, 0x0001, 0x0092, 0x0100, 0x0093, 0x0001, 0x0007, 0x0021, |
| 107 |
}; |
| 108 |
|
| 109 |
static const unsigned short magic3_data[] = { |
| 110 |
0x0010, 0x16B0, 0x0011, 0x0111, 0x0007, 0x0061, |
| 111 |
}; |
| 112 |
|
| 113 |
int migor_lcd_qvga_setup(void *sohandle, struct sh_mobile_lcdc_sys_bus_ops *so) |
| 114 |
{ |
| 115 |
unsigned long xres = 320; |
| 116 |
unsigned long yres = 240; |
| 117 |
int k; |
| 118 |
|
| 119 |
reset_lcd_module(); |
| 120 |
migor_lcd_qvga_seq(sohandle, so, sync_data, ARRAY_SIZE(sync_data)); |
| 121 |
|
| 122 |
if (read_reg16(sohandle, so, 0) != 0x1505) |
| 123 |
return -ENODEV; |
| 124 |
|
| 125 |
pr_info("Migo-R QVGA LCD Module detected.\n"); |
| 126 |
|
| 127 |
migor_lcd_qvga_seq(sohandle, so, sync_data, ARRAY_SIZE(sync_data)); |
| 128 |
write_reg16(sohandle, so, 0x00A4, 0x0001); |
| 129 |
mdelay(10); |
| 130 |
|
| 131 |
migor_lcd_qvga_seq(sohandle, so, magic0_data, ARRAY_SIZE(magic0_data)); |
| 132 |
mdelay(100); |
| 133 |
|
| 134 |
migor_lcd_qvga_seq(sohandle, so, magic1_data, ARRAY_SIZE(magic1_data)); |
| 135 |
write_reg16(sohandle, so, 0x0050, 0xef - (yres - 1)); |
| 136 |
write_reg16(sohandle, so, 0x0051, 0x00ef); |
| 137 |
write_reg16(sohandle, so, 0x0052, 0x0000); |
| 138 |
write_reg16(sohandle, so, 0x0053, xres - 1); |
| 139 |
|
| 140 |
migor_lcd_qvga_seq(sohandle, so, magic2_data, ARRAY_SIZE(magic2_data)); |
| 141 |
mdelay(10); |
| 142 |
|
| 143 |
migor_lcd_qvga_seq(sohandle, so, magic3_data, ARRAY_SIZE(magic3_data)); |
| 144 |
mdelay(40); |
| 145 |
|
| 146 |
/* clear GRAM to avoid displaying garbage */ |
| 147 |
|
| 148 |
write_reg16(sohandle, so, 0x0020, 0x0000); /* horiz addr */ |
| 149 |
write_reg16(sohandle, so, 0x0021, 0x0000); /* vert addr */ |
| 150 |
|
| 151 |
for (k = 0; k < (xres * 256); k++) /* yes, 256 words per line */ |
| 152 |
write_reg16(sohandle, so, 0x0022, 0x0000); |
| 153 |
|
| 154 |
write_reg16(sohandle, so, 0x0020, 0x0000); /* reset horiz addr */ |
| 155 |
write_reg16(sohandle, so, 0x0021, 0x0000); /* reset vert addr */ |
| 156 |
write_reg16(sohandle, so, 0x0007, 0x0173); |
| 157 |
mdelay(40); |
| 158 |
|
| 159 |
/* enable display */ |
| 160 |
write_reg(sohandle, so, 0x00, 0x22); |
| 161 |
mdelay(100); |
| 162 |
return 0; |
| 163 |
} |