| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* KFR2R09 board support code |
| 4 |
* |
| 5 |
* Copyright (C) 2009 Magnus Damm |
| 6 |
*/ |
| 7 |
|
| 8 |
#include <asm/clock.h> |
| 9 |
#include <asm/io.h> |
| 10 |
#include <asm/machvec.h> |
| 11 |
#include <asm/suspend.h> |
| 12 |
|
| 13 |
#include <cpu/sh7724.h> |
| 14 |
|
| 15 |
#include <linux/clkdev.h> |
| 16 |
#include <linux/delay.h> |
| 17 |
#include <linux/gpio.h> |
| 18 |
#include <linux/gpio/machine.h> |
| 19 |
#include <linux/i2c.h> |
| 20 |
#include <linux/init.h> |
| 21 |
#include <linux/input.h> |
| 22 |
#include <linux/input/sh_keysc.h> |
| 23 |
#include <linux/interrupt.h> |
| 24 |
#include <linux/memblock.h> |
| 25 |
#include <linux/mmc/host.h> |
| 26 |
#include <linux/mtd/physmap.h> |
| 27 |
#include <linux/platform_data/lv5207lp.h> |
| 28 |
#include <linux/platform_data/tmio.h> |
| 29 |
#include <linux/platform_device.h> |
| 30 |
#include <linux/regulator/fixed.h> |
| 31 |
#include <linux/regulator/machine.h> |
| 32 |
#include <linux/sh_intc.h> |
| 33 |
#include <linux/usb/r8a66597.h> |
| 34 |
#include <linux/videodev2.h> |
| 35 |
#include <linux/dma-map-ops.h> |
| 36 |
|
| 37 |
#include <mach/kfr2r09.h> |
| 38 |
|
| 39 |
#include <media/drv-intf/renesas-ceu.h> |
| 40 |
#include <media/i2c/rj54n1cb0c.h> |
| 41 |
|
| 42 |
#include <video/sh_mobile_lcdc.h> |
| 43 |
|
| 44 |
#define CEU_BUFFER_MEMORY_SIZE (4 << 20) |
| 45 |
static phys_addr_t ceu_dma_membase; |
| 46 |
|
| 47 |
/* set VIO_CKO clock to 25MHz */ |
| 48 |
#define CEU_MCLK_FREQ 25000000 |
| 49 |
#define DRVCRB 0xA405018C |
| 50 |
|
| 51 |
static struct mtd_partition kfr2r09_nor_flash_partitions[] = |
| 52 |
{ |
| 53 |
{ |
| 54 |
.name = "boot", |
| 55 |
.offset = 0, |
| 56 |
.size = (4 * 1024 * 1024), |
| 57 |
.mask_flags = MTD_WRITEABLE, /* Read-only */ |
| 58 |
}, |
| 59 |
{ |
| 60 |
.name = "other", |
| 61 |
.offset = MTDPART_OFS_APPEND, |
| 62 |
.size = MTDPART_SIZ_FULL, |
| 63 |
}, |
| 64 |
}; |
| 65 |
|
| 66 |
static struct physmap_flash_data kfr2r09_nor_flash_data = { |
| 67 |
.width = 2, |
| 68 |
.parts = kfr2r09_nor_flash_partitions, |
| 69 |
.nr_parts = ARRAY_SIZE(kfr2r09_nor_flash_partitions), |
| 70 |
}; |
| 71 |
|
| 72 |
static struct resource kfr2r09_nor_flash_resources[] = { |
| 73 |
[0] = { |
| 74 |
.name = "NOR Flash", |
| 75 |
.start = 0x00000000, |
| 76 |
.end = 0x03ffffff, |
| 77 |
.flags = IORESOURCE_MEM, |
| 78 |
} |
| 79 |
}; |
| 80 |
|
| 81 |
static struct platform_device kfr2r09_nor_flash_device = { |
| 82 |
.name = "physmap-flash", |
| 83 |
.resource = kfr2r09_nor_flash_resources, |
| 84 |
.num_resources = ARRAY_SIZE(kfr2r09_nor_flash_resources), |
| 85 |
.dev = { |
| 86 |
.platform_data = &kfr2r09_nor_flash_data, |
| 87 |
}, |
| 88 |
}; |
| 89 |
|
| 90 |
static struct resource kfr2r09_nand_flash_resources[] = { |
| 91 |
[0] = { |
| 92 |
.name = "NAND Flash", |
| 93 |
.start = 0x10000000, |
| 94 |
.end = 0x1001ffff, |
| 95 |
.flags = IORESOURCE_MEM, |
| 96 |
} |
| 97 |
}; |
| 98 |
|
| 99 |
static struct platform_device kfr2r09_nand_flash_device = { |
| 100 |
.name = "onenand-flash", |
| 101 |
.resource = kfr2r09_nand_flash_resources, |
| 102 |
.num_resources = ARRAY_SIZE(kfr2r09_nand_flash_resources), |
| 103 |
}; |
| 104 |
|
| 105 |
static struct sh_keysc_info kfr2r09_sh_keysc_info = { |
| 106 |
.mode = SH_KEYSC_MODE_1, /* KEYOUT0->4, KEYIN0->4 */ |
| 107 |
.scan_timing = 3, |
| 108 |
.delay = 10, |
| 109 |
.keycodes = { |
| 110 |
KEY_PHONE, KEY_CLEAR, KEY_MAIL, KEY_WWW, KEY_ENTER, |
| 111 |
KEY_1, KEY_2, KEY_3, 0, KEY_UP, |
| 112 |
KEY_4, KEY_5, KEY_6, 0, KEY_LEFT, |
| 113 |
KEY_7, KEY_8, KEY_9, KEY_PROG1, KEY_RIGHT, |
| 114 |
KEY_S, KEY_0, KEY_P, KEY_PROG2, KEY_DOWN, |
| 115 |
0, 0, 0, 0, 0 |
| 116 |
}, |
| 117 |
}; |
| 118 |
|
| 119 |
static struct resource kfr2r09_sh_keysc_resources[] = { |
| 120 |
[0] = { |
| 121 |
.name = "KEYSC", |
| 122 |
.start = 0x044b0000, |
| 123 |
.end = 0x044b000f, |
| 124 |
.flags = IORESOURCE_MEM, |
| 125 |
}, |
| 126 |
[1] = { |
| 127 |
.start = evt2irq(0xbe0), |
| 128 |
.flags = IORESOURCE_IRQ, |
| 129 |
}, |
| 130 |
}; |
| 131 |
|
| 132 |
static struct platform_device kfr2r09_sh_keysc_device = { |
| 133 |
.name = "sh_keysc", |
| 134 |
.id = 0, /* "keysc0" clock */ |
| 135 |
.num_resources = ARRAY_SIZE(kfr2r09_sh_keysc_resources), |
| 136 |
.resource = kfr2r09_sh_keysc_resources, |
| 137 |
.dev = { |
| 138 |
.platform_data = &kfr2r09_sh_keysc_info, |
| 139 |
}, |
| 140 |
}; |
| 141 |
|
| 142 |
static const struct fb_videomode kfr2r09_lcdc_modes[] = { |
| 143 |
{ |
| 144 |
.name = "TX07D34VM0AAA", |
| 145 |
.xres = 240, |
| 146 |
.yres = 400, |
| 147 |
.left_margin = 0, |
| 148 |
.right_margin = 16, |
| 149 |
.hsync_len = 8, |
| 150 |
.upper_margin = 0, |
| 151 |
.lower_margin = 1, |
| 152 |
.vsync_len = 1, |
| 153 |
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, |
| 154 |
}, |
| 155 |
}; |
| 156 |
|
| 157 |
static struct sh_mobile_lcdc_info kfr2r09_sh_lcdc_info = { |
| 158 |
.clock_source = LCDC_CLK_BUS, |
| 159 |
.ch[0] = { |
| 160 |
.chan = LCDC_CHAN_MAINLCD, |
| 161 |
.fourcc = V4L2_PIX_FMT_RGB565, |
| 162 |
.interface_type = SYS18, |
| 163 |
.clock_divider = 6, |
| 164 |
.flags = LCDC_FLAGS_DWPOL, |
| 165 |
.lcd_modes = kfr2r09_lcdc_modes, |
| 166 |
.num_modes = ARRAY_SIZE(kfr2r09_lcdc_modes), |
| 167 |
.panel_cfg = { |
| 168 |
.width = 35, |
| 169 |
.height = 58, |
| 170 |
.setup_sys = kfr2r09_lcd_setup, |
| 171 |
.start_transfer = kfr2r09_lcd_start, |
| 172 |
}, |
| 173 |
.sys_bus_cfg = { |
| 174 |
.ldmt2r = 0x07010904, |
| 175 |
.ldmt3r = 0x14012914, |
| 176 |
/* set 1s delay to encourage fsync() */ |
| 177 |
.deferred_io_msec = 1000, |
| 178 |
}, |
| 179 |
} |
| 180 |
}; |
| 181 |
|
| 182 |
static struct resource kfr2r09_sh_lcdc_resources[] = { |
| 183 |
[0] = { |
| 184 |
.name = "LCDC", |
| 185 |
.start = 0xfe940000, /* P4-only space */ |
| 186 |
.end = 0xfe942fff, |
| 187 |
.flags = IORESOURCE_MEM, |
| 188 |
}, |
| 189 |
[1] = { |
| 190 |
.start = evt2irq(0xf40), |
| 191 |
.flags = IORESOURCE_IRQ, |
| 192 |
}, |
| 193 |
}; |
| 194 |
|
| 195 |
static struct platform_device kfr2r09_sh_lcdc_device = { |
| 196 |
.name = "sh_mobile_lcdc_fb", |
| 197 |
.num_resources = ARRAY_SIZE(kfr2r09_sh_lcdc_resources), |
| 198 |
.resource = kfr2r09_sh_lcdc_resources, |
| 199 |
.dev = { |
| 200 |
.platform_data = &kfr2r09_sh_lcdc_info, |
| 201 |
}, |
| 202 |
}; |
| 203 |
|
| 204 |
static struct lv5207lp_platform_data kfr2r09_backlight_data = { |
| 205 |
.dev = &kfr2r09_sh_lcdc_device.dev, |
| 206 |
.def_value = 13, |
| 207 |
.max_value = 13, |
| 208 |
}; |
| 209 |
|
| 210 |
static struct i2c_board_info kfr2r09_backlight_board_info = { |
| 211 |
I2C_BOARD_INFO("lv5207lp", 0x75), |
| 212 |
.platform_data = &kfr2r09_backlight_data, |
| 213 |
}; |
| 214 |
|
| 215 |
static struct r8a66597_platdata kfr2r09_usb0_gadget_data = { |
| 216 |
.on_chip = 1, |
| 217 |
}; |
| 218 |
|
| 219 |
static struct resource kfr2r09_usb0_gadget_resources[] = { |
| 220 |
[0] = { |
| 221 |
.start = 0x04d80000, |
| 222 |
.end = 0x04d80123, |
| 223 |
.flags = IORESOURCE_MEM, |
| 224 |
}, |
| 225 |
[1] = { |
| 226 |
.start = evt2irq(0xa20), |
| 227 |
.end = evt2irq(0xa20), |
| 228 |
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, |
| 229 |
}, |
| 230 |
}; |
| 231 |
|
| 232 |
static struct platform_device kfr2r09_usb0_gadget_device = { |
| 233 |
.name = "r8a66597_udc", |
| 234 |
.id = 0, |
| 235 |
.dev = { |
| 236 |
.dma_mask = NULL, /* not use dma */ |
| 237 |
.coherent_dma_mask = 0xffffffff, |
| 238 |
.platform_data = &kfr2r09_usb0_gadget_data, |
| 239 |
}, |
| 240 |
.num_resources = ARRAY_SIZE(kfr2r09_usb0_gadget_resources), |
| 241 |
.resource = kfr2r09_usb0_gadget_resources, |
| 242 |
}; |
| 243 |
|
| 244 |
static struct ceu_platform_data ceu_pdata = { |
| 245 |
.num_subdevs = 1, |
| 246 |
.subdevs = { |
| 247 |
{ /* [0] = rj54n1cb0c */ |
| 248 |
.flags = 0, |
| 249 |
.bus_width = 8, |
| 250 |
.bus_shift = 0, |
| 251 |
.i2c_adapter_id = 1, |
| 252 |
.i2c_address = 0x50, |
| 253 |
}, |
| 254 |
}, |
| 255 |
}; |
| 256 |
|
| 257 |
static struct resource kfr2r09_ceu_resources[] = { |
| 258 |
[0] = { |
| 259 |
.name = "CEU", |
| 260 |
.start = 0xfe910000, |
| 261 |
.end = 0xfe91009f, |
| 262 |
.flags = IORESOURCE_MEM, |
| 263 |
}, |
| 264 |
[1] = { |
| 265 |
.start = evt2irq(0x880), |
| 266 |
.end = evt2irq(0x880), |
| 267 |
.flags = IORESOURCE_IRQ, |
| 268 |
}, |
| 269 |
}; |
| 270 |
|
| 271 |
static struct platform_device kfr2r09_ceu_device = { |
| 272 |
.name = "renesas-ceu", |
| 273 |
.id = 0, /* "ceu0" clock */ |
| 274 |
.num_resources = ARRAY_SIZE(kfr2r09_ceu_resources), |
| 275 |
.resource = kfr2r09_ceu_resources, |
| 276 |
.dev = { |
| 277 |
.platform_data = &ceu_pdata, |
| 278 |
}, |
| 279 |
}; |
| 280 |
|
| 281 |
static struct rj54n1_pdata rj54n1_priv = { |
| 282 |
.mclk_freq = CEU_MCLK_FREQ, |
| 283 |
.ioctl_high = false, |
| 284 |
}; |
| 285 |
|
| 286 |
static struct i2c_board_info kfr2r09_i2c_camera = { |
| 287 |
I2C_BOARD_INFO("rj54n1cb0c", 0x50), |
| 288 |
.platform_data = &rj54n1_priv, |
| 289 |
}; |
| 290 |
|
| 291 |
static struct gpiod_lookup_table rj54n1_gpios = { |
| 292 |
.dev_id = "1-0050", |
| 293 |
.table = { |
| 294 |
GPIO_LOOKUP("sh7724_pfc", GPIO_PTB4, "poweron", |
| 295 |
GPIO_ACTIVE_HIGH), |
| 296 |
GPIO_LOOKUP("sh7724_pfc", GPIO_PTB7, "enable", |
| 297 |
GPIO_ACTIVE_HIGH), |
| 298 |
}, |
| 299 |
}; |
| 300 |
|
| 301 |
/* Fixed 3.3V regulator to be used by SDHI0 */ |
| 302 |
static struct regulator_consumer_supply fixed3v3_power_consumers[] = |
| 303 |
{ |
| 304 |
REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), |
| 305 |
REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), |
| 306 |
}; |
| 307 |
|
| 308 |
static struct resource kfr2r09_sh_sdhi0_resources[] = { |
| 309 |
[0] = { |
| 310 |
.name = "SDHI0", |
| 311 |
.start = 0x04ce0000, |
| 312 |
.end = 0x04ce00ff, |
| 313 |
.flags = IORESOURCE_MEM, |
| 314 |
}, |
| 315 |
[1] = { |
| 316 |
.start = evt2irq(0xe80), |
| 317 |
.flags = IORESOURCE_IRQ, |
| 318 |
}, |
| 319 |
}; |
| 320 |
|
| 321 |
static struct tmio_mmc_data sh7724_sdhi0_data = { |
| 322 |
.chan_priv_tx = (void *)SHDMA_SLAVE_SDHI0_TX, |
| 323 |
.chan_priv_rx = (void *)SHDMA_SLAVE_SDHI0_RX, |
| 324 |
.capabilities = MMC_CAP_SDIO_IRQ, |
| 325 |
.capabilities2 = MMC_CAP2_NO_WRITE_PROTECT, |
| 326 |
}; |
| 327 |
|
| 328 |
static struct platform_device kfr2r09_sh_sdhi0_device = { |
| 329 |
.name = "sh_mobile_sdhi", |
| 330 |
.num_resources = ARRAY_SIZE(kfr2r09_sh_sdhi0_resources), |
| 331 |
.resource = kfr2r09_sh_sdhi0_resources, |
| 332 |
.dev = { |
| 333 |
.platform_data = &sh7724_sdhi0_data, |
| 334 |
}, |
| 335 |
}; |
| 336 |
|
| 337 |
static struct platform_device *kfr2r09_devices[] __initdata = { |
| 338 |
&kfr2r09_nor_flash_device, |
| 339 |
&kfr2r09_nand_flash_device, |
| 340 |
&kfr2r09_sh_keysc_device, |
| 341 |
&kfr2r09_sh_lcdc_device, |
| 342 |
&kfr2r09_sh_sdhi0_device, |
| 343 |
}; |
| 344 |
|
| 345 |
#define BSC_CS0BCR 0xfec10004 |
| 346 |
#define BSC_CS0WCR 0xfec10024 |
| 347 |
#define BSC_CS4BCR 0xfec10010 |
| 348 |
#define BSC_CS4WCR 0xfec10030 |
| 349 |
#define PORT_MSELCRB 0xa4050182 |
| 350 |
|
| 351 |
#ifdef CONFIG_I2C |
| 352 |
static int kfr2r09_usb0_gadget_i2c_setup(void) |
| 353 |
{ |
| 354 |
struct i2c_adapter *a; |
| 355 |
struct i2c_msg msg; |
| 356 |
unsigned char buf[2]; |
| 357 |
int ret; |
| 358 |
|
| 359 |
a = i2c_get_adapter(0); |
| 360 |
if (!a) |
| 361 |
return -ENODEV; |
| 362 |
|
| 363 |
/* set bit 1 (the second bit) of chip at 0x09, register 0x13 */ |
| 364 |
buf[0] = 0x13; |
| 365 |
msg.addr = 0x09; |
| 366 |
msg.buf = buf; |
| 367 |
msg.len = 1; |
| 368 |
msg.flags = 0; |
| 369 |
ret = i2c_transfer(a, &msg, 1); |
| 370 |
if (ret != 1) |
| 371 |
return -ENODEV; |
| 372 |
|
| 373 |
buf[0] = 0; |
| 374 |
msg.addr = 0x09; |
| 375 |
msg.buf = buf; |
| 376 |
msg.len = 1; |
| 377 |
msg.flags = I2C_M_RD; |
| 378 |
ret = i2c_transfer(a, &msg, 1); |
| 379 |
if (ret != 1) |
| 380 |
return -ENODEV; |
| 381 |
|
| 382 |
buf[1] = buf[0] | (1 << 1); |
| 383 |
buf[0] = 0x13; |
| 384 |
msg.addr = 0x09; |
| 385 |
msg.buf = buf; |
| 386 |
msg.len = 2; |
| 387 |
msg.flags = 0; |
| 388 |
ret = i2c_transfer(a, &msg, 1); |
| 389 |
if (ret != 1) |
| 390 |
return -ENODEV; |
| 391 |
|
| 392 |
return 0; |
| 393 |
} |
| 394 |
|
| 395 |
static int kfr2r09_serial_i2c_setup(void) |
| 396 |
{ |
| 397 |
struct i2c_adapter *a; |
| 398 |
struct i2c_msg msg; |
| 399 |
unsigned char buf[2]; |
| 400 |
int ret; |
| 401 |
|
| 402 |
a = i2c_get_adapter(0); |
| 403 |
if (!a) |
| 404 |
return -ENODEV; |
| 405 |
|
| 406 |
/* set bit 6 (the 7th bit) of chip at 0x09, register 0x13 */ |
| 407 |
buf[0] = 0x13; |
| 408 |
msg.addr = 0x09; |
| 409 |
msg.buf = buf; |
| 410 |
msg.len = 1; |
| 411 |
msg.flags = 0; |
| 412 |
ret = i2c_transfer(a, &msg, 1); |
| 413 |
if (ret != 1) |
| 414 |
return -ENODEV; |
| 415 |
|
| 416 |
buf[0] = 0; |
| 417 |
msg.addr = 0x09; |
| 418 |
msg.buf = buf; |
| 419 |
msg.len = 1; |
| 420 |
msg.flags = I2C_M_RD; |
| 421 |
ret = i2c_transfer(a, &msg, 1); |
| 422 |
if (ret != 1) |
| 423 |
return -ENODEV; |
| 424 |
|
| 425 |
buf[1] = buf[0] | (1 << 6); |
| 426 |
buf[0] = 0x13; |
| 427 |
msg.addr = 0x09; |
| 428 |
msg.buf = buf; |
| 429 |
msg.len = 2; |
| 430 |
msg.flags = 0; |
| 431 |
ret = i2c_transfer(a, &msg, 1); |
| 432 |
if (ret != 1) |
| 433 |
return -ENODEV; |
| 434 |
|
| 435 |
return 0; |
| 436 |
} |
| 437 |
#else |
| 438 |
static int kfr2r09_usb0_gadget_i2c_setup(void) |
| 439 |
{ |
| 440 |
return -ENODEV; |
| 441 |
} |
| 442 |
|
| 443 |
static int kfr2r09_serial_i2c_setup(void) |
| 444 |
{ |
| 445 |
return -ENODEV; |
| 446 |
} |
| 447 |
#endif |
| 448 |
|
| 449 |
static int kfr2r09_usb0_gadget_setup(void) |
| 450 |
{ |
| 451 |
int plugged_in; |
| 452 |
|
| 453 |
gpio_request(GPIO_PTN4, NULL); /* USB_DET */ |
| 454 |
gpio_direction_input(GPIO_PTN4); |
| 455 |
plugged_in = gpio_get_value(GPIO_PTN4); |
| 456 |
if (!plugged_in) |
| 457 |
return -ENODEV; /* no cable plugged in */ |
| 458 |
|
| 459 |
if (kfr2r09_usb0_gadget_i2c_setup() != 0) |
| 460 |
return -ENODEV; /* unable to configure using i2c */ |
| 461 |
|
| 462 |
__raw_writew((__raw_readw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB); |
| 463 |
gpio_request(GPIO_FN_PDSTATUS, NULL); /* R-standby disables USB clock */ |
| 464 |
gpio_request(GPIO_PTV6, NULL); /* USBCLK_ON */ |
| 465 |
gpio_direction_output(GPIO_PTV6, 1); /* USBCLK_ON = H */ |
| 466 |
msleep(20); /* wait 20ms to let the clock settle */ |
| 467 |
clk_enable(clk_get(NULL, "usb0")); |
| 468 |
__raw_writew(0x0600, 0xa40501d4); |
| 469 |
|
| 470 |
return 0; |
| 471 |
} |
| 472 |
|
| 473 |
extern char kfr2r09_sdram_enter_start; |
| 474 |
extern char kfr2r09_sdram_enter_end; |
| 475 |
extern char kfr2r09_sdram_leave_start; |
| 476 |
extern char kfr2r09_sdram_leave_end; |
| 477 |
|
| 478 |
static int __init kfr2r09_devices_setup(void) |
| 479 |
{ |
| 480 |
struct clk *camera_clk; |
| 481 |
|
| 482 |
/* register board specific self-refresh code */ |
| 483 |
sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF | |
| 484 |
SUSP_SH_RSTANDBY, |
| 485 |
&kfr2r09_sdram_enter_start, |
| 486 |
&kfr2r09_sdram_enter_end, |
| 487 |
&kfr2r09_sdram_leave_start, |
| 488 |
&kfr2r09_sdram_leave_end); |
| 489 |
|
| 490 |
regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers, |
| 491 |
ARRAY_SIZE(fixed3v3_power_consumers), 3300000); |
| 492 |
|
| 493 |
/* enable SCIF1 serial port for YC401 console support */ |
| 494 |
gpio_request(GPIO_FN_SCIF1_RXD, NULL); |
| 495 |
gpio_request(GPIO_FN_SCIF1_TXD, NULL); |
| 496 |
kfr2r09_serial_i2c_setup(); /* ECONTMSK(bit6=L10ONEN) set 1 */ |
| 497 |
gpio_request(GPIO_PTG3, NULL); /* HPON_ON */ |
| 498 |
gpio_direction_output(GPIO_PTG3, 1); /* HPON_ON = H */ |
| 499 |
|
| 500 |
/* setup NOR flash at CS0 */ |
| 501 |
__raw_writel(0x36db0400, BSC_CS0BCR); |
| 502 |
__raw_writel(0x00000500, BSC_CS0WCR); |
| 503 |
|
| 504 |
/* setup NAND flash at CS4 */ |
| 505 |
__raw_writel(0x36db0400, BSC_CS4BCR); |
| 506 |
__raw_writel(0x00000500, BSC_CS4WCR); |
| 507 |
|
| 508 |
/* setup KEYSC pins */ |
| 509 |
gpio_request(GPIO_FN_KEYOUT0, NULL); |
| 510 |
gpio_request(GPIO_FN_KEYOUT1, NULL); |
| 511 |
gpio_request(GPIO_FN_KEYOUT2, NULL); |
| 512 |
gpio_request(GPIO_FN_KEYOUT3, NULL); |
| 513 |
gpio_request(GPIO_FN_KEYOUT4_IN6, NULL); |
| 514 |
gpio_request(GPIO_FN_KEYIN0, NULL); |
| 515 |
gpio_request(GPIO_FN_KEYIN1, NULL); |
| 516 |
gpio_request(GPIO_FN_KEYIN2, NULL); |
| 517 |
gpio_request(GPIO_FN_KEYIN3, NULL); |
| 518 |
gpio_request(GPIO_FN_KEYIN4, NULL); |
| 519 |
gpio_request(GPIO_FN_KEYOUT5_IN5, NULL); |
| 520 |
|
| 521 |
/* setup LCDC pins for SYS panel */ |
| 522 |
gpio_request(GPIO_FN_LCDD17, NULL); |
| 523 |
gpio_request(GPIO_FN_LCDD16, NULL); |
| 524 |
gpio_request(GPIO_FN_LCDD15, NULL); |
| 525 |
gpio_request(GPIO_FN_LCDD14, NULL); |
| 526 |
gpio_request(GPIO_FN_LCDD13, NULL); |
| 527 |
gpio_request(GPIO_FN_LCDD12, NULL); |
| 528 |
gpio_request(GPIO_FN_LCDD11, NULL); |
| 529 |
gpio_request(GPIO_FN_LCDD10, NULL); |
| 530 |
gpio_request(GPIO_FN_LCDD9, NULL); |
| 531 |
gpio_request(GPIO_FN_LCDD8, NULL); |
| 532 |
gpio_request(GPIO_FN_LCDD7, NULL); |
| 533 |
gpio_request(GPIO_FN_LCDD6, NULL); |
| 534 |
gpio_request(GPIO_FN_LCDD5, NULL); |
| 535 |
gpio_request(GPIO_FN_LCDD4, NULL); |
| 536 |
gpio_request(GPIO_FN_LCDD3, NULL); |
| 537 |
gpio_request(GPIO_FN_LCDD2, NULL); |
| 538 |
gpio_request(GPIO_FN_LCDD1, NULL); |
| 539 |
gpio_request(GPIO_FN_LCDD0, NULL); |
| 540 |
gpio_request(GPIO_FN_LCDRS, NULL); /* LCD_RS */ |
| 541 |
gpio_request(GPIO_FN_LCDCS, NULL); /* LCD_CS/ */ |
| 542 |
gpio_request(GPIO_FN_LCDRD, NULL); /* LCD_RD/ */ |
| 543 |
gpio_request(GPIO_FN_LCDWR, NULL); /* LCD_WR/ */ |
| 544 |
gpio_request(GPIO_FN_LCDVSYN, NULL); /* LCD_VSYNC */ |
| 545 |
gpio_request(GPIO_PTE4, NULL); /* LCD_RST/ */ |
| 546 |
gpio_direction_output(GPIO_PTE4, 1); |
| 547 |
gpio_request(GPIO_PTF4, NULL); /* PROTECT/ */ |
| 548 |
gpio_direction_output(GPIO_PTF4, 1); |
| 549 |
gpio_request(GPIO_PTU0, NULL); /* LEDSTDBY/ */ |
| 550 |
gpio_direction_output(GPIO_PTU0, 1); |
| 551 |
|
| 552 |
/* setup USB function */ |
| 553 |
if (kfr2r09_usb0_gadget_setup() == 0) |
| 554 |
platform_device_register(&kfr2r09_usb0_gadget_device); |
| 555 |
|
| 556 |
/* CEU */ |
| 557 |
gpio_request(GPIO_FN_VIO_CKO, NULL); |
| 558 |
gpio_request(GPIO_FN_VIO0_CLK, NULL); |
| 559 |
gpio_request(GPIO_FN_VIO0_VD, NULL); |
| 560 |
gpio_request(GPIO_FN_VIO0_HD, NULL); |
| 561 |
gpio_request(GPIO_FN_VIO0_FLD, NULL); |
| 562 |
gpio_request(GPIO_FN_VIO0_D7, NULL); |
| 563 |
gpio_request(GPIO_FN_VIO0_D6, NULL); |
| 564 |
gpio_request(GPIO_FN_VIO0_D5, NULL); |
| 565 |
gpio_request(GPIO_FN_VIO0_D4, NULL); |
| 566 |
gpio_request(GPIO_FN_VIO0_D3, NULL); |
| 567 |
gpio_request(GPIO_FN_VIO0_D2, NULL); |
| 568 |
gpio_request(GPIO_FN_VIO0_D1, NULL); |
| 569 |
gpio_request(GPIO_FN_VIO0_D0, NULL); |
| 570 |
|
| 571 |
/* SDHI0 connected to yc304 */ |
| 572 |
gpio_request(GPIO_FN_SDHI0CD, NULL); |
| 573 |
gpio_request(GPIO_FN_SDHI0D3, NULL); |
| 574 |
gpio_request(GPIO_FN_SDHI0D2, NULL); |
| 575 |
gpio_request(GPIO_FN_SDHI0D1, NULL); |
| 576 |
gpio_request(GPIO_FN_SDHI0D0, NULL); |
| 577 |
gpio_request(GPIO_FN_SDHI0CMD, NULL); |
| 578 |
gpio_request(GPIO_FN_SDHI0CLK, NULL); |
| 579 |
|
| 580 |
i2c_register_board_info(0, &kfr2r09_backlight_board_info, 1); |
| 581 |
|
| 582 |
/* Set camera clock frequency and register and alias for rj54n1. */ |
| 583 |
camera_clk = clk_get(NULL, "video_clk"); |
| 584 |
if (!IS_ERR(camera_clk)) { |
| 585 |
clk_set_rate(camera_clk, |
| 586 |
clk_round_rate(camera_clk, CEU_MCLK_FREQ)); |
| 587 |
clk_put(camera_clk); |
| 588 |
} |
| 589 |
clk_add_alias(NULL, "1-0050", "video_clk", NULL); |
| 590 |
|
| 591 |
/* set DRVCRB |
| 592 |
* |
| 593 |
* use 1.8 V for VccQ_VIO |
| 594 |
* use 2.85V for VccQ_SR |
| 595 |
*/ |
| 596 |
__raw_writew((__raw_readw(DRVCRB) & ~0x0003) | 0x0001, DRVCRB); |
| 597 |
|
| 598 |
gpiod_add_lookup_table(&rj54n1_gpios); |
| 599 |
|
| 600 |
i2c_register_board_info(1, &kfr2r09_i2c_camera, 1); |
| 601 |
|
| 602 |
/* Initialize CEU platform device separately to map memory first */ |
| 603 |
device_initialize(&kfr2r09_ceu_device.dev); |
| 604 |
dma_declare_coherent_memory(&kfr2r09_ceu_device.dev, |
| 605 |
ceu_dma_membase, ceu_dma_membase, |
| 606 |
CEU_BUFFER_MEMORY_SIZE); |
| 607 |
|
| 608 |
platform_device_add(&kfr2r09_ceu_device); |
| 609 |
|
| 610 |
return platform_add_devices(kfr2r09_devices, |
| 611 |
ARRAY_SIZE(kfr2r09_devices)); |
| 612 |
} |
| 613 |
device_initcall(kfr2r09_devices_setup); |
| 614 |
|
| 615 |
/* Return the board specific boot mode pin configuration */ |
| 616 |
static int kfr2r09_mode_pins(void) |
| 617 |
{ |
| 618 |
/* MD0=1, MD1=1, MD2=0: Clock Mode 3 |
| 619 |
* MD3=0: 16-bit Area0 Bus Width |
| 620 |
* MD5=1: Little Endian |
| 621 |
* MD8=1: Test Mode Disabled |
| 622 |
*/ |
| 623 |
return MODE_PIN0 | MODE_PIN1 | MODE_PIN5 | MODE_PIN8; |
| 624 |
} |
| 625 |
|
| 626 |
/* Reserve a portion of memory for CEU buffers */ |
| 627 |
static void __init kfr2r09_mv_mem_reserve(void) |
| 628 |
{ |
| 629 |
phys_addr_t phys; |
| 630 |
phys_addr_t size = CEU_BUFFER_MEMORY_SIZE; |
| 631 |
|
| 632 |
phys = memblock_phys_alloc(size, PAGE_SIZE); |
| 633 |
if (!phys) |
| 634 |
panic("Failed to allocate CEU memory\n"); |
| 635 |
|
| 636 |
memblock_phys_free(phys, size); |
| 637 |
memblock_remove(phys, size); |
| 638 |
|
| 639 |
ceu_dma_membase = phys; |
| 640 |
} |
| 641 |
|
| 642 |
/* |
| 643 |
* The Machine Vector |
| 644 |
*/ |
| 645 |
static struct sh_machine_vector mv_kfr2r09 __initmv = { |
| 646 |
.mv_name = "kfr2r09", |
| 647 |
.mv_mode_pins = kfr2r09_mode_pins, |
| 648 |
.mv_mem_reserve = kfr2r09_mv_mem_reserve, |
| 649 |
}; |