| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* arch/sh/boards/renesas/r7780rp/setup.c |
| 4 |
* |
| 5 |
* Renesas Solutions Highlander Support. |
| 6 |
* |
| 7 |
* Copyright (C) 2002 Atom Create Engineering Co., Ltd. |
| 8 |
* Copyright (C) 2005 - 2008 Paul Mundt |
| 9 |
* |
| 10 |
* This contains support for the R7780RP-1, R7780MP, and R7785RP |
| 11 |
* Highlander modules. |
| 12 |
*/ |
| 13 |
#include <linux/init.h> |
| 14 |
#include <linux/io.h> |
| 15 |
#include <linux/platform_device.h> |
| 16 |
#include <linux/ata_platform.h> |
| 17 |
#include <linux/types.h> |
| 18 |
#include <linux/mtd/physmap.h> |
| 19 |
#include <linux/i2c.h> |
| 20 |
#include <linux/irq.h> |
| 21 |
#include <linux/interrupt.h> |
| 22 |
#include <linux/usb/r8a66597.h> |
| 23 |
#include <linux/usb/m66592.h> |
| 24 |
#include <linux/clkdev.h> |
| 25 |
#include <net/ax88796.h> |
| 26 |
#include <asm/machvec.h> |
| 27 |
#include <mach/highlander.h> |
| 28 |
#include <asm/clock.h> |
| 29 |
#include <asm/heartbeat.h> |
| 30 |
#include <asm/io.h> |
| 31 |
#include <asm/io_trapped.h> |
| 32 |
|
| 33 |
static struct r8a66597_platdata r8a66597_data = { |
| 34 |
.xtal = R8A66597_PLATDATA_XTAL_12MHZ, |
| 35 |
.vif = 1, |
| 36 |
}; |
| 37 |
|
| 38 |
static struct resource r8a66597_usb_host_resources[] = { |
| 39 |
[0] = { |
| 40 |
.start = 0xA4200000, |
| 41 |
.end = 0xA42000FF, |
| 42 |
.flags = IORESOURCE_MEM, |
| 43 |
}, |
| 44 |
[1] = { |
| 45 |
.start = IRQ_EXT1, /* irq number */ |
| 46 |
.end = IRQ_EXT1, |
| 47 |
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, |
| 48 |
}, |
| 49 |
}; |
| 50 |
|
| 51 |
static struct platform_device r8a66597_usb_host_device = { |
| 52 |
.name = "r8a66597_hcd", |
| 53 |
.id = -1, |
| 54 |
.dev = { |
| 55 |
.dma_mask = NULL, /* don't use dma */ |
| 56 |
.coherent_dma_mask = 0xffffffff, |
| 57 |
.platform_data = &r8a66597_data, |
| 58 |
}, |
| 59 |
.num_resources = ARRAY_SIZE(r8a66597_usb_host_resources), |
| 60 |
.resource = r8a66597_usb_host_resources, |
| 61 |
}; |
| 62 |
|
| 63 |
static struct m66592_platdata usbf_platdata = { |
| 64 |
.xtal = M66592_PLATDATA_XTAL_24MHZ, |
| 65 |
.vif = 1, |
| 66 |
}; |
| 67 |
|
| 68 |
static struct resource m66592_usb_peripheral_resources[] = { |
| 69 |
[0] = { |
| 70 |
.name = "m66592_udc", |
| 71 |
.start = 0xb0000000, |
| 72 |
.end = 0xb00000FF, |
| 73 |
.flags = IORESOURCE_MEM, |
| 74 |
}, |
| 75 |
[1] = { |
| 76 |
.name = "m66592_udc", |
| 77 |
.start = IRQ_EXT4, /* irq number */ |
| 78 |
.end = IRQ_EXT4, |
| 79 |
.flags = IORESOURCE_IRQ, |
| 80 |
}, |
| 81 |
}; |
| 82 |
|
| 83 |
static struct platform_device m66592_usb_peripheral_device = { |
| 84 |
.name = "m66592_udc", |
| 85 |
.id = -1, |
| 86 |
.dev = { |
| 87 |
.dma_mask = NULL, /* don't use dma */ |
| 88 |
.coherent_dma_mask = 0xffffffff, |
| 89 |
.platform_data = &usbf_platdata, |
| 90 |
}, |
| 91 |
.num_resources = ARRAY_SIZE(m66592_usb_peripheral_resources), |
| 92 |
.resource = m66592_usb_peripheral_resources, |
| 93 |
}; |
| 94 |
|
| 95 |
static struct resource cf_ide_resources[] = { |
| 96 |
[0] = { |
| 97 |
.start = PA_AREA5_IO + 0x1000, |
| 98 |
.end = PA_AREA5_IO + 0x1000 + 0x08 - 1, |
| 99 |
.flags = IORESOURCE_MEM, |
| 100 |
}, |
| 101 |
[1] = { |
| 102 |
.start = PA_AREA5_IO + 0x80c, |
| 103 |
.end = PA_AREA5_IO + 0x80c + 0x16 - 1, |
| 104 |
.flags = IORESOURCE_MEM, |
| 105 |
}, |
| 106 |
[2] = { |
| 107 |
.start = IRQ_CF, |
| 108 |
.flags = IORESOURCE_IRQ, |
| 109 |
}, |
| 110 |
}; |
| 111 |
|
| 112 |
static struct pata_platform_info pata_info = { |
| 113 |
.ioport_shift = 1, |
| 114 |
}; |
| 115 |
|
| 116 |
static struct platform_device cf_ide_device = { |
| 117 |
.name = "pata_platform", |
| 118 |
.id = -1, |
| 119 |
.num_resources = ARRAY_SIZE(cf_ide_resources), |
| 120 |
.resource = cf_ide_resources, |
| 121 |
.dev = { |
| 122 |
.platform_data = &pata_info, |
| 123 |
}, |
| 124 |
}; |
| 125 |
|
| 126 |
static struct resource heartbeat_resources[] = { |
| 127 |
[0] = { |
| 128 |
.start = PA_OBLED, |
| 129 |
.end = PA_OBLED, |
| 130 |
.flags = IORESOURCE_MEM, |
| 131 |
}, |
| 132 |
}; |
| 133 |
|
| 134 |
#ifndef CONFIG_SH_R7785RP |
| 135 |
static unsigned char heartbeat_bit_pos[] = { 2, 1, 0, 3, 6, 5, 4, 7 }; |
| 136 |
|
| 137 |
static struct heartbeat_data heartbeat_data = { |
| 138 |
.bit_pos = heartbeat_bit_pos, |
| 139 |
.nr_bits = ARRAY_SIZE(heartbeat_bit_pos), |
| 140 |
}; |
| 141 |
#endif |
| 142 |
|
| 143 |
static struct platform_device heartbeat_device = { |
| 144 |
.name = "heartbeat", |
| 145 |
.id = -1, |
| 146 |
|
| 147 |
/* R7785RP has a slightly more sensible FPGA.. */ |
| 148 |
#ifndef CONFIG_SH_R7785RP |
| 149 |
.dev = { |
| 150 |
.platform_data = &heartbeat_data, |
| 151 |
}, |
| 152 |
#endif |
| 153 |
.num_resources = ARRAY_SIZE(heartbeat_resources), |
| 154 |
.resource = heartbeat_resources, |
| 155 |
}; |
| 156 |
|
| 157 |
static struct ax_plat_data ax88796_platdata = { |
| 158 |
.flags = AXFLG_HAS_93CX6, |
| 159 |
.wordlength = 2, |
| 160 |
.dcr_val = 0x1, |
| 161 |
.rcr_val = 0x40, |
| 162 |
}; |
| 163 |
|
| 164 |
static struct resource ax88796_resources[] = { |
| 165 |
{ |
| 166 |
#ifdef CONFIG_SH_R7780RP |
| 167 |
.start = 0xa5800400, |
| 168 |
.end = 0xa5800400 + (0x20 * 0x2) - 1, |
| 169 |
#else |
| 170 |
.start = 0xa4100400, |
| 171 |
.end = 0xa4100400 + (0x20 * 0x2) - 1, |
| 172 |
#endif |
| 173 |
.flags = IORESOURCE_MEM, |
| 174 |
}, |
| 175 |
{ |
| 176 |
.start = IRQ_AX88796, |
| 177 |
.end = IRQ_AX88796, |
| 178 |
.flags = IORESOURCE_IRQ, |
| 179 |
}, |
| 180 |
}; |
| 181 |
|
| 182 |
static struct platform_device ax88796_device = { |
| 183 |
.name = "ax88796", |
| 184 |
.id = 0, |
| 185 |
|
| 186 |
.dev = { |
| 187 |
.platform_data = &ax88796_platdata, |
| 188 |
}, |
| 189 |
|
| 190 |
.num_resources = ARRAY_SIZE(ax88796_resources), |
| 191 |
.resource = ax88796_resources, |
| 192 |
}; |
| 193 |
|
| 194 |
static struct mtd_partition nor_flash_partitions[] = { |
| 195 |
{ |
| 196 |
.name = "loader", |
| 197 |
.offset = 0x00000000, |
| 198 |
.size = 512 * 1024, |
| 199 |
}, |
| 200 |
{ |
| 201 |
.name = "bootenv", |
| 202 |
.offset = MTDPART_OFS_APPEND, |
| 203 |
.size = 512 * 1024, |
| 204 |
}, |
| 205 |
{ |
| 206 |
.name = "kernel", |
| 207 |
.offset = MTDPART_OFS_APPEND, |
| 208 |
.size = 4 * 1024 * 1024, |
| 209 |
}, |
| 210 |
{ |
| 211 |
.name = "data", |
| 212 |
.offset = MTDPART_OFS_APPEND, |
| 213 |
.size = MTDPART_SIZ_FULL, |
| 214 |
}, |
| 215 |
}; |
| 216 |
|
| 217 |
static struct physmap_flash_data nor_flash_data = { |
| 218 |
.width = 4, |
| 219 |
.parts = nor_flash_partitions, |
| 220 |
.nr_parts = ARRAY_SIZE(nor_flash_partitions), |
| 221 |
}; |
| 222 |
|
| 223 |
/* This config is flash board for mass production. */ |
| 224 |
static struct resource nor_flash_resources[] = { |
| 225 |
[0] = { |
| 226 |
.start = PA_NORFLASH_ADDR, |
| 227 |
.end = PA_NORFLASH_ADDR + PA_NORFLASH_SIZE - 1, |
| 228 |
.flags = IORESOURCE_MEM, |
| 229 |
} |
| 230 |
}; |
| 231 |
|
| 232 |
static struct platform_device nor_flash_device = { |
| 233 |
.name = "physmap-flash", |
| 234 |
.dev = { |
| 235 |
.platform_data = &nor_flash_data, |
| 236 |
}, |
| 237 |
.num_resources = ARRAY_SIZE(nor_flash_resources), |
| 238 |
.resource = nor_flash_resources, |
| 239 |
}; |
| 240 |
|
| 241 |
static struct resource smbus_resources[] = { |
| 242 |
[0] = { |
| 243 |
.start = PA_SMCR, |
| 244 |
.end = PA_SMCR + 0x100 - 1, |
| 245 |
.flags = IORESOURCE_MEM, |
| 246 |
}, |
| 247 |
[1] = { |
| 248 |
.start = IRQ_SMBUS, |
| 249 |
.end = IRQ_SMBUS, |
| 250 |
.flags = IORESOURCE_IRQ, |
| 251 |
}, |
| 252 |
}; |
| 253 |
|
| 254 |
static struct platform_device smbus_device = { |
| 255 |
.name = "i2c-highlander", |
| 256 |
.id = 0, |
| 257 |
.num_resources = ARRAY_SIZE(smbus_resources), |
| 258 |
.resource = smbus_resources, |
| 259 |
}; |
| 260 |
|
| 261 |
static struct i2c_board_info __initdata highlander_i2c_devices[] = { |
| 262 |
{ |
| 263 |
I2C_BOARD_INFO("r2025sd", 0x32), |
| 264 |
}, |
| 265 |
}; |
| 266 |
|
| 267 |
static struct platform_device *r7780rp_devices[] __initdata = { |
| 268 |
&r8a66597_usb_host_device, |
| 269 |
&m66592_usb_peripheral_device, |
| 270 |
&heartbeat_device, |
| 271 |
&smbus_device, |
| 272 |
&nor_flash_device, |
| 273 |
#ifndef CONFIG_SH_R7780RP |
| 274 |
&ax88796_device, |
| 275 |
#endif |
| 276 |
}; |
| 277 |
|
| 278 |
/* |
| 279 |
* The CF is connected using a 16-bit bus where 8-bit operations are |
| 280 |
* unsupported. The linux ata driver is however using 8-bit operations, so |
| 281 |
* insert a trapped io filter to convert 8-bit operations into 16-bit. |
| 282 |
*/ |
| 283 |
static struct trapped_io cf_trapped_io = { |
| 284 |
.resource = cf_ide_resources, |
| 285 |
.num_resources = 2, |
| 286 |
.minimum_bus_width = 16, |
| 287 |
}; |
| 288 |
|
| 289 |
static int __init r7780rp_devices_setup(void) |
| 290 |
{ |
| 291 |
int ret = 0; |
| 292 |
|
| 293 |
#ifndef CONFIG_SH_R7780RP |
| 294 |
if (register_trapped_io(&cf_trapped_io) == 0) |
| 295 |
ret |= platform_device_register(&cf_ide_device); |
| 296 |
#endif |
| 297 |
|
| 298 |
ret |= platform_add_devices(r7780rp_devices, |
| 299 |
ARRAY_SIZE(r7780rp_devices)); |
| 300 |
|
| 301 |
ret |= i2c_register_board_info(0, highlander_i2c_devices, |
| 302 |
ARRAY_SIZE(highlander_i2c_devices)); |
| 303 |
|
| 304 |
return ret; |
| 305 |
} |
| 306 |
device_initcall(r7780rp_devices_setup); |
| 307 |
|
| 308 |
/* |
| 309 |
* Platform specific clocks |
| 310 |
*/ |
| 311 |
static int ivdr_clk_enable(struct clk *clk) |
| 312 |
{ |
| 313 |
__raw_writew(__raw_readw(PA_IVDRCTL) | (1 << IVDR_CK_ON), PA_IVDRCTL); |
| 314 |
return 0; |
| 315 |
} |
| 316 |
|
| 317 |
static void ivdr_clk_disable(struct clk *clk) |
| 318 |
{ |
| 319 |
__raw_writew(__raw_readw(PA_IVDRCTL) & ~(1 << IVDR_CK_ON), PA_IVDRCTL); |
| 320 |
} |
| 321 |
|
| 322 |
static struct sh_clk_ops ivdr_clk_ops = { |
| 323 |
.enable = ivdr_clk_enable, |
| 324 |
.disable = ivdr_clk_disable, |
| 325 |
}; |
| 326 |
|
| 327 |
static struct clk ivdr_clk = { |
| 328 |
.ops = &ivdr_clk_ops, |
| 329 |
}; |
| 330 |
|
| 331 |
static struct clk *r7780rp_clocks[] = { |
| 332 |
&ivdr_clk, |
| 333 |
}; |
| 334 |
|
| 335 |
static struct clk_lookup lookups[] = { |
| 336 |
/* main clocks */ |
| 337 |
CLKDEV_CON_ID("ivdr_clk", &ivdr_clk), |
| 338 |
}; |
| 339 |
|
| 340 |
static void r7780rp_power_off(void) |
| 341 |
{ |
| 342 |
if (mach_is_r7780mp() || mach_is_r7785rp()) |
| 343 |
__raw_writew(0x0001, PA_POFF); |
| 344 |
} |
| 345 |
|
| 346 |
/* |
| 347 |
* Initialize the board |
| 348 |
*/ |
| 349 |
static void __init highlander_setup(char **cmdline_p) |
| 350 |
{ |
| 351 |
u16 ver = __raw_readw(PA_VERREG); |
| 352 |
int i; |
| 353 |
|
| 354 |
printk(KERN_INFO "Renesas Solutions Highlander %s support.\n", |
| 355 |
mach_is_r7780rp() ? "R7780RP-1" : |
| 356 |
mach_is_r7780mp() ? "R7780MP" : |
| 357 |
"R7785RP"); |
| 358 |
|
| 359 |
printk(KERN_INFO "Board version: %d (revision %d), " |
| 360 |
"FPGA version: %d (revision %d)\n", |
| 361 |
(ver >> 12) & 0xf, (ver >> 8) & 0xf, |
| 362 |
(ver >> 4) & 0xf, ver & 0xf); |
| 363 |
|
| 364 |
highlander_plat_pinmux_setup(); |
| 365 |
|
| 366 |
/* |
| 367 |
* Enable the important clocks right away.. |
| 368 |
*/ |
| 369 |
for (i = 0; i < ARRAY_SIZE(r7780rp_clocks); i++) { |
| 370 |
struct clk *clk = r7780rp_clocks[i]; |
| 371 |
|
| 372 |
clk_register(clk); |
| 373 |
clk_enable(clk); |
| 374 |
} |
| 375 |
|
| 376 |
clkdev_add_table(lookups, ARRAY_SIZE(lookups)); |
| 377 |
|
| 378 |
__raw_writew(0x0000, PA_OBLED); /* Clear LED. */ |
| 379 |
|
| 380 |
if (mach_is_r7780rp()) |
| 381 |
__raw_writew(0x0001, PA_SDPOW); /* SD Power ON */ |
| 382 |
|
| 383 |
__raw_writew(__raw_readw(PA_IVDRCTL) | 0x01, PA_IVDRCTL); /* Si13112 */ |
| 384 |
|
| 385 |
pm_power_off = r7780rp_power_off; |
| 386 |
} |
| 387 |
|
| 388 |
static unsigned char irl2irq[HL_NR_IRL]; |
| 389 |
|
| 390 |
static int highlander_irq_demux(int irq) |
| 391 |
{ |
| 392 |
if (irq >= HL_NR_IRL + 16 || irq < 16 || !irl2irq[irq - 16]) |
| 393 |
return irq; |
| 394 |
|
| 395 |
return irl2irq[irq - 16]; |
| 396 |
} |
| 397 |
|
| 398 |
static void __init highlander_init_irq(void) |
| 399 |
{ |
| 400 |
unsigned char *ucp = highlander_plat_irq_setup(); |
| 401 |
|
| 402 |
if (ucp) { |
| 403 |
plat_irq_setup_pins(IRQ_MODE_IRL3210); |
| 404 |
memcpy(irl2irq, ucp, HL_NR_IRL); |
| 405 |
} |
| 406 |
} |
| 407 |
|
| 408 |
/* |
| 409 |
* The Machine Vector |
| 410 |
*/ |
| 411 |
static struct sh_machine_vector mv_highlander __initmv = { |
| 412 |
.mv_name = "Highlander", |
| 413 |
.mv_setup = highlander_setup, |
| 414 |
.mv_init_irq = highlander_init_irq, |
| 415 |
.mv_irq_demux = highlander_irq_demux, |
| 416 |
}; |