| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* arch/sh/boards/dreamcast/irq.c |
| 4 |
* |
| 5 |
* Holly IRQ support for the Sega Dreamcast. |
| 6 |
* |
| 7 |
* Copyright (c) 2001, 2002 M. R. Brown <[email protected]> |
| 8 |
* |
| 9 |
* This file is part of the LinuxDC project (www.linuxdc.org) |
| 10 |
*/ |
| 11 |
#include <linux/irq.h> |
| 12 |
#include <linux/io.h> |
| 13 |
#include <linux/export.h> |
| 14 |
#include <linux/err.h> |
| 15 |
#include <mach/sysasic.h> |
| 16 |
|
| 17 |
/* |
| 18 |
* Dreamcast System ASIC Hardware Events - |
| 19 |
* |
| 20 |
* The Dreamcast's System ASIC (a.k.a. Holly) is responsible for receiving |
| 21 |
* hardware events from system peripherals and triggering an SH7750 IRQ. |
| 22 |
* Hardware events can trigger IRQs 13, 11, or 9 depending on which bits are |
| 23 |
* set in the Event Mask Registers (EMRs). When a hardware event is |
| 24 |
* triggered, its corresponding bit in the Event Status Registers (ESRs) |
| 25 |
* is set, and that bit should be rewritten to the ESR to acknowledge that |
| 26 |
* event. |
| 27 |
* |
| 28 |
* There are three 32-bit ESRs located at 0xa05f6900 - 0xa05f6908. Event |
| 29 |
* types can be found in arch/sh/include/mach-dreamcast/mach/sysasic.h. |
| 30 |
* There are three groups of EMRs that parallel the ESRs. Each EMR group |
| 31 |
* corresponds to an IRQ, so 0xa05f6910 - 0xa05f6918 triggers IRQ 13, |
| 32 |
* 0xa05f6920 - 0xa05f6928 triggers IRQ 11, and 0xa05f6930 - 0xa05f6938 |
| 33 |
* triggers IRQ 9. |
| 34 |
* |
| 35 |
* In the kernel, these events are mapped to virtual IRQs so that drivers can |
| 36 |
* respond to them as they would a normal interrupt. In order to keep this |
| 37 |
* mapping simple, the events are mapped as: |
| 38 |
* |
| 39 |
* 6900/6910 - Events 0-31, IRQ 13 |
| 40 |
* 6904/6924 - Events 32-63, IRQ 11 |
| 41 |
* 6908/6938 - Events 64-95, IRQ 9 |
| 42 |
* |
| 43 |
*/ |
| 44 |
|
| 45 |
#define ESR_BASE 0x005f6900 /* Base event status register */ |
| 46 |
#define EMR_BASE 0x005f6910 /* Base event mask register */ |
| 47 |
|
| 48 |
/* |
| 49 |
* Helps us determine the EMR group that this event belongs to: 0 = 0x6910, |
| 50 |
* 1 = 0x6920, 2 = 0x6930; also determine the event offset. |
| 51 |
*/ |
| 52 |
#define LEVEL(event) (((event) - HW_EVENT_IRQ_BASE) / 32) |
| 53 |
|
| 54 |
/* Return the hardware event's bit position within the EMR/ESR */ |
| 55 |
#define EVENT_BIT(event) (((event) - HW_EVENT_IRQ_BASE) & 31) |
| 56 |
|
| 57 |
/* |
| 58 |
* For each of these *_irq routines, the IRQ passed in is the virtual IRQ |
| 59 |
* (logically mapped to the corresponding bit for the hardware event). |
| 60 |
*/ |
| 61 |
|
| 62 |
/* Disable the hardware event by masking its bit in its EMR */ |
| 63 |
static inline void disable_systemasic_irq(struct irq_data *data) |
| 64 |
{ |
| 65 |
unsigned int irq = data->irq; |
| 66 |
__u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2); |
| 67 |
__u32 mask; |
| 68 |
|
| 69 |
mask = inl(emr); |
| 70 |
mask &= ~(1 << EVENT_BIT(irq)); |
| 71 |
outl(mask, emr); |
| 72 |
} |
| 73 |
|
| 74 |
/* Enable the hardware event by setting its bit in its EMR */ |
| 75 |
static inline void enable_systemasic_irq(struct irq_data *data) |
| 76 |
{ |
| 77 |
unsigned int irq = data->irq; |
| 78 |
__u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2); |
| 79 |
__u32 mask; |
| 80 |
|
| 81 |
mask = inl(emr); |
| 82 |
mask |= (1 << EVENT_BIT(irq)); |
| 83 |
outl(mask, emr); |
| 84 |
} |
| 85 |
|
| 86 |
/* Acknowledge a hardware event by writing its bit back to its ESR */ |
| 87 |
static void mask_ack_systemasic_irq(struct irq_data *data) |
| 88 |
{ |
| 89 |
unsigned int irq = data->irq; |
| 90 |
__u32 esr = ESR_BASE + (LEVEL(irq) << 2); |
| 91 |
disable_systemasic_irq(data); |
| 92 |
outl((1 << EVENT_BIT(irq)), esr); |
| 93 |
} |
| 94 |
|
| 95 |
struct irq_chip systemasic_int = { |
| 96 |
.name = "System ASIC", |
| 97 |
.irq_mask = disable_systemasic_irq, |
| 98 |
.irq_mask_ack = mask_ack_systemasic_irq, |
| 99 |
.irq_unmask = enable_systemasic_irq, |
| 100 |
}; |
| 101 |
|
| 102 |
/* |
| 103 |
* Map the hardware event indicated by the processor IRQ to a virtual IRQ. |
| 104 |
*/ |
| 105 |
int systemasic_irq_demux(int irq) |
| 106 |
{ |
| 107 |
__u32 emr, esr, status, level; |
| 108 |
__u32 j, bit; |
| 109 |
|
| 110 |
switch (irq) { |
| 111 |
case 13 + 16: |
| 112 |
level = 0; |
| 113 |
break; |
| 114 |
case 11 + 16: |
| 115 |
level = 1; |
| 116 |
break; |
| 117 |
case 9 + 16: |
| 118 |
level = 2; |
| 119 |
break; |
| 120 |
default: |
| 121 |
return irq; |
| 122 |
} |
| 123 |
emr = EMR_BASE + (level << 4) + (level << 2); |
| 124 |
esr = ESR_BASE + (level << 2); |
| 125 |
|
| 126 |
/* Mask the ESR to filter any spurious, unwanted interrupts */ |
| 127 |
status = inl(esr); |
| 128 |
status &= inl(emr); |
| 129 |
|
| 130 |
/* Now scan and find the first set bit as the event to map */ |
| 131 |
for (bit = 1, j = 0; j < 32; bit <<= 1, j++) { |
| 132 |
if (status & bit) { |
| 133 |
irq = HW_EVENT_IRQ_BASE + j + (level << 5); |
| 134 |
return irq; |
| 135 |
} |
| 136 |
} |
| 137 |
|
| 138 |
/* Not reached */ |
| 139 |
return irq; |
| 140 |
} |
| 141 |
|
| 142 |
void systemasic_irq_init(void) |
| 143 |
{ |
| 144 |
int irq_base, i; |
| 145 |
|
| 146 |
irq_base = irq_alloc_descs(HW_EVENT_IRQ_BASE, HW_EVENT_IRQ_BASE, |
| 147 |
HW_EVENT_IRQ_MAX - HW_EVENT_IRQ_BASE, -1); |
| 148 |
if (IS_ERR_VALUE(irq_base)) { |
| 149 |
pr_err("%s: failed hooking irqs\n", __func__); |
| 150 |
return; |
| 151 |
} |
| 152 |
|
| 153 |
for (i = HW_EVENT_IRQ_BASE; i < HW_EVENT_IRQ_MAX; i++) |
| 154 |
irq_set_chip_and_handler(i, &systemasic_int, handle_level_irq); |
| 155 |
} |