| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* DBAu1300 init and platform device setup. |
| 4 |
* |
| 5 |
* (c) 2009 Manuel Lauss <[email protected]> |
| 6 |
*/ |
| 7 |
|
| 8 |
#include <linux/clk.h> |
| 9 |
#include <linux/dma-mapping.h> |
| 10 |
#include <linux/gpio.h> |
| 11 |
#include <linux/gpio_keys.h> |
| 12 |
#include <linux/init.h> |
| 13 |
#include <linux/input.h> /* KEY_* codes */ |
| 14 |
#include <linux/i2c.h> |
| 15 |
#include <linux/io.h> |
| 16 |
#include <linux/leds.h> |
| 17 |
#include <linux/interrupt.h> |
| 18 |
#include <linux/ata_platform.h> |
| 19 |
#include <linux/mmc/host.h> |
| 20 |
#include <linux/mtd/mtd.h> |
| 21 |
#include <linux/mtd/platnand.h> |
| 22 |
#include <linux/platform_device.h> |
| 23 |
#include <linux/smsc911x.h> |
| 24 |
#include <linux/wm97xx.h> |
| 25 |
|
| 26 |
#include <asm/mach-au1x00/au1000.h> |
| 27 |
#include <asm/mach-au1x00/gpio-au1300.h> |
| 28 |
#include <asm/mach-au1x00/au1100_mmc.h> |
| 29 |
#include <asm/mach-au1x00/au1200fb.h> |
| 30 |
#include <asm/mach-au1x00/au1xxx_dbdma.h> |
| 31 |
#include <asm/mach-au1x00/au1xxx_psc.h> |
| 32 |
#include <asm/mach-db1x00/bcsr.h> |
| 33 |
#include <asm/mach-au1x00/prom.h> |
| 34 |
|
| 35 |
#include "platform.h" |
| 36 |
|
| 37 |
/* FPGA (external mux) interrupt sources */ |
| 38 |
#define DB1300_FIRST_INT (ALCHEMY_GPIC_INT_LAST + 1) |
| 39 |
#define DB1300_IDE_INT (DB1300_FIRST_INT + 0) |
| 40 |
#define DB1300_ETH_INT (DB1300_FIRST_INT + 1) |
| 41 |
#define DB1300_CF_INT (DB1300_FIRST_INT + 2) |
| 42 |
#define DB1300_VIDEO_INT (DB1300_FIRST_INT + 4) |
| 43 |
#define DB1300_HDMI_INT (DB1300_FIRST_INT + 5) |
| 44 |
#define DB1300_DC_INT (DB1300_FIRST_INT + 6) |
| 45 |
#define DB1300_FLASH_INT (DB1300_FIRST_INT + 7) |
| 46 |
#define DB1300_CF_INSERT_INT (DB1300_FIRST_INT + 8) |
| 47 |
#define DB1300_CF_EJECT_INT (DB1300_FIRST_INT + 9) |
| 48 |
#define DB1300_AC97_INT (DB1300_FIRST_INT + 10) |
| 49 |
#define DB1300_AC97_PEN_INT (DB1300_FIRST_INT + 11) |
| 50 |
#define DB1300_SD1_INSERT_INT (DB1300_FIRST_INT + 12) |
| 51 |
#define DB1300_SD1_EJECT_INT (DB1300_FIRST_INT + 13) |
| 52 |
#define DB1300_OTG_VBUS_OC_INT (DB1300_FIRST_INT + 14) |
| 53 |
#define DB1300_HOST_VBUS_OC_INT (DB1300_FIRST_INT + 15) |
| 54 |
#define DB1300_LAST_INT (DB1300_FIRST_INT + 15) |
| 55 |
|
| 56 |
/* SMSC9210 CS */ |
| 57 |
#define DB1300_ETH_PHYS_ADDR 0x19000000 |
| 58 |
#define DB1300_ETH_PHYS_END 0x197fffff |
| 59 |
|
| 60 |
/* ATA CS */ |
| 61 |
#define DB1300_IDE_PHYS_ADDR 0x18800000 |
| 62 |
#define DB1300_IDE_REG_SHIFT 5 |
| 63 |
#define DB1300_IDE_PHYS_LEN (16 << DB1300_IDE_REG_SHIFT) |
| 64 |
|
| 65 |
/* NAND CS */ |
| 66 |
#define DB1300_NAND_PHYS_ADDR 0x20000000 |
| 67 |
#define DB1300_NAND_PHYS_END 0x20000fff |
| 68 |
|
| 69 |
|
| 70 |
static struct i2c_board_info db1300_i2c_devs[] __initdata = { |
| 71 |
{ I2C_BOARD_INFO("wm8731", 0x1b), }, /* I2S audio codec */ |
| 72 |
{ I2C_BOARD_INFO("ne1619", 0x2d), }, /* adm1025-compat hwmon */ |
| 73 |
}; |
| 74 |
|
| 75 |
/* multifunction pins to assign to GPIO controller */ |
| 76 |
static int db1300_gpio_pins[] __initdata = { |
| 77 |
AU1300_PIN_LCDPWM0, AU1300_PIN_PSC2SYNC1, AU1300_PIN_WAKE1, |
| 78 |
AU1300_PIN_WAKE2, AU1300_PIN_WAKE3, AU1300_PIN_FG3AUX, |
| 79 |
AU1300_PIN_EXTCLK1, |
| 80 |
-1, /* terminator */ |
| 81 |
}; |
| 82 |
|
| 83 |
/* multifunction pins to assign to device functions */ |
| 84 |
static int db1300_dev_pins[] __initdata = { |
| 85 |
/* wake-from-str pins 0-3 */ |
| 86 |
AU1300_PIN_WAKE0, |
| 87 |
/* external clock sources for PSC0 */ |
| 88 |
AU1300_PIN_EXTCLK0, |
| 89 |
/* 8bit MMC interface on SD0: 6-9 */ |
| 90 |
AU1300_PIN_SD0DAT4, AU1300_PIN_SD0DAT5, AU1300_PIN_SD0DAT6, |
| 91 |
AU1300_PIN_SD0DAT7, |
| 92 |
/* UART1 pins: 11-18 */ |
| 93 |
AU1300_PIN_U1RI, AU1300_PIN_U1DCD, AU1300_PIN_U1DSR, |
| 94 |
AU1300_PIN_U1CTS, AU1300_PIN_U1RTS, AU1300_PIN_U1DTR, |
| 95 |
AU1300_PIN_U1RX, AU1300_PIN_U1TX, |
| 96 |
/* UART0 pins: 19-24 */ |
| 97 |
AU1300_PIN_U0RI, AU1300_PIN_U0DCD, AU1300_PIN_U0DSR, |
| 98 |
AU1300_PIN_U0CTS, AU1300_PIN_U0RTS, AU1300_PIN_U0DTR, |
| 99 |
/* UART2: 25-26 */ |
| 100 |
AU1300_PIN_U2RX, AU1300_PIN_U2TX, |
| 101 |
/* UART3: 27-28 */ |
| 102 |
AU1300_PIN_U3RX, AU1300_PIN_U3TX, |
| 103 |
/* LCD controller PWMs, ext pixclock: 30-31 */ |
| 104 |
AU1300_PIN_LCDPWM1, AU1300_PIN_LCDCLKIN, |
| 105 |
/* SD1 interface: 32-37 */ |
| 106 |
AU1300_PIN_SD1DAT0, AU1300_PIN_SD1DAT1, AU1300_PIN_SD1DAT2, |
| 107 |
AU1300_PIN_SD1DAT3, AU1300_PIN_SD1CMD, AU1300_PIN_SD1CLK, |
| 108 |
/* SD2 interface: 38-43 */ |
| 109 |
AU1300_PIN_SD2DAT0, AU1300_PIN_SD2DAT1, AU1300_PIN_SD2DAT2, |
| 110 |
AU1300_PIN_SD2DAT3, AU1300_PIN_SD2CMD, AU1300_PIN_SD2CLK, |
| 111 |
/* PSC0/1 clocks: 44-45 */ |
| 112 |
AU1300_PIN_PSC0CLK, AU1300_PIN_PSC1CLK, |
| 113 |
/* PSCs: 46-49/50-53/54-57/58-61 */ |
| 114 |
AU1300_PIN_PSC0SYNC0, AU1300_PIN_PSC0SYNC1, AU1300_PIN_PSC0D0, |
| 115 |
AU1300_PIN_PSC0D1, |
| 116 |
AU1300_PIN_PSC1SYNC0, AU1300_PIN_PSC1SYNC1, AU1300_PIN_PSC1D0, |
| 117 |
AU1300_PIN_PSC1D1, |
| 118 |
AU1300_PIN_PSC2SYNC0, AU1300_PIN_PSC2D0, |
| 119 |
AU1300_PIN_PSC2D1, |
| 120 |
AU1300_PIN_PSC3SYNC0, AU1300_PIN_PSC3SYNC1, AU1300_PIN_PSC3D0, |
| 121 |
AU1300_PIN_PSC3D1, |
| 122 |
/* PCMCIA interface: 62-70 */ |
| 123 |
AU1300_PIN_PCE2, AU1300_PIN_PCE1, AU1300_PIN_PIOS16, |
| 124 |
AU1300_PIN_PIOR, AU1300_PIN_PWE, AU1300_PIN_PWAIT, |
| 125 |
AU1300_PIN_PREG, AU1300_PIN_POE, AU1300_PIN_PIOW, |
| 126 |
/* camera interface H/V sync inputs: 71-72 */ |
| 127 |
AU1300_PIN_CIMLS, AU1300_PIN_CIMFS, |
| 128 |
/* PSC2/3 clocks: 73-74 */ |
| 129 |
AU1300_PIN_PSC2CLK, AU1300_PIN_PSC3CLK, |
| 130 |
-1, /* terminator */ |
| 131 |
}; |
| 132 |
|
| 133 |
static void __init db1300_gpio_config(void) |
| 134 |
{ |
| 135 |
int *i; |
| 136 |
|
| 137 |
i = &db1300_dev_pins[0]; |
| 138 |
while (*i != -1) |
| 139 |
au1300_pinfunc_to_dev(*i++); |
| 140 |
|
| 141 |
i = &db1300_gpio_pins[0]; |
| 142 |
while (*i != -1) |
| 143 |
au1300_gpio_direction_input(*i++);/* implies pin_to_gpio */ |
| 144 |
|
| 145 |
au1300_set_dbdma_gpio(1, AU1300_PIN_FG3AUX); |
| 146 |
} |
| 147 |
|
| 148 |
/**********************************************************************/ |
| 149 |
|
| 150 |
static u64 au1300_all_dmamask = DMA_BIT_MASK(32); |
| 151 |
|
| 152 |
static void au1300_nand_cmd_ctrl(struct nand_chip *this, int cmd, |
| 153 |
unsigned int ctrl) |
| 154 |
{ |
| 155 |
unsigned long ioaddr = (unsigned long)this->legacy.IO_ADDR_W; |
| 156 |
|
| 157 |
ioaddr &= 0xffffff00; |
| 158 |
|
| 159 |
if (ctrl & NAND_CLE) { |
| 160 |
ioaddr += MEM_STNAND_CMD; |
| 161 |
} else if (ctrl & NAND_ALE) { |
| 162 |
ioaddr += MEM_STNAND_ADDR; |
| 163 |
} else { |
| 164 |
/* assume we want to r/w real data by default */ |
| 165 |
ioaddr += MEM_STNAND_DATA; |
| 166 |
} |
| 167 |
this->legacy.IO_ADDR_R = this->legacy.IO_ADDR_W = (void __iomem *)ioaddr; |
| 168 |
if (cmd != NAND_CMD_NONE) { |
| 169 |
__raw_writeb(cmd, this->legacy.IO_ADDR_W); |
| 170 |
wmb(); |
| 171 |
} |
| 172 |
} |
| 173 |
|
| 174 |
static int au1300_nand_device_ready(struct nand_chip *this) |
| 175 |
{ |
| 176 |
return alchemy_rdsmem(AU1000_MEM_STSTAT) & 1; |
| 177 |
} |
| 178 |
|
| 179 |
static struct mtd_partition db1300_nand_parts[] = { |
| 180 |
{ |
| 181 |
.name = "NAND FS 0", |
| 182 |
.offset = 0, |
| 183 |
.size = 8 * 1024 * 1024, |
| 184 |
}, |
| 185 |
{ |
| 186 |
.name = "NAND FS 1", |
| 187 |
.offset = MTDPART_OFS_APPEND, |
| 188 |
.size = MTDPART_SIZ_FULL |
| 189 |
}, |
| 190 |
}; |
| 191 |
|
| 192 |
struct platform_nand_data db1300_nand_platdata = { |
| 193 |
.chip = { |
| 194 |
.nr_chips = 1, |
| 195 |
.chip_offset = 0, |
| 196 |
.nr_partitions = ARRAY_SIZE(db1300_nand_parts), |
| 197 |
.partitions = db1300_nand_parts, |
| 198 |
.chip_delay = 20, |
| 199 |
}, |
| 200 |
.ctrl = { |
| 201 |
.dev_ready = au1300_nand_device_ready, |
| 202 |
.cmd_ctrl = au1300_nand_cmd_ctrl, |
| 203 |
}, |
| 204 |
}; |
| 205 |
|
| 206 |
static struct resource db1300_nand_res[] = { |
| 207 |
[0] = { |
| 208 |
.start = DB1300_NAND_PHYS_ADDR, |
| 209 |
.end = DB1300_NAND_PHYS_ADDR + 0xff, |
| 210 |
.flags = IORESOURCE_MEM, |
| 211 |
}, |
| 212 |
}; |
| 213 |
|
| 214 |
static struct platform_device db1300_nand_dev = { |
| 215 |
.name = "gen_nand", |
| 216 |
.num_resources = ARRAY_SIZE(db1300_nand_res), |
| 217 |
.resource = db1300_nand_res, |
| 218 |
.id = -1, |
| 219 |
.dev = { |
| 220 |
.platform_data = &db1300_nand_platdata, |
| 221 |
} |
| 222 |
}; |
| 223 |
|
| 224 |
/**********************************************************************/ |
| 225 |
|
| 226 |
static struct resource db1300_eth_res[] = { |
| 227 |
[0] = { |
| 228 |
.start = DB1300_ETH_PHYS_ADDR, |
| 229 |
.end = DB1300_ETH_PHYS_END, |
| 230 |
.flags = IORESOURCE_MEM, |
| 231 |
}, |
| 232 |
[1] = { |
| 233 |
.start = DB1300_ETH_INT, |
| 234 |
.end = DB1300_ETH_INT, |
| 235 |
.flags = IORESOURCE_IRQ, |
| 236 |
}, |
| 237 |
}; |
| 238 |
|
| 239 |
static struct smsc911x_platform_config db1300_eth_config = { |
| 240 |
.phy_interface = PHY_INTERFACE_MODE_MII, |
| 241 |
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, |
| 242 |
.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, |
| 243 |
.flags = SMSC911X_USE_32BIT, |
| 244 |
}; |
| 245 |
|
| 246 |
static struct platform_device db1300_eth_dev = { |
| 247 |
.name = "smsc911x", |
| 248 |
.id = -1, |
| 249 |
.num_resources = ARRAY_SIZE(db1300_eth_res), |
| 250 |
.resource = db1300_eth_res, |
| 251 |
.dev = { |
| 252 |
.platform_data = &db1300_eth_config, |
| 253 |
}, |
| 254 |
}; |
| 255 |
|
| 256 |
/**********************************************************************/ |
| 257 |
|
| 258 |
static struct resource au1300_psc1_res[] = { |
| 259 |
[0] = { |
| 260 |
.start = AU1300_PSC1_PHYS_ADDR, |
| 261 |
.end = AU1300_PSC1_PHYS_ADDR + 0x0fff, |
| 262 |
.flags = IORESOURCE_MEM, |
| 263 |
}, |
| 264 |
[1] = { |
| 265 |
.start = AU1300_PSC1_INT, |
| 266 |
.end = AU1300_PSC1_INT, |
| 267 |
.flags = IORESOURCE_IRQ, |
| 268 |
}, |
| 269 |
[2] = { |
| 270 |
.start = AU1300_DSCR_CMD0_PSC1_TX, |
| 271 |
.end = AU1300_DSCR_CMD0_PSC1_TX, |
| 272 |
.flags = IORESOURCE_DMA, |
| 273 |
}, |
| 274 |
[3] = { |
| 275 |
.start = AU1300_DSCR_CMD0_PSC1_RX, |
| 276 |
.end = AU1300_DSCR_CMD0_PSC1_RX, |
| 277 |
.flags = IORESOURCE_DMA, |
| 278 |
}, |
| 279 |
}; |
| 280 |
|
| 281 |
static struct platform_device db1300_ac97_dev = { |
| 282 |
.name = "au1xpsc_ac97", |
| 283 |
.id = 1, /* PSC ID. match with AC97 codec ID! */ |
| 284 |
.num_resources = ARRAY_SIZE(au1300_psc1_res), |
| 285 |
.resource = au1300_psc1_res, |
| 286 |
}; |
| 287 |
|
| 288 |
/**********************************************************************/ |
| 289 |
|
| 290 |
static struct resource au1300_psc2_res[] = { |
| 291 |
[0] = { |
| 292 |
.start = AU1300_PSC2_PHYS_ADDR, |
| 293 |
.end = AU1300_PSC2_PHYS_ADDR + 0x0fff, |
| 294 |
.flags = IORESOURCE_MEM, |
| 295 |
}, |
| 296 |
[1] = { |
| 297 |
.start = AU1300_PSC2_INT, |
| 298 |
.end = AU1300_PSC2_INT, |
| 299 |
.flags = IORESOURCE_IRQ, |
| 300 |
}, |
| 301 |
[2] = { |
| 302 |
.start = AU1300_DSCR_CMD0_PSC2_TX, |
| 303 |
.end = AU1300_DSCR_CMD0_PSC2_TX, |
| 304 |
.flags = IORESOURCE_DMA, |
| 305 |
}, |
| 306 |
[3] = { |
| 307 |
.start = AU1300_DSCR_CMD0_PSC2_RX, |
| 308 |
.end = AU1300_DSCR_CMD0_PSC2_RX, |
| 309 |
.flags = IORESOURCE_DMA, |
| 310 |
}, |
| 311 |
}; |
| 312 |
|
| 313 |
static struct platform_device db1300_i2s_dev = { |
| 314 |
.name = "au1xpsc_i2s", |
| 315 |
.id = 2, /* PSC ID */ |
| 316 |
.num_resources = ARRAY_SIZE(au1300_psc2_res), |
| 317 |
.resource = au1300_psc2_res, |
| 318 |
}; |
| 319 |
|
| 320 |
/**********************************************************************/ |
| 321 |
|
| 322 |
static struct resource au1300_psc3_res[] = { |
| 323 |
[0] = { |
| 324 |
.start = AU1300_PSC3_PHYS_ADDR, |
| 325 |
.end = AU1300_PSC3_PHYS_ADDR + 0x0fff, |
| 326 |
.flags = IORESOURCE_MEM, |
| 327 |
}, |
| 328 |
[1] = { |
| 329 |
.start = AU1300_PSC3_INT, |
| 330 |
.end = AU1300_PSC3_INT, |
| 331 |
.flags = IORESOURCE_IRQ, |
| 332 |
}, |
| 333 |
[2] = { |
| 334 |
.start = AU1300_DSCR_CMD0_PSC3_TX, |
| 335 |
.end = AU1300_DSCR_CMD0_PSC3_TX, |
| 336 |
.flags = IORESOURCE_DMA, |
| 337 |
}, |
| 338 |
[3] = { |
| 339 |
.start = AU1300_DSCR_CMD0_PSC3_RX, |
| 340 |
.end = AU1300_DSCR_CMD0_PSC3_RX, |
| 341 |
.flags = IORESOURCE_DMA, |
| 342 |
}, |
| 343 |
}; |
| 344 |
|
| 345 |
static struct platform_device db1300_i2c_dev = { |
| 346 |
.name = "au1xpsc_smbus", |
| 347 |
.id = 0, /* bus number */ |
| 348 |
.num_resources = ARRAY_SIZE(au1300_psc3_res), |
| 349 |
.resource = au1300_psc3_res, |
| 350 |
}; |
| 351 |
|
| 352 |
/**********************************************************************/ |
| 353 |
|
| 354 |
/* proper key assignments when facing the LCD panel. For key assignments |
| 355 |
* according to the schematics swap up with down and left with right. |
| 356 |
* I chose to use it to emulate the arrow keys of a keyboard. |
| 357 |
*/ |
| 358 |
static struct gpio_keys_button db1300_5waysw_arrowkeys[] = { |
| 359 |
{ |
| 360 |
.code = KEY_DOWN, |
| 361 |
.gpio = AU1300_PIN_LCDPWM0, |
| 362 |
.type = EV_KEY, |
| 363 |
.debounce_interval = 1, |
| 364 |
.active_low = 1, |
| 365 |
.desc = "5waysw-down", |
| 366 |
}, |
| 367 |
{ |
| 368 |
.code = KEY_UP, |
| 369 |
.gpio = AU1300_PIN_PSC2SYNC1, |
| 370 |
.type = EV_KEY, |
| 371 |
.debounce_interval = 1, |
| 372 |
.active_low = 1, |
| 373 |
.desc = "5waysw-up", |
| 374 |
}, |
| 375 |
{ |
| 376 |
.code = KEY_RIGHT, |
| 377 |
.gpio = AU1300_PIN_WAKE3, |
| 378 |
.type = EV_KEY, |
| 379 |
.debounce_interval = 1, |
| 380 |
.active_low = 1, |
| 381 |
.desc = "5waysw-right", |
| 382 |
}, |
| 383 |
{ |
| 384 |
.code = KEY_LEFT, |
| 385 |
.gpio = AU1300_PIN_WAKE2, |
| 386 |
.type = EV_KEY, |
| 387 |
.debounce_interval = 1, |
| 388 |
.active_low = 1, |
| 389 |
.desc = "5waysw-left", |
| 390 |
}, |
| 391 |
{ |
| 392 |
.code = KEY_ENTER, |
| 393 |
.gpio = AU1300_PIN_WAKE1, |
| 394 |
.type = EV_KEY, |
| 395 |
.debounce_interval = 1, |
| 396 |
.active_low = 1, |
| 397 |
.desc = "5waysw-push", |
| 398 |
}, |
| 399 |
}; |
| 400 |
|
| 401 |
static struct gpio_keys_platform_data db1300_5waysw_data = { |
| 402 |
.buttons = db1300_5waysw_arrowkeys, |
| 403 |
.nbuttons = ARRAY_SIZE(db1300_5waysw_arrowkeys), |
| 404 |
.rep = 1, |
| 405 |
.name = "db1300-5wayswitch", |
| 406 |
}; |
| 407 |
|
| 408 |
static struct platform_device db1300_5waysw_dev = { |
| 409 |
.name = "gpio-keys", |
| 410 |
.dev = { |
| 411 |
.platform_data = &db1300_5waysw_data, |
| 412 |
}, |
| 413 |
}; |
| 414 |
|
| 415 |
/**********************************************************************/ |
| 416 |
|
| 417 |
static struct pata_platform_info db1300_ide_info = { |
| 418 |
.ioport_shift = DB1300_IDE_REG_SHIFT, |
| 419 |
}; |
| 420 |
|
| 421 |
#define IDE_ALT_START (14 << DB1300_IDE_REG_SHIFT) |
| 422 |
static struct resource db1300_ide_res[] = { |
| 423 |
[0] = { |
| 424 |
.start = DB1300_IDE_PHYS_ADDR, |
| 425 |
.end = DB1300_IDE_PHYS_ADDR + IDE_ALT_START - 1, |
| 426 |
.flags = IORESOURCE_MEM, |
| 427 |
}, |
| 428 |
[1] = { |
| 429 |
.start = DB1300_IDE_PHYS_ADDR + IDE_ALT_START, |
| 430 |
.end = DB1300_IDE_PHYS_ADDR + DB1300_IDE_PHYS_LEN - 1, |
| 431 |
.flags = IORESOURCE_MEM, |
| 432 |
}, |
| 433 |
[2] = { |
| 434 |
.start = DB1300_IDE_INT, |
| 435 |
.end = DB1300_IDE_INT, |
| 436 |
.flags = IORESOURCE_IRQ, |
| 437 |
}, |
| 438 |
}; |
| 439 |
|
| 440 |
static struct platform_device db1300_ide_dev = { |
| 441 |
.dev = { |
| 442 |
.dma_mask = &au1300_all_dmamask, |
| 443 |
.coherent_dma_mask = DMA_BIT_MASK(32), |
| 444 |
.platform_data = &db1300_ide_info, |
| 445 |
}, |
| 446 |
.name = "pata_platform", |
| 447 |
.resource = db1300_ide_res, |
| 448 |
.num_resources = ARRAY_SIZE(db1300_ide_res), |
| 449 |
}; |
| 450 |
|
| 451 |
/**********************************************************************/ |
| 452 |
|
| 453 |
#ifdef CONFIG_MMC_AU1X |
| 454 |
static irqreturn_t db1300_mmc_cd(int irq, void *ptr) |
| 455 |
{ |
| 456 |
disable_irq_nosync(irq); |
| 457 |
return IRQ_WAKE_THREAD; |
| 458 |
} |
| 459 |
|
| 460 |
static irqreturn_t db1300_mmc_cdfn(int irq, void *ptr) |
| 461 |
{ |
| 462 |
mmc_detect_change(ptr, msecs_to_jiffies(200)); |
| 463 |
|
| 464 |
msleep(100); /* debounce */ |
| 465 |
if (irq == DB1300_SD1_INSERT_INT) |
| 466 |
enable_irq(DB1300_SD1_EJECT_INT); |
| 467 |
else |
| 468 |
enable_irq(DB1300_SD1_INSERT_INT); |
| 469 |
|
| 470 |
return IRQ_HANDLED; |
| 471 |
} |
| 472 |
|
| 473 |
static int db1300_mmc_card_readonly(void *mmc_host) |
| 474 |
{ |
| 475 |
/* it uses SD1 interface, but the DB1200's SD0 bit in the CPLD */ |
| 476 |
return bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD0WP; |
| 477 |
} |
| 478 |
|
| 479 |
static int db1300_mmc_card_inserted(void *mmc_host) |
| 480 |
{ |
| 481 |
return bcsr_read(BCSR_SIGSTAT) & (1 << 12); /* insertion irq signal */ |
| 482 |
} |
| 483 |
|
| 484 |
static int db1300_mmc_cd_setup(void *mmc_host, int en) |
| 485 |
{ |
| 486 |
int ret; |
| 487 |
|
| 488 |
if (en) { |
| 489 |
ret = request_threaded_irq(DB1300_SD1_INSERT_INT, db1300_mmc_cd, |
| 490 |
db1300_mmc_cdfn, 0, "sd_insert", mmc_host); |
| 491 |
if (ret) |
| 492 |
goto out; |
| 493 |
|
| 494 |
ret = request_threaded_irq(DB1300_SD1_EJECT_INT, db1300_mmc_cd, |
| 495 |
db1300_mmc_cdfn, 0, "sd_eject", mmc_host); |
| 496 |
if (ret) { |
| 497 |
free_irq(DB1300_SD1_INSERT_INT, mmc_host); |
| 498 |
goto out; |
| 499 |
} |
| 500 |
|
| 501 |
if (db1300_mmc_card_inserted(mmc_host)) |
| 502 |
enable_irq(DB1300_SD1_EJECT_INT); |
| 503 |
else |
| 504 |
enable_irq(DB1300_SD1_INSERT_INT); |
| 505 |
|
| 506 |
} else { |
| 507 |
free_irq(DB1300_SD1_INSERT_INT, mmc_host); |
| 508 |
free_irq(DB1300_SD1_EJECT_INT, mmc_host); |
| 509 |
} |
| 510 |
ret = 0; |
| 511 |
out: |
| 512 |
return ret; |
| 513 |
} |
| 514 |
|
| 515 |
static void db1300_mmcled_set(struct led_classdev *led, |
| 516 |
enum led_brightness brightness) |
| 517 |
{ |
| 518 |
if (brightness != LED_OFF) |
| 519 |
bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED0, 0); |
| 520 |
else |
| 521 |
bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED0); |
| 522 |
} |
| 523 |
|
| 524 |
static struct led_classdev db1300_mmc_led = { |
| 525 |
.brightness_set = db1300_mmcled_set, |
| 526 |
}; |
| 527 |
|
| 528 |
struct au1xmmc_platform_data db1300_sd1_platdata = { |
| 529 |
.cd_setup = db1300_mmc_cd_setup, |
| 530 |
.card_inserted = db1300_mmc_card_inserted, |
| 531 |
.card_readonly = db1300_mmc_card_readonly, |
| 532 |
.led = &db1300_mmc_led, |
| 533 |
}; |
| 534 |
|
| 535 |
static struct resource au1300_sd1_res[] = { |
| 536 |
[0] = { |
| 537 |
.start = AU1300_SD1_PHYS_ADDR, |
| 538 |
.end = AU1300_SD1_PHYS_ADDR, |
| 539 |
.flags = IORESOURCE_MEM, |
| 540 |
}, |
| 541 |
[1] = { |
| 542 |
.start = AU1300_SD1_INT, |
| 543 |
.end = AU1300_SD1_INT, |
| 544 |
.flags = IORESOURCE_IRQ, |
| 545 |
}, |
| 546 |
[2] = { |
| 547 |
.start = AU1300_DSCR_CMD0_SDMS_TX1, |
| 548 |
.end = AU1300_DSCR_CMD0_SDMS_TX1, |
| 549 |
.flags = IORESOURCE_DMA, |
| 550 |
}, |
| 551 |
[3] = { |
| 552 |
.start = AU1300_DSCR_CMD0_SDMS_RX1, |
| 553 |
.end = AU1300_DSCR_CMD0_SDMS_RX1, |
| 554 |
.flags = IORESOURCE_DMA, |
| 555 |
}, |
| 556 |
}; |
| 557 |
|
| 558 |
static struct platform_device db1300_sd1_dev = { |
| 559 |
.dev = { |
| 560 |
.dma_mask = &au1300_all_dmamask, |
| 561 |
.coherent_dma_mask = DMA_BIT_MASK(32), |
| 562 |
.platform_data = &db1300_sd1_platdata, |
| 563 |
}, |
| 564 |
.name = "au1xxx-mmc", |
| 565 |
.id = 1, |
| 566 |
.resource = au1300_sd1_res, |
| 567 |
.num_resources = ARRAY_SIZE(au1300_sd1_res), |
| 568 |
}; |
| 569 |
|
| 570 |
/**********************************************************************/ |
| 571 |
|
| 572 |
static int db1300_movinand_inserted(void *mmc_host) |
| 573 |
{ |
| 574 |
return 0; /* disable for now, it doesn't work yet */ |
| 575 |
} |
| 576 |
|
| 577 |
static int db1300_movinand_readonly(void *mmc_host) |
| 578 |
{ |
| 579 |
return 0; |
| 580 |
} |
| 581 |
|
| 582 |
static void db1300_movinand_led_set(struct led_classdev *led, |
| 583 |
enum led_brightness brightness) |
| 584 |
{ |
| 585 |
if (brightness != LED_OFF) |
| 586 |
bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED1, 0); |
| 587 |
else |
| 588 |
bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED1); |
| 589 |
} |
| 590 |
|
| 591 |
static struct led_classdev db1300_movinand_led = { |
| 592 |
.brightness_set = db1300_movinand_led_set, |
| 593 |
}; |
| 594 |
|
| 595 |
struct au1xmmc_platform_data db1300_sd0_platdata = { |
| 596 |
.card_inserted = db1300_movinand_inserted, |
| 597 |
.card_readonly = db1300_movinand_readonly, |
| 598 |
.led = &db1300_movinand_led, |
| 599 |
.mask_host_caps = MMC_CAP_NEEDS_POLL, |
| 600 |
}; |
| 601 |
|
| 602 |
static struct resource au1300_sd0_res[] = { |
| 603 |
[0] = { |
| 604 |
.start = AU1100_SD0_PHYS_ADDR, |
| 605 |
.end = AU1100_SD0_PHYS_ADDR, |
| 606 |
.flags = IORESOURCE_MEM, |
| 607 |
}, |
| 608 |
[1] = { |
| 609 |
.start = AU1300_SD0_INT, |
| 610 |
.end = AU1300_SD0_INT, |
| 611 |
.flags = IORESOURCE_IRQ, |
| 612 |
}, |
| 613 |
[2] = { |
| 614 |
.start = AU1300_DSCR_CMD0_SDMS_TX0, |
| 615 |
.end = AU1300_DSCR_CMD0_SDMS_TX0, |
| 616 |
.flags = IORESOURCE_DMA, |
| 617 |
}, |
| 618 |
[3] = { |
| 619 |
.start = AU1300_DSCR_CMD0_SDMS_RX0, |
| 620 |
.end = AU1300_DSCR_CMD0_SDMS_RX0, |
| 621 |
.flags = IORESOURCE_DMA, |
| 622 |
}, |
| 623 |
}; |
| 624 |
|
| 625 |
static struct platform_device db1300_sd0_dev = { |
| 626 |
.dev = { |
| 627 |
.dma_mask = &au1300_all_dmamask, |
| 628 |
.coherent_dma_mask = DMA_BIT_MASK(32), |
| 629 |
.platform_data = &db1300_sd0_platdata, |
| 630 |
}, |
| 631 |
.name = "au1xxx-mmc", |
| 632 |
.id = 0, |
| 633 |
.resource = au1300_sd0_res, |
| 634 |
.num_resources = ARRAY_SIZE(au1300_sd0_res), |
| 635 |
}; |
| 636 |
#endif /* CONFIG_MMC_AU1X */ |
| 637 |
|
| 638 |
/**********************************************************************/ |
| 639 |
|
| 640 |
static struct platform_device db1300_wm9715_dev = { |
| 641 |
.name = "wm9712-codec", |
| 642 |
.id = 1, /* ID of PSC for AC97 audio, see asoc glue! */ |
| 643 |
}; |
| 644 |
|
| 645 |
static struct platform_device db1300_ac97dma_dev = { |
| 646 |
.name = "au1xpsc-pcm", |
| 647 |
.id = 1, /* PSC ID */ |
| 648 |
}; |
| 649 |
|
| 650 |
static struct platform_device db1300_i2sdma_dev = { |
| 651 |
.name = "au1xpsc-pcm", |
| 652 |
.id = 2, /* PSC ID */ |
| 653 |
}; |
| 654 |
|
| 655 |
static struct platform_device db1300_sndac97_dev = { |
| 656 |
.name = "db1300-ac97", |
| 657 |
.dev = { |
| 658 |
.dma_mask = &au1300_all_dmamask, |
| 659 |
.coherent_dma_mask = DMA_BIT_MASK(32), |
| 660 |
}, |
| 661 |
}; |
| 662 |
|
| 663 |
static struct platform_device db1300_sndi2s_dev = { |
| 664 |
.name = "db1300-i2s", |
| 665 |
.dev = { |
| 666 |
.dma_mask = &au1300_all_dmamask, |
| 667 |
.coherent_dma_mask = DMA_BIT_MASK(32), |
| 668 |
}, |
| 669 |
}; |
| 670 |
|
| 671 |
/**********************************************************************/ |
| 672 |
|
| 673 |
static int db1300fb_panel_index(void) |
| 674 |
{ |
| 675 |
return 9; /* DB1300_800x480 */ |
| 676 |
} |
| 677 |
|
| 678 |
static int db1300fb_panel_init(void) |
| 679 |
{ |
| 680 |
/* Apply power (Vee/Vdd logic is inverted on Panel DB1300_800x480) */ |
| 681 |
bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD, |
| 682 |
BCSR_BOARD_LCDBL); |
| 683 |
return 0; |
| 684 |
} |
| 685 |
|
| 686 |
static int db1300fb_panel_shutdown(void) |
| 687 |
{ |
| 688 |
/* Remove power (Vee/Vdd logic is inverted on Panel DB1300_800x480) */ |
| 689 |
bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDBL, |
| 690 |
BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD); |
| 691 |
return 0; |
| 692 |
} |
| 693 |
|
| 694 |
static struct au1200fb_platdata db1300fb_pd = { |
| 695 |
.panel_index = db1300fb_panel_index, |
| 696 |
.panel_init = db1300fb_panel_init, |
| 697 |
.panel_shutdown = db1300fb_panel_shutdown, |
| 698 |
}; |
| 699 |
|
| 700 |
static struct resource au1300_lcd_res[] = { |
| 701 |
[0] = { |
| 702 |
.start = AU1200_LCD_PHYS_ADDR, |
| 703 |
.end = AU1200_LCD_PHYS_ADDR + 0x800 - 1, |
| 704 |
.flags = IORESOURCE_MEM, |
| 705 |
}, |
| 706 |
[1] = { |
| 707 |
.start = AU1300_LCD_INT, |
| 708 |
.end = AU1300_LCD_INT, |
| 709 |
.flags = IORESOURCE_IRQ, |
| 710 |
} |
| 711 |
}; |
| 712 |
|
| 713 |
|
| 714 |
static struct platform_device db1300_lcd_dev = { |
| 715 |
.name = "au1200-lcd", |
| 716 |
.id = 0, |
| 717 |
.dev = { |
| 718 |
.dma_mask = &au1300_all_dmamask, |
| 719 |
.coherent_dma_mask = DMA_BIT_MASK(32), |
| 720 |
.platform_data = &db1300fb_pd, |
| 721 |
}, |
| 722 |
.num_resources = ARRAY_SIZE(au1300_lcd_res), |
| 723 |
.resource = au1300_lcd_res, |
| 724 |
}; |
| 725 |
|
| 726 |
/**********************************************************************/ |
| 727 |
|
| 728 |
#if IS_ENABLED(CONFIG_TOUCHSCREEN_WM97XX) |
| 729 |
static struct wm97xx_mach_ops db1300_wm97xx_ops = { |
| 730 |
.irq_gpio = WM97XX_GPIO_3, |
| 731 |
}; |
| 732 |
|
| 733 |
static int db1300_wm97xx_probe(struct platform_device *pdev) |
| 734 |
{ |
| 735 |
struct wm97xx *wm = platform_get_drvdata(pdev); |
| 736 |
|
| 737 |
/* external pendown indicator */ |
| 738 |
wm97xx_config_gpio(wm, WM97XX_GPIO_13, WM97XX_GPIO_IN, |
| 739 |
WM97XX_GPIO_POL_LOW, WM97XX_GPIO_STICKY, |
| 740 |
WM97XX_GPIO_WAKE); |
| 741 |
|
| 742 |
/* internal "virtual" pendown gpio */ |
| 743 |
wm97xx_config_gpio(wm, WM97XX_GPIO_3, WM97XX_GPIO_OUT, |
| 744 |
WM97XX_GPIO_POL_LOW, WM97XX_GPIO_NOTSTICKY, |
| 745 |
WM97XX_GPIO_NOWAKE); |
| 746 |
|
| 747 |
wm->pen_irq = DB1300_AC97_PEN_INT; |
| 748 |
|
| 749 |
return wm97xx_register_mach_ops(wm, &db1300_wm97xx_ops); |
| 750 |
} |
| 751 |
#else |
| 752 |
static int db1300_wm97xx_probe(struct platform_device *pdev) |
| 753 |
{ |
| 754 |
return -ENODEV; |
| 755 |
} |
| 756 |
#endif |
| 757 |
|
| 758 |
static struct platform_driver db1300_wm97xx_driver = { |
| 759 |
.driver.name = "wm97xx-touch", |
| 760 |
.driver.owner = THIS_MODULE, |
| 761 |
.probe = db1300_wm97xx_probe, |
| 762 |
}; |
| 763 |
|
| 764 |
/**********************************************************************/ |
| 765 |
|
| 766 |
static struct platform_device *db1300_dev[] __initdata = { |
| 767 |
&db1300_eth_dev, |
| 768 |
&db1300_i2c_dev, |
| 769 |
&db1300_5waysw_dev, |
| 770 |
&db1300_nand_dev, |
| 771 |
&db1300_ide_dev, |
| 772 |
#ifdef CONFIG_MMC_AU1X |
| 773 |
&db1300_sd0_dev, |
| 774 |
&db1300_sd1_dev, |
| 775 |
#endif |
| 776 |
&db1300_lcd_dev, |
| 777 |
&db1300_ac97_dev, |
| 778 |
&db1300_i2s_dev, |
| 779 |
&db1300_wm9715_dev, |
| 780 |
&db1300_ac97dma_dev, |
| 781 |
&db1300_i2sdma_dev, |
| 782 |
&db1300_sndac97_dev, |
| 783 |
&db1300_sndi2s_dev, |
| 784 |
}; |
| 785 |
|
| 786 |
int __init db1300_dev_setup(void) |
| 787 |
{ |
| 788 |
int swapped, cpldirq; |
| 789 |
struct clk *c; |
| 790 |
|
| 791 |
/* setup CPLD IRQ muxer */ |
| 792 |
cpldirq = au1300_gpio_to_irq(AU1300_PIN_EXTCLK1); |
| 793 |
irq_set_irq_type(cpldirq, IRQ_TYPE_LEVEL_HIGH); |
| 794 |
bcsr_init_irq(DB1300_FIRST_INT, DB1300_LAST_INT, cpldirq); |
| 795 |
|
| 796 |
/* insert/eject IRQs: one always triggers so don't enable them |
| 797 |
* when doing request_irq() on them. DB1200 has this bug too. |
| 798 |
*/ |
| 799 |
irq_set_status_flags(DB1300_SD1_INSERT_INT, IRQ_NOAUTOEN); |
| 800 |
irq_set_status_flags(DB1300_SD1_EJECT_INT, IRQ_NOAUTOEN); |
| 801 |
irq_set_status_flags(DB1300_CF_INSERT_INT, IRQ_NOAUTOEN); |
| 802 |
irq_set_status_flags(DB1300_CF_EJECT_INT, IRQ_NOAUTOEN); |
| 803 |
|
| 804 |
/* |
| 805 |
* setup board |
| 806 |
*/ |
| 807 |
prom_get_ethernet_addr(&db1300_eth_config.mac[0]); |
| 808 |
|
| 809 |
i2c_register_board_info(0, db1300_i2c_devs, |
| 810 |
ARRAY_SIZE(db1300_i2c_devs)); |
| 811 |
|
| 812 |
if (platform_driver_register(&db1300_wm97xx_driver)) |
| 813 |
pr_warn("DB1300: failed to init touch pen irq support!\n"); |
| 814 |
|
| 815 |
/* Audio PSC clock is supplied by codecs (PSC1, 2) */ |
| 816 |
__raw_writel(PSC_SEL_CLK_SERCLK, |
| 817 |
(void __iomem *)KSEG1ADDR(AU1300_PSC1_PHYS_ADDR) + PSC_SEL_OFFSET); |
| 818 |
wmb(); |
| 819 |
__raw_writel(PSC_SEL_CLK_SERCLK, |
| 820 |
(void __iomem *)KSEG1ADDR(AU1300_PSC2_PHYS_ADDR) + PSC_SEL_OFFSET); |
| 821 |
wmb(); |
| 822 |
/* I2C driver wants 50MHz, get as close as possible */ |
| 823 |
c = clk_get(NULL, "psc3_intclk"); |
| 824 |
if (!IS_ERR(c)) { |
| 825 |
clk_set_rate(c, 50000000); |
| 826 |
clk_prepare_enable(c); |
| 827 |
clk_put(c); |
| 828 |
} |
| 829 |
__raw_writel(PSC_SEL_CLK_INTCLK, |
| 830 |
(void __iomem *)KSEG1ADDR(AU1300_PSC3_PHYS_ADDR) + PSC_SEL_OFFSET); |
| 831 |
wmb(); |
| 832 |
|
| 833 |
/* enable power to USB ports */ |
| 834 |
bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_USBHPWR | BCSR_RESETS_OTGPWR); |
| 835 |
|
| 836 |
/* although it is socket #0, it uses the CPLD bits which previous boards |
| 837 |
* have used for socket #1. |
| 838 |
*/ |
| 839 |
db1x_register_pcmcia_socket( |
| 840 |
AU1000_PCMCIA_ATTR_PHYS_ADDR, |
| 841 |
AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x00400000 - 1, |
| 842 |
AU1000_PCMCIA_MEM_PHYS_ADDR, |
| 843 |
AU1000_PCMCIA_MEM_PHYS_ADDR + 0x00400000 - 1, |
| 844 |
AU1000_PCMCIA_IO_PHYS_ADDR, |
| 845 |
AU1000_PCMCIA_IO_PHYS_ADDR + 0x00010000 - 1, |
| 846 |
DB1300_CF_INT, DB1300_CF_INSERT_INT, 0, DB1300_CF_EJECT_INT, 1); |
| 847 |
|
| 848 |
swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1200_SWAPBOOT; |
| 849 |
db1x_register_norflash(64 << 20, 2, swapped); |
| 850 |
|
| 851 |
return platform_add_devices(db1300_dev, ARRAY_SIZE(db1300_dev)); |
| 852 |
} |
| 853 |
|
| 854 |
|
| 855 |
int __init db1300_board_setup(void) |
| 856 |
{ |
| 857 |
unsigned short whoami; |
| 858 |
|
| 859 |
bcsr_init(DB1300_BCSR_PHYS_ADDR, |
| 860 |
DB1300_BCSR_PHYS_ADDR + DB1300_BCSR_HEXLED_OFS); |
| 861 |
|
| 862 |
whoami = bcsr_read(BCSR_WHOAMI); |
| 863 |
if (BCSR_WHOAMI_BOARD(whoami) != BCSR_WHOAMI_DB1300) |
| 864 |
return -ENODEV; |
| 865 |
|
| 866 |
db1300_gpio_config(); |
| 867 |
|
| 868 |
printk(KERN_INFO "NetLogic DBAu1300 Development Platform.\n\t" |
| 869 |
"BoardID %d CPLD Rev %d DaughtercardID %d\n", |
| 870 |
BCSR_WHOAMI_BOARD(whoami), BCSR_WHOAMI_CPLD(whoami), |
| 871 |
BCSR_WHOAMI_DCID(whoami)); |
| 872 |
|
| 873 |
/* enable UARTs, YAMON only enables #2 */ |
| 874 |
alchemy_uart_enable(AU1300_UART0_PHYS_ADDR); |
| 875 |
alchemy_uart_enable(AU1300_UART1_PHYS_ADDR); |
| 876 |
alchemy_uart_enable(AU1300_UART3_PHYS_ADDR); |
| 877 |
|
| 878 |
return 0; |
| 879 |
} |