| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later |
| 2 |
/* |
| 3 |
* GPR board platform device registration (Au1550) |
| 4 |
* |
| 5 |
* Copyright (C) 2010 Wolfgang Grandegger <[email protected]> |
| 6 |
*/ |
| 7 |
|
| 8 |
#include <linux/delay.h> |
| 9 |
#include <linux/init.h> |
| 10 |
#include <linux/interrupt.h> |
| 11 |
#include <linux/kernel.h> |
| 12 |
#include <linux/platform_device.h> |
| 13 |
#include <linux/pm.h> |
| 14 |
#include <linux/mtd/partitions.h> |
| 15 |
#include <linux/mtd/physmap.h> |
| 16 |
#include <linux/leds.h> |
| 17 |
#include <linux/gpio.h> |
| 18 |
#include <linux/i2c.h> |
| 19 |
#include <linux/platform_data/i2c-gpio.h> |
| 20 |
#include <linux/gpio/machine.h> |
| 21 |
#include <asm/bootinfo.h> |
| 22 |
#include <asm/idle.h> |
| 23 |
#include <asm/reboot.h> |
| 24 |
#include <asm/setup.h> |
| 25 |
#include <asm/mach-au1x00/au1000.h> |
| 26 |
#include <asm/mach-au1x00/gpio-au1000.h> |
| 27 |
#include <prom.h> |
| 28 |
|
| 29 |
const char *get_system_type(void) |
| 30 |
{ |
| 31 |
return "GPR"; |
| 32 |
} |
| 33 |
|
| 34 |
void prom_putchar(char c) |
| 35 |
{ |
| 36 |
alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c); |
| 37 |
} |
| 38 |
|
| 39 |
static void gpr_reset(char *c) |
| 40 |
{ |
| 41 |
/* switch System-LED to orange (red# and green# on) */ |
| 42 |
alchemy_gpio_direction_output(4, 0); |
| 43 |
alchemy_gpio_direction_output(5, 0); |
| 44 |
|
| 45 |
/* trigger watchdog to reset board in 200ms */ |
| 46 |
printk(KERN_EMERG "Triggering watchdog soft reset...\n"); |
| 47 |
raw_local_irq_disable(); |
| 48 |
alchemy_gpio_direction_output(1, 0); |
| 49 |
udelay(1); |
| 50 |
alchemy_gpio_set_value(1, 1); |
| 51 |
while (1) |
| 52 |
cpu_wait(); |
| 53 |
} |
| 54 |
|
| 55 |
static void gpr_power_off(void) |
| 56 |
{ |
| 57 |
while (1) |
| 58 |
cpu_wait(); |
| 59 |
} |
| 60 |
|
| 61 |
void __init board_setup(void) |
| 62 |
{ |
| 63 |
printk(KERN_INFO "Trapeze ITS GPR board\n"); |
| 64 |
|
| 65 |
pm_power_off = gpr_power_off; |
| 66 |
_machine_halt = gpr_power_off; |
| 67 |
_machine_restart = gpr_reset; |
| 68 |
|
| 69 |
/* Enable UART1/3 */ |
| 70 |
alchemy_uart_enable(AU1000_UART3_PHYS_ADDR); |
| 71 |
alchemy_uart_enable(AU1000_UART1_PHYS_ADDR); |
| 72 |
|
| 73 |
/* Take away Reset of UMTS-card */ |
| 74 |
alchemy_gpio_direction_output(215, 1); |
| 75 |
} |
| 76 |
|
| 77 |
/* |
| 78 |
* Watchdog |
| 79 |
*/ |
| 80 |
static struct resource gpr_wdt_resource[] = { |
| 81 |
[0] = { |
| 82 |
.start = 1, |
| 83 |
.end = 1, |
| 84 |
.name = "gpr-adm6320-wdt", |
| 85 |
.flags = IORESOURCE_IRQ, |
| 86 |
} |
| 87 |
}; |
| 88 |
|
| 89 |
static struct platform_device gpr_wdt_device = { |
| 90 |
.name = "adm6320-wdt", |
| 91 |
.id = 0, |
| 92 |
.num_resources = ARRAY_SIZE(gpr_wdt_resource), |
| 93 |
.resource = gpr_wdt_resource, |
| 94 |
}; |
| 95 |
|
| 96 |
/* |
| 97 |
* FLASH |
| 98 |
* |
| 99 |
* 0x00000000-0x00200000 : "kernel" |
| 100 |
* 0x00200000-0x00a00000 : "rootfs" |
| 101 |
* 0x01d00000-0x01f00000 : "config" |
| 102 |
* 0x01c00000-0x01d00000 : "yamon" |
| 103 |
* 0x01d00000-0x01d40000 : "yamon env vars" |
| 104 |
* 0x00000000-0x00a00000 : "kernel+rootfs" |
| 105 |
*/ |
| 106 |
static struct mtd_partition gpr_mtd_partitions[] = { |
| 107 |
{ |
| 108 |
.name = "kernel", |
| 109 |
.size = 0x00200000, |
| 110 |
.offset = 0, |
| 111 |
}, |
| 112 |
{ |
| 113 |
.name = "rootfs", |
| 114 |
.size = 0x00800000, |
| 115 |
.offset = MTDPART_OFS_APPEND, |
| 116 |
.mask_flags = MTD_WRITEABLE, |
| 117 |
}, |
| 118 |
{ |
| 119 |
.name = "config", |
| 120 |
.size = 0x00200000, |
| 121 |
.offset = 0x01d00000, |
| 122 |
}, |
| 123 |
{ |
| 124 |
.name = "yamon", |
| 125 |
.size = 0x00100000, |
| 126 |
.offset = 0x01c00000, |
| 127 |
}, |
| 128 |
{ |
| 129 |
.name = "yamon env vars", |
| 130 |
.size = 0x00040000, |
| 131 |
.offset = MTDPART_OFS_APPEND, |
| 132 |
}, |
| 133 |
{ |
| 134 |
.name = "kernel+rootfs", |
| 135 |
.size = 0x00a00000, |
| 136 |
.offset = 0, |
| 137 |
}, |
| 138 |
}; |
| 139 |
|
| 140 |
static struct physmap_flash_data gpr_flash_data = { |
| 141 |
.width = 4, |
| 142 |
.nr_parts = ARRAY_SIZE(gpr_mtd_partitions), |
| 143 |
.parts = gpr_mtd_partitions, |
| 144 |
}; |
| 145 |
|
| 146 |
static struct resource gpr_mtd_resource = { |
| 147 |
.start = 0x1e000000, |
| 148 |
.end = 0x1fffffff, |
| 149 |
.flags = IORESOURCE_MEM, |
| 150 |
}; |
| 151 |
|
| 152 |
static struct platform_device gpr_mtd_device = { |
| 153 |
.name = "physmap-flash", |
| 154 |
.dev = { |
| 155 |
.platform_data = &gpr_flash_data, |
| 156 |
}, |
| 157 |
.num_resources = 1, |
| 158 |
.resource = &gpr_mtd_resource, |
| 159 |
}; |
| 160 |
|
| 161 |
/* |
| 162 |
* LEDs |
| 163 |
*/ |
| 164 |
static const struct gpio_led gpr_gpio_leds[] = { |
| 165 |
{ /* green */ |
| 166 |
.name = "gpr:green", |
| 167 |
.gpio = 4, |
| 168 |
.active_low = 1, |
| 169 |
}, |
| 170 |
{ /* red */ |
| 171 |
.name = "gpr:red", |
| 172 |
.gpio = 5, |
| 173 |
.active_low = 1, |
| 174 |
} |
| 175 |
}; |
| 176 |
|
| 177 |
static struct gpio_led_platform_data gpr_led_data = { |
| 178 |
.num_leds = ARRAY_SIZE(gpr_gpio_leds), |
| 179 |
.leds = gpr_gpio_leds, |
| 180 |
}; |
| 181 |
|
| 182 |
static struct platform_device gpr_led_devices = { |
| 183 |
.name = "leds-gpio", |
| 184 |
.id = -1, |
| 185 |
.dev = { |
| 186 |
.platform_data = &gpr_led_data, |
| 187 |
} |
| 188 |
}; |
| 189 |
|
| 190 |
/* |
| 191 |
* I2C |
| 192 |
*/ |
| 193 |
static struct gpiod_lookup_table gpr_i2c_gpiod_table = { |
| 194 |
.dev_id = "i2c-gpio", |
| 195 |
.table = { |
| 196 |
/* |
| 197 |
* This should be on "GPIO2" which has base at 200 so |
| 198 |
* the global numbers 209 and 210 should correspond to |
| 199 |
* local offsets 9 and 10. |
| 200 |
*/ |
| 201 |
GPIO_LOOKUP_IDX("alchemy-gpio2", 9, NULL, 0, |
| 202 |
GPIO_ACTIVE_HIGH), |
| 203 |
GPIO_LOOKUP_IDX("alchemy-gpio2", 10, NULL, 1, |
| 204 |
GPIO_ACTIVE_HIGH), |
| 205 |
}, |
| 206 |
}; |
| 207 |
|
| 208 |
static struct i2c_gpio_platform_data gpr_i2c_data = { |
| 209 |
/* |
| 210 |
* The open drain mode is hardwired somewhere or an electrical |
| 211 |
* property of the alchemy GPIO controller. |
| 212 |
*/ |
| 213 |
.sda_is_open_drain = 1, |
| 214 |
.scl_is_open_drain = 1, |
| 215 |
.udelay = 2, /* ~100 kHz */ |
| 216 |
.timeout = HZ, |
| 217 |
}; |
| 218 |
|
| 219 |
static struct platform_device gpr_i2c_device = { |
| 220 |
.name = "i2c-gpio", |
| 221 |
.id = -1, |
| 222 |
.dev.platform_data = &gpr_i2c_data, |
| 223 |
}; |
| 224 |
|
| 225 |
static struct i2c_board_info gpr_i2c_info[] __initdata = { |
| 226 |
{ |
| 227 |
I2C_BOARD_INFO("lm83", 0x18), |
| 228 |
} |
| 229 |
}; |
| 230 |
|
| 231 |
|
| 232 |
|
| 233 |
static struct resource alchemy_pci_host_res[] = { |
| 234 |
[0] = { |
| 235 |
.start = AU1500_PCI_PHYS_ADDR, |
| 236 |
.end = AU1500_PCI_PHYS_ADDR + 0xfff, |
| 237 |
.flags = IORESOURCE_MEM, |
| 238 |
}, |
| 239 |
}; |
| 240 |
|
| 241 |
static int gpr_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin) |
| 242 |
{ |
| 243 |
if ((slot == 0) && (pin == 1)) |
| 244 |
return AU1550_PCI_INTA; |
| 245 |
else if ((slot == 0) && (pin == 2)) |
| 246 |
return AU1550_PCI_INTB; |
| 247 |
|
| 248 |
return 0xff; |
| 249 |
} |
| 250 |
|
| 251 |
static struct alchemy_pci_platdata gpr_pci_pd = { |
| 252 |
.board_map_irq = gpr_map_pci_irq, |
| 253 |
.pci_cfg_set = PCI_CONFIG_AEN | PCI_CONFIG_R2H | PCI_CONFIG_R1H | |
| 254 |
PCI_CONFIG_CH | |
| 255 |
#if defined(__MIPSEB__) |
| 256 |
PCI_CONFIG_SIC_HWA_DAT | PCI_CONFIG_SM, |
| 257 |
#else |
| 258 |
0, |
| 259 |
#endif |
| 260 |
}; |
| 261 |
|
| 262 |
static struct platform_device gpr_pci_host_dev = { |
| 263 |
.dev.platform_data = &gpr_pci_pd, |
| 264 |
.name = "alchemy-pci", |
| 265 |
.id = 0, |
| 266 |
.num_resources = ARRAY_SIZE(alchemy_pci_host_res), |
| 267 |
.resource = alchemy_pci_host_res, |
| 268 |
}; |
| 269 |
|
| 270 |
static struct platform_device *gpr_devices[] __initdata = { |
| 271 |
&gpr_wdt_device, |
| 272 |
&gpr_mtd_device, |
| 273 |
&gpr_i2c_device, |
| 274 |
&gpr_led_devices, |
| 275 |
}; |
| 276 |
|
| 277 |
static int __init gpr_pci_init(void) |
| 278 |
{ |
| 279 |
return platform_device_register(&gpr_pci_host_dev); |
| 280 |
} |
| 281 |
/* must be arch_initcall; MIPS PCI scans busses in a subsys_initcall */ |
| 282 |
arch_initcall(gpr_pci_init); |
| 283 |
|
| 284 |
|
| 285 |
static int __init gpr_dev_init(void) |
| 286 |
{ |
| 287 |
gpiod_add_lookup_table(&gpr_i2c_gpiod_table); |
| 288 |
i2c_register_board_info(0, gpr_i2c_info, ARRAY_SIZE(gpr_i2c_info)); |
| 289 |
|
| 290 |
return platform_add_devices(gpr_devices, ARRAY_SIZE(gpr_devices)); |
| 291 |
} |
| 292 |
device_initcall(gpr_dev_init); |