| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later |
| 2 |
/* |
| 3 |
* BRIEF MODULE DESCRIPTION |
| 4 |
* MyCable XXS1500 board support |
| 5 |
* |
| 6 |
* Copyright 2003, 2008 MontaVista Software Inc. |
| 7 |
* Author: MontaVista Software, Inc. <[email protected]> |
| 8 |
*/ |
| 9 |
|
| 10 |
#include <linux/kernel.h> |
| 11 |
#include <linux/init.h> |
| 12 |
#include <linux/interrupt.h> |
| 13 |
#include <linux/platform_device.h> |
| 14 |
#include <linux/gpio.h> |
| 15 |
#include <linux/delay.h> |
| 16 |
#include <linux/pm.h> |
| 17 |
#include <asm/bootinfo.h> |
| 18 |
#include <asm/reboot.h> |
| 19 |
#include <asm/setup.h> |
| 20 |
#include <asm/mach-au1x00/au1000.h> |
| 21 |
#include <asm/mach-au1x00/gpio-au1000.h> |
| 22 |
#include <prom.h> |
| 23 |
|
| 24 |
const char *get_system_type(void) |
| 25 |
{ |
| 26 |
return "XXS1500"; |
| 27 |
} |
| 28 |
|
| 29 |
void prom_putchar(char c) |
| 30 |
{ |
| 31 |
alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c); |
| 32 |
} |
| 33 |
|
| 34 |
static void xxs1500_reset(char *c) |
| 35 |
{ |
| 36 |
/* Jump to the reset vector */ |
| 37 |
__asm__ __volatile__("jr\t%0" : : "r"(0xbfc00000)); |
| 38 |
} |
| 39 |
|
| 40 |
static void xxs1500_power_off(void) |
| 41 |
{ |
| 42 |
while (1) |
| 43 |
asm volatile ( |
| 44 |
" .set mips32 \n" |
| 45 |
" wait \n" |
| 46 |
" .set mips0 \n"); |
| 47 |
} |
| 48 |
|
| 49 |
void __init board_setup(void) |
| 50 |
{ |
| 51 |
u32 pin_func; |
| 52 |
|
| 53 |
pm_power_off = xxs1500_power_off; |
| 54 |
_machine_halt = xxs1500_power_off; |
| 55 |
_machine_restart = xxs1500_reset; |
| 56 |
|
| 57 |
alchemy_gpio1_input_enable(); |
| 58 |
alchemy_gpio2_enable(); |
| 59 |
|
| 60 |
/* Set multiple use pins (UART3/GPIO) to UART (it's used as UART too) */ |
| 61 |
pin_func = alchemy_rdsys(AU1000_SYS_PINFUNC) & ~SYS_PF_UR3; |
| 62 |
pin_func |= SYS_PF_UR3; |
| 63 |
alchemy_wrsys(pin_func, AU1000_SYS_PINFUNC); |
| 64 |
|
| 65 |
/* Enable UART */ |
| 66 |
alchemy_uart_enable(AU1000_UART3_PHYS_ADDR); |
| 67 |
/* Enable DTR (MCR bit 0) = USB power up */ |
| 68 |
__raw_writel(1, (void __iomem *)KSEG1ADDR(AU1000_UART3_PHYS_ADDR + 0x18)); |
| 69 |
wmb(); |
| 70 |
} |
| 71 |
|
| 72 |
/******************************************************************************/ |
| 73 |
|
| 74 |
static struct resource xxs1500_pcmcia_res[] = { |
| 75 |
{ |
| 76 |
.name = "pcmcia-io", |
| 77 |
.flags = IORESOURCE_MEM, |
| 78 |
.start = AU1000_PCMCIA_IO_PHYS_ADDR, |
| 79 |
.end = AU1000_PCMCIA_IO_PHYS_ADDR + 0x000400000 - 1, |
| 80 |
}, |
| 81 |
{ |
| 82 |
.name = "pcmcia-attr", |
| 83 |
.flags = IORESOURCE_MEM, |
| 84 |
.start = AU1000_PCMCIA_ATTR_PHYS_ADDR, |
| 85 |
.end = AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, |
| 86 |
}, |
| 87 |
{ |
| 88 |
.name = "pcmcia-mem", |
| 89 |
.flags = IORESOURCE_MEM, |
| 90 |
.start = AU1000_PCMCIA_MEM_PHYS_ADDR, |
| 91 |
.end = AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, |
| 92 |
}, |
| 93 |
}; |
| 94 |
|
| 95 |
static struct platform_device xxs1500_pcmcia_dev = { |
| 96 |
.name = "xxs1500_pcmcia", |
| 97 |
.id = -1, |
| 98 |
.num_resources = ARRAY_SIZE(xxs1500_pcmcia_res), |
| 99 |
.resource = xxs1500_pcmcia_res, |
| 100 |
}; |
| 101 |
|
| 102 |
static struct platform_device *xxs1500_devs[] __initdata = { |
| 103 |
&xxs1500_pcmcia_dev, |
| 104 |
}; |
| 105 |
|
| 106 |
static int __init xxs1500_dev_init(void) |
| 107 |
{ |
| 108 |
irq_set_irq_type(AU1500_GPIO204_INT, IRQ_TYPE_LEVEL_HIGH); |
| 109 |
irq_set_irq_type(AU1500_GPIO201_INT, IRQ_TYPE_LEVEL_LOW); |
| 110 |
irq_set_irq_type(AU1500_GPIO202_INT, IRQ_TYPE_LEVEL_LOW); |
| 111 |
irq_set_irq_type(AU1500_GPIO203_INT, IRQ_TYPE_LEVEL_LOW); |
| 112 |
irq_set_irq_type(AU1500_GPIO205_INT, IRQ_TYPE_LEVEL_LOW); |
| 113 |
irq_set_irq_type(AU1500_GPIO207_INT, IRQ_TYPE_LEVEL_LOW); |
| 114 |
|
| 115 |
irq_set_irq_type(AU1500_GPIO0_INT, IRQ_TYPE_LEVEL_LOW); |
| 116 |
irq_set_irq_type(AU1500_GPIO1_INT, IRQ_TYPE_LEVEL_LOW); |
| 117 |
irq_set_irq_type(AU1500_GPIO2_INT, IRQ_TYPE_LEVEL_LOW); |
| 118 |
irq_set_irq_type(AU1500_GPIO3_INT, IRQ_TYPE_LEVEL_LOW); |
| 119 |
irq_set_irq_type(AU1500_GPIO4_INT, IRQ_TYPE_LEVEL_LOW); /* CF irq */ |
| 120 |
irq_set_irq_type(AU1500_GPIO5_INT, IRQ_TYPE_LEVEL_LOW); |
| 121 |
|
| 122 |
return platform_add_devices(xxs1500_devs, |
| 123 |
ARRAY_SIZE(xxs1500_devs)); |
| 124 |
} |
| 125 |
device_initcall(xxs1500_dev_init); |