| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later |
| 2 |
/* |
| 3 |
* DBAu1200/PBAu1200 board platform device registration |
| 4 |
* |
| 5 |
* Copyright (C) 2008-2011 Manuel Lauss |
| 6 |
*/ |
| 7 |
|
| 8 |
#include <linux/clk.h> |
| 9 |
#include <linux/dma-mapping.h> |
| 10 |
#include <linux/gpio.h> |
| 11 |
#include <linux/i2c.h> |
| 12 |
#include <linux/init.h> |
| 13 |
#include <linux/interrupt.h> |
| 14 |
#include <linux/io.h> |
| 15 |
#include <linux/leds.h> |
| 16 |
#include <linux/mmc/host.h> |
| 17 |
#include <linux/mtd/mtd.h> |
| 18 |
#include <linux/mtd/platnand.h> |
| 19 |
#include <linux/platform_device.h> |
| 20 |
#include <linux/serial_8250.h> |
| 21 |
#include <linux/spi/spi.h> |
| 22 |
#include <linux/spi/flash.h> |
| 23 |
#include <linux/smc91x.h> |
| 24 |
#include <linux/ata_platform.h> |
| 25 |
#include <asm/mach-au1x00/au1000.h> |
| 26 |
#include <asm/mach-au1x00/au1100_mmc.h> |
| 27 |
#include <asm/mach-au1x00/au1xxx_dbdma.h> |
| 28 |
#include <asm/mach-au1x00/au1xxx_psc.h> |
| 29 |
#include <asm/mach-au1x00/au1200fb.h> |
| 30 |
#include <asm/mach-au1x00/au1550_spi.h> |
| 31 |
#include <asm/mach-db1x00/bcsr.h> |
| 32 |
|
| 33 |
#include "platform.h" |
| 34 |
|
| 35 |
#define BCSR_INT_IDE 0x0001 |
| 36 |
#define BCSR_INT_ETH 0x0002 |
| 37 |
#define BCSR_INT_PC0 0x0004 |
| 38 |
#define BCSR_INT_PC0STSCHG 0x0008 |
| 39 |
#define BCSR_INT_PC1 0x0010 |
| 40 |
#define BCSR_INT_PC1STSCHG 0x0020 |
| 41 |
#define BCSR_INT_DC 0x0040 |
| 42 |
#define BCSR_INT_FLASHBUSY 0x0080 |
| 43 |
#define BCSR_INT_PC0INSERT 0x0100 |
| 44 |
#define BCSR_INT_PC0EJECT 0x0200 |
| 45 |
#define BCSR_INT_PC1INSERT 0x0400 |
| 46 |
#define BCSR_INT_PC1EJECT 0x0800 |
| 47 |
#define BCSR_INT_SD0INSERT 0x1000 |
| 48 |
#define BCSR_INT_SD0EJECT 0x2000 |
| 49 |
#define BCSR_INT_SD1INSERT 0x4000 |
| 50 |
#define BCSR_INT_SD1EJECT 0x8000 |
| 51 |
|
| 52 |
#define DB1200_IDE_PHYS_ADDR 0x18800000 |
| 53 |
#define DB1200_IDE_REG_SHIFT 5 |
| 54 |
#define DB1200_IDE_PHYS_LEN (16 << DB1200_IDE_REG_SHIFT) |
| 55 |
#define DB1200_ETH_PHYS_ADDR 0x19000300 |
| 56 |
#define DB1200_NAND_PHYS_ADDR 0x20000000 |
| 57 |
|
| 58 |
#define PB1200_IDE_PHYS_ADDR 0x0C800000 |
| 59 |
#define PB1200_ETH_PHYS_ADDR 0x0D000300 |
| 60 |
#define PB1200_NAND_PHYS_ADDR 0x1C000000 |
| 61 |
|
| 62 |
#define DB1200_INT_BEGIN (AU1000_MAX_INTR + 1) |
| 63 |
#define DB1200_IDE_INT (DB1200_INT_BEGIN + 0) |
| 64 |
#define DB1200_ETH_INT (DB1200_INT_BEGIN + 1) |
| 65 |
#define DB1200_PC0_INT (DB1200_INT_BEGIN + 2) |
| 66 |
#define DB1200_PC0_STSCHG_INT (DB1200_INT_BEGIN + 3) |
| 67 |
#define DB1200_PC1_INT (DB1200_INT_BEGIN + 4) |
| 68 |
#define DB1200_PC1_STSCHG_INT (DB1200_INT_BEGIN + 5) |
| 69 |
#define DB1200_DC_INT (DB1200_INT_BEGIN + 6) |
| 70 |
#define DB1200_FLASHBUSY_INT (DB1200_INT_BEGIN + 7) |
| 71 |
#define DB1200_PC0_INSERT_INT (DB1200_INT_BEGIN + 8) |
| 72 |
#define DB1200_PC0_EJECT_INT (DB1200_INT_BEGIN + 9) |
| 73 |
#define DB1200_PC1_INSERT_INT (DB1200_INT_BEGIN + 10) |
| 74 |
#define DB1200_PC1_EJECT_INT (DB1200_INT_BEGIN + 11) |
| 75 |
#define DB1200_SD0_INSERT_INT (DB1200_INT_BEGIN + 12) |
| 76 |
#define DB1200_SD0_EJECT_INT (DB1200_INT_BEGIN + 13) |
| 77 |
#define PB1200_SD1_INSERT_INT (DB1200_INT_BEGIN + 14) |
| 78 |
#define PB1200_SD1_EJECT_INT (DB1200_INT_BEGIN + 15) |
| 79 |
#define DB1200_INT_END (DB1200_INT_BEGIN + 15) |
| 80 |
|
| 81 |
const char *get_system_type(void); |
| 82 |
|
| 83 |
static int __init db1200_detect_board(void) |
| 84 |
{ |
| 85 |
int bid; |
| 86 |
|
| 87 |
/* try the DB1200 first */ |
| 88 |
bcsr_init(DB1200_BCSR_PHYS_ADDR, |
| 89 |
DB1200_BCSR_PHYS_ADDR + DB1200_BCSR_HEXLED_OFS); |
| 90 |
if (BCSR_WHOAMI_DB1200 == BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI))) { |
| 91 |
unsigned short t = bcsr_read(BCSR_HEXLEDS); |
| 92 |
bcsr_write(BCSR_HEXLEDS, ~t); |
| 93 |
if (bcsr_read(BCSR_HEXLEDS) != t) { |
| 94 |
bcsr_write(BCSR_HEXLEDS, t); |
| 95 |
return 0; |
| 96 |
} |
| 97 |
} |
| 98 |
|
| 99 |
/* okay, try the PB1200 then */ |
| 100 |
bcsr_init(PB1200_BCSR_PHYS_ADDR, |
| 101 |
PB1200_BCSR_PHYS_ADDR + PB1200_BCSR_HEXLED_OFS); |
| 102 |
bid = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI)); |
| 103 |
if ((bid == BCSR_WHOAMI_PB1200_DDR1) || |
| 104 |
(bid == BCSR_WHOAMI_PB1200_DDR2)) { |
| 105 |
unsigned short t = bcsr_read(BCSR_HEXLEDS); |
| 106 |
bcsr_write(BCSR_HEXLEDS, ~t); |
| 107 |
if (bcsr_read(BCSR_HEXLEDS) != t) { |
| 108 |
bcsr_write(BCSR_HEXLEDS, t); |
| 109 |
return 0; |
| 110 |
} |
| 111 |
} |
| 112 |
|
| 113 |
return 1; /* it's neither */ |
| 114 |
} |
| 115 |
|
| 116 |
int __init db1200_board_setup(void) |
| 117 |
{ |
| 118 |
unsigned short whoami; |
| 119 |
|
| 120 |
if (db1200_detect_board()) |
| 121 |
return -ENODEV; |
| 122 |
|
| 123 |
whoami = bcsr_read(BCSR_WHOAMI); |
| 124 |
switch (BCSR_WHOAMI_BOARD(whoami)) { |
| 125 |
case BCSR_WHOAMI_PB1200_DDR1: |
| 126 |
case BCSR_WHOAMI_PB1200_DDR2: |
| 127 |
case BCSR_WHOAMI_DB1200: |
| 128 |
break; |
| 129 |
default: |
| 130 |
return -ENODEV; |
| 131 |
} |
| 132 |
|
| 133 |
printk(KERN_INFO "Alchemy/AMD/RMI %s Board, CPLD Rev %d" |
| 134 |
" Board-ID %d Daughtercard ID %d\n", get_system_type(), |
| 135 |
(whoami >> 4) & 0xf, (whoami >> 8) & 0xf, whoami & 0xf); |
| 136 |
|
| 137 |
return 0; |
| 138 |
} |
| 139 |
|
| 140 |
/******************************************************************************/ |
| 141 |
|
| 142 |
static u64 au1200_all_dmamask = DMA_BIT_MASK(32); |
| 143 |
|
| 144 |
static struct mtd_partition db1200_spiflash_parts[] = { |
| 145 |
{ |
| 146 |
.name = "spi_flash", |
| 147 |
.offset = 0, |
| 148 |
.size = MTDPART_SIZ_FULL, |
| 149 |
}, |
| 150 |
}; |
| 151 |
|
| 152 |
static struct flash_platform_data db1200_spiflash_data = { |
| 153 |
.name = "s25fl001", |
| 154 |
.parts = db1200_spiflash_parts, |
| 155 |
.nr_parts = ARRAY_SIZE(db1200_spiflash_parts), |
| 156 |
.type = "m25p10", |
| 157 |
}; |
| 158 |
|
| 159 |
static struct spi_board_info db1200_spi_devs[] __initdata = { |
| 160 |
{ |
| 161 |
/* TI TMP121AIDBVR temp sensor */ |
| 162 |
.modalias = "tmp121", |
| 163 |
.max_speed_hz = 2000000, |
| 164 |
.bus_num = 0, |
| 165 |
.chip_select = 0, |
| 166 |
.mode = 0, |
| 167 |
}, |
| 168 |
{ |
| 169 |
/* Spansion S25FL001D0FMA SPI flash */ |
| 170 |
.modalias = "m25p80", |
| 171 |
.max_speed_hz = 50000000, |
| 172 |
.bus_num = 0, |
| 173 |
.chip_select = 1, |
| 174 |
.mode = 0, |
| 175 |
.platform_data = &db1200_spiflash_data, |
| 176 |
}, |
| 177 |
}; |
| 178 |
|
| 179 |
static struct i2c_board_info db1200_i2c_devs[] __initdata = { |
| 180 |
{ I2C_BOARD_INFO("24c04", 0x52), }, /* AT24C04-10 I2C eeprom */ |
| 181 |
{ I2C_BOARD_INFO("ne1619", 0x2d), }, /* adm1025-compat hwmon */ |
| 182 |
{ I2C_BOARD_INFO("wm8731", 0x1b), }, /* I2S audio codec WM8731 */ |
| 183 |
}; |
| 184 |
|
| 185 |
/**********************************************************************/ |
| 186 |
|
| 187 |
static void au1200_nand_cmd_ctrl(struct nand_chip *this, int cmd, |
| 188 |
unsigned int ctrl) |
| 189 |
{ |
| 190 |
unsigned long ioaddr = (unsigned long)this->legacy.IO_ADDR_W; |
| 191 |
|
| 192 |
ioaddr &= 0xffffff00; |
| 193 |
|
| 194 |
if (ctrl & NAND_CLE) { |
| 195 |
ioaddr += MEM_STNAND_CMD; |
| 196 |
} else if (ctrl & NAND_ALE) { |
| 197 |
ioaddr += MEM_STNAND_ADDR; |
| 198 |
} else { |
| 199 |
/* assume we want to r/w real data by default */ |
| 200 |
ioaddr += MEM_STNAND_DATA; |
| 201 |
} |
| 202 |
this->legacy.IO_ADDR_R = this->legacy.IO_ADDR_W = (void __iomem *)ioaddr; |
| 203 |
if (cmd != NAND_CMD_NONE) { |
| 204 |
__raw_writeb(cmd, this->legacy.IO_ADDR_W); |
| 205 |
wmb(); |
| 206 |
} |
| 207 |
} |
| 208 |
|
| 209 |
static int au1200_nand_device_ready(struct nand_chip *this) |
| 210 |
{ |
| 211 |
return alchemy_rdsmem(AU1000_MEM_STSTAT) & 1; |
| 212 |
} |
| 213 |
|
| 214 |
static struct mtd_partition db1200_nand_parts[] = { |
| 215 |
{ |
| 216 |
.name = "NAND FS 0", |
| 217 |
.offset = 0, |
| 218 |
.size = 8 * 1024 * 1024, |
| 219 |
}, |
| 220 |
{ |
| 221 |
.name = "NAND FS 1", |
| 222 |
.offset = MTDPART_OFS_APPEND, |
| 223 |
.size = MTDPART_SIZ_FULL |
| 224 |
}, |
| 225 |
}; |
| 226 |
|
| 227 |
struct platform_nand_data db1200_nand_platdata = { |
| 228 |
.chip = { |
| 229 |
.nr_chips = 1, |
| 230 |
.chip_offset = 0, |
| 231 |
.nr_partitions = ARRAY_SIZE(db1200_nand_parts), |
| 232 |
.partitions = db1200_nand_parts, |
| 233 |
.chip_delay = 20, |
| 234 |
}, |
| 235 |
.ctrl = { |
| 236 |
.dev_ready = au1200_nand_device_ready, |
| 237 |
.cmd_ctrl = au1200_nand_cmd_ctrl, |
| 238 |
}, |
| 239 |
}; |
| 240 |
|
| 241 |
static struct resource db1200_nand_res[] = { |
| 242 |
[0] = { |
| 243 |
.start = DB1200_NAND_PHYS_ADDR, |
| 244 |
.end = DB1200_NAND_PHYS_ADDR + 0xff, |
| 245 |
.flags = IORESOURCE_MEM, |
| 246 |
}, |
| 247 |
}; |
| 248 |
|
| 249 |
static struct platform_device db1200_nand_dev = { |
| 250 |
.name = "gen_nand", |
| 251 |
.num_resources = ARRAY_SIZE(db1200_nand_res), |
| 252 |
.resource = db1200_nand_res, |
| 253 |
.id = -1, |
| 254 |
.dev = { |
| 255 |
.platform_data = &db1200_nand_platdata, |
| 256 |
} |
| 257 |
}; |
| 258 |
|
| 259 |
/**********************************************************************/ |
| 260 |
|
| 261 |
static struct smc91x_platdata db1200_eth_data = { |
| 262 |
.flags = SMC91X_NOWAIT | SMC91X_USE_16BIT, |
| 263 |
.leda = RPC_LED_100_10, |
| 264 |
.ledb = RPC_LED_TX_RX, |
| 265 |
}; |
| 266 |
|
| 267 |
static struct resource db1200_eth_res[] = { |
| 268 |
[0] = { |
| 269 |
.start = DB1200_ETH_PHYS_ADDR, |
| 270 |
.end = DB1200_ETH_PHYS_ADDR + 0xf, |
| 271 |
.flags = IORESOURCE_MEM, |
| 272 |
}, |
| 273 |
[1] = { |
| 274 |
.start = DB1200_ETH_INT, |
| 275 |
.end = DB1200_ETH_INT, |
| 276 |
.flags = IORESOURCE_IRQ, |
| 277 |
}, |
| 278 |
}; |
| 279 |
|
| 280 |
static struct platform_device db1200_eth_dev = { |
| 281 |
.dev = { |
| 282 |
.platform_data = &db1200_eth_data, |
| 283 |
}, |
| 284 |
.name = "smc91x", |
| 285 |
.id = -1, |
| 286 |
.num_resources = ARRAY_SIZE(db1200_eth_res), |
| 287 |
.resource = db1200_eth_res, |
| 288 |
}; |
| 289 |
|
| 290 |
/**********************************************************************/ |
| 291 |
|
| 292 |
static struct pata_platform_info db1200_ide_info = { |
| 293 |
.ioport_shift = DB1200_IDE_REG_SHIFT, |
| 294 |
}; |
| 295 |
|
| 296 |
#define IDE_ALT_START (14 << DB1200_IDE_REG_SHIFT) |
| 297 |
static struct resource db1200_ide_res[] = { |
| 298 |
[0] = { |
| 299 |
.start = DB1200_IDE_PHYS_ADDR, |
| 300 |
.end = DB1200_IDE_PHYS_ADDR + IDE_ALT_START - 1, |
| 301 |
.flags = IORESOURCE_MEM, |
| 302 |
}, |
| 303 |
[1] = { |
| 304 |
.start = DB1200_IDE_PHYS_ADDR + IDE_ALT_START, |
| 305 |
.end = DB1200_IDE_PHYS_ADDR + DB1200_IDE_PHYS_LEN - 1, |
| 306 |
.flags = IORESOURCE_MEM, |
| 307 |
}, |
| 308 |
[2] = { |
| 309 |
.start = DB1200_IDE_INT, |
| 310 |
.end = DB1200_IDE_INT, |
| 311 |
.flags = IORESOURCE_IRQ, |
| 312 |
}, |
| 313 |
}; |
| 314 |
|
| 315 |
static struct platform_device db1200_ide_dev = { |
| 316 |
.name = "pata_platform", |
| 317 |
.id = 0, |
| 318 |
.dev = { |
| 319 |
.dma_mask = &au1200_all_dmamask, |
| 320 |
.coherent_dma_mask = DMA_BIT_MASK(32), |
| 321 |
.platform_data = &db1200_ide_info, |
| 322 |
}, |
| 323 |
.num_resources = ARRAY_SIZE(db1200_ide_res), |
| 324 |
.resource = db1200_ide_res, |
| 325 |
}; |
| 326 |
|
| 327 |
/**********************************************************************/ |
| 328 |
|
| 329 |
#ifdef CONFIG_MMC_AU1X |
| 330 |
/* SD carddetects: they're supposed to be edge-triggered, but ack |
| 331 |
* doesn't seem to work (CPLD Rev 2). Instead, the screaming one |
| 332 |
* is disabled and its counterpart enabled. The 200ms timeout is |
| 333 |
* because the carddetect usually triggers twice, after debounce. |
| 334 |
*/ |
| 335 |
static irqreturn_t db1200_mmc_cd(int irq, void *ptr) |
| 336 |
{ |
| 337 |
disable_irq_nosync(irq); |
| 338 |
return IRQ_WAKE_THREAD; |
| 339 |
} |
| 340 |
|
| 341 |
static irqreturn_t db1200_mmc_cdfn(int irq, void *ptr) |
| 342 |
{ |
| 343 |
mmc_detect_change(ptr, msecs_to_jiffies(200)); |
| 344 |
|
| 345 |
msleep(100); /* debounce */ |
| 346 |
if (irq == DB1200_SD0_INSERT_INT) |
| 347 |
enable_irq(DB1200_SD0_EJECT_INT); |
| 348 |
else |
| 349 |
enable_irq(DB1200_SD0_INSERT_INT); |
| 350 |
|
| 351 |
return IRQ_HANDLED; |
| 352 |
} |
| 353 |
|
| 354 |
static int db1200_mmc_cd_setup(void *mmc_host, int en) |
| 355 |
{ |
| 356 |
int ret; |
| 357 |
|
| 358 |
if (en) { |
| 359 |
ret = request_threaded_irq(DB1200_SD0_INSERT_INT, db1200_mmc_cd, |
| 360 |
db1200_mmc_cdfn, 0, "sd_insert", mmc_host); |
| 361 |
if (ret) |
| 362 |
goto out; |
| 363 |
|
| 364 |
ret = request_threaded_irq(DB1200_SD0_EJECT_INT, db1200_mmc_cd, |
| 365 |
db1200_mmc_cdfn, 0, "sd_eject", mmc_host); |
| 366 |
if (ret) { |
| 367 |
free_irq(DB1200_SD0_INSERT_INT, mmc_host); |
| 368 |
goto out; |
| 369 |
} |
| 370 |
|
| 371 |
if (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD0INSERT) |
| 372 |
enable_irq(DB1200_SD0_EJECT_INT); |
| 373 |
else |
| 374 |
enable_irq(DB1200_SD0_INSERT_INT); |
| 375 |
|
| 376 |
} else { |
| 377 |
free_irq(DB1200_SD0_INSERT_INT, mmc_host); |
| 378 |
free_irq(DB1200_SD0_EJECT_INT, mmc_host); |
| 379 |
} |
| 380 |
ret = 0; |
| 381 |
out: |
| 382 |
return ret; |
| 383 |
} |
| 384 |
|
| 385 |
static void db1200_mmc_set_power(void *mmc_host, int state) |
| 386 |
{ |
| 387 |
if (state) { |
| 388 |
bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD0PWR); |
| 389 |
msleep(400); /* stabilization time */ |
| 390 |
} else |
| 391 |
bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD0PWR, 0); |
| 392 |
} |
| 393 |
|
| 394 |
static int db1200_mmc_card_readonly(void *mmc_host) |
| 395 |
{ |
| 396 |
return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD0WP) ? 1 : 0; |
| 397 |
} |
| 398 |
|
| 399 |
static int db1200_mmc_card_inserted(void *mmc_host) |
| 400 |
{ |
| 401 |
return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD0INSERT) ? 1 : 0; |
| 402 |
} |
| 403 |
|
| 404 |
static void db1200_mmcled_set(struct led_classdev *led, |
| 405 |
enum led_brightness brightness) |
| 406 |
{ |
| 407 |
if (brightness != LED_OFF) |
| 408 |
bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED0, 0); |
| 409 |
else |
| 410 |
bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED0); |
| 411 |
} |
| 412 |
|
| 413 |
static struct led_classdev db1200_mmc_led = { |
| 414 |
.brightness_set = db1200_mmcled_set, |
| 415 |
}; |
| 416 |
|
| 417 |
/* -- */ |
| 418 |
|
| 419 |
static irqreturn_t pb1200_mmc1_cd(int irq, void *ptr) |
| 420 |
{ |
| 421 |
disable_irq_nosync(irq); |
| 422 |
return IRQ_WAKE_THREAD; |
| 423 |
} |
| 424 |
|
| 425 |
static irqreturn_t pb1200_mmc1_cdfn(int irq, void *ptr) |
| 426 |
{ |
| 427 |
mmc_detect_change(ptr, msecs_to_jiffies(200)); |
| 428 |
|
| 429 |
msleep(100); /* debounce */ |
| 430 |
if (irq == PB1200_SD1_INSERT_INT) |
| 431 |
enable_irq(PB1200_SD1_EJECT_INT); |
| 432 |
else |
| 433 |
enable_irq(PB1200_SD1_INSERT_INT); |
| 434 |
|
| 435 |
return IRQ_HANDLED; |
| 436 |
} |
| 437 |
|
| 438 |
static int pb1200_mmc1_cd_setup(void *mmc_host, int en) |
| 439 |
{ |
| 440 |
int ret; |
| 441 |
|
| 442 |
if (en) { |
| 443 |
ret = request_threaded_irq(PB1200_SD1_INSERT_INT, pb1200_mmc1_cd, |
| 444 |
pb1200_mmc1_cdfn, 0, "sd1_insert", mmc_host); |
| 445 |
if (ret) |
| 446 |
goto out; |
| 447 |
|
| 448 |
ret = request_threaded_irq(PB1200_SD1_EJECT_INT, pb1200_mmc1_cd, |
| 449 |
pb1200_mmc1_cdfn, 0, "sd1_eject", mmc_host); |
| 450 |
if (ret) { |
| 451 |
free_irq(PB1200_SD1_INSERT_INT, mmc_host); |
| 452 |
goto out; |
| 453 |
} |
| 454 |
|
| 455 |
if (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD1INSERT) |
| 456 |
enable_irq(PB1200_SD1_EJECT_INT); |
| 457 |
else |
| 458 |
enable_irq(PB1200_SD1_INSERT_INT); |
| 459 |
|
| 460 |
} else { |
| 461 |
free_irq(PB1200_SD1_INSERT_INT, mmc_host); |
| 462 |
free_irq(PB1200_SD1_EJECT_INT, mmc_host); |
| 463 |
} |
| 464 |
ret = 0; |
| 465 |
out: |
| 466 |
return ret; |
| 467 |
} |
| 468 |
|
| 469 |
static void pb1200_mmc1led_set(struct led_classdev *led, |
| 470 |
enum led_brightness brightness) |
| 471 |
{ |
| 472 |
if (brightness != LED_OFF) |
| 473 |
bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED1, 0); |
| 474 |
else |
| 475 |
bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED1); |
| 476 |
} |
| 477 |
|
| 478 |
static struct led_classdev pb1200_mmc1_led = { |
| 479 |
.brightness_set = pb1200_mmc1led_set, |
| 480 |
}; |
| 481 |
|
| 482 |
static void pb1200_mmc1_set_power(void *mmc_host, int state) |
| 483 |
{ |
| 484 |
if (state) { |
| 485 |
bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD1PWR); |
| 486 |
msleep(400); /* stabilization time */ |
| 487 |
} else |
| 488 |
bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD1PWR, 0); |
| 489 |
} |
| 490 |
|
| 491 |
static int pb1200_mmc1_card_readonly(void *mmc_host) |
| 492 |
{ |
| 493 |
return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD1WP) ? 1 : 0; |
| 494 |
} |
| 495 |
|
| 496 |
static int pb1200_mmc1_card_inserted(void *mmc_host) |
| 497 |
{ |
| 498 |
return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD1INSERT) ? 1 : 0; |
| 499 |
} |
| 500 |
|
| 501 |
|
| 502 |
static struct au1xmmc_platform_data db1200_mmc_platdata[2] = { |
| 503 |
[0] = { |
| 504 |
.cd_setup = db1200_mmc_cd_setup, |
| 505 |
.set_power = db1200_mmc_set_power, |
| 506 |
.card_inserted = db1200_mmc_card_inserted, |
| 507 |
.card_readonly = db1200_mmc_card_readonly, |
| 508 |
.led = &db1200_mmc_led, |
| 509 |
}, |
| 510 |
[1] = { |
| 511 |
.cd_setup = pb1200_mmc1_cd_setup, |
| 512 |
.set_power = pb1200_mmc1_set_power, |
| 513 |
.card_inserted = pb1200_mmc1_card_inserted, |
| 514 |
.card_readonly = pb1200_mmc1_card_readonly, |
| 515 |
.led = &pb1200_mmc1_led, |
| 516 |
}, |
| 517 |
}; |
| 518 |
|
| 519 |
static struct resource au1200_mmc0_resources[] = { |
| 520 |
[0] = { |
| 521 |
.start = AU1100_SD0_PHYS_ADDR, |
| 522 |
.end = AU1100_SD0_PHYS_ADDR + 0xfff, |
| 523 |
.flags = IORESOURCE_MEM, |
| 524 |
}, |
| 525 |
[1] = { |
| 526 |
.start = AU1200_SD_INT, |
| 527 |
.end = AU1200_SD_INT, |
| 528 |
.flags = IORESOURCE_IRQ, |
| 529 |
}, |
| 530 |
[2] = { |
| 531 |
.start = AU1200_DSCR_CMD0_SDMS_TX0, |
| 532 |
.end = AU1200_DSCR_CMD0_SDMS_TX0, |
| 533 |
.flags = IORESOURCE_DMA, |
| 534 |
}, |
| 535 |
[3] = { |
| 536 |
.start = AU1200_DSCR_CMD0_SDMS_RX0, |
| 537 |
.end = AU1200_DSCR_CMD0_SDMS_RX0, |
| 538 |
.flags = IORESOURCE_DMA, |
| 539 |
} |
| 540 |
}; |
| 541 |
|
| 542 |
static struct platform_device db1200_mmc0_dev = { |
| 543 |
.name = "au1xxx-mmc", |
| 544 |
.id = 0, |
| 545 |
.dev = { |
| 546 |
.dma_mask = &au1200_all_dmamask, |
| 547 |
.coherent_dma_mask = DMA_BIT_MASK(32), |
| 548 |
.platform_data = &db1200_mmc_platdata[0], |
| 549 |
}, |
| 550 |
.num_resources = ARRAY_SIZE(au1200_mmc0_resources), |
| 551 |
.resource = au1200_mmc0_resources, |
| 552 |
}; |
| 553 |
|
| 554 |
static struct resource au1200_mmc1_res[] = { |
| 555 |
[0] = { |
| 556 |
.start = AU1100_SD1_PHYS_ADDR, |
| 557 |
.end = AU1100_SD1_PHYS_ADDR + 0xfff, |
| 558 |
.flags = IORESOURCE_MEM, |
| 559 |
}, |
| 560 |
[1] = { |
| 561 |
.start = AU1200_SD_INT, |
| 562 |
.end = AU1200_SD_INT, |
| 563 |
.flags = IORESOURCE_IRQ, |
| 564 |
}, |
| 565 |
[2] = { |
| 566 |
.start = AU1200_DSCR_CMD0_SDMS_TX1, |
| 567 |
.end = AU1200_DSCR_CMD0_SDMS_TX1, |
| 568 |
.flags = IORESOURCE_DMA, |
| 569 |
}, |
| 570 |
[3] = { |
| 571 |
.start = AU1200_DSCR_CMD0_SDMS_RX1, |
| 572 |
.end = AU1200_DSCR_CMD0_SDMS_RX1, |
| 573 |
.flags = IORESOURCE_DMA, |
| 574 |
} |
| 575 |
}; |
| 576 |
|
| 577 |
static struct platform_device pb1200_mmc1_dev = { |
| 578 |
.name = "au1xxx-mmc", |
| 579 |
.id = 1, |
| 580 |
.dev = { |
| 581 |
.dma_mask = &au1200_all_dmamask, |
| 582 |
.coherent_dma_mask = DMA_BIT_MASK(32), |
| 583 |
.platform_data = &db1200_mmc_platdata[1], |
| 584 |
}, |
| 585 |
.num_resources = ARRAY_SIZE(au1200_mmc1_res), |
| 586 |
.resource = au1200_mmc1_res, |
| 587 |
}; |
| 588 |
#endif /* CONFIG_MMC_AU1X */ |
| 589 |
|
| 590 |
/**********************************************************************/ |
| 591 |
|
| 592 |
static int db1200fb_panel_index(void) |
| 593 |
{ |
| 594 |
return (bcsr_read(BCSR_SWITCHES) >> 8) & 0x0f; |
| 595 |
} |
| 596 |
|
| 597 |
static int db1200fb_panel_init(void) |
| 598 |
{ |
| 599 |
/* Apply power */ |
| 600 |
bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | |
| 601 |
BCSR_BOARD_LCDBL); |
| 602 |
return 0; |
| 603 |
} |
| 604 |
|
| 605 |
static int db1200fb_panel_shutdown(void) |
| 606 |
{ |
| 607 |
/* Remove power */ |
| 608 |
bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | |
| 609 |
BCSR_BOARD_LCDBL, 0); |
| 610 |
return 0; |
| 611 |
} |
| 612 |
|
| 613 |
static struct au1200fb_platdata db1200fb_pd = { |
| 614 |
.panel_index = db1200fb_panel_index, |
| 615 |
.panel_init = db1200fb_panel_init, |
| 616 |
.panel_shutdown = db1200fb_panel_shutdown, |
| 617 |
}; |
| 618 |
|
| 619 |
static struct resource au1200_lcd_res[] = { |
| 620 |
[0] = { |
| 621 |
.start = AU1200_LCD_PHYS_ADDR, |
| 622 |
.end = AU1200_LCD_PHYS_ADDR + 0x800 - 1, |
| 623 |
.flags = IORESOURCE_MEM, |
| 624 |
}, |
| 625 |
[1] = { |
| 626 |
.start = AU1200_LCD_INT, |
| 627 |
.end = AU1200_LCD_INT, |
| 628 |
.flags = IORESOURCE_IRQ, |
| 629 |
} |
| 630 |
}; |
| 631 |
|
| 632 |
static struct platform_device au1200_lcd_dev = { |
| 633 |
.name = "au1200-lcd", |
| 634 |
.id = 0, |
| 635 |
.dev = { |
| 636 |
.dma_mask = &au1200_all_dmamask, |
| 637 |
.coherent_dma_mask = DMA_BIT_MASK(32), |
| 638 |
.platform_data = &db1200fb_pd, |
| 639 |
}, |
| 640 |
.num_resources = ARRAY_SIZE(au1200_lcd_res), |
| 641 |
.resource = au1200_lcd_res, |
| 642 |
}; |
| 643 |
|
| 644 |
/**********************************************************************/ |
| 645 |
|
| 646 |
static struct resource au1200_psc0_res[] = { |
| 647 |
[0] = { |
| 648 |
.start = AU1550_PSC0_PHYS_ADDR, |
| 649 |
.end = AU1550_PSC0_PHYS_ADDR + 0xfff, |
| 650 |
.flags = IORESOURCE_MEM, |
| 651 |
}, |
| 652 |
[1] = { |
| 653 |
.start = AU1200_PSC0_INT, |
| 654 |
.end = AU1200_PSC0_INT, |
| 655 |
.flags = IORESOURCE_IRQ, |
| 656 |
}, |
| 657 |
[2] = { |
| 658 |
.start = AU1200_DSCR_CMD0_PSC0_TX, |
| 659 |
.end = AU1200_DSCR_CMD0_PSC0_TX, |
| 660 |
.flags = IORESOURCE_DMA, |
| 661 |
}, |
| 662 |
[3] = { |
| 663 |
.start = AU1200_DSCR_CMD0_PSC0_RX, |
| 664 |
.end = AU1200_DSCR_CMD0_PSC0_RX, |
| 665 |
.flags = IORESOURCE_DMA, |
| 666 |
}, |
| 667 |
}; |
| 668 |
|
| 669 |
static struct platform_device db1200_i2c_dev = { |
| 670 |
.name = "au1xpsc_smbus", |
| 671 |
.id = 0, /* bus number */ |
| 672 |
.num_resources = ARRAY_SIZE(au1200_psc0_res), |
| 673 |
.resource = au1200_psc0_res, |
| 674 |
}; |
| 675 |
|
| 676 |
static void db1200_spi_cs_en(struct au1550_spi_info *spi, int cs, int pol) |
| 677 |
{ |
| 678 |
if (cs) |
| 679 |
bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_SPISEL); |
| 680 |
else |
| 681 |
bcsr_mod(BCSR_RESETS, BCSR_RESETS_SPISEL, 0); |
| 682 |
} |
| 683 |
|
| 684 |
static struct au1550_spi_info db1200_spi_platdata = { |
| 685 |
.mainclk_hz = 50000000, /* PSC0 clock */ |
| 686 |
.num_chipselect = 2, |
| 687 |
.activate_cs = db1200_spi_cs_en, |
| 688 |
}; |
| 689 |
|
| 690 |
static struct platform_device db1200_spi_dev = { |
| 691 |
.dev = { |
| 692 |
.dma_mask = &au1200_all_dmamask, |
| 693 |
.coherent_dma_mask = DMA_BIT_MASK(32), |
| 694 |
.platform_data = &db1200_spi_platdata, |
| 695 |
}, |
| 696 |
.name = "au1550-spi", |
| 697 |
.id = 0, /* bus number */ |
| 698 |
.num_resources = ARRAY_SIZE(au1200_psc0_res), |
| 699 |
.resource = au1200_psc0_res, |
| 700 |
}; |
| 701 |
|
| 702 |
static struct resource au1200_psc1_res[] = { |
| 703 |
[0] = { |
| 704 |
.start = AU1550_PSC1_PHYS_ADDR, |
| 705 |
.end = AU1550_PSC1_PHYS_ADDR + 0xfff, |
| 706 |
.flags = IORESOURCE_MEM, |
| 707 |
}, |
| 708 |
[1] = { |
| 709 |
.start = AU1200_PSC1_INT, |
| 710 |
.end = AU1200_PSC1_INT, |
| 711 |
.flags = IORESOURCE_IRQ, |
| 712 |
}, |
| 713 |
[2] = { |
| 714 |
.start = AU1200_DSCR_CMD0_PSC1_TX, |
| 715 |
.end = AU1200_DSCR_CMD0_PSC1_TX, |
| 716 |
.flags = IORESOURCE_DMA, |
| 717 |
}, |
| 718 |
[3] = { |
| 719 |
.start = AU1200_DSCR_CMD0_PSC1_RX, |
| 720 |
.end = AU1200_DSCR_CMD0_PSC1_RX, |
| 721 |
.flags = IORESOURCE_DMA, |
| 722 |
}, |
| 723 |
}; |
| 724 |
|
| 725 |
/* AC97 or I2S device */ |
| 726 |
static struct platform_device db1200_audio_dev = { |
| 727 |
/* name assigned later based on switch setting */ |
| 728 |
.id = 1, /* PSC ID */ |
| 729 |
.num_resources = ARRAY_SIZE(au1200_psc1_res), |
| 730 |
.resource = au1200_psc1_res, |
| 731 |
}; |
| 732 |
|
| 733 |
/* DB1200 ASoC card device */ |
| 734 |
static struct platform_device db1200_sound_dev = { |
| 735 |
/* name assigned later based on switch setting */ |
| 736 |
.id = 1, /* PSC ID */ |
| 737 |
.dev = { |
| 738 |
.dma_mask = &au1200_all_dmamask, |
| 739 |
.coherent_dma_mask = DMA_BIT_MASK(32), |
| 740 |
}, |
| 741 |
}; |
| 742 |
|
| 743 |
static struct platform_device db1200_stac_dev = { |
| 744 |
.name = "ac97-codec", |
| 745 |
.id = 1, /* on PSC1 */ |
| 746 |
}; |
| 747 |
|
| 748 |
static struct platform_device db1200_audiodma_dev = { |
| 749 |
.name = "au1xpsc-pcm", |
| 750 |
.id = 1, /* PSC ID */ |
| 751 |
}; |
| 752 |
|
| 753 |
static struct platform_device *db1200_devs[] __initdata = { |
| 754 |
NULL, /* PSC0, selected by S6.8 */ |
| 755 |
&db1200_ide_dev, |
| 756 |
#ifdef CONFIG_MMC_AU1X |
| 757 |
&db1200_mmc0_dev, |
| 758 |
#endif |
| 759 |
&au1200_lcd_dev, |
| 760 |
&db1200_eth_dev, |
| 761 |
&db1200_nand_dev, |
| 762 |
&db1200_audiodma_dev, |
| 763 |
&db1200_audio_dev, |
| 764 |
&db1200_stac_dev, |
| 765 |
&db1200_sound_dev, |
| 766 |
}; |
| 767 |
|
| 768 |
static struct platform_device *pb1200_devs[] __initdata = { |
| 769 |
#ifdef CONFIG_MMC_AU1X |
| 770 |
&pb1200_mmc1_dev, |
| 771 |
#endif |
| 772 |
}; |
| 773 |
|
| 774 |
/* Some peripheral base addresses differ on the PB1200 */ |
| 775 |
static int __init pb1200_res_fixup(void) |
| 776 |
{ |
| 777 |
/* CPLD Revs earlier than 4 cause problems */ |
| 778 |
if (BCSR_WHOAMI_CPLD(bcsr_read(BCSR_WHOAMI)) <= 3) { |
| 779 |
printk(KERN_ERR "WARNING!!!\n"); |
| 780 |
printk(KERN_ERR "WARNING!!!\n"); |
| 781 |
printk(KERN_ERR "PB1200 must be at CPLD rev 4. Please have\n"); |
| 782 |
printk(KERN_ERR "the board updated to latest revisions.\n"); |
| 783 |
printk(KERN_ERR "This software will not work reliably\n"); |
| 784 |
printk(KERN_ERR "on anything older than CPLD rev 4.!\n"); |
| 785 |
printk(KERN_ERR "WARNING!!!\n"); |
| 786 |
printk(KERN_ERR "WARNING!!!\n"); |
| 787 |
return 1; |
| 788 |
} |
| 789 |
|
| 790 |
db1200_nand_res[0].start = PB1200_NAND_PHYS_ADDR; |
| 791 |
db1200_nand_res[0].end = PB1200_NAND_PHYS_ADDR + 0xff; |
| 792 |
db1200_ide_res[0].start = PB1200_IDE_PHYS_ADDR; |
| 793 |
db1200_ide_res[0].end = PB1200_IDE_PHYS_ADDR + DB1200_IDE_PHYS_LEN - 1; |
| 794 |
db1200_eth_res[0].start = PB1200_ETH_PHYS_ADDR; |
| 795 |
db1200_eth_res[0].end = PB1200_ETH_PHYS_ADDR + 0xff; |
| 796 |
return 0; |
| 797 |
} |
| 798 |
|
| 799 |
int __init db1200_dev_setup(void) |
| 800 |
{ |
| 801 |
unsigned long pfc; |
| 802 |
unsigned short sw; |
| 803 |
int swapped, bid; |
| 804 |
struct clk *c; |
| 805 |
|
| 806 |
bid = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI)); |
| 807 |
if ((bid == BCSR_WHOAMI_PB1200_DDR1) || |
| 808 |
(bid == BCSR_WHOAMI_PB1200_DDR2)) { |
| 809 |
if (pb1200_res_fixup()) |
| 810 |
return -ENODEV; |
| 811 |
} |
| 812 |
|
| 813 |
/* GPIO7 is low-level triggered CPLD cascade */ |
| 814 |
irq_set_irq_type(AU1200_GPIO7_INT, IRQ_TYPE_LEVEL_LOW); |
| 815 |
bcsr_init_irq(DB1200_INT_BEGIN, DB1200_INT_END, AU1200_GPIO7_INT); |
| 816 |
|
| 817 |
/* SMBus/SPI on PSC0, Audio on PSC1 */ |
| 818 |
pfc = alchemy_rdsys(AU1000_SYS_PINFUNC); |
| 819 |
pfc &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B); |
| 820 |
pfc &= ~(SYS_PINFUNC_P1A | SYS_PINFUNC_P1B | SYS_PINFUNC_FS3); |
| 821 |
pfc |= SYS_PINFUNC_P1C; /* SPI is configured later */ |
| 822 |
alchemy_wrsys(pfc, AU1000_SYS_PINFUNC); |
| 823 |
|
| 824 |
/* get 50MHz for I2C driver on PSC0 */ |
| 825 |
c = clk_get(NULL, "psc0_intclk"); |
| 826 |
if (!IS_ERR(c)) { |
| 827 |
pfc = clk_round_rate(c, 50000000); |
| 828 |
if ((pfc < 1) || (abs(50000000 - pfc) > 2500000)) |
| 829 |
pr_warn("DB1200: can't get I2C close to 50MHz\n"); |
| 830 |
else |
| 831 |
clk_set_rate(c, pfc); |
| 832 |
clk_prepare_enable(c); |
| 833 |
clk_put(c); |
| 834 |
} |
| 835 |
|
| 836 |
/* insert/eject pairs: one of both is always screaming. To avoid |
| 837 |
* issues they must not be automatically enabled when initially |
| 838 |
* requested. |
| 839 |
*/ |
| 840 |
irq_set_status_flags(DB1200_SD0_INSERT_INT, IRQ_NOAUTOEN); |
| 841 |
irq_set_status_flags(DB1200_SD0_EJECT_INT, IRQ_NOAUTOEN); |
| 842 |
irq_set_status_flags(DB1200_PC0_INSERT_INT, IRQ_NOAUTOEN); |
| 843 |
irq_set_status_flags(DB1200_PC0_EJECT_INT, IRQ_NOAUTOEN); |
| 844 |
irq_set_status_flags(DB1200_PC1_INSERT_INT, IRQ_NOAUTOEN); |
| 845 |
irq_set_status_flags(DB1200_PC1_EJECT_INT, IRQ_NOAUTOEN); |
| 846 |
|
| 847 |
i2c_register_board_info(0, db1200_i2c_devs, |
| 848 |
ARRAY_SIZE(db1200_i2c_devs)); |
| 849 |
spi_register_board_info(db1200_spi_devs, |
| 850 |
ARRAY_SIZE(db1200_spi_devs)); |
| 851 |
|
| 852 |
/* SWITCHES: S6.8 I2C/SPI selector (OFF=I2C ON=SPI) |
| 853 |
* S6.7 AC97/I2S selector (OFF=AC97 ON=I2S) |
| 854 |
* or S12 on the PB1200. |
| 855 |
*/ |
| 856 |
|
| 857 |
/* NOTE: GPIO215 controls OTG VBUS supply. In SPI mode however |
| 858 |
* this pin is claimed by PSC0 (unused though, but pinmux doesn't |
| 859 |
* allow to free it without crippling the SPI interface). |
| 860 |
* As a result, in SPI mode, OTG simply won't work (PSC0 uses |
| 861 |
* it as an input pin which is pulled high on the boards). |
| 862 |
*/ |
| 863 |
pfc = alchemy_rdsys(AU1000_SYS_PINFUNC) & ~SYS_PINFUNC_P0A; |
| 864 |
|
| 865 |
/* switch off OTG VBUS supply */ |
| 866 |
gpio_request(215, "otg-vbus"); |
| 867 |
gpio_direction_output(215, 1); |
| 868 |
|
| 869 |
printk(KERN_INFO "%s device configuration:\n", get_system_type()); |
| 870 |
|
| 871 |
sw = bcsr_read(BCSR_SWITCHES); |
| 872 |
if (sw & BCSR_SWITCHES_DIP_8) { |
| 873 |
db1200_devs[0] = &db1200_i2c_dev; |
| 874 |
bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC0MUX, 0); |
| 875 |
|
| 876 |
pfc |= (2 << 17); /* GPIO2 block owns GPIO215 */ |
| 877 |
|
| 878 |
printk(KERN_INFO " S6.8 OFF: PSC0 mode I2C\n"); |
| 879 |
printk(KERN_INFO " OTG port VBUS supply available!\n"); |
| 880 |
} else { |
| 881 |
db1200_devs[0] = &db1200_spi_dev; |
| 882 |
bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_PSC0MUX); |
| 883 |
|
| 884 |
pfc |= (1 << 17); /* PSC0 owns GPIO215 */ |
| 885 |
|
| 886 |
printk(KERN_INFO " S6.8 ON : PSC0 mode SPI\n"); |
| 887 |
printk(KERN_INFO " OTG port VBUS supply disabled\n"); |
| 888 |
} |
| 889 |
alchemy_wrsys(pfc, AU1000_SYS_PINFUNC); |
| 890 |
|
| 891 |
/* Audio: DIP7 selects I2S(0)/AC97(1), but need I2C for I2S! |
| 892 |
* so: DIP7=1 || DIP8=0 => AC97, DIP7=0 && DIP8=1 => I2S |
| 893 |
*/ |
| 894 |
sw &= BCSR_SWITCHES_DIP_8 | BCSR_SWITCHES_DIP_7; |
| 895 |
if (sw == BCSR_SWITCHES_DIP_8) { |
| 896 |
bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_PSC1MUX); |
| 897 |
db1200_audio_dev.name = "au1xpsc_i2s"; |
| 898 |
db1200_sound_dev.name = "db1200-i2s"; |
| 899 |
printk(KERN_INFO " S6.7 ON : PSC1 mode I2S\n"); |
| 900 |
} else { |
| 901 |
bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC1MUX, 0); |
| 902 |
db1200_audio_dev.name = "au1xpsc_ac97"; |
| 903 |
db1200_sound_dev.name = "db1200-ac97"; |
| 904 |
printk(KERN_INFO " S6.7 OFF: PSC1 mode AC97\n"); |
| 905 |
} |
| 906 |
|
| 907 |
/* Audio PSC clock is supplied externally. (FIXME: platdata!!) */ |
| 908 |
__raw_writel(PSC_SEL_CLK_SERCLK, |
| 909 |
(void __iomem *)KSEG1ADDR(AU1550_PSC1_PHYS_ADDR) + PSC_SEL_OFFSET); |
| 910 |
wmb(); |
| 911 |
|
| 912 |
db1x_register_pcmcia_socket( |
| 913 |
AU1000_PCMCIA_ATTR_PHYS_ADDR, |
| 914 |
AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, |
| 915 |
AU1000_PCMCIA_MEM_PHYS_ADDR, |
| 916 |
AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, |
| 917 |
AU1000_PCMCIA_IO_PHYS_ADDR, |
| 918 |
AU1000_PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1, |
| 919 |
DB1200_PC0_INT, DB1200_PC0_INSERT_INT, |
| 920 |
/*DB1200_PC0_STSCHG_INT*/0, DB1200_PC0_EJECT_INT, 0); |
| 921 |
|
| 922 |
db1x_register_pcmcia_socket( |
| 923 |
AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004000000, |
| 924 |
AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1, |
| 925 |
AU1000_PCMCIA_MEM_PHYS_ADDR + 0x004000000, |
| 926 |
AU1000_PCMCIA_MEM_PHYS_ADDR + 0x004400000 - 1, |
| 927 |
AU1000_PCMCIA_IO_PHYS_ADDR + 0x004000000, |
| 928 |
AU1000_PCMCIA_IO_PHYS_ADDR + 0x004010000 - 1, |
| 929 |
DB1200_PC1_INT, DB1200_PC1_INSERT_INT, |
| 930 |
/*DB1200_PC1_STSCHG_INT*/0, DB1200_PC1_EJECT_INT, 1); |
| 931 |
|
| 932 |
swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1200_SWAPBOOT; |
| 933 |
db1x_register_norflash(64 << 20, 2, swapped); |
| 934 |
|
| 935 |
platform_add_devices(db1200_devs, ARRAY_SIZE(db1200_devs)); |
| 936 |
|
| 937 |
/* PB1200 is a DB1200 with a 2nd MMC and Camera connector */ |
| 938 |
if ((bid == BCSR_WHOAMI_PB1200_DDR1) || |
| 939 |
(bid == BCSR_WHOAMI_PB1200_DDR2)) |
| 940 |
platform_add_devices(pb1200_devs, ARRAY_SIZE(pb1200_devs)); |
| 941 |
|
| 942 |
return 0; |
| 943 |
} |