| 1 |
/* |
| 2 |
* Platform device support for Au1x00 SoCs. |
| 3 |
* |
| 4 |
* Copyright 2004, Matt Porter <[email protected]> |
| 5 |
* |
| 6 |
* (C) Copyright Embedded Alley Solutions, Inc 2005 |
| 7 |
* Author: Pantelis Antoniou <[email protected]> |
| 8 |
* |
| 9 |
* This file is licensed under the terms of the GNU General Public |
| 10 |
* License version 2. This program is licensed "as is" without any |
| 11 |
* warranty of any kind, whether express or implied. |
| 12 |
*/ |
| 13 |
|
| 14 |
#include <linux/clk.h> |
| 15 |
#include <linux/dma-mapping.h> |
| 16 |
#include <linux/etherdevice.h> |
| 17 |
#include <linux/init.h> |
| 18 |
#include <linux/platform_device.h> |
| 19 |
#include <linux/serial_8250.h> |
| 20 |
#include <linux/slab.h> |
| 21 |
#include <linux/usb/ehci_pdriver.h> |
| 22 |
#include <linux/usb/ohci_pdriver.h> |
| 23 |
|
| 24 |
#include <asm/mach-au1x00/au1000.h> |
| 25 |
#include <asm/mach-au1x00/au1xxx_dbdma.h> |
| 26 |
#include <asm/mach-au1x00/au1100_mmc.h> |
| 27 |
#include <asm/mach-au1x00/au1xxx_eth.h> |
| 28 |
|
| 29 |
#include <prom.h> |
| 30 |
|
| 31 |
static void alchemy_8250_pm(struct uart_port *port, unsigned int state, |
| 32 |
unsigned int old_state) |
| 33 |
{ |
| 34 |
#ifdef CONFIG_SERIAL_8250 |
| 35 |
switch (state) { |
| 36 |
case 0: |
| 37 |
alchemy_uart_enable(CPHYSADDR(port->membase)); |
| 38 |
serial8250_do_pm(port, state, old_state); |
| 39 |
break; |
| 40 |
case 3: /* power off */ |
| 41 |
serial8250_do_pm(port, state, old_state); |
| 42 |
alchemy_uart_disable(CPHYSADDR(port->membase)); |
| 43 |
break; |
| 44 |
default: |
| 45 |
serial8250_do_pm(port, state, old_state); |
| 46 |
break; |
| 47 |
} |
| 48 |
#endif |
| 49 |
} |
| 50 |
|
| 51 |
#define PORT(_base, _irq) \ |
| 52 |
{ \ |
| 53 |
.mapbase = _base, \ |
| 54 |
.mapsize = 0x1000, \ |
| 55 |
.irq = _irq, \ |
| 56 |
.regshift = 2, \ |
| 57 |
.flags = UPF_SKIP_TEST | UPF_IOREMAP | \ |
| 58 |
UPF_FIXED_TYPE, \ |
| 59 |
.type = PORT_16550A, \ |
| 60 |
.pm = alchemy_8250_pm, \ |
| 61 |
} |
| 62 |
|
| 63 |
static struct plat_serial8250_port au1x00_uart_data[][4] __initdata = { |
| 64 |
[ALCHEMY_CPU_AU1000] = { |
| 65 |
PORT(AU1000_UART0_PHYS_ADDR, AU1000_UART0_INT), |
| 66 |
PORT(AU1000_UART1_PHYS_ADDR, AU1000_UART1_INT), |
| 67 |
PORT(AU1000_UART2_PHYS_ADDR, AU1000_UART2_INT), |
| 68 |
PORT(AU1000_UART3_PHYS_ADDR, AU1000_UART3_INT), |
| 69 |
}, |
| 70 |
[ALCHEMY_CPU_AU1500] = { |
| 71 |
PORT(AU1000_UART0_PHYS_ADDR, AU1500_UART0_INT), |
| 72 |
PORT(AU1000_UART3_PHYS_ADDR, AU1500_UART3_INT), |
| 73 |
}, |
| 74 |
[ALCHEMY_CPU_AU1100] = { |
| 75 |
PORT(AU1000_UART0_PHYS_ADDR, AU1100_UART0_INT), |
| 76 |
PORT(AU1000_UART1_PHYS_ADDR, AU1100_UART1_INT), |
| 77 |
PORT(AU1000_UART3_PHYS_ADDR, AU1100_UART3_INT), |
| 78 |
}, |
| 79 |
[ALCHEMY_CPU_AU1550] = { |
| 80 |
PORT(AU1000_UART0_PHYS_ADDR, AU1550_UART0_INT), |
| 81 |
PORT(AU1000_UART1_PHYS_ADDR, AU1550_UART1_INT), |
| 82 |
PORT(AU1000_UART3_PHYS_ADDR, AU1550_UART3_INT), |
| 83 |
}, |
| 84 |
[ALCHEMY_CPU_AU1200] = { |
| 85 |
PORT(AU1000_UART0_PHYS_ADDR, AU1200_UART0_INT), |
| 86 |
PORT(AU1000_UART1_PHYS_ADDR, AU1200_UART1_INT), |
| 87 |
}, |
| 88 |
[ALCHEMY_CPU_AU1300] = { |
| 89 |
PORT(AU1300_UART0_PHYS_ADDR, AU1300_UART0_INT), |
| 90 |
PORT(AU1300_UART1_PHYS_ADDR, AU1300_UART1_INT), |
| 91 |
PORT(AU1300_UART2_PHYS_ADDR, AU1300_UART2_INT), |
| 92 |
PORT(AU1300_UART3_PHYS_ADDR, AU1300_UART3_INT), |
| 93 |
}, |
| 94 |
}; |
| 95 |
|
| 96 |
static struct platform_device au1xx0_uart_device = { |
| 97 |
.name = "serial8250", |
| 98 |
.id = PLAT8250_DEV_AU1X00, |
| 99 |
}; |
| 100 |
|
| 101 |
static void __init alchemy_setup_uarts(int ctype) |
| 102 |
{ |
| 103 |
long uartclk; |
| 104 |
int s = sizeof(struct plat_serial8250_port); |
| 105 |
int c = alchemy_get_uarts(ctype); |
| 106 |
struct plat_serial8250_port *ports; |
| 107 |
struct clk *clk = clk_get(NULL, ALCHEMY_PERIPH_CLK); |
| 108 |
|
| 109 |
if (IS_ERR(clk)) |
| 110 |
return; |
| 111 |
if (clk_prepare_enable(clk)) { |
| 112 |
clk_put(clk); |
| 113 |
return; |
| 114 |
} |
| 115 |
uartclk = clk_get_rate(clk); |
| 116 |
clk_put(clk); |
| 117 |
|
| 118 |
ports = kcalloc(s, (c + 1), GFP_KERNEL); |
| 119 |
if (!ports) { |
| 120 |
printk(KERN_INFO "Alchemy: no memory for UART data\n"); |
| 121 |
return; |
| 122 |
} |
| 123 |
memcpy(ports, au1x00_uart_data[ctype], s * c); |
| 124 |
au1xx0_uart_device.dev.platform_data = ports; |
| 125 |
|
| 126 |
/* Fill up uartclk. */ |
| 127 |
for (s = 0; s < c; s++) { |
| 128 |
ports[s].uartclk = uartclk; |
| 129 |
if (au_platform_setup(&ports[s]) < 0) { |
| 130 |
kfree(ports); |
| 131 |
printk(KERN_INFO "Alchemy: missing support for UARTs\n"); |
| 132 |
return; |
| 133 |
} |
| 134 |
} |
| 135 |
if (platform_device_register(&au1xx0_uart_device)) |
| 136 |
printk(KERN_INFO "Alchemy: failed to register UARTs\n"); |
| 137 |
} |
| 138 |
|
| 139 |
|
| 140 |
static u64 alchemy_all_dmamask = DMA_BIT_MASK(32); |
| 141 |
|
| 142 |
/* Power on callback for the ehci platform driver */ |
| 143 |
static int alchemy_ehci_power_on(struct platform_device *pdev) |
| 144 |
{ |
| 145 |
return alchemy_usb_control(ALCHEMY_USB_EHCI0, 1); |
| 146 |
} |
| 147 |
|
| 148 |
/* Power off/suspend callback for the ehci platform driver */ |
| 149 |
static void alchemy_ehci_power_off(struct platform_device *pdev) |
| 150 |
{ |
| 151 |
alchemy_usb_control(ALCHEMY_USB_EHCI0, 0); |
| 152 |
} |
| 153 |
|
| 154 |
static struct usb_ehci_pdata alchemy_ehci_pdata = { |
| 155 |
.no_io_watchdog = 1, |
| 156 |
.power_on = alchemy_ehci_power_on, |
| 157 |
.power_off = alchemy_ehci_power_off, |
| 158 |
.power_suspend = alchemy_ehci_power_off, |
| 159 |
}; |
| 160 |
|
| 161 |
/* Power on callback for the ohci platform driver */ |
| 162 |
static int alchemy_ohci_power_on(struct platform_device *pdev) |
| 163 |
{ |
| 164 |
int unit; |
| 165 |
|
| 166 |
unit = (pdev->id == 1) ? |
| 167 |
ALCHEMY_USB_OHCI1 : ALCHEMY_USB_OHCI0; |
| 168 |
|
| 169 |
return alchemy_usb_control(unit, 1); |
| 170 |
} |
| 171 |
|
| 172 |
/* Power off/suspend callback for the ohci platform driver */ |
| 173 |
static void alchemy_ohci_power_off(struct platform_device *pdev) |
| 174 |
{ |
| 175 |
int unit; |
| 176 |
|
| 177 |
unit = (pdev->id == 1) ? |
| 178 |
ALCHEMY_USB_OHCI1 : ALCHEMY_USB_OHCI0; |
| 179 |
|
| 180 |
alchemy_usb_control(unit, 0); |
| 181 |
} |
| 182 |
|
| 183 |
static struct usb_ohci_pdata alchemy_ohci_pdata = { |
| 184 |
.power_on = alchemy_ohci_power_on, |
| 185 |
.power_off = alchemy_ohci_power_off, |
| 186 |
.power_suspend = alchemy_ohci_power_off, |
| 187 |
}; |
| 188 |
|
| 189 |
static unsigned long alchemy_ohci_data[][2] __initdata = { |
| 190 |
[ALCHEMY_CPU_AU1000] = { AU1000_USB_OHCI_PHYS_ADDR, AU1000_USB_HOST_INT }, |
| 191 |
[ALCHEMY_CPU_AU1500] = { AU1000_USB_OHCI_PHYS_ADDR, AU1500_USB_HOST_INT }, |
| 192 |
[ALCHEMY_CPU_AU1100] = { AU1000_USB_OHCI_PHYS_ADDR, AU1100_USB_HOST_INT }, |
| 193 |
[ALCHEMY_CPU_AU1550] = { AU1550_USB_OHCI_PHYS_ADDR, AU1550_USB_HOST_INT }, |
| 194 |
[ALCHEMY_CPU_AU1200] = { AU1200_USB_OHCI_PHYS_ADDR, AU1200_USB_INT }, |
| 195 |
[ALCHEMY_CPU_AU1300] = { AU1300_USB_OHCI0_PHYS_ADDR, AU1300_USB_INT }, |
| 196 |
}; |
| 197 |
|
| 198 |
static unsigned long alchemy_ehci_data[][2] __initdata = { |
| 199 |
[ALCHEMY_CPU_AU1200] = { AU1200_USB_EHCI_PHYS_ADDR, AU1200_USB_INT }, |
| 200 |
[ALCHEMY_CPU_AU1300] = { AU1300_USB_EHCI_PHYS_ADDR, AU1300_USB_INT }, |
| 201 |
}; |
| 202 |
|
| 203 |
static int __init _new_usbres(struct resource **r, struct platform_device **d) |
| 204 |
{ |
| 205 |
*r = kzalloc_objs(struct resource, 2); |
| 206 |
if (!*r) |
| 207 |
return -ENOMEM; |
| 208 |
*d = kzalloc_obj(struct platform_device); |
| 209 |
if (!*d) { |
| 210 |
kfree(*r); |
| 211 |
return -ENOMEM; |
| 212 |
} |
| 213 |
|
| 214 |
(*d)->dev.coherent_dma_mask = DMA_BIT_MASK(32); |
| 215 |
(*d)->num_resources = 2; |
| 216 |
(*d)->resource = *r; |
| 217 |
|
| 218 |
return 0; |
| 219 |
} |
| 220 |
|
| 221 |
static void __init alchemy_setup_usb(int ctype) |
| 222 |
{ |
| 223 |
struct resource *res; |
| 224 |
struct platform_device *pdev; |
| 225 |
|
| 226 |
/* setup OHCI0. Every variant has one */ |
| 227 |
if (_new_usbres(&res, &pdev)) |
| 228 |
return; |
| 229 |
|
| 230 |
res[0].start = alchemy_ohci_data[ctype][0]; |
| 231 |
res[0].end = res[0].start + 0x100 - 1; |
| 232 |
res[0].flags = IORESOURCE_MEM; |
| 233 |
res[1].start = alchemy_ohci_data[ctype][1]; |
| 234 |
res[1].end = res[1].start; |
| 235 |
res[1].flags = IORESOURCE_IRQ; |
| 236 |
pdev->name = "ohci-platform"; |
| 237 |
pdev->id = 0; |
| 238 |
pdev->dev.dma_mask = &alchemy_all_dmamask; |
| 239 |
pdev->dev.platform_data = &alchemy_ohci_pdata; |
| 240 |
|
| 241 |
if (platform_device_register(pdev)) |
| 242 |
printk(KERN_INFO "Alchemy USB: cannot add OHCI0\n"); |
| 243 |
|
| 244 |
|
| 245 |
/* setup EHCI0: Au1200/Au1300 */ |
| 246 |
if ((ctype == ALCHEMY_CPU_AU1200) || (ctype == ALCHEMY_CPU_AU1300)) { |
| 247 |
if (_new_usbres(&res, &pdev)) |
| 248 |
return; |
| 249 |
|
| 250 |
res[0].start = alchemy_ehci_data[ctype][0]; |
| 251 |
res[0].end = res[0].start + 0x100 - 1; |
| 252 |
res[0].flags = IORESOURCE_MEM; |
| 253 |
res[1].start = alchemy_ehci_data[ctype][1]; |
| 254 |
res[1].end = res[1].start; |
| 255 |
res[1].flags = IORESOURCE_IRQ; |
| 256 |
pdev->name = "ehci-platform"; |
| 257 |
pdev->id = 0; |
| 258 |
pdev->dev.dma_mask = &alchemy_all_dmamask; |
| 259 |
pdev->dev.platform_data = &alchemy_ehci_pdata; |
| 260 |
|
| 261 |
if (platform_device_register(pdev)) |
| 262 |
printk(KERN_INFO "Alchemy USB: cannot add EHCI0\n"); |
| 263 |
} |
| 264 |
|
| 265 |
/* Au1300: OHCI1 */ |
| 266 |
if (ctype == ALCHEMY_CPU_AU1300) { |
| 267 |
if (_new_usbres(&res, &pdev)) |
| 268 |
return; |
| 269 |
|
| 270 |
res[0].start = AU1300_USB_OHCI1_PHYS_ADDR; |
| 271 |
res[0].end = res[0].start + 0x100 - 1; |
| 272 |
res[0].flags = IORESOURCE_MEM; |
| 273 |
res[1].start = AU1300_USB_INT; |
| 274 |
res[1].end = res[1].start; |
| 275 |
res[1].flags = IORESOURCE_IRQ; |
| 276 |
pdev->name = "ohci-platform"; |
| 277 |
pdev->id = 1; |
| 278 |
pdev->dev.dma_mask = &alchemy_all_dmamask; |
| 279 |
pdev->dev.platform_data = &alchemy_ohci_pdata; |
| 280 |
|
| 281 |
if (platform_device_register(pdev)) |
| 282 |
printk(KERN_INFO "Alchemy USB: cannot add OHCI1\n"); |
| 283 |
} |
| 284 |
} |
| 285 |
|
| 286 |
/* Macro to help defining the Ethernet MAC resources */ |
| 287 |
#define MAC_RES_COUNT 4 /* MAC regs, MAC en, MAC INT, MACDMA regs */ |
| 288 |
#define MAC_RES(_base, _enable, _irq, _macdma) \ |
| 289 |
{ \ |
| 290 |
.start = _base, \ |
| 291 |
.end = _base + 0xffff, \ |
| 292 |
.flags = IORESOURCE_MEM, \ |
| 293 |
}, \ |
| 294 |
{ \ |
| 295 |
.start = _enable, \ |
| 296 |
.end = _enable + 0x3, \ |
| 297 |
.flags = IORESOURCE_MEM, \ |
| 298 |
}, \ |
| 299 |
{ \ |
| 300 |
.start = _irq, \ |
| 301 |
.end = _irq, \ |
| 302 |
.flags = IORESOURCE_IRQ \ |
| 303 |
}, \ |
| 304 |
{ \ |
| 305 |
.start = _macdma, \ |
| 306 |
.end = _macdma + 0x1ff, \ |
| 307 |
.flags = IORESOURCE_MEM, \ |
| 308 |
} |
| 309 |
|
| 310 |
static struct resource au1xxx_eth0_resources[][MAC_RES_COUNT] __initdata = { |
| 311 |
[ALCHEMY_CPU_AU1000] = { |
| 312 |
MAC_RES(AU1000_MAC0_PHYS_ADDR, |
| 313 |
AU1000_MACEN_PHYS_ADDR, |
| 314 |
AU1000_MAC0_DMA_INT, |
| 315 |
AU1000_MACDMA0_PHYS_ADDR) |
| 316 |
}, |
| 317 |
[ALCHEMY_CPU_AU1500] = { |
| 318 |
MAC_RES(AU1500_MAC0_PHYS_ADDR, |
| 319 |
AU1500_MACEN_PHYS_ADDR, |
| 320 |
AU1500_MAC0_DMA_INT, |
| 321 |
AU1000_MACDMA0_PHYS_ADDR) |
| 322 |
}, |
| 323 |
[ALCHEMY_CPU_AU1100] = { |
| 324 |
MAC_RES(AU1000_MAC0_PHYS_ADDR, |
| 325 |
AU1000_MACEN_PHYS_ADDR, |
| 326 |
AU1100_MAC0_DMA_INT, |
| 327 |
AU1000_MACDMA0_PHYS_ADDR) |
| 328 |
}, |
| 329 |
[ALCHEMY_CPU_AU1550] = { |
| 330 |
MAC_RES(AU1000_MAC0_PHYS_ADDR, |
| 331 |
AU1000_MACEN_PHYS_ADDR, |
| 332 |
AU1550_MAC0_DMA_INT, |
| 333 |
AU1000_MACDMA0_PHYS_ADDR) |
| 334 |
}, |
| 335 |
}; |
| 336 |
|
| 337 |
static struct au1000_eth_platform_data au1xxx_eth0_platform_data = { |
| 338 |
.phy1_search_mac0 = 1, |
| 339 |
}; |
| 340 |
|
| 341 |
static struct platform_device au1xxx_eth0_device = { |
| 342 |
.name = "au1000-eth", |
| 343 |
.id = 0, |
| 344 |
.num_resources = MAC_RES_COUNT, |
| 345 |
.dev = { |
| 346 |
.dma_mask = &alchemy_all_dmamask, |
| 347 |
.coherent_dma_mask = DMA_BIT_MASK(32), |
| 348 |
.platform_data = &au1xxx_eth0_platform_data, |
| 349 |
}, |
| 350 |
}; |
| 351 |
|
| 352 |
static struct resource au1xxx_eth1_resources[][MAC_RES_COUNT] __initdata = { |
| 353 |
[ALCHEMY_CPU_AU1000] = { |
| 354 |
MAC_RES(AU1000_MAC1_PHYS_ADDR, |
| 355 |
AU1000_MACEN_PHYS_ADDR + 4, |
| 356 |
AU1000_MAC1_DMA_INT, |
| 357 |
AU1000_MACDMA1_PHYS_ADDR) |
| 358 |
}, |
| 359 |
[ALCHEMY_CPU_AU1500] = { |
| 360 |
MAC_RES(AU1500_MAC1_PHYS_ADDR, |
| 361 |
AU1500_MACEN_PHYS_ADDR + 4, |
| 362 |
AU1500_MAC1_DMA_INT, |
| 363 |
AU1000_MACDMA1_PHYS_ADDR) |
| 364 |
}, |
| 365 |
[ALCHEMY_CPU_AU1550] = { |
| 366 |
MAC_RES(AU1000_MAC1_PHYS_ADDR, |
| 367 |
AU1000_MACEN_PHYS_ADDR + 4, |
| 368 |
AU1550_MAC1_DMA_INT, |
| 369 |
AU1000_MACDMA1_PHYS_ADDR) |
| 370 |
}, |
| 371 |
}; |
| 372 |
|
| 373 |
static struct au1000_eth_platform_data au1xxx_eth1_platform_data = { |
| 374 |
.phy1_search_mac0 = 1, |
| 375 |
}; |
| 376 |
|
| 377 |
static struct platform_device au1xxx_eth1_device = { |
| 378 |
.name = "au1000-eth", |
| 379 |
.id = 1, |
| 380 |
.num_resources = MAC_RES_COUNT, |
| 381 |
.dev = { |
| 382 |
.dma_mask = &alchemy_all_dmamask, |
| 383 |
.coherent_dma_mask = DMA_BIT_MASK(32), |
| 384 |
.platform_data = &au1xxx_eth1_platform_data, |
| 385 |
}, |
| 386 |
}; |
| 387 |
|
| 388 |
void __init au1xxx_override_eth_cfg(unsigned int port, |
| 389 |
struct au1000_eth_platform_data *eth_data) |
| 390 |
{ |
| 391 |
if (!eth_data || port > 1) |
| 392 |
return; |
| 393 |
|
| 394 |
if (port == 0) |
| 395 |
memcpy(&au1xxx_eth0_platform_data, eth_data, |
| 396 |
sizeof(struct au1000_eth_platform_data)); |
| 397 |
else |
| 398 |
memcpy(&au1xxx_eth1_platform_data, eth_data, |
| 399 |
sizeof(struct au1000_eth_platform_data)); |
| 400 |
} |
| 401 |
|
| 402 |
static void __init alchemy_setup_macs(int ctype) |
| 403 |
{ |
| 404 |
int ret, i; |
| 405 |
unsigned char ethaddr[6]; |
| 406 |
struct resource *macres; |
| 407 |
|
| 408 |
/* Handle 1st MAC */ |
| 409 |
if (alchemy_get_macs(ctype) < 1) |
| 410 |
return; |
| 411 |
|
| 412 |
macres = kmemdup_array(au1xxx_eth0_resources[ctype], MAC_RES_COUNT, |
| 413 |
sizeof(*macres), GFP_KERNEL); |
| 414 |
if (!macres) { |
| 415 |
printk(KERN_INFO "Alchemy: no memory for MAC0 resources\n"); |
| 416 |
return; |
| 417 |
} |
| 418 |
au1xxx_eth0_device.resource = macres; |
| 419 |
|
| 420 |
i = prom_get_ethernet_addr(ethaddr); |
| 421 |
if (!i && !is_valid_ether_addr(au1xxx_eth0_platform_data.mac)) |
| 422 |
memcpy(au1xxx_eth0_platform_data.mac, ethaddr, 6); |
| 423 |
|
| 424 |
ret = platform_device_register(&au1xxx_eth0_device); |
| 425 |
if (ret) |
| 426 |
printk(KERN_INFO "Alchemy: failed to register MAC0\n"); |
| 427 |
|
| 428 |
|
| 429 |
/* Handle 2nd MAC */ |
| 430 |
if (alchemy_get_macs(ctype) < 2) |
| 431 |
return; |
| 432 |
|
| 433 |
macres = kmemdup_array(au1xxx_eth1_resources[ctype], MAC_RES_COUNT, |
| 434 |
sizeof(*macres), GFP_KERNEL); |
| 435 |
if (!macres) { |
| 436 |
printk(KERN_INFO "Alchemy: no memory for MAC1 resources\n"); |
| 437 |
return; |
| 438 |
} |
| 439 |
au1xxx_eth1_device.resource = macres; |
| 440 |
|
| 441 |
ethaddr[5] += 1; /* next addr for 2nd MAC */ |
| 442 |
if (!i && !is_valid_ether_addr(au1xxx_eth1_platform_data.mac)) |
| 443 |
memcpy(au1xxx_eth1_platform_data.mac, ethaddr, 6); |
| 444 |
|
| 445 |
/* Register second MAC if enabled in pinfunc */ |
| 446 |
if (!(alchemy_rdsys(AU1000_SYS_PINFUNC) & SYS_PF_NI2)) { |
| 447 |
ret = platform_device_register(&au1xxx_eth1_device); |
| 448 |
if (ret) |
| 449 |
printk(KERN_INFO "Alchemy: failed to register MAC1\n"); |
| 450 |
} |
| 451 |
} |
| 452 |
|
| 453 |
static int __init au1xxx_platform_init(void) |
| 454 |
{ |
| 455 |
int ctype = alchemy_get_cputype(); |
| 456 |
|
| 457 |
alchemy_setup_uarts(ctype); |
| 458 |
alchemy_setup_macs(ctype); |
| 459 |
alchemy_setup_usb(ctype); |
| 460 |
|
| 461 |
return 0; |
| 462 |
} |
| 463 |
|
| 464 |
arch_initcall(au1xxx_platform_init); |