| 1 |
/* |
| 2 |
* |
| 3 |
* BRIEF MODULE DESCRIPTION |
| 4 |
* The Descriptor Based DMA channel manager that first appeared |
| 5 |
* on the Au1550. I started with dma.c, but I think all that is |
| 6 |
* left is this initial comment :-) |
| 7 |
* |
| 8 |
* Copyright 2004 Embedded Edge, LLC |
| 9 |
* [email protected] |
| 10 |
* |
| 11 |
* This program is free software; you can redistribute it and/or modify it |
| 12 |
* under the terms of the GNU General Public License as published by the |
| 13 |
* Free Software Foundation; either version 2 of the License, or (at your |
| 14 |
* option) any later version. |
| 15 |
* |
| 16 |
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED |
| 17 |
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| 18 |
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN |
| 19 |
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, |
| 20 |
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
| 21 |
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF |
| 22 |
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON |
| 23 |
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| 24 |
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF |
| 25 |
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| 26 |
* |
| 27 |
* You should have received a copy of the GNU General Public License along |
| 28 |
* with this program; if not, write to the Free Software Foundation, Inc., |
| 29 |
* 675 Mass Ave, Cambridge, MA 02139, USA. |
| 30 |
* |
| 31 |
*/ |
| 32 |
|
| 33 |
#include <linux/dma-map-ops.h> /* for dma_default_coherent */ |
| 34 |
#include <linux/init.h> |
| 35 |
#include <linux/kernel.h> |
| 36 |
#include <linux/slab.h> |
| 37 |
#include <linux/spinlock.h> |
| 38 |
#include <linux/interrupt.h> |
| 39 |
#include <linux/export.h> |
| 40 |
#include <linux/syscore_ops.h> |
| 41 |
#include <asm/mach-au1x00/au1000.h> |
| 42 |
#include <asm/mach-au1x00/au1xxx_dbdma.h> |
| 43 |
|
| 44 |
/* |
| 45 |
* The Descriptor Based DMA supports up to 16 channels. |
| 46 |
* |
| 47 |
* There are 32 devices defined. We keep an internal structure |
| 48 |
* of devices using these channels, along with additional |
| 49 |
* information. |
| 50 |
* |
| 51 |
* We allocate the descriptors and allow access to them through various |
| 52 |
* functions. The drivers allocate the data buffers and assign them |
| 53 |
* to the descriptors. |
| 54 |
*/ |
| 55 |
static DEFINE_SPINLOCK(au1xxx_dbdma_spin_lock); |
| 56 |
|
| 57 |
/* I couldn't find a macro that did this... */ |
| 58 |
#define ALIGN_ADDR(x, a) ((((u32)(x)) + (a-1)) & ~(a-1)) |
| 59 |
|
| 60 |
static dbdma_global_t *dbdma_gptr = |
| 61 |
(dbdma_global_t *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR); |
| 62 |
static int dbdma_initialized; |
| 63 |
|
| 64 |
static dbdev_tab_t *dbdev_tab; |
| 65 |
|
| 66 |
static dbdev_tab_t au1550_dbdev_tab[] __initdata = { |
| 67 |
/* UARTS */ |
| 68 |
{ AU1550_DSCR_CMD0_UART0_TX, DEV_FLAGS_OUT, 0, 8, 0x11100004, 0, 0 }, |
| 69 |
{ AU1550_DSCR_CMD0_UART0_RX, DEV_FLAGS_IN, 0, 8, 0x11100000, 0, 0 }, |
| 70 |
{ AU1550_DSCR_CMD0_UART3_TX, DEV_FLAGS_OUT, 0, 8, 0x11400004, 0, 0 }, |
| 71 |
{ AU1550_DSCR_CMD0_UART3_RX, DEV_FLAGS_IN, 0, 8, 0x11400000, 0, 0 }, |
| 72 |
|
| 73 |
/* EXT DMA */ |
| 74 |
{ AU1550_DSCR_CMD0_DMA_REQ0, 0, 0, 0, 0x00000000, 0, 0 }, |
| 75 |
{ AU1550_DSCR_CMD0_DMA_REQ1, 0, 0, 0, 0x00000000, 0, 0 }, |
| 76 |
{ AU1550_DSCR_CMD0_DMA_REQ2, 0, 0, 0, 0x00000000, 0, 0 }, |
| 77 |
{ AU1550_DSCR_CMD0_DMA_REQ3, 0, 0, 0, 0x00000000, 0, 0 }, |
| 78 |
|
| 79 |
/* USB DEV */ |
| 80 |
{ AU1550_DSCR_CMD0_USBDEV_RX0, DEV_FLAGS_IN, 4, 8, 0x10200000, 0, 0 }, |
| 81 |
{ AU1550_DSCR_CMD0_USBDEV_TX0, DEV_FLAGS_OUT, 4, 8, 0x10200004, 0, 0 }, |
| 82 |
{ AU1550_DSCR_CMD0_USBDEV_TX1, DEV_FLAGS_OUT, 4, 8, 0x10200008, 0, 0 }, |
| 83 |
{ AU1550_DSCR_CMD0_USBDEV_TX2, DEV_FLAGS_OUT, 4, 8, 0x1020000c, 0, 0 }, |
| 84 |
{ AU1550_DSCR_CMD0_USBDEV_RX3, DEV_FLAGS_IN, 4, 8, 0x10200010, 0, 0 }, |
| 85 |
{ AU1550_DSCR_CMD0_USBDEV_RX4, DEV_FLAGS_IN, 4, 8, 0x10200014, 0, 0 }, |
| 86 |
|
| 87 |
/* PSCs */ |
| 88 |
{ AU1550_DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 0, 0x11a0001c, 0, 0 }, |
| 89 |
{ AU1550_DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 0, 0x11a0001c, 0, 0 }, |
| 90 |
{ AU1550_DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT, 0, 0, 0x11b0001c, 0, 0 }, |
| 91 |
{ AU1550_DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN, 0, 0, 0x11b0001c, 0, 0 }, |
| 92 |
{ AU1550_DSCR_CMD0_PSC2_TX, DEV_FLAGS_OUT, 0, 0, 0x10a0001c, 0, 0 }, |
| 93 |
{ AU1550_DSCR_CMD0_PSC2_RX, DEV_FLAGS_IN, 0, 0, 0x10a0001c, 0, 0 }, |
| 94 |
{ AU1550_DSCR_CMD0_PSC3_TX, DEV_FLAGS_OUT, 0, 0, 0x10b0001c, 0, 0 }, |
| 95 |
{ AU1550_DSCR_CMD0_PSC3_RX, DEV_FLAGS_IN, 0, 0, 0x10b0001c, 0, 0 }, |
| 96 |
|
| 97 |
{ AU1550_DSCR_CMD0_PCI_WRITE, 0, 0, 0, 0x00000000, 0, 0 }, /* PCI */ |
| 98 |
{ AU1550_DSCR_CMD0_NAND_FLASH, 0, 0, 0, 0x00000000, 0, 0 }, /* NAND */ |
| 99 |
|
| 100 |
/* MAC 0 */ |
| 101 |
{ AU1550_DSCR_CMD0_MAC0_RX, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 }, |
| 102 |
{ AU1550_DSCR_CMD0_MAC0_TX, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 }, |
| 103 |
|
| 104 |
/* MAC 1 */ |
| 105 |
{ AU1550_DSCR_CMD0_MAC1_RX, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 }, |
| 106 |
{ AU1550_DSCR_CMD0_MAC1_TX, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 }, |
| 107 |
|
| 108 |
{ DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, |
| 109 |
{ DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, |
| 110 |
}; |
| 111 |
|
| 112 |
static dbdev_tab_t au1200_dbdev_tab[] __initdata = { |
| 113 |
{ AU1200_DSCR_CMD0_UART0_TX, DEV_FLAGS_OUT, 0, 8, 0x11100004, 0, 0 }, |
| 114 |
{ AU1200_DSCR_CMD0_UART0_RX, DEV_FLAGS_IN, 0, 8, 0x11100000, 0, 0 }, |
| 115 |
{ AU1200_DSCR_CMD0_UART1_TX, DEV_FLAGS_OUT, 0, 8, 0x11200004, 0, 0 }, |
| 116 |
{ AU1200_DSCR_CMD0_UART1_RX, DEV_FLAGS_IN, 0, 8, 0x11200000, 0, 0 }, |
| 117 |
|
| 118 |
{ AU1200_DSCR_CMD0_DMA_REQ0, 0, 0, 0, 0x00000000, 0, 0 }, |
| 119 |
{ AU1200_DSCR_CMD0_DMA_REQ1, 0, 0, 0, 0x00000000, 0, 0 }, |
| 120 |
|
| 121 |
{ AU1200_DSCR_CMD0_MAE_BE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, |
| 122 |
{ AU1200_DSCR_CMD0_MAE_FE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, |
| 123 |
{ AU1200_DSCR_CMD0_MAE_BOTH, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, |
| 124 |
{ AU1200_DSCR_CMD0_LCD, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, |
| 125 |
|
| 126 |
{ AU1200_DSCR_CMD0_SDMS_TX0, DEV_FLAGS_OUT, 4, 8, 0x10600000, 0, 0 }, |
| 127 |
{ AU1200_DSCR_CMD0_SDMS_RX0, DEV_FLAGS_IN, 4, 8, 0x10600004, 0, 0 }, |
| 128 |
{ AU1200_DSCR_CMD0_SDMS_TX1, DEV_FLAGS_OUT, 4, 8, 0x10680000, 0, 0 }, |
| 129 |
{ AU1200_DSCR_CMD0_SDMS_RX1, DEV_FLAGS_IN, 4, 8, 0x10680004, 0, 0 }, |
| 130 |
|
| 131 |
{ AU1200_DSCR_CMD0_AES_RX, DEV_FLAGS_IN , 4, 32, 0x10300008, 0, 0 }, |
| 132 |
{ AU1200_DSCR_CMD0_AES_TX, DEV_FLAGS_OUT, 4, 32, 0x10300004, 0, 0 }, |
| 133 |
|
| 134 |
{ AU1200_DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 16, 0x11a0001c, 0, 0 }, |
| 135 |
{ AU1200_DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 16, 0x11a0001c, 0, 0 }, |
| 136 |
{ AU1200_DSCR_CMD0_PSC0_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, |
| 137 |
{ AU1200_DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT, 0, 16, 0x11b0001c, 0, 0 }, |
| 138 |
{ AU1200_DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN, 0, 16, 0x11b0001c, 0, 0 }, |
| 139 |
{ AU1200_DSCR_CMD0_PSC1_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, |
| 140 |
|
| 141 |
{ AU1200_DSCR_CMD0_CIM_RXA, DEV_FLAGS_IN, 0, 32, 0x14004020, 0, 0 }, |
| 142 |
{ AU1200_DSCR_CMD0_CIM_RXB, DEV_FLAGS_IN, 0, 32, 0x14004040, 0, 0 }, |
| 143 |
{ AU1200_DSCR_CMD0_CIM_RXC, DEV_FLAGS_IN, 0, 32, 0x14004060, 0, 0 }, |
| 144 |
{ AU1200_DSCR_CMD0_CIM_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, |
| 145 |
|
| 146 |
{ AU1200_DSCR_CMD0_NAND_FLASH, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 }, |
| 147 |
|
| 148 |
{ DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, |
| 149 |
{ DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, |
| 150 |
}; |
| 151 |
|
| 152 |
static dbdev_tab_t au1300_dbdev_tab[] __initdata = { |
| 153 |
{ AU1300_DSCR_CMD0_UART0_TX, DEV_FLAGS_OUT, 0, 8, 0x10100004, 0, 0 }, |
| 154 |
{ AU1300_DSCR_CMD0_UART0_RX, DEV_FLAGS_IN, 0, 8, 0x10100000, 0, 0 }, |
| 155 |
{ AU1300_DSCR_CMD0_UART1_TX, DEV_FLAGS_OUT, 0, 8, 0x10101004, 0, 0 }, |
| 156 |
{ AU1300_DSCR_CMD0_UART1_RX, DEV_FLAGS_IN, 0, 8, 0x10101000, 0, 0 }, |
| 157 |
{ AU1300_DSCR_CMD0_UART2_TX, DEV_FLAGS_OUT, 0, 8, 0x10102004, 0, 0 }, |
| 158 |
{ AU1300_DSCR_CMD0_UART2_RX, DEV_FLAGS_IN, 0, 8, 0x10102000, 0, 0 }, |
| 159 |
{ AU1300_DSCR_CMD0_UART3_TX, DEV_FLAGS_OUT, 0, 8, 0x10103004, 0, 0 }, |
| 160 |
{ AU1300_DSCR_CMD0_UART3_RX, DEV_FLAGS_IN, 0, 8, 0x10103000, 0, 0 }, |
| 161 |
|
| 162 |
{ AU1300_DSCR_CMD0_SDMS_TX0, DEV_FLAGS_OUT, 4, 8, 0x10600000, 0, 0 }, |
| 163 |
{ AU1300_DSCR_CMD0_SDMS_RX0, DEV_FLAGS_IN, 4, 8, 0x10600004, 0, 0 }, |
| 164 |
{ AU1300_DSCR_CMD0_SDMS_TX1, DEV_FLAGS_OUT, 8, 8, 0x10601000, 0, 0 }, |
| 165 |
{ AU1300_DSCR_CMD0_SDMS_RX1, DEV_FLAGS_IN, 8, 8, 0x10601004, 0, 0 }, |
| 166 |
|
| 167 |
{ AU1300_DSCR_CMD0_AES_RX, DEV_FLAGS_IN , 4, 32, 0x10300008, 0, 0 }, |
| 168 |
{ AU1300_DSCR_CMD0_AES_TX, DEV_FLAGS_OUT, 4, 32, 0x10300004, 0, 0 }, |
| 169 |
|
| 170 |
{ AU1300_DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 16, 0x10a0001c, 0, 0 }, |
| 171 |
{ AU1300_DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 16, 0x10a0001c, 0, 0 }, |
| 172 |
{ AU1300_DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT, 0, 16, 0x10a0101c, 0, 0 }, |
| 173 |
{ AU1300_DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN, 0, 16, 0x10a0101c, 0, 0 }, |
| 174 |
{ AU1300_DSCR_CMD0_PSC2_TX, DEV_FLAGS_OUT, 0, 16, 0x10a0201c, 0, 0 }, |
| 175 |
{ AU1300_DSCR_CMD0_PSC2_RX, DEV_FLAGS_IN, 0, 16, 0x10a0201c, 0, 0 }, |
| 176 |
{ AU1300_DSCR_CMD0_PSC3_TX, DEV_FLAGS_OUT, 0, 16, 0x10a0301c, 0, 0 }, |
| 177 |
{ AU1300_DSCR_CMD0_PSC3_RX, DEV_FLAGS_IN, 0, 16, 0x10a0301c, 0, 0 }, |
| 178 |
|
| 179 |
{ AU1300_DSCR_CMD0_LCD, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, |
| 180 |
{ AU1300_DSCR_CMD0_NAND_FLASH, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 }, |
| 181 |
|
| 182 |
{ AU1300_DSCR_CMD0_SDMS_TX2, DEV_FLAGS_OUT, 4, 8, 0x10602000, 0, 0 }, |
| 183 |
{ AU1300_DSCR_CMD0_SDMS_RX2, DEV_FLAGS_IN, 4, 8, 0x10602004, 0, 0 }, |
| 184 |
|
| 185 |
{ AU1300_DSCR_CMD0_CIM_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, |
| 186 |
|
| 187 |
{ AU1300_DSCR_CMD0_UDMA, DEV_FLAGS_ANYUSE, 0, 32, 0x14001810, 0, 0 }, |
| 188 |
|
| 189 |
{ AU1300_DSCR_CMD0_DMA_REQ0, 0, 0, 0, 0x00000000, 0, 0 }, |
| 190 |
{ AU1300_DSCR_CMD0_DMA_REQ1, 0, 0, 0, 0x00000000, 0, 0 }, |
| 191 |
|
| 192 |
{ DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, |
| 193 |
{ DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, |
| 194 |
}; |
| 195 |
|
| 196 |
/* 32 predefined plus 32 custom */ |
| 197 |
#define DBDEV_TAB_SIZE 64 |
| 198 |
|
| 199 |
static chan_tab_t *chan_tab_ptr[NUM_DBDMA_CHANS]; |
| 200 |
|
| 201 |
static dbdev_tab_t *find_dbdev_id(u32 id) |
| 202 |
{ |
| 203 |
int i; |
| 204 |
dbdev_tab_t *p; |
| 205 |
for (i = 0; i < DBDEV_TAB_SIZE; ++i) { |
| 206 |
p = &dbdev_tab[i]; |
| 207 |
if (p->dev_id == id) |
| 208 |
return p; |
| 209 |
} |
| 210 |
return NULL; |
| 211 |
} |
| 212 |
|
| 213 |
void *au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp) |
| 214 |
{ |
| 215 |
return phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); |
| 216 |
} |
| 217 |
EXPORT_SYMBOL(au1xxx_ddma_get_nextptr_virt); |
| 218 |
|
| 219 |
u32 au1xxx_ddma_add_device(dbdev_tab_t *dev) |
| 220 |
{ |
| 221 |
u32 ret = 0; |
| 222 |
dbdev_tab_t *p; |
| 223 |
static u16 new_id = 0x1000; |
| 224 |
|
| 225 |
p = find_dbdev_id(~0); |
| 226 |
if (NULL != p) { |
| 227 |
memcpy(p, dev, sizeof(dbdev_tab_t)); |
| 228 |
p->dev_id = DSCR_DEV2CUSTOM_ID(new_id, dev->dev_id); |
| 229 |
ret = p->dev_id; |
| 230 |
new_id++; |
| 231 |
#if 0 |
| 232 |
printk(KERN_DEBUG "add_device: id:%x flags:%x padd:%x\n", |
| 233 |
p->dev_id, p->dev_flags, p->dev_physaddr); |
| 234 |
#endif |
| 235 |
} |
| 236 |
|
| 237 |
return ret; |
| 238 |
} |
| 239 |
EXPORT_SYMBOL(au1xxx_ddma_add_device); |
| 240 |
|
| 241 |
void au1xxx_ddma_del_device(u32 devid) |
| 242 |
{ |
| 243 |
dbdev_tab_t *p = find_dbdev_id(devid); |
| 244 |
|
| 245 |
if (p != NULL) { |
| 246 |
memset(p, 0, sizeof(dbdev_tab_t)); |
| 247 |
p->dev_id = ~0; |
| 248 |
} |
| 249 |
} |
| 250 |
EXPORT_SYMBOL(au1xxx_ddma_del_device); |
| 251 |
|
| 252 |
/* Allocate a channel and return a non-zero descriptor if successful. */ |
| 253 |
u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid, |
| 254 |
void (*callback)(int, void *), void *callparam) |
| 255 |
{ |
| 256 |
unsigned long flags; |
| 257 |
u32 used, chan; |
| 258 |
u32 dcp; |
| 259 |
int i; |
| 260 |
dbdev_tab_t *stp, *dtp; |
| 261 |
chan_tab_t *ctp; |
| 262 |
au1x_dma_chan_t *cp; |
| 263 |
|
| 264 |
/* |
| 265 |
* We do the initialization on the first channel allocation. |
| 266 |
* We have to wait because of the interrupt handler initialization |
| 267 |
* which can't be done successfully during board set up. |
| 268 |
*/ |
| 269 |
if (!dbdma_initialized) |
| 270 |
return 0; |
| 271 |
|
| 272 |
stp = find_dbdev_id(srcid); |
| 273 |
if (stp == NULL) |
| 274 |
return 0; |
| 275 |
dtp = find_dbdev_id(destid); |
| 276 |
if (dtp == NULL) |
| 277 |
return 0; |
| 278 |
|
| 279 |
used = 0; |
| 280 |
|
| 281 |
/* Check to see if we can get both channels. */ |
| 282 |
spin_lock_irqsave(&au1xxx_dbdma_spin_lock, flags); |
| 283 |
if (!(stp->dev_flags & DEV_FLAGS_INUSE) || |
| 284 |
(stp->dev_flags & DEV_FLAGS_ANYUSE)) { |
| 285 |
/* Got source */ |
| 286 |
stp->dev_flags |= DEV_FLAGS_INUSE; |
| 287 |
if (!(dtp->dev_flags & DEV_FLAGS_INUSE) || |
| 288 |
(dtp->dev_flags & DEV_FLAGS_ANYUSE)) { |
| 289 |
/* Got destination */ |
| 290 |
dtp->dev_flags |= DEV_FLAGS_INUSE; |
| 291 |
} else { |
| 292 |
/* Can't get dest. Release src. */ |
| 293 |
stp->dev_flags &= ~DEV_FLAGS_INUSE; |
| 294 |
used++; |
| 295 |
} |
| 296 |
} else |
| 297 |
used++; |
| 298 |
spin_unlock_irqrestore(&au1xxx_dbdma_spin_lock, flags); |
| 299 |
|
| 300 |
if (used) |
| 301 |
return 0; |
| 302 |
|
| 303 |
/* Let's see if we can allocate a channel for it. */ |
| 304 |
ctp = NULL; |
| 305 |
chan = 0; |
| 306 |
spin_lock_irqsave(&au1xxx_dbdma_spin_lock, flags); |
| 307 |
for (i = 0; i < NUM_DBDMA_CHANS; i++) |
| 308 |
if (chan_tab_ptr[i] == NULL) { |
| 309 |
/* |
| 310 |
* If kmalloc fails, it is caught below same |
| 311 |
* as a channel not available. |
| 312 |
*/ |
| 313 |
ctp = kmalloc_obj(chan_tab_t, GFP_ATOMIC); |
| 314 |
chan_tab_ptr[i] = ctp; |
| 315 |
break; |
| 316 |
} |
| 317 |
spin_unlock_irqrestore(&au1xxx_dbdma_spin_lock, flags); |
| 318 |
|
| 319 |
if (ctp != NULL) { |
| 320 |
memset(ctp, 0, sizeof(chan_tab_t)); |
| 321 |
ctp->chan_index = chan = i; |
| 322 |
dcp = KSEG1ADDR(AU1550_DBDMA_PHYS_ADDR); |
| 323 |
dcp += (0x0100 * chan); |
| 324 |
ctp->chan_ptr = (au1x_dma_chan_t *)dcp; |
| 325 |
cp = (au1x_dma_chan_t *)dcp; |
| 326 |
ctp->chan_src = stp; |
| 327 |
ctp->chan_dest = dtp; |
| 328 |
ctp->chan_callback = callback; |
| 329 |
ctp->chan_callparam = callparam; |
| 330 |
|
| 331 |
/* Initialize channel configuration. */ |
| 332 |
i = 0; |
| 333 |
if (stp->dev_intlevel) |
| 334 |
i |= DDMA_CFG_SED; |
| 335 |
if (stp->dev_intpolarity) |
| 336 |
i |= DDMA_CFG_SP; |
| 337 |
if (dtp->dev_intlevel) |
| 338 |
i |= DDMA_CFG_DED; |
| 339 |
if (dtp->dev_intpolarity) |
| 340 |
i |= DDMA_CFG_DP; |
| 341 |
if ((stp->dev_flags & DEV_FLAGS_SYNC) || |
| 342 |
(dtp->dev_flags & DEV_FLAGS_SYNC)) |
| 343 |
i |= DDMA_CFG_SYNC; |
| 344 |
cp->ddma_cfg = i; |
| 345 |
wmb(); /* drain writebuffer */ |
| 346 |
|
| 347 |
/* |
| 348 |
* Return a non-zero value that can be used to find the channel |
| 349 |
* information in subsequent operations. |
| 350 |
*/ |
| 351 |
return (u32)(&chan_tab_ptr[chan]); |
| 352 |
} |
| 353 |
|
| 354 |
/* Release devices */ |
| 355 |
stp->dev_flags &= ~DEV_FLAGS_INUSE; |
| 356 |
dtp->dev_flags &= ~DEV_FLAGS_INUSE; |
| 357 |
|
| 358 |
return 0; |
| 359 |
} |
| 360 |
EXPORT_SYMBOL(au1xxx_dbdma_chan_alloc); |
| 361 |
|
| 362 |
/* |
| 363 |
* Set the device width if source or destination is a FIFO. |
| 364 |
* Should be 8, 16, or 32 bits. |
| 365 |
*/ |
| 366 |
u32 au1xxx_dbdma_set_devwidth(u32 chanid, int bits) |
| 367 |
{ |
| 368 |
u32 rv; |
| 369 |
chan_tab_t *ctp; |
| 370 |
dbdev_tab_t *stp, *dtp; |
| 371 |
|
| 372 |
ctp = *((chan_tab_t **)chanid); |
| 373 |
stp = ctp->chan_src; |
| 374 |
dtp = ctp->chan_dest; |
| 375 |
rv = 0; |
| 376 |
|
| 377 |
if (stp->dev_flags & DEV_FLAGS_IN) { /* Source in fifo */ |
| 378 |
rv = stp->dev_devwidth; |
| 379 |
stp->dev_devwidth = bits; |
| 380 |
} |
| 381 |
if (dtp->dev_flags & DEV_FLAGS_OUT) { /* Destination out fifo */ |
| 382 |
rv = dtp->dev_devwidth; |
| 383 |
dtp->dev_devwidth = bits; |
| 384 |
} |
| 385 |
|
| 386 |
return rv; |
| 387 |
} |
| 388 |
EXPORT_SYMBOL(au1xxx_dbdma_set_devwidth); |
| 389 |
|
| 390 |
/* Allocate a descriptor ring, initializing as much as possible. */ |
| 391 |
u32 au1xxx_dbdma_ring_alloc(u32 chanid, int entries) |
| 392 |
{ |
| 393 |
int i; |
| 394 |
u32 desc_base, srcid, destid; |
| 395 |
u32 cmd0, cmd1, src1, dest1; |
| 396 |
u32 src0, dest0; |
| 397 |
chan_tab_t *ctp; |
| 398 |
dbdev_tab_t *stp, *dtp; |
| 399 |
au1x_ddma_desc_t *dp; |
| 400 |
|
| 401 |
/* |
| 402 |
* I guess we could check this to be within the |
| 403 |
* range of the table...... |
| 404 |
*/ |
| 405 |
ctp = *((chan_tab_t **)chanid); |
| 406 |
stp = ctp->chan_src; |
| 407 |
dtp = ctp->chan_dest; |
| 408 |
|
| 409 |
/* |
| 410 |
* The descriptors must be 32-byte aligned. There is a |
| 411 |
* possibility the allocation will give us such an address, |
| 412 |
* and if we try that first we are likely to not waste larger |
| 413 |
* slabs of memory. |
| 414 |
*/ |
| 415 |
desc_base = (u32) kmalloc_objs(au1x_ddma_desc_t, entries, |
| 416 |
GFP_KERNEL | GFP_DMA); |
| 417 |
if (desc_base == 0) |
| 418 |
return 0; |
| 419 |
|
| 420 |
if (desc_base & 0x1f) { |
| 421 |
/* |
| 422 |
* Lost....do it again, allocate extra, and round |
| 423 |
* the address base. |
| 424 |
*/ |
| 425 |
kfree((const void *)desc_base); |
| 426 |
i = entries * sizeof(au1x_ddma_desc_t); |
| 427 |
i += (sizeof(au1x_ddma_desc_t) - 1); |
| 428 |
desc_base = (u32)kmalloc(i, GFP_KERNEL|GFP_DMA); |
| 429 |
if (desc_base == 0) |
| 430 |
return 0; |
| 431 |
|
| 432 |
ctp->cdb_membase = desc_base; |
| 433 |
desc_base = ALIGN_ADDR(desc_base, sizeof(au1x_ddma_desc_t)); |
| 434 |
} else |
| 435 |
ctp->cdb_membase = desc_base; |
| 436 |
|
| 437 |
dp = (au1x_ddma_desc_t *)desc_base; |
| 438 |
|
| 439 |
/* Keep track of the base descriptor. */ |
| 440 |
ctp->chan_desc_base = dp; |
| 441 |
|
| 442 |
/* Initialize the rings with as much information as we know. */ |
| 443 |
srcid = stp->dev_id; |
| 444 |
destid = dtp->dev_id; |
| 445 |
|
| 446 |
cmd0 = cmd1 = src1 = dest1 = 0; |
| 447 |
src0 = dest0 = 0; |
| 448 |
|
| 449 |
cmd0 |= DSCR_CMD0_SID(srcid); |
| 450 |
cmd0 |= DSCR_CMD0_DID(destid); |
| 451 |
cmd0 |= DSCR_CMD0_IE | DSCR_CMD0_CV; |
| 452 |
cmd0 |= DSCR_CMD0_ST(DSCR_CMD0_ST_NOCHANGE); |
| 453 |
|
| 454 |
/* Is it mem to mem transfer? */ |
| 455 |
if (((DSCR_CUSTOM2DEV_ID(srcid) == DSCR_CMD0_THROTTLE) || |
| 456 |
(DSCR_CUSTOM2DEV_ID(srcid) == DSCR_CMD0_ALWAYS)) && |
| 457 |
((DSCR_CUSTOM2DEV_ID(destid) == DSCR_CMD0_THROTTLE) || |
| 458 |
(DSCR_CUSTOM2DEV_ID(destid) == DSCR_CMD0_ALWAYS))) |
| 459 |
cmd0 |= DSCR_CMD0_MEM; |
| 460 |
|
| 461 |
switch (stp->dev_devwidth) { |
| 462 |
case 8: |
| 463 |
cmd0 |= DSCR_CMD0_SW(DSCR_CMD0_BYTE); |
| 464 |
break; |
| 465 |
case 16: |
| 466 |
cmd0 |= DSCR_CMD0_SW(DSCR_CMD0_HALFWORD); |
| 467 |
break; |
| 468 |
case 32: |
| 469 |
default: |
| 470 |
cmd0 |= DSCR_CMD0_SW(DSCR_CMD0_WORD); |
| 471 |
break; |
| 472 |
} |
| 473 |
|
| 474 |
switch (dtp->dev_devwidth) { |
| 475 |
case 8: |
| 476 |
cmd0 |= DSCR_CMD0_DW(DSCR_CMD0_BYTE); |
| 477 |
break; |
| 478 |
case 16: |
| 479 |
cmd0 |= DSCR_CMD0_DW(DSCR_CMD0_HALFWORD); |
| 480 |
break; |
| 481 |
case 32: |
| 482 |
default: |
| 483 |
cmd0 |= DSCR_CMD0_DW(DSCR_CMD0_WORD); |
| 484 |
break; |
| 485 |
} |
| 486 |
|
| 487 |
/* |
| 488 |
* If the device is marked as an in/out FIFO, ensure it is |
| 489 |
* set non-coherent. |
| 490 |
*/ |
| 491 |
if (stp->dev_flags & DEV_FLAGS_IN) |
| 492 |
cmd0 |= DSCR_CMD0_SN; /* Source in FIFO */ |
| 493 |
if (dtp->dev_flags & DEV_FLAGS_OUT) |
| 494 |
cmd0 |= DSCR_CMD0_DN; /* Destination out FIFO */ |
| 495 |
|
| 496 |
/* |
| 497 |
* Set up source1. For now, assume no stride and increment. |
| 498 |
* A channel attribute update can change this later. |
| 499 |
*/ |
| 500 |
switch (stp->dev_tsize) { |
| 501 |
case 1: |
| 502 |
src1 |= DSCR_SRC1_STS(DSCR_xTS_SIZE1); |
| 503 |
break; |
| 504 |
case 2: |
| 505 |
src1 |= DSCR_SRC1_STS(DSCR_xTS_SIZE2); |
| 506 |
break; |
| 507 |
case 4: |
| 508 |
src1 |= DSCR_SRC1_STS(DSCR_xTS_SIZE4); |
| 509 |
break; |
| 510 |
case 8: |
| 511 |
default: |
| 512 |
src1 |= DSCR_SRC1_STS(DSCR_xTS_SIZE8); |
| 513 |
break; |
| 514 |
} |
| 515 |
|
| 516 |
/* If source input is FIFO, set static address. */ |
| 517 |
if (stp->dev_flags & DEV_FLAGS_IN) { |
| 518 |
if (stp->dev_flags & DEV_FLAGS_BURSTABLE) |
| 519 |
src1 |= DSCR_SRC1_SAM(DSCR_xAM_BURST); |
| 520 |
else |
| 521 |
src1 |= DSCR_SRC1_SAM(DSCR_xAM_STATIC); |
| 522 |
} |
| 523 |
|
| 524 |
if (stp->dev_physaddr) |
| 525 |
src0 = stp->dev_physaddr; |
| 526 |
|
| 527 |
/* |
| 528 |
* Set up dest1. For now, assume no stride and increment. |
| 529 |
* A channel attribute update can change this later. |
| 530 |
*/ |
| 531 |
switch (dtp->dev_tsize) { |
| 532 |
case 1: |
| 533 |
dest1 |= DSCR_DEST1_DTS(DSCR_xTS_SIZE1); |
| 534 |
break; |
| 535 |
case 2: |
| 536 |
dest1 |= DSCR_DEST1_DTS(DSCR_xTS_SIZE2); |
| 537 |
break; |
| 538 |
case 4: |
| 539 |
dest1 |= DSCR_DEST1_DTS(DSCR_xTS_SIZE4); |
| 540 |
break; |
| 541 |
case 8: |
| 542 |
default: |
| 543 |
dest1 |= DSCR_DEST1_DTS(DSCR_xTS_SIZE8); |
| 544 |
break; |
| 545 |
} |
| 546 |
|
| 547 |
/* If destination output is FIFO, set static address. */ |
| 548 |
if (dtp->dev_flags & DEV_FLAGS_OUT) { |
| 549 |
if (dtp->dev_flags & DEV_FLAGS_BURSTABLE) |
| 550 |
dest1 |= DSCR_DEST1_DAM(DSCR_xAM_BURST); |
| 551 |
else |
| 552 |
dest1 |= DSCR_DEST1_DAM(DSCR_xAM_STATIC); |
| 553 |
} |
| 554 |
|
| 555 |
if (dtp->dev_physaddr) |
| 556 |
dest0 = dtp->dev_physaddr; |
| 557 |
|
| 558 |
#if 0 |
| 559 |
printk(KERN_DEBUG "did:%x sid:%x cmd0:%x cmd1:%x source0:%x " |
| 560 |
"source1:%x dest0:%x dest1:%x\n", |
| 561 |
dtp->dev_id, stp->dev_id, cmd0, cmd1, src0, |
| 562 |
src1, dest0, dest1); |
| 563 |
#endif |
| 564 |
for (i = 0; i < entries; i++) { |
| 565 |
dp->dscr_cmd0 = cmd0; |
| 566 |
dp->dscr_cmd1 = cmd1; |
| 567 |
dp->dscr_source0 = src0; |
| 568 |
dp->dscr_source1 = src1; |
| 569 |
dp->dscr_dest0 = dest0; |
| 570 |
dp->dscr_dest1 = dest1; |
| 571 |
dp->dscr_stat = 0; |
| 572 |
dp->sw_context = 0; |
| 573 |
dp->sw_status = 0; |
| 574 |
dp->dscr_nxtptr = DSCR_NXTPTR(virt_to_phys(dp + 1)); |
| 575 |
dp++; |
| 576 |
} |
| 577 |
|
| 578 |
/* Make last descriptor point to the first. */ |
| 579 |
dp--; |
| 580 |
dp->dscr_nxtptr = DSCR_NXTPTR(virt_to_phys(ctp->chan_desc_base)); |
| 581 |
ctp->get_ptr = ctp->put_ptr = ctp->cur_ptr = ctp->chan_desc_base; |
| 582 |
|
| 583 |
return (u32)ctp->chan_desc_base; |
| 584 |
} |
| 585 |
EXPORT_SYMBOL(au1xxx_dbdma_ring_alloc); |
| 586 |
|
| 587 |
/* |
| 588 |
* Put a source buffer into the DMA ring. |
| 589 |
* This updates the source pointer and byte count. Normally used |
| 590 |
* for memory to fifo transfers. |
| 591 |
*/ |
| 592 |
u32 au1xxx_dbdma_put_source(u32 chanid, dma_addr_t buf, int nbytes, u32 flags) |
| 593 |
{ |
| 594 |
chan_tab_t *ctp; |
| 595 |
au1x_ddma_desc_t *dp; |
| 596 |
|
| 597 |
/* |
| 598 |
* I guess we could check this to be within the |
| 599 |
* range of the table...... |
| 600 |
*/ |
| 601 |
ctp = *(chan_tab_t **)chanid; |
| 602 |
|
| 603 |
/* |
| 604 |
* We should have multiple callers for a particular channel, |
| 605 |
* an interrupt doesn't affect this pointer nor the descriptor, |
| 606 |
* so no locking should be needed. |
| 607 |
*/ |
| 608 |
dp = ctp->put_ptr; |
| 609 |
|
| 610 |
/* |
| 611 |
* If the descriptor is valid, we are way ahead of the DMA |
| 612 |
* engine, so just return an error condition. |
| 613 |
*/ |
| 614 |
if (dp->dscr_cmd0 & DSCR_CMD0_V) |
| 615 |
return 0; |
| 616 |
|
| 617 |
/* Load up buffer address and byte count. */ |
| 618 |
dp->dscr_source0 = buf & ~0UL; |
| 619 |
dp->dscr_cmd1 = nbytes; |
| 620 |
/* Check flags */ |
| 621 |
if (flags & DDMA_FLAGS_IE) |
| 622 |
dp->dscr_cmd0 |= DSCR_CMD0_IE; |
| 623 |
if (flags & DDMA_FLAGS_NOIE) |
| 624 |
dp->dscr_cmd0 &= ~DSCR_CMD0_IE; |
| 625 |
|
| 626 |
/* |
| 627 |
* There is an erratum on certain Au1200/Au1550 revisions that could |
| 628 |
* result in "stale" data being DMA'ed. It has to do with the snoop |
| 629 |
* logic on the cache eviction buffer. dma_default_coherent is set |
| 630 |
* to false on these parts. |
| 631 |
*/ |
| 632 |
if (!dma_default_coherent) |
| 633 |
dma_cache_wback_inv(KSEG0ADDR(buf), nbytes); |
| 634 |
dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */ |
| 635 |
wmb(); /* drain writebuffer */ |
| 636 |
dma_cache_wback_inv((unsigned long)dp, sizeof(*dp)); |
| 637 |
ctp->chan_ptr->ddma_dbell = 0; |
| 638 |
wmb(); /* force doorbell write out to dma engine */ |
| 639 |
|
| 640 |
/* Get next descriptor pointer. */ |
| 641 |
ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); |
| 642 |
|
| 643 |
/* Return something non-zero. */ |
| 644 |
return nbytes; |
| 645 |
} |
| 646 |
EXPORT_SYMBOL(au1xxx_dbdma_put_source); |
| 647 |
|
| 648 |
/* Put a destination buffer into the DMA ring. |
| 649 |
* This updates the destination pointer and byte count. Normally used |
| 650 |
* to place an empty buffer into the ring for fifo to memory transfers. |
| 651 |
*/ |
| 652 |
u32 au1xxx_dbdma_put_dest(u32 chanid, dma_addr_t buf, int nbytes, u32 flags) |
| 653 |
{ |
| 654 |
chan_tab_t *ctp; |
| 655 |
au1x_ddma_desc_t *dp; |
| 656 |
|
| 657 |
/* I guess we could check this to be within the |
| 658 |
* range of the table...... |
| 659 |
*/ |
| 660 |
ctp = *((chan_tab_t **)chanid); |
| 661 |
|
| 662 |
/* We should have multiple callers for a particular channel, |
| 663 |
* an interrupt doesn't affect this pointer nor the descriptor, |
| 664 |
* so no locking should be needed. |
| 665 |
*/ |
| 666 |
dp = ctp->put_ptr; |
| 667 |
|
| 668 |
/* If the descriptor is valid, we are way ahead of the DMA |
| 669 |
* engine, so just return an error condition. |
| 670 |
*/ |
| 671 |
if (dp->dscr_cmd0 & DSCR_CMD0_V) |
| 672 |
return 0; |
| 673 |
|
| 674 |
/* Load up buffer address and byte count */ |
| 675 |
|
| 676 |
/* Check flags */ |
| 677 |
if (flags & DDMA_FLAGS_IE) |
| 678 |
dp->dscr_cmd0 |= DSCR_CMD0_IE; |
| 679 |
if (flags & DDMA_FLAGS_NOIE) |
| 680 |
dp->dscr_cmd0 &= ~DSCR_CMD0_IE; |
| 681 |
|
| 682 |
dp->dscr_dest0 = buf & ~0UL; |
| 683 |
dp->dscr_cmd1 = nbytes; |
| 684 |
#if 0 |
| 685 |
printk(KERN_DEBUG "cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n", |
| 686 |
dp->dscr_cmd0, dp->dscr_cmd1, dp->dscr_source0, |
| 687 |
dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1); |
| 688 |
#endif |
| 689 |
/* |
| 690 |
* There is an erratum on certain Au1200/Au1550 revisions that could |
| 691 |
* result in "stale" data being DMA'ed. It has to do with the snoop |
| 692 |
* logic on the cache eviction buffer. dma_default_coherent is set |
| 693 |
* to false on these parts. |
| 694 |
*/ |
| 695 |
if (!dma_default_coherent) |
| 696 |
dma_cache_inv(KSEG0ADDR(buf), nbytes); |
| 697 |
dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */ |
| 698 |
wmb(); /* drain writebuffer */ |
| 699 |
dma_cache_wback_inv((unsigned long)dp, sizeof(*dp)); |
| 700 |
ctp->chan_ptr->ddma_dbell = 0; |
| 701 |
wmb(); /* force doorbell write out to dma engine */ |
| 702 |
|
| 703 |
/* Get next descriptor pointer. */ |
| 704 |
ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); |
| 705 |
|
| 706 |
/* Return something non-zero. */ |
| 707 |
return nbytes; |
| 708 |
} |
| 709 |
EXPORT_SYMBOL(au1xxx_dbdma_put_dest); |
| 710 |
|
| 711 |
/* |
| 712 |
* Get a destination buffer into the DMA ring. |
| 713 |
* Normally used to get a full buffer from the ring during fifo |
| 714 |
* to memory transfers. This does not set the valid bit, you will |
| 715 |
* have to put another destination buffer to keep the DMA going. |
| 716 |
*/ |
| 717 |
u32 au1xxx_dbdma_get_dest(u32 chanid, void **buf, int *nbytes) |
| 718 |
{ |
| 719 |
chan_tab_t *ctp; |
| 720 |
au1x_ddma_desc_t *dp; |
| 721 |
u32 rv; |
| 722 |
|
| 723 |
/* |
| 724 |
* I guess we could check this to be within the |
| 725 |
* range of the table...... |
| 726 |
*/ |
| 727 |
ctp = *((chan_tab_t **)chanid); |
| 728 |
|
| 729 |
/* |
| 730 |
* We should have multiple callers for a particular channel, |
| 731 |
* an interrupt doesn't affect this pointer nor the descriptor, |
| 732 |
* so no locking should be needed. |
| 733 |
*/ |
| 734 |
dp = ctp->get_ptr; |
| 735 |
|
| 736 |
/* |
| 737 |
* If the descriptor is valid, we are way ahead of the DMA |
| 738 |
* engine, so just return an error condition. |
| 739 |
*/ |
| 740 |
if (dp->dscr_cmd0 & DSCR_CMD0_V) |
| 741 |
return 0; |
| 742 |
|
| 743 |
/* Return buffer address and byte count. */ |
| 744 |
*buf = (void *)(phys_to_virt(dp->dscr_dest0)); |
| 745 |
*nbytes = dp->dscr_cmd1; |
| 746 |
rv = dp->dscr_stat; |
| 747 |
|
| 748 |
/* Get next descriptor pointer. */ |
| 749 |
ctp->get_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); |
| 750 |
|
| 751 |
/* Return something non-zero. */ |
| 752 |
return rv; |
| 753 |
} |
| 754 |
EXPORT_SYMBOL_GPL(au1xxx_dbdma_get_dest); |
| 755 |
|
| 756 |
void au1xxx_dbdma_stop(u32 chanid) |
| 757 |
{ |
| 758 |
chan_tab_t *ctp; |
| 759 |
au1x_dma_chan_t *cp; |
| 760 |
int halt_timeout = 0; |
| 761 |
|
| 762 |
ctp = *((chan_tab_t **)chanid); |
| 763 |
|
| 764 |
cp = ctp->chan_ptr; |
| 765 |
cp->ddma_cfg &= ~DDMA_CFG_EN; /* Disable channel */ |
| 766 |
wmb(); /* drain writebuffer */ |
| 767 |
while (!(cp->ddma_stat & DDMA_STAT_H)) { |
| 768 |
udelay(1); |
| 769 |
halt_timeout++; |
| 770 |
if (halt_timeout > 100) { |
| 771 |
printk(KERN_WARNING "warning: DMA channel won't halt\n"); |
| 772 |
break; |
| 773 |
} |
| 774 |
} |
| 775 |
/* clear current desc valid and doorbell */ |
| 776 |
cp->ddma_stat |= (DDMA_STAT_DB | DDMA_STAT_V); |
| 777 |
wmb(); /* drain writebuffer */ |
| 778 |
} |
| 779 |
EXPORT_SYMBOL(au1xxx_dbdma_stop); |
| 780 |
|
| 781 |
/* |
| 782 |
* Start using the current descriptor pointer. If the DBDMA encounters |
| 783 |
* a non-valid descriptor, it will stop. In this case, we can just |
| 784 |
* continue by adding a buffer to the list and starting again. |
| 785 |
*/ |
| 786 |
void au1xxx_dbdma_start(u32 chanid) |
| 787 |
{ |
| 788 |
chan_tab_t *ctp; |
| 789 |
au1x_dma_chan_t *cp; |
| 790 |
|
| 791 |
ctp = *((chan_tab_t **)chanid); |
| 792 |
cp = ctp->chan_ptr; |
| 793 |
cp->ddma_desptr = virt_to_phys(ctp->cur_ptr); |
| 794 |
cp->ddma_cfg |= DDMA_CFG_EN; /* Enable channel */ |
| 795 |
wmb(); /* drain writebuffer */ |
| 796 |
cp->ddma_dbell = 0; |
| 797 |
wmb(); /* drain writebuffer */ |
| 798 |
} |
| 799 |
EXPORT_SYMBOL(au1xxx_dbdma_start); |
| 800 |
|
| 801 |
void au1xxx_dbdma_reset(u32 chanid) |
| 802 |
{ |
| 803 |
chan_tab_t *ctp; |
| 804 |
au1x_ddma_desc_t *dp; |
| 805 |
|
| 806 |
au1xxx_dbdma_stop(chanid); |
| 807 |
|
| 808 |
ctp = *((chan_tab_t **)chanid); |
| 809 |
ctp->get_ptr = ctp->put_ptr = ctp->cur_ptr = ctp->chan_desc_base; |
| 810 |
|
| 811 |
/* Run through the descriptors and reset the valid indicator. */ |
| 812 |
dp = ctp->chan_desc_base; |
| 813 |
|
| 814 |
do { |
| 815 |
dp->dscr_cmd0 &= ~DSCR_CMD0_V; |
| 816 |
/* |
| 817 |
* Reset our software status -- this is used to determine |
| 818 |
* if a descriptor is in use by upper level software. Since |
| 819 |
* posting can reset 'V' bit. |
| 820 |
*/ |
| 821 |
dp->sw_status = 0; |
| 822 |
dp = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); |
| 823 |
} while (dp != ctp->chan_desc_base); |
| 824 |
} |
| 825 |
EXPORT_SYMBOL(au1xxx_dbdma_reset); |
| 826 |
|
| 827 |
u32 au1xxx_get_dma_residue(u32 chanid) |
| 828 |
{ |
| 829 |
chan_tab_t *ctp; |
| 830 |
au1x_dma_chan_t *cp; |
| 831 |
u32 rv; |
| 832 |
|
| 833 |
ctp = *((chan_tab_t **)chanid); |
| 834 |
cp = ctp->chan_ptr; |
| 835 |
|
| 836 |
/* This is only valid if the channel is stopped. */ |
| 837 |
rv = cp->ddma_bytecnt; |
| 838 |
wmb(); /* drain writebuffer */ |
| 839 |
|
| 840 |
return rv; |
| 841 |
} |
| 842 |
EXPORT_SYMBOL_GPL(au1xxx_get_dma_residue); |
| 843 |
|
| 844 |
void au1xxx_dbdma_chan_free(u32 chanid) |
| 845 |
{ |
| 846 |
chan_tab_t *ctp; |
| 847 |
dbdev_tab_t *stp, *dtp; |
| 848 |
|
| 849 |
ctp = *((chan_tab_t **)chanid); |
| 850 |
stp = ctp->chan_src; |
| 851 |
dtp = ctp->chan_dest; |
| 852 |
|
| 853 |
au1xxx_dbdma_stop(chanid); |
| 854 |
|
| 855 |
kfree((void *)ctp->cdb_membase); |
| 856 |
|
| 857 |
stp->dev_flags &= ~DEV_FLAGS_INUSE; |
| 858 |
dtp->dev_flags &= ~DEV_FLAGS_INUSE; |
| 859 |
chan_tab_ptr[ctp->chan_index] = NULL; |
| 860 |
|
| 861 |
kfree(ctp); |
| 862 |
} |
| 863 |
EXPORT_SYMBOL(au1xxx_dbdma_chan_free); |
| 864 |
|
| 865 |
static irqreturn_t dbdma_interrupt(int irq, void *dev_id) |
| 866 |
{ |
| 867 |
u32 intstat; |
| 868 |
u32 chan_index; |
| 869 |
chan_tab_t *ctp; |
| 870 |
au1x_ddma_desc_t *dp; |
| 871 |
au1x_dma_chan_t *cp; |
| 872 |
|
| 873 |
intstat = dbdma_gptr->ddma_intstat; |
| 874 |
wmb(); /* drain writebuffer */ |
| 875 |
chan_index = __ffs(intstat); |
| 876 |
|
| 877 |
ctp = chan_tab_ptr[chan_index]; |
| 878 |
cp = ctp->chan_ptr; |
| 879 |
dp = ctp->cur_ptr; |
| 880 |
|
| 881 |
/* Reset interrupt. */ |
| 882 |
cp->ddma_irq = 0; |
| 883 |
wmb(); /* drain writebuffer */ |
| 884 |
|
| 885 |
if (ctp->chan_callback) |
| 886 |
ctp->chan_callback(irq, ctp->chan_callparam); |
| 887 |
|
| 888 |
ctp->cur_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); |
| 889 |
return IRQ_RETVAL(1); |
| 890 |
} |
| 891 |
|
| 892 |
void au1xxx_dbdma_dump(u32 chanid) |
| 893 |
{ |
| 894 |
chan_tab_t *ctp; |
| 895 |
au1x_ddma_desc_t *dp; |
| 896 |
dbdev_tab_t *stp, *dtp; |
| 897 |
au1x_dma_chan_t *cp; |
| 898 |
u32 i = 0; |
| 899 |
|
| 900 |
ctp = *((chan_tab_t **)chanid); |
| 901 |
stp = ctp->chan_src; |
| 902 |
dtp = ctp->chan_dest; |
| 903 |
cp = ctp->chan_ptr; |
| 904 |
|
| 905 |
printk(KERN_DEBUG "Chan %x, stp %x (dev %d) dtp %x (dev %d)\n", |
| 906 |
(u32)ctp, (u32)stp, stp - dbdev_tab, (u32)dtp, |
| 907 |
dtp - dbdev_tab); |
| 908 |
printk(KERN_DEBUG "desc base %x, get %x, put %x, cur %x\n", |
| 909 |
(u32)(ctp->chan_desc_base), (u32)(ctp->get_ptr), |
| 910 |
(u32)(ctp->put_ptr), (u32)(ctp->cur_ptr)); |
| 911 |
|
| 912 |
printk(KERN_DEBUG "dbdma chan %x\n", (u32)cp); |
| 913 |
printk(KERN_DEBUG "cfg %08x, desptr %08x, statptr %08x\n", |
| 914 |
cp->ddma_cfg, cp->ddma_desptr, cp->ddma_statptr); |
| 915 |
printk(KERN_DEBUG "dbell %08x, irq %08x, stat %08x, bytecnt %08x\n", |
| 916 |
cp->ddma_dbell, cp->ddma_irq, cp->ddma_stat, |
| 917 |
cp->ddma_bytecnt); |
| 918 |
|
| 919 |
/* Run through the descriptors */ |
| 920 |
dp = ctp->chan_desc_base; |
| 921 |
|
| 922 |
do { |
| 923 |
printk(KERN_DEBUG "Dp[%d]= %08x, cmd0 %08x, cmd1 %08x\n", |
| 924 |
i++, (u32)dp, dp->dscr_cmd0, dp->dscr_cmd1); |
| 925 |
printk(KERN_DEBUG "src0 %08x, src1 %08x, dest0 %08x, dest1 %08x\n", |
| 926 |
dp->dscr_source0, dp->dscr_source1, |
| 927 |
dp->dscr_dest0, dp->dscr_dest1); |
| 928 |
printk(KERN_DEBUG "stat %08x, nxtptr %08x\n", |
| 929 |
dp->dscr_stat, dp->dscr_nxtptr); |
| 930 |
dp = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); |
| 931 |
} while (dp != ctp->chan_desc_base); |
| 932 |
} |
| 933 |
|
| 934 |
/* Put a descriptor into the DMA ring. |
| 935 |
* This updates the source/destination pointers and byte count. |
| 936 |
*/ |
| 937 |
u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr) |
| 938 |
{ |
| 939 |
chan_tab_t *ctp; |
| 940 |
au1x_ddma_desc_t *dp; |
| 941 |
u32 nbytes = 0; |
| 942 |
|
| 943 |
/* |
| 944 |
* I guess we could check this to be within the |
| 945 |
* range of the table...... |
| 946 |
*/ |
| 947 |
ctp = *((chan_tab_t **)chanid); |
| 948 |
|
| 949 |
/* |
| 950 |
* We should have multiple callers for a particular channel, |
| 951 |
* an interrupt doesn't affect this pointer nor the descriptor, |
| 952 |
* so no locking should be needed. |
| 953 |
*/ |
| 954 |
dp = ctp->put_ptr; |
| 955 |
|
| 956 |
/* |
| 957 |
* If the descriptor is valid, we are way ahead of the DMA |
| 958 |
* engine, so just return an error condition. |
| 959 |
*/ |
| 960 |
if (dp->dscr_cmd0 & DSCR_CMD0_V) |
| 961 |
return 0; |
| 962 |
|
| 963 |
/* Load up buffer addresses and byte count. */ |
| 964 |
dp->dscr_dest0 = dscr->dscr_dest0; |
| 965 |
dp->dscr_source0 = dscr->dscr_source0; |
| 966 |
dp->dscr_dest1 = dscr->dscr_dest1; |
| 967 |
dp->dscr_source1 = dscr->dscr_source1; |
| 968 |
dp->dscr_cmd1 = dscr->dscr_cmd1; |
| 969 |
nbytes = dscr->dscr_cmd1; |
| 970 |
/* Allow the caller to specify if an interrupt is generated */ |
| 971 |
dp->dscr_cmd0 &= ~DSCR_CMD0_IE; |
| 972 |
dp->dscr_cmd0 |= dscr->dscr_cmd0 | DSCR_CMD0_V; |
| 973 |
ctp->chan_ptr->ddma_dbell = 0; |
| 974 |
|
| 975 |
/* Get next descriptor pointer. */ |
| 976 |
ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); |
| 977 |
|
| 978 |
/* Return something non-zero. */ |
| 979 |
return nbytes; |
| 980 |
} |
| 981 |
|
| 982 |
|
| 983 |
static unsigned long alchemy_dbdma_pm_data[NUM_DBDMA_CHANS + 1][6]; |
| 984 |
|
| 985 |
static int alchemy_dbdma_suspend(void *data) |
| 986 |
{ |
| 987 |
int i; |
| 988 |
void __iomem *addr; |
| 989 |
|
| 990 |
addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR); |
| 991 |
alchemy_dbdma_pm_data[0][0] = __raw_readl(addr + 0x00); |
| 992 |
alchemy_dbdma_pm_data[0][1] = __raw_readl(addr + 0x04); |
| 993 |
alchemy_dbdma_pm_data[0][2] = __raw_readl(addr + 0x08); |
| 994 |
alchemy_dbdma_pm_data[0][3] = __raw_readl(addr + 0x0c); |
| 995 |
|
| 996 |
/* save channel configurations */ |
| 997 |
addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_PHYS_ADDR); |
| 998 |
for (i = 1; i <= NUM_DBDMA_CHANS; i++) { |
| 999 |
alchemy_dbdma_pm_data[i][0] = __raw_readl(addr + 0x00); |
| 1000 |
alchemy_dbdma_pm_data[i][1] = __raw_readl(addr + 0x04); |
| 1001 |
alchemy_dbdma_pm_data[i][2] = __raw_readl(addr + 0x08); |
| 1002 |
alchemy_dbdma_pm_data[i][3] = __raw_readl(addr + 0x0c); |
| 1003 |
alchemy_dbdma_pm_data[i][4] = __raw_readl(addr + 0x10); |
| 1004 |
alchemy_dbdma_pm_data[i][5] = __raw_readl(addr + 0x14); |
| 1005 |
|
| 1006 |
/* halt channel */ |
| 1007 |
__raw_writel(alchemy_dbdma_pm_data[i][0] & ~1, addr + 0x00); |
| 1008 |
wmb(); |
| 1009 |
while (!(__raw_readl(addr + 0x14) & 1)) |
| 1010 |
wmb(); |
| 1011 |
|
| 1012 |
addr += 0x100; /* next channel base */ |
| 1013 |
} |
| 1014 |
/* disable channel interrupts */ |
| 1015 |
addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR); |
| 1016 |
__raw_writel(0, addr + 0x0c); |
| 1017 |
wmb(); |
| 1018 |
|
| 1019 |
return 0; |
| 1020 |
} |
| 1021 |
|
| 1022 |
static void alchemy_dbdma_resume(void *data) |
| 1023 |
{ |
| 1024 |
int i; |
| 1025 |
void __iomem *addr; |
| 1026 |
|
| 1027 |
addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR); |
| 1028 |
__raw_writel(alchemy_dbdma_pm_data[0][0], addr + 0x00); |
| 1029 |
__raw_writel(alchemy_dbdma_pm_data[0][1], addr + 0x04); |
| 1030 |
__raw_writel(alchemy_dbdma_pm_data[0][2], addr + 0x08); |
| 1031 |
__raw_writel(alchemy_dbdma_pm_data[0][3], addr + 0x0c); |
| 1032 |
|
| 1033 |
/* restore channel configurations */ |
| 1034 |
addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_PHYS_ADDR); |
| 1035 |
for (i = 1; i <= NUM_DBDMA_CHANS; i++) { |
| 1036 |
__raw_writel(alchemy_dbdma_pm_data[i][0], addr + 0x00); |
| 1037 |
__raw_writel(alchemy_dbdma_pm_data[i][1], addr + 0x04); |
| 1038 |
__raw_writel(alchemy_dbdma_pm_data[i][2], addr + 0x08); |
| 1039 |
__raw_writel(alchemy_dbdma_pm_data[i][3], addr + 0x0c); |
| 1040 |
__raw_writel(alchemy_dbdma_pm_data[i][4], addr + 0x10); |
| 1041 |
__raw_writel(alchemy_dbdma_pm_data[i][5], addr + 0x14); |
| 1042 |
wmb(); |
| 1043 |
addr += 0x100; /* next channel base */ |
| 1044 |
} |
| 1045 |
} |
| 1046 |
|
| 1047 |
static const struct syscore_ops alchemy_dbdma_syscore_ops = { |
| 1048 |
.suspend = alchemy_dbdma_suspend, |
| 1049 |
.resume = alchemy_dbdma_resume, |
| 1050 |
}; |
| 1051 |
|
| 1052 |
static struct syscore alchemy_dbdma_syscore = { |
| 1053 |
.ops = &alchemy_dbdma_syscore_ops, |
| 1054 |
}; |
| 1055 |
|
| 1056 |
static int __init dbdma_setup(unsigned int irq, dbdev_tab_t *idtable) |
| 1057 |
{ |
| 1058 |
int ret; |
| 1059 |
|
| 1060 |
dbdev_tab = kzalloc_objs(dbdev_tab_t, DBDEV_TAB_SIZE); |
| 1061 |
if (!dbdev_tab) |
| 1062 |
return -ENOMEM; |
| 1063 |
|
| 1064 |
memcpy(dbdev_tab, idtable, 32 * sizeof(dbdev_tab_t)); |
| 1065 |
for (ret = 32; ret < DBDEV_TAB_SIZE; ret++) |
| 1066 |
dbdev_tab[ret].dev_id = ~0; |
| 1067 |
|
| 1068 |
dbdma_gptr->ddma_config = 0; |
| 1069 |
dbdma_gptr->ddma_throttle = 0; |
| 1070 |
dbdma_gptr->ddma_inten = 0xffff; |
| 1071 |
wmb(); /* drain writebuffer */ |
| 1072 |
|
| 1073 |
ret = request_irq(irq, dbdma_interrupt, 0, "dbdma", (void *)dbdma_gptr); |
| 1074 |
if (ret) |
| 1075 |
printk(KERN_ERR "Cannot grab DBDMA interrupt!\n"); |
| 1076 |
else { |
| 1077 |
dbdma_initialized = 1; |
| 1078 |
register_syscore(&alchemy_dbdma_syscore); |
| 1079 |
} |
| 1080 |
|
| 1081 |
return ret; |
| 1082 |
} |
| 1083 |
|
| 1084 |
static int __init alchemy_dbdma_init(void) |
| 1085 |
{ |
| 1086 |
switch (alchemy_get_cputype()) { |
| 1087 |
case ALCHEMY_CPU_AU1550: |
| 1088 |
return dbdma_setup(AU1550_DDMA_INT, au1550_dbdev_tab); |
| 1089 |
case ALCHEMY_CPU_AU1200: |
| 1090 |
return dbdma_setup(AU1200_DDMA_INT, au1200_dbdev_tab); |
| 1091 |
case ALCHEMY_CPU_AU1300: |
| 1092 |
return dbdma_setup(AU1300_DDMA_INT, au1300_dbdev_tab); |
| 1093 |
} |
| 1094 |
return 0; |
| 1095 |
} |
| 1096 |
subsys_initcall(alchemy_dbdma_init); |