| 1 |
.. SPDX-License-Identifier: GPL-2.0 |
| 2 |
|
| 3 |
How to set up the Technisat/B2C2 Flexcop devices |
| 4 |
================================================ |
| 5 |
|
| 6 |
.. note:: |
| 7 |
|
| 8 |
This documentation is outdated. |
| 9 |
|
| 10 |
Author: Uwe Bugla <[email protected]> August 2009 |
| 11 |
|
| 12 |
Find out what device you have |
| 13 |
----------------------------- |
| 14 |
|
| 15 |
Important Notice: The driver does NOT support Technisat USB 2 devices! |
| 16 |
|
| 17 |
First start your linux box with a shipped kernel: |
| 18 |
|
| 19 |
.. code-block:: none |
| 20 |
|
| 21 |
lspci -vvv for a PCI device (lsusb -vvv for an USB device) will show you for example: |
| 22 |
02:0b.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / |
| 23 |
Technisat SkyStar2 DVB card (rev 02) |
| 24 |
|
| 25 |
dmesg | grep frontend may show you for example: |
| 26 |
DVB: registering frontend 0 (Conexant CX24123/CX24109)... |
| 27 |
|
| 28 |
Kernel compilation: |
| 29 |
------------------- |
| 30 |
|
| 31 |
If the Flexcop / Technisat is the only DVB / TV / Radio device in your box |
| 32 |
get rid of unnecessary modules and check this one: |
| 33 |
|
| 34 |
``Multimedia support`` => ``Customise analog and hybrid tuner modules to build`` |
| 35 |
|
| 36 |
In this directory uncheck every driver which is activated there |
| 37 |
(except ``Simple tuner support`` for ATSC 3rd generation only -> see case 9 please). |
| 38 |
|
| 39 |
Then please activate: |
| 40 |
|
| 41 |
- Main module part: |
| 42 |
|
| 43 |
``Multimedia support`` => ``DVB/ATSC adapters`` => ``Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters`` |
| 44 |
|
| 45 |
#) => ``Technisat/B2C2 Air/Sky/Cable2PC PCI`` (PCI card) or |
| 46 |
#) => ``Technisat/B2C2 Air/Sky/Cable2PC USB`` (USB 1.1 adapter) |
| 47 |
and for troubleshooting purposes: |
| 48 |
#) => ``Enable debug for the B2C2 FlexCop drivers`` |
| 49 |
|
| 50 |
- Frontend / Tuner / Demodulator module part: |
| 51 |
|
| 52 |
``Multimedia support`` => ``DVB/ATSC adapters`` |
| 53 |
=> ``Customise the frontend modules to build`` ``Customise DVB frontends`` => |
| 54 |
|
| 55 |
- SkyStar DVB-S Revision 2.3: |
| 56 |
|
| 57 |
#) => ``Zarlink VP310/MT312/ZL10313 based`` |
| 58 |
#) => ``Generic I2C PLL based tuners`` |
| 59 |
|
| 60 |
- SkyStar DVB-S Revision 2.6: |
| 61 |
|
| 62 |
#) => ``ST STV0299 based`` |
| 63 |
#) => ``Generic I2C PLL based tuners`` |
| 64 |
|
| 65 |
- SkyStar DVB-S Revision 2.7: |
| 66 |
|
| 67 |
#) => ``Samsung S5H1420 based`` |
| 68 |
#) => ``Integrant ITD1000 Zero IF tuner for DVB-S/DSS`` |
| 69 |
#) => ``ISL6421 SEC controller`` |
| 70 |
|
| 71 |
- SkyStar DVB-S Revision 2.8: |
| 72 |
|
| 73 |
#) => ``Conexant CX24123 based`` |
| 74 |
#) => ``Conexant CX24113/CX24128 tuner for DVB-S/DSS`` |
| 75 |
#) => ``ISL6421 SEC controller`` |
| 76 |
|
| 77 |
- AirStar DVB-T card: |
| 78 |
|
| 79 |
#) => ``Zarlink MT352 based`` |
| 80 |
#) => ``Generic I2C PLL based tuners`` |
| 81 |
|
| 82 |
- CableStar DVB-C card: |
| 83 |
|
| 84 |
#) => ``ST STV0297 based`` |
| 85 |
#) => ``Generic I2C PLL based tuners`` |
| 86 |
|
| 87 |
- AirStar ATSC card 1st generation: |
| 88 |
|
| 89 |
#) => ``Broadcom BCM3510`` |
| 90 |
|
| 91 |
- AirStar ATSC card 2nd generation: |
| 92 |
|
| 93 |
#) => ``NxtWave Communications NXT2002/NXT2004 based`` |
| 94 |
#) => ``Generic I2C PLL based tuners`` |
| 95 |
|
| 96 |
- AirStar ATSC card 3rd generation: |
| 97 |
|
| 98 |
#) => ``LG Electronics LGDT3302/LGDT3303 based`` |
| 99 |
#) ``Multimedia support`` => ``Customise analog and hybrid tuner modules to build`` => ``Simple tuner support`` |
| 100 |
|