| 1 |
.. SPDX-License-Identifier: GPL-2.0 |
| 2 |
|
| 3 |
====================================== |
| 4 |
Avermedia DVB-T on BT878 Release Notes |
| 5 |
====================================== |
| 6 |
|
| 7 |
February 14th 2006 |
| 8 |
|
| 9 |
.. note:: |
| 10 |
|
| 11 |
Several other Avermedia devices are supported. For a more |
| 12 |
broader and updated content about that, please check: |
| 13 |
|
| 14 |
https://linuxtv.org/wiki/index.php/AVerMedia |
| 15 |
|
| 16 |
The Avermedia DVB-T |
| 17 |
~~~~~~~~~~~~~~~~~~~ |
| 18 |
|
| 19 |
The Avermedia DVB-T is a budget PCI DVB card. It has 3 inputs: |
| 20 |
|
| 21 |
* RF Tuner Input |
| 22 |
* Composite Video Input (RCA Jack) |
| 23 |
* SVIDEO Input (Mini-DIN) |
| 24 |
|
| 25 |
The RF Tuner Input is the input to the tuner module of the |
| 26 |
card. The Tuner is otherwise known as the "Frontend" . The |
| 27 |
Frontend of the Avermedia DVB-T is a Microtune 7202D. A timely |
| 28 |
post to the linux-dvb mailing list ascertained that the |
| 29 |
Microtune 7202D is supported by the sp887x driver which is |
| 30 |
found in the dvb-hw CVS module. |
| 31 |
|
| 32 |
The DVB-T card is based around the BT878 chip which is a very |
| 33 |
common multimedia bridge and often found on Analogue TV cards. |
| 34 |
There is no on-board MPEG2 decoder, which means that all MPEG2 |
| 35 |
decoding must be done in software, or if you have one, on an |
| 36 |
MPEG2 hardware decoding card or chipset. |
| 37 |
|
| 38 |
|
| 39 |
Getting the card going |
| 40 |
~~~~~~~~~~~~~~~~~~~~~~ |
| 41 |
|
| 42 |
At this stage, it has not been able to ascertain the |
| 43 |
functionality of the remaining device nodes in respect of the |
| 44 |
Avermedia DVBT. However, full functionality in respect of |
| 45 |
tuning, receiving and supplying the MPEG2 data stream is |
| 46 |
possible with the currently available versions of the driver. |
| 47 |
It may be possible that additional functionality is available |
| 48 |
from the card (i.e. viewing the additional analogue inputs |
| 49 |
that the card presents), but this has not been tested yet. If |
| 50 |
I get around to this, I'll update the document with whatever I |
| 51 |
find. |
| 52 |
|
| 53 |
To power up the card, load the following modules in the |
| 54 |
following order: |
| 55 |
|
| 56 |
* modprobe bttv (normally loaded automatically) |
| 57 |
* modprobe dvb-bt8xx (or place dvb-bt8xx in /etc/modules) |
| 58 |
|
| 59 |
Insertion of these modules into the running kernel will |
| 60 |
activate the appropriate DVB device nodes. It is then possible |
| 61 |
to start accessing the card with utilities such as scan, tzap, |
| 62 |
dvbstream etc. |
| 63 |
|
| 64 |
The frontend module sp887x.o, requires an external firmware. |
| 65 |
Please use the command "get_dvb_firmware sp887x" to download |
| 66 |
it. Then copy it to /usr/lib/hotplug/firmware or /lib/firmware/ |
| 67 |
(depending on configuration of firmware hotplug). |
| 68 |
|
| 69 |
Known Limitations |
| 70 |
~~~~~~~~~~~~~~~~~ |
| 71 |
|
| 72 |
At present I can say with confidence that the frontend tunes |
| 73 |
via /dev/dvb/adapter{x}/frontend0 and supplies an MPEG2 stream |
| 74 |
via /dev/dvb/adapter{x}/dvr0. I have not tested the |
| 75 |
functionality of any other part of the card yet. I will do so |
| 76 |
over time and update this document. |
| 77 |
|
| 78 |
There are some limitations in the i2c layer due to a returned |
| 79 |
error message inconsistency. Although this generates errors in |
| 80 |
dmesg and the system logs, it does not appear to affect the |
| 81 |
ability of the frontend to function correctly. |
| 82 |
|
| 83 |
Further Update |
| 84 |
~~~~~~~~~~~~~~ |
| 85 |
|
| 86 |
dvbstream and VideoLAN Client on windows works a treat with |
| 87 |
DVB, in fact this is currently serving as my main way of |
| 88 |
viewing DVB-T at the moment. Additionally, VLC is happily |
| 89 |
decoding HDTV signals, although the PC is dropping the odd |
| 90 |
frame here and there - I assume due to processing capability - |
| 91 |
as all the decoding is being done under windows in software. |
| 92 |
|
| 93 |
Many thanks to Nigel Pearson for the updates to this document |
| 94 |
since the recent revision of the driver. |