| 1 |
.. SPDX-License-Identifier: GPL-2.0 |
| 2 |
|
| 3 |
============================================ |
| 4 |
Raspberry Pi PiSP Camera Front End (rp1-cfe) |
| 5 |
============================================ |
| 6 |
|
| 7 |
The PiSP Camera Front End |
| 8 |
========================= |
| 9 |
|
| 10 |
The PiSP Camera Front End (CFE) is a module which combines a CSI-2 receiver with |
| 11 |
a simple ISP, called the Front End (FE). |
| 12 |
|
| 13 |
The CFE has four DMA engines and can write frames from four separate streams |
| 14 |
received from the CSI-2 to the memory. One of those streams can also be routed |
| 15 |
directly to the FE, which can do minimal image processing, write two versions |
| 16 |
(e.g. non-scaled and downscaled versions) of the received frames to memory and |
| 17 |
provide statistics of the received frames. |
| 18 |
|
| 19 |
The FE registers are documented in the `Raspberry Pi Image Signal Processor |
| 20 |
(ISP) Specification document |
| 21 |
<https://datasheets.raspberrypi.com/camera/raspberry-pi-image-signal-processor-specification.pdf>`_, |
| 22 |
and example code for FE can be found in `libpisp |
| 23 |
<https://github.com/raspberrypi/libpisp>`_. |
| 24 |
|
| 25 |
The rp1-cfe driver |
| 26 |
================== |
| 27 |
|
| 28 |
The Raspberry Pi PiSP Camera Front End (rp1-cfe) driver is located under |
| 29 |
drivers/media/platform/raspberrypi/rp1-cfe. It uses the `V4L2 API` to register |
| 30 |
a number of video capture and output devices, the `V4L2 subdev API` to register |
| 31 |
subdevices for the CSI-2 received and the FE that connects the video devices in |
| 32 |
a single media graph realized using the `Media Controller (MC) API`. |
| 33 |
|
| 34 |
The media topology registered by the `rp1-cfe` driver, in this particular |
| 35 |
example connected to an imx219 sensor, is the following one: |
| 36 |
|
| 37 |
.. _rp1-cfe-topology: |
| 38 |
|
| 39 |
.. kernel-figure:: raspberrypi-rp1-cfe.dot |
| 40 |
:alt: Diagram of an example media pipeline topology |
| 41 |
:align: center |
| 42 |
|
| 43 |
The media graph contains the following video device nodes: |
| 44 |
|
| 45 |
- rp1-cfe-csi2-ch0: capture device for the first CSI-2 stream |
| 46 |
- rp1-cfe-csi2-ch1: capture device for the second CSI-2 stream |
| 47 |
- rp1-cfe-csi2-ch2: capture device for the third CSI-2 stream |
| 48 |
- rp1-cfe-csi2-ch3: capture device for the fourth CSI-2 stream |
| 49 |
- rp1-cfe-fe-image0: capture device for the first FE output |
| 50 |
- rp1-cfe-fe-image1: capture device for the second FE output |
| 51 |
- rp1-cfe-fe-stats: capture device for the FE statistics |
| 52 |
- rp1-cfe-fe-config: output device for FE configuration |
| 53 |
|
| 54 |
rp1-cfe-csi2-chX |
| 55 |
---------------- |
| 56 |
|
| 57 |
The rp1-cfe-csi2-chX capture devices are normal V4L2 capture devices which |
| 58 |
can be used to capture video frames or metadata received from the CSI-2. |
| 59 |
|
| 60 |
rp1-cfe-fe-image0, rp1-cfe-fe-image1 |
| 61 |
------------------------------------ |
| 62 |
|
| 63 |
The rp1-cfe-fe-image0 and rp1-cfe-fe-image1 capture devices are used to write |
| 64 |
the processed frames to memory. |
| 65 |
|
| 66 |
rp1-cfe-fe-stats |
| 67 |
---------------- |
| 68 |
|
| 69 |
The format of the FE statistics buffer is defined by |
| 70 |
:c:type:`pisp_statistics` C structure and the meaning of each parameter is |
| 71 |
described in the `PiSP specification` document. |
| 72 |
|
| 73 |
rp1-cfe-fe-config |
| 74 |
----------------- |
| 75 |
|
| 76 |
The format of the FE configuration buffer is defined by |
| 77 |
:c:type:`pisp_fe_config` C structure and the meaning of each parameter is |
| 78 |
described in the `PiSP specification` document. |