| 1 |
.. SPDX-License-Identifier: GPL-2.0 |
| 2 |
|
| 3 |
.. include:: <isonum.txt> |
| 4 |
|
| 5 |
The Silicon Labs Si470x FM Radio Receivers driver |
| 6 |
================================================= |
| 7 |
|
| 8 |
Copyright |copy| 2009 Tobias Lorenz <[email protected]> |
| 9 |
|
| 10 |
|
| 11 |
Information from Silicon Labs |
| 12 |
----------------------------- |
| 13 |
|
| 14 |
Silicon Laboratories is the manufacturer of the radio ICs, that nowadays are the |
| 15 |
most often used radio receivers in cell phones. Usually they are connected with |
| 16 |
I2C. But SiLabs also provides a reference design, which integrates this IC, |
| 17 |
together with a small microcontroller C8051F321, to form a USB radio. |
| 18 |
Part of this reference design is also a radio application in binary and source |
| 19 |
code. The software also contains an automatic firmware upgrade to the most |
| 20 |
current version. Information on these can be downloaded here: |
| 21 |
http://www.silabs.com/usbradio |
| 22 |
|
| 23 |
|
| 24 |
Supported ICs |
| 25 |
------------- |
| 26 |
|
| 27 |
The following ICs have a very similar register set, so that they are or will be |
| 28 |
supported somewhen by the driver: |
| 29 |
|
| 30 |
- Si4700: FM radio receiver |
| 31 |
- Si4701: FM radio receiver, RDS Support |
| 32 |
- Si4702: FM radio receiver |
| 33 |
- Si4703: FM radio receiver, RDS Support |
| 34 |
- Si4704: FM radio receiver, no external antenna required |
| 35 |
- Si4705: FM radio receiver, no external antenna required, RDS support, Dig I/O |
| 36 |
- Si4706: Enhanced FM RDS/TMC radio receiver, no external antenna required, RDS |
| 37 |
Support |
| 38 |
- Si4707: Dedicated weather band radio receiver with SAME decoder, RDS Support |
| 39 |
- Si4708: Smallest FM receivers |
| 40 |
- Si4709: Smallest FM receivers, RDS Support |
| 41 |
|
| 42 |
More information on these can be downloaded here: |
| 43 |
http://www.silabs.com/products/mcu/Pages/USBFMRadioRD.aspx |
| 44 |
|
| 45 |
|
| 46 |
Supported USB devices |
| 47 |
--------------------- |
| 48 |
|
| 49 |
Currently the following USB radios (vendor:product) with the Silicon Labs si470x |
| 50 |
chips are known to work: |
| 51 |
|
| 52 |
- 10c4:818a: Silicon Labs USB FM Radio Reference Design |
| 53 |
- 06e1:a155: ADS/Tech FM Radio Receiver (formerly Instant FM Music) (RDX-155-EF) |
| 54 |
- 1b80:d700: KWorld USB FM Radio SnapMusic Mobile 700 (FM700) |
| 55 |
- 10c5:819a: Sanei Electric, Inc. FM USB Radio (sold as DealExtreme.com PCear) |
| 56 |
|
| 57 |
|
| 58 |
Software |
| 59 |
-------- |
| 60 |
|
| 61 |
Testing is usually done with most application under Debian/testing: |
| 62 |
|
| 63 |
- fmtools - Utility for managing FM tuner cards |
| 64 |
- gnomeradio - FM-radio tuner for the GNOME desktop |
| 65 |
- gradio - GTK FM radio tuner |
| 66 |
- kradio - Comfortable Radio Application for KDE |
| 67 |
- radio - ncurses-based radio application |
| 68 |
- mplayer - The Ultimate Movie Player For Linux |
| 69 |
- v4l2-ctl - Collection of command line video4linux utilities |
| 70 |
|
| 71 |
For example, you can use: |
| 72 |
|
| 73 |
.. code-block:: none |
| 74 |
|
| 75 |
v4l2-ctl -d /dev/radio0 --set-ctrl=volume=10,mute=0 --set-freq=95.21 --all |
| 76 |
|
| 77 |
There is also a library libv4l, which can be used. It's going to have a function |
| 78 |
for frequency seeking, either by using hardware functionality as in radio-si470x |
| 79 |
or by implementing a function as we currently have in every of the mentioned |
| 80 |
programs. Somewhen the radio programs should make use of libv4l. |
| 81 |
|
| 82 |
For processing RDS information, there is a project ongoing at: |
| 83 |
http://rdsd.berlios.de/ |
| 84 |
|
| 85 |
There is currently no project for making TMC sentences human readable. |
| 86 |
|
| 87 |
|
| 88 |
Audio Listing |
| 89 |
------------- |
| 90 |
|
| 91 |
USB Audio is provided by the ALSA snd_usb_audio module. It is recommended to |
| 92 |
also select SND_USB_AUDIO, as this is required to get sound from the radio. For |
| 93 |
listing you have to redirect the sound, for example using one of the following |
| 94 |
commands. Please adjust the audio devices to your needs (/dev/dsp* and hw:x,x). |
| 95 |
|
| 96 |
If you just want to test audio (very poor quality): |
| 97 |
|
| 98 |
.. code-block:: none |
| 99 |
|
| 100 |
cat /dev/dsp1 > /dev/dsp |
| 101 |
|
| 102 |
If you use sox + OSS try: |
| 103 |
|
| 104 |
.. code-block:: none |
| 105 |
|
| 106 |
sox -2 --endian little -r 96000 -t oss /dev/dsp1 -t oss /dev/dsp |
| 107 |
|
| 108 |
or using sox + alsa: |
| 109 |
|
| 110 |
.. code-block:: none |
| 111 |
|
| 112 |
sox --endian little -c 2 -S -r 96000 -t alsa hw:1 -t alsa -r 96000 hw:0 |
| 113 |
|
| 114 |
If you use arts try: |
| 115 |
|
| 116 |
.. code-block:: none |
| 117 |
|
| 118 |
arecord -D hw:1,0 -r96000 -c2 -f S16_LE | artsdsp aplay -B - |
| 119 |
|
| 120 |
If you use mplayer try: |
| 121 |
|
| 122 |
.. code-block:: none |
| 123 |
|
| 124 |
mplayer -radio adevice=hw=1.0:arate=96000 \ |
| 125 |
-rawaudio rate=96000 \ |
| 126 |
radio://<frequency>/capture |
| 127 |
|
| 128 |
Module Parameters |
| 129 |
----------------- |
| 130 |
|
| 131 |
After loading the module, you still have access to some of them in the sysfs |
| 132 |
mount under /sys/module/radio_si470x/parameters. The contents of read-only files |
| 133 |
(0444) are not updated, even if space, band and de are changed using private |
| 134 |
video controls. The others are runtime changeable. |
| 135 |
|
| 136 |
|
| 137 |
Errors |
| 138 |
------ |
| 139 |
|
| 140 |
Increase tune_timeout, if you often get -EIO errors. |
| 141 |
|
| 142 |
When timed out or band limit is reached, hw_freq_seek returns -EAGAIN. |
| 143 |
|
| 144 |
If you get any errors from snd_usb_audio, please report them to the ALSA people. |
| 145 |
|
| 146 |
|
| 147 |
Open Issues |
| 148 |
----------- |
| 149 |
|
| 150 |
V4L minor device allocation and parameter setting is not perfect. A solution is |
| 151 |
currently under discussion. |
| 152 |
|
| 153 |
There is an USB interface for downloading/uploading new firmware images. Support |
| 154 |
for it can be implemented using the request_firmware interface. |
| 155 |
|
| 156 |
There is a RDS interrupt mode. The driver is already using the same interface |
| 157 |
for polling RDS information, but is currently not using the interrupt mode. |
| 158 |
|
| 159 |
There is a LED interface, which can be used to override the LED control |
| 160 |
programmed in the firmware. This can be made available using the LED support |
| 161 |
functions in the kernel. |
| 162 |
|
| 163 |
|
| 164 |
Other useful information and links |
| 165 |
---------------------------------- |
| 166 |
|
| 167 |
http://www.silabs.com/usbradio |