| 1 |
.. SPDX-License-Identifier: GPL-2.0 |
| 2 |
|
| 3 |
The ivtv driver |
| 4 |
=============== |
| 5 |
|
| 6 |
Author: Hans Verkuil <[email protected]> |
| 7 |
|
| 8 |
This is a v4l2 device driver for the Conexant cx23415/6 MPEG encoder/decoder. |
| 9 |
The cx23415 can do both encoding and decoding, the cx23416 can only do MPEG |
| 10 |
encoding. Currently the only card featuring full decoding support is the |
| 11 |
Hauppauge PVR-350. |
| 12 |
|
| 13 |
.. note:: |
| 14 |
|
| 15 |
#) This driver requires the latest encoder firmware (version 2.06.039, size |
| 16 |
376836 bytes). Get the firmware from here: |
| 17 |
|
| 18 |
https://linuxtv.org/downloads/firmware/#conexant |
| 19 |
|
| 20 |
#) 'normal' TV applications do not work with this driver, you need |
| 21 |
an application that can handle MPEG input such as mplayer, xine, MythTV, |
| 22 |
etc. |
| 23 |
|
| 24 |
The primary goal of the IVTV project is to provide a "clean room" Linux |
| 25 |
Open Source driver implementation for video capture cards based on the |
| 26 |
iCompression iTVC15 or Conexant CX23415/CX23416 MPEG Codec. |
| 27 |
|
| 28 |
Features |
| 29 |
-------- |
| 30 |
|
| 31 |
* Hardware mpeg2 capture of broadcast video (and sound) via the tuner or |
| 32 |
S-Video/Composite and audio line-in. |
| 33 |
* Hardware mpeg2 capture of FM radio where hardware support exists |
| 34 |
* Supports NTSC, PAL, SECAM with stereo sound |
| 35 |
* Supports SAP and bilingual transmissions. |
| 36 |
* Supports raw VBI (closed captions and teletext). |
| 37 |
* Supports sliced VBI (closed captions and teletext) and is able to insert |
| 38 |
this into the captured MPEG stream. |
| 39 |
* Supports raw YUV and PCM input. |
| 40 |
|
| 41 |
Additional features for the PVR-350 (CX23415 based) |
| 42 |
--------------------------------------------------- |
| 43 |
|
| 44 |
* Provides hardware mpeg2 playback |
| 45 |
* Provides comprehensive OSD (On Screen Display: ie. graphics overlaying the |
| 46 |
video signal) |
| 47 |
* Provides a framebuffer (allowing X applications to appear on the video |
| 48 |
device) |
| 49 |
* Supports raw YUV output. |
| 50 |
|
| 51 |
IMPORTANT: In case of problems first read this page: |
| 52 |
https://help.ubuntu.com/community/Install_IVTV_Troubleshooting |
| 53 |
|
| 54 |
See also |
| 55 |
-------- |
| 56 |
|
| 57 |
https://linuxtv.org |
| 58 |
|
| 59 |
IRC |
| 60 |
--- |
| 61 |
|
| 62 |
irc://irc.freenode.net/#v4l |
| 63 |
|
| 64 |
---------------------------------------------------------- |
| 65 |
|
| 66 |
Devices |
| 67 |
------- |
| 68 |
|
| 69 |
A maximum of 12 ivtv boards are allowed at the moment. |
| 70 |
|
| 71 |
Cards that don't have a video output capability (i.e. non PVR350 cards) |
| 72 |
lack the vbi8, vbi16, video16 and video48 devices. They also do not |
| 73 |
support the framebuffer device /dev/fbx for OSD. |
| 74 |
|
| 75 |
The radio0 device may or may not be present, depending on whether the |
| 76 |
card has a radio tuner or not. |
| 77 |
|
| 78 |
Here is a list of the base v4l devices: |
| 79 |
|
| 80 |
.. code-block:: none |
| 81 |
|
| 82 |
crw-rw---- 1 root video 81, 0 Jun 19 22:22 /dev/video0 |
| 83 |
crw-rw---- 1 root video 81, 16 Jun 19 22:22 /dev/video16 |
| 84 |
crw-rw---- 1 root video 81, 24 Jun 19 22:22 /dev/video24 |
| 85 |
crw-rw---- 1 root video 81, 32 Jun 19 22:22 /dev/video32 |
| 86 |
crw-rw---- 1 root video 81, 48 Jun 19 22:22 /dev/video48 |
| 87 |
crw-rw---- 1 root video 81, 64 Jun 19 22:22 /dev/radio0 |
| 88 |
crw-rw---- 1 root video 81, 224 Jun 19 22:22 /dev/vbi0 |
| 89 |
crw-rw---- 1 root video 81, 228 Jun 19 22:22 /dev/vbi8 |
| 90 |
crw-rw---- 1 root video 81, 232 Jun 19 22:22 /dev/vbi16 |
| 91 |
|
| 92 |
Base devices |
| 93 |
------------ |
| 94 |
|
| 95 |
For every extra card you have the numbers increased by one. For example, |
| 96 |
/dev/video0 is listed as the 'base' encoding capture device so we have: |
| 97 |
|
| 98 |
- /dev/video0 is the encoding capture device for the first card (card 0) |
| 99 |
- /dev/video1 is the encoding capture device for the second card (card 1) |
| 100 |
- /dev/video2 is the encoding capture device for the third card (card 2) |
| 101 |
|
| 102 |
Note that if the first card doesn't have a feature (eg no decoder, so no |
| 103 |
video16, the second card will still use video17. The simple rule is 'add |
| 104 |
the card number to the base device number'. If you have other capture |
| 105 |
cards (e.g. WinTV PCI) that are detected first, then you have to tell |
| 106 |
the ivtv module about it so that it will start counting at 1 (or 2, or |
| 107 |
whatever). Otherwise the device numbers can get confusing. The ivtv |
| 108 |
'ivtv_first_minor' module option can be used for that. |
| 109 |
|
| 110 |
|
| 111 |
- /dev/video0 |
| 112 |
|
| 113 |
The encoding capture device(s). |
| 114 |
|
| 115 |
Read-only. |
| 116 |
|
| 117 |
Reading from this device gets you the MPEG1/2 program stream. |
| 118 |
Example: |
| 119 |
|
| 120 |
.. code-block:: none |
| 121 |
|
| 122 |
cat /dev/video0 > my.mpg (you need to hit ctrl-c to exit) |
| 123 |
|
| 124 |
|
| 125 |
- /dev/video16 |
| 126 |
|
| 127 |
The decoder output device(s) |
| 128 |
|
| 129 |
Write-only. Only present if the MPEG decoder (i.e. CX23415) exists. |
| 130 |
|
| 131 |
An mpeg2 stream sent to this device will appear on the selected video |
| 132 |
display, audio will appear on the line-out/audio out. It is only |
| 133 |
available for cards that support video out. Example: |
| 134 |
|
| 135 |
.. code-block:: none |
| 136 |
|
| 137 |
cat my.mpg >/dev/video16 |
| 138 |
|
| 139 |
|
| 140 |
- /dev/video24 |
| 141 |
|
| 142 |
The raw audio capture device(s). |
| 143 |
|
| 144 |
Read-only |
| 145 |
|
| 146 |
The raw audio PCM stereo stream from the currently selected |
| 147 |
tuner or audio line-in. Reading from this device results in a raw |
| 148 |
(signed 16 bit Little Endian, 48000 Hz, stereo pcm) capture. |
| 149 |
This device only captures audio. This should be replaced by an ALSA |
| 150 |
device in the future. |
| 151 |
Note that there is no corresponding raw audio output device, this is |
| 152 |
not supported in the decoder firmware. |
| 153 |
|
| 154 |
|
| 155 |
- /dev/video32 |
| 156 |
|
| 157 |
The raw video capture device(s) |
| 158 |
|
| 159 |
Read-only |
| 160 |
|
| 161 |
The raw YUV video output from the current video input. The YUV format |
| 162 |
is a 16x16 linear tiled NV12 format (V4L2_PIX_FMT_NV12_16L16) |
| 163 |
|
| 164 |
Note that the YUV and PCM streams are not synchronized, so they are of |
| 165 |
limited use. |
| 166 |
|
| 167 |
|
| 168 |
- /dev/video48 |
| 169 |
|
| 170 |
The raw video display device(s) |
| 171 |
|
| 172 |
Write-only. Only present if the MPEG decoder (i.e. CX23415) exists. |
| 173 |
|
| 174 |
Writes a YUV stream to the decoder of the card. |
| 175 |
|
| 176 |
|
| 177 |
- /dev/radio0 |
| 178 |
|
| 179 |
The radio tuner device(s) |
| 180 |
|
| 181 |
Cannot be read or written. |
| 182 |
|
| 183 |
Used to enable the radio tuner and tune to a frequency. You cannot |
| 184 |
read or write audio streams with this device. Once you use this |
| 185 |
device to tune the radio, use /dev/video24 to read the raw pcm stream |
| 186 |
or /dev/video0 to get an mpeg2 stream with black video. |
| 187 |
|
| 188 |
|
| 189 |
- /dev/vbi0 |
| 190 |
|
| 191 |
The 'vertical blank interval' (Teletext, CC, WSS etc) capture device(s) |
| 192 |
|
| 193 |
Read-only |
| 194 |
|
| 195 |
Captures the raw (or sliced) video data sent during the Vertical Blank |
| 196 |
Interval. This data is used to encode teletext, closed captions, VPS, |
| 197 |
widescreen signalling, electronic program guide information, and other |
| 198 |
services. |
| 199 |
|
| 200 |
|
| 201 |
- /dev/vbi8 |
| 202 |
|
| 203 |
Processed vbi feedback device(s) |
| 204 |
|
| 205 |
Read-only. Only present if the MPEG decoder (i.e. CX23415) exists. |
| 206 |
|
| 207 |
The sliced VBI data embedded in an MPEG stream is reproduced on this |
| 208 |
device. So while playing back a recording on /dev/video16, you can |
| 209 |
read the embedded VBI data from /dev/vbi8. |
| 210 |
|
| 211 |
|
| 212 |
- /dev/vbi16 |
| 213 |
|
| 214 |
The vbi 'display' device(s) |
| 215 |
|
| 216 |
Write-only. Only present if the MPEG decoder (i.e. CX23415) exists. |
| 217 |
|
| 218 |
Can be used to send sliced VBI data to the video-out connector. |