Debian Codegraph @

doc/man/nvme_status_field.2

raw
1 .TH "libnvme" 9 "enum nvme_status_field" "November 2025" "API Manual" LINUX
2 .SH NAME
3 enum nvme_status_field \- Defines all parts of the nvme status field: status code, status code type, and additional flags.
4 .SH SYNOPSIS
5 enum nvme_status_field {
6 .br
7 .BI " NVME_SCT_GENERIC"
8 ,
9 .br
10 .br
11 .BI " NVME_SCT_CMD_SPECIFIC"
12 ,
13 .br
14 .br
15 .BI " NVME_SCT_MEDIA"
16 ,
17 .br
18 .br
19 .BI " NVME_SCT_PATH"
20 ,
21 .br
22 .br
23 .BI " NVME_SCT_VS"
24 ,
25 .br
26 .br
27 .BI " NVME_SCT_MASK"
28 ,
29 .br
30 .br
31 .BI " NVME_SCT_SHIFT"
32 ,
33 .br
34 .br
35 .BI " NVME_SC_MASK"
36 ,
37 .br
38 .br
39 .BI " NVME_SC_SHIFT"
40 ,
41 .br
42 .br
43 .BI " NVME_SC_SUCCESS"
44 ,
45 .br
46 .br
47 .BI " NVME_SC_INVALID_OPCODE"
48 ,
49 .br
50 .br
51 .BI " NVME_SC_INVALID_FIELD"
52 ,
53 .br
54 .br
55 .BI " NVME_SC_CMDID_CONFLICT"
56 ,
57 .br
58 .br
59 .BI " NVME_SC_DATA_XFER_ERROR"
60 ,
61 .br
62 .br
63 .BI " NVME_SC_POWER_LOSS"
64 ,
65 .br
66 .br
67 .BI " NVME_SC_INTERNAL"
68 ,
69 .br
70 .br
71 .BI " NVME_SC_ABORT_REQ"
72 ,
73 .br
74 .br
75 .BI " NVME_SC_ABORT_QUEUE"
76 ,
77 .br
78 .br
79 .BI " NVME_SC_FUSED_FAIL"
80 ,
81 .br
82 .br
83 .BI " NVME_SC_FUSED_MISSING"
84 ,
85 .br
86 .br
87 .BI " NVME_SC_INVALID_NS"
88 ,
89 .br
90 .br
91 .BI " NVME_SC_CMD_SEQ_ERROR"
92 ,
93 .br
94 .br
95 .BI " NVME_SC_SGL_INVALID_LAST"
96 ,
97 .br
98 .br
99 .BI " NVME_SC_SGL_INVALID_COUNT"
100 ,
101 .br
102 .br
103 .BI " NVME_SC_SGL_INVALID_DATA"
104 ,
105 .br
106 .br
107 .BI " NVME_SC_SGL_INVALID_METADATA"
108 ,
109 .br
110 .br
111 .BI " NVME_SC_SGL_INVALID_TYPE"
112 ,
113 .br
114 .br
115 .BI " NVME_SC_CMB_INVALID_USE"
116 ,
117 .br
118 .br
119 .BI " NVME_SC_PRP_INVALID_OFFSET"
120 ,
121 .br
122 .br
123 .BI " NVME_SC_AWU_EXCEEDED"
124 ,
125 .br
126 .br
127 .BI " NVME_SC_OP_DENIED"
128 ,
129 .br
130 .br
131 .BI " NVME_SC_SGL_INVALID_OFFSET"
132 ,
133 .br
134 .br
135 .BI " NVME_SC_HOSTID_FORMAT"
136 ,
137 .br
138 .br
139 .BI " NVME_SC_KAT_EXPIRED"
140 ,
141 .br
142 .br
143 .BI " NVME_SC_KAT_INVALID"
144 ,
145 .br
146 .br
147 .BI " NVME_SC_CMD_ABORTED_PREMEPT"
148 ,
149 .br
150 .br
151 .BI " NVME_SC_SANITIZE_FAILED"
152 ,
153 .br
154 .br
155 .BI " NVME_SC_SANITIZE_IN_PROGRESS"
156 ,
157 .br
158 .br
159 .BI " NVME_SC_SGL_INVALID_GRANULARITY"
160 ,
161 .br
162 .br
163 .BI " NVME_SC_CMD_IN_CMBQ_NOT_SUPP"
164 ,
165 .br
166 .br
167 .BI " NVME_SC_NS_WRITE_PROTECTED"
168 ,
169 .br
170 .br
171 .BI " NVME_SC_CMD_INTERRUPTED"
172 ,
173 .br
174 .br
175 .BI " NVME_SC_TRAN_TPORT_ERROR"
176 ,
177 .br
178 .br
179 .BI " NVME_SC_PROHIBITED_BY_CMD_AND_FEAT"
180 ,
181 .br
182 .br
183 .BI " NVME_SC_ADMIN_CMD_MEDIA_NOT_READY"
184 ,
185 .br
186 .br
187 .BI " NVME_SC_INVALID_KEY_TAG"
188 ,
189 .br
190 .br
191 .BI " NVME_SC_HOST_DISPERSED_NS_NOT_ENABLED"
192 ,
193 .br
194 .br
195 .BI " NVME_SC_HOST_ID_NOT_INITIALIZED"
196 ,
197 .br
198 .br
199 .BI " NVME_SC_INCORRECT_KEY"
200 ,
201 .br
202 .br
203 .BI " NVME_SC_FDP_DISABLED"
204 ,
205 .br
206 .br
207 .BI " NVME_SC_INVALID_PLACEMENT_HANDLE_LIST"
208 ,
209 .br
210 .br
211 .BI " NVME_SC_LBA_RANGE"
212 ,
213 .br
214 .br
215 .BI " NVME_SC_CAP_EXCEEDED"
216 ,
217 .br
218 .br
219 .BI " NVME_SC_NS_NOT_READY"
220 ,
221 .br
222 .br
223 .BI " NVME_SC_RESERVATION_CONFLICT"
224 ,
225 .br
226 .br
227 .BI " NVME_SC_FORMAT_IN_PROGRESS"
228 ,
229 .br
230 .br
231 .BI " NVME_SC_INVALID_VALUE_SIZE"
232 ,
233 .br
234 .br
235 .BI " NVME_SC_INVALID_KEY_SIZE"
236 ,
237 .br
238 .br
239 .BI " NVME_SC_KV_KEY_NOT_EXISTS"
240 ,
241 .br
242 .br
243 .BI " NVME_SC_UNRECOVERED_ERROR"
244 ,
245 .br
246 .br
247 .BI " NVME_SC_KEY_EXISTS"
248 ,
249 .br
250 .br
251 .BI " NVME_SC_CQ_INVALID"
252 ,
253 .br
254 .br
255 .BI " NVME_SC_QID_INVALID"
256 ,
257 .br
258 .br
259 .BI " NVME_SC_QUEUE_SIZE"
260 ,
261 .br
262 .br
263 .BI " NVME_SC_ABORT_LIMIT"
264 ,
265 .br
266 .br
267 .BI " NVME_SC_ABORT_MISSING"
268 ,
269 .br
270 .br
271 .BI " NVME_SC_ASYNC_LIMIT"
272 ,
273 .br
274 .br
275 .BI " NVME_SC_FIRMWARE_SLOT"
276 ,
277 .br
278 .br
279 .BI " NVME_SC_FIRMWARE_IMAGE"
280 ,
281 .br
282 .br
283 .BI " NVME_SC_INVALID_VECTOR"
284 ,
285 .br
286 .br
287 .BI " NVME_SC_INVALID_LOG_PAGE"
288 ,
289 .br
290 .br
291 .BI " NVME_SC_INVALID_FORMAT"
292 ,
293 .br
294 .br
295 .BI " NVME_SC_FW_NEEDS_CONV_RESET"
296 ,
297 .br
298 .br
299 .BI " NVME_SC_INVALID_QUEUE"
300 ,
301 .br
302 .br
303 .BI " NVME_SC_FEATURE_NOT_SAVEABLE"
304 ,
305 .br
306 .br
307 .BI " NVME_SC_FEATURE_NOT_CHANGEABLE"
308 ,
309 .br
310 .br
311 .BI " NVME_SC_FEATURE_NOT_PER_NS"
312 ,
313 .br
314 .br
315 .BI " NVME_SC_FW_NEEDS_SUBSYS_RESET"
316 ,
317 .br
318 .br
319 .BI " NVME_SC_FW_NEEDS_RESET"
320 ,
321 .br
322 .br
323 .BI " NVME_SC_FW_NEEDS_MAX_TIME"
324 ,
325 .br
326 .br
327 .BI " NVME_SC_FW_ACTIVATE_PROHIBITED"
328 ,
329 .br
330 .br
331 .BI " NVME_SC_OVERLAPPING_RANGE"
332 ,
333 .br
334 .br
335 .BI " NVME_SC_NS_INSUFFICIENT_CAP"
336 ,
337 .br
338 .br
339 .BI " NVME_SC_NS_ID_UNAVAILABLE"
340 ,
341 .br
342 .br
343 .BI " NVME_SC_NS_ALREADY_ATTACHED"
344 ,
345 .br
346 .br
347 .BI " NVME_SC_NS_IS_PRIVATE"
348 ,
349 .br
350 .br
351 .BI " NVME_SC_NS_NOT_ATTACHED"
352 ,
353 .br
354 .br
355 .BI " NVME_SC_THIN_PROV_NOT_SUPP"
356 ,
357 .br
358 .br
359 .BI " NVME_SC_CTRL_LIST_INVALID"
360 ,
361 .br
362 .br
363 .BI " NVME_SC_SELF_TEST_IN_PROGRESS"
364 ,
365 .br
366 .br
367 .BI " NVME_SC_BP_WRITE_PROHIBITED"
368 ,
369 .br
370 .br
371 .BI " NVME_SC_INVALID_CTRL_ID"
372 ,
373 .br
374 .br
375 .BI " NVME_SC_INVALID_SEC_CTRL_STATE"
376 ,
377 .br
378 .br
379 .BI " NVME_SC_INVALID_CTRL_RESOURCES"
380 ,
381 .br
382 .br
383 .BI " NVME_SC_INVALID_RESOURCE_ID"
384 ,
385 .br
386 .br
387 .BI " NVME_SC_PMR_SAN_PROHIBITED"
388 ,
389 .br
390 .br
391 .BI " NVME_SC_ANA_GROUP_ID_INVALID"
392 ,
393 .br
394 .br
395 .BI " NVME_SC_ANA_ATTACH_FAILED"
396 ,
397 .br
398 .br
399 .BI " NVME_SC_INSUFFICIENT_CAP"
400 ,
401 .br
402 .br
403 .BI " NVME_SC_NS_ATTACHMENT_LIMIT_EXCEEDED"
404 ,
405 .br
406 .br
407 .BI " NVME_SC_PROHIBIT_CMD_EXEC_NOT_SUPPORTED"
408 ,
409 .br
410 .br
411 .BI " NVME_SC_IOCS_NOT_SUPPORTED"
412 ,
413 .br
414 .br
415 .BI " NVME_SC_IOCS_NOT_ENABLED"
416 ,
417 .br
418 .br
419 .BI " NVME_SC_IOCS_COMBINATION_REJECTED"
420 ,
421 .br
422 .br
423 .BI " NVME_SC_INVALID_IOCS"
424 ,
425 .br
426 .br
427 .BI " NVME_SC_ID_UNAVAILABLE"
428 ,
429 .br
430 .br
431 .BI " NVME_SC_INVALID_DISCOVERY_INFO"
432 ,
433 .br
434 .br
435 .BI " NVME_SC_ZONING_DATA_STRUCT_LOCKED"
436 ,
437 .br
438 .br
439 .BI " NVME_SC_ZONING_DATA_STRUCT_NOTFND"
440 ,
441 .br
442 .br
443 .BI " NVME_SC_INSUFFICIENT_DISC_RES"
444 ,
445 .br
446 .br
447 .BI " NVME_SC_REQSTD_FUNCTION_DISABLED"
448 ,
449 .br
450 .br
451 .BI " NVME_SC_ZONEGRP_ORIGINATOR_INVLD"
452 ,
453 .br
454 .br
455 .BI " NVME_SC_INVALID_CONTROLER_DATA_QUEUE"
456 ,
457 .br
458 .br
459 .BI " NVME_SC_NOT_ENOUGH_RESOURCES"
460 ,
461 .br
462 .br
463 .BI " NVME_SC_CONTROLLER_SUSPENDED"
464 ,
465 .br
466 .br
467 .BI " NVME_SC_CONTROLLER_NOT_SUSPENDED"
468 ,
469 .br
470 .br
471 .BI " NVME_SC_CONTROLLER_DATA_QUEUE_FULL"
472 ,
473 .br
474 .br
475 .BI " NVME_SC_BAD_ATTRIBUTES"
476 ,
477 .br
478 .br
479 .BI " NVME_SC_INVALID_PI"
480 ,
481 .br
482 .br
483 .BI " NVME_SC_READ_ONLY"
484 ,
485 .br
486 .br
487 .BI " NVME_SC_CMD_SIZE_LIMIT_EXCEEDED"
488 ,
489 .br
490 .br
491 .BI " NVME_SC_INCOMPATIBLE_NS"
492 ,
493 .br
494 .br
495 .BI " NVME_SC_FAST_COPY_NOT_POSSIBLE"
496 ,
497 .br
498 .br
499 .BI " NVME_SC_OVERLAPPING_IO_RANGE"
500 ,
501 .br
502 .br
503 .BI " NVME_SC_INSUFFICIENT_RESOURCES"
504 ,
505 .br
506 .br
507 .BI " NVME_SC_CONNECT_FORMAT"
508 ,
509 .br
510 .br
511 .BI " NVME_SC_CONNECT_CTRL_BUSY"
512 ,
513 .br
514 .br
515 .BI " NVME_SC_CONNECT_INVALID_PARAM"
516 ,
517 .br
518 .br
519 .BI " NVME_SC_CONNECT_RESTART_DISC"
520 ,
521 .br
522 .br
523 .BI " NVME_SC_CONNECT_INVALID_HOST"
524 ,
525 .br
526 .br
527 .BI " NVME_SC_DISCONNECT_INVALID_QTYPE"
528 ,
529 .br
530 .br
531 .BI " NVME_SC_DISCOVERY_RESTART"
532 ,
533 .br
534 .br
535 .BI " NVME_SC_AUTH_REQUIRED"
536 ,
537 .br
538 .br
539 .BI " NVME_SC_ZNS_INVALID_OP_REQUEST"
540 ,
541 .br
542 .br
543 .BI " NVME_SC_ZNS_ZRWA_RESOURCES_UNAVAILABLE"
544 ,
545 .br
546 .br
547 .BI " NVME_SC_ZNS_BOUNDARY_ERROR"
548 ,
549 .br
550 .br
551 .BI " NVME_SC_ZNS_FULL"
552 ,
553 .br
554 .br
555 .BI " NVME_SC_ZNS_READ_ONLY"
556 ,
557 .br
558 .br
559 .BI " NVME_SC_ZNS_OFFLINE"
560 ,
561 .br
562 .br
563 .BI " NVME_SC_ZNS_INVALID_WRITE"
564 ,
565 .br
566 .br
567 .BI " NVME_SC_ZNS_TOO_MANY_ACTIVE"
568 ,
569 .br
570 .br
571 .BI " NVME_SC_ZNS_TOO_MANY_OPENS"
572 ,
573 .br
574 .br
575 .BI " NVME_SC_ZNS_INVAL_TRANSITION"
576 ,
577 .br
578 .br
579 .BI " NVME_SC_WRITE_FAULT"
580 ,
581 .br
582 .br
583 .BI " NVME_SC_READ_ERROR"
584 ,
585 .br
586 .br
587 .BI " NVME_SC_GUARD_CHECK"
588 ,
589 .br
590 .br
591 .BI " NVME_SC_APPTAG_CHECK"
592 ,
593 .br
594 .br
595 .BI " NVME_SC_REFTAG_CHECK"
596 ,
597 .br
598 .br
599 .BI " NVME_SC_COMPARE_FAILED"
600 ,
601 .br
602 .br
603 .BI " NVME_SC_ACCESS_DENIED"
604 ,
605 .br
606 .br
607 .BI " NVME_SC_UNWRITTEN_BLOCK"
608 ,
609 .br
610 .br
611 .BI " NVME_SC_STORAGE_TAG_CHECK"
612 ,
613 .br
614 .br
615 .BI " NVME_SC_ANA_INTERNAL_PATH_ERROR"
616 ,
617 .br
618 .br
619 .BI " NVME_SC_ANA_PERSISTENT_LOSS"
620 ,
621 .br
622 .br
623 .BI " NVME_SC_ANA_INACCESSIBLE"
624 ,
625 .br
626 .br
627 .BI " NVME_SC_ANA_TRANSITION"
628 ,
629 .br
630 .br
631 .BI " NVME_SC_CTRL_PATH_ERROR"
632 ,
633 .br
634 .br
635 .BI " NVME_SC_HOST_PATH_ERROR"
636 ,
637 .br
638 .br
639 .BI " NVME_SC_CMD_ABORTED_BY_HOST"
640 ,
641 .br
642 .br
643 .BI " NVME_SC_CRD"
644 ,
645 .br
646 .br
647 .BI " NVME_SC_MORE"
648 ,
649 .br
650 .br
651 .BI " NVME_SC_DNR"
652
653 };
654 .SH Constants
655 .IP "NVME_SCT_GENERIC" 12
656 Generic errors applicable to multiple opcodes
657 .IP "NVME_SCT_CMD_SPECIFIC" 12
658 Errors associated to a specific opcode
659 .IP "NVME_SCT_MEDIA" 12
660 Errors associated with media and data integrity
661 .IP "NVME_SCT_PATH" 12
662 Errors associated with the paths connection
663 .IP "NVME_SCT_VS" 12
664 Vendor specific errors
665 .IP "NVME_SCT_MASK" 12
666 Mask to get the value of the Status Code Type
667 .IP "NVME_SCT_SHIFT" 12
668 Shift value to get the value of the Status
669 Code Type
670 .IP "NVME_SC_MASK" 12
671 Mask to get the value of the status code.
672 .IP "NVME_SC_SHIFT" 12
673 Shift value to get the value of the status
674 code.
675 .IP "NVME_SC_SUCCESS" 12
676 Successful Completion: The command
677 completed without error.
678 .IP "NVME_SC_INVALID_OPCODE" 12
679 Invalid Command Opcode: A reserved coded
680 value or an unsupported value in the
681 command opcode field.
682 .IP "NVME_SC_INVALID_FIELD" 12
683 Invalid Field in Command: A reserved
684 coded value or an unsupported value in a
685 defined field.
686 .IP "NVME_SC_CMDID_CONFLICT" 12
687 Command ID Conflict: The command
688 identifier is already in use.
689 .IP "NVME_SC_DATA_XFER_ERROR" 12
690 Data Transfer Error: Transferring the
691 data or metadata associated with a
692 command experienced an error.
693 .IP "NVME_SC_POWER_LOSS" 12
694 Commands Aborted due to Power Loss
695 Notification: Indicates that the command
696 was aborted due to a power loss
697 notification.
698 .IP "NVME_SC_INTERNAL" 12
699 Internal Error: The command was not
700 completed successfully due to an internal error.
701 .IP "NVME_SC_ABORT_REQ" 12
702 Command Abort Requested: The command was
703 aborted due to an Abort command being
704 received that specified the Submission
705 Queue Identifier and Command Identifier
706 of this command.
707 .IP "NVME_SC_ABORT_QUEUE" 12
708 Command Aborted due to SQ Deletion: The
709 command was aborted due to a Delete I/O
710 Submission Queue request received for the
711 Submission Queue to which the command was
712 submitted.
713 .IP "NVME_SC_FUSED_FAIL" 12
714 Command Aborted due to Failed Fused Command:
715 The command was aborted due to the other
716 command in a fused operation failing.
717 .IP "NVME_SC_FUSED_MISSING" 12
718 Aborted due to Missing Fused Command: The
719 fused command was aborted due to the
720 adjacent submission queue entry not
721 containing a fused command that is the
722 other command.
723 .IP "NVME_SC_INVALID_NS" 12
724 Invalid Namespace or Format: The
725 namespace or the format of that namespace
726 is invalid.
727 .IP "NVME_SC_CMD_SEQ_ERROR" 12
728 Command Sequence Error: The command was
729 aborted due to a protocol violation in a
730 multi-command sequence.
731 .IP "NVME_SC_SGL_INVALID_LAST" 12
732 Invalid SGL Segment Descriptor: The
733 command includes an invalid SGL Last
734 Segment or SGL Segment descriptor.
735 .IP "NVME_SC_SGL_INVALID_COUNT" 12
736 Invalid Number of SGL Descriptors: There
737 is an SGL Last Segment descriptor or an
738 SGL Segment descriptor in a location
739 other than the last descriptor of a
740 segment based on the length indicated.
741 .IP "NVME_SC_SGL_INVALID_DATA" 12
742 Data SGL Length Invalid: This may occur
743 if the length of a Data SGL is too short.
744 This may occur if the length of a Data
745 SGL is too long and the controller does
746 not support SGL transfers longer than the
747 amount of data to be transferred as
748 indicated in the SGL Support field of the
749 Identify Controller data structure.
750 .IP "NVME_SC_SGL_INVALID_METADATA" 12
751 Metadata SGL Length Invalid: This may
752 occur if the length of a Metadata SGL is
753 too short. This may occur if the length
754 of a Metadata SGL is too long and the
755 controller does not support SGL transfers
756 longer than the amount of data to be
757 transferred as indicated in the SGL
758 Support field of the Identify Controller
759 data structure.
760 .IP "NVME_SC_SGL_INVALID_TYPE" 12
761 SGL Descriptor Type Invalid: The type of
762 an SGL Descriptor is a type that is not
763 supported by the controller.
764 .IP "NVME_SC_CMB_INVALID_USE" 12
765 Invalid Use of Controller Memory Buffer:
766 The attempted use of the Controller
767 Memory Buffer is not supported by the
768 controller.
769 .IP "NVME_SC_PRP_INVALID_OFFSET" 12
770 PRP Offset Invalid: The Offset field for
771 a PRP entry is invalid.
772 .IP "NVME_SC_AWU_EXCEEDED" 12
773 Atomic Write Unit Exceeded: The length
774 specified exceeds the atomic write unit size.
775 .IP "NVME_SC_OP_DENIED" 12
776 Operation Denied: The command was denied
777 due to lack of access rights. Refer to
778 the appropriate security specification.
779 .IP "NVME_SC_SGL_INVALID_OFFSET" 12
780 SGL Offset Invalid: The offset specified
781 in a descriptor is invalid. This may
782 occur when using capsules for data
783 transfers in NVMe over Fabrics
784 implementations and an invalid offset in
785 the capsule is specified.
786 .IP "NVME_SC_HOSTID_FORMAT" 12
787 Host Identifier Inconsistent Format: The
788 NVM subsystem detected the simultaneous
789 use of 64- bit and 128-bit Host
790 Identifier values on different
791 controllers.
792 .IP "NVME_SC_KAT_EXPIRED" 12
793 Keep Alive Timer Expired: The Keep Alive
794 Timer expired.
795 .IP "NVME_SC_KAT_INVALID" 12
796 Keep Alive Timeout Invalid: The Keep
797 Alive Timeout value specified is invalid.
798 .IP "NVME_SC_CMD_ABORTED_PREMEPT" 12
799 Command Aborted due to Preempt and Abort:
800 The command was aborted due to a
801 Reservation Acquire command.
802 .IP "NVME_SC_SANITIZE_FAILED" 12
803 Sanitize Failed: The most recent sanitize
804 operation failed and no recovery action
805 has been successfully completed.
806 .IP "NVME_SC_SANITIZE_IN_PROGRESS" 12
807 Sanitize In Progress: The requested
808 function (e.g., command) is prohibited
809 while a sanitize operation is in
810 progress.
811 .IP "NVME_SC_SGL_INVALID_GRANULARITY" 12
812 SGL Data Block Granularity Invalid: The
813 Address alignment or Length granularity
814 for an SGL Data Block descriptor is
815 invalid.
816 .IP "NVME_SC_CMD_IN_CMBQ_NOT_SUPP" 12
817 Command Not Supported for Queue in CMB:
818 The implementation does not support
819 submission of the command to a Submission
820 Queue in the Controller Memory Buffer or
821 command completion to a Completion Queue
822 in the Controller Memory Buffer.
823 .IP "NVME_SC_NS_WRITE_PROTECTED" 12
824 Namespace is Write Protected: The command
825 is prohibited while the namespace is
826 write protected as a result of a change
827 in the namespace write protection state
828 as defined by the Namespace Write
829 Protection State Machine.
830 .IP "NVME_SC_CMD_INTERRUPTED" 12
831 Command Interrupted: Command processing
832 was interrupted and the controller is
833 unable to successfully complete the
834 command. The host should retry the
835 command.
836 .IP "NVME_SC_TRAN_TPORT_ERROR" 12
837 Transient Transport Error: A transient
838 transport error was detected. If the
839 command is retried on the same
840 controller, the command is likely to
841 succeed. A command that fails with a
842 transient transport error four or more
843 times should be treated as a persistent
844 transport error that is not likely to
845 succeed if retried on the same
846 controller.
847 .IP "NVME_SC_PROHIBITED_BY_CMD_AND_FEAT" 12
848 Command Prohibited by Command and Feature
849 Lockdown: The command was aborted due to
850 command execution being prohibited by
851 the Command and Feature Lockdown.
852 .IP "NVME_SC_ADMIN_CMD_MEDIA_NOT_READY" 12
853 Admin Command Media Not Ready: The Admin
854 command requires access to media and
855 the media is not ready.
856 .IP "NVME_SC_INVALID_KEY_TAG" 12
857 The command was aborted due to an invalid KEYTAG
858 field value.
859 .IP "NVME_SC_HOST_DISPERSED_NS_NOT_ENABLED" 12
860 The command is prohibited while the
861 Host Disperesed Namespace Support (HDISNS) field is not
862 set to 1h in the Host Behavior Support feature.
863 .IP "NVME_SC_HOST_ID_NOT_INITIALIZED" 12
864 Host Identifier Not Initialized.
865 .IP "NVME_SC_INCORRECT_KEY" 12
866 The command was aborted due to the key associated
867 with the KEYTAG field being incorrect.
868 .IP "NVME_SC_FDP_DISABLED" 12
869 Command is not allowed when
870 Flexible Data Placement is disabled.
871 .IP "NVME_SC_INVALID_PLACEMENT_HANDLE_LIST" 12
872 The Placement Handle List is invalid
873 due to invalid Reclaim Unit Handle Identifier or
874 valid Reclaim Unit Handle Identifier but restricted or
875 the Placement Handle List number of entries exceeded the
876 maximum number allowed.
877 .IP "NVME_SC_LBA_RANGE" 12
878 LBA Out of Range: The command references
879 an LBA that exceeds the size of the namespace.
880 .IP "NVME_SC_CAP_EXCEEDED" 12
881 Capacity Exceeded: Execution of the
882 command has caused the capacity of the
883 namespace to be exceeded.
884 .IP "NVME_SC_NS_NOT_READY" 12
885 Namespace Not Ready: The namespace is not
886 ready to be accessed as a result of a
887 condition other than a condition that is
888 reported as an Asymmetric Namespace
889 Access condition.
890 .IP "NVME_SC_RESERVATION_CONFLICT" 12
891 Reservation Conflict: The command was
892 aborted due to a conflict with a
893 reservation held on the accessed
894 namespace.
895 .IP "NVME_SC_FORMAT_IN_PROGRESS" 12
896 Format In Progress: A Format NVM command
897 is in progress on the namespace.
898 .IP "NVME_SC_INVALID_VALUE_SIZE" 12
899 The value size is not valid.
900 .IP "NVME_SC_INVALID_KEY_SIZE" 12
901 The KV key size is not valid.
902 .IP "NVME_SC_KV_KEY_NOT_EXISTS" 12
903 The Store If Key Exists (SIKE) bit is set to
904 '1' in the Store Option field and the KV key does not
905 exists.
906 .IP "NVME_SC_UNRECOVERED_ERROR" 12
907 There was an unrecovered error when reading
908 from the meidum.
909 .IP "NVME_SC_KEY_EXISTS" 12
910 The Store If No Key Exists (SINKE) bit is set to '1'
911 in the Store Option field and the KV key exists.
912 .IP "NVME_SC_CQ_INVALID" 12
913 Completion Queue Invalid: The Completion
914 Queue identifier specified in the command
915 does not exist.
916 .IP "NVME_SC_QID_INVALID" 12
917 Invalid Queue Identifier: The creation of
918 the I/O Completion Queue failed due to an
919 invalid queue identifier specified as
920 part of the command. An invalid queue
921 identifier is one that is currently in
922 use or one that is outside the range
923 supported by the controller.
924 .IP "NVME_SC_QUEUE_SIZE" 12
925 Invalid Queue Size: The host attempted to
926 create an I/O Completion Queue with an
927 invalid number of entries.
928 .IP "NVME_SC_ABORT_LIMIT" 12
929 Abort Command Limit Exceeded: The number
930 of concurrently outstanding Abort commands
931 has exceeded the limit indicated in the
932 Identify Controller data structure.
933 .IP "NVME_SC_ABORT_MISSING" 12
934 Abort Command is missing: The abort
935 command is missing.
936 .IP "NVME_SC_ASYNC_LIMIT" 12
937 Asynchronous Event Request Limit
938 Exceeded: The number of concurrently
939 outstanding Asynchronous Event Request
940 commands has been exceeded.
941 .IP "NVME_SC_FIRMWARE_SLOT" 12
942 Invalid Firmware Slot: The firmware slot
943 indicated is invalid or read only. This
944 error is indicated if the firmware slot
945 exceeds the number supported.
946 .IP "NVME_SC_FIRMWARE_IMAGE" 12
947 Invalid Firmware Image: The firmware
948 image specified for activation is invalid
949 and not loaded by the controller.
950 .IP "NVME_SC_INVALID_VECTOR" 12
951 Invalid Interrupt Vector: The creation of
952 the I/O Completion Queue failed due to an
953 invalid interrupt vector specified as
954 part of the command.
955 .IP "NVME_SC_INVALID_LOG_PAGE" 12
956 Invalid Log Page: The log page indicated
957 is invalid. This error condition is also
958 returned if a reserved log page is
959 requested.
960 .IP "NVME_SC_INVALID_FORMAT" 12
961 Invalid Format: The LBA Format specified
962 is not supported.
963 .IP "NVME_SC_FW_NEEDS_CONV_RESET" 12
964 Firmware Activation Requires Conventional Reset:
965 The firmware commit was successful,
966 however, activation of the firmware image
967 requires a conventional reset.
968 .IP "NVME_SC_INVALID_QUEUE" 12
969 Invalid Queue Deletion: Invalid I/O
970 Completion Queue specified to delete.
971 .IP "NVME_SC_FEATURE_NOT_SAVEABLE" 12
972 Feature Identifier Not Saveable: The
973 Feature Identifier specified does not
974 support a saveable value.
975 .IP "NVME_SC_FEATURE_NOT_CHANGEABLE" 12
976 Feature Not Changeable: The Feature
977 Identifier is not able to be changed.
978 .IP "NVME_SC_FEATURE_NOT_PER_NS" 12
979 Feature Not Namespace Specific: The
980 Feature Identifier specified is not
981 namespace specific. The Feature
982 Identifier settings apply across all
983 namespaces.
984 .IP "NVME_SC_FW_NEEDS_SUBSYS_RESET" 12
985 Firmware Activation Requires NVM
986 Subsystem Reset: The firmware commit was
987 successful, however, activation of the
988 firmware image requires an NVM Subsystem.
989 .IP "NVME_SC_FW_NEEDS_RESET" 12
990 Firmware Activation Requires Controller
991 Level Reset: The firmware commit was
992 successful; however, the image specified
993 does not support being activated without
994 a reset.
995 .IP "NVME_SC_FW_NEEDS_MAX_TIME" 12
996 Firmware Activation Requires Maximum Time
997 Violation: The image specified if
998 activated immediately would exceed the
999 Maximum Time for Firmware Activation
1000 (MTFA) value reported in Identify
1001 Controller.
1002 .IP "NVME_SC_FW_ACTIVATE_PROHIBITED" 12
1003 Firmware Activation Prohibited: The image
1004 specified is being prohibited from
1005 activation by the controller for vendor
1006 specific reasons.
1007 .IP "NVME_SC_OVERLAPPING_RANGE" 12
1008 Overlapping Range: The downloaded
1009 firmware image has overlapping ranges.
1010 .IP "NVME_SC_NS_INSUFFICIENT_CAP" 12
1011 Namespace Insufficient Capacity: Creating
1012 the namespace requires more free space
1013 than is currently available.
1014 .IP "NVME_SC_NS_ID_UNAVAILABLE" 12
1015 Namespace Identifier Unavailable: The
1016 number of namespaces supported has been
1017 exceeded.
1018 .IP "NVME_SC_NS_ALREADY_ATTACHED" 12
1019 Namespace Already Attached: The
1020 controller is already attached to the
1021 namespace specified.
1022 .IP "NVME_SC_NS_IS_PRIVATE" 12
1023 Namespace Is Private: The namespace is
1024 private and is already attached to one
1025 controller.
1026 .IP "NVME_SC_NS_NOT_ATTACHED" 12
1027 Namespace Not Attached: The request to
1028 detach the controller could not be
1029 completed because the controller is not
1030 attached to the namespace.
1031 .IP "NVME_SC_THIN_PROV_NOT_SUPP" 12
1032 Thin Provisioning Not Supported: Thin
1033 provisioning is not supported by the
1034 controller.
1035 .IP "NVME_SC_CTRL_LIST_INVALID" 12
1036 Controller List Invalid: The controller
1037 list provided contains invalid controller
1038 ids.
1039 .IP "NVME_SC_SELF_TEST_IN_PROGRESS" 12
1040 Device Self-test In Progress: The controller
1041 or NVM subsystem already has a device
1042 self-test operation in process.
1043 .IP "NVME_SC_BP_WRITE_PROHIBITED" 12
1044 Boot Partition Write Prohibited: The
1045 command is trying to modify a locked Boot
1046 Partition.
1047 .IP "NVME_SC_INVALID_CTRL_ID" 12
1048 Invalid Controller Identifier:
1049 .IP "NVME_SC_INVALID_SEC_CTRL_STATE" 12
1050 Invalid Secondary Controller State
1051 .IP "NVME_SC_INVALID_CTRL_RESOURCES" 12
1052 Invalid Number of Controller Resources
1053 .IP "NVME_SC_INVALID_RESOURCE_ID" 12
1054 Invalid Resource Identifier
1055 .IP "NVME_SC_PMR_SAN_PROHIBITED" 12
1056 Sanitize Prohibited While Persistent
1057 Memory Region is Enabled
1058 .IP "NVME_SC_ANA_GROUP_ID_INVALID" 12
1059 ANA Group Identifier Invalid: The specified
1060 ANA Group Identifier (ANAGRPID) is not
1061 supported in the submitted command.
1062 .IP "NVME_SC_ANA_ATTACH_FAILED" 12
1063 ANA Attach Failed: The controller is not
1064 attached to the namespace as a result
1065 of an ANA condition.
1066 .IP "NVME_SC_INSUFFICIENT_CAP" 12
1067 Insufficient Capacity: Requested operation
1068 requires more free space than is currently
1069 available.
1070 .IP "NVME_SC_NS_ATTACHMENT_LIMIT_EXCEEDED" 12
1071 Namespace Attachment Limit Exceeded:
1072 Attaching the ns to a controller causes
1073 max number of ns attachments allowed
1074 to be exceeded.
1075 .IP "NVME_SC_PROHIBIT_CMD_EXEC_NOT_SUPPORTED" 12
1076 Prohibition of Command Execution
1077 Not Supported
1078 .IP "NVME_SC_IOCS_NOT_SUPPORTED" 12
1079 I/O Command Set Not Supported
1080 .IP "NVME_SC_IOCS_NOT_ENABLED" 12
1081 I/O Command Set Not Enabled
1082 .IP "NVME_SC_IOCS_COMBINATION_REJECTED" 12
1083 I/O Command Set Combination Rejected
1084 .IP "NVME_SC_INVALID_IOCS" 12
1085 Invalid I/O Command Set
1086 .IP "NVME_SC_ID_UNAVAILABLE" 12
1087 Identifier Unavailable
1088 .IP "NVME_SC_INVALID_DISCOVERY_INFO" 12
1089 The discovery information provided in
1090 one or more extended discovery
1091 information entries is not applicable
1092 for the type of entity selected in
1093 the Entity Type (ETYPE) field of the
1094 Discovery Information Management
1095 command data portion’s header.
1096 .IP "NVME_SC_ZONING_DATA_STRUCT_LOCKED" 12
1097 The requested Zoning data structure
1098 is locked on the CDC.
1099 .IP "NVME_SC_ZONING_DATA_STRUCT_NOTFND" 12
1100 The requested Zoning data structure
1101 does not exist on the CDC.
1102 .IP "NVME_SC_INSUFFICIENT_DISC_RES" 12
1103 The number of discover information
1104 entries provided in the data portion
1105 of the Discovery Information
1106 Management command for a registration
1107 task (i.e., TAS field cleared to 0h)
1108 exceeds the available capacity for
1109 new discovery information entries on
1110 the CDC or DDC. This may be a
1111 transient condition.
1112 .IP "NVME_SC_REQSTD_FUNCTION_DISABLED" 12
1113 Fabric Zoning is not enabled on the
1114 CDC
1115 .IP "NVME_SC_ZONEGRP_ORIGINATOR_INVLD" 12
1116 The NQN contained in the ZoneGroup
1117 Originator field does not match the
1118 Host NQN used by the DDC to connect
1119 to the CDC.
1120 .IP "NVME_SC_INVALID_CONTROLER_DATA_QUEUE" 12
1121 This error indicates that the
1122 specified Controller Data Queue
1123 Identifier is invalid for the controller
1124 processing the command.
1125 .IP "NVME_SC_NOT_ENOUGH_RESOURCES" 12
1126 This error indicates that there is not
1127 enough resources in the controller to
1128 process the command.
1129 .IP "NVME_SC_CONTROLLER_SUSPENDED" 12
1130 The operation requested is not allowed if
1131 the specified controller is suspended.
1132 .IP "NVME_SC_CONTROLLER_NOT_SUSPENDED" 12
1133 The operation requested is not allowed if
1134 the specified controller is not
1135 suspended.
1136 .IP "NVME_SC_CONTROLLER_DATA_QUEUE_FULL" 12
1137 The controller detected that a
1138 Controller Data Queue became full.
1139 .IP "NVME_SC_BAD_ATTRIBUTES" 12
1140 Conflicting Dataset Management Attributes
1141 .IP "NVME_SC_INVALID_PI" 12
1142 Invalid Protection Information
1143 .IP "NVME_SC_READ_ONLY" 12
1144 Attempted Write to Read Only Range
1145 .IP "NVME_SC_CMD_SIZE_LIMIT_EXCEEDED" 12
1146 Command Size Limit Exceeded
1147 .IP "NVME_SC_INCOMPATIBLE_NS" 12
1148 Incompatible Namespace or Format: At
1149 least one source namespace and the
1150 destination namespace have incompatible
1151 formats.
1152 .IP "NVME_SC_FAST_COPY_NOT_POSSIBLE" 12
1153 Fast Copy Not Possible: The Fast Copy
1154 Only (FCO) bit was set to ‘1’ in a Source
1155 Range entry and the controller was not
1156 able to use fast copy operations to copy
1157 the specified data.
1158 .IP "NVME_SC_OVERLAPPING_IO_RANGE" 12
1159 Overlapping I/O Range: A source logical
1160 block range overlaps the destination
1161 logical block range.
1162 .IP "NVME_SC_INSUFFICIENT_RESOURCES" 12
1163 Insufficient Resources: A resource
1164 shortage prevented the controller from
1165 performing the requested copy.
1166 .IP "NVME_SC_CONNECT_FORMAT" 12
1167 Incompatible Format: The NVM subsystem
1168 does not support the record format
1169 specified by the host.
1170 .IP "NVME_SC_CONNECT_CTRL_BUSY" 12
1171 Controller Busy: The controller is
1172 already associated with a host.
1173 .IP "NVME_SC_CONNECT_INVALID_PARAM" 12
1174 Connect Invalid Parameters: One or more
1175 of the command parameters.
1176 .IP "NVME_SC_CONNECT_RESTART_DISC" 12
1177 Connect Restart Discovery: The NVM
1178 subsystem requested is not available.
1179 .IP "NVME_SC_CONNECT_INVALID_HOST" 12
1180 Connect Invalid Host: The host is either
1181 not allowed to establish an association
1182 to any controller in the NVM subsystem or
1183 the host is not allowed to establish an
1184 association to the specified controller
1185 .IP "NVME_SC_DISCONNECT_INVALID_QTYPE" 12
1186 Invalid Queue Type: The command was sent
1187 on the wrong queue type.
1188 .IP "NVME_SC_DISCOVERY_RESTART" 12
1189 Discover Restart: The snapshot of the
1190 records is now invalid or out of date.
1191 .IP "NVME_SC_AUTH_REQUIRED" 12
1192 Authentication Required: NVMe in-band
1193 authentication is required and the queue
1194 has not yet been authenticated.
1195 .IP "NVME_SC_ZNS_INVALID_OP_REQUEST" 12
1196 Invalid Zone Operation Request:
1197 The operation requested is invalid. This may be due to
1198 various conditions, including: attempting to allocate a
1199 ZRWA when a zone is not in the ZSE:Empty state; or
1200 invalid Flush Explicit ZRWA Range Send Zone Action
1201 operation.
1202 .IP "NVME_SC_ZNS_ZRWA_RESOURCES_UNAVAILABLE" 12
1203 ZRWA Resources Unavailable:
1204 No ZRWAs are available.
1205 .IP "NVME_SC_ZNS_BOUNDARY_ERROR" 12
1206 Zone Boundary Error: The command specifies
1207 logical blocks in more than one zone.
1208 .IP "NVME_SC_ZNS_FULL" 12
1209 Zone Is Full: The accessed zone is in the
1210 ZSF:Full state.
1211 .IP "NVME_SC_ZNS_READ_ONLY" 12
1212 Zone Is Read Only: The accessed zone is
1213 in the ZSRO:Read Only state.
1214 .IP "NVME_SC_ZNS_OFFLINE" 12
1215 Zone Is Offline: The accessed zone is
1216 in the ZSO:Offline state.
1217 .IP "NVME_SC_ZNS_INVALID_WRITE" 12
1218 Zone Invalid Write: The write to a zone
1219 was not at the write pointer.
1220 .IP "NVME_SC_ZNS_TOO_MANY_ACTIVE" 12
1221 Too Many Active Zones: The controller
1222 does not allow additional active zones.
1223 .IP "NVME_SC_ZNS_TOO_MANY_OPENS" 12
1224 Too Many Open Zones: The controller does
1225 not allow additional open zones.
1226 .IP "NVME_SC_ZNS_INVAL_TRANSITION" 12
1227 Invalid Zone State Transition: The request
1228 is not a valid zone state transition.
1229 .IP "NVME_SC_WRITE_FAULT" 12
1230 Write Fault: The write data could not be
1231 committed to the media.
1232 .IP "NVME_SC_READ_ERROR" 12
1233 Unrecovered Read Error: The read data
1234 could not be recovered from the media.
1235 .IP "NVME_SC_GUARD_CHECK" 12
1236 End-to-end Guard Check Error: The command
1237 was aborted due to an end-to-end guard
1238 check failure.
1239 .IP "NVME_SC_APPTAG_CHECK" 12
1240 End-to-end Application Tag Check Error:
1241 The command was aborted due to an
1242 end-to-end application tag check failure.
1243 .IP "NVME_SC_REFTAG_CHECK" 12
1244 End-to-end Reference Tag Check Error: The
1245 command was aborted due to an end-to-end
1246 reference tag check failure.
1247 .IP "NVME_SC_COMPARE_FAILED" 12
1248 Compare Failure: The command failed due
1249 to a miscompare during a Compare command.
1250 .IP "NVME_SC_ACCESS_DENIED" 12
1251 Access Denied: Access to the namespace
1252 and/or LBA range is denied due to lack of
1253 access rights.
1254 .IP "NVME_SC_UNWRITTEN_BLOCK" 12
1255 Deallocated or Unwritten Logical Block:
1256 The command failed due to an attempt to
1257 read from or verify an LBA range
1258 containing a deallocated or unwritten
1259 logical block.
1260 .IP "NVME_SC_STORAGE_TAG_CHECK" 12
1261 End-to-End Storage Tag Check Error: The
1262 command was aborted due to an end-to-end
1263 storage tag check failure.
1264 .IP "NVME_SC_ANA_INTERNAL_PATH_ERROR" 12
1265 Internal Path Error: The command was not
1266 completed as the result of a controller
1267 internal error that is specific to the
1268 controller processing the command.
1269 .IP "NVME_SC_ANA_PERSISTENT_LOSS" 12
1270 Asymmetric Access Persistent Loss: The
1271 requested function (e.g., command) is not
1272 able to be performed as a result of the
1273 relationship between the controller and
1274 the namespace being in the ANA Persistent
1275 Loss state.
1276 .IP "NVME_SC_ANA_INACCESSIBLE" 12
1277 Asymmetric Access Inaccessible: The
1278 requested function (e.g., command) is not
1279 able to be performed as a result of the
1280 relationship between the controller and
1281 the namespace being in the ANA
1282 Inaccessible state.
1283 .IP "NVME_SC_ANA_TRANSITION" 12
1284 Asymmetric Access Transition: The
1285 requested function (e.g., command) is not
1286 able to be performed as a result of the
1287 relationship between the controller and
1288 the namespace transitioning between
1289 Asymmetric Namespace Access states.
1290 .IP "NVME_SC_CTRL_PATH_ERROR" 12
1291 Controller Pathing Error: A pathing error
1292 was detected by the controller.
1293 .IP "NVME_SC_HOST_PATH_ERROR" 12
1294 Host Pathing Error: A pathing error was
1295 detected by the host.
1296 .IP "NVME_SC_CMD_ABORTED_BY_HOST" 12
1297 Command Aborted By Host: The command was
1298 aborted as a result of host action.
1299 .IP "NVME_SC_CRD" 12
1300 Mask to get value of Command Retry Delay
1301 index
1302 .IP "NVME_SC_MORE" 12
1303 More bit. If set, more status information
1304 for this command as part of the Error
1305 Information log that may be retrieved with
1306 the Get Log Page command.
1307 .IP "NVME_SC_DNR" 12
1308 Do Not Retry bit. If set, if the same
1309 command is re-submitted to any controller
1310 in the NVM subsystem, then that
1311 re-submitted command is expected to fail.