Debian Codegraph @

doc/locale/ja/LC_MESSAGES/install/others.po

raw
1 # -*- po -*-
2 # Japanese translations for 1.2.1 package.
3 # Copyright (C) 2009-2011, Brazil, Inc
4 # This file is distributed under the same license as the groonga package.
5 # Kouhei Sutou <[email protected]>, 2011.
6 #
7 msgid ""
8 msgstr ""
9 "Project-Id-Version: 1.2.1\n"
10 "Report-Msgid-Bugs-To: \n"
11 "PO-Revision-Date: 2022-08-31 17:44+0900\n"
12 "Language-Team: Japanese\n"
13 "Language: ja\n"
14 "MIME-Version: 1.0\n"
15 "Content-Type: text/plain; charset=UTF-8\n"
16 "Content-Transfer-Encoding: 8bit\n"
17 "Plural-Forms: nplurals=1; plural=0;\n"
18
19 msgid "Building with GNU Autotools is deprecated, you should build with CMake: :doc:`/install/cmake`"
20 msgstr "GNU Autotoolsを使ったビルドは廃止予定のため、CMakeを使ってビルドをしてください: :doc:`/install/cmake`"
21
22 msgid "Others"
23 msgstr "その他"
24
25 msgid "This section describes how to install Groonga from source on UNIX like environment."
26 msgstr "このセクションではUNIX系の環境でGroongaをソースコードからインストールする方法を説明します。"
27
28 msgid "To get more detail about installing Groonga from source on the specific environment, find the document for the specific environment from :doc:`/install`."
29 msgstr ":doc:`/install` にある特定環境用のドキュメントに、その環境向けのより詳細な情報があります。特定環境用のドキュメントがある場合は、まずそちらを参照してください。"
30
31 msgid "Dependencies"
32 msgstr "依存関係"
33
34 msgid "Groonga doesn't require any special libraries but requires some tools for build."
35 msgstr "Groongaは特別なライブラリを必要としませんが、いくつかビルドに必要なツールがあります。"
36
37 msgid "Tools"
38 msgstr "ツール"
39
40 msgid "Here are required tools:"
41 msgstr "以下が必要なツールです:"
42
43 msgid "``wget``, ``curl`` or Web browser for downloading source archive"
44 msgstr "``wget`` 、 ``curl`` または Web ブラウザ(ソースアーカイブをダウンロードするため)"
45
46 msgid "``tar`` and ``gzip`` for extracting source archive"
47 msgstr "``tar`` と ``gzip`` (ソースアーカイブを展開するため)"
48
49 msgid "shell (many shells such as ``dash``, ``bash`` and ``zsh`` will work)"
50 msgstr "シェル( ``dash`` 、 ``bash`` 、 ``zsh`` など、どのようなシェルでもたぶん大丈夫)"
51
52 msgid "C compiler and C++ compiler (``gcc`` and ``g++`` are supported but other compilers may work)"
53 msgstr "CコンパイラーとC++コンパイラー ( ``gcc`` と ``g++`` がサポート対象だが、他のコンパイラーでもたぶん大丈夫)"
54
55 msgid "``make`` (GNU make is supported but other make like BSD make will work)"
56 msgstr "``make`` (GNU makeがサポート対象だが、BSD makeなど他のmakeでもたぶん大丈夫)"
57
58 msgid "You must get them ready."
59 msgstr "これらを用意してください。"
60
61 msgid "You can use `CMake <http://www.cmake.org/>`_ instead of shell but this document doesn't describe about building with CMake."
62 msgstr "シェルの代わりに `CMake <http://www.cmake.org/>`_ を使うこともできますが、このドキュメントではCMakeを使ってビルドする方法については説明しません。"
63
64 msgid "Here are optional tools:"
65 msgstr "以下はあるとよいツールです:"
66
67 msgid "`pkg-config <http://www.freedesktop.org/wiki/Software/pkg-config>`_ for detecting libraries"
68 msgstr "`pkg-config <http://www.freedesktop.org/wiki/Software/pkg-config>`_ (ライブラリを検出するため)"
69
70 msgid "`sudo <http://www.gratisoft.us/sudo/>`_ for installing built Groonga"
71 msgstr "`sudo <http://www.gratisoft.us/sudo/>`_ (ビルドしたGroongaをインストールするため)"
72
73 msgid "You must get them ready if you want to use optional libraries."
74 msgstr "追加のライブラリを使いたい場合はこれらのツールを用意しておかなければいけません。"
75
76 msgid "Libraries"
77 msgstr "ライブラリ"
78
79 msgid "All libraries are optional. Here are optional libraries:"
80 msgstr "どのライブラリも必須ではありません。以下はオプションとして使えるライブラリです:"
81
82 msgid "`MeCab <https://taku910.github.io/mecab/>`_ for tokenizing full-text search target document by morphological analysis"
83 msgstr "`MeCab <https://taku910.github.io/mecab/>`_ (全文検索対象のドキュメントを形態素解析でトークナイズするため)"
84
85 msgid "`KyTea <http://www.phontron.com/kytea/>`_ for tokenizing full-text search target document by morphological analysis"
86 msgstr "`KyTea <http://www.phontron.com/kytea/>`_ (全文検索対象のドキュメントを形態素解析でトークナイズするため)"
87
88 msgid "`ZeroMQ <http://www.zeromq.org/>`_ for :doc:`/reference/suggest`"
89 msgstr "`ZeroMQ <http://www.zeromq.org/>`_ ( :doc:`/reference/suggest` 用)"
90
91 msgid "`libevent <http://libevent.org/>`_ for :doc:`/reference/suggest`"
92 msgstr "`libevent <http://libevent.org/>`_ ( :doc:`/reference/suggest` 用)"
93
94 msgid "`MessagePack <http://msgpack.org/>`_ for supporting MessagePack output and :doc:`/reference/suggest`"
95 msgstr "`MessagePack <http://msgpack.org/>`_ (MessagePack出力サポート用および :doc:`/reference/suggest` 用)"
96
97 msgid "`libedit <http://www.thrysoee.dk/editline/>`_ for command line editing in :doc:`/reference/executables/groonga`"
98 msgstr "`libedit <http://www.thrysoee.dk/editline/>`_ ( :doc:`/reference/executables/groonga` のコマンドライン編集用)"
99
100 msgid "`zlib <http://zlib.net/>`_ for compressing column value"
101 msgstr "`zlib <http://zlib.net/>`_ (カラム値の圧縮用)"
102
103 msgid "`LZ4 <https://lz4.github.io/lz4/>`_ for compressing column value"
104 msgstr "`LZ4 <https://lz4.github.io/lz4/>`_ (カラム値の圧縮用)"
105
106 msgid "`Zstandard <https://facebook.github.io/zstd/>`_ for compressing column value"
107 msgstr "`Zstandard <https://facebook.github.io/zstd/>`_ (カラム値の圧縮用)"
108
109 msgid "If you want to use those all or some libraries, you need to install them before installing Groonga."
110 msgstr "これらのライブラリを使いたい場合は、Groongaをインストールする前にライブラリをインストールしてください。"
111
112 msgid "Build from source"
113 msgstr "ソースからビルド"
114
115 msgid "Groonga uses GNU build system. So the following is the simplest build steps::"
116 msgstr "GroongaはGNUビルドシステムを使っています。以下は一番簡単なビルド手順です::"
117
118 msgid "After the above steps, :doc:`/reference/executables/groonga` is found in ``/usr/local/bin/groonga``."
119 msgstr "上記の手順を実行すると ``/usr/local/bin/groonga`` に :doc:`/reference/executables/groonga` がインストールされます。"
120
121 msgid "The default build will work well but you can customize Groonga at ``configure`` step."
122 msgstr "デフォルトのビルドでもうまく動くでしょうが、 ``configure`` のときにGroongaをカスタマイズすることができます。"
123
124 msgid "The following describes details about each step."
125 msgstr "以下、それぞれの手順の詳細を説明します。"
126
127 msgid "``configure``"
128 msgstr ""
129
130 msgid "First, you need to run ``configure``. Here are important ``configure`` options:"
131 msgstr "まず ``configure`` を実行します。重要な ``configure`` のオプションは以下の通りです:"
132
133 msgid "``--prefix=PATH``"
134 msgstr ""
135
136 msgid "Specifies the install base directory. Groonga related files are installed under ``${PATH}/`` directory."
137 msgstr "インストール先となるディレクトリを指定します。Groonga関連のファイルは ``${PATH}/`` ディレクトリ以下にインストールされます。"
138
139 msgid "The default is ``/usr/local``. In this case, :doc:`/reference/executables/groonga` is installed into ``/usr/local/bin/groonga``."
140 msgstr "デフォルトは ``/usr/local`` 。デフォルトの場合は :doc:`/reference/executables/groonga` は ``/usr/local/bin/groonga`` にインストールされます。"
141
142 msgid "Here is an example that installs Groonga into ``~/local`` for an user use instead of system wide use::"
143 msgstr "以下はシステム全体にGroongaをインストールするのではなく、ユーザーが個人で使う目的で ``~/local`` にインストールする例です::"
144
145 msgid "``--localstatedir=PATH``"
146 msgstr ""
147
148 msgid "Specifies the base directory to place modifiable file such as log file, PID file and database files. For example, log file is placed at ``${PATH}/log/groonga.log``."
149 msgstr "ログファイル、PIDファイル、データベースなど頻繁に変更されるファイルを置くディレクトリを指定します。たとえば、ログファイルは ``${PATH}/log/groonga.log`` に置かれます。"
150
151 msgid "The default is ``/usr/local/var``."
152 msgstr "デフォルトは ``/usr/local/var`` です。"
153
154 msgid "Here is an example that system wide ``/var`` is used for modifiable files::"
155 msgstr "以下は頻繁に変更されるファイルをシステム全体で使う領域である ``/var`` に置く例です::"
156
157 msgid "``--with-log-path=PATH``"
158 msgstr ""
159
160 msgid "Specifies the default log file path. You can override the default log path is :doc:`/reference/executables/groonga` command's ``--log-path`` command line option. So this option is not critical build option. It's just for convenient."
161 msgstr "ログファイルのデフォルトのパスを指定します。ログファイルのデフォルトのパスは :doc:`/reference/executables/groonga` の ``--log-path`` コマンドラインオプションで変更できます。そのため、このオプションはそんなに重要なビルドオプションではありません。少し便利にするためのオプションです。"
162
163 msgid "The default is ``/usr/local/var/log/groonga.log``. The ``/usr/local/var`` part is changed by ``--localstatedir`` option."
164 msgstr "デフォルトは ``/usr/local/var/log/groonga.log`` です。 ``/usr/local/var`` の部分は ``--localstatedir`` オプションで変更できます。"
165
166 msgid "Here is an example that log file is placed into shared NFS directory ``/nfs/log/groonga.log``::"
167 msgstr "以下はログファイルを共有しているNFSディレクトリ ``/nfs/log/groonga.log`` に置く例です::"
168
169 msgid "``--with-default-encoding=ENCODING``"
170 msgstr ""
171
172 msgid "Specifies the default encoding. Available encodings are ``euc_jp``, ``sjis``, ``utf8``, ``latin1``, ``koi8r`` and ``none``."
173 msgstr "デフォルトのエンコーディングを指定します。有効なエンコーディングは ``euc_jp`` 、 ``sjis`` 、 ``utf8`` 、 ``latin1`` 、 ``koi8r`` 、 ``none`` です。"
174
175 msgid "The default is ``utf8``."
176 msgstr "デフォルトは ``utf8`` です。"
177
178 msgid "Here is an example that Shift_JIS is used as the default encoding::"
179 msgstr "以下はデフォルトのエンコーディングとしてShift_JISを使う例です::"
180
181 msgid "``--with-match-escalation-threshold=NUMBER``"
182 msgstr ""
183
184 msgid "Specifies the default match escalation threshold. See :ref:`select-match-escalation-threshold` about match escalation threshold. -1 means that match operation never escalate."
185 msgstr "マッチ演算でエスカレーションをするかどうかのデフォルトの閾値を指定します。この閾値については :ref:`select-match-escalation-threshold` を参照してください。-1はマッチ演算でエスカレーションしないという意味です。"
186
187 msgid "The default is 0."
188 msgstr "デフォルトは0です。"
189
190 msgid "Here is an example that match escalation isn't used by default::"
191 msgstr "以下はデフォルトではマッチエスカレーションをしないという例です::"
192
193 msgid "``--with-zlib``"
194 msgstr ""
195
196 msgid "Enables column value compression by zlib."
197 msgstr "zlibを使ってカラム値を圧縮する機能を有効にします。"
198
199 msgid "The default is disabled."
200 msgstr "デフォルトでは無効です。"
201
202 msgid "Here is an example that enables column value compression by zlib::"
203 msgstr "以下はzlibを使ってカラム値を圧縮する機能を有効にする例です::"
204
205 msgid "``--with-lz4``"
206 msgstr ""
207
208 msgid "Enables column value compression by LZ4."
209 msgstr "LZ4を使ってカラム値を圧縮する機能を有効にします。"
210
211 msgid "Here is an example that enables column value compression by LZ4::"
212 msgstr "以下はLZ4を使ってカラム値を圧縮する機能を有効にする例です::"
213
214 msgid "``--with-message-pack=MESSAGE_PACK_INSTALL_PREFIX``"
215 msgstr ""
216
217 msgid "Specifies where MessagePack is installed. If MessagePack isn't installed with ``--prefix=/usr``, you need to specify this option with path that you use for building MessagePack."
218 msgstr "MessagePackがどこにインストールされているかを指定します。MessagePackを ``--prefix=/usr`` という ``configure`` オプションでインストールしていない場合は、MessagePackをビルドするときに指定したパスをこのオプションで指定してください。"
219
220 msgid "If you installed MessagePack with ``--prefix=$HOME/local`` option, you should specify ``--with-message-pack=$HOME/local`` to Groonga's ``configure``."
221 msgstr "もし、MessagePackを ``--prefix=$HOME/local`` という ``configure`` オプションでインストールした場合は、Groongaの ``configure`` では ``--with-message-pack=$HOME/local`` と指定してください。"
222
223 msgid "The default is ``/usr``."
224 msgstr "デフォルトは ``/usr`` です。"
225
226 msgid "Here is an example that uses MessagePack built with ``--prefix=$HOME/local`` option::"
227 msgstr "以下はMessagePackが ``--prefix=$HOME/local`` という ``configure`` オプションでインストールされている場合の例です::"
228
229 msgid "``--with-munin-plugins``"
230 msgstr ""
231
232 msgid "Installs Munin plugins for Groonga. They are installed into ``${PREFIX}/share/groonga/munin/plugins/``."
233 msgstr "Groonga用のMuninプラグインをインストールします。プラグインは ``${PREFIX}/share/groonga/munin/plugins/`` 以下にインストールされます。"
234
235 msgid "Those plugins are not installed by default."
236 msgstr "デフォルトではプラグインはインストールされません。"
237
238 msgid "Here is an example that installs Munin plugins for Groonga::"
239 msgstr "以下はGroonga用のMuninプラグインをインストールする例です::"
240
241 msgid "``--with-package-platform=PLATFORM``"
242 msgstr ""
243
244 msgid "Installs platform specific system management files such as init script. Only Red Hat and Red Hat clone distributions such as AlmaLinux are supported."
245 msgstr "initスクリプトなどプラットフォーム依存のシステム管理ファイルをインストールします。Red HatおよびAlmaLinuxなどのRed Hatクローンのディストリビューションのみサポートしています。"
246
247 msgid "Those system management files are not installed by default."
248 msgstr "デフォルトではシステム管理ファイルはインストールされません。"
249
250 msgid "Here is an example that installs Red Hat or Red Hat clone distributions specific system management files::"
251 msgstr "以下はRed Hat系のOS用のシステム管理ファイルをインストールする例です::"
252
253 msgid "``--help``"
254 msgstr ""
255
256 msgid "Shows all ``configure`` options."
257 msgstr "すべての ``configure`` オプションを表示します。"
258
259 msgid "``--enable-apache-arrow`` and ``--disable-apache-arrow``"
260 msgstr "``--enable-apache-arrow`` および ``--disable-apache-arrow``"
261
262 msgid "Enables or disables Apache Arrow support."
263 msgstr "Apache Arrowのサポートを有効化または無効化します。"
264
265 msgid "In addition to using Apache Arrow IPC streaming format output, you can also use multithreading processing that is used in :ref:`select-n-workers` and :doc:`/reference/functions/query_parallel_or` with the Apache Arrow support."
266 msgstr "Apache Arrowサポートを有効化すると、Apache ArrowのIPC streaming formatが使えるだけでなく、 :ref:`select-n-workers` や :doc:`/reference/functions/query_parallel_or` でマルチスレッドで処理できるようになります。"
267
268 msgid "In case of not specifing ``--enable-apache-arrow`` nor ``--disable-apache-arrow``, the Apache Arrow support is enabled if Apache Arrow is installed on the system, otherwise disabled. This default behaviour is same as to specify ``--enable-apache-arrow=auto``."
269 msgstr "``--enable-apache-arrow`` と ``--disable-apache-arrow`` のどちらも指定しない場合、Apache Arrowがシステムにインストールされていれば有効化し、そうでなければ無効化します。このデフォルト動作は ``--enable-apache-arrow=auto`` を指定した場合と同じです。"
270
271 msgid "When you specify ``--enable-apache-arrow`` explicitly, you must install Apache Arrow on the system beforehand."
272 msgstr "``--enable-apache-arrow`` を明示的に指定する場合, 事前にシステムにApache Arrowをインストールする必要があります。"
273
274 msgid "You can install Apache Arrow following to `the official installation procedure <https://arrow.apache.org/install/>`_. Groonga requires ``libarrow-dev`` on a Debian based system or ``arrow-devel`` on a Red Hat Enterprise Linux based system."
275 msgstr "Apache Arrowは `公式のドキュメントの手順 <https://arrow.apache.org/install/>`_ にしたがってインストールしてください。Debian系のシステムでは ``libarrow-dev`` が、Red Hat Enterprise Linux系のシステムでは ``arrow-devel`` が必要です。"
276
277 msgid "When you specify ``--disable-apache-arrow`` explicitly, Groonga disables the Apache Arrow support even if Apache Arrow is installed on the system."
278 msgstr "``--disable-apache-arrow`` を明示的に指定すると、システムにApache Arrowがインストールされていても、Apache Arrowサポートを無効化します。"
279
280 msgid "Here is an example how to enable the Apache Arrow support explicitly."
281 msgstr "以下は明示的にApache Arrowサポートを有効にする例です。"
282
283 msgid "If you install Apache Arrow into a non-standard directory, you need to specify the :ref:`install-others-configure-pkg-config-path` option."
284 msgstr "Apache Arrowを標準でないディレクトリにインストールしている場合、 :ref:`install-others-configure-pkg-config-path` オプションを指定してください。"
285
286 msgid "``PKG_CONFIG_PATH=PATHS``"
287 msgstr ""
288
289 msgid "Adds search paths of ``.pc`` files for ``pkg-config``."
290 msgstr "pkg-configの.pcファイルの検索パスを追加します。"
291
292 msgid "You can specify multiple paths using ``:`` to separating."
293 msgstr "``:`` で区切ることで複数のパスを指定することができます。"
294
295 msgid "Groonga uses ``pkg-config`` to find external libraries."
296 msgstr "Groongaは外部ライブラリの検出に ``pkg-config`` を使用しています。"
297
298 msgid "``pkg-config`` is a tool that collects flags and paths required for using external libraries from ``.pc`` files."
299 msgstr "``pkg-config`` は ``.pc`` ファイルを用意するだけで、ライブラリを利用する際に必要となる各種フラグやパスなどを設定してくれるツールです。"
300
301 msgid "When using libraries installed via a package manager, you do not need to specify this parameter because ``.pc`` files for the libraries are in the default search paths of ``pkg-config``."
302 msgstr "パッケージ管理システムを使用してインストールしたライブラリを使いたい場合は、 ``pkg-config`` のデフォルトの検索パスに ``.pc`` ファイルが存在するためこのパラメータを指定する必要はありません。"
303
304 msgid "When using manual built libraries, you need to specify ``.pc`` file paths of those libraries by this parameter."
305 msgstr "自身でビルドしたライブラリを使用したい場合などに、このパラメータにそのライブラリの ``.pc`` ファイルの場所を指定します。"
306
307 msgid "You can use ``PKG_CONFIG_PATH`` as an environment variable, but we recommend to use it as a ``configure`` parameter because of the following reason."
308 msgstr "環境変数 ``PKG_CONFIG_PATH`` を使用することも出来ますが、以下の理由から ``configure`` のパラメータを使用することを推奨します。"
309
310 msgid "``configure`` is generated from ``configure.ac`` by GNU Autotools. And when ``make`` detects that ``configure.ac`` has changed, GNU Autotools automatically regenerates ``configure`` and re-executes it. If you specify ``PKG_CONFIG_PATH`` as a ``configure`` parameter, ``PKG_CONFIG_PATH`` is specified automatically when ``configure`` is re-executed. On the other hand, if you specify ``PKG_CONFIG_PATH`` as an environment variable, ``PKG_CONFIG_PATH`` is not specified automatically."
311 msgstr "GNU Autotools によって ``configure.ac`` から ``configure`` が生成されます。そして、 ``make`` の実行時、 ``configure.ac`` が変わっていることを検知すると、自動で ``configure`` を再生成し再実行します。 ``configure`` のパラメータとして指定すると、この ``configure`` の再実行時に ``PKG_CONFIG_PATH`` が自動で指定されます。 一方、環境変数を使用した場合は ``PKG_CONFIG_PATH`` は自動で指定されません。"
312
313 msgid "Here is an example how to specify a ``.pc`` file path for ``/tmp/local/lib/pkgconfig/arrow.pc``."
314 msgstr "以下は ``/tmp/local/lib/pkgconfig/arrow.pc`` の ``.pc`` ファイルを指定する例です。"
315
316 msgid "``make``"
317 msgstr ""
318
319 msgid "``configure`` is succeeded, you can build Groonga by ``make``::"
320 msgstr "``configure`` が成功したら ``make`` でGroongaをビルドします::"
321
322 msgid "If you have multi cores CPU, you can make faster by using ``-j`` option. If you have 4 cores CPU, it's good for using ``-j4`` option::"
323 msgstr "マルチコアCPUを使っている場合は ``-j`` オプションを使うとより速くmakeを実行できます。もし、4コアのCPUを使っている場合は、 ``-j4`` オプションを使うともっと速くビルドできます::"
324
325 msgid "If you get some errors by ``make``, please report them to us: :doc:`/contribution/report`"
326 msgstr "``make`` で何かエラーが発生した場合は、そのエラーをレポートしてください: :doc:`/contribution/report`"
327
328 msgid "``make install``"
329 msgstr ""
330
331 msgid "Now, you can install built Groonga!::"
332 msgstr "これでビルドしたGroongaをインストールできます!::"
333
334 msgid "If you have write permission for ``${PREFIX}``, you don't need to use ``sudo``. e.g. ``--prefix=$HOME/local`` case. In this case, use ``make install``::"
335 msgstr "``${PREFIX}`` への書き込み権限がある場合は ``sudo`` を使う必要はありません。例えば、 ``--prefix=$HOME/local`` と指定した場合です。この場合は ``make install`` を使ってください::"