| 1 |
/* |
| 2 |
* linux/drivers/message/fusion/mptscsih.c |
| 3 |
* For use with LSI PCI chip/adapter(s) |
| 4 |
* running LSI Fusion MPT (Message Passing Technology) firmware. |
| 5 |
* |
| 6 |
* Copyright (c) 1999-2008 LSI Corporation |
| 7 |
* (mailto:[email protected]) |
| 8 |
* |
| 9 |
*/ |
| 10 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 11 |
/* |
| 12 |
This program is free software; you can redistribute it and/or modify |
| 13 |
it under the terms of the GNU General Public License as published by |
| 14 |
the Free Software Foundation; version 2 of the License. |
| 15 |
|
| 16 |
This program is distributed in the hope that it will be useful, |
| 17 |
but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 18 |
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 19 |
GNU General Public License for more details. |
| 20 |
|
| 21 |
NO WARRANTY |
| 22 |
THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR |
| 23 |
CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT |
| 24 |
LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, |
| 25 |
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is |
| 26 |
solely responsible for determining the appropriateness of using and |
| 27 |
distributing the Program and assumes all risks associated with its |
| 28 |
exercise of rights under this Agreement, including but not limited to |
| 29 |
the risks and costs of program errors, damage to or loss of data, |
| 30 |
programs or equipment, and unavailability or interruption of operations. |
| 31 |
|
| 32 |
DISCLAIMER OF LIABILITY |
| 33 |
NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY |
| 34 |
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| 35 |
DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND |
| 36 |
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR |
| 37 |
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE |
| 38 |
USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED |
| 39 |
HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES |
| 40 |
|
| 41 |
You should have received a copy of the GNU General Public License |
| 42 |
along with this program; if not, write to the Free Software |
| 43 |
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| 44 |
*/ |
| 45 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 46 |
|
| 47 |
#include <linux/module.h> |
| 48 |
#include <linux/kernel.h> |
| 49 |
#include <linux/slab.h> |
| 50 |
#include <linux/init.h> |
| 51 |
#include <linux/errno.h> |
| 52 |
#include <linux/kdev_t.h> |
| 53 |
#include <linux/blkdev.h> |
| 54 |
#include <linux/delay.h> /* for mdelay */ |
| 55 |
#include <linux/interrupt.h> |
| 56 |
#include <linux/reboot.h> /* notifier code */ |
| 57 |
#include <linux/workqueue.h> |
| 58 |
|
| 59 |
#include <scsi/scsi.h> |
| 60 |
#include <scsi/scsi_cmnd.h> |
| 61 |
#include <scsi/scsi_device.h> |
| 62 |
#include <scsi/scsi_host.h> |
| 63 |
#include <scsi/scsi_tcq.h> |
| 64 |
#include <scsi/scsi_dbg.h> |
| 65 |
|
| 66 |
#include "mptbase.h" |
| 67 |
#include "mptscsih.h" |
| 68 |
#include "lsi/mpi_log_sas.h" |
| 69 |
|
| 70 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 71 |
#define my_NAME "Fusion MPT SCSI Host driver" |
| 72 |
#define my_VERSION MPT_LINUX_VERSION_COMMON |
| 73 |
#define MYNAM "mptscsih" |
| 74 |
|
| 75 |
MODULE_AUTHOR(MODULEAUTHOR); |
| 76 |
MODULE_DESCRIPTION(my_NAME); |
| 77 |
MODULE_LICENSE("GPL"); |
| 78 |
MODULE_VERSION(my_VERSION); |
| 79 |
|
| 80 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 81 |
/* |
| 82 |
* Other private/forward protos... |
| 83 |
*/ |
| 84 |
struct scsi_cmnd *mptscsih_get_scsi_lookup(MPT_ADAPTER *ioc, int i); |
| 85 |
static struct scsi_cmnd * mptscsih_getclear_scsi_lookup(MPT_ADAPTER *ioc, int i); |
| 86 |
static void mptscsih_set_scsi_lookup(MPT_ADAPTER *ioc, int i, struct scsi_cmnd *scmd); |
| 87 |
static int SCPNT_TO_LOOKUP_IDX(MPT_ADAPTER *ioc, struct scsi_cmnd *scmd); |
| 88 |
int mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r); |
| 89 |
static void mptscsih_report_queue_full(struct scsi_cmnd *sc, SCSIIOReply_t *pScsiReply, SCSIIORequest_t *pScsiReq); |
| 90 |
int mptscsih_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r); |
| 91 |
|
| 92 |
static int mptscsih_AddSGE(MPT_ADAPTER *ioc, struct scsi_cmnd *SCpnt, |
| 93 |
SCSIIORequest_t *pReq, int req_idx); |
| 94 |
static void mptscsih_freeChainBuffers(MPT_ADAPTER *ioc, int req_idx); |
| 95 |
static void mptscsih_copy_sense_data(struct scsi_cmnd *sc, MPT_SCSI_HOST *hd, MPT_FRAME_HDR *mf, SCSIIOReply_t *pScsiReply); |
| 96 |
|
| 97 |
int mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, |
| 98 |
u64 lun, int ctx2abort, ulong timeout); |
| 99 |
|
| 100 |
int mptscsih_ioc_reset(MPT_ADAPTER *ioc, int post_reset); |
| 101 |
int mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply); |
| 102 |
|
| 103 |
void |
| 104 |
mptscsih_taskmgmt_response_code(MPT_ADAPTER *ioc, u8 response_code); |
| 105 |
static int mptscsih_get_completion_code(MPT_ADAPTER *ioc, |
| 106 |
MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply); |
| 107 |
int mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r); |
| 108 |
static int mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *iocmd); |
| 109 |
static void mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, VirtDevice *vdevice); |
| 110 |
|
| 111 |
static int |
| 112 |
mptscsih_taskmgmt_reply(MPT_ADAPTER *ioc, u8 type, |
| 113 |
SCSITaskMgmtReply_t *pScsiTmReply); |
| 114 |
void mptscsih_remove(struct pci_dev *); |
| 115 |
void mptscsih_shutdown(struct pci_dev *); |
| 116 |
#ifdef CONFIG_PM |
| 117 |
int mptscsih_suspend(struct pci_dev *pdev, pm_message_t state); |
| 118 |
int mptscsih_resume(struct pci_dev *pdev); |
| 119 |
#endif |
| 120 |
|
| 121 |
|
| 122 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 123 |
/* |
| 124 |
* mptscsih_getFreeChainBuffer - Function to get a free chain |
| 125 |
* from the MPT_SCSI_HOST FreeChainQ. |
| 126 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 127 |
* @req_idx: Index of the SCSI IO request frame. (output) |
| 128 |
* |
| 129 |
* return SUCCESS or FAILED |
| 130 |
*/ |
| 131 |
static inline int |
| 132 |
mptscsih_getFreeChainBuffer(MPT_ADAPTER *ioc, int *retIndex) |
| 133 |
{ |
| 134 |
MPT_FRAME_HDR *chainBuf; |
| 135 |
unsigned long flags; |
| 136 |
int rc; |
| 137 |
int chain_idx; |
| 138 |
|
| 139 |
dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "getFreeChainBuffer called\n", |
| 140 |
ioc->name)); |
| 141 |
spin_lock_irqsave(&ioc->FreeQlock, flags); |
| 142 |
if (!list_empty(&ioc->FreeChainQ)) { |
| 143 |
int offset; |
| 144 |
|
| 145 |
chainBuf = list_entry(ioc->FreeChainQ.next, MPT_FRAME_HDR, |
| 146 |
u.frame.linkage.list); |
| 147 |
list_del(&chainBuf->u.frame.linkage.list); |
| 148 |
offset = (u8 *)chainBuf - (u8 *)ioc->ChainBuffer; |
| 149 |
chain_idx = offset / ioc->req_sz; |
| 150 |
rc = SUCCESS; |
| 151 |
dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 152 |
"getFreeChainBuffer chainBuf=%p ChainBuffer=%p offset=%d chain_idx=%d\n", |
| 153 |
ioc->name, chainBuf, ioc->ChainBuffer, offset, chain_idx)); |
| 154 |
} else { |
| 155 |
rc = FAILED; |
| 156 |
chain_idx = MPT_HOST_NO_CHAIN; |
| 157 |
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT "getFreeChainBuffer failed\n", |
| 158 |
ioc->name)); |
| 159 |
} |
| 160 |
spin_unlock_irqrestore(&ioc->FreeQlock, flags); |
| 161 |
|
| 162 |
*retIndex = chain_idx; |
| 163 |
return rc; |
| 164 |
} /* mptscsih_getFreeChainBuffer() */ |
| 165 |
|
| 166 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 167 |
/* |
| 168 |
* mptscsih_AddSGE - Add a SGE (plus chain buffers) to the |
| 169 |
* SCSIIORequest_t Message Frame. |
| 170 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 171 |
* @SCpnt: Pointer to scsi_cmnd structure |
| 172 |
* @pReq: Pointer to SCSIIORequest_t structure |
| 173 |
* |
| 174 |
* Returns ... |
| 175 |
*/ |
| 176 |
static int |
| 177 |
mptscsih_AddSGE(MPT_ADAPTER *ioc, struct scsi_cmnd *SCpnt, |
| 178 |
SCSIIORequest_t *pReq, int req_idx) |
| 179 |
{ |
| 180 |
char *psge; |
| 181 |
char *chainSge; |
| 182 |
struct scatterlist *sg; |
| 183 |
int frm_sz; |
| 184 |
int sges_left, sg_done; |
| 185 |
int chain_idx = MPT_HOST_NO_CHAIN; |
| 186 |
int sgeOffset; |
| 187 |
int numSgeSlots, numSgeThisFrame; |
| 188 |
u32 sgflags, sgdir, thisxfer = 0; |
| 189 |
int chain_dma_off = 0; |
| 190 |
int newIndex; |
| 191 |
int ii; |
| 192 |
dma_addr_t v2; |
| 193 |
u32 RequestNB; |
| 194 |
|
| 195 |
sgdir = le32_to_cpu(pReq->Control) & MPI_SCSIIO_CONTROL_DATADIRECTION_MASK; |
| 196 |
if (sgdir == MPI_SCSIIO_CONTROL_WRITE) { |
| 197 |
sgdir = MPT_TRANSFER_HOST_TO_IOC; |
| 198 |
} else { |
| 199 |
sgdir = MPT_TRANSFER_IOC_TO_HOST; |
| 200 |
} |
| 201 |
|
| 202 |
psge = (char *) &pReq->SGL; |
| 203 |
frm_sz = ioc->req_sz; |
| 204 |
|
| 205 |
/* Map the data portion, if any. |
| 206 |
* sges_left = 0 if no data transfer. |
| 207 |
*/ |
| 208 |
sges_left = scsi_dma_map(SCpnt); |
| 209 |
if (sges_left < 0) |
| 210 |
return FAILED; |
| 211 |
|
| 212 |
/* Handle the SG case. |
| 213 |
*/ |
| 214 |
sg = scsi_sglist(SCpnt); |
| 215 |
sg_done = 0; |
| 216 |
sgeOffset = sizeof(SCSIIORequest_t) - sizeof(SGE_IO_UNION); |
| 217 |
chainSge = NULL; |
| 218 |
|
| 219 |
/* Prior to entering this loop - the following must be set |
| 220 |
* current MF: sgeOffset (bytes) |
| 221 |
* chainSge (Null if original MF is not a chain buffer) |
| 222 |
* sg_done (num SGE done for this MF) |
| 223 |
*/ |
| 224 |
|
| 225 |
nextSGEset: |
| 226 |
numSgeSlots = ((frm_sz - sgeOffset) / ioc->SGE_size); |
| 227 |
numSgeThisFrame = (sges_left < numSgeSlots) ? sges_left : numSgeSlots; |
| 228 |
|
| 229 |
sgflags = MPT_SGE_FLAGS_SIMPLE_ELEMENT | sgdir; |
| 230 |
|
| 231 |
/* Get first (num - 1) SG elements |
| 232 |
* Skip any SG entries with a length of 0 |
| 233 |
* NOTE: at finish, sg and psge pointed to NEXT data/location positions |
| 234 |
*/ |
| 235 |
for (ii=0; ii < (numSgeThisFrame-1); ii++) { |
| 236 |
thisxfer = sg_dma_len(sg); |
| 237 |
if (thisxfer == 0) { |
| 238 |
/* Get next SG element from the OS */ |
| 239 |
sg = sg_next(sg); |
| 240 |
sg_done++; |
| 241 |
continue; |
| 242 |
} |
| 243 |
|
| 244 |
v2 = sg_dma_address(sg); |
| 245 |
ioc->add_sge(psge, sgflags | thisxfer, v2); |
| 246 |
|
| 247 |
/* Get next SG element from the OS */ |
| 248 |
sg = sg_next(sg); |
| 249 |
psge += ioc->SGE_size; |
| 250 |
sgeOffset += ioc->SGE_size; |
| 251 |
sg_done++; |
| 252 |
} |
| 253 |
|
| 254 |
if (numSgeThisFrame == sges_left) { |
| 255 |
/* Add last element, end of buffer and end of list flags. |
| 256 |
*/ |
| 257 |
sgflags |= MPT_SGE_FLAGS_LAST_ELEMENT | |
| 258 |
MPT_SGE_FLAGS_END_OF_BUFFER | |
| 259 |
MPT_SGE_FLAGS_END_OF_LIST; |
| 260 |
|
| 261 |
/* Add last SGE and set termination flags. |
| 262 |
* Note: Last SGE may have a length of 0 - which should be ok. |
| 263 |
*/ |
| 264 |
thisxfer = sg_dma_len(sg); |
| 265 |
|
| 266 |
v2 = sg_dma_address(sg); |
| 267 |
ioc->add_sge(psge, sgflags | thisxfer, v2); |
| 268 |
sgeOffset += ioc->SGE_size; |
| 269 |
sg_done++; |
| 270 |
|
| 271 |
if (chainSge) { |
| 272 |
/* The current buffer is a chain buffer, |
| 273 |
* but there is not another one. |
| 274 |
* Update the chain element |
| 275 |
* Offset and Length fields. |
| 276 |
*/ |
| 277 |
ioc->add_chain((char *)chainSge, 0, sgeOffset, |
| 278 |
ioc->ChainBufferDMA + chain_dma_off); |
| 279 |
} else { |
| 280 |
/* The current buffer is the original MF |
| 281 |
* and there is no Chain buffer. |
| 282 |
*/ |
| 283 |
pReq->ChainOffset = 0; |
| 284 |
RequestNB = (((sgeOffset - 1) >> ioc->NBShiftFactor) + 1) & 0x03; |
| 285 |
dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 286 |
"Single Buffer RequestNB=%x, sgeOffset=%d\n", ioc->name, RequestNB, sgeOffset)); |
| 287 |
ioc->RequestNB[req_idx] = RequestNB; |
| 288 |
} |
| 289 |
} else { |
| 290 |
/* At least one chain buffer is needed. |
| 291 |
* Complete the first MF |
| 292 |
* - last SGE element, set the LastElement bit |
| 293 |
* - set ChainOffset (words) for orig MF |
| 294 |
* (OR finish previous MF chain buffer) |
| 295 |
* - update MFStructPtr ChainIndex |
| 296 |
* - Populate chain element |
| 297 |
* Also |
| 298 |
* Loop until done. |
| 299 |
*/ |
| 300 |
|
| 301 |
dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SG: Chain Required! sg done %d\n", |
| 302 |
ioc->name, sg_done)); |
| 303 |
|
| 304 |
/* Set LAST_ELEMENT flag for last non-chain element |
| 305 |
* in the buffer. Since psge points at the NEXT |
| 306 |
* SGE element, go back one SGE element, update the flags |
| 307 |
* and reset the pointer. (Note: sgflags & thisxfer are already |
| 308 |
* set properly). |
| 309 |
*/ |
| 310 |
if (sg_done) { |
| 311 |
u32 *ptmp = (u32 *) (psge - ioc->SGE_size); |
| 312 |
sgflags = le32_to_cpu(*ptmp); |
| 313 |
sgflags |= MPT_SGE_FLAGS_LAST_ELEMENT; |
| 314 |
*ptmp = cpu_to_le32(sgflags); |
| 315 |
} |
| 316 |
|
| 317 |
if (chainSge) { |
| 318 |
/* The current buffer is a chain buffer. |
| 319 |
* chainSge points to the previous Chain Element. |
| 320 |
* Update its chain element Offset and Length (must |
| 321 |
* include chain element size) fields. |
| 322 |
* Old chain element is now complete. |
| 323 |
*/ |
| 324 |
u8 nextChain = (u8) (sgeOffset >> 2); |
| 325 |
sgeOffset += ioc->SGE_size; |
| 326 |
ioc->add_chain((char *)chainSge, nextChain, sgeOffset, |
| 327 |
ioc->ChainBufferDMA + chain_dma_off); |
| 328 |
} else { |
| 329 |
/* The original MF buffer requires a chain buffer - |
| 330 |
* set the offset. |
| 331 |
* Last element in this MF is a chain element. |
| 332 |
*/ |
| 333 |
pReq->ChainOffset = (u8) (sgeOffset >> 2); |
| 334 |
RequestNB = (((sgeOffset - 1) >> ioc->NBShiftFactor) + 1) & 0x03; |
| 335 |
dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Chain Buffer Needed, RequestNB=%x sgeOffset=%d\n", ioc->name, RequestNB, sgeOffset)); |
| 336 |
ioc->RequestNB[req_idx] = RequestNB; |
| 337 |
} |
| 338 |
|
| 339 |
sges_left -= sg_done; |
| 340 |
|
| 341 |
|
| 342 |
/* NOTE: psge points to the beginning of the chain element |
| 343 |
* in current buffer. Get a chain buffer. |
| 344 |
*/ |
| 345 |
if ((mptscsih_getFreeChainBuffer(ioc, &newIndex)) == FAILED) { |
| 346 |
dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 347 |
"getFreeChainBuffer FAILED SCSI cmd=%02x (%p)\n", |
| 348 |
ioc->name, pReq->CDB[0], SCpnt)); |
| 349 |
return FAILED; |
| 350 |
} |
| 351 |
|
| 352 |
/* Update the tracking arrays. |
| 353 |
* If chainSge == NULL, update ReqToChain, else ChainToChain |
| 354 |
*/ |
| 355 |
if (chainSge) { |
| 356 |
ioc->ChainToChain[chain_idx] = newIndex; |
| 357 |
} else { |
| 358 |
ioc->ReqToChain[req_idx] = newIndex; |
| 359 |
} |
| 360 |
chain_idx = newIndex; |
| 361 |
chain_dma_off = ioc->req_sz * chain_idx; |
| 362 |
|
| 363 |
/* Populate the chainSGE for the current buffer. |
| 364 |
* - Set chain buffer pointer to psge and fill |
| 365 |
* out the Address and Flags fields. |
| 366 |
*/ |
| 367 |
chainSge = (char *) psge; |
| 368 |
dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT " Current buff @ %p (index 0x%x)", |
| 369 |
ioc->name, psge, req_idx)); |
| 370 |
|
| 371 |
/* Start the SGE for the next buffer |
| 372 |
*/ |
| 373 |
psge = (char *) (ioc->ChainBuffer + chain_dma_off); |
| 374 |
sgeOffset = 0; |
| 375 |
sg_done = 0; |
| 376 |
|
| 377 |
dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT " Chain buff @ %p (index 0x%x)\n", |
| 378 |
ioc->name, psge, chain_idx)); |
| 379 |
|
| 380 |
/* Start the SGE for the next buffer |
| 381 |
*/ |
| 382 |
|
| 383 |
goto nextSGEset; |
| 384 |
} |
| 385 |
|
| 386 |
return SUCCESS; |
| 387 |
} /* mptscsih_AddSGE() */ |
| 388 |
|
| 389 |
static void |
| 390 |
mptscsih_issue_sep_command(MPT_ADAPTER *ioc, VirtTarget *vtarget, |
| 391 |
U32 SlotStatus) |
| 392 |
{ |
| 393 |
MPT_FRAME_HDR *mf; |
| 394 |
SEPRequest_t *SEPMsg; |
| 395 |
|
| 396 |
if (ioc->bus_type != SAS) |
| 397 |
return; |
| 398 |
|
| 399 |
/* Not supported for hidden raid components |
| 400 |
*/ |
| 401 |
if (vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT) |
| 402 |
return; |
| 403 |
|
| 404 |
if ((mf = mpt_get_msg_frame(ioc->InternalCtx, ioc)) == NULL) { |
| 405 |
dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: no msg frames!!\n", |
| 406 |
ioc->name,__func__)); |
| 407 |
return; |
| 408 |
} |
| 409 |
|
| 410 |
SEPMsg = (SEPRequest_t *)mf; |
| 411 |
SEPMsg->Function = MPI_FUNCTION_SCSI_ENCLOSURE_PROCESSOR; |
| 412 |
SEPMsg->Bus = vtarget->channel; |
| 413 |
SEPMsg->TargetID = vtarget->id; |
| 414 |
SEPMsg->Action = MPI_SEP_REQ_ACTION_WRITE_STATUS; |
| 415 |
SEPMsg->SlotStatus = SlotStatus; |
| 416 |
devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 417 |
"Sending SEP cmd=%x channel=%d id=%d\n", |
| 418 |
ioc->name, SlotStatus, SEPMsg->Bus, SEPMsg->TargetID)); |
| 419 |
mpt_put_msg_frame(ioc->DoneCtx, ioc, mf); |
| 420 |
} |
| 421 |
|
| 422 |
#ifdef CONFIG_FUSION_LOGGING |
| 423 |
/** |
| 424 |
* mptscsih_info_scsiio - debug print info on reply frame |
| 425 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 426 |
* @sc: original scsi cmnd pointer |
| 427 |
* @pScsiReply: Pointer to MPT reply frame |
| 428 |
* |
| 429 |
* MPT_DEBUG_REPLY needs to be enabled to obtain this info |
| 430 |
* |
| 431 |
* Refer to lsi/mpi.h. |
| 432 |
**/ |
| 433 |
static void |
| 434 |
mptscsih_info_scsiio(MPT_ADAPTER *ioc, struct scsi_cmnd *sc, SCSIIOReply_t * pScsiReply) |
| 435 |
{ |
| 436 |
char *desc = NULL; |
| 437 |
char *desc1 = NULL; |
| 438 |
u16 ioc_status; |
| 439 |
u8 skey, asc, ascq; |
| 440 |
|
| 441 |
ioc_status = le16_to_cpu(pScsiReply->IOCStatus) & MPI_IOCSTATUS_MASK; |
| 442 |
|
| 443 |
switch (ioc_status) { |
| 444 |
|
| 445 |
case MPI_IOCSTATUS_SUCCESS: |
| 446 |
desc = "success"; |
| 447 |
break; |
| 448 |
case MPI_IOCSTATUS_SCSI_INVALID_BUS: |
| 449 |
desc = "invalid bus"; |
| 450 |
break; |
| 451 |
case MPI_IOCSTATUS_SCSI_INVALID_TARGETID: |
| 452 |
desc = "invalid target_id"; |
| 453 |
break; |
| 454 |
case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: |
| 455 |
desc = "device not there"; |
| 456 |
break; |
| 457 |
case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: |
| 458 |
desc = "data overrun"; |
| 459 |
break; |
| 460 |
case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: |
| 461 |
desc = "data underrun"; |
| 462 |
break; |
| 463 |
case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: |
| 464 |
desc = "I/O data error"; |
| 465 |
break; |
| 466 |
case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: |
| 467 |
desc = "protocol error"; |
| 468 |
break; |
| 469 |
case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: |
| 470 |
desc = "task terminated"; |
| 471 |
break; |
| 472 |
case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: |
| 473 |
desc = "residual mismatch"; |
| 474 |
break; |
| 475 |
case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: |
| 476 |
desc = "task management failed"; |
| 477 |
break; |
| 478 |
case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: |
| 479 |
desc = "IOC terminated"; |
| 480 |
break; |
| 481 |
case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: |
| 482 |
desc = "ext terminated"; |
| 483 |
break; |
| 484 |
default: |
| 485 |
desc = ""; |
| 486 |
break; |
| 487 |
} |
| 488 |
|
| 489 |
switch (pScsiReply->SCSIStatus) |
| 490 |
{ |
| 491 |
|
| 492 |
case MPI_SCSI_STATUS_SUCCESS: |
| 493 |
desc1 = "success"; |
| 494 |
break; |
| 495 |
case MPI_SCSI_STATUS_CHECK_CONDITION: |
| 496 |
desc1 = "check condition"; |
| 497 |
break; |
| 498 |
case MPI_SCSI_STATUS_CONDITION_MET: |
| 499 |
desc1 = "condition met"; |
| 500 |
break; |
| 501 |
case MPI_SCSI_STATUS_BUSY: |
| 502 |
desc1 = "busy"; |
| 503 |
break; |
| 504 |
case MPI_SCSI_STATUS_INTERMEDIATE: |
| 505 |
desc1 = "intermediate"; |
| 506 |
break; |
| 507 |
case MPI_SCSI_STATUS_INTERMEDIATE_CONDMET: |
| 508 |
desc1 = "intermediate condmet"; |
| 509 |
break; |
| 510 |
case MPI_SCSI_STATUS_RESERVATION_CONFLICT: |
| 511 |
desc1 = "reservation conflict"; |
| 512 |
break; |
| 513 |
case MPI_SCSI_STATUS_COMMAND_TERMINATED: |
| 514 |
desc1 = "command terminated"; |
| 515 |
break; |
| 516 |
case MPI_SCSI_STATUS_TASK_SET_FULL: |
| 517 |
desc1 = "task set full"; |
| 518 |
break; |
| 519 |
case MPI_SCSI_STATUS_ACA_ACTIVE: |
| 520 |
desc1 = "aca active"; |
| 521 |
break; |
| 522 |
case MPI_SCSI_STATUS_FCPEXT_DEVICE_LOGGED_OUT: |
| 523 |
desc1 = "fcpext device logged out"; |
| 524 |
break; |
| 525 |
case MPI_SCSI_STATUS_FCPEXT_NO_LINK: |
| 526 |
desc1 = "fcpext no link"; |
| 527 |
break; |
| 528 |
case MPI_SCSI_STATUS_FCPEXT_UNASSIGNED: |
| 529 |
desc1 = "fcpext unassigned"; |
| 530 |
break; |
| 531 |
default: |
| 532 |
desc1 = ""; |
| 533 |
break; |
| 534 |
} |
| 535 |
|
| 536 |
scsi_print_command(sc); |
| 537 |
printk(MYIOC_s_DEBUG_FMT "\tfw_channel = %d, fw_id = %d, lun = %llu\n", |
| 538 |
ioc->name, pScsiReply->Bus, pScsiReply->TargetID, sc->device->lun); |
| 539 |
printk(MYIOC_s_DEBUG_FMT "\trequest_len = %d, underflow = %d, " |
| 540 |
"resid = %d\n", ioc->name, scsi_bufflen(sc), sc->underflow, |
| 541 |
scsi_get_resid(sc)); |
| 542 |
printk(MYIOC_s_DEBUG_FMT "\ttag = %d, transfer_count = %d, " |
| 543 |
"sc->result = %08X\n", ioc->name, le16_to_cpu(pScsiReply->TaskTag), |
| 544 |
le32_to_cpu(pScsiReply->TransferCount), sc->result); |
| 545 |
|
| 546 |
printk(MYIOC_s_DEBUG_FMT "\tiocstatus = %s (0x%04x), " |
| 547 |
"scsi_status = %s (0x%02x), scsi_state = (0x%02x)\n", |
| 548 |
ioc->name, desc, ioc_status, desc1, pScsiReply->SCSIStatus, |
| 549 |
pScsiReply->SCSIState); |
| 550 |
|
| 551 |
if (pScsiReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_VALID) { |
| 552 |
skey = sc->sense_buffer[2] & 0x0F; |
| 553 |
asc = sc->sense_buffer[12]; |
| 554 |
ascq = sc->sense_buffer[13]; |
| 555 |
|
| 556 |
printk(MYIOC_s_DEBUG_FMT "\t[sense_key,asc,ascq]: " |
| 557 |
"[0x%02x,0x%02x,0x%02x]\n", ioc->name, skey, asc, ascq); |
| 558 |
} |
| 559 |
|
| 560 |
/* |
| 561 |
* Look for + dump FCP ResponseInfo[]! |
| 562 |
*/ |
| 563 |
if (pScsiReply->SCSIState & MPI_SCSI_STATE_RESPONSE_INFO_VALID && |
| 564 |
pScsiReply->ResponseInfo) |
| 565 |
printk(MYIOC_s_DEBUG_FMT "response_info = %08xh\n", |
| 566 |
ioc->name, le32_to_cpu(pScsiReply->ResponseInfo)); |
| 567 |
} |
| 568 |
#endif |
| 569 |
|
| 570 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 571 |
/* |
| 572 |
* mptscsih_io_done - Main SCSI IO callback routine registered to |
| 573 |
* Fusion MPT (base) driver |
| 574 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 575 |
* @mf: Pointer to original MPT request frame |
| 576 |
* @r: Pointer to MPT reply frame (NULL if TurboReply) |
| 577 |
* |
| 578 |
* This routine is called from mpt.c::mpt_interrupt() at the completion |
| 579 |
* of any SCSI IO request. |
| 580 |
* This routine is registered with the Fusion MPT (base) driver at driver |
| 581 |
* load/init time via the mpt_register() API call. |
| 582 |
* |
| 583 |
* Returns 1 indicating alloc'd request frame ptr should be freed. |
| 584 |
*/ |
| 585 |
int |
| 586 |
mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr) |
| 587 |
{ |
| 588 |
struct scsi_cmnd *sc; |
| 589 |
MPT_SCSI_HOST *hd; |
| 590 |
SCSIIORequest_t *pScsiReq; |
| 591 |
SCSIIOReply_t *pScsiReply; |
| 592 |
u16 req_idx, req_idx_MR; |
| 593 |
VirtDevice *vdevice; |
| 594 |
VirtTarget *vtarget; |
| 595 |
|
| 596 |
hd = shost_priv(ioc->sh); |
| 597 |
req_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx); |
| 598 |
req_idx_MR = (mr != NULL) ? |
| 599 |
le16_to_cpu(mr->u.frame.hwhdr.msgctxu.fld.req_idx) : req_idx; |
| 600 |
|
| 601 |
/* Special case, where already freed message frame is received from |
| 602 |
* Firmware. It happens with Resetting IOC. |
| 603 |
* Return immediately. Do not care |
| 604 |
*/ |
| 605 |
if ((req_idx != req_idx_MR) || |
| 606 |
(le32_to_cpu(mf->u.frame.linkage.arg1) == 0xdeadbeaf)) |
| 607 |
return 0; |
| 608 |
|
| 609 |
sc = mptscsih_getclear_scsi_lookup(ioc, req_idx); |
| 610 |
if (sc == NULL) { |
| 611 |
MPIHeader_t *hdr = (MPIHeader_t *)mf; |
| 612 |
|
| 613 |
/* Remark: writeSDP1 will use the ScsiDoneCtx |
| 614 |
* If a SCSI I/O cmd, device disabled by OS and |
| 615 |
* completion done. Cannot touch sc struct. Just free mem. |
| 616 |
*/ |
| 617 |
if (hdr->Function == MPI_FUNCTION_SCSI_IO_REQUEST) |
| 618 |
printk(MYIOC_s_ERR_FMT "NULL ScsiCmd ptr!\n", |
| 619 |
ioc->name); |
| 620 |
|
| 621 |
mptscsih_freeChainBuffers(ioc, req_idx); |
| 622 |
return 1; |
| 623 |
} |
| 624 |
|
| 625 |
if ((unsigned char *)mf != sc->host_scribble) { |
| 626 |
mptscsih_freeChainBuffers(ioc, req_idx); |
| 627 |
return 1; |
| 628 |
} |
| 629 |
|
| 630 |
if (ioc->bus_type == SAS) { |
| 631 |
VirtDevice *vdevice = sc->device->hostdata; |
| 632 |
|
| 633 |
if (!vdevice || !vdevice->vtarget || |
| 634 |
vdevice->vtarget->deleted) { |
| 635 |
sc->result = DID_NO_CONNECT << 16; |
| 636 |
goto out; |
| 637 |
} |
| 638 |
} |
| 639 |
|
| 640 |
sc->host_scribble = NULL; |
| 641 |
sc->result = DID_OK << 16; /* Set default reply as OK */ |
| 642 |
pScsiReq = (SCSIIORequest_t *) mf; |
| 643 |
pScsiReply = (SCSIIOReply_t *) mr; |
| 644 |
|
| 645 |
if((ioc->facts.MsgVersion >= MPI_VERSION_01_05) && pScsiReply){ |
| 646 |
dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 647 |
"ScsiDone (mf=%p,mr=%p,sc=%p,idx=%d,task-tag=%d)\n", |
| 648 |
ioc->name, mf, mr, sc, req_idx, pScsiReply->TaskTag)); |
| 649 |
}else{ |
| 650 |
dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 651 |
"ScsiDone (mf=%p,mr=%p,sc=%p,idx=%d)\n", |
| 652 |
ioc->name, mf, mr, sc, req_idx)); |
| 653 |
} |
| 654 |
|
| 655 |
if (pScsiReply == NULL) { |
| 656 |
/* special context reply handling */ |
| 657 |
; |
| 658 |
} else { |
| 659 |
u32 xfer_cnt; |
| 660 |
u16 status; |
| 661 |
u8 scsi_state, scsi_status; |
| 662 |
u32 log_info; |
| 663 |
|
| 664 |
status = le16_to_cpu(pScsiReply->IOCStatus) & MPI_IOCSTATUS_MASK; |
| 665 |
|
| 666 |
scsi_state = pScsiReply->SCSIState; |
| 667 |
scsi_status = pScsiReply->SCSIStatus; |
| 668 |
xfer_cnt = le32_to_cpu(pScsiReply->TransferCount); |
| 669 |
scsi_set_resid(sc, scsi_bufflen(sc) - xfer_cnt); |
| 670 |
log_info = le32_to_cpu(pScsiReply->IOCLogInfo); |
| 671 |
|
| 672 |
/* |
| 673 |
* if we get a data underrun indication, yet no data was |
| 674 |
* transferred and the SCSI status indicates that the |
| 675 |
* command was never started, change the data underrun |
| 676 |
* to success |
| 677 |
*/ |
| 678 |
if (status == MPI_IOCSTATUS_SCSI_DATA_UNDERRUN && xfer_cnt == 0 && |
| 679 |
(scsi_status == MPI_SCSI_STATUS_BUSY || |
| 680 |
scsi_status == MPI_SCSI_STATUS_RESERVATION_CONFLICT || |
| 681 |
scsi_status == MPI_SCSI_STATUS_TASK_SET_FULL)) { |
| 682 |
status = MPI_IOCSTATUS_SUCCESS; |
| 683 |
} |
| 684 |
|
| 685 |
if (scsi_state & MPI_SCSI_STATE_AUTOSENSE_VALID) |
| 686 |
mptscsih_copy_sense_data(sc, hd, mf, pScsiReply); |
| 687 |
|
| 688 |
/* |
| 689 |
* Look for + dump FCP ResponseInfo[]! |
| 690 |
*/ |
| 691 |
if (scsi_state & MPI_SCSI_STATE_RESPONSE_INFO_VALID && |
| 692 |
pScsiReply->ResponseInfo) { |
| 693 |
printk(MYIOC_s_NOTE_FMT "[%d:%d:%d:%llu] " |
| 694 |
"FCP_ResponseInfo=%08xh\n", ioc->name, |
| 695 |
sc->device->host->host_no, sc->device->channel, |
| 696 |
sc->device->id, sc->device->lun, |
| 697 |
le32_to_cpu(pScsiReply->ResponseInfo)); |
| 698 |
} |
| 699 |
|
| 700 |
switch(status) { |
| 701 |
case MPI_IOCSTATUS_BUSY: /* 0x0002 */ |
| 702 |
case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES: /* 0x0006 */ |
| 703 |
/* CHECKME! |
| 704 |
* Maybe: DRIVER_BUSY | SUGGEST_RETRY | DID_SOFT_ERROR (retry) |
| 705 |
* But not: DID_BUS_BUSY lest one risk |
| 706 |
* killing interrupt handler:-( |
| 707 |
*/ |
| 708 |
sc->result = SAM_STAT_BUSY; |
| 709 |
break; |
| 710 |
|
| 711 |
case MPI_IOCSTATUS_SCSI_INVALID_BUS: /* 0x0041 */ |
| 712 |
case MPI_IOCSTATUS_SCSI_INVALID_TARGETID: /* 0x0042 */ |
| 713 |
sc->result = DID_BAD_TARGET << 16; |
| 714 |
break; |
| 715 |
|
| 716 |
case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */ |
| 717 |
/* Spoof to SCSI Selection Timeout! */ |
| 718 |
if (ioc->bus_type != FC) |
| 719 |
sc->result = DID_NO_CONNECT << 16; |
| 720 |
/* else fibre, just stall until rescan event */ |
| 721 |
else |
| 722 |
sc->result = DID_REQUEUE << 16; |
| 723 |
|
| 724 |
if (hd->sel_timeout[pScsiReq->TargetID] < 0xFFFF) |
| 725 |
hd->sel_timeout[pScsiReq->TargetID]++; |
| 726 |
|
| 727 |
vdevice = sc->device->hostdata; |
| 728 |
if (!vdevice) |
| 729 |
break; |
| 730 |
vtarget = vdevice->vtarget; |
| 731 |
if (vtarget->tflags & MPT_TARGET_FLAGS_LED_ON) { |
| 732 |
mptscsih_issue_sep_command(ioc, vtarget, |
| 733 |
MPI_SEP_REQ_SLOTSTATUS_UNCONFIGURED); |
| 734 |
vtarget->tflags &= ~MPT_TARGET_FLAGS_LED_ON; |
| 735 |
} |
| 736 |
break; |
| 737 |
|
| 738 |
case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */ |
| 739 |
if ( ioc->bus_type == SAS ) { |
| 740 |
u16 ioc_status = |
| 741 |
le16_to_cpu(pScsiReply->IOCStatus); |
| 742 |
if ((ioc_status & |
| 743 |
MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) |
| 744 |
&& |
| 745 |
((log_info & SAS_LOGINFO_MASK) == |
| 746 |
SAS_LOGINFO_NEXUS_LOSS)) { |
| 747 |
VirtDevice *vdevice = |
| 748 |
sc->device->hostdata; |
| 749 |
|
| 750 |
/* flag the device as being in |
| 751 |
* device removal delay so we can |
| 752 |
* notify the midlayer to hold off |
| 753 |
* on timeout eh */ |
| 754 |
if (vdevice && vdevice-> |
| 755 |
vtarget && |
| 756 |
vdevice->vtarget-> |
| 757 |
raidVolume) |
| 758 |
printk(KERN_INFO |
| 759 |
"Skipping Raid Volume" |
| 760 |
"for inDMD\n"); |
| 761 |
else if (vdevice && |
| 762 |
vdevice->vtarget) |
| 763 |
vdevice->vtarget-> |
| 764 |
inDMD = 1; |
| 765 |
|
| 766 |
sc->result = |
| 767 |
(DID_TRANSPORT_DISRUPTED |
| 768 |
<< 16); |
| 769 |
break; |
| 770 |
} |
| 771 |
} else if (ioc->bus_type == FC) { |
| 772 |
/* |
| 773 |
* The FC IOC may kill a request for variety of |
| 774 |
* reasons, some of which may be recovered by a |
| 775 |
* retry, some which are unlikely to be |
| 776 |
* recovered. Return DID_ERROR instead of |
| 777 |
* DID_RESET to permit retry of the command, |
| 778 |
* just not an infinite number of them |
| 779 |
*/ |
| 780 |
sc->result = DID_ERROR << 16; |
| 781 |
break; |
| 782 |
} |
| 783 |
|
| 784 |
/* |
| 785 |
* Allow non-SAS & non-NEXUS_LOSS to drop into below code |
| 786 |
*/ |
| 787 |
fallthrough; |
| 788 |
|
| 789 |
case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */ |
| 790 |
/* Linux handles an unsolicited DID_RESET better |
| 791 |
* than an unsolicited DID_ABORT. |
| 792 |
*/ |
| 793 |
sc->result = DID_RESET << 16; |
| 794 |
break; |
| 795 |
|
| 796 |
case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */ |
| 797 |
if (ioc->bus_type == FC) |
| 798 |
sc->result = DID_ERROR << 16; |
| 799 |
else |
| 800 |
sc->result = DID_RESET << 16; |
| 801 |
break; |
| 802 |
|
| 803 |
case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* 0x0049 */ |
| 804 |
scsi_set_resid(sc, scsi_bufflen(sc) - xfer_cnt); |
| 805 |
if((xfer_cnt==0)||(sc->underflow > xfer_cnt)) |
| 806 |
sc->result=DID_SOFT_ERROR << 16; |
| 807 |
else /* Sufficient data transfer occurred */ |
| 808 |
sc->result = (DID_OK << 16) | scsi_status; |
| 809 |
dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 810 |
"RESIDUAL_MISMATCH: result=%x on channel=%d id=%d\n", |
| 811 |
ioc->name, sc->result, sc->device->channel, sc->device->id)); |
| 812 |
break; |
| 813 |
|
| 814 |
case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */ |
| 815 |
/* |
| 816 |
* Do upfront check for valid SenseData and give it |
| 817 |
* precedence! |
| 818 |
*/ |
| 819 |
sc->result = (DID_OK << 16) | scsi_status; |
| 820 |
if (!(scsi_state & MPI_SCSI_STATE_AUTOSENSE_VALID)) { |
| 821 |
|
| 822 |
/* |
| 823 |
* For an Errata on LSI53C1030 |
| 824 |
* When the length of request data |
| 825 |
* and transfer data are different |
| 826 |
* with result of command (READ or VERIFY), |
| 827 |
* DID_SOFT_ERROR is set. |
| 828 |
*/ |
| 829 |
if (ioc->bus_type == SPI) { |
| 830 |
if ((pScsiReq->CDB[0] == READ_6 && ((pScsiReq->CDB[1] & 0x02) == 0)) || |
| 831 |
pScsiReq->CDB[0] == READ_10 || |
| 832 |
pScsiReq->CDB[0] == READ_12 || |
| 833 |
(pScsiReq->CDB[0] == READ_16 && |
| 834 |
((pScsiReq->CDB[1] & 0x02) == 0)) || |
| 835 |
pScsiReq->CDB[0] == VERIFY || |
| 836 |
pScsiReq->CDB[0] == VERIFY_16) { |
| 837 |
if (scsi_bufflen(sc) != |
| 838 |
xfer_cnt) { |
| 839 |
sc->result = |
| 840 |
DID_SOFT_ERROR << 16; |
| 841 |
printk(KERN_WARNING "Errata" |
| 842 |
"on LSI53C1030 occurred." |
| 843 |
"sc->req_bufflen=0x%02x," |
| 844 |
"xfer_cnt=0x%02x\n", |
| 845 |
scsi_bufflen(sc), |
| 846 |
xfer_cnt); |
| 847 |
} |
| 848 |
} |
| 849 |
} |
| 850 |
|
| 851 |
if (xfer_cnt < sc->underflow) { |
| 852 |
if (scsi_status == SAM_STAT_BUSY) |
| 853 |
sc->result = SAM_STAT_BUSY; |
| 854 |
else |
| 855 |
sc->result = DID_SOFT_ERROR << 16; |
| 856 |
} |
| 857 |
if (scsi_state & (MPI_SCSI_STATE_AUTOSENSE_FAILED | MPI_SCSI_STATE_NO_SCSI_STATUS)) { |
| 858 |
/* What to do? |
| 859 |
*/ |
| 860 |
sc->result = DID_SOFT_ERROR << 16; |
| 861 |
} |
| 862 |
else if (scsi_state & MPI_SCSI_STATE_TERMINATED) { |
| 863 |
/* Not real sure here either... */ |
| 864 |
sc->result = DID_RESET << 16; |
| 865 |
} |
| 866 |
} |
| 867 |
|
| 868 |
|
| 869 |
dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 870 |
" sc->underflow={report ERR if < %02xh bytes xfer'd}\n", |
| 871 |
ioc->name, sc->underflow)); |
| 872 |
dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 873 |
" ActBytesXferd=%02xh\n", ioc->name, xfer_cnt)); |
| 874 |
|
| 875 |
/* Report Queue Full |
| 876 |
*/ |
| 877 |
if (scsi_status == MPI_SCSI_STATUS_TASK_SET_FULL) |
| 878 |
mptscsih_report_queue_full(sc, pScsiReply, pScsiReq); |
| 879 |
|
| 880 |
break; |
| 881 |
|
| 882 |
case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */ |
| 883 |
scsi_set_resid(sc, 0); |
| 884 |
fallthrough; |
| 885 |
case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */ |
| 886 |
case MPI_IOCSTATUS_SUCCESS: /* 0x0000 */ |
| 887 |
sc->result = (DID_OK << 16) | scsi_status; |
| 888 |
if (scsi_state == 0) { |
| 889 |
; |
| 890 |
} else if (scsi_state & |
| 891 |
MPI_SCSI_STATE_AUTOSENSE_VALID) { |
| 892 |
|
| 893 |
/* |
| 894 |
* For potential trouble on LSI53C1030. |
| 895 |
* (date:2007.xx.) |
| 896 |
* It is checked whether the length of |
| 897 |
* request data is equal to |
| 898 |
* the length of transfer and residual. |
| 899 |
* MEDIUM_ERROR is set by incorrect data. |
| 900 |
*/ |
| 901 |
if ((ioc->bus_type == SPI) && |
| 902 |
(sc->sense_buffer[2] & 0x20)) { |
| 903 |
u32 difftransfer; |
| 904 |
difftransfer = |
| 905 |
sc->sense_buffer[3] << 24 | |
| 906 |
sc->sense_buffer[4] << 16 | |
| 907 |
sc->sense_buffer[5] << 8 | |
| 908 |
sc->sense_buffer[6]; |
| 909 |
if (((sc->sense_buffer[3] & 0x80) == |
| 910 |
0x80) && (scsi_bufflen(sc) |
| 911 |
!= xfer_cnt)) { |
| 912 |
sc->sense_buffer[2] = |
| 913 |
MEDIUM_ERROR; |
| 914 |
sc->sense_buffer[12] = 0xff; |
| 915 |
sc->sense_buffer[13] = 0xff; |
| 916 |
printk(KERN_WARNING"Errata" |
| 917 |
"on LSI53C1030 occurred." |
| 918 |
"sc->req_bufflen=0x%02x," |
| 919 |
"xfer_cnt=0x%02x\n" , |
| 920 |
scsi_bufflen(sc), |
| 921 |
xfer_cnt); |
| 922 |
} |
| 923 |
if (((sc->sense_buffer[3] & 0x80) |
| 924 |
!= 0x80) && |
| 925 |
(scsi_bufflen(sc) != |
| 926 |
xfer_cnt + difftransfer)) { |
| 927 |
sc->sense_buffer[2] = |
| 928 |
MEDIUM_ERROR; |
| 929 |
sc->sense_buffer[12] = 0xff; |
| 930 |
sc->sense_buffer[13] = 0xff; |
| 931 |
printk(KERN_WARNING |
| 932 |
"Errata on LSI53C1030 occurred" |
| 933 |
"sc->req_bufflen=0x%02x," |
| 934 |
" xfer_cnt=0x%02x," |
| 935 |
"difftransfer=0x%02x\n", |
| 936 |
scsi_bufflen(sc), |
| 937 |
xfer_cnt, |
| 938 |
difftransfer); |
| 939 |
} |
| 940 |
} |
| 941 |
|
| 942 |
/* |
| 943 |
* If running against circa 200003dd 909 MPT f/w, |
| 944 |
* may get this (AUTOSENSE_VALID) for actual TASK_SET_FULL |
| 945 |
* (QUEUE_FULL) returned from device! --> get 0x0000?128 |
| 946 |
* and with SenseBytes set to 0. |
| 947 |
*/ |
| 948 |
if (pScsiReply->SCSIStatus == MPI_SCSI_STATUS_TASK_SET_FULL) |
| 949 |
mptscsih_report_queue_full(sc, pScsiReply, pScsiReq); |
| 950 |
|
| 951 |
} |
| 952 |
else if (scsi_state & |
| 953 |
(MPI_SCSI_STATE_AUTOSENSE_FAILED | MPI_SCSI_STATE_NO_SCSI_STATUS) |
| 954 |
) { |
| 955 |
/* |
| 956 |
* What to do? |
| 957 |
*/ |
| 958 |
sc->result = DID_SOFT_ERROR << 16; |
| 959 |
} |
| 960 |
else if (scsi_state & MPI_SCSI_STATE_TERMINATED) { |
| 961 |
/* Not real sure here either... */ |
| 962 |
sc->result = DID_RESET << 16; |
| 963 |
} |
| 964 |
else if (scsi_state & MPI_SCSI_STATE_QUEUE_TAG_REJECTED) { |
| 965 |
/* Device Inq. data indicates that it supports |
| 966 |
* QTags, but rejects QTag messages. |
| 967 |
* This command completed OK. |
| 968 |
* |
| 969 |
* Not real sure here either so do nothing... */ |
| 970 |
} |
| 971 |
|
| 972 |
if (sc->result == MPI_SCSI_STATUS_TASK_SET_FULL) |
| 973 |
mptscsih_report_queue_full(sc, pScsiReply, pScsiReq); |
| 974 |
|
| 975 |
/* Add handling of: |
| 976 |
* Reservation Conflict, Busy, |
| 977 |
* Command Terminated, CHECK |
| 978 |
*/ |
| 979 |
break; |
| 980 |
|
| 981 |
case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */ |
| 982 |
sc->result = DID_SOFT_ERROR << 16; |
| 983 |
break; |
| 984 |
|
| 985 |
case MPI_IOCSTATUS_INVALID_FUNCTION: /* 0x0001 */ |
| 986 |
case MPI_IOCSTATUS_INVALID_SGL: /* 0x0003 */ |
| 987 |
case MPI_IOCSTATUS_INTERNAL_ERROR: /* 0x0004 */ |
| 988 |
case MPI_IOCSTATUS_RESERVED: /* 0x0005 */ |
| 989 |
case MPI_IOCSTATUS_INVALID_FIELD: /* 0x0007 */ |
| 990 |
case MPI_IOCSTATUS_INVALID_STATE: /* 0x0008 */ |
| 991 |
case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */ |
| 992 |
case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: /* 0x004A */ |
| 993 |
default: |
| 994 |
/* |
| 995 |
* What to do? |
| 996 |
*/ |
| 997 |
sc->result = DID_SOFT_ERROR << 16; |
| 998 |
break; |
| 999 |
|
| 1000 |
} /* switch(status) */ |
| 1001 |
|
| 1002 |
#ifdef CONFIG_FUSION_LOGGING |
| 1003 |
if (sc->result && (ioc->debug_level & MPT_DEBUG_REPLY)) |
| 1004 |
mptscsih_info_scsiio(ioc, sc, pScsiReply); |
| 1005 |
#endif |
| 1006 |
|
| 1007 |
} /* end of address reply case */ |
| 1008 |
out: |
| 1009 |
/* Unmap the DMA buffers, if any. */ |
| 1010 |
scsi_dma_unmap(sc); |
| 1011 |
|
| 1012 |
scsi_done(sc); /* Issue the command callback */ |
| 1013 |
|
| 1014 |
/* Free Chain buffers */ |
| 1015 |
mptscsih_freeChainBuffers(ioc, req_idx); |
| 1016 |
return 1; |
| 1017 |
} |
| 1018 |
|
| 1019 |
/* |
| 1020 |
* mptscsih_flush_running_cmds - For each command found, search |
| 1021 |
* Scsi_Host instance taskQ and reply to OS. |
| 1022 |
* Called only if recovering from a FW reload. |
| 1023 |
* @hd: Pointer to a SCSI HOST structure |
| 1024 |
* |
| 1025 |
* Returns: None. |
| 1026 |
* |
| 1027 |
* Must be called while new I/Os are being queued. |
| 1028 |
*/ |
| 1029 |
void |
| 1030 |
mptscsih_flush_running_cmds(MPT_SCSI_HOST *hd) |
| 1031 |
{ |
| 1032 |
MPT_ADAPTER *ioc = hd->ioc; |
| 1033 |
struct scsi_cmnd *sc; |
| 1034 |
SCSIIORequest_t *mf = NULL; |
| 1035 |
int ii; |
| 1036 |
int channel, id; |
| 1037 |
|
| 1038 |
for (ii= 0; ii < ioc->req_depth; ii++) { |
| 1039 |
sc = mptscsih_getclear_scsi_lookup(ioc, ii); |
| 1040 |
if (!sc) |
| 1041 |
continue; |
| 1042 |
mf = (SCSIIORequest_t *)MPT_INDEX_2_MFPTR(ioc, ii); |
| 1043 |
if (!mf) |
| 1044 |
continue; |
| 1045 |
channel = mf->Bus; |
| 1046 |
id = mf->TargetID; |
| 1047 |
mptscsih_freeChainBuffers(ioc, ii); |
| 1048 |
mpt_free_msg_frame(ioc, (MPT_FRAME_HDR *)mf); |
| 1049 |
if ((unsigned char *)mf != sc->host_scribble) |
| 1050 |
continue; |
| 1051 |
scsi_dma_unmap(sc); |
| 1052 |
sc->result = DID_RESET << 16; |
| 1053 |
sc->host_scribble = NULL; |
| 1054 |
dtmprintk(ioc, sdev_printk(KERN_INFO, sc->device, MYIOC_s_FMT |
| 1055 |
"completing cmds: fw_channel %d, fw_id %d, sc=%p, mf = %p, " |
| 1056 |
"idx=%x\n", ioc->name, channel, id, sc, mf, ii)); |
| 1057 |
scsi_done(sc); |
| 1058 |
} |
| 1059 |
} |
| 1060 |
EXPORT_SYMBOL(mptscsih_flush_running_cmds); |
| 1061 |
|
| 1062 |
/* |
| 1063 |
* mptscsih_search_running_cmds - Delete any commands associated |
| 1064 |
* with the specified target and lun. Function called only |
| 1065 |
* when a lun is disable by mid-layer. |
| 1066 |
* Do NOT access the referenced scsi_cmnd structure or |
| 1067 |
* members. Will cause either a paging or NULL ptr error. |
| 1068 |
* (BUT, BUT, BUT, the code does reference it! - mdr) |
| 1069 |
* @hd: Pointer to a SCSI HOST structure |
| 1070 |
* @vdevice: per device private data |
| 1071 |
* |
| 1072 |
* Returns: None. |
| 1073 |
* |
| 1074 |
* Called from sdev_destroy. |
| 1075 |
*/ |
| 1076 |
static void |
| 1077 |
mptscsih_search_running_cmds(MPT_SCSI_HOST *hd, VirtDevice *vdevice) |
| 1078 |
{ |
| 1079 |
SCSIIORequest_t *mf = NULL; |
| 1080 |
int ii; |
| 1081 |
struct scsi_cmnd *sc; |
| 1082 |
struct scsi_lun lun; |
| 1083 |
MPT_ADAPTER *ioc = hd->ioc; |
| 1084 |
unsigned long flags; |
| 1085 |
|
| 1086 |
spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); |
| 1087 |
for (ii = 0; ii < ioc->req_depth; ii++) { |
| 1088 |
if ((sc = ioc->ScsiLookup[ii]) != NULL) { |
| 1089 |
|
| 1090 |
mf = (SCSIIORequest_t *)MPT_INDEX_2_MFPTR(ioc, ii); |
| 1091 |
if (mf == NULL) |
| 1092 |
continue; |
| 1093 |
/* If the device is a hidden raid component, then its |
| 1094 |
* expected that the mf->function will be RAID_SCSI_IO |
| 1095 |
*/ |
| 1096 |
if (vdevice->vtarget->tflags & |
| 1097 |
MPT_TARGET_FLAGS_RAID_COMPONENT && mf->Function != |
| 1098 |
MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH) |
| 1099 |
continue; |
| 1100 |
|
| 1101 |
int_to_scsilun(vdevice->lun, &lun); |
| 1102 |
if ((mf->Bus != vdevice->vtarget->channel) || |
| 1103 |
(mf->TargetID != vdevice->vtarget->id) || |
| 1104 |
memcmp(lun.scsi_lun, mf->LUN, 8)) |
| 1105 |
continue; |
| 1106 |
|
| 1107 |
if ((unsigned char *)mf != sc->host_scribble) |
| 1108 |
continue; |
| 1109 |
ioc->ScsiLookup[ii] = NULL; |
| 1110 |
spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); |
| 1111 |
mptscsih_freeChainBuffers(ioc, ii); |
| 1112 |
mpt_free_msg_frame(ioc, (MPT_FRAME_HDR *)mf); |
| 1113 |
scsi_dma_unmap(sc); |
| 1114 |
sc->host_scribble = NULL; |
| 1115 |
sc->result = DID_NO_CONNECT << 16; |
| 1116 |
dtmprintk(ioc, sdev_printk(KERN_INFO, sc->device, |
| 1117 |
MYIOC_s_FMT "completing cmds: fw_channel %d, " |
| 1118 |
"fw_id %d, sc=%p, mf = %p, idx=%x\n", ioc->name, |
| 1119 |
vdevice->vtarget->channel, vdevice->vtarget->id, |
| 1120 |
sc, mf, ii)); |
| 1121 |
scsi_done(sc); |
| 1122 |
spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); |
| 1123 |
} |
| 1124 |
} |
| 1125 |
spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); |
| 1126 |
return; |
| 1127 |
} |
| 1128 |
|
| 1129 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 1130 |
|
| 1131 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 1132 |
/* |
| 1133 |
* mptscsih_report_queue_full - Report QUEUE_FULL status returned |
| 1134 |
* from a SCSI target device. |
| 1135 |
* @sc: Pointer to scsi_cmnd structure |
| 1136 |
* @pScsiReply: Pointer to SCSIIOReply_t |
| 1137 |
* @pScsiReq: Pointer to original SCSI request |
| 1138 |
* |
| 1139 |
* This routine periodically reports QUEUE_FULL status returned from a |
| 1140 |
* SCSI target device. It reports this to the console via kernel |
| 1141 |
* printk() API call, not more than once every 10 seconds. |
| 1142 |
*/ |
| 1143 |
static void |
| 1144 |
mptscsih_report_queue_full(struct scsi_cmnd *sc, SCSIIOReply_t *pScsiReply, SCSIIORequest_t *pScsiReq) |
| 1145 |
{ |
| 1146 |
long time = jiffies; |
| 1147 |
MPT_SCSI_HOST *hd; |
| 1148 |
MPT_ADAPTER *ioc; |
| 1149 |
|
| 1150 |
if (sc->device == NULL) |
| 1151 |
return; |
| 1152 |
if (sc->device->host == NULL) |
| 1153 |
return; |
| 1154 |
if ((hd = shost_priv(sc->device->host)) == NULL) |
| 1155 |
return; |
| 1156 |
ioc = hd->ioc; |
| 1157 |
if (time - hd->last_queue_full > 10 * HZ) { |
| 1158 |
dprintk(ioc, printk(MYIOC_s_WARN_FMT "Device (%d:%d:%llu) reported QUEUE_FULL!\n", |
| 1159 |
ioc->name, 0, sc->device->id, sc->device->lun)); |
| 1160 |
hd->last_queue_full = time; |
| 1161 |
} |
| 1162 |
} |
| 1163 |
|
| 1164 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 1165 |
/* |
| 1166 |
* mptscsih_remove - Removed scsi devices |
| 1167 |
* @pdev: Pointer to pci_dev structure |
| 1168 |
* |
| 1169 |
* |
| 1170 |
*/ |
| 1171 |
void |
| 1172 |
mptscsih_remove(struct pci_dev *pdev) |
| 1173 |
{ |
| 1174 |
MPT_ADAPTER *ioc = pci_get_drvdata(pdev); |
| 1175 |
struct Scsi_Host *host = ioc->sh; |
| 1176 |
MPT_SCSI_HOST *hd; |
| 1177 |
int sz1; |
| 1178 |
|
| 1179 |
if (host == NULL) |
| 1180 |
hd = NULL; |
| 1181 |
else |
| 1182 |
hd = shost_priv(host); |
| 1183 |
|
| 1184 |
mptscsih_shutdown(pdev); |
| 1185 |
|
| 1186 |
sz1=0; |
| 1187 |
|
| 1188 |
if (ioc->ScsiLookup != NULL) { |
| 1189 |
sz1 = ioc->req_depth * sizeof(void *); |
| 1190 |
kfree(ioc->ScsiLookup); |
| 1191 |
ioc->ScsiLookup = NULL; |
| 1192 |
} |
| 1193 |
|
| 1194 |
dprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 1195 |
"Free'd ScsiLookup (%d) memory\n", |
| 1196 |
ioc->name, sz1)); |
| 1197 |
|
| 1198 |
if (hd) |
| 1199 |
kfree(hd->info_kbuf); |
| 1200 |
|
| 1201 |
/* NULL the Scsi_Host pointer |
| 1202 |
*/ |
| 1203 |
ioc->sh = NULL; |
| 1204 |
|
| 1205 |
if (host) |
| 1206 |
scsi_host_put(host); |
| 1207 |
mpt_detach(pdev); |
| 1208 |
|
| 1209 |
} |
| 1210 |
|
| 1211 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 1212 |
/* |
| 1213 |
* mptscsih_shutdown - reboot notifier |
| 1214 |
* |
| 1215 |
*/ |
| 1216 |
void |
| 1217 |
mptscsih_shutdown(struct pci_dev *pdev) |
| 1218 |
{ |
| 1219 |
} |
| 1220 |
|
| 1221 |
#ifdef CONFIG_PM |
| 1222 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 1223 |
/* |
| 1224 |
* mptscsih_suspend - Fusion MPT scsi driver suspend routine. |
| 1225 |
* |
| 1226 |
* |
| 1227 |
*/ |
| 1228 |
int |
| 1229 |
mptscsih_suspend(struct pci_dev *pdev, pm_message_t state) |
| 1230 |
{ |
| 1231 |
MPT_ADAPTER *ioc = pci_get_drvdata(pdev); |
| 1232 |
|
| 1233 |
scsi_block_requests(ioc->sh); |
| 1234 |
mptscsih_shutdown(pdev); |
| 1235 |
return mpt_suspend(pdev,state); |
| 1236 |
} |
| 1237 |
|
| 1238 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 1239 |
/* |
| 1240 |
* mptscsih_resume - Fusion MPT scsi driver resume routine. |
| 1241 |
* |
| 1242 |
* |
| 1243 |
*/ |
| 1244 |
int |
| 1245 |
mptscsih_resume(struct pci_dev *pdev) |
| 1246 |
{ |
| 1247 |
MPT_ADAPTER *ioc = pci_get_drvdata(pdev); |
| 1248 |
int rc; |
| 1249 |
|
| 1250 |
rc = mpt_resume(pdev); |
| 1251 |
scsi_unblock_requests(ioc->sh); |
| 1252 |
return rc; |
| 1253 |
} |
| 1254 |
|
| 1255 |
#endif |
| 1256 |
|
| 1257 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 1258 |
/** |
| 1259 |
* mptscsih_info - Return information about MPT adapter |
| 1260 |
* @SChost: Pointer to Scsi_Host structure |
| 1261 |
* |
| 1262 |
* (linux scsi_host_template.info routine) |
| 1263 |
* |
| 1264 |
* Returns pointer to buffer where information was written. |
| 1265 |
*/ |
| 1266 |
const char * |
| 1267 |
mptscsih_info(struct Scsi_Host *SChost) |
| 1268 |
{ |
| 1269 |
MPT_SCSI_HOST *h; |
| 1270 |
int size = 0; |
| 1271 |
|
| 1272 |
h = shost_priv(SChost); |
| 1273 |
|
| 1274 |
if (h->info_kbuf == NULL) |
| 1275 |
if ((h->info_kbuf = kmalloc(0x1000 /* 4Kb */, GFP_KERNEL)) == NULL) |
| 1276 |
return h->info_kbuf; |
| 1277 |
h->info_kbuf[0] = '\0'; |
| 1278 |
|
| 1279 |
mpt_print_ioc_summary(h->ioc, h->info_kbuf, &size, 0, 0); |
| 1280 |
h->info_kbuf[size-1] = '\0'; |
| 1281 |
|
| 1282 |
return h->info_kbuf; |
| 1283 |
} |
| 1284 |
|
| 1285 |
int mptscsih_show_info(struct seq_file *m, struct Scsi_Host *host) |
| 1286 |
{ |
| 1287 |
MPT_SCSI_HOST *hd = shost_priv(host); |
| 1288 |
MPT_ADAPTER *ioc = hd->ioc; |
| 1289 |
|
| 1290 |
seq_printf(m, "%s: %s, ", ioc->name, ioc->prod_name); |
| 1291 |
seq_printf(m, "%s%08xh, ", MPT_FW_REV_MAGIC_ID_STRING, ioc->facts.FWVersion.Word); |
| 1292 |
seq_printf(m, "Ports=%d, ", ioc->facts.NumberOfPorts); |
| 1293 |
seq_printf(m, "MaxQ=%d\n", ioc->req_depth); |
| 1294 |
|
| 1295 |
return 0; |
| 1296 |
} |
| 1297 |
|
| 1298 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 1299 |
#define ADD_INDEX_LOG(req_ent) do { } while(0) |
| 1300 |
|
| 1301 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 1302 |
/** |
| 1303 |
* mptscsih_qcmd - Primary Fusion MPT SCSI initiator IO start routine. |
| 1304 |
* @SCpnt: Pointer to scsi_cmnd structure |
| 1305 |
* |
| 1306 |
* (linux scsi_host_template.queuecommand routine) |
| 1307 |
* This is the primary SCSI IO start routine. Create a MPI SCSIIORequest |
| 1308 |
* from a linux scsi_cmnd request and send it to the IOC. |
| 1309 |
* |
| 1310 |
* Returns 0. (rtn value discarded by linux scsi mid-layer) |
| 1311 |
*/ |
| 1312 |
enum scsi_qc_status mptscsih_qcmd(struct scsi_cmnd *SCpnt) |
| 1313 |
{ |
| 1314 |
MPT_SCSI_HOST *hd; |
| 1315 |
MPT_FRAME_HDR *mf; |
| 1316 |
SCSIIORequest_t *pScsiReq; |
| 1317 |
VirtDevice *vdevice = SCpnt->device->hostdata; |
| 1318 |
u32 datalen; |
| 1319 |
u32 scsictl; |
| 1320 |
u32 scsidir; |
| 1321 |
u32 cmd_len; |
| 1322 |
int my_idx; |
| 1323 |
int ii; |
| 1324 |
MPT_ADAPTER *ioc; |
| 1325 |
|
| 1326 |
hd = shost_priv(SCpnt->device->host); |
| 1327 |
ioc = hd->ioc; |
| 1328 |
|
| 1329 |
dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "qcmd: SCpnt=%p\n", |
| 1330 |
ioc->name, SCpnt)); |
| 1331 |
|
| 1332 |
if (ioc->taskmgmt_quiesce_io) |
| 1333 |
return SCSI_MLQUEUE_HOST_BUSY; |
| 1334 |
|
| 1335 |
/* |
| 1336 |
* Put together a MPT SCSI request... |
| 1337 |
*/ |
| 1338 |
if ((mf = mpt_get_msg_frame(ioc->DoneCtx, ioc)) == NULL) { |
| 1339 |
dprintk(ioc, printk(MYIOC_s_WARN_FMT "QueueCmd, no msg frames!!\n", |
| 1340 |
ioc->name)); |
| 1341 |
return SCSI_MLQUEUE_HOST_BUSY; |
| 1342 |
} |
| 1343 |
|
| 1344 |
pScsiReq = (SCSIIORequest_t *) mf; |
| 1345 |
|
| 1346 |
my_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx); |
| 1347 |
|
| 1348 |
ADD_INDEX_LOG(my_idx); |
| 1349 |
|
| 1350 |
/* TUR's being issued with scsictl=0x02000000 (DATA_IN)! |
| 1351 |
* Seems we may receive a buffer (datalen>0) even when there |
| 1352 |
* will be no data transfer! GRRRRR... |
| 1353 |
*/ |
| 1354 |
if (SCpnt->sc_data_direction == DMA_FROM_DEVICE) { |
| 1355 |
datalen = scsi_bufflen(SCpnt); |
| 1356 |
scsidir = MPI_SCSIIO_CONTROL_READ; /* DATA IN (host<--ioc<--dev) */ |
| 1357 |
} else if (SCpnt->sc_data_direction == DMA_TO_DEVICE) { |
| 1358 |
datalen = scsi_bufflen(SCpnt); |
| 1359 |
scsidir = MPI_SCSIIO_CONTROL_WRITE; /* DATA OUT (host-->ioc-->dev) */ |
| 1360 |
} else { |
| 1361 |
datalen = 0; |
| 1362 |
scsidir = MPI_SCSIIO_CONTROL_NODATATRANSFER; |
| 1363 |
} |
| 1364 |
|
| 1365 |
/* Default to untagged. Once a target structure has been allocated, |
| 1366 |
* use the Inquiry data to determine if device supports tagged. |
| 1367 |
*/ |
| 1368 |
if ((vdevice->vtarget->tflags & MPT_TARGET_FLAGS_Q_YES) && |
| 1369 |
SCpnt->device->tagged_supported) |
| 1370 |
scsictl = scsidir | MPI_SCSIIO_CONTROL_SIMPLEQ; |
| 1371 |
else |
| 1372 |
scsictl = scsidir | MPI_SCSIIO_CONTROL_UNTAGGED; |
| 1373 |
|
| 1374 |
|
| 1375 |
/* Use the above information to set up the message frame |
| 1376 |
*/ |
| 1377 |
pScsiReq->TargetID = (u8) vdevice->vtarget->id; |
| 1378 |
pScsiReq->Bus = vdevice->vtarget->channel; |
| 1379 |
pScsiReq->ChainOffset = 0; |
| 1380 |
if (vdevice->vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT) |
| 1381 |
pScsiReq->Function = MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH; |
| 1382 |
else |
| 1383 |
pScsiReq->Function = MPI_FUNCTION_SCSI_IO_REQUEST; |
| 1384 |
pScsiReq->CDBLength = SCpnt->cmd_len; |
| 1385 |
pScsiReq->SenseBufferLength = MPT_SENSE_BUFFER_SIZE; |
| 1386 |
pScsiReq->Reserved = 0; |
| 1387 |
pScsiReq->MsgFlags = mpt_msg_flags(ioc); |
| 1388 |
int_to_scsilun(SCpnt->device->lun, (struct scsi_lun *)pScsiReq->LUN); |
| 1389 |
pScsiReq->Control = cpu_to_le32(scsictl); |
| 1390 |
|
| 1391 |
/* |
| 1392 |
* Write SCSI CDB into the message |
| 1393 |
*/ |
| 1394 |
cmd_len = SCpnt->cmd_len; |
| 1395 |
for (ii=0; ii < cmd_len; ii++) |
| 1396 |
pScsiReq->CDB[ii] = SCpnt->cmnd[ii]; |
| 1397 |
|
| 1398 |
for (ii=cmd_len; ii < 16; ii++) |
| 1399 |
pScsiReq->CDB[ii] = 0; |
| 1400 |
|
| 1401 |
/* DataLength */ |
| 1402 |
pScsiReq->DataLength = cpu_to_le32(datalen); |
| 1403 |
|
| 1404 |
/* SenseBuffer low address */ |
| 1405 |
pScsiReq->SenseBufferLowAddr = cpu_to_le32(ioc->sense_buf_low_dma |
| 1406 |
+ (my_idx * MPT_SENSE_BUFFER_ALLOC)); |
| 1407 |
|
| 1408 |
/* Now add the SG list |
| 1409 |
* Always have a SGE even if null length. |
| 1410 |
*/ |
| 1411 |
if (datalen == 0) { |
| 1412 |
/* Add a NULL SGE */ |
| 1413 |
ioc->add_sge((char *)&pScsiReq->SGL, |
| 1414 |
MPT_SGE_FLAGS_SSIMPLE_READ | 0, |
| 1415 |
(dma_addr_t) -1); |
| 1416 |
} else { |
| 1417 |
/* Add a 32 or 64 bit SGE */ |
| 1418 |
if (mptscsih_AddSGE(ioc, SCpnt, pScsiReq, my_idx) != SUCCESS) |
| 1419 |
goto fail; |
| 1420 |
} |
| 1421 |
|
| 1422 |
SCpnt->host_scribble = (unsigned char *)mf; |
| 1423 |
mptscsih_set_scsi_lookup(ioc, my_idx, SCpnt); |
| 1424 |
|
| 1425 |
mpt_put_msg_frame(ioc->DoneCtx, ioc, mf); |
| 1426 |
dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Issued SCSI cmd (%p) mf=%p idx=%d\n", |
| 1427 |
ioc->name, SCpnt, mf, my_idx)); |
| 1428 |
DBG_DUMP_REQUEST_FRAME(ioc, (u32 *)mf); |
| 1429 |
return 0; |
| 1430 |
|
| 1431 |
fail: |
| 1432 |
mptscsih_freeChainBuffers(ioc, my_idx); |
| 1433 |
mpt_free_msg_frame(ioc, mf); |
| 1434 |
return SCSI_MLQUEUE_HOST_BUSY; |
| 1435 |
} |
| 1436 |
|
| 1437 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 1438 |
/* |
| 1439 |
* mptscsih_freeChainBuffers - Function to free chain buffers associated |
| 1440 |
* with a SCSI IO request |
| 1441 |
* @hd: Pointer to the MPT_SCSI_HOST instance |
| 1442 |
* @req_idx: Index of the SCSI IO request frame. |
| 1443 |
* |
| 1444 |
* Called if SG chain buffer allocation fails and mptscsih callbacks. |
| 1445 |
* No return. |
| 1446 |
*/ |
| 1447 |
static void |
| 1448 |
mptscsih_freeChainBuffers(MPT_ADAPTER *ioc, int req_idx) |
| 1449 |
{ |
| 1450 |
MPT_FRAME_HDR *chain; |
| 1451 |
unsigned long flags; |
| 1452 |
int chain_idx; |
| 1453 |
int next; |
| 1454 |
|
| 1455 |
/* Get the first chain index and reset |
| 1456 |
* tracker state. |
| 1457 |
*/ |
| 1458 |
chain_idx = ioc->ReqToChain[req_idx]; |
| 1459 |
ioc->ReqToChain[req_idx] = MPT_HOST_NO_CHAIN; |
| 1460 |
|
| 1461 |
while (chain_idx != MPT_HOST_NO_CHAIN) { |
| 1462 |
|
| 1463 |
/* Save the next chain buffer index */ |
| 1464 |
next = ioc->ChainToChain[chain_idx]; |
| 1465 |
|
| 1466 |
/* Free this chain buffer and reset |
| 1467 |
* tracker |
| 1468 |
*/ |
| 1469 |
ioc->ChainToChain[chain_idx] = MPT_HOST_NO_CHAIN; |
| 1470 |
|
| 1471 |
chain = (MPT_FRAME_HDR *) (ioc->ChainBuffer |
| 1472 |
+ (chain_idx * ioc->req_sz)); |
| 1473 |
|
| 1474 |
spin_lock_irqsave(&ioc->FreeQlock, flags); |
| 1475 |
list_add_tail(&chain->u.frame.linkage.list, &ioc->FreeChainQ); |
| 1476 |
spin_unlock_irqrestore(&ioc->FreeQlock, flags); |
| 1477 |
|
| 1478 |
dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FreeChainBuffers (index %d)\n", |
| 1479 |
ioc->name, chain_idx)); |
| 1480 |
|
| 1481 |
/* handle next */ |
| 1482 |
chain_idx = next; |
| 1483 |
} |
| 1484 |
return; |
| 1485 |
} |
| 1486 |
|
| 1487 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 1488 |
/* |
| 1489 |
* Reset Handling |
| 1490 |
*/ |
| 1491 |
|
| 1492 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 1493 |
/** |
| 1494 |
* mptscsih_IssueTaskMgmt - Generic send Task Management function. |
| 1495 |
* @hd: Pointer to MPT_SCSI_HOST structure |
| 1496 |
* @type: Task Management type |
| 1497 |
* @channel: channel number for task management |
| 1498 |
* @id: Logical Target ID for reset (if appropriate) |
| 1499 |
* @lun: Logical Unit for reset (if appropriate) |
| 1500 |
* @ctx2abort: Context for the task to be aborted (if appropriate) |
| 1501 |
* @timeout: timeout for task management control |
| 1502 |
* |
| 1503 |
* Remark: _HardResetHandler can be invoked from an interrupt thread (timer) |
| 1504 |
* or a non-interrupt thread. In the former, must not call schedule(). |
| 1505 |
* |
| 1506 |
* Not all fields are meaningfull for all task types. |
| 1507 |
* |
| 1508 |
* Returns 0 for SUCCESS, or FAILED. |
| 1509 |
* |
| 1510 |
**/ |
| 1511 |
int |
| 1512 |
mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, u64 lun, |
| 1513 |
int ctx2abort, ulong timeout) |
| 1514 |
{ |
| 1515 |
MPT_FRAME_HDR *mf; |
| 1516 |
SCSITaskMgmt_t *pScsiTm; |
| 1517 |
int ii; |
| 1518 |
int retval; |
| 1519 |
MPT_ADAPTER *ioc = hd->ioc; |
| 1520 |
u8 issue_hard_reset; |
| 1521 |
u32 ioc_raw_state; |
| 1522 |
unsigned long time_count; |
| 1523 |
|
| 1524 |
issue_hard_reset = 0; |
| 1525 |
ioc_raw_state = mpt_GetIocState(ioc, 0); |
| 1526 |
|
| 1527 |
if ((ioc_raw_state & MPI_IOC_STATE_MASK) != MPI_IOC_STATE_OPERATIONAL) { |
| 1528 |
printk(MYIOC_s_WARN_FMT |
| 1529 |
"TaskMgmt type=%x: IOC Not operational (0x%x)!\n", |
| 1530 |
ioc->name, type, ioc_raw_state); |
| 1531 |
printk(MYIOC_s_WARN_FMT "Issuing HardReset from %s!!\n", |
| 1532 |
ioc->name, __func__); |
| 1533 |
if (mpt_HardResetHandler(ioc, CAN_SLEEP) < 0) |
| 1534 |
printk(MYIOC_s_WARN_FMT "TaskMgmt HardReset " |
| 1535 |
"FAILED!!\n", ioc->name); |
| 1536 |
return 0; |
| 1537 |
} |
| 1538 |
|
| 1539 |
/* DOORBELL ACTIVE check is not required if |
| 1540 |
* MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q is supported. |
| 1541 |
*/ |
| 1542 |
|
| 1543 |
if (!((ioc->facts.IOCCapabilities & MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q) |
| 1544 |
&& (ioc->facts.MsgVersion >= MPI_VERSION_01_05)) && |
| 1545 |
(ioc_raw_state & MPI_DOORBELL_ACTIVE)) { |
| 1546 |
printk(MYIOC_s_WARN_FMT |
| 1547 |
"TaskMgmt type=%x: ioc_state: " |
| 1548 |
"DOORBELL_ACTIVE (0x%x)!\n", |
| 1549 |
ioc->name, type, ioc_raw_state); |
| 1550 |
return FAILED; |
| 1551 |
} |
| 1552 |
|
| 1553 |
mutex_lock(&ioc->taskmgmt_cmds.mutex); |
| 1554 |
if (mpt_set_taskmgmt_in_progress_flag(ioc) != 0) { |
| 1555 |
mf = NULL; |
| 1556 |
retval = FAILED; |
| 1557 |
goto out; |
| 1558 |
} |
| 1559 |
|
| 1560 |
/* Return Fail to calling function if no message frames available. |
| 1561 |
*/ |
| 1562 |
if ((mf = mpt_get_msg_frame(ioc->TaskCtx, ioc)) == NULL) { |
| 1563 |
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT |
| 1564 |
"TaskMgmt no msg frames!!\n", ioc->name)); |
| 1565 |
retval = FAILED; |
| 1566 |
mpt_clear_taskmgmt_in_progress_flag(ioc); |
| 1567 |
goto out; |
| 1568 |
} |
| 1569 |
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt request (mf=%p)\n", |
| 1570 |
ioc->name, mf)); |
| 1571 |
|
| 1572 |
/* Format the Request |
| 1573 |
*/ |
| 1574 |
pScsiTm = (SCSITaskMgmt_t *) mf; |
| 1575 |
pScsiTm->TargetID = id; |
| 1576 |
pScsiTm->Bus = channel; |
| 1577 |
pScsiTm->ChainOffset = 0; |
| 1578 |
pScsiTm->Function = MPI_FUNCTION_SCSI_TASK_MGMT; |
| 1579 |
|
| 1580 |
pScsiTm->Reserved = 0; |
| 1581 |
pScsiTm->TaskType = type; |
| 1582 |
pScsiTm->Reserved1 = 0; |
| 1583 |
pScsiTm->MsgFlags = (type == MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS) |
| 1584 |
? MPI_SCSITASKMGMT_MSGFLAGS_LIPRESET_RESET_OPTION : 0; |
| 1585 |
|
| 1586 |
int_to_scsilun(lun, (struct scsi_lun *)pScsiTm->LUN); |
| 1587 |
|
| 1588 |
for (ii=0; ii < 7; ii++) |
| 1589 |
pScsiTm->Reserved2[ii] = 0; |
| 1590 |
|
| 1591 |
pScsiTm->TaskMsgContext = ctx2abort; |
| 1592 |
|
| 1593 |
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt: ctx2abort (0x%08x) " |
| 1594 |
"task_type = 0x%02X, timeout = %ld\n", ioc->name, ctx2abort, |
| 1595 |
type, timeout)); |
| 1596 |
|
| 1597 |
DBG_DUMP_TM_REQUEST_FRAME(ioc, (u32 *)pScsiTm); |
| 1598 |
|
| 1599 |
INITIALIZE_MGMT_STATUS(ioc->taskmgmt_cmds.status) |
| 1600 |
time_count = jiffies; |
| 1601 |
if ((ioc->facts.IOCCapabilities & MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q) && |
| 1602 |
(ioc->facts.MsgVersion >= MPI_VERSION_01_05)) |
| 1603 |
mpt_put_msg_frame_hi_pri(ioc->TaskCtx, ioc, mf); |
| 1604 |
else { |
| 1605 |
retval = mpt_send_handshake_request(ioc->TaskCtx, ioc, |
| 1606 |
sizeof(SCSITaskMgmt_t), (u32*)pScsiTm, CAN_SLEEP); |
| 1607 |
if (retval) { |
| 1608 |
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT |
| 1609 |
"TaskMgmt handshake FAILED!(mf=%p, rc=%d) \n", |
| 1610 |
ioc->name, mf, retval)); |
| 1611 |
mpt_free_msg_frame(ioc, mf); |
| 1612 |
mpt_clear_taskmgmt_in_progress_flag(ioc); |
| 1613 |
goto out; |
| 1614 |
} |
| 1615 |
} |
| 1616 |
|
| 1617 |
wait_for_completion_timeout(&ioc->taskmgmt_cmds.done, |
| 1618 |
timeout*HZ); |
| 1619 |
if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) { |
| 1620 |
retval = FAILED; |
| 1621 |
dtmprintk(ioc, printk(MYIOC_s_ERR_FMT |
| 1622 |
"TaskMgmt TIMED OUT!(mf=%p)\n", ioc->name, mf)); |
| 1623 |
mpt_clear_taskmgmt_in_progress_flag(ioc); |
| 1624 |
if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) |
| 1625 |
goto out; |
| 1626 |
issue_hard_reset = 1; |
| 1627 |
goto out; |
| 1628 |
} |
| 1629 |
|
| 1630 |
retval = mptscsih_taskmgmt_reply(ioc, type, |
| 1631 |
(SCSITaskMgmtReply_t *) ioc->taskmgmt_cmds.reply); |
| 1632 |
|
| 1633 |
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 1634 |
"TaskMgmt completed (%d seconds)\n", |
| 1635 |
ioc->name, jiffies_to_msecs(jiffies - time_count)/1000)); |
| 1636 |
|
| 1637 |
out: |
| 1638 |
|
| 1639 |
CLEAR_MGMT_STATUS(ioc->taskmgmt_cmds.status) |
| 1640 |
if (issue_hard_reset) { |
| 1641 |
printk(MYIOC_s_WARN_FMT |
| 1642 |
"Issuing Reset from %s!! doorbell=0x%08x\n", |
| 1643 |
ioc->name, __func__, mpt_GetIocState(ioc, 0)); |
| 1644 |
retval = (ioc->bus_type == SAS) ? |
| 1645 |
mpt_HardResetHandler(ioc, CAN_SLEEP) : |
| 1646 |
mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP); |
| 1647 |
mpt_free_msg_frame(ioc, mf); |
| 1648 |
} |
| 1649 |
|
| 1650 |
retval = (retval == 0) ? 0 : FAILED; |
| 1651 |
mutex_unlock(&ioc->taskmgmt_cmds.mutex); |
| 1652 |
return retval; |
| 1653 |
} |
| 1654 |
EXPORT_SYMBOL(mptscsih_IssueTaskMgmt); |
| 1655 |
|
| 1656 |
static int |
| 1657 |
mptscsih_get_tm_timeout(MPT_ADAPTER *ioc) |
| 1658 |
{ |
| 1659 |
switch (ioc->bus_type) { |
| 1660 |
case FC: |
| 1661 |
return 40; |
| 1662 |
case SAS: |
| 1663 |
return 30; |
| 1664 |
case SPI: |
| 1665 |
default: |
| 1666 |
return 10; |
| 1667 |
} |
| 1668 |
} |
| 1669 |
|
| 1670 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 1671 |
/** |
| 1672 |
* mptscsih_abort - Abort linux scsi_cmnd routine, new_eh variant |
| 1673 |
* @SCpnt: Pointer to scsi_cmnd structure, IO to be aborted |
| 1674 |
* |
| 1675 |
* (linux scsi_host_template.eh_abort_handler routine) |
| 1676 |
* |
| 1677 |
* Returns SUCCESS or FAILED. |
| 1678 |
**/ |
| 1679 |
int |
| 1680 |
mptscsih_abort(struct scsi_cmnd * SCpnt) |
| 1681 |
{ |
| 1682 |
MPT_SCSI_HOST *hd; |
| 1683 |
MPT_FRAME_HDR *mf; |
| 1684 |
u32 ctx2abort; |
| 1685 |
int scpnt_idx; |
| 1686 |
int retval; |
| 1687 |
VirtDevice *vdevice; |
| 1688 |
MPT_ADAPTER *ioc; |
| 1689 |
|
| 1690 |
/* If we can't locate our host adapter structure, return FAILED status. |
| 1691 |
*/ |
| 1692 |
if ((hd = shost_priv(SCpnt->device->host)) == NULL) { |
| 1693 |
SCpnt->result = DID_RESET << 16; |
| 1694 |
scsi_done(SCpnt); |
| 1695 |
printk(KERN_ERR MYNAM ": task abort: " |
| 1696 |
"can't locate host! (sc=%p)\n", SCpnt); |
| 1697 |
return FAILED; |
| 1698 |
} |
| 1699 |
|
| 1700 |
ioc = hd->ioc; |
| 1701 |
printk(MYIOC_s_INFO_FMT "attempting task abort! (sc=%p)\n", |
| 1702 |
ioc->name, SCpnt); |
| 1703 |
scsi_print_command(SCpnt); |
| 1704 |
|
| 1705 |
vdevice = SCpnt->device->hostdata; |
| 1706 |
if (!vdevice || !vdevice->vtarget) { |
| 1707 |
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 1708 |
"task abort: device has been deleted (sc=%p)\n", |
| 1709 |
ioc->name, SCpnt)); |
| 1710 |
SCpnt->result = DID_NO_CONNECT << 16; |
| 1711 |
scsi_done(SCpnt); |
| 1712 |
retval = SUCCESS; |
| 1713 |
goto out; |
| 1714 |
} |
| 1715 |
|
| 1716 |
/* Task aborts are not supported for hidden raid components. |
| 1717 |
*/ |
| 1718 |
if (vdevice->vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT) { |
| 1719 |
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 1720 |
"task abort: hidden raid component (sc=%p)\n", |
| 1721 |
ioc->name, SCpnt)); |
| 1722 |
SCpnt->result = DID_RESET << 16; |
| 1723 |
retval = FAILED; |
| 1724 |
goto out; |
| 1725 |
} |
| 1726 |
|
| 1727 |
/* Task aborts are not supported for volumes. |
| 1728 |
*/ |
| 1729 |
if (vdevice->vtarget->raidVolume) { |
| 1730 |
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 1731 |
"task abort: raid volume (sc=%p)\n", |
| 1732 |
ioc->name, SCpnt)); |
| 1733 |
SCpnt->result = DID_RESET << 16; |
| 1734 |
retval = FAILED; |
| 1735 |
goto out; |
| 1736 |
} |
| 1737 |
|
| 1738 |
/* Find this command |
| 1739 |
*/ |
| 1740 |
if ((scpnt_idx = SCPNT_TO_LOOKUP_IDX(ioc, SCpnt)) < 0) { |
| 1741 |
/* Cmd not found in ScsiLookup. |
| 1742 |
* Do OS callback. |
| 1743 |
*/ |
| 1744 |
SCpnt->result = DID_RESET << 16; |
| 1745 |
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "task abort: " |
| 1746 |
"Command not in the active list! (sc=%p)\n", ioc->name, |
| 1747 |
SCpnt)); |
| 1748 |
retval = SUCCESS; |
| 1749 |
goto out; |
| 1750 |
} |
| 1751 |
|
| 1752 |
if (ioc->timeouts < -1) |
| 1753 |
ioc->timeouts++; |
| 1754 |
|
| 1755 |
if (mpt_fwfault_debug) |
| 1756 |
mpt_halt_firmware(ioc); |
| 1757 |
|
| 1758 |
/* Most important! Set TaskMsgContext to SCpnt's MsgContext! |
| 1759 |
* (the IO to be ABORT'd) |
| 1760 |
* |
| 1761 |
* NOTE: Since we do not byteswap MsgContext, we do not |
| 1762 |
* swap it here either. It is an opaque cookie to |
| 1763 |
* the controller, so it does not matter. -DaveM |
| 1764 |
*/ |
| 1765 |
mf = MPT_INDEX_2_MFPTR(ioc, scpnt_idx); |
| 1766 |
ctx2abort = mf->u.frame.hwhdr.msgctxu.MsgContext; |
| 1767 |
retval = mptscsih_IssueTaskMgmt(hd, |
| 1768 |
MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK, |
| 1769 |
vdevice->vtarget->channel, |
| 1770 |
vdevice->vtarget->id, vdevice->lun, |
| 1771 |
ctx2abort, mptscsih_get_tm_timeout(ioc)); |
| 1772 |
|
| 1773 |
if (SCPNT_TO_LOOKUP_IDX(ioc, SCpnt) == scpnt_idx) { |
| 1774 |
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 1775 |
"task abort: command still in active list! (sc=%p)\n", |
| 1776 |
ioc->name, SCpnt)); |
| 1777 |
retval = FAILED; |
| 1778 |
} else { |
| 1779 |
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 1780 |
"task abort: command cleared from active list! (sc=%p)\n", |
| 1781 |
ioc->name, SCpnt)); |
| 1782 |
retval = SUCCESS; |
| 1783 |
} |
| 1784 |
|
| 1785 |
out: |
| 1786 |
printk(MYIOC_s_INFO_FMT "task abort: %s (rv=%04x) (sc=%p)\n", |
| 1787 |
ioc->name, ((retval == SUCCESS) ? "SUCCESS" : "FAILED"), retval, |
| 1788 |
SCpnt); |
| 1789 |
|
| 1790 |
return retval; |
| 1791 |
} |
| 1792 |
|
| 1793 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 1794 |
/** |
| 1795 |
* mptscsih_dev_reset - Perform a SCSI LOGICAL_UNIT_RESET! |
| 1796 |
* @SCpnt: Pointer to scsi_cmnd structure, IO which reset is due to |
| 1797 |
* |
| 1798 |
* (linux scsi_host_template.eh_dev_reset_handler routine) |
| 1799 |
* |
| 1800 |
* Returns SUCCESS or FAILED. |
| 1801 |
**/ |
| 1802 |
int |
| 1803 |
mptscsih_dev_reset(struct scsi_cmnd * SCpnt) |
| 1804 |
{ |
| 1805 |
MPT_SCSI_HOST *hd; |
| 1806 |
int retval; |
| 1807 |
VirtDevice *vdevice; |
| 1808 |
MPT_ADAPTER *ioc; |
| 1809 |
|
| 1810 |
/* If we can't locate our host adapter structure, return FAILED status. |
| 1811 |
*/ |
| 1812 |
if ((hd = shost_priv(SCpnt->device->host)) == NULL){ |
| 1813 |
printk(KERN_ERR MYNAM ": lun reset: " |
| 1814 |
"Can't locate host! (sc=%p)\n", SCpnt); |
| 1815 |
return FAILED; |
| 1816 |
} |
| 1817 |
|
| 1818 |
ioc = hd->ioc; |
| 1819 |
printk(MYIOC_s_INFO_FMT "attempting lun reset! (sc=%p)\n", |
| 1820 |
ioc->name, SCpnt); |
| 1821 |
scsi_print_command(SCpnt); |
| 1822 |
|
| 1823 |
vdevice = SCpnt->device->hostdata; |
| 1824 |
if (!vdevice || !vdevice->vtarget) { |
| 1825 |
retval = 0; |
| 1826 |
goto out; |
| 1827 |
} |
| 1828 |
|
| 1829 |
retval = mptscsih_IssueTaskMgmt(hd, |
| 1830 |
MPI_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET, |
| 1831 |
vdevice->vtarget->channel, |
| 1832 |
vdevice->vtarget->id, vdevice->lun, 0, |
| 1833 |
mptscsih_get_tm_timeout(ioc)); |
| 1834 |
|
| 1835 |
out: |
| 1836 |
printk (MYIOC_s_INFO_FMT "lun reset: %s (sc=%p)\n", |
| 1837 |
ioc->name, ((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt); |
| 1838 |
|
| 1839 |
if (retval == 0) |
| 1840 |
return SUCCESS; |
| 1841 |
else |
| 1842 |
return FAILED; |
| 1843 |
} |
| 1844 |
|
| 1845 |
|
| 1846 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 1847 |
/** |
| 1848 |
* mptscsih_bus_reset - Perform a SCSI BUS_RESET! new_eh variant |
| 1849 |
* @SCpnt: Pointer to scsi_cmnd structure, IO which reset is due to |
| 1850 |
* |
| 1851 |
* (linux scsi_host_template.eh_bus_reset_handler routine) |
| 1852 |
* |
| 1853 |
* Returns SUCCESS or FAILED. |
| 1854 |
**/ |
| 1855 |
int |
| 1856 |
mptscsih_bus_reset(struct scsi_cmnd * SCpnt) |
| 1857 |
{ |
| 1858 |
MPT_SCSI_HOST *hd; |
| 1859 |
int retval; |
| 1860 |
VirtDevice *vdevice; |
| 1861 |
MPT_ADAPTER *ioc; |
| 1862 |
|
| 1863 |
/* If we can't locate our host adapter structure, return FAILED status. |
| 1864 |
*/ |
| 1865 |
if ((hd = shost_priv(SCpnt->device->host)) == NULL){ |
| 1866 |
printk(KERN_ERR MYNAM ": bus reset: " |
| 1867 |
"Can't locate host! (sc=%p)\n", SCpnt); |
| 1868 |
return FAILED; |
| 1869 |
} |
| 1870 |
|
| 1871 |
ioc = hd->ioc; |
| 1872 |
printk(MYIOC_s_INFO_FMT "attempting bus reset! (sc=%p)\n", |
| 1873 |
ioc->name, SCpnt); |
| 1874 |
scsi_print_command(SCpnt); |
| 1875 |
|
| 1876 |
if (ioc->timeouts < -1) |
| 1877 |
ioc->timeouts++; |
| 1878 |
|
| 1879 |
vdevice = SCpnt->device->hostdata; |
| 1880 |
if (!vdevice || !vdevice->vtarget) |
| 1881 |
return SUCCESS; |
| 1882 |
retval = mptscsih_IssueTaskMgmt(hd, |
| 1883 |
MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS, |
| 1884 |
vdevice->vtarget->channel, 0, 0, 0, |
| 1885 |
mptscsih_get_tm_timeout(ioc)); |
| 1886 |
|
| 1887 |
printk(MYIOC_s_INFO_FMT "bus reset: %s (sc=%p)\n", |
| 1888 |
ioc->name, ((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt); |
| 1889 |
|
| 1890 |
if (retval == 0) |
| 1891 |
return SUCCESS; |
| 1892 |
else |
| 1893 |
return FAILED; |
| 1894 |
} |
| 1895 |
|
| 1896 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 1897 |
/** |
| 1898 |
* mptscsih_host_reset - Perform a SCSI host adapter RESET (new_eh variant) |
| 1899 |
* @SCpnt: Pointer to scsi_cmnd structure, IO which reset is due to |
| 1900 |
* |
| 1901 |
* (linux scsi_host_template.eh_host_reset_handler routine) |
| 1902 |
* |
| 1903 |
* Returns SUCCESS or FAILED. |
| 1904 |
*/ |
| 1905 |
int |
| 1906 |
mptscsih_host_reset(struct scsi_cmnd *SCpnt) |
| 1907 |
{ |
| 1908 |
MPT_SCSI_HOST * hd; |
| 1909 |
int status = SUCCESS; |
| 1910 |
MPT_ADAPTER *ioc; |
| 1911 |
int retval; |
| 1912 |
|
| 1913 |
/* If we can't locate the host to reset, then we failed. */ |
| 1914 |
if ((hd = shost_priv(SCpnt->device->host)) == NULL){ |
| 1915 |
printk(KERN_ERR MYNAM ": host reset: " |
| 1916 |
"Can't locate host! (sc=%p)\n", SCpnt); |
| 1917 |
return FAILED; |
| 1918 |
} |
| 1919 |
|
| 1920 |
/* make sure we have no outstanding commands at this stage */ |
| 1921 |
mptscsih_flush_running_cmds(hd); |
| 1922 |
|
| 1923 |
ioc = hd->ioc; |
| 1924 |
printk(MYIOC_s_INFO_FMT "attempting host reset! (sc=%p)\n", |
| 1925 |
ioc->name, SCpnt); |
| 1926 |
|
| 1927 |
/* If our attempts to reset the host failed, then return a failed |
| 1928 |
* status. The host will be taken off line by the SCSI mid-layer. |
| 1929 |
*/ |
| 1930 |
retval = mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP); |
| 1931 |
if (retval < 0) |
| 1932 |
status = FAILED; |
| 1933 |
else |
| 1934 |
status = SUCCESS; |
| 1935 |
|
| 1936 |
printk(MYIOC_s_INFO_FMT "host reset: %s (sc=%p)\n", |
| 1937 |
ioc->name, ((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt); |
| 1938 |
|
| 1939 |
return status; |
| 1940 |
} |
| 1941 |
|
| 1942 |
static int |
| 1943 |
mptscsih_taskmgmt_reply(MPT_ADAPTER *ioc, u8 type, |
| 1944 |
SCSITaskMgmtReply_t *pScsiTmReply) |
| 1945 |
{ |
| 1946 |
u16 iocstatus; |
| 1947 |
u32 termination_count; |
| 1948 |
int retval; |
| 1949 |
|
| 1950 |
if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_RF_VALID)) { |
| 1951 |
retval = FAILED; |
| 1952 |
goto out; |
| 1953 |
} |
| 1954 |
|
| 1955 |
DBG_DUMP_TM_REPLY_FRAME(ioc, (u32 *)pScsiTmReply); |
| 1956 |
|
| 1957 |
iocstatus = le16_to_cpu(pScsiTmReply->IOCStatus) & MPI_IOCSTATUS_MASK; |
| 1958 |
termination_count = le32_to_cpu(pScsiTmReply->TerminationCount); |
| 1959 |
|
| 1960 |
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 1961 |
"TaskMgmt fw_channel = %d, fw_id = %d, task_type = 0x%02X,\n" |
| 1962 |
"\tiocstatus = 0x%04X, loginfo = 0x%08X, response_code = 0x%02X,\n" |
| 1963 |
"\tterm_cmnds = %d\n", ioc->name, pScsiTmReply->Bus, |
| 1964 |
pScsiTmReply->TargetID, type, le16_to_cpu(pScsiTmReply->IOCStatus), |
| 1965 |
le32_to_cpu(pScsiTmReply->IOCLogInfo), pScsiTmReply->ResponseCode, |
| 1966 |
termination_count)); |
| 1967 |
|
| 1968 |
if (ioc->facts.MsgVersion >= MPI_VERSION_01_05 && |
| 1969 |
pScsiTmReply->ResponseCode) |
| 1970 |
mptscsih_taskmgmt_response_code(ioc, |
| 1971 |
pScsiTmReply->ResponseCode); |
| 1972 |
|
| 1973 |
if (iocstatus == MPI_IOCSTATUS_SUCCESS) { |
| 1974 |
retval = 0; |
| 1975 |
goto out; |
| 1976 |
} |
| 1977 |
|
| 1978 |
retval = FAILED; |
| 1979 |
if (type == MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK) { |
| 1980 |
if (termination_count == 1) |
| 1981 |
retval = 0; |
| 1982 |
goto out; |
| 1983 |
} |
| 1984 |
|
| 1985 |
if (iocstatus == MPI_IOCSTATUS_SCSI_TASK_TERMINATED || |
| 1986 |
iocstatus == MPI_IOCSTATUS_SCSI_IOC_TERMINATED) |
| 1987 |
retval = 0; |
| 1988 |
|
| 1989 |
out: |
| 1990 |
return retval; |
| 1991 |
} |
| 1992 |
|
| 1993 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 1994 |
void |
| 1995 |
mptscsih_taskmgmt_response_code(MPT_ADAPTER *ioc, u8 response_code) |
| 1996 |
{ |
| 1997 |
char *desc; |
| 1998 |
|
| 1999 |
switch (response_code) { |
| 2000 |
case MPI_SCSITASKMGMT_RSP_TM_COMPLETE: |
| 2001 |
desc = "The task completed."; |
| 2002 |
break; |
| 2003 |
case MPI_SCSITASKMGMT_RSP_INVALID_FRAME: |
| 2004 |
desc = "The IOC received an invalid frame status."; |
| 2005 |
break; |
| 2006 |
case MPI_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED: |
| 2007 |
desc = "The task type is not supported."; |
| 2008 |
break; |
| 2009 |
case MPI_SCSITASKMGMT_RSP_TM_FAILED: |
| 2010 |
desc = "The requested task failed."; |
| 2011 |
break; |
| 2012 |
case MPI_SCSITASKMGMT_RSP_TM_SUCCEEDED: |
| 2013 |
desc = "The task completed successfully."; |
| 2014 |
break; |
| 2015 |
case MPI_SCSITASKMGMT_RSP_TM_INVALID_LUN: |
| 2016 |
desc = "The LUN request is invalid."; |
| 2017 |
break; |
| 2018 |
case MPI_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC: |
| 2019 |
desc = "The task is in the IOC queue and has not been sent to target."; |
| 2020 |
break; |
| 2021 |
default: |
| 2022 |
desc = "unknown"; |
| 2023 |
break; |
| 2024 |
} |
| 2025 |
printk(MYIOC_s_INFO_FMT "Response Code(0x%08x): F/W: %s\n", |
| 2026 |
ioc->name, response_code, desc); |
| 2027 |
} |
| 2028 |
EXPORT_SYMBOL(mptscsih_taskmgmt_response_code); |
| 2029 |
|
| 2030 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 2031 |
/** |
| 2032 |
* mptscsih_taskmgmt_complete - Registered with Fusion MPT base driver |
| 2033 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 2034 |
* @mf: Pointer to SCSI task mgmt request frame |
| 2035 |
* @mr: Pointer to SCSI task mgmt reply frame |
| 2036 |
* |
| 2037 |
* This routine is called from mptbase.c::mpt_interrupt() at the completion |
| 2038 |
* of any SCSI task management request. |
| 2039 |
* This routine is registered with the MPT (base) driver at driver |
| 2040 |
* load/init time via the mpt_register() API call. |
| 2041 |
* |
| 2042 |
* Returns 1 indicating alloc'd request frame ptr should be freed. |
| 2043 |
**/ |
| 2044 |
int |
| 2045 |
mptscsih_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, |
| 2046 |
MPT_FRAME_HDR *mr) |
| 2047 |
{ |
| 2048 |
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 2049 |
"TaskMgmt completed (mf=%p, mr=%p)\n", ioc->name, mf, mr)); |
| 2050 |
|
| 2051 |
ioc->taskmgmt_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD; |
| 2052 |
|
| 2053 |
if (!mr) |
| 2054 |
goto out; |
| 2055 |
|
| 2056 |
ioc->taskmgmt_cmds.status |= MPT_MGMT_STATUS_RF_VALID; |
| 2057 |
memcpy(ioc->taskmgmt_cmds.reply, mr, |
| 2058 |
min(MPT_DEFAULT_FRAME_SIZE, 4 * mr->u.reply.MsgLength)); |
| 2059 |
out: |
| 2060 |
if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_PENDING) { |
| 2061 |
mpt_clear_taskmgmt_in_progress_flag(ioc); |
| 2062 |
ioc->taskmgmt_cmds.status &= ~MPT_MGMT_STATUS_PENDING; |
| 2063 |
complete(&ioc->taskmgmt_cmds.done); |
| 2064 |
if (ioc->bus_type == SAS) |
| 2065 |
ioc->schedule_target_reset(ioc); |
| 2066 |
return 1; |
| 2067 |
} |
| 2068 |
return 0; |
| 2069 |
} |
| 2070 |
|
| 2071 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 2072 |
/* |
| 2073 |
* This is anyones guess quite frankly. |
| 2074 |
*/ |
| 2075 |
int |
| 2076 |
mptscsih_bios_param(struct scsi_device * sdev, struct gendisk *unused, |
| 2077 |
sector_t capacity, int geom[]) |
| 2078 |
{ |
| 2079 |
int heads; |
| 2080 |
int sectors; |
| 2081 |
sector_t cylinders; |
| 2082 |
ulong dummy; |
| 2083 |
|
| 2084 |
heads = 64; |
| 2085 |
sectors = 32; |
| 2086 |
|
| 2087 |
dummy = heads * sectors; |
| 2088 |
cylinders = capacity; |
| 2089 |
sector_div(cylinders,dummy); |
| 2090 |
|
| 2091 |
/* |
| 2092 |
* Handle extended translation size for logical drives |
| 2093 |
* > 1Gb |
| 2094 |
*/ |
| 2095 |
if ((ulong)capacity >= 0x200000) { |
| 2096 |
heads = 255; |
| 2097 |
sectors = 63; |
| 2098 |
dummy = heads * sectors; |
| 2099 |
cylinders = capacity; |
| 2100 |
sector_div(cylinders,dummy); |
| 2101 |
} |
| 2102 |
|
| 2103 |
/* return result */ |
| 2104 |
geom[0] = heads; |
| 2105 |
geom[1] = sectors; |
| 2106 |
geom[2] = cylinders; |
| 2107 |
|
| 2108 |
return 0; |
| 2109 |
} |
| 2110 |
|
| 2111 |
/* Search IOC page 3 to determine if this is hidden physical disk |
| 2112 |
* |
| 2113 |
*/ |
| 2114 |
int |
| 2115 |
mptscsih_is_phys_disk(MPT_ADAPTER *ioc, u8 channel, u8 id) |
| 2116 |
{ |
| 2117 |
struct inactive_raid_component_info *component_info; |
| 2118 |
int i, j; |
| 2119 |
RaidPhysDiskPage1_t *phys_disk; |
| 2120 |
int rc = 0; |
| 2121 |
int num_paths; |
| 2122 |
|
| 2123 |
if (!ioc->raid_data.pIocPg3) |
| 2124 |
goto out; |
| 2125 |
for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) { |
| 2126 |
if ((id == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskID) && |
| 2127 |
(channel == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskBus)) { |
| 2128 |
rc = 1; |
| 2129 |
goto out; |
| 2130 |
} |
| 2131 |
} |
| 2132 |
|
| 2133 |
if (ioc->bus_type != SAS) |
| 2134 |
goto out; |
| 2135 |
|
| 2136 |
/* |
| 2137 |
* Check if dual path |
| 2138 |
*/ |
| 2139 |
for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) { |
| 2140 |
num_paths = mpt_raid_phys_disk_get_num_paths(ioc, |
| 2141 |
ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum); |
| 2142 |
if (num_paths < 2) |
| 2143 |
continue; |
| 2144 |
phys_disk = kzalloc(offsetof(RaidPhysDiskPage1_t, Path) + |
| 2145 |
(num_paths * sizeof(RAID_PHYS_DISK1_PATH)), GFP_KERNEL); |
| 2146 |
if (!phys_disk) |
| 2147 |
continue; |
| 2148 |
if ((mpt_raid_phys_disk_pg1(ioc, |
| 2149 |
ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum, |
| 2150 |
phys_disk))) { |
| 2151 |
kfree(phys_disk); |
| 2152 |
continue; |
| 2153 |
} |
| 2154 |
for (j = 0; j < num_paths; j++) { |
| 2155 |
if ((phys_disk->Path[j].Flags & |
| 2156 |
MPI_RAID_PHYSDISK1_FLAG_INVALID)) |
| 2157 |
continue; |
| 2158 |
if ((phys_disk->Path[j].Flags & |
| 2159 |
MPI_RAID_PHYSDISK1_FLAG_BROKEN)) |
| 2160 |
continue; |
| 2161 |
if ((id == phys_disk->Path[j].PhysDiskID) && |
| 2162 |
(channel == phys_disk->Path[j].PhysDiskBus)) { |
| 2163 |
rc = 1; |
| 2164 |
kfree(phys_disk); |
| 2165 |
goto out; |
| 2166 |
} |
| 2167 |
} |
| 2168 |
kfree(phys_disk); |
| 2169 |
} |
| 2170 |
|
| 2171 |
|
| 2172 |
/* |
| 2173 |
* Check inactive list for matching phys disks |
| 2174 |
*/ |
| 2175 |
if (list_empty(&ioc->raid_data.inactive_list)) |
| 2176 |
goto out; |
| 2177 |
|
| 2178 |
mutex_lock(&ioc->raid_data.inactive_list_mutex); |
| 2179 |
list_for_each_entry(component_info, &ioc->raid_data.inactive_list, |
| 2180 |
list) { |
| 2181 |
if ((component_info->d.PhysDiskID == id) && |
| 2182 |
(component_info->d.PhysDiskBus == channel)) |
| 2183 |
rc = 1; |
| 2184 |
} |
| 2185 |
mutex_unlock(&ioc->raid_data.inactive_list_mutex); |
| 2186 |
|
| 2187 |
out: |
| 2188 |
return rc; |
| 2189 |
} |
| 2190 |
EXPORT_SYMBOL(mptscsih_is_phys_disk); |
| 2191 |
|
| 2192 |
u8 |
| 2193 |
mptscsih_raid_id_to_num(MPT_ADAPTER *ioc, u8 channel, u8 id) |
| 2194 |
{ |
| 2195 |
struct inactive_raid_component_info *component_info; |
| 2196 |
int i, j; |
| 2197 |
RaidPhysDiskPage1_t *phys_disk; |
| 2198 |
int rc = -ENXIO; |
| 2199 |
int num_paths; |
| 2200 |
|
| 2201 |
if (!ioc->raid_data.pIocPg3) |
| 2202 |
goto out; |
| 2203 |
for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) { |
| 2204 |
if ((id == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskID) && |
| 2205 |
(channel == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskBus)) { |
| 2206 |
rc = ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum; |
| 2207 |
goto out; |
| 2208 |
} |
| 2209 |
} |
| 2210 |
|
| 2211 |
if (ioc->bus_type != SAS) |
| 2212 |
goto out; |
| 2213 |
|
| 2214 |
/* |
| 2215 |
* Check if dual path |
| 2216 |
*/ |
| 2217 |
for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) { |
| 2218 |
num_paths = mpt_raid_phys_disk_get_num_paths(ioc, |
| 2219 |
ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum); |
| 2220 |
if (num_paths < 2) |
| 2221 |
continue; |
| 2222 |
phys_disk = kzalloc(offsetof(RaidPhysDiskPage1_t, Path) + |
| 2223 |
(num_paths * sizeof(RAID_PHYS_DISK1_PATH)), GFP_KERNEL); |
| 2224 |
if (!phys_disk) |
| 2225 |
continue; |
| 2226 |
if ((mpt_raid_phys_disk_pg1(ioc, |
| 2227 |
ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum, |
| 2228 |
phys_disk))) { |
| 2229 |
kfree(phys_disk); |
| 2230 |
continue; |
| 2231 |
} |
| 2232 |
for (j = 0; j < num_paths; j++) { |
| 2233 |
if ((phys_disk->Path[j].Flags & |
| 2234 |
MPI_RAID_PHYSDISK1_FLAG_INVALID)) |
| 2235 |
continue; |
| 2236 |
if ((phys_disk->Path[j].Flags & |
| 2237 |
MPI_RAID_PHYSDISK1_FLAG_BROKEN)) |
| 2238 |
continue; |
| 2239 |
if ((id == phys_disk->Path[j].PhysDiskID) && |
| 2240 |
(channel == phys_disk->Path[j].PhysDiskBus)) { |
| 2241 |
rc = phys_disk->PhysDiskNum; |
| 2242 |
kfree(phys_disk); |
| 2243 |
goto out; |
| 2244 |
} |
| 2245 |
} |
| 2246 |
kfree(phys_disk); |
| 2247 |
} |
| 2248 |
|
| 2249 |
/* |
| 2250 |
* Check inactive list for matching phys disks |
| 2251 |
*/ |
| 2252 |
if (list_empty(&ioc->raid_data.inactive_list)) |
| 2253 |
goto out; |
| 2254 |
|
| 2255 |
mutex_lock(&ioc->raid_data.inactive_list_mutex); |
| 2256 |
list_for_each_entry(component_info, &ioc->raid_data.inactive_list, |
| 2257 |
list) { |
| 2258 |
if ((component_info->d.PhysDiskID == id) && |
| 2259 |
(component_info->d.PhysDiskBus == channel)) |
| 2260 |
rc = component_info->d.PhysDiskNum; |
| 2261 |
} |
| 2262 |
mutex_unlock(&ioc->raid_data.inactive_list_mutex); |
| 2263 |
|
| 2264 |
out: |
| 2265 |
return rc; |
| 2266 |
} |
| 2267 |
EXPORT_SYMBOL(mptscsih_raid_id_to_num); |
| 2268 |
|
| 2269 |
/* |
| 2270 |
* OS entry point to allow for host driver to free allocated memory |
| 2271 |
* Called if no device present or device being unloaded |
| 2272 |
*/ |
| 2273 |
void |
| 2274 |
mptscsih_sdev_destroy(struct scsi_device *sdev) |
| 2275 |
{ |
| 2276 |
struct Scsi_Host *host = sdev->host; |
| 2277 |
MPT_SCSI_HOST *hd = shost_priv(host); |
| 2278 |
VirtTarget *vtarget; |
| 2279 |
VirtDevice *vdevice; |
| 2280 |
struct scsi_target *starget; |
| 2281 |
|
| 2282 |
starget = scsi_target(sdev); |
| 2283 |
vtarget = starget->hostdata; |
| 2284 |
vdevice = sdev->hostdata; |
| 2285 |
if (!vdevice) |
| 2286 |
return; |
| 2287 |
|
| 2288 |
mptscsih_search_running_cmds(hd, vdevice); |
| 2289 |
vtarget->num_luns--; |
| 2290 |
mptscsih_synchronize_cache(hd, vdevice); |
| 2291 |
kfree(vdevice); |
| 2292 |
sdev->hostdata = NULL; |
| 2293 |
} |
| 2294 |
|
| 2295 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 2296 |
/* |
| 2297 |
* mptscsih_change_queue_depth - This function will set a devices queue depth |
| 2298 |
* @sdev: per scsi_device pointer |
| 2299 |
* @qdepth: requested queue depth |
| 2300 |
* |
| 2301 |
* Adding support for new 'change_queue_depth' api. |
| 2302 |
*/ |
| 2303 |
int |
| 2304 |
mptscsih_change_queue_depth(struct scsi_device *sdev, int qdepth) |
| 2305 |
{ |
| 2306 |
MPT_SCSI_HOST *hd = shost_priv(sdev->host); |
| 2307 |
VirtTarget *vtarget; |
| 2308 |
struct scsi_target *starget; |
| 2309 |
int max_depth; |
| 2310 |
MPT_ADAPTER *ioc = hd->ioc; |
| 2311 |
|
| 2312 |
starget = scsi_target(sdev); |
| 2313 |
vtarget = starget->hostdata; |
| 2314 |
|
| 2315 |
if (ioc->bus_type == SPI) { |
| 2316 |
if (!(vtarget->tflags & MPT_TARGET_FLAGS_Q_YES)) |
| 2317 |
max_depth = 1; |
| 2318 |
else if (sdev->type == TYPE_DISK && |
| 2319 |
vtarget->minSyncFactor <= MPT_ULTRA160) |
| 2320 |
max_depth = MPT_SCSI_CMD_PER_DEV_HIGH; |
| 2321 |
else |
| 2322 |
max_depth = MPT_SCSI_CMD_PER_DEV_LOW; |
| 2323 |
} else |
| 2324 |
max_depth = ioc->sh->can_queue; |
| 2325 |
|
| 2326 |
if (!sdev->tagged_supported) |
| 2327 |
max_depth = 1; |
| 2328 |
|
| 2329 |
if (qdepth > max_depth) |
| 2330 |
qdepth = max_depth; |
| 2331 |
|
| 2332 |
return scsi_change_queue_depth(sdev, qdepth); |
| 2333 |
} |
| 2334 |
|
| 2335 |
/* |
| 2336 |
* OS entry point to adjust the queue_depths on a per-device basis. |
| 2337 |
* Called once per device the bus scan. Use it to force the queue_depth |
| 2338 |
* member to 1 if a device does not support Q tags. |
| 2339 |
* Return non-zero if fails. |
| 2340 |
*/ |
| 2341 |
int |
| 2342 |
mptscsih_sdev_configure(struct scsi_device *sdev, struct queue_limits *lim) |
| 2343 |
{ |
| 2344 |
struct Scsi_Host *sh = sdev->host; |
| 2345 |
VirtTarget *vtarget; |
| 2346 |
VirtDevice *vdevice; |
| 2347 |
struct scsi_target *starget; |
| 2348 |
MPT_SCSI_HOST *hd = shost_priv(sh); |
| 2349 |
MPT_ADAPTER *ioc = hd->ioc; |
| 2350 |
|
| 2351 |
starget = scsi_target(sdev); |
| 2352 |
vtarget = starget->hostdata; |
| 2353 |
vdevice = sdev->hostdata; |
| 2354 |
|
| 2355 |
dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 2356 |
"device @ %p, channel=%d, id=%d, lun=%llu\n", |
| 2357 |
ioc->name, sdev, sdev->channel, sdev->id, sdev->lun)); |
| 2358 |
if (ioc->bus_type == SPI) |
| 2359 |
dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 2360 |
"sdtr %d wdtr %d ppr %d inq length=%d\n", |
| 2361 |
ioc->name, sdev->sdtr, sdev->wdtr, |
| 2362 |
sdev->ppr, sdev->inquiry_len)); |
| 2363 |
|
| 2364 |
vdevice->configured_lun = 1; |
| 2365 |
|
| 2366 |
dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 2367 |
"Queue depth=%d, tflags=%x\n", |
| 2368 |
ioc->name, sdev->queue_depth, vtarget->tflags)); |
| 2369 |
|
| 2370 |
if (ioc->bus_type == SPI) |
| 2371 |
dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 2372 |
"negoFlags=%x, maxOffset=%x, SyncFactor=%x\n", |
| 2373 |
ioc->name, vtarget->negoFlags, vtarget->maxOffset, |
| 2374 |
vtarget->minSyncFactor)); |
| 2375 |
|
| 2376 |
mptscsih_change_queue_depth(sdev, MPT_SCSI_CMD_PER_DEV_HIGH); |
| 2377 |
dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 2378 |
"tagged %d, simple %d\n", |
| 2379 |
ioc->name,sdev->tagged_supported, sdev->simple_tags)); |
| 2380 |
|
| 2381 |
return 0; |
| 2382 |
} |
| 2383 |
|
| 2384 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 2385 |
/* |
| 2386 |
* Private routines... |
| 2387 |
*/ |
| 2388 |
|
| 2389 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 2390 |
/* Utility function to copy sense data from the scsi_cmnd buffer |
| 2391 |
* to the FC and SCSI target structures. |
| 2392 |
* |
| 2393 |
*/ |
| 2394 |
static void |
| 2395 |
mptscsih_copy_sense_data(struct scsi_cmnd *sc, MPT_SCSI_HOST *hd, MPT_FRAME_HDR *mf, SCSIIOReply_t *pScsiReply) |
| 2396 |
{ |
| 2397 |
VirtDevice *vdevice; |
| 2398 |
SCSIIORequest_t *pReq; |
| 2399 |
u32 sense_count = le32_to_cpu(pScsiReply->SenseCount); |
| 2400 |
MPT_ADAPTER *ioc = hd->ioc; |
| 2401 |
|
| 2402 |
/* Get target structure |
| 2403 |
*/ |
| 2404 |
pReq = (SCSIIORequest_t *) mf; |
| 2405 |
vdevice = sc->device->hostdata; |
| 2406 |
|
| 2407 |
if (sense_count) { |
| 2408 |
u8 *sense_data; |
| 2409 |
int req_index; |
| 2410 |
|
| 2411 |
/* Copy the sense received into the scsi command block. */ |
| 2412 |
req_index = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx); |
| 2413 |
sense_data = ((u8 *)ioc->sense_buf_pool + (req_index * MPT_SENSE_BUFFER_ALLOC)); |
| 2414 |
memcpy(sc->sense_buffer, sense_data, MPT_SENSE_BUFFER_ALLOC); |
| 2415 |
|
| 2416 |
/* Log SMART data (asc = 0x5D, non-IM case only) if required. |
| 2417 |
*/ |
| 2418 |
if ((ioc->events) && (ioc->eventTypes & (1 << MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE))) { |
| 2419 |
if ((sense_data[12] == 0x5D) && (vdevice->vtarget->raidVolume == 0)) { |
| 2420 |
int idx; |
| 2421 |
|
| 2422 |
idx = ioc->eventContext % MPTCTL_EVENT_LOG_SIZE; |
| 2423 |
ioc->events[idx].event = MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE; |
| 2424 |
ioc->events[idx].eventContext = ioc->eventContext; |
| 2425 |
|
| 2426 |
ioc->events[idx].data[0] = (pReq->LUN[1] << 24) | |
| 2427 |
(MPI_EVENT_SCSI_DEV_STAT_RC_SMART_DATA << 16) | |
| 2428 |
(sc->device->channel << 8) | sc->device->id; |
| 2429 |
|
| 2430 |
ioc->events[idx].data[1] = (sense_data[13] << 8) | sense_data[12]; |
| 2431 |
|
| 2432 |
ioc->eventContext++; |
| 2433 |
if (ioc->pcidev->vendor == |
| 2434 |
PCI_VENDOR_ID_IBM) { |
| 2435 |
mptscsih_issue_sep_command(ioc, |
| 2436 |
vdevice->vtarget, MPI_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT); |
| 2437 |
vdevice->vtarget->tflags |= |
| 2438 |
MPT_TARGET_FLAGS_LED_ON; |
| 2439 |
} |
| 2440 |
} |
| 2441 |
} |
| 2442 |
} else { |
| 2443 |
dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Hmmm... SenseData len=0! (?)\n", |
| 2444 |
ioc->name)); |
| 2445 |
} |
| 2446 |
} |
| 2447 |
|
| 2448 |
/** |
| 2449 |
* mptscsih_get_scsi_lookup - retrieves scmd entry |
| 2450 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 2451 |
* @i: index into the array |
| 2452 |
* |
| 2453 |
* Returns the scsi_cmd pointer |
| 2454 |
*/ |
| 2455 |
struct scsi_cmnd * |
| 2456 |
mptscsih_get_scsi_lookup(MPT_ADAPTER *ioc, int i) |
| 2457 |
{ |
| 2458 |
unsigned long flags; |
| 2459 |
struct scsi_cmnd *scmd; |
| 2460 |
|
| 2461 |
spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); |
| 2462 |
scmd = ioc->ScsiLookup[i]; |
| 2463 |
spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); |
| 2464 |
|
| 2465 |
return scmd; |
| 2466 |
} |
| 2467 |
EXPORT_SYMBOL(mptscsih_get_scsi_lookup); |
| 2468 |
|
| 2469 |
/** |
| 2470 |
* mptscsih_getclear_scsi_lookup - retrieves and clears scmd entry from ScsiLookup[] array list |
| 2471 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 2472 |
* @i: index into the array |
| 2473 |
* |
| 2474 |
* Returns the scsi_cmd pointer |
| 2475 |
* |
| 2476 |
**/ |
| 2477 |
static struct scsi_cmnd * |
| 2478 |
mptscsih_getclear_scsi_lookup(MPT_ADAPTER *ioc, int i) |
| 2479 |
{ |
| 2480 |
unsigned long flags; |
| 2481 |
struct scsi_cmnd *scmd; |
| 2482 |
|
| 2483 |
spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); |
| 2484 |
scmd = ioc->ScsiLookup[i]; |
| 2485 |
ioc->ScsiLookup[i] = NULL; |
| 2486 |
spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); |
| 2487 |
|
| 2488 |
return scmd; |
| 2489 |
} |
| 2490 |
|
| 2491 |
/** |
| 2492 |
* mptscsih_set_scsi_lookup - write a scmd entry into the ScsiLookup[] array list |
| 2493 |
* |
| 2494 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 2495 |
* @i: index into the array |
| 2496 |
* @scmd: scsi_cmnd pointer |
| 2497 |
* |
| 2498 |
**/ |
| 2499 |
static void |
| 2500 |
mptscsih_set_scsi_lookup(MPT_ADAPTER *ioc, int i, struct scsi_cmnd *scmd) |
| 2501 |
{ |
| 2502 |
unsigned long flags; |
| 2503 |
|
| 2504 |
spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); |
| 2505 |
ioc->ScsiLookup[i] = scmd; |
| 2506 |
spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); |
| 2507 |
} |
| 2508 |
|
| 2509 |
/** |
| 2510 |
* SCPNT_TO_LOOKUP_IDX - searches for a given scmd in the ScsiLookup[] array list |
| 2511 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 2512 |
* @sc: scsi_cmnd pointer |
| 2513 |
*/ |
| 2514 |
static int |
| 2515 |
SCPNT_TO_LOOKUP_IDX(MPT_ADAPTER *ioc, struct scsi_cmnd *sc) |
| 2516 |
{ |
| 2517 |
unsigned long flags; |
| 2518 |
int i, index=-1; |
| 2519 |
|
| 2520 |
spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); |
| 2521 |
for (i = 0; i < ioc->req_depth; i++) { |
| 2522 |
if (ioc->ScsiLookup[i] == sc) { |
| 2523 |
index = i; |
| 2524 |
goto out; |
| 2525 |
} |
| 2526 |
} |
| 2527 |
|
| 2528 |
out: |
| 2529 |
spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); |
| 2530 |
return index; |
| 2531 |
} |
| 2532 |
|
| 2533 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 2534 |
int |
| 2535 |
mptscsih_ioc_reset(MPT_ADAPTER *ioc, int reset_phase) |
| 2536 |
{ |
| 2537 |
MPT_SCSI_HOST *hd; |
| 2538 |
|
| 2539 |
if (ioc->sh == NULL || shost_priv(ioc->sh) == NULL) |
| 2540 |
return 0; |
| 2541 |
|
| 2542 |
hd = shost_priv(ioc->sh); |
| 2543 |
switch (reset_phase) { |
| 2544 |
case MPT_IOC_SETUP_RESET: |
| 2545 |
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 2546 |
"%s: MPT_IOC_SETUP_RESET\n", ioc->name, __func__)); |
| 2547 |
break; |
| 2548 |
case MPT_IOC_PRE_RESET: |
| 2549 |
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 2550 |
"%s: MPT_IOC_PRE_RESET\n", ioc->name, __func__)); |
| 2551 |
mptscsih_flush_running_cmds(hd); |
| 2552 |
break; |
| 2553 |
case MPT_IOC_POST_RESET: |
| 2554 |
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 2555 |
"%s: MPT_IOC_POST_RESET\n", ioc->name, __func__)); |
| 2556 |
if (ioc->internal_cmds.status & MPT_MGMT_STATUS_PENDING) { |
| 2557 |
ioc->internal_cmds.status |= |
| 2558 |
MPT_MGMT_STATUS_DID_IOCRESET; |
| 2559 |
complete(&ioc->internal_cmds.done); |
| 2560 |
} |
| 2561 |
break; |
| 2562 |
default: |
| 2563 |
break; |
| 2564 |
} |
| 2565 |
return 1; /* currently means nothing really */ |
| 2566 |
} |
| 2567 |
|
| 2568 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 2569 |
int |
| 2570 |
mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply) |
| 2571 |
{ |
| 2572 |
u8 event = le32_to_cpu(pEvReply->Event) & 0xFF; |
| 2573 |
|
| 2574 |
devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 2575 |
"MPT event (=%02Xh) routed to SCSI host driver!\n", |
| 2576 |
ioc->name, event)); |
| 2577 |
|
| 2578 |
if ((event == MPI_EVENT_IOC_BUS_RESET || |
| 2579 |
event == MPI_EVENT_EXT_BUS_RESET) && |
| 2580 |
(ioc->bus_type == SPI) && (ioc->soft_resets < -1)) |
| 2581 |
ioc->soft_resets++; |
| 2582 |
|
| 2583 |
return 1; /* currently means nothing really */ |
| 2584 |
} |
| 2585 |
|
| 2586 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 2587 |
/* |
| 2588 |
* Bus Scan and Domain Validation functionality ... |
| 2589 |
*/ |
| 2590 |
|
| 2591 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 2592 |
/* |
| 2593 |
* mptscsih_scandv_complete - Scan and DV callback routine registered |
| 2594 |
* to Fustion MPT (base) driver. |
| 2595 |
* |
| 2596 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 2597 |
* @mf: Pointer to original MPT request frame |
| 2598 |
* @mr: Pointer to MPT reply frame (NULL if TurboReply) |
| 2599 |
* |
| 2600 |
* This routine is called from mpt.c::mpt_interrupt() at the completion |
| 2601 |
* of any SCSI IO request. |
| 2602 |
* This routine is registered with the Fusion MPT (base) driver at driver |
| 2603 |
* load/init time via the mpt_register() API call. |
| 2604 |
* |
| 2605 |
* Returns 1 indicating alloc'd request frame ptr should be freed. |
| 2606 |
* |
| 2607 |
* Remark: Sets a completion code and (possibly) saves sense data |
| 2608 |
* in the IOC member localReply structure. |
| 2609 |
* Used ONLY for DV and other internal commands. |
| 2610 |
*/ |
| 2611 |
int |
| 2612 |
mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, |
| 2613 |
MPT_FRAME_HDR *reply) |
| 2614 |
{ |
| 2615 |
SCSIIORequest_t *pReq; |
| 2616 |
SCSIIOReply_t *pReply; |
| 2617 |
u8 cmd; |
| 2618 |
u16 req_idx; |
| 2619 |
u8 *sense_data; |
| 2620 |
int sz; |
| 2621 |
|
| 2622 |
ioc->internal_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD; |
| 2623 |
ioc->internal_cmds.completion_code = MPT_SCANDV_GOOD; |
| 2624 |
if (!reply) |
| 2625 |
goto out; |
| 2626 |
|
| 2627 |
pReply = (SCSIIOReply_t *) reply; |
| 2628 |
pReq = (SCSIIORequest_t *) req; |
| 2629 |
ioc->internal_cmds.completion_code = |
| 2630 |
mptscsih_get_completion_code(ioc, req, reply); |
| 2631 |
ioc->internal_cmds.status |= MPT_MGMT_STATUS_RF_VALID; |
| 2632 |
memcpy(ioc->internal_cmds.reply, reply, |
| 2633 |
min(MPT_DEFAULT_FRAME_SIZE, 4 * reply->u.reply.MsgLength)); |
| 2634 |
cmd = reply->u.hdr.Function; |
| 2635 |
if (((cmd == MPI_FUNCTION_SCSI_IO_REQUEST) || |
| 2636 |
(cmd == MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) && |
| 2637 |
(pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_VALID)) { |
| 2638 |
req_idx = le16_to_cpu(req->u.frame.hwhdr.msgctxu.fld.req_idx); |
| 2639 |
sense_data = ((u8 *)ioc->sense_buf_pool + |
| 2640 |
(req_idx * MPT_SENSE_BUFFER_ALLOC)); |
| 2641 |
sz = min_t(int, pReq->SenseBufferLength, |
| 2642 |
MPT_SENSE_BUFFER_ALLOC); |
| 2643 |
memcpy(ioc->internal_cmds.sense, sense_data, sz); |
| 2644 |
} |
| 2645 |
out: |
| 2646 |
if (!(ioc->internal_cmds.status & MPT_MGMT_STATUS_PENDING)) |
| 2647 |
return 0; |
| 2648 |
ioc->internal_cmds.status &= ~MPT_MGMT_STATUS_PENDING; |
| 2649 |
complete(&ioc->internal_cmds.done); |
| 2650 |
return 1; |
| 2651 |
} |
| 2652 |
|
| 2653 |
|
| 2654 |
/** |
| 2655 |
* mptscsih_get_completion_code - get completion code from MPT request |
| 2656 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 2657 |
* @req: Pointer to original MPT request frame |
| 2658 |
* @reply: Pointer to MPT reply frame (NULL if TurboReply) |
| 2659 |
* |
| 2660 |
**/ |
| 2661 |
static int |
| 2662 |
mptscsih_get_completion_code(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, |
| 2663 |
MPT_FRAME_HDR *reply) |
| 2664 |
{ |
| 2665 |
SCSIIOReply_t *pReply; |
| 2666 |
MpiRaidActionReply_t *pr; |
| 2667 |
u8 scsi_status; |
| 2668 |
u16 status; |
| 2669 |
int completion_code; |
| 2670 |
|
| 2671 |
pReply = (SCSIIOReply_t *)reply; |
| 2672 |
status = le16_to_cpu(pReply->IOCStatus) & MPI_IOCSTATUS_MASK; |
| 2673 |
scsi_status = pReply->SCSIStatus; |
| 2674 |
|
| 2675 |
devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 2676 |
"IOCStatus=%04xh, SCSIState=%02xh, SCSIStatus=%02xh," |
| 2677 |
"IOCLogInfo=%08xh\n", ioc->name, status, pReply->SCSIState, |
| 2678 |
scsi_status, le32_to_cpu(pReply->IOCLogInfo))); |
| 2679 |
|
| 2680 |
switch (status) { |
| 2681 |
|
| 2682 |
case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */ |
| 2683 |
completion_code = MPT_SCANDV_SELECTION_TIMEOUT; |
| 2684 |
break; |
| 2685 |
|
| 2686 |
case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */ |
| 2687 |
case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */ |
| 2688 |
case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */ |
| 2689 |
case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */ |
| 2690 |
completion_code = MPT_SCANDV_DID_RESET; |
| 2691 |
break; |
| 2692 |
|
| 2693 |
case MPI_IOCSTATUS_BUSY: |
| 2694 |
case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES: |
| 2695 |
completion_code = MPT_SCANDV_BUSY; |
| 2696 |
break; |
| 2697 |
|
| 2698 |
case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */ |
| 2699 |
case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */ |
| 2700 |
case MPI_IOCSTATUS_SUCCESS: /* 0x0000 */ |
| 2701 |
if (pReply->Function == MPI_FUNCTION_CONFIG) { |
| 2702 |
completion_code = MPT_SCANDV_GOOD; |
| 2703 |
} else if (pReply->Function == MPI_FUNCTION_RAID_ACTION) { |
| 2704 |
pr = (MpiRaidActionReply_t *)reply; |
| 2705 |
if (le16_to_cpu(pr->ActionStatus) == |
| 2706 |
MPI_RAID_ACTION_ASTATUS_SUCCESS) |
| 2707 |
completion_code = MPT_SCANDV_GOOD; |
| 2708 |
else |
| 2709 |
completion_code = MPT_SCANDV_SOME_ERROR; |
| 2710 |
} else if (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_VALID) |
| 2711 |
completion_code = MPT_SCANDV_SENSE; |
| 2712 |
else if (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_FAILED) { |
| 2713 |
if (req->u.scsireq.CDB[0] == INQUIRY) |
| 2714 |
completion_code = MPT_SCANDV_ISSUE_SENSE; |
| 2715 |
else |
| 2716 |
completion_code = MPT_SCANDV_DID_RESET; |
| 2717 |
} else if (pReply->SCSIState & MPI_SCSI_STATE_NO_SCSI_STATUS) |
| 2718 |
completion_code = MPT_SCANDV_DID_RESET; |
| 2719 |
else if (pReply->SCSIState & MPI_SCSI_STATE_TERMINATED) |
| 2720 |
completion_code = MPT_SCANDV_DID_RESET; |
| 2721 |
else if (scsi_status == MPI_SCSI_STATUS_BUSY) |
| 2722 |
completion_code = MPT_SCANDV_BUSY; |
| 2723 |
else |
| 2724 |
completion_code = MPT_SCANDV_GOOD; |
| 2725 |
break; |
| 2726 |
|
| 2727 |
case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */ |
| 2728 |
if (pReply->SCSIState & MPI_SCSI_STATE_TERMINATED) |
| 2729 |
completion_code = MPT_SCANDV_DID_RESET; |
| 2730 |
else |
| 2731 |
completion_code = MPT_SCANDV_SOME_ERROR; |
| 2732 |
break; |
| 2733 |
default: |
| 2734 |
completion_code = MPT_SCANDV_SOME_ERROR; |
| 2735 |
break; |
| 2736 |
|
| 2737 |
} /* switch(status) */ |
| 2738 |
|
| 2739 |
devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 2740 |
" completionCode set to %08xh\n", ioc->name, completion_code)); |
| 2741 |
return completion_code; |
| 2742 |
} |
| 2743 |
|
| 2744 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 2745 |
/** |
| 2746 |
* mptscsih_do_cmd - Do internal command. |
| 2747 |
* @hd: MPT_SCSI_HOST pointer |
| 2748 |
* @io: INTERNAL_CMD pointer. |
| 2749 |
* |
| 2750 |
* Issue the specified internally generated command and do command |
| 2751 |
* specific cleanup. For bus scan / DV only. |
| 2752 |
* NOTES: If command is Inquiry and status is good, |
| 2753 |
* initialize a target structure, save the data |
| 2754 |
* |
| 2755 |
* Remark: Single threaded access only. |
| 2756 |
* |
| 2757 |
* Return: |
| 2758 |
* < 0 if an illegal command or no resources |
| 2759 |
* |
| 2760 |
* 0 if good |
| 2761 |
* |
| 2762 |
* > 0 if command complete but some type of completion error. |
| 2763 |
*/ |
| 2764 |
static int |
| 2765 |
mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *io) |
| 2766 |
{ |
| 2767 |
MPT_FRAME_HDR *mf; |
| 2768 |
SCSIIORequest_t *pScsiReq; |
| 2769 |
int my_idx, ii, dir; |
| 2770 |
int timeout; |
| 2771 |
char cmdLen; |
| 2772 |
char CDB[]={0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0}; |
| 2773 |
u8 cmd = io->cmd; |
| 2774 |
MPT_ADAPTER *ioc = hd->ioc; |
| 2775 |
int ret = 0; |
| 2776 |
unsigned long timeleft; |
| 2777 |
unsigned long flags; |
| 2778 |
|
| 2779 |
/* don't send internal command during diag reset */ |
| 2780 |
spin_lock_irqsave(&ioc->taskmgmt_lock, flags); |
| 2781 |
if (ioc->ioc_reset_in_progress) { |
| 2782 |
spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); |
| 2783 |
dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 2784 |
"%s: busy with host reset\n", ioc->name, __func__)); |
| 2785 |
return MPT_SCANDV_BUSY; |
| 2786 |
} |
| 2787 |
spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); |
| 2788 |
|
| 2789 |
mutex_lock(&ioc->internal_cmds.mutex); |
| 2790 |
|
| 2791 |
/* Set command specific information |
| 2792 |
*/ |
| 2793 |
switch (cmd) { |
| 2794 |
case INQUIRY: |
| 2795 |
cmdLen = 6; |
| 2796 |
dir = MPI_SCSIIO_CONTROL_READ; |
| 2797 |
CDB[0] = cmd; |
| 2798 |
CDB[4] = io->size; |
| 2799 |
timeout = 10; |
| 2800 |
break; |
| 2801 |
|
| 2802 |
case TEST_UNIT_READY: |
| 2803 |
cmdLen = 6; |
| 2804 |
dir = MPI_SCSIIO_CONTROL_READ; |
| 2805 |
timeout = 10; |
| 2806 |
break; |
| 2807 |
|
| 2808 |
case START_STOP: |
| 2809 |
cmdLen = 6; |
| 2810 |
dir = MPI_SCSIIO_CONTROL_READ; |
| 2811 |
CDB[0] = cmd; |
| 2812 |
CDB[4] = 1; /*Spin up the disk */ |
| 2813 |
timeout = 15; |
| 2814 |
break; |
| 2815 |
|
| 2816 |
case REQUEST_SENSE: |
| 2817 |
cmdLen = 6; |
| 2818 |
CDB[0] = cmd; |
| 2819 |
CDB[4] = io->size; |
| 2820 |
dir = MPI_SCSIIO_CONTROL_READ; |
| 2821 |
timeout = 10; |
| 2822 |
break; |
| 2823 |
|
| 2824 |
case READ_BUFFER: |
| 2825 |
cmdLen = 10; |
| 2826 |
dir = MPI_SCSIIO_CONTROL_READ; |
| 2827 |
CDB[0] = cmd; |
| 2828 |
if (io->flags & MPT_ICFLAG_ECHO) { |
| 2829 |
CDB[1] = 0x0A; |
| 2830 |
} else { |
| 2831 |
CDB[1] = 0x02; |
| 2832 |
} |
| 2833 |
|
| 2834 |
if (io->flags & MPT_ICFLAG_BUF_CAP) { |
| 2835 |
CDB[1] |= 0x01; |
| 2836 |
} |
| 2837 |
CDB[6] = (io->size >> 16) & 0xFF; |
| 2838 |
CDB[7] = (io->size >> 8) & 0xFF; |
| 2839 |
CDB[8] = io->size & 0xFF; |
| 2840 |
timeout = 10; |
| 2841 |
break; |
| 2842 |
|
| 2843 |
case WRITE_BUFFER: |
| 2844 |
cmdLen = 10; |
| 2845 |
dir = MPI_SCSIIO_CONTROL_WRITE; |
| 2846 |
CDB[0] = cmd; |
| 2847 |
if (io->flags & MPT_ICFLAG_ECHO) { |
| 2848 |
CDB[1] = 0x0A; |
| 2849 |
} else { |
| 2850 |
CDB[1] = 0x02; |
| 2851 |
} |
| 2852 |
CDB[6] = (io->size >> 16) & 0xFF; |
| 2853 |
CDB[7] = (io->size >> 8) & 0xFF; |
| 2854 |
CDB[8] = io->size & 0xFF; |
| 2855 |
timeout = 10; |
| 2856 |
break; |
| 2857 |
|
| 2858 |
case RESERVE_6: |
| 2859 |
cmdLen = 6; |
| 2860 |
dir = MPI_SCSIIO_CONTROL_READ; |
| 2861 |
CDB[0] = cmd; |
| 2862 |
timeout = 10; |
| 2863 |
break; |
| 2864 |
|
| 2865 |
case RELEASE_6: |
| 2866 |
cmdLen = 6; |
| 2867 |
dir = MPI_SCSIIO_CONTROL_READ; |
| 2868 |
CDB[0] = cmd; |
| 2869 |
timeout = 10; |
| 2870 |
break; |
| 2871 |
|
| 2872 |
case SYNCHRONIZE_CACHE: |
| 2873 |
cmdLen = 10; |
| 2874 |
dir = MPI_SCSIIO_CONTROL_READ; |
| 2875 |
CDB[0] = cmd; |
| 2876 |
// CDB[1] = 0x02; /* set immediate bit */ |
| 2877 |
timeout = 10; |
| 2878 |
break; |
| 2879 |
|
| 2880 |
default: |
| 2881 |
/* Error Case */ |
| 2882 |
ret = -EFAULT; |
| 2883 |
goto out; |
| 2884 |
} |
| 2885 |
|
| 2886 |
/* Get and Populate a free Frame |
| 2887 |
* MsgContext set in mpt_get_msg_frame call |
| 2888 |
*/ |
| 2889 |
if ((mf = mpt_get_msg_frame(ioc->InternalCtx, ioc)) == NULL) { |
| 2890 |
dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: No msg frames!\n", |
| 2891 |
ioc->name, __func__)); |
| 2892 |
ret = MPT_SCANDV_BUSY; |
| 2893 |
goto out; |
| 2894 |
} |
| 2895 |
|
| 2896 |
pScsiReq = (SCSIIORequest_t *) mf; |
| 2897 |
|
| 2898 |
/* Get the request index */ |
| 2899 |
my_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx); |
| 2900 |
ADD_INDEX_LOG(my_idx); /* for debug */ |
| 2901 |
|
| 2902 |
if (io->flags & MPT_ICFLAG_PHYS_DISK) { |
| 2903 |
pScsiReq->TargetID = io->physDiskNum; |
| 2904 |
pScsiReq->Bus = 0; |
| 2905 |
pScsiReq->ChainOffset = 0; |
| 2906 |
pScsiReq->Function = MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH; |
| 2907 |
} else { |
| 2908 |
pScsiReq->TargetID = io->id; |
| 2909 |
pScsiReq->Bus = io->channel; |
| 2910 |
pScsiReq->ChainOffset = 0; |
| 2911 |
pScsiReq->Function = MPI_FUNCTION_SCSI_IO_REQUEST; |
| 2912 |
} |
| 2913 |
|
| 2914 |
pScsiReq->CDBLength = cmdLen; |
| 2915 |
pScsiReq->SenseBufferLength = MPT_SENSE_BUFFER_SIZE; |
| 2916 |
|
| 2917 |
pScsiReq->Reserved = 0; |
| 2918 |
|
| 2919 |
pScsiReq->MsgFlags = mpt_msg_flags(ioc); |
| 2920 |
/* MsgContext set in mpt_get_msg_fram call */ |
| 2921 |
|
| 2922 |
int_to_scsilun(io->lun, (struct scsi_lun *)pScsiReq->LUN); |
| 2923 |
|
| 2924 |
if (io->flags & MPT_ICFLAG_TAGGED_CMD) |
| 2925 |
pScsiReq->Control = cpu_to_le32(dir | MPI_SCSIIO_CONTROL_SIMPLEQ); |
| 2926 |
else |
| 2927 |
pScsiReq->Control = cpu_to_le32(dir | MPI_SCSIIO_CONTROL_UNTAGGED); |
| 2928 |
|
| 2929 |
if (cmd == REQUEST_SENSE) { |
| 2930 |
pScsiReq->Control = cpu_to_le32(dir | MPI_SCSIIO_CONTROL_UNTAGGED); |
| 2931 |
devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 2932 |
"%s: Untagged! 0x%02x\n", ioc->name, __func__, cmd)); |
| 2933 |
} |
| 2934 |
|
| 2935 |
for (ii = 0; ii < 16; ii++) |
| 2936 |
pScsiReq->CDB[ii] = CDB[ii]; |
| 2937 |
|
| 2938 |
pScsiReq->DataLength = cpu_to_le32(io->size); |
| 2939 |
pScsiReq->SenseBufferLowAddr = cpu_to_le32(ioc->sense_buf_low_dma |
| 2940 |
+ (my_idx * MPT_SENSE_BUFFER_ALLOC)); |
| 2941 |
|
| 2942 |
devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 2943 |
"%s: Sending Command 0x%02x for fw_channel=%d fw_id=%d lun=%llu\n", |
| 2944 |
ioc->name, __func__, cmd, io->channel, io->id, io->lun)); |
| 2945 |
|
| 2946 |
if (dir == MPI_SCSIIO_CONTROL_READ) |
| 2947 |
ioc->add_sge((char *) &pScsiReq->SGL, |
| 2948 |
MPT_SGE_FLAGS_SSIMPLE_READ | io->size, io->data_dma); |
| 2949 |
else |
| 2950 |
ioc->add_sge((char *) &pScsiReq->SGL, |
| 2951 |
MPT_SGE_FLAGS_SSIMPLE_WRITE | io->size, io->data_dma); |
| 2952 |
|
| 2953 |
INITIALIZE_MGMT_STATUS(ioc->internal_cmds.status) |
| 2954 |
mpt_put_msg_frame(ioc->InternalCtx, ioc, mf); |
| 2955 |
timeleft = wait_for_completion_timeout(&ioc->internal_cmds.done, |
| 2956 |
timeout*HZ); |
| 2957 |
if (!(ioc->internal_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) { |
| 2958 |
ret = MPT_SCANDV_DID_RESET; |
| 2959 |
dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 2960 |
"%s: TIMED OUT for cmd=0x%02x\n", ioc->name, __func__, |
| 2961 |
cmd)); |
| 2962 |
if (ioc->internal_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) { |
| 2963 |
mpt_free_msg_frame(ioc, mf); |
| 2964 |
goto out; |
| 2965 |
} |
| 2966 |
if (!timeleft) { |
| 2967 |
printk(MYIOC_s_WARN_FMT |
| 2968 |
"Issuing Reset from %s!! doorbell=0x%08xh" |
| 2969 |
" cmd=0x%02x\n", |
| 2970 |
ioc->name, __func__, mpt_GetIocState(ioc, 0), |
| 2971 |
cmd); |
| 2972 |
mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP); |
| 2973 |
mpt_free_msg_frame(ioc, mf); |
| 2974 |
} |
| 2975 |
goto out; |
| 2976 |
} |
| 2977 |
|
| 2978 |
ret = ioc->internal_cmds.completion_code; |
| 2979 |
devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: success, rc=0x%02x\n", |
| 2980 |
ioc->name, __func__, ret)); |
| 2981 |
|
| 2982 |
out: |
| 2983 |
CLEAR_MGMT_STATUS(ioc->internal_cmds.status) |
| 2984 |
mutex_unlock(&ioc->internal_cmds.mutex); |
| 2985 |
return ret; |
| 2986 |
} |
| 2987 |
|
| 2988 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 2989 |
/** |
| 2990 |
* mptscsih_synchronize_cache - Send SYNCHRONIZE_CACHE to all disks. |
| 2991 |
* @hd: Pointer to a SCSI HOST structure |
| 2992 |
* @vdevice: virtual target device |
| 2993 |
* |
| 2994 |
* Uses the ISR, but with special processing. |
| 2995 |
* MUST be single-threaded. |
| 2996 |
* |
| 2997 |
*/ |
| 2998 |
static void |
| 2999 |
mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, VirtDevice *vdevice) |
| 3000 |
{ |
| 3001 |
INTERNAL_CMD iocmd; |
| 3002 |
|
| 3003 |
/* Ignore hidden raid components, this is handled when the command |
| 3004 |
* is sent to the volume |
| 3005 |
*/ |
| 3006 |
if (vdevice->vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT) |
| 3007 |
return; |
| 3008 |
|
| 3009 |
if (vdevice->vtarget->type != TYPE_DISK || vdevice->vtarget->deleted || |
| 3010 |
!vdevice->configured_lun) |
| 3011 |
return; |
| 3012 |
|
| 3013 |
/* Following parameters will not change |
| 3014 |
* in this routine. |
| 3015 |
*/ |
| 3016 |
iocmd.cmd = SYNCHRONIZE_CACHE; |
| 3017 |
iocmd.flags = 0; |
| 3018 |
iocmd.physDiskNum = -1; |
| 3019 |
iocmd.data = NULL; |
| 3020 |
iocmd.data_dma = -1; |
| 3021 |
iocmd.size = 0; |
| 3022 |
iocmd.rsvd = iocmd.rsvd2 = 0; |
| 3023 |
iocmd.channel = vdevice->vtarget->channel; |
| 3024 |
iocmd.id = vdevice->vtarget->id; |
| 3025 |
iocmd.lun = vdevice->lun; |
| 3026 |
|
| 3027 |
mptscsih_do_cmd(hd, &iocmd); |
| 3028 |
} |
| 3029 |
|
| 3030 |
static ssize_t |
| 3031 |
mptscsih_version_fw_show(struct device *dev, struct device_attribute *attr, |
| 3032 |
char *buf) |
| 3033 |
{ |
| 3034 |
struct Scsi_Host *host = class_to_shost(dev); |
| 3035 |
MPT_SCSI_HOST *hd = shost_priv(host); |
| 3036 |
MPT_ADAPTER *ioc = hd->ioc; |
| 3037 |
|
| 3038 |
return snprintf(buf, PAGE_SIZE, "%02d.%02d.%02d.%02d\n", |
| 3039 |
(ioc->facts.FWVersion.Word & 0xFF000000) >> 24, |
| 3040 |
(ioc->facts.FWVersion.Word & 0x00FF0000) >> 16, |
| 3041 |
(ioc->facts.FWVersion.Word & 0x0000FF00) >> 8, |
| 3042 |
ioc->facts.FWVersion.Word & 0x000000FF); |
| 3043 |
} |
| 3044 |
static DEVICE_ATTR(version_fw, S_IRUGO, mptscsih_version_fw_show, NULL); |
| 3045 |
|
| 3046 |
static ssize_t |
| 3047 |
mptscsih_version_bios_show(struct device *dev, struct device_attribute *attr, |
| 3048 |
char *buf) |
| 3049 |
{ |
| 3050 |
struct Scsi_Host *host = class_to_shost(dev); |
| 3051 |
MPT_SCSI_HOST *hd = shost_priv(host); |
| 3052 |
MPT_ADAPTER *ioc = hd->ioc; |
| 3053 |
|
| 3054 |
return snprintf(buf, PAGE_SIZE, "%02x.%02x.%02x.%02x\n", |
| 3055 |
(ioc->biosVersion & 0xFF000000) >> 24, |
| 3056 |
(ioc->biosVersion & 0x00FF0000) >> 16, |
| 3057 |
(ioc->biosVersion & 0x0000FF00) >> 8, |
| 3058 |
ioc->biosVersion & 0x000000FF); |
| 3059 |
} |
| 3060 |
static DEVICE_ATTR(version_bios, S_IRUGO, mptscsih_version_bios_show, NULL); |
| 3061 |
|
| 3062 |
static ssize_t |
| 3063 |
mptscsih_version_mpi_show(struct device *dev, struct device_attribute *attr, |
| 3064 |
char *buf) |
| 3065 |
{ |
| 3066 |
struct Scsi_Host *host = class_to_shost(dev); |
| 3067 |
MPT_SCSI_HOST *hd = shost_priv(host); |
| 3068 |
MPT_ADAPTER *ioc = hd->ioc; |
| 3069 |
|
| 3070 |
return snprintf(buf, PAGE_SIZE, "%03x\n", ioc->facts.MsgVersion); |
| 3071 |
} |
| 3072 |
static DEVICE_ATTR(version_mpi, S_IRUGO, mptscsih_version_mpi_show, NULL); |
| 3073 |
|
| 3074 |
static ssize_t |
| 3075 |
mptscsih_version_product_show(struct device *dev, |
| 3076 |
struct device_attribute *attr, |
| 3077 |
char *buf) |
| 3078 |
{ |
| 3079 |
struct Scsi_Host *host = class_to_shost(dev); |
| 3080 |
MPT_SCSI_HOST *hd = shost_priv(host); |
| 3081 |
MPT_ADAPTER *ioc = hd->ioc; |
| 3082 |
|
| 3083 |
return snprintf(buf, PAGE_SIZE, "%s\n", ioc->prod_name); |
| 3084 |
} |
| 3085 |
static DEVICE_ATTR(version_product, S_IRUGO, |
| 3086 |
mptscsih_version_product_show, NULL); |
| 3087 |
|
| 3088 |
static ssize_t |
| 3089 |
mptscsih_version_nvdata_persistent_show(struct device *dev, |
| 3090 |
struct device_attribute *attr, |
| 3091 |
char *buf) |
| 3092 |
{ |
| 3093 |
struct Scsi_Host *host = class_to_shost(dev); |
| 3094 |
MPT_SCSI_HOST *hd = shost_priv(host); |
| 3095 |
MPT_ADAPTER *ioc = hd->ioc; |
| 3096 |
|
| 3097 |
return snprintf(buf, PAGE_SIZE, "%02xh\n", |
| 3098 |
ioc->nvdata_version_persistent); |
| 3099 |
} |
| 3100 |
static DEVICE_ATTR(version_nvdata_persistent, S_IRUGO, |
| 3101 |
mptscsih_version_nvdata_persistent_show, NULL); |
| 3102 |
|
| 3103 |
static ssize_t |
| 3104 |
mptscsih_version_nvdata_default_show(struct device *dev, |
| 3105 |
struct device_attribute *attr, char *buf) |
| 3106 |
{ |
| 3107 |
struct Scsi_Host *host = class_to_shost(dev); |
| 3108 |
MPT_SCSI_HOST *hd = shost_priv(host); |
| 3109 |
MPT_ADAPTER *ioc = hd->ioc; |
| 3110 |
|
| 3111 |
return snprintf(buf, PAGE_SIZE, "%02xh\n",ioc->nvdata_version_default); |
| 3112 |
} |
| 3113 |
static DEVICE_ATTR(version_nvdata_default, S_IRUGO, |
| 3114 |
mptscsih_version_nvdata_default_show, NULL); |
| 3115 |
|
| 3116 |
static ssize_t |
| 3117 |
mptscsih_board_name_show(struct device *dev, struct device_attribute *attr, |
| 3118 |
char *buf) |
| 3119 |
{ |
| 3120 |
struct Scsi_Host *host = class_to_shost(dev); |
| 3121 |
MPT_SCSI_HOST *hd = shost_priv(host); |
| 3122 |
MPT_ADAPTER *ioc = hd->ioc; |
| 3123 |
|
| 3124 |
return snprintf(buf, PAGE_SIZE, "%s\n", ioc->board_name); |
| 3125 |
} |
| 3126 |
static DEVICE_ATTR(board_name, S_IRUGO, mptscsih_board_name_show, NULL); |
| 3127 |
|
| 3128 |
static ssize_t |
| 3129 |
mptscsih_board_assembly_show(struct device *dev, |
| 3130 |
struct device_attribute *attr, char *buf) |
| 3131 |
{ |
| 3132 |
struct Scsi_Host *host = class_to_shost(dev); |
| 3133 |
MPT_SCSI_HOST *hd = shost_priv(host); |
| 3134 |
MPT_ADAPTER *ioc = hd->ioc; |
| 3135 |
|
| 3136 |
return snprintf(buf, PAGE_SIZE, "%s\n", ioc->board_assembly); |
| 3137 |
} |
| 3138 |
static DEVICE_ATTR(board_assembly, S_IRUGO, |
| 3139 |
mptscsih_board_assembly_show, NULL); |
| 3140 |
|
| 3141 |
static ssize_t |
| 3142 |
mptscsih_board_tracer_show(struct device *dev, struct device_attribute *attr, |
| 3143 |
char *buf) |
| 3144 |
{ |
| 3145 |
struct Scsi_Host *host = class_to_shost(dev); |
| 3146 |
MPT_SCSI_HOST *hd = shost_priv(host); |
| 3147 |
MPT_ADAPTER *ioc = hd->ioc; |
| 3148 |
|
| 3149 |
return snprintf(buf, PAGE_SIZE, "%s\n", ioc->board_tracer); |
| 3150 |
} |
| 3151 |
static DEVICE_ATTR(board_tracer, S_IRUGO, |
| 3152 |
mptscsih_board_tracer_show, NULL); |
| 3153 |
|
| 3154 |
static ssize_t |
| 3155 |
mptscsih_io_delay_show(struct device *dev, struct device_attribute *attr, |
| 3156 |
char *buf) |
| 3157 |
{ |
| 3158 |
struct Scsi_Host *host = class_to_shost(dev); |
| 3159 |
MPT_SCSI_HOST *hd = shost_priv(host); |
| 3160 |
MPT_ADAPTER *ioc = hd->ioc; |
| 3161 |
|
| 3162 |
return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->io_missing_delay); |
| 3163 |
} |
| 3164 |
static DEVICE_ATTR(io_delay, S_IRUGO, |
| 3165 |
mptscsih_io_delay_show, NULL); |
| 3166 |
|
| 3167 |
static ssize_t |
| 3168 |
mptscsih_device_delay_show(struct device *dev, struct device_attribute *attr, |
| 3169 |
char *buf) |
| 3170 |
{ |
| 3171 |
struct Scsi_Host *host = class_to_shost(dev); |
| 3172 |
MPT_SCSI_HOST *hd = shost_priv(host); |
| 3173 |
MPT_ADAPTER *ioc = hd->ioc; |
| 3174 |
|
| 3175 |
return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->device_missing_delay); |
| 3176 |
} |
| 3177 |
static DEVICE_ATTR(device_delay, S_IRUGO, |
| 3178 |
mptscsih_device_delay_show, NULL); |
| 3179 |
|
| 3180 |
static ssize_t |
| 3181 |
mptscsih_debug_level_show(struct device *dev, struct device_attribute *attr, |
| 3182 |
char *buf) |
| 3183 |
{ |
| 3184 |
struct Scsi_Host *host = class_to_shost(dev); |
| 3185 |
MPT_SCSI_HOST *hd = shost_priv(host); |
| 3186 |
MPT_ADAPTER *ioc = hd->ioc; |
| 3187 |
|
| 3188 |
return snprintf(buf, PAGE_SIZE, "%08xh\n", ioc->debug_level); |
| 3189 |
} |
| 3190 |
static ssize_t |
| 3191 |
mptscsih_debug_level_store(struct device *dev, struct device_attribute *attr, |
| 3192 |
const char *buf, size_t count) |
| 3193 |
{ |
| 3194 |
struct Scsi_Host *host = class_to_shost(dev); |
| 3195 |
MPT_SCSI_HOST *hd = shost_priv(host); |
| 3196 |
MPT_ADAPTER *ioc = hd->ioc; |
| 3197 |
int val = 0; |
| 3198 |
|
| 3199 |
if (sscanf(buf, "%x", &val) != 1) |
| 3200 |
return -EINVAL; |
| 3201 |
|
| 3202 |
ioc->debug_level = val; |
| 3203 |
printk(MYIOC_s_INFO_FMT "debug_level=%08xh\n", |
| 3204 |
ioc->name, ioc->debug_level); |
| 3205 |
return strlen(buf); |
| 3206 |
} |
| 3207 |
static DEVICE_ATTR(debug_level, S_IRUGO | S_IWUSR, |
| 3208 |
mptscsih_debug_level_show, mptscsih_debug_level_store); |
| 3209 |
|
| 3210 |
static struct attribute *mptscsih_host_attrs[] = { |
| 3211 |
&dev_attr_version_fw.attr, |
| 3212 |
&dev_attr_version_bios.attr, |
| 3213 |
&dev_attr_version_mpi.attr, |
| 3214 |
&dev_attr_version_product.attr, |
| 3215 |
&dev_attr_version_nvdata_persistent.attr, |
| 3216 |
&dev_attr_version_nvdata_default.attr, |
| 3217 |
&dev_attr_board_name.attr, |
| 3218 |
&dev_attr_board_assembly.attr, |
| 3219 |
&dev_attr_board_tracer.attr, |
| 3220 |
&dev_attr_io_delay.attr, |
| 3221 |
&dev_attr_device_delay.attr, |
| 3222 |
&dev_attr_debug_level.attr, |
| 3223 |
NULL, |
| 3224 |
}; |
| 3225 |
|
| 3226 |
static const struct attribute_group mptscsih_host_attr_group = { |
| 3227 |
.attrs = mptscsih_host_attrs |
| 3228 |
}; |
| 3229 |
|
| 3230 |
const struct attribute_group *mptscsih_host_attr_groups[] = { |
| 3231 |
&mptscsih_host_attr_group, |
| 3232 |
NULL |
| 3233 |
}; |
| 3234 |
EXPORT_SYMBOL(mptscsih_host_attr_groups); |
| 3235 |
|
| 3236 |
EXPORT_SYMBOL(mptscsih_remove); |
| 3237 |
EXPORT_SYMBOL(mptscsih_shutdown); |
| 3238 |
#ifdef CONFIG_PM |
| 3239 |
EXPORT_SYMBOL(mptscsih_suspend); |
| 3240 |
EXPORT_SYMBOL(mptscsih_resume); |
| 3241 |
#endif |
| 3242 |
EXPORT_SYMBOL(mptscsih_show_info); |
| 3243 |
EXPORT_SYMBOL(mptscsih_info); |
| 3244 |
EXPORT_SYMBOL(mptscsih_qcmd); |
| 3245 |
EXPORT_SYMBOL(mptscsih_sdev_destroy); |
| 3246 |
EXPORT_SYMBOL(mptscsih_sdev_configure); |
| 3247 |
EXPORT_SYMBOL(mptscsih_abort); |
| 3248 |
EXPORT_SYMBOL(mptscsih_dev_reset); |
| 3249 |
EXPORT_SYMBOL(mptscsih_bus_reset); |
| 3250 |
EXPORT_SYMBOL(mptscsih_host_reset); |
| 3251 |
EXPORT_SYMBOL(mptscsih_bios_param); |
| 3252 |
EXPORT_SYMBOL(mptscsih_io_done); |
| 3253 |
EXPORT_SYMBOL(mptscsih_taskmgmt_complete); |
| 3254 |
EXPORT_SYMBOL(mptscsih_scandv_complete); |
| 3255 |
EXPORT_SYMBOL(mptscsih_event_process); |
| 3256 |
EXPORT_SYMBOL(mptscsih_ioc_reset); |
| 3257 |
EXPORT_SYMBOL(mptscsih_change_queue_depth); |
| 3258 |
|
| 3259 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |