| 1 |
/* |
| 2 |
* linux/drivers/message/fusion/mptbase.h |
| 3 |
* High performance SCSI + LAN / Fibre Channel device drivers. |
| 4 |
* For use with PCI chip/adapter(s): |
| 5 |
* LSIFC9xx/LSI409xx Fibre Channel |
| 6 |
* running LSI Fusion MPT (Message Passing Technology) firmware. |
| 7 |
* |
| 8 |
* Copyright (c) 1999-2008 LSI Corporation |
| 9 |
* (mailto:[email protected]) |
| 10 |
* |
| 11 |
*/ |
| 12 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 13 |
/* |
| 14 |
This program is free software; you can redistribute it and/or modify |
| 15 |
it under the terms of the GNU General Public License as published by |
| 16 |
the Free Software Foundation; version 2 of the License. |
| 17 |
|
| 18 |
This program is distributed in the hope that it will be useful, |
| 19 |
but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 20 |
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 21 |
GNU General Public License for more details. |
| 22 |
|
| 23 |
NO WARRANTY |
| 24 |
THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR |
| 25 |
CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT |
| 26 |
LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, |
| 27 |
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is |
| 28 |
solely responsible for determining the appropriateness of using and |
| 29 |
distributing the Program and assumes all risks associated with its |
| 30 |
exercise of rights under this Agreement, including but not limited to |
| 31 |
the risks and costs of program errors, damage to or loss of data, |
| 32 |
programs or equipment, and unavailability or interruption of operations. |
| 33 |
|
| 34 |
DISCLAIMER OF LIABILITY |
| 35 |
NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY |
| 36 |
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| 37 |
DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND |
| 38 |
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR |
| 39 |
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE |
| 40 |
USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED |
| 41 |
HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES |
| 42 |
|
| 43 |
You should have received a copy of the GNU General Public License |
| 44 |
along with this program; if not, write to the Free Software |
| 45 |
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| 46 |
*/ |
| 47 |
|
| 48 |
#ifndef MPTBASE_H_INCLUDED |
| 49 |
#define MPTBASE_H_INCLUDED |
| 50 |
/*{-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 51 |
|
| 52 |
#include <linux/kernel.h> |
| 53 |
#include <linux/pci.h> |
| 54 |
#include <linux/mutex.h> |
| 55 |
|
| 56 |
#include "lsi/mpi_type.h" |
| 57 |
#include "lsi/mpi.h" /* Fusion MPI(nterface) basic defs */ |
| 58 |
#include "lsi/mpi_ioc.h" /* Fusion MPT IOC(ontroller) defs */ |
| 59 |
#include "lsi/mpi_cnfg.h" /* IOC configuration support */ |
| 60 |
#include "lsi/mpi_init.h" /* SCSI Host (initiator) protocol support */ |
| 61 |
#include "lsi/mpi_lan.h" /* LAN over FC protocol support */ |
| 62 |
#include "lsi/mpi_raid.h" /* Integrated Mirroring support */ |
| 63 |
|
| 64 |
#include "lsi/mpi_fc.h" /* Fibre Channel (lowlevel) support */ |
| 65 |
#include "lsi/mpi_targ.h" /* SCSI/FCP Target protcol support */ |
| 66 |
#include "lsi/mpi_tool.h" /* Tools support */ |
| 67 |
#include "lsi/mpi_sas.h" /* SAS support */ |
| 68 |
|
| 69 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 70 |
|
| 71 |
#ifndef MODULEAUTHOR |
| 72 |
#define MODULEAUTHOR "LSI Corporation" |
| 73 |
#endif |
| 74 |
|
| 75 |
#ifndef COPYRIGHT |
| 76 |
#define COPYRIGHT "Copyright (c) 1999-2008 " MODULEAUTHOR |
| 77 |
#endif |
| 78 |
|
| 79 |
#define MPT_LINUX_VERSION_COMMON "3.04.20" |
| 80 |
#define MPT_LINUX_PACKAGE_NAME "@(#)mptlinux-3.04.20" |
| 81 |
#define WHAT_MAGIC_STRING "@" "(" "#" ")" |
| 82 |
|
| 83 |
#define show_mptmod_ver(s,ver) \ |
| 84 |
printk(KERN_INFO "%s %s\n", s, ver); |
| 85 |
|
| 86 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 87 |
/* |
| 88 |
* Fusion MPT(linux) driver configurable stuff... |
| 89 |
*/ |
| 90 |
#define MPT_MAX_ADAPTERS 18 |
| 91 |
#define MPT_MAX_PROTOCOL_DRIVERS 16 |
| 92 |
#define MPT_MAX_CALLBACKNAME_LEN 49 |
| 93 |
#define MPT_MAX_BUS 1 /* Do not change */ |
| 94 |
#define MPT_MAX_FC_DEVICES 255 |
| 95 |
#define MPT_MAX_SCSI_DEVICES 16 |
| 96 |
#define MPT_LAST_LUN 255 |
| 97 |
#define MPT_SENSE_BUFFER_ALLOC 64 |
| 98 |
/* allow for 256 max sense alloc, but only 255 max request */ |
| 99 |
#if MPT_SENSE_BUFFER_ALLOC >= 256 |
| 100 |
# undef MPT_SENSE_BUFFER_ALLOC |
| 101 |
# define MPT_SENSE_BUFFER_ALLOC 256 |
| 102 |
# define MPT_SENSE_BUFFER_SIZE 255 |
| 103 |
#else |
| 104 |
# define MPT_SENSE_BUFFER_SIZE MPT_SENSE_BUFFER_ALLOC |
| 105 |
#endif |
| 106 |
|
| 107 |
#define MPT_NAME_LENGTH 32 |
| 108 |
#define MPT_KOBJ_NAME_LEN 20 |
| 109 |
|
| 110 |
#define MPT_PROCFS_MPTBASEDIR "mpt" |
| 111 |
/* chg it to "driver/fusion" ? */ |
| 112 |
#define MPT_PROCFS_SUMMARY_ALL_NODE MPT_PROCFS_MPTBASEDIR "/summary" |
| 113 |
#define MPT_PROCFS_SUMMARY_ALL_PATHNAME "/proc/" MPT_PROCFS_SUMMARY_ALL_NODE |
| 114 |
#define MPT_FW_REV_MAGIC_ID_STRING "FwRev=" |
| 115 |
|
| 116 |
#define MPT_MAX_REQ_DEPTH 1023 |
| 117 |
#define MPT_DEFAULT_REQ_DEPTH 256 |
| 118 |
#define MPT_MIN_REQ_DEPTH 128 |
| 119 |
|
| 120 |
#define MPT_MAX_REPLY_DEPTH MPT_MAX_REQ_DEPTH |
| 121 |
#define MPT_DEFAULT_REPLY_DEPTH 128 |
| 122 |
#define MPT_MIN_REPLY_DEPTH 8 |
| 123 |
#define MPT_MAX_REPLIES_PER_ISR 32 |
| 124 |
|
| 125 |
#define MPT_MAX_FRAME_SIZE 128 |
| 126 |
#define MPT_DEFAULT_FRAME_SIZE 128 |
| 127 |
|
| 128 |
#define MPT_REPLY_FRAME_SIZE 0x50 /* Must be a multiple of 8 */ |
| 129 |
|
| 130 |
#define MPT_SG_REQ_128_SCALE 1 |
| 131 |
#define MPT_SG_REQ_96_SCALE 2 |
| 132 |
#define MPT_SG_REQ_64_SCALE 4 |
| 133 |
|
| 134 |
#define CAN_SLEEP 1 |
| 135 |
#define NO_SLEEP 0 |
| 136 |
|
| 137 |
#define MPT_COALESCING_TIMEOUT 0x10 |
| 138 |
|
| 139 |
|
| 140 |
/* |
| 141 |
* SCSI transfer rate defines. |
| 142 |
*/ |
| 143 |
#define MPT_ULTRA320 0x08 |
| 144 |
#define MPT_ULTRA160 0x09 |
| 145 |
#define MPT_ULTRA2 0x0A |
| 146 |
#define MPT_ULTRA 0x0C |
| 147 |
#define MPT_FAST 0x19 |
| 148 |
#define MPT_SCSI 0x32 |
| 149 |
#define MPT_ASYNC 0xFF |
| 150 |
|
| 151 |
#define MPT_NARROW 0 |
| 152 |
#define MPT_WIDE 1 |
| 153 |
|
| 154 |
#define C0_1030 0x08 |
| 155 |
#define XL_929 0x01 |
| 156 |
|
| 157 |
|
| 158 |
/* |
| 159 |
* Try to keep these at 2^N-1 |
| 160 |
*/ |
| 161 |
#define MPT_FC_CAN_QUEUE 1024 |
| 162 |
#define MPT_SCSI_CAN_QUEUE 127 |
| 163 |
#define MPT_SAS_CAN_QUEUE 127 |
| 164 |
|
| 165 |
/* |
| 166 |
* Set the MAX_SGE value based on user input. |
| 167 |
*/ |
| 168 |
#ifdef CONFIG_FUSION_MAX_SGE |
| 169 |
#if CONFIG_FUSION_MAX_SGE < 16 |
| 170 |
#define MPT_SCSI_SG_DEPTH 16 |
| 171 |
#elif CONFIG_FUSION_MAX_SGE > 128 |
| 172 |
#define MPT_SCSI_SG_DEPTH 128 |
| 173 |
#else |
| 174 |
#define MPT_SCSI_SG_DEPTH CONFIG_FUSION_MAX_SGE |
| 175 |
#endif |
| 176 |
#else |
| 177 |
#define MPT_SCSI_SG_DEPTH 40 |
| 178 |
#endif |
| 179 |
|
| 180 |
#ifdef CONFIG_FUSION_MAX_FC_SGE |
| 181 |
#if CONFIG_FUSION_MAX_FC_SGE < 16 |
| 182 |
#define MPT_SCSI_FC_SG_DEPTH 16 |
| 183 |
#elif CONFIG_FUSION_MAX_FC_SGE > 256 |
| 184 |
#define MPT_SCSI_FC_SG_DEPTH 256 |
| 185 |
#else |
| 186 |
#define MPT_SCSI_FC_SG_DEPTH CONFIG_FUSION_MAX_FC_SGE |
| 187 |
#endif |
| 188 |
#else |
| 189 |
#define MPT_SCSI_FC_SG_DEPTH 40 |
| 190 |
#endif |
| 191 |
|
| 192 |
/* debug print string length used for events and iocstatus */ |
| 193 |
# define EVENT_DESCR_STR_SZ 100 |
| 194 |
|
| 195 |
#define MPT_POLLING_INTERVAL 1000 /* in milliseconds */ |
| 196 |
|
| 197 |
#ifdef __KERNEL__ /* { */ |
| 198 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 199 |
|
| 200 |
#include <linux/proc_fs.h> |
| 201 |
|
| 202 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 203 |
/* |
| 204 |
* Attempt semi-consistent error & warning msgs across |
| 205 |
* MPT drivers. NOTE: Users of these macro defs must |
| 206 |
* themselves define their own MYNAM. |
| 207 |
*/ |
| 208 |
#define MYIOC_s_FMT MYNAM ": %s: " |
| 209 |
#define MYIOC_s_DEBUG_FMT KERN_DEBUG MYNAM ": %s: " |
| 210 |
#define MYIOC_s_INFO_FMT KERN_INFO MYNAM ": %s: " |
| 211 |
#define MYIOC_s_NOTE_FMT KERN_NOTICE MYNAM ": %s: " |
| 212 |
#define MYIOC_s_WARN_FMT KERN_WARNING MYNAM ": %s: WARNING - " |
| 213 |
#define MYIOC_s_ERR_FMT KERN_ERR MYNAM ": %s: ERROR - " |
| 214 |
|
| 215 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 216 |
/* |
| 217 |
* ATTO UL4D associated structures and defines |
| 218 |
*/ |
| 219 |
#define ATTOFLAG_DISC 0x0001 |
| 220 |
#define ATTOFLAG_TAGGED 0x0002 |
| 221 |
#define ATTOFLAG_WIDE_ENB 0x0008 |
| 222 |
#define ATTOFLAG_ID_ENB 0x0010 |
| 223 |
#define ATTOFLAG_LUN_ENB 0x0060 |
| 224 |
|
| 225 |
typedef struct _ATTO_DEVICE_INFO |
| 226 |
{ |
| 227 |
u8 Offset; /* 00h */ |
| 228 |
u8 Period; /* 01h */ |
| 229 |
u16 ATTOFlags; /* 02h */ |
| 230 |
} ATTO_DEVICE_INFO, MPI_POINTER PTR_ATTO_DEVICE_INFO, |
| 231 |
ATTODeviceInfo_t, MPI_POINTER pATTODeviceInfo_t; |
| 232 |
|
| 233 |
typedef struct _ATTO_CONFIG_PAGE_SCSI_PORT_2 |
| 234 |
{ |
| 235 |
CONFIG_PAGE_HEADER Header; /* 00h */ |
| 236 |
u16 PortFlags; /* 04h */ |
| 237 |
u16 Unused1; /* 06h */ |
| 238 |
u32 Unused2; /* 08h */ |
| 239 |
ATTO_DEVICE_INFO DeviceSettings[16]; /* 0Ch */ |
| 240 |
} fATTO_CONFIG_PAGE_SCSI_PORT_2, MPI_POINTER PTR_ATTO_CONFIG_PAGE_SCSI_PORT_2, |
| 241 |
ATTO_SCSIPortPage2_t, MPI_POINTER pATTO_SCSIPortPage2_t; |
| 242 |
|
| 243 |
|
| 244 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 245 |
/* |
| 246 |
* MPT protocol driver defs... |
| 247 |
*/ |
| 248 |
typedef enum { |
| 249 |
MPTBASE_DRIVER, /* MPT base class */ |
| 250 |
MPTCTL_DRIVER, /* MPT ioctl class */ |
| 251 |
MPTSPI_DRIVER, /* MPT SPI host class */ |
| 252 |
MPTFC_DRIVER, /* MPT FC host class */ |
| 253 |
MPTSAS_DRIVER, /* MPT SAS host class */ |
| 254 |
MPTLAN_DRIVER, /* MPT LAN class */ |
| 255 |
MPTSTM_DRIVER, /* MPT SCSI target mode class */ |
| 256 |
MPTUNKNOWN_DRIVER |
| 257 |
} MPT_DRIVER_CLASS; |
| 258 |
|
| 259 |
struct mpt_pci_driver{ |
| 260 |
int (*probe) (struct pci_dev *dev); |
| 261 |
void (*remove) (struct pci_dev *dev); |
| 262 |
}; |
| 263 |
|
| 264 |
/* |
| 265 |
* MPT adapter / port / bus / device info structures... |
| 266 |
*/ |
| 267 |
|
| 268 |
typedef union _MPT_FRAME_TRACKER { |
| 269 |
struct { |
| 270 |
struct list_head list; |
| 271 |
u32 arg1; |
| 272 |
u32 pad; |
| 273 |
void *argp1; |
| 274 |
} linkage; |
| 275 |
/* |
| 276 |
* NOTE: When request frames are free, on the linkage structure |
| 277 |
* contents are valid. All other values are invalid. |
| 278 |
* In particular, do NOT reply on offset [2] |
| 279 |
* (in words) being the * message context. |
| 280 |
* The message context must be reset (computed via base address |
| 281 |
* + an offset) prior to issuing any command. |
| 282 |
* |
| 283 |
* NOTE2: On non-32-bit systems, where pointers are LARGE, |
| 284 |
* using the linkage pointers destroys our sacred MsgContext |
| 285 |
* field contents. But we don't care anymore because these |
| 286 |
* are now reset in mpt_put_msg_frame() just prior to sending |
| 287 |
* a request off to the IOC. |
| 288 |
*/ |
| 289 |
struct { |
| 290 |
u32 __hdr[2]; |
| 291 |
/* |
| 292 |
* The following _MUST_ match the location of the |
| 293 |
* MsgContext field in the MPT message headers. |
| 294 |
*/ |
| 295 |
union { |
| 296 |
u32 MsgContext; |
| 297 |
struct { |
| 298 |
u16 req_idx; /* Request index */ |
| 299 |
u8 cb_idx; /* callback function index */ |
| 300 |
u8 rsvd; |
| 301 |
} fld; |
| 302 |
} msgctxu; |
| 303 |
} hwhdr; |
| 304 |
/* |
| 305 |
* Remark: 32 bit identifier: |
| 306 |
* 31-24: reserved |
| 307 |
* 23-16: call back index |
| 308 |
* 15-0 : request index |
| 309 |
*/ |
| 310 |
} MPT_FRAME_TRACKER; |
| 311 |
|
| 312 |
/* |
| 313 |
* We might want to view/access a frame as: |
| 314 |
* 1) generic request header |
| 315 |
* 2) SCSIIORequest |
| 316 |
* 3) SCSIIOReply |
| 317 |
* 4) MPIDefaultReply |
| 318 |
* 5) frame tracker |
| 319 |
*/ |
| 320 |
typedef struct _MPT_FRAME_HDR { |
| 321 |
union { |
| 322 |
MPIHeader_t hdr; |
| 323 |
SCSIIORequest_t scsireq; |
| 324 |
SCSIIOReply_t sreply; |
| 325 |
ConfigReply_t configreply; |
| 326 |
MPIDefaultReply_t reply; |
| 327 |
MPT_FRAME_TRACKER frame; |
| 328 |
} u; |
| 329 |
} MPT_FRAME_HDR; |
| 330 |
|
| 331 |
#define MPT_REQ_MSGFLAGS_DROPME 0x80 |
| 332 |
|
| 333 |
typedef struct _MPT_SGL_HDR { |
| 334 |
SGESimple32_t sge[1]; |
| 335 |
} MPT_SGL_HDR; |
| 336 |
|
| 337 |
typedef struct _MPT_SGL64_HDR { |
| 338 |
SGESimple64_t sge[1]; |
| 339 |
} MPT_SGL64_HDR; |
| 340 |
|
| 341 |
/* |
| 342 |
* System interface register set |
| 343 |
*/ |
| 344 |
|
| 345 |
typedef struct _SYSIF_REGS |
| 346 |
{ |
| 347 |
u32 Doorbell; /* 00 System<->IOC Doorbell reg */ |
| 348 |
u32 WriteSequence; /* 04 Write Sequence register */ |
| 349 |
u32 Diagnostic; /* 08 Diagnostic register */ |
| 350 |
u32 TestBase; /* 0C Test Base Address */ |
| 351 |
u32 DiagRwData; /* 10 Read Write Data (fw download) */ |
| 352 |
u32 DiagRwAddress; /* 14 Read Write Address (fw download)*/ |
| 353 |
u32 Reserved1[6]; /* 18-2F reserved for future use */ |
| 354 |
u32 IntStatus; /* 30 Interrupt Status */ |
| 355 |
u32 IntMask; /* 34 Interrupt Mask */ |
| 356 |
u32 Reserved2[2]; /* 38-3F reserved for future use */ |
| 357 |
u32 RequestFifo; /* 40 Request Post/Free FIFO */ |
| 358 |
u32 ReplyFifo; /* 44 Reply Post/Free FIFO */ |
| 359 |
u32 RequestHiPriFifo; /* 48 Hi Priority Request FIFO */ |
| 360 |
u32 Reserved3; /* 4C-4F reserved for future use */ |
| 361 |
u32 HostIndex; /* 50 Host Index register */ |
| 362 |
u32 Reserved4[15]; /* 54-8F */ |
| 363 |
u32 Fubar; /* 90 For Fubar usage */ |
| 364 |
u32 Reserved5[1050];/* 94-10F8 */ |
| 365 |
u32 Reset_1078; /* 10FC Reset 1078 */ |
| 366 |
} SYSIF_REGS; |
| 367 |
|
| 368 |
/* |
| 369 |
* NOTE: Use MPI_{DOORBELL,WRITESEQ,DIAG}_xxx defs in lsi/mpi.h |
| 370 |
* in conjunction with SYSIF_REGS accesses! |
| 371 |
*/ |
| 372 |
|
| 373 |
|
| 374 |
/* |
| 375 |
* Dynamic Multi-Pathing specific stuff... |
| 376 |
*/ |
| 377 |
|
| 378 |
/* VirtTarget negoFlags field */ |
| 379 |
#define MPT_TARGET_NO_NEGO_WIDE 0x01 |
| 380 |
#define MPT_TARGET_NO_NEGO_SYNC 0x02 |
| 381 |
#define MPT_TARGET_NO_NEGO_QAS 0x04 |
| 382 |
#define MPT_TAPE_NEGO_IDP 0x08 |
| 383 |
|
| 384 |
/* |
| 385 |
* VirtDevice - FC LUN device or SCSI target device |
| 386 |
*/ |
| 387 |
typedef struct _VirtTarget { |
| 388 |
struct scsi_target *starget; |
| 389 |
u8 tflags; |
| 390 |
u8 ioc_id; |
| 391 |
u8 id; |
| 392 |
u8 channel; |
| 393 |
u8 minSyncFactor; /* 0xFF is async */ |
| 394 |
u8 maxOffset; /* 0 if async */ |
| 395 |
u8 maxWidth; /* 0 if narrow, 1 if wide */ |
| 396 |
u8 negoFlags; /* bit field, see above */ |
| 397 |
u8 raidVolume; /* set, if RAID Volume */ |
| 398 |
u8 type; /* byte 0 of Inquiry data */ |
| 399 |
u8 deleted; /* target in process of being removed */ |
| 400 |
u8 inDMD; /* currently in the device |
| 401 |
removal delay timer */ |
| 402 |
u32 num_luns; |
| 403 |
} VirtTarget; |
| 404 |
|
| 405 |
typedef struct _VirtDevice { |
| 406 |
VirtTarget *vtarget; |
| 407 |
u8 configured_lun; |
| 408 |
u64 lun; |
| 409 |
} VirtDevice; |
| 410 |
|
| 411 |
/* |
| 412 |
* Fibre Channel (SCSI) target device and associated defines... |
| 413 |
*/ |
| 414 |
#define MPT_TARGET_DEFAULT_DV_STATUS 0x00 |
| 415 |
#define MPT_TARGET_FLAGS_VALID_NEGO 0x01 |
| 416 |
#define MPT_TARGET_FLAGS_VALID_INQUIRY 0x02 |
| 417 |
#define MPT_TARGET_FLAGS_Q_YES 0x08 |
| 418 |
#define MPT_TARGET_FLAGS_VALID_56 0x10 |
| 419 |
#define MPT_TARGET_FLAGS_SAF_TE_ISSUED 0x20 |
| 420 |
#define MPT_TARGET_FLAGS_RAID_COMPONENT 0x40 |
| 421 |
#define MPT_TARGET_FLAGS_LED_ON 0x80 |
| 422 |
|
| 423 |
/* |
| 424 |
* IOCTL structure and associated defines |
| 425 |
*/ |
| 426 |
|
| 427 |
#define MPTCTL_RESET_OK 0x01 /* Issue Bus Reset */ |
| 428 |
|
| 429 |
#define MPT_MGMT_STATUS_RF_VALID 0x01 /* The Reply Frame is VALID */ |
| 430 |
#define MPT_MGMT_STATUS_COMMAND_GOOD 0x02 /* Command Status GOOD */ |
| 431 |
#define MPT_MGMT_STATUS_PENDING 0x04 /* command is pending */ |
| 432 |
#define MPT_MGMT_STATUS_DID_IOCRESET 0x08 /* IOC Reset occurred |
| 433 |
on the current*/ |
| 434 |
#define MPT_MGMT_STATUS_SENSE_VALID 0x10 /* valid sense info */ |
| 435 |
#define MPT_MGMT_STATUS_TIMER_ACTIVE 0x20 /* obsolete */ |
| 436 |
#define MPT_MGMT_STATUS_FREE_MF 0x40 /* free the mf from |
| 437 |
complete routine */ |
| 438 |
|
| 439 |
#define INITIALIZE_MGMT_STATUS(status) \ |
| 440 |
status = MPT_MGMT_STATUS_PENDING; |
| 441 |
#define CLEAR_MGMT_STATUS(status) \ |
| 442 |
status = 0; |
| 443 |
#define CLEAR_MGMT_PENDING_STATUS(status) \ |
| 444 |
status &= ~MPT_MGMT_STATUS_PENDING; |
| 445 |
#define SET_MGMT_MSG_CONTEXT(msg_context, value) \ |
| 446 |
msg_context = value; |
| 447 |
|
| 448 |
typedef struct _MPT_MGMT { |
| 449 |
struct mutex mutex; |
| 450 |
struct completion done; |
| 451 |
u8 reply[MPT_DEFAULT_FRAME_SIZE]; /* reply frame data */ |
| 452 |
u8 sense[MPT_SENSE_BUFFER_ALLOC]; |
| 453 |
u8 status; /* current command status */ |
| 454 |
int completion_code; |
| 455 |
u32 msg_context; |
| 456 |
} MPT_MGMT; |
| 457 |
|
| 458 |
/* |
| 459 |
* Event Structure and define |
| 460 |
*/ |
| 461 |
#define MPTCTL_EVENT_LOG_SIZE (0x000000032) |
| 462 |
typedef struct _mpt_ioctl_events { |
| 463 |
u32 event; /* Specified by define above */ |
| 464 |
u32 eventContext; /* Index or counter */ |
| 465 |
u32 data[2]; /* First 8 bytes of Event Data */ |
| 466 |
} MPT_IOCTL_EVENTS; |
| 467 |
|
| 468 |
/* |
| 469 |
* CONFIGPARM status defines |
| 470 |
*/ |
| 471 |
#define MPT_CONFIG_GOOD MPI_IOCSTATUS_SUCCESS |
| 472 |
#define MPT_CONFIG_ERROR 0x002F |
| 473 |
|
| 474 |
/* |
| 475 |
* Substructure to store SCSI specific configuration page data |
| 476 |
*/ |
| 477 |
/* dvStatus defines: */ |
| 478 |
#define MPT_SCSICFG_USE_NVRAM 0x01 /* WriteSDP1 using NVRAM */ |
| 479 |
#define MPT_SCSICFG_ALL_IDS 0x02 /* WriteSDP1 to all IDS */ |
| 480 |
/* #define MPT_SCSICFG_BLK_NEGO 0x10 WriteSDP1 with WDTR and SDTR disabled */ |
| 481 |
|
| 482 |
typedef struct _SpiCfgData { |
| 483 |
u32 PortFlags; |
| 484 |
int *nvram; /* table of device NVRAM values */ |
| 485 |
IOCPage4_t *pIocPg4; /* SEP devices addressing */ |
| 486 |
dma_addr_t IocPg4_dma; /* Phys Addr of IOCPage4 data */ |
| 487 |
int IocPg4Sz; /* IOCPage4 size */ |
| 488 |
u8 minSyncFactor; /* 0xFF if async */ |
| 489 |
u8 maxSyncOffset; /* 0 if async */ |
| 490 |
u8 maxBusWidth; /* 0 if narrow, 1 if wide */ |
| 491 |
u8 busType; /* SE, LVD, HD */ |
| 492 |
u8 sdp1version; /* SDP1 version */ |
| 493 |
u8 sdp1length; /* SDP1 length */ |
| 494 |
u8 sdp0version; /* SDP0 version */ |
| 495 |
u8 sdp0length; /* SDP0 length */ |
| 496 |
u8 dvScheduled; /* 1 if scheduled */ |
| 497 |
u8 noQas; /* Disable QAS for this adapter */ |
| 498 |
u8 Saf_Te; /* 1 to force all Processors as |
| 499 |
* SAF-TE if Inquiry data length |
| 500 |
* is too short to check for SAF-TE |
| 501 |
*/ |
| 502 |
u8 bus_reset; /* 1 to allow bus reset */ |
| 503 |
u8 rsvd[1]; |
| 504 |
}SpiCfgData; |
| 505 |
|
| 506 |
typedef struct _SasCfgData { |
| 507 |
u8 ptClear; /* 1 to automatically clear the |
| 508 |
* persistent table. |
| 509 |
* 0 to disable |
| 510 |
* automatic clearing. |
| 511 |
*/ |
| 512 |
}SasCfgData; |
| 513 |
|
| 514 |
/* |
| 515 |
* Inactive volume link list of raid component data |
| 516 |
* @inactive_list |
| 517 |
*/ |
| 518 |
struct inactive_raid_component_info { |
| 519 |
struct list_head list; |
| 520 |
u8 volumeID; /* volume target id */ |
| 521 |
u8 volumeBus; /* volume channel */ |
| 522 |
IOC_3_PHYS_DISK d; /* phys disk info */ |
| 523 |
}; |
| 524 |
|
| 525 |
typedef struct _RaidCfgData { |
| 526 |
IOCPage2_t *pIocPg2; /* table of Raid Volumes */ |
| 527 |
IOCPage3_t *pIocPg3; /* table of physical disks */ |
| 528 |
struct mutex inactive_list_mutex; |
| 529 |
struct list_head inactive_list; /* link list for physical |
| 530 |
disk that belong in |
| 531 |
inactive volumes */ |
| 532 |
}RaidCfgData; |
| 533 |
|
| 534 |
typedef struct _FcCfgData { |
| 535 |
/* will ultimately hold fc_port_page0 also */ |
| 536 |
struct { |
| 537 |
FCPortPage1_t *data; |
| 538 |
dma_addr_t dma; |
| 539 |
int pg_sz; |
| 540 |
} fc_port_page1[2]; |
| 541 |
} FcCfgData; |
| 542 |
|
| 543 |
#define MPT_RPORT_INFO_FLAGS_REGISTERED 0x01 /* rport registered */ |
| 544 |
#define MPT_RPORT_INFO_FLAGS_MISSING 0x02 /* missing from DevPage0 scan */ |
| 545 |
|
| 546 |
/* |
| 547 |
* data allocated for each fc rport device |
| 548 |
*/ |
| 549 |
struct mptfc_rport_info |
| 550 |
{ |
| 551 |
struct list_head list; |
| 552 |
struct fc_rport *rport; |
| 553 |
struct scsi_target *starget; |
| 554 |
FCDevicePage0_t pg0; |
| 555 |
u8 flags; |
| 556 |
}; |
| 557 |
|
| 558 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 559 |
|
| 560 |
/* |
| 561 |
* MPT_SCSI_HOST defines - Used by the IOCTL and the SCSI drivers |
| 562 |
* Private to the driver. |
| 563 |
*/ |
| 564 |
|
| 565 |
#define MPT_HOST_BUS_UNKNOWN (0xFF) |
| 566 |
#define MPT_HOST_TOO_MANY_TM (0x05) |
| 567 |
#define MPT_HOST_NVRAM_INVALID (0xFFFFFFFF) |
| 568 |
#define MPT_HOST_NO_CHAIN (0xFFFFFFFF) |
| 569 |
#define MPT_NVRAM_MASK_TIMEOUT (0x000000FF) |
| 570 |
#define MPT_NVRAM_SYNC_MASK (0x0000FF00) |
| 571 |
#define MPT_NVRAM_SYNC_SHIFT (8) |
| 572 |
#define MPT_NVRAM_DISCONNECT_ENABLE (0x00010000) |
| 573 |
#define MPT_NVRAM_ID_SCAN_ENABLE (0x00020000) |
| 574 |
#define MPT_NVRAM_LUN_SCAN_ENABLE (0x00040000) |
| 575 |
#define MPT_NVRAM_TAG_QUEUE_ENABLE (0x00080000) |
| 576 |
#define MPT_NVRAM_WIDE_DISABLE (0x00100000) |
| 577 |
#define MPT_NVRAM_BOOT_CHOICE (0x00200000) |
| 578 |
|
| 579 |
typedef enum { |
| 580 |
FC, |
| 581 |
SPI, |
| 582 |
SAS |
| 583 |
} BUS_TYPE; |
| 584 |
|
| 585 |
typedef struct _MPT_SCSI_HOST { |
| 586 |
struct _MPT_ADAPTER *ioc; |
| 587 |
ushort sel_timeout[MPT_MAX_FC_DEVICES]; |
| 588 |
char *info_kbuf; |
| 589 |
long last_queue_full; |
| 590 |
u16 spi_pending; |
| 591 |
struct list_head target_reset_list; |
| 592 |
} MPT_SCSI_HOST; |
| 593 |
|
| 594 |
typedef void (*MPT_ADD_SGE)(void *pAddr, u32 flagslength, dma_addr_t dma_addr); |
| 595 |
typedef void (*MPT_ADD_CHAIN)(void *pAddr, u8 next, u16 length, |
| 596 |
dma_addr_t dma_addr); |
| 597 |
typedef void (*MPT_SCHEDULE_TARGET_RESET)(void *ioc); |
| 598 |
typedef void (*MPT_FLUSH_RUNNING_CMDS)(MPT_SCSI_HOST *hd); |
| 599 |
|
| 600 |
/* |
| 601 |
* Adapter Structure - pci_dev specific. Maximum: MPT_MAX_ADAPTERS |
| 602 |
*/ |
| 603 |
typedef struct _MPT_ADAPTER |
| 604 |
{ |
| 605 |
int id; /* Unique adapter id N {0,1,2,...} */ |
| 606 |
int pci_irq; /* This irq */ |
| 607 |
char name[MPT_NAME_LENGTH]; /* "iocN" */ |
| 608 |
const char *prod_name; /* "LSIFC9x9" */ |
| 609 |
#ifdef CONFIG_FUSION_LOGGING |
| 610 |
/* used in mpt_display_event_info */ |
| 611 |
char evStr[EVENT_DESCR_STR_SZ]; |
| 612 |
#endif |
| 613 |
char board_name[16]; |
| 614 |
char board_assembly[16]; |
| 615 |
char board_tracer[16]; |
| 616 |
u16 nvdata_version_persistent; |
| 617 |
u16 nvdata_version_default; |
| 618 |
int debug_level; |
| 619 |
u8 io_missing_delay; |
| 620 |
u16 device_missing_delay; |
| 621 |
SYSIF_REGS __iomem *chip; /* == c8817000 (mmap) */ |
| 622 |
SYSIF_REGS __iomem *pio_chip; /* Programmed IO (downloadboot) */ |
| 623 |
u8 bus_type; |
| 624 |
u32 mem_phys; /* == f4020000 (mmap) */ |
| 625 |
u32 pio_mem_phys; /* Programmed IO (downloadboot) */ |
| 626 |
int mem_size; /* mmap memory size */ |
| 627 |
int number_of_buses; |
| 628 |
int devices_per_bus; |
| 629 |
int alloc_total; |
| 630 |
u32 last_state; |
| 631 |
int active; |
| 632 |
u8 *alloc; /* frames alloc ptr */ |
| 633 |
dma_addr_t alloc_dma; |
| 634 |
u32 alloc_sz; |
| 635 |
MPT_FRAME_HDR *reply_frames; /* Reply msg frames - rounded up! */ |
| 636 |
u32 reply_frames_low_dma; |
| 637 |
int reply_depth; /* Num Allocated reply frames */ |
| 638 |
int reply_sz; /* Reply frame size */ |
| 639 |
int num_chain; /* Number of chain buffers */ |
| 640 |
MPT_ADD_SGE add_sge; /* Pointer to add_sge |
| 641 |
function */ |
| 642 |
MPT_ADD_CHAIN add_chain; /* Pointer to add_chain |
| 643 |
function */ |
| 644 |
/* Pool of buffers for chaining. ReqToChain |
| 645 |
* and ChainToChain track index of chain buffers. |
| 646 |
* ChainBuffer (DMA) virt/phys addresses. |
| 647 |
* FreeChainQ (lock) locking mechanisms. |
| 648 |
*/ |
| 649 |
int *ReqToChain; |
| 650 |
int *RequestNB; |
| 651 |
int *ChainToChain; |
| 652 |
u8 *ChainBuffer; |
| 653 |
dma_addr_t ChainBufferDMA; |
| 654 |
struct list_head FreeChainQ; |
| 655 |
spinlock_t FreeChainQlock; |
| 656 |
/* We (host driver) get to manage our own RequestQueue! */ |
| 657 |
dma_addr_t req_frames_dma; |
| 658 |
MPT_FRAME_HDR *req_frames; /* Request msg frames - rounded up! */ |
| 659 |
u32 req_frames_low_dma; |
| 660 |
int req_depth; /* Number of request frames */ |
| 661 |
int req_sz; /* Request frame size (bytes) */ |
| 662 |
spinlock_t FreeQlock; |
| 663 |
struct list_head FreeQ; |
| 664 |
/* Pool of SCSI sense buffers for commands coming from |
| 665 |
* the SCSI mid-layer. We have one 256 byte sense buffer |
| 666 |
* for each REQ entry. |
| 667 |
*/ |
| 668 |
u8 *sense_buf_pool; |
| 669 |
dma_addr_t sense_buf_pool_dma; |
| 670 |
u32 sense_buf_low_dma; |
| 671 |
u8 *HostPageBuffer; /* SAS - host page buffer support */ |
| 672 |
u32 HostPageBuffer_sz; |
| 673 |
dma_addr_t HostPageBuffer_dma; |
| 674 |
struct pci_dev *pcidev; /* struct pci_dev pointer */ |
| 675 |
int bars; /* bitmask of BAR's that must be configured */ |
| 676 |
int msi_enable; |
| 677 |
u8 __iomem *memmap; /* mmap address */ |
| 678 |
struct Scsi_Host *sh; /* Scsi Host pointer */ |
| 679 |
SpiCfgData spi_data; /* Scsi config. data */ |
| 680 |
RaidCfgData raid_data; /* Raid config. data */ |
| 681 |
SasCfgData sas_data; /* Sas config. data */ |
| 682 |
FcCfgData fc_data; /* Fc config. data */ |
| 683 |
struct proc_dir_entry *ioc_dentry; |
| 684 |
struct _MPT_ADAPTER *alt_ioc; /* ptr to 929 bound adapter port */ |
| 685 |
u32 biosVersion; /* BIOS version from IO Unit Page 2 */ |
| 686 |
int eventTypes; /* Event logging parameters */ |
| 687 |
int eventContext; /* Next event context */ |
| 688 |
int eventLogSize; /* Max number of cached events */ |
| 689 |
struct _mpt_ioctl_events *events; /* pointer to event log */ |
| 690 |
u8 *cached_fw; /* Pointer to FW */ |
| 691 |
dma_addr_t cached_fw_dma; |
| 692 |
int hs_reply_idx; |
| 693 |
#ifndef MFCNT |
| 694 |
u32 pad0; |
| 695 |
#else |
| 696 |
u32 mfcnt; |
| 697 |
#endif |
| 698 |
u32 NB_for_64_byte_frame; |
| 699 |
u32 hs_req[MPT_MAX_FRAME_SIZE/sizeof(u32)]; |
| 700 |
u16 hs_reply[MPT_MAX_FRAME_SIZE/sizeof(u16)]; |
| 701 |
IOCFactsReply_t facts; |
| 702 |
PortFactsReply_t pfacts[2]; |
| 703 |
FCPortPage0_t fc_port_page0[2]; |
| 704 |
LANPage0_t lan_cnfg_page0; |
| 705 |
LANPage1_t lan_cnfg_page1; |
| 706 |
|
| 707 |
u8 ir_firmware; /* =1 if IR firmware detected */ |
| 708 |
/* |
| 709 |
* Description: errata_flag_1064 |
| 710 |
* If a PCIX read occurs within 1 or 2 cycles after the chip receives |
| 711 |
* a split completion for a read data, an internal address pointer incorrectly |
| 712 |
* increments by 32 bytes |
| 713 |
*/ |
| 714 |
int errata_flag_1064; |
| 715 |
int aen_event_read_flag; /* flag to indicate event log was read*/ |
| 716 |
u8 FirstWhoInit; |
| 717 |
u8 upload_fw; /* If set, do a fw upload */ |
| 718 |
u8 NBShiftFactor; /* NB Shift Factor based on Block Size (Facts) */ |
| 719 |
u8 pad1[4]; |
| 720 |
u8 DoneCtx; |
| 721 |
u8 TaskCtx; |
| 722 |
u8 InternalCtx; |
| 723 |
struct list_head list; |
| 724 |
struct net_device *netdev; |
| 725 |
struct list_head sas_topology; |
| 726 |
struct mutex sas_topology_mutex; |
| 727 |
|
| 728 |
struct workqueue_struct *fw_event_q; |
| 729 |
struct list_head fw_event_list; |
| 730 |
spinlock_t fw_event_lock; |
| 731 |
u8 fw_events_off; /* if '1', then ignore events */ |
| 732 |
|
| 733 |
struct mutex sas_discovery_mutex; |
| 734 |
u8 sas_discovery_runtime; |
| 735 |
u8 sas_discovery_ignore_events; |
| 736 |
|
| 737 |
/* port_info object for the host */ |
| 738 |
struct mptsas_portinfo *hba_port_info; |
| 739 |
u64 hba_port_sas_addr; |
| 740 |
u16 hba_port_num_phy; |
| 741 |
struct list_head sas_device_info_list; |
| 742 |
struct mutex sas_device_info_mutex; |
| 743 |
u8 old_sas_discovery_protocal; |
| 744 |
u8 sas_discovery_quiesce_io; |
| 745 |
int sas_index; /* index refrencing */ |
| 746 |
MPT_MGMT sas_mgmt; |
| 747 |
MPT_MGMT mptbase_cmds; /* for sending config pages */ |
| 748 |
MPT_MGMT internal_cmds; |
| 749 |
MPT_MGMT taskmgmt_cmds; |
| 750 |
MPT_MGMT ioctl_cmds; |
| 751 |
spinlock_t taskmgmt_lock; /* diagnostic reset lock */ |
| 752 |
int taskmgmt_in_progress; |
| 753 |
u8 taskmgmt_quiesce_io; |
| 754 |
u8 ioc_reset_in_progress; |
| 755 |
u8 reset_status; |
| 756 |
u8 wait_on_reset_completion; |
| 757 |
MPT_SCHEDULE_TARGET_RESET schedule_target_reset; |
| 758 |
MPT_FLUSH_RUNNING_CMDS schedule_dead_ioc_flush_running_cmds; |
| 759 |
|
| 760 |
struct work_struct fc_setup_reset_work; |
| 761 |
struct list_head fc_rports; |
| 762 |
struct work_struct fc_lsc_work; |
| 763 |
u8 fc_link_speed[2]; |
| 764 |
spinlock_t fc_rescan_work_lock; |
| 765 |
struct work_struct fc_rescan_work; |
| 766 |
struct workqueue_struct *fc_rescan_work_q; |
| 767 |
|
| 768 |
/* driver forced bus resets count */ |
| 769 |
unsigned long hard_resets; |
| 770 |
/* fw/external bus resets count */ |
| 771 |
unsigned long soft_resets; |
| 772 |
/* cmd timeouts */ |
| 773 |
unsigned long timeouts; |
| 774 |
|
| 775 |
struct scsi_cmnd **ScsiLookup; |
| 776 |
spinlock_t scsi_lookup_lock; |
| 777 |
u64 dma_mask; |
| 778 |
u32 broadcast_aen_busy; |
| 779 |
struct workqueue_struct *reset_work_q; |
| 780 |
struct delayed_work fault_reset_work; |
| 781 |
|
| 782 |
u8 sg_addr_size; |
| 783 |
u8 in_rescan; |
| 784 |
u8 SGE_size; |
| 785 |
|
| 786 |
} MPT_ADAPTER; |
| 787 |
|
| 788 |
/* |
| 789 |
* New return value convention: |
| 790 |
* 1 = Ok to free associated request frame |
| 791 |
* 0 = not Ok ... |
| 792 |
*/ |
| 793 |
typedef int (*MPT_CALLBACK)(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply); |
| 794 |
typedef int (*MPT_EVHANDLER)(MPT_ADAPTER *ioc, EventNotificationReply_t *evReply); |
| 795 |
typedef int (*MPT_RESETHANDLER)(MPT_ADAPTER *ioc, int reset_phase); |
| 796 |
/* reset_phase defs */ |
| 797 |
#define MPT_IOC_PRE_RESET 0 |
| 798 |
#define MPT_IOC_POST_RESET 1 |
| 799 |
#define MPT_IOC_SETUP_RESET 2 |
| 800 |
|
| 801 |
/* |
| 802 |
* Invent MPT host event (super-set of MPI Events) |
| 803 |
* Fitted to 1030's 64-byte [max] request frame size |
| 804 |
*/ |
| 805 |
typedef struct _MPT_HOST_EVENT { |
| 806 |
EventNotificationReply_t MpiEvent; /* 8 32-bit words! */ |
| 807 |
u32 pad[6]; |
| 808 |
void *next; |
| 809 |
} MPT_HOST_EVENT; |
| 810 |
|
| 811 |
#define MPT_HOSTEVENT_IOC_BRINGUP 0x91 |
| 812 |
#define MPT_HOSTEVENT_IOC_RECOVER 0x92 |
| 813 |
|
| 814 |
/* Define the generic types based on the size |
| 815 |
* of the dma_addr_t type. |
| 816 |
*/ |
| 817 |
typedef struct _mpt_sge { |
| 818 |
u32 FlagsLength; |
| 819 |
dma_addr_t Address; |
| 820 |
} MptSge_t; |
| 821 |
|
| 822 |
|
| 823 |
#define mpt_msg_flags(ioc) \ |
| 824 |
(ioc->sg_addr_size == sizeof(u64)) ? \ |
| 825 |
MPI_SCSIIO_MSGFLGS_SENSE_WIDTH_64 : \ |
| 826 |
MPI_SCSIIO_MSGFLGS_SENSE_WIDTH_32 |
| 827 |
|
| 828 |
#define MPT_SGE_FLAGS_64_BIT_ADDRESSING \ |
| 829 |
(MPI_SGE_FLAGS_64_BIT_ADDRESSING << MPI_SGE_FLAGS_SHIFT) |
| 830 |
|
| 831 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 832 |
/* |
| 833 |
* Funky (private) macros... |
| 834 |
*/ |
| 835 |
#include "mptdebug.h" |
| 836 |
|
| 837 |
#define MPT_INDEX_2_MFPTR(ioc,idx) \ |
| 838 |
(MPT_FRAME_HDR*)( (u8*)(ioc)->req_frames + (ioc)->req_sz * (idx) ) |
| 839 |
|
| 840 |
#define MFPTR_2_MPT_INDEX(ioc,mf) \ |
| 841 |
(int)( ((u8*)mf - (u8*)(ioc)->req_frames) / (ioc)->req_sz ) |
| 842 |
|
| 843 |
#define MPT_INDEX_2_RFPTR(ioc,idx) \ |
| 844 |
(MPT_FRAME_HDR*)( (u8*)(ioc)->reply_frames + (ioc)->req_sz * (idx) ) |
| 845 |
|
| 846 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 847 |
|
| 848 |
#define SCSI_STD_SENSE_BYTES 18 |
| 849 |
#define SCSI_STD_INQUIRY_BYTES 36 |
| 850 |
#define SCSI_MAX_INQUIRY_BYTES 96 |
| 851 |
|
| 852 |
/* |
| 853 |
* MPT_SCSI_HOST defines - Used by the IOCTL and the SCSI drivers |
| 854 |
* Private to the driver. |
| 855 |
*/ |
| 856 |
/* LOCAL structure and fields used when processing |
| 857 |
* internally generated commands. These include: |
| 858 |
* bus scan, dv and config requests. |
| 859 |
*/ |
| 860 |
typedef struct _MPT_LOCAL_REPLY { |
| 861 |
ConfigPageHeader_t header; |
| 862 |
int completion; |
| 863 |
u8 sense[SCSI_STD_SENSE_BYTES]; |
| 864 |
u8 scsiStatus; |
| 865 |
u8 skip; |
| 866 |
u32 pad; |
| 867 |
} MPT_LOCAL_REPLY; |
| 868 |
|
| 869 |
|
| 870 |
/* The TM_STATE variable is used to provide strict single threading of TM |
| 871 |
* requests as well as communicate TM error conditions. |
| 872 |
*/ |
| 873 |
#define TM_STATE_NONE (0) |
| 874 |
#define TM_STATE_IN_PROGRESS (1) |
| 875 |
#define TM_STATE_ERROR (2) |
| 876 |
|
| 877 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 878 |
/* |
| 879 |
* More Dynamic Multi-Pathing stuff... |
| 880 |
*/ |
| 881 |
|
| 882 |
/* Forward decl, a strange C thing, to prevent gcc compiler warnings */ |
| 883 |
struct scsi_cmnd; |
| 884 |
|
| 885 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 886 |
/* |
| 887 |
* Generic structure passed to the base mpt_config function. |
| 888 |
*/ |
| 889 |
typedef struct _x_config_parms { |
| 890 |
union { |
| 891 |
ConfigExtendedPageHeader_t *ehdr; |
| 892 |
ConfigPageHeader_t *hdr; |
| 893 |
} cfghdr; |
| 894 |
dma_addr_t physAddr; |
| 895 |
u32 pageAddr; /* properly formatted */ |
| 896 |
u16 status; |
| 897 |
u8 action; |
| 898 |
u8 dir; |
| 899 |
u8 timeout; /* seconds */ |
| 900 |
} CONFIGPARMS; |
| 901 |
|
| 902 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 903 |
/* |
| 904 |
* Public entry points... |
| 905 |
*/ |
| 906 |
extern int mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id); |
| 907 |
extern void mpt_detach(struct pci_dev *pdev); |
| 908 |
#ifdef CONFIG_PM |
| 909 |
extern int mpt_suspend(struct pci_dev *pdev, pm_message_t state); |
| 910 |
extern int mpt_resume(struct pci_dev *pdev); |
| 911 |
#endif |
| 912 |
extern u8 mpt_register(MPT_CALLBACK cbfunc, MPT_DRIVER_CLASS dclass, |
| 913 |
char *func_name); |
| 914 |
extern void mpt_deregister(u8 cb_idx); |
| 915 |
extern int mpt_event_register(u8 cb_idx, MPT_EVHANDLER ev_cbfunc); |
| 916 |
extern void mpt_event_deregister(u8 cb_idx); |
| 917 |
extern int mpt_reset_register(u8 cb_idx, MPT_RESETHANDLER reset_func); |
| 918 |
extern void mpt_reset_deregister(u8 cb_idx); |
| 919 |
extern int mpt_device_driver_register(struct mpt_pci_driver * dd_cbfunc, u8 cb_idx); |
| 920 |
extern void mpt_device_driver_deregister(u8 cb_idx); |
| 921 |
extern MPT_FRAME_HDR *mpt_get_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc); |
| 922 |
extern void mpt_free_msg_frame(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf); |
| 923 |
extern void mpt_put_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf); |
| 924 |
extern void mpt_put_msg_frame_hi_pri(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf); |
| 925 |
|
| 926 |
extern int mpt_send_handshake_request(u8 cb_idx, MPT_ADAPTER *ioc, int reqBytes, u32 *req, int sleepFlag); |
| 927 |
extern int mpt_verify_adapter(int iocid, MPT_ADAPTER **iocpp); |
| 928 |
extern u32 mpt_GetIocState(MPT_ADAPTER *ioc, int cooked); |
| 929 |
extern void mpt_print_ioc_summary(MPT_ADAPTER *ioc, char *buf, int *size, int len, int showlan); |
| 930 |
extern int mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag); |
| 931 |
extern int mpt_Soft_Hard_ResetHandler(MPT_ADAPTER *ioc, int sleepFlag); |
| 932 |
extern int mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *cfg); |
| 933 |
extern int mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size); |
| 934 |
extern void mpt_free_fw_memory(MPT_ADAPTER *ioc); |
| 935 |
extern int mpt_findImVolumes(MPT_ADAPTER *ioc); |
| 936 |
extern int mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode); |
| 937 |
extern int mpt_raid_phys_disk_pg0(MPT_ADAPTER *ioc, u8 phys_disk_num, pRaidPhysDiskPage0_t phys_disk); |
| 938 |
extern int mpt_raid_phys_disk_pg1(MPT_ADAPTER *ioc, u8 phys_disk_num, |
| 939 |
pRaidPhysDiskPage1_t phys_disk); |
| 940 |
extern int mpt_raid_phys_disk_get_num_paths(MPT_ADAPTER *ioc, |
| 941 |
u8 phys_disk_num); |
| 942 |
extern int mpt_set_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc); |
| 943 |
extern void mpt_clear_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc); |
| 944 |
extern void __noreturn mpt_halt_firmware(MPT_ADAPTER *ioc); |
| 945 |
|
| 946 |
|
| 947 |
/* |
| 948 |
* Public data decl's... |
| 949 |
*/ |
| 950 |
extern struct list_head ioc_list; |
| 951 |
extern int mpt_fwfault_debug; |
| 952 |
|
| 953 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 954 |
#endif /* } __KERNEL__ */ |
| 955 |
|
| 956 |
#ifdef CONFIG_64BIT |
| 957 |
#define CAST_U32_TO_PTR(x) ((void *)(u64)x) |
| 958 |
#define CAST_PTR_TO_U32(x) ((u32)(u64)x) |
| 959 |
#else |
| 960 |
#define CAST_U32_TO_PTR(x) ((void *)x) |
| 961 |
#define CAST_PTR_TO_U32(x) ((u32)x) |
| 962 |
#endif |
| 963 |
|
| 964 |
#define MPT_PROTOCOL_FLAGS_c_c_c_c(pflags) \ |
| 965 |
((pflags) & MPI_PORTFACTS_PROTOCOL_INITIATOR) ? 'I' : 'i', \ |
| 966 |
((pflags) & MPI_PORTFACTS_PROTOCOL_TARGET) ? 'T' : 't', \ |
| 967 |
((pflags) & MPI_PORTFACTS_PROTOCOL_LAN) ? 'L' : 'l', \ |
| 968 |
((pflags) & MPI_PORTFACTS_PROTOCOL_LOGBUSADDR) ? 'B' : 'b' |
| 969 |
|
| 970 |
/* |
| 971 |
* Shifted SGE Defines - Use in SGE with FlagsLength member. |
| 972 |
* Otherwise, use MPI_xxx defines (refer to "lsi/mpi.h" header). |
| 973 |
* Defaults: 32 bit SGE, SYSTEM_ADDRESS if direction bit is 0, read |
| 974 |
*/ |
| 975 |
#define MPT_TRANSFER_IOC_TO_HOST (0x00000000) |
| 976 |
#define MPT_TRANSFER_HOST_TO_IOC (0x04000000) |
| 977 |
#define MPT_SGE_FLAGS_LAST_ELEMENT (0x80000000) |
| 978 |
#define MPT_SGE_FLAGS_END_OF_BUFFER (0x40000000) |
| 979 |
#define MPT_SGE_FLAGS_LOCAL_ADDRESS (0x08000000) |
| 980 |
#define MPT_SGE_FLAGS_DIRECTION (0x04000000) |
| 981 |
#define MPT_SGE_FLAGS_END_OF_LIST (0x01000000) |
| 982 |
|
| 983 |
#define MPT_SGE_FLAGS_TRANSACTION_ELEMENT (0x00000000) |
| 984 |
#define MPT_SGE_FLAGS_SIMPLE_ELEMENT (0x10000000) |
| 985 |
#define MPT_SGE_FLAGS_CHAIN_ELEMENT (0x30000000) |
| 986 |
#define MPT_SGE_FLAGS_ELEMENT_MASK (0x30000000) |
| 987 |
|
| 988 |
#define MPT_SGE_FLAGS_SSIMPLE_READ \ |
| 989 |
(MPT_SGE_FLAGS_LAST_ELEMENT | \ |
| 990 |
MPT_SGE_FLAGS_END_OF_BUFFER | \ |
| 991 |
MPT_SGE_FLAGS_END_OF_LIST | \ |
| 992 |
MPT_SGE_FLAGS_SIMPLE_ELEMENT | \ |
| 993 |
MPT_TRANSFER_IOC_TO_HOST) |
| 994 |
#define MPT_SGE_FLAGS_SSIMPLE_WRITE \ |
| 995 |
(MPT_SGE_FLAGS_LAST_ELEMENT | \ |
| 996 |
MPT_SGE_FLAGS_END_OF_BUFFER | \ |
| 997 |
MPT_SGE_FLAGS_END_OF_LIST | \ |
| 998 |
MPT_SGE_FLAGS_SIMPLE_ELEMENT | \ |
| 999 |
MPT_TRANSFER_HOST_TO_IOC) |
| 1000 |
|
| 1001 |
/*}-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 1002 |
#endif |
| 1003 |
|