| 1 |
/* |
| 2 |
* linux/drivers/message/fusion/mptsas.c |
| 3 |
* For use with LSI PCI chip/adapter(s) |
| 4 |
* running LSI Fusion MPT (Message Passing Technology) firmware. |
| 5 |
* |
| 6 |
* Copyright (c) 1999-2008 LSI Corporation |
| 7 |
* (mailto:[email protected]) |
| 8 |
*/ |
| 9 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 10 |
/* |
| 11 |
This program is free software; you can redistribute it and/or modify |
| 12 |
it under the terms of the GNU General Public License as published by |
| 13 |
the Free Software Foundation; version 2 of the License. |
| 14 |
|
| 15 |
This program is distributed in the hope that it will be useful, |
| 16 |
but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 17 |
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 18 |
GNU General Public License for more details. |
| 19 |
|
| 20 |
NO WARRANTY |
| 21 |
THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR |
| 22 |
CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT |
| 23 |
LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, |
| 24 |
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is |
| 25 |
solely responsible for determining the appropriateness of using and |
| 26 |
distributing the Program and assumes all risks associated with its |
| 27 |
exercise of rights under this Agreement, including but not limited to |
| 28 |
the risks and costs of program errors, damage to or loss of data, |
| 29 |
programs or equipment, and unavailability or interruption of operations. |
| 30 |
|
| 31 |
DISCLAIMER OF LIABILITY |
| 32 |
NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY |
| 33 |
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| 34 |
DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND |
| 35 |
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR |
| 36 |
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE |
| 37 |
USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED |
| 38 |
HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES |
| 39 |
|
| 40 |
You should have received a copy of the GNU General Public License |
| 41 |
along with this program; if not, write to the Free Software |
| 42 |
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| 43 |
*/ |
| 44 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 45 |
|
| 46 |
#include <linux/module.h> |
| 47 |
#include <linux/kernel.h> |
| 48 |
#include <linux/slab.h> |
| 49 |
#include <linux/init.h> |
| 50 |
#include <linux/errno.h> |
| 51 |
#include <linux/jiffies.h> |
| 52 |
#include <linux/workqueue.h> |
| 53 |
#include <linux/delay.h> /* for mdelay */ |
| 54 |
|
| 55 |
#include <scsi/scsi.h> |
| 56 |
#include <scsi/scsi_cmnd.h> |
| 57 |
#include <scsi/scsi_device.h> |
| 58 |
#include <scsi/scsi_host.h> |
| 59 |
#include <scsi/scsi_transport_sas.h> |
| 60 |
#include <scsi/scsi_transport.h> |
| 61 |
#include <scsi/scsi_dbg.h> |
| 62 |
|
| 63 |
#include "mptbase.h" |
| 64 |
#include "mptscsih.h" |
| 65 |
#include "mptsas.h" |
| 66 |
|
| 67 |
|
| 68 |
#define my_NAME "Fusion MPT SAS Host driver" |
| 69 |
#define my_VERSION MPT_LINUX_VERSION_COMMON |
| 70 |
#define MYNAM "mptsas" |
| 71 |
|
| 72 |
/* |
| 73 |
* Reserved channel for integrated raid |
| 74 |
*/ |
| 75 |
#define MPTSAS_RAID_CHANNEL 1 |
| 76 |
|
| 77 |
#define SAS_CONFIG_PAGE_TIMEOUT 30 |
| 78 |
MODULE_AUTHOR(MODULEAUTHOR); |
| 79 |
MODULE_DESCRIPTION(my_NAME); |
| 80 |
MODULE_LICENSE("GPL"); |
| 81 |
MODULE_VERSION(my_VERSION); |
| 82 |
|
| 83 |
static int mpt_pt_clear; |
| 84 |
module_param(mpt_pt_clear, int, 0); |
| 85 |
MODULE_PARM_DESC(mpt_pt_clear, |
| 86 |
" Clear persistency table: enable=1 " |
| 87 |
"(default=MPTSCSIH_PT_CLEAR=0)"); |
| 88 |
|
| 89 |
/* scsi-mid layer global parameter is max_report_luns, which is 511 */ |
| 90 |
#define MPTSAS_MAX_LUN (16895) |
| 91 |
static int max_lun = MPTSAS_MAX_LUN; |
| 92 |
module_param(max_lun, int, 0); |
| 93 |
MODULE_PARM_DESC(max_lun, " max lun, default=16895 "); |
| 94 |
|
| 95 |
static int mpt_loadtime_max_sectors = 8192; |
| 96 |
module_param(mpt_loadtime_max_sectors, int, 0); |
| 97 |
MODULE_PARM_DESC(mpt_loadtime_max_sectors, |
| 98 |
" Maximum sector define for Host Bus Adaptor.Range 64 to 8192 default=8192"); |
| 99 |
|
| 100 |
static u8 mptsasDoneCtx = MPT_MAX_PROTOCOL_DRIVERS; |
| 101 |
static u8 mptsasTaskCtx = MPT_MAX_PROTOCOL_DRIVERS; |
| 102 |
static u8 mptsasInternalCtx = MPT_MAX_PROTOCOL_DRIVERS; /* Used only for internal commands */ |
| 103 |
static u8 mptsasMgmtCtx = MPT_MAX_PROTOCOL_DRIVERS; |
| 104 |
static u8 mptsasDeviceResetCtx = MPT_MAX_PROTOCOL_DRIVERS; |
| 105 |
|
| 106 |
static void mptsas_firmware_event_work(struct work_struct *work); |
| 107 |
static void mptsas_send_sas_event(struct fw_event_work *fw_event); |
| 108 |
static void mptsas_send_raid_event(struct fw_event_work *fw_event); |
| 109 |
static void mptsas_send_ir2_event(struct fw_event_work *fw_event); |
| 110 |
static void mptsas_parse_device_info(struct sas_identify *identify, |
| 111 |
struct mptsas_devinfo *device_info); |
| 112 |
static inline void mptsas_set_rphy(MPT_ADAPTER *ioc, |
| 113 |
struct mptsas_phyinfo *phy_info, struct sas_rphy *rphy); |
| 114 |
static struct mptsas_phyinfo *mptsas_find_phyinfo_by_sas_address |
| 115 |
(MPT_ADAPTER *ioc, u64 sas_address); |
| 116 |
static int mptsas_sas_device_pg0(MPT_ADAPTER *ioc, |
| 117 |
struct mptsas_devinfo *device_info, u32 form, u32 form_specific); |
| 118 |
static int mptsas_sas_enclosure_pg0(MPT_ADAPTER *ioc, |
| 119 |
struct mptsas_enclosure *enclosure, u32 form, u32 form_specific); |
| 120 |
static int mptsas_add_end_device(MPT_ADAPTER *ioc, |
| 121 |
struct mptsas_phyinfo *phy_info); |
| 122 |
static void mptsas_del_end_device(MPT_ADAPTER *ioc, |
| 123 |
struct mptsas_phyinfo *phy_info); |
| 124 |
static void mptsas_send_link_status_event(struct fw_event_work *fw_event); |
| 125 |
static struct mptsas_portinfo *mptsas_find_portinfo_by_sas_address |
| 126 |
(MPT_ADAPTER *ioc, u64 sas_address); |
| 127 |
static void mptsas_expander_delete(MPT_ADAPTER *ioc, |
| 128 |
struct mptsas_portinfo *port_info, u8 force); |
| 129 |
static void mptsas_send_expander_event(struct fw_event_work *fw_event); |
| 130 |
static void mptsas_not_responding_devices(MPT_ADAPTER *ioc); |
| 131 |
static void mptsas_scan_sas_topology(MPT_ADAPTER *ioc); |
| 132 |
static void mptsas_broadcast_primitive_work(struct fw_event_work *fw_event); |
| 133 |
static void mptsas_handle_queue_full_event(struct fw_event_work *fw_event); |
| 134 |
static void mptsas_volume_delete(MPT_ADAPTER *ioc, u8 id); |
| 135 |
void mptsas_schedule_target_reset(void *ioc); |
| 136 |
|
| 137 |
static void mptsas_print_phy_data(MPT_ADAPTER *ioc, |
| 138 |
MPI_SAS_IO_UNIT0_PHY_DATA *phy_data) |
| 139 |
{ |
| 140 |
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 141 |
"---- IO UNIT PAGE 0 ------------\n", ioc->name)); |
| 142 |
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Handle=0x%X\n", |
| 143 |
ioc->name, le16_to_cpu(phy_data->AttachedDeviceHandle))); |
| 144 |
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Controller Handle=0x%X\n", |
| 145 |
ioc->name, le16_to_cpu(phy_data->ControllerDevHandle))); |
| 146 |
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Port=0x%X\n", |
| 147 |
ioc->name, phy_data->Port)); |
| 148 |
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Port Flags=0x%X\n", |
| 149 |
ioc->name, phy_data->PortFlags)); |
| 150 |
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "PHY Flags=0x%X\n", |
| 151 |
ioc->name, phy_data->PhyFlags)); |
| 152 |
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Negotiated Link Rate=0x%X\n", |
| 153 |
ioc->name, phy_data->NegotiatedLinkRate)); |
| 154 |
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 155 |
"Controller PHY Device Info=0x%X\n", ioc->name, |
| 156 |
le32_to_cpu(phy_data->ControllerPhyDeviceInfo))); |
| 157 |
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DiscoveryStatus=0x%X\n\n", |
| 158 |
ioc->name, le32_to_cpu(phy_data->DiscoveryStatus))); |
| 159 |
} |
| 160 |
|
| 161 |
static void mptsas_print_phy_pg0(MPT_ADAPTER *ioc, SasPhyPage0_t *pg0) |
| 162 |
{ |
| 163 |
__le64 sas_address; |
| 164 |
|
| 165 |
memcpy(&sas_address, &pg0->SASAddress, sizeof(__le64)); |
| 166 |
|
| 167 |
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 168 |
"---- SAS PHY PAGE 0 ------------\n", ioc->name)); |
| 169 |
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 170 |
"Attached Device Handle=0x%X\n", ioc->name, |
| 171 |
le16_to_cpu(pg0->AttachedDevHandle))); |
| 172 |
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SAS Address=0x%llX\n", |
| 173 |
ioc->name, (unsigned long long)le64_to_cpu(sas_address))); |
| 174 |
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 175 |
"Attached PHY Identifier=0x%X\n", ioc->name, |
| 176 |
pg0->AttachedPhyIdentifier)); |
| 177 |
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Attached Device Info=0x%X\n", |
| 178 |
ioc->name, le32_to_cpu(pg0->AttachedDeviceInfo))); |
| 179 |
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Programmed Link Rate=0x%X\n", |
| 180 |
ioc->name, pg0->ProgrammedLinkRate)); |
| 181 |
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Change Count=0x%X\n", |
| 182 |
ioc->name, pg0->ChangeCount)); |
| 183 |
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "PHY Info=0x%X\n\n", |
| 184 |
ioc->name, le32_to_cpu(pg0->PhyInfo))); |
| 185 |
} |
| 186 |
|
| 187 |
static void mptsas_print_phy_pg1(MPT_ADAPTER *ioc, SasPhyPage1_t *pg1) |
| 188 |
{ |
| 189 |
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 190 |
"---- SAS PHY PAGE 1 ------------\n", ioc->name)); |
| 191 |
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Invalid Dword Count=0x%x\n", |
| 192 |
ioc->name, pg1->InvalidDwordCount)); |
| 193 |
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 194 |
"Running Disparity Error Count=0x%x\n", ioc->name, |
| 195 |
pg1->RunningDisparityErrorCount)); |
| 196 |
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 197 |
"Loss Dword Synch Count=0x%x\n", ioc->name, |
| 198 |
pg1->LossDwordSynchCount)); |
| 199 |
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 200 |
"PHY Reset Problem Count=0x%x\n\n", ioc->name, |
| 201 |
pg1->PhyResetProblemCount)); |
| 202 |
} |
| 203 |
|
| 204 |
static void mptsas_print_device_pg0(MPT_ADAPTER *ioc, SasDevicePage0_t *pg0) |
| 205 |
{ |
| 206 |
__le64 sas_address; |
| 207 |
|
| 208 |
memcpy(&sas_address, &pg0->SASAddress, sizeof(__le64)); |
| 209 |
|
| 210 |
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 211 |
"---- SAS DEVICE PAGE 0 ---------\n", ioc->name)); |
| 212 |
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Handle=0x%X\n", |
| 213 |
ioc->name, le16_to_cpu(pg0->DevHandle))); |
| 214 |
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Parent Handle=0x%X\n", |
| 215 |
ioc->name, le16_to_cpu(pg0->ParentDevHandle))); |
| 216 |
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Enclosure Handle=0x%X\n", |
| 217 |
ioc->name, le16_to_cpu(pg0->EnclosureHandle))); |
| 218 |
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Slot=0x%X\n", |
| 219 |
ioc->name, le16_to_cpu(pg0->Slot))); |
| 220 |
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SAS Address=0x%llX\n", |
| 221 |
ioc->name, (unsigned long long)le64_to_cpu(sas_address))); |
| 222 |
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Target ID=0x%X\n", |
| 223 |
ioc->name, pg0->TargetID)); |
| 224 |
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Bus=0x%X\n", |
| 225 |
ioc->name, pg0->Bus)); |
| 226 |
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Parent Phy Num=0x%X\n", |
| 227 |
ioc->name, pg0->PhyNum)); |
| 228 |
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Access Status=0x%X\n", |
| 229 |
ioc->name, le16_to_cpu(pg0->AccessStatus))); |
| 230 |
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Device Info=0x%X\n", |
| 231 |
ioc->name, le32_to_cpu(pg0->DeviceInfo))); |
| 232 |
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Flags=0x%X\n", |
| 233 |
ioc->name, le16_to_cpu(pg0->Flags))); |
| 234 |
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Physical Port=0x%X\n\n", |
| 235 |
ioc->name, pg0->PhysicalPort)); |
| 236 |
} |
| 237 |
|
| 238 |
static void mptsas_print_expander_pg1(MPT_ADAPTER *ioc, SasExpanderPage1_t *pg1) |
| 239 |
{ |
| 240 |
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 241 |
"---- SAS EXPANDER PAGE 1 ------------\n", ioc->name)); |
| 242 |
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Physical Port=0x%X\n", |
| 243 |
ioc->name, pg1->PhysicalPort)); |
| 244 |
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "PHY Identifier=0x%X\n", |
| 245 |
ioc->name, pg1->PhyIdentifier)); |
| 246 |
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Negotiated Link Rate=0x%X\n", |
| 247 |
ioc->name, pg1->NegotiatedLinkRate)); |
| 248 |
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Programmed Link Rate=0x%X\n", |
| 249 |
ioc->name, pg1->ProgrammedLinkRate)); |
| 250 |
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Hardware Link Rate=0x%X\n", |
| 251 |
ioc->name, pg1->HwLinkRate)); |
| 252 |
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Owner Device Handle=0x%X\n", |
| 253 |
ioc->name, le16_to_cpu(pg1->OwnerDevHandle))); |
| 254 |
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 255 |
"Attached Device Handle=0x%X\n\n", ioc->name, |
| 256 |
le16_to_cpu(pg1->AttachedDevHandle))); |
| 257 |
} |
| 258 |
|
| 259 |
/* inhibit sas firmware event handling */ |
| 260 |
static void |
| 261 |
mptsas_fw_event_off(MPT_ADAPTER *ioc) |
| 262 |
{ |
| 263 |
unsigned long flags; |
| 264 |
|
| 265 |
spin_lock_irqsave(&ioc->fw_event_lock, flags); |
| 266 |
ioc->fw_events_off = 1; |
| 267 |
ioc->sas_discovery_quiesce_io = 0; |
| 268 |
spin_unlock_irqrestore(&ioc->fw_event_lock, flags); |
| 269 |
|
| 270 |
} |
| 271 |
|
| 272 |
/* enable sas firmware event handling */ |
| 273 |
static void |
| 274 |
mptsas_fw_event_on(MPT_ADAPTER *ioc) |
| 275 |
{ |
| 276 |
unsigned long flags; |
| 277 |
|
| 278 |
spin_lock_irqsave(&ioc->fw_event_lock, flags); |
| 279 |
ioc->fw_events_off = 0; |
| 280 |
spin_unlock_irqrestore(&ioc->fw_event_lock, flags); |
| 281 |
} |
| 282 |
|
| 283 |
/* queue a sas firmware event */ |
| 284 |
static void |
| 285 |
mptsas_add_fw_event(MPT_ADAPTER *ioc, struct fw_event_work *fw_event, |
| 286 |
unsigned long delay) |
| 287 |
{ |
| 288 |
unsigned long flags; |
| 289 |
|
| 290 |
spin_lock_irqsave(&ioc->fw_event_lock, flags); |
| 291 |
list_add_tail(&fw_event->list, &ioc->fw_event_list); |
| 292 |
fw_event->users = 1; |
| 293 |
INIT_DELAYED_WORK(&fw_event->work, mptsas_firmware_event_work); |
| 294 |
devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: add (fw_event=0x%p)" |
| 295 |
"on cpuid %d\n", ioc->name, __func__, |
| 296 |
fw_event, smp_processor_id())); |
| 297 |
queue_delayed_work_on(smp_processor_id(), ioc->fw_event_q, |
| 298 |
&fw_event->work, delay); |
| 299 |
spin_unlock_irqrestore(&ioc->fw_event_lock, flags); |
| 300 |
} |
| 301 |
|
| 302 |
/* requeue a sas firmware event */ |
| 303 |
static void |
| 304 |
mptsas_requeue_fw_event(MPT_ADAPTER *ioc, struct fw_event_work *fw_event, |
| 305 |
unsigned long delay) |
| 306 |
{ |
| 307 |
unsigned long flags; |
| 308 |
spin_lock_irqsave(&ioc->fw_event_lock, flags); |
| 309 |
devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: reschedule task " |
| 310 |
"(fw_event=0x%p)on cpuid %d\n", ioc->name, __func__, |
| 311 |
fw_event, smp_processor_id())); |
| 312 |
fw_event->retries++; |
| 313 |
queue_delayed_work_on(smp_processor_id(), ioc->fw_event_q, |
| 314 |
&fw_event->work, msecs_to_jiffies(delay)); |
| 315 |
spin_unlock_irqrestore(&ioc->fw_event_lock, flags); |
| 316 |
} |
| 317 |
|
| 318 |
static void __mptsas_free_fw_event(MPT_ADAPTER *ioc, |
| 319 |
struct fw_event_work *fw_event) |
| 320 |
{ |
| 321 |
devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: kfree (fw_event=0x%p)\n", |
| 322 |
ioc->name, __func__, fw_event)); |
| 323 |
list_del(&fw_event->list); |
| 324 |
kfree(fw_event); |
| 325 |
} |
| 326 |
|
| 327 |
/* free memory associated to a sas firmware event */ |
| 328 |
static void |
| 329 |
mptsas_free_fw_event(MPT_ADAPTER *ioc, struct fw_event_work *fw_event) |
| 330 |
{ |
| 331 |
unsigned long flags; |
| 332 |
|
| 333 |
spin_lock_irqsave(&ioc->fw_event_lock, flags); |
| 334 |
fw_event->users--; |
| 335 |
if (!fw_event->users) |
| 336 |
__mptsas_free_fw_event(ioc, fw_event); |
| 337 |
spin_unlock_irqrestore(&ioc->fw_event_lock, flags); |
| 338 |
} |
| 339 |
|
| 340 |
/* walk the firmware event queue, and either stop or wait for |
| 341 |
* outstanding events to complete */ |
| 342 |
static void |
| 343 |
mptsas_cleanup_fw_event_q(MPT_ADAPTER *ioc) |
| 344 |
{ |
| 345 |
struct fw_event_work *fw_event; |
| 346 |
struct mptsas_target_reset_event *target_reset_list, *n; |
| 347 |
MPT_SCSI_HOST *hd = shost_priv(ioc->sh); |
| 348 |
unsigned long flags; |
| 349 |
|
| 350 |
/* flush the target_reset_list */ |
| 351 |
if (!list_empty(&hd->target_reset_list)) { |
| 352 |
list_for_each_entry_safe(target_reset_list, n, |
| 353 |
&hd->target_reset_list, list) { |
| 354 |
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 355 |
"%s: removing target reset for id=%d\n", |
| 356 |
ioc->name, __func__, |
| 357 |
target_reset_list->sas_event_data.TargetID)); |
| 358 |
list_del(&target_reset_list->list); |
| 359 |
kfree(target_reset_list); |
| 360 |
} |
| 361 |
} |
| 362 |
|
| 363 |
if (list_empty(&ioc->fw_event_list) || !ioc->fw_event_q) |
| 364 |
return; |
| 365 |
|
| 366 |
spin_lock_irqsave(&ioc->fw_event_lock, flags); |
| 367 |
|
| 368 |
while (!list_empty(&ioc->fw_event_list)) { |
| 369 |
bool canceled = false; |
| 370 |
|
| 371 |
fw_event = list_first_entry(&ioc->fw_event_list, |
| 372 |
struct fw_event_work, list); |
| 373 |
fw_event->users++; |
| 374 |
spin_unlock_irqrestore(&ioc->fw_event_lock, flags); |
| 375 |
if (cancel_delayed_work_sync(&fw_event->work)) |
| 376 |
canceled = true; |
| 377 |
|
| 378 |
spin_lock_irqsave(&ioc->fw_event_lock, flags); |
| 379 |
if (canceled) |
| 380 |
fw_event->users--; |
| 381 |
fw_event->users--; |
| 382 |
WARN_ON_ONCE(fw_event->users); |
| 383 |
__mptsas_free_fw_event(ioc, fw_event); |
| 384 |
} |
| 385 |
spin_unlock_irqrestore(&ioc->fw_event_lock, flags); |
| 386 |
} |
| 387 |
|
| 388 |
|
| 389 |
static inline MPT_ADAPTER *phy_to_ioc(struct sas_phy *phy) |
| 390 |
{ |
| 391 |
struct Scsi_Host *shost = dev_to_shost(phy->dev.parent); |
| 392 |
return ((MPT_SCSI_HOST *)shost->hostdata)->ioc; |
| 393 |
} |
| 394 |
|
| 395 |
static inline MPT_ADAPTER *rphy_to_ioc(struct sas_rphy *rphy) |
| 396 |
{ |
| 397 |
struct Scsi_Host *shost = dev_to_shost(rphy->dev.parent->parent); |
| 398 |
return ((MPT_SCSI_HOST *)shost->hostdata)->ioc; |
| 399 |
} |
| 400 |
|
| 401 |
/* |
| 402 |
* mptsas_find_portinfo_by_handle |
| 403 |
* |
| 404 |
* This function should be called with the sas_topology_mutex already held |
| 405 |
*/ |
| 406 |
static struct mptsas_portinfo * |
| 407 |
mptsas_find_portinfo_by_handle(MPT_ADAPTER *ioc, u16 handle) |
| 408 |
{ |
| 409 |
struct mptsas_portinfo *port_info, *rc=NULL; |
| 410 |
int i; |
| 411 |
|
| 412 |
list_for_each_entry(port_info, &ioc->sas_topology, list) |
| 413 |
for (i = 0; i < port_info->num_phys; i++) |
| 414 |
if (port_info->phy_info[i].identify.handle == handle) { |
| 415 |
rc = port_info; |
| 416 |
goto out; |
| 417 |
} |
| 418 |
out: |
| 419 |
return rc; |
| 420 |
} |
| 421 |
|
| 422 |
/** |
| 423 |
* mptsas_find_portinfo_by_sas_address - find and return portinfo for |
| 424 |
* this sas_address |
| 425 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 426 |
* @sas_address: expander sas address |
| 427 |
* |
| 428 |
* This function should be called with the sas_topology_mutex already held. |
| 429 |
* |
| 430 |
* Return: %NULL if not found. |
| 431 |
**/ |
| 432 |
static struct mptsas_portinfo * |
| 433 |
mptsas_find_portinfo_by_sas_address(MPT_ADAPTER *ioc, u64 sas_address) |
| 434 |
{ |
| 435 |
struct mptsas_portinfo *port_info, *rc = NULL; |
| 436 |
int i; |
| 437 |
|
| 438 |
if (sas_address >= ioc->hba_port_sas_addr && |
| 439 |
sas_address < (ioc->hba_port_sas_addr + |
| 440 |
ioc->hba_port_num_phy)) |
| 441 |
return ioc->hba_port_info; |
| 442 |
|
| 443 |
mutex_lock(&ioc->sas_topology_mutex); |
| 444 |
list_for_each_entry(port_info, &ioc->sas_topology, list) |
| 445 |
for (i = 0; i < port_info->num_phys; i++) |
| 446 |
if (port_info->phy_info[i].identify.sas_address == |
| 447 |
sas_address) { |
| 448 |
rc = port_info; |
| 449 |
goto out; |
| 450 |
} |
| 451 |
out: |
| 452 |
mutex_unlock(&ioc->sas_topology_mutex); |
| 453 |
return rc; |
| 454 |
} |
| 455 |
|
| 456 |
/* |
| 457 |
* Returns true if there is a scsi end device |
| 458 |
*/ |
| 459 |
static inline int |
| 460 |
mptsas_is_end_device(struct mptsas_devinfo * attached) |
| 461 |
{ |
| 462 |
if ((attached->sas_address) && |
| 463 |
(attached->device_info & |
| 464 |
MPI_SAS_DEVICE_INFO_END_DEVICE) && |
| 465 |
((attached->device_info & |
| 466 |
MPI_SAS_DEVICE_INFO_SSP_TARGET) | |
| 467 |
(attached->device_info & |
| 468 |
MPI_SAS_DEVICE_INFO_STP_TARGET) | |
| 469 |
(attached->device_info & |
| 470 |
MPI_SAS_DEVICE_INFO_SATA_DEVICE))) |
| 471 |
return 1; |
| 472 |
else |
| 473 |
return 0; |
| 474 |
} |
| 475 |
|
| 476 |
/* no mutex */ |
| 477 |
static void |
| 478 |
mptsas_port_delete(MPT_ADAPTER *ioc, struct mptsas_portinfo_details * port_details) |
| 479 |
{ |
| 480 |
struct mptsas_portinfo *port_info; |
| 481 |
struct mptsas_phyinfo *phy_info; |
| 482 |
u8 i; |
| 483 |
|
| 484 |
if (!port_details) |
| 485 |
return; |
| 486 |
|
| 487 |
port_info = port_details->port_info; |
| 488 |
phy_info = port_info->phy_info; |
| 489 |
|
| 490 |
dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: [%p]: num_phys=%02d " |
| 491 |
"bitmask=0x%016llX\n", ioc->name, __func__, port_details, |
| 492 |
port_details->num_phys, (unsigned long long) |
| 493 |
port_details->phy_bitmask)); |
| 494 |
|
| 495 |
for (i = 0; i < port_info->num_phys; i++, phy_info++) { |
| 496 |
if(phy_info->port_details != port_details) |
| 497 |
continue; |
| 498 |
memset(&phy_info->attached, 0, sizeof(struct mptsas_devinfo)); |
| 499 |
mptsas_set_rphy(ioc, phy_info, NULL); |
| 500 |
phy_info->port_details = NULL; |
| 501 |
} |
| 502 |
kfree(port_details); |
| 503 |
} |
| 504 |
|
| 505 |
static inline struct sas_rphy * |
| 506 |
mptsas_get_rphy(struct mptsas_phyinfo *phy_info) |
| 507 |
{ |
| 508 |
if (phy_info->port_details) |
| 509 |
return phy_info->port_details->rphy; |
| 510 |
else |
| 511 |
return NULL; |
| 512 |
} |
| 513 |
|
| 514 |
static inline void |
| 515 |
mptsas_set_rphy(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info, struct sas_rphy *rphy) |
| 516 |
{ |
| 517 |
if (phy_info->port_details) { |
| 518 |
phy_info->port_details->rphy = rphy; |
| 519 |
dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "sas_rphy_add: rphy=%p\n", |
| 520 |
ioc->name, rphy)); |
| 521 |
} |
| 522 |
|
| 523 |
if (rphy) { |
| 524 |
dsaswideprintk(ioc, dev_printk(KERN_DEBUG, |
| 525 |
&rphy->dev, MYIOC_s_FMT "add:", ioc->name)); |
| 526 |
dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "rphy=%p release=%p\n", |
| 527 |
ioc->name, rphy, rphy->dev.release)); |
| 528 |
} |
| 529 |
} |
| 530 |
|
| 531 |
static inline struct sas_port * |
| 532 |
mptsas_get_port(struct mptsas_phyinfo *phy_info) |
| 533 |
{ |
| 534 |
if (phy_info->port_details) |
| 535 |
return phy_info->port_details->port; |
| 536 |
else |
| 537 |
return NULL; |
| 538 |
} |
| 539 |
|
| 540 |
static inline void |
| 541 |
mptsas_set_port(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info, struct sas_port *port) |
| 542 |
{ |
| 543 |
if (phy_info->port_details) |
| 544 |
phy_info->port_details->port = port; |
| 545 |
|
| 546 |
if (port) { |
| 547 |
dsaswideprintk(ioc, dev_printk(KERN_DEBUG, |
| 548 |
&port->dev, MYIOC_s_FMT "add:", ioc->name)); |
| 549 |
dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "port=%p release=%p\n", |
| 550 |
ioc->name, port, port->dev.release)); |
| 551 |
} |
| 552 |
} |
| 553 |
|
| 554 |
static inline struct scsi_target * |
| 555 |
mptsas_get_starget(struct mptsas_phyinfo *phy_info) |
| 556 |
{ |
| 557 |
if (phy_info->port_details) |
| 558 |
return phy_info->port_details->starget; |
| 559 |
else |
| 560 |
return NULL; |
| 561 |
} |
| 562 |
|
| 563 |
static inline void |
| 564 |
mptsas_set_starget(struct mptsas_phyinfo *phy_info, struct scsi_target * |
| 565 |
starget) |
| 566 |
{ |
| 567 |
if (phy_info->port_details) |
| 568 |
phy_info->port_details->starget = starget; |
| 569 |
} |
| 570 |
|
| 571 |
/** |
| 572 |
* mptsas_add_device_component - adds a new device component to our lists |
| 573 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 574 |
* @channel: channel number |
| 575 |
* @id: Logical Target ID for reset (if appropriate) |
| 576 |
* @sas_address: expander sas address |
| 577 |
* @device_info: specific bits (flags) for devices |
| 578 |
* @slot: enclosure slot ID |
| 579 |
* @enclosure_logical_id: enclosure WWN |
| 580 |
* |
| 581 |
**/ |
| 582 |
static void |
| 583 |
mptsas_add_device_component(MPT_ADAPTER *ioc, u8 channel, u8 id, |
| 584 |
u64 sas_address, u32 device_info, u16 slot, u64 enclosure_logical_id) |
| 585 |
{ |
| 586 |
struct mptsas_device_info *sas_info, *next; |
| 587 |
struct scsi_device *sdev; |
| 588 |
struct scsi_target *starget; |
| 589 |
struct sas_rphy *rphy; |
| 590 |
|
| 591 |
/* |
| 592 |
* Delete all matching devices out of the list |
| 593 |
*/ |
| 594 |
mutex_lock(&ioc->sas_device_info_mutex); |
| 595 |
list_for_each_entry_safe(sas_info, next, &ioc->sas_device_info_list, |
| 596 |
list) { |
| 597 |
if (!sas_info->is_logical_volume && |
| 598 |
(sas_info->sas_address == sas_address || |
| 599 |
(sas_info->fw.channel == channel && |
| 600 |
sas_info->fw.id == id))) { |
| 601 |
list_del(&sas_info->list); |
| 602 |
kfree(sas_info); |
| 603 |
} |
| 604 |
} |
| 605 |
|
| 606 |
sas_info = kzalloc_obj(struct mptsas_device_info); |
| 607 |
if (!sas_info) |
| 608 |
goto out; |
| 609 |
|
| 610 |
/* |
| 611 |
* Set Firmware mapping |
| 612 |
*/ |
| 613 |
sas_info->fw.id = id; |
| 614 |
sas_info->fw.channel = channel; |
| 615 |
|
| 616 |
sas_info->sas_address = sas_address; |
| 617 |
sas_info->device_info = device_info; |
| 618 |
sas_info->slot = slot; |
| 619 |
sas_info->enclosure_logical_id = enclosure_logical_id; |
| 620 |
INIT_LIST_HEAD(&sas_info->list); |
| 621 |
list_add_tail(&sas_info->list, &ioc->sas_device_info_list); |
| 622 |
|
| 623 |
/* |
| 624 |
* Set OS mapping |
| 625 |
*/ |
| 626 |
shost_for_each_device(sdev, ioc->sh) { |
| 627 |
starget = scsi_target(sdev); |
| 628 |
rphy = dev_to_rphy(starget->dev.parent); |
| 629 |
if (rphy->identify.sas_address == sas_address) { |
| 630 |
sas_info->os.id = starget->id; |
| 631 |
sas_info->os.channel = starget->channel; |
| 632 |
} |
| 633 |
} |
| 634 |
|
| 635 |
out: |
| 636 |
mutex_unlock(&ioc->sas_device_info_mutex); |
| 637 |
return; |
| 638 |
} |
| 639 |
|
| 640 |
/** |
| 641 |
* mptsas_add_device_component_by_fw - adds a new device component by FW ID |
| 642 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 643 |
* @channel: channel number |
| 644 |
* @id: Logical Target ID |
| 645 |
* |
| 646 |
**/ |
| 647 |
static void |
| 648 |
mptsas_add_device_component_by_fw(MPT_ADAPTER *ioc, u8 channel, u8 id) |
| 649 |
{ |
| 650 |
struct mptsas_devinfo sas_device; |
| 651 |
struct mptsas_enclosure enclosure_info; |
| 652 |
int rc; |
| 653 |
|
| 654 |
rc = mptsas_sas_device_pg0(ioc, &sas_device, |
| 655 |
(MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID << |
| 656 |
MPI_SAS_DEVICE_PGAD_FORM_SHIFT), |
| 657 |
(channel << 8) + id); |
| 658 |
if (rc) |
| 659 |
return; |
| 660 |
|
| 661 |
memset(&enclosure_info, 0, sizeof(struct mptsas_enclosure)); |
| 662 |
mptsas_sas_enclosure_pg0(ioc, &enclosure_info, |
| 663 |
(MPI_SAS_ENCLOS_PGAD_FORM_HANDLE << |
| 664 |
MPI_SAS_ENCLOS_PGAD_FORM_SHIFT), |
| 665 |
sas_device.handle_enclosure); |
| 666 |
|
| 667 |
mptsas_add_device_component(ioc, sas_device.channel, |
| 668 |
sas_device.id, sas_device.sas_address, sas_device.device_info, |
| 669 |
sas_device.slot, enclosure_info.enclosure_logical_id); |
| 670 |
} |
| 671 |
|
| 672 |
/** |
| 673 |
* mptsas_add_device_component_starget_ir - Handle Integrated RAID, adding each individual device to list |
| 674 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 675 |
* @starget: SCSI target for this SCSI device |
| 676 |
* |
| 677 |
**/ |
| 678 |
static void |
| 679 |
mptsas_add_device_component_starget_ir(MPT_ADAPTER *ioc, |
| 680 |
struct scsi_target *starget) |
| 681 |
{ |
| 682 |
CONFIGPARMS cfg; |
| 683 |
ConfigPageHeader_t hdr; |
| 684 |
dma_addr_t dma_handle; |
| 685 |
pRaidVolumePage0_t buffer = NULL; |
| 686 |
int i; |
| 687 |
RaidPhysDiskPage0_t phys_disk; |
| 688 |
struct mptsas_device_info *sas_info, *next; |
| 689 |
|
| 690 |
memset(&cfg, 0 , sizeof(CONFIGPARMS)); |
| 691 |
memset(&hdr, 0 , sizeof(ConfigPageHeader_t)); |
| 692 |
hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_VOLUME; |
| 693 |
/* assumption that all volumes on channel = 0 */ |
| 694 |
cfg.pageAddr = starget->id; |
| 695 |
cfg.cfghdr.hdr = &hdr; |
| 696 |
cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; |
| 697 |
cfg.timeout = SAS_CONFIG_PAGE_TIMEOUT; |
| 698 |
|
| 699 |
if (mpt_config(ioc, &cfg) != 0) |
| 700 |
goto out; |
| 701 |
|
| 702 |
if (!hdr.PageLength) |
| 703 |
goto out; |
| 704 |
|
| 705 |
buffer = dma_alloc_coherent(&ioc->pcidev->dev, hdr.PageLength * 4, |
| 706 |
&dma_handle, GFP_KERNEL); |
| 707 |
|
| 708 |
if (!buffer) |
| 709 |
goto out; |
| 710 |
|
| 711 |
cfg.physAddr = dma_handle; |
| 712 |
cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; |
| 713 |
|
| 714 |
if (mpt_config(ioc, &cfg) != 0) |
| 715 |
goto out; |
| 716 |
|
| 717 |
if (!buffer->NumPhysDisks) |
| 718 |
goto out; |
| 719 |
|
| 720 |
/* |
| 721 |
* Adding entry for hidden components |
| 722 |
*/ |
| 723 |
for (i = 0; i < buffer->NumPhysDisks; i++) { |
| 724 |
|
| 725 |
if (mpt_raid_phys_disk_pg0(ioc, |
| 726 |
buffer->PhysDisk[i].PhysDiskNum, &phys_disk) != 0) |
| 727 |
continue; |
| 728 |
|
| 729 |
mptsas_add_device_component_by_fw(ioc, phys_disk.PhysDiskBus, |
| 730 |
phys_disk.PhysDiskID); |
| 731 |
|
| 732 |
mutex_lock(&ioc->sas_device_info_mutex); |
| 733 |
list_for_each_entry(sas_info, &ioc->sas_device_info_list, |
| 734 |
list) { |
| 735 |
if (!sas_info->is_logical_volume && |
| 736 |
(sas_info->fw.channel == phys_disk.PhysDiskBus && |
| 737 |
sas_info->fw.id == phys_disk.PhysDiskID)) { |
| 738 |
sas_info->is_hidden_raid_component = 1; |
| 739 |
sas_info->volume_id = starget->id; |
| 740 |
} |
| 741 |
} |
| 742 |
mutex_unlock(&ioc->sas_device_info_mutex); |
| 743 |
|
| 744 |
} |
| 745 |
|
| 746 |
/* |
| 747 |
* Delete all matching devices out of the list |
| 748 |
*/ |
| 749 |
mutex_lock(&ioc->sas_device_info_mutex); |
| 750 |
list_for_each_entry_safe(sas_info, next, &ioc->sas_device_info_list, |
| 751 |
list) { |
| 752 |
if (sas_info->is_logical_volume && sas_info->fw.id == |
| 753 |
starget->id) { |
| 754 |
list_del(&sas_info->list); |
| 755 |
kfree(sas_info); |
| 756 |
} |
| 757 |
} |
| 758 |
|
| 759 |
sas_info = kzalloc_obj(struct mptsas_device_info); |
| 760 |
if (sas_info) { |
| 761 |
sas_info->fw.id = starget->id; |
| 762 |
sas_info->os.id = starget->id; |
| 763 |
sas_info->os.channel = starget->channel; |
| 764 |
sas_info->is_logical_volume = 1; |
| 765 |
INIT_LIST_HEAD(&sas_info->list); |
| 766 |
list_add_tail(&sas_info->list, &ioc->sas_device_info_list); |
| 767 |
} |
| 768 |
mutex_unlock(&ioc->sas_device_info_mutex); |
| 769 |
|
| 770 |
out: |
| 771 |
if (buffer) |
| 772 |
dma_free_coherent(&ioc->pcidev->dev, hdr.PageLength * 4, |
| 773 |
buffer, dma_handle); |
| 774 |
} |
| 775 |
|
| 776 |
/** |
| 777 |
* mptsas_add_device_component_starget - adds a SCSI target device component |
| 778 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 779 |
* @starget: SCSI target for this SCSI device |
| 780 |
* |
| 781 |
**/ |
| 782 |
static void |
| 783 |
mptsas_add_device_component_starget(MPT_ADAPTER *ioc, |
| 784 |
struct scsi_target *starget) |
| 785 |
{ |
| 786 |
struct sas_rphy *rphy; |
| 787 |
struct mptsas_phyinfo *phy_info = NULL; |
| 788 |
struct mptsas_enclosure enclosure_info; |
| 789 |
|
| 790 |
rphy = dev_to_rphy(starget->dev.parent); |
| 791 |
phy_info = mptsas_find_phyinfo_by_sas_address(ioc, |
| 792 |
rphy->identify.sas_address); |
| 793 |
if (!phy_info) |
| 794 |
return; |
| 795 |
|
| 796 |
memset(&enclosure_info, 0, sizeof(struct mptsas_enclosure)); |
| 797 |
mptsas_sas_enclosure_pg0(ioc, &enclosure_info, |
| 798 |
(MPI_SAS_ENCLOS_PGAD_FORM_HANDLE << |
| 799 |
MPI_SAS_ENCLOS_PGAD_FORM_SHIFT), |
| 800 |
phy_info->attached.handle_enclosure); |
| 801 |
|
| 802 |
mptsas_add_device_component(ioc, phy_info->attached.channel, |
| 803 |
phy_info->attached.id, phy_info->attached.sas_address, |
| 804 |
phy_info->attached.device_info, |
| 805 |
phy_info->attached.slot, enclosure_info.enclosure_logical_id); |
| 806 |
} |
| 807 |
|
| 808 |
/** |
| 809 |
* mptsas_del_device_component_by_os - Once a device has been removed, we mark the entry in the list as being cached |
| 810 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 811 |
* @channel: os mapped id's |
| 812 |
* @id: Logical Target ID |
| 813 |
* |
| 814 |
**/ |
| 815 |
static void |
| 816 |
mptsas_del_device_component_by_os(MPT_ADAPTER *ioc, u8 channel, u8 id) |
| 817 |
{ |
| 818 |
struct mptsas_device_info *sas_info, *next; |
| 819 |
|
| 820 |
/* |
| 821 |
* Set is_cached flag |
| 822 |
*/ |
| 823 |
list_for_each_entry_safe(sas_info, next, &ioc->sas_device_info_list, |
| 824 |
list) { |
| 825 |
if (sas_info->os.channel == channel && sas_info->os.id == id) |
| 826 |
sas_info->is_cached = 1; |
| 827 |
} |
| 828 |
} |
| 829 |
|
| 830 |
/** |
| 831 |
* mptsas_del_device_components - Cleaning the list |
| 832 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 833 |
* |
| 834 |
**/ |
| 835 |
static void |
| 836 |
mptsas_del_device_components(MPT_ADAPTER *ioc) |
| 837 |
{ |
| 838 |
struct mptsas_device_info *sas_info, *next; |
| 839 |
|
| 840 |
mutex_lock(&ioc->sas_device_info_mutex); |
| 841 |
list_for_each_entry_safe(sas_info, next, &ioc->sas_device_info_list, |
| 842 |
list) { |
| 843 |
list_del(&sas_info->list); |
| 844 |
kfree(sas_info); |
| 845 |
} |
| 846 |
mutex_unlock(&ioc->sas_device_info_mutex); |
| 847 |
} |
| 848 |
|
| 849 |
|
| 850 |
/* |
| 851 |
* mptsas_setup_wide_ports |
| 852 |
* |
| 853 |
* Updates for new and existing narrow/wide port configuration |
| 854 |
* in the sas_topology |
| 855 |
*/ |
| 856 |
static void |
| 857 |
mptsas_setup_wide_ports(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info) |
| 858 |
{ |
| 859 |
struct mptsas_portinfo_details * port_details; |
| 860 |
struct mptsas_phyinfo *phy_info, *phy_info_cmp; |
| 861 |
u64 sas_address; |
| 862 |
int i, j; |
| 863 |
|
| 864 |
mutex_lock(&ioc->sas_topology_mutex); |
| 865 |
|
| 866 |
phy_info = port_info->phy_info; |
| 867 |
for (i = 0 ; i < port_info->num_phys ; i++, phy_info++) { |
| 868 |
if (phy_info->attached.handle) |
| 869 |
continue; |
| 870 |
port_details = phy_info->port_details; |
| 871 |
if (!port_details) |
| 872 |
continue; |
| 873 |
if (port_details->num_phys < 2) |
| 874 |
continue; |
| 875 |
/* |
| 876 |
* Removing a phy from a port, letting the last |
| 877 |
* phy be removed by firmware events. |
| 878 |
*/ |
| 879 |
dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 880 |
"%s: [%p]: deleting phy = %d\n", |
| 881 |
ioc->name, __func__, port_details, i)); |
| 882 |
port_details->num_phys--; |
| 883 |
port_details->phy_bitmask &= ~ (1 << phy_info->phy_id); |
| 884 |
memset(&phy_info->attached, 0, sizeof(struct mptsas_devinfo)); |
| 885 |
if (phy_info->phy) { |
| 886 |
devtprintk(ioc, dev_printk(KERN_DEBUG, |
| 887 |
&phy_info->phy->dev, MYIOC_s_FMT |
| 888 |
"delete phy %d, phy-obj (0x%p)\n", ioc->name, |
| 889 |
phy_info->phy_id, phy_info->phy)); |
| 890 |
sas_port_delete_phy(port_details->port, phy_info->phy); |
| 891 |
} |
| 892 |
phy_info->port_details = NULL; |
| 893 |
} |
| 894 |
|
| 895 |
/* |
| 896 |
* Populate and refresh the tree |
| 897 |
*/ |
| 898 |
phy_info = port_info->phy_info; |
| 899 |
for (i = 0 ; i < port_info->num_phys ; i++, phy_info++) { |
| 900 |
sas_address = phy_info->attached.sas_address; |
| 901 |
dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "phy_id=%d sas_address=0x%018llX\n", |
| 902 |
ioc->name, i, (unsigned long long)sas_address)); |
| 903 |
if (!sas_address) |
| 904 |
continue; |
| 905 |
port_details = phy_info->port_details; |
| 906 |
/* |
| 907 |
* Forming a port |
| 908 |
*/ |
| 909 |
if (!port_details) { |
| 910 |
port_details = kzalloc_obj(struct mptsas_portinfo_details); |
| 911 |
if (!port_details) |
| 912 |
goto out; |
| 913 |
port_details->num_phys = 1; |
| 914 |
port_details->port_info = port_info; |
| 915 |
if (phy_info->phy_id < 64 ) |
| 916 |
port_details->phy_bitmask |= |
| 917 |
(1 << phy_info->phy_id); |
| 918 |
phy_info->sas_port_add_phy=1; |
| 919 |
dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "\t\tForming port\n\t\t" |
| 920 |
"phy_id=%d sas_address=0x%018llX\n", |
| 921 |
ioc->name, i, (unsigned long long)sas_address)); |
| 922 |
phy_info->port_details = port_details; |
| 923 |
} |
| 924 |
|
| 925 |
if (i == port_info->num_phys - 1) |
| 926 |
continue; |
| 927 |
phy_info_cmp = &port_info->phy_info[i + 1]; |
| 928 |
for (j = i + 1 ; j < port_info->num_phys ; j++, |
| 929 |
phy_info_cmp++) { |
| 930 |
if (!phy_info_cmp->attached.sas_address) |
| 931 |
continue; |
| 932 |
if (sas_address != phy_info_cmp->attached.sas_address) |
| 933 |
continue; |
| 934 |
if (phy_info_cmp->port_details == port_details ) |
| 935 |
continue; |
| 936 |
dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 937 |
"\t\tphy_id=%d sas_address=0x%018llX\n", |
| 938 |
ioc->name, j, (unsigned long long) |
| 939 |
phy_info_cmp->attached.sas_address)); |
| 940 |
if (phy_info_cmp->port_details) { |
| 941 |
port_details->rphy = |
| 942 |
mptsas_get_rphy(phy_info_cmp); |
| 943 |
port_details->port = |
| 944 |
mptsas_get_port(phy_info_cmp); |
| 945 |
port_details->starget = |
| 946 |
mptsas_get_starget(phy_info_cmp); |
| 947 |
port_details->num_phys = |
| 948 |
phy_info_cmp->port_details->num_phys; |
| 949 |
if (!phy_info_cmp->port_details->num_phys) |
| 950 |
kfree(phy_info_cmp->port_details); |
| 951 |
} else |
| 952 |
phy_info_cmp->sas_port_add_phy=1; |
| 953 |
/* |
| 954 |
* Adding a phy to a port |
| 955 |
*/ |
| 956 |
phy_info_cmp->port_details = port_details; |
| 957 |
if (phy_info_cmp->phy_id < 64 ) |
| 958 |
port_details->phy_bitmask |= |
| 959 |
(1 << phy_info_cmp->phy_id); |
| 960 |
port_details->num_phys++; |
| 961 |
} |
| 962 |
} |
| 963 |
|
| 964 |
out: |
| 965 |
|
| 966 |
for (i = 0; i < port_info->num_phys; i++) { |
| 967 |
port_details = port_info->phy_info[i].port_details; |
| 968 |
if (!port_details) |
| 969 |
continue; |
| 970 |
dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 971 |
"%s: [%p]: phy_id=%02d num_phys=%02d " |
| 972 |
"bitmask=0x%016llX\n", ioc->name, __func__, |
| 973 |
port_details, i, port_details->num_phys, |
| 974 |
(unsigned long long)port_details->phy_bitmask)); |
| 975 |
dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "\t\tport = %p rphy=%p\n", |
| 976 |
ioc->name, port_details->port, port_details->rphy)); |
| 977 |
} |
| 978 |
dsaswideprintk(ioc, printk("\n")); |
| 979 |
mutex_unlock(&ioc->sas_topology_mutex); |
| 980 |
} |
| 981 |
|
| 982 |
/** |
| 983 |
* mptsas_find_vtarget - find a virtual target device (FC LUN device or |
| 984 |
* SCSI target device) |
| 985 |
* |
| 986 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 987 |
* @channel: channel number |
| 988 |
* @id: Logical Target ID |
| 989 |
* |
| 990 |
**/ |
| 991 |
static VirtTarget * |
| 992 |
mptsas_find_vtarget(MPT_ADAPTER *ioc, u8 channel, u8 id) |
| 993 |
{ |
| 994 |
struct scsi_device *sdev; |
| 995 |
VirtDevice *vdevice; |
| 996 |
VirtTarget *vtarget = NULL; |
| 997 |
|
| 998 |
shost_for_each_device(sdev, ioc->sh) { |
| 999 |
vdevice = sdev->hostdata; |
| 1000 |
if ((vdevice == NULL) || |
| 1001 |
(vdevice->vtarget == NULL)) |
| 1002 |
continue; |
| 1003 |
if ((vdevice->vtarget->tflags & |
| 1004 |
MPT_TARGET_FLAGS_RAID_COMPONENT || |
| 1005 |
vdevice->vtarget->raidVolume)) |
| 1006 |
continue; |
| 1007 |
if (vdevice->vtarget->id == id && |
| 1008 |
vdevice->vtarget->channel == channel) |
| 1009 |
vtarget = vdevice->vtarget; |
| 1010 |
} |
| 1011 |
return vtarget; |
| 1012 |
} |
| 1013 |
|
| 1014 |
static void |
| 1015 |
mptsas_queue_device_delete(MPT_ADAPTER *ioc, |
| 1016 |
MpiEventDataSasDeviceStatusChange_t *sas_event_data) |
| 1017 |
{ |
| 1018 |
struct fw_event_work *fw_event; |
| 1019 |
|
| 1020 |
fw_event = kzalloc(sizeof(*fw_event) + |
| 1021 |
sizeof(MpiEventDataSasDeviceStatusChange_t), |
| 1022 |
GFP_ATOMIC); |
| 1023 |
if (!fw_event) { |
| 1024 |
printk(MYIOC_s_WARN_FMT "%s: failed at (line=%d)\n", |
| 1025 |
ioc->name, __func__, __LINE__); |
| 1026 |
return; |
| 1027 |
} |
| 1028 |
memcpy(fw_event->event_data, sas_event_data, |
| 1029 |
sizeof(MpiEventDataSasDeviceStatusChange_t)); |
| 1030 |
fw_event->event = MPI_EVENT_SAS_DEVICE_STATUS_CHANGE; |
| 1031 |
fw_event->ioc = ioc; |
| 1032 |
mptsas_add_fw_event(ioc, fw_event, msecs_to_jiffies(1)); |
| 1033 |
} |
| 1034 |
|
| 1035 |
static void |
| 1036 |
mptsas_queue_rescan(MPT_ADAPTER *ioc) |
| 1037 |
{ |
| 1038 |
struct fw_event_work *fw_event; |
| 1039 |
|
| 1040 |
fw_event = kzalloc_obj(*fw_event, GFP_ATOMIC); |
| 1041 |
if (!fw_event) { |
| 1042 |
printk(MYIOC_s_WARN_FMT "%s: failed at (line=%d)\n", |
| 1043 |
ioc->name, __func__, __LINE__); |
| 1044 |
return; |
| 1045 |
} |
| 1046 |
fw_event->event = -1; |
| 1047 |
fw_event->ioc = ioc; |
| 1048 |
mptsas_add_fw_event(ioc, fw_event, msecs_to_jiffies(1)); |
| 1049 |
} |
| 1050 |
|
| 1051 |
|
| 1052 |
/** |
| 1053 |
* mptsas_target_reset - Issues TARGET_RESET to end device using |
| 1054 |
* handshaking method |
| 1055 |
* |
| 1056 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 1057 |
* @channel: channel number |
| 1058 |
* @id: Logical Target ID for reset |
| 1059 |
* |
| 1060 |
* Return: (1) success |
| 1061 |
* (0) failure |
| 1062 |
* |
| 1063 |
**/ |
| 1064 |
static int |
| 1065 |
mptsas_target_reset(MPT_ADAPTER *ioc, u8 channel, u8 id) |
| 1066 |
{ |
| 1067 |
MPT_FRAME_HDR *mf; |
| 1068 |
SCSITaskMgmt_t *pScsiTm; |
| 1069 |
if (mpt_set_taskmgmt_in_progress_flag(ioc) != 0) |
| 1070 |
return 0; |
| 1071 |
|
| 1072 |
|
| 1073 |
mf = mpt_get_msg_frame(mptsasDeviceResetCtx, ioc); |
| 1074 |
if (mf == NULL) { |
| 1075 |
dfailprintk(ioc, printk(MYIOC_s_WARN_FMT |
| 1076 |
"%s, no msg frames @%d!!\n", ioc->name, |
| 1077 |
__func__, __LINE__)); |
| 1078 |
goto out_fail; |
| 1079 |
} |
| 1080 |
|
| 1081 |
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt request (mf=%p)\n", |
| 1082 |
ioc->name, mf)); |
| 1083 |
|
| 1084 |
/* Format the Request |
| 1085 |
*/ |
| 1086 |
pScsiTm = (SCSITaskMgmt_t *) mf; |
| 1087 |
memset (pScsiTm, 0, sizeof(SCSITaskMgmt_t)); |
| 1088 |
pScsiTm->TargetID = id; |
| 1089 |
pScsiTm->Bus = channel; |
| 1090 |
pScsiTm->Function = MPI_FUNCTION_SCSI_TASK_MGMT; |
| 1091 |
pScsiTm->TaskType = MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET; |
| 1092 |
pScsiTm->MsgFlags = MPI_SCSITASKMGMT_MSGFLAGS_LIPRESET_RESET_OPTION; |
| 1093 |
|
| 1094 |
DBG_DUMP_TM_REQUEST_FRAME(ioc, (u32 *)mf); |
| 1095 |
|
| 1096 |
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 1097 |
"TaskMgmt type=%d (sas device delete) fw_channel = %d fw_id = %d)\n", |
| 1098 |
ioc->name, MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET, channel, id)); |
| 1099 |
|
| 1100 |
mpt_put_msg_frame_hi_pri(mptsasDeviceResetCtx, ioc, mf); |
| 1101 |
|
| 1102 |
return 1; |
| 1103 |
|
| 1104 |
out_fail: |
| 1105 |
|
| 1106 |
mpt_clear_taskmgmt_in_progress_flag(ioc); |
| 1107 |
return 0; |
| 1108 |
} |
| 1109 |
|
| 1110 |
static void |
| 1111 |
mptsas_block_io_sdev(struct scsi_device *sdev, void *data) |
| 1112 |
{ |
| 1113 |
scsi_device_set_state(sdev, SDEV_BLOCK); |
| 1114 |
} |
| 1115 |
|
| 1116 |
static void |
| 1117 |
mptsas_block_io_starget(struct scsi_target *starget) |
| 1118 |
{ |
| 1119 |
if (starget) |
| 1120 |
starget_for_each_device(starget, NULL, mptsas_block_io_sdev); |
| 1121 |
} |
| 1122 |
|
| 1123 |
/** |
| 1124 |
* mptsas_target_reset_queue - queue a target reset |
| 1125 |
* |
| 1126 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 1127 |
* @sas_event_data: SAS Device Status Change Event data |
| 1128 |
* |
| 1129 |
* Receive request for TARGET_RESET after receiving a firmware |
| 1130 |
* event NOT_RESPONDING_EVENT, then put command in link list |
| 1131 |
* and queue if task_queue already in use. |
| 1132 |
* |
| 1133 |
**/ |
| 1134 |
static void |
| 1135 |
mptsas_target_reset_queue(MPT_ADAPTER *ioc, |
| 1136 |
EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *sas_event_data) |
| 1137 |
{ |
| 1138 |
MPT_SCSI_HOST *hd = shost_priv(ioc->sh); |
| 1139 |
VirtTarget *vtarget = NULL; |
| 1140 |
struct mptsas_target_reset_event *target_reset_list; |
| 1141 |
u8 id, channel; |
| 1142 |
|
| 1143 |
id = sas_event_data->TargetID; |
| 1144 |
channel = sas_event_data->Bus; |
| 1145 |
|
| 1146 |
vtarget = mptsas_find_vtarget(ioc, channel, id); |
| 1147 |
if (vtarget) { |
| 1148 |
mptsas_block_io_starget(vtarget->starget); |
| 1149 |
vtarget->deleted = 1; /* block IO */ |
| 1150 |
} |
| 1151 |
|
| 1152 |
target_reset_list = kzalloc_obj(struct mptsas_target_reset_event, |
| 1153 |
GFP_ATOMIC); |
| 1154 |
if (!target_reset_list) { |
| 1155 |
dfailprintk(ioc, printk(MYIOC_s_WARN_FMT |
| 1156 |
"%s, failed to allocate mem @%d..!!\n", |
| 1157 |
ioc->name, __func__, __LINE__)); |
| 1158 |
return; |
| 1159 |
} |
| 1160 |
|
| 1161 |
memcpy(&target_reset_list->sas_event_data, sas_event_data, |
| 1162 |
sizeof(*sas_event_data)); |
| 1163 |
list_add_tail(&target_reset_list->list, &hd->target_reset_list); |
| 1164 |
|
| 1165 |
target_reset_list->time_count = jiffies; |
| 1166 |
|
| 1167 |
if (mptsas_target_reset(ioc, channel, id)) { |
| 1168 |
target_reset_list->target_reset_issued = 1; |
| 1169 |
} |
| 1170 |
} |
| 1171 |
|
| 1172 |
/** |
| 1173 |
* mptsas_schedule_target_reset- send pending target reset |
| 1174 |
* @iocp: per adapter object |
| 1175 |
* |
| 1176 |
* This function will delete scheduled target reset from the list and |
| 1177 |
* try to send next target reset. This will be called from completion |
| 1178 |
* context of any Task management command. |
| 1179 |
*/ |
| 1180 |
|
| 1181 |
void |
| 1182 |
mptsas_schedule_target_reset(void *iocp) |
| 1183 |
{ |
| 1184 |
MPT_ADAPTER *ioc = (MPT_ADAPTER *)(iocp); |
| 1185 |
MPT_SCSI_HOST *hd = shost_priv(ioc->sh); |
| 1186 |
struct list_head *head = &hd->target_reset_list; |
| 1187 |
struct mptsas_target_reset_event *target_reset_list; |
| 1188 |
u8 id, channel; |
| 1189 |
/* |
| 1190 |
* issue target reset to next device in the queue |
| 1191 |
*/ |
| 1192 |
|
| 1193 |
if (list_empty(head)) |
| 1194 |
return; |
| 1195 |
|
| 1196 |
target_reset_list = list_entry(head->next, |
| 1197 |
struct mptsas_target_reset_event, list); |
| 1198 |
|
| 1199 |
id = target_reset_list->sas_event_data.TargetID; |
| 1200 |
channel = target_reset_list->sas_event_data.Bus; |
| 1201 |
target_reset_list->time_count = jiffies; |
| 1202 |
|
| 1203 |
if (mptsas_target_reset(ioc, channel, id)) |
| 1204 |
target_reset_list->target_reset_issued = 1; |
| 1205 |
return; |
| 1206 |
} |
| 1207 |
|
| 1208 |
|
| 1209 |
/** |
| 1210 |
* mptsas_taskmgmt_complete - complete SAS task management function |
| 1211 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 1212 |
* @mf: MPT message frame |
| 1213 |
* @mr: SCSI Task Management Reply structure ptr (may be %NULL) |
| 1214 |
* |
| 1215 |
* Completion for TARGET_RESET after NOT_RESPONDING_EVENT, enable work |
| 1216 |
* queue to finish off removing device from upper layers, then send next |
| 1217 |
* TARGET_RESET in the queue. |
| 1218 |
**/ |
| 1219 |
static int |
| 1220 |
mptsas_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr) |
| 1221 |
{ |
| 1222 |
MPT_SCSI_HOST *hd = shost_priv(ioc->sh); |
| 1223 |
struct list_head *head = &hd->target_reset_list; |
| 1224 |
u8 id, channel; |
| 1225 |
struct mptsas_target_reset_event *target_reset_list; |
| 1226 |
SCSITaskMgmtReply_t *pScsiTmReply; |
| 1227 |
|
| 1228 |
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt completed: " |
| 1229 |
"(mf = %p, mr = %p)\n", ioc->name, mf, mr)); |
| 1230 |
|
| 1231 |
pScsiTmReply = (SCSITaskMgmtReply_t *)mr; |
| 1232 |
if (!pScsiTmReply) |
| 1233 |
return 0; |
| 1234 |
|
| 1235 |
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 1236 |
"\tTaskMgmt completed: fw_channel = %d, fw_id = %d,\n" |
| 1237 |
"\ttask_type = 0x%02X, iocstatus = 0x%04X " |
| 1238 |
"loginfo = 0x%08X,\n\tresponse_code = 0x%02X, " |
| 1239 |
"term_cmnds = %d\n", ioc->name, |
| 1240 |
pScsiTmReply->Bus, pScsiTmReply->TargetID, |
| 1241 |
pScsiTmReply->TaskType, |
| 1242 |
le16_to_cpu(pScsiTmReply->IOCStatus), |
| 1243 |
le32_to_cpu(pScsiTmReply->IOCLogInfo), |
| 1244 |
pScsiTmReply->ResponseCode, |
| 1245 |
le32_to_cpu(pScsiTmReply->TerminationCount))); |
| 1246 |
|
| 1247 |
if (pScsiTmReply->ResponseCode) |
| 1248 |
mptscsih_taskmgmt_response_code(ioc, |
| 1249 |
pScsiTmReply->ResponseCode); |
| 1250 |
|
| 1251 |
if (pScsiTmReply->TaskType == |
| 1252 |
MPI_SCSITASKMGMT_TASKTYPE_QUERY_TASK || pScsiTmReply->TaskType == |
| 1253 |
MPI_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET) { |
| 1254 |
ioc->taskmgmt_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD; |
| 1255 |
ioc->taskmgmt_cmds.status |= MPT_MGMT_STATUS_RF_VALID; |
| 1256 |
memcpy(ioc->taskmgmt_cmds.reply, mr, |
| 1257 |
min(MPT_DEFAULT_FRAME_SIZE, 4 * mr->u.reply.MsgLength)); |
| 1258 |
if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_PENDING) { |
| 1259 |
ioc->taskmgmt_cmds.status &= ~MPT_MGMT_STATUS_PENDING; |
| 1260 |
complete(&ioc->taskmgmt_cmds.done); |
| 1261 |
return 1; |
| 1262 |
} |
| 1263 |
return 0; |
| 1264 |
} |
| 1265 |
|
| 1266 |
mpt_clear_taskmgmt_in_progress_flag(ioc); |
| 1267 |
|
| 1268 |
if (list_empty(head)) |
| 1269 |
return 1; |
| 1270 |
|
| 1271 |
target_reset_list = list_entry(head->next, |
| 1272 |
struct mptsas_target_reset_event, list); |
| 1273 |
|
| 1274 |
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 1275 |
"TaskMgmt: completed (%d seconds)\n", |
| 1276 |
ioc->name, jiffies_to_msecs(jiffies - |
| 1277 |
target_reset_list->time_count)/1000)); |
| 1278 |
|
| 1279 |
id = pScsiTmReply->TargetID; |
| 1280 |
channel = pScsiTmReply->Bus; |
| 1281 |
target_reset_list->time_count = jiffies; |
| 1282 |
|
| 1283 |
/* |
| 1284 |
* retry target reset |
| 1285 |
*/ |
| 1286 |
if (!target_reset_list->target_reset_issued) { |
| 1287 |
if (mptsas_target_reset(ioc, channel, id)) |
| 1288 |
target_reset_list->target_reset_issued = 1; |
| 1289 |
return 1; |
| 1290 |
} |
| 1291 |
|
| 1292 |
/* |
| 1293 |
* enable work queue to remove device from upper layers |
| 1294 |
*/ |
| 1295 |
list_del(&target_reset_list->list); |
| 1296 |
if (!ioc->fw_events_off) |
| 1297 |
mptsas_queue_device_delete(ioc, |
| 1298 |
&target_reset_list->sas_event_data); |
| 1299 |
|
| 1300 |
|
| 1301 |
ioc->schedule_target_reset(ioc); |
| 1302 |
|
| 1303 |
return 1; |
| 1304 |
} |
| 1305 |
|
| 1306 |
/** |
| 1307 |
* mptsas_ioc_reset - issue an IOC reset for this reset phase |
| 1308 |
* |
| 1309 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 1310 |
* @reset_phase: id of phase of reset |
| 1311 |
* |
| 1312 |
**/ |
| 1313 |
static int |
| 1314 |
mptsas_ioc_reset(MPT_ADAPTER *ioc, int reset_phase) |
| 1315 |
{ |
| 1316 |
MPT_SCSI_HOST *hd; |
| 1317 |
int rc; |
| 1318 |
|
| 1319 |
rc = mptscsih_ioc_reset(ioc, reset_phase); |
| 1320 |
if ((ioc->bus_type != SAS) || (!rc)) |
| 1321 |
return rc; |
| 1322 |
|
| 1323 |
hd = shost_priv(ioc->sh); |
| 1324 |
if (!hd->ioc) |
| 1325 |
goto out; |
| 1326 |
|
| 1327 |
switch (reset_phase) { |
| 1328 |
case MPT_IOC_SETUP_RESET: |
| 1329 |
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 1330 |
"%s: MPT_IOC_SETUP_RESET\n", ioc->name, __func__)); |
| 1331 |
mptsas_fw_event_off(ioc); |
| 1332 |
break; |
| 1333 |
case MPT_IOC_PRE_RESET: |
| 1334 |
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 1335 |
"%s: MPT_IOC_PRE_RESET\n", ioc->name, __func__)); |
| 1336 |
break; |
| 1337 |
case MPT_IOC_POST_RESET: |
| 1338 |
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 1339 |
"%s: MPT_IOC_POST_RESET\n", ioc->name, __func__)); |
| 1340 |
if (ioc->sas_mgmt.status & MPT_MGMT_STATUS_PENDING) { |
| 1341 |
ioc->sas_mgmt.status |= MPT_MGMT_STATUS_DID_IOCRESET; |
| 1342 |
complete(&ioc->sas_mgmt.done); |
| 1343 |
} |
| 1344 |
mptsas_cleanup_fw_event_q(ioc); |
| 1345 |
mptsas_queue_rescan(ioc); |
| 1346 |
break; |
| 1347 |
default: |
| 1348 |
break; |
| 1349 |
} |
| 1350 |
|
| 1351 |
out: |
| 1352 |
return rc; |
| 1353 |
} |
| 1354 |
|
| 1355 |
|
| 1356 |
/** |
| 1357 |
* enum device_state - TUR device state |
| 1358 |
* @DEVICE_RETRY: need to retry the TUR |
| 1359 |
* @DEVICE_ERROR: TUR return error, don't add device |
| 1360 |
* @DEVICE_READY: device can be added |
| 1361 |
* |
| 1362 |
*/ |
| 1363 |
enum device_state{ |
| 1364 |
DEVICE_RETRY, |
| 1365 |
DEVICE_ERROR, |
| 1366 |
DEVICE_READY, |
| 1367 |
}; |
| 1368 |
|
| 1369 |
static int |
| 1370 |
mptsas_sas_enclosure_pg0(MPT_ADAPTER *ioc, struct mptsas_enclosure *enclosure, |
| 1371 |
u32 form, u32 form_specific) |
| 1372 |
{ |
| 1373 |
ConfigExtendedPageHeader_t hdr; |
| 1374 |
CONFIGPARMS cfg; |
| 1375 |
SasEnclosurePage0_t *buffer; |
| 1376 |
dma_addr_t dma_handle; |
| 1377 |
int error; |
| 1378 |
__le64 le_identifier; |
| 1379 |
|
| 1380 |
memset(&hdr, 0, sizeof(hdr)); |
| 1381 |
hdr.PageVersion = MPI_SASENCLOSURE0_PAGEVERSION; |
| 1382 |
hdr.PageNumber = 0; |
| 1383 |
hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED; |
| 1384 |
hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_ENCLOSURE; |
| 1385 |
|
| 1386 |
cfg.cfghdr.ehdr = &hdr; |
| 1387 |
cfg.physAddr = -1; |
| 1388 |
cfg.pageAddr = form + form_specific; |
| 1389 |
cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; |
| 1390 |
cfg.dir = 0; /* read */ |
| 1391 |
cfg.timeout = SAS_CONFIG_PAGE_TIMEOUT; |
| 1392 |
|
| 1393 |
error = mpt_config(ioc, &cfg); |
| 1394 |
if (error) |
| 1395 |
goto out; |
| 1396 |
if (!hdr.ExtPageLength) { |
| 1397 |
error = -ENXIO; |
| 1398 |
goto out; |
| 1399 |
} |
| 1400 |
|
| 1401 |
buffer = dma_alloc_coherent(&ioc->pcidev->dev, hdr.ExtPageLength * 4, |
| 1402 |
&dma_handle, GFP_KERNEL); |
| 1403 |
if (!buffer) { |
| 1404 |
error = -ENOMEM; |
| 1405 |
goto out; |
| 1406 |
} |
| 1407 |
|
| 1408 |
cfg.physAddr = dma_handle; |
| 1409 |
cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; |
| 1410 |
|
| 1411 |
error = mpt_config(ioc, &cfg); |
| 1412 |
if (error) |
| 1413 |
goto out_free_consistent; |
| 1414 |
|
| 1415 |
/* save config data */ |
| 1416 |
memcpy(&le_identifier, &buffer->EnclosureLogicalID, sizeof(__le64)); |
| 1417 |
enclosure->enclosure_logical_id = le64_to_cpu(le_identifier); |
| 1418 |
enclosure->enclosure_handle = le16_to_cpu(buffer->EnclosureHandle); |
| 1419 |
enclosure->flags = le16_to_cpu(buffer->Flags); |
| 1420 |
enclosure->num_slot = le16_to_cpu(buffer->NumSlots); |
| 1421 |
enclosure->start_slot = le16_to_cpu(buffer->StartSlot); |
| 1422 |
enclosure->start_id = buffer->StartTargetID; |
| 1423 |
enclosure->start_channel = buffer->StartBus; |
| 1424 |
enclosure->sep_id = buffer->SEPTargetID; |
| 1425 |
enclosure->sep_channel = buffer->SEPBus; |
| 1426 |
|
| 1427 |
out_free_consistent: |
| 1428 |
dma_free_coherent(&ioc->pcidev->dev, hdr.ExtPageLength * 4, buffer, |
| 1429 |
dma_handle); |
| 1430 |
out: |
| 1431 |
return error; |
| 1432 |
} |
| 1433 |
|
| 1434 |
/** |
| 1435 |
* mptsas_add_end_device - report a new end device to sas transport layer |
| 1436 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 1437 |
* @phy_info: describes attached device |
| 1438 |
* |
| 1439 |
* return (0) success (1) failure |
| 1440 |
* |
| 1441 |
**/ |
| 1442 |
static int |
| 1443 |
mptsas_add_end_device(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info) |
| 1444 |
{ |
| 1445 |
struct sas_rphy *rphy; |
| 1446 |
struct sas_port *port; |
| 1447 |
struct sas_identify identify; |
| 1448 |
char *ds = NULL; |
| 1449 |
u8 fw_id; |
| 1450 |
|
| 1451 |
if (!phy_info) { |
| 1452 |
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT |
| 1453 |
"%s: exit at line=%d\n", ioc->name, |
| 1454 |
__func__, __LINE__)); |
| 1455 |
return 1; |
| 1456 |
} |
| 1457 |
|
| 1458 |
fw_id = phy_info->attached.id; |
| 1459 |
|
| 1460 |
if (mptsas_get_rphy(phy_info)) { |
| 1461 |
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT |
| 1462 |
"%s: fw_id=%d exit at line=%d\n", ioc->name, |
| 1463 |
__func__, fw_id, __LINE__)); |
| 1464 |
return 2; |
| 1465 |
} |
| 1466 |
|
| 1467 |
port = mptsas_get_port(phy_info); |
| 1468 |
if (!port) { |
| 1469 |
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT |
| 1470 |
"%s: fw_id=%d exit at line=%d\n", ioc->name, |
| 1471 |
__func__, fw_id, __LINE__)); |
| 1472 |
return 3; |
| 1473 |
} |
| 1474 |
|
| 1475 |
if (phy_info->attached.device_info & |
| 1476 |
MPI_SAS_DEVICE_INFO_SSP_TARGET) |
| 1477 |
ds = "ssp"; |
| 1478 |
if (phy_info->attached.device_info & |
| 1479 |
MPI_SAS_DEVICE_INFO_STP_TARGET) |
| 1480 |
ds = "stp"; |
| 1481 |
if (phy_info->attached.device_info & |
| 1482 |
MPI_SAS_DEVICE_INFO_SATA_DEVICE) |
| 1483 |
ds = "sata"; |
| 1484 |
|
| 1485 |
printk(MYIOC_s_INFO_FMT "attaching %s device: fw_channel %d, fw_id %d," |
| 1486 |
" phy %d, sas_addr 0x%llx\n", ioc->name, ds, |
| 1487 |
phy_info->attached.channel, phy_info->attached.id, |
| 1488 |
phy_info->attached.phy_id, (unsigned long long) |
| 1489 |
phy_info->attached.sas_address); |
| 1490 |
|
| 1491 |
mptsas_parse_device_info(&identify, &phy_info->attached); |
| 1492 |
rphy = sas_end_device_alloc(port); |
| 1493 |
if (!rphy) { |
| 1494 |
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT |
| 1495 |
"%s: fw_id=%d exit at line=%d\n", ioc->name, |
| 1496 |
__func__, fw_id, __LINE__)); |
| 1497 |
return 5; /* non-fatal: an rphy can be added later */ |
| 1498 |
} |
| 1499 |
|
| 1500 |
rphy->identify = identify; |
| 1501 |
if (sas_rphy_add(rphy)) { |
| 1502 |
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT |
| 1503 |
"%s: fw_id=%d exit at line=%d\n", ioc->name, |
| 1504 |
__func__, fw_id, __LINE__)); |
| 1505 |
sas_rphy_free(rphy); |
| 1506 |
return 6; |
| 1507 |
} |
| 1508 |
mptsas_set_rphy(ioc, phy_info, rphy); |
| 1509 |
return 0; |
| 1510 |
} |
| 1511 |
|
| 1512 |
/** |
| 1513 |
* mptsas_del_end_device - report a deleted end device to sas transport layer |
| 1514 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 1515 |
* @phy_info: describes attached device |
| 1516 |
* |
| 1517 |
**/ |
| 1518 |
static void |
| 1519 |
mptsas_del_end_device(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info) |
| 1520 |
{ |
| 1521 |
struct sas_rphy *rphy; |
| 1522 |
struct sas_port *port; |
| 1523 |
struct mptsas_portinfo *port_info; |
| 1524 |
struct mptsas_phyinfo *phy_info_parent; |
| 1525 |
int i; |
| 1526 |
char *ds = NULL; |
| 1527 |
u8 fw_id; |
| 1528 |
u64 sas_address; |
| 1529 |
|
| 1530 |
if (!phy_info) |
| 1531 |
return; |
| 1532 |
|
| 1533 |
fw_id = phy_info->attached.id; |
| 1534 |
sas_address = phy_info->attached.sas_address; |
| 1535 |
|
| 1536 |
if (!phy_info->port_details) { |
| 1537 |
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT |
| 1538 |
"%s: fw_id=%d exit at line=%d\n", ioc->name, |
| 1539 |
__func__, fw_id, __LINE__)); |
| 1540 |
return; |
| 1541 |
} |
| 1542 |
rphy = mptsas_get_rphy(phy_info); |
| 1543 |
if (!rphy) { |
| 1544 |
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT |
| 1545 |
"%s: fw_id=%d exit at line=%d\n", ioc->name, |
| 1546 |
__func__, fw_id, __LINE__)); |
| 1547 |
return; |
| 1548 |
} |
| 1549 |
|
| 1550 |
if (phy_info->attached.device_info & MPI_SAS_DEVICE_INFO_SSP_INITIATOR |
| 1551 |
|| phy_info->attached.device_info |
| 1552 |
& MPI_SAS_DEVICE_INFO_SMP_INITIATOR |
| 1553 |
|| phy_info->attached.device_info |
| 1554 |
& MPI_SAS_DEVICE_INFO_STP_INITIATOR) |
| 1555 |
ds = "initiator"; |
| 1556 |
if (phy_info->attached.device_info & |
| 1557 |
MPI_SAS_DEVICE_INFO_SSP_TARGET) |
| 1558 |
ds = "ssp"; |
| 1559 |
if (phy_info->attached.device_info & |
| 1560 |
MPI_SAS_DEVICE_INFO_STP_TARGET) |
| 1561 |
ds = "stp"; |
| 1562 |
if (phy_info->attached.device_info & |
| 1563 |
MPI_SAS_DEVICE_INFO_SATA_DEVICE) |
| 1564 |
ds = "sata"; |
| 1565 |
|
| 1566 |
dev_printk(KERN_DEBUG, &rphy->dev, MYIOC_s_FMT |
| 1567 |
"removing %s device: fw_channel %d, fw_id %d, phy %d," |
| 1568 |
"sas_addr 0x%llx\n", ioc->name, ds, phy_info->attached.channel, |
| 1569 |
phy_info->attached.id, phy_info->attached.phy_id, |
| 1570 |
(unsigned long long) sas_address); |
| 1571 |
|
| 1572 |
port = mptsas_get_port(phy_info); |
| 1573 |
if (!port) { |
| 1574 |
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT |
| 1575 |
"%s: fw_id=%d exit at line=%d\n", ioc->name, |
| 1576 |
__func__, fw_id, __LINE__)); |
| 1577 |
return; |
| 1578 |
} |
| 1579 |
port_info = phy_info->portinfo; |
| 1580 |
phy_info_parent = port_info->phy_info; |
| 1581 |
for (i = 0; i < port_info->num_phys; i++, phy_info_parent++) { |
| 1582 |
if (!phy_info_parent->phy) |
| 1583 |
continue; |
| 1584 |
if (phy_info_parent->attached.sas_address != |
| 1585 |
sas_address) |
| 1586 |
continue; |
| 1587 |
dev_printk(KERN_DEBUG, &phy_info_parent->phy->dev, |
| 1588 |
MYIOC_s_FMT "delete phy %d, phy-obj (0x%p)\n", |
| 1589 |
ioc->name, phy_info_parent->phy_id, |
| 1590 |
phy_info_parent->phy); |
| 1591 |
sas_port_delete_phy(port, phy_info_parent->phy); |
| 1592 |
} |
| 1593 |
|
| 1594 |
dev_printk(KERN_DEBUG, &port->dev, MYIOC_s_FMT |
| 1595 |
"delete port %d, sas_addr (0x%llx)\n", ioc->name, |
| 1596 |
port->port_identifier, (unsigned long long)sas_address); |
| 1597 |
sas_port_delete(port); |
| 1598 |
mptsas_set_port(ioc, phy_info, NULL); |
| 1599 |
mptsas_port_delete(ioc, phy_info->port_details); |
| 1600 |
} |
| 1601 |
|
| 1602 |
static struct mptsas_phyinfo * |
| 1603 |
mptsas_refreshing_device_handles(MPT_ADAPTER *ioc, |
| 1604 |
struct mptsas_devinfo *sas_device) |
| 1605 |
{ |
| 1606 |
struct mptsas_phyinfo *phy_info; |
| 1607 |
struct mptsas_portinfo *port_info; |
| 1608 |
int i; |
| 1609 |
|
| 1610 |
phy_info = mptsas_find_phyinfo_by_sas_address(ioc, |
| 1611 |
sas_device->sas_address); |
| 1612 |
if (!phy_info) |
| 1613 |
goto out; |
| 1614 |
port_info = phy_info->portinfo; |
| 1615 |
if (!port_info) |
| 1616 |
goto out; |
| 1617 |
mutex_lock(&ioc->sas_topology_mutex); |
| 1618 |
for (i = 0; i < port_info->num_phys; i++) { |
| 1619 |
if (port_info->phy_info[i].attached.sas_address != |
| 1620 |
sas_device->sas_address) |
| 1621 |
continue; |
| 1622 |
port_info->phy_info[i].attached.channel = sas_device->channel; |
| 1623 |
port_info->phy_info[i].attached.id = sas_device->id; |
| 1624 |
port_info->phy_info[i].attached.sas_address = |
| 1625 |
sas_device->sas_address; |
| 1626 |
port_info->phy_info[i].attached.handle = sas_device->handle; |
| 1627 |
port_info->phy_info[i].attached.handle_parent = |
| 1628 |
sas_device->handle_parent; |
| 1629 |
port_info->phy_info[i].attached.handle_enclosure = |
| 1630 |
sas_device->handle_enclosure; |
| 1631 |
} |
| 1632 |
mutex_unlock(&ioc->sas_topology_mutex); |
| 1633 |
out: |
| 1634 |
return phy_info; |
| 1635 |
} |
| 1636 |
|
| 1637 |
/** |
| 1638 |
* mptsas_firmware_event_work - work thread for processing fw events |
| 1639 |
* @work: work queue payload containing info describing the event |
| 1640 |
* Context: user |
| 1641 |
* |
| 1642 |
*/ |
| 1643 |
static void |
| 1644 |
mptsas_firmware_event_work(struct work_struct *work) |
| 1645 |
{ |
| 1646 |
struct fw_event_work *fw_event = |
| 1647 |
container_of(work, struct fw_event_work, work.work); |
| 1648 |
MPT_ADAPTER *ioc = fw_event->ioc; |
| 1649 |
|
| 1650 |
/* special rescan topology handling */ |
| 1651 |
if (fw_event->event == -1) { |
| 1652 |
if (ioc->in_rescan) { |
| 1653 |
devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 1654 |
"%s: rescan ignored as it is in progress\n", |
| 1655 |
ioc->name, __func__)); |
| 1656 |
return; |
| 1657 |
} |
| 1658 |
devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: rescan after " |
| 1659 |
"reset\n", ioc->name, __func__)); |
| 1660 |
ioc->in_rescan = 1; |
| 1661 |
mptsas_not_responding_devices(ioc); |
| 1662 |
mptsas_scan_sas_topology(ioc); |
| 1663 |
ioc->in_rescan = 0; |
| 1664 |
mptsas_free_fw_event(ioc, fw_event); |
| 1665 |
mptsas_fw_event_on(ioc); |
| 1666 |
return; |
| 1667 |
} |
| 1668 |
|
| 1669 |
/* events handling turned off during host reset */ |
| 1670 |
if (ioc->fw_events_off) { |
| 1671 |
mptsas_free_fw_event(ioc, fw_event); |
| 1672 |
return; |
| 1673 |
} |
| 1674 |
|
| 1675 |
devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: fw_event=(0x%p), " |
| 1676 |
"event = (0x%02x)\n", ioc->name, __func__, fw_event, |
| 1677 |
(fw_event->event & 0xFF))); |
| 1678 |
|
| 1679 |
switch (fw_event->event) { |
| 1680 |
case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE: |
| 1681 |
mptsas_send_sas_event(fw_event); |
| 1682 |
break; |
| 1683 |
case MPI_EVENT_INTEGRATED_RAID: |
| 1684 |
mptsas_send_raid_event(fw_event); |
| 1685 |
break; |
| 1686 |
case MPI_EVENT_IR2: |
| 1687 |
mptsas_send_ir2_event(fw_event); |
| 1688 |
break; |
| 1689 |
case MPI_EVENT_PERSISTENT_TABLE_FULL: |
| 1690 |
mptbase_sas_persist_operation(ioc, |
| 1691 |
MPI_SAS_OP_CLEAR_NOT_PRESENT); |
| 1692 |
mptsas_free_fw_event(ioc, fw_event); |
| 1693 |
break; |
| 1694 |
case MPI_EVENT_SAS_BROADCAST_PRIMITIVE: |
| 1695 |
mptsas_broadcast_primitive_work(fw_event); |
| 1696 |
break; |
| 1697 |
case MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE: |
| 1698 |
mptsas_send_expander_event(fw_event); |
| 1699 |
break; |
| 1700 |
case MPI_EVENT_SAS_PHY_LINK_STATUS: |
| 1701 |
mptsas_send_link_status_event(fw_event); |
| 1702 |
break; |
| 1703 |
case MPI_EVENT_QUEUE_FULL: |
| 1704 |
mptsas_handle_queue_full_event(fw_event); |
| 1705 |
break; |
| 1706 |
} |
| 1707 |
} |
| 1708 |
|
| 1709 |
|
| 1710 |
|
| 1711 |
static int |
| 1712 |
mptsas_sdev_configure(struct scsi_device *sdev, struct queue_limits *lim) |
| 1713 |
{ |
| 1714 |
struct Scsi_Host *host = sdev->host; |
| 1715 |
MPT_SCSI_HOST *hd = shost_priv(host); |
| 1716 |
MPT_ADAPTER *ioc = hd->ioc; |
| 1717 |
VirtDevice *vdevice = sdev->hostdata; |
| 1718 |
|
| 1719 |
if (vdevice->vtarget->deleted) { |
| 1720 |
sdev_printk(KERN_INFO, sdev, "clearing deleted flag\n"); |
| 1721 |
vdevice->vtarget->deleted = 0; |
| 1722 |
} |
| 1723 |
|
| 1724 |
/* |
| 1725 |
* RAID volumes placed beyond the last expected port. |
| 1726 |
* Ignore sending sas mode pages in that case.. |
| 1727 |
*/ |
| 1728 |
if (sdev->channel == MPTSAS_RAID_CHANNEL) { |
| 1729 |
mptsas_add_device_component_starget_ir(ioc, scsi_target(sdev)); |
| 1730 |
goto out; |
| 1731 |
} |
| 1732 |
|
| 1733 |
sas_read_port_mode_page(sdev); |
| 1734 |
|
| 1735 |
mptsas_add_device_component_starget(ioc, scsi_target(sdev)); |
| 1736 |
|
| 1737 |
out: |
| 1738 |
return mptscsih_sdev_configure(sdev, lim); |
| 1739 |
} |
| 1740 |
|
| 1741 |
static int |
| 1742 |
mptsas_target_alloc(struct scsi_target *starget) |
| 1743 |
{ |
| 1744 |
struct Scsi_Host *host = dev_to_shost(&starget->dev); |
| 1745 |
MPT_SCSI_HOST *hd = shost_priv(host); |
| 1746 |
VirtTarget *vtarget; |
| 1747 |
u8 id, channel; |
| 1748 |
struct sas_rphy *rphy; |
| 1749 |
struct mptsas_portinfo *p; |
| 1750 |
int i; |
| 1751 |
MPT_ADAPTER *ioc = hd->ioc; |
| 1752 |
|
| 1753 |
vtarget = kzalloc_obj(VirtTarget); |
| 1754 |
if (!vtarget) |
| 1755 |
return -ENOMEM; |
| 1756 |
|
| 1757 |
vtarget->starget = starget; |
| 1758 |
vtarget->ioc_id = ioc->id; |
| 1759 |
vtarget->tflags = MPT_TARGET_FLAGS_Q_YES; |
| 1760 |
id = starget->id; |
| 1761 |
channel = 0; |
| 1762 |
|
| 1763 |
/* |
| 1764 |
* RAID volumes placed beyond the last expected port. |
| 1765 |
*/ |
| 1766 |
if (starget->channel == MPTSAS_RAID_CHANNEL) { |
| 1767 |
if (!ioc->raid_data.pIocPg2) { |
| 1768 |
kfree(vtarget); |
| 1769 |
return -ENXIO; |
| 1770 |
} |
| 1771 |
for (i = 0; i < ioc->raid_data.pIocPg2->NumActiveVolumes; i++) { |
| 1772 |
if (id == ioc->raid_data.pIocPg2-> |
| 1773 |
RaidVolume[i].VolumeID) { |
| 1774 |
channel = ioc->raid_data.pIocPg2-> |
| 1775 |
RaidVolume[i].VolumeBus; |
| 1776 |
} |
| 1777 |
} |
| 1778 |
vtarget->raidVolume = 1; |
| 1779 |
goto out; |
| 1780 |
} |
| 1781 |
|
| 1782 |
rphy = dev_to_rphy(starget->dev.parent); |
| 1783 |
mutex_lock(&ioc->sas_topology_mutex); |
| 1784 |
list_for_each_entry(p, &ioc->sas_topology, list) { |
| 1785 |
for (i = 0; i < p->num_phys; i++) { |
| 1786 |
if (p->phy_info[i].attached.sas_address != |
| 1787 |
rphy->identify.sas_address) |
| 1788 |
continue; |
| 1789 |
id = p->phy_info[i].attached.id; |
| 1790 |
channel = p->phy_info[i].attached.channel; |
| 1791 |
mptsas_set_starget(&p->phy_info[i], starget); |
| 1792 |
|
| 1793 |
/* |
| 1794 |
* Exposing hidden raid components |
| 1795 |
*/ |
| 1796 |
if (mptscsih_is_phys_disk(ioc, channel, id)) { |
| 1797 |
id = mptscsih_raid_id_to_num(ioc, |
| 1798 |
channel, id); |
| 1799 |
vtarget->tflags |= |
| 1800 |
MPT_TARGET_FLAGS_RAID_COMPONENT; |
| 1801 |
p->phy_info[i].attached.phys_disk_num = id; |
| 1802 |
} |
| 1803 |
mutex_unlock(&ioc->sas_topology_mutex); |
| 1804 |
goto out; |
| 1805 |
} |
| 1806 |
} |
| 1807 |
mutex_unlock(&ioc->sas_topology_mutex); |
| 1808 |
|
| 1809 |
kfree(vtarget); |
| 1810 |
return -ENXIO; |
| 1811 |
|
| 1812 |
out: |
| 1813 |
vtarget->id = id; |
| 1814 |
vtarget->channel = channel; |
| 1815 |
starget->hostdata = vtarget; |
| 1816 |
return 0; |
| 1817 |
} |
| 1818 |
|
| 1819 |
static void |
| 1820 |
mptsas_target_destroy(struct scsi_target *starget) |
| 1821 |
{ |
| 1822 |
struct Scsi_Host *host = dev_to_shost(&starget->dev); |
| 1823 |
MPT_SCSI_HOST *hd = shost_priv(host); |
| 1824 |
struct sas_rphy *rphy; |
| 1825 |
struct mptsas_portinfo *p; |
| 1826 |
int i; |
| 1827 |
MPT_ADAPTER *ioc = hd->ioc; |
| 1828 |
VirtTarget *vtarget; |
| 1829 |
|
| 1830 |
if (!starget->hostdata) |
| 1831 |
return; |
| 1832 |
|
| 1833 |
vtarget = starget->hostdata; |
| 1834 |
|
| 1835 |
mptsas_del_device_component_by_os(ioc, starget->channel, |
| 1836 |
starget->id); |
| 1837 |
|
| 1838 |
|
| 1839 |
if (starget->channel == MPTSAS_RAID_CHANNEL) |
| 1840 |
goto out; |
| 1841 |
|
| 1842 |
rphy = dev_to_rphy(starget->dev.parent); |
| 1843 |
list_for_each_entry(p, &ioc->sas_topology, list) { |
| 1844 |
for (i = 0; i < p->num_phys; i++) { |
| 1845 |
if (p->phy_info[i].attached.sas_address != |
| 1846 |
rphy->identify.sas_address) |
| 1847 |
continue; |
| 1848 |
|
| 1849 |
starget_printk(KERN_INFO, starget, MYIOC_s_FMT |
| 1850 |
"delete device: fw_channel %d, fw_id %d, phy %d, " |
| 1851 |
"sas_addr 0x%llx\n", ioc->name, |
| 1852 |
p->phy_info[i].attached.channel, |
| 1853 |
p->phy_info[i].attached.id, |
| 1854 |
p->phy_info[i].attached.phy_id, (unsigned long long) |
| 1855 |
p->phy_info[i].attached.sas_address); |
| 1856 |
|
| 1857 |
mptsas_set_starget(&p->phy_info[i], NULL); |
| 1858 |
} |
| 1859 |
} |
| 1860 |
|
| 1861 |
out: |
| 1862 |
vtarget->starget = NULL; |
| 1863 |
kfree(starget->hostdata); |
| 1864 |
starget->hostdata = NULL; |
| 1865 |
} |
| 1866 |
|
| 1867 |
|
| 1868 |
static int |
| 1869 |
mptsas_sdev_init(struct scsi_device *sdev) |
| 1870 |
{ |
| 1871 |
struct Scsi_Host *host = sdev->host; |
| 1872 |
MPT_SCSI_HOST *hd = shost_priv(host); |
| 1873 |
struct sas_rphy *rphy; |
| 1874 |
struct mptsas_portinfo *p; |
| 1875 |
VirtDevice *vdevice; |
| 1876 |
struct scsi_target *starget; |
| 1877 |
int i; |
| 1878 |
MPT_ADAPTER *ioc = hd->ioc; |
| 1879 |
|
| 1880 |
vdevice = kzalloc_obj(VirtDevice); |
| 1881 |
if (!vdevice) { |
| 1882 |
printk(MYIOC_s_ERR_FMT "sdev_init kzalloc(%zd) FAILED!\n", |
| 1883 |
ioc->name, sizeof(VirtDevice)); |
| 1884 |
return -ENOMEM; |
| 1885 |
} |
| 1886 |
starget = scsi_target(sdev); |
| 1887 |
vdevice->vtarget = starget->hostdata; |
| 1888 |
|
| 1889 |
if (sdev->channel == MPTSAS_RAID_CHANNEL) |
| 1890 |
goto out; |
| 1891 |
|
| 1892 |
rphy = dev_to_rphy(sdev->sdev_target->dev.parent); |
| 1893 |
mutex_lock(&ioc->sas_topology_mutex); |
| 1894 |
list_for_each_entry(p, &ioc->sas_topology, list) { |
| 1895 |
for (i = 0; i < p->num_phys; i++) { |
| 1896 |
if (p->phy_info[i].attached.sas_address != |
| 1897 |
rphy->identify.sas_address) |
| 1898 |
continue; |
| 1899 |
vdevice->lun = sdev->lun; |
| 1900 |
/* |
| 1901 |
* Exposing hidden raid components |
| 1902 |
*/ |
| 1903 |
if (mptscsih_is_phys_disk(ioc, |
| 1904 |
p->phy_info[i].attached.channel, |
| 1905 |
p->phy_info[i].attached.id)) |
| 1906 |
sdev->no_uld_attach = 1; |
| 1907 |
mutex_unlock(&ioc->sas_topology_mutex); |
| 1908 |
goto out; |
| 1909 |
} |
| 1910 |
} |
| 1911 |
mutex_unlock(&ioc->sas_topology_mutex); |
| 1912 |
|
| 1913 |
kfree(vdevice); |
| 1914 |
return -ENXIO; |
| 1915 |
|
| 1916 |
out: |
| 1917 |
vdevice->vtarget->num_luns++; |
| 1918 |
sdev->hostdata = vdevice; |
| 1919 |
return 0; |
| 1920 |
} |
| 1921 |
|
| 1922 |
static enum scsi_qc_status mptsas_qcmd(struct Scsi_Host *shost, |
| 1923 |
struct scsi_cmnd *SCpnt) |
| 1924 |
{ |
| 1925 |
MPT_SCSI_HOST *hd; |
| 1926 |
MPT_ADAPTER *ioc; |
| 1927 |
VirtDevice *vdevice = SCpnt->device->hostdata; |
| 1928 |
|
| 1929 |
if (!vdevice || !vdevice->vtarget || vdevice->vtarget->deleted) { |
| 1930 |
SCpnt->result = DID_NO_CONNECT << 16; |
| 1931 |
scsi_done(SCpnt); |
| 1932 |
return 0; |
| 1933 |
} |
| 1934 |
|
| 1935 |
hd = shost_priv(shost); |
| 1936 |
ioc = hd->ioc; |
| 1937 |
|
| 1938 |
if (ioc->sas_discovery_quiesce_io) |
| 1939 |
return SCSI_MLQUEUE_HOST_BUSY; |
| 1940 |
|
| 1941 |
if (ioc->debug_level & MPT_DEBUG_SCSI) |
| 1942 |
scsi_print_command(SCpnt); |
| 1943 |
|
| 1944 |
return mptscsih_qcmd(SCpnt); |
| 1945 |
} |
| 1946 |
|
| 1947 |
/** |
| 1948 |
* mptsas_eh_timed_out - resets the scsi_cmnd timeout |
| 1949 |
* if the device under question is currently in the |
| 1950 |
* device removal delay. |
| 1951 |
* @sc: scsi command that the midlayer is about to time out |
| 1952 |
* |
| 1953 |
**/ |
| 1954 |
static enum scsi_timeout_action mptsas_eh_timed_out(struct scsi_cmnd *sc) |
| 1955 |
{ |
| 1956 |
MPT_SCSI_HOST *hd; |
| 1957 |
MPT_ADAPTER *ioc; |
| 1958 |
VirtDevice *vdevice; |
| 1959 |
enum scsi_timeout_action rc = SCSI_EH_NOT_HANDLED; |
| 1960 |
|
| 1961 |
hd = shost_priv(sc->device->host); |
| 1962 |
if (hd == NULL) { |
| 1963 |
printk(KERN_ERR MYNAM ": %s: Can't locate host! (sc=%p)\n", |
| 1964 |
__func__, sc); |
| 1965 |
goto done; |
| 1966 |
} |
| 1967 |
|
| 1968 |
ioc = hd->ioc; |
| 1969 |
if (ioc->bus_type != SAS) { |
| 1970 |
printk(KERN_ERR MYNAM ": %s: Wrong bus type (sc=%p)\n", |
| 1971 |
__func__, sc); |
| 1972 |
goto done; |
| 1973 |
} |
| 1974 |
|
| 1975 |
/* In case if IOC is in reset from internal context. |
| 1976 |
* Do not execute EEH for the same IOC. SML should to reset timer. |
| 1977 |
*/ |
| 1978 |
if (ioc->ioc_reset_in_progress) { |
| 1979 |
dtmprintk(ioc, printk(MYIOC_s_WARN_FMT ": %s: ioc is in reset," |
| 1980 |
"SML need to reset the timer (sc=%p)\n", |
| 1981 |
ioc->name, __func__, sc)); |
| 1982 |
rc = SCSI_EH_RESET_TIMER; |
| 1983 |
} |
| 1984 |
vdevice = sc->device->hostdata; |
| 1985 |
if (vdevice && vdevice->vtarget && (vdevice->vtarget->inDMD |
| 1986 |
|| vdevice->vtarget->deleted)) { |
| 1987 |
dtmprintk(ioc, printk(MYIOC_s_WARN_FMT ": %s: target removed " |
| 1988 |
"or in device removal delay (sc=%p)\n", |
| 1989 |
ioc->name, __func__, sc)); |
| 1990 |
rc = SCSI_EH_RESET_TIMER; |
| 1991 |
goto done; |
| 1992 |
} |
| 1993 |
|
| 1994 |
done: |
| 1995 |
return rc; |
| 1996 |
} |
| 1997 |
|
| 1998 |
|
| 1999 |
static const struct scsi_host_template mptsas_driver_template = { |
| 2000 |
.module = THIS_MODULE, |
| 2001 |
.proc_name = "mptsas", |
| 2002 |
.show_info = mptscsih_show_info, |
| 2003 |
.name = "MPT SAS Host", |
| 2004 |
.info = mptscsih_info, |
| 2005 |
.queuecommand = mptsas_qcmd, |
| 2006 |
.target_alloc = mptsas_target_alloc, |
| 2007 |
.sdev_init = mptsas_sdev_init, |
| 2008 |
.sdev_configure = mptsas_sdev_configure, |
| 2009 |
.target_destroy = mptsas_target_destroy, |
| 2010 |
.sdev_destroy = mptscsih_sdev_destroy, |
| 2011 |
.change_queue_depth = mptscsih_change_queue_depth, |
| 2012 |
.eh_timed_out = mptsas_eh_timed_out, |
| 2013 |
.eh_abort_handler = mptscsih_abort, |
| 2014 |
.eh_device_reset_handler = mptscsih_dev_reset, |
| 2015 |
.eh_host_reset_handler = mptscsih_host_reset, |
| 2016 |
.bios_param = mptscsih_bios_param, |
| 2017 |
.can_queue = MPT_SAS_CAN_QUEUE, |
| 2018 |
.this_id = -1, |
| 2019 |
.sg_tablesize = MPT_SCSI_SG_DEPTH, |
| 2020 |
.max_sectors = 8192, |
| 2021 |
.cmd_per_lun = 7, |
| 2022 |
.dma_alignment = 511, |
| 2023 |
.shost_groups = mptscsih_host_attr_groups, |
| 2024 |
.no_write_same = 1, |
| 2025 |
}; |
| 2026 |
|
| 2027 |
static int mptsas_get_linkerrors(struct sas_phy *phy) |
| 2028 |
{ |
| 2029 |
MPT_ADAPTER *ioc = phy_to_ioc(phy); |
| 2030 |
ConfigExtendedPageHeader_t hdr; |
| 2031 |
CONFIGPARMS cfg; |
| 2032 |
SasPhyPage1_t *buffer; |
| 2033 |
dma_addr_t dma_handle; |
| 2034 |
int error; |
| 2035 |
|
| 2036 |
/* FIXME: only have link errors on local phys */ |
| 2037 |
if (!scsi_is_sas_phy_local(phy)) |
| 2038 |
return -EINVAL; |
| 2039 |
|
| 2040 |
hdr.PageVersion = MPI_SASPHY1_PAGEVERSION; |
| 2041 |
hdr.ExtPageLength = 0; |
| 2042 |
hdr.PageNumber = 1 /* page number 1*/; |
| 2043 |
hdr.Reserved1 = 0; |
| 2044 |
hdr.Reserved2 = 0; |
| 2045 |
hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED; |
| 2046 |
hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_PHY; |
| 2047 |
|
| 2048 |
cfg.cfghdr.ehdr = &hdr; |
| 2049 |
cfg.physAddr = -1; |
| 2050 |
cfg.pageAddr = phy->identify.phy_identifier; |
| 2051 |
cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; |
| 2052 |
cfg.dir = 0; /* read */ |
| 2053 |
cfg.timeout = SAS_CONFIG_PAGE_TIMEOUT; |
| 2054 |
|
| 2055 |
error = mpt_config(ioc, &cfg); |
| 2056 |
if (error) |
| 2057 |
return error; |
| 2058 |
if (!hdr.ExtPageLength) |
| 2059 |
return -ENXIO; |
| 2060 |
|
| 2061 |
buffer = dma_alloc_coherent(&ioc->pcidev->dev, hdr.ExtPageLength * 4, |
| 2062 |
&dma_handle, GFP_KERNEL); |
| 2063 |
if (!buffer) |
| 2064 |
return -ENOMEM; |
| 2065 |
|
| 2066 |
cfg.physAddr = dma_handle; |
| 2067 |
cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; |
| 2068 |
|
| 2069 |
error = mpt_config(ioc, &cfg); |
| 2070 |
if (error) |
| 2071 |
goto out_free_consistent; |
| 2072 |
|
| 2073 |
mptsas_print_phy_pg1(ioc, buffer); |
| 2074 |
|
| 2075 |
phy->invalid_dword_count = le32_to_cpu(buffer->InvalidDwordCount); |
| 2076 |
phy->running_disparity_error_count = |
| 2077 |
le32_to_cpu(buffer->RunningDisparityErrorCount); |
| 2078 |
phy->loss_of_dword_sync_count = |
| 2079 |
le32_to_cpu(buffer->LossDwordSynchCount); |
| 2080 |
phy->phy_reset_problem_count = |
| 2081 |
le32_to_cpu(buffer->PhyResetProblemCount); |
| 2082 |
|
| 2083 |
out_free_consistent: |
| 2084 |
dma_free_coherent(&ioc->pcidev->dev, hdr.ExtPageLength * 4, buffer, |
| 2085 |
dma_handle); |
| 2086 |
return error; |
| 2087 |
} |
| 2088 |
|
| 2089 |
static int mptsas_mgmt_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, |
| 2090 |
MPT_FRAME_HDR *reply) |
| 2091 |
{ |
| 2092 |
ioc->sas_mgmt.status |= MPT_MGMT_STATUS_COMMAND_GOOD; |
| 2093 |
if (reply != NULL) { |
| 2094 |
ioc->sas_mgmt.status |= MPT_MGMT_STATUS_RF_VALID; |
| 2095 |
memcpy(ioc->sas_mgmt.reply, reply, |
| 2096 |
min(ioc->reply_sz, 4 * reply->u.reply.MsgLength)); |
| 2097 |
} |
| 2098 |
|
| 2099 |
if (ioc->sas_mgmt.status & MPT_MGMT_STATUS_PENDING) { |
| 2100 |
ioc->sas_mgmt.status &= ~MPT_MGMT_STATUS_PENDING; |
| 2101 |
complete(&ioc->sas_mgmt.done); |
| 2102 |
return 1; |
| 2103 |
} |
| 2104 |
return 0; |
| 2105 |
} |
| 2106 |
|
| 2107 |
static int mptsas_phy_reset(struct sas_phy *phy, int hard_reset) |
| 2108 |
{ |
| 2109 |
MPT_ADAPTER *ioc = phy_to_ioc(phy); |
| 2110 |
SasIoUnitControlRequest_t *req; |
| 2111 |
SasIoUnitControlReply_t *reply; |
| 2112 |
MPT_FRAME_HDR *mf; |
| 2113 |
MPIHeader_t *hdr; |
| 2114 |
unsigned long timeleft; |
| 2115 |
int error = -ERESTARTSYS; |
| 2116 |
|
| 2117 |
/* FIXME: fusion doesn't allow non-local phy reset */ |
| 2118 |
if (!scsi_is_sas_phy_local(phy)) |
| 2119 |
return -EINVAL; |
| 2120 |
|
| 2121 |
/* not implemented for expanders */ |
| 2122 |
if (phy->identify.target_port_protocols & SAS_PROTOCOL_SMP) |
| 2123 |
return -ENXIO; |
| 2124 |
|
| 2125 |
if (mutex_lock_interruptible(&ioc->sas_mgmt.mutex)) |
| 2126 |
goto out; |
| 2127 |
|
| 2128 |
mf = mpt_get_msg_frame(mptsasMgmtCtx, ioc); |
| 2129 |
if (!mf) { |
| 2130 |
error = -ENOMEM; |
| 2131 |
goto out_unlock; |
| 2132 |
} |
| 2133 |
|
| 2134 |
hdr = (MPIHeader_t *) mf; |
| 2135 |
req = (SasIoUnitControlRequest_t *)mf; |
| 2136 |
memset(req, 0, sizeof(SasIoUnitControlRequest_t)); |
| 2137 |
req->Function = MPI_FUNCTION_SAS_IO_UNIT_CONTROL; |
| 2138 |
req->MsgContext = hdr->MsgContext; |
| 2139 |
req->Operation = hard_reset ? |
| 2140 |
MPI_SAS_OP_PHY_HARD_RESET : MPI_SAS_OP_PHY_LINK_RESET; |
| 2141 |
req->PhyNum = phy->identify.phy_identifier; |
| 2142 |
|
| 2143 |
INITIALIZE_MGMT_STATUS(ioc->sas_mgmt.status) |
| 2144 |
mpt_put_msg_frame(mptsasMgmtCtx, ioc, mf); |
| 2145 |
|
| 2146 |
timeleft = wait_for_completion_timeout(&ioc->sas_mgmt.done, |
| 2147 |
10 * HZ); |
| 2148 |
if (!(ioc->sas_mgmt.status & MPT_MGMT_STATUS_COMMAND_GOOD)) { |
| 2149 |
error = -ETIME; |
| 2150 |
mpt_free_msg_frame(ioc, mf); |
| 2151 |
if (ioc->sas_mgmt.status & MPT_MGMT_STATUS_DID_IOCRESET) |
| 2152 |
goto out_unlock; |
| 2153 |
if (!timeleft) |
| 2154 |
mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP); |
| 2155 |
goto out_unlock; |
| 2156 |
} |
| 2157 |
|
| 2158 |
/* a reply frame is expected */ |
| 2159 |
if ((ioc->sas_mgmt.status & |
| 2160 |
MPT_MGMT_STATUS_RF_VALID) == 0) { |
| 2161 |
error = -ENXIO; |
| 2162 |
goto out_unlock; |
| 2163 |
} |
| 2164 |
|
| 2165 |
/* process the completed Reply Message Frame */ |
| 2166 |
reply = (SasIoUnitControlReply_t *)ioc->sas_mgmt.reply; |
| 2167 |
if (reply->IOCStatus != MPI_IOCSTATUS_SUCCESS) { |
| 2168 |
printk(MYIOC_s_INFO_FMT "%s: IOCStatus=0x%X IOCLogInfo=0x%X\n", |
| 2169 |
ioc->name, __func__, reply->IOCStatus, reply->IOCLogInfo); |
| 2170 |
error = -ENXIO; |
| 2171 |
goto out_unlock; |
| 2172 |
} |
| 2173 |
|
| 2174 |
error = 0; |
| 2175 |
|
| 2176 |
out_unlock: |
| 2177 |
CLEAR_MGMT_STATUS(ioc->sas_mgmt.status) |
| 2178 |
mutex_unlock(&ioc->sas_mgmt.mutex); |
| 2179 |
out: |
| 2180 |
return error; |
| 2181 |
} |
| 2182 |
|
| 2183 |
static int |
| 2184 |
mptsas_get_enclosure_identifier(struct sas_rphy *rphy, u64 *identifier) |
| 2185 |
{ |
| 2186 |
MPT_ADAPTER *ioc = rphy_to_ioc(rphy); |
| 2187 |
int i, error; |
| 2188 |
struct mptsas_portinfo *p; |
| 2189 |
struct mptsas_enclosure enclosure_info; |
| 2190 |
u64 enclosure_handle; |
| 2191 |
|
| 2192 |
mutex_lock(&ioc->sas_topology_mutex); |
| 2193 |
list_for_each_entry(p, &ioc->sas_topology, list) { |
| 2194 |
for (i = 0; i < p->num_phys; i++) { |
| 2195 |
if (p->phy_info[i].attached.sas_address == |
| 2196 |
rphy->identify.sas_address) { |
| 2197 |
enclosure_handle = p->phy_info[i]. |
| 2198 |
attached.handle_enclosure; |
| 2199 |
goto found_info; |
| 2200 |
} |
| 2201 |
} |
| 2202 |
} |
| 2203 |
mutex_unlock(&ioc->sas_topology_mutex); |
| 2204 |
return -ENXIO; |
| 2205 |
|
| 2206 |
found_info: |
| 2207 |
mutex_unlock(&ioc->sas_topology_mutex); |
| 2208 |
memset(&enclosure_info, 0, sizeof(struct mptsas_enclosure)); |
| 2209 |
error = mptsas_sas_enclosure_pg0(ioc, &enclosure_info, |
| 2210 |
(MPI_SAS_ENCLOS_PGAD_FORM_HANDLE << |
| 2211 |
MPI_SAS_ENCLOS_PGAD_FORM_SHIFT), enclosure_handle); |
| 2212 |
if (!error) |
| 2213 |
*identifier = enclosure_info.enclosure_logical_id; |
| 2214 |
return error; |
| 2215 |
} |
| 2216 |
|
| 2217 |
static int |
| 2218 |
mptsas_get_bay_identifier(struct sas_rphy *rphy) |
| 2219 |
{ |
| 2220 |
MPT_ADAPTER *ioc = rphy_to_ioc(rphy); |
| 2221 |
struct mptsas_portinfo *p; |
| 2222 |
int i, rc; |
| 2223 |
|
| 2224 |
mutex_lock(&ioc->sas_topology_mutex); |
| 2225 |
list_for_each_entry(p, &ioc->sas_topology, list) { |
| 2226 |
for (i = 0; i < p->num_phys; i++) { |
| 2227 |
if (p->phy_info[i].attached.sas_address == |
| 2228 |
rphy->identify.sas_address) { |
| 2229 |
rc = p->phy_info[i].attached.slot; |
| 2230 |
goto out; |
| 2231 |
} |
| 2232 |
} |
| 2233 |
} |
| 2234 |
rc = -ENXIO; |
| 2235 |
out: |
| 2236 |
mutex_unlock(&ioc->sas_topology_mutex); |
| 2237 |
return rc; |
| 2238 |
} |
| 2239 |
|
| 2240 |
static void mptsas_smp_handler(struct bsg_job *job, struct Scsi_Host *shost, |
| 2241 |
struct sas_rphy *rphy) |
| 2242 |
{ |
| 2243 |
MPT_ADAPTER *ioc = ((MPT_SCSI_HOST *) shost->hostdata)->ioc; |
| 2244 |
MPT_FRAME_HDR *mf; |
| 2245 |
SmpPassthroughRequest_t *smpreq; |
| 2246 |
int flagsLength; |
| 2247 |
unsigned long timeleft; |
| 2248 |
char *psge; |
| 2249 |
u64 sas_address = 0; |
| 2250 |
unsigned int reslen = 0; |
| 2251 |
int ret = -EINVAL; |
| 2252 |
|
| 2253 |
/* do we need to support multiple segments? */ |
| 2254 |
if (job->request_payload.sg_cnt > 1 || |
| 2255 |
job->reply_payload.sg_cnt > 1) { |
| 2256 |
printk(MYIOC_s_ERR_FMT "%s: multiple segments req %u, rsp %u\n", |
| 2257 |
ioc->name, __func__, job->request_payload.payload_len, |
| 2258 |
job->reply_payload.payload_len); |
| 2259 |
goto out; |
| 2260 |
} |
| 2261 |
|
| 2262 |
ret = mutex_lock_interruptible(&ioc->sas_mgmt.mutex); |
| 2263 |
if (ret) |
| 2264 |
goto out; |
| 2265 |
|
| 2266 |
mf = mpt_get_msg_frame(mptsasMgmtCtx, ioc); |
| 2267 |
if (!mf) { |
| 2268 |
ret = -ENOMEM; |
| 2269 |
goto out_unlock; |
| 2270 |
} |
| 2271 |
|
| 2272 |
smpreq = (SmpPassthroughRequest_t *)mf; |
| 2273 |
memset(smpreq, 0, sizeof(*smpreq)); |
| 2274 |
|
| 2275 |
smpreq->RequestDataLength = |
| 2276 |
cpu_to_le16(job->request_payload.payload_len - 4); |
| 2277 |
smpreq->Function = MPI_FUNCTION_SMP_PASSTHROUGH; |
| 2278 |
|
| 2279 |
if (rphy) |
| 2280 |
sas_address = rphy->identify.sas_address; |
| 2281 |
else { |
| 2282 |
struct mptsas_portinfo *port_info; |
| 2283 |
|
| 2284 |
mutex_lock(&ioc->sas_topology_mutex); |
| 2285 |
port_info = ioc->hba_port_info; |
| 2286 |
if (port_info && port_info->phy_info) |
| 2287 |
sas_address = |
| 2288 |
port_info->phy_info[0].phy->identify.sas_address; |
| 2289 |
mutex_unlock(&ioc->sas_topology_mutex); |
| 2290 |
} |
| 2291 |
|
| 2292 |
*((u64 *)&smpreq->SASAddress) = cpu_to_le64(sas_address); |
| 2293 |
|
| 2294 |
psge = (char *) |
| 2295 |
(((int *) mf) + (offsetof(SmpPassthroughRequest_t, SGL) / 4)); |
| 2296 |
|
| 2297 |
/* request */ |
| 2298 |
flagsLength = (MPI_SGE_FLAGS_SIMPLE_ELEMENT | |
| 2299 |
MPI_SGE_FLAGS_END_OF_BUFFER | |
| 2300 |
MPI_SGE_FLAGS_DIRECTION) |
| 2301 |
<< MPI_SGE_FLAGS_SHIFT; |
| 2302 |
|
| 2303 |
if (!dma_map_sg(&ioc->pcidev->dev, job->request_payload.sg_list, |
| 2304 |
1, DMA_BIDIRECTIONAL)) |
| 2305 |
goto put_mf; |
| 2306 |
|
| 2307 |
flagsLength |= (sg_dma_len(job->request_payload.sg_list) - 4); |
| 2308 |
ioc->add_sge(psge, flagsLength, |
| 2309 |
sg_dma_address(job->request_payload.sg_list)); |
| 2310 |
psge += ioc->SGE_size; |
| 2311 |
|
| 2312 |
/* response */ |
| 2313 |
flagsLength = MPI_SGE_FLAGS_SIMPLE_ELEMENT | |
| 2314 |
MPI_SGE_FLAGS_SYSTEM_ADDRESS | |
| 2315 |
MPI_SGE_FLAGS_IOC_TO_HOST | |
| 2316 |
MPI_SGE_FLAGS_END_OF_BUFFER; |
| 2317 |
|
| 2318 |
flagsLength = flagsLength << MPI_SGE_FLAGS_SHIFT; |
| 2319 |
|
| 2320 |
if (!dma_map_sg(&ioc->pcidev->dev, job->reply_payload.sg_list, |
| 2321 |
1, DMA_BIDIRECTIONAL)) |
| 2322 |
goto unmap_out; |
| 2323 |
flagsLength |= sg_dma_len(job->reply_payload.sg_list) + 4; |
| 2324 |
ioc->add_sge(psge, flagsLength, |
| 2325 |
sg_dma_address(job->reply_payload.sg_list)); |
| 2326 |
|
| 2327 |
INITIALIZE_MGMT_STATUS(ioc->sas_mgmt.status) |
| 2328 |
mpt_put_msg_frame(mptsasMgmtCtx, ioc, mf); |
| 2329 |
|
| 2330 |
timeleft = wait_for_completion_timeout(&ioc->sas_mgmt.done, 10 * HZ); |
| 2331 |
if (!(ioc->sas_mgmt.status & MPT_MGMT_STATUS_COMMAND_GOOD)) { |
| 2332 |
ret = -ETIME; |
| 2333 |
mpt_free_msg_frame(ioc, mf); |
| 2334 |
mf = NULL; |
| 2335 |
if (ioc->sas_mgmt.status & MPT_MGMT_STATUS_DID_IOCRESET) |
| 2336 |
goto unmap_in; |
| 2337 |
if (!timeleft) |
| 2338 |
mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP); |
| 2339 |
goto unmap_in; |
| 2340 |
} |
| 2341 |
mf = NULL; |
| 2342 |
|
| 2343 |
if (ioc->sas_mgmt.status & MPT_MGMT_STATUS_RF_VALID) { |
| 2344 |
SmpPassthroughReply_t *smprep; |
| 2345 |
|
| 2346 |
smprep = (SmpPassthroughReply_t *)ioc->sas_mgmt.reply; |
| 2347 |
memcpy(job->reply, smprep, sizeof(*smprep)); |
| 2348 |
job->reply_len = sizeof(*smprep); |
| 2349 |
reslen = smprep->ResponseDataLength; |
| 2350 |
} else { |
| 2351 |
printk(MYIOC_s_ERR_FMT |
| 2352 |
"%s: smp passthru reply failed to be returned\n", |
| 2353 |
ioc->name, __func__); |
| 2354 |
ret = -ENXIO; |
| 2355 |
} |
| 2356 |
|
| 2357 |
unmap_in: |
| 2358 |
dma_unmap_sg(&ioc->pcidev->dev, job->reply_payload.sg_list, 1, |
| 2359 |
DMA_BIDIRECTIONAL); |
| 2360 |
unmap_out: |
| 2361 |
dma_unmap_sg(&ioc->pcidev->dev, job->request_payload.sg_list, 1, |
| 2362 |
DMA_BIDIRECTIONAL); |
| 2363 |
put_mf: |
| 2364 |
if (mf) |
| 2365 |
mpt_free_msg_frame(ioc, mf); |
| 2366 |
out_unlock: |
| 2367 |
CLEAR_MGMT_STATUS(ioc->sas_mgmt.status) |
| 2368 |
mutex_unlock(&ioc->sas_mgmt.mutex); |
| 2369 |
out: |
| 2370 |
bsg_job_done(job, ret, reslen); |
| 2371 |
} |
| 2372 |
|
| 2373 |
static struct sas_function_template mptsas_transport_functions = { |
| 2374 |
.get_linkerrors = mptsas_get_linkerrors, |
| 2375 |
.get_enclosure_identifier = mptsas_get_enclosure_identifier, |
| 2376 |
.get_bay_identifier = mptsas_get_bay_identifier, |
| 2377 |
.phy_reset = mptsas_phy_reset, |
| 2378 |
.smp_handler = mptsas_smp_handler, |
| 2379 |
}; |
| 2380 |
|
| 2381 |
static struct scsi_transport_template *mptsas_transport_template; |
| 2382 |
|
| 2383 |
static int |
| 2384 |
mptsas_sas_io_unit_pg0(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info) |
| 2385 |
{ |
| 2386 |
ConfigExtendedPageHeader_t hdr; |
| 2387 |
CONFIGPARMS cfg; |
| 2388 |
SasIOUnitPage0_t *buffer; |
| 2389 |
dma_addr_t dma_handle; |
| 2390 |
int error, i; |
| 2391 |
|
| 2392 |
hdr.PageVersion = MPI_SASIOUNITPAGE0_PAGEVERSION; |
| 2393 |
hdr.ExtPageLength = 0; |
| 2394 |
hdr.PageNumber = 0; |
| 2395 |
hdr.Reserved1 = 0; |
| 2396 |
hdr.Reserved2 = 0; |
| 2397 |
hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED; |
| 2398 |
hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_IO_UNIT; |
| 2399 |
|
| 2400 |
cfg.cfghdr.ehdr = &hdr; |
| 2401 |
cfg.physAddr = -1; |
| 2402 |
cfg.pageAddr = 0; |
| 2403 |
cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; |
| 2404 |
cfg.dir = 0; /* read */ |
| 2405 |
cfg.timeout = SAS_CONFIG_PAGE_TIMEOUT; |
| 2406 |
|
| 2407 |
error = mpt_config(ioc, &cfg); |
| 2408 |
if (error) |
| 2409 |
goto out; |
| 2410 |
if (!hdr.ExtPageLength) { |
| 2411 |
error = -ENXIO; |
| 2412 |
goto out; |
| 2413 |
} |
| 2414 |
|
| 2415 |
buffer = dma_alloc_coherent(&ioc->pcidev->dev, hdr.ExtPageLength * 4, |
| 2416 |
&dma_handle, GFP_KERNEL); |
| 2417 |
if (!buffer) { |
| 2418 |
error = -ENOMEM; |
| 2419 |
goto out; |
| 2420 |
} |
| 2421 |
|
| 2422 |
cfg.physAddr = dma_handle; |
| 2423 |
cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; |
| 2424 |
|
| 2425 |
error = mpt_config(ioc, &cfg); |
| 2426 |
if (error) |
| 2427 |
goto out_free_consistent; |
| 2428 |
|
| 2429 |
port_info->num_phys = buffer->NumPhys; |
| 2430 |
port_info->phy_info = kzalloc_objs(struct mptsas_phyinfo, |
| 2431 |
port_info->num_phys); |
| 2432 |
if (!port_info->phy_info) { |
| 2433 |
error = -ENOMEM; |
| 2434 |
goto out_free_consistent; |
| 2435 |
} |
| 2436 |
|
| 2437 |
ioc->nvdata_version_persistent = |
| 2438 |
le16_to_cpu(buffer->NvdataVersionPersistent); |
| 2439 |
ioc->nvdata_version_default = |
| 2440 |
le16_to_cpu(buffer->NvdataVersionDefault); |
| 2441 |
|
| 2442 |
for (i = 0; i < port_info->num_phys; i++) { |
| 2443 |
mptsas_print_phy_data(ioc, &buffer->PhyData[i]); |
| 2444 |
port_info->phy_info[i].phy_id = i; |
| 2445 |
port_info->phy_info[i].port_id = |
| 2446 |
buffer->PhyData[i].Port; |
| 2447 |
port_info->phy_info[i].negotiated_link_rate = |
| 2448 |
buffer->PhyData[i].NegotiatedLinkRate; |
| 2449 |
port_info->phy_info[i].portinfo = port_info; |
| 2450 |
port_info->phy_info[i].handle = |
| 2451 |
le16_to_cpu(buffer->PhyData[i].ControllerDevHandle); |
| 2452 |
} |
| 2453 |
|
| 2454 |
out_free_consistent: |
| 2455 |
dma_free_coherent(&ioc->pcidev->dev, hdr.ExtPageLength * 4, buffer, |
| 2456 |
dma_handle); |
| 2457 |
out: |
| 2458 |
return error; |
| 2459 |
} |
| 2460 |
|
| 2461 |
static int |
| 2462 |
mptsas_sas_io_unit_pg1(MPT_ADAPTER *ioc) |
| 2463 |
{ |
| 2464 |
ConfigExtendedPageHeader_t hdr; |
| 2465 |
CONFIGPARMS cfg; |
| 2466 |
SasIOUnitPage1_t *buffer; |
| 2467 |
dma_addr_t dma_handle; |
| 2468 |
int error; |
| 2469 |
u8 device_missing_delay; |
| 2470 |
|
| 2471 |
memset(&hdr, 0, sizeof(ConfigExtendedPageHeader_t)); |
| 2472 |
memset(&cfg, 0, sizeof(CONFIGPARMS)); |
| 2473 |
|
| 2474 |
cfg.cfghdr.ehdr = &hdr; |
| 2475 |
cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; |
| 2476 |
cfg.timeout = SAS_CONFIG_PAGE_TIMEOUT; |
| 2477 |
cfg.cfghdr.ehdr->PageType = MPI_CONFIG_PAGETYPE_EXTENDED; |
| 2478 |
cfg.cfghdr.ehdr->ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_IO_UNIT; |
| 2479 |
cfg.cfghdr.ehdr->PageVersion = MPI_SASIOUNITPAGE1_PAGEVERSION; |
| 2480 |
cfg.cfghdr.ehdr->PageNumber = 1; |
| 2481 |
|
| 2482 |
error = mpt_config(ioc, &cfg); |
| 2483 |
if (error) |
| 2484 |
goto out; |
| 2485 |
if (!hdr.ExtPageLength) { |
| 2486 |
error = -ENXIO; |
| 2487 |
goto out; |
| 2488 |
} |
| 2489 |
|
| 2490 |
buffer = dma_alloc_coherent(&ioc->pcidev->dev, hdr.ExtPageLength * 4, |
| 2491 |
&dma_handle, GFP_KERNEL); |
| 2492 |
if (!buffer) { |
| 2493 |
error = -ENOMEM; |
| 2494 |
goto out; |
| 2495 |
} |
| 2496 |
|
| 2497 |
cfg.physAddr = dma_handle; |
| 2498 |
cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; |
| 2499 |
|
| 2500 |
error = mpt_config(ioc, &cfg); |
| 2501 |
if (error) |
| 2502 |
goto out_free_consistent; |
| 2503 |
|
| 2504 |
ioc->io_missing_delay = |
| 2505 |
le16_to_cpu(buffer->IODeviceMissingDelay); |
| 2506 |
device_missing_delay = buffer->ReportDeviceMissingDelay; |
| 2507 |
ioc->device_missing_delay = (device_missing_delay & MPI_SAS_IOUNIT1_REPORT_MISSING_UNIT_16) ? |
| 2508 |
(device_missing_delay & MPI_SAS_IOUNIT1_REPORT_MISSING_TIMEOUT_MASK) * 16 : |
| 2509 |
device_missing_delay & MPI_SAS_IOUNIT1_REPORT_MISSING_TIMEOUT_MASK; |
| 2510 |
|
| 2511 |
out_free_consistent: |
| 2512 |
dma_free_coherent(&ioc->pcidev->dev, hdr.ExtPageLength * 4, buffer, |
| 2513 |
dma_handle); |
| 2514 |
out: |
| 2515 |
return error; |
| 2516 |
} |
| 2517 |
|
| 2518 |
static int |
| 2519 |
mptsas_sas_phy_pg0(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info, |
| 2520 |
u32 form, u32 form_specific) |
| 2521 |
{ |
| 2522 |
ConfigExtendedPageHeader_t hdr; |
| 2523 |
CONFIGPARMS cfg; |
| 2524 |
SasPhyPage0_t *buffer; |
| 2525 |
dma_addr_t dma_handle; |
| 2526 |
int error; |
| 2527 |
|
| 2528 |
hdr.PageVersion = MPI_SASPHY0_PAGEVERSION; |
| 2529 |
hdr.ExtPageLength = 0; |
| 2530 |
hdr.PageNumber = 0; |
| 2531 |
hdr.Reserved1 = 0; |
| 2532 |
hdr.Reserved2 = 0; |
| 2533 |
hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED; |
| 2534 |
hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_PHY; |
| 2535 |
|
| 2536 |
cfg.cfghdr.ehdr = &hdr; |
| 2537 |
cfg.dir = 0; /* read */ |
| 2538 |
cfg.timeout = SAS_CONFIG_PAGE_TIMEOUT; |
| 2539 |
|
| 2540 |
/* Get Phy Pg 0 for each Phy. */ |
| 2541 |
cfg.physAddr = -1; |
| 2542 |
cfg.pageAddr = form + form_specific; |
| 2543 |
cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; |
| 2544 |
|
| 2545 |
error = mpt_config(ioc, &cfg); |
| 2546 |
if (error) |
| 2547 |
goto out; |
| 2548 |
|
| 2549 |
if (!hdr.ExtPageLength) { |
| 2550 |
error = -ENXIO; |
| 2551 |
goto out; |
| 2552 |
} |
| 2553 |
|
| 2554 |
buffer = dma_alloc_coherent(&ioc->pcidev->dev, hdr.ExtPageLength * 4, |
| 2555 |
&dma_handle, GFP_KERNEL); |
| 2556 |
if (!buffer) { |
| 2557 |
error = -ENOMEM; |
| 2558 |
goto out; |
| 2559 |
} |
| 2560 |
|
| 2561 |
cfg.physAddr = dma_handle; |
| 2562 |
cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; |
| 2563 |
|
| 2564 |
error = mpt_config(ioc, &cfg); |
| 2565 |
if (error) |
| 2566 |
goto out_free_consistent; |
| 2567 |
|
| 2568 |
mptsas_print_phy_pg0(ioc, buffer); |
| 2569 |
|
| 2570 |
phy_info->hw_link_rate = buffer->HwLinkRate; |
| 2571 |
phy_info->programmed_link_rate = buffer->ProgrammedLinkRate; |
| 2572 |
phy_info->identify.handle = le16_to_cpu(buffer->OwnerDevHandle); |
| 2573 |
phy_info->attached.handle = le16_to_cpu(buffer->AttachedDevHandle); |
| 2574 |
|
| 2575 |
out_free_consistent: |
| 2576 |
dma_free_coherent(&ioc->pcidev->dev, hdr.ExtPageLength * 4, buffer, |
| 2577 |
dma_handle); |
| 2578 |
out: |
| 2579 |
return error; |
| 2580 |
} |
| 2581 |
|
| 2582 |
static int |
| 2583 |
mptsas_sas_device_pg0(MPT_ADAPTER *ioc, struct mptsas_devinfo *device_info, |
| 2584 |
u32 form, u32 form_specific) |
| 2585 |
{ |
| 2586 |
ConfigExtendedPageHeader_t hdr; |
| 2587 |
CONFIGPARMS cfg; |
| 2588 |
SasDevicePage0_t *buffer; |
| 2589 |
dma_addr_t dma_handle; |
| 2590 |
__le64 sas_address; |
| 2591 |
int error=0; |
| 2592 |
|
| 2593 |
hdr.PageVersion = MPI_SASDEVICE0_PAGEVERSION; |
| 2594 |
hdr.ExtPageLength = 0; |
| 2595 |
hdr.PageNumber = 0; |
| 2596 |
hdr.Reserved1 = 0; |
| 2597 |
hdr.Reserved2 = 0; |
| 2598 |
hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED; |
| 2599 |
hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_DEVICE; |
| 2600 |
|
| 2601 |
cfg.cfghdr.ehdr = &hdr; |
| 2602 |
cfg.pageAddr = form + form_specific; |
| 2603 |
cfg.physAddr = -1; |
| 2604 |
cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; |
| 2605 |
cfg.dir = 0; /* read */ |
| 2606 |
cfg.timeout = SAS_CONFIG_PAGE_TIMEOUT; |
| 2607 |
|
| 2608 |
memset(device_info, 0, sizeof(struct mptsas_devinfo)); |
| 2609 |
error = mpt_config(ioc, &cfg); |
| 2610 |
if (error) |
| 2611 |
goto out; |
| 2612 |
if (!hdr.ExtPageLength) { |
| 2613 |
error = -ENXIO; |
| 2614 |
goto out; |
| 2615 |
} |
| 2616 |
|
| 2617 |
buffer = dma_alloc_coherent(&ioc->pcidev->dev, hdr.ExtPageLength * 4, |
| 2618 |
&dma_handle, GFP_KERNEL); |
| 2619 |
if (!buffer) { |
| 2620 |
error = -ENOMEM; |
| 2621 |
goto out; |
| 2622 |
} |
| 2623 |
|
| 2624 |
cfg.physAddr = dma_handle; |
| 2625 |
cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; |
| 2626 |
|
| 2627 |
error = mpt_config(ioc, &cfg); |
| 2628 |
|
| 2629 |
if (error == MPI_IOCSTATUS_CONFIG_INVALID_PAGE) { |
| 2630 |
error = -ENODEV; |
| 2631 |
goto out_free_consistent; |
| 2632 |
} |
| 2633 |
|
| 2634 |
if (error) |
| 2635 |
goto out_free_consistent; |
| 2636 |
|
| 2637 |
mptsas_print_device_pg0(ioc, buffer); |
| 2638 |
|
| 2639 |
memset(device_info, 0, sizeof(struct mptsas_devinfo)); |
| 2640 |
device_info->handle = le16_to_cpu(buffer->DevHandle); |
| 2641 |
device_info->handle_parent = le16_to_cpu(buffer->ParentDevHandle); |
| 2642 |
device_info->handle_enclosure = |
| 2643 |
le16_to_cpu(buffer->EnclosureHandle); |
| 2644 |
device_info->slot = le16_to_cpu(buffer->Slot); |
| 2645 |
device_info->phy_id = buffer->PhyNum; |
| 2646 |
device_info->port_id = buffer->PhysicalPort; |
| 2647 |
device_info->id = buffer->TargetID; |
| 2648 |
device_info->phys_disk_num = ~0; |
| 2649 |
device_info->channel = buffer->Bus; |
| 2650 |
memcpy(&sas_address, &buffer->SASAddress, sizeof(__le64)); |
| 2651 |
device_info->sas_address = le64_to_cpu(sas_address); |
| 2652 |
device_info->device_info = |
| 2653 |
le32_to_cpu(buffer->DeviceInfo); |
| 2654 |
device_info->flags = le16_to_cpu(buffer->Flags); |
| 2655 |
|
| 2656 |
out_free_consistent: |
| 2657 |
dma_free_coherent(&ioc->pcidev->dev, hdr.ExtPageLength * 4, buffer, |
| 2658 |
dma_handle); |
| 2659 |
out: |
| 2660 |
return error; |
| 2661 |
} |
| 2662 |
|
| 2663 |
static int |
| 2664 |
mptsas_sas_expander_pg0(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info, |
| 2665 |
u32 form, u32 form_specific) |
| 2666 |
{ |
| 2667 |
ConfigExtendedPageHeader_t hdr; |
| 2668 |
CONFIGPARMS cfg; |
| 2669 |
SasExpanderPage0_t *buffer; |
| 2670 |
dma_addr_t dma_handle; |
| 2671 |
int i, error; |
| 2672 |
__le64 sas_address; |
| 2673 |
|
| 2674 |
memset(port_info, 0, sizeof(struct mptsas_portinfo)); |
| 2675 |
hdr.PageVersion = MPI_SASEXPANDER0_PAGEVERSION; |
| 2676 |
hdr.ExtPageLength = 0; |
| 2677 |
hdr.PageNumber = 0; |
| 2678 |
hdr.Reserved1 = 0; |
| 2679 |
hdr.Reserved2 = 0; |
| 2680 |
hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED; |
| 2681 |
hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_EXPANDER; |
| 2682 |
|
| 2683 |
cfg.cfghdr.ehdr = &hdr; |
| 2684 |
cfg.physAddr = -1; |
| 2685 |
cfg.pageAddr = form + form_specific; |
| 2686 |
cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; |
| 2687 |
cfg.dir = 0; /* read */ |
| 2688 |
cfg.timeout = SAS_CONFIG_PAGE_TIMEOUT; |
| 2689 |
|
| 2690 |
memset(port_info, 0, sizeof(struct mptsas_portinfo)); |
| 2691 |
error = mpt_config(ioc, &cfg); |
| 2692 |
if (error) |
| 2693 |
goto out; |
| 2694 |
|
| 2695 |
if (!hdr.ExtPageLength) { |
| 2696 |
error = -ENXIO; |
| 2697 |
goto out; |
| 2698 |
} |
| 2699 |
|
| 2700 |
buffer = dma_alloc_coherent(&ioc->pcidev->dev, hdr.ExtPageLength * 4, |
| 2701 |
&dma_handle, GFP_KERNEL); |
| 2702 |
if (!buffer) { |
| 2703 |
error = -ENOMEM; |
| 2704 |
goto out; |
| 2705 |
} |
| 2706 |
|
| 2707 |
cfg.physAddr = dma_handle; |
| 2708 |
cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; |
| 2709 |
|
| 2710 |
error = mpt_config(ioc, &cfg); |
| 2711 |
if (error == MPI_IOCSTATUS_CONFIG_INVALID_PAGE) { |
| 2712 |
error = -ENODEV; |
| 2713 |
goto out_free_consistent; |
| 2714 |
} |
| 2715 |
|
| 2716 |
if (error) |
| 2717 |
goto out_free_consistent; |
| 2718 |
|
| 2719 |
/* save config data */ |
| 2720 |
port_info->num_phys = (buffer->NumPhys) ? buffer->NumPhys : 1; |
| 2721 |
port_info->phy_info = kzalloc_objs(struct mptsas_phyinfo, |
| 2722 |
port_info->num_phys); |
| 2723 |
if (!port_info->phy_info) { |
| 2724 |
error = -ENOMEM; |
| 2725 |
goto out_free_consistent; |
| 2726 |
} |
| 2727 |
|
| 2728 |
memcpy(&sas_address, &buffer->SASAddress, sizeof(__le64)); |
| 2729 |
for (i = 0; i < port_info->num_phys; i++) { |
| 2730 |
port_info->phy_info[i].portinfo = port_info; |
| 2731 |
port_info->phy_info[i].handle = |
| 2732 |
le16_to_cpu(buffer->DevHandle); |
| 2733 |
port_info->phy_info[i].identify.sas_address = |
| 2734 |
le64_to_cpu(sas_address); |
| 2735 |
port_info->phy_info[i].identify.handle_parent = |
| 2736 |
le16_to_cpu(buffer->ParentDevHandle); |
| 2737 |
} |
| 2738 |
|
| 2739 |
out_free_consistent: |
| 2740 |
dma_free_coherent(&ioc->pcidev->dev, hdr.ExtPageLength * 4, buffer, |
| 2741 |
dma_handle); |
| 2742 |
out: |
| 2743 |
return error; |
| 2744 |
} |
| 2745 |
|
| 2746 |
static int |
| 2747 |
mptsas_sas_expander_pg1(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info, |
| 2748 |
u32 form, u32 form_specific) |
| 2749 |
{ |
| 2750 |
ConfigExtendedPageHeader_t hdr; |
| 2751 |
CONFIGPARMS cfg; |
| 2752 |
SasExpanderPage1_t *buffer; |
| 2753 |
dma_addr_t dma_handle; |
| 2754 |
int error=0; |
| 2755 |
|
| 2756 |
hdr.PageVersion = MPI_SASEXPANDER1_PAGEVERSION; |
| 2757 |
hdr.ExtPageLength = 0; |
| 2758 |
hdr.PageNumber = 1; |
| 2759 |
hdr.Reserved1 = 0; |
| 2760 |
hdr.Reserved2 = 0; |
| 2761 |
hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED; |
| 2762 |
hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_EXPANDER; |
| 2763 |
|
| 2764 |
cfg.cfghdr.ehdr = &hdr; |
| 2765 |
cfg.physAddr = -1; |
| 2766 |
cfg.pageAddr = form + form_specific; |
| 2767 |
cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; |
| 2768 |
cfg.dir = 0; /* read */ |
| 2769 |
cfg.timeout = SAS_CONFIG_PAGE_TIMEOUT; |
| 2770 |
|
| 2771 |
error = mpt_config(ioc, &cfg); |
| 2772 |
if (error) |
| 2773 |
goto out; |
| 2774 |
|
| 2775 |
if (!hdr.ExtPageLength) { |
| 2776 |
error = -ENXIO; |
| 2777 |
goto out; |
| 2778 |
} |
| 2779 |
|
| 2780 |
buffer = dma_alloc_coherent(&ioc->pcidev->dev, hdr.ExtPageLength * 4, |
| 2781 |
&dma_handle, GFP_KERNEL); |
| 2782 |
if (!buffer) { |
| 2783 |
error = -ENOMEM; |
| 2784 |
goto out; |
| 2785 |
} |
| 2786 |
|
| 2787 |
cfg.physAddr = dma_handle; |
| 2788 |
cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; |
| 2789 |
|
| 2790 |
error = mpt_config(ioc, &cfg); |
| 2791 |
|
| 2792 |
if (error == MPI_IOCSTATUS_CONFIG_INVALID_PAGE) { |
| 2793 |
error = -ENODEV; |
| 2794 |
goto out_free_consistent; |
| 2795 |
} |
| 2796 |
|
| 2797 |
if (error) |
| 2798 |
goto out_free_consistent; |
| 2799 |
|
| 2800 |
|
| 2801 |
mptsas_print_expander_pg1(ioc, buffer); |
| 2802 |
|
| 2803 |
/* save config data */ |
| 2804 |
phy_info->phy_id = buffer->PhyIdentifier; |
| 2805 |
phy_info->port_id = buffer->PhysicalPort; |
| 2806 |
phy_info->negotiated_link_rate = buffer->NegotiatedLinkRate; |
| 2807 |
phy_info->programmed_link_rate = buffer->ProgrammedLinkRate; |
| 2808 |
phy_info->hw_link_rate = buffer->HwLinkRate; |
| 2809 |
phy_info->identify.handle = le16_to_cpu(buffer->OwnerDevHandle); |
| 2810 |
phy_info->attached.handle = le16_to_cpu(buffer->AttachedDevHandle); |
| 2811 |
|
| 2812 |
out_free_consistent: |
| 2813 |
dma_free_coherent(&ioc->pcidev->dev, hdr.ExtPageLength * 4, buffer, |
| 2814 |
dma_handle); |
| 2815 |
out: |
| 2816 |
return error; |
| 2817 |
} |
| 2818 |
|
| 2819 |
struct rep_manu_request{ |
| 2820 |
u8 smp_frame_type; |
| 2821 |
u8 function; |
| 2822 |
u8 reserved; |
| 2823 |
u8 request_length; |
| 2824 |
}; |
| 2825 |
|
| 2826 |
struct rep_manu_reply{ |
| 2827 |
u8 smp_frame_type; /* 0x41 */ |
| 2828 |
u8 function; /* 0x01 */ |
| 2829 |
u8 function_result; |
| 2830 |
u8 response_length; |
| 2831 |
u16 expander_change_count; |
| 2832 |
u8 reserved0[2]; |
| 2833 |
u8 sas_format:1; |
| 2834 |
u8 reserved1:7; |
| 2835 |
u8 reserved2[3]; |
| 2836 |
u8 vendor_id[SAS_EXPANDER_VENDOR_ID_LEN] __nonstring; |
| 2837 |
u8 product_id[SAS_EXPANDER_PRODUCT_ID_LEN] __nonstring; |
| 2838 |
u8 product_rev[SAS_EXPANDER_PRODUCT_REV_LEN] __nonstring; |
| 2839 |
u8 component_vendor_id[SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN] __nonstring; |
| 2840 |
u16 component_id; |
| 2841 |
u8 component_revision_id; |
| 2842 |
u8 reserved3; |
| 2843 |
u8 vendor_specific[8]; |
| 2844 |
}; |
| 2845 |
|
| 2846 |
/** |
| 2847 |
* mptsas_exp_repmanufacture_info - sets expander manufacturer info |
| 2848 |
* @ioc: per adapter object |
| 2849 |
* @sas_address: expander sas address |
| 2850 |
* @edev: the sas_expander_device object |
| 2851 |
* |
| 2852 |
* For an edge expander or a fanout expander: |
| 2853 |
* fills in the sas_expander_device object when SMP port is created. |
| 2854 |
* |
| 2855 |
* Return: 0 for success, non-zero for failure. |
| 2856 |
*/ |
| 2857 |
static int |
| 2858 |
mptsas_exp_repmanufacture_info(MPT_ADAPTER *ioc, |
| 2859 |
u64 sas_address, struct sas_expander_device *edev) |
| 2860 |
{ |
| 2861 |
MPT_FRAME_HDR *mf; |
| 2862 |
SmpPassthroughRequest_t *smpreq; |
| 2863 |
SmpPassthroughReply_t *smprep; |
| 2864 |
struct rep_manu_reply *manufacture_reply; |
| 2865 |
struct rep_manu_request *manufacture_request; |
| 2866 |
int ret; |
| 2867 |
int flagsLength; |
| 2868 |
unsigned long timeleft; |
| 2869 |
char *psge; |
| 2870 |
unsigned long flags; |
| 2871 |
void *data_out = NULL; |
| 2872 |
dma_addr_t data_out_dma = 0; |
| 2873 |
u32 sz; |
| 2874 |
|
| 2875 |
spin_lock_irqsave(&ioc->taskmgmt_lock, flags); |
| 2876 |
if (ioc->ioc_reset_in_progress) { |
| 2877 |
spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); |
| 2878 |
printk(MYIOC_s_INFO_FMT "%s: host reset in progress!\n", |
| 2879 |
__func__, ioc->name); |
| 2880 |
return -EFAULT; |
| 2881 |
} |
| 2882 |
spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); |
| 2883 |
|
| 2884 |
ret = mutex_lock_interruptible(&ioc->sas_mgmt.mutex); |
| 2885 |
if (ret) |
| 2886 |
goto out; |
| 2887 |
|
| 2888 |
mf = mpt_get_msg_frame(mptsasMgmtCtx, ioc); |
| 2889 |
if (!mf) { |
| 2890 |
ret = -ENOMEM; |
| 2891 |
goto out_unlock; |
| 2892 |
} |
| 2893 |
|
| 2894 |
smpreq = (SmpPassthroughRequest_t *)mf; |
| 2895 |
memset(smpreq, 0, sizeof(*smpreq)); |
| 2896 |
|
| 2897 |
sz = sizeof(struct rep_manu_request) + sizeof(struct rep_manu_reply); |
| 2898 |
|
| 2899 |
data_out = dma_alloc_coherent(&ioc->pcidev->dev, sz, &data_out_dma, |
| 2900 |
GFP_KERNEL); |
| 2901 |
if (!data_out) { |
| 2902 |
printk(KERN_ERR "Memory allocation failure at %s:%d/%s()!\n", |
| 2903 |
__FILE__, __LINE__, __func__); |
| 2904 |
ret = -ENOMEM; |
| 2905 |
goto put_mf; |
| 2906 |
} |
| 2907 |
|
| 2908 |
manufacture_request = data_out; |
| 2909 |
manufacture_request->smp_frame_type = 0x40; |
| 2910 |
manufacture_request->function = 1; |
| 2911 |
manufacture_request->reserved = 0; |
| 2912 |
manufacture_request->request_length = 0; |
| 2913 |
|
| 2914 |
smpreq->Function = MPI_FUNCTION_SMP_PASSTHROUGH; |
| 2915 |
smpreq->PhysicalPort = 0xFF; |
| 2916 |
*((u64 *)&smpreq->SASAddress) = cpu_to_le64(sas_address); |
| 2917 |
smpreq->RequestDataLength = sizeof(struct rep_manu_request); |
| 2918 |
|
| 2919 |
psge = (char *) |
| 2920 |
(((int *) mf) + (offsetof(SmpPassthroughRequest_t, SGL) / 4)); |
| 2921 |
|
| 2922 |
flagsLength = MPI_SGE_FLAGS_SIMPLE_ELEMENT | |
| 2923 |
MPI_SGE_FLAGS_SYSTEM_ADDRESS | |
| 2924 |
MPI_SGE_FLAGS_HOST_TO_IOC | |
| 2925 |
MPI_SGE_FLAGS_END_OF_BUFFER; |
| 2926 |
flagsLength = flagsLength << MPI_SGE_FLAGS_SHIFT; |
| 2927 |
flagsLength |= sizeof(struct rep_manu_request); |
| 2928 |
|
| 2929 |
ioc->add_sge(psge, flagsLength, data_out_dma); |
| 2930 |
psge += ioc->SGE_size; |
| 2931 |
|
| 2932 |
flagsLength = MPI_SGE_FLAGS_SIMPLE_ELEMENT | |
| 2933 |
MPI_SGE_FLAGS_SYSTEM_ADDRESS | |
| 2934 |
MPI_SGE_FLAGS_IOC_TO_HOST | |
| 2935 |
MPI_SGE_FLAGS_END_OF_BUFFER; |
| 2936 |
flagsLength = flagsLength << MPI_SGE_FLAGS_SHIFT; |
| 2937 |
flagsLength |= sizeof(struct rep_manu_reply); |
| 2938 |
ioc->add_sge(psge, flagsLength, data_out_dma + |
| 2939 |
sizeof(struct rep_manu_request)); |
| 2940 |
|
| 2941 |
INITIALIZE_MGMT_STATUS(ioc->sas_mgmt.status) |
| 2942 |
mpt_put_msg_frame(mptsasMgmtCtx, ioc, mf); |
| 2943 |
|
| 2944 |
timeleft = wait_for_completion_timeout(&ioc->sas_mgmt.done, 10 * HZ); |
| 2945 |
if (!(ioc->sas_mgmt.status & MPT_MGMT_STATUS_COMMAND_GOOD)) { |
| 2946 |
ret = -ETIME; |
| 2947 |
mpt_free_msg_frame(ioc, mf); |
| 2948 |
mf = NULL; |
| 2949 |
if (ioc->sas_mgmt.status & MPT_MGMT_STATUS_DID_IOCRESET) |
| 2950 |
goto out_free; |
| 2951 |
if (!timeleft) |
| 2952 |
mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP); |
| 2953 |
goto out_free; |
| 2954 |
} |
| 2955 |
|
| 2956 |
mf = NULL; |
| 2957 |
|
| 2958 |
if (ioc->sas_mgmt.status & MPT_MGMT_STATUS_RF_VALID) { |
| 2959 |
u8 *tmp; |
| 2960 |
|
| 2961 |
smprep = (SmpPassthroughReply_t *)ioc->sas_mgmt.reply; |
| 2962 |
if (le16_to_cpu(smprep->ResponseDataLength) != |
| 2963 |
sizeof(struct rep_manu_reply)) |
| 2964 |
goto out_free; |
| 2965 |
|
| 2966 |
manufacture_reply = data_out + sizeof(struct rep_manu_request); |
| 2967 |
memtostr(edev->vendor_id, manufacture_reply->vendor_id); |
| 2968 |
memtostr(edev->product_id, manufacture_reply->product_id); |
| 2969 |
memtostr(edev->product_rev, manufacture_reply->product_rev); |
| 2970 |
edev->level = manufacture_reply->sas_format; |
| 2971 |
if (manufacture_reply->sas_format) { |
| 2972 |
memtostr(edev->component_vendor_id, |
| 2973 |
manufacture_reply->component_vendor_id); |
| 2974 |
tmp = (u8 *)&manufacture_reply->component_id; |
| 2975 |
edev->component_id = tmp[0] << 8 | tmp[1]; |
| 2976 |
edev->component_revision_id = |
| 2977 |
manufacture_reply->component_revision_id; |
| 2978 |
} |
| 2979 |
} else { |
| 2980 |
printk(MYIOC_s_ERR_FMT |
| 2981 |
"%s: smp passthru reply failed to be returned\n", |
| 2982 |
ioc->name, __func__); |
| 2983 |
ret = -ENXIO; |
| 2984 |
} |
| 2985 |
out_free: |
| 2986 |
if (data_out_dma) |
| 2987 |
dma_free_coherent(&ioc->pcidev->dev, sz, data_out, |
| 2988 |
data_out_dma); |
| 2989 |
put_mf: |
| 2990 |
if (mf) |
| 2991 |
mpt_free_msg_frame(ioc, mf); |
| 2992 |
out_unlock: |
| 2993 |
CLEAR_MGMT_STATUS(ioc->sas_mgmt.status) |
| 2994 |
mutex_unlock(&ioc->sas_mgmt.mutex); |
| 2995 |
out: |
| 2996 |
return ret; |
| 2997 |
} |
| 2998 |
|
| 2999 |
static void |
| 3000 |
mptsas_parse_device_info(struct sas_identify *identify, |
| 3001 |
struct mptsas_devinfo *device_info) |
| 3002 |
{ |
| 3003 |
u16 protocols; |
| 3004 |
|
| 3005 |
identify->sas_address = device_info->sas_address; |
| 3006 |
identify->phy_identifier = device_info->phy_id; |
| 3007 |
|
| 3008 |
/* |
| 3009 |
* Fill in Phy Initiator Port Protocol. |
| 3010 |
* Bits 6:3, more than one bit can be set, fall through cases. |
| 3011 |
*/ |
| 3012 |
protocols = device_info->device_info & 0x78; |
| 3013 |
identify->initiator_port_protocols = 0; |
| 3014 |
if (protocols & MPI_SAS_DEVICE_INFO_SSP_INITIATOR) |
| 3015 |
identify->initiator_port_protocols |= SAS_PROTOCOL_SSP; |
| 3016 |
if (protocols & MPI_SAS_DEVICE_INFO_STP_INITIATOR) |
| 3017 |
identify->initiator_port_protocols |= SAS_PROTOCOL_STP; |
| 3018 |
if (protocols & MPI_SAS_DEVICE_INFO_SMP_INITIATOR) |
| 3019 |
identify->initiator_port_protocols |= SAS_PROTOCOL_SMP; |
| 3020 |
if (protocols & MPI_SAS_DEVICE_INFO_SATA_HOST) |
| 3021 |
identify->initiator_port_protocols |= SAS_PROTOCOL_SATA; |
| 3022 |
|
| 3023 |
/* |
| 3024 |
* Fill in Phy Target Port Protocol. |
| 3025 |
* Bits 10:7, more than one bit can be set, fall through cases. |
| 3026 |
*/ |
| 3027 |
protocols = device_info->device_info & 0x780; |
| 3028 |
identify->target_port_protocols = 0; |
| 3029 |
if (protocols & MPI_SAS_DEVICE_INFO_SSP_TARGET) |
| 3030 |
identify->target_port_protocols |= SAS_PROTOCOL_SSP; |
| 3031 |
if (protocols & MPI_SAS_DEVICE_INFO_STP_TARGET) |
| 3032 |
identify->target_port_protocols |= SAS_PROTOCOL_STP; |
| 3033 |
if (protocols & MPI_SAS_DEVICE_INFO_SMP_TARGET) |
| 3034 |
identify->target_port_protocols |= SAS_PROTOCOL_SMP; |
| 3035 |
if (protocols & MPI_SAS_DEVICE_INFO_SATA_DEVICE) |
| 3036 |
identify->target_port_protocols |= SAS_PROTOCOL_SATA; |
| 3037 |
|
| 3038 |
/* |
| 3039 |
* Fill in Attached device type. |
| 3040 |
*/ |
| 3041 |
switch (device_info->device_info & |
| 3042 |
MPI_SAS_DEVICE_INFO_MASK_DEVICE_TYPE) { |
| 3043 |
case MPI_SAS_DEVICE_INFO_NO_DEVICE: |
| 3044 |
identify->device_type = SAS_PHY_UNUSED; |
| 3045 |
break; |
| 3046 |
case MPI_SAS_DEVICE_INFO_END_DEVICE: |
| 3047 |
identify->device_type = SAS_END_DEVICE; |
| 3048 |
break; |
| 3049 |
case MPI_SAS_DEVICE_INFO_EDGE_EXPANDER: |
| 3050 |
identify->device_type = SAS_EDGE_EXPANDER_DEVICE; |
| 3051 |
break; |
| 3052 |
case MPI_SAS_DEVICE_INFO_FANOUT_EXPANDER: |
| 3053 |
identify->device_type = SAS_FANOUT_EXPANDER_DEVICE; |
| 3054 |
break; |
| 3055 |
} |
| 3056 |
} |
| 3057 |
|
| 3058 |
static int mptsas_probe_one_phy(struct device *dev, |
| 3059 |
struct mptsas_phyinfo *phy_info, int index, int local) |
| 3060 |
{ |
| 3061 |
MPT_ADAPTER *ioc; |
| 3062 |
struct sas_phy *phy; |
| 3063 |
struct sas_port *port; |
| 3064 |
int error = 0; |
| 3065 |
VirtTarget *vtarget; |
| 3066 |
|
| 3067 |
if (!dev) { |
| 3068 |
error = -ENODEV; |
| 3069 |
goto out; |
| 3070 |
} |
| 3071 |
|
| 3072 |
if (!phy_info->phy) { |
| 3073 |
phy = sas_phy_alloc(dev, index); |
| 3074 |
if (!phy) { |
| 3075 |
error = -ENOMEM; |
| 3076 |
goto out; |
| 3077 |
} |
| 3078 |
} else |
| 3079 |
phy = phy_info->phy; |
| 3080 |
|
| 3081 |
mptsas_parse_device_info(&phy->identify, &phy_info->identify); |
| 3082 |
|
| 3083 |
/* |
| 3084 |
* Set Negotiated link rate. |
| 3085 |
*/ |
| 3086 |
switch (phy_info->negotiated_link_rate) { |
| 3087 |
case MPI_SAS_IOUNIT0_RATE_PHY_DISABLED: |
| 3088 |
phy->negotiated_linkrate = SAS_PHY_DISABLED; |
| 3089 |
break; |
| 3090 |
case MPI_SAS_IOUNIT0_RATE_FAILED_SPEED_NEGOTIATION: |
| 3091 |
phy->negotiated_linkrate = SAS_LINK_RATE_FAILED; |
| 3092 |
break; |
| 3093 |
case MPI_SAS_IOUNIT0_RATE_1_5: |
| 3094 |
phy->negotiated_linkrate = SAS_LINK_RATE_1_5_GBPS; |
| 3095 |
break; |
| 3096 |
case MPI_SAS_IOUNIT0_RATE_3_0: |
| 3097 |
phy->negotiated_linkrate = SAS_LINK_RATE_3_0_GBPS; |
| 3098 |
break; |
| 3099 |
case MPI_SAS_IOUNIT0_RATE_6_0: |
| 3100 |
phy->negotiated_linkrate = SAS_LINK_RATE_6_0_GBPS; |
| 3101 |
break; |
| 3102 |
case MPI_SAS_IOUNIT0_RATE_SATA_OOB_COMPLETE: |
| 3103 |
case MPI_SAS_IOUNIT0_RATE_UNKNOWN: |
| 3104 |
default: |
| 3105 |
phy->negotiated_linkrate = SAS_LINK_RATE_UNKNOWN; |
| 3106 |
break; |
| 3107 |
} |
| 3108 |
|
| 3109 |
/* |
| 3110 |
* Set Max hardware link rate. |
| 3111 |
*/ |
| 3112 |
switch (phy_info->hw_link_rate & MPI_SAS_PHY0_PRATE_MAX_RATE_MASK) { |
| 3113 |
case MPI_SAS_PHY0_HWRATE_MAX_RATE_1_5: |
| 3114 |
phy->maximum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS; |
| 3115 |
break; |
| 3116 |
case MPI_SAS_PHY0_PRATE_MAX_RATE_3_0: |
| 3117 |
phy->maximum_linkrate_hw = SAS_LINK_RATE_3_0_GBPS; |
| 3118 |
break; |
| 3119 |
default: |
| 3120 |
break; |
| 3121 |
} |
| 3122 |
|
| 3123 |
/* |
| 3124 |
* Set Max programmed link rate. |
| 3125 |
*/ |
| 3126 |
switch (phy_info->programmed_link_rate & |
| 3127 |
MPI_SAS_PHY0_PRATE_MAX_RATE_MASK) { |
| 3128 |
case MPI_SAS_PHY0_PRATE_MAX_RATE_1_5: |
| 3129 |
phy->maximum_linkrate = SAS_LINK_RATE_1_5_GBPS; |
| 3130 |
break; |
| 3131 |
case MPI_SAS_PHY0_PRATE_MAX_RATE_3_0: |
| 3132 |
phy->maximum_linkrate = SAS_LINK_RATE_3_0_GBPS; |
| 3133 |
break; |
| 3134 |
default: |
| 3135 |
break; |
| 3136 |
} |
| 3137 |
|
| 3138 |
/* |
| 3139 |
* Set Min hardware link rate. |
| 3140 |
*/ |
| 3141 |
switch (phy_info->hw_link_rate & MPI_SAS_PHY0_HWRATE_MIN_RATE_MASK) { |
| 3142 |
case MPI_SAS_PHY0_HWRATE_MIN_RATE_1_5: |
| 3143 |
phy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS; |
| 3144 |
break; |
| 3145 |
case MPI_SAS_PHY0_PRATE_MIN_RATE_3_0: |
| 3146 |
phy->minimum_linkrate_hw = SAS_LINK_RATE_3_0_GBPS; |
| 3147 |
break; |
| 3148 |
default: |
| 3149 |
break; |
| 3150 |
} |
| 3151 |
|
| 3152 |
/* |
| 3153 |
* Set Min programmed link rate. |
| 3154 |
*/ |
| 3155 |
switch (phy_info->programmed_link_rate & |
| 3156 |
MPI_SAS_PHY0_PRATE_MIN_RATE_MASK) { |
| 3157 |
case MPI_SAS_PHY0_PRATE_MIN_RATE_1_5: |
| 3158 |
phy->minimum_linkrate = SAS_LINK_RATE_1_5_GBPS; |
| 3159 |
break; |
| 3160 |
case MPI_SAS_PHY0_PRATE_MIN_RATE_3_0: |
| 3161 |
phy->minimum_linkrate = SAS_LINK_RATE_3_0_GBPS; |
| 3162 |
break; |
| 3163 |
default: |
| 3164 |
break; |
| 3165 |
} |
| 3166 |
|
| 3167 |
if (!phy_info->phy) { |
| 3168 |
|
| 3169 |
error = sas_phy_add(phy); |
| 3170 |
if (error) { |
| 3171 |
sas_phy_free(phy); |
| 3172 |
goto out; |
| 3173 |
} |
| 3174 |
phy_info->phy = phy; |
| 3175 |
} |
| 3176 |
|
| 3177 |
if (!phy_info->attached.handle || |
| 3178 |
!phy_info->port_details) |
| 3179 |
goto out; |
| 3180 |
|
| 3181 |
port = mptsas_get_port(phy_info); |
| 3182 |
ioc = phy_to_ioc(phy_info->phy); |
| 3183 |
|
| 3184 |
if (phy_info->sas_port_add_phy) { |
| 3185 |
|
| 3186 |
if (!port) { |
| 3187 |
port = sas_port_alloc_num(dev); |
| 3188 |
if (!port) { |
| 3189 |
error = -ENOMEM; |
| 3190 |
goto out; |
| 3191 |
} |
| 3192 |
error = sas_port_add(port); |
| 3193 |
if (error) { |
| 3194 |
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT |
| 3195 |
"%s: exit at line=%d\n", ioc->name, |
| 3196 |
__func__, __LINE__)); |
| 3197 |
goto out; |
| 3198 |
} |
| 3199 |
mptsas_set_port(ioc, phy_info, port); |
| 3200 |
devtprintk(ioc, dev_printk(KERN_DEBUG, &port->dev, |
| 3201 |
MYIOC_s_FMT "add port %d, sas_addr (0x%llx)\n", |
| 3202 |
ioc->name, port->port_identifier, |
| 3203 |
(unsigned long long)phy_info-> |
| 3204 |
attached.sas_address)); |
| 3205 |
} |
| 3206 |
dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 3207 |
"sas_port_add_phy: phy_id=%d\n", |
| 3208 |
ioc->name, phy_info->phy_id)); |
| 3209 |
sas_port_add_phy(port, phy_info->phy); |
| 3210 |
phy_info->sas_port_add_phy = 0; |
| 3211 |
devtprintk(ioc, dev_printk(KERN_DEBUG, &phy_info->phy->dev, |
| 3212 |
MYIOC_s_FMT "add phy %d, phy-obj (0x%p)\n", ioc->name, |
| 3213 |
phy_info->phy_id, phy_info->phy)); |
| 3214 |
} |
| 3215 |
if (!mptsas_get_rphy(phy_info) && port && !port->rphy) { |
| 3216 |
|
| 3217 |
struct sas_rphy *rphy; |
| 3218 |
struct device *parent; |
| 3219 |
struct sas_identify identify; |
| 3220 |
|
| 3221 |
parent = dev->parent->parent; |
| 3222 |
/* |
| 3223 |
* Let the hotplug_work thread handle processing |
| 3224 |
* the adding/removing of devices that occur |
| 3225 |
* after start of day. |
| 3226 |
*/ |
| 3227 |
if (mptsas_is_end_device(&phy_info->attached) && |
| 3228 |
phy_info->attached.handle_parent) { |
| 3229 |
goto out; |
| 3230 |
} |
| 3231 |
|
| 3232 |
mptsas_parse_device_info(&identify, &phy_info->attached); |
| 3233 |
if (scsi_is_host_device(parent)) { |
| 3234 |
struct mptsas_portinfo *port_info; |
| 3235 |
int i; |
| 3236 |
|
| 3237 |
port_info = ioc->hba_port_info; |
| 3238 |
|
| 3239 |
for (i = 0; i < port_info->num_phys; i++) |
| 3240 |
if (port_info->phy_info[i].identify.sas_address == |
| 3241 |
identify.sas_address) { |
| 3242 |
sas_port_mark_backlink(port); |
| 3243 |
goto out; |
| 3244 |
} |
| 3245 |
|
| 3246 |
} else if (scsi_is_sas_rphy(parent)) { |
| 3247 |
struct sas_rphy *parent_rphy = dev_to_rphy(parent); |
| 3248 |
if (identify.sas_address == |
| 3249 |
parent_rphy->identify.sas_address) { |
| 3250 |
sas_port_mark_backlink(port); |
| 3251 |
goto out; |
| 3252 |
} |
| 3253 |
} |
| 3254 |
|
| 3255 |
switch (identify.device_type) { |
| 3256 |
case SAS_END_DEVICE: |
| 3257 |
rphy = sas_end_device_alloc(port); |
| 3258 |
break; |
| 3259 |
case SAS_EDGE_EXPANDER_DEVICE: |
| 3260 |
case SAS_FANOUT_EXPANDER_DEVICE: |
| 3261 |
rphy = sas_expander_alloc(port, identify.device_type); |
| 3262 |
break; |
| 3263 |
default: |
| 3264 |
rphy = NULL; |
| 3265 |
break; |
| 3266 |
} |
| 3267 |
if (!rphy) { |
| 3268 |
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT |
| 3269 |
"%s: exit at line=%d\n", ioc->name, |
| 3270 |
__func__, __LINE__)); |
| 3271 |
goto out; |
| 3272 |
} |
| 3273 |
|
| 3274 |
rphy->identify = identify; |
| 3275 |
error = sas_rphy_add(rphy); |
| 3276 |
if (error) { |
| 3277 |
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT |
| 3278 |
"%s: exit at line=%d\n", ioc->name, |
| 3279 |
__func__, __LINE__)); |
| 3280 |
sas_rphy_free(rphy); |
| 3281 |
goto out; |
| 3282 |
} |
| 3283 |
mptsas_set_rphy(ioc, phy_info, rphy); |
| 3284 |
if (identify.device_type == SAS_EDGE_EXPANDER_DEVICE || |
| 3285 |
identify.device_type == SAS_FANOUT_EXPANDER_DEVICE) |
| 3286 |
mptsas_exp_repmanufacture_info(ioc, |
| 3287 |
identify.sas_address, |
| 3288 |
rphy_to_expander_device(rphy)); |
| 3289 |
} |
| 3290 |
|
| 3291 |
/* If the device exists, verify it wasn't previously flagged |
| 3292 |
as a missing device. If so, clear it */ |
| 3293 |
vtarget = mptsas_find_vtarget(ioc, |
| 3294 |
phy_info->attached.channel, |
| 3295 |
phy_info->attached.id); |
| 3296 |
if (vtarget && vtarget->inDMD) { |
| 3297 |
printk(KERN_INFO "Device returned, unsetting inDMD\n"); |
| 3298 |
vtarget->inDMD = 0; |
| 3299 |
} |
| 3300 |
|
| 3301 |
out: |
| 3302 |
return error; |
| 3303 |
} |
| 3304 |
|
| 3305 |
static int |
| 3306 |
mptsas_probe_hba_phys(MPT_ADAPTER *ioc) |
| 3307 |
{ |
| 3308 |
struct mptsas_portinfo *port_info, *hba; |
| 3309 |
int error = -ENOMEM, i; |
| 3310 |
|
| 3311 |
hba = kzalloc_obj(struct mptsas_portinfo); |
| 3312 |
if (! hba) |
| 3313 |
goto out; |
| 3314 |
|
| 3315 |
error = mptsas_sas_io_unit_pg0(ioc, hba); |
| 3316 |
if (error) |
| 3317 |
goto out_free_port_info; |
| 3318 |
|
| 3319 |
mptsas_sas_io_unit_pg1(ioc); |
| 3320 |
mutex_lock(&ioc->sas_topology_mutex); |
| 3321 |
port_info = ioc->hba_port_info; |
| 3322 |
if (!port_info) { |
| 3323 |
ioc->hba_port_info = port_info = hba; |
| 3324 |
ioc->hba_port_num_phy = port_info->num_phys; |
| 3325 |
list_add_tail(&port_info->list, &ioc->sas_topology); |
| 3326 |
} else { |
| 3327 |
for (i = 0; i < hba->num_phys; i++) { |
| 3328 |
port_info->phy_info[i].negotiated_link_rate = |
| 3329 |
hba->phy_info[i].negotiated_link_rate; |
| 3330 |
port_info->phy_info[i].handle = |
| 3331 |
hba->phy_info[i].handle; |
| 3332 |
port_info->phy_info[i].port_id = |
| 3333 |
hba->phy_info[i].port_id; |
| 3334 |
} |
| 3335 |
kfree(hba->phy_info); |
| 3336 |
kfree(hba); |
| 3337 |
hba = NULL; |
| 3338 |
} |
| 3339 |
mutex_unlock(&ioc->sas_topology_mutex); |
| 3340 |
#if defined(CPQ_CIM) |
| 3341 |
ioc->num_ports = port_info->num_phys; |
| 3342 |
#endif |
| 3343 |
for (i = 0; i < port_info->num_phys; i++) { |
| 3344 |
mptsas_sas_phy_pg0(ioc, &port_info->phy_info[i], |
| 3345 |
(MPI_SAS_PHY_PGAD_FORM_PHY_NUMBER << |
| 3346 |
MPI_SAS_PHY_PGAD_FORM_SHIFT), i); |
| 3347 |
port_info->phy_info[i].identify.handle = |
| 3348 |
port_info->phy_info[i].handle; |
| 3349 |
mptsas_sas_device_pg0(ioc, &port_info->phy_info[i].identify, |
| 3350 |
(MPI_SAS_DEVICE_PGAD_FORM_HANDLE << |
| 3351 |
MPI_SAS_DEVICE_PGAD_FORM_SHIFT), |
| 3352 |
port_info->phy_info[i].identify.handle); |
| 3353 |
if (!ioc->hba_port_sas_addr) |
| 3354 |
ioc->hba_port_sas_addr = |
| 3355 |
port_info->phy_info[i].identify.sas_address; |
| 3356 |
port_info->phy_info[i].identify.phy_id = |
| 3357 |
port_info->phy_info[i].phy_id = i; |
| 3358 |
if (port_info->phy_info[i].attached.handle) |
| 3359 |
mptsas_sas_device_pg0(ioc, |
| 3360 |
&port_info->phy_info[i].attached, |
| 3361 |
(MPI_SAS_DEVICE_PGAD_FORM_HANDLE << |
| 3362 |
MPI_SAS_DEVICE_PGAD_FORM_SHIFT), |
| 3363 |
port_info->phy_info[i].attached.handle); |
| 3364 |
} |
| 3365 |
|
| 3366 |
mptsas_setup_wide_ports(ioc, port_info); |
| 3367 |
|
| 3368 |
for (i = 0; i < port_info->num_phys; i++, ioc->sas_index++) |
| 3369 |
mptsas_probe_one_phy(&ioc->sh->shost_gendev, |
| 3370 |
&port_info->phy_info[i], ioc->sas_index, 1); |
| 3371 |
|
| 3372 |
return 0; |
| 3373 |
|
| 3374 |
out_free_port_info: |
| 3375 |
kfree(hba); |
| 3376 |
out: |
| 3377 |
return error; |
| 3378 |
} |
| 3379 |
|
| 3380 |
static void |
| 3381 |
mptsas_expander_refresh(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info) |
| 3382 |
{ |
| 3383 |
struct mptsas_portinfo *parent; |
| 3384 |
struct device *parent_dev; |
| 3385 |
struct sas_rphy *rphy; |
| 3386 |
int i; |
| 3387 |
u64 sas_address; /* expander sas address */ |
| 3388 |
u32 handle; |
| 3389 |
|
| 3390 |
handle = port_info->phy_info[0].handle; |
| 3391 |
sas_address = port_info->phy_info[0].identify.sas_address; |
| 3392 |
for (i = 0; i < port_info->num_phys; i++) { |
| 3393 |
mptsas_sas_expander_pg1(ioc, &port_info->phy_info[i], |
| 3394 |
(MPI_SAS_EXPAND_PGAD_FORM_HANDLE_PHY_NUM << |
| 3395 |
MPI_SAS_EXPAND_PGAD_FORM_SHIFT), (i << 16) + handle); |
| 3396 |
|
| 3397 |
mptsas_sas_device_pg0(ioc, |
| 3398 |
&port_info->phy_info[i].identify, |
| 3399 |
(MPI_SAS_DEVICE_PGAD_FORM_HANDLE << |
| 3400 |
MPI_SAS_DEVICE_PGAD_FORM_SHIFT), |
| 3401 |
port_info->phy_info[i].identify.handle); |
| 3402 |
port_info->phy_info[i].identify.phy_id = |
| 3403 |
port_info->phy_info[i].phy_id; |
| 3404 |
|
| 3405 |
if (port_info->phy_info[i].attached.handle) { |
| 3406 |
mptsas_sas_device_pg0(ioc, |
| 3407 |
&port_info->phy_info[i].attached, |
| 3408 |
(MPI_SAS_DEVICE_PGAD_FORM_HANDLE << |
| 3409 |
MPI_SAS_DEVICE_PGAD_FORM_SHIFT), |
| 3410 |
port_info->phy_info[i].attached.handle); |
| 3411 |
port_info->phy_info[i].attached.phy_id = |
| 3412 |
port_info->phy_info[i].phy_id; |
| 3413 |
} |
| 3414 |
} |
| 3415 |
|
| 3416 |
mutex_lock(&ioc->sas_topology_mutex); |
| 3417 |
parent = mptsas_find_portinfo_by_handle(ioc, |
| 3418 |
port_info->phy_info[0].identify.handle_parent); |
| 3419 |
if (!parent) { |
| 3420 |
mutex_unlock(&ioc->sas_topology_mutex); |
| 3421 |
return; |
| 3422 |
} |
| 3423 |
for (i = 0, parent_dev = NULL; i < parent->num_phys && !parent_dev; |
| 3424 |
i++) { |
| 3425 |
if (parent->phy_info[i].attached.sas_address == sas_address) { |
| 3426 |
rphy = mptsas_get_rphy(&parent->phy_info[i]); |
| 3427 |
parent_dev = &rphy->dev; |
| 3428 |
} |
| 3429 |
} |
| 3430 |
mutex_unlock(&ioc->sas_topology_mutex); |
| 3431 |
|
| 3432 |
mptsas_setup_wide_ports(ioc, port_info); |
| 3433 |
for (i = 0; i < port_info->num_phys; i++, ioc->sas_index++) |
| 3434 |
mptsas_probe_one_phy(parent_dev, &port_info->phy_info[i], |
| 3435 |
ioc->sas_index, 0); |
| 3436 |
} |
| 3437 |
|
| 3438 |
static void |
| 3439 |
mptsas_expander_event_add(MPT_ADAPTER *ioc, |
| 3440 |
MpiEventDataSasExpanderStatusChange_t *expander_data) |
| 3441 |
{ |
| 3442 |
struct mptsas_portinfo *port_info; |
| 3443 |
int i; |
| 3444 |
__le64 sas_address; |
| 3445 |
|
| 3446 |
port_info = kzalloc_obj(struct mptsas_portinfo); |
| 3447 |
BUG_ON(!port_info); |
| 3448 |
port_info->num_phys = (expander_data->NumPhys) ? |
| 3449 |
expander_data->NumPhys : 1; |
| 3450 |
port_info->phy_info = kzalloc_objs(struct mptsas_phyinfo, |
| 3451 |
port_info->num_phys); |
| 3452 |
BUG_ON(!port_info->phy_info); |
| 3453 |
memcpy(&sas_address, &expander_data->SASAddress, sizeof(__le64)); |
| 3454 |
for (i = 0; i < port_info->num_phys; i++) { |
| 3455 |
port_info->phy_info[i].portinfo = port_info; |
| 3456 |
port_info->phy_info[i].handle = |
| 3457 |
le16_to_cpu(expander_data->DevHandle); |
| 3458 |
port_info->phy_info[i].identify.sas_address = |
| 3459 |
le64_to_cpu(sas_address); |
| 3460 |
port_info->phy_info[i].identify.handle_parent = |
| 3461 |
le16_to_cpu(expander_data->ParentDevHandle); |
| 3462 |
} |
| 3463 |
|
| 3464 |
mutex_lock(&ioc->sas_topology_mutex); |
| 3465 |
list_add_tail(&port_info->list, &ioc->sas_topology); |
| 3466 |
mutex_unlock(&ioc->sas_topology_mutex); |
| 3467 |
|
| 3468 |
printk(MYIOC_s_INFO_FMT "add expander: num_phys %d, " |
| 3469 |
"sas_addr (0x%llx)\n", ioc->name, port_info->num_phys, |
| 3470 |
(unsigned long long)sas_address); |
| 3471 |
|
| 3472 |
mptsas_expander_refresh(ioc, port_info); |
| 3473 |
} |
| 3474 |
|
| 3475 |
/** |
| 3476 |
* mptsas_delete_expander_siblings - remove siblings attached to expander |
| 3477 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 3478 |
* @parent: the parent port_info object |
| 3479 |
* @expander: the expander port_info object |
| 3480 |
**/ |
| 3481 |
static void |
| 3482 |
mptsas_delete_expander_siblings(MPT_ADAPTER *ioc, struct mptsas_portinfo |
| 3483 |
*parent, struct mptsas_portinfo *expander) |
| 3484 |
{ |
| 3485 |
struct mptsas_phyinfo *phy_info; |
| 3486 |
struct mptsas_portinfo *port_info; |
| 3487 |
struct sas_rphy *rphy; |
| 3488 |
int i; |
| 3489 |
|
| 3490 |
phy_info = expander->phy_info; |
| 3491 |
for (i = 0; i < expander->num_phys; i++, phy_info++) { |
| 3492 |
rphy = mptsas_get_rphy(phy_info); |
| 3493 |
if (!rphy) |
| 3494 |
continue; |
| 3495 |
if (rphy->identify.device_type == SAS_END_DEVICE) |
| 3496 |
mptsas_del_end_device(ioc, phy_info); |
| 3497 |
} |
| 3498 |
|
| 3499 |
phy_info = expander->phy_info; |
| 3500 |
for (i = 0; i < expander->num_phys; i++, phy_info++) { |
| 3501 |
rphy = mptsas_get_rphy(phy_info); |
| 3502 |
if (!rphy) |
| 3503 |
continue; |
| 3504 |
if (rphy->identify.device_type == |
| 3505 |
MPI_SAS_DEVICE_INFO_EDGE_EXPANDER || |
| 3506 |
rphy->identify.device_type == |
| 3507 |
MPI_SAS_DEVICE_INFO_FANOUT_EXPANDER) { |
| 3508 |
port_info = mptsas_find_portinfo_by_sas_address(ioc, |
| 3509 |
rphy->identify.sas_address); |
| 3510 |
if (!port_info) |
| 3511 |
continue; |
| 3512 |
if (port_info == parent) /* backlink rphy */ |
| 3513 |
continue; |
| 3514 |
/* |
| 3515 |
Delete this expander even if the expdevpage is exists |
| 3516 |
because the parent expander is already deleted |
| 3517 |
*/ |
| 3518 |
mptsas_expander_delete(ioc, port_info, 1); |
| 3519 |
} |
| 3520 |
} |
| 3521 |
} |
| 3522 |
|
| 3523 |
|
| 3524 |
/** |
| 3525 |
* mptsas_expander_delete - remove this expander |
| 3526 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 3527 |
* @port_info: expander port_info struct |
| 3528 |
* @force: Flag to forcefully delete the expander |
| 3529 |
* |
| 3530 |
**/ |
| 3531 |
|
| 3532 |
static void mptsas_expander_delete(MPT_ADAPTER *ioc, |
| 3533 |
struct mptsas_portinfo *port_info, u8 force) |
| 3534 |
{ |
| 3535 |
|
| 3536 |
struct mptsas_portinfo *parent; |
| 3537 |
int i; |
| 3538 |
u64 expander_sas_address; |
| 3539 |
struct mptsas_phyinfo *phy_info; |
| 3540 |
struct mptsas_portinfo buffer; |
| 3541 |
struct mptsas_portinfo_details *port_details; |
| 3542 |
struct sas_port *port; |
| 3543 |
|
| 3544 |
if (!port_info) |
| 3545 |
return; |
| 3546 |
|
| 3547 |
/* see if expander is still there before deleting */ |
| 3548 |
mptsas_sas_expander_pg0(ioc, &buffer, |
| 3549 |
(MPI_SAS_EXPAND_PGAD_FORM_HANDLE << |
| 3550 |
MPI_SAS_EXPAND_PGAD_FORM_SHIFT), |
| 3551 |
port_info->phy_info[0].identify.handle); |
| 3552 |
|
| 3553 |
if (buffer.num_phys) { |
| 3554 |
kfree(buffer.phy_info); |
| 3555 |
if (!force) |
| 3556 |
return; |
| 3557 |
} |
| 3558 |
|
| 3559 |
|
| 3560 |
/* |
| 3561 |
* Obtain the port_info instance to the parent port |
| 3562 |
*/ |
| 3563 |
port_details = NULL; |
| 3564 |
expander_sas_address = |
| 3565 |
port_info->phy_info[0].identify.sas_address; |
| 3566 |
parent = mptsas_find_portinfo_by_handle(ioc, |
| 3567 |
port_info->phy_info[0].identify.handle_parent); |
| 3568 |
mptsas_delete_expander_siblings(ioc, parent, port_info); |
| 3569 |
if (!parent) |
| 3570 |
goto out; |
| 3571 |
|
| 3572 |
/* |
| 3573 |
* Delete rphys in the parent that point |
| 3574 |
* to this expander. |
| 3575 |
*/ |
| 3576 |
phy_info = parent->phy_info; |
| 3577 |
port = NULL; |
| 3578 |
for (i = 0; i < parent->num_phys; i++, phy_info++) { |
| 3579 |
if (!phy_info->phy) |
| 3580 |
continue; |
| 3581 |
if (phy_info->attached.sas_address != |
| 3582 |
expander_sas_address) |
| 3583 |
continue; |
| 3584 |
if (!port) { |
| 3585 |
port = mptsas_get_port(phy_info); |
| 3586 |
port_details = phy_info->port_details; |
| 3587 |
} |
| 3588 |
dev_printk(KERN_DEBUG, &phy_info->phy->dev, |
| 3589 |
MYIOC_s_FMT "delete phy %d, phy-obj (0x%p)\n", ioc->name, |
| 3590 |
phy_info->phy_id, phy_info->phy); |
| 3591 |
sas_port_delete_phy(port, phy_info->phy); |
| 3592 |
} |
| 3593 |
if (port) { |
| 3594 |
dev_printk(KERN_DEBUG, &port->dev, |
| 3595 |
MYIOC_s_FMT "delete port %d, sas_addr (0x%llx)\n", |
| 3596 |
ioc->name, port->port_identifier, |
| 3597 |
(unsigned long long)expander_sas_address); |
| 3598 |
sas_port_delete(port); |
| 3599 |
mptsas_port_delete(ioc, port_details); |
| 3600 |
} |
| 3601 |
out: |
| 3602 |
|
| 3603 |
printk(MYIOC_s_INFO_FMT "delete expander: num_phys %d, " |
| 3604 |
"sas_addr (0x%llx)\n", ioc->name, port_info->num_phys, |
| 3605 |
(unsigned long long)expander_sas_address); |
| 3606 |
|
| 3607 |
/* |
| 3608 |
* free link |
| 3609 |
*/ |
| 3610 |
list_del(&port_info->list); |
| 3611 |
kfree(port_info->phy_info); |
| 3612 |
kfree(port_info); |
| 3613 |
} |
| 3614 |
|
| 3615 |
|
| 3616 |
/** |
| 3617 |
* mptsas_send_expander_event - expanders events |
| 3618 |
* @fw_event: event data |
| 3619 |
* |
| 3620 |
* |
| 3621 |
* This function handles adding, removing, and refreshing |
| 3622 |
* device handles within the expander objects. |
| 3623 |
*/ |
| 3624 |
static void |
| 3625 |
mptsas_send_expander_event(struct fw_event_work *fw_event) |
| 3626 |
{ |
| 3627 |
MPT_ADAPTER *ioc; |
| 3628 |
MpiEventDataSasExpanderStatusChange_t *expander_data; |
| 3629 |
struct mptsas_portinfo *port_info; |
| 3630 |
__le64 sas_address; |
| 3631 |
int i; |
| 3632 |
|
| 3633 |
ioc = fw_event->ioc; |
| 3634 |
expander_data = (MpiEventDataSasExpanderStatusChange_t *) |
| 3635 |
fw_event->event_data; |
| 3636 |
memcpy(&sas_address, &expander_data->SASAddress, sizeof(__le64)); |
| 3637 |
sas_address = le64_to_cpu(sas_address); |
| 3638 |
port_info = mptsas_find_portinfo_by_sas_address(ioc, sas_address); |
| 3639 |
|
| 3640 |
if (expander_data->ReasonCode == MPI_EVENT_SAS_EXP_RC_ADDED) { |
| 3641 |
if (port_info) { |
| 3642 |
for (i = 0; i < port_info->num_phys; i++) { |
| 3643 |
port_info->phy_info[i].portinfo = port_info; |
| 3644 |
port_info->phy_info[i].handle = |
| 3645 |
le16_to_cpu(expander_data->DevHandle); |
| 3646 |
port_info->phy_info[i].identify.sas_address = |
| 3647 |
le64_to_cpu(sas_address); |
| 3648 |
port_info->phy_info[i].identify.handle_parent = |
| 3649 |
le16_to_cpu(expander_data->ParentDevHandle); |
| 3650 |
} |
| 3651 |
mptsas_expander_refresh(ioc, port_info); |
| 3652 |
} else if (!port_info && expander_data->NumPhys) |
| 3653 |
mptsas_expander_event_add(ioc, expander_data); |
| 3654 |
} else if (expander_data->ReasonCode == |
| 3655 |
MPI_EVENT_SAS_EXP_RC_NOT_RESPONDING) |
| 3656 |
mptsas_expander_delete(ioc, port_info, 0); |
| 3657 |
|
| 3658 |
mptsas_free_fw_event(ioc, fw_event); |
| 3659 |
} |
| 3660 |
|
| 3661 |
|
| 3662 |
/** |
| 3663 |
* mptsas_expander_add - adds a newly discovered expander |
| 3664 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 3665 |
* @handle: device handle |
| 3666 |
* |
| 3667 |
*/ |
| 3668 |
static struct mptsas_portinfo * |
| 3669 |
mptsas_expander_add(MPT_ADAPTER *ioc, u16 handle) |
| 3670 |
{ |
| 3671 |
struct mptsas_portinfo buffer, *port_info; |
| 3672 |
int i; |
| 3673 |
|
| 3674 |
if ((mptsas_sas_expander_pg0(ioc, &buffer, |
| 3675 |
(MPI_SAS_EXPAND_PGAD_FORM_HANDLE << |
| 3676 |
MPI_SAS_EXPAND_PGAD_FORM_SHIFT), handle))) |
| 3677 |
return NULL; |
| 3678 |
|
| 3679 |
port_info = kzalloc_obj(struct mptsas_portinfo); |
| 3680 |
if (!port_info) { |
| 3681 |
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT |
| 3682 |
"%s: exit at line=%d\n", ioc->name, |
| 3683 |
__func__, __LINE__)); |
| 3684 |
return NULL; |
| 3685 |
} |
| 3686 |
port_info->num_phys = buffer.num_phys; |
| 3687 |
port_info->phy_info = buffer.phy_info; |
| 3688 |
for (i = 0; i < port_info->num_phys; i++) |
| 3689 |
port_info->phy_info[i].portinfo = port_info; |
| 3690 |
mutex_lock(&ioc->sas_topology_mutex); |
| 3691 |
list_add_tail(&port_info->list, &ioc->sas_topology); |
| 3692 |
mutex_unlock(&ioc->sas_topology_mutex); |
| 3693 |
printk(MYIOC_s_INFO_FMT "add expander: num_phys %d, " |
| 3694 |
"sas_addr (0x%llx)\n", ioc->name, port_info->num_phys, |
| 3695 |
(unsigned long long)buffer.phy_info[0].identify.sas_address); |
| 3696 |
mptsas_expander_refresh(ioc, port_info); |
| 3697 |
return port_info; |
| 3698 |
} |
| 3699 |
|
| 3700 |
static void |
| 3701 |
mptsas_send_link_status_event(struct fw_event_work *fw_event) |
| 3702 |
{ |
| 3703 |
MPT_ADAPTER *ioc; |
| 3704 |
MpiEventDataSasPhyLinkStatus_t *link_data; |
| 3705 |
struct mptsas_portinfo *port_info; |
| 3706 |
struct mptsas_phyinfo *phy_info = NULL; |
| 3707 |
__le64 sas_address; |
| 3708 |
u8 phy_num; |
| 3709 |
u8 link_rate; |
| 3710 |
|
| 3711 |
ioc = fw_event->ioc; |
| 3712 |
link_data = (MpiEventDataSasPhyLinkStatus_t *)fw_event->event_data; |
| 3713 |
|
| 3714 |
memcpy(&sas_address, &link_data->SASAddress, sizeof(__le64)); |
| 3715 |
sas_address = le64_to_cpu(sas_address); |
| 3716 |
link_rate = link_data->LinkRates >> 4; |
| 3717 |
phy_num = link_data->PhyNum; |
| 3718 |
|
| 3719 |
port_info = mptsas_find_portinfo_by_sas_address(ioc, sas_address); |
| 3720 |
if (port_info) { |
| 3721 |
phy_info = &port_info->phy_info[phy_num]; |
| 3722 |
if (phy_info) |
| 3723 |
phy_info->negotiated_link_rate = link_rate; |
| 3724 |
} |
| 3725 |
|
| 3726 |
if (link_rate == MPI_SAS_IOUNIT0_RATE_1_5 || |
| 3727 |
link_rate == MPI_SAS_IOUNIT0_RATE_3_0 || |
| 3728 |
link_rate == MPI_SAS_IOUNIT0_RATE_6_0) { |
| 3729 |
|
| 3730 |
if (!port_info) { |
| 3731 |
if (ioc->old_sas_discovery_protocal) { |
| 3732 |
port_info = mptsas_expander_add(ioc, |
| 3733 |
le16_to_cpu(link_data->DevHandle)); |
| 3734 |
if (port_info) |
| 3735 |
goto out; |
| 3736 |
} |
| 3737 |
goto out; |
| 3738 |
} |
| 3739 |
|
| 3740 |
if (port_info == ioc->hba_port_info) |
| 3741 |
mptsas_probe_hba_phys(ioc); |
| 3742 |
else |
| 3743 |
mptsas_expander_refresh(ioc, port_info); |
| 3744 |
} else if (phy_info && phy_info->phy) { |
| 3745 |
if (link_rate == MPI_SAS_IOUNIT0_RATE_PHY_DISABLED) |
| 3746 |
phy_info->phy->negotiated_linkrate = |
| 3747 |
SAS_PHY_DISABLED; |
| 3748 |
else if (link_rate == |
| 3749 |
MPI_SAS_IOUNIT0_RATE_FAILED_SPEED_NEGOTIATION) |
| 3750 |
phy_info->phy->negotiated_linkrate = |
| 3751 |
SAS_LINK_RATE_FAILED; |
| 3752 |
else { |
| 3753 |
phy_info->phy->negotiated_linkrate = |
| 3754 |
SAS_LINK_RATE_UNKNOWN; |
| 3755 |
if (ioc->device_missing_delay && |
| 3756 |
mptsas_is_end_device(&phy_info->attached)) { |
| 3757 |
struct scsi_device *sdev; |
| 3758 |
VirtDevice *vdevice; |
| 3759 |
u8 channel, id; |
| 3760 |
id = phy_info->attached.id; |
| 3761 |
channel = phy_info->attached.channel; |
| 3762 |
devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 3763 |
"Link down for fw_id %d:fw_channel %d\n", |
| 3764 |
ioc->name, phy_info->attached.id, |
| 3765 |
phy_info->attached.channel)); |
| 3766 |
|
| 3767 |
shost_for_each_device(sdev, ioc->sh) { |
| 3768 |
vdevice = sdev->hostdata; |
| 3769 |
if ((vdevice == NULL) || |
| 3770 |
(vdevice->vtarget == NULL)) |
| 3771 |
continue; |
| 3772 |
if ((vdevice->vtarget->tflags & |
| 3773 |
MPT_TARGET_FLAGS_RAID_COMPONENT || |
| 3774 |
vdevice->vtarget->raidVolume)) |
| 3775 |
continue; |
| 3776 |
if (vdevice->vtarget->id == id && |
| 3777 |
vdevice->vtarget->channel == |
| 3778 |
channel) |
| 3779 |
devtprintk(ioc, |
| 3780 |
printk(MYIOC_s_DEBUG_FMT |
| 3781 |
"SDEV OUTSTANDING CMDS" |
| 3782 |
"%d\n", ioc->name, |
| 3783 |
scsi_device_busy(sdev))); |
| 3784 |
} |
| 3785 |
|
| 3786 |
} |
| 3787 |
} |
| 3788 |
} |
| 3789 |
out: |
| 3790 |
mptsas_free_fw_event(ioc, fw_event); |
| 3791 |
} |
| 3792 |
|
| 3793 |
static void |
| 3794 |
mptsas_not_responding_devices(MPT_ADAPTER *ioc) |
| 3795 |
{ |
| 3796 |
struct mptsas_portinfo buffer, *port_info; |
| 3797 |
struct mptsas_device_info *sas_info; |
| 3798 |
struct mptsas_devinfo sas_device; |
| 3799 |
u32 handle; |
| 3800 |
VirtTarget *vtarget = NULL; |
| 3801 |
struct mptsas_phyinfo *phy_info; |
| 3802 |
u8 found_expander; |
| 3803 |
int retval, retry_count; |
| 3804 |
unsigned long flags; |
| 3805 |
|
| 3806 |
mpt_findImVolumes(ioc); |
| 3807 |
|
| 3808 |
spin_lock_irqsave(&ioc->taskmgmt_lock, flags); |
| 3809 |
if (ioc->ioc_reset_in_progress) { |
| 3810 |
dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 3811 |
"%s: exiting due to a parallel reset \n", ioc->name, |
| 3812 |
__func__)); |
| 3813 |
spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); |
| 3814 |
return; |
| 3815 |
} |
| 3816 |
spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); |
| 3817 |
|
| 3818 |
/* devices, logical volumes */ |
| 3819 |
mutex_lock(&ioc->sas_device_info_mutex); |
| 3820 |
redo_device_scan: |
| 3821 |
list_for_each_entry(sas_info, &ioc->sas_device_info_list, list) { |
| 3822 |
if (sas_info->is_cached) |
| 3823 |
continue; |
| 3824 |
if (!sas_info->is_logical_volume) { |
| 3825 |
sas_device.handle = 0; |
| 3826 |
retry_count = 0; |
| 3827 |
retry_page: |
| 3828 |
retval = mptsas_sas_device_pg0(ioc, &sas_device, |
| 3829 |
(MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID |
| 3830 |
<< MPI_SAS_DEVICE_PGAD_FORM_SHIFT), |
| 3831 |
(sas_info->fw.channel << 8) + |
| 3832 |
sas_info->fw.id); |
| 3833 |
|
| 3834 |
if (sas_device.handle) |
| 3835 |
continue; |
| 3836 |
if (retval == -EBUSY) { |
| 3837 |
spin_lock_irqsave(&ioc->taskmgmt_lock, flags); |
| 3838 |
if (ioc->ioc_reset_in_progress) { |
| 3839 |
dfailprintk(ioc, |
| 3840 |
printk(MYIOC_s_DEBUG_FMT |
| 3841 |
"%s: exiting due to reset\n", |
| 3842 |
ioc->name, __func__)); |
| 3843 |
spin_unlock_irqrestore |
| 3844 |
(&ioc->taskmgmt_lock, flags); |
| 3845 |
mutex_unlock(&ioc-> |
| 3846 |
sas_device_info_mutex); |
| 3847 |
return; |
| 3848 |
} |
| 3849 |
spin_unlock_irqrestore(&ioc->taskmgmt_lock, |
| 3850 |
flags); |
| 3851 |
} |
| 3852 |
|
| 3853 |
if (retval && (retval != -ENODEV)) { |
| 3854 |
if (retry_count < 10) { |
| 3855 |
retry_count++; |
| 3856 |
goto retry_page; |
| 3857 |
} else { |
| 3858 |
devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 3859 |
"%s: Config page retry exceeded retry " |
| 3860 |
"count deleting device 0x%llx\n", |
| 3861 |
ioc->name, __func__, |
| 3862 |
sas_info->sas_address)); |
| 3863 |
} |
| 3864 |
} |
| 3865 |
|
| 3866 |
/* delete device */ |
| 3867 |
vtarget = mptsas_find_vtarget(ioc, |
| 3868 |
sas_info->fw.channel, sas_info->fw.id); |
| 3869 |
|
| 3870 |
if (vtarget) |
| 3871 |
vtarget->deleted = 1; |
| 3872 |
|
| 3873 |
phy_info = mptsas_find_phyinfo_by_sas_address(ioc, |
| 3874 |
sas_info->sas_address); |
| 3875 |
|
| 3876 |
mptsas_del_end_device(ioc, phy_info); |
| 3877 |
goto redo_device_scan; |
| 3878 |
} else |
| 3879 |
mptsas_volume_delete(ioc, sas_info->fw.id); |
| 3880 |
} |
| 3881 |
mutex_unlock(&ioc->sas_device_info_mutex); |
| 3882 |
|
| 3883 |
/* expanders */ |
| 3884 |
mutex_lock(&ioc->sas_topology_mutex); |
| 3885 |
redo_expander_scan: |
| 3886 |
list_for_each_entry(port_info, &ioc->sas_topology, list) { |
| 3887 |
|
| 3888 |
if (!(port_info->phy_info[0].identify.device_info & |
| 3889 |
MPI_SAS_DEVICE_INFO_SMP_TARGET)) |
| 3890 |
continue; |
| 3891 |
found_expander = 0; |
| 3892 |
handle = 0xFFFF; |
| 3893 |
while (!mptsas_sas_expander_pg0(ioc, &buffer, |
| 3894 |
(MPI_SAS_EXPAND_PGAD_FORM_GET_NEXT_HANDLE << |
| 3895 |
MPI_SAS_EXPAND_PGAD_FORM_SHIFT), handle) && |
| 3896 |
!found_expander) { |
| 3897 |
|
| 3898 |
handle = buffer.phy_info[0].handle; |
| 3899 |
if (buffer.phy_info[0].identify.sas_address == |
| 3900 |
port_info->phy_info[0].identify.sas_address) { |
| 3901 |
found_expander = 1; |
| 3902 |
} |
| 3903 |
kfree(buffer.phy_info); |
| 3904 |
} |
| 3905 |
|
| 3906 |
if (!found_expander) { |
| 3907 |
mptsas_expander_delete(ioc, port_info, 0); |
| 3908 |
goto redo_expander_scan; |
| 3909 |
} |
| 3910 |
} |
| 3911 |
mutex_unlock(&ioc->sas_topology_mutex); |
| 3912 |
} |
| 3913 |
|
| 3914 |
/** |
| 3915 |
* mptsas_probe_expanders - adding expanders |
| 3916 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 3917 |
* |
| 3918 |
**/ |
| 3919 |
static void |
| 3920 |
mptsas_probe_expanders(MPT_ADAPTER *ioc) |
| 3921 |
{ |
| 3922 |
struct mptsas_portinfo buffer, *port_info; |
| 3923 |
u32 handle; |
| 3924 |
int i; |
| 3925 |
|
| 3926 |
handle = 0xFFFF; |
| 3927 |
while (!mptsas_sas_expander_pg0(ioc, &buffer, |
| 3928 |
(MPI_SAS_EXPAND_PGAD_FORM_GET_NEXT_HANDLE << |
| 3929 |
MPI_SAS_EXPAND_PGAD_FORM_SHIFT), handle)) { |
| 3930 |
|
| 3931 |
handle = buffer.phy_info[0].handle; |
| 3932 |
port_info = mptsas_find_portinfo_by_sas_address(ioc, |
| 3933 |
buffer.phy_info[0].identify.sas_address); |
| 3934 |
|
| 3935 |
if (port_info) { |
| 3936 |
/* refreshing handles */ |
| 3937 |
for (i = 0; i < buffer.num_phys; i++) { |
| 3938 |
port_info->phy_info[i].handle = handle; |
| 3939 |
port_info->phy_info[i].identify.handle_parent = |
| 3940 |
buffer.phy_info[0].identify.handle_parent; |
| 3941 |
} |
| 3942 |
mptsas_expander_refresh(ioc, port_info); |
| 3943 |
kfree(buffer.phy_info); |
| 3944 |
continue; |
| 3945 |
} |
| 3946 |
|
| 3947 |
port_info = kzalloc_obj(struct mptsas_portinfo); |
| 3948 |
if (!port_info) { |
| 3949 |
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT |
| 3950 |
"%s: exit at line=%d\n", ioc->name, |
| 3951 |
__func__, __LINE__)); |
| 3952 |
return; |
| 3953 |
} |
| 3954 |
port_info->num_phys = buffer.num_phys; |
| 3955 |
port_info->phy_info = buffer.phy_info; |
| 3956 |
for (i = 0; i < port_info->num_phys; i++) |
| 3957 |
port_info->phy_info[i].portinfo = port_info; |
| 3958 |
mutex_lock(&ioc->sas_topology_mutex); |
| 3959 |
list_add_tail(&port_info->list, &ioc->sas_topology); |
| 3960 |
mutex_unlock(&ioc->sas_topology_mutex); |
| 3961 |
printk(MYIOC_s_INFO_FMT "add expander: num_phys %d, " |
| 3962 |
"sas_addr (0x%llx)\n", ioc->name, port_info->num_phys, |
| 3963 |
(unsigned long long)buffer.phy_info[0].identify.sas_address); |
| 3964 |
mptsas_expander_refresh(ioc, port_info); |
| 3965 |
} |
| 3966 |
} |
| 3967 |
|
| 3968 |
static void |
| 3969 |
mptsas_probe_devices(MPT_ADAPTER *ioc) |
| 3970 |
{ |
| 3971 |
u16 handle; |
| 3972 |
struct mptsas_devinfo sas_device; |
| 3973 |
struct mptsas_phyinfo *phy_info; |
| 3974 |
|
| 3975 |
handle = 0xFFFF; |
| 3976 |
while (!(mptsas_sas_device_pg0(ioc, &sas_device, |
| 3977 |
MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE, handle))) { |
| 3978 |
|
| 3979 |
handle = sas_device.handle; |
| 3980 |
|
| 3981 |
if ((sas_device.device_info & |
| 3982 |
(MPI_SAS_DEVICE_INFO_SSP_TARGET | |
| 3983 |
MPI_SAS_DEVICE_INFO_STP_TARGET | |
| 3984 |
MPI_SAS_DEVICE_INFO_SATA_DEVICE)) == 0) |
| 3985 |
continue; |
| 3986 |
|
| 3987 |
/* If there is no FW B_T mapping for this device then continue |
| 3988 |
* */ |
| 3989 |
if (!(sas_device.flags & MPI_SAS_DEVICE0_FLAGS_DEVICE_PRESENT) |
| 3990 |
|| !(sas_device.flags & |
| 3991 |
MPI_SAS_DEVICE0_FLAGS_DEVICE_MAPPED)) |
| 3992 |
continue; |
| 3993 |
|
| 3994 |
phy_info = mptsas_refreshing_device_handles(ioc, &sas_device); |
| 3995 |
if (!phy_info) |
| 3996 |
continue; |
| 3997 |
|
| 3998 |
if (mptsas_get_rphy(phy_info)) |
| 3999 |
continue; |
| 4000 |
|
| 4001 |
mptsas_add_end_device(ioc, phy_info); |
| 4002 |
} |
| 4003 |
} |
| 4004 |
|
| 4005 |
/** |
| 4006 |
* mptsas_scan_sas_topology - scans new SAS topology |
| 4007 |
* (part of probe or rescan) |
| 4008 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 4009 |
* |
| 4010 |
**/ |
| 4011 |
static void |
| 4012 |
mptsas_scan_sas_topology(MPT_ADAPTER *ioc) |
| 4013 |
{ |
| 4014 |
struct scsi_device *sdev; |
| 4015 |
int i; |
| 4016 |
|
| 4017 |
mptsas_probe_hba_phys(ioc); |
| 4018 |
mptsas_probe_expanders(ioc); |
| 4019 |
mptsas_probe_devices(ioc); |
| 4020 |
|
| 4021 |
/* |
| 4022 |
Reporting RAID volumes. |
| 4023 |
*/ |
| 4024 |
if (!ioc->ir_firmware || !ioc->raid_data.pIocPg2 || |
| 4025 |
!ioc->raid_data.pIocPg2->NumActiveVolumes) |
| 4026 |
return; |
| 4027 |
for (i = 0; i < ioc->raid_data.pIocPg2->NumActiveVolumes; i++) { |
| 4028 |
sdev = scsi_device_lookup(ioc->sh, MPTSAS_RAID_CHANNEL, |
| 4029 |
ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID, 0); |
| 4030 |
if (sdev) { |
| 4031 |
scsi_device_put(sdev); |
| 4032 |
continue; |
| 4033 |
} |
| 4034 |
printk(MYIOC_s_INFO_FMT "attaching raid volume, channel %d, " |
| 4035 |
"id %d\n", ioc->name, MPTSAS_RAID_CHANNEL, |
| 4036 |
ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID); |
| 4037 |
scsi_add_device(ioc->sh, MPTSAS_RAID_CHANNEL, |
| 4038 |
ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID, 0); |
| 4039 |
} |
| 4040 |
} |
| 4041 |
|
| 4042 |
|
| 4043 |
static void |
| 4044 |
mptsas_handle_queue_full_event(struct fw_event_work *fw_event) |
| 4045 |
{ |
| 4046 |
MPT_ADAPTER *ioc; |
| 4047 |
EventDataQueueFull_t *qfull_data; |
| 4048 |
struct mptsas_device_info *sas_info; |
| 4049 |
struct scsi_device *sdev; |
| 4050 |
int depth; |
| 4051 |
int id = -1; |
| 4052 |
int channel = -1; |
| 4053 |
int fw_id, fw_channel; |
| 4054 |
u16 current_depth; |
| 4055 |
|
| 4056 |
|
| 4057 |
ioc = fw_event->ioc; |
| 4058 |
qfull_data = (EventDataQueueFull_t *)fw_event->event_data; |
| 4059 |
fw_id = qfull_data->TargetID; |
| 4060 |
fw_channel = qfull_data->Bus; |
| 4061 |
current_depth = le16_to_cpu(qfull_data->CurrentDepth); |
| 4062 |
|
| 4063 |
/* if hidden raid component, look for the volume id */ |
| 4064 |
mutex_lock(&ioc->sas_device_info_mutex); |
| 4065 |
if (mptscsih_is_phys_disk(ioc, fw_channel, fw_id)) { |
| 4066 |
list_for_each_entry(sas_info, &ioc->sas_device_info_list, |
| 4067 |
list) { |
| 4068 |
if (sas_info->is_cached || |
| 4069 |
sas_info->is_logical_volume) |
| 4070 |
continue; |
| 4071 |
if (sas_info->is_hidden_raid_component && |
| 4072 |
(sas_info->fw.channel == fw_channel && |
| 4073 |
sas_info->fw.id == fw_id)) { |
| 4074 |
id = sas_info->volume_id; |
| 4075 |
channel = MPTSAS_RAID_CHANNEL; |
| 4076 |
goto out; |
| 4077 |
} |
| 4078 |
} |
| 4079 |
} else { |
| 4080 |
list_for_each_entry(sas_info, &ioc->sas_device_info_list, |
| 4081 |
list) { |
| 4082 |
if (sas_info->is_cached || |
| 4083 |
sas_info->is_hidden_raid_component || |
| 4084 |
sas_info->is_logical_volume) |
| 4085 |
continue; |
| 4086 |
if (sas_info->fw.channel == fw_channel && |
| 4087 |
sas_info->fw.id == fw_id) { |
| 4088 |
id = sas_info->os.id; |
| 4089 |
channel = sas_info->os.channel; |
| 4090 |
goto out; |
| 4091 |
} |
| 4092 |
} |
| 4093 |
|
| 4094 |
} |
| 4095 |
|
| 4096 |
out: |
| 4097 |
mutex_unlock(&ioc->sas_device_info_mutex); |
| 4098 |
|
| 4099 |
if (id != -1) { |
| 4100 |
shost_for_each_device(sdev, ioc->sh) { |
| 4101 |
if (sdev->id == id && sdev->channel == channel) { |
| 4102 |
if (current_depth > sdev->queue_depth) { |
| 4103 |
sdev_printk(KERN_INFO, sdev, |
| 4104 |
"strange observation, the queue " |
| 4105 |
"depth is (%d) meanwhile fw queue " |
| 4106 |
"depth (%d)\n", sdev->queue_depth, |
| 4107 |
current_depth); |
| 4108 |
continue; |
| 4109 |
} |
| 4110 |
depth = scsi_track_queue_full(sdev, |
| 4111 |
sdev->queue_depth - 1); |
| 4112 |
if (depth > 0) |
| 4113 |
sdev_printk(KERN_INFO, sdev, |
| 4114 |
"Queue depth reduced to (%d)\n", |
| 4115 |
depth); |
| 4116 |
else if (depth < 0) |
| 4117 |
sdev_printk(KERN_INFO, sdev, |
| 4118 |
"Tagged Command Queueing is being " |
| 4119 |
"disabled\n"); |
| 4120 |
else if (depth == 0) |
| 4121 |
sdev_printk(KERN_DEBUG, sdev, |
| 4122 |
"Queue depth not changed yet\n"); |
| 4123 |
} |
| 4124 |
} |
| 4125 |
} |
| 4126 |
|
| 4127 |
mptsas_free_fw_event(ioc, fw_event); |
| 4128 |
} |
| 4129 |
|
| 4130 |
|
| 4131 |
static struct mptsas_phyinfo * |
| 4132 |
mptsas_find_phyinfo_by_sas_address(MPT_ADAPTER *ioc, u64 sas_address) |
| 4133 |
{ |
| 4134 |
struct mptsas_portinfo *port_info; |
| 4135 |
struct mptsas_phyinfo *phy_info = NULL; |
| 4136 |
int i; |
| 4137 |
|
| 4138 |
mutex_lock(&ioc->sas_topology_mutex); |
| 4139 |
list_for_each_entry(port_info, &ioc->sas_topology, list) { |
| 4140 |
for (i = 0; i < port_info->num_phys; i++) { |
| 4141 |
if (!mptsas_is_end_device( |
| 4142 |
&port_info->phy_info[i].attached)) |
| 4143 |
continue; |
| 4144 |
if (port_info->phy_info[i].attached.sas_address |
| 4145 |
!= sas_address) |
| 4146 |
continue; |
| 4147 |
phy_info = &port_info->phy_info[i]; |
| 4148 |
break; |
| 4149 |
} |
| 4150 |
} |
| 4151 |
mutex_unlock(&ioc->sas_topology_mutex); |
| 4152 |
return phy_info; |
| 4153 |
} |
| 4154 |
|
| 4155 |
/** |
| 4156 |
* mptsas_find_phyinfo_by_phys_disk_num - find phyinfo for the |
| 4157 |
* specified @phys_disk_num |
| 4158 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 4159 |
* @phys_disk_num: (hot plug) physical disk number (for RAID support) |
| 4160 |
* @channel: channel number |
| 4161 |
* @id: Logical Target ID |
| 4162 |
* |
| 4163 |
**/ |
| 4164 |
static struct mptsas_phyinfo * |
| 4165 |
mptsas_find_phyinfo_by_phys_disk_num(MPT_ADAPTER *ioc, u8 phys_disk_num, |
| 4166 |
u8 channel, u8 id) |
| 4167 |
{ |
| 4168 |
struct mptsas_phyinfo *phy_info = NULL; |
| 4169 |
struct mptsas_portinfo *port_info; |
| 4170 |
RaidPhysDiskPage1_t *phys_disk = NULL; |
| 4171 |
int num_paths; |
| 4172 |
u64 sas_address = 0; |
| 4173 |
int i; |
| 4174 |
|
| 4175 |
phy_info = NULL; |
| 4176 |
if (!ioc->raid_data.pIocPg3) |
| 4177 |
return NULL; |
| 4178 |
/* dual port support */ |
| 4179 |
num_paths = mpt_raid_phys_disk_get_num_paths(ioc, phys_disk_num); |
| 4180 |
if (!num_paths) |
| 4181 |
goto out; |
| 4182 |
phys_disk = kzalloc(offsetof(RaidPhysDiskPage1_t, Path) + |
| 4183 |
(num_paths * sizeof(RAID_PHYS_DISK1_PATH)), GFP_KERNEL); |
| 4184 |
if (!phys_disk) |
| 4185 |
goto out; |
| 4186 |
mpt_raid_phys_disk_pg1(ioc, phys_disk_num, phys_disk); |
| 4187 |
for (i = 0; i < num_paths; i++) { |
| 4188 |
if ((phys_disk->Path[i].Flags & 1) != 0) |
| 4189 |
/* entry no longer valid */ |
| 4190 |
continue; |
| 4191 |
if ((id == phys_disk->Path[i].PhysDiskID) && |
| 4192 |
(channel == phys_disk->Path[i].PhysDiskBus)) { |
| 4193 |
memcpy(&sas_address, &phys_disk->Path[i].WWID, |
| 4194 |
sizeof(u64)); |
| 4195 |
phy_info = mptsas_find_phyinfo_by_sas_address(ioc, |
| 4196 |
sas_address); |
| 4197 |
goto out; |
| 4198 |
} |
| 4199 |
} |
| 4200 |
|
| 4201 |
out: |
| 4202 |
kfree(phys_disk); |
| 4203 |
if (phy_info) |
| 4204 |
return phy_info; |
| 4205 |
|
| 4206 |
/* |
| 4207 |
* Extra code to handle RAID0 case, where the sas_address is not updated |
| 4208 |
* in phys_disk_page_1 when hotswapped |
| 4209 |
*/ |
| 4210 |
mutex_lock(&ioc->sas_topology_mutex); |
| 4211 |
list_for_each_entry(port_info, &ioc->sas_topology, list) { |
| 4212 |
for (i = 0; i < port_info->num_phys && !phy_info; i++) { |
| 4213 |
if (!mptsas_is_end_device( |
| 4214 |
&port_info->phy_info[i].attached)) |
| 4215 |
continue; |
| 4216 |
if (port_info->phy_info[i].attached.phys_disk_num == ~0) |
| 4217 |
continue; |
| 4218 |
if ((port_info->phy_info[i].attached.phys_disk_num == |
| 4219 |
phys_disk_num) && |
| 4220 |
(port_info->phy_info[i].attached.id == id) && |
| 4221 |
(port_info->phy_info[i].attached.channel == |
| 4222 |
channel)) |
| 4223 |
phy_info = &port_info->phy_info[i]; |
| 4224 |
} |
| 4225 |
} |
| 4226 |
mutex_unlock(&ioc->sas_topology_mutex); |
| 4227 |
return phy_info; |
| 4228 |
} |
| 4229 |
|
| 4230 |
static void |
| 4231 |
mptsas_reprobe_lun(struct scsi_device *sdev, void *data) |
| 4232 |
{ |
| 4233 |
sdev->no_uld_attach = data ? 1 : 0; |
| 4234 |
WARN_ON(scsi_device_reprobe(sdev)); |
| 4235 |
} |
| 4236 |
|
| 4237 |
static void |
| 4238 |
mptsas_reprobe_target(struct scsi_target *starget, int uld_attach) |
| 4239 |
{ |
| 4240 |
starget_for_each_device(starget, uld_attach ? (void *)1 : NULL, |
| 4241 |
mptsas_reprobe_lun); |
| 4242 |
} |
| 4243 |
|
| 4244 |
static void |
| 4245 |
mptsas_adding_inactive_raid_components(MPT_ADAPTER *ioc, u8 channel, u8 id) |
| 4246 |
{ |
| 4247 |
CONFIGPARMS cfg; |
| 4248 |
ConfigPageHeader_t hdr; |
| 4249 |
dma_addr_t dma_handle; |
| 4250 |
pRaidVolumePage0_t buffer = NULL; |
| 4251 |
RaidPhysDiskPage0_t phys_disk; |
| 4252 |
int i; |
| 4253 |
struct mptsas_phyinfo *phy_info; |
| 4254 |
struct mptsas_devinfo sas_device; |
| 4255 |
|
| 4256 |
memset(&cfg, 0 , sizeof(CONFIGPARMS)); |
| 4257 |
memset(&hdr, 0 , sizeof(ConfigPageHeader_t)); |
| 4258 |
hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_VOLUME; |
| 4259 |
cfg.pageAddr = (channel << 8) + id; |
| 4260 |
cfg.cfghdr.hdr = &hdr; |
| 4261 |
cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; |
| 4262 |
cfg.timeout = SAS_CONFIG_PAGE_TIMEOUT; |
| 4263 |
|
| 4264 |
if (mpt_config(ioc, &cfg) != 0) |
| 4265 |
goto out; |
| 4266 |
|
| 4267 |
if (!hdr.PageLength) |
| 4268 |
goto out; |
| 4269 |
|
| 4270 |
buffer = dma_alloc_coherent(&ioc->pcidev->dev, hdr.PageLength * 4, |
| 4271 |
&dma_handle, GFP_KERNEL); |
| 4272 |
|
| 4273 |
if (!buffer) |
| 4274 |
goto out; |
| 4275 |
|
| 4276 |
cfg.physAddr = dma_handle; |
| 4277 |
cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; |
| 4278 |
|
| 4279 |
if (mpt_config(ioc, &cfg) != 0) |
| 4280 |
goto out; |
| 4281 |
|
| 4282 |
if (!(buffer->VolumeStatus.Flags & |
| 4283 |
MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE)) |
| 4284 |
goto out; |
| 4285 |
|
| 4286 |
if (!buffer->NumPhysDisks) |
| 4287 |
goto out; |
| 4288 |
|
| 4289 |
for (i = 0; i < buffer->NumPhysDisks; i++) { |
| 4290 |
|
| 4291 |
if (mpt_raid_phys_disk_pg0(ioc, |
| 4292 |
buffer->PhysDisk[i].PhysDiskNum, &phys_disk) != 0) |
| 4293 |
continue; |
| 4294 |
|
| 4295 |
if (mptsas_sas_device_pg0(ioc, &sas_device, |
| 4296 |
(MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID << |
| 4297 |
MPI_SAS_DEVICE_PGAD_FORM_SHIFT), |
| 4298 |
(phys_disk.PhysDiskBus << 8) + |
| 4299 |
phys_disk.PhysDiskID)) |
| 4300 |
continue; |
| 4301 |
|
| 4302 |
/* If there is no FW B_T mapping for this device then continue |
| 4303 |
* */ |
| 4304 |
if (!(sas_device.flags & MPI_SAS_DEVICE0_FLAGS_DEVICE_PRESENT) |
| 4305 |
|| !(sas_device.flags & |
| 4306 |
MPI_SAS_DEVICE0_FLAGS_DEVICE_MAPPED)) |
| 4307 |
continue; |
| 4308 |
|
| 4309 |
|
| 4310 |
phy_info = mptsas_find_phyinfo_by_sas_address(ioc, |
| 4311 |
sas_device.sas_address); |
| 4312 |
mptsas_add_end_device(ioc, phy_info); |
| 4313 |
} |
| 4314 |
|
| 4315 |
out: |
| 4316 |
if (buffer) |
| 4317 |
dma_free_coherent(&ioc->pcidev->dev, hdr.PageLength * 4, |
| 4318 |
buffer, dma_handle); |
| 4319 |
} |
| 4320 |
/* |
| 4321 |
* Work queue thread to handle SAS hotplug events |
| 4322 |
*/ |
| 4323 |
static void |
| 4324 |
mptsas_hotplug_work(MPT_ADAPTER *ioc, struct fw_event_work *fw_event, |
| 4325 |
struct mptsas_hotplug_event *hot_plug_info) |
| 4326 |
{ |
| 4327 |
struct mptsas_phyinfo *phy_info; |
| 4328 |
struct scsi_target * starget; |
| 4329 |
struct mptsas_devinfo sas_device; |
| 4330 |
VirtTarget *vtarget; |
| 4331 |
int i; |
| 4332 |
struct mptsas_portinfo *port_info; |
| 4333 |
|
| 4334 |
switch (hot_plug_info->event_type) { |
| 4335 |
|
| 4336 |
case MPTSAS_ADD_PHYSDISK: |
| 4337 |
|
| 4338 |
if (!ioc->raid_data.pIocPg2) |
| 4339 |
break; |
| 4340 |
|
| 4341 |
for (i = 0; i < ioc->raid_data.pIocPg2->NumActiveVolumes; i++) { |
| 4342 |
if (ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID == |
| 4343 |
hot_plug_info->id) { |
| 4344 |
printk(MYIOC_s_WARN_FMT "firmware bug: unable " |
| 4345 |
"to add hidden disk - target_id matches " |
| 4346 |
"volume_id\n", ioc->name); |
| 4347 |
mptsas_free_fw_event(ioc, fw_event); |
| 4348 |
return; |
| 4349 |
} |
| 4350 |
} |
| 4351 |
mpt_findImVolumes(ioc); |
| 4352 |
fallthrough; |
| 4353 |
|
| 4354 |
case MPTSAS_ADD_DEVICE: |
| 4355 |
memset(&sas_device, 0, sizeof(struct mptsas_devinfo)); |
| 4356 |
mptsas_sas_device_pg0(ioc, &sas_device, |
| 4357 |
(MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID << |
| 4358 |
MPI_SAS_DEVICE_PGAD_FORM_SHIFT), |
| 4359 |
(hot_plug_info->channel << 8) + |
| 4360 |
hot_plug_info->id); |
| 4361 |
|
| 4362 |
/* If there is no FW B_T mapping for this device then break |
| 4363 |
* */ |
| 4364 |
if (!(sas_device.flags & MPI_SAS_DEVICE0_FLAGS_DEVICE_PRESENT) |
| 4365 |
|| !(sas_device.flags & |
| 4366 |
MPI_SAS_DEVICE0_FLAGS_DEVICE_MAPPED)) |
| 4367 |
break; |
| 4368 |
|
| 4369 |
if (!sas_device.handle) |
| 4370 |
return; |
| 4371 |
|
| 4372 |
phy_info = mptsas_refreshing_device_handles(ioc, &sas_device); |
| 4373 |
/* Device hot plug */ |
| 4374 |
if (!phy_info) { |
| 4375 |
devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 4376 |
"%s %d HOT PLUG: " |
| 4377 |
"parent handle of device %x\n", ioc->name, |
| 4378 |
__func__, __LINE__, sas_device.handle_parent)); |
| 4379 |
port_info = mptsas_find_portinfo_by_handle(ioc, |
| 4380 |
sas_device.handle_parent); |
| 4381 |
|
| 4382 |
if (port_info == ioc->hba_port_info) |
| 4383 |
mptsas_probe_hba_phys(ioc); |
| 4384 |
else if (port_info) |
| 4385 |
mptsas_expander_refresh(ioc, port_info); |
| 4386 |
else { |
| 4387 |
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT |
| 4388 |
"%s %d port info is NULL\n", |
| 4389 |
ioc->name, __func__, __LINE__)); |
| 4390 |
break; |
| 4391 |
} |
| 4392 |
phy_info = mptsas_refreshing_device_handles |
| 4393 |
(ioc, &sas_device); |
| 4394 |
} |
| 4395 |
|
| 4396 |
if (!phy_info) { |
| 4397 |
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT |
| 4398 |
"%s %d phy info is NULL\n", |
| 4399 |
ioc->name, __func__, __LINE__)); |
| 4400 |
break; |
| 4401 |
} |
| 4402 |
|
| 4403 |
if (mptsas_get_rphy(phy_info)) |
| 4404 |
break; |
| 4405 |
|
| 4406 |
mptsas_add_end_device(ioc, phy_info); |
| 4407 |
break; |
| 4408 |
|
| 4409 |
case MPTSAS_DEL_DEVICE: |
| 4410 |
phy_info = mptsas_find_phyinfo_by_sas_address(ioc, |
| 4411 |
hot_plug_info->sas_address); |
| 4412 |
mptsas_del_end_device(ioc, phy_info); |
| 4413 |
break; |
| 4414 |
|
| 4415 |
case MPTSAS_DEL_PHYSDISK: |
| 4416 |
|
| 4417 |
mpt_findImVolumes(ioc); |
| 4418 |
|
| 4419 |
phy_info = mptsas_find_phyinfo_by_phys_disk_num( |
| 4420 |
ioc, hot_plug_info->phys_disk_num, |
| 4421 |
hot_plug_info->channel, |
| 4422 |
hot_plug_info->id); |
| 4423 |
mptsas_del_end_device(ioc, phy_info); |
| 4424 |
break; |
| 4425 |
|
| 4426 |
case MPTSAS_ADD_PHYSDISK_REPROBE: |
| 4427 |
|
| 4428 |
if (mptsas_sas_device_pg0(ioc, &sas_device, |
| 4429 |
(MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID << |
| 4430 |
MPI_SAS_DEVICE_PGAD_FORM_SHIFT), |
| 4431 |
(hot_plug_info->channel << 8) + hot_plug_info->id)) { |
| 4432 |
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT |
| 4433 |
"%s: fw_id=%d exit at line=%d\n", ioc->name, |
| 4434 |
__func__, hot_plug_info->id, __LINE__)); |
| 4435 |
break; |
| 4436 |
} |
| 4437 |
|
| 4438 |
/* If there is no FW B_T mapping for this device then break |
| 4439 |
* */ |
| 4440 |
if (!(sas_device.flags & MPI_SAS_DEVICE0_FLAGS_DEVICE_PRESENT) |
| 4441 |
|| !(sas_device.flags & |
| 4442 |
MPI_SAS_DEVICE0_FLAGS_DEVICE_MAPPED)) |
| 4443 |
break; |
| 4444 |
|
| 4445 |
phy_info = mptsas_find_phyinfo_by_sas_address( |
| 4446 |
ioc, sas_device.sas_address); |
| 4447 |
|
| 4448 |
if (!phy_info) { |
| 4449 |
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT |
| 4450 |
"%s: fw_id=%d exit at line=%d\n", ioc->name, |
| 4451 |
__func__, hot_plug_info->id, __LINE__)); |
| 4452 |
break; |
| 4453 |
} |
| 4454 |
|
| 4455 |
starget = mptsas_get_starget(phy_info); |
| 4456 |
if (!starget) { |
| 4457 |
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT |
| 4458 |
"%s: fw_id=%d exit at line=%d\n", ioc->name, |
| 4459 |
__func__, hot_plug_info->id, __LINE__)); |
| 4460 |
break; |
| 4461 |
} |
| 4462 |
|
| 4463 |
vtarget = starget->hostdata; |
| 4464 |
if (!vtarget) { |
| 4465 |
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT |
| 4466 |
"%s: fw_id=%d exit at line=%d\n", ioc->name, |
| 4467 |
__func__, hot_plug_info->id, __LINE__)); |
| 4468 |
break; |
| 4469 |
} |
| 4470 |
|
| 4471 |
mpt_findImVolumes(ioc); |
| 4472 |
|
| 4473 |
starget_printk(KERN_INFO, starget, MYIOC_s_FMT "RAID Hidding: " |
| 4474 |
"fw_channel=%d, fw_id=%d, physdsk %d, sas_addr 0x%llx\n", |
| 4475 |
ioc->name, hot_plug_info->channel, hot_plug_info->id, |
| 4476 |
hot_plug_info->phys_disk_num, (unsigned long long) |
| 4477 |
sas_device.sas_address); |
| 4478 |
|
| 4479 |
vtarget->id = hot_plug_info->phys_disk_num; |
| 4480 |
vtarget->tflags |= MPT_TARGET_FLAGS_RAID_COMPONENT; |
| 4481 |
phy_info->attached.phys_disk_num = hot_plug_info->phys_disk_num; |
| 4482 |
mptsas_reprobe_target(starget, 1); |
| 4483 |
break; |
| 4484 |
|
| 4485 |
case MPTSAS_DEL_PHYSDISK_REPROBE: |
| 4486 |
|
| 4487 |
if (mptsas_sas_device_pg0(ioc, &sas_device, |
| 4488 |
(MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID << |
| 4489 |
MPI_SAS_DEVICE_PGAD_FORM_SHIFT), |
| 4490 |
(hot_plug_info->channel << 8) + hot_plug_info->id)) { |
| 4491 |
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT |
| 4492 |
"%s: fw_id=%d exit at line=%d\n", |
| 4493 |
ioc->name, __func__, |
| 4494 |
hot_plug_info->id, __LINE__)); |
| 4495 |
break; |
| 4496 |
} |
| 4497 |
|
| 4498 |
/* If there is no FW B_T mapping for this device then break |
| 4499 |
* */ |
| 4500 |
if (!(sas_device.flags & MPI_SAS_DEVICE0_FLAGS_DEVICE_PRESENT) |
| 4501 |
|| !(sas_device.flags & |
| 4502 |
MPI_SAS_DEVICE0_FLAGS_DEVICE_MAPPED)) |
| 4503 |
break; |
| 4504 |
|
| 4505 |
phy_info = mptsas_find_phyinfo_by_sas_address(ioc, |
| 4506 |
sas_device.sas_address); |
| 4507 |
if (!phy_info) { |
| 4508 |
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT |
| 4509 |
"%s: fw_id=%d exit at line=%d\n", ioc->name, |
| 4510 |
__func__, hot_plug_info->id, __LINE__)); |
| 4511 |
break; |
| 4512 |
} |
| 4513 |
|
| 4514 |
starget = mptsas_get_starget(phy_info); |
| 4515 |
if (!starget) { |
| 4516 |
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT |
| 4517 |
"%s: fw_id=%d exit at line=%d\n", ioc->name, |
| 4518 |
__func__, hot_plug_info->id, __LINE__)); |
| 4519 |
break; |
| 4520 |
} |
| 4521 |
|
| 4522 |
vtarget = starget->hostdata; |
| 4523 |
if (!vtarget) { |
| 4524 |
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT |
| 4525 |
"%s: fw_id=%d exit at line=%d\n", ioc->name, |
| 4526 |
__func__, hot_plug_info->id, __LINE__)); |
| 4527 |
break; |
| 4528 |
} |
| 4529 |
|
| 4530 |
if (!(vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT)) { |
| 4531 |
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT |
| 4532 |
"%s: fw_id=%d exit at line=%d\n", ioc->name, |
| 4533 |
__func__, hot_plug_info->id, __LINE__)); |
| 4534 |
break; |
| 4535 |
} |
| 4536 |
|
| 4537 |
mpt_findImVolumes(ioc); |
| 4538 |
|
| 4539 |
starget_printk(KERN_INFO, starget, MYIOC_s_FMT "RAID Exposing:" |
| 4540 |
" fw_channel=%d, fw_id=%d, physdsk %d, sas_addr 0x%llx\n", |
| 4541 |
ioc->name, hot_plug_info->channel, hot_plug_info->id, |
| 4542 |
hot_plug_info->phys_disk_num, (unsigned long long) |
| 4543 |
sas_device.sas_address); |
| 4544 |
|
| 4545 |
vtarget->tflags &= ~MPT_TARGET_FLAGS_RAID_COMPONENT; |
| 4546 |
vtarget->id = hot_plug_info->id; |
| 4547 |
phy_info->attached.phys_disk_num = ~0; |
| 4548 |
mptsas_reprobe_target(starget, 0); |
| 4549 |
mptsas_add_device_component_by_fw(ioc, |
| 4550 |
hot_plug_info->channel, hot_plug_info->id); |
| 4551 |
break; |
| 4552 |
|
| 4553 |
case MPTSAS_ADD_RAID: |
| 4554 |
|
| 4555 |
mpt_findImVolumes(ioc); |
| 4556 |
printk(MYIOC_s_INFO_FMT "attaching raid volume, channel %d, " |
| 4557 |
"id %d\n", ioc->name, MPTSAS_RAID_CHANNEL, |
| 4558 |
hot_plug_info->id); |
| 4559 |
scsi_add_device(ioc->sh, MPTSAS_RAID_CHANNEL, |
| 4560 |
hot_plug_info->id, 0); |
| 4561 |
break; |
| 4562 |
|
| 4563 |
case MPTSAS_DEL_RAID: |
| 4564 |
|
| 4565 |
mpt_findImVolumes(ioc); |
| 4566 |
printk(MYIOC_s_INFO_FMT "removing raid volume, channel %d, " |
| 4567 |
"id %d\n", ioc->name, MPTSAS_RAID_CHANNEL, |
| 4568 |
hot_plug_info->id); |
| 4569 |
scsi_remove_device(hot_plug_info->sdev); |
| 4570 |
scsi_device_put(hot_plug_info->sdev); |
| 4571 |
break; |
| 4572 |
|
| 4573 |
case MPTSAS_ADD_INACTIVE_VOLUME: |
| 4574 |
|
| 4575 |
mpt_findImVolumes(ioc); |
| 4576 |
mptsas_adding_inactive_raid_components(ioc, |
| 4577 |
hot_plug_info->channel, hot_plug_info->id); |
| 4578 |
break; |
| 4579 |
|
| 4580 |
default: |
| 4581 |
break; |
| 4582 |
} |
| 4583 |
|
| 4584 |
mptsas_free_fw_event(ioc, fw_event); |
| 4585 |
} |
| 4586 |
|
| 4587 |
static void |
| 4588 |
mptsas_send_sas_event(struct fw_event_work *fw_event) |
| 4589 |
{ |
| 4590 |
MPT_ADAPTER *ioc; |
| 4591 |
struct mptsas_hotplug_event hot_plug_info; |
| 4592 |
EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *sas_event_data; |
| 4593 |
u32 device_info; |
| 4594 |
u64 sas_address; |
| 4595 |
|
| 4596 |
ioc = fw_event->ioc; |
| 4597 |
sas_event_data = (EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *) |
| 4598 |
fw_event->event_data; |
| 4599 |
device_info = le32_to_cpu(sas_event_data->DeviceInfo); |
| 4600 |
|
| 4601 |
if ((device_info & |
| 4602 |
(MPI_SAS_DEVICE_INFO_SSP_TARGET | |
| 4603 |
MPI_SAS_DEVICE_INFO_STP_TARGET | |
| 4604 |
MPI_SAS_DEVICE_INFO_SATA_DEVICE)) == 0) { |
| 4605 |
mptsas_free_fw_event(ioc, fw_event); |
| 4606 |
return; |
| 4607 |
} |
| 4608 |
|
| 4609 |
if (sas_event_data->ReasonCode == |
| 4610 |
MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED) { |
| 4611 |
mptbase_sas_persist_operation(ioc, |
| 4612 |
MPI_SAS_OP_CLEAR_NOT_PRESENT); |
| 4613 |
mptsas_free_fw_event(ioc, fw_event); |
| 4614 |
return; |
| 4615 |
} |
| 4616 |
|
| 4617 |
switch (sas_event_data->ReasonCode) { |
| 4618 |
case MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING: |
| 4619 |
case MPI_EVENT_SAS_DEV_STAT_RC_ADDED: |
| 4620 |
memset(&hot_plug_info, 0, sizeof(struct mptsas_hotplug_event)); |
| 4621 |
hot_plug_info.handle = le16_to_cpu(sas_event_data->DevHandle); |
| 4622 |
hot_plug_info.channel = sas_event_data->Bus; |
| 4623 |
hot_plug_info.id = sas_event_data->TargetID; |
| 4624 |
hot_plug_info.phy_id = sas_event_data->PhyNum; |
| 4625 |
memcpy(&sas_address, &sas_event_data->SASAddress, |
| 4626 |
sizeof(u64)); |
| 4627 |
hot_plug_info.sas_address = le64_to_cpu(sas_address); |
| 4628 |
hot_plug_info.device_info = device_info; |
| 4629 |
if (sas_event_data->ReasonCode & |
| 4630 |
MPI_EVENT_SAS_DEV_STAT_RC_ADDED) |
| 4631 |
hot_plug_info.event_type = MPTSAS_ADD_DEVICE; |
| 4632 |
else |
| 4633 |
hot_plug_info.event_type = MPTSAS_DEL_DEVICE; |
| 4634 |
mptsas_hotplug_work(ioc, fw_event, &hot_plug_info); |
| 4635 |
break; |
| 4636 |
|
| 4637 |
case MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED: |
| 4638 |
mptbase_sas_persist_operation(ioc, |
| 4639 |
MPI_SAS_OP_CLEAR_NOT_PRESENT); |
| 4640 |
mptsas_free_fw_event(ioc, fw_event); |
| 4641 |
break; |
| 4642 |
|
| 4643 |
case MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA: |
| 4644 |
/* TODO */ |
| 4645 |
case MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET: |
| 4646 |
/* TODO */ |
| 4647 |
default: |
| 4648 |
mptsas_free_fw_event(ioc, fw_event); |
| 4649 |
break; |
| 4650 |
} |
| 4651 |
} |
| 4652 |
|
| 4653 |
static void |
| 4654 |
mptsas_send_raid_event(struct fw_event_work *fw_event) |
| 4655 |
{ |
| 4656 |
MPT_ADAPTER *ioc; |
| 4657 |
EVENT_DATA_RAID *raid_event_data; |
| 4658 |
struct mptsas_hotplug_event hot_plug_info; |
| 4659 |
int status; |
| 4660 |
int state; |
| 4661 |
struct scsi_device *sdev = NULL; |
| 4662 |
VirtDevice *vdevice = NULL; |
| 4663 |
RaidPhysDiskPage0_t phys_disk; |
| 4664 |
|
| 4665 |
ioc = fw_event->ioc; |
| 4666 |
raid_event_data = (EVENT_DATA_RAID *)fw_event->event_data; |
| 4667 |
status = le32_to_cpu(raid_event_data->SettingsStatus); |
| 4668 |
state = (status >> 8) & 0xff; |
| 4669 |
|
| 4670 |
memset(&hot_plug_info, 0, sizeof(struct mptsas_hotplug_event)); |
| 4671 |
hot_plug_info.id = raid_event_data->VolumeID; |
| 4672 |
hot_plug_info.channel = raid_event_data->VolumeBus; |
| 4673 |
hot_plug_info.phys_disk_num = raid_event_data->PhysDiskNum; |
| 4674 |
|
| 4675 |
if (raid_event_data->ReasonCode == MPI_EVENT_RAID_RC_VOLUME_DELETED || |
| 4676 |
raid_event_data->ReasonCode == MPI_EVENT_RAID_RC_VOLUME_CREATED || |
| 4677 |
raid_event_data->ReasonCode == |
| 4678 |
MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED) { |
| 4679 |
sdev = scsi_device_lookup(ioc->sh, MPTSAS_RAID_CHANNEL, |
| 4680 |
hot_plug_info.id, 0); |
| 4681 |
hot_plug_info.sdev = sdev; |
| 4682 |
if (sdev) |
| 4683 |
vdevice = sdev->hostdata; |
| 4684 |
} |
| 4685 |
|
| 4686 |
devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Entering %s: " |
| 4687 |
"ReasonCode=%02x\n", ioc->name, __func__, |
| 4688 |
raid_event_data->ReasonCode)); |
| 4689 |
|
| 4690 |
switch (raid_event_data->ReasonCode) { |
| 4691 |
case MPI_EVENT_RAID_RC_PHYSDISK_DELETED: |
| 4692 |
hot_plug_info.event_type = MPTSAS_DEL_PHYSDISK_REPROBE; |
| 4693 |
break; |
| 4694 |
case MPI_EVENT_RAID_RC_PHYSDISK_CREATED: |
| 4695 |
hot_plug_info.event_type = MPTSAS_ADD_PHYSDISK_REPROBE; |
| 4696 |
break; |
| 4697 |
case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED: |
| 4698 |
switch (state) { |
| 4699 |
case MPI_PD_STATE_ONLINE: |
| 4700 |
case MPI_PD_STATE_NOT_COMPATIBLE: |
| 4701 |
mpt_raid_phys_disk_pg0(ioc, |
| 4702 |
raid_event_data->PhysDiskNum, &phys_disk); |
| 4703 |
hot_plug_info.id = phys_disk.PhysDiskID; |
| 4704 |
hot_plug_info.channel = phys_disk.PhysDiskBus; |
| 4705 |
hot_plug_info.event_type = MPTSAS_ADD_PHYSDISK; |
| 4706 |
break; |
| 4707 |
case MPI_PD_STATE_FAILED: |
| 4708 |
case MPI_PD_STATE_MISSING: |
| 4709 |
case MPI_PD_STATE_OFFLINE_AT_HOST_REQUEST: |
| 4710 |
case MPI_PD_STATE_FAILED_AT_HOST_REQUEST: |
| 4711 |
case MPI_PD_STATE_OFFLINE_FOR_ANOTHER_REASON: |
| 4712 |
hot_plug_info.event_type = MPTSAS_DEL_PHYSDISK; |
| 4713 |
break; |
| 4714 |
default: |
| 4715 |
break; |
| 4716 |
} |
| 4717 |
break; |
| 4718 |
case MPI_EVENT_RAID_RC_VOLUME_DELETED: |
| 4719 |
if (!sdev) |
| 4720 |
break; |
| 4721 |
vdevice->vtarget->deleted = 1; /* block IO */ |
| 4722 |
hot_plug_info.event_type = MPTSAS_DEL_RAID; |
| 4723 |
break; |
| 4724 |
case MPI_EVENT_RAID_RC_VOLUME_CREATED: |
| 4725 |
if (sdev) { |
| 4726 |
scsi_device_put(sdev); |
| 4727 |
break; |
| 4728 |
} |
| 4729 |
hot_plug_info.event_type = MPTSAS_ADD_RAID; |
| 4730 |
break; |
| 4731 |
case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED: |
| 4732 |
if (!(status & MPI_RAIDVOL0_STATUS_FLAG_ENABLED)) { |
| 4733 |
if (!sdev) |
| 4734 |
break; |
| 4735 |
vdevice->vtarget->deleted = 1; /* block IO */ |
| 4736 |
hot_plug_info.event_type = MPTSAS_DEL_RAID; |
| 4737 |
break; |
| 4738 |
} |
| 4739 |
switch (state) { |
| 4740 |
case MPI_RAIDVOL0_STATUS_STATE_FAILED: |
| 4741 |
case MPI_RAIDVOL0_STATUS_STATE_MISSING: |
| 4742 |
if (!sdev) |
| 4743 |
break; |
| 4744 |
vdevice->vtarget->deleted = 1; /* block IO */ |
| 4745 |
hot_plug_info.event_type = MPTSAS_DEL_RAID; |
| 4746 |
break; |
| 4747 |
case MPI_RAIDVOL0_STATUS_STATE_OPTIMAL: |
| 4748 |
case MPI_RAIDVOL0_STATUS_STATE_DEGRADED: |
| 4749 |
if (sdev) { |
| 4750 |
scsi_device_put(sdev); |
| 4751 |
break; |
| 4752 |
} |
| 4753 |
hot_plug_info.event_type = MPTSAS_ADD_RAID; |
| 4754 |
break; |
| 4755 |
default: |
| 4756 |
break; |
| 4757 |
} |
| 4758 |
break; |
| 4759 |
default: |
| 4760 |
break; |
| 4761 |
} |
| 4762 |
|
| 4763 |
if (hot_plug_info.event_type != MPTSAS_IGNORE_EVENT) |
| 4764 |
mptsas_hotplug_work(ioc, fw_event, &hot_plug_info); |
| 4765 |
else |
| 4766 |
mptsas_free_fw_event(ioc, fw_event); |
| 4767 |
} |
| 4768 |
|
| 4769 |
/** |
| 4770 |
* mptsas_issue_tm - send mptsas internal tm request |
| 4771 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 4772 |
* @type: Task Management type |
| 4773 |
* @channel: channel number for task management |
| 4774 |
* @id: Logical Target ID for reset (if appropriate) |
| 4775 |
* @lun: Logical unit for reset (if appropriate) |
| 4776 |
* @task_context: Context for the task to be aborted |
| 4777 |
* @timeout: timeout for task management control |
| 4778 |
* @issue_reset: set to 1 on return if reset is needed, else 0 |
| 4779 |
* |
| 4780 |
* Return: 0 on success or -1 on failure. |
| 4781 |
* |
| 4782 |
*/ |
| 4783 |
static int |
| 4784 |
mptsas_issue_tm(MPT_ADAPTER *ioc, u8 type, u8 channel, u8 id, u64 lun, |
| 4785 |
int task_context, ulong timeout, u8 *issue_reset) |
| 4786 |
{ |
| 4787 |
MPT_FRAME_HDR *mf; |
| 4788 |
SCSITaskMgmt_t *pScsiTm; |
| 4789 |
int retval; |
| 4790 |
unsigned long timeleft; |
| 4791 |
|
| 4792 |
*issue_reset = 0; |
| 4793 |
mf = mpt_get_msg_frame(mptsasDeviceResetCtx, ioc); |
| 4794 |
if (mf == NULL) { |
| 4795 |
retval = -1; /* return failure */ |
| 4796 |
dtmprintk(ioc, printk(MYIOC_s_WARN_FMT "TaskMgmt request: no " |
| 4797 |
"msg frames!!\n", ioc->name)); |
| 4798 |
goto out; |
| 4799 |
} |
| 4800 |
|
| 4801 |
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt request: mr = %p, " |
| 4802 |
"task_type = 0x%02X,\n\t timeout = %ld, fw_channel = %d, " |
| 4803 |
"fw_id = %d, lun = %lld,\n\t task_context = 0x%x\n", ioc->name, mf, |
| 4804 |
type, timeout, channel, id, (unsigned long long)lun, |
| 4805 |
task_context)); |
| 4806 |
|
| 4807 |
pScsiTm = (SCSITaskMgmt_t *) mf; |
| 4808 |
memset(pScsiTm, 0, sizeof(SCSITaskMgmt_t)); |
| 4809 |
pScsiTm->Function = MPI_FUNCTION_SCSI_TASK_MGMT; |
| 4810 |
pScsiTm->TaskType = type; |
| 4811 |
pScsiTm->MsgFlags = 0; |
| 4812 |
pScsiTm->TargetID = id; |
| 4813 |
pScsiTm->Bus = channel; |
| 4814 |
pScsiTm->ChainOffset = 0; |
| 4815 |
pScsiTm->Reserved = 0; |
| 4816 |
pScsiTm->Reserved1 = 0; |
| 4817 |
pScsiTm->TaskMsgContext = task_context; |
| 4818 |
int_to_scsilun(lun, (struct scsi_lun *)pScsiTm->LUN); |
| 4819 |
|
| 4820 |
INITIALIZE_MGMT_STATUS(ioc->taskmgmt_cmds.status) |
| 4821 |
CLEAR_MGMT_STATUS(ioc->internal_cmds.status) |
| 4822 |
retval = 0; |
| 4823 |
mpt_put_msg_frame_hi_pri(mptsasDeviceResetCtx, ioc, mf); |
| 4824 |
|
| 4825 |
/* Now wait for the command to complete */ |
| 4826 |
timeleft = wait_for_completion_timeout(&ioc->taskmgmt_cmds.done, |
| 4827 |
timeout*HZ); |
| 4828 |
if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) { |
| 4829 |
retval = -1; /* return failure */ |
| 4830 |
dtmprintk(ioc, printk(MYIOC_s_ERR_FMT |
| 4831 |
"TaskMgmt request: TIMED OUT!(mr=%p)\n", ioc->name, mf)); |
| 4832 |
mpt_free_msg_frame(ioc, mf); |
| 4833 |
if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) |
| 4834 |
goto out; |
| 4835 |
*issue_reset = 1; |
| 4836 |
goto out; |
| 4837 |
} |
| 4838 |
|
| 4839 |
if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_RF_VALID)) { |
| 4840 |
retval = -1; /* return failure */ |
| 4841 |
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 4842 |
"TaskMgmt request: failed with no reply\n", ioc->name)); |
| 4843 |
goto out; |
| 4844 |
} |
| 4845 |
|
| 4846 |
out: |
| 4847 |
CLEAR_MGMT_STATUS(ioc->taskmgmt_cmds.status) |
| 4848 |
return retval; |
| 4849 |
} |
| 4850 |
|
| 4851 |
/** |
| 4852 |
* mptsas_broadcast_primitive_work - Handle broadcast primitives |
| 4853 |
* @fw_event: work queue payload containing info describing the event |
| 4854 |
* |
| 4855 |
* This will be handled in workqueue context. |
| 4856 |
*/ |
| 4857 |
static void |
| 4858 |
mptsas_broadcast_primitive_work(struct fw_event_work *fw_event) |
| 4859 |
{ |
| 4860 |
MPT_ADAPTER *ioc = fw_event->ioc; |
| 4861 |
MPT_FRAME_HDR *mf; |
| 4862 |
VirtDevice *vdevice; |
| 4863 |
int ii; |
| 4864 |
struct scsi_cmnd *sc; |
| 4865 |
SCSITaskMgmtReply_t *pScsiTmReply; |
| 4866 |
u8 issue_reset; |
| 4867 |
int task_context; |
| 4868 |
u8 channel, id; |
| 4869 |
int lun; |
| 4870 |
u32 termination_count; |
| 4871 |
u32 query_count; |
| 4872 |
|
| 4873 |
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 4874 |
"%s - enter\n", ioc->name, __func__)); |
| 4875 |
|
| 4876 |
mutex_lock(&ioc->taskmgmt_cmds.mutex); |
| 4877 |
if (mpt_set_taskmgmt_in_progress_flag(ioc) != 0) { |
| 4878 |
mutex_unlock(&ioc->taskmgmt_cmds.mutex); |
| 4879 |
mptsas_requeue_fw_event(ioc, fw_event, 1000); |
| 4880 |
return; |
| 4881 |
} |
| 4882 |
|
| 4883 |
issue_reset = 0; |
| 4884 |
termination_count = 0; |
| 4885 |
query_count = 0; |
| 4886 |
mpt_findImVolumes(ioc); |
| 4887 |
pScsiTmReply = (SCSITaskMgmtReply_t *) ioc->taskmgmt_cmds.reply; |
| 4888 |
|
| 4889 |
for (ii = 0; ii < ioc->req_depth; ii++) { |
| 4890 |
if (ioc->fw_events_off) |
| 4891 |
goto out; |
| 4892 |
sc = mptscsih_get_scsi_lookup(ioc, ii); |
| 4893 |
if (!sc) |
| 4894 |
continue; |
| 4895 |
mf = MPT_INDEX_2_MFPTR(ioc, ii); |
| 4896 |
if (!mf) |
| 4897 |
continue; |
| 4898 |
task_context = mf->u.frame.hwhdr.msgctxu.MsgContext; |
| 4899 |
vdevice = sc->device->hostdata; |
| 4900 |
if (!vdevice || !vdevice->vtarget) |
| 4901 |
continue; |
| 4902 |
if (vdevice->vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT) |
| 4903 |
continue; /* skip hidden raid components */ |
| 4904 |
if (vdevice->vtarget->raidVolume) |
| 4905 |
continue; /* skip hidden raid components */ |
| 4906 |
channel = vdevice->vtarget->channel; |
| 4907 |
id = vdevice->vtarget->id; |
| 4908 |
lun = vdevice->lun; |
| 4909 |
if (mptsas_issue_tm(ioc, MPI_SCSITASKMGMT_TASKTYPE_QUERY_TASK, |
| 4910 |
channel, id, (u64)lun, task_context, 30, &issue_reset)) |
| 4911 |
goto out; |
| 4912 |
query_count++; |
| 4913 |
termination_count += |
| 4914 |
le32_to_cpu(pScsiTmReply->TerminationCount); |
| 4915 |
if ((pScsiTmReply->IOCStatus == MPI_IOCSTATUS_SUCCESS) && |
| 4916 |
(pScsiTmReply->ResponseCode == |
| 4917 |
MPI_SCSITASKMGMT_RSP_TM_SUCCEEDED || |
| 4918 |
pScsiTmReply->ResponseCode == |
| 4919 |
MPI_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC)) |
| 4920 |
continue; |
| 4921 |
if (mptsas_issue_tm(ioc, |
| 4922 |
MPI_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET, |
| 4923 |
channel, id, (u64)lun, 0, 30, &issue_reset)) |
| 4924 |
goto out; |
| 4925 |
termination_count += |
| 4926 |
le32_to_cpu(pScsiTmReply->TerminationCount); |
| 4927 |
} |
| 4928 |
|
| 4929 |
out: |
| 4930 |
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 4931 |
"%s - exit, query_count = %d termination_count = %d\n", |
| 4932 |
ioc->name, __func__, query_count, termination_count)); |
| 4933 |
|
| 4934 |
ioc->broadcast_aen_busy = 0; |
| 4935 |
mpt_clear_taskmgmt_in_progress_flag(ioc); |
| 4936 |
mutex_unlock(&ioc->taskmgmt_cmds.mutex); |
| 4937 |
|
| 4938 |
if (issue_reset) { |
| 4939 |
printk(MYIOC_s_WARN_FMT |
| 4940 |
"Issuing Reset from %s!! doorbell=0x%08x\n", |
| 4941 |
ioc->name, __func__, mpt_GetIocState(ioc, 0)); |
| 4942 |
mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP); |
| 4943 |
} |
| 4944 |
mptsas_free_fw_event(ioc, fw_event); |
| 4945 |
} |
| 4946 |
|
| 4947 |
/* |
| 4948 |
* mptsas_send_ir2_event - handle exposing hidden disk when |
| 4949 |
* an inactive raid volume is added |
| 4950 |
* |
| 4951 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 4952 |
* @ir2_data |
| 4953 |
* |
| 4954 |
*/ |
| 4955 |
static void |
| 4956 |
mptsas_send_ir2_event(struct fw_event_work *fw_event) |
| 4957 |
{ |
| 4958 |
MPT_ADAPTER *ioc; |
| 4959 |
struct mptsas_hotplug_event hot_plug_info; |
| 4960 |
MPI_EVENT_DATA_IR2 *ir2_data; |
| 4961 |
u8 reasonCode; |
| 4962 |
RaidPhysDiskPage0_t phys_disk; |
| 4963 |
|
| 4964 |
ioc = fw_event->ioc; |
| 4965 |
ir2_data = (MPI_EVENT_DATA_IR2 *)fw_event->event_data; |
| 4966 |
reasonCode = ir2_data->ReasonCode; |
| 4967 |
|
| 4968 |
devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Entering %s: " |
| 4969 |
"ReasonCode=%02x\n", ioc->name, __func__, reasonCode)); |
| 4970 |
|
| 4971 |
memset(&hot_plug_info, 0, sizeof(struct mptsas_hotplug_event)); |
| 4972 |
hot_plug_info.id = ir2_data->TargetID; |
| 4973 |
hot_plug_info.channel = ir2_data->Bus; |
| 4974 |
switch (reasonCode) { |
| 4975 |
case MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED: |
| 4976 |
hot_plug_info.event_type = MPTSAS_ADD_INACTIVE_VOLUME; |
| 4977 |
break; |
| 4978 |
case MPI_EVENT_IR2_RC_DUAL_PORT_REMOVED: |
| 4979 |
hot_plug_info.phys_disk_num = ir2_data->PhysDiskNum; |
| 4980 |
hot_plug_info.event_type = MPTSAS_DEL_PHYSDISK; |
| 4981 |
break; |
| 4982 |
case MPI_EVENT_IR2_RC_DUAL_PORT_ADDED: |
| 4983 |
hot_plug_info.phys_disk_num = ir2_data->PhysDiskNum; |
| 4984 |
mpt_raid_phys_disk_pg0(ioc, |
| 4985 |
ir2_data->PhysDiskNum, &phys_disk); |
| 4986 |
hot_plug_info.id = phys_disk.PhysDiskID; |
| 4987 |
hot_plug_info.event_type = MPTSAS_ADD_PHYSDISK; |
| 4988 |
break; |
| 4989 |
default: |
| 4990 |
mptsas_free_fw_event(ioc, fw_event); |
| 4991 |
return; |
| 4992 |
} |
| 4993 |
mptsas_hotplug_work(ioc, fw_event, &hot_plug_info); |
| 4994 |
} |
| 4995 |
|
| 4996 |
static int |
| 4997 |
mptsas_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *reply) |
| 4998 |
{ |
| 4999 |
u32 event = le32_to_cpu(reply->Event); |
| 5000 |
int event_data_sz; |
| 5001 |
struct fw_event_work *fw_event; |
| 5002 |
unsigned long delay; |
| 5003 |
|
| 5004 |
if (ioc->bus_type != SAS) |
| 5005 |
return 0; |
| 5006 |
|
| 5007 |
/* events turned off due to host reset or driver unloading */ |
| 5008 |
if (ioc->fw_events_off) |
| 5009 |
return 0; |
| 5010 |
|
| 5011 |
delay = msecs_to_jiffies(1); |
| 5012 |
switch (event) { |
| 5013 |
case MPI_EVENT_SAS_BROADCAST_PRIMITIVE: |
| 5014 |
{ |
| 5015 |
EVENT_DATA_SAS_BROADCAST_PRIMITIVE *broadcast_event_data = |
| 5016 |
(EVENT_DATA_SAS_BROADCAST_PRIMITIVE *)reply->Data; |
| 5017 |
if (broadcast_event_data->Primitive != |
| 5018 |
MPI_EVENT_PRIMITIVE_ASYNCHRONOUS_EVENT) |
| 5019 |
return 0; |
| 5020 |
if (ioc->broadcast_aen_busy) |
| 5021 |
return 0; |
| 5022 |
ioc->broadcast_aen_busy = 1; |
| 5023 |
break; |
| 5024 |
} |
| 5025 |
case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE: |
| 5026 |
{ |
| 5027 |
EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *sas_event_data = |
| 5028 |
(EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *)reply->Data; |
| 5029 |
u16 ioc_stat; |
| 5030 |
ioc_stat = le16_to_cpu(reply->IOCStatus); |
| 5031 |
|
| 5032 |
if (sas_event_data->ReasonCode == |
| 5033 |
MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING) { |
| 5034 |
mptsas_target_reset_queue(ioc, sas_event_data); |
| 5035 |
return 0; |
| 5036 |
} |
| 5037 |
if (sas_event_data->ReasonCode == |
| 5038 |
MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET && |
| 5039 |
ioc->device_missing_delay && |
| 5040 |
(ioc_stat & MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE)) { |
| 5041 |
VirtTarget *vtarget = NULL; |
| 5042 |
u8 id, channel; |
| 5043 |
|
| 5044 |
id = sas_event_data->TargetID; |
| 5045 |
channel = sas_event_data->Bus; |
| 5046 |
|
| 5047 |
vtarget = mptsas_find_vtarget(ioc, channel, id); |
| 5048 |
if (vtarget) { |
| 5049 |
devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 5050 |
"LogInfo (0x%x) available for " |
| 5051 |
"INTERNAL_DEVICE_RESET" |
| 5052 |
"fw_id %d fw_channel %d\n", ioc->name, |
| 5053 |
le32_to_cpu(reply->IOCLogInfo), |
| 5054 |
id, channel)); |
| 5055 |
if (vtarget->raidVolume) { |
| 5056 |
devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 5057 |
"Skipping Raid Volume for inDMD\n", |
| 5058 |
ioc->name)); |
| 5059 |
} else { |
| 5060 |
devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 5061 |
"Setting device flag inDMD\n", |
| 5062 |
ioc->name)); |
| 5063 |
vtarget->inDMD = 1; |
| 5064 |
} |
| 5065 |
|
| 5066 |
} |
| 5067 |
|
| 5068 |
} |
| 5069 |
|
| 5070 |
break; |
| 5071 |
} |
| 5072 |
case MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE: |
| 5073 |
{ |
| 5074 |
MpiEventDataSasExpanderStatusChange_t *expander_data = |
| 5075 |
(MpiEventDataSasExpanderStatusChange_t *)reply->Data; |
| 5076 |
|
| 5077 |
if (ioc->old_sas_discovery_protocal) |
| 5078 |
return 0; |
| 5079 |
|
| 5080 |
if (expander_data->ReasonCode == |
| 5081 |
MPI_EVENT_SAS_EXP_RC_NOT_RESPONDING && |
| 5082 |
ioc->device_missing_delay) |
| 5083 |
delay = HZ * ioc->device_missing_delay; |
| 5084 |
break; |
| 5085 |
} |
| 5086 |
case MPI_EVENT_SAS_DISCOVERY: |
| 5087 |
{ |
| 5088 |
u32 discovery_status; |
| 5089 |
EventDataSasDiscovery_t *discovery_data = |
| 5090 |
(EventDataSasDiscovery_t *)reply->Data; |
| 5091 |
|
| 5092 |
discovery_status = le32_to_cpu(discovery_data->DiscoveryStatus); |
| 5093 |
ioc->sas_discovery_quiesce_io = discovery_status ? 1 : 0; |
| 5094 |
if (ioc->old_sas_discovery_protocal && !discovery_status) |
| 5095 |
mptsas_queue_rescan(ioc); |
| 5096 |
return 0; |
| 5097 |
} |
| 5098 |
case MPI_EVENT_INTEGRATED_RAID: |
| 5099 |
case MPI_EVENT_PERSISTENT_TABLE_FULL: |
| 5100 |
case MPI_EVENT_IR2: |
| 5101 |
case MPI_EVENT_SAS_PHY_LINK_STATUS: |
| 5102 |
case MPI_EVENT_QUEUE_FULL: |
| 5103 |
break; |
| 5104 |
default: |
| 5105 |
return 0; |
| 5106 |
} |
| 5107 |
|
| 5108 |
event_data_sz = ((reply->MsgLength * 4) - |
| 5109 |
offsetof(EventNotificationReply_t, Data)); |
| 5110 |
fw_event = kzalloc(sizeof(*fw_event) + event_data_sz, GFP_ATOMIC); |
| 5111 |
if (!fw_event) { |
| 5112 |
printk(MYIOC_s_WARN_FMT "%s: failed at (line=%d)\n", ioc->name, |
| 5113 |
__func__, __LINE__); |
| 5114 |
return 0; |
| 5115 |
} |
| 5116 |
memcpy(fw_event->event_data, reply->Data, event_data_sz); |
| 5117 |
fw_event->event = event; |
| 5118 |
fw_event->ioc = ioc; |
| 5119 |
mptsas_add_fw_event(ioc, fw_event, delay); |
| 5120 |
return 0; |
| 5121 |
} |
| 5122 |
|
| 5123 |
/* Delete a volume when no longer listed in ioc pg2 |
| 5124 |
*/ |
| 5125 |
static void mptsas_volume_delete(MPT_ADAPTER *ioc, u8 id) |
| 5126 |
{ |
| 5127 |
struct scsi_device *sdev; |
| 5128 |
int i; |
| 5129 |
|
| 5130 |
sdev = scsi_device_lookup(ioc->sh, MPTSAS_RAID_CHANNEL, id, 0); |
| 5131 |
if (!sdev) |
| 5132 |
return; |
| 5133 |
if (!ioc->raid_data.pIocPg2) |
| 5134 |
goto out; |
| 5135 |
if (!ioc->raid_data.pIocPg2->NumActiveVolumes) |
| 5136 |
goto out; |
| 5137 |
for (i = 0; i < ioc->raid_data.pIocPg2->NumActiveVolumes; i++) |
| 5138 |
if (ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID == id) |
| 5139 |
goto release_sdev; |
| 5140 |
out: |
| 5141 |
printk(MYIOC_s_INFO_FMT "removing raid volume, channel %d, " |
| 5142 |
"id %d\n", ioc->name, MPTSAS_RAID_CHANNEL, id); |
| 5143 |
scsi_remove_device(sdev); |
| 5144 |
release_sdev: |
| 5145 |
scsi_device_put(sdev); |
| 5146 |
} |
| 5147 |
|
| 5148 |
static int |
| 5149 |
mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id) |
| 5150 |
{ |
| 5151 |
struct Scsi_Host *sh; |
| 5152 |
MPT_SCSI_HOST *hd; |
| 5153 |
MPT_ADAPTER *ioc; |
| 5154 |
unsigned long flags; |
| 5155 |
int ii; |
| 5156 |
int numSGE = 0; |
| 5157 |
int scale; |
| 5158 |
int ioc_cap; |
| 5159 |
int error=0; |
| 5160 |
int r; |
| 5161 |
|
| 5162 |
r = mpt_attach(pdev,id); |
| 5163 |
if (r) |
| 5164 |
return r; |
| 5165 |
|
| 5166 |
ioc = pci_get_drvdata(pdev); |
| 5167 |
mptsas_fw_event_off(ioc); |
| 5168 |
ioc->DoneCtx = mptsasDoneCtx; |
| 5169 |
ioc->TaskCtx = mptsasTaskCtx; |
| 5170 |
ioc->InternalCtx = mptsasInternalCtx; |
| 5171 |
ioc->schedule_target_reset = &mptsas_schedule_target_reset; |
| 5172 |
ioc->schedule_dead_ioc_flush_running_cmds = |
| 5173 |
&mptscsih_flush_running_cmds; |
| 5174 |
/* Added sanity check on readiness of the MPT adapter. |
| 5175 |
*/ |
| 5176 |
if (ioc->last_state != MPI_IOC_STATE_OPERATIONAL) { |
| 5177 |
printk(MYIOC_s_WARN_FMT |
| 5178 |
"Skipping because it's not operational!\n", |
| 5179 |
ioc->name); |
| 5180 |
error = -ENODEV; |
| 5181 |
goto out_mptsas_probe; |
| 5182 |
} |
| 5183 |
|
| 5184 |
if (!ioc->active) { |
| 5185 |
printk(MYIOC_s_WARN_FMT "Skipping because it's disabled!\n", |
| 5186 |
ioc->name); |
| 5187 |
error = -ENODEV; |
| 5188 |
goto out_mptsas_probe; |
| 5189 |
} |
| 5190 |
|
| 5191 |
/* Sanity check - ensure at least 1 port is INITIATOR capable |
| 5192 |
*/ |
| 5193 |
ioc_cap = 0; |
| 5194 |
for (ii = 0; ii < ioc->facts.NumberOfPorts; ii++) { |
| 5195 |
if (ioc->pfacts[ii].ProtocolFlags & |
| 5196 |
MPI_PORTFACTS_PROTOCOL_INITIATOR) |
| 5197 |
ioc_cap++; |
| 5198 |
} |
| 5199 |
|
| 5200 |
if (!ioc_cap) { |
| 5201 |
printk(MYIOC_s_WARN_FMT |
| 5202 |
"Skipping ioc=%p because SCSI Initiator mode " |
| 5203 |
"is NOT enabled!\n", ioc->name, ioc); |
| 5204 |
return 0; |
| 5205 |
} |
| 5206 |
|
| 5207 |
sh = scsi_host_alloc(&mptsas_driver_template, sizeof(MPT_SCSI_HOST)); |
| 5208 |
if (!sh) { |
| 5209 |
printk(MYIOC_s_WARN_FMT |
| 5210 |
"Unable to register controller with SCSI subsystem\n", |
| 5211 |
ioc->name); |
| 5212 |
error = -1; |
| 5213 |
goto out_mptsas_probe; |
| 5214 |
} |
| 5215 |
|
| 5216 |
spin_lock_irqsave(&ioc->FreeQlock, flags); |
| 5217 |
|
| 5218 |
/* Attach the SCSI Host to the IOC structure |
| 5219 |
*/ |
| 5220 |
ioc->sh = sh; |
| 5221 |
|
| 5222 |
sh->io_port = 0; |
| 5223 |
sh->n_io_port = 0; |
| 5224 |
sh->irq = 0; |
| 5225 |
|
| 5226 |
/* set 16 byte cdb's */ |
| 5227 |
sh->max_cmd_len = 16; |
| 5228 |
sh->can_queue = min_t(int, ioc->req_depth - 10, sh->can_queue); |
| 5229 |
sh->max_id = -1; |
| 5230 |
sh->max_lun = max_lun; |
| 5231 |
sh->transportt = mptsas_transport_template; |
| 5232 |
|
| 5233 |
/* Required entry. |
| 5234 |
*/ |
| 5235 |
sh->unique_id = ioc->id; |
| 5236 |
|
| 5237 |
INIT_LIST_HEAD(&ioc->sas_topology); |
| 5238 |
mutex_init(&ioc->sas_topology_mutex); |
| 5239 |
mutex_init(&ioc->sas_discovery_mutex); |
| 5240 |
mutex_init(&ioc->sas_mgmt.mutex); |
| 5241 |
init_completion(&ioc->sas_mgmt.done); |
| 5242 |
|
| 5243 |
/* Verify that we won't exceed the maximum |
| 5244 |
* number of chain buffers |
| 5245 |
* We can optimize: ZZ = req_sz/sizeof(SGE) |
| 5246 |
* For 32bit SGE's: |
| 5247 |
* numSGE = 1 + (ZZ-1)*(maxChain -1) + ZZ |
| 5248 |
* + (req_sz - 64)/sizeof(SGE) |
| 5249 |
* A slightly different algorithm is required for |
| 5250 |
* 64bit SGEs. |
| 5251 |
*/ |
| 5252 |
scale = ioc->req_sz/ioc->SGE_size; |
| 5253 |
if (ioc->sg_addr_size == sizeof(u64)) { |
| 5254 |
numSGE = (scale - 1) * |
| 5255 |
(ioc->facts.MaxChainDepth-1) + scale + |
| 5256 |
(ioc->req_sz - 60) / ioc->SGE_size; |
| 5257 |
} else { |
| 5258 |
numSGE = 1 + (scale - 1) * |
| 5259 |
(ioc->facts.MaxChainDepth-1) + scale + |
| 5260 |
(ioc->req_sz - 64) / ioc->SGE_size; |
| 5261 |
} |
| 5262 |
|
| 5263 |
if (numSGE < sh->sg_tablesize) { |
| 5264 |
/* Reset this value */ |
| 5265 |
dprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 5266 |
"Resetting sg_tablesize to %d from %d\n", |
| 5267 |
ioc->name, numSGE, sh->sg_tablesize)); |
| 5268 |
sh->sg_tablesize = numSGE; |
| 5269 |
} |
| 5270 |
|
| 5271 |
if (mpt_loadtime_max_sectors) { |
| 5272 |
if (mpt_loadtime_max_sectors < 64 || |
| 5273 |
mpt_loadtime_max_sectors > 8192) { |
| 5274 |
printk(MYIOC_s_INFO_FMT "Invalid value passed for" |
| 5275 |
"mpt_loadtime_max_sectors %d." |
| 5276 |
"Range from 64 to 8192\n", ioc->name, |
| 5277 |
mpt_loadtime_max_sectors); |
| 5278 |
} |
| 5279 |
mpt_loadtime_max_sectors &= 0xFFFFFFFE; |
| 5280 |
dprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 5281 |
"Resetting max sector to %d from %d\n", |
| 5282 |
ioc->name, mpt_loadtime_max_sectors, sh->max_sectors)); |
| 5283 |
sh->max_sectors = mpt_loadtime_max_sectors; |
| 5284 |
} |
| 5285 |
|
| 5286 |
hd = shost_priv(sh); |
| 5287 |
hd->ioc = ioc; |
| 5288 |
|
| 5289 |
/* SCSI needs scsi_cmnd lookup table! |
| 5290 |
* (with size equal to req_depth*PtrSz!) |
| 5291 |
*/ |
| 5292 |
ioc->ScsiLookup = kcalloc(ioc->req_depth, sizeof(void *), GFP_ATOMIC); |
| 5293 |
if (!ioc->ScsiLookup) { |
| 5294 |
error = -ENOMEM; |
| 5295 |
spin_unlock_irqrestore(&ioc->FreeQlock, flags); |
| 5296 |
goto out_mptsas_probe; |
| 5297 |
} |
| 5298 |
spin_lock_init(&ioc->scsi_lookup_lock); |
| 5299 |
|
| 5300 |
dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ScsiLookup @ %p\n", |
| 5301 |
ioc->name, ioc->ScsiLookup)); |
| 5302 |
|
| 5303 |
ioc->sas_data.ptClear = mpt_pt_clear; |
| 5304 |
|
| 5305 |
hd->last_queue_full = 0; |
| 5306 |
INIT_LIST_HEAD(&hd->target_reset_list); |
| 5307 |
INIT_LIST_HEAD(&ioc->sas_device_info_list); |
| 5308 |
mutex_init(&ioc->sas_device_info_mutex); |
| 5309 |
|
| 5310 |
spin_unlock_irqrestore(&ioc->FreeQlock, flags); |
| 5311 |
|
| 5312 |
if (ioc->sas_data.ptClear==1) { |
| 5313 |
mptbase_sas_persist_operation( |
| 5314 |
ioc, MPI_SAS_OP_CLEAR_ALL_PERSISTENT); |
| 5315 |
} |
| 5316 |
|
| 5317 |
error = scsi_add_host(sh, &ioc->pcidev->dev); |
| 5318 |
if (error) { |
| 5319 |
dprintk(ioc, printk(MYIOC_s_ERR_FMT |
| 5320 |
"scsi_add_host failed\n", ioc->name)); |
| 5321 |
goto out_mptsas_probe; |
| 5322 |
} |
| 5323 |
|
| 5324 |
/* older firmware doesn't support expander events */ |
| 5325 |
if ((ioc->facts.HeaderVersion >> 8) < 0xE) |
| 5326 |
ioc->old_sas_discovery_protocal = 1; |
| 5327 |
mptsas_scan_sas_topology(ioc); |
| 5328 |
mptsas_fw_event_on(ioc); |
| 5329 |
return 0; |
| 5330 |
|
| 5331 |
out_mptsas_probe: |
| 5332 |
|
| 5333 |
mptscsih_remove(pdev); |
| 5334 |
return error; |
| 5335 |
} |
| 5336 |
|
| 5337 |
static void |
| 5338 |
mptsas_shutdown(struct pci_dev *pdev) |
| 5339 |
{ |
| 5340 |
MPT_ADAPTER *ioc = pci_get_drvdata(pdev); |
| 5341 |
|
| 5342 |
mptsas_fw_event_off(ioc); |
| 5343 |
mptsas_cleanup_fw_event_q(ioc); |
| 5344 |
} |
| 5345 |
|
| 5346 |
static void mptsas_remove(struct pci_dev *pdev) |
| 5347 |
{ |
| 5348 |
MPT_ADAPTER *ioc = pci_get_drvdata(pdev); |
| 5349 |
struct mptsas_portinfo *p, *n; |
| 5350 |
int i; |
| 5351 |
|
| 5352 |
if (!ioc->sh) { |
| 5353 |
printk(MYIOC_s_INFO_FMT "IOC is in Target mode\n", ioc->name); |
| 5354 |
mpt_detach(pdev); |
| 5355 |
return; |
| 5356 |
} |
| 5357 |
|
| 5358 |
mptsas_shutdown(pdev); |
| 5359 |
|
| 5360 |
mptsas_del_device_components(ioc); |
| 5361 |
|
| 5362 |
ioc->sas_discovery_ignore_events = 1; |
| 5363 |
sas_remove_host(ioc->sh); |
| 5364 |
|
| 5365 |
mutex_lock(&ioc->sas_topology_mutex); |
| 5366 |
list_for_each_entry_safe(p, n, &ioc->sas_topology, list) { |
| 5367 |
list_del(&p->list); |
| 5368 |
for (i = 0 ; i < p->num_phys ; i++) |
| 5369 |
mptsas_port_delete(ioc, p->phy_info[i].port_details); |
| 5370 |
|
| 5371 |
kfree(p->phy_info); |
| 5372 |
kfree(p); |
| 5373 |
} |
| 5374 |
mutex_unlock(&ioc->sas_topology_mutex); |
| 5375 |
ioc->hba_port_info = NULL; |
| 5376 |
mptscsih_remove(pdev); |
| 5377 |
} |
| 5378 |
|
| 5379 |
static const struct pci_device_id mptsas_pci_table[] = { |
| 5380 |
{ PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_SAS1064, |
| 5381 |
PCI_ANY_ID, PCI_ANY_ID }, |
| 5382 |
{ PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_SAS1068, |
| 5383 |
PCI_ANY_ID, PCI_ANY_ID }, |
| 5384 |
{ PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_SAS1064E, |
| 5385 |
PCI_ANY_ID, PCI_ANY_ID }, |
| 5386 |
{ PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_SAS1068E, |
| 5387 |
PCI_ANY_ID, PCI_ANY_ID }, |
| 5388 |
{ PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_SAS1078, |
| 5389 |
PCI_ANY_ID, PCI_ANY_ID }, |
| 5390 |
{ PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_SAS1068_820XELP, |
| 5391 |
PCI_ANY_ID, PCI_ANY_ID }, |
| 5392 |
{0} /* Terminating entry */ |
| 5393 |
}; |
| 5394 |
MODULE_DEVICE_TABLE(pci, mptsas_pci_table); |
| 5395 |
|
| 5396 |
|
| 5397 |
static struct pci_driver mptsas_driver = { |
| 5398 |
.name = "mptsas", |
| 5399 |
.id_table = mptsas_pci_table, |
| 5400 |
.probe = mptsas_probe, |
| 5401 |
.remove = mptsas_remove, |
| 5402 |
.shutdown = mptsas_shutdown, |
| 5403 |
#ifdef CONFIG_PM |
| 5404 |
.suspend = mptscsih_suspend, |
| 5405 |
.resume = mptscsih_resume, |
| 5406 |
#endif |
| 5407 |
}; |
| 5408 |
|
| 5409 |
static int __init |
| 5410 |
mptsas_init(void) |
| 5411 |
{ |
| 5412 |
int error; |
| 5413 |
|
| 5414 |
show_mptmod_ver(my_NAME, my_VERSION); |
| 5415 |
|
| 5416 |
mptsas_transport_template = |
| 5417 |
sas_attach_transport(&mptsas_transport_functions); |
| 5418 |
if (!mptsas_transport_template) |
| 5419 |
return -ENODEV; |
| 5420 |
|
| 5421 |
mptsasDoneCtx = mpt_register(mptscsih_io_done, MPTSAS_DRIVER, |
| 5422 |
"mptscsih_io_done"); |
| 5423 |
mptsasTaskCtx = mpt_register(mptscsih_taskmgmt_complete, MPTSAS_DRIVER, |
| 5424 |
"mptscsih_taskmgmt_complete"); |
| 5425 |
mptsasInternalCtx = |
| 5426 |
mpt_register(mptscsih_scandv_complete, MPTSAS_DRIVER, |
| 5427 |
"mptscsih_scandv_complete"); |
| 5428 |
mptsasMgmtCtx = mpt_register(mptsas_mgmt_done, MPTSAS_DRIVER, |
| 5429 |
"mptsas_mgmt_done"); |
| 5430 |
mptsasDeviceResetCtx = |
| 5431 |
mpt_register(mptsas_taskmgmt_complete, MPTSAS_DRIVER, |
| 5432 |
"mptsas_taskmgmt_complete"); |
| 5433 |
|
| 5434 |
mpt_event_register(mptsasDoneCtx, mptsas_event_process); |
| 5435 |
mpt_reset_register(mptsasDoneCtx, mptsas_ioc_reset); |
| 5436 |
|
| 5437 |
error = pci_register_driver(&mptsas_driver); |
| 5438 |
if (error) |
| 5439 |
sas_release_transport(mptsas_transport_template); |
| 5440 |
|
| 5441 |
return error; |
| 5442 |
} |
| 5443 |
|
| 5444 |
static void __exit |
| 5445 |
mptsas_exit(void) |
| 5446 |
{ |
| 5447 |
pci_unregister_driver(&mptsas_driver); |
| 5448 |
sas_release_transport(mptsas_transport_template); |
| 5449 |
|
| 5450 |
mpt_reset_deregister(mptsasDoneCtx); |
| 5451 |
mpt_event_deregister(mptsasDoneCtx); |
| 5452 |
|
| 5453 |
mpt_deregister(mptsasMgmtCtx); |
| 5454 |
mpt_deregister(mptsasInternalCtx); |
| 5455 |
mpt_deregister(mptsasTaskCtx); |
| 5456 |
mpt_deregister(mptsasDoneCtx); |
| 5457 |
mpt_deregister(mptsasDeviceResetCtx); |
| 5458 |
} |
| 5459 |
|
| 5460 |
module_init(mptsas_init); |
| 5461 |
module_exit(mptsas_exit); |