| 1 |
/* |
| 2 |
* linux/drivers/message/fusion/mptioctl.h |
| 3 |
* Fusion MPT misc device (ioctl) driver. |
| 4 |
* For use with PCI chip/adapter(s): |
| 5 |
* LSIFC9xx/LSI409xx Fibre Channel |
| 6 |
* running LSI Fusion MPT (Message Passing Technology) firmware. |
| 7 |
* |
| 8 |
* Copyright (c) 1999-2008 LSI Corporation |
| 9 |
* (mailto:[email protected]) |
| 10 |
* |
| 11 |
*/ |
| 12 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 13 |
/* |
| 14 |
This program is free software; you can redistribute it and/or modify |
| 15 |
it under the terms of the GNU General Public License as published by |
| 16 |
the Free Software Foundation; version 2 of the License. |
| 17 |
|
| 18 |
This program is distributed in the hope that it will be useful, |
| 19 |
but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 20 |
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 21 |
GNU General Public License for more details. |
| 22 |
|
| 23 |
NO WARRANTY |
| 24 |
THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR |
| 25 |
CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT |
| 26 |
LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, |
| 27 |
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is |
| 28 |
solely responsible for determining the appropriateness of using and |
| 29 |
distributing the Program and assumes all risks associated with its |
| 30 |
exercise of rights under this Agreement, including but not limited to |
| 31 |
the risks and costs of program errors, damage to or loss of data, |
| 32 |
programs or equipment, and unavailability or interruption of operations. |
| 33 |
|
| 34 |
DISCLAIMER OF LIABILITY |
| 35 |
NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY |
| 36 |
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| 37 |
DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND |
| 38 |
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR |
| 39 |
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE |
| 40 |
USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED |
| 41 |
HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES |
| 42 |
|
| 43 |
You should have received a copy of the GNU General Public License |
| 44 |
along with this program; if not, write to the Free Software |
| 45 |
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| 46 |
*/ |
| 47 |
|
| 48 |
#ifndef MPTCTL_H_INCLUDED |
| 49 |
#define MPTCTL_H_INCLUDED |
| 50 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 51 |
|
| 52 |
|
| 53 |
|
| 54 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 55 |
/* |
| 56 |
* |
| 57 |
*/ |
| 58 |
#define MPT_MISCDEV_BASENAME "mptctl" |
| 59 |
#define MPT_MISCDEV_PATHNAME "/dev/" MPT_MISCDEV_BASENAME |
| 60 |
|
| 61 |
#define MPT_PRODUCT_LENGTH 12 |
| 62 |
|
| 63 |
/* |
| 64 |
* Generic MPT Control IOCTLs and structures |
| 65 |
*/ |
| 66 |
#define MPT_MAGIC_NUMBER 'm' |
| 67 |
|
| 68 |
#define MPTRWPERF _IOWR(MPT_MAGIC_NUMBER,0,struct mpt_raw_r_w) |
| 69 |
|
| 70 |
#define MPTFWDOWNLOAD _IOWR(MPT_MAGIC_NUMBER,15,struct mpt_fw_xfer) |
| 71 |
#define MPTCOMMAND _IOWR(MPT_MAGIC_NUMBER,20,struct mpt_ioctl_command) |
| 72 |
|
| 73 |
#if defined(__KERNEL__) && defined(CONFIG_COMPAT) |
| 74 |
#define MPTFWDOWNLOAD32 _IOWR(MPT_MAGIC_NUMBER,15,struct mpt_fw_xfer32) |
| 75 |
#define MPTCOMMAND32 _IOWR(MPT_MAGIC_NUMBER,20,struct mpt_ioctl_command32) |
| 76 |
#endif |
| 77 |
|
| 78 |
#define MPTIOCINFO _IOWR(MPT_MAGIC_NUMBER,17,struct mpt_ioctl_iocinfo) |
| 79 |
#define MPTIOCINFO1 _IOWR(MPT_MAGIC_NUMBER,17,struct mpt_ioctl_iocinfo_rev0) |
| 80 |
#define MPTIOCINFO2 _IOWR(MPT_MAGIC_NUMBER,17,struct mpt_ioctl_iocinfo_rev1) |
| 81 |
#define MPTTARGETINFO _IOWR(MPT_MAGIC_NUMBER,18,struct mpt_ioctl_targetinfo) |
| 82 |
#define MPTTEST _IOWR(MPT_MAGIC_NUMBER,19,struct mpt_ioctl_test) |
| 83 |
#define MPTEVENTQUERY _IOWR(MPT_MAGIC_NUMBER,21,struct mpt_ioctl_eventquery) |
| 84 |
#define MPTEVENTENABLE _IOWR(MPT_MAGIC_NUMBER,22,struct mpt_ioctl_eventenable) |
| 85 |
#define MPTEVENTREPORT _IOWR(MPT_MAGIC_NUMBER,23,struct mpt_ioctl_eventreport) |
| 86 |
#define MPTHARDRESET _IOWR(MPT_MAGIC_NUMBER,24,struct mpt_ioctl_diag_reset) |
| 87 |
#define MPTFWREPLACE _IOWR(MPT_MAGIC_NUMBER,25,struct mpt_ioctl_replace_fw) |
| 88 |
|
| 89 |
/* |
| 90 |
* SPARC PLATFORM REMARKS: |
| 91 |
* IOCTL data structures that contain pointers |
| 92 |
* will have different sizes in the driver and applications |
| 93 |
* (as the app. will not use 8-byte pointers). |
| 94 |
* Apps should use MPTFWDOWNLOAD and MPTCOMMAND. |
| 95 |
* The driver will convert data from |
| 96 |
* mpt_fw_xfer32 (mpt_ioctl_command32) to mpt_fw_xfer (mpt_ioctl_command) |
| 97 |
* internally. |
| 98 |
* |
| 99 |
* If data structures change size, must handle as in IOCGETINFO. |
| 100 |
*/ |
| 101 |
struct mpt_fw_xfer { |
| 102 |
unsigned int iocnum; /* IOC unit number */ |
| 103 |
unsigned int fwlen; |
| 104 |
void __user *bufp; /* Pointer to firmware buffer */ |
| 105 |
}; |
| 106 |
|
| 107 |
#if defined(__KERNEL__) && defined(CONFIG_COMPAT) |
| 108 |
struct mpt_fw_xfer32 { |
| 109 |
unsigned int iocnum; |
| 110 |
unsigned int fwlen; |
| 111 |
u32 bufp; |
| 112 |
}; |
| 113 |
#endif /*}*/ |
| 114 |
|
| 115 |
/* |
| 116 |
* IOCTL header structure. |
| 117 |
* iocnum - must be defined. |
| 118 |
* port - must be defined for all IOCTL commands other than MPTIOCINFO |
| 119 |
* maxDataSize - ignored on MPTCOMMAND commands |
| 120 |
* - ignored on MPTFWREPLACE commands |
| 121 |
* - on query commands, reports the maximum number of bytes to be returned |
| 122 |
* to the host driver (count includes the header). |
| 123 |
* That is, set to sizeof(struct mpt_ioctl_iocinfo) for fixed sized commands. |
| 124 |
* Set to sizeof(struct mpt_ioctl_targetinfo) + datasize for variable |
| 125 |
* sized commands. (MPTTARGETINFO, MPTEVENTREPORT) |
| 126 |
*/ |
| 127 |
typedef struct _mpt_ioctl_header { |
| 128 |
unsigned int iocnum; /* IOC unit number */ |
| 129 |
unsigned int port; /* IOC port number */ |
| 130 |
int maxDataSize; /* Maximum Num. bytes to transfer on read */ |
| 131 |
} mpt_ioctl_header; |
| 132 |
|
| 133 |
/* |
| 134 |
* Issue a diagnostic reset |
| 135 |
*/ |
| 136 |
struct mpt_ioctl_diag_reset { |
| 137 |
mpt_ioctl_header hdr; |
| 138 |
}; |
| 139 |
|
| 140 |
|
| 141 |
/* |
| 142 |
* PCI bus/device/function information structure. |
| 143 |
*/ |
| 144 |
struct mpt_ioctl_pci_info { |
| 145 |
union { |
| 146 |
struct { |
| 147 |
unsigned int deviceNumber : 5; |
| 148 |
unsigned int functionNumber : 3; |
| 149 |
unsigned int busNumber : 24; |
| 150 |
} bits; |
| 151 |
unsigned int asUlong; |
| 152 |
} u; |
| 153 |
}; |
| 154 |
|
| 155 |
struct mpt_ioctl_pci_info2 { |
| 156 |
union { |
| 157 |
struct { |
| 158 |
unsigned int deviceNumber : 5; |
| 159 |
unsigned int functionNumber : 3; |
| 160 |
unsigned int busNumber : 24; |
| 161 |
} bits; |
| 162 |
unsigned int asUlong; |
| 163 |
} u; |
| 164 |
int segmentID; |
| 165 |
}; |
| 166 |
|
| 167 |
/* |
| 168 |
* Adapter Information Page |
| 169 |
* Read only. |
| 170 |
* Data starts at offset 0xC |
| 171 |
*/ |
| 172 |
#define MPT_IOCTL_INTERFACE_SCSI (0x00) |
| 173 |
#define MPT_IOCTL_INTERFACE_FC (0x01) |
| 174 |
#define MPT_IOCTL_INTERFACE_FC_IP (0x02) |
| 175 |
#define MPT_IOCTL_INTERFACE_SAS (0x03) |
| 176 |
#define MPT_IOCTL_VERSION_LENGTH (32) |
| 177 |
|
| 178 |
struct mpt_ioctl_iocinfo { |
| 179 |
mpt_ioctl_header hdr; |
| 180 |
int adapterType; /* SCSI or FCP */ |
| 181 |
int port; /* port number */ |
| 182 |
int pciId; /* PCI Id. */ |
| 183 |
int hwRev; /* hardware revision */ |
| 184 |
int subSystemDevice; /* PCI subsystem Device ID */ |
| 185 |
int subSystemVendor; /* PCI subsystem Vendor ID */ |
| 186 |
int numDevices; /* number of devices */ |
| 187 |
int FWVersion; /* FW Version (integer) */ |
| 188 |
int BIOSVersion; /* BIOS Version (integer) */ |
| 189 |
char driverVersion[MPT_IOCTL_VERSION_LENGTH]; /* Driver Version (string) */ |
| 190 |
char busChangeEvent; |
| 191 |
char hostId; |
| 192 |
char rsvd[2]; |
| 193 |
struct mpt_ioctl_pci_info2 pciInfo; /* Added Rev 2 */ |
| 194 |
}; |
| 195 |
|
| 196 |
struct mpt_ioctl_iocinfo_rev1 { |
| 197 |
mpt_ioctl_header hdr; |
| 198 |
int adapterType; /* SCSI or FCP */ |
| 199 |
int port; /* port number */ |
| 200 |
int pciId; /* PCI Id. */ |
| 201 |
int hwRev; /* hardware revision */ |
| 202 |
int subSystemDevice; /* PCI subsystem Device ID */ |
| 203 |
int subSystemVendor; /* PCI subsystem Vendor ID */ |
| 204 |
int numDevices; /* number of devices */ |
| 205 |
int FWVersion; /* FW Version (integer) */ |
| 206 |
int BIOSVersion; /* BIOS Version (integer) */ |
| 207 |
char driverVersion[MPT_IOCTL_VERSION_LENGTH]; /* Driver Version (string) */ |
| 208 |
char busChangeEvent; |
| 209 |
char hostId; |
| 210 |
char rsvd[2]; |
| 211 |
struct mpt_ioctl_pci_info pciInfo; /* Added Rev 1 */ |
| 212 |
}; |
| 213 |
|
| 214 |
/* Original structure, must always accept these |
| 215 |
* IOCTLs. 4 byte pads can occur based on arch with |
| 216 |
* above structure. Wish to re-align, but cannot. |
| 217 |
*/ |
| 218 |
struct mpt_ioctl_iocinfo_rev0 { |
| 219 |
mpt_ioctl_header hdr; |
| 220 |
int adapterType; /* SCSI or FCP */ |
| 221 |
int port; /* port number */ |
| 222 |
int pciId; /* PCI Id. */ |
| 223 |
int hwRev; /* hardware revision */ |
| 224 |
int subSystemDevice; /* PCI subsystem Device ID */ |
| 225 |
int subSystemVendor; /* PCI subsystem Vendor ID */ |
| 226 |
int numDevices; /* number of devices */ |
| 227 |
int FWVersion; /* FW Version (integer) */ |
| 228 |
int BIOSVersion; /* BIOS Version (integer) */ |
| 229 |
char driverVersion[MPT_IOCTL_VERSION_LENGTH]; /* Driver Version (string) */ |
| 230 |
char busChangeEvent; |
| 231 |
char hostId; |
| 232 |
char rsvd[2]; |
| 233 |
}; |
| 234 |
|
| 235 |
/* |
| 236 |
* Device Information Page |
| 237 |
* Report the number of, and ids of, all targets |
| 238 |
* on this IOC. The ids array is a packed structure |
| 239 |
* of the known targetInfo. |
| 240 |
* bits 31-24: reserved |
| 241 |
* 23-16: LUN |
| 242 |
* 15- 8: Bus Number |
| 243 |
* 7- 0: Target ID |
| 244 |
*/ |
| 245 |
struct mpt_ioctl_targetinfo { |
| 246 |
mpt_ioctl_header hdr; |
| 247 |
int numDevices; /* Num targets on this ioc */ |
| 248 |
int targetInfo[1]; |
| 249 |
}; |
| 250 |
|
| 251 |
|
| 252 |
/* |
| 253 |
* Event reporting IOCTL's. These IOCTL's will |
| 254 |
* use the following defines: |
| 255 |
*/ |
| 256 |
struct mpt_ioctl_eventquery { |
| 257 |
mpt_ioctl_header hdr; |
| 258 |
unsigned short eventEntries; |
| 259 |
unsigned short reserved; |
| 260 |
unsigned int eventTypes; |
| 261 |
}; |
| 262 |
|
| 263 |
struct mpt_ioctl_eventenable { |
| 264 |
mpt_ioctl_header hdr; |
| 265 |
unsigned int eventTypes; |
| 266 |
}; |
| 267 |
|
| 268 |
#ifndef __KERNEL__ |
| 269 |
typedef struct { |
| 270 |
uint event; |
| 271 |
uint eventContext; |
| 272 |
uint data[2]; |
| 273 |
} MPT_IOCTL_EVENTS; |
| 274 |
#endif |
| 275 |
|
| 276 |
struct mpt_ioctl_eventreport { |
| 277 |
mpt_ioctl_header hdr; |
| 278 |
MPT_IOCTL_EVENTS eventData[1]; |
| 279 |
}; |
| 280 |
|
| 281 |
#define MPT_MAX_NAME 32 |
| 282 |
struct mpt_ioctl_test { |
| 283 |
mpt_ioctl_header hdr; |
| 284 |
u8 name[MPT_MAX_NAME]; |
| 285 |
int chip_type; |
| 286 |
u8 product [MPT_PRODUCT_LENGTH]; |
| 287 |
}; |
| 288 |
|
| 289 |
/* Replace the FW image cached in host driver memory |
| 290 |
* newImageSize - image size in bytes |
| 291 |
* newImage - first byte of the new image |
| 292 |
*/ |
| 293 |
typedef struct mpt_ioctl_replace_fw { |
| 294 |
mpt_ioctl_header hdr; |
| 295 |
int newImageSize; |
| 296 |
u8 newImage[1]; |
| 297 |
} mpt_ioctl_replace_fw_t; |
| 298 |
|
| 299 |
/* General MPT Pass through data strucutre |
| 300 |
* |
| 301 |
* iocnum |
| 302 |
* timeout - in seconds, command timeout. If 0, set by driver to |
| 303 |
* default value. |
| 304 |
* replyFrameBufPtr - reply location |
| 305 |
* dataInBufPtr - destination for read |
| 306 |
* dataOutBufPtr - data source for write |
| 307 |
* senseDataPtr - sense data location |
| 308 |
* maxReplyBytes - maximum number of reply bytes to be sent to app. |
| 309 |
* dataInSize - num bytes for data transfer in (read) |
| 310 |
* dataOutSize - num bytes for data transfer out (write) |
| 311 |
* dataSgeOffset - offset in words from the start of the request message |
| 312 |
* to the first SGL |
| 313 |
* MF[1]; |
| 314 |
* |
| 315 |
* Remark: Some config pages have bi-directional transfer, |
| 316 |
* both a read and a write. The basic structure allows for |
| 317 |
* a bidirectional set up. Normal messages will have one or |
| 318 |
* both of these buffers NULL. |
| 319 |
*/ |
| 320 |
struct mpt_ioctl_command { |
| 321 |
mpt_ioctl_header hdr; |
| 322 |
int timeout; /* optional (seconds) */ |
| 323 |
char __user *replyFrameBufPtr; |
| 324 |
char __user *dataInBufPtr; |
| 325 |
char __user *dataOutBufPtr; |
| 326 |
char __user *senseDataPtr; |
| 327 |
int maxReplyBytes; |
| 328 |
int dataInSize; |
| 329 |
int dataOutSize; |
| 330 |
int maxSenseBytes; |
| 331 |
int dataSgeOffset; |
| 332 |
char MF[1]; |
| 333 |
}; |
| 334 |
|
| 335 |
/* |
| 336 |
* SPARC PLATFORM: See earlier remark. |
| 337 |
*/ |
| 338 |
#if defined(__KERNEL__) && defined(CONFIG_COMPAT) |
| 339 |
struct mpt_ioctl_command32 { |
| 340 |
mpt_ioctl_header hdr; |
| 341 |
int timeout; |
| 342 |
u32 replyFrameBufPtr; |
| 343 |
u32 dataInBufPtr; |
| 344 |
u32 dataOutBufPtr; |
| 345 |
u32 senseDataPtr; |
| 346 |
int maxReplyBytes; |
| 347 |
int dataInSize; |
| 348 |
int dataOutSize; |
| 349 |
int maxSenseBytes; |
| 350 |
int dataSgeOffset; |
| 351 |
char MF[1]; |
| 352 |
}; |
| 353 |
#endif /*}*/ |
| 354 |
|
| 355 |
|
| 356 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 357 |
|
| 358 |
#define CPQFCTS_IOC_MAGIC 'Z' |
| 359 |
#define HP_IOC_MAGIC 'Z' |
| 360 |
#define HP_GETHOSTINFO _IOR(HP_IOC_MAGIC, 20, hp_host_info_t) |
| 361 |
#define HP_GETHOSTINFO1 _IOR(HP_IOC_MAGIC, 20, hp_host_info_rev0_t) |
| 362 |
#define HP_GETTARGETINFO _IOR(HP_IOC_MAGIC, 21, hp_target_info_t) |
| 363 |
|
| 364 |
typedef struct _hp_header { |
| 365 |
unsigned int iocnum; |
| 366 |
unsigned int host; |
| 367 |
unsigned int channel; |
| 368 |
unsigned int id; |
| 369 |
unsigned int lun; |
| 370 |
} hp_header_t; |
| 371 |
|
| 372 |
/* |
| 373 |
* Header: |
| 374 |
* iocnum required (input) |
| 375 |
* host ignored |
| 376 |
* channe ignored |
| 377 |
* id ignored |
| 378 |
* lun ignored |
| 379 |
*/ |
| 380 |
typedef struct _hp_host_info { |
| 381 |
hp_header_t hdr; |
| 382 |
u16 vendor; |
| 383 |
u16 device; |
| 384 |
u16 subsystem_vendor; |
| 385 |
u16 subsystem_id; |
| 386 |
u8 devfn; |
| 387 |
u8 bus; |
| 388 |
ushort host_no; /* SCSI Host number, if scsi driver not loaded*/ |
| 389 |
u8 fw_version[16]; /* string */ |
| 390 |
u8 serial_number[24]; /* string */ |
| 391 |
u32 ioc_status; |
| 392 |
u32 bus_phys_width; |
| 393 |
u32 base_io_addr; |
| 394 |
u32 rsvd; |
| 395 |
unsigned int hard_resets; /* driver initiated resets */ |
| 396 |
unsigned int soft_resets; /* ioc, external resets */ |
| 397 |
unsigned int timeouts; /* num timeouts */ |
| 398 |
} hp_host_info_t; |
| 399 |
|
| 400 |
/* replace ulongs with uints, need to preserve backwards |
| 401 |
* compatibility. |
| 402 |
*/ |
| 403 |
typedef struct _hp_host_info_rev0 { |
| 404 |
hp_header_t hdr; |
| 405 |
u16 vendor; |
| 406 |
u16 device; |
| 407 |
u16 subsystem_vendor; |
| 408 |
u16 subsystem_id; |
| 409 |
u8 devfn; |
| 410 |
u8 bus; |
| 411 |
ushort host_no; /* SCSI Host number, if scsi driver not loaded*/ |
| 412 |
u8 fw_version[16]; /* string */ |
| 413 |
u8 serial_number[24]; /* string */ |
| 414 |
u32 ioc_status; |
| 415 |
u32 bus_phys_width; |
| 416 |
u32 base_io_addr; |
| 417 |
u32 rsvd; |
| 418 |
unsigned long hard_resets; /* driver initiated resets */ |
| 419 |
unsigned long soft_resets; /* ioc, external resets */ |
| 420 |
unsigned long timeouts; /* num timeouts */ |
| 421 |
} hp_host_info_rev0_t; |
| 422 |
|
| 423 |
/* |
| 424 |
* Header: |
| 425 |
* iocnum required (input) |
| 426 |
* host required |
| 427 |
* channel required (bus number) |
| 428 |
* id required |
| 429 |
* lun ignored |
| 430 |
* |
| 431 |
* All error values between 0 and 0xFFFF in size. |
| 432 |
*/ |
| 433 |
typedef struct _hp_target_info { |
| 434 |
hp_header_t hdr; |
| 435 |
u32 parity_errors; |
| 436 |
u32 phase_errors; |
| 437 |
u32 select_timeouts; |
| 438 |
u32 message_rejects; |
| 439 |
u32 negotiated_speed; |
| 440 |
u8 negotiated_width; |
| 441 |
u8 rsvd[7]; /* 8 byte alignment */ |
| 442 |
} hp_target_info_t; |
| 443 |
|
| 444 |
#define HP_STATUS_OTHER 1 |
| 445 |
#define HP_STATUS_OK 2 |
| 446 |
#define HP_STATUS_FAILED 3 |
| 447 |
|
| 448 |
#define HP_BUS_WIDTH_UNK 1 |
| 449 |
#define HP_BUS_WIDTH_8 2 |
| 450 |
#define HP_BUS_WIDTH_16 3 |
| 451 |
#define HP_BUS_WIDTH_32 4 |
| 452 |
|
| 453 |
#define HP_DEV_SPEED_ASYNC 2 |
| 454 |
#define HP_DEV_SPEED_FAST 3 |
| 455 |
#define HP_DEV_SPEED_ULTRA 4 |
| 456 |
#define HP_DEV_SPEED_ULTRA2 5 |
| 457 |
#define HP_DEV_SPEED_ULTRA160 6 |
| 458 |
#define HP_DEV_SPEED_SCSI1 7 |
| 459 |
#define HP_DEV_SPEED_ULTRA320 8 |
| 460 |
|
| 461 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 462 |
|
| 463 |
|
| 464 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 465 |
|
| 466 |
#endif |
| 467 |
|