| 1 |
/* |
| 2 |
* linux/drivers/message/fusion/mptbase.c |
| 3 |
* This is the Fusion MPT base driver which supports multiple |
| 4 |
* (SCSI + LAN) specialized protocol drivers. |
| 5 |
* For use with LSI PCI chip/adapter(s) |
| 6 |
* running LSI Fusion MPT (Message Passing Technology) firmware. |
| 7 |
* |
| 8 |
* Copyright (c) 1999-2008 LSI Corporation |
| 9 |
* (mailto:[email protected]) |
| 10 |
* |
| 11 |
*/ |
| 12 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 13 |
/* |
| 14 |
This program is free software; you can redistribute it and/or modify |
| 15 |
it under the terms of the GNU General Public License as published by |
| 16 |
the Free Software Foundation; version 2 of the License. |
| 17 |
|
| 18 |
This program is distributed in the hope that it will be useful, |
| 19 |
but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 20 |
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 21 |
GNU General Public License for more details. |
| 22 |
|
| 23 |
NO WARRANTY |
| 24 |
THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR |
| 25 |
CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT |
| 26 |
LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, |
| 27 |
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is |
| 28 |
solely responsible for determining the appropriateness of using and |
| 29 |
distributing the Program and assumes all risks associated with its |
| 30 |
exercise of rights under this Agreement, including but not limited to |
| 31 |
the risks and costs of program errors, damage to or loss of data, |
| 32 |
programs or equipment, and unavailability or interruption of operations. |
| 33 |
|
| 34 |
DISCLAIMER OF LIABILITY |
| 35 |
NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY |
| 36 |
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| 37 |
DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND |
| 38 |
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR |
| 39 |
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE |
| 40 |
USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED |
| 41 |
HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES |
| 42 |
|
| 43 |
You should have received a copy of the GNU General Public License |
| 44 |
along with this program; if not, write to the Free Software |
| 45 |
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| 46 |
*/ |
| 47 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 48 |
|
| 49 |
#include <linux/kernel.h> |
| 50 |
#include <linux/module.h> |
| 51 |
#include <linux/errno.h> |
| 52 |
#include <linux/init.h> |
| 53 |
#include <linux/seq_file.h> |
| 54 |
#include <linux/slab.h> |
| 55 |
#include <linux/types.h> |
| 56 |
#include <linux/pci.h> |
| 57 |
#include <linux/kdev_t.h> |
| 58 |
#include <linux/blkdev.h> |
| 59 |
#include <linux/delay.h> |
| 60 |
#include <linux/interrupt.h> |
| 61 |
#include <linux/dma-mapping.h> |
| 62 |
#include <linux/kthread.h> |
| 63 |
#include <scsi/scsi_host.h> |
| 64 |
|
| 65 |
#include "mptbase.h" |
| 66 |
#include "lsi/mpi_log_fc.h" |
| 67 |
|
| 68 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 69 |
#define my_NAME "Fusion MPT base driver" |
| 70 |
#define my_VERSION MPT_LINUX_VERSION_COMMON |
| 71 |
#define MYNAM "mptbase" |
| 72 |
|
| 73 |
MODULE_AUTHOR(MODULEAUTHOR); |
| 74 |
MODULE_DESCRIPTION(my_NAME); |
| 75 |
MODULE_LICENSE("GPL"); |
| 76 |
MODULE_VERSION(my_VERSION); |
| 77 |
|
| 78 |
/* |
| 79 |
* cmd line parameters |
| 80 |
*/ |
| 81 |
|
| 82 |
static int mpt_msi_enable_spi; |
| 83 |
module_param(mpt_msi_enable_spi, int, 0); |
| 84 |
MODULE_PARM_DESC(mpt_msi_enable_spi, |
| 85 |
" Enable MSI Support for SPI controllers (default=0)"); |
| 86 |
|
| 87 |
static int mpt_msi_enable_fc; |
| 88 |
module_param(mpt_msi_enable_fc, int, 0); |
| 89 |
MODULE_PARM_DESC(mpt_msi_enable_fc, |
| 90 |
" Enable MSI Support for FC controllers (default=0)"); |
| 91 |
|
| 92 |
static int mpt_msi_enable_sas; |
| 93 |
module_param(mpt_msi_enable_sas, int, 0); |
| 94 |
MODULE_PARM_DESC(mpt_msi_enable_sas, |
| 95 |
" Enable MSI Support for SAS controllers (default=0)"); |
| 96 |
|
| 97 |
static int mpt_channel_mapping; |
| 98 |
module_param(mpt_channel_mapping, int, 0); |
| 99 |
MODULE_PARM_DESC(mpt_channel_mapping, " Mapping id's to channels (default=0)"); |
| 100 |
|
| 101 |
static int mpt_debug_level; |
| 102 |
static int mpt_set_debug_level(const char *val, const struct kernel_param *kp); |
| 103 |
module_param_call(mpt_debug_level, mpt_set_debug_level, param_get_int, |
| 104 |
&mpt_debug_level, 0600); |
| 105 |
MODULE_PARM_DESC(mpt_debug_level, |
| 106 |
" debug level - refer to mptdebug.h - (default=0)"); |
| 107 |
|
| 108 |
int mpt_fwfault_debug; |
| 109 |
EXPORT_SYMBOL(mpt_fwfault_debug); |
| 110 |
module_param(mpt_fwfault_debug, int, 0600); |
| 111 |
MODULE_PARM_DESC(mpt_fwfault_debug, |
| 112 |
"Enable detection of Firmware fault and halt Firmware on fault - (default=0)"); |
| 113 |
|
| 114 |
static char MptCallbacksName[MPT_MAX_PROTOCOL_DRIVERS] |
| 115 |
[MPT_MAX_CALLBACKNAME_LEN+1]; |
| 116 |
|
| 117 |
#ifdef MFCNT |
| 118 |
static int mfcounter = 0; |
| 119 |
#define PRINT_MF_COUNT 20000 |
| 120 |
#endif |
| 121 |
|
| 122 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 123 |
/* |
| 124 |
* Public data... |
| 125 |
*/ |
| 126 |
|
| 127 |
#define WHOINIT_UNKNOWN 0xAA |
| 128 |
|
| 129 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 130 |
/* |
| 131 |
* Private data... |
| 132 |
*/ |
| 133 |
/* Adapter link list */ |
| 134 |
LIST_HEAD(ioc_list); |
| 135 |
/* Callback lookup table */ |
| 136 |
static MPT_CALLBACK MptCallbacks[MPT_MAX_PROTOCOL_DRIVERS]; |
| 137 |
/* Protocol driver class lookup table */ |
| 138 |
static int MptDriverClass[MPT_MAX_PROTOCOL_DRIVERS]; |
| 139 |
/* Event handler lookup table */ |
| 140 |
static MPT_EVHANDLER MptEvHandlers[MPT_MAX_PROTOCOL_DRIVERS]; |
| 141 |
/* Reset handler lookup table */ |
| 142 |
static MPT_RESETHANDLER MptResetHandlers[MPT_MAX_PROTOCOL_DRIVERS]; |
| 143 |
static struct mpt_pci_driver *MptDeviceDriverHandlers[MPT_MAX_PROTOCOL_DRIVERS]; |
| 144 |
|
| 145 |
#ifdef CONFIG_PROC_FS |
| 146 |
static struct proc_dir_entry *mpt_proc_root_dir; |
| 147 |
#endif |
| 148 |
|
| 149 |
/* |
| 150 |
* Driver Callback Index's |
| 151 |
*/ |
| 152 |
static u8 mpt_base_index = MPT_MAX_PROTOCOL_DRIVERS; |
| 153 |
static u8 last_drv_idx; |
| 154 |
|
| 155 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 156 |
/* |
| 157 |
* Forward protos... |
| 158 |
*/ |
| 159 |
static irqreturn_t mpt_interrupt(int irq, void *bus_id); |
| 160 |
static int mptbase_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, |
| 161 |
MPT_FRAME_HDR *reply); |
| 162 |
static int mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes, |
| 163 |
u32 *req, int replyBytes, u16 *u16reply, int maxwait, |
| 164 |
int sleepFlag); |
| 165 |
static int mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag); |
| 166 |
static void mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev); |
| 167 |
static void mpt_adapter_disable(MPT_ADAPTER *ioc); |
| 168 |
static void mpt_adapter_dispose(MPT_ADAPTER *ioc); |
| 169 |
|
| 170 |
static void MptDisplayIocCapabilities(MPT_ADAPTER *ioc); |
| 171 |
static int MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag); |
| 172 |
static int GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason); |
| 173 |
static int GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag); |
| 174 |
static int SendIocInit(MPT_ADAPTER *ioc, int sleepFlag); |
| 175 |
static int SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag); |
| 176 |
static int mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag); |
| 177 |
static int mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag); |
| 178 |
static int mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag); |
| 179 |
static int KickStart(MPT_ADAPTER *ioc, int ignore, int sleepFlag); |
| 180 |
static int SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag); |
| 181 |
static int PrimeIocFifos(MPT_ADAPTER *ioc); |
| 182 |
static int WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag); |
| 183 |
static int WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag); |
| 184 |
static int WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag); |
| 185 |
static int GetLanConfigPages(MPT_ADAPTER *ioc); |
| 186 |
static int GetIoUnitPage2(MPT_ADAPTER *ioc); |
| 187 |
int mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode); |
| 188 |
static int mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum); |
| 189 |
static int mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum); |
| 190 |
static void mpt_read_ioc_pg_1(MPT_ADAPTER *ioc); |
| 191 |
static void mpt_read_ioc_pg_4(MPT_ADAPTER *ioc); |
| 192 |
static void mpt_get_manufacturing_pg_0(MPT_ADAPTER *ioc); |
| 193 |
static int SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch, |
| 194 |
int sleepFlag); |
| 195 |
static int SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp); |
| 196 |
static int mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag); |
| 197 |
static int mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init); |
| 198 |
|
| 199 |
#ifdef CONFIG_PROC_FS |
| 200 |
static int mpt_summary_proc_show(struct seq_file *m, void *v); |
| 201 |
static int mpt_version_proc_show(struct seq_file *m, void *v); |
| 202 |
static int mpt_iocinfo_proc_show(struct seq_file *m, void *v); |
| 203 |
#endif |
| 204 |
static void mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc); |
| 205 |
|
| 206 |
static int ProcessEventNotification(MPT_ADAPTER *ioc, |
| 207 |
EventNotificationReply_t *evReply, int *evHandlers); |
| 208 |
static void mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf); |
| 209 |
static void mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info); |
| 210 |
static void mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info); |
| 211 |
static void mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info , u8 cb_idx); |
| 212 |
static int mpt_read_ioc_pg_3(MPT_ADAPTER *ioc); |
| 213 |
static void mpt_inactive_raid_list_free(MPT_ADAPTER *ioc); |
| 214 |
|
| 215 |
/* module entry point */ |
| 216 |
static int __init fusion_init (void); |
| 217 |
static void __exit fusion_exit (void); |
| 218 |
|
| 219 |
#define CHIPREG_READ32(addr) readl_relaxed(addr) |
| 220 |
#define CHIPREG_READ32_dmasync(addr) readl(addr) |
| 221 |
#define CHIPREG_WRITE32(addr,val) writel(val, addr) |
| 222 |
#define CHIPREG_PIO_WRITE32(addr,val) outl(val, (unsigned long)addr) |
| 223 |
#define CHIPREG_PIO_READ32(addr) inl((unsigned long)addr) |
| 224 |
|
| 225 |
static void |
| 226 |
pci_disable_io_access(struct pci_dev *pdev) |
| 227 |
{ |
| 228 |
u16 command_reg; |
| 229 |
|
| 230 |
pci_read_config_word(pdev, PCI_COMMAND, &command_reg); |
| 231 |
command_reg &= ~1; |
| 232 |
pci_write_config_word(pdev, PCI_COMMAND, command_reg); |
| 233 |
} |
| 234 |
|
| 235 |
static void |
| 236 |
pci_enable_io_access(struct pci_dev *pdev) |
| 237 |
{ |
| 238 |
u16 command_reg; |
| 239 |
|
| 240 |
pci_read_config_word(pdev, PCI_COMMAND, &command_reg); |
| 241 |
command_reg |= 1; |
| 242 |
pci_write_config_word(pdev, PCI_COMMAND, command_reg); |
| 243 |
} |
| 244 |
|
| 245 |
static int mpt_set_debug_level(const char *val, const struct kernel_param *kp) |
| 246 |
{ |
| 247 |
int ret = param_set_int(val, kp); |
| 248 |
MPT_ADAPTER *ioc; |
| 249 |
|
| 250 |
if (ret) |
| 251 |
return ret; |
| 252 |
|
| 253 |
list_for_each_entry(ioc, &ioc_list, list) |
| 254 |
ioc->debug_level = mpt_debug_level; |
| 255 |
return 0; |
| 256 |
} |
| 257 |
|
| 258 |
/** |
| 259 |
* mpt_get_cb_idx - obtain cb_idx for registered driver |
| 260 |
* @dclass: class driver enum |
| 261 |
* |
| 262 |
* Returns cb_idx, or zero means it wasn't found |
| 263 |
**/ |
| 264 |
static u8 |
| 265 |
mpt_get_cb_idx(MPT_DRIVER_CLASS dclass) |
| 266 |
{ |
| 267 |
u8 cb_idx; |
| 268 |
|
| 269 |
for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) |
| 270 |
if (MptDriverClass[cb_idx] == dclass) |
| 271 |
return cb_idx; |
| 272 |
return 0; |
| 273 |
} |
| 274 |
|
| 275 |
/** |
| 276 |
* mpt_is_discovery_complete - determine if discovery has completed |
| 277 |
* @ioc: per adatper instance |
| 278 |
* |
| 279 |
* Returns 1 when discovery completed, else zero. |
| 280 |
*/ |
| 281 |
static int |
| 282 |
mpt_is_discovery_complete(MPT_ADAPTER *ioc) |
| 283 |
{ |
| 284 |
ConfigExtendedPageHeader_t hdr; |
| 285 |
CONFIGPARMS cfg; |
| 286 |
SasIOUnitPage0_t *buffer; |
| 287 |
dma_addr_t dma_handle; |
| 288 |
int rc = 0; |
| 289 |
|
| 290 |
memset(&hdr, 0, sizeof(ConfigExtendedPageHeader_t)); |
| 291 |
memset(&cfg, 0, sizeof(CONFIGPARMS)); |
| 292 |
hdr.PageVersion = MPI_SASIOUNITPAGE0_PAGEVERSION; |
| 293 |
hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED; |
| 294 |
hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_IO_UNIT; |
| 295 |
cfg.cfghdr.ehdr = &hdr; |
| 296 |
cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; |
| 297 |
|
| 298 |
if ((mpt_config(ioc, &cfg))) |
| 299 |
goto out; |
| 300 |
if (!hdr.ExtPageLength) |
| 301 |
goto out; |
| 302 |
|
| 303 |
buffer = dma_alloc_coherent(&ioc->pcidev->dev, hdr.ExtPageLength * 4, |
| 304 |
&dma_handle, GFP_KERNEL); |
| 305 |
if (!buffer) |
| 306 |
goto out; |
| 307 |
|
| 308 |
cfg.physAddr = dma_handle; |
| 309 |
cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; |
| 310 |
|
| 311 |
if ((mpt_config(ioc, &cfg))) |
| 312 |
goto out_free_consistent; |
| 313 |
|
| 314 |
if (!(buffer->PhyData[0].PortFlags & |
| 315 |
MPI_SAS_IOUNIT0_PORT_FLAGS_DISCOVERY_IN_PROGRESS)) |
| 316 |
rc = 1; |
| 317 |
|
| 318 |
out_free_consistent: |
| 319 |
dma_free_coherent(&ioc->pcidev->dev, hdr.ExtPageLength * 4, buffer, |
| 320 |
dma_handle); |
| 321 |
out: |
| 322 |
return rc; |
| 323 |
} |
| 324 |
|
| 325 |
|
| 326 |
/** |
| 327 |
* mpt_remove_dead_ioc_func - kthread context to remove dead ioc |
| 328 |
* @arg: input argument, used to derive ioc |
| 329 |
* |
| 330 |
* Return 0 if controller is removed from pci subsystem. |
| 331 |
* Return -1 for other case. |
| 332 |
*/ |
| 333 |
static int mpt_remove_dead_ioc_func(void *arg) |
| 334 |
{ |
| 335 |
MPT_ADAPTER *ioc = (MPT_ADAPTER *)arg; |
| 336 |
struct pci_dev *pdev; |
| 337 |
|
| 338 |
if (!ioc) |
| 339 |
return -1; |
| 340 |
|
| 341 |
pdev = ioc->pcidev; |
| 342 |
if (!pdev) |
| 343 |
return -1; |
| 344 |
|
| 345 |
pci_stop_and_remove_bus_device_locked(pdev); |
| 346 |
return 0; |
| 347 |
} |
| 348 |
|
| 349 |
|
| 350 |
|
| 351 |
/** |
| 352 |
* mpt_fault_reset_work - work performed on workq after ioc fault |
| 353 |
* @work: input argument, used to derive ioc |
| 354 |
* |
| 355 |
**/ |
| 356 |
static void |
| 357 |
mpt_fault_reset_work(struct work_struct *work) |
| 358 |
{ |
| 359 |
MPT_ADAPTER *ioc = |
| 360 |
container_of(work, MPT_ADAPTER, fault_reset_work.work); |
| 361 |
u32 ioc_raw_state; |
| 362 |
int rc; |
| 363 |
unsigned long flags; |
| 364 |
MPT_SCSI_HOST *hd; |
| 365 |
struct task_struct *p; |
| 366 |
|
| 367 |
if (ioc->ioc_reset_in_progress || !ioc->active) |
| 368 |
goto out; |
| 369 |
|
| 370 |
|
| 371 |
ioc_raw_state = mpt_GetIocState(ioc, 0); |
| 372 |
if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_MASK) { |
| 373 |
printk(MYIOC_s_INFO_FMT "%s: IOC is non-operational !!!!\n", |
| 374 |
ioc->name, __func__); |
| 375 |
|
| 376 |
/* |
| 377 |
* Call mptscsih_flush_pending_cmds callback so that we |
| 378 |
* flush all pending commands back to OS. |
| 379 |
* This call is required to aovid deadlock at block layer. |
| 380 |
* Dead IOC will fail to do diag reset,and this call is safe |
| 381 |
* since dead ioc will never return any command back from HW. |
| 382 |
*/ |
| 383 |
hd = shost_priv(ioc->sh); |
| 384 |
ioc->schedule_dead_ioc_flush_running_cmds(hd); |
| 385 |
|
| 386 |
/*Remove the Dead Host */ |
| 387 |
p = kthread_run(mpt_remove_dead_ioc_func, ioc, |
| 388 |
"mpt_dead_ioc_%d", ioc->id); |
| 389 |
if (IS_ERR(p)) { |
| 390 |
printk(MYIOC_s_ERR_FMT |
| 391 |
"%s: Running mpt_dead_ioc thread failed !\n", |
| 392 |
ioc->name, __func__); |
| 393 |
} else { |
| 394 |
printk(MYIOC_s_WARN_FMT |
| 395 |
"%s: Running mpt_dead_ioc thread success !\n", |
| 396 |
ioc->name, __func__); |
| 397 |
} |
| 398 |
return; /* don't rearm timer */ |
| 399 |
} |
| 400 |
|
| 401 |
if ((ioc_raw_state & MPI_IOC_STATE_MASK) |
| 402 |
== MPI_IOC_STATE_FAULT) { |
| 403 |
printk(MYIOC_s_WARN_FMT "IOC is in FAULT state (%04xh)!!!\n", |
| 404 |
ioc->name, ioc_raw_state & MPI_DOORBELL_DATA_MASK); |
| 405 |
printk(MYIOC_s_WARN_FMT "Issuing HardReset from %s!!\n", |
| 406 |
ioc->name, __func__); |
| 407 |
rc = mpt_HardResetHandler(ioc, CAN_SLEEP); |
| 408 |
printk(MYIOC_s_WARN_FMT "%s: HardReset: %s\n", ioc->name, |
| 409 |
__func__, (rc == 0) ? "success" : "failed"); |
| 410 |
ioc_raw_state = mpt_GetIocState(ioc, 0); |
| 411 |
if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) |
| 412 |
printk(MYIOC_s_WARN_FMT "IOC is in FAULT state after " |
| 413 |
"reset (%04xh)\n", ioc->name, ioc_raw_state & |
| 414 |
MPI_DOORBELL_DATA_MASK); |
| 415 |
} else if (ioc->bus_type == SAS && ioc->sas_discovery_quiesce_io) { |
| 416 |
if ((mpt_is_discovery_complete(ioc))) { |
| 417 |
devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "clearing " |
| 418 |
"discovery_quiesce_io flag\n", ioc->name)); |
| 419 |
ioc->sas_discovery_quiesce_io = 0; |
| 420 |
} |
| 421 |
} |
| 422 |
|
| 423 |
out: |
| 424 |
/* |
| 425 |
* Take turns polling alternate controller |
| 426 |
*/ |
| 427 |
if (ioc->alt_ioc) |
| 428 |
ioc = ioc->alt_ioc; |
| 429 |
|
| 430 |
/* rearm the timer */ |
| 431 |
spin_lock_irqsave(&ioc->taskmgmt_lock, flags); |
| 432 |
if (ioc->reset_work_q) |
| 433 |
queue_delayed_work(ioc->reset_work_q, &ioc->fault_reset_work, |
| 434 |
msecs_to_jiffies(MPT_POLLING_INTERVAL)); |
| 435 |
spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); |
| 436 |
} |
| 437 |
|
| 438 |
|
| 439 |
/* |
| 440 |
* Process turbo (context) reply... |
| 441 |
*/ |
| 442 |
static void |
| 443 |
mpt_turbo_reply(MPT_ADAPTER *ioc, u32 pa) |
| 444 |
{ |
| 445 |
MPT_FRAME_HDR *mf = NULL; |
| 446 |
MPT_FRAME_HDR *mr = NULL; |
| 447 |
u16 req_idx = 0; |
| 448 |
u8 cb_idx; |
| 449 |
|
| 450 |
dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got TURBO reply req_idx=%08x\n", |
| 451 |
ioc->name, pa)); |
| 452 |
|
| 453 |
switch (pa >> MPI_CONTEXT_REPLY_TYPE_SHIFT) { |
| 454 |
case MPI_CONTEXT_REPLY_TYPE_SCSI_INIT: |
| 455 |
req_idx = pa & 0x0000FFFF; |
| 456 |
cb_idx = (pa & 0x00FF0000) >> 16; |
| 457 |
mf = MPT_INDEX_2_MFPTR(ioc, req_idx); |
| 458 |
break; |
| 459 |
case MPI_CONTEXT_REPLY_TYPE_LAN: |
| 460 |
cb_idx = mpt_get_cb_idx(MPTLAN_DRIVER); |
| 461 |
/* |
| 462 |
* Blind set of mf to NULL here was fatal |
| 463 |
* after lan_reply says "freeme" |
| 464 |
* Fix sort of combined with an optimization here; |
| 465 |
* added explicit check for case where lan_reply |
| 466 |
* was just returning 1 and doing nothing else. |
| 467 |
* For this case skip the callback, but set up |
| 468 |
* proper mf value first here:-) |
| 469 |
*/ |
| 470 |
if ((pa & 0x58000000) == 0x58000000) { |
| 471 |
req_idx = pa & 0x0000FFFF; |
| 472 |
mf = MPT_INDEX_2_MFPTR(ioc, req_idx); |
| 473 |
mpt_free_msg_frame(ioc, mf); |
| 474 |
mb(); |
| 475 |
return; |
| 476 |
} |
| 477 |
mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa); |
| 478 |
break; |
| 479 |
case MPI_CONTEXT_REPLY_TYPE_SCSI_TARGET: |
| 480 |
cb_idx = mpt_get_cb_idx(MPTSTM_DRIVER); |
| 481 |
mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa); |
| 482 |
break; |
| 483 |
default: |
| 484 |
cb_idx = 0; |
| 485 |
BUG(); |
| 486 |
} |
| 487 |
|
| 488 |
/* Check for (valid) IO callback! */ |
| 489 |
if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS || |
| 490 |
MptCallbacks[cb_idx] == NULL) { |
| 491 |
printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n", |
| 492 |
__func__, ioc->name, cb_idx); |
| 493 |
goto out; |
| 494 |
} |
| 495 |
|
| 496 |
if (MptCallbacks[cb_idx](ioc, mf, mr)) |
| 497 |
mpt_free_msg_frame(ioc, mf); |
| 498 |
out: |
| 499 |
mb(); |
| 500 |
} |
| 501 |
|
| 502 |
static void |
| 503 |
mpt_reply(MPT_ADAPTER *ioc, u32 pa) |
| 504 |
{ |
| 505 |
MPT_FRAME_HDR *mf; |
| 506 |
MPT_FRAME_HDR *mr; |
| 507 |
u16 req_idx; |
| 508 |
u8 cb_idx; |
| 509 |
int freeme; |
| 510 |
|
| 511 |
u32 reply_dma_low; |
| 512 |
u16 ioc_stat; |
| 513 |
|
| 514 |
/* non-TURBO reply! Hmmm, something may be up... |
| 515 |
* Newest turbo reply mechanism; get address |
| 516 |
* via left shift 1 (get rid of MPI_ADDRESS_REPLY_A_BIT)! |
| 517 |
*/ |
| 518 |
|
| 519 |
/* Map DMA address of reply header to cpu address. |
| 520 |
* pa is 32 bits - but the dma address may be 32 or 64 bits |
| 521 |
* get offset based only only the low addresses |
| 522 |
*/ |
| 523 |
|
| 524 |
reply_dma_low = (pa <<= 1); |
| 525 |
mr = (MPT_FRAME_HDR *)((u8 *)ioc->reply_frames + |
| 526 |
(reply_dma_low - ioc->reply_frames_low_dma)); |
| 527 |
|
| 528 |
req_idx = le16_to_cpu(mr->u.frame.hwhdr.msgctxu.fld.req_idx); |
| 529 |
cb_idx = mr->u.frame.hwhdr.msgctxu.fld.cb_idx; |
| 530 |
mf = MPT_INDEX_2_MFPTR(ioc, req_idx); |
| 531 |
|
| 532 |
dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got non-TURBO reply=%p req_idx=%x cb_idx=%x Function=%x\n", |
| 533 |
ioc->name, mr, req_idx, cb_idx, mr->u.hdr.Function)); |
| 534 |
DBG_DUMP_REPLY_FRAME(ioc, (u32 *)mr); |
| 535 |
|
| 536 |
/* Check/log IOC log info |
| 537 |
*/ |
| 538 |
ioc_stat = le16_to_cpu(mr->u.reply.IOCStatus); |
| 539 |
if (ioc_stat & MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) { |
| 540 |
u32 log_info = le32_to_cpu(mr->u.reply.IOCLogInfo); |
| 541 |
if (ioc->bus_type == FC) |
| 542 |
mpt_fc_log_info(ioc, log_info); |
| 543 |
else if (ioc->bus_type == SPI) |
| 544 |
mpt_spi_log_info(ioc, log_info); |
| 545 |
else if (ioc->bus_type == SAS) |
| 546 |
mpt_sas_log_info(ioc, log_info, cb_idx); |
| 547 |
} |
| 548 |
|
| 549 |
if (ioc_stat & MPI_IOCSTATUS_MASK) |
| 550 |
mpt_iocstatus_info(ioc, (u32)ioc_stat, mf); |
| 551 |
|
| 552 |
/* Check for (valid) IO callback! */ |
| 553 |
if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS || |
| 554 |
MptCallbacks[cb_idx] == NULL) { |
| 555 |
printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n", |
| 556 |
__func__, ioc->name, cb_idx); |
| 557 |
freeme = 0; |
| 558 |
goto out; |
| 559 |
} |
| 560 |
|
| 561 |
freeme = MptCallbacks[cb_idx](ioc, mf, mr); |
| 562 |
|
| 563 |
out: |
| 564 |
/* Flush (non-TURBO) reply with a WRITE! */ |
| 565 |
CHIPREG_WRITE32(&ioc->chip->ReplyFifo, pa); |
| 566 |
|
| 567 |
if (freeme) |
| 568 |
mpt_free_msg_frame(ioc, mf); |
| 569 |
mb(); |
| 570 |
} |
| 571 |
|
| 572 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 573 |
/** |
| 574 |
* mpt_interrupt - MPT adapter (IOC) specific interrupt handler. |
| 575 |
* @irq: irq number (not used) |
| 576 |
* @bus_id: bus identifier cookie == pointer to MPT_ADAPTER structure |
| 577 |
* |
| 578 |
* This routine is registered via the request_irq() kernel API call, |
| 579 |
* and handles all interrupts generated from a specific MPT adapter |
| 580 |
* (also referred to as a IO Controller or IOC). |
| 581 |
* This routine must clear the interrupt from the adapter and does |
| 582 |
* so by reading the reply FIFO. Multiple replies may be processed |
| 583 |
* per single call to this routine. |
| 584 |
* |
| 585 |
* This routine handles register-level access of the adapter but |
| 586 |
* dispatches (calls) a protocol-specific callback routine to handle |
| 587 |
* the protocol-specific details of the MPT request completion. |
| 588 |
*/ |
| 589 |
static irqreturn_t |
| 590 |
mpt_interrupt(int irq, void *bus_id) |
| 591 |
{ |
| 592 |
MPT_ADAPTER *ioc = bus_id; |
| 593 |
u32 pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo); |
| 594 |
|
| 595 |
if (pa == 0xFFFFFFFF) |
| 596 |
return IRQ_NONE; |
| 597 |
|
| 598 |
/* |
| 599 |
* Drain the reply FIFO! |
| 600 |
*/ |
| 601 |
do { |
| 602 |
if (pa & MPI_ADDRESS_REPLY_A_BIT) |
| 603 |
mpt_reply(ioc, pa); |
| 604 |
else |
| 605 |
mpt_turbo_reply(ioc, pa); |
| 606 |
pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo); |
| 607 |
} while (pa != 0xFFFFFFFF); |
| 608 |
|
| 609 |
return IRQ_HANDLED; |
| 610 |
} |
| 611 |
|
| 612 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 613 |
/** |
| 614 |
* mptbase_reply - MPT base driver's callback routine |
| 615 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 616 |
* @req: Pointer to original MPT request frame |
| 617 |
* @reply: Pointer to MPT reply frame (NULL if TurboReply) |
| 618 |
* |
| 619 |
* MPT base driver's callback routine; all base driver |
| 620 |
* "internal" request/reply processing is routed here. |
| 621 |
* Currently used for EventNotification and EventAck handling. |
| 622 |
* |
| 623 |
* Returns 1 indicating original alloc'd request frame ptr |
| 624 |
* should be freed, or 0 if it shouldn't. |
| 625 |
*/ |
| 626 |
static int |
| 627 |
mptbase_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply) |
| 628 |
{ |
| 629 |
EventNotificationReply_t *pEventReply; |
| 630 |
u8 event; |
| 631 |
int evHandlers; |
| 632 |
int freereq = 1; |
| 633 |
|
| 634 |
switch (reply->u.hdr.Function) { |
| 635 |
case MPI_FUNCTION_EVENT_NOTIFICATION: |
| 636 |
pEventReply = (EventNotificationReply_t *)reply; |
| 637 |
evHandlers = 0; |
| 638 |
ProcessEventNotification(ioc, pEventReply, &evHandlers); |
| 639 |
event = le32_to_cpu(pEventReply->Event) & 0xFF; |
| 640 |
if (pEventReply->MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY) |
| 641 |
freereq = 0; |
| 642 |
if (event != MPI_EVENT_EVENT_CHANGE) |
| 643 |
break; |
| 644 |
fallthrough; |
| 645 |
case MPI_FUNCTION_CONFIG: |
| 646 |
case MPI_FUNCTION_SAS_IO_UNIT_CONTROL: |
| 647 |
ioc->mptbase_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD; |
| 648 |
ioc->mptbase_cmds.status |= MPT_MGMT_STATUS_RF_VALID; |
| 649 |
memcpy(ioc->mptbase_cmds.reply, reply, |
| 650 |
min(MPT_DEFAULT_FRAME_SIZE, |
| 651 |
4 * reply->u.reply.MsgLength)); |
| 652 |
if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_PENDING) { |
| 653 |
ioc->mptbase_cmds.status &= ~MPT_MGMT_STATUS_PENDING; |
| 654 |
complete(&ioc->mptbase_cmds.done); |
| 655 |
} else |
| 656 |
freereq = 0; |
| 657 |
if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_FREE_MF) |
| 658 |
freereq = 1; |
| 659 |
break; |
| 660 |
case MPI_FUNCTION_EVENT_ACK: |
| 661 |
devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 662 |
"EventAck reply received\n", ioc->name)); |
| 663 |
break; |
| 664 |
default: |
| 665 |
printk(MYIOC_s_ERR_FMT |
| 666 |
"Unexpected msg function (=%02Xh) reply received!\n", |
| 667 |
ioc->name, reply->u.hdr.Function); |
| 668 |
break; |
| 669 |
} |
| 670 |
|
| 671 |
/* |
| 672 |
* Conditionally tell caller to free the original |
| 673 |
* EventNotification/EventAck/unexpected request frame! |
| 674 |
*/ |
| 675 |
return freereq; |
| 676 |
} |
| 677 |
|
| 678 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 679 |
/** |
| 680 |
* mpt_register - Register protocol-specific main callback handler. |
| 681 |
* @cbfunc: callback function pointer |
| 682 |
* @dclass: Protocol driver's class (%MPT_DRIVER_CLASS enum value) |
| 683 |
* @func_name: call function's name |
| 684 |
* |
| 685 |
* This routine is called by a protocol-specific driver (SCSI host, |
| 686 |
* LAN, SCSI target) to register its reply callback routine. Each |
| 687 |
* protocol-specific driver must do this before it will be able to |
| 688 |
* use any IOC resources, such as obtaining request frames. |
| 689 |
* |
| 690 |
* NOTES: The SCSI protocol driver currently calls this routine thrice |
| 691 |
* in order to register separate callbacks; one for "normal" SCSI IO; |
| 692 |
* one for MptScsiTaskMgmt requests; one for Scan/DV requests. |
| 693 |
* |
| 694 |
* Returns u8 valued "handle" in the range (and S.O.D. order) |
| 695 |
* {N,...,7,6,5,...,1} if successful. |
| 696 |
* A return value of MPT_MAX_PROTOCOL_DRIVERS (including zero!) should be |
| 697 |
* considered an error by the caller. |
| 698 |
*/ |
| 699 |
u8 |
| 700 |
mpt_register(MPT_CALLBACK cbfunc, MPT_DRIVER_CLASS dclass, char *func_name) |
| 701 |
{ |
| 702 |
u8 cb_idx; |
| 703 |
last_drv_idx = MPT_MAX_PROTOCOL_DRIVERS; |
| 704 |
|
| 705 |
/* |
| 706 |
* Search for empty callback slot in this order: {N,...,7,6,5,...,1} |
| 707 |
* (slot/handle 0 is reserved!) |
| 708 |
*/ |
| 709 |
for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { |
| 710 |
if (MptCallbacks[cb_idx] == NULL) { |
| 711 |
MptCallbacks[cb_idx] = cbfunc; |
| 712 |
MptDriverClass[cb_idx] = dclass; |
| 713 |
MptEvHandlers[cb_idx] = NULL; |
| 714 |
last_drv_idx = cb_idx; |
| 715 |
strscpy(MptCallbacksName[cb_idx], func_name, |
| 716 |
MPT_MAX_CALLBACKNAME_LEN+1); |
| 717 |
break; |
| 718 |
} |
| 719 |
} |
| 720 |
|
| 721 |
return last_drv_idx; |
| 722 |
} |
| 723 |
|
| 724 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 725 |
/** |
| 726 |
* mpt_deregister - Deregister a protocol drivers resources. |
| 727 |
* @cb_idx: previously registered callback handle |
| 728 |
* |
| 729 |
* Each protocol-specific driver should call this routine when its |
| 730 |
* module is unloaded. |
| 731 |
*/ |
| 732 |
void |
| 733 |
mpt_deregister(u8 cb_idx) |
| 734 |
{ |
| 735 |
if (cb_idx && (cb_idx < MPT_MAX_PROTOCOL_DRIVERS)) { |
| 736 |
MptCallbacks[cb_idx] = NULL; |
| 737 |
MptDriverClass[cb_idx] = MPTUNKNOWN_DRIVER; |
| 738 |
MptEvHandlers[cb_idx] = NULL; |
| 739 |
|
| 740 |
last_drv_idx++; |
| 741 |
} |
| 742 |
} |
| 743 |
|
| 744 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 745 |
/** |
| 746 |
* mpt_event_register - Register protocol-specific event callback handler. |
| 747 |
* @cb_idx: previously registered (via mpt_register) callback handle |
| 748 |
* @ev_cbfunc: callback function |
| 749 |
* |
| 750 |
* This routine can be called by one or more protocol-specific drivers |
| 751 |
* if/when they choose to be notified of MPT events. |
| 752 |
* |
| 753 |
* Returns 0 for success. |
| 754 |
*/ |
| 755 |
int |
| 756 |
mpt_event_register(u8 cb_idx, MPT_EVHANDLER ev_cbfunc) |
| 757 |
{ |
| 758 |
if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS) |
| 759 |
return -1; |
| 760 |
|
| 761 |
MptEvHandlers[cb_idx] = ev_cbfunc; |
| 762 |
return 0; |
| 763 |
} |
| 764 |
|
| 765 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 766 |
/** |
| 767 |
* mpt_event_deregister - Deregister protocol-specific event callback handler |
| 768 |
* @cb_idx: previously registered callback handle |
| 769 |
* |
| 770 |
* Each protocol-specific driver should call this routine |
| 771 |
* when it does not (or can no longer) handle events, |
| 772 |
* or when its module is unloaded. |
| 773 |
*/ |
| 774 |
void |
| 775 |
mpt_event_deregister(u8 cb_idx) |
| 776 |
{ |
| 777 |
if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS) |
| 778 |
return; |
| 779 |
|
| 780 |
MptEvHandlers[cb_idx] = NULL; |
| 781 |
} |
| 782 |
|
| 783 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 784 |
/** |
| 785 |
* mpt_reset_register - Register protocol-specific IOC reset handler. |
| 786 |
* @cb_idx: previously registered (via mpt_register) callback handle |
| 787 |
* @reset_func: reset function |
| 788 |
* |
| 789 |
* This routine can be called by one or more protocol-specific drivers |
| 790 |
* if/when they choose to be notified of IOC resets. |
| 791 |
* |
| 792 |
* Returns 0 for success. |
| 793 |
*/ |
| 794 |
int |
| 795 |
mpt_reset_register(u8 cb_idx, MPT_RESETHANDLER reset_func) |
| 796 |
{ |
| 797 |
if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS) |
| 798 |
return -1; |
| 799 |
|
| 800 |
MptResetHandlers[cb_idx] = reset_func; |
| 801 |
return 0; |
| 802 |
} |
| 803 |
|
| 804 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 805 |
/** |
| 806 |
* mpt_reset_deregister - Deregister protocol-specific IOC reset handler. |
| 807 |
* @cb_idx: previously registered callback handle |
| 808 |
* |
| 809 |
* Each protocol-specific driver should call this routine |
| 810 |
* when it does not (or can no longer) handle IOC reset handling, |
| 811 |
* or when its module is unloaded. |
| 812 |
*/ |
| 813 |
void |
| 814 |
mpt_reset_deregister(u8 cb_idx) |
| 815 |
{ |
| 816 |
if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS) |
| 817 |
return; |
| 818 |
|
| 819 |
MptResetHandlers[cb_idx] = NULL; |
| 820 |
} |
| 821 |
|
| 822 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 823 |
/** |
| 824 |
* mpt_device_driver_register - Register device driver hooks |
| 825 |
* @dd_cbfunc: driver callbacks struct |
| 826 |
* @cb_idx: MPT protocol driver index |
| 827 |
*/ |
| 828 |
int |
| 829 |
mpt_device_driver_register(struct mpt_pci_driver * dd_cbfunc, u8 cb_idx) |
| 830 |
{ |
| 831 |
MPT_ADAPTER *ioc; |
| 832 |
|
| 833 |
if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS) |
| 834 |
return -EINVAL; |
| 835 |
|
| 836 |
MptDeviceDriverHandlers[cb_idx] = dd_cbfunc; |
| 837 |
|
| 838 |
/* call per pci device probe entry point */ |
| 839 |
list_for_each_entry(ioc, &ioc_list, list) { |
| 840 |
if (dd_cbfunc->probe) |
| 841 |
dd_cbfunc->probe(ioc->pcidev); |
| 842 |
} |
| 843 |
|
| 844 |
return 0; |
| 845 |
} |
| 846 |
|
| 847 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 848 |
/** |
| 849 |
* mpt_device_driver_deregister - DeRegister device driver hooks |
| 850 |
* @cb_idx: MPT protocol driver index |
| 851 |
*/ |
| 852 |
void |
| 853 |
mpt_device_driver_deregister(u8 cb_idx) |
| 854 |
{ |
| 855 |
struct mpt_pci_driver *dd_cbfunc; |
| 856 |
MPT_ADAPTER *ioc; |
| 857 |
|
| 858 |
if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS) |
| 859 |
return; |
| 860 |
|
| 861 |
dd_cbfunc = MptDeviceDriverHandlers[cb_idx]; |
| 862 |
|
| 863 |
list_for_each_entry(ioc, &ioc_list, list) { |
| 864 |
if (dd_cbfunc->remove) |
| 865 |
dd_cbfunc->remove(ioc->pcidev); |
| 866 |
} |
| 867 |
|
| 868 |
MptDeviceDriverHandlers[cb_idx] = NULL; |
| 869 |
} |
| 870 |
|
| 871 |
|
| 872 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 873 |
/** |
| 874 |
* mpt_get_msg_frame - Obtain an MPT request frame from the pool |
| 875 |
* @cb_idx: Handle of registered MPT protocol driver |
| 876 |
* @ioc: Pointer to MPT adapter structure |
| 877 |
* |
| 878 |
* Obtain an MPT request frame from the pool (of 1024) that are |
| 879 |
* allocated per MPT adapter. |
| 880 |
* |
| 881 |
* Returns pointer to a MPT request frame or %NULL if none are available |
| 882 |
* or IOC is not active. |
| 883 |
*/ |
| 884 |
MPT_FRAME_HDR* |
| 885 |
mpt_get_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc) |
| 886 |
{ |
| 887 |
MPT_FRAME_HDR *mf; |
| 888 |
unsigned long flags; |
| 889 |
u16 req_idx; /* Request index */ |
| 890 |
|
| 891 |
/* validate handle and ioc identifier */ |
| 892 |
|
| 893 |
#ifdef MFCNT |
| 894 |
if (!ioc->active) |
| 895 |
printk(MYIOC_s_WARN_FMT "IOC Not Active! mpt_get_msg_frame " |
| 896 |
"returning NULL!\n", ioc->name); |
| 897 |
#endif |
| 898 |
|
| 899 |
/* If interrupts are not attached, do not return a request frame */ |
| 900 |
if (!ioc->active) |
| 901 |
return NULL; |
| 902 |
|
| 903 |
spin_lock_irqsave(&ioc->FreeQlock, flags); |
| 904 |
if (!list_empty(&ioc->FreeQ)) { |
| 905 |
int req_offset; |
| 906 |
|
| 907 |
mf = list_entry(ioc->FreeQ.next, MPT_FRAME_HDR, |
| 908 |
u.frame.linkage.list); |
| 909 |
list_del(&mf->u.frame.linkage.list); |
| 910 |
mf->u.frame.linkage.arg1 = 0; |
| 911 |
mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx; /* byte */ |
| 912 |
req_offset = (u8 *)mf - (u8 *)ioc->req_frames; |
| 913 |
/* u16! */ |
| 914 |
req_idx = req_offset / ioc->req_sz; |
| 915 |
mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx); |
| 916 |
mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0; |
| 917 |
/* Default, will be changed if necessary in SG generation */ |
| 918 |
ioc->RequestNB[req_idx] = ioc->NB_for_64_byte_frame; |
| 919 |
#ifdef MFCNT |
| 920 |
ioc->mfcnt++; |
| 921 |
#endif |
| 922 |
} |
| 923 |
else |
| 924 |
mf = NULL; |
| 925 |
spin_unlock_irqrestore(&ioc->FreeQlock, flags); |
| 926 |
|
| 927 |
#ifdef MFCNT |
| 928 |
if (mf == NULL) |
| 929 |
printk(MYIOC_s_WARN_FMT "IOC Active. No free Msg Frames! " |
| 930 |
"Count 0x%x Max 0x%x\n", ioc->name, ioc->mfcnt, |
| 931 |
ioc->req_depth); |
| 932 |
mfcounter++; |
| 933 |
if (mfcounter == PRINT_MF_COUNT) |
| 934 |
printk(MYIOC_s_INFO_FMT "MF Count 0x%x Max 0x%x \n", ioc->name, |
| 935 |
ioc->mfcnt, ioc->req_depth); |
| 936 |
#endif |
| 937 |
|
| 938 |
dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_get_msg_frame(%d,%d), got mf=%p\n", |
| 939 |
ioc->name, cb_idx, ioc->id, mf)); |
| 940 |
return mf; |
| 941 |
} |
| 942 |
|
| 943 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 944 |
/** |
| 945 |
* mpt_put_msg_frame - Send a protocol-specific MPT request frame to an IOC |
| 946 |
* @cb_idx: Handle of registered MPT protocol driver |
| 947 |
* @ioc: Pointer to MPT adapter structure |
| 948 |
* @mf: Pointer to MPT request frame |
| 949 |
* |
| 950 |
* This routine posts an MPT request frame to the request post FIFO of a |
| 951 |
* specific MPT adapter. |
| 952 |
*/ |
| 953 |
void |
| 954 |
mpt_put_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf) |
| 955 |
{ |
| 956 |
u32 mf_dma_addr; |
| 957 |
int req_offset; |
| 958 |
u16 req_idx; /* Request index */ |
| 959 |
|
| 960 |
/* ensure values are reset properly! */ |
| 961 |
mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx; /* byte */ |
| 962 |
req_offset = (u8 *)mf - (u8 *)ioc->req_frames; |
| 963 |
/* u16! */ |
| 964 |
req_idx = req_offset / ioc->req_sz; |
| 965 |
mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx); |
| 966 |
mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0; |
| 967 |
|
| 968 |
DBG_DUMP_PUT_MSG_FRAME(ioc, (u32 *)mf); |
| 969 |
|
| 970 |
mf_dma_addr = (ioc->req_frames_low_dma + req_offset) | ioc->RequestNB[req_idx]; |
| 971 |
dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mf_dma_addr=%x req_idx=%d " |
| 972 |
"RequestNB=%x\n", ioc->name, mf_dma_addr, req_idx, |
| 973 |
ioc->RequestNB[req_idx])); |
| 974 |
CHIPREG_WRITE32(&ioc->chip->RequestFifo, mf_dma_addr); |
| 975 |
} |
| 976 |
|
| 977 |
/** |
| 978 |
* mpt_put_msg_frame_hi_pri - Send a hi-pri protocol-specific MPT request frame |
| 979 |
* @cb_idx: Handle of registered MPT protocol driver |
| 980 |
* @ioc: Pointer to MPT adapter structure |
| 981 |
* @mf: Pointer to MPT request frame |
| 982 |
* |
| 983 |
* Send a protocol-specific MPT request frame to an IOC using |
| 984 |
* hi-priority request queue. |
| 985 |
* |
| 986 |
* This routine posts an MPT request frame to the request post FIFO of a |
| 987 |
* specific MPT adapter. |
| 988 |
**/ |
| 989 |
void |
| 990 |
mpt_put_msg_frame_hi_pri(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf) |
| 991 |
{ |
| 992 |
u32 mf_dma_addr; |
| 993 |
int req_offset; |
| 994 |
u16 req_idx; /* Request index */ |
| 995 |
|
| 996 |
/* ensure values are reset properly! */ |
| 997 |
mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx; |
| 998 |
req_offset = (u8 *)mf - (u8 *)ioc->req_frames; |
| 999 |
req_idx = req_offset / ioc->req_sz; |
| 1000 |
mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx); |
| 1001 |
mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0; |
| 1002 |
|
| 1003 |
DBG_DUMP_PUT_MSG_FRAME(ioc, (u32 *)mf); |
| 1004 |
|
| 1005 |
mf_dma_addr = (ioc->req_frames_low_dma + req_offset); |
| 1006 |
dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mf_dma_addr=%x req_idx=%d\n", |
| 1007 |
ioc->name, mf_dma_addr, req_idx)); |
| 1008 |
CHIPREG_WRITE32(&ioc->chip->RequestHiPriFifo, mf_dma_addr); |
| 1009 |
} |
| 1010 |
|
| 1011 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 1012 |
/** |
| 1013 |
* mpt_free_msg_frame - Place MPT request frame back on FreeQ. |
| 1014 |
* @ioc: Pointer to MPT adapter structure |
| 1015 |
* @mf: Pointer to MPT request frame |
| 1016 |
* |
| 1017 |
* This routine places a MPT request frame back on the MPT adapter's |
| 1018 |
* FreeQ. |
| 1019 |
*/ |
| 1020 |
void |
| 1021 |
mpt_free_msg_frame(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf) |
| 1022 |
{ |
| 1023 |
unsigned long flags; |
| 1024 |
|
| 1025 |
/* Put Request back on FreeQ! */ |
| 1026 |
spin_lock_irqsave(&ioc->FreeQlock, flags); |
| 1027 |
if (cpu_to_le32(mf->u.frame.linkage.arg1) == 0xdeadbeaf) |
| 1028 |
goto out; |
| 1029 |
/* signature to know if this mf is freed */ |
| 1030 |
mf->u.frame.linkage.arg1 = cpu_to_le32(0xdeadbeaf); |
| 1031 |
list_add(&mf->u.frame.linkage.list, &ioc->FreeQ); |
| 1032 |
#ifdef MFCNT |
| 1033 |
ioc->mfcnt--; |
| 1034 |
#endif |
| 1035 |
out: |
| 1036 |
spin_unlock_irqrestore(&ioc->FreeQlock, flags); |
| 1037 |
} |
| 1038 |
|
| 1039 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 1040 |
/** |
| 1041 |
* mpt_add_sge - Place a simple 32 bit SGE at address pAddr. |
| 1042 |
* @pAddr: virtual address for SGE |
| 1043 |
* @flagslength: SGE flags and data transfer length |
| 1044 |
* @dma_addr: Physical address |
| 1045 |
* |
| 1046 |
* This routine places a MPT request frame back on the MPT adapter's |
| 1047 |
* FreeQ. |
| 1048 |
*/ |
| 1049 |
static void |
| 1050 |
mpt_add_sge(void *pAddr, u32 flagslength, dma_addr_t dma_addr) |
| 1051 |
{ |
| 1052 |
SGESimple32_t *pSge = (SGESimple32_t *) pAddr; |
| 1053 |
pSge->FlagsLength = cpu_to_le32(flagslength); |
| 1054 |
pSge->Address = cpu_to_le32(dma_addr); |
| 1055 |
} |
| 1056 |
|
| 1057 |
/** |
| 1058 |
* mpt_add_sge_64bit - Place a simple 64 bit SGE at address pAddr. |
| 1059 |
* @pAddr: virtual address for SGE |
| 1060 |
* @flagslength: SGE flags and data transfer length |
| 1061 |
* @dma_addr: Physical address |
| 1062 |
* |
| 1063 |
* This routine places a MPT request frame back on the MPT adapter's |
| 1064 |
* FreeQ. |
| 1065 |
**/ |
| 1066 |
static void |
| 1067 |
mpt_add_sge_64bit(void *pAddr, u32 flagslength, dma_addr_t dma_addr) |
| 1068 |
{ |
| 1069 |
SGESimple64_t *pSge = (SGESimple64_t *) pAddr; |
| 1070 |
pSge->Address.Low = cpu_to_le32 |
| 1071 |
(lower_32_bits(dma_addr)); |
| 1072 |
pSge->Address.High = cpu_to_le32 |
| 1073 |
(upper_32_bits(dma_addr)); |
| 1074 |
pSge->FlagsLength = cpu_to_le32 |
| 1075 |
((flagslength | MPT_SGE_FLAGS_64_BIT_ADDRESSING)); |
| 1076 |
} |
| 1077 |
|
| 1078 |
/** |
| 1079 |
* mpt_add_sge_64bit_1078 - Place a simple 64 bit SGE at address pAddr (1078 workaround). |
| 1080 |
* @pAddr: virtual address for SGE |
| 1081 |
* @flagslength: SGE flags and data transfer length |
| 1082 |
* @dma_addr: Physical address |
| 1083 |
* |
| 1084 |
* This routine places a MPT request frame back on the MPT adapter's |
| 1085 |
* FreeQ. |
| 1086 |
**/ |
| 1087 |
static void |
| 1088 |
mpt_add_sge_64bit_1078(void *pAddr, u32 flagslength, dma_addr_t dma_addr) |
| 1089 |
{ |
| 1090 |
SGESimple64_t *pSge = (SGESimple64_t *) pAddr; |
| 1091 |
u32 tmp; |
| 1092 |
|
| 1093 |
pSge->Address.Low = cpu_to_le32 |
| 1094 |
(lower_32_bits(dma_addr)); |
| 1095 |
tmp = (u32)(upper_32_bits(dma_addr)); |
| 1096 |
|
| 1097 |
/* |
| 1098 |
* 1078 errata workaround for the 36GB limitation |
| 1099 |
*/ |
| 1100 |
if ((((u64)dma_addr + MPI_SGE_LENGTH(flagslength)) >> 32) == 9) { |
| 1101 |
flagslength |= |
| 1102 |
MPI_SGE_SET_FLAGS(MPI_SGE_FLAGS_LOCAL_ADDRESS); |
| 1103 |
tmp |= (1<<31); |
| 1104 |
if (mpt_debug_level & MPT_DEBUG_36GB_MEM) |
| 1105 |
printk(KERN_DEBUG "1078 P0M2 addressing for " |
| 1106 |
"addr = 0x%llx len = %d\n", |
| 1107 |
(unsigned long long)dma_addr, |
| 1108 |
MPI_SGE_LENGTH(flagslength)); |
| 1109 |
} |
| 1110 |
|
| 1111 |
pSge->Address.High = cpu_to_le32(tmp); |
| 1112 |
pSge->FlagsLength = cpu_to_le32( |
| 1113 |
(flagslength | MPT_SGE_FLAGS_64_BIT_ADDRESSING)); |
| 1114 |
} |
| 1115 |
|
| 1116 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 1117 |
/** |
| 1118 |
* mpt_add_chain - Place a 32 bit chain SGE at address pAddr. |
| 1119 |
* @pAddr: virtual address for SGE |
| 1120 |
* @next: nextChainOffset value (u32's) |
| 1121 |
* @length: length of next SGL segment |
| 1122 |
* @dma_addr: Physical address |
| 1123 |
* |
| 1124 |
*/ |
| 1125 |
static void |
| 1126 |
mpt_add_chain(void *pAddr, u8 next, u16 length, dma_addr_t dma_addr) |
| 1127 |
{ |
| 1128 |
SGEChain32_t *pChain = (SGEChain32_t *) pAddr; |
| 1129 |
|
| 1130 |
pChain->Length = cpu_to_le16(length); |
| 1131 |
pChain->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT; |
| 1132 |
pChain->NextChainOffset = next; |
| 1133 |
pChain->Address = cpu_to_le32(dma_addr); |
| 1134 |
} |
| 1135 |
|
| 1136 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 1137 |
/** |
| 1138 |
* mpt_add_chain_64bit - Place a 64 bit chain SGE at address pAddr. |
| 1139 |
* @pAddr: virtual address for SGE |
| 1140 |
* @next: nextChainOffset value (u32's) |
| 1141 |
* @length: length of next SGL segment |
| 1142 |
* @dma_addr: Physical address |
| 1143 |
* |
| 1144 |
*/ |
| 1145 |
static void |
| 1146 |
mpt_add_chain_64bit(void *pAddr, u8 next, u16 length, dma_addr_t dma_addr) |
| 1147 |
{ |
| 1148 |
SGEChain64_t *pChain = (SGEChain64_t *) pAddr; |
| 1149 |
u32 tmp = dma_addr & 0xFFFFFFFF; |
| 1150 |
|
| 1151 |
pChain->Length = cpu_to_le16(length); |
| 1152 |
pChain->Flags = (MPI_SGE_FLAGS_CHAIN_ELEMENT | |
| 1153 |
MPI_SGE_FLAGS_64_BIT_ADDRESSING); |
| 1154 |
|
| 1155 |
pChain->NextChainOffset = next; |
| 1156 |
|
| 1157 |
pChain->Address.Low = cpu_to_le32(tmp); |
| 1158 |
tmp = (u32)(upper_32_bits(dma_addr)); |
| 1159 |
pChain->Address.High = cpu_to_le32(tmp); |
| 1160 |
} |
| 1161 |
|
| 1162 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 1163 |
/** |
| 1164 |
* mpt_send_handshake_request - Send MPT request via doorbell handshake method. |
| 1165 |
* @cb_idx: Handle of registered MPT protocol driver |
| 1166 |
* @ioc: Pointer to MPT adapter structure |
| 1167 |
* @reqBytes: Size of the request in bytes |
| 1168 |
* @req: Pointer to MPT request frame |
| 1169 |
* @sleepFlag: Use schedule if CAN_SLEEP else use udelay. |
| 1170 |
* |
| 1171 |
* This routine is used exclusively to send MptScsiTaskMgmt |
| 1172 |
* requests since they are required to be sent via doorbell handshake. |
| 1173 |
* |
| 1174 |
* NOTE: It is the callers responsibility to byte-swap fields in the |
| 1175 |
* request which are greater than 1 byte in size. |
| 1176 |
* |
| 1177 |
* Returns 0 for success, non-zero for failure. |
| 1178 |
*/ |
| 1179 |
int |
| 1180 |
mpt_send_handshake_request(u8 cb_idx, MPT_ADAPTER *ioc, int reqBytes, u32 *req, int sleepFlag) |
| 1181 |
{ |
| 1182 |
int r = 0; |
| 1183 |
u8 *req_as_bytes; |
| 1184 |
int ii; |
| 1185 |
|
| 1186 |
/* State is known to be good upon entering |
| 1187 |
* this function so issue the bus reset |
| 1188 |
* request. |
| 1189 |
*/ |
| 1190 |
|
| 1191 |
/* |
| 1192 |
* Emulate what mpt_put_msg_frame() does /wrt to sanity |
| 1193 |
* setting cb_idx/req_idx. But ONLY if this request |
| 1194 |
* is in proper (pre-alloc'd) request buffer range... |
| 1195 |
*/ |
| 1196 |
ii = MFPTR_2_MPT_INDEX(ioc,(MPT_FRAME_HDR*)req); |
| 1197 |
if (reqBytes >= 12 && ii >= 0 && ii < ioc->req_depth) { |
| 1198 |
MPT_FRAME_HDR *mf = (MPT_FRAME_HDR*)req; |
| 1199 |
mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(ii); |
| 1200 |
mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx; |
| 1201 |
} |
| 1202 |
|
| 1203 |
/* Make sure there are no doorbells */ |
| 1204 |
CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); |
| 1205 |
|
| 1206 |
CHIPREG_WRITE32(&ioc->chip->Doorbell, |
| 1207 |
((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) | |
| 1208 |
((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT))); |
| 1209 |
|
| 1210 |
/* Wait for IOC doorbell int */ |
| 1211 |
if ((ii = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) { |
| 1212 |
return ii; |
| 1213 |
} |
| 1214 |
|
| 1215 |
/* Read doorbell and check for active bit */ |
| 1216 |
if (!(CHIPREG_READ32(&ioc->chip->Doorbell) & MPI_DOORBELL_ACTIVE)) |
| 1217 |
return -5; |
| 1218 |
|
| 1219 |
dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_send_handshake_request start, WaitCnt=%d\n", |
| 1220 |
ioc->name, ii)); |
| 1221 |
|
| 1222 |
CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); |
| 1223 |
|
| 1224 |
if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) { |
| 1225 |
return -2; |
| 1226 |
} |
| 1227 |
|
| 1228 |
/* Send request via doorbell handshake */ |
| 1229 |
req_as_bytes = (u8 *) req; |
| 1230 |
for (ii = 0; ii < reqBytes/4; ii++) { |
| 1231 |
u32 word; |
| 1232 |
|
| 1233 |
word = ((req_as_bytes[(ii*4) + 0] << 0) | |
| 1234 |
(req_as_bytes[(ii*4) + 1] << 8) | |
| 1235 |
(req_as_bytes[(ii*4) + 2] << 16) | |
| 1236 |
(req_as_bytes[(ii*4) + 3] << 24)); |
| 1237 |
CHIPREG_WRITE32(&ioc->chip->Doorbell, word); |
| 1238 |
if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) { |
| 1239 |
r = -3; |
| 1240 |
break; |
| 1241 |
} |
| 1242 |
} |
| 1243 |
|
| 1244 |
if (r >= 0 && WaitForDoorbellInt(ioc, 10, sleepFlag) >= 0) |
| 1245 |
r = 0; |
| 1246 |
else |
| 1247 |
r = -4; |
| 1248 |
|
| 1249 |
/* Make sure there are no doorbells */ |
| 1250 |
CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); |
| 1251 |
|
| 1252 |
return r; |
| 1253 |
} |
| 1254 |
|
| 1255 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 1256 |
/** |
| 1257 |
* mpt_host_page_access_control - control the IOC's Host Page Buffer access |
| 1258 |
* @ioc: Pointer to MPT adapter structure |
| 1259 |
* @access_control_value: define bits below |
| 1260 |
* @sleepFlag: Specifies whether the process can sleep |
| 1261 |
* |
| 1262 |
* Provides mechanism for the host driver to control the IOC's |
| 1263 |
* Host Page Buffer access. |
| 1264 |
* |
| 1265 |
* Access Control Value - bits[15:12] |
| 1266 |
* 0h Reserved |
| 1267 |
* 1h Enable Access { MPI_DB_HPBAC_ENABLE_ACCESS } |
| 1268 |
* 2h Disable Access { MPI_DB_HPBAC_DISABLE_ACCESS } |
| 1269 |
* 3h Free Buffer { MPI_DB_HPBAC_FREE_BUFFER } |
| 1270 |
* |
| 1271 |
* Returns 0 for success, non-zero for failure. |
| 1272 |
*/ |
| 1273 |
|
| 1274 |
static int |
| 1275 |
mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag) |
| 1276 |
{ |
| 1277 |
/* return if in use */ |
| 1278 |
if (CHIPREG_READ32(&ioc->chip->Doorbell) |
| 1279 |
& MPI_DOORBELL_ACTIVE) |
| 1280 |
return -1; |
| 1281 |
|
| 1282 |
CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); |
| 1283 |
|
| 1284 |
CHIPREG_WRITE32(&ioc->chip->Doorbell, |
| 1285 |
((MPI_FUNCTION_HOST_PAGEBUF_ACCESS_CONTROL |
| 1286 |
<<MPI_DOORBELL_FUNCTION_SHIFT) | |
| 1287 |
(access_control_value<<12))); |
| 1288 |
|
| 1289 |
/* Wait for IOC to clear Doorbell Status bit */ |
| 1290 |
if (WaitForDoorbellAck(ioc, 5, sleepFlag) < 0) |
| 1291 |
return -2; |
| 1292 |
else |
| 1293 |
return 0; |
| 1294 |
} |
| 1295 |
|
| 1296 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 1297 |
/** |
| 1298 |
* mpt_host_page_alloc - allocate system memory for the fw |
| 1299 |
* @ioc: Pointer to pointer to IOC adapter |
| 1300 |
* @ioc_init: Pointer to ioc init config page |
| 1301 |
* |
| 1302 |
* If we already allocated memory in past, then resend the same pointer. |
| 1303 |
* Returns 0 for success, non-zero for failure. |
| 1304 |
*/ |
| 1305 |
static int |
| 1306 |
mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init) |
| 1307 |
{ |
| 1308 |
char *psge; |
| 1309 |
int flags_length; |
| 1310 |
u32 host_page_buffer_sz=0; |
| 1311 |
|
| 1312 |
if(!ioc->HostPageBuffer) { |
| 1313 |
|
| 1314 |
host_page_buffer_sz = |
| 1315 |
le32_to_cpu(ioc->facts.HostPageBufferSGE.FlagsLength) & 0xFFFFFF; |
| 1316 |
|
| 1317 |
if(!host_page_buffer_sz) |
| 1318 |
return 0; /* fw doesn't need any host buffers */ |
| 1319 |
|
| 1320 |
/* spin till we get enough memory */ |
| 1321 |
while (host_page_buffer_sz > 0) { |
| 1322 |
ioc->HostPageBuffer = |
| 1323 |
dma_alloc_coherent(&ioc->pcidev->dev, |
| 1324 |
host_page_buffer_sz, |
| 1325 |
&ioc->HostPageBuffer_dma, |
| 1326 |
GFP_KERNEL); |
| 1327 |
if (ioc->HostPageBuffer) { |
| 1328 |
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 1329 |
"host_page_buffer @ %p, dma @ %x, sz=%d bytes\n", |
| 1330 |
ioc->name, ioc->HostPageBuffer, |
| 1331 |
(u32)ioc->HostPageBuffer_dma, |
| 1332 |
host_page_buffer_sz)); |
| 1333 |
ioc->alloc_total += host_page_buffer_sz; |
| 1334 |
ioc->HostPageBuffer_sz = host_page_buffer_sz; |
| 1335 |
break; |
| 1336 |
} |
| 1337 |
|
| 1338 |
host_page_buffer_sz -= (4*1024); |
| 1339 |
} |
| 1340 |
} |
| 1341 |
|
| 1342 |
if(!ioc->HostPageBuffer) { |
| 1343 |
printk(MYIOC_s_ERR_FMT |
| 1344 |
"Failed to alloc memory for host_page_buffer!\n", |
| 1345 |
ioc->name); |
| 1346 |
return -999; |
| 1347 |
} |
| 1348 |
|
| 1349 |
psge = (char *)&ioc_init->HostPageBufferSGE; |
| 1350 |
flags_length = MPI_SGE_FLAGS_SIMPLE_ELEMENT | |
| 1351 |
MPI_SGE_FLAGS_SYSTEM_ADDRESS | |
| 1352 |
MPI_SGE_FLAGS_HOST_TO_IOC | |
| 1353 |
MPI_SGE_FLAGS_END_OF_BUFFER; |
| 1354 |
flags_length = flags_length << MPI_SGE_FLAGS_SHIFT; |
| 1355 |
flags_length |= ioc->HostPageBuffer_sz; |
| 1356 |
ioc->add_sge(psge, flags_length, ioc->HostPageBuffer_dma); |
| 1357 |
ioc->facts.HostPageBufferSGE = ioc_init->HostPageBufferSGE; |
| 1358 |
|
| 1359 |
return 0; |
| 1360 |
} |
| 1361 |
|
| 1362 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 1363 |
/** |
| 1364 |
* mpt_verify_adapter - Given IOC identifier, set pointer to its adapter structure. |
| 1365 |
* @iocid: IOC unique identifier (integer) |
| 1366 |
* @iocpp: Pointer to pointer to IOC adapter |
| 1367 |
* |
| 1368 |
* Given a unique IOC identifier, set pointer to the associated MPT |
| 1369 |
* adapter structure. |
| 1370 |
* |
| 1371 |
* Returns iocid and sets iocpp if iocid is found. |
| 1372 |
* Returns -1 if iocid is not found. |
| 1373 |
*/ |
| 1374 |
int |
| 1375 |
mpt_verify_adapter(int iocid, MPT_ADAPTER **iocpp) |
| 1376 |
{ |
| 1377 |
MPT_ADAPTER *ioc; |
| 1378 |
|
| 1379 |
list_for_each_entry(ioc,&ioc_list,list) { |
| 1380 |
if (ioc->id == iocid) { |
| 1381 |
*iocpp =ioc; |
| 1382 |
return iocid; |
| 1383 |
} |
| 1384 |
} |
| 1385 |
|
| 1386 |
*iocpp = NULL; |
| 1387 |
return -1; |
| 1388 |
} |
| 1389 |
|
| 1390 |
/** |
| 1391 |
* mpt_get_product_name - returns product string |
| 1392 |
* @vendor: pci vendor id |
| 1393 |
* @device: pci device id |
| 1394 |
* @revision: pci revision id |
| 1395 |
* |
| 1396 |
* Returns product string displayed when driver loads, |
| 1397 |
* in /proc/mpt/summary and /sysfs/class/scsi_host/host<X>/version_product |
| 1398 |
* |
| 1399 |
**/ |
| 1400 |
static const char* |
| 1401 |
mpt_get_product_name(u16 vendor, u16 device, u8 revision) |
| 1402 |
{ |
| 1403 |
char *product_str = NULL; |
| 1404 |
|
| 1405 |
if (vendor == PCI_VENDOR_ID_BROCADE) { |
| 1406 |
switch (device) |
| 1407 |
{ |
| 1408 |
case MPI_MANUFACTPAGE_DEVICEID_FC949E: |
| 1409 |
switch (revision) |
| 1410 |
{ |
| 1411 |
case 0x00: |
| 1412 |
product_str = "BRE040 A0"; |
| 1413 |
break; |
| 1414 |
case 0x01: |
| 1415 |
product_str = "BRE040 A1"; |
| 1416 |
break; |
| 1417 |
default: |
| 1418 |
product_str = "BRE040"; |
| 1419 |
break; |
| 1420 |
} |
| 1421 |
break; |
| 1422 |
} |
| 1423 |
goto out; |
| 1424 |
} |
| 1425 |
|
| 1426 |
switch (device) |
| 1427 |
{ |
| 1428 |
case MPI_MANUFACTPAGE_DEVICEID_FC909: |
| 1429 |
product_str = "LSIFC909 B1"; |
| 1430 |
break; |
| 1431 |
case MPI_MANUFACTPAGE_DEVICEID_FC919: |
| 1432 |
product_str = "LSIFC919 B0"; |
| 1433 |
break; |
| 1434 |
case MPI_MANUFACTPAGE_DEVICEID_FC929: |
| 1435 |
product_str = "LSIFC929 B0"; |
| 1436 |
break; |
| 1437 |
case MPI_MANUFACTPAGE_DEVICEID_FC919X: |
| 1438 |
if (revision < 0x80) |
| 1439 |
product_str = "LSIFC919X A0"; |
| 1440 |
else |
| 1441 |
product_str = "LSIFC919XL A1"; |
| 1442 |
break; |
| 1443 |
case MPI_MANUFACTPAGE_DEVICEID_FC929X: |
| 1444 |
if (revision < 0x80) |
| 1445 |
product_str = "LSIFC929X A0"; |
| 1446 |
else |
| 1447 |
product_str = "LSIFC929XL A1"; |
| 1448 |
break; |
| 1449 |
case MPI_MANUFACTPAGE_DEVICEID_FC939X: |
| 1450 |
product_str = "LSIFC939X A1"; |
| 1451 |
break; |
| 1452 |
case MPI_MANUFACTPAGE_DEVICEID_FC949X: |
| 1453 |
product_str = "LSIFC949X A1"; |
| 1454 |
break; |
| 1455 |
case MPI_MANUFACTPAGE_DEVICEID_FC949E: |
| 1456 |
switch (revision) |
| 1457 |
{ |
| 1458 |
case 0x00: |
| 1459 |
product_str = "LSIFC949E A0"; |
| 1460 |
break; |
| 1461 |
case 0x01: |
| 1462 |
product_str = "LSIFC949E A1"; |
| 1463 |
break; |
| 1464 |
default: |
| 1465 |
product_str = "LSIFC949E"; |
| 1466 |
break; |
| 1467 |
} |
| 1468 |
break; |
| 1469 |
case MPI_MANUFACTPAGE_DEVID_53C1030: |
| 1470 |
switch (revision) |
| 1471 |
{ |
| 1472 |
case 0x00: |
| 1473 |
product_str = "LSI53C1030 A0"; |
| 1474 |
break; |
| 1475 |
case 0x01: |
| 1476 |
product_str = "LSI53C1030 B0"; |
| 1477 |
break; |
| 1478 |
case 0x03: |
| 1479 |
product_str = "LSI53C1030 B1"; |
| 1480 |
break; |
| 1481 |
case 0x07: |
| 1482 |
product_str = "LSI53C1030 B2"; |
| 1483 |
break; |
| 1484 |
case 0x08: |
| 1485 |
product_str = "LSI53C1030 C0"; |
| 1486 |
break; |
| 1487 |
case 0x80: |
| 1488 |
product_str = "LSI53C1030T A0"; |
| 1489 |
break; |
| 1490 |
case 0x83: |
| 1491 |
product_str = "LSI53C1030T A2"; |
| 1492 |
break; |
| 1493 |
case 0x87: |
| 1494 |
product_str = "LSI53C1030T A3"; |
| 1495 |
break; |
| 1496 |
case 0xc1: |
| 1497 |
product_str = "LSI53C1020A A1"; |
| 1498 |
break; |
| 1499 |
default: |
| 1500 |
product_str = "LSI53C1030"; |
| 1501 |
break; |
| 1502 |
} |
| 1503 |
break; |
| 1504 |
case MPI_MANUFACTPAGE_DEVID_1030_53C1035: |
| 1505 |
switch (revision) |
| 1506 |
{ |
| 1507 |
case 0x03: |
| 1508 |
product_str = "LSI53C1035 A2"; |
| 1509 |
break; |
| 1510 |
case 0x04: |
| 1511 |
product_str = "LSI53C1035 B0"; |
| 1512 |
break; |
| 1513 |
default: |
| 1514 |
product_str = "LSI53C1035"; |
| 1515 |
break; |
| 1516 |
} |
| 1517 |
break; |
| 1518 |
case MPI_MANUFACTPAGE_DEVID_SAS1064: |
| 1519 |
switch (revision) |
| 1520 |
{ |
| 1521 |
case 0x00: |
| 1522 |
product_str = "LSISAS1064 A1"; |
| 1523 |
break; |
| 1524 |
case 0x01: |
| 1525 |
product_str = "LSISAS1064 A2"; |
| 1526 |
break; |
| 1527 |
case 0x02: |
| 1528 |
product_str = "LSISAS1064 A3"; |
| 1529 |
break; |
| 1530 |
case 0x03: |
| 1531 |
product_str = "LSISAS1064 A4"; |
| 1532 |
break; |
| 1533 |
default: |
| 1534 |
product_str = "LSISAS1064"; |
| 1535 |
break; |
| 1536 |
} |
| 1537 |
break; |
| 1538 |
case MPI_MANUFACTPAGE_DEVID_SAS1064E: |
| 1539 |
switch (revision) |
| 1540 |
{ |
| 1541 |
case 0x00: |
| 1542 |
product_str = "LSISAS1064E A0"; |
| 1543 |
break; |
| 1544 |
case 0x01: |
| 1545 |
product_str = "LSISAS1064E B0"; |
| 1546 |
break; |
| 1547 |
case 0x02: |
| 1548 |
product_str = "LSISAS1064E B1"; |
| 1549 |
break; |
| 1550 |
case 0x04: |
| 1551 |
product_str = "LSISAS1064E B2"; |
| 1552 |
break; |
| 1553 |
case 0x08: |
| 1554 |
product_str = "LSISAS1064E B3"; |
| 1555 |
break; |
| 1556 |
default: |
| 1557 |
product_str = "LSISAS1064E"; |
| 1558 |
break; |
| 1559 |
} |
| 1560 |
break; |
| 1561 |
case MPI_MANUFACTPAGE_DEVID_SAS1068: |
| 1562 |
switch (revision) |
| 1563 |
{ |
| 1564 |
case 0x00: |
| 1565 |
product_str = "LSISAS1068 A0"; |
| 1566 |
break; |
| 1567 |
case 0x01: |
| 1568 |
product_str = "LSISAS1068 B0"; |
| 1569 |
break; |
| 1570 |
case 0x02: |
| 1571 |
product_str = "LSISAS1068 B1"; |
| 1572 |
break; |
| 1573 |
default: |
| 1574 |
product_str = "LSISAS1068"; |
| 1575 |
break; |
| 1576 |
} |
| 1577 |
break; |
| 1578 |
case MPI_MANUFACTPAGE_DEVID_SAS1068E: |
| 1579 |
switch (revision) |
| 1580 |
{ |
| 1581 |
case 0x00: |
| 1582 |
product_str = "LSISAS1068E A0"; |
| 1583 |
break; |
| 1584 |
case 0x01: |
| 1585 |
product_str = "LSISAS1068E B0"; |
| 1586 |
break; |
| 1587 |
case 0x02: |
| 1588 |
product_str = "LSISAS1068E B1"; |
| 1589 |
break; |
| 1590 |
case 0x04: |
| 1591 |
product_str = "LSISAS1068E B2"; |
| 1592 |
break; |
| 1593 |
case 0x08: |
| 1594 |
product_str = "LSISAS1068E B3"; |
| 1595 |
break; |
| 1596 |
default: |
| 1597 |
product_str = "LSISAS1068E"; |
| 1598 |
break; |
| 1599 |
} |
| 1600 |
break; |
| 1601 |
case MPI_MANUFACTPAGE_DEVID_SAS1078: |
| 1602 |
switch (revision) |
| 1603 |
{ |
| 1604 |
case 0x00: |
| 1605 |
product_str = "LSISAS1078 A0"; |
| 1606 |
break; |
| 1607 |
case 0x01: |
| 1608 |
product_str = "LSISAS1078 B0"; |
| 1609 |
break; |
| 1610 |
case 0x02: |
| 1611 |
product_str = "LSISAS1078 C0"; |
| 1612 |
break; |
| 1613 |
case 0x03: |
| 1614 |
product_str = "LSISAS1078 C1"; |
| 1615 |
break; |
| 1616 |
case 0x04: |
| 1617 |
product_str = "LSISAS1078 C2"; |
| 1618 |
break; |
| 1619 |
default: |
| 1620 |
product_str = "LSISAS1078"; |
| 1621 |
break; |
| 1622 |
} |
| 1623 |
break; |
| 1624 |
} |
| 1625 |
|
| 1626 |
out: |
| 1627 |
return product_str; |
| 1628 |
} |
| 1629 |
|
| 1630 |
/** |
| 1631 |
* mpt_mapresources - map in memory mapped io |
| 1632 |
* @ioc: Pointer to pointer to IOC adapter |
| 1633 |
* |
| 1634 |
**/ |
| 1635 |
static int |
| 1636 |
mpt_mapresources(MPT_ADAPTER *ioc) |
| 1637 |
{ |
| 1638 |
u8 __iomem *mem; |
| 1639 |
int ii; |
| 1640 |
resource_size_t mem_phys; |
| 1641 |
unsigned long port; |
| 1642 |
u32 msize; |
| 1643 |
u32 psize; |
| 1644 |
int r = -ENODEV; |
| 1645 |
struct pci_dev *pdev; |
| 1646 |
|
| 1647 |
pdev = ioc->pcidev; |
| 1648 |
ioc->bars = pci_select_bars(pdev, IORESOURCE_MEM); |
| 1649 |
if (pci_enable_device_mem(pdev)) { |
| 1650 |
printk(MYIOC_s_ERR_FMT "pci_enable_device_mem() " |
| 1651 |
"failed\n", ioc->name); |
| 1652 |
return r; |
| 1653 |
} |
| 1654 |
if (pci_request_selected_regions(pdev, ioc->bars, "mpt")) { |
| 1655 |
printk(MYIOC_s_ERR_FMT "pci_request_selected_regions() with " |
| 1656 |
"MEM failed\n", ioc->name); |
| 1657 |
goto out_pci_disable_device; |
| 1658 |
} |
| 1659 |
|
| 1660 |
if (sizeof(dma_addr_t) > 4) { |
| 1661 |
const uint64_t required_mask = dma_get_required_mask |
| 1662 |
(&pdev->dev); |
| 1663 |
if (required_mask > DMA_BIT_MASK(32) |
| 1664 |
&& !dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)) |
| 1665 |
&& !dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64))) { |
| 1666 |
ioc->dma_mask = DMA_BIT_MASK(64); |
| 1667 |
dinitprintk(ioc, printk(MYIOC_s_INFO_FMT |
| 1668 |
": 64 BIT PCI BUS DMA ADDRESSING SUPPORTED\n", |
| 1669 |
ioc->name)); |
| 1670 |
} else if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)) |
| 1671 |
&& !dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32))) { |
| 1672 |
ioc->dma_mask = DMA_BIT_MASK(32); |
| 1673 |
dinitprintk(ioc, printk(MYIOC_s_INFO_FMT |
| 1674 |
": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n", |
| 1675 |
ioc->name)); |
| 1676 |
} else { |
| 1677 |
printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n", |
| 1678 |
ioc->name, pci_name(pdev)); |
| 1679 |
goto out_pci_release_region; |
| 1680 |
} |
| 1681 |
} else { |
| 1682 |
if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)) |
| 1683 |
&& !dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32))) { |
| 1684 |
ioc->dma_mask = DMA_BIT_MASK(32); |
| 1685 |
dinitprintk(ioc, printk(MYIOC_s_INFO_FMT |
| 1686 |
": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n", |
| 1687 |
ioc->name)); |
| 1688 |
} else { |
| 1689 |
printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n", |
| 1690 |
ioc->name, pci_name(pdev)); |
| 1691 |
goto out_pci_release_region; |
| 1692 |
} |
| 1693 |
} |
| 1694 |
|
| 1695 |
mem_phys = msize = 0; |
| 1696 |
port = psize = 0; |
| 1697 |
for (ii = 0; ii < DEVICE_COUNT_RESOURCE; ii++) { |
| 1698 |
if (pci_resource_flags(pdev, ii) & PCI_BASE_ADDRESS_SPACE_IO) { |
| 1699 |
if (psize) |
| 1700 |
continue; |
| 1701 |
/* Get I/O space! */ |
| 1702 |
port = pci_resource_start(pdev, ii); |
| 1703 |
psize = pci_resource_len(pdev, ii); |
| 1704 |
} else { |
| 1705 |
if (msize) |
| 1706 |
continue; |
| 1707 |
/* Get memmap */ |
| 1708 |
mem_phys = pci_resource_start(pdev, ii); |
| 1709 |
msize = pci_resource_len(pdev, ii); |
| 1710 |
} |
| 1711 |
} |
| 1712 |
ioc->mem_size = msize; |
| 1713 |
|
| 1714 |
mem = NULL; |
| 1715 |
/* Get logical ptr for PciMem0 space */ |
| 1716 |
/*mem = ioremap(mem_phys, msize);*/ |
| 1717 |
mem = ioremap(mem_phys, msize); |
| 1718 |
if (mem == NULL) { |
| 1719 |
printk(MYIOC_s_ERR_FMT ": ERROR - Unable to map adapter" |
| 1720 |
" memory!\n", ioc->name); |
| 1721 |
r = -EINVAL; |
| 1722 |
goto out_pci_release_region; |
| 1723 |
} |
| 1724 |
ioc->memmap = mem; |
| 1725 |
dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "mem = %p, mem_phys = %llx\n", |
| 1726 |
ioc->name, mem, (unsigned long long)mem_phys)); |
| 1727 |
|
| 1728 |
ioc->mem_phys = mem_phys; |
| 1729 |
ioc->chip = (SYSIF_REGS __iomem *)mem; |
| 1730 |
|
| 1731 |
/* Save Port IO values in case we need to do downloadboot */ |
| 1732 |
ioc->pio_mem_phys = port; |
| 1733 |
ioc->pio_chip = (SYSIF_REGS __iomem *)port; |
| 1734 |
|
| 1735 |
return 0; |
| 1736 |
|
| 1737 |
out_pci_release_region: |
| 1738 |
pci_release_selected_regions(pdev, ioc->bars); |
| 1739 |
out_pci_disable_device: |
| 1740 |
pci_disable_device(pdev); |
| 1741 |
return r; |
| 1742 |
} |
| 1743 |
|
| 1744 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 1745 |
/** |
| 1746 |
* mpt_attach - Install a PCI intelligent MPT adapter. |
| 1747 |
* @pdev: Pointer to pci_dev structure |
| 1748 |
* @id: PCI device ID information |
| 1749 |
* |
| 1750 |
* This routine performs all the steps necessary to bring the IOC of |
| 1751 |
* a MPT adapter to a OPERATIONAL state. This includes registering |
| 1752 |
* memory regions, registering the interrupt, and allocating request |
| 1753 |
* and reply memory pools. |
| 1754 |
* |
| 1755 |
* This routine also pre-fetches the LAN MAC address of a Fibre Channel |
| 1756 |
* MPT adapter. |
| 1757 |
* |
| 1758 |
* Returns 0 for success, non-zero for failure. |
| 1759 |
* |
| 1760 |
* TODO: Add support for polled controllers |
| 1761 |
*/ |
| 1762 |
int |
| 1763 |
mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id) |
| 1764 |
{ |
| 1765 |
MPT_ADAPTER *ioc; |
| 1766 |
u8 cb_idx; |
| 1767 |
int r = -ENODEV; |
| 1768 |
u8 pcixcmd; |
| 1769 |
static int mpt_ids = 0; |
| 1770 |
#ifdef CONFIG_PROC_FS |
| 1771 |
struct proc_dir_entry *dent; |
| 1772 |
#endif |
| 1773 |
|
| 1774 |
ioc = kzalloc_obj(MPT_ADAPTER); |
| 1775 |
if (ioc == NULL) { |
| 1776 |
printk(KERN_ERR MYNAM ": ERROR - Insufficient memory to add adapter!\n"); |
| 1777 |
return -ENOMEM; |
| 1778 |
} |
| 1779 |
|
| 1780 |
ioc->id = mpt_ids++; |
| 1781 |
sprintf(ioc->name, "ioc%d", ioc->id); |
| 1782 |
dinitprintk(ioc, printk(KERN_WARNING MYNAM ": mpt_adapter_install\n")); |
| 1783 |
|
| 1784 |
/* |
| 1785 |
* set initial debug level |
| 1786 |
* (refer to mptdebug.h) |
| 1787 |
* |
| 1788 |
*/ |
| 1789 |
ioc->debug_level = mpt_debug_level; |
| 1790 |
if (mpt_debug_level) |
| 1791 |
printk(KERN_INFO "mpt_debug_level=%xh\n", mpt_debug_level); |
| 1792 |
|
| 1793 |
dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": mpt_adapter_install\n", ioc->name)); |
| 1794 |
|
| 1795 |
ioc->pcidev = pdev; |
| 1796 |
if (mpt_mapresources(ioc)) { |
| 1797 |
goto out_free_ioc; |
| 1798 |
} |
| 1799 |
|
| 1800 |
/* |
| 1801 |
* Setting up proper handlers for scatter gather handling |
| 1802 |
*/ |
| 1803 |
if (ioc->dma_mask == DMA_BIT_MASK(64)) { |
| 1804 |
if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078) |
| 1805 |
ioc->add_sge = &mpt_add_sge_64bit_1078; |
| 1806 |
else |
| 1807 |
ioc->add_sge = &mpt_add_sge_64bit; |
| 1808 |
ioc->add_chain = &mpt_add_chain_64bit; |
| 1809 |
ioc->sg_addr_size = 8; |
| 1810 |
} else { |
| 1811 |
ioc->add_sge = &mpt_add_sge; |
| 1812 |
ioc->add_chain = &mpt_add_chain; |
| 1813 |
ioc->sg_addr_size = 4; |
| 1814 |
} |
| 1815 |
ioc->SGE_size = sizeof(u32) + ioc->sg_addr_size; |
| 1816 |
|
| 1817 |
ioc->alloc_total = sizeof(MPT_ADAPTER); |
| 1818 |
ioc->req_sz = MPT_DEFAULT_FRAME_SIZE; /* avoid div by zero! */ |
| 1819 |
ioc->reply_sz = MPT_REPLY_FRAME_SIZE; |
| 1820 |
|
| 1821 |
|
| 1822 |
spin_lock_init(&ioc->taskmgmt_lock); |
| 1823 |
mutex_init(&ioc->internal_cmds.mutex); |
| 1824 |
init_completion(&ioc->internal_cmds.done); |
| 1825 |
mutex_init(&ioc->mptbase_cmds.mutex); |
| 1826 |
init_completion(&ioc->mptbase_cmds.done); |
| 1827 |
mutex_init(&ioc->taskmgmt_cmds.mutex); |
| 1828 |
init_completion(&ioc->taskmgmt_cmds.done); |
| 1829 |
|
| 1830 |
/* Initialize the event logging. |
| 1831 |
*/ |
| 1832 |
ioc->eventTypes = 0; /* None */ |
| 1833 |
ioc->eventContext = 0; |
| 1834 |
ioc->eventLogSize = 0; |
| 1835 |
ioc->events = NULL; |
| 1836 |
|
| 1837 |
#ifdef MFCNT |
| 1838 |
ioc->mfcnt = 0; |
| 1839 |
#endif |
| 1840 |
|
| 1841 |
ioc->sh = NULL; |
| 1842 |
ioc->cached_fw = NULL; |
| 1843 |
|
| 1844 |
/* Initialize SCSI Config Data structure |
| 1845 |
*/ |
| 1846 |
memset(&ioc->spi_data, 0, sizeof(SpiCfgData)); |
| 1847 |
|
| 1848 |
/* Initialize the fc rport list head. |
| 1849 |
*/ |
| 1850 |
INIT_LIST_HEAD(&ioc->fc_rports); |
| 1851 |
|
| 1852 |
/* Find lookup slot. */ |
| 1853 |
INIT_LIST_HEAD(&ioc->list); |
| 1854 |
|
| 1855 |
|
| 1856 |
/* Initialize workqueue */ |
| 1857 |
INIT_DELAYED_WORK(&ioc->fault_reset_work, mpt_fault_reset_work); |
| 1858 |
|
| 1859 |
ioc->reset_work_q = |
| 1860 |
alloc_workqueue("mpt_poll_%d", WQ_MEM_RECLAIM | WQ_PERCPU, 0, |
| 1861 |
ioc->id); |
| 1862 |
if (!ioc->reset_work_q) { |
| 1863 |
printk(MYIOC_s_ERR_FMT "Insufficient memory to add adapter!\n", |
| 1864 |
ioc->name); |
| 1865 |
r = -ENOMEM; |
| 1866 |
goto out_unmap_resources; |
| 1867 |
} |
| 1868 |
|
| 1869 |
dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "facts @ %p, pfacts[0] @ %p\n", |
| 1870 |
ioc->name, &ioc->facts, &ioc->pfacts[0])); |
| 1871 |
|
| 1872 |
ioc->prod_name = mpt_get_product_name(pdev->vendor, pdev->device, |
| 1873 |
pdev->revision); |
| 1874 |
|
| 1875 |
switch (pdev->device) |
| 1876 |
{ |
| 1877 |
case MPI_MANUFACTPAGE_DEVICEID_FC939X: |
| 1878 |
case MPI_MANUFACTPAGE_DEVICEID_FC949X: |
| 1879 |
ioc->errata_flag_1064 = 1; |
| 1880 |
fallthrough; |
| 1881 |
case MPI_MANUFACTPAGE_DEVICEID_FC909: |
| 1882 |
case MPI_MANUFACTPAGE_DEVICEID_FC929: |
| 1883 |
case MPI_MANUFACTPAGE_DEVICEID_FC919: |
| 1884 |
case MPI_MANUFACTPAGE_DEVICEID_FC949E: |
| 1885 |
ioc->bus_type = FC; |
| 1886 |
break; |
| 1887 |
|
| 1888 |
case MPI_MANUFACTPAGE_DEVICEID_FC929X: |
| 1889 |
if (pdev->revision < XL_929) { |
| 1890 |
/* 929X Chip Fix. Set Split transactions level |
| 1891 |
* for PCIX. Set MOST bits to zero. |
| 1892 |
*/ |
| 1893 |
pci_read_config_byte(pdev, 0x6a, &pcixcmd); |
| 1894 |
pcixcmd &= 0x8F; |
| 1895 |
pci_write_config_byte(pdev, 0x6a, pcixcmd); |
| 1896 |
} else { |
| 1897 |
/* 929XL Chip Fix. Set MMRBC to 0x08. |
| 1898 |
*/ |
| 1899 |
pci_read_config_byte(pdev, 0x6a, &pcixcmd); |
| 1900 |
pcixcmd |= 0x08; |
| 1901 |
pci_write_config_byte(pdev, 0x6a, pcixcmd); |
| 1902 |
} |
| 1903 |
ioc->bus_type = FC; |
| 1904 |
break; |
| 1905 |
|
| 1906 |
case MPI_MANUFACTPAGE_DEVICEID_FC919X: |
| 1907 |
/* 919X Chip Fix. Set Split transactions level |
| 1908 |
* for PCIX. Set MOST bits to zero. |
| 1909 |
*/ |
| 1910 |
pci_read_config_byte(pdev, 0x6a, &pcixcmd); |
| 1911 |
pcixcmd &= 0x8F; |
| 1912 |
pci_write_config_byte(pdev, 0x6a, pcixcmd); |
| 1913 |
ioc->bus_type = FC; |
| 1914 |
break; |
| 1915 |
|
| 1916 |
case MPI_MANUFACTPAGE_DEVID_53C1030: |
| 1917 |
/* 1030 Chip Fix. Disable Split transactions |
| 1918 |
* for PCIX. Set MOST bits to zero if Rev < C0( = 8). |
| 1919 |
*/ |
| 1920 |
if (pdev->revision < C0_1030) { |
| 1921 |
pci_read_config_byte(pdev, 0x6a, &pcixcmd); |
| 1922 |
pcixcmd &= 0x8F; |
| 1923 |
pci_write_config_byte(pdev, 0x6a, pcixcmd); |
| 1924 |
} |
| 1925 |
fallthrough; |
| 1926 |
|
| 1927 |
case MPI_MANUFACTPAGE_DEVID_1030_53C1035: |
| 1928 |
ioc->bus_type = SPI; |
| 1929 |
break; |
| 1930 |
|
| 1931 |
case MPI_MANUFACTPAGE_DEVID_SAS1064: |
| 1932 |
case MPI_MANUFACTPAGE_DEVID_SAS1068: |
| 1933 |
ioc->errata_flag_1064 = 1; |
| 1934 |
ioc->bus_type = SAS; |
| 1935 |
break; |
| 1936 |
|
| 1937 |
case MPI_MANUFACTPAGE_DEVID_SAS1064E: |
| 1938 |
case MPI_MANUFACTPAGE_DEVID_SAS1068E: |
| 1939 |
case MPI_MANUFACTPAGE_DEVID_SAS1078: |
| 1940 |
ioc->bus_type = SAS; |
| 1941 |
break; |
| 1942 |
} |
| 1943 |
|
| 1944 |
|
| 1945 |
switch (ioc->bus_type) { |
| 1946 |
|
| 1947 |
case SAS: |
| 1948 |
ioc->msi_enable = mpt_msi_enable_sas; |
| 1949 |
break; |
| 1950 |
|
| 1951 |
case SPI: |
| 1952 |
ioc->msi_enable = mpt_msi_enable_spi; |
| 1953 |
break; |
| 1954 |
|
| 1955 |
case FC: |
| 1956 |
ioc->msi_enable = mpt_msi_enable_fc; |
| 1957 |
break; |
| 1958 |
|
| 1959 |
default: |
| 1960 |
ioc->msi_enable = 0; |
| 1961 |
break; |
| 1962 |
} |
| 1963 |
|
| 1964 |
ioc->fw_events_off = 1; |
| 1965 |
|
| 1966 |
if (ioc->errata_flag_1064) |
| 1967 |
pci_disable_io_access(pdev); |
| 1968 |
|
| 1969 |
spin_lock_init(&ioc->FreeQlock); |
| 1970 |
|
| 1971 |
/* Disable all! */ |
| 1972 |
CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF); |
| 1973 |
ioc->active = 0; |
| 1974 |
CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); |
| 1975 |
|
| 1976 |
/* Set IOC ptr in the pcidev's driver data. */ |
| 1977 |
pci_set_drvdata(ioc->pcidev, ioc); |
| 1978 |
|
| 1979 |
/* Set lookup ptr. */ |
| 1980 |
list_add_tail(&ioc->list, &ioc_list); |
| 1981 |
|
| 1982 |
/* Check for "bound ports" (929, 929X, 1030, 1035) to reduce redundant resets. |
| 1983 |
*/ |
| 1984 |
mpt_detect_bound_ports(ioc, pdev); |
| 1985 |
|
| 1986 |
INIT_LIST_HEAD(&ioc->fw_event_list); |
| 1987 |
spin_lock_init(&ioc->fw_event_lock); |
| 1988 |
ioc->fw_event_q = alloc_workqueue("mpt/%d", |
| 1989 |
WQ_MEM_RECLAIM | WQ_PERCPU, 0, |
| 1990 |
ioc->id); |
| 1991 |
if (!ioc->fw_event_q) { |
| 1992 |
printk(MYIOC_s_ERR_FMT "Insufficient memory to add adapter!\n", |
| 1993 |
ioc->name); |
| 1994 |
r = -ENOMEM; |
| 1995 |
goto out_remove_ioc; |
| 1996 |
} |
| 1997 |
|
| 1998 |
if ((r = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP, |
| 1999 |
CAN_SLEEP)) != 0){ |
| 2000 |
printk(MYIOC_s_ERR_FMT "didn't initialize properly! (%d)\n", |
| 2001 |
ioc->name, r); |
| 2002 |
|
| 2003 |
destroy_workqueue(ioc->fw_event_q); |
| 2004 |
ioc->fw_event_q = NULL; |
| 2005 |
|
| 2006 |
list_del(&ioc->list); |
| 2007 |
if (ioc->alt_ioc) |
| 2008 |
ioc->alt_ioc->alt_ioc = NULL; |
| 2009 |
iounmap(ioc->memmap); |
| 2010 |
if (pci_is_enabled(pdev)) |
| 2011 |
pci_disable_device(pdev); |
| 2012 |
if (r != -5) |
| 2013 |
pci_release_selected_regions(pdev, ioc->bars); |
| 2014 |
|
| 2015 |
destroy_workqueue(ioc->reset_work_q); |
| 2016 |
ioc->reset_work_q = NULL; |
| 2017 |
|
| 2018 |
kfree(ioc); |
| 2019 |
return r; |
| 2020 |
} |
| 2021 |
|
| 2022 |
/* call per device driver probe entry point */ |
| 2023 |
for(cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) { |
| 2024 |
if(MptDeviceDriverHandlers[cb_idx] && |
| 2025 |
MptDeviceDriverHandlers[cb_idx]->probe) { |
| 2026 |
MptDeviceDriverHandlers[cb_idx]->probe(pdev); |
| 2027 |
} |
| 2028 |
} |
| 2029 |
|
| 2030 |
#ifdef CONFIG_PROC_FS |
| 2031 |
/* |
| 2032 |
* Create "/proc/mpt/iocN" subdirectory entry for each MPT adapter. |
| 2033 |
*/ |
| 2034 |
dent = proc_mkdir(ioc->name, mpt_proc_root_dir); |
| 2035 |
if (dent) { |
| 2036 |
proc_create_single_data("info", S_IRUGO, dent, |
| 2037 |
mpt_iocinfo_proc_show, ioc); |
| 2038 |
proc_create_single_data("summary", S_IRUGO, dent, |
| 2039 |
mpt_summary_proc_show, ioc); |
| 2040 |
} |
| 2041 |
#endif |
| 2042 |
|
| 2043 |
if (!ioc->alt_ioc) |
| 2044 |
queue_delayed_work(ioc->reset_work_q, &ioc->fault_reset_work, |
| 2045 |
msecs_to_jiffies(MPT_POLLING_INTERVAL)); |
| 2046 |
|
| 2047 |
return 0; |
| 2048 |
|
| 2049 |
out_remove_ioc: |
| 2050 |
list_del(&ioc->list); |
| 2051 |
if (ioc->alt_ioc) |
| 2052 |
ioc->alt_ioc->alt_ioc = NULL; |
| 2053 |
|
| 2054 |
destroy_workqueue(ioc->reset_work_q); |
| 2055 |
ioc->reset_work_q = NULL; |
| 2056 |
|
| 2057 |
out_unmap_resources: |
| 2058 |
iounmap(ioc->memmap); |
| 2059 |
pci_disable_device(pdev); |
| 2060 |
pci_release_selected_regions(pdev, ioc->bars); |
| 2061 |
|
| 2062 |
out_free_ioc: |
| 2063 |
kfree(ioc); |
| 2064 |
|
| 2065 |
return r; |
| 2066 |
} |
| 2067 |
|
| 2068 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 2069 |
/** |
| 2070 |
* mpt_detach - Remove a PCI intelligent MPT adapter. |
| 2071 |
* @pdev: Pointer to pci_dev structure |
| 2072 |
*/ |
| 2073 |
|
| 2074 |
void |
| 2075 |
mpt_detach(struct pci_dev *pdev) |
| 2076 |
{ |
| 2077 |
MPT_ADAPTER *ioc = pci_get_drvdata(pdev); |
| 2078 |
char pname[64]; |
| 2079 |
u8 cb_idx; |
| 2080 |
unsigned long flags; |
| 2081 |
struct workqueue_struct *wq; |
| 2082 |
|
| 2083 |
/* |
| 2084 |
* Stop polling ioc for fault condition |
| 2085 |
*/ |
| 2086 |
spin_lock_irqsave(&ioc->taskmgmt_lock, flags); |
| 2087 |
wq = ioc->reset_work_q; |
| 2088 |
ioc->reset_work_q = NULL; |
| 2089 |
spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); |
| 2090 |
cancel_delayed_work(&ioc->fault_reset_work); |
| 2091 |
destroy_workqueue(wq); |
| 2092 |
|
| 2093 |
spin_lock_irqsave(&ioc->fw_event_lock, flags); |
| 2094 |
wq = ioc->fw_event_q; |
| 2095 |
ioc->fw_event_q = NULL; |
| 2096 |
spin_unlock_irqrestore(&ioc->fw_event_lock, flags); |
| 2097 |
destroy_workqueue(wq); |
| 2098 |
|
| 2099 |
snprintf(pname, sizeof(pname), MPT_PROCFS_MPTBASEDIR "/%s/summary", ioc->name); |
| 2100 |
remove_proc_entry(pname, NULL); |
| 2101 |
snprintf(pname, sizeof(pname), MPT_PROCFS_MPTBASEDIR "/%s/info", ioc->name); |
| 2102 |
remove_proc_entry(pname, NULL); |
| 2103 |
snprintf(pname, sizeof(pname), MPT_PROCFS_MPTBASEDIR "/%s", ioc->name); |
| 2104 |
remove_proc_entry(pname, NULL); |
| 2105 |
|
| 2106 |
/* call per device driver remove entry point */ |
| 2107 |
for(cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) { |
| 2108 |
if(MptDeviceDriverHandlers[cb_idx] && |
| 2109 |
MptDeviceDriverHandlers[cb_idx]->remove) { |
| 2110 |
MptDeviceDriverHandlers[cb_idx]->remove(pdev); |
| 2111 |
} |
| 2112 |
} |
| 2113 |
|
| 2114 |
/* Disable interrupts! */ |
| 2115 |
CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF); |
| 2116 |
|
| 2117 |
ioc->active = 0; |
| 2118 |
synchronize_irq(pdev->irq); |
| 2119 |
|
| 2120 |
/* Clear any lingering interrupt */ |
| 2121 |
CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); |
| 2122 |
|
| 2123 |
CHIPREG_READ32(&ioc->chip->IntStatus); |
| 2124 |
|
| 2125 |
mpt_adapter_dispose(ioc); |
| 2126 |
|
| 2127 |
} |
| 2128 |
|
| 2129 |
/************************************************************************** |
| 2130 |
* Power Management |
| 2131 |
*/ |
| 2132 |
#ifdef CONFIG_PM |
| 2133 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 2134 |
/** |
| 2135 |
* mpt_suspend - Fusion MPT base driver suspend routine. |
| 2136 |
* @pdev: Pointer to pci_dev structure |
| 2137 |
* @state: new state to enter |
| 2138 |
*/ |
| 2139 |
int |
| 2140 |
mpt_suspend(struct pci_dev *pdev, pm_message_t state) |
| 2141 |
{ |
| 2142 |
u32 device_state; |
| 2143 |
MPT_ADAPTER *ioc = pci_get_drvdata(pdev); |
| 2144 |
|
| 2145 |
device_state = pci_choose_state(pdev, state); |
| 2146 |
printk(MYIOC_s_INFO_FMT "pci-suspend: pdev=0x%p, slot=%s, Entering " |
| 2147 |
"operating state [D%d]\n", ioc->name, pdev, pci_name(pdev), |
| 2148 |
device_state); |
| 2149 |
|
| 2150 |
/* put ioc into READY_STATE */ |
| 2151 |
if (SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, CAN_SLEEP)) { |
| 2152 |
printk(MYIOC_s_ERR_FMT |
| 2153 |
"pci-suspend: IOC msg unit reset failed!\n", ioc->name); |
| 2154 |
} |
| 2155 |
|
| 2156 |
/* disable interrupts */ |
| 2157 |
CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF); |
| 2158 |
ioc->active = 0; |
| 2159 |
|
| 2160 |
/* Clear any lingering interrupt */ |
| 2161 |
CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); |
| 2162 |
|
| 2163 |
free_irq(ioc->pci_irq, ioc); |
| 2164 |
if (ioc->msi_enable) |
| 2165 |
pci_disable_msi(ioc->pcidev); |
| 2166 |
ioc->pci_irq = -1; |
| 2167 |
pci_save_state(pdev); |
| 2168 |
pci_disable_device(pdev); |
| 2169 |
pci_release_selected_regions(pdev, ioc->bars); |
| 2170 |
pci_set_power_state(pdev, device_state); |
| 2171 |
return 0; |
| 2172 |
} |
| 2173 |
|
| 2174 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 2175 |
/** |
| 2176 |
* mpt_resume - Fusion MPT base driver resume routine. |
| 2177 |
* @pdev: Pointer to pci_dev structure |
| 2178 |
*/ |
| 2179 |
int |
| 2180 |
mpt_resume(struct pci_dev *pdev) |
| 2181 |
{ |
| 2182 |
MPT_ADAPTER *ioc = pci_get_drvdata(pdev); |
| 2183 |
u32 device_state = pdev->current_state; |
| 2184 |
int recovery_state; |
| 2185 |
int err; |
| 2186 |
|
| 2187 |
printk(MYIOC_s_INFO_FMT "pci-resume: pdev=0x%p, slot=%s, Previous " |
| 2188 |
"operating state [D%d]\n", ioc->name, pdev, pci_name(pdev), |
| 2189 |
device_state); |
| 2190 |
|
| 2191 |
pci_set_power_state(pdev, PCI_D0); |
| 2192 |
pci_enable_wake(pdev, PCI_D0, 0); |
| 2193 |
pci_restore_state(pdev); |
| 2194 |
ioc->pcidev = pdev; |
| 2195 |
err = mpt_mapresources(ioc); |
| 2196 |
if (err) |
| 2197 |
return err; |
| 2198 |
|
| 2199 |
if (ioc->dma_mask == DMA_BIT_MASK(64)) { |
| 2200 |
if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078) |
| 2201 |
ioc->add_sge = &mpt_add_sge_64bit_1078; |
| 2202 |
else |
| 2203 |
ioc->add_sge = &mpt_add_sge_64bit; |
| 2204 |
ioc->add_chain = &mpt_add_chain_64bit; |
| 2205 |
ioc->sg_addr_size = 8; |
| 2206 |
} else { |
| 2207 |
|
| 2208 |
ioc->add_sge = &mpt_add_sge; |
| 2209 |
ioc->add_chain = &mpt_add_chain; |
| 2210 |
ioc->sg_addr_size = 4; |
| 2211 |
} |
| 2212 |
ioc->SGE_size = sizeof(u32) + ioc->sg_addr_size; |
| 2213 |
|
| 2214 |
printk(MYIOC_s_INFO_FMT "pci-resume: ioc-state=0x%x,doorbell=0x%x\n", |
| 2215 |
ioc->name, (mpt_GetIocState(ioc, 1) >> MPI_IOC_STATE_SHIFT), |
| 2216 |
CHIPREG_READ32(&ioc->chip->Doorbell)); |
| 2217 |
|
| 2218 |
/* |
| 2219 |
* Errata workaround for SAS pci express: |
| 2220 |
* Upon returning to the D0 state, the contents of the doorbell will be |
| 2221 |
* stale data, and this will incorrectly signal to the host driver that |
| 2222 |
* the firmware is ready to process mpt commands. The workaround is |
| 2223 |
* to issue a diagnostic reset. |
| 2224 |
*/ |
| 2225 |
if (ioc->bus_type == SAS && (pdev->device == |
| 2226 |
MPI_MANUFACTPAGE_DEVID_SAS1068E || pdev->device == |
| 2227 |
MPI_MANUFACTPAGE_DEVID_SAS1064E)) { |
| 2228 |
if (KickStart(ioc, 1, CAN_SLEEP) < 0) { |
| 2229 |
printk(MYIOC_s_WARN_FMT "pci-resume: Cannot recover\n", |
| 2230 |
ioc->name); |
| 2231 |
goto out; |
| 2232 |
} |
| 2233 |
} |
| 2234 |
|
| 2235 |
/* bring ioc to operational state */ |
| 2236 |
printk(MYIOC_s_INFO_FMT "Sending mpt_do_ioc_recovery\n", ioc->name); |
| 2237 |
recovery_state = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP, |
| 2238 |
CAN_SLEEP); |
| 2239 |
if (recovery_state != 0) |
| 2240 |
printk(MYIOC_s_WARN_FMT "pci-resume: Cannot recover, " |
| 2241 |
"error:[%x]\n", ioc->name, recovery_state); |
| 2242 |
else |
| 2243 |
printk(MYIOC_s_INFO_FMT |
| 2244 |
"pci-resume: success\n", ioc->name); |
| 2245 |
out: |
| 2246 |
return 0; |
| 2247 |
|
| 2248 |
} |
| 2249 |
#endif |
| 2250 |
|
| 2251 |
static int |
| 2252 |
mpt_signal_reset(u8 index, MPT_ADAPTER *ioc, int reset_phase) |
| 2253 |
{ |
| 2254 |
if ((MptDriverClass[index] == MPTSPI_DRIVER && |
| 2255 |
ioc->bus_type != SPI) || |
| 2256 |
(MptDriverClass[index] == MPTFC_DRIVER && |
| 2257 |
ioc->bus_type != FC) || |
| 2258 |
(MptDriverClass[index] == MPTSAS_DRIVER && |
| 2259 |
ioc->bus_type != SAS)) |
| 2260 |
/* make sure we only call the relevant reset handler |
| 2261 |
* for the bus */ |
| 2262 |
return 0; |
| 2263 |
return (MptResetHandlers[index])(ioc, reset_phase); |
| 2264 |
} |
| 2265 |
|
| 2266 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 2267 |
/** |
| 2268 |
* mpt_do_ioc_recovery - Initialize or recover MPT adapter. |
| 2269 |
* @ioc: Pointer to MPT adapter structure |
| 2270 |
* @reason: Event word / reason |
| 2271 |
* @sleepFlag: Use schedule if CAN_SLEEP else use udelay. |
| 2272 |
* |
| 2273 |
* This routine performs all the steps necessary to bring the IOC |
| 2274 |
* to a OPERATIONAL state. |
| 2275 |
* |
| 2276 |
* This routine also pre-fetches the LAN MAC address of a Fibre Channel |
| 2277 |
* MPT adapter. |
| 2278 |
* |
| 2279 |
* Returns: |
| 2280 |
* 0 for success |
| 2281 |
* -1 if failed to get board READY |
| 2282 |
* -2 if READY but IOCFacts Failed |
| 2283 |
* -3 if READY but PrimeIOCFifos Failed |
| 2284 |
* -4 if READY but IOCInit Failed |
| 2285 |
* -5 if failed to enable_device and/or request_selected_regions |
| 2286 |
* -6 if failed to upload firmware |
| 2287 |
*/ |
| 2288 |
static int |
| 2289 |
mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag) |
| 2290 |
{ |
| 2291 |
int hard_reset_done = 0; |
| 2292 |
int alt_ioc_ready = 0; |
| 2293 |
int hard; |
| 2294 |
int rc=0; |
| 2295 |
int ii; |
| 2296 |
int ret = 0; |
| 2297 |
int reset_alt_ioc_active = 0; |
| 2298 |
int irq_allocated = 0; |
| 2299 |
u8 *a; |
| 2300 |
|
| 2301 |
printk(MYIOC_s_INFO_FMT "Initiating %s\n", ioc->name, |
| 2302 |
reason == MPT_HOSTEVENT_IOC_BRINGUP ? "bringup" : "recovery"); |
| 2303 |
|
| 2304 |
/* Disable reply interrupts (also blocks FreeQ) */ |
| 2305 |
CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF); |
| 2306 |
ioc->active = 0; |
| 2307 |
|
| 2308 |
if (ioc->alt_ioc) { |
| 2309 |
if (ioc->alt_ioc->active || |
| 2310 |
reason == MPT_HOSTEVENT_IOC_RECOVER) { |
| 2311 |
reset_alt_ioc_active = 1; |
| 2312 |
/* Disable alt-IOC's reply interrupts |
| 2313 |
* (and FreeQ) for a bit |
| 2314 |
**/ |
| 2315 |
CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, |
| 2316 |
0xFFFFFFFF); |
| 2317 |
ioc->alt_ioc->active = 0; |
| 2318 |
} |
| 2319 |
} |
| 2320 |
|
| 2321 |
hard = 1; |
| 2322 |
if (reason == MPT_HOSTEVENT_IOC_BRINGUP) |
| 2323 |
hard = 0; |
| 2324 |
|
| 2325 |
if ((hard_reset_done = MakeIocReady(ioc, hard, sleepFlag)) < 0) { |
| 2326 |
if (hard_reset_done == -4) { |
| 2327 |
printk(MYIOC_s_WARN_FMT "Owned by PEER..skipping!\n", |
| 2328 |
ioc->name); |
| 2329 |
|
| 2330 |
if (reset_alt_ioc_active && ioc->alt_ioc) { |
| 2331 |
/* (re)Enable alt-IOC! (reply interrupt, FreeQ) */ |
| 2332 |
dprintk(ioc, printk(MYIOC_s_INFO_FMT |
| 2333 |
"alt_ioc reply irq re-enabled\n", ioc->alt_ioc->name)); |
| 2334 |
CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, MPI_HIM_DIM); |
| 2335 |
ioc->alt_ioc->active = 1; |
| 2336 |
} |
| 2337 |
|
| 2338 |
} else { |
| 2339 |
printk(MYIOC_s_WARN_FMT |
| 2340 |
"NOT READY WARNING!\n", ioc->name); |
| 2341 |
} |
| 2342 |
ret = -1; |
| 2343 |
goto out; |
| 2344 |
} |
| 2345 |
|
| 2346 |
/* hard_reset_done = 0 if a soft reset was performed |
| 2347 |
* and 1 if a hard reset was performed. |
| 2348 |
*/ |
| 2349 |
if (hard_reset_done && reset_alt_ioc_active && ioc->alt_ioc) { |
| 2350 |
if ((rc = MakeIocReady(ioc->alt_ioc, 0, sleepFlag)) == 0) |
| 2351 |
alt_ioc_ready = 1; |
| 2352 |
else |
| 2353 |
printk(MYIOC_s_WARN_FMT |
| 2354 |
": alt-ioc Not ready WARNING!\n", |
| 2355 |
ioc->alt_ioc->name); |
| 2356 |
} |
| 2357 |
|
| 2358 |
for (ii=0; ii<5; ii++) { |
| 2359 |
/* Get IOC facts! Allow 5 retries */ |
| 2360 |
if ((rc = GetIocFacts(ioc, sleepFlag, reason)) == 0) |
| 2361 |
break; |
| 2362 |
} |
| 2363 |
|
| 2364 |
|
| 2365 |
if (ii == 5) { |
| 2366 |
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 2367 |
"Retry IocFacts failed rc=%x\n", ioc->name, rc)); |
| 2368 |
ret = -2; |
| 2369 |
} else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) { |
| 2370 |
MptDisplayIocCapabilities(ioc); |
| 2371 |
} |
| 2372 |
|
| 2373 |
if (alt_ioc_ready) { |
| 2374 |
if ((rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason)) != 0) { |
| 2375 |
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 2376 |
"Initial Alt IocFacts failed rc=%x\n", |
| 2377 |
ioc->name, rc)); |
| 2378 |
/* Retry - alt IOC was initialized once |
| 2379 |
*/ |
| 2380 |
rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason); |
| 2381 |
} |
| 2382 |
if (rc) { |
| 2383 |
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 2384 |
"Retry Alt IocFacts failed rc=%x\n", ioc->name, rc)); |
| 2385 |
alt_ioc_ready = 0; |
| 2386 |
reset_alt_ioc_active = 0; |
| 2387 |
} else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) { |
| 2388 |
MptDisplayIocCapabilities(ioc->alt_ioc); |
| 2389 |
} |
| 2390 |
} |
| 2391 |
|
| 2392 |
if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP) && |
| 2393 |
(ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)) { |
| 2394 |
pci_release_selected_regions(ioc->pcidev, ioc->bars); |
| 2395 |
ioc->bars = pci_select_bars(ioc->pcidev, IORESOURCE_MEM | |
| 2396 |
IORESOURCE_IO); |
| 2397 |
if (pci_enable_device(ioc->pcidev)) |
| 2398 |
return -5; |
| 2399 |
if (pci_request_selected_regions(ioc->pcidev, ioc->bars, |
| 2400 |
"mpt")) |
| 2401 |
return -5; |
| 2402 |
} |
| 2403 |
|
| 2404 |
/* |
| 2405 |
* Device is reset now. It must have de-asserted the interrupt line |
| 2406 |
* (if it was asserted) and it should be safe to register for the |
| 2407 |
* interrupt now. |
| 2408 |
*/ |
| 2409 |
if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) { |
| 2410 |
ioc->pci_irq = -1; |
| 2411 |
if (ioc->pcidev->irq) { |
| 2412 |
if (ioc->msi_enable && !pci_enable_msi(ioc->pcidev)) |
| 2413 |
printk(MYIOC_s_INFO_FMT "PCI-MSI enabled\n", |
| 2414 |
ioc->name); |
| 2415 |
else |
| 2416 |
ioc->msi_enable = 0; |
| 2417 |
rc = request_irq(ioc->pcidev->irq, mpt_interrupt, |
| 2418 |
IRQF_SHARED, ioc->name, ioc); |
| 2419 |
if (rc < 0) { |
| 2420 |
printk(MYIOC_s_ERR_FMT "Unable to allocate " |
| 2421 |
"interrupt %d!\n", |
| 2422 |
ioc->name, ioc->pcidev->irq); |
| 2423 |
if (ioc->msi_enable) |
| 2424 |
pci_disable_msi(ioc->pcidev); |
| 2425 |
ret = -EBUSY; |
| 2426 |
goto out; |
| 2427 |
} |
| 2428 |
irq_allocated = 1; |
| 2429 |
ioc->pci_irq = ioc->pcidev->irq; |
| 2430 |
pci_set_master(ioc->pcidev); /* ?? */ |
| 2431 |
pci_set_drvdata(ioc->pcidev, ioc); |
| 2432 |
dinitprintk(ioc, printk(MYIOC_s_INFO_FMT |
| 2433 |
"installed at interrupt %d\n", ioc->name, |
| 2434 |
ioc->pcidev->irq)); |
| 2435 |
} |
| 2436 |
} |
| 2437 |
|
| 2438 |
/* Prime reply & request queues! |
| 2439 |
* (mucho alloc's) Must be done prior to |
| 2440 |
* init as upper addresses are needed for init. |
| 2441 |
* If fails, continue with alt-ioc processing |
| 2442 |
*/ |
| 2443 |
dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "PrimeIocFifos\n", |
| 2444 |
ioc->name)); |
| 2445 |
if ((ret == 0) && ((rc = PrimeIocFifos(ioc)) != 0)) |
| 2446 |
ret = -3; |
| 2447 |
|
| 2448 |
/* May need to check/upload firmware & data here! |
| 2449 |
* If fails, continue with alt-ioc processing |
| 2450 |
*/ |
| 2451 |
dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "SendIocInit\n", |
| 2452 |
ioc->name)); |
| 2453 |
if ((ret == 0) && ((rc = SendIocInit(ioc, sleepFlag)) != 0)) |
| 2454 |
ret = -4; |
| 2455 |
// NEW! |
| 2456 |
if (alt_ioc_ready && ((rc = PrimeIocFifos(ioc->alt_ioc)) != 0)) { |
| 2457 |
printk(MYIOC_s_WARN_FMT |
| 2458 |
": alt-ioc (%d) FIFO mgmt alloc WARNING!\n", |
| 2459 |
ioc->alt_ioc->name, rc); |
| 2460 |
alt_ioc_ready = 0; |
| 2461 |
reset_alt_ioc_active = 0; |
| 2462 |
} |
| 2463 |
|
| 2464 |
if (alt_ioc_ready) { |
| 2465 |
if ((rc = SendIocInit(ioc->alt_ioc, sleepFlag)) != 0) { |
| 2466 |
alt_ioc_ready = 0; |
| 2467 |
reset_alt_ioc_active = 0; |
| 2468 |
printk(MYIOC_s_WARN_FMT |
| 2469 |
": alt-ioc: (%d) init failure WARNING!\n", |
| 2470 |
ioc->alt_ioc->name, rc); |
| 2471 |
} |
| 2472 |
} |
| 2473 |
|
| 2474 |
if (reason == MPT_HOSTEVENT_IOC_BRINGUP){ |
| 2475 |
if (ioc->upload_fw) { |
| 2476 |
ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 2477 |
"firmware upload required!\n", ioc->name)); |
| 2478 |
|
| 2479 |
/* Controller is not operational, cannot do upload |
| 2480 |
*/ |
| 2481 |
if (ret == 0) { |
| 2482 |
rc = mpt_do_upload(ioc, sleepFlag); |
| 2483 |
if (rc == 0) { |
| 2484 |
if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) { |
| 2485 |
/* |
| 2486 |
* Maintain only one pointer to FW memory |
| 2487 |
* so there will not be two attempt to |
| 2488 |
* downloadboot onboard dual function |
| 2489 |
* chips (mpt_adapter_disable, |
| 2490 |
* mpt_diag_reset) |
| 2491 |
*/ |
| 2492 |
ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 2493 |
"mpt_upload: alt_%s has cached_fw=%p \n", |
| 2494 |
ioc->name, ioc->alt_ioc->name, ioc->alt_ioc->cached_fw)); |
| 2495 |
ioc->cached_fw = NULL; |
| 2496 |
} |
| 2497 |
} else { |
| 2498 |
printk(MYIOC_s_WARN_FMT |
| 2499 |
"firmware upload failure!\n", ioc->name); |
| 2500 |
ret = -6; |
| 2501 |
} |
| 2502 |
} |
| 2503 |
} |
| 2504 |
} |
| 2505 |
|
| 2506 |
/* Enable MPT base driver management of EventNotification |
| 2507 |
* and EventAck handling. |
| 2508 |
*/ |
| 2509 |
if ((ret == 0) && (!ioc->facts.EventState)) { |
| 2510 |
dinitprintk(ioc, printk(MYIOC_s_INFO_FMT |
| 2511 |
"SendEventNotification\n", |
| 2512 |
ioc->name)); |
| 2513 |
ret = SendEventNotification(ioc, 1, sleepFlag); /* 1=Enable */ |
| 2514 |
} |
| 2515 |
|
| 2516 |
if (ioc->alt_ioc && alt_ioc_ready && !ioc->alt_ioc->facts.EventState) |
| 2517 |
rc = SendEventNotification(ioc->alt_ioc, 1, sleepFlag); |
| 2518 |
|
| 2519 |
if (ret == 0) { |
| 2520 |
/* Enable! (reply interrupt) */ |
| 2521 |
CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM); |
| 2522 |
ioc->active = 1; |
| 2523 |
} |
| 2524 |
if (rc == 0) { /* alt ioc */ |
| 2525 |
if (reset_alt_ioc_active && ioc->alt_ioc) { |
| 2526 |
/* (re)Enable alt-IOC! (reply interrupt) */ |
| 2527 |
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "alt-ioc" |
| 2528 |
"reply irq re-enabled\n", |
| 2529 |
ioc->alt_ioc->name)); |
| 2530 |
CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, |
| 2531 |
MPI_HIM_DIM); |
| 2532 |
ioc->alt_ioc->active = 1; |
| 2533 |
} |
| 2534 |
} |
| 2535 |
|
| 2536 |
|
| 2537 |
/* Add additional "reason" check before call to GetLanConfigPages |
| 2538 |
* (combined with GetIoUnitPage2 call). This prevents a somewhat |
| 2539 |
* recursive scenario; GetLanConfigPages times out, timer expired |
| 2540 |
* routine calls HardResetHandler, which calls into here again, |
| 2541 |
* and we try GetLanConfigPages again... |
| 2542 |
*/ |
| 2543 |
if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) { |
| 2544 |
|
| 2545 |
/* |
| 2546 |
* Initialize link list for inactive raid volumes. |
| 2547 |
*/ |
| 2548 |
mutex_init(&ioc->raid_data.inactive_list_mutex); |
| 2549 |
INIT_LIST_HEAD(&ioc->raid_data.inactive_list); |
| 2550 |
|
| 2551 |
switch (ioc->bus_type) { |
| 2552 |
|
| 2553 |
case SAS: |
| 2554 |
/* clear persistency table */ |
| 2555 |
if(ioc->facts.IOCExceptions & |
| 2556 |
MPI_IOCFACTS_EXCEPT_PERSISTENT_TABLE_FULL) { |
| 2557 |
ret = mptbase_sas_persist_operation(ioc, |
| 2558 |
MPI_SAS_OP_CLEAR_NOT_PRESENT); |
| 2559 |
if(ret != 0) |
| 2560 |
goto out; |
| 2561 |
} |
| 2562 |
|
| 2563 |
/* Find IM volumes |
| 2564 |
*/ |
| 2565 |
mpt_findImVolumes(ioc); |
| 2566 |
|
| 2567 |
/* Check, and possibly reset, the coalescing value |
| 2568 |
*/ |
| 2569 |
mpt_read_ioc_pg_1(ioc); |
| 2570 |
|
| 2571 |
break; |
| 2572 |
|
| 2573 |
case FC: |
| 2574 |
if ((ioc->pfacts[0].ProtocolFlags & |
| 2575 |
MPI_PORTFACTS_PROTOCOL_LAN) && |
| 2576 |
(ioc->lan_cnfg_page0.Header.PageLength == 0)) { |
| 2577 |
/* |
| 2578 |
* Pre-fetch the ports LAN MAC address! |
| 2579 |
* (LANPage1_t stuff) |
| 2580 |
*/ |
| 2581 |
(void) GetLanConfigPages(ioc); |
| 2582 |
a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow; |
| 2583 |
dprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 2584 |
"LanAddr = %pMR\n", ioc->name, a)); |
| 2585 |
} |
| 2586 |
break; |
| 2587 |
|
| 2588 |
case SPI: |
| 2589 |
/* Get NVRAM and adapter maximums from SPP 0 and 2 |
| 2590 |
*/ |
| 2591 |
mpt_GetScsiPortSettings(ioc, 0); |
| 2592 |
|
| 2593 |
/* Get version and length of SDP 1 |
| 2594 |
*/ |
| 2595 |
mpt_readScsiDevicePageHeaders(ioc, 0); |
| 2596 |
|
| 2597 |
/* Find IM volumes |
| 2598 |
*/ |
| 2599 |
if (ioc->facts.MsgVersion >= MPI_VERSION_01_02) |
| 2600 |
mpt_findImVolumes(ioc); |
| 2601 |
|
| 2602 |
/* Check, and possibly reset, the coalescing value |
| 2603 |
*/ |
| 2604 |
mpt_read_ioc_pg_1(ioc); |
| 2605 |
|
| 2606 |
mpt_read_ioc_pg_4(ioc); |
| 2607 |
|
| 2608 |
break; |
| 2609 |
} |
| 2610 |
|
| 2611 |
GetIoUnitPage2(ioc); |
| 2612 |
mpt_get_manufacturing_pg_0(ioc); |
| 2613 |
} |
| 2614 |
|
| 2615 |
out: |
| 2616 |
if ((ret != 0) && irq_allocated) { |
| 2617 |
free_irq(ioc->pci_irq, ioc); |
| 2618 |
if (ioc->msi_enable) |
| 2619 |
pci_disable_msi(ioc->pcidev); |
| 2620 |
} |
| 2621 |
return ret; |
| 2622 |
} |
| 2623 |
|
| 2624 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 2625 |
/** |
| 2626 |
* mpt_detect_bound_ports - Search for matching PCI bus/dev_function |
| 2627 |
* @ioc: Pointer to MPT adapter structure |
| 2628 |
* @pdev: Pointer to (struct pci_dev) structure |
| 2629 |
* |
| 2630 |
* Search for PCI bus/dev_function which matches |
| 2631 |
* PCI bus/dev_function (+/-1) for newly discovered 929, |
| 2632 |
* 929X, 1030 or 1035. |
| 2633 |
* |
| 2634 |
* If match on PCI dev_function +/-1 is found, bind the two MPT adapters |
| 2635 |
* using alt_ioc pointer fields in their %MPT_ADAPTER structures. |
| 2636 |
*/ |
| 2637 |
static void |
| 2638 |
mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev) |
| 2639 |
{ |
| 2640 |
struct pci_dev *peer=NULL; |
| 2641 |
unsigned int slot = PCI_SLOT(pdev->devfn); |
| 2642 |
unsigned int func = PCI_FUNC(pdev->devfn); |
| 2643 |
MPT_ADAPTER *ioc_srch; |
| 2644 |
|
| 2645 |
dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "PCI device %s devfn=%x/%x," |
| 2646 |
" searching for devfn match on %x or %x\n", |
| 2647 |
ioc->name, pci_name(pdev), pdev->bus->number, |
| 2648 |
pdev->devfn, func-1, func+1)); |
| 2649 |
|
| 2650 |
peer = pci_get_slot(pdev->bus, PCI_DEVFN(slot,func-1)); |
| 2651 |
if (!peer) { |
| 2652 |
peer = pci_get_slot(pdev->bus, PCI_DEVFN(slot,func+1)); |
| 2653 |
if (!peer) |
| 2654 |
return; |
| 2655 |
} |
| 2656 |
|
| 2657 |
list_for_each_entry(ioc_srch, &ioc_list, list) { |
| 2658 |
struct pci_dev *_pcidev = ioc_srch->pcidev; |
| 2659 |
if (_pcidev == peer) { |
| 2660 |
/* Paranoia checks */ |
| 2661 |
if (ioc->alt_ioc != NULL) { |
| 2662 |
printk(MYIOC_s_WARN_FMT |
| 2663 |
"Oops, already bound (%s <==> %s)!\n", |
| 2664 |
ioc->name, ioc->name, ioc->alt_ioc->name); |
| 2665 |
break; |
| 2666 |
} else if (ioc_srch->alt_ioc != NULL) { |
| 2667 |
printk(MYIOC_s_WARN_FMT |
| 2668 |
"Oops, already bound (%s <==> %s)!\n", |
| 2669 |
ioc_srch->name, ioc_srch->name, |
| 2670 |
ioc_srch->alt_ioc->name); |
| 2671 |
break; |
| 2672 |
} |
| 2673 |
dprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 2674 |
"FOUND! binding %s <==> %s\n", |
| 2675 |
ioc->name, ioc->name, ioc_srch->name)); |
| 2676 |
ioc_srch->alt_ioc = ioc; |
| 2677 |
ioc->alt_ioc = ioc_srch; |
| 2678 |
} |
| 2679 |
} |
| 2680 |
pci_dev_put(peer); |
| 2681 |
} |
| 2682 |
|
| 2683 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 2684 |
/** |
| 2685 |
* mpt_adapter_disable - Disable misbehaving MPT adapter. |
| 2686 |
* @ioc: Pointer to MPT adapter structure |
| 2687 |
*/ |
| 2688 |
static void |
| 2689 |
mpt_adapter_disable(MPT_ADAPTER *ioc) |
| 2690 |
{ |
| 2691 |
int sz; |
| 2692 |
int ret; |
| 2693 |
|
| 2694 |
if (ioc->cached_fw != NULL) { |
| 2695 |
ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 2696 |
"%s: Pushing FW onto adapter\n", __func__, ioc->name)); |
| 2697 |
if ((ret = mpt_downloadboot(ioc, (MpiFwHeader_t *) |
| 2698 |
ioc->cached_fw, CAN_SLEEP)) < 0) { |
| 2699 |
printk(MYIOC_s_WARN_FMT |
| 2700 |
": firmware downloadboot failure (%d)!\n", |
| 2701 |
ioc->name, ret); |
| 2702 |
} |
| 2703 |
} |
| 2704 |
|
| 2705 |
/* |
| 2706 |
* Put the controller into ready state (if its not already) |
| 2707 |
*/ |
| 2708 |
if (mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_READY) { |
| 2709 |
if (!SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, |
| 2710 |
CAN_SLEEP)) { |
| 2711 |
if (mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_READY) |
| 2712 |
printk(MYIOC_s_ERR_FMT "%s: IOC msg unit " |
| 2713 |
"reset failed to put ioc in ready state!\n", |
| 2714 |
ioc->name, __func__); |
| 2715 |
} else |
| 2716 |
printk(MYIOC_s_ERR_FMT "%s: IOC msg unit reset " |
| 2717 |
"failed!\n", ioc->name, __func__); |
| 2718 |
} |
| 2719 |
|
| 2720 |
|
| 2721 |
/* Disable adapter interrupts! */ |
| 2722 |
synchronize_irq(ioc->pcidev->irq); |
| 2723 |
CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF); |
| 2724 |
ioc->active = 0; |
| 2725 |
|
| 2726 |
/* Clear any lingering interrupt */ |
| 2727 |
CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); |
| 2728 |
CHIPREG_READ32(&ioc->chip->IntStatus); |
| 2729 |
|
| 2730 |
if (ioc->alloc != NULL) { |
| 2731 |
sz = ioc->alloc_sz; |
| 2732 |
dexitprintk(ioc, printk(MYIOC_s_INFO_FMT "free @ %p, sz=%d bytes\n", |
| 2733 |
ioc->name, ioc->alloc, ioc->alloc_sz)); |
| 2734 |
dma_free_coherent(&ioc->pcidev->dev, sz, ioc->alloc, |
| 2735 |
ioc->alloc_dma); |
| 2736 |
ioc->reply_frames = NULL; |
| 2737 |
ioc->req_frames = NULL; |
| 2738 |
ioc->alloc = NULL; |
| 2739 |
ioc->alloc_total -= sz; |
| 2740 |
} |
| 2741 |
|
| 2742 |
if (ioc->sense_buf_pool != NULL) { |
| 2743 |
sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC); |
| 2744 |
dma_free_coherent(&ioc->pcidev->dev, sz, ioc->sense_buf_pool, |
| 2745 |
ioc->sense_buf_pool_dma); |
| 2746 |
ioc->sense_buf_pool = NULL; |
| 2747 |
ioc->alloc_total -= sz; |
| 2748 |
} |
| 2749 |
|
| 2750 |
if (ioc->events != NULL){ |
| 2751 |
sz = MPTCTL_EVENT_LOG_SIZE * sizeof(MPT_IOCTL_EVENTS); |
| 2752 |
kfree(ioc->events); |
| 2753 |
ioc->events = NULL; |
| 2754 |
ioc->alloc_total -= sz; |
| 2755 |
} |
| 2756 |
|
| 2757 |
mpt_free_fw_memory(ioc); |
| 2758 |
|
| 2759 |
kfree(ioc->spi_data.nvram); |
| 2760 |
mpt_inactive_raid_list_free(ioc); |
| 2761 |
kfree(ioc->raid_data.pIocPg2); |
| 2762 |
kfree(ioc->raid_data.pIocPg3); |
| 2763 |
ioc->spi_data.nvram = NULL; |
| 2764 |
ioc->raid_data.pIocPg3 = NULL; |
| 2765 |
|
| 2766 |
if (ioc->spi_data.pIocPg4 != NULL) { |
| 2767 |
sz = ioc->spi_data.IocPg4Sz; |
| 2768 |
dma_free_coherent(&ioc->pcidev->dev, sz, |
| 2769 |
ioc->spi_data.pIocPg4, |
| 2770 |
ioc->spi_data.IocPg4_dma); |
| 2771 |
ioc->spi_data.pIocPg4 = NULL; |
| 2772 |
ioc->alloc_total -= sz; |
| 2773 |
} |
| 2774 |
|
| 2775 |
if (ioc->ReqToChain != NULL) { |
| 2776 |
kfree(ioc->ReqToChain); |
| 2777 |
kfree(ioc->RequestNB); |
| 2778 |
ioc->ReqToChain = NULL; |
| 2779 |
} |
| 2780 |
|
| 2781 |
kfree(ioc->ChainToChain); |
| 2782 |
ioc->ChainToChain = NULL; |
| 2783 |
|
| 2784 |
if (ioc->HostPageBuffer != NULL) { |
| 2785 |
if((ret = mpt_host_page_access_control(ioc, |
| 2786 |
MPI_DB_HPBAC_FREE_BUFFER, NO_SLEEP)) != 0) { |
| 2787 |
printk(MYIOC_s_ERR_FMT |
| 2788 |
": %s: host page buffers free failed (%d)!\n", |
| 2789 |
ioc->name, __func__, ret); |
| 2790 |
} |
| 2791 |
dexitprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 2792 |
"HostPageBuffer free @ %p, sz=%d bytes\n", |
| 2793 |
ioc->name, ioc->HostPageBuffer, |
| 2794 |
ioc->HostPageBuffer_sz)); |
| 2795 |
dma_free_coherent(&ioc->pcidev->dev, ioc->HostPageBuffer_sz, |
| 2796 |
ioc->HostPageBuffer, ioc->HostPageBuffer_dma); |
| 2797 |
ioc->HostPageBuffer = NULL; |
| 2798 |
ioc->HostPageBuffer_sz = 0; |
| 2799 |
ioc->alloc_total -= ioc->HostPageBuffer_sz; |
| 2800 |
} |
| 2801 |
|
| 2802 |
pci_set_drvdata(ioc->pcidev, NULL); |
| 2803 |
} |
| 2804 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 2805 |
/** |
| 2806 |
* mpt_adapter_dispose - Free all resources associated with an MPT adapter |
| 2807 |
* @ioc: Pointer to MPT adapter structure |
| 2808 |
* |
| 2809 |
* This routine unregisters h/w resources and frees all alloc'd memory |
| 2810 |
* associated with a MPT adapter structure. |
| 2811 |
*/ |
| 2812 |
static void |
| 2813 |
mpt_adapter_dispose(MPT_ADAPTER *ioc) |
| 2814 |
{ |
| 2815 |
int sz_first, sz_last; |
| 2816 |
|
| 2817 |
if (ioc == NULL) |
| 2818 |
return; |
| 2819 |
|
| 2820 |
sz_first = ioc->alloc_total; |
| 2821 |
|
| 2822 |
mpt_adapter_disable(ioc); |
| 2823 |
|
| 2824 |
if (ioc->pci_irq != -1) { |
| 2825 |
free_irq(ioc->pci_irq, ioc); |
| 2826 |
if (ioc->msi_enable) |
| 2827 |
pci_disable_msi(ioc->pcidev); |
| 2828 |
ioc->pci_irq = -1; |
| 2829 |
} |
| 2830 |
|
| 2831 |
if (ioc->memmap != NULL) { |
| 2832 |
iounmap(ioc->memmap); |
| 2833 |
ioc->memmap = NULL; |
| 2834 |
} |
| 2835 |
|
| 2836 |
pci_disable_device(ioc->pcidev); |
| 2837 |
pci_release_selected_regions(ioc->pcidev, ioc->bars); |
| 2838 |
|
| 2839 |
/* Zap the adapter lookup ptr! */ |
| 2840 |
list_del(&ioc->list); |
| 2841 |
|
| 2842 |
sz_last = ioc->alloc_total; |
| 2843 |
dprintk(ioc, printk(MYIOC_s_INFO_FMT "free'd %d of %d bytes\n", |
| 2844 |
ioc->name, sz_first-sz_last+(int)sizeof(*ioc), sz_first)); |
| 2845 |
|
| 2846 |
if (ioc->alt_ioc) |
| 2847 |
ioc->alt_ioc->alt_ioc = NULL; |
| 2848 |
|
| 2849 |
kfree(ioc); |
| 2850 |
} |
| 2851 |
|
| 2852 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 2853 |
/** |
| 2854 |
* MptDisplayIocCapabilities - Disply IOC's capabilities. |
| 2855 |
* @ioc: Pointer to MPT adapter structure |
| 2856 |
*/ |
| 2857 |
static void |
| 2858 |
MptDisplayIocCapabilities(MPT_ADAPTER *ioc) |
| 2859 |
{ |
| 2860 |
int i = 0; |
| 2861 |
|
| 2862 |
printk(KERN_INFO "%s: ", ioc->name); |
| 2863 |
if (ioc->prod_name) |
| 2864 |
pr_cont("%s: ", ioc->prod_name); |
| 2865 |
pr_cont("Capabilities={"); |
| 2866 |
|
| 2867 |
if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_INITIATOR) { |
| 2868 |
pr_cont("Initiator"); |
| 2869 |
i++; |
| 2870 |
} |
| 2871 |
|
| 2872 |
if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_TARGET) { |
| 2873 |
pr_cont("%sTarget", i ? "," : ""); |
| 2874 |
i++; |
| 2875 |
} |
| 2876 |
|
| 2877 |
if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) { |
| 2878 |
pr_cont("%sLAN", i ? "," : ""); |
| 2879 |
i++; |
| 2880 |
} |
| 2881 |
|
| 2882 |
#if 0 |
| 2883 |
/* |
| 2884 |
* This would probably evoke more questions than it's worth |
| 2885 |
*/ |
| 2886 |
if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_TARGET) { |
| 2887 |
pr_cont("%sLogBusAddr", i ? "," : ""); |
| 2888 |
i++; |
| 2889 |
} |
| 2890 |
#endif |
| 2891 |
|
| 2892 |
pr_cont("}\n"); |
| 2893 |
} |
| 2894 |
|
| 2895 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 2896 |
/** |
| 2897 |
* MakeIocReady - Get IOC to a READY state, using KickStart if needed. |
| 2898 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 2899 |
* @force: Force hard KickStart of IOC |
| 2900 |
* @sleepFlag: Specifies whether the process can sleep |
| 2901 |
* |
| 2902 |
* Returns: |
| 2903 |
* 1 - DIAG reset and READY |
| 2904 |
* 0 - READY initially OR soft reset and READY |
| 2905 |
* -1 - Any failure on KickStart |
| 2906 |
* -2 - Msg Unit Reset Failed |
| 2907 |
* -3 - IO Unit Reset Failed |
| 2908 |
* -4 - IOC owned by a PEER |
| 2909 |
*/ |
| 2910 |
static int |
| 2911 |
MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag) |
| 2912 |
{ |
| 2913 |
u32 ioc_state; |
| 2914 |
int statefault = 0; |
| 2915 |
int cntdn; |
| 2916 |
int hard_reset_done = 0; |
| 2917 |
int r; |
| 2918 |
int ii; |
| 2919 |
int whoinit; |
| 2920 |
|
| 2921 |
/* Get current [raw] IOC state */ |
| 2922 |
ioc_state = mpt_GetIocState(ioc, 0); |
| 2923 |
dhsprintk(ioc, printk(MYIOC_s_INFO_FMT "MakeIocReady [raw] state=%08x\n", ioc->name, ioc_state)); |
| 2924 |
|
| 2925 |
/* |
| 2926 |
* Check to see if IOC got left/stuck in doorbell handshake |
| 2927 |
* grip of death. If so, hard reset the IOC. |
| 2928 |
*/ |
| 2929 |
if (ioc_state & MPI_DOORBELL_ACTIVE) { |
| 2930 |
statefault = 1; |
| 2931 |
printk(MYIOC_s_WARN_FMT "Unexpected doorbell active!\n", |
| 2932 |
ioc->name); |
| 2933 |
} |
| 2934 |
|
| 2935 |
/* Is it already READY? */ |
| 2936 |
if (!statefault && |
| 2937 |
((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_READY)) { |
| 2938 |
dinitprintk(ioc, printk(MYIOC_s_INFO_FMT |
| 2939 |
"IOC is in READY state\n", ioc->name)); |
| 2940 |
return 0; |
| 2941 |
} |
| 2942 |
|
| 2943 |
/* |
| 2944 |
* Check to see if IOC is in FAULT state. |
| 2945 |
*/ |
| 2946 |
if ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) { |
| 2947 |
statefault = 2; |
| 2948 |
printk(MYIOC_s_WARN_FMT "IOC is in FAULT state!!!\n", |
| 2949 |
ioc->name); |
| 2950 |
printk(MYIOC_s_WARN_FMT " FAULT code = %04xh\n", |
| 2951 |
ioc->name, ioc_state & MPI_DOORBELL_DATA_MASK); |
| 2952 |
} |
| 2953 |
|
| 2954 |
/* |
| 2955 |
* Hmmm... Did it get left operational? |
| 2956 |
*/ |
| 2957 |
if ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_OPERATIONAL) { |
| 2958 |
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOC operational unexpected\n", |
| 2959 |
ioc->name)); |
| 2960 |
|
| 2961 |
/* Check WhoInit. |
| 2962 |
* If PCI Peer, exit. |
| 2963 |
* Else, if no fault conditions are present, issue a MessageUnitReset |
| 2964 |
* Else, fall through to KickStart case |
| 2965 |
*/ |
| 2966 |
whoinit = (ioc_state & MPI_DOORBELL_WHO_INIT_MASK) >> MPI_DOORBELL_WHO_INIT_SHIFT; |
| 2967 |
dinitprintk(ioc, printk(MYIOC_s_INFO_FMT |
| 2968 |
"whoinit 0x%x statefault %d force %d\n", |
| 2969 |
ioc->name, whoinit, statefault, force)); |
| 2970 |
if (whoinit == MPI_WHOINIT_PCI_PEER) |
| 2971 |
return -4; |
| 2972 |
else { |
| 2973 |
if ((statefault == 0 ) && (force == 0)) { |
| 2974 |
if ((r = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag)) == 0) |
| 2975 |
return 0; |
| 2976 |
} |
| 2977 |
statefault = 3; |
| 2978 |
} |
| 2979 |
} |
| 2980 |
|
| 2981 |
hard_reset_done = KickStart(ioc, statefault||force, sleepFlag); |
| 2982 |
if (hard_reset_done < 0) |
| 2983 |
return -1; |
| 2984 |
|
| 2985 |
/* |
| 2986 |
* Loop here waiting for IOC to come READY. |
| 2987 |
*/ |
| 2988 |
ii = 0; |
| 2989 |
cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 5; /* 5 seconds */ |
| 2990 |
|
| 2991 |
while ((ioc_state = mpt_GetIocState(ioc, 1)) != MPI_IOC_STATE_READY) { |
| 2992 |
if (ioc_state == MPI_IOC_STATE_OPERATIONAL) { |
| 2993 |
/* |
| 2994 |
* BIOS or previous driver load left IOC in OP state. |
| 2995 |
* Reset messaging FIFOs. |
| 2996 |
*/ |
| 2997 |
if ((r = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag)) != 0) { |
| 2998 |
printk(MYIOC_s_ERR_FMT "IOC msg unit reset failed!\n", ioc->name); |
| 2999 |
return -2; |
| 3000 |
} |
| 3001 |
} else if (ioc_state == MPI_IOC_STATE_RESET) { |
| 3002 |
/* |
| 3003 |
* Something is wrong. Try to get IOC back |
| 3004 |
* to a known state. |
| 3005 |
*/ |
| 3006 |
if ((r = SendIocReset(ioc, MPI_FUNCTION_IO_UNIT_RESET, sleepFlag)) != 0) { |
| 3007 |
printk(MYIOC_s_ERR_FMT "IO unit reset failed!\n", ioc->name); |
| 3008 |
return -3; |
| 3009 |
} |
| 3010 |
} |
| 3011 |
|
| 3012 |
ii++; cntdn--; |
| 3013 |
if (!cntdn) { |
| 3014 |
printk(MYIOC_s_ERR_FMT |
| 3015 |
"Wait IOC_READY state (0x%x) timeout(%d)!\n", |
| 3016 |
ioc->name, ioc_state, (int)((ii+5)/HZ)); |
| 3017 |
return -ETIME; |
| 3018 |
} |
| 3019 |
|
| 3020 |
if (sleepFlag == CAN_SLEEP) { |
| 3021 |
msleep(1); |
| 3022 |
} else { |
| 3023 |
mdelay (1); /* 1 msec delay */ |
| 3024 |
} |
| 3025 |
|
| 3026 |
} |
| 3027 |
|
| 3028 |
if (statefault < 3) { |
| 3029 |
printk(MYIOC_s_INFO_FMT "Recovered from %s\n", ioc->name, |
| 3030 |
statefault == 1 ? "stuck handshake" : "IOC FAULT"); |
| 3031 |
} |
| 3032 |
|
| 3033 |
return hard_reset_done; |
| 3034 |
} |
| 3035 |
|
| 3036 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 3037 |
/** |
| 3038 |
* mpt_GetIocState - Get the current state of a MPT adapter. |
| 3039 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 3040 |
* @cooked: Request raw or cooked IOC state |
| 3041 |
* |
| 3042 |
* Returns all IOC Doorbell register bits if cooked==0, else just the |
| 3043 |
* Doorbell bits in MPI_IOC_STATE_MASK. |
| 3044 |
*/ |
| 3045 |
u32 |
| 3046 |
mpt_GetIocState(MPT_ADAPTER *ioc, int cooked) |
| 3047 |
{ |
| 3048 |
u32 s, sc; |
| 3049 |
|
| 3050 |
/* Get! */ |
| 3051 |
s = CHIPREG_READ32(&ioc->chip->Doorbell); |
| 3052 |
sc = s & MPI_IOC_STATE_MASK; |
| 3053 |
|
| 3054 |
/* Save! */ |
| 3055 |
ioc->last_state = sc; |
| 3056 |
|
| 3057 |
return cooked ? sc : s; |
| 3058 |
} |
| 3059 |
|
| 3060 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 3061 |
/** |
| 3062 |
* GetIocFacts - Send IOCFacts request to MPT adapter. |
| 3063 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 3064 |
* @sleepFlag: Specifies whether the process can sleep |
| 3065 |
* @reason: If recovery, only update facts. |
| 3066 |
* |
| 3067 |
* Returns 0 for success, non-zero for failure. |
| 3068 |
*/ |
| 3069 |
static int |
| 3070 |
GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason) |
| 3071 |
{ |
| 3072 |
IOCFacts_t get_facts; |
| 3073 |
IOCFactsReply_t *facts; |
| 3074 |
int r; |
| 3075 |
int req_sz; |
| 3076 |
int reply_sz; |
| 3077 |
int sz; |
| 3078 |
u32 vv; |
| 3079 |
u8 shiftFactor=1; |
| 3080 |
|
| 3081 |
/* IOC *must* NOT be in RESET state! */ |
| 3082 |
if (ioc->last_state == MPI_IOC_STATE_RESET) { |
| 3083 |
printk(KERN_ERR MYNAM |
| 3084 |
": ERROR - Can't get IOCFacts, %s NOT READY! (%08x)\n", |
| 3085 |
ioc->name, ioc->last_state); |
| 3086 |
return -44; |
| 3087 |
} |
| 3088 |
|
| 3089 |
facts = &ioc->facts; |
| 3090 |
|
| 3091 |
/* Destination (reply area)... */ |
| 3092 |
reply_sz = sizeof(*facts); |
| 3093 |
memset(facts, 0, reply_sz); |
| 3094 |
|
| 3095 |
/* Request area (get_facts on the stack right now!) */ |
| 3096 |
req_sz = sizeof(get_facts); |
| 3097 |
memset(&get_facts, 0, req_sz); |
| 3098 |
|
| 3099 |
get_facts.Function = MPI_FUNCTION_IOC_FACTS; |
| 3100 |
/* Assert: All other get_facts fields are zero! */ |
| 3101 |
|
| 3102 |
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 3103 |
"Sending get IocFacts request req_sz=%d reply_sz=%d\n", |
| 3104 |
ioc->name, req_sz, reply_sz)); |
| 3105 |
|
| 3106 |
/* No non-zero fields in the get_facts request are greater than |
| 3107 |
* 1 byte in size, so we can just fire it off as is. |
| 3108 |
*/ |
| 3109 |
r = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&get_facts, |
| 3110 |
reply_sz, (u16*)facts, 5 /*seconds*/, sleepFlag); |
| 3111 |
if (r != 0) |
| 3112 |
return r; |
| 3113 |
|
| 3114 |
/* |
| 3115 |
* Now byte swap (GRRR) the necessary fields before any further |
| 3116 |
* inspection of reply contents. |
| 3117 |
* |
| 3118 |
* But need to do some sanity checks on MsgLength (byte) field |
| 3119 |
* to make sure we don't zero IOC's req_sz! |
| 3120 |
*/ |
| 3121 |
/* Did we get a valid reply? */ |
| 3122 |
if (facts->MsgLength > offsetof(IOCFactsReply_t, RequestFrameSize)/sizeof(u32)) { |
| 3123 |
if (reason == MPT_HOSTEVENT_IOC_BRINGUP) { |
| 3124 |
/* |
| 3125 |
* If not been here, done that, save off first WhoInit value |
| 3126 |
*/ |
| 3127 |
if (ioc->FirstWhoInit == WHOINIT_UNKNOWN) |
| 3128 |
ioc->FirstWhoInit = facts->WhoInit; |
| 3129 |
} |
| 3130 |
|
| 3131 |
facts->MsgVersion = le16_to_cpu(facts->MsgVersion); |
| 3132 |
facts->MsgContext = le32_to_cpu(facts->MsgContext); |
| 3133 |
facts->IOCExceptions = le16_to_cpu(facts->IOCExceptions); |
| 3134 |
facts->IOCStatus = le16_to_cpu(facts->IOCStatus); |
| 3135 |
facts->IOCLogInfo = le32_to_cpu(facts->IOCLogInfo); |
| 3136 |
/* CHECKME! IOCStatus, IOCLogInfo */ |
| 3137 |
|
| 3138 |
facts->ReplyQueueDepth = le16_to_cpu(facts->ReplyQueueDepth); |
| 3139 |
facts->RequestFrameSize = le16_to_cpu(facts->RequestFrameSize); |
| 3140 |
|
| 3141 |
/* |
| 3142 |
* FC f/w version changed between 1.1 and 1.2 |
| 3143 |
* Old: u16{Major(4),Minor(4),SubMinor(8)} |
| 3144 |
* New: u32{Major(8),Minor(8),Unit(8),Dev(8)} |
| 3145 |
*/ |
| 3146 |
if (facts->MsgVersion < MPI_VERSION_01_02) { |
| 3147 |
/* |
| 3148 |
* Handle old FC f/w style, convert to new... |
| 3149 |
*/ |
| 3150 |
u16 oldv = le16_to_cpu(facts->Reserved_0101_FWVersion); |
| 3151 |
facts->FWVersion.Word = |
| 3152 |
((oldv<<12) & 0xFF000000) | |
| 3153 |
((oldv<<8) & 0x000FFF00); |
| 3154 |
} else |
| 3155 |
facts->FWVersion.Word = le32_to_cpu(facts->FWVersion.Word); |
| 3156 |
|
| 3157 |
facts->ProductID = le16_to_cpu(facts->ProductID); |
| 3158 |
|
| 3159 |
if ((ioc->facts.ProductID & MPI_FW_HEADER_PID_PROD_MASK) |
| 3160 |
> MPI_FW_HEADER_PID_PROD_TARGET_SCSI) |
| 3161 |
ioc->ir_firmware = 1; |
| 3162 |
|
| 3163 |
facts->CurrentHostMfaHighAddr = |
| 3164 |
le32_to_cpu(facts->CurrentHostMfaHighAddr); |
| 3165 |
facts->GlobalCredits = le16_to_cpu(facts->GlobalCredits); |
| 3166 |
facts->CurrentSenseBufferHighAddr = |
| 3167 |
le32_to_cpu(facts->CurrentSenseBufferHighAddr); |
| 3168 |
facts->CurReplyFrameSize = |
| 3169 |
le16_to_cpu(facts->CurReplyFrameSize); |
| 3170 |
facts->IOCCapabilities = le32_to_cpu(facts->IOCCapabilities); |
| 3171 |
|
| 3172 |
/* |
| 3173 |
* Handle NEW (!) IOCFactsReply fields in MPI-1.01.xx |
| 3174 |
* Older MPI-1.00.xx struct had 13 dwords, and enlarged |
| 3175 |
* to 14 in MPI-1.01.0x. |
| 3176 |
*/ |
| 3177 |
if (facts->MsgLength >= (offsetof(IOCFactsReply_t,FWImageSize) + 7)/4 && |
| 3178 |
facts->MsgVersion > MPI_VERSION_01_00) { |
| 3179 |
facts->FWImageSize = le32_to_cpu(facts->FWImageSize); |
| 3180 |
} |
| 3181 |
|
| 3182 |
facts->FWImageSize = ALIGN(facts->FWImageSize, 4); |
| 3183 |
|
| 3184 |
if (!facts->RequestFrameSize) { |
| 3185 |
/* Something is wrong! */ |
| 3186 |
printk(MYIOC_s_ERR_FMT "IOC reported invalid 0 request size!\n", |
| 3187 |
ioc->name); |
| 3188 |
return -55; |
| 3189 |
} |
| 3190 |
|
| 3191 |
r = sz = facts->BlockSize; |
| 3192 |
vv = ((63 / (sz * 4)) + 1) & 0x03; |
| 3193 |
ioc->NB_for_64_byte_frame = vv; |
| 3194 |
while ( sz ) |
| 3195 |
{ |
| 3196 |
shiftFactor++; |
| 3197 |
sz = sz >> 1; |
| 3198 |
} |
| 3199 |
ioc->NBShiftFactor = shiftFactor; |
| 3200 |
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 3201 |
"NB_for_64_byte_frame=%x NBShiftFactor=%x BlockSize=%x\n", |
| 3202 |
ioc->name, vv, shiftFactor, r)); |
| 3203 |
|
| 3204 |
if (reason == MPT_HOSTEVENT_IOC_BRINGUP) { |
| 3205 |
/* |
| 3206 |
* Set values for this IOC's request & reply frame sizes, |
| 3207 |
* and request & reply queue depths... |
| 3208 |
*/ |
| 3209 |
ioc->req_sz = min(MPT_DEFAULT_FRAME_SIZE, facts->RequestFrameSize * 4); |
| 3210 |
ioc->req_depth = min_t(int, MPT_MAX_REQ_DEPTH, facts->GlobalCredits); |
| 3211 |
ioc->reply_sz = MPT_REPLY_FRAME_SIZE; |
| 3212 |
ioc->reply_depth = min_t(int, MPT_DEFAULT_REPLY_DEPTH, facts->ReplyQueueDepth); |
| 3213 |
|
| 3214 |
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "reply_sz=%3d, reply_depth=%4d\n", |
| 3215 |
ioc->name, ioc->reply_sz, ioc->reply_depth)); |
| 3216 |
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "req_sz =%3d, req_depth =%4d\n", |
| 3217 |
ioc->name, ioc->req_sz, ioc->req_depth)); |
| 3218 |
|
| 3219 |
/* Get port facts! */ |
| 3220 |
if ( (r = GetPortFacts(ioc, 0, sleepFlag)) != 0 ) |
| 3221 |
return r; |
| 3222 |
} |
| 3223 |
} else { |
| 3224 |
printk(MYIOC_s_ERR_FMT |
| 3225 |
"Invalid IOC facts reply, msgLength=%d offsetof=%zd!\n", |
| 3226 |
ioc->name, facts->MsgLength, (offsetof(IOCFactsReply_t, |
| 3227 |
RequestFrameSize)/sizeof(u32))); |
| 3228 |
return -66; |
| 3229 |
} |
| 3230 |
|
| 3231 |
return 0; |
| 3232 |
} |
| 3233 |
|
| 3234 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 3235 |
/** |
| 3236 |
* GetPortFacts - Send PortFacts request to MPT adapter. |
| 3237 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 3238 |
* @portnum: Port number |
| 3239 |
* @sleepFlag: Specifies whether the process can sleep |
| 3240 |
* |
| 3241 |
* Returns 0 for success, non-zero for failure. |
| 3242 |
*/ |
| 3243 |
static int |
| 3244 |
GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag) |
| 3245 |
{ |
| 3246 |
PortFacts_t get_pfacts; |
| 3247 |
PortFactsReply_t *pfacts; |
| 3248 |
int ii; |
| 3249 |
int req_sz; |
| 3250 |
int reply_sz; |
| 3251 |
int max_id; |
| 3252 |
|
| 3253 |
/* IOC *must* NOT be in RESET state! */ |
| 3254 |
if (ioc->last_state == MPI_IOC_STATE_RESET) { |
| 3255 |
printk(MYIOC_s_ERR_FMT "Can't get PortFacts NOT READY! (%08x)\n", |
| 3256 |
ioc->name, ioc->last_state ); |
| 3257 |
return -4; |
| 3258 |
} |
| 3259 |
|
| 3260 |
pfacts = &ioc->pfacts[portnum]; |
| 3261 |
|
| 3262 |
/* Destination (reply area)... */ |
| 3263 |
reply_sz = sizeof(*pfacts); |
| 3264 |
memset(pfacts, 0, reply_sz); |
| 3265 |
|
| 3266 |
/* Request area (get_pfacts on the stack right now!) */ |
| 3267 |
req_sz = sizeof(get_pfacts); |
| 3268 |
memset(&get_pfacts, 0, req_sz); |
| 3269 |
|
| 3270 |
get_pfacts.Function = MPI_FUNCTION_PORT_FACTS; |
| 3271 |
get_pfacts.PortNumber = portnum; |
| 3272 |
/* Assert: All other get_pfacts fields are zero! */ |
| 3273 |
|
| 3274 |
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending get PortFacts(%d) request\n", |
| 3275 |
ioc->name, portnum)); |
| 3276 |
|
| 3277 |
/* No non-zero fields in the get_pfacts request are greater than |
| 3278 |
* 1 byte in size, so we can just fire it off as is. |
| 3279 |
*/ |
| 3280 |
ii = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&get_pfacts, |
| 3281 |
reply_sz, (u16*)pfacts, 5 /*seconds*/, sleepFlag); |
| 3282 |
if (ii != 0) |
| 3283 |
return ii; |
| 3284 |
|
| 3285 |
/* Did we get a valid reply? */ |
| 3286 |
|
| 3287 |
/* Now byte swap the necessary fields in the response. */ |
| 3288 |
pfacts->MsgContext = le32_to_cpu(pfacts->MsgContext); |
| 3289 |
pfacts->IOCStatus = le16_to_cpu(pfacts->IOCStatus); |
| 3290 |
pfacts->IOCLogInfo = le32_to_cpu(pfacts->IOCLogInfo); |
| 3291 |
pfacts->MaxDevices = le16_to_cpu(pfacts->MaxDevices); |
| 3292 |
pfacts->PortSCSIID = le16_to_cpu(pfacts->PortSCSIID); |
| 3293 |
pfacts->ProtocolFlags = le16_to_cpu(pfacts->ProtocolFlags); |
| 3294 |
pfacts->MaxPostedCmdBuffers = le16_to_cpu(pfacts->MaxPostedCmdBuffers); |
| 3295 |
pfacts->MaxPersistentIDs = le16_to_cpu(pfacts->MaxPersistentIDs); |
| 3296 |
pfacts->MaxLanBuckets = le16_to_cpu(pfacts->MaxLanBuckets); |
| 3297 |
|
| 3298 |
max_id = (ioc->bus_type == SAS) ? pfacts->PortSCSIID : |
| 3299 |
pfacts->MaxDevices; |
| 3300 |
ioc->devices_per_bus = (max_id > 255) ? 256 : max_id; |
| 3301 |
ioc->number_of_buses = (ioc->devices_per_bus < 256) ? 1 : max_id/256; |
| 3302 |
|
| 3303 |
/* |
| 3304 |
* Place all the devices on channels |
| 3305 |
* |
| 3306 |
* (for debuging) |
| 3307 |
*/ |
| 3308 |
if (mpt_channel_mapping) { |
| 3309 |
ioc->devices_per_bus = 1; |
| 3310 |
ioc->number_of_buses = (max_id > 255) ? 255 : max_id; |
| 3311 |
} |
| 3312 |
|
| 3313 |
return 0; |
| 3314 |
} |
| 3315 |
|
| 3316 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 3317 |
/** |
| 3318 |
* SendIocInit - Send IOCInit request to MPT adapter. |
| 3319 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 3320 |
* @sleepFlag: Specifies whether the process can sleep |
| 3321 |
* |
| 3322 |
* Send IOCInit followed by PortEnable to bring IOC to OPERATIONAL state. |
| 3323 |
* |
| 3324 |
* Returns 0 for success, non-zero for failure. |
| 3325 |
*/ |
| 3326 |
static int |
| 3327 |
SendIocInit(MPT_ADAPTER *ioc, int sleepFlag) |
| 3328 |
{ |
| 3329 |
IOCInit_t ioc_init; |
| 3330 |
MPIDefaultReply_t init_reply; |
| 3331 |
u32 state; |
| 3332 |
int r; |
| 3333 |
int count; |
| 3334 |
int cntdn; |
| 3335 |
|
| 3336 |
memset(&ioc_init, 0, sizeof(ioc_init)); |
| 3337 |
memset(&init_reply, 0, sizeof(init_reply)); |
| 3338 |
|
| 3339 |
ioc_init.WhoInit = MPI_WHOINIT_HOST_DRIVER; |
| 3340 |
ioc_init.Function = MPI_FUNCTION_IOC_INIT; |
| 3341 |
|
| 3342 |
/* If we are in a recovery mode and we uploaded the FW image, |
| 3343 |
* then this pointer is not NULL. Skip the upload a second time. |
| 3344 |
* Set this flag if cached_fw set for either IOC. |
| 3345 |
*/ |
| 3346 |
if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT) |
| 3347 |
ioc->upload_fw = 1; |
| 3348 |
else |
| 3349 |
ioc->upload_fw = 0; |
| 3350 |
ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "upload_fw %d facts.Flags=%x\n", |
| 3351 |
ioc->name, ioc->upload_fw, ioc->facts.Flags)); |
| 3352 |
|
| 3353 |
ioc_init.MaxDevices = (U8)ioc->devices_per_bus; |
| 3354 |
ioc_init.MaxBuses = (U8)ioc->number_of_buses; |
| 3355 |
|
| 3356 |
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "facts.MsgVersion=%x\n", |
| 3357 |
ioc->name, ioc->facts.MsgVersion)); |
| 3358 |
if (ioc->facts.MsgVersion >= MPI_VERSION_01_05) { |
| 3359 |
// set MsgVersion and HeaderVersion host driver was built with |
| 3360 |
ioc_init.MsgVersion = cpu_to_le16(MPI_VERSION); |
| 3361 |
ioc_init.HeaderVersion = cpu_to_le16(MPI_HEADER_VERSION); |
| 3362 |
|
| 3363 |
if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_HOST_PAGE_BUFFER_PERSISTENT) { |
| 3364 |
ioc_init.HostPageBufferSGE = ioc->facts.HostPageBufferSGE; |
| 3365 |
} else if(mpt_host_page_alloc(ioc, &ioc_init)) |
| 3366 |
return -99; |
| 3367 |
} |
| 3368 |
ioc_init.ReplyFrameSize = cpu_to_le16(ioc->reply_sz); /* in BYTES */ |
| 3369 |
|
| 3370 |
if (ioc->sg_addr_size == sizeof(u64)) { |
| 3371 |
/* Save the upper 32-bits of the request |
| 3372 |
* (reply) and sense buffers. |
| 3373 |
*/ |
| 3374 |
ioc_init.HostMfaHighAddr = cpu_to_le32((u32)((u64)ioc->alloc_dma >> 32)); |
| 3375 |
ioc_init.SenseBufferHighAddr = cpu_to_le32((u32)((u64)ioc->sense_buf_pool_dma >> 32)); |
| 3376 |
} else { |
| 3377 |
/* Force 32-bit addressing */ |
| 3378 |
ioc_init.HostMfaHighAddr = cpu_to_le32(0); |
| 3379 |
ioc_init.SenseBufferHighAddr = cpu_to_le32(0); |
| 3380 |
} |
| 3381 |
|
| 3382 |
ioc->facts.CurrentHostMfaHighAddr = ioc_init.HostMfaHighAddr; |
| 3383 |
ioc->facts.CurrentSenseBufferHighAddr = ioc_init.SenseBufferHighAddr; |
| 3384 |
ioc->facts.MaxDevices = ioc_init.MaxDevices; |
| 3385 |
ioc->facts.MaxBuses = ioc_init.MaxBuses; |
| 3386 |
|
| 3387 |
dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending IOCInit (req @ %p)\n", |
| 3388 |
ioc->name, &ioc_init)); |
| 3389 |
|
| 3390 |
r = mpt_handshake_req_reply_wait(ioc, sizeof(IOCInit_t), (u32*)&ioc_init, |
| 3391 |
sizeof(MPIDefaultReply_t), (u16*)&init_reply, 10 /*seconds*/, sleepFlag); |
| 3392 |
if (r != 0) { |
| 3393 |
printk(MYIOC_s_ERR_FMT "Sending IOCInit failed(%d)!\n",ioc->name, r); |
| 3394 |
return r; |
| 3395 |
} |
| 3396 |
|
| 3397 |
/* No need to byte swap the multibyte fields in the reply |
| 3398 |
* since we don't even look at its contents. |
| 3399 |
*/ |
| 3400 |
|
| 3401 |
dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending PortEnable (req @ %p)\n", |
| 3402 |
ioc->name, &ioc_init)); |
| 3403 |
|
| 3404 |
if ((r = SendPortEnable(ioc, 0, sleepFlag)) != 0) { |
| 3405 |
printk(MYIOC_s_ERR_FMT "Sending PortEnable failed(%d)!\n",ioc->name, r); |
| 3406 |
return r; |
| 3407 |
} |
| 3408 |
|
| 3409 |
/* YIKES! SUPER IMPORTANT!!! |
| 3410 |
* Poll IocState until _OPERATIONAL while IOC is doing |
| 3411 |
* LoopInit and TargetDiscovery! |
| 3412 |
*/ |
| 3413 |
count = 0; |
| 3414 |
cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 60; /* 60 seconds */ |
| 3415 |
state = mpt_GetIocState(ioc, 1); |
| 3416 |
while (state != MPI_IOC_STATE_OPERATIONAL && --cntdn) { |
| 3417 |
if (sleepFlag == CAN_SLEEP) { |
| 3418 |
msleep(1); |
| 3419 |
} else { |
| 3420 |
mdelay(1); |
| 3421 |
} |
| 3422 |
|
| 3423 |
if (!cntdn) { |
| 3424 |
printk(MYIOC_s_ERR_FMT "Wait IOC_OP state timeout(%d)!\n", |
| 3425 |
ioc->name, (int)((count+5)/HZ)); |
| 3426 |
return -9; |
| 3427 |
} |
| 3428 |
|
| 3429 |
state = mpt_GetIocState(ioc, 1); |
| 3430 |
count++; |
| 3431 |
} |
| 3432 |
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Wait IOC_OPERATIONAL state (cnt=%d)\n", |
| 3433 |
ioc->name, count)); |
| 3434 |
|
| 3435 |
ioc->aen_event_read_flag=0; |
| 3436 |
return r; |
| 3437 |
} |
| 3438 |
|
| 3439 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 3440 |
/** |
| 3441 |
* SendPortEnable - Send PortEnable request to MPT adapter port. |
| 3442 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 3443 |
* @portnum: Port number to enable |
| 3444 |
* @sleepFlag: Specifies whether the process can sleep |
| 3445 |
* |
| 3446 |
* Send PortEnable to bring IOC to OPERATIONAL state. |
| 3447 |
* |
| 3448 |
* Returns 0 for success, non-zero for failure. |
| 3449 |
*/ |
| 3450 |
static int |
| 3451 |
SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag) |
| 3452 |
{ |
| 3453 |
PortEnable_t port_enable; |
| 3454 |
MPIDefaultReply_t reply_buf; |
| 3455 |
int rc; |
| 3456 |
int req_sz; |
| 3457 |
int reply_sz; |
| 3458 |
|
| 3459 |
/* Destination... */ |
| 3460 |
reply_sz = sizeof(MPIDefaultReply_t); |
| 3461 |
memset(&reply_buf, 0, reply_sz); |
| 3462 |
|
| 3463 |
req_sz = sizeof(PortEnable_t); |
| 3464 |
memset(&port_enable, 0, req_sz); |
| 3465 |
|
| 3466 |
port_enable.Function = MPI_FUNCTION_PORT_ENABLE; |
| 3467 |
port_enable.PortNumber = portnum; |
| 3468 |
/* port_enable.ChainOffset = 0; */ |
| 3469 |
/* port_enable.MsgFlags = 0; */ |
| 3470 |
/* port_enable.MsgContext = 0; */ |
| 3471 |
|
| 3472 |
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending Port(%d)Enable (req @ %p)\n", |
| 3473 |
ioc->name, portnum, &port_enable)); |
| 3474 |
|
| 3475 |
/* RAID FW may take a long time to enable |
| 3476 |
*/ |
| 3477 |
if (ioc->ir_firmware || ioc->bus_type == SAS) { |
| 3478 |
rc = mpt_handshake_req_reply_wait(ioc, req_sz, |
| 3479 |
(u32*)&port_enable, reply_sz, (u16*)&reply_buf, |
| 3480 |
300 /*seconds*/, sleepFlag); |
| 3481 |
} else { |
| 3482 |
rc = mpt_handshake_req_reply_wait(ioc, req_sz, |
| 3483 |
(u32*)&port_enable, reply_sz, (u16*)&reply_buf, |
| 3484 |
30 /*seconds*/, sleepFlag); |
| 3485 |
} |
| 3486 |
return rc; |
| 3487 |
} |
| 3488 |
|
| 3489 |
/** |
| 3490 |
* mpt_alloc_fw_memory - allocate firmware memory |
| 3491 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 3492 |
* @size: total FW bytes |
| 3493 |
* |
| 3494 |
* If memory has already been allocated, the same (cached) value |
| 3495 |
* is returned. |
| 3496 |
* |
| 3497 |
* Return 0 if successful, or non-zero for failure |
| 3498 |
**/ |
| 3499 |
int |
| 3500 |
mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size) |
| 3501 |
{ |
| 3502 |
int rc; |
| 3503 |
|
| 3504 |
if (ioc->cached_fw) { |
| 3505 |
rc = 0; /* use already allocated memory */ |
| 3506 |
goto out; |
| 3507 |
} |
| 3508 |
else if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) { |
| 3509 |
ioc->cached_fw = ioc->alt_ioc->cached_fw; /* use alt_ioc's memory */ |
| 3510 |
ioc->cached_fw_dma = ioc->alt_ioc->cached_fw_dma; |
| 3511 |
rc = 0; |
| 3512 |
goto out; |
| 3513 |
} |
| 3514 |
ioc->cached_fw = dma_alloc_coherent(&ioc->pcidev->dev, size, |
| 3515 |
&ioc->cached_fw_dma, GFP_ATOMIC); |
| 3516 |
if (!ioc->cached_fw) { |
| 3517 |
printk(MYIOC_s_ERR_FMT "Unable to allocate memory for the cached firmware image!\n", |
| 3518 |
ioc->name); |
| 3519 |
rc = -1; |
| 3520 |
} else { |
| 3521 |
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Image @ %p[%p], sz=%d[%x] bytes\n", |
| 3522 |
ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, size, size)); |
| 3523 |
ioc->alloc_total += size; |
| 3524 |
rc = 0; |
| 3525 |
} |
| 3526 |
out: |
| 3527 |
return rc; |
| 3528 |
} |
| 3529 |
|
| 3530 |
/** |
| 3531 |
* mpt_free_fw_memory - free firmware memory |
| 3532 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 3533 |
* |
| 3534 |
* If alt_img is NULL, delete from ioc structure. |
| 3535 |
* Else, delete a secondary image in same format. |
| 3536 |
**/ |
| 3537 |
void |
| 3538 |
mpt_free_fw_memory(MPT_ADAPTER *ioc) |
| 3539 |
{ |
| 3540 |
int sz; |
| 3541 |
|
| 3542 |
if (!ioc->cached_fw) |
| 3543 |
return; |
| 3544 |
|
| 3545 |
sz = ioc->facts.FWImageSize; |
| 3546 |
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "free_fw_memory: FW Image @ %p[%p], sz=%d[%x] bytes\n", |
| 3547 |
ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz)); |
| 3548 |
dma_free_coherent(&ioc->pcidev->dev, sz, ioc->cached_fw, |
| 3549 |
ioc->cached_fw_dma); |
| 3550 |
ioc->alloc_total -= sz; |
| 3551 |
ioc->cached_fw = NULL; |
| 3552 |
} |
| 3553 |
|
| 3554 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 3555 |
/** |
| 3556 |
* mpt_do_upload - Construct and Send FWUpload request to MPT adapter port. |
| 3557 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 3558 |
* @sleepFlag: Specifies whether the process can sleep |
| 3559 |
* |
| 3560 |
* Returns 0 for success, >0 for handshake failure |
| 3561 |
* <0 for fw upload failure. |
| 3562 |
* |
| 3563 |
* Remark: If bound IOC and a successful FWUpload was performed |
| 3564 |
* on the bound IOC, the second image is discarded |
| 3565 |
* and memory is free'd. Both channels must upload to prevent |
| 3566 |
* IOC from running in degraded mode. |
| 3567 |
*/ |
| 3568 |
static int |
| 3569 |
mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag) |
| 3570 |
{ |
| 3571 |
u8 reply[sizeof(FWUploadReply_t)]; |
| 3572 |
FWUpload_t *prequest; |
| 3573 |
FWUploadReply_t *preply; |
| 3574 |
FWUploadTCSGE_t *ptcsge; |
| 3575 |
u32 flagsLength; |
| 3576 |
int ii, sz, reply_sz; |
| 3577 |
int cmdStatus; |
| 3578 |
int request_size; |
| 3579 |
/* If the image size is 0, we are done. |
| 3580 |
*/ |
| 3581 |
if ((sz = ioc->facts.FWImageSize) == 0) |
| 3582 |
return 0; |
| 3583 |
|
| 3584 |
if (mpt_alloc_fw_memory(ioc, ioc->facts.FWImageSize) != 0) |
| 3585 |
return -ENOMEM; |
| 3586 |
|
| 3587 |
dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": FW Image @ %p[%p], sz=%d[%x] bytes\n", |
| 3588 |
ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz)); |
| 3589 |
|
| 3590 |
prequest = (sleepFlag == NO_SLEEP) ? kzalloc(ioc->req_sz, GFP_ATOMIC) : |
| 3591 |
kzalloc(ioc->req_sz, GFP_KERNEL); |
| 3592 |
if (!prequest) { |
| 3593 |
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "fw upload failed " |
| 3594 |
"while allocating memory \n", ioc->name)); |
| 3595 |
mpt_free_fw_memory(ioc); |
| 3596 |
return -ENOMEM; |
| 3597 |
} |
| 3598 |
|
| 3599 |
preply = (FWUploadReply_t *)&reply; |
| 3600 |
|
| 3601 |
reply_sz = sizeof(reply); |
| 3602 |
memset(preply, 0, reply_sz); |
| 3603 |
|
| 3604 |
prequest->ImageType = MPI_FW_UPLOAD_ITYPE_FW_IOC_MEM; |
| 3605 |
prequest->Function = MPI_FUNCTION_FW_UPLOAD; |
| 3606 |
|
| 3607 |
ptcsge = (FWUploadTCSGE_t *) &prequest->SGL; |
| 3608 |
ptcsge->DetailsLength = 12; |
| 3609 |
ptcsge->Flags = MPI_SGE_FLAGS_TRANSACTION_ELEMENT; |
| 3610 |
ptcsge->ImageSize = cpu_to_le32(sz); |
| 3611 |
ptcsge++; |
| 3612 |
|
| 3613 |
flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ | sz; |
| 3614 |
ioc->add_sge((char *)ptcsge, flagsLength, ioc->cached_fw_dma); |
| 3615 |
request_size = offsetof(FWUpload_t, SGL) + sizeof(FWUploadTCSGE_t) + |
| 3616 |
ioc->SGE_size; |
| 3617 |
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending FW Upload " |
| 3618 |
" (req @ %p) fw_size=%d mf_request_size=%d\n", ioc->name, prequest, |
| 3619 |
ioc->facts.FWImageSize, request_size)); |
| 3620 |
DBG_DUMP_FW_REQUEST_FRAME(ioc, (u32 *)prequest); |
| 3621 |
|
| 3622 |
ii = mpt_handshake_req_reply_wait(ioc, request_size, (u32 *)prequest, |
| 3623 |
reply_sz, (u16 *)preply, 65 /*seconds*/, sleepFlag); |
| 3624 |
|
| 3625 |
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Upload completed " |
| 3626 |
"rc=%x \n", ioc->name, ii)); |
| 3627 |
|
| 3628 |
cmdStatus = -EFAULT; |
| 3629 |
if (ii == 0) { |
| 3630 |
/* Handshake transfer was complete and successful. |
| 3631 |
* Check the Reply Frame. |
| 3632 |
*/ |
| 3633 |
int status; |
| 3634 |
status = le16_to_cpu(preply->IOCStatus) & |
| 3635 |
MPI_IOCSTATUS_MASK; |
| 3636 |
if (status == MPI_IOCSTATUS_SUCCESS && |
| 3637 |
ioc->facts.FWImageSize == |
| 3638 |
le32_to_cpu(preply->ActualImageSize)) |
| 3639 |
cmdStatus = 0; |
| 3640 |
} |
| 3641 |
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": do_upload cmdStatus=%d \n", |
| 3642 |
ioc->name, cmdStatus)); |
| 3643 |
|
| 3644 |
|
| 3645 |
if (cmdStatus) { |
| 3646 |
ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "fw upload failed, " |
| 3647 |
"freeing image \n", ioc->name)); |
| 3648 |
mpt_free_fw_memory(ioc); |
| 3649 |
} |
| 3650 |
kfree(prequest); |
| 3651 |
|
| 3652 |
return cmdStatus; |
| 3653 |
} |
| 3654 |
|
| 3655 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 3656 |
/** |
| 3657 |
* mpt_downloadboot - DownloadBoot code |
| 3658 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 3659 |
* @pFwHeader: Pointer to firmware header info |
| 3660 |
* @sleepFlag: Specifies whether the process can sleep |
| 3661 |
* |
| 3662 |
* FwDownloadBoot requires Programmed IO access. |
| 3663 |
* |
| 3664 |
* Returns 0 for success |
| 3665 |
* -1 FW Image size is 0 |
| 3666 |
* -2 No valid cached_fw Pointer |
| 3667 |
* <0 for fw upload failure. |
| 3668 |
*/ |
| 3669 |
static int |
| 3670 |
mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag) |
| 3671 |
{ |
| 3672 |
MpiExtImageHeader_t *pExtImage; |
| 3673 |
u32 fwSize; |
| 3674 |
u32 diag0val; |
| 3675 |
int count; |
| 3676 |
u32 *ptrFw; |
| 3677 |
u32 diagRwData; |
| 3678 |
u32 nextImage; |
| 3679 |
u32 load_addr; |
| 3680 |
u32 ioc_state=0; |
| 3681 |
|
| 3682 |
ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot: fw size 0x%x (%d), FW Ptr %p\n", |
| 3683 |
ioc->name, pFwHeader->ImageSize, pFwHeader->ImageSize, pFwHeader)); |
| 3684 |
|
| 3685 |
CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF); |
| 3686 |
CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE); |
| 3687 |
CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE); |
| 3688 |
CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE); |
| 3689 |
CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE); |
| 3690 |
CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE); |
| 3691 |
|
| 3692 |
CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM)); |
| 3693 |
|
| 3694 |
/* wait 1 msec */ |
| 3695 |
if (sleepFlag == CAN_SLEEP) { |
| 3696 |
msleep(1); |
| 3697 |
} else { |
| 3698 |
mdelay (1); |
| 3699 |
} |
| 3700 |
|
| 3701 |
diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); |
| 3702 |
CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_RESET_ADAPTER); |
| 3703 |
|
| 3704 |
for (count = 0; count < 30; count ++) { |
| 3705 |
diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); |
| 3706 |
if (!(diag0val & MPI_DIAG_RESET_ADAPTER)) { |
| 3707 |
ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RESET_ADAPTER cleared, count=%d\n", |
| 3708 |
ioc->name, count)); |
| 3709 |
break; |
| 3710 |
} |
| 3711 |
/* wait .1 sec */ |
| 3712 |
if (sleepFlag == CAN_SLEEP) { |
| 3713 |
msleep (100); |
| 3714 |
} else { |
| 3715 |
mdelay (100); |
| 3716 |
} |
| 3717 |
} |
| 3718 |
|
| 3719 |
if ( count == 30 ) { |
| 3720 |
ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot failed! " |
| 3721 |
"Unable to get MPI_DIAG_DRWE mode, diag0val=%x\n", |
| 3722 |
ioc->name, diag0val)); |
| 3723 |
return -3; |
| 3724 |
} |
| 3725 |
|
| 3726 |
CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF); |
| 3727 |
CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE); |
| 3728 |
CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE); |
| 3729 |
CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE); |
| 3730 |
CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE); |
| 3731 |
CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE); |
| 3732 |
|
| 3733 |
/* Set the DiagRwEn and Disable ARM bits */ |
| 3734 |
CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_RW_ENABLE | MPI_DIAG_DISABLE_ARM)); |
| 3735 |
|
| 3736 |
fwSize = (pFwHeader->ImageSize + 3)/4; |
| 3737 |
ptrFw = (u32 *) pFwHeader; |
| 3738 |
|
| 3739 |
/* Write the LoadStartAddress to the DiagRw Address Register |
| 3740 |
* using Programmed IO |
| 3741 |
*/ |
| 3742 |
if (ioc->errata_flag_1064) |
| 3743 |
pci_enable_io_access(ioc->pcidev); |
| 3744 |
|
| 3745 |
CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, pFwHeader->LoadStartAddress); |
| 3746 |
ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "LoadStart addr written 0x%x \n", |
| 3747 |
ioc->name, pFwHeader->LoadStartAddress)); |
| 3748 |
|
| 3749 |
ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write FW Image: 0x%x bytes @ %p\n", |
| 3750 |
ioc->name, fwSize*4, ptrFw)); |
| 3751 |
while (fwSize--) { |
| 3752 |
CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, *ptrFw++); |
| 3753 |
} |
| 3754 |
|
| 3755 |
nextImage = pFwHeader->NextImageHeaderOffset; |
| 3756 |
while (nextImage) { |
| 3757 |
pExtImage = (MpiExtImageHeader_t *) ((char *)pFwHeader + nextImage); |
| 3758 |
|
| 3759 |
load_addr = pExtImage->LoadStartAddress; |
| 3760 |
|
| 3761 |
fwSize = (pExtImage->ImageSize + 3) >> 2; |
| 3762 |
ptrFw = (u32 *)pExtImage; |
| 3763 |
|
| 3764 |
ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write Ext Image: 0x%x (%d) bytes @ %p load_addr=%x\n", |
| 3765 |
ioc->name, fwSize*4, fwSize*4, ptrFw, load_addr)); |
| 3766 |
CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, load_addr); |
| 3767 |
|
| 3768 |
while (fwSize--) { |
| 3769 |
CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, *ptrFw++); |
| 3770 |
} |
| 3771 |
nextImage = pExtImage->NextImageHeaderOffset; |
| 3772 |
} |
| 3773 |
|
| 3774 |
/* Write the IopResetVectorRegAddr */ |
| 3775 |
ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write IopResetVector Addr=%x! \n", ioc->name, pFwHeader->IopResetRegAddr)); |
| 3776 |
CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, pFwHeader->IopResetRegAddr); |
| 3777 |
|
| 3778 |
/* Write the IopResetVectorValue */ |
| 3779 |
ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write IopResetVector Value=%x! \n", ioc->name, pFwHeader->IopResetVectorValue)); |
| 3780 |
CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, pFwHeader->IopResetVectorValue); |
| 3781 |
|
| 3782 |
/* Clear the internal flash bad bit - autoincrementing register, |
| 3783 |
* so must do two writes. |
| 3784 |
*/ |
| 3785 |
if (ioc->bus_type == SPI) { |
| 3786 |
/* |
| 3787 |
* 1030 and 1035 H/W errata, workaround to access |
| 3788 |
* the ClearFlashBadSignatureBit |
| 3789 |
*/ |
| 3790 |
CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000); |
| 3791 |
diagRwData = CHIPREG_PIO_READ32(&ioc->pio_chip->DiagRwData); |
| 3792 |
diagRwData |= 0x40000000; |
| 3793 |
CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000); |
| 3794 |
CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, diagRwData); |
| 3795 |
|
| 3796 |
} else /* if((ioc->bus_type == SAS) || (ioc->bus_type == FC)) */ { |
| 3797 |
diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); |
| 3798 |
CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | |
| 3799 |
MPI_DIAG_CLEAR_FLASH_BAD_SIG); |
| 3800 |
|
| 3801 |
/* wait 1 msec */ |
| 3802 |
if (sleepFlag == CAN_SLEEP) { |
| 3803 |
msleep (1); |
| 3804 |
} else { |
| 3805 |
mdelay (1); |
| 3806 |
} |
| 3807 |
} |
| 3808 |
|
| 3809 |
if (ioc->errata_flag_1064) |
| 3810 |
pci_disable_io_access(ioc->pcidev); |
| 3811 |
|
| 3812 |
diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); |
| 3813 |
ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot diag0val=%x, " |
| 3814 |
"turning off PREVENT_IOC_BOOT, DISABLE_ARM, RW_ENABLE\n", |
| 3815 |
ioc->name, diag0val)); |
| 3816 |
diag0val &= ~(MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM | MPI_DIAG_RW_ENABLE); |
| 3817 |
ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot now diag0val=%x\n", |
| 3818 |
ioc->name, diag0val)); |
| 3819 |
CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val); |
| 3820 |
|
| 3821 |
/* Write 0xFF to reset the sequencer */ |
| 3822 |
CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF); |
| 3823 |
|
| 3824 |
if (ioc->bus_type == SAS) { |
| 3825 |
ioc_state = mpt_GetIocState(ioc, 0); |
| 3826 |
if ( (GetIocFacts(ioc, sleepFlag, |
| 3827 |
MPT_HOSTEVENT_IOC_BRINGUP)) != 0 ) { |
| 3828 |
ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "GetIocFacts failed: IocState=%x\n", |
| 3829 |
ioc->name, ioc_state)); |
| 3830 |
return -EFAULT; |
| 3831 |
} |
| 3832 |
} |
| 3833 |
|
| 3834 |
for (count=0; count<HZ*20; count++) { |
| 3835 |
if ((ioc_state = mpt_GetIocState(ioc, 0)) & MPI_IOC_STATE_READY) { |
| 3836 |
ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 3837 |
"downloadboot successful! (count=%d) IocState=%x\n", |
| 3838 |
ioc->name, count, ioc_state)); |
| 3839 |
if (ioc->bus_type == SAS) { |
| 3840 |
return 0; |
| 3841 |
} |
| 3842 |
if ((SendIocInit(ioc, sleepFlag)) != 0) { |
| 3843 |
ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 3844 |
"downloadboot: SendIocInit failed\n", |
| 3845 |
ioc->name)); |
| 3846 |
return -EFAULT; |
| 3847 |
} |
| 3848 |
ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 3849 |
"downloadboot: SendIocInit successful\n", |
| 3850 |
ioc->name)); |
| 3851 |
return 0; |
| 3852 |
} |
| 3853 |
if (sleepFlag == CAN_SLEEP) { |
| 3854 |
msleep (10); |
| 3855 |
} else { |
| 3856 |
mdelay (10); |
| 3857 |
} |
| 3858 |
} |
| 3859 |
ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 3860 |
"downloadboot failed! IocState=%x\n",ioc->name, ioc_state)); |
| 3861 |
return -EFAULT; |
| 3862 |
} |
| 3863 |
|
| 3864 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 3865 |
/** |
| 3866 |
* KickStart - Perform hard reset of MPT adapter. |
| 3867 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 3868 |
* @force: Force hard reset |
| 3869 |
* @sleepFlag: Specifies whether the process can sleep |
| 3870 |
* |
| 3871 |
* This routine places MPT adapter in diagnostic mode via the |
| 3872 |
* WriteSequence register, and then performs a hard reset of adapter |
| 3873 |
* via the Diagnostic register. |
| 3874 |
* |
| 3875 |
* Inputs: sleepflag - CAN_SLEEP (non-interrupt thread) |
| 3876 |
* or NO_SLEEP (interrupt thread, use mdelay) |
| 3877 |
* force - 1 if doorbell active, board fault state |
| 3878 |
* board operational, IOC_RECOVERY or |
| 3879 |
* IOC_BRINGUP and there is an alt_ioc. |
| 3880 |
* 0 else |
| 3881 |
* |
| 3882 |
* Returns: |
| 3883 |
* 1 - hard reset, READY |
| 3884 |
* 0 - no reset due to History bit, READY |
| 3885 |
* -1 - no reset due to History bit but not READY |
| 3886 |
* OR reset but failed to come READY |
| 3887 |
* -2 - no reset, could not enter DIAG mode |
| 3888 |
* -3 - reset but bad FW bit |
| 3889 |
*/ |
| 3890 |
static int |
| 3891 |
KickStart(MPT_ADAPTER *ioc, int force, int sleepFlag) |
| 3892 |
{ |
| 3893 |
int hard_reset_done = 0; |
| 3894 |
u32 ioc_state=0; |
| 3895 |
int cnt,cntdn; |
| 3896 |
|
| 3897 |
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "KickStarting!\n", ioc->name)); |
| 3898 |
if (ioc->bus_type == SPI) { |
| 3899 |
/* Always issue a Msg Unit Reset first. This will clear some |
| 3900 |
* SCSI bus hang conditions. |
| 3901 |
*/ |
| 3902 |
SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag); |
| 3903 |
|
| 3904 |
if (sleepFlag == CAN_SLEEP) { |
| 3905 |
msleep (1000); |
| 3906 |
} else { |
| 3907 |
mdelay (1000); |
| 3908 |
} |
| 3909 |
} |
| 3910 |
|
| 3911 |
hard_reset_done = mpt_diag_reset(ioc, force, sleepFlag); |
| 3912 |
if (hard_reset_done < 0) |
| 3913 |
return hard_reset_done; |
| 3914 |
|
| 3915 |
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Diagnostic reset successful!\n", |
| 3916 |
ioc->name)); |
| 3917 |
|
| 3918 |
cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 2; /* 2 seconds */ |
| 3919 |
for (cnt=0; cnt<cntdn; cnt++) { |
| 3920 |
ioc_state = mpt_GetIocState(ioc, 1); |
| 3921 |
if ((ioc_state == MPI_IOC_STATE_READY) || (ioc_state == MPI_IOC_STATE_OPERATIONAL)) { |
| 3922 |
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "KickStart successful! (cnt=%d)\n", |
| 3923 |
ioc->name, cnt)); |
| 3924 |
return hard_reset_done; |
| 3925 |
} |
| 3926 |
if (sleepFlag == CAN_SLEEP) { |
| 3927 |
msleep (10); |
| 3928 |
} else { |
| 3929 |
mdelay (10); |
| 3930 |
} |
| 3931 |
} |
| 3932 |
|
| 3933 |
dinitprintk(ioc, printk(MYIOC_s_ERR_FMT "Failed to come READY after reset! IocState=%x\n", |
| 3934 |
ioc->name, mpt_GetIocState(ioc, 0))); |
| 3935 |
return -1; |
| 3936 |
} |
| 3937 |
|
| 3938 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 3939 |
/** |
| 3940 |
* mpt_diag_reset - Perform hard reset of the adapter. |
| 3941 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 3942 |
* @ignore: Set if to honor and clear to ignore |
| 3943 |
* the reset history bit |
| 3944 |
* @sleepFlag: CAN_SLEEP if called in a non-interrupt thread, |
| 3945 |
* else set to NO_SLEEP (use mdelay instead) |
| 3946 |
* |
| 3947 |
* This routine places the adapter in diagnostic mode via the |
| 3948 |
* WriteSequence register and then performs a hard reset of adapter |
| 3949 |
* via the Diagnostic register. Adapter should be in ready state |
| 3950 |
* upon successful completion. |
| 3951 |
* |
| 3952 |
* Returns: 1 hard reset successful |
| 3953 |
* 0 no reset performed because reset history bit set |
| 3954 |
* -2 enabling diagnostic mode failed |
| 3955 |
* -3 diagnostic reset failed |
| 3956 |
*/ |
| 3957 |
static int |
| 3958 |
mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag) |
| 3959 |
{ |
| 3960 |
u32 diag0val; |
| 3961 |
u32 doorbell; |
| 3962 |
int hard_reset_done = 0; |
| 3963 |
int count = 0; |
| 3964 |
u32 diag1val = 0; |
| 3965 |
MpiFwHeader_t *cached_fw; /* Pointer to FW */ |
| 3966 |
u8 cb_idx; |
| 3967 |
|
| 3968 |
/* Clear any existing interrupts */ |
| 3969 |
CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); |
| 3970 |
|
| 3971 |
if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078) { |
| 3972 |
|
| 3973 |
if (!ignore) |
| 3974 |
return 0; |
| 3975 |
|
| 3976 |
drsprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: Doorbell=%p; 1078 reset " |
| 3977 |
"address=%p\n", ioc->name, __func__, |
| 3978 |
&ioc->chip->Doorbell, &ioc->chip->Reset_1078)); |
| 3979 |
CHIPREG_WRITE32(&ioc->chip->Reset_1078, 0x07); |
| 3980 |
if (sleepFlag == CAN_SLEEP) |
| 3981 |
msleep(1); |
| 3982 |
else |
| 3983 |
mdelay(1); |
| 3984 |
|
| 3985 |
/* |
| 3986 |
* Call each currently registered protocol IOC reset handler |
| 3987 |
* with pre-reset indication. |
| 3988 |
* NOTE: If we're doing _IOC_BRINGUP, there can be no |
| 3989 |
* MptResetHandlers[] registered yet. |
| 3990 |
*/ |
| 3991 |
for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { |
| 3992 |
if (MptResetHandlers[cb_idx]) |
| 3993 |
(*(MptResetHandlers[cb_idx]))(ioc, |
| 3994 |
MPT_IOC_PRE_RESET); |
| 3995 |
} |
| 3996 |
|
| 3997 |
for (count = 0; count < 60; count ++) { |
| 3998 |
doorbell = CHIPREG_READ32(&ioc->chip->Doorbell); |
| 3999 |
doorbell &= MPI_IOC_STATE_MASK; |
| 4000 |
|
| 4001 |
drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 4002 |
"looking for READY STATE: doorbell=%x" |
| 4003 |
" count=%d\n", |
| 4004 |
ioc->name, doorbell, count)); |
| 4005 |
|
| 4006 |
if (doorbell == MPI_IOC_STATE_READY) { |
| 4007 |
return 1; |
| 4008 |
} |
| 4009 |
|
| 4010 |
/* wait 1 sec */ |
| 4011 |
if (sleepFlag == CAN_SLEEP) |
| 4012 |
msleep(1000); |
| 4013 |
else |
| 4014 |
mdelay(1000); |
| 4015 |
} |
| 4016 |
return -1; |
| 4017 |
} |
| 4018 |
|
| 4019 |
/* Use "Diagnostic reset" method! (only thing available!) */ |
| 4020 |
diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); |
| 4021 |
|
| 4022 |
if (ioc->debug_level & MPT_DEBUG) { |
| 4023 |
if (ioc->alt_ioc) |
| 4024 |
diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic); |
| 4025 |
dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG1: diag0=%08x, diag1=%08x\n", |
| 4026 |
ioc->name, diag0val, diag1val)); |
| 4027 |
} |
| 4028 |
|
| 4029 |
/* Do the reset if we are told to ignore the reset history |
| 4030 |
* or if the reset history is 0 |
| 4031 |
*/ |
| 4032 |
if (ignore || !(diag0val & MPI_DIAG_RESET_HISTORY)) { |
| 4033 |
while ((diag0val & MPI_DIAG_DRWE) == 0) { |
| 4034 |
/* Write magic sequence to WriteSequence register |
| 4035 |
* Loop until in diagnostic mode |
| 4036 |
*/ |
| 4037 |
CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF); |
| 4038 |
CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE); |
| 4039 |
CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE); |
| 4040 |
CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE); |
| 4041 |
CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE); |
| 4042 |
CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE); |
| 4043 |
|
| 4044 |
/* wait 100 msec */ |
| 4045 |
if (sleepFlag == CAN_SLEEP) { |
| 4046 |
msleep (100); |
| 4047 |
} else { |
| 4048 |
mdelay (100); |
| 4049 |
} |
| 4050 |
|
| 4051 |
count++; |
| 4052 |
if (count > 20) { |
| 4053 |
printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n", |
| 4054 |
ioc->name, diag0val); |
| 4055 |
return -2; |
| 4056 |
|
| 4057 |
} |
| 4058 |
|
| 4059 |
diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); |
| 4060 |
|
| 4061 |
dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Wrote magic DiagWriteEn sequence (%x)\n", |
| 4062 |
ioc->name, diag0val)); |
| 4063 |
} |
| 4064 |
|
| 4065 |
if (ioc->debug_level & MPT_DEBUG) { |
| 4066 |
if (ioc->alt_ioc) |
| 4067 |
diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic); |
| 4068 |
dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG2: diag0=%08x, diag1=%08x\n", |
| 4069 |
ioc->name, diag0val, diag1val)); |
| 4070 |
} |
| 4071 |
/* |
| 4072 |
* Disable the ARM (Bug fix) |
| 4073 |
* |
| 4074 |
*/ |
| 4075 |
CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_DISABLE_ARM); |
| 4076 |
mdelay(1); |
| 4077 |
|
| 4078 |
/* |
| 4079 |
* Now hit the reset bit in the Diagnostic register |
| 4080 |
* (THE BIG HAMMER!) (Clears DRWE bit). |
| 4081 |
*/ |
| 4082 |
CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_RESET_ADAPTER); |
| 4083 |
hard_reset_done = 1; |
| 4084 |
dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Diagnostic reset performed\n", |
| 4085 |
ioc->name)); |
| 4086 |
|
| 4087 |
/* |
| 4088 |
* Call each currently registered protocol IOC reset handler |
| 4089 |
* with pre-reset indication. |
| 4090 |
* NOTE: If we're doing _IOC_BRINGUP, there can be no |
| 4091 |
* MptResetHandlers[] registered yet. |
| 4092 |
*/ |
| 4093 |
for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { |
| 4094 |
if (MptResetHandlers[cb_idx]) { |
| 4095 |
mpt_signal_reset(cb_idx, |
| 4096 |
ioc, MPT_IOC_PRE_RESET); |
| 4097 |
if (ioc->alt_ioc) { |
| 4098 |
mpt_signal_reset(cb_idx, |
| 4099 |
ioc->alt_ioc, MPT_IOC_PRE_RESET); |
| 4100 |
} |
| 4101 |
} |
| 4102 |
} |
| 4103 |
|
| 4104 |
if (ioc->cached_fw) |
| 4105 |
cached_fw = (MpiFwHeader_t *)ioc->cached_fw; |
| 4106 |
else if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) |
| 4107 |
cached_fw = (MpiFwHeader_t *)ioc->alt_ioc->cached_fw; |
| 4108 |
else |
| 4109 |
cached_fw = NULL; |
| 4110 |
if (cached_fw) { |
| 4111 |
/* If the DownloadBoot operation fails, the |
| 4112 |
* IOC will be left unusable. This is a fatal error |
| 4113 |
* case. _diag_reset will return < 0 |
| 4114 |
*/ |
| 4115 |
for (count = 0; count < 30; count ++) { |
| 4116 |
diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); |
| 4117 |
if (!(diag0val & MPI_DIAG_RESET_ADAPTER)) { |
| 4118 |
break; |
| 4119 |
} |
| 4120 |
|
| 4121 |
dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "cached_fw: diag0val=%x count=%d\n", |
| 4122 |
ioc->name, diag0val, count)); |
| 4123 |
/* wait 1 sec */ |
| 4124 |
if (sleepFlag == CAN_SLEEP) { |
| 4125 |
msleep (1000); |
| 4126 |
} else { |
| 4127 |
mdelay (1000); |
| 4128 |
} |
| 4129 |
} |
| 4130 |
if ((count = mpt_downloadboot(ioc, cached_fw, sleepFlag)) < 0) { |
| 4131 |
printk(MYIOC_s_WARN_FMT |
| 4132 |
"firmware downloadboot failure (%d)!\n", ioc->name, count); |
| 4133 |
} |
| 4134 |
|
| 4135 |
} else { |
| 4136 |
/* Wait for FW to reload and for board |
| 4137 |
* to go to the READY state. |
| 4138 |
* Maximum wait is 60 seconds. |
| 4139 |
* If fail, no error will check again |
| 4140 |
* with calling program. |
| 4141 |
*/ |
| 4142 |
for (count = 0; count < 60; count ++) { |
| 4143 |
doorbell = CHIPREG_READ32(&ioc->chip->Doorbell); |
| 4144 |
doorbell &= MPI_IOC_STATE_MASK; |
| 4145 |
|
| 4146 |
drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 4147 |
"looking for READY STATE: doorbell=%x" |
| 4148 |
" count=%d\n", ioc->name, doorbell, count)); |
| 4149 |
|
| 4150 |
if (doorbell == MPI_IOC_STATE_READY) { |
| 4151 |
break; |
| 4152 |
} |
| 4153 |
|
| 4154 |
/* wait 1 sec */ |
| 4155 |
if (sleepFlag == CAN_SLEEP) { |
| 4156 |
msleep (1000); |
| 4157 |
} else { |
| 4158 |
mdelay (1000); |
| 4159 |
} |
| 4160 |
} |
| 4161 |
|
| 4162 |
if (doorbell != MPI_IOC_STATE_READY) |
| 4163 |
printk(MYIOC_s_ERR_FMT "Failed to come READY " |
| 4164 |
"after reset! IocState=%x", ioc->name, |
| 4165 |
doorbell); |
| 4166 |
} |
| 4167 |
} |
| 4168 |
|
| 4169 |
diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); |
| 4170 |
if (ioc->debug_level & MPT_DEBUG) { |
| 4171 |
if (ioc->alt_ioc) |
| 4172 |
diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic); |
| 4173 |
dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG3: diag0=%08x, diag1=%08x\n", |
| 4174 |
ioc->name, diag0val, diag1val)); |
| 4175 |
} |
| 4176 |
|
| 4177 |
/* Clear RESET_HISTORY bit! Place board in the |
| 4178 |
* diagnostic mode to update the diag register. |
| 4179 |
*/ |
| 4180 |
diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); |
| 4181 |
count = 0; |
| 4182 |
while ((diag0val & MPI_DIAG_DRWE) == 0) { |
| 4183 |
/* Write magic sequence to WriteSequence register |
| 4184 |
* Loop until in diagnostic mode |
| 4185 |
*/ |
| 4186 |
CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF); |
| 4187 |
CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE); |
| 4188 |
CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE); |
| 4189 |
CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE); |
| 4190 |
CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE); |
| 4191 |
CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE); |
| 4192 |
|
| 4193 |
/* wait 100 msec */ |
| 4194 |
if (sleepFlag == CAN_SLEEP) { |
| 4195 |
msleep (100); |
| 4196 |
} else { |
| 4197 |
mdelay (100); |
| 4198 |
} |
| 4199 |
|
| 4200 |
count++; |
| 4201 |
if (count > 20) { |
| 4202 |
printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n", |
| 4203 |
ioc->name, diag0val); |
| 4204 |
break; |
| 4205 |
} |
| 4206 |
diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); |
| 4207 |
} |
| 4208 |
diag0val &= ~MPI_DIAG_RESET_HISTORY; |
| 4209 |
CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val); |
| 4210 |
diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); |
| 4211 |
if (diag0val & MPI_DIAG_RESET_HISTORY) { |
| 4212 |
printk(MYIOC_s_WARN_FMT "ResetHistory bit failed to clear!\n", |
| 4213 |
ioc->name); |
| 4214 |
} |
| 4215 |
|
| 4216 |
/* Disable Diagnostic Mode |
| 4217 |
*/ |
| 4218 |
CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFFFFFFFF); |
| 4219 |
|
| 4220 |
/* Check FW reload status flags. |
| 4221 |
*/ |
| 4222 |
diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); |
| 4223 |
if (diag0val & (MPI_DIAG_FLASH_BAD_SIG | MPI_DIAG_RESET_ADAPTER | MPI_DIAG_DISABLE_ARM)) { |
| 4224 |
printk(MYIOC_s_ERR_FMT "Diagnostic reset FAILED! (%02xh)\n", |
| 4225 |
ioc->name, diag0val); |
| 4226 |
return -3; |
| 4227 |
} |
| 4228 |
|
| 4229 |
if (ioc->debug_level & MPT_DEBUG) { |
| 4230 |
if (ioc->alt_ioc) |
| 4231 |
diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic); |
| 4232 |
dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG4: diag0=%08x, diag1=%08x\n", |
| 4233 |
ioc->name, diag0val, diag1val)); |
| 4234 |
} |
| 4235 |
|
| 4236 |
/* |
| 4237 |
* Reset flag that says we've enabled event notification |
| 4238 |
*/ |
| 4239 |
ioc->facts.EventState = 0; |
| 4240 |
|
| 4241 |
if (ioc->alt_ioc) |
| 4242 |
ioc->alt_ioc->facts.EventState = 0; |
| 4243 |
|
| 4244 |
return hard_reset_done; |
| 4245 |
} |
| 4246 |
|
| 4247 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 4248 |
/** |
| 4249 |
* SendIocReset - Send IOCReset request to MPT adapter. |
| 4250 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 4251 |
* @reset_type: reset type, expected values are |
| 4252 |
* %MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET or %MPI_FUNCTION_IO_UNIT_RESET |
| 4253 |
* @sleepFlag: Specifies whether the process can sleep |
| 4254 |
* |
| 4255 |
* Send IOCReset request to the MPT adapter. |
| 4256 |
* |
| 4257 |
* Returns 0 for success, non-zero for failure. |
| 4258 |
*/ |
| 4259 |
static int |
| 4260 |
SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag) |
| 4261 |
{ |
| 4262 |
int r; |
| 4263 |
u32 state; |
| 4264 |
int cntdn, count; |
| 4265 |
|
| 4266 |
drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending IOC reset(0x%02x)!\n", |
| 4267 |
ioc->name, reset_type)); |
| 4268 |
CHIPREG_WRITE32(&ioc->chip->Doorbell, reset_type<<MPI_DOORBELL_FUNCTION_SHIFT); |
| 4269 |
if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) |
| 4270 |
return r; |
| 4271 |
|
| 4272 |
/* FW ACK'd request, wait for READY state |
| 4273 |
*/ |
| 4274 |
count = 0; |
| 4275 |
cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 15; /* 15 seconds */ |
| 4276 |
|
| 4277 |
while ((state = mpt_GetIocState(ioc, 1)) != MPI_IOC_STATE_READY) { |
| 4278 |
cntdn--; |
| 4279 |
count++; |
| 4280 |
if (!cntdn) { |
| 4281 |
if (sleepFlag != CAN_SLEEP) |
| 4282 |
count *= 10; |
| 4283 |
|
| 4284 |
printk(MYIOC_s_ERR_FMT |
| 4285 |
"Wait IOC_READY state (0x%x) timeout(%d)!\n", |
| 4286 |
ioc->name, state, (int)((count+5)/HZ)); |
| 4287 |
return -ETIME; |
| 4288 |
} |
| 4289 |
|
| 4290 |
if (sleepFlag == CAN_SLEEP) { |
| 4291 |
msleep(1); |
| 4292 |
} else { |
| 4293 |
mdelay (1); /* 1 msec delay */ |
| 4294 |
} |
| 4295 |
} |
| 4296 |
|
| 4297 |
/* TODO! |
| 4298 |
* Cleanup all event stuff for this IOC; re-issue EventNotification |
| 4299 |
* request if needed. |
| 4300 |
*/ |
| 4301 |
if (ioc->facts.Function) |
| 4302 |
ioc->facts.EventState = 0; |
| 4303 |
|
| 4304 |
return 0; |
| 4305 |
} |
| 4306 |
|
| 4307 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 4308 |
/** |
| 4309 |
* initChainBuffers - Allocate memory for and initialize chain buffers |
| 4310 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 4311 |
* |
| 4312 |
* Allocates memory for and initializes chain buffers, |
| 4313 |
* chain buffer control arrays and spinlock. |
| 4314 |
*/ |
| 4315 |
static int |
| 4316 |
initChainBuffers(MPT_ADAPTER *ioc) |
| 4317 |
{ |
| 4318 |
u8 *mem; |
| 4319 |
int sz, ii, num_chain; |
| 4320 |
int scale, num_sge, numSGE; |
| 4321 |
|
| 4322 |
/* ReqToChain size must equal the req_depth |
| 4323 |
* index = req_idx |
| 4324 |
*/ |
| 4325 |
if (ioc->ReqToChain == NULL) { |
| 4326 |
sz = ioc->req_depth * sizeof(int); |
| 4327 |
mem = kmalloc(sz, GFP_ATOMIC); |
| 4328 |
if (mem == NULL) |
| 4329 |
return -1; |
| 4330 |
|
| 4331 |
ioc->ReqToChain = (int *) mem; |
| 4332 |
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReqToChain alloc @ %p, sz=%d bytes\n", |
| 4333 |
ioc->name, mem, sz)); |
| 4334 |
mem = kmalloc(sz, GFP_ATOMIC); |
| 4335 |
if (mem == NULL) |
| 4336 |
return -1; |
| 4337 |
|
| 4338 |
ioc->RequestNB = (int *) mem; |
| 4339 |
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestNB alloc @ %p, sz=%d bytes\n", |
| 4340 |
ioc->name, mem, sz)); |
| 4341 |
} |
| 4342 |
for (ii = 0; ii < ioc->req_depth; ii++) { |
| 4343 |
ioc->ReqToChain[ii] = MPT_HOST_NO_CHAIN; |
| 4344 |
} |
| 4345 |
|
| 4346 |
/* ChainToChain size must equal the total number |
| 4347 |
* of chain buffers to be allocated. |
| 4348 |
* index = chain_idx |
| 4349 |
* |
| 4350 |
* Calculate the number of chain buffers needed(plus 1) per I/O |
| 4351 |
* then multiply the maximum number of simultaneous cmds |
| 4352 |
* |
| 4353 |
* num_sge = num sge in request frame + last chain buffer |
| 4354 |
* scale = num sge per chain buffer if no chain element |
| 4355 |
*/ |
| 4356 |
scale = ioc->req_sz / ioc->SGE_size; |
| 4357 |
if (ioc->sg_addr_size == sizeof(u64)) |
| 4358 |
num_sge = scale + (ioc->req_sz - 60) / ioc->SGE_size; |
| 4359 |
else |
| 4360 |
num_sge = 1 + scale + (ioc->req_sz - 64) / ioc->SGE_size; |
| 4361 |
|
| 4362 |
if (ioc->sg_addr_size == sizeof(u64)) { |
| 4363 |
numSGE = (scale - 1) * (ioc->facts.MaxChainDepth-1) + scale + |
| 4364 |
(ioc->req_sz - 60) / ioc->SGE_size; |
| 4365 |
} else { |
| 4366 |
numSGE = 1 + (scale - 1) * (ioc->facts.MaxChainDepth-1) + |
| 4367 |
scale + (ioc->req_sz - 64) / ioc->SGE_size; |
| 4368 |
} |
| 4369 |
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "num_sge=%d numSGE=%d\n", |
| 4370 |
ioc->name, num_sge, numSGE)); |
| 4371 |
|
| 4372 |
if (ioc->bus_type == FC) { |
| 4373 |
if (numSGE > MPT_SCSI_FC_SG_DEPTH) |
| 4374 |
numSGE = MPT_SCSI_FC_SG_DEPTH; |
| 4375 |
} else { |
| 4376 |
if (numSGE > MPT_SCSI_SG_DEPTH) |
| 4377 |
numSGE = MPT_SCSI_SG_DEPTH; |
| 4378 |
} |
| 4379 |
|
| 4380 |
num_chain = 1; |
| 4381 |
while (numSGE - num_sge > 0) { |
| 4382 |
num_chain++; |
| 4383 |
num_sge += (scale - 1); |
| 4384 |
} |
| 4385 |
num_chain++; |
| 4386 |
|
| 4387 |
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Now numSGE=%d num_sge=%d num_chain=%d\n", |
| 4388 |
ioc->name, numSGE, num_sge, num_chain)); |
| 4389 |
|
| 4390 |
if (ioc->bus_type == SPI) |
| 4391 |
num_chain *= MPT_SCSI_CAN_QUEUE; |
| 4392 |
else if (ioc->bus_type == SAS) |
| 4393 |
num_chain *= MPT_SAS_CAN_QUEUE; |
| 4394 |
else |
| 4395 |
num_chain *= MPT_FC_CAN_QUEUE; |
| 4396 |
|
| 4397 |
ioc->num_chain = num_chain; |
| 4398 |
|
| 4399 |
sz = num_chain * sizeof(int); |
| 4400 |
if (ioc->ChainToChain == NULL) { |
| 4401 |
mem = kmalloc(sz, GFP_ATOMIC); |
| 4402 |
if (mem == NULL) |
| 4403 |
return -1; |
| 4404 |
|
| 4405 |
ioc->ChainToChain = (int *) mem; |
| 4406 |
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainToChain alloc @ %p, sz=%d bytes\n", |
| 4407 |
ioc->name, mem, sz)); |
| 4408 |
} else { |
| 4409 |
mem = (u8 *) ioc->ChainToChain; |
| 4410 |
} |
| 4411 |
memset(mem, 0xFF, sz); |
| 4412 |
return num_chain; |
| 4413 |
} |
| 4414 |
|
| 4415 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 4416 |
/** |
| 4417 |
* PrimeIocFifos - Initialize IOC request and reply FIFOs. |
| 4418 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 4419 |
* |
| 4420 |
* This routine allocates memory for the MPT reply and request frame |
| 4421 |
* pools (if necessary), and primes the IOC reply FIFO with |
| 4422 |
* reply frames. |
| 4423 |
* |
| 4424 |
* Returns 0 for success, non-zero for failure. |
| 4425 |
*/ |
| 4426 |
static int |
| 4427 |
PrimeIocFifos(MPT_ADAPTER *ioc) |
| 4428 |
{ |
| 4429 |
MPT_FRAME_HDR *mf; |
| 4430 |
unsigned long flags; |
| 4431 |
dma_addr_t alloc_dma; |
| 4432 |
u8 *mem; |
| 4433 |
int i, reply_sz, sz, total_size, num_chain; |
| 4434 |
u64 dma_mask; |
| 4435 |
|
| 4436 |
dma_mask = 0; |
| 4437 |
|
| 4438 |
/* Prime reply FIFO... */ |
| 4439 |
|
| 4440 |
if (ioc->reply_frames == NULL) { |
| 4441 |
if ( (num_chain = initChainBuffers(ioc)) < 0) |
| 4442 |
return -1; |
| 4443 |
/* |
| 4444 |
* 1078 errata workaround for the 36GB limitation |
| 4445 |
*/ |
| 4446 |
if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078 && |
| 4447 |
ioc->dma_mask > DMA_BIT_MASK(35)) { |
| 4448 |
if (!dma_set_mask(&ioc->pcidev->dev, DMA_BIT_MASK(32)) |
| 4449 |
&& !dma_set_coherent_mask(&ioc->pcidev->dev, DMA_BIT_MASK(32))) { |
| 4450 |
dma_mask = DMA_BIT_MASK(35); |
| 4451 |
d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 4452 |
"setting 35 bit addressing for " |
| 4453 |
"Request/Reply/Chain and Sense Buffers\n", |
| 4454 |
ioc->name)); |
| 4455 |
} else { |
| 4456 |
/*Reseting DMA mask to 64 bit*/ |
| 4457 |
dma_set_mask(&ioc->pcidev->dev, |
| 4458 |
DMA_BIT_MASK(64)); |
| 4459 |
dma_set_coherent_mask(&ioc->pcidev->dev, |
| 4460 |
DMA_BIT_MASK(64)); |
| 4461 |
|
| 4462 |
printk(MYIOC_s_ERR_FMT |
| 4463 |
"failed setting 35 bit addressing for " |
| 4464 |
"Request/Reply/Chain and Sense Buffers\n", |
| 4465 |
ioc->name); |
| 4466 |
return -1; |
| 4467 |
} |
| 4468 |
} |
| 4469 |
|
| 4470 |
total_size = reply_sz = (ioc->reply_sz * ioc->reply_depth); |
| 4471 |
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffer sz=%d bytes, ReplyDepth=%d\n", |
| 4472 |
ioc->name, ioc->reply_sz, ioc->reply_depth)); |
| 4473 |
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffer sz=%d[%x] bytes\n", |
| 4474 |
ioc->name, reply_sz, reply_sz)); |
| 4475 |
|
| 4476 |
sz = (ioc->req_sz * ioc->req_depth); |
| 4477 |
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffer sz=%d bytes, RequestDepth=%d\n", |
| 4478 |
ioc->name, ioc->req_sz, ioc->req_depth)); |
| 4479 |
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffer sz=%d[%x] bytes\n", |
| 4480 |
ioc->name, sz, sz)); |
| 4481 |
total_size += sz; |
| 4482 |
|
| 4483 |
sz = num_chain * ioc->req_sz; /* chain buffer pool size */ |
| 4484 |
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffer sz=%d bytes, ChainDepth=%d\n", |
| 4485 |
ioc->name, ioc->req_sz, num_chain)); |
| 4486 |
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffer sz=%d[%x] bytes num_chain=%d\n", |
| 4487 |
ioc->name, sz, sz, num_chain)); |
| 4488 |
|
| 4489 |
total_size += sz; |
| 4490 |
mem = dma_alloc_coherent(&ioc->pcidev->dev, total_size, |
| 4491 |
&alloc_dma, GFP_KERNEL); |
| 4492 |
if (mem == NULL) { |
| 4493 |
printk(MYIOC_s_ERR_FMT "Unable to allocate Reply, Request, Chain Buffers!\n", |
| 4494 |
ioc->name); |
| 4495 |
goto out_fail; |
| 4496 |
} |
| 4497 |
|
| 4498 |
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Total alloc @ %p[%p], sz=%d[%x] bytes\n", |
| 4499 |
ioc->name, mem, (void *)(ulong)alloc_dma, total_size, total_size)); |
| 4500 |
|
| 4501 |
memset(mem, 0, total_size); |
| 4502 |
ioc->alloc_total += total_size; |
| 4503 |
ioc->alloc = mem; |
| 4504 |
ioc->alloc_dma = alloc_dma; |
| 4505 |
ioc->alloc_sz = total_size; |
| 4506 |
ioc->reply_frames = (MPT_FRAME_HDR *) mem; |
| 4507 |
ioc->reply_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF); |
| 4508 |
|
| 4509 |
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffers @ %p[%p]\n", |
| 4510 |
ioc->name, ioc->reply_frames, (void *)(ulong)alloc_dma)); |
| 4511 |
|
| 4512 |
alloc_dma += reply_sz; |
| 4513 |
mem += reply_sz; |
| 4514 |
|
| 4515 |
/* Request FIFO - WE manage this! */ |
| 4516 |
|
| 4517 |
ioc->req_frames = (MPT_FRAME_HDR *) mem; |
| 4518 |
ioc->req_frames_dma = alloc_dma; |
| 4519 |
|
| 4520 |
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffers @ %p[%p]\n", |
| 4521 |
ioc->name, mem, (void *)(ulong)alloc_dma)); |
| 4522 |
|
| 4523 |
ioc->req_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF); |
| 4524 |
|
| 4525 |
for (i = 0; i < ioc->req_depth; i++) { |
| 4526 |
alloc_dma += ioc->req_sz; |
| 4527 |
mem += ioc->req_sz; |
| 4528 |
} |
| 4529 |
|
| 4530 |
ioc->ChainBuffer = mem; |
| 4531 |
ioc->ChainBufferDMA = alloc_dma; |
| 4532 |
|
| 4533 |
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffers @ %p(%p)\n", |
| 4534 |
ioc->name, ioc->ChainBuffer, (void *)(ulong)ioc->ChainBufferDMA)); |
| 4535 |
|
| 4536 |
/* Initialize the free chain Q. |
| 4537 |
*/ |
| 4538 |
|
| 4539 |
INIT_LIST_HEAD(&ioc->FreeChainQ); |
| 4540 |
|
| 4541 |
/* Post the chain buffers to the FreeChainQ. |
| 4542 |
*/ |
| 4543 |
mem = (u8 *)ioc->ChainBuffer; |
| 4544 |
for (i=0; i < num_chain; i++) { |
| 4545 |
mf = (MPT_FRAME_HDR *) mem; |
| 4546 |
list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeChainQ); |
| 4547 |
mem += ioc->req_sz; |
| 4548 |
} |
| 4549 |
|
| 4550 |
/* Initialize Request frames linked list |
| 4551 |
*/ |
| 4552 |
alloc_dma = ioc->req_frames_dma; |
| 4553 |
mem = (u8 *) ioc->req_frames; |
| 4554 |
|
| 4555 |
spin_lock_irqsave(&ioc->FreeQlock, flags); |
| 4556 |
INIT_LIST_HEAD(&ioc->FreeQ); |
| 4557 |
for (i = 0; i < ioc->req_depth; i++) { |
| 4558 |
mf = (MPT_FRAME_HDR *) mem; |
| 4559 |
|
| 4560 |
/* Queue REQUESTs *internally*! */ |
| 4561 |
list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeQ); |
| 4562 |
|
| 4563 |
mem += ioc->req_sz; |
| 4564 |
} |
| 4565 |
spin_unlock_irqrestore(&ioc->FreeQlock, flags); |
| 4566 |
|
| 4567 |
sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC); |
| 4568 |
ioc->sense_buf_pool = dma_alloc_coherent(&ioc->pcidev->dev, sz, |
| 4569 |
&ioc->sense_buf_pool_dma, GFP_KERNEL); |
| 4570 |
if (ioc->sense_buf_pool == NULL) { |
| 4571 |
printk(MYIOC_s_ERR_FMT "Unable to allocate Sense Buffers!\n", |
| 4572 |
ioc->name); |
| 4573 |
goto out_fail; |
| 4574 |
} |
| 4575 |
|
| 4576 |
ioc->sense_buf_low_dma = (u32) (ioc->sense_buf_pool_dma & 0xFFFFFFFF); |
| 4577 |
ioc->alloc_total += sz; |
| 4578 |
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SenseBuffers @ %p[%p]\n", |
| 4579 |
ioc->name, ioc->sense_buf_pool, (void *)(ulong)ioc->sense_buf_pool_dma)); |
| 4580 |
|
| 4581 |
} |
| 4582 |
|
| 4583 |
/* Post Reply frames to FIFO |
| 4584 |
*/ |
| 4585 |
alloc_dma = ioc->alloc_dma; |
| 4586 |
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffers @ %p[%p]\n", |
| 4587 |
ioc->name, ioc->reply_frames, (void *)(ulong)alloc_dma)); |
| 4588 |
|
| 4589 |
for (i = 0; i < ioc->reply_depth; i++) { |
| 4590 |
/* Write each address to the IOC! */ |
| 4591 |
CHIPREG_WRITE32(&ioc->chip->ReplyFifo, alloc_dma); |
| 4592 |
alloc_dma += ioc->reply_sz; |
| 4593 |
} |
| 4594 |
|
| 4595 |
if (dma_mask == DMA_BIT_MASK(35) && !dma_set_mask(&ioc->pcidev->dev, |
| 4596 |
ioc->dma_mask) && !dma_set_coherent_mask(&ioc->pcidev->dev, |
| 4597 |
ioc->dma_mask)) |
| 4598 |
d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 4599 |
"restoring 64 bit addressing\n", ioc->name)); |
| 4600 |
|
| 4601 |
return 0; |
| 4602 |
|
| 4603 |
out_fail: |
| 4604 |
|
| 4605 |
if (ioc->alloc != NULL) { |
| 4606 |
sz = ioc->alloc_sz; |
| 4607 |
dma_free_coherent(&ioc->pcidev->dev, sz, ioc->alloc, |
| 4608 |
ioc->alloc_dma); |
| 4609 |
ioc->reply_frames = NULL; |
| 4610 |
ioc->req_frames = NULL; |
| 4611 |
ioc->alloc_total -= sz; |
| 4612 |
} |
| 4613 |
if (ioc->sense_buf_pool != NULL) { |
| 4614 |
sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC); |
| 4615 |
dma_free_coherent(&ioc->pcidev->dev, sz, ioc->sense_buf_pool, |
| 4616 |
ioc->sense_buf_pool_dma); |
| 4617 |
ioc->sense_buf_pool = NULL; |
| 4618 |
} |
| 4619 |
|
| 4620 |
if (dma_mask == DMA_BIT_MASK(35) && !dma_set_mask(&ioc->pcidev->dev, |
| 4621 |
DMA_BIT_MASK(64)) && !dma_set_coherent_mask(&ioc->pcidev->dev, |
| 4622 |
DMA_BIT_MASK(64))) |
| 4623 |
d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 4624 |
"restoring 64 bit addressing\n", ioc->name)); |
| 4625 |
|
| 4626 |
return -1; |
| 4627 |
} |
| 4628 |
|
| 4629 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 4630 |
/** |
| 4631 |
* mpt_handshake_req_reply_wait - Send MPT request to and receive reply |
| 4632 |
* from IOC via doorbell handshake method. |
| 4633 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 4634 |
* @reqBytes: Size of the request in bytes |
| 4635 |
* @req: Pointer to MPT request frame |
| 4636 |
* @replyBytes: Expected size of the reply in bytes |
| 4637 |
* @u16reply: Pointer to area where reply should be written |
| 4638 |
* @maxwait: Max wait time for a reply (in seconds) |
| 4639 |
* @sleepFlag: Specifies whether the process can sleep |
| 4640 |
* |
| 4641 |
* NOTES: It is the callers responsibility to byte-swap fields in the |
| 4642 |
* request which are greater than 1 byte in size. It is also the |
| 4643 |
* callers responsibility to byte-swap response fields which are |
| 4644 |
* greater than 1 byte in size. |
| 4645 |
* |
| 4646 |
* Returns 0 for success, non-zero for failure. |
| 4647 |
*/ |
| 4648 |
static int |
| 4649 |
mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes, u32 *req, |
| 4650 |
int replyBytes, u16 *u16reply, int maxwait, int sleepFlag) |
| 4651 |
{ |
| 4652 |
MPIDefaultReply_t *mptReply; |
| 4653 |
int failcnt = 0; |
| 4654 |
int t; |
| 4655 |
|
| 4656 |
/* |
| 4657 |
* Get ready to cache a handshake reply |
| 4658 |
*/ |
| 4659 |
ioc->hs_reply_idx = 0; |
| 4660 |
mptReply = (MPIDefaultReply_t *) ioc->hs_reply; |
| 4661 |
mptReply->MsgLength = 0; |
| 4662 |
|
| 4663 |
/* |
| 4664 |
* Make sure there are no doorbells (WRITE 0 to IntStatus reg), |
| 4665 |
* then tell IOC that we want to handshake a request of N words. |
| 4666 |
* (WRITE u32val to Doorbell reg). |
| 4667 |
*/ |
| 4668 |
CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); |
| 4669 |
CHIPREG_WRITE32(&ioc->chip->Doorbell, |
| 4670 |
((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) | |
| 4671 |
((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT))); |
| 4672 |
|
| 4673 |
/* |
| 4674 |
* Wait for IOC's doorbell handshake int |
| 4675 |
*/ |
| 4676 |
if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) |
| 4677 |
failcnt++; |
| 4678 |
|
| 4679 |
dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake request start reqBytes=%d, WaitCnt=%d%s\n", |
| 4680 |
ioc->name, reqBytes, t, failcnt ? " - MISSING DOORBELL HANDSHAKE!" : "")); |
| 4681 |
|
| 4682 |
/* Read doorbell and check for active bit */ |
| 4683 |
if (!(CHIPREG_READ32(&ioc->chip->Doorbell) & MPI_DOORBELL_ACTIVE)) |
| 4684 |
return -1; |
| 4685 |
|
| 4686 |
/* |
| 4687 |
* Clear doorbell int (WRITE 0 to IntStatus reg), |
| 4688 |
* then wait for IOC to ACKnowledge that it's ready for |
| 4689 |
* our handshake request. |
| 4690 |
*/ |
| 4691 |
CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); |
| 4692 |
if (!failcnt && (t = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) |
| 4693 |
failcnt++; |
| 4694 |
|
| 4695 |
if (!failcnt) { |
| 4696 |
int ii; |
| 4697 |
u8 *req_as_bytes = (u8 *) req; |
| 4698 |
|
| 4699 |
/* |
| 4700 |
* Stuff request words via doorbell handshake, |
| 4701 |
* with ACK from IOC for each. |
| 4702 |
*/ |
| 4703 |
for (ii = 0; !failcnt && ii < reqBytes/4; ii++) { |
| 4704 |
u32 word = ((req_as_bytes[(ii*4) + 0] << 0) | |
| 4705 |
(req_as_bytes[(ii*4) + 1] << 8) | |
| 4706 |
(req_as_bytes[(ii*4) + 2] << 16) | |
| 4707 |
(req_as_bytes[(ii*4) + 3] << 24)); |
| 4708 |
|
| 4709 |
CHIPREG_WRITE32(&ioc->chip->Doorbell, word); |
| 4710 |
if ((t = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) |
| 4711 |
failcnt++; |
| 4712 |
} |
| 4713 |
|
| 4714 |
dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Handshake request frame (@%p) header\n", ioc->name, req)); |
| 4715 |
DBG_DUMP_REQUEST_FRAME_HDR(ioc, (u32 *)req); |
| 4716 |
|
| 4717 |
dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake request post done, WaitCnt=%d%s\n", |
| 4718 |
ioc->name, t, failcnt ? " - MISSING DOORBELL ACK!" : "")); |
| 4719 |
|
| 4720 |
/* |
| 4721 |
* Wait for completion of doorbell handshake reply from the IOC |
| 4722 |
*/ |
| 4723 |
if (!failcnt && (t = WaitForDoorbellReply(ioc, maxwait, sleepFlag)) < 0) |
| 4724 |
failcnt++; |
| 4725 |
|
| 4726 |
dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake reply count=%d%s\n", |
| 4727 |
ioc->name, t, failcnt ? " - MISSING DOORBELL REPLY!" : "")); |
| 4728 |
|
| 4729 |
/* |
| 4730 |
* Copy out the cached reply... |
| 4731 |
*/ |
| 4732 |
for (ii=0; ii < min(replyBytes/2,mptReply->MsgLength*2); ii++) |
| 4733 |
u16reply[ii] = ioc->hs_reply[ii]; |
| 4734 |
} else { |
| 4735 |
return -99; |
| 4736 |
} |
| 4737 |
|
| 4738 |
return -failcnt; |
| 4739 |
} |
| 4740 |
|
| 4741 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 4742 |
/** |
| 4743 |
* WaitForDoorbellAck - Wait for IOC doorbell handshake acknowledge |
| 4744 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 4745 |
* @howlong: How long to wait (in seconds) |
| 4746 |
* @sleepFlag: Specifies whether the process can sleep |
| 4747 |
* |
| 4748 |
* This routine waits (up to ~2 seconds max) for IOC doorbell |
| 4749 |
* handshake ACKnowledge, indicated by the IOP_DOORBELL_STATUS |
| 4750 |
* bit in its IntStatus register being clear. |
| 4751 |
* |
| 4752 |
* Returns a negative value on failure, else wait loop count. |
| 4753 |
*/ |
| 4754 |
static int |
| 4755 |
WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag) |
| 4756 |
{ |
| 4757 |
int cntdn; |
| 4758 |
int count = 0; |
| 4759 |
u32 intstat=0; |
| 4760 |
|
| 4761 |
cntdn = 1000 * howlong; |
| 4762 |
|
| 4763 |
if (sleepFlag == CAN_SLEEP) { |
| 4764 |
while (--cntdn) { |
| 4765 |
msleep (1); |
| 4766 |
intstat = CHIPREG_READ32(&ioc->chip->IntStatus); |
| 4767 |
if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS)) |
| 4768 |
break; |
| 4769 |
count++; |
| 4770 |
} |
| 4771 |
} else { |
| 4772 |
while (--cntdn) { |
| 4773 |
udelay (1000); |
| 4774 |
intstat = CHIPREG_READ32(&ioc->chip->IntStatus); |
| 4775 |
if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS)) |
| 4776 |
break; |
| 4777 |
count++; |
| 4778 |
} |
| 4779 |
} |
| 4780 |
|
| 4781 |
if (cntdn) { |
| 4782 |
dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell ACK (count=%d)\n", |
| 4783 |
ioc->name, count)); |
| 4784 |
return count; |
| 4785 |
} |
| 4786 |
|
| 4787 |
printk(MYIOC_s_ERR_FMT "Doorbell ACK timeout (count=%d), IntStatus=%x!\n", |
| 4788 |
ioc->name, count, intstat); |
| 4789 |
return -1; |
| 4790 |
} |
| 4791 |
|
| 4792 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 4793 |
/** |
| 4794 |
* WaitForDoorbellInt - Wait for IOC to set its doorbell interrupt bit |
| 4795 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 4796 |
* @howlong: How long to wait (in seconds) |
| 4797 |
* @sleepFlag: Specifies whether the process can sleep |
| 4798 |
* |
| 4799 |
* This routine waits (up to ~2 seconds max) for IOC doorbell interrupt |
| 4800 |
* (MPI_HIS_DOORBELL_INTERRUPT) to be set in the IntStatus register. |
| 4801 |
* |
| 4802 |
* Returns a negative value on failure, else wait loop count. |
| 4803 |
*/ |
| 4804 |
static int |
| 4805 |
WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag) |
| 4806 |
{ |
| 4807 |
int cntdn; |
| 4808 |
int count = 0; |
| 4809 |
u32 intstat=0; |
| 4810 |
|
| 4811 |
cntdn = 1000 * howlong; |
| 4812 |
if (sleepFlag == CAN_SLEEP) { |
| 4813 |
while (--cntdn) { |
| 4814 |
intstat = CHIPREG_READ32(&ioc->chip->IntStatus); |
| 4815 |
if (intstat & MPI_HIS_DOORBELL_INTERRUPT) |
| 4816 |
break; |
| 4817 |
msleep(1); |
| 4818 |
count++; |
| 4819 |
} |
| 4820 |
} else { |
| 4821 |
while (--cntdn) { |
| 4822 |
intstat = CHIPREG_READ32(&ioc->chip->IntStatus); |
| 4823 |
if (intstat & MPI_HIS_DOORBELL_INTERRUPT) |
| 4824 |
break; |
| 4825 |
udelay (1000); |
| 4826 |
count++; |
| 4827 |
} |
| 4828 |
} |
| 4829 |
|
| 4830 |
if (cntdn) { |
| 4831 |
dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell INT (cnt=%d) howlong=%d\n", |
| 4832 |
ioc->name, count, howlong)); |
| 4833 |
return count; |
| 4834 |
} |
| 4835 |
|
| 4836 |
printk(MYIOC_s_ERR_FMT "Doorbell INT timeout (count=%d), IntStatus=%x!\n", |
| 4837 |
ioc->name, count, intstat); |
| 4838 |
return -1; |
| 4839 |
} |
| 4840 |
|
| 4841 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 4842 |
/** |
| 4843 |
* WaitForDoorbellReply - Wait for and capture an IOC handshake reply. |
| 4844 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 4845 |
* @howlong: How long to wait (in seconds) |
| 4846 |
* @sleepFlag: Specifies whether the process can sleep |
| 4847 |
* |
| 4848 |
* This routine polls the IOC for a handshake reply, 16 bits at a time. |
| 4849 |
* Reply is cached to IOC private area large enough to hold a maximum |
| 4850 |
* of 128 bytes of reply data. |
| 4851 |
* |
| 4852 |
* Returns a negative value on failure, else size of reply in WORDS. |
| 4853 |
*/ |
| 4854 |
static int |
| 4855 |
WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag) |
| 4856 |
{ |
| 4857 |
int u16cnt = 0; |
| 4858 |
int failcnt = 0; |
| 4859 |
int t; |
| 4860 |
u16 *hs_reply = ioc->hs_reply; |
| 4861 |
volatile MPIDefaultReply_t *mptReply = (MPIDefaultReply_t *) ioc->hs_reply; |
| 4862 |
u16 hword; |
| 4863 |
|
| 4864 |
hs_reply[0] = hs_reply[1] = hs_reply[7] = 0; |
| 4865 |
|
| 4866 |
/* |
| 4867 |
* Get first two u16's so we can look at IOC's intended reply MsgLength |
| 4868 |
*/ |
| 4869 |
u16cnt=0; |
| 4870 |
if ((t = WaitForDoorbellInt(ioc, howlong, sleepFlag)) < 0) { |
| 4871 |
failcnt++; |
| 4872 |
} else { |
| 4873 |
hs_reply[u16cnt++] = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF); |
| 4874 |
CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); |
| 4875 |
if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) |
| 4876 |
failcnt++; |
| 4877 |
else { |
| 4878 |
hs_reply[u16cnt++] = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF); |
| 4879 |
CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); |
| 4880 |
} |
| 4881 |
} |
| 4882 |
|
| 4883 |
dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitCnt=%d First handshake reply word=%08x%s\n", |
| 4884 |
ioc->name, t, le32_to_cpu(*(u32 *)hs_reply), |
| 4885 |
failcnt ? " - MISSING DOORBELL HANDSHAKE!" : "")); |
| 4886 |
|
| 4887 |
/* |
| 4888 |
* If no error (and IOC said MsgLength is > 0), piece together |
| 4889 |
* reply 16 bits at a time. |
| 4890 |
*/ |
| 4891 |
for (u16cnt=2; !failcnt && u16cnt < (2 * mptReply->MsgLength); u16cnt++) { |
| 4892 |
if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) |
| 4893 |
failcnt++; |
| 4894 |
hword = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF); |
| 4895 |
/* don't overflow our IOC hs_reply[] buffer! */ |
| 4896 |
if (u16cnt < ARRAY_SIZE(ioc->hs_reply)) |
| 4897 |
hs_reply[u16cnt] = hword; |
| 4898 |
CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); |
| 4899 |
} |
| 4900 |
|
| 4901 |
if (!failcnt && (t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) |
| 4902 |
failcnt++; |
| 4903 |
CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); |
| 4904 |
|
| 4905 |
if (failcnt) { |
| 4906 |
printk(MYIOC_s_ERR_FMT "Handshake reply failure!\n", |
| 4907 |
ioc->name); |
| 4908 |
return -failcnt; |
| 4909 |
} |
| 4910 |
#if 0 |
| 4911 |
else if (u16cnt != (2 * mptReply->MsgLength)) { |
| 4912 |
return -101; |
| 4913 |
} |
| 4914 |
else if ((mptReply->IOCStatus & MPI_IOCSTATUS_MASK) != MPI_IOCSTATUS_SUCCESS) { |
| 4915 |
return -102; |
| 4916 |
} |
| 4917 |
#endif |
| 4918 |
|
| 4919 |
dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got Handshake reply:\n", ioc->name)); |
| 4920 |
DBG_DUMP_REPLY_FRAME(ioc, (u32 *)mptReply); |
| 4921 |
|
| 4922 |
dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell REPLY WaitCnt=%d (sz=%d)\n", |
| 4923 |
ioc->name, t, u16cnt/2)); |
| 4924 |
return u16cnt/2; |
| 4925 |
} |
| 4926 |
|
| 4927 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 4928 |
/** |
| 4929 |
* GetLanConfigPages - Fetch LANConfig pages. |
| 4930 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 4931 |
* |
| 4932 |
* Return: 0 for success |
| 4933 |
* -ENOMEM if no memory available |
| 4934 |
* -EPERM if not allowed due to ISR context |
| 4935 |
* -EAGAIN if no msg frames currently available |
| 4936 |
* -EFAULT for non-successful reply or no reply (timeout) |
| 4937 |
*/ |
| 4938 |
static int |
| 4939 |
GetLanConfigPages(MPT_ADAPTER *ioc) |
| 4940 |
{ |
| 4941 |
ConfigPageHeader_t hdr; |
| 4942 |
CONFIGPARMS cfg; |
| 4943 |
LANPage0_t *ppage0_alloc; |
| 4944 |
dma_addr_t page0_dma; |
| 4945 |
LANPage1_t *ppage1_alloc; |
| 4946 |
dma_addr_t page1_dma; |
| 4947 |
int rc = 0; |
| 4948 |
int data_sz; |
| 4949 |
int copy_sz; |
| 4950 |
|
| 4951 |
/* Get LAN Page 0 header */ |
| 4952 |
hdr.PageVersion = 0; |
| 4953 |
hdr.PageLength = 0; |
| 4954 |
hdr.PageNumber = 0; |
| 4955 |
hdr.PageType = MPI_CONFIG_PAGETYPE_LAN; |
| 4956 |
cfg.cfghdr.hdr = &hdr; |
| 4957 |
cfg.physAddr = -1; |
| 4958 |
cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; |
| 4959 |
cfg.dir = 0; |
| 4960 |
cfg.pageAddr = 0; |
| 4961 |
cfg.timeout = 0; |
| 4962 |
|
| 4963 |
if ((rc = mpt_config(ioc, &cfg)) != 0) |
| 4964 |
return rc; |
| 4965 |
|
| 4966 |
if (hdr.PageLength > 0) { |
| 4967 |
data_sz = hdr.PageLength * 4; |
| 4968 |
ppage0_alloc = dma_alloc_coherent(&ioc->pcidev->dev, data_sz, |
| 4969 |
&page0_dma, GFP_KERNEL); |
| 4970 |
rc = -ENOMEM; |
| 4971 |
if (ppage0_alloc) { |
| 4972 |
memset((u8 *)ppage0_alloc, 0, data_sz); |
| 4973 |
cfg.physAddr = page0_dma; |
| 4974 |
cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; |
| 4975 |
|
| 4976 |
if ((rc = mpt_config(ioc, &cfg)) == 0) { |
| 4977 |
/* save the data */ |
| 4978 |
copy_sz = min_t(int, sizeof(LANPage0_t), data_sz); |
| 4979 |
memcpy(&ioc->lan_cnfg_page0, ppage0_alloc, copy_sz); |
| 4980 |
|
| 4981 |
} |
| 4982 |
|
| 4983 |
dma_free_coherent(&ioc->pcidev->dev, data_sz, |
| 4984 |
(u8 *)ppage0_alloc, page0_dma); |
| 4985 |
|
| 4986 |
/* FIXME! |
| 4987 |
* Normalize endianness of structure data, |
| 4988 |
* by byte-swapping all > 1 byte fields! |
| 4989 |
*/ |
| 4990 |
|
| 4991 |
} |
| 4992 |
|
| 4993 |
if (rc) |
| 4994 |
return rc; |
| 4995 |
} |
| 4996 |
|
| 4997 |
/* Get LAN Page 1 header */ |
| 4998 |
hdr.PageVersion = 0; |
| 4999 |
hdr.PageLength = 0; |
| 5000 |
hdr.PageNumber = 1; |
| 5001 |
hdr.PageType = MPI_CONFIG_PAGETYPE_LAN; |
| 5002 |
cfg.cfghdr.hdr = &hdr; |
| 5003 |
cfg.physAddr = -1; |
| 5004 |
cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; |
| 5005 |
cfg.dir = 0; |
| 5006 |
cfg.pageAddr = 0; |
| 5007 |
|
| 5008 |
if ((rc = mpt_config(ioc, &cfg)) != 0) |
| 5009 |
return rc; |
| 5010 |
|
| 5011 |
if (hdr.PageLength == 0) |
| 5012 |
return 0; |
| 5013 |
|
| 5014 |
data_sz = hdr.PageLength * 4; |
| 5015 |
rc = -ENOMEM; |
| 5016 |
ppage1_alloc = dma_alloc_coherent(&ioc->pcidev->dev, data_sz, |
| 5017 |
&page1_dma, GFP_KERNEL); |
| 5018 |
if (ppage1_alloc) { |
| 5019 |
memset((u8 *)ppage1_alloc, 0, data_sz); |
| 5020 |
cfg.physAddr = page1_dma; |
| 5021 |
cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; |
| 5022 |
|
| 5023 |
if ((rc = mpt_config(ioc, &cfg)) == 0) { |
| 5024 |
/* save the data */ |
| 5025 |
copy_sz = min_t(int, sizeof(LANPage1_t), data_sz); |
| 5026 |
memcpy(&ioc->lan_cnfg_page1, ppage1_alloc, copy_sz); |
| 5027 |
} |
| 5028 |
|
| 5029 |
dma_free_coherent(&ioc->pcidev->dev, data_sz, |
| 5030 |
(u8 *)ppage1_alloc, page1_dma); |
| 5031 |
|
| 5032 |
/* FIXME! |
| 5033 |
* Normalize endianness of structure data, |
| 5034 |
* by byte-swapping all > 1 byte fields! |
| 5035 |
*/ |
| 5036 |
|
| 5037 |
} |
| 5038 |
|
| 5039 |
return rc; |
| 5040 |
} |
| 5041 |
|
| 5042 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 5043 |
/** |
| 5044 |
* mptbase_sas_persist_operation - Perform operation on SAS Persistent Table |
| 5045 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 5046 |
* @persist_opcode: see below |
| 5047 |
* |
| 5048 |
* =============================== ====================================== |
| 5049 |
* MPI_SAS_OP_CLEAR_NOT_PRESENT Free all persist TargetID mappings for |
| 5050 |
* devices not currently present. |
| 5051 |
* MPI_SAS_OP_CLEAR_ALL_PERSISTENT Clear al persist TargetID mappings |
| 5052 |
* =============================== ====================================== |
| 5053 |
* |
| 5054 |
* NOTE: Don't use not this function during interrupt time. |
| 5055 |
* |
| 5056 |
* Returns 0 for success, non-zero error |
| 5057 |
*/ |
| 5058 |
|
| 5059 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 5060 |
int |
| 5061 |
mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode) |
| 5062 |
{ |
| 5063 |
SasIoUnitControlRequest_t *sasIoUnitCntrReq; |
| 5064 |
SasIoUnitControlReply_t *sasIoUnitCntrReply; |
| 5065 |
MPT_FRAME_HDR *mf = NULL; |
| 5066 |
MPIHeader_t *mpi_hdr; |
| 5067 |
int ret = 0; |
| 5068 |
unsigned long timeleft; |
| 5069 |
|
| 5070 |
mutex_lock(&ioc->mptbase_cmds.mutex); |
| 5071 |
|
| 5072 |
/* init the internal cmd struct */ |
| 5073 |
memset(ioc->mptbase_cmds.reply, 0 , MPT_DEFAULT_FRAME_SIZE); |
| 5074 |
INITIALIZE_MGMT_STATUS(ioc->mptbase_cmds.status) |
| 5075 |
|
| 5076 |
/* insure garbage is not sent to fw */ |
| 5077 |
switch(persist_opcode) { |
| 5078 |
|
| 5079 |
case MPI_SAS_OP_CLEAR_NOT_PRESENT: |
| 5080 |
case MPI_SAS_OP_CLEAR_ALL_PERSISTENT: |
| 5081 |
break; |
| 5082 |
|
| 5083 |
default: |
| 5084 |
ret = -1; |
| 5085 |
goto out; |
| 5086 |
} |
| 5087 |
|
| 5088 |
printk(KERN_DEBUG "%s: persist_opcode=%x\n", |
| 5089 |
__func__, persist_opcode); |
| 5090 |
|
| 5091 |
/* Get a MF for this command. |
| 5092 |
*/ |
| 5093 |
if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) { |
| 5094 |
printk(KERN_DEBUG "%s: no msg frames!\n", __func__); |
| 5095 |
ret = -1; |
| 5096 |
goto out; |
| 5097 |
} |
| 5098 |
|
| 5099 |
mpi_hdr = (MPIHeader_t *) mf; |
| 5100 |
sasIoUnitCntrReq = (SasIoUnitControlRequest_t *)mf; |
| 5101 |
memset(sasIoUnitCntrReq,0,sizeof(SasIoUnitControlRequest_t)); |
| 5102 |
sasIoUnitCntrReq->Function = MPI_FUNCTION_SAS_IO_UNIT_CONTROL; |
| 5103 |
sasIoUnitCntrReq->MsgContext = mpi_hdr->MsgContext; |
| 5104 |
sasIoUnitCntrReq->Operation = persist_opcode; |
| 5105 |
|
| 5106 |
mpt_put_msg_frame(mpt_base_index, ioc, mf); |
| 5107 |
timeleft = wait_for_completion_timeout(&ioc->mptbase_cmds.done, 10*HZ); |
| 5108 |
if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) { |
| 5109 |
ret = -ETIME; |
| 5110 |
printk(KERN_DEBUG "%s: failed\n", __func__); |
| 5111 |
if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) |
| 5112 |
goto out; |
| 5113 |
if (!timeleft) { |
| 5114 |
printk(MYIOC_s_WARN_FMT |
| 5115 |
"Issuing Reset from %s!!, doorbell=0x%08x\n", |
| 5116 |
ioc->name, __func__, mpt_GetIocState(ioc, 0)); |
| 5117 |
mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP); |
| 5118 |
mpt_free_msg_frame(ioc, mf); |
| 5119 |
} |
| 5120 |
goto out; |
| 5121 |
} |
| 5122 |
|
| 5123 |
if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_RF_VALID)) { |
| 5124 |
ret = -1; |
| 5125 |
goto out; |
| 5126 |
} |
| 5127 |
|
| 5128 |
sasIoUnitCntrReply = |
| 5129 |
(SasIoUnitControlReply_t *)ioc->mptbase_cmds.reply; |
| 5130 |
if (le16_to_cpu(sasIoUnitCntrReply->IOCStatus) != MPI_IOCSTATUS_SUCCESS) { |
| 5131 |
printk(KERN_DEBUG "%s: IOCStatus=0x%X IOCLogInfo=0x%X\n", |
| 5132 |
__func__, sasIoUnitCntrReply->IOCStatus, |
| 5133 |
sasIoUnitCntrReply->IOCLogInfo); |
| 5134 |
printk(KERN_DEBUG "%s: failed\n", __func__); |
| 5135 |
ret = -1; |
| 5136 |
} else |
| 5137 |
printk(KERN_DEBUG "%s: success\n", __func__); |
| 5138 |
out: |
| 5139 |
|
| 5140 |
CLEAR_MGMT_STATUS(ioc->mptbase_cmds.status) |
| 5141 |
mutex_unlock(&ioc->mptbase_cmds.mutex); |
| 5142 |
return ret; |
| 5143 |
} |
| 5144 |
|
| 5145 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 5146 |
|
| 5147 |
static void |
| 5148 |
mptbase_raid_process_event_data(MPT_ADAPTER *ioc, |
| 5149 |
MpiEventDataRaid_t * pRaidEventData) |
| 5150 |
{ |
| 5151 |
int volume; |
| 5152 |
int reason; |
| 5153 |
int disk; |
| 5154 |
int status; |
| 5155 |
int flags; |
| 5156 |
int state; |
| 5157 |
|
| 5158 |
volume = pRaidEventData->VolumeID; |
| 5159 |
reason = pRaidEventData->ReasonCode; |
| 5160 |
disk = pRaidEventData->PhysDiskNum; |
| 5161 |
status = le32_to_cpu(pRaidEventData->SettingsStatus); |
| 5162 |
flags = (status >> 0) & 0xff; |
| 5163 |
state = (status >> 8) & 0xff; |
| 5164 |
|
| 5165 |
if (reason == MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED) { |
| 5166 |
return; |
| 5167 |
} |
| 5168 |
|
| 5169 |
if ((reason >= MPI_EVENT_RAID_RC_PHYSDISK_CREATED && |
| 5170 |
reason <= MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED) || |
| 5171 |
(reason == MPI_EVENT_RAID_RC_SMART_DATA)) { |
| 5172 |
printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for PhysDisk %d id=%d\n", |
| 5173 |
ioc->name, disk, volume); |
| 5174 |
} else { |
| 5175 |
printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for VolumeID %d\n", |
| 5176 |
ioc->name, volume); |
| 5177 |
} |
| 5178 |
|
| 5179 |
switch(reason) { |
| 5180 |
case MPI_EVENT_RAID_RC_VOLUME_CREATED: |
| 5181 |
printk(MYIOC_s_INFO_FMT " volume has been created\n", |
| 5182 |
ioc->name); |
| 5183 |
break; |
| 5184 |
|
| 5185 |
case MPI_EVENT_RAID_RC_VOLUME_DELETED: |
| 5186 |
|
| 5187 |
printk(MYIOC_s_INFO_FMT " volume has been deleted\n", |
| 5188 |
ioc->name); |
| 5189 |
break; |
| 5190 |
|
| 5191 |
case MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED: |
| 5192 |
printk(MYIOC_s_INFO_FMT " volume settings have been changed\n", |
| 5193 |
ioc->name); |
| 5194 |
break; |
| 5195 |
|
| 5196 |
case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED: |
| 5197 |
printk(MYIOC_s_INFO_FMT " volume is now %s%s%s%s\n", |
| 5198 |
ioc->name, |
| 5199 |
state == MPI_RAIDVOL0_STATUS_STATE_OPTIMAL |
| 5200 |
? "optimal" |
| 5201 |
: state == MPI_RAIDVOL0_STATUS_STATE_DEGRADED |
| 5202 |
? "degraded" |
| 5203 |
: state == MPI_RAIDVOL0_STATUS_STATE_FAILED |
| 5204 |
? "failed" |
| 5205 |
: "state unknown", |
| 5206 |
flags & MPI_RAIDVOL0_STATUS_FLAG_ENABLED |
| 5207 |
? ", enabled" : "", |
| 5208 |
flags & MPI_RAIDVOL0_STATUS_FLAG_QUIESCED |
| 5209 |
? ", quiesced" : "", |
| 5210 |
flags & MPI_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS |
| 5211 |
? ", resync in progress" : "" ); |
| 5212 |
break; |
| 5213 |
|
| 5214 |
case MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED: |
| 5215 |
printk(MYIOC_s_INFO_FMT " volume membership of PhysDisk %d has changed\n", |
| 5216 |
ioc->name, disk); |
| 5217 |
break; |
| 5218 |
|
| 5219 |
case MPI_EVENT_RAID_RC_PHYSDISK_CREATED: |
| 5220 |
printk(MYIOC_s_INFO_FMT " PhysDisk has been created\n", |
| 5221 |
ioc->name); |
| 5222 |
break; |
| 5223 |
|
| 5224 |
case MPI_EVENT_RAID_RC_PHYSDISK_DELETED: |
| 5225 |
printk(MYIOC_s_INFO_FMT " PhysDisk has been deleted\n", |
| 5226 |
ioc->name); |
| 5227 |
break; |
| 5228 |
|
| 5229 |
case MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED: |
| 5230 |
printk(MYIOC_s_INFO_FMT " PhysDisk settings have been changed\n", |
| 5231 |
ioc->name); |
| 5232 |
break; |
| 5233 |
|
| 5234 |
case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED: |
| 5235 |
printk(MYIOC_s_INFO_FMT " PhysDisk is now %s%s%s\n", |
| 5236 |
ioc->name, |
| 5237 |
state == MPI_PHYSDISK0_STATUS_ONLINE |
| 5238 |
? "online" |
| 5239 |
: state == MPI_PHYSDISK0_STATUS_MISSING |
| 5240 |
? "missing" |
| 5241 |
: state == MPI_PHYSDISK0_STATUS_NOT_COMPATIBLE |
| 5242 |
? "not compatible" |
| 5243 |
: state == MPI_PHYSDISK0_STATUS_FAILED |
| 5244 |
? "failed" |
| 5245 |
: state == MPI_PHYSDISK0_STATUS_INITIALIZING |
| 5246 |
? "initializing" |
| 5247 |
: state == MPI_PHYSDISK0_STATUS_OFFLINE_REQUESTED |
| 5248 |
? "offline requested" |
| 5249 |
: state == MPI_PHYSDISK0_STATUS_FAILED_REQUESTED |
| 5250 |
? "failed requested" |
| 5251 |
: state == MPI_PHYSDISK0_STATUS_OTHER_OFFLINE |
| 5252 |
? "offline" |
| 5253 |
: "state unknown", |
| 5254 |
flags & MPI_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC |
| 5255 |
? ", out of sync" : "", |
| 5256 |
flags & MPI_PHYSDISK0_STATUS_FLAG_QUIESCED |
| 5257 |
? ", quiesced" : "" ); |
| 5258 |
break; |
| 5259 |
|
| 5260 |
case MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED: |
| 5261 |
printk(MYIOC_s_INFO_FMT " Domain Validation needed for PhysDisk %d\n", |
| 5262 |
ioc->name, disk); |
| 5263 |
break; |
| 5264 |
|
| 5265 |
case MPI_EVENT_RAID_RC_SMART_DATA: |
| 5266 |
printk(MYIOC_s_INFO_FMT " SMART data received, ASC/ASCQ = %02xh/%02xh\n", |
| 5267 |
ioc->name, pRaidEventData->ASC, pRaidEventData->ASCQ); |
| 5268 |
break; |
| 5269 |
|
| 5270 |
case MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED: |
| 5271 |
printk(MYIOC_s_INFO_FMT " replacement of PhysDisk %d has started\n", |
| 5272 |
ioc->name, disk); |
| 5273 |
break; |
| 5274 |
} |
| 5275 |
} |
| 5276 |
|
| 5277 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 5278 |
/** |
| 5279 |
* GetIoUnitPage2 - Retrieve BIOS version and boot order information. |
| 5280 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 5281 |
* |
| 5282 |
* Returns: 0 for success |
| 5283 |
* -ENOMEM if no memory available |
| 5284 |
* -EPERM if not allowed due to ISR context |
| 5285 |
* -EAGAIN if no msg frames currently available |
| 5286 |
* -EFAULT for non-successful reply or no reply (timeout) |
| 5287 |
*/ |
| 5288 |
static int |
| 5289 |
GetIoUnitPage2(MPT_ADAPTER *ioc) |
| 5290 |
{ |
| 5291 |
ConfigPageHeader_t hdr; |
| 5292 |
CONFIGPARMS cfg; |
| 5293 |
IOUnitPage2_t *ppage_alloc; |
| 5294 |
dma_addr_t page_dma; |
| 5295 |
int data_sz; |
| 5296 |
int rc; |
| 5297 |
|
| 5298 |
/* Get the page header */ |
| 5299 |
hdr.PageVersion = 0; |
| 5300 |
hdr.PageLength = 0; |
| 5301 |
hdr.PageNumber = 2; |
| 5302 |
hdr.PageType = MPI_CONFIG_PAGETYPE_IO_UNIT; |
| 5303 |
cfg.cfghdr.hdr = &hdr; |
| 5304 |
cfg.physAddr = -1; |
| 5305 |
cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; |
| 5306 |
cfg.dir = 0; |
| 5307 |
cfg.pageAddr = 0; |
| 5308 |
cfg.timeout = 0; |
| 5309 |
|
| 5310 |
if ((rc = mpt_config(ioc, &cfg)) != 0) |
| 5311 |
return rc; |
| 5312 |
|
| 5313 |
if (hdr.PageLength == 0) |
| 5314 |
return 0; |
| 5315 |
|
| 5316 |
/* Read the config page */ |
| 5317 |
data_sz = hdr.PageLength * 4; |
| 5318 |
rc = -ENOMEM; |
| 5319 |
ppage_alloc = dma_alloc_coherent(&ioc->pcidev->dev, data_sz, |
| 5320 |
&page_dma, GFP_KERNEL); |
| 5321 |
if (ppage_alloc) { |
| 5322 |
memset((u8 *)ppage_alloc, 0, data_sz); |
| 5323 |
cfg.physAddr = page_dma; |
| 5324 |
cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; |
| 5325 |
|
| 5326 |
/* If Good, save data */ |
| 5327 |
if ((rc = mpt_config(ioc, &cfg)) == 0) |
| 5328 |
ioc->biosVersion = le32_to_cpu(ppage_alloc->BiosVersion); |
| 5329 |
|
| 5330 |
dma_free_coherent(&ioc->pcidev->dev, data_sz, |
| 5331 |
(u8 *)ppage_alloc, page_dma); |
| 5332 |
} |
| 5333 |
|
| 5334 |
return rc; |
| 5335 |
} |
| 5336 |
|
| 5337 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 5338 |
/** |
| 5339 |
* mpt_GetScsiPortSettings - read SCSI Port Page 0 and 2 |
| 5340 |
* @ioc: Pointer to a Adapter Strucutre |
| 5341 |
* @portnum: IOC port number |
| 5342 |
* |
| 5343 |
* Return: -EFAULT if read of config page header fails |
| 5344 |
* or if no nvram |
| 5345 |
* If read of SCSI Port Page 0 fails, |
| 5346 |
* NVRAM = MPT_HOST_NVRAM_INVALID (0xFFFFFFFF) |
| 5347 |
* Adapter settings: async, narrow |
| 5348 |
* Return 1 |
| 5349 |
* If read of SCSI Port Page 2 fails, |
| 5350 |
* Adapter settings valid |
| 5351 |
* NVRAM = MPT_HOST_NVRAM_INVALID (0xFFFFFFFF) |
| 5352 |
* Return 1 |
| 5353 |
* Else |
| 5354 |
* Both valid |
| 5355 |
* Return 0 |
| 5356 |
* CHECK - what type of locking mechanisms should be used???? |
| 5357 |
*/ |
| 5358 |
static int |
| 5359 |
mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum) |
| 5360 |
{ |
| 5361 |
u8 *pbuf; |
| 5362 |
dma_addr_t buf_dma; |
| 5363 |
CONFIGPARMS cfg; |
| 5364 |
ConfigPageHeader_t header; |
| 5365 |
int ii; |
| 5366 |
int data, rc = 0; |
| 5367 |
|
| 5368 |
/* Allocate memory |
| 5369 |
*/ |
| 5370 |
if (!ioc->spi_data.nvram) { |
| 5371 |
int sz; |
| 5372 |
u8 *mem; |
| 5373 |
sz = MPT_MAX_SCSI_DEVICES * sizeof(int); |
| 5374 |
mem = kmalloc(sz, GFP_ATOMIC); |
| 5375 |
if (mem == NULL) |
| 5376 |
return -EFAULT; |
| 5377 |
|
| 5378 |
ioc->spi_data.nvram = (int *) mem; |
| 5379 |
|
| 5380 |
dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SCSI device NVRAM settings @ %p, sz=%d\n", |
| 5381 |
ioc->name, ioc->spi_data.nvram, sz)); |
| 5382 |
} |
| 5383 |
|
| 5384 |
/* Invalidate NVRAM information |
| 5385 |
*/ |
| 5386 |
for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) { |
| 5387 |
ioc->spi_data.nvram[ii] = MPT_HOST_NVRAM_INVALID; |
| 5388 |
} |
| 5389 |
|
| 5390 |
/* Read SPP0 header, allocate memory, then read page. |
| 5391 |
*/ |
| 5392 |
header.PageVersion = 0; |
| 5393 |
header.PageLength = 0; |
| 5394 |
header.PageNumber = 0; |
| 5395 |
header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT; |
| 5396 |
cfg.cfghdr.hdr = &header; |
| 5397 |
cfg.physAddr = -1; |
| 5398 |
cfg.pageAddr = portnum; |
| 5399 |
cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; |
| 5400 |
cfg.dir = 0; |
| 5401 |
cfg.timeout = 0; /* use default */ |
| 5402 |
if (mpt_config(ioc, &cfg) != 0) |
| 5403 |
return -EFAULT; |
| 5404 |
|
| 5405 |
if (header.PageLength > 0) { |
| 5406 |
pbuf = dma_alloc_coherent(&ioc->pcidev->dev, |
| 5407 |
header.PageLength * 4, &buf_dma, |
| 5408 |
GFP_KERNEL); |
| 5409 |
if (pbuf) { |
| 5410 |
cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; |
| 5411 |
cfg.physAddr = buf_dma; |
| 5412 |
if (mpt_config(ioc, &cfg) != 0) { |
| 5413 |
ioc->spi_data.maxBusWidth = MPT_NARROW; |
| 5414 |
ioc->spi_data.maxSyncOffset = 0; |
| 5415 |
ioc->spi_data.minSyncFactor = MPT_ASYNC; |
| 5416 |
ioc->spi_data.busType = MPT_HOST_BUS_UNKNOWN; |
| 5417 |
rc = 1; |
| 5418 |
ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 5419 |
"Unable to read PortPage0 minSyncFactor=%x\n", |
| 5420 |
ioc->name, ioc->spi_data.minSyncFactor)); |
| 5421 |
} else { |
| 5422 |
/* Save the Port Page 0 data |
| 5423 |
*/ |
| 5424 |
SCSIPortPage0_t *pPP0 = (SCSIPortPage0_t *) pbuf; |
| 5425 |
pPP0->Capabilities = le32_to_cpu(pPP0->Capabilities); |
| 5426 |
pPP0->PhysicalInterface = le32_to_cpu(pPP0->PhysicalInterface); |
| 5427 |
|
| 5428 |
if ( (pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_QAS) == 0 ) { |
| 5429 |
ioc->spi_data.noQas |= MPT_TARGET_NO_NEGO_QAS; |
| 5430 |
ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 5431 |
"noQas due to Capabilities=%x\n", |
| 5432 |
ioc->name, pPP0->Capabilities)); |
| 5433 |
} |
| 5434 |
ioc->spi_data.maxBusWidth = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_WIDE ? 1 : 0; |
| 5435 |
data = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MAX_SYNC_OFFSET_MASK; |
| 5436 |
if (data) { |
| 5437 |
ioc->spi_data.maxSyncOffset = (u8) (data >> 16); |
| 5438 |
data = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MIN_SYNC_PERIOD_MASK; |
| 5439 |
ioc->spi_data.minSyncFactor = (u8) (data >> 8); |
| 5440 |
ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 5441 |
"PortPage0 minSyncFactor=%x\n", |
| 5442 |
ioc->name, ioc->spi_data.minSyncFactor)); |
| 5443 |
} else { |
| 5444 |
ioc->spi_data.maxSyncOffset = 0; |
| 5445 |
ioc->spi_data.minSyncFactor = MPT_ASYNC; |
| 5446 |
} |
| 5447 |
|
| 5448 |
ioc->spi_data.busType = pPP0->PhysicalInterface & MPI_SCSIPORTPAGE0_PHY_SIGNAL_TYPE_MASK; |
| 5449 |
|
| 5450 |
/* Update the minSyncFactor based on bus type. |
| 5451 |
*/ |
| 5452 |
if ((ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_HVD) || |
| 5453 |
(ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_SE)) { |
| 5454 |
|
| 5455 |
if (ioc->spi_data.minSyncFactor < MPT_ULTRA) { |
| 5456 |
ioc->spi_data.minSyncFactor = MPT_ULTRA; |
| 5457 |
ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 5458 |
"HVD or SE detected, minSyncFactor=%x\n", |
| 5459 |
ioc->name, ioc->spi_data.minSyncFactor)); |
| 5460 |
} |
| 5461 |
} |
| 5462 |
} |
| 5463 |
if (pbuf) { |
| 5464 |
dma_free_coherent(&ioc->pcidev->dev, |
| 5465 |
header.PageLength * 4, pbuf, |
| 5466 |
buf_dma); |
| 5467 |
} |
| 5468 |
} |
| 5469 |
} |
| 5470 |
|
| 5471 |
/* SCSI Port Page 2 - Read the header then the page. |
| 5472 |
*/ |
| 5473 |
header.PageVersion = 0; |
| 5474 |
header.PageLength = 0; |
| 5475 |
header.PageNumber = 2; |
| 5476 |
header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT; |
| 5477 |
cfg.cfghdr.hdr = &header; |
| 5478 |
cfg.physAddr = -1; |
| 5479 |
cfg.pageAddr = portnum; |
| 5480 |
cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; |
| 5481 |
cfg.dir = 0; |
| 5482 |
if (mpt_config(ioc, &cfg) != 0) |
| 5483 |
return -EFAULT; |
| 5484 |
|
| 5485 |
if (header.PageLength > 0) { |
| 5486 |
/* Allocate memory and read SCSI Port Page 2 |
| 5487 |
*/ |
| 5488 |
pbuf = dma_alloc_coherent(&ioc->pcidev->dev, |
| 5489 |
header.PageLength * 4, &buf_dma, |
| 5490 |
GFP_KERNEL); |
| 5491 |
if (pbuf) { |
| 5492 |
cfg.action = MPI_CONFIG_ACTION_PAGE_READ_NVRAM; |
| 5493 |
cfg.physAddr = buf_dma; |
| 5494 |
if (mpt_config(ioc, &cfg) != 0) { |
| 5495 |
/* Nvram data is left with INVALID mark |
| 5496 |
*/ |
| 5497 |
rc = 1; |
| 5498 |
} else if (ioc->pcidev->vendor == PCI_VENDOR_ID_ATTO) { |
| 5499 |
|
| 5500 |
/* This is an ATTO adapter, read Page2 accordingly |
| 5501 |
*/ |
| 5502 |
ATTO_SCSIPortPage2_t *pPP2 = (ATTO_SCSIPortPage2_t *) pbuf; |
| 5503 |
ATTODeviceInfo_t *pdevice = NULL; |
| 5504 |
u16 ATTOFlags; |
| 5505 |
|
| 5506 |
/* Save the Port Page 2 data |
| 5507 |
* (reformat into a 32bit quantity) |
| 5508 |
*/ |
| 5509 |
for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) { |
| 5510 |
pdevice = &pPP2->DeviceSettings[ii]; |
| 5511 |
ATTOFlags = le16_to_cpu(pdevice->ATTOFlags); |
| 5512 |
data = 0; |
| 5513 |
|
| 5514 |
/* Translate ATTO device flags to LSI format |
| 5515 |
*/ |
| 5516 |
if (ATTOFlags & ATTOFLAG_DISC) |
| 5517 |
data |= (MPI_SCSIPORTPAGE2_DEVICE_DISCONNECT_ENABLE); |
| 5518 |
if (ATTOFlags & ATTOFLAG_ID_ENB) |
| 5519 |
data |= (MPI_SCSIPORTPAGE2_DEVICE_ID_SCAN_ENABLE); |
| 5520 |
if (ATTOFlags & ATTOFLAG_LUN_ENB) |
| 5521 |
data |= (MPI_SCSIPORTPAGE2_DEVICE_LUN_SCAN_ENABLE); |
| 5522 |
if (ATTOFlags & ATTOFLAG_TAGGED) |
| 5523 |
data |= (MPI_SCSIPORTPAGE2_DEVICE_TAG_QUEUE_ENABLE); |
| 5524 |
if (!(ATTOFlags & ATTOFLAG_WIDE_ENB)) |
| 5525 |
data |= (MPI_SCSIPORTPAGE2_DEVICE_WIDE_DISABLE); |
| 5526 |
|
| 5527 |
data = (data << 16) | (pdevice->Period << 8) | 10; |
| 5528 |
ioc->spi_data.nvram[ii] = data; |
| 5529 |
} |
| 5530 |
} else { |
| 5531 |
SCSIPortPage2_t *pPP2 = (SCSIPortPage2_t *) pbuf; |
| 5532 |
MpiDeviceInfo_t *pdevice = NULL; |
| 5533 |
|
| 5534 |
/* |
| 5535 |
* Save "Set to Avoid SCSI Bus Resets" flag |
| 5536 |
*/ |
| 5537 |
ioc->spi_data.bus_reset = |
| 5538 |
(le32_to_cpu(pPP2->PortFlags) & |
| 5539 |
MPI_SCSIPORTPAGE2_PORT_FLAGS_AVOID_SCSI_RESET) ? |
| 5540 |
0 : 1 ; |
| 5541 |
|
| 5542 |
/* Save the Port Page 2 data |
| 5543 |
* (reformat into a 32bit quantity) |
| 5544 |
*/ |
| 5545 |
data = le32_to_cpu(pPP2->PortFlags) & MPI_SCSIPORTPAGE2_PORT_FLAGS_DV_MASK; |
| 5546 |
ioc->spi_data.PortFlags = data; |
| 5547 |
for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) { |
| 5548 |
pdevice = &pPP2->DeviceSettings[ii]; |
| 5549 |
data = (le16_to_cpu(pdevice->DeviceFlags) << 16) | |
| 5550 |
(pdevice->SyncFactor << 8) | pdevice->Timeout; |
| 5551 |
ioc->spi_data.nvram[ii] = data; |
| 5552 |
} |
| 5553 |
} |
| 5554 |
|
| 5555 |
dma_free_coherent(&ioc->pcidev->dev, |
| 5556 |
header.PageLength * 4, pbuf, |
| 5557 |
buf_dma); |
| 5558 |
} |
| 5559 |
} |
| 5560 |
|
| 5561 |
/* Update Adapter limits with those from NVRAM |
| 5562 |
* Comment: Don't need to do this. Target performance |
| 5563 |
* parameters will never exceed the adapters limits. |
| 5564 |
*/ |
| 5565 |
|
| 5566 |
return rc; |
| 5567 |
} |
| 5568 |
|
| 5569 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 5570 |
/** |
| 5571 |
* mpt_readScsiDevicePageHeaders - save version and length of SDP1 |
| 5572 |
* @ioc: Pointer to a Adapter Strucutre |
| 5573 |
* @portnum: IOC port number |
| 5574 |
* |
| 5575 |
* Return: -EFAULT if read of config page header fails |
| 5576 |
* or 0 if success. |
| 5577 |
*/ |
| 5578 |
static int |
| 5579 |
mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum) |
| 5580 |
{ |
| 5581 |
CONFIGPARMS cfg; |
| 5582 |
ConfigPageHeader_t header; |
| 5583 |
|
| 5584 |
/* Read the SCSI Device Page 1 header |
| 5585 |
*/ |
| 5586 |
header.PageVersion = 0; |
| 5587 |
header.PageLength = 0; |
| 5588 |
header.PageNumber = 1; |
| 5589 |
header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE; |
| 5590 |
cfg.cfghdr.hdr = &header; |
| 5591 |
cfg.physAddr = -1; |
| 5592 |
cfg.pageAddr = portnum; |
| 5593 |
cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; |
| 5594 |
cfg.dir = 0; |
| 5595 |
cfg.timeout = 0; |
| 5596 |
if (mpt_config(ioc, &cfg) != 0) |
| 5597 |
return -EFAULT; |
| 5598 |
|
| 5599 |
ioc->spi_data.sdp1version = cfg.cfghdr.hdr->PageVersion; |
| 5600 |
ioc->spi_data.sdp1length = cfg.cfghdr.hdr->PageLength; |
| 5601 |
|
| 5602 |
header.PageVersion = 0; |
| 5603 |
header.PageLength = 0; |
| 5604 |
header.PageNumber = 0; |
| 5605 |
header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE; |
| 5606 |
if (mpt_config(ioc, &cfg) != 0) |
| 5607 |
return -EFAULT; |
| 5608 |
|
| 5609 |
ioc->spi_data.sdp0version = cfg.cfghdr.hdr->PageVersion; |
| 5610 |
ioc->spi_data.sdp0length = cfg.cfghdr.hdr->PageLength; |
| 5611 |
|
| 5612 |
dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Headers: 0: version %d length %d\n", |
| 5613 |
ioc->name, ioc->spi_data.sdp0version, ioc->spi_data.sdp0length)); |
| 5614 |
|
| 5615 |
dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Headers: 1: version %d length %d\n", |
| 5616 |
ioc->name, ioc->spi_data.sdp1version, ioc->spi_data.sdp1length)); |
| 5617 |
return 0; |
| 5618 |
} |
| 5619 |
|
| 5620 |
/** |
| 5621 |
* mpt_inactive_raid_list_free - This clears this link list. |
| 5622 |
* @ioc : pointer to per adapter structure |
| 5623 |
**/ |
| 5624 |
static void |
| 5625 |
mpt_inactive_raid_list_free(MPT_ADAPTER *ioc) |
| 5626 |
{ |
| 5627 |
struct inactive_raid_component_info *component_info, *pNext; |
| 5628 |
|
| 5629 |
if (list_empty(&ioc->raid_data.inactive_list)) |
| 5630 |
return; |
| 5631 |
|
| 5632 |
mutex_lock(&ioc->raid_data.inactive_list_mutex); |
| 5633 |
list_for_each_entry_safe(component_info, pNext, |
| 5634 |
&ioc->raid_data.inactive_list, list) { |
| 5635 |
list_del(&component_info->list); |
| 5636 |
kfree(component_info); |
| 5637 |
} |
| 5638 |
mutex_unlock(&ioc->raid_data.inactive_list_mutex); |
| 5639 |
} |
| 5640 |
|
| 5641 |
/** |
| 5642 |
* mpt_inactive_raid_volumes - sets up link list of phy_disk_nums for devices belonging in an inactive volume |
| 5643 |
* |
| 5644 |
* @ioc : pointer to per adapter structure |
| 5645 |
* @channel : volume channel |
| 5646 |
* @id : volume target id |
| 5647 |
**/ |
| 5648 |
static void |
| 5649 |
mpt_inactive_raid_volumes(MPT_ADAPTER *ioc, u8 channel, u8 id) |
| 5650 |
{ |
| 5651 |
CONFIGPARMS cfg; |
| 5652 |
ConfigPageHeader_t hdr; |
| 5653 |
dma_addr_t dma_handle; |
| 5654 |
pRaidVolumePage0_t buffer = NULL; |
| 5655 |
int i; |
| 5656 |
RaidPhysDiskPage0_t phys_disk; |
| 5657 |
struct inactive_raid_component_info *component_info; |
| 5658 |
int handle_inactive_volumes; |
| 5659 |
|
| 5660 |
memset(&cfg, 0 , sizeof(CONFIGPARMS)); |
| 5661 |
memset(&hdr, 0 , sizeof(ConfigPageHeader_t)); |
| 5662 |
hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_VOLUME; |
| 5663 |
cfg.pageAddr = (channel << 8) + id; |
| 5664 |
cfg.cfghdr.hdr = &hdr; |
| 5665 |
cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; |
| 5666 |
|
| 5667 |
if (mpt_config(ioc, &cfg) != 0) |
| 5668 |
goto out; |
| 5669 |
|
| 5670 |
if (!hdr.PageLength) |
| 5671 |
goto out; |
| 5672 |
|
| 5673 |
buffer = dma_alloc_coherent(&ioc->pcidev->dev, hdr.PageLength * 4, |
| 5674 |
&dma_handle, GFP_KERNEL); |
| 5675 |
|
| 5676 |
if (!buffer) |
| 5677 |
goto out; |
| 5678 |
|
| 5679 |
cfg.physAddr = dma_handle; |
| 5680 |
cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; |
| 5681 |
|
| 5682 |
if (mpt_config(ioc, &cfg) != 0) |
| 5683 |
goto out; |
| 5684 |
|
| 5685 |
if (!buffer->NumPhysDisks) |
| 5686 |
goto out; |
| 5687 |
|
| 5688 |
handle_inactive_volumes = |
| 5689 |
(buffer->VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE || |
| 5690 |
(buffer->VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_ENABLED) == 0 || |
| 5691 |
buffer->VolumeStatus.State == MPI_RAIDVOL0_STATUS_STATE_FAILED || |
| 5692 |
buffer->VolumeStatus.State == MPI_RAIDVOL0_STATUS_STATE_MISSING) ? 1 : 0; |
| 5693 |
|
| 5694 |
if (!handle_inactive_volumes) |
| 5695 |
goto out; |
| 5696 |
|
| 5697 |
mutex_lock(&ioc->raid_data.inactive_list_mutex); |
| 5698 |
for (i = 0; i < buffer->NumPhysDisks; i++) { |
| 5699 |
if(mpt_raid_phys_disk_pg0(ioc, |
| 5700 |
buffer->PhysDisk[i].PhysDiskNum, &phys_disk) != 0) |
| 5701 |
continue; |
| 5702 |
|
| 5703 |
if ((component_info = kmalloc_obj(*component_info)) == NULL) |
| 5704 |
continue; |
| 5705 |
|
| 5706 |
component_info->volumeID = id; |
| 5707 |
component_info->volumeBus = channel; |
| 5708 |
component_info->d.PhysDiskNum = phys_disk.PhysDiskNum; |
| 5709 |
component_info->d.PhysDiskBus = phys_disk.PhysDiskBus; |
| 5710 |
component_info->d.PhysDiskID = phys_disk.PhysDiskID; |
| 5711 |
component_info->d.PhysDiskIOC = phys_disk.PhysDiskIOC; |
| 5712 |
|
| 5713 |
list_add_tail(&component_info->list, |
| 5714 |
&ioc->raid_data.inactive_list); |
| 5715 |
} |
| 5716 |
mutex_unlock(&ioc->raid_data.inactive_list_mutex); |
| 5717 |
|
| 5718 |
out: |
| 5719 |
if (buffer) |
| 5720 |
dma_free_coherent(&ioc->pcidev->dev, hdr.PageLength * 4, |
| 5721 |
buffer, dma_handle); |
| 5722 |
} |
| 5723 |
|
| 5724 |
/** |
| 5725 |
* mpt_raid_phys_disk_pg0 - returns phys disk page zero |
| 5726 |
* @ioc: Pointer to a Adapter Structure |
| 5727 |
* @phys_disk_num: io unit unique phys disk num generated by the ioc |
| 5728 |
* @phys_disk: requested payload data returned |
| 5729 |
* |
| 5730 |
* Return: |
| 5731 |
* 0 on success |
| 5732 |
* -EFAULT if read of config page header fails or data pointer not NULL |
| 5733 |
* -ENOMEM if pci_alloc failed |
| 5734 |
**/ |
| 5735 |
int |
| 5736 |
mpt_raid_phys_disk_pg0(MPT_ADAPTER *ioc, u8 phys_disk_num, |
| 5737 |
RaidPhysDiskPage0_t *phys_disk) |
| 5738 |
{ |
| 5739 |
CONFIGPARMS cfg; |
| 5740 |
ConfigPageHeader_t hdr; |
| 5741 |
dma_addr_t dma_handle; |
| 5742 |
pRaidPhysDiskPage0_t buffer = NULL; |
| 5743 |
int rc; |
| 5744 |
|
| 5745 |
memset(&cfg, 0 , sizeof(CONFIGPARMS)); |
| 5746 |
memset(&hdr, 0 , sizeof(ConfigPageHeader_t)); |
| 5747 |
memset(phys_disk, 0, sizeof(RaidPhysDiskPage0_t)); |
| 5748 |
|
| 5749 |
hdr.PageVersion = MPI_RAIDPHYSDISKPAGE0_PAGEVERSION; |
| 5750 |
hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK; |
| 5751 |
cfg.cfghdr.hdr = &hdr; |
| 5752 |
cfg.physAddr = -1; |
| 5753 |
cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; |
| 5754 |
|
| 5755 |
if (mpt_config(ioc, &cfg) != 0) { |
| 5756 |
rc = -EFAULT; |
| 5757 |
goto out; |
| 5758 |
} |
| 5759 |
|
| 5760 |
if (!hdr.PageLength) { |
| 5761 |
rc = -EFAULT; |
| 5762 |
goto out; |
| 5763 |
} |
| 5764 |
|
| 5765 |
buffer = dma_alloc_coherent(&ioc->pcidev->dev, hdr.PageLength * 4, |
| 5766 |
&dma_handle, GFP_KERNEL); |
| 5767 |
|
| 5768 |
if (!buffer) { |
| 5769 |
rc = -ENOMEM; |
| 5770 |
goto out; |
| 5771 |
} |
| 5772 |
|
| 5773 |
cfg.physAddr = dma_handle; |
| 5774 |
cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; |
| 5775 |
cfg.pageAddr = phys_disk_num; |
| 5776 |
|
| 5777 |
if (mpt_config(ioc, &cfg) != 0) { |
| 5778 |
rc = -EFAULT; |
| 5779 |
goto out; |
| 5780 |
} |
| 5781 |
|
| 5782 |
rc = 0; |
| 5783 |
memcpy(phys_disk, buffer, sizeof(*buffer)); |
| 5784 |
phys_disk->MaxLBA = le32_to_cpu(buffer->MaxLBA); |
| 5785 |
|
| 5786 |
out: |
| 5787 |
|
| 5788 |
if (buffer) |
| 5789 |
dma_free_coherent(&ioc->pcidev->dev, hdr.PageLength * 4, |
| 5790 |
buffer, dma_handle); |
| 5791 |
|
| 5792 |
return rc; |
| 5793 |
} |
| 5794 |
|
| 5795 |
/** |
| 5796 |
* mpt_raid_phys_disk_get_num_paths - returns number paths associated to this phys_num |
| 5797 |
* @ioc: Pointer to a Adapter Structure |
| 5798 |
* @phys_disk_num: io unit unique phys disk num generated by the ioc |
| 5799 |
* |
| 5800 |
* Return: |
| 5801 |
* returns number paths |
| 5802 |
**/ |
| 5803 |
int |
| 5804 |
mpt_raid_phys_disk_get_num_paths(MPT_ADAPTER *ioc, u8 phys_disk_num) |
| 5805 |
{ |
| 5806 |
CONFIGPARMS cfg; |
| 5807 |
ConfigPageHeader_t hdr; |
| 5808 |
dma_addr_t dma_handle; |
| 5809 |
pRaidPhysDiskPage1_t buffer = NULL; |
| 5810 |
int rc; |
| 5811 |
|
| 5812 |
memset(&cfg, 0 , sizeof(CONFIGPARMS)); |
| 5813 |
memset(&hdr, 0 , sizeof(ConfigPageHeader_t)); |
| 5814 |
|
| 5815 |
hdr.PageVersion = MPI_RAIDPHYSDISKPAGE1_PAGEVERSION; |
| 5816 |
hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK; |
| 5817 |
hdr.PageNumber = 1; |
| 5818 |
cfg.cfghdr.hdr = &hdr; |
| 5819 |
cfg.physAddr = -1; |
| 5820 |
cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; |
| 5821 |
|
| 5822 |
if (mpt_config(ioc, &cfg) != 0) { |
| 5823 |
rc = 0; |
| 5824 |
goto out; |
| 5825 |
} |
| 5826 |
|
| 5827 |
if (!hdr.PageLength) { |
| 5828 |
rc = 0; |
| 5829 |
goto out; |
| 5830 |
} |
| 5831 |
|
| 5832 |
buffer = dma_alloc_coherent(&ioc->pcidev->dev, hdr.PageLength * 4, |
| 5833 |
&dma_handle, GFP_KERNEL); |
| 5834 |
|
| 5835 |
if (!buffer) { |
| 5836 |
rc = 0; |
| 5837 |
goto out; |
| 5838 |
} |
| 5839 |
|
| 5840 |
cfg.physAddr = dma_handle; |
| 5841 |
cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; |
| 5842 |
cfg.pageAddr = phys_disk_num; |
| 5843 |
|
| 5844 |
if (mpt_config(ioc, &cfg) != 0) { |
| 5845 |
rc = 0; |
| 5846 |
goto out; |
| 5847 |
} |
| 5848 |
|
| 5849 |
rc = buffer->NumPhysDiskPaths; |
| 5850 |
out: |
| 5851 |
|
| 5852 |
if (buffer) |
| 5853 |
dma_free_coherent(&ioc->pcidev->dev, hdr.PageLength * 4, |
| 5854 |
buffer, dma_handle); |
| 5855 |
|
| 5856 |
return rc; |
| 5857 |
} |
| 5858 |
EXPORT_SYMBOL(mpt_raid_phys_disk_get_num_paths); |
| 5859 |
|
| 5860 |
/** |
| 5861 |
* mpt_raid_phys_disk_pg1 - returns phys disk page 1 |
| 5862 |
* @ioc: Pointer to a Adapter Structure |
| 5863 |
* @phys_disk_num: io unit unique phys disk num generated by the ioc |
| 5864 |
* @phys_disk: requested payload data returned |
| 5865 |
* |
| 5866 |
* Return: |
| 5867 |
* 0 on success |
| 5868 |
* -EFAULT if read of config page header fails or data pointer not NULL |
| 5869 |
* -ENOMEM if pci_alloc failed |
| 5870 |
**/ |
| 5871 |
int |
| 5872 |
mpt_raid_phys_disk_pg1(MPT_ADAPTER *ioc, u8 phys_disk_num, |
| 5873 |
RaidPhysDiskPage1_t *phys_disk) |
| 5874 |
{ |
| 5875 |
CONFIGPARMS cfg; |
| 5876 |
ConfigPageHeader_t hdr; |
| 5877 |
dma_addr_t dma_handle; |
| 5878 |
pRaidPhysDiskPage1_t buffer = NULL; |
| 5879 |
int rc; |
| 5880 |
int i; |
| 5881 |
__le64 sas_address; |
| 5882 |
|
| 5883 |
memset(&cfg, 0 , sizeof(CONFIGPARMS)); |
| 5884 |
memset(&hdr, 0 , sizeof(ConfigPageHeader_t)); |
| 5885 |
rc = 0; |
| 5886 |
|
| 5887 |
hdr.PageVersion = MPI_RAIDPHYSDISKPAGE1_PAGEVERSION; |
| 5888 |
hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK; |
| 5889 |
hdr.PageNumber = 1; |
| 5890 |
cfg.cfghdr.hdr = &hdr; |
| 5891 |
cfg.physAddr = -1; |
| 5892 |
cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; |
| 5893 |
|
| 5894 |
if (mpt_config(ioc, &cfg) != 0) { |
| 5895 |
rc = -EFAULT; |
| 5896 |
goto out; |
| 5897 |
} |
| 5898 |
|
| 5899 |
if (!hdr.PageLength) { |
| 5900 |
rc = -EFAULT; |
| 5901 |
goto out; |
| 5902 |
} |
| 5903 |
|
| 5904 |
buffer = dma_alloc_coherent(&ioc->pcidev->dev, hdr.PageLength * 4, |
| 5905 |
&dma_handle, GFP_KERNEL); |
| 5906 |
|
| 5907 |
if (!buffer) { |
| 5908 |
rc = -ENOMEM; |
| 5909 |
goto out; |
| 5910 |
} |
| 5911 |
|
| 5912 |
cfg.physAddr = dma_handle; |
| 5913 |
cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; |
| 5914 |
cfg.pageAddr = phys_disk_num; |
| 5915 |
|
| 5916 |
if (mpt_config(ioc, &cfg) != 0) { |
| 5917 |
rc = -EFAULT; |
| 5918 |
goto out; |
| 5919 |
} |
| 5920 |
|
| 5921 |
phys_disk->NumPhysDiskPaths = buffer->NumPhysDiskPaths; |
| 5922 |
phys_disk->PhysDiskNum = phys_disk_num; |
| 5923 |
for (i = 0; i < phys_disk->NumPhysDiskPaths; i++) { |
| 5924 |
phys_disk->Path[i].PhysDiskID = buffer->Path[i].PhysDiskID; |
| 5925 |
phys_disk->Path[i].PhysDiskBus = buffer->Path[i].PhysDiskBus; |
| 5926 |
phys_disk->Path[i].OwnerIdentifier = |
| 5927 |
buffer->Path[i].OwnerIdentifier; |
| 5928 |
phys_disk->Path[i].Flags = le16_to_cpu(buffer->Path[i].Flags); |
| 5929 |
memcpy(&sas_address, &buffer->Path[i].WWID, sizeof(__le64)); |
| 5930 |
sas_address = le64_to_cpu(sas_address); |
| 5931 |
memcpy(&phys_disk->Path[i].WWID, &sas_address, sizeof(__le64)); |
| 5932 |
memcpy(&sas_address, |
| 5933 |
&buffer->Path[i].OwnerWWID, sizeof(__le64)); |
| 5934 |
sas_address = le64_to_cpu(sas_address); |
| 5935 |
memcpy(&phys_disk->Path[i].OwnerWWID, |
| 5936 |
&sas_address, sizeof(__le64)); |
| 5937 |
} |
| 5938 |
|
| 5939 |
out: |
| 5940 |
|
| 5941 |
if (buffer) |
| 5942 |
dma_free_coherent(&ioc->pcidev->dev, hdr.PageLength * 4, |
| 5943 |
buffer, dma_handle); |
| 5944 |
|
| 5945 |
return rc; |
| 5946 |
} |
| 5947 |
EXPORT_SYMBOL(mpt_raid_phys_disk_pg1); |
| 5948 |
|
| 5949 |
|
| 5950 |
/** |
| 5951 |
* mpt_findImVolumes - Identify IDs of hidden disks and RAID Volumes |
| 5952 |
* @ioc: Pointer to a Adapter Strucutre |
| 5953 |
* |
| 5954 |
* Return: |
| 5955 |
* 0 on success |
| 5956 |
* -EFAULT if read of config page header fails or data pointer not NULL |
| 5957 |
* -ENOMEM if pci_alloc failed |
| 5958 |
**/ |
| 5959 |
int |
| 5960 |
mpt_findImVolumes(MPT_ADAPTER *ioc) |
| 5961 |
{ |
| 5962 |
IOCPage2_t *pIoc2; |
| 5963 |
u8 *mem; |
| 5964 |
dma_addr_t ioc2_dma; |
| 5965 |
CONFIGPARMS cfg; |
| 5966 |
ConfigPageHeader_t header; |
| 5967 |
int rc = 0; |
| 5968 |
int iocpage2sz; |
| 5969 |
int i; |
| 5970 |
|
| 5971 |
if (!ioc->ir_firmware) |
| 5972 |
return 0; |
| 5973 |
|
| 5974 |
/* Free the old page |
| 5975 |
*/ |
| 5976 |
kfree(ioc->raid_data.pIocPg2); |
| 5977 |
ioc->raid_data.pIocPg2 = NULL; |
| 5978 |
mpt_inactive_raid_list_free(ioc); |
| 5979 |
|
| 5980 |
/* Read IOCP2 header then the page. |
| 5981 |
*/ |
| 5982 |
header.PageVersion = 0; |
| 5983 |
header.PageLength = 0; |
| 5984 |
header.PageNumber = 2; |
| 5985 |
header.PageType = MPI_CONFIG_PAGETYPE_IOC; |
| 5986 |
cfg.cfghdr.hdr = &header; |
| 5987 |
cfg.physAddr = -1; |
| 5988 |
cfg.pageAddr = 0; |
| 5989 |
cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; |
| 5990 |
cfg.dir = 0; |
| 5991 |
cfg.timeout = 0; |
| 5992 |
if (mpt_config(ioc, &cfg) != 0) |
| 5993 |
return -EFAULT; |
| 5994 |
|
| 5995 |
if (header.PageLength == 0) |
| 5996 |
return -EFAULT; |
| 5997 |
|
| 5998 |
iocpage2sz = header.PageLength * 4; |
| 5999 |
pIoc2 = dma_alloc_coherent(&ioc->pcidev->dev, iocpage2sz, &ioc2_dma, |
| 6000 |
GFP_KERNEL); |
| 6001 |
if (!pIoc2) |
| 6002 |
return -ENOMEM; |
| 6003 |
|
| 6004 |
cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; |
| 6005 |
cfg.physAddr = ioc2_dma; |
| 6006 |
if (mpt_config(ioc, &cfg) != 0) |
| 6007 |
goto out; |
| 6008 |
|
| 6009 |
mem = kmemdup(pIoc2, iocpage2sz, GFP_KERNEL); |
| 6010 |
if (!mem) { |
| 6011 |
rc = -ENOMEM; |
| 6012 |
goto out; |
| 6013 |
} |
| 6014 |
|
| 6015 |
ioc->raid_data.pIocPg2 = (IOCPage2_t *) mem; |
| 6016 |
|
| 6017 |
mpt_read_ioc_pg_3(ioc); |
| 6018 |
|
| 6019 |
for (i = 0; i < pIoc2->NumActiveVolumes ; i++) |
| 6020 |
mpt_inactive_raid_volumes(ioc, |
| 6021 |
pIoc2->RaidVolume[i].VolumeBus, |
| 6022 |
pIoc2->RaidVolume[i].VolumeID); |
| 6023 |
|
| 6024 |
out: |
| 6025 |
dma_free_coherent(&ioc->pcidev->dev, iocpage2sz, pIoc2, ioc2_dma); |
| 6026 |
|
| 6027 |
return rc; |
| 6028 |
} |
| 6029 |
|
| 6030 |
static int |
| 6031 |
mpt_read_ioc_pg_3(MPT_ADAPTER *ioc) |
| 6032 |
{ |
| 6033 |
IOCPage3_t *pIoc3; |
| 6034 |
u8 *mem; |
| 6035 |
CONFIGPARMS cfg; |
| 6036 |
ConfigPageHeader_t header; |
| 6037 |
dma_addr_t ioc3_dma; |
| 6038 |
int iocpage3sz = 0; |
| 6039 |
|
| 6040 |
/* Free the old page |
| 6041 |
*/ |
| 6042 |
kfree(ioc->raid_data.pIocPg3); |
| 6043 |
ioc->raid_data.pIocPg3 = NULL; |
| 6044 |
|
| 6045 |
/* There is at least one physical disk. |
| 6046 |
* Read and save IOC Page 3 |
| 6047 |
*/ |
| 6048 |
header.PageVersion = 0; |
| 6049 |
header.PageLength = 0; |
| 6050 |
header.PageNumber = 3; |
| 6051 |
header.PageType = MPI_CONFIG_PAGETYPE_IOC; |
| 6052 |
cfg.cfghdr.hdr = &header; |
| 6053 |
cfg.physAddr = -1; |
| 6054 |
cfg.pageAddr = 0; |
| 6055 |
cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; |
| 6056 |
cfg.dir = 0; |
| 6057 |
cfg.timeout = 0; |
| 6058 |
if (mpt_config(ioc, &cfg) != 0) |
| 6059 |
return 0; |
| 6060 |
|
| 6061 |
if (header.PageLength == 0) |
| 6062 |
return 0; |
| 6063 |
|
| 6064 |
/* Read Header good, alloc memory |
| 6065 |
*/ |
| 6066 |
iocpage3sz = header.PageLength * 4; |
| 6067 |
pIoc3 = dma_alloc_coherent(&ioc->pcidev->dev, iocpage3sz, &ioc3_dma, |
| 6068 |
GFP_KERNEL); |
| 6069 |
if (!pIoc3) |
| 6070 |
return 0; |
| 6071 |
|
| 6072 |
/* Read the Page and save the data |
| 6073 |
* into malloc'd memory. |
| 6074 |
*/ |
| 6075 |
cfg.physAddr = ioc3_dma; |
| 6076 |
cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; |
| 6077 |
if (mpt_config(ioc, &cfg) == 0) { |
| 6078 |
mem = kmalloc(iocpage3sz, GFP_KERNEL); |
| 6079 |
if (mem) { |
| 6080 |
memcpy(mem, (u8 *)pIoc3, iocpage3sz); |
| 6081 |
ioc->raid_data.pIocPg3 = (IOCPage3_t *) mem; |
| 6082 |
} |
| 6083 |
} |
| 6084 |
|
| 6085 |
dma_free_coherent(&ioc->pcidev->dev, iocpage3sz, pIoc3, ioc3_dma); |
| 6086 |
|
| 6087 |
return 0; |
| 6088 |
} |
| 6089 |
|
| 6090 |
static void |
| 6091 |
mpt_read_ioc_pg_4(MPT_ADAPTER *ioc) |
| 6092 |
{ |
| 6093 |
IOCPage4_t *pIoc4; |
| 6094 |
CONFIGPARMS cfg; |
| 6095 |
ConfigPageHeader_t header; |
| 6096 |
dma_addr_t ioc4_dma; |
| 6097 |
int iocpage4sz; |
| 6098 |
|
| 6099 |
/* Read and save IOC Page 4 |
| 6100 |
*/ |
| 6101 |
header.PageVersion = 0; |
| 6102 |
header.PageLength = 0; |
| 6103 |
header.PageNumber = 4; |
| 6104 |
header.PageType = MPI_CONFIG_PAGETYPE_IOC; |
| 6105 |
cfg.cfghdr.hdr = &header; |
| 6106 |
cfg.physAddr = -1; |
| 6107 |
cfg.pageAddr = 0; |
| 6108 |
cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; |
| 6109 |
cfg.dir = 0; |
| 6110 |
cfg.timeout = 0; |
| 6111 |
if (mpt_config(ioc, &cfg) != 0) |
| 6112 |
return; |
| 6113 |
|
| 6114 |
if (header.PageLength == 0) |
| 6115 |
return; |
| 6116 |
|
| 6117 |
if ( (pIoc4 = ioc->spi_data.pIocPg4) == NULL ) { |
| 6118 |
iocpage4sz = (header.PageLength + 4) * 4; /* Allow 4 additional SEP's */ |
| 6119 |
pIoc4 = dma_alloc_coherent(&ioc->pcidev->dev, iocpage4sz, |
| 6120 |
&ioc4_dma, GFP_KERNEL); |
| 6121 |
if (!pIoc4) |
| 6122 |
return; |
| 6123 |
ioc->alloc_total += iocpage4sz; |
| 6124 |
} else { |
| 6125 |
ioc4_dma = ioc->spi_data.IocPg4_dma; |
| 6126 |
iocpage4sz = ioc->spi_data.IocPg4Sz; |
| 6127 |
} |
| 6128 |
|
| 6129 |
/* Read the Page into dma memory. |
| 6130 |
*/ |
| 6131 |
cfg.physAddr = ioc4_dma; |
| 6132 |
cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; |
| 6133 |
if (mpt_config(ioc, &cfg) == 0) { |
| 6134 |
ioc->spi_data.pIocPg4 = (IOCPage4_t *) pIoc4; |
| 6135 |
ioc->spi_data.IocPg4_dma = ioc4_dma; |
| 6136 |
ioc->spi_data.IocPg4Sz = iocpage4sz; |
| 6137 |
} else { |
| 6138 |
dma_free_coherent(&ioc->pcidev->dev, iocpage4sz, pIoc4, |
| 6139 |
ioc4_dma); |
| 6140 |
ioc->spi_data.pIocPg4 = NULL; |
| 6141 |
ioc->alloc_total -= iocpage4sz; |
| 6142 |
} |
| 6143 |
} |
| 6144 |
|
| 6145 |
static void |
| 6146 |
mpt_read_ioc_pg_1(MPT_ADAPTER *ioc) |
| 6147 |
{ |
| 6148 |
IOCPage1_t *pIoc1; |
| 6149 |
CONFIGPARMS cfg; |
| 6150 |
ConfigPageHeader_t header; |
| 6151 |
dma_addr_t ioc1_dma; |
| 6152 |
int iocpage1sz = 0; |
| 6153 |
u32 tmp; |
| 6154 |
|
| 6155 |
/* Check the Coalescing Timeout in IOC Page 1 |
| 6156 |
*/ |
| 6157 |
header.PageVersion = 0; |
| 6158 |
header.PageLength = 0; |
| 6159 |
header.PageNumber = 1; |
| 6160 |
header.PageType = MPI_CONFIG_PAGETYPE_IOC; |
| 6161 |
cfg.cfghdr.hdr = &header; |
| 6162 |
cfg.physAddr = -1; |
| 6163 |
cfg.pageAddr = 0; |
| 6164 |
cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; |
| 6165 |
cfg.dir = 0; |
| 6166 |
cfg.timeout = 0; |
| 6167 |
if (mpt_config(ioc, &cfg) != 0) |
| 6168 |
return; |
| 6169 |
|
| 6170 |
if (header.PageLength == 0) |
| 6171 |
return; |
| 6172 |
|
| 6173 |
/* Read Header good, alloc memory |
| 6174 |
*/ |
| 6175 |
iocpage1sz = header.PageLength * 4; |
| 6176 |
pIoc1 = dma_alloc_coherent(&ioc->pcidev->dev, iocpage1sz, &ioc1_dma, |
| 6177 |
GFP_KERNEL); |
| 6178 |
if (!pIoc1) |
| 6179 |
return; |
| 6180 |
|
| 6181 |
/* Read the Page and check coalescing timeout |
| 6182 |
*/ |
| 6183 |
cfg.physAddr = ioc1_dma; |
| 6184 |
cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; |
| 6185 |
if (mpt_config(ioc, &cfg) == 0) { |
| 6186 |
|
| 6187 |
tmp = le32_to_cpu(pIoc1->Flags) & MPI_IOCPAGE1_REPLY_COALESCING; |
| 6188 |
if (tmp == MPI_IOCPAGE1_REPLY_COALESCING) { |
| 6189 |
tmp = le32_to_cpu(pIoc1->CoalescingTimeout); |
| 6190 |
|
| 6191 |
dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Coalescing Enabled Timeout = %d\n", |
| 6192 |
ioc->name, tmp)); |
| 6193 |
|
| 6194 |
if (tmp > MPT_COALESCING_TIMEOUT) { |
| 6195 |
pIoc1->CoalescingTimeout = cpu_to_le32(MPT_COALESCING_TIMEOUT); |
| 6196 |
|
| 6197 |
/* Write NVRAM and current |
| 6198 |
*/ |
| 6199 |
cfg.dir = 1; |
| 6200 |
cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT; |
| 6201 |
if (mpt_config(ioc, &cfg) == 0) { |
| 6202 |
dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Reset Current Coalescing Timeout to = %d\n", |
| 6203 |
ioc->name, MPT_COALESCING_TIMEOUT)); |
| 6204 |
|
| 6205 |
cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_NVRAM; |
| 6206 |
if (mpt_config(ioc, &cfg) == 0) { |
| 6207 |
dprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 6208 |
"Reset NVRAM Coalescing Timeout to = %d\n", |
| 6209 |
ioc->name, MPT_COALESCING_TIMEOUT)); |
| 6210 |
} else { |
| 6211 |
dprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 6212 |
"Reset NVRAM Coalescing Timeout Failed\n", |
| 6213 |
ioc->name)); |
| 6214 |
} |
| 6215 |
|
| 6216 |
} else { |
| 6217 |
dprintk(ioc, printk(MYIOC_s_WARN_FMT |
| 6218 |
"Reset of Current Coalescing Timeout Failed!\n", |
| 6219 |
ioc->name)); |
| 6220 |
} |
| 6221 |
} |
| 6222 |
|
| 6223 |
} else { |
| 6224 |
dprintk(ioc, printk(MYIOC_s_WARN_FMT "Coalescing Disabled\n", ioc->name)); |
| 6225 |
} |
| 6226 |
} |
| 6227 |
|
| 6228 |
dma_free_coherent(&ioc->pcidev->dev, iocpage1sz, pIoc1, ioc1_dma); |
| 6229 |
|
| 6230 |
return; |
| 6231 |
} |
| 6232 |
|
| 6233 |
static void |
| 6234 |
mpt_get_manufacturing_pg_0(MPT_ADAPTER *ioc) |
| 6235 |
{ |
| 6236 |
CONFIGPARMS cfg; |
| 6237 |
ConfigPageHeader_t hdr; |
| 6238 |
dma_addr_t buf_dma; |
| 6239 |
ManufacturingPage0_t *pbuf = NULL; |
| 6240 |
|
| 6241 |
memset(&cfg, 0 , sizeof(CONFIGPARMS)); |
| 6242 |
memset(&hdr, 0 , sizeof(ConfigPageHeader_t)); |
| 6243 |
|
| 6244 |
hdr.PageType = MPI_CONFIG_PAGETYPE_MANUFACTURING; |
| 6245 |
cfg.cfghdr.hdr = &hdr; |
| 6246 |
cfg.physAddr = -1; |
| 6247 |
cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; |
| 6248 |
cfg.timeout = 10; |
| 6249 |
|
| 6250 |
if (mpt_config(ioc, &cfg) != 0) |
| 6251 |
goto out; |
| 6252 |
|
| 6253 |
if (!cfg.cfghdr.hdr->PageLength) |
| 6254 |
goto out; |
| 6255 |
|
| 6256 |
cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; |
| 6257 |
pbuf = dma_alloc_coherent(&ioc->pcidev->dev, hdr.PageLength * 4, |
| 6258 |
&buf_dma, GFP_KERNEL); |
| 6259 |
if (!pbuf) |
| 6260 |
goto out; |
| 6261 |
|
| 6262 |
cfg.physAddr = buf_dma; |
| 6263 |
|
| 6264 |
if (mpt_config(ioc, &cfg) != 0) |
| 6265 |
goto out; |
| 6266 |
|
| 6267 |
memcpy(ioc->board_name, pbuf->BoardName, sizeof(ioc->board_name)); |
| 6268 |
memcpy(ioc->board_assembly, pbuf->BoardAssembly, sizeof(ioc->board_assembly)); |
| 6269 |
memcpy(ioc->board_tracer, pbuf->BoardTracerNumber, sizeof(ioc->board_tracer)); |
| 6270 |
|
| 6271 |
out: |
| 6272 |
|
| 6273 |
if (pbuf) |
| 6274 |
dma_free_coherent(&ioc->pcidev->dev, hdr.PageLength * 4, pbuf, |
| 6275 |
buf_dma); |
| 6276 |
} |
| 6277 |
|
| 6278 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 6279 |
/** |
| 6280 |
* SendEventNotification - Send EventNotification (on or off) request to adapter |
| 6281 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 6282 |
* @EvSwitch: Event switch flags |
| 6283 |
* @sleepFlag: Specifies whether the process can sleep |
| 6284 |
*/ |
| 6285 |
static int |
| 6286 |
SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch, int sleepFlag) |
| 6287 |
{ |
| 6288 |
EventNotification_t evn; |
| 6289 |
MPIDefaultReply_t reply_buf; |
| 6290 |
|
| 6291 |
memset(&evn, 0, sizeof(EventNotification_t)); |
| 6292 |
memset(&reply_buf, 0, sizeof(MPIDefaultReply_t)); |
| 6293 |
|
| 6294 |
evn.Function = MPI_FUNCTION_EVENT_NOTIFICATION; |
| 6295 |
evn.Switch = EvSwitch; |
| 6296 |
evn.MsgContext = cpu_to_le32(mpt_base_index << 16); |
| 6297 |
|
| 6298 |
devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 6299 |
"Sending EventNotification (%d) request %p\n", |
| 6300 |
ioc->name, EvSwitch, &evn)); |
| 6301 |
|
| 6302 |
return mpt_handshake_req_reply_wait(ioc, sizeof(EventNotification_t), |
| 6303 |
(u32 *)&evn, sizeof(MPIDefaultReply_t), (u16 *)&reply_buf, 30, |
| 6304 |
sleepFlag); |
| 6305 |
} |
| 6306 |
|
| 6307 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 6308 |
/** |
| 6309 |
* SendEventAck - Send EventAck request to MPT adapter. |
| 6310 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 6311 |
* @evnp: Pointer to original EventNotification request |
| 6312 |
*/ |
| 6313 |
static int |
| 6314 |
SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp) |
| 6315 |
{ |
| 6316 |
EventAck_t *pAck; |
| 6317 |
|
| 6318 |
if ((pAck = (EventAck_t *) mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) { |
| 6319 |
dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, no msg frames!!\n", |
| 6320 |
ioc->name, __func__)); |
| 6321 |
return -1; |
| 6322 |
} |
| 6323 |
|
| 6324 |
devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending EventAck\n", ioc->name)); |
| 6325 |
|
| 6326 |
pAck->Function = MPI_FUNCTION_EVENT_ACK; |
| 6327 |
pAck->ChainOffset = 0; |
| 6328 |
pAck->Reserved[0] = pAck->Reserved[1] = 0; |
| 6329 |
pAck->MsgFlags = 0; |
| 6330 |
pAck->Reserved1[0] = pAck->Reserved1[1] = pAck->Reserved1[2] = 0; |
| 6331 |
pAck->Event = evnp->Event; |
| 6332 |
pAck->EventContext = evnp->EventContext; |
| 6333 |
|
| 6334 |
mpt_put_msg_frame(mpt_base_index, ioc, (MPT_FRAME_HDR *)pAck); |
| 6335 |
|
| 6336 |
return 0; |
| 6337 |
} |
| 6338 |
|
| 6339 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 6340 |
/** |
| 6341 |
* mpt_config - Generic function to issue config message |
| 6342 |
* @ioc: Pointer to an adapter structure |
| 6343 |
* @pCfg: Pointer to a configuration structure. Struct contains |
| 6344 |
* action, page address, direction, physical address |
| 6345 |
* and pointer to a configuration page header |
| 6346 |
* Page header is updated. |
| 6347 |
* |
| 6348 |
* Returns 0 for success |
| 6349 |
* -EAGAIN if no msg frames currently available |
| 6350 |
* -EFAULT for non-successful reply or no reply (timeout) |
| 6351 |
*/ |
| 6352 |
int |
| 6353 |
mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg) |
| 6354 |
{ |
| 6355 |
Config_t *pReq; |
| 6356 |
ConfigReply_t *pReply; |
| 6357 |
ConfigExtendedPageHeader_t *pExtHdr = NULL; |
| 6358 |
MPT_FRAME_HDR *mf; |
| 6359 |
int ii; |
| 6360 |
int flagsLength; |
| 6361 |
long timeout; |
| 6362 |
int ret; |
| 6363 |
u8 page_type = 0, extend_page; |
| 6364 |
unsigned long timeleft; |
| 6365 |
unsigned long flags; |
| 6366 |
u8 issue_hard_reset = 0; |
| 6367 |
u8 retry_count = 0; |
| 6368 |
|
| 6369 |
might_sleep(); |
| 6370 |
|
| 6371 |
/* don't send a config page during diag reset */ |
| 6372 |
spin_lock_irqsave(&ioc->taskmgmt_lock, flags); |
| 6373 |
if (ioc->ioc_reset_in_progress) { |
| 6374 |
dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 6375 |
"%s: busy with host reset\n", ioc->name, __func__)); |
| 6376 |
spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); |
| 6377 |
return -EBUSY; |
| 6378 |
} |
| 6379 |
spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); |
| 6380 |
|
| 6381 |
/* don't send if no chance of success */ |
| 6382 |
if (!ioc->active || |
| 6383 |
mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_OPERATIONAL) { |
| 6384 |
dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 6385 |
"%s: ioc not operational, %d, %xh\n", |
| 6386 |
ioc->name, __func__, ioc->active, |
| 6387 |
mpt_GetIocState(ioc, 0))); |
| 6388 |
return -EFAULT; |
| 6389 |
} |
| 6390 |
|
| 6391 |
retry_config: |
| 6392 |
mutex_lock(&ioc->mptbase_cmds.mutex); |
| 6393 |
/* init the internal cmd struct */ |
| 6394 |
memset(ioc->mptbase_cmds.reply, 0 , MPT_DEFAULT_FRAME_SIZE); |
| 6395 |
INITIALIZE_MGMT_STATUS(ioc->mptbase_cmds.status) |
| 6396 |
|
| 6397 |
/* Get and Populate a free Frame |
| 6398 |
*/ |
| 6399 |
if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) { |
| 6400 |
dcprintk(ioc, printk(MYIOC_s_WARN_FMT |
| 6401 |
"mpt_config: no msg frames!\n", ioc->name)); |
| 6402 |
ret = -EAGAIN; |
| 6403 |
goto out; |
| 6404 |
} |
| 6405 |
|
| 6406 |
pReq = (Config_t *)mf; |
| 6407 |
pReq->Action = pCfg->action; |
| 6408 |
pReq->Reserved = 0; |
| 6409 |
pReq->ChainOffset = 0; |
| 6410 |
pReq->Function = MPI_FUNCTION_CONFIG; |
| 6411 |
|
| 6412 |
/* Assume page type is not extended and clear "reserved" fields. */ |
| 6413 |
pReq->ExtPageLength = 0; |
| 6414 |
pReq->ExtPageType = 0; |
| 6415 |
pReq->MsgFlags = 0; |
| 6416 |
|
| 6417 |
for (ii=0; ii < 8; ii++) |
| 6418 |
pReq->Reserved2[ii] = 0; |
| 6419 |
|
| 6420 |
pReq->Header.PageVersion = pCfg->cfghdr.hdr->PageVersion; |
| 6421 |
pReq->Header.PageLength = pCfg->cfghdr.hdr->PageLength; |
| 6422 |
pReq->Header.PageNumber = pCfg->cfghdr.hdr->PageNumber; |
| 6423 |
pReq->Header.PageType = (pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK); |
| 6424 |
|
| 6425 |
if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) == MPI_CONFIG_PAGETYPE_EXTENDED) { |
| 6426 |
pExtHdr = (ConfigExtendedPageHeader_t *)pCfg->cfghdr.ehdr; |
| 6427 |
pReq->ExtPageLength = cpu_to_le16(pExtHdr->ExtPageLength); |
| 6428 |
pReq->ExtPageType = pExtHdr->ExtPageType; |
| 6429 |
pReq->Header.PageType = MPI_CONFIG_PAGETYPE_EXTENDED; |
| 6430 |
|
| 6431 |
/* Page Length must be treated as a reserved field for the |
| 6432 |
* extended header. |
| 6433 |
*/ |
| 6434 |
pReq->Header.PageLength = 0; |
| 6435 |
} |
| 6436 |
|
| 6437 |
pReq->PageAddress = cpu_to_le32(pCfg->pageAddr); |
| 6438 |
|
| 6439 |
/* Add a SGE to the config request. |
| 6440 |
*/ |
| 6441 |
if (pCfg->dir) |
| 6442 |
flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE; |
| 6443 |
else |
| 6444 |
flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ; |
| 6445 |
|
| 6446 |
if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) == |
| 6447 |
MPI_CONFIG_PAGETYPE_EXTENDED) { |
| 6448 |
flagsLength |= pExtHdr->ExtPageLength * 4; |
| 6449 |
page_type = pReq->ExtPageType; |
| 6450 |
extend_page = 1; |
| 6451 |
} else { |
| 6452 |
flagsLength |= pCfg->cfghdr.hdr->PageLength * 4; |
| 6453 |
page_type = pReq->Header.PageType; |
| 6454 |
extend_page = 0; |
| 6455 |
} |
| 6456 |
|
| 6457 |
dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 6458 |
"Sending Config request type 0x%x, page 0x%x and action %d\n", |
| 6459 |
ioc->name, page_type, pReq->Header.PageNumber, pReq->Action)); |
| 6460 |
|
| 6461 |
ioc->add_sge((char *)&pReq->PageBufferSGE, flagsLength, pCfg->physAddr); |
| 6462 |
timeout = (pCfg->timeout < 15) ? HZ*15 : HZ*pCfg->timeout; |
| 6463 |
mpt_put_msg_frame(mpt_base_index, ioc, mf); |
| 6464 |
timeleft = wait_for_completion_timeout(&ioc->mptbase_cmds.done, |
| 6465 |
timeout); |
| 6466 |
if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) { |
| 6467 |
ret = -ETIME; |
| 6468 |
dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 6469 |
"Failed Sending Config request type 0x%x, page 0x%x," |
| 6470 |
" action %d, status %xh, time left %ld\n\n", |
| 6471 |
ioc->name, page_type, pReq->Header.PageNumber, |
| 6472 |
pReq->Action, ioc->mptbase_cmds.status, timeleft)); |
| 6473 |
if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) |
| 6474 |
goto out; |
| 6475 |
if (!timeleft) { |
| 6476 |
spin_lock_irqsave(&ioc->taskmgmt_lock, flags); |
| 6477 |
if (ioc->ioc_reset_in_progress) { |
| 6478 |
spin_unlock_irqrestore(&ioc->taskmgmt_lock, |
| 6479 |
flags); |
| 6480 |
printk(MYIOC_s_INFO_FMT "%s: host reset in" |
| 6481 |
" progress mpt_config timed out.!!\n", |
| 6482 |
__func__, ioc->name); |
| 6483 |
mutex_unlock(&ioc->mptbase_cmds.mutex); |
| 6484 |
return -EFAULT; |
| 6485 |
} |
| 6486 |
spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); |
| 6487 |
issue_hard_reset = 1; |
| 6488 |
} |
| 6489 |
goto out; |
| 6490 |
} |
| 6491 |
|
| 6492 |
if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_RF_VALID)) { |
| 6493 |
ret = -1; |
| 6494 |
goto out; |
| 6495 |
} |
| 6496 |
pReply = (ConfigReply_t *)ioc->mptbase_cmds.reply; |
| 6497 |
ret = le16_to_cpu(pReply->IOCStatus) & MPI_IOCSTATUS_MASK; |
| 6498 |
if (ret == MPI_IOCSTATUS_SUCCESS) { |
| 6499 |
if (extend_page) { |
| 6500 |
pCfg->cfghdr.ehdr->ExtPageLength = |
| 6501 |
le16_to_cpu(pReply->ExtPageLength); |
| 6502 |
pCfg->cfghdr.ehdr->ExtPageType = |
| 6503 |
pReply->ExtPageType; |
| 6504 |
} |
| 6505 |
pCfg->cfghdr.hdr->PageVersion = pReply->Header.PageVersion; |
| 6506 |
pCfg->cfghdr.hdr->PageLength = pReply->Header.PageLength; |
| 6507 |
pCfg->cfghdr.hdr->PageNumber = pReply->Header.PageNumber; |
| 6508 |
pCfg->cfghdr.hdr->PageType = pReply->Header.PageType; |
| 6509 |
|
| 6510 |
} |
| 6511 |
|
| 6512 |
if (retry_count) |
| 6513 |
printk(MYIOC_s_INFO_FMT "Retry completed " |
| 6514 |
"ret=0x%x timeleft=%ld\n", |
| 6515 |
ioc->name, ret, timeleft); |
| 6516 |
|
| 6517 |
dcprintk(ioc, printk(KERN_DEBUG "IOCStatus=%04xh, IOCLogInfo=%08xh\n", |
| 6518 |
ret, le32_to_cpu(pReply->IOCLogInfo))); |
| 6519 |
|
| 6520 |
out: |
| 6521 |
|
| 6522 |
CLEAR_MGMT_STATUS(ioc->mptbase_cmds.status) |
| 6523 |
mutex_unlock(&ioc->mptbase_cmds.mutex); |
| 6524 |
if (issue_hard_reset) { |
| 6525 |
issue_hard_reset = 0; |
| 6526 |
printk(MYIOC_s_WARN_FMT |
| 6527 |
"Issuing Reset from %s!!, doorbell=0x%08x\n", |
| 6528 |
ioc->name, __func__, mpt_GetIocState(ioc, 0)); |
| 6529 |
if (retry_count == 0) { |
| 6530 |
if (mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP) != 0) |
| 6531 |
retry_count++; |
| 6532 |
} else |
| 6533 |
mpt_HardResetHandler(ioc, CAN_SLEEP); |
| 6534 |
|
| 6535 |
mpt_free_msg_frame(ioc, mf); |
| 6536 |
/* attempt one retry for a timed out command */ |
| 6537 |
if (retry_count < 2) { |
| 6538 |
printk(MYIOC_s_INFO_FMT |
| 6539 |
"Attempting Retry Config request" |
| 6540 |
" type 0x%x, page 0x%x," |
| 6541 |
" action %d\n", ioc->name, page_type, |
| 6542 |
pCfg->cfghdr.hdr->PageNumber, pCfg->action); |
| 6543 |
retry_count++; |
| 6544 |
goto retry_config; |
| 6545 |
} |
| 6546 |
} |
| 6547 |
return ret; |
| 6548 |
|
| 6549 |
} |
| 6550 |
|
| 6551 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 6552 |
/** |
| 6553 |
* mpt_ioc_reset - Base cleanup for hard reset |
| 6554 |
* @ioc: Pointer to the adapter structure |
| 6555 |
* @reset_phase: Indicates pre- or post-reset functionality |
| 6556 |
* |
| 6557 |
* Remark: Frees resources with internally generated commands. |
| 6558 |
*/ |
| 6559 |
static int |
| 6560 |
mpt_ioc_reset(MPT_ADAPTER *ioc, int reset_phase) |
| 6561 |
{ |
| 6562 |
switch (reset_phase) { |
| 6563 |
case MPT_IOC_SETUP_RESET: |
| 6564 |
ioc->taskmgmt_quiesce_io = 1; |
| 6565 |
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 6566 |
"%s: MPT_IOC_SETUP_RESET\n", ioc->name, __func__)); |
| 6567 |
break; |
| 6568 |
case MPT_IOC_PRE_RESET: |
| 6569 |
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 6570 |
"%s: MPT_IOC_PRE_RESET\n", ioc->name, __func__)); |
| 6571 |
break; |
| 6572 |
case MPT_IOC_POST_RESET: |
| 6573 |
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 6574 |
"%s: MPT_IOC_POST_RESET\n", ioc->name, __func__)); |
| 6575 |
/* wake up mptbase_cmds */ |
| 6576 |
if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_PENDING) { |
| 6577 |
ioc->mptbase_cmds.status |= |
| 6578 |
MPT_MGMT_STATUS_DID_IOCRESET; |
| 6579 |
complete(&ioc->mptbase_cmds.done); |
| 6580 |
} |
| 6581 |
/* wake up taskmgmt_cmds */ |
| 6582 |
if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_PENDING) { |
| 6583 |
ioc->taskmgmt_cmds.status |= |
| 6584 |
MPT_MGMT_STATUS_DID_IOCRESET; |
| 6585 |
complete(&ioc->taskmgmt_cmds.done); |
| 6586 |
} |
| 6587 |
break; |
| 6588 |
default: |
| 6589 |
break; |
| 6590 |
} |
| 6591 |
|
| 6592 |
return 1; /* currently means nothing really */ |
| 6593 |
} |
| 6594 |
|
| 6595 |
|
| 6596 |
#ifdef CONFIG_PROC_FS /* { */ |
| 6597 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 6598 |
/* |
| 6599 |
* procfs (%MPT_PROCFS_MPTBASEDIR/...) support stuff... |
| 6600 |
*/ |
| 6601 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 6602 |
/** |
| 6603 |
* procmpt_create - Create %MPT_PROCFS_MPTBASEDIR entries. |
| 6604 |
* |
| 6605 |
* Returns 0 for success, non-zero for failure. |
| 6606 |
*/ |
| 6607 |
static int |
| 6608 |
procmpt_create(void) |
| 6609 |
{ |
| 6610 |
mpt_proc_root_dir = proc_mkdir(MPT_PROCFS_MPTBASEDIR, NULL); |
| 6611 |
if (mpt_proc_root_dir == NULL) |
| 6612 |
return -ENOTDIR; |
| 6613 |
|
| 6614 |
proc_create_single("summary", S_IRUGO, mpt_proc_root_dir, |
| 6615 |
mpt_summary_proc_show); |
| 6616 |
proc_create_single("version", S_IRUGO, mpt_proc_root_dir, |
| 6617 |
mpt_version_proc_show); |
| 6618 |
return 0; |
| 6619 |
} |
| 6620 |
|
| 6621 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 6622 |
/** |
| 6623 |
* procmpt_destroy - Tear down %MPT_PROCFS_MPTBASEDIR entries. |
| 6624 |
* |
| 6625 |
* Returns 0 for success, non-zero for failure. |
| 6626 |
*/ |
| 6627 |
static void |
| 6628 |
procmpt_destroy(void) |
| 6629 |
{ |
| 6630 |
remove_proc_entry("version", mpt_proc_root_dir); |
| 6631 |
remove_proc_entry("summary", mpt_proc_root_dir); |
| 6632 |
remove_proc_entry(MPT_PROCFS_MPTBASEDIR, NULL); |
| 6633 |
} |
| 6634 |
|
| 6635 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 6636 |
/* |
| 6637 |
* Handles read request from /proc/mpt/summary or /proc/mpt/iocN/summary. |
| 6638 |
*/ |
| 6639 |
static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan); |
| 6640 |
|
| 6641 |
static int mpt_summary_proc_show(struct seq_file *m, void *v) |
| 6642 |
{ |
| 6643 |
MPT_ADAPTER *ioc = m->private; |
| 6644 |
|
| 6645 |
if (ioc) { |
| 6646 |
seq_mpt_print_ioc_summary(ioc, m, 1); |
| 6647 |
} else { |
| 6648 |
list_for_each_entry(ioc, &ioc_list, list) { |
| 6649 |
seq_mpt_print_ioc_summary(ioc, m, 1); |
| 6650 |
} |
| 6651 |
} |
| 6652 |
|
| 6653 |
return 0; |
| 6654 |
} |
| 6655 |
|
| 6656 |
static int mpt_version_proc_show(struct seq_file *m, void *v) |
| 6657 |
{ |
| 6658 |
u8 cb_idx; |
| 6659 |
int scsi, fc, sas, lan, ctl, targ; |
| 6660 |
char *drvname; |
| 6661 |
|
| 6662 |
seq_printf(m, "%s-%s\n", "mptlinux", MPT_LINUX_VERSION_COMMON); |
| 6663 |
seq_printf(m, " Fusion MPT base driver\n"); |
| 6664 |
|
| 6665 |
scsi = fc = sas = lan = ctl = targ = 0; |
| 6666 |
for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { |
| 6667 |
drvname = NULL; |
| 6668 |
if (MptCallbacks[cb_idx]) { |
| 6669 |
switch (MptDriverClass[cb_idx]) { |
| 6670 |
case MPTSPI_DRIVER: |
| 6671 |
if (!scsi++) drvname = "SPI host"; |
| 6672 |
break; |
| 6673 |
case MPTFC_DRIVER: |
| 6674 |
if (!fc++) drvname = "FC host"; |
| 6675 |
break; |
| 6676 |
case MPTSAS_DRIVER: |
| 6677 |
if (!sas++) drvname = "SAS host"; |
| 6678 |
break; |
| 6679 |
case MPTLAN_DRIVER: |
| 6680 |
if (!lan++) drvname = "LAN"; |
| 6681 |
break; |
| 6682 |
case MPTSTM_DRIVER: |
| 6683 |
if (!targ++) drvname = "SCSI target"; |
| 6684 |
break; |
| 6685 |
case MPTCTL_DRIVER: |
| 6686 |
if (!ctl++) drvname = "ioctl"; |
| 6687 |
break; |
| 6688 |
} |
| 6689 |
|
| 6690 |
if (drvname) |
| 6691 |
seq_printf(m, " Fusion MPT %s driver\n", drvname); |
| 6692 |
} |
| 6693 |
} |
| 6694 |
|
| 6695 |
return 0; |
| 6696 |
} |
| 6697 |
|
| 6698 |
static int mpt_iocinfo_proc_show(struct seq_file *m, void *v) |
| 6699 |
{ |
| 6700 |
MPT_ADAPTER *ioc = m->private; |
| 6701 |
char expVer[32]; |
| 6702 |
int sz; |
| 6703 |
int p; |
| 6704 |
|
| 6705 |
mpt_get_fw_exp_ver(expVer, ioc); |
| 6706 |
|
| 6707 |
seq_printf(m, "%s:", ioc->name); |
| 6708 |
if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT) |
| 6709 |
seq_printf(m, " (f/w download boot flag set)"); |
| 6710 |
// if (ioc->facts.IOCExceptions & MPI_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL) |
| 6711 |
// seq_printf(m, " CONFIG_CHECKSUM_FAIL!"); |
| 6712 |
|
| 6713 |
seq_printf(m, "\n ProductID = 0x%04x (%s)\n", |
| 6714 |
ioc->facts.ProductID, |
| 6715 |
ioc->prod_name); |
| 6716 |
seq_printf(m, " FWVersion = 0x%08x%s", ioc->facts.FWVersion.Word, expVer); |
| 6717 |
if (ioc->facts.FWImageSize) |
| 6718 |
seq_printf(m, " (fw_size=%d)", ioc->facts.FWImageSize); |
| 6719 |
seq_printf(m, "\n MsgVersion = 0x%04x\n", ioc->facts.MsgVersion); |
| 6720 |
seq_printf(m, " FirstWhoInit = 0x%02x\n", ioc->FirstWhoInit); |
| 6721 |
seq_printf(m, " EventState = 0x%02x\n", ioc->facts.EventState); |
| 6722 |
|
| 6723 |
seq_printf(m, " CurrentHostMfaHighAddr = 0x%08x\n", |
| 6724 |
ioc->facts.CurrentHostMfaHighAddr); |
| 6725 |
seq_printf(m, " CurrentSenseBufferHighAddr = 0x%08x\n", |
| 6726 |
ioc->facts.CurrentSenseBufferHighAddr); |
| 6727 |
|
| 6728 |
seq_printf(m, " MaxChainDepth = 0x%02x frames\n", ioc->facts.MaxChainDepth); |
| 6729 |
seq_printf(m, " MinBlockSize = 0x%02x bytes\n", 4*ioc->facts.BlockSize); |
| 6730 |
|
| 6731 |
seq_printf(m, " RequestFrames @ 0x%p (Dma @ 0x%p)\n", |
| 6732 |
(void *)ioc->req_frames, (void *)(ulong)ioc->req_frames_dma); |
| 6733 |
/* |
| 6734 |
* Rounding UP to nearest 4-kB boundary here... |
| 6735 |
*/ |
| 6736 |
sz = (ioc->req_sz * ioc->req_depth) + 128; |
| 6737 |
sz = ((sz + 0x1000UL - 1UL) / 0x1000) * 0x1000; |
| 6738 |
seq_printf(m, " {CurReqSz=%d} x {CurReqDepth=%d} = %d bytes ^= 0x%x\n", |
| 6739 |
ioc->req_sz, ioc->req_depth, ioc->req_sz*ioc->req_depth, sz); |
| 6740 |
seq_printf(m, " {MaxReqSz=%d} {MaxReqDepth=%d}\n", |
| 6741 |
4*ioc->facts.RequestFrameSize, |
| 6742 |
ioc->facts.GlobalCredits); |
| 6743 |
|
| 6744 |
seq_printf(m, " Frames @ 0x%p (Dma @ 0x%p)\n", |
| 6745 |
(void *)ioc->alloc, (void *)(ulong)ioc->alloc_dma); |
| 6746 |
sz = (ioc->reply_sz * ioc->reply_depth) + 128; |
| 6747 |
seq_printf(m, " {CurRepSz=%d} x {CurRepDepth=%d} = %d bytes ^= 0x%x\n", |
| 6748 |
ioc->reply_sz, ioc->reply_depth, ioc->reply_sz*ioc->reply_depth, sz); |
| 6749 |
seq_printf(m, " {MaxRepSz=%d} {MaxRepDepth=%d}\n", |
| 6750 |
ioc->facts.CurReplyFrameSize, |
| 6751 |
ioc->facts.ReplyQueueDepth); |
| 6752 |
|
| 6753 |
seq_printf(m, " MaxDevices = %d\n", |
| 6754 |
(ioc->facts.MaxDevices==0) ? 255 : ioc->facts.MaxDevices); |
| 6755 |
seq_printf(m, " MaxBuses = %d\n", ioc->facts.MaxBuses); |
| 6756 |
|
| 6757 |
/* per-port info */ |
| 6758 |
for (p=0; p < ioc->facts.NumberOfPorts; p++) { |
| 6759 |
seq_printf(m, " PortNumber = %d (of %d)\n", |
| 6760 |
p+1, |
| 6761 |
ioc->facts.NumberOfPorts); |
| 6762 |
if (ioc->bus_type == FC) { |
| 6763 |
if (ioc->pfacts[p].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) { |
| 6764 |
u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow; |
| 6765 |
seq_printf(m, " LanAddr = %pMR\n", a); |
| 6766 |
} |
| 6767 |
seq_printf(m, " WWN = %08X%08X:%08X%08X\n", |
| 6768 |
ioc->fc_port_page0[p].WWNN.High, |
| 6769 |
ioc->fc_port_page0[p].WWNN.Low, |
| 6770 |
ioc->fc_port_page0[p].WWPN.High, |
| 6771 |
ioc->fc_port_page0[p].WWPN.Low); |
| 6772 |
} |
| 6773 |
} |
| 6774 |
|
| 6775 |
return 0; |
| 6776 |
} |
| 6777 |
#endif /* CONFIG_PROC_FS } */ |
| 6778 |
|
| 6779 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 6780 |
static void |
| 6781 |
mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc) |
| 6782 |
{ |
| 6783 |
buf[0] ='\0'; |
| 6784 |
if ((ioc->facts.FWVersion.Word >> 24) == 0x0E) { |
| 6785 |
sprintf(buf, " (Exp %02d%02d)", |
| 6786 |
(ioc->facts.FWVersion.Word >> 16) & 0x00FF, /* Month */ |
| 6787 |
(ioc->facts.FWVersion.Word >> 8) & 0x1F); /* Day */ |
| 6788 |
|
| 6789 |
/* insider hack! */ |
| 6790 |
if ((ioc->facts.FWVersion.Word >> 8) & 0x80) |
| 6791 |
strcat(buf, " [MDBG]"); |
| 6792 |
} |
| 6793 |
} |
| 6794 |
|
| 6795 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 6796 |
/** |
| 6797 |
* mpt_print_ioc_summary - Write ASCII summary of IOC to a buffer. |
| 6798 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 6799 |
* @buffer: Pointer to buffer where IOC summary info should be written |
| 6800 |
* @size: Pointer to number of bytes we wrote (set by this routine) |
| 6801 |
* @len: Offset at which to start writing in buffer |
| 6802 |
* @showlan: Display LAN stuff? |
| 6803 |
* |
| 6804 |
* This routine writes (english readable) ASCII text, which represents |
| 6805 |
* a summary of IOC information, to a buffer. |
| 6806 |
*/ |
| 6807 |
void |
| 6808 |
mpt_print_ioc_summary(MPT_ADAPTER *ioc, char *buffer, int *size, int len, int showlan) |
| 6809 |
{ |
| 6810 |
char expVer[32]; |
| 6811 |
int y; |
| 6812 |
|
| 6813 |
mpt_get_fw_exp_ver(expVer, ioc); |
| 6814 |
|
| 6815 |
/* |
| 6816 |
* Shorter summary of attached ioc's... |
| 6817 |
*/ |
| 6818 |
y = sprintf(buffer+len, "%s: %s, %s%08xh%s, Ports=%d, MaxQ=%d", |
| 6819 |
ioc->name, |
| 6820 |
ioc->prod_name, |
| 6821 |
MPT_FW_REV_MAGIC_ID_STRING, /* "FwRev=" or somesuch */ |
| 6822 |
ioc->facts.FWVersion.Word, |
| 6823 |
expVer, |
| 6824 |
ioc->facts.NumberOfPorts, |
| 6825 |
ioc->req_depth); |
| 6826 |
|
| 6827 |
if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) { |
| 6828 |
u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow; |
| 6829 |
y += sprintf(buffer+len+y, ", LanAddr=%pMR", a); |
| 6830 |
} |
| 6831 |
|
| 6832 |
y += sprintf(buffer+len+y, ", IRQ=%d", ioc->pci_irq); |
| 6833 |
|
| 6834 |
if (!ioc->active) |
| 6835 |
y += sprintf(buffer+len+y, " (disabled)"); |
| 6836 |
|
| 6837 |
y += sprintf(buffer+len+y, "\n"); |
| 6838 |
|
| 6839 |
*size = y; |
| 6840 |
} |
| 6841 |
|
| 6842 |
#ifdef CONFIG_PROC_FS |
| 6843 |
static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan) |
| 6844 |
{ |
| 6845 |
char expVer[32]; |
| 6846 |
|
| 6847 |
mpt_get_fw_exp_ver(expVer, ioc); |
| 6848 |
|
| 6849 |
/* |
| 6850 |
* Shorter summary of attached ioc's... |
| 6851 |
*/ |
| 6852 |
seq_printf(m, "%s: %s, %s%08xh%s, Ports=%d, MaxQ=%d", |
| 6853 |
ioc->name, |
| 6854 |
ioc->prod_name, |
| 6855 |
MPT_FW_REV_MAGIC_ID_STRING, /* "FwRev=" or somesuch */ |
| 6856 |
ioc->facts.FWVersion.Word, |
| 6857 |
expVer, |
| 6858 |
ioc->facts.NumberOfPorts, |
| 6859 |
ioc->req_depth); |
| 6860 |
|
| 6861 |
if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) { |
| 6862 |
u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow; |
| 6863 |
seq_printf(m, ", LanAddr=%pMR", a); |
| 6864 |
} |
| 6865 |
|
| 6866 |
seq_printf(m, ", IRQ=%d", ioc->pci_irq); |
| 6867 |
|
| 6868 |
if (!ioc->active) |
| 6869 |
seq_printf(m, " (disabled)"); |
| 6870 |
|
| 6871 |
seq_putc(m, '\n'); |
| 6872 |
} |
| 6873 |
#endif |
| 6874 |
|
| 6875 |
/** |
| 6876 |
* mpt_set_taskmgmt_in_progress_flag - set flags associated with task management |
| 6877 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 6878 |
* |
| 6879 |
* Returns 0 for SUCCESS or -1 if FAILED. |
| 6880 |
* |
| 6881 |
* If -1 is return, then it was not possible to set the flags |
| 6882 |
**/ |
| 6883 |
int |
| 6884 |
mpt_set_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc) |
| 6885 |
{ |
| 6886 |
unsigned long flags; |
| 6887 |
int retval; |
| 6888 |
|
| 6889 |
spin_lock_irqsave(&ioc->taskmgmt_lock, flags); |
| 6890 |
if (ioc->ioc_reset_in_progress || ioc->taskmgmt_in_progress || |
| 6891 |
(ioc->alt_ioc && ioc->alt_ioc->taskmgmt_in_progress)) { |
| 6892 |
retval = -1; |
| 6893 |
goto out; |
| 6894 |
} |
| 6895 |
retval = 0; |
| 6896 |
ioc->taskmgmt_in_progress = 1; |
| 6897 |
ioc->taskmgmt_quiesce_io = 1; |
| 6898 |
if (ioc->alt_ioc) { |
| 6899 |
ioc->alt_ioc->taskmgmt_in_progress = 1; |
| 6900 |
ioc->alt_ioc->taskmgmt_quiesce_io = 1; |
| 6901 |
} |
| 6902 |
out: |
| 6903 |
spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); |
| 6904 |
return retval; |
| 6905 |
} |
| 6906 |
EXPORT_SYMBOL(mpt_set_taskmgmt_in_progress_flag); |
| 6907 |
|
| 6908 |
/** |
| 6909 |
* mpt_clear_taskmgmt_in_progress_flag - clear flags associated with task management |
| 6910 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 6911 |
* |
| 6912 |
**/ |
| 6913 |
void |
| 6914 |
mpt_clear_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc) |
| 6915 |
{ |
| 6916 |
unsigned long flags; |
| 6917 |
|
| 6918 |
spin_lock_irqsave(&ioc->taskmgmt_lock, flags); |
| 6919 |
ioc->taskmgmt_in_progress = 0; |
| 6920 |
ioc->taskmgmt_quiesce_io = 0; |
| 6921 |
if (ioc->alt_ioc) { |
| 6922 |
ioc->alt_ioc->taskmgmt_in_progress = 0; |
| 6923 |
ioc->alt_ioc->taskmgmt_quiesce_io = 0; |
| 6924 |
} |
| 6925 |
spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); |
| 6926 |
} |
| 6927 |
EXPORT_SYMBOL(mpt_clear_taskmgmt_in_progress_flag); |
| 6928 |
|
| 6929 |
|
| 6930 |
/** |
| 6931 |
* mpt_halt_firmware - Halts the firmware if it is operational and panic |
| 6932 |
* the kernel |
| 6933 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 6934 |
* |
| 6935 |
**/ |
| 6936 |
void __noreturn |
| 6937 |
mpt_halt_firmware(MPT_ADAPTER *ioc) |
| 6938 |
{ |
| 6939 |
u32 ioc_raw_state; |
| 6940 |
|
| 6941 |
ioc_raw_state = mpt_GetIocState(ioc, 0); |
| 6942 |
|
| 6943 |
if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) { |
| 6944 |
printk(MYIOC_s_ERR_FMT "IOC is in FAULT state (%04xh)!!!\n", |
| 6945 |
ioc->name, ioc_raw_state & MPI_DOORBELL_DATA_MASK); |
| 6946 |
panic("%s: IOC Fault (%04xh)!!!\n", ioc->name, |
| 6947 |
ioc_raw_state & MPI_DOORBELL_DATA_MASK); |
| 6948 |
} else { |
| 6949 |
CHIPREG_WRITE32(&ioc->chip->Doorbell, 0xC0FFEE00); |
| 6950 |
panic("%s: Firmware is halted due to command timeout\n", |
| 6951 |
ioc->name); |
| 6952 |
} |
| 6953 |
} |
| 6954 |
EXPORT_SYMBOL(mpt_halt_firmware); |
| 6955 |
|
| 6956 |
/** |
| 6957 |
* mpt_SoftResetHandler - Issues a less expensive reset |
| 6958 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 6959 |
* @sleepFlag: Indicates if sleep or schedule must be called. |
| 6960 |
* |
| 6961 |
* Returns 0 for SUCCESS or -1 if FAILED. |
| 6962 |
* |
| 6963 |
* Message Unit Reset - instructs the IOC to reset the Reply Post and |
| 6964 |
* Free FIFO's. All the Message Frames on Reply Free FIFO are discarded. |
| 6965 |
* All posted buffers are freed, and event notification is turned off. |
| 6966 |
* IOC doesn't reply to any outstanding request. This will transfer IOC |
| 6967 |
* to READY state. |
| 6968 |
**/ |
| 6969 |
static int |
| 6970 |
mpt_SoftResetHandler(MPT_ADAPTER *ioc, int sleepFlag) |
| 6971 |
{ |
| 6972 |
int rc; |
| 6973 |
int ii; |
| 6974 |
u8 cb_idx; |
| 6975 |
unsigned long flags; |
| 6976 |
u32 ioc_state; |
| 6977 |
unsigned long time_count; |
| 6978 |
|
| 6979 |
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SoftResetHandler Entered!\n", |
| 6980 |
ioc->name)); |
| 6981 |
|
| 6982 |
ioc_state = mpt_GetIocState(ioc, 0) & MPI_IOC_STATE_MASK; |
| 6983 |
|
| 6984 |
if (mpt_fwfault_debug) |
| 6985 |
mpt_halt_firmware(ioc); |
| 6986 |
|
| 6987 |
if (ioc_state == MPI_IOC_STATE_FAULT || |
| 6988 |
ioc_state == MPI_IOC_STATE_RESET) { |
| 6989 |
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 6990 |
"skipping, either in FAULT or RESET state!\n", ioc->name)); |
| 6991 |
return -1; |
| 6992 |
} |
| 6993 |
|
| 6994 |
if (ioc->bus_type == FC) { |
| 6995 |
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 6996 |
"skipping, because the bus type is FC!\n", ioc->name)); |
| 6997 |
return -1; |
| 6998 |
} |
| 6999 |
|
| 7000 |
spin_lock_irqsave(&ioc->taskmgmt_lock, flags); |
| 7001 |
if (ioc->ioc_reset_in_progress) { |
| 7002 |
spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); |
| 7003 |
return -1; |
| 7004 |
} |
| 7005 |
ioc->ioc_reset_in_progress = 1; |
| 7006 |
spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); |
| 7007 |
|
| 7008 |
for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { |
| 7009 |
if (MptResetHandlers[cb_idx]) |
| 7010 |
mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET); |
| 7011 |
} |
| 7012 |
|
| 7013 |
spin_lock_irqsave(&ioc->taskmgmt_lock, flags); |
| 7014 |
if (ioc->taskmgmt_in_progress) { |
| 7015 |
ioc->ioc_reset_in_progress = 0; |
| 7016 |
spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); |
| 7017 |
return -1; |
| 7018 |
} |
| 7019 |
spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); |
| 7020 |
/* Disable reply interrupts (also blocks FreeQ) */ |
| 7021 |
CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF); |
| 7022 |
ioc->active = 0; |
| 7023 |
time_count = jiffies; |
| 7024 |
|
| 7025 |
rc = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag); |
| 7026 |
|
| 7027 |
for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { |
| 7028 |
if (MptResetHandlers[cb_idx]) |
| 7029 |
mpt_signal_reset(cb_idx, ioc, MPT_IOC_PRE_RESET); |
| 7030 |
} |
| 7031 |
|
| 7032 |
if (rc) |
| 7033 |
goto out; |
| 7034 |
|
| 7035 |
ioc_state = mpt_GetIocState(ioc, 0) & MPI_IOC_STATE_MASK; |
| 7036 |
if (ioc_state != MPI_IOC_STATE_READY) |
| 7037 |
goto out; |
| 7038 |
|
| 7039 |
for (ii = 0; ii < 5; ii++) { |
| 7040 |
/* Get IOC facts! Allow 5 retries */ |
| 7041 |
rc = GetIocFacts(ioc, sleepFlag, |
| 7042 |
MPT_HOSTEVENT_IOC_RECOVER); |
| 7043 |
if (rc == 0) |
| 7044 |
break; |
| 7045 |
if (sleepFlag == CAN_SLEEP) |
| 7046 |
msleep(100); |
| 7047 |
else |
| 7048 |
mdelay(100); |
| 7049 |
} |
| 7050 |
if (ii == 5) |
| 7051 |
goto out; |
| 7052 |
|
| 7053 |
rc = PrimeIocFifos(ioc); |
| 7054 |
if (rc != 0) |
| 7055 |
goto out; |
| 7056 |
|
| 7057 |
rc = SendIocInit(ioc, sleepFlag); |
| 7058 |
if (rc != 0) |
| 7059 |
goto out; |
| 7060 |
|
| 7061 |
rc = SendEventNotification(ioc, 1, sleepFlag); |
| 7062 |
if (rc != 0) |
| 7063 |
goto out; |
| 7064 |
|
| 7065 |
if (ioc->hard_resets < -1) |
| 7066 |
ioc->hard_resets++; |
| 7067 |
|
| 7068 |
/* |
| 7069 |
* At this point, we know soft reset succeeded. |
| 7070 |
*/ |
| 7071 |
|
| 7072 |
ioc->active = 1; |
| 7073 |
CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM); |
| 7074 |
|
| 7075 |
out: |
| 7076 |
spin_lock_irqsave(&ioc->taskmgmt_lock, flags); |
| 7077 |
ioc->ioc_reset_in_progress = 0; |
| 7078 |
ioc->taskmgmt_quiesce_io = 0; |
| 7079 |
ioc->taskmgmt_in_progress = 0; |
| 7080 |
spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); |
| 7081 |
|
| 7082 |
if (ioc->active) { /* otherwise, hard reset coming */ |
| 7083 |
for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { |
| 7084 |
if (MptResetHandlers[cb_idx]) |
| 7085 |
mpt_signal_reset(cb_idx, ioc, |
| 7086 |
MPT_IOC_POST_RESET); |
| 7087 |
} |
| 7088 |
} |
| 7089 |
|
| 7090 |
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 7091 |
"SoftResetHandler: completed (%d seconds): %s\n", |
| 7092 |
ioc->name, jiffies_to_msecs(jiffies - time_count)/1000, |
| 7093 |
((rc == 0) ? "SUCCESS" : "FAILED"))); |
| 7094 |
|
| 7095 |
return rc; |
| 7096 |
} |
| 7097 |
|
| 7098 |
/** |
| 7099 |
* mpt_Soft_Hard_ResetHandler - Try less expensive reset |
| 7100 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 7101 |
* @sleepFlag: Indicates if sleep or schedule must be called. |
| 7102 |
* |
| 7103 |
* Returns 0 for SUCCESS or -1 if FAILED. |
| 7104 |
* Try for softreset first, only if it fails go for expensive |
| 7105 |
* HardReset. |
| 7106 |
**/ |
| 7107 |
int |
| 7108 |
mpt_Soft_Hard_ResetHandler(MPT_ADAPTER *ioc, int sleepFlag) { |
| 7109 |
int ret = -1; |
| 7110 |
|
| 7111 |
ret = mpt_SoftResetHandler(ioc, sleepFlag); |
| 7112 |
if (ret == 0) |
| 7113 |
return ret; |
| 7114 |
ret = mpt_HardResetHandler(ioc, sleepFlag); |
| 7115 |
return ret; |
| 7116 |
} |
| 7117 |
EXPORT_SYMBOL(mpt_Soft_Hard_ResetHandler); |
| 7118 |
|
| 7119 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 7120 |
/* |
| 7121 |
* Reset Handling |
| 7122 |
*/ |
| 7123 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 7124 |
/** |
| 7125 |
* mpt_HardResetHandler - Generic reset handler |
| 7126 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 7127 |
* @sleepFlag: Indicates if sleep or schedule must be called. |
| 7128 |
* |
| 7129 |
* Issues SCSI Task Management call based on input arg values. |
| 7130 |
* If TaskMgmt fails, returns associated SCSI request. |
| 7131 |
* |
| 7132 |
* Remark: _HardResetHandler can be invoked from an interrupt thread (timer) |
| 7133 |
* or a non-interrupt thread. In the former, must not call schedule(). |
| 7134 |
* |
| 7135 |
* Note: A return of -1 is a FATAL error case, as it means a |
| 7136 |
* FW reload/initialization failed. |
| 7137 |
* |
| 7138 |
* Returns 0 for SUCCESS or -1 if FAILED. |
| 7139 |
*/ |
| 7140 |
int |
| 7141 |
mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag) |
| 7142 |
{ |
| 7143 |
int rc; |
| 7144 |
u8 cb_idx; |
| 7145 |
unsigned long flags; |
| 7146 |
unsigned long time_count; |
| 7147 |
|
| 7148 |
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HardResetHandler Entered!\n", ioc->name)); |
| 7149 |
#ifdef MFCNT |
| 7150 |
printk(MYIOC_s_INFO_FMT "HardResetHandler Entered!\n", ioc->name); |
| 7151 |
printk("MF count 0x%x !\n", ioc->mfcnt); |
| 7152 |
#endif |
| 7153 |
if (mpt_fwfault_debug) |
| 7154 |
mpt_halt_firmware(ioc); |
| 7155 |
|
| 7156 |
/* Reset the adapter. Prevent more than 1 call to |
| 7157 |
* mpt_do_ioc_recovery at any instant in time. |
| 7158 |
*/ |
| 7159 |
spin_lock_irqsave(&ioc->taskmgmt_lock, flags); |
| 7160 |
if (ioc->ioc_reset_in_progress) { |
| 7161 |
spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); |
| 7162 |
ioc->wait_on_reset_completion = 1; |
| 7163 |
do { |
| 7164 |
ssleep(1); |
| 7165 |
} while (ioc->ioc_reset_in_progress == 1); |
| 7166 |
ioc->wait_on_reset_completion = 0; |
| 7167 |
return ioc->reset_status; |
| 7168 |
} |
| 7169 |
if (ioc->wait_on_reset_completion) { |
| 7170 |
spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); |
| 7171 |
rc = 0; |
| 7172 |
time_count = jiffies; |
| 7173 |
goto exit; |
| 7174 |
} |
| 7175 |
ioc->ioc_reset_in_progress = 1; |
| 7176 |
if (ioc->alt_ioc) |
| 7177 |
ioc->alt_ioc->ioc_reset_in_progress = 1; |
| 7178 |
spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); |
| 7179 |
|
| 7180 |
|
| 7181 |
/* The SCSI driver needs to adjust timeouts on all current |
| 7182 |
* commands prior to the diagnostic reset being issued. |
| 7183 |
* Prevents timeouts occurring during a diagnostic reset...very bad. |
| 7184 |
* For all other protocol drivers, this is a no-op. |
| 7185 |
*/ |
| 7186 |
for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { |
| 7187 |
if (MptResetHandlers[cb_idx]) { |
| 7188 |
mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET); |
| 7189 |
if (ioc->alt_ioc) |
| 7190 |
mpt_signal_reset(cb_idx, ioc->alt_ioc, |
| 7191 |
MPT_IOC_SETUP_RESET); |
| 7192 |
} |
| 7193 |
} |
| 7194 |
|
| 7195 |
time_count = jiffies; |
| 7196 |
rc = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_RECOVER, sleepFlag); |
| 7197 |
if (rc != 0) { |
| 7198 |
printk(KERN_WARNING MYNAM |
| 7199 |
": WARNING - (%d) Cannot recover %s, doorbell=0x%08x\n", |
| 7200 |
rc, ioc->name, mpt_GetIocState(ioc, 0)); |
| 7201 |
} else { |
| 7202 |
if (ioc->hard_resets < -1) |
| 7203 |
ioc->hard_resets++; |
| 7204 |
} |
| 7205 |
|
| 7206 |
spin_lock_irqsave(&ioc->taskmgmt_lock, flags); |
| 7207 |
ioc->ioc_reset_in_progress = 0; |
| 7208 |
ioc->taskmgmt_quiesce_io = 0; |
| 7209 |
ioc->taskmgmt_in_progress = 0; |
| 7210 |
ioc->reset_status = rc; |
| 7211 |
if (ioc->alt_ioc) { |
| 7212 |
ioc->alt_ioc->ioc_reset_in_progress = 0; |
| 7213 |
ioc->alt_ioc->taskmgmt_quiesce_io = 0; |
| 7214 |
ioc->alt_ioc->taskmgmt_in_progress = 0; |
| 7215 |
} |
| 7216 |
spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); |
| 7217 |
|
| 7218 |
for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { |
| 7219 |
if (MptResetHandlers[cb_idx]) { |
| 7220 |
mpt_signal_reset(cb_idx, ioc, MPT_IOC_POST_RESET); |
| 7221 |
if (ioc->alt_ioc) |
| 7222 |
mpt_signal_reset(cb_idx, |
| 7223 |
ioc->alt_ioc, MPT_IOC_POST_RESET); |
| 7224 |
} |
| 7225 |
} |
| 7226 |
exit: |
| 7227 |
dtmprintk(ioc, |
| 7228 |
printk(MYIOC_s_DEBUG_FMT |
| 7229 |
"HardResetHandler: completed (%d seconds): %s\n", ioc->name, |
| 7230 |
jiffies_to_msecs(jiffies - time_count)/1000, ((rc == 0) ? |
| 7231 |
"SUCCESS" : "FAILED"))); |
| 7232 |
|
| 7233 |
return rc; |
| 7234 |
} |
| 7235 |
|
| 7236 |
#ifdef CONFIG_FUSION_LOGGING |
| 7237 |
static void |
| 7238 |
mpt_display_event_info(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply) |
| 7239 |
{ |
| 7240 |
char *ds = NULL; |
| 7241 |
u32 evData0; |
| 7242 |
int ii; |
| 7243 |
u8 event; |
| 7244 |
char *evStr = ioc->evStr; |
| 7245 |
|
| 7246 |
event = le32_to_cpu(pEventReply->Event) & 0xFF; |
| 7247 |
evData0 = le32_to_cpu(pEventReply->Data[0]); |
| 7248 |
|
| 7249 |
switch(event) { |
| 7250 |
case MPI_EVENT_NONE: |
| 7251 |
ds = "None"; |
| 7252 |
break; |
| 7253 |
case MPI_EVENT_LOG_DATA: |
| 7254 |
ds = "Log Data"; |
| 7255 |
break; |
| 7256 |
case MPI_EVENT_STATE_CHANGE: |
| 7257 |
ds = "State Change"; |
| 7258 |
break; |
| 7259 |
case MPI_EVENT_UNIT_ATTENTION: |
| 7260 |
ds = "Unit Attention"; |
| 7261 |
break; |
| 7262 |
case MPI_EVENT_IOC_BUS_RESET: |
| 7263 |
ds = "IOC Bus Reset"; |
| 7264 |
break; |
| 7265 |
case MPI_EVENT_EXT_BUS_RESET: |
| 7266 |
ds = "External Bus Reset"; |
| 7267 |
break; |
| 7268 |
case MPI_EVENT_RESCAN: |
| 7269 |
ds = "Bus Rescan Event"; |
| 7270 |
break; |
| 7271 |
case MPI_EVENT_LINK_STATUS_CHANGE: |
| 7272 |
if (evData0 == MPI_EVENT_LINK_STATUS_FAILURE) |
| 7273 |
ds = "Link Status(FAILURE) Change"; |
| 7274 |
else |
| 7275 |
ds = "Link Status(ACTIVE) Change"; |
| 7276 |
break; |
| 7277 |
case MPI_EVENT_LOOP_STATE_CHANGE: |
| 7278 |
if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LIP) |
| 7279 |
ds = "Loop State(LIP) Change"; |
| 7280 |
else if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LPE) |
| 7281 |
ds = "Loop State(LPE) Change"; |
| 7282 |
else |
| 7283 |
ds = "Loop State(LPB) Change"; |
| 7284 |
break; |
| 7285 |
case MPI_EVENT_LOGOUT: |
| 7286 |
ds = "Logout"; |
| 7287 |
break; |
| 7288 |
case MPI_EVENT_EVENT_CHANGE: |
| 7289 |
if (evData0) |
| 7290 |
ds = "Events ON"; |
| 7291 |
else |
| 7292 |
ds = "Events OFF"; |
| 7293 |
break; |
| 7294 |
case MPI_EVENT_INTEGRATED_RAID: |
| 7295 |
{ |
| 7296 |
u8 ReasonCode = (u8)(evData0 >> 16); |
| 7297 |
switch (ReasonCode) { |
| 7298 |
case MPI_EVENT_RAID_RC_VOLUME_CREATED : |
| 7299 |
ds = "Integrated Raid: Volume Created"; |
| 7300 |
break; |
| 7301 |
case MPI_EVENT_RAID_RC_VOLUME_DELETED : |
| 7302 |
ds = "Integrated Raid: Volume Deleted"; |
| 7303 |
break; |
| 7304 |
case MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED : |
| 7305 |
ds = "Integrated Raid: Volume Settings Changed"; |
| 7306 |
break; |
| 7307 |
case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED : |
| 7308 |
ds = "Integrated Raid: Volume Status Changed"; |
| 7309 |
break; |
| 7310 |
case MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED : |
| 7311 |
ds = "Integrated Raid: Volume Physdisk Changed"; |
| 7312 |
break; |
| 7313 |
case MPI_EVENT_RAID_RC_PHYSDISK_CREATED : |
| 7314 |
ds = "Integrated Raid: Physdisk Created"; |
| 7315 |
break; |
| 7316 |
case MPI_EVENT_RAID_RC_PHYSDISK_DELETED : |
| 7317 |
ds = "Integrated Raid: Physdisk Deleted"; |
| 7318 |
break; |
| 7319 |
case MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED : |
| 7320 |
ds = "Integrated Raid: Physdisk Settings Changed"; |
| 7321 |
break; |
| 7322 |
case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED : |
| 7323 |
ds = "Integrated Raid: Physdisk Status Changed"; |
| 7324 |
break; |
| 7325 |
case MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED : |
| 7326 |
ds = "Integrated Raid: Domain Validation Needed"; |
| 7327 |
break; |
| 7328 |
case MPI_EVENT_RAID_RC_SMART_DATA : |
| 7329 |
ds = "Integrated Raid; Smart Data"; |
| 7330 |
break; |
| 7331 |
case MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED : |
| 7332 |
ds = "Integrated Raid: Replace Action Started"; |
| 7333 |
break; |
| 7334 |
default: |
| 7335 |
ds = "Integrated Raid"; |
| 7336 |
break; |
| 7337 |
} |
| 7338 |
break; |
| 7339 |
} |
| 7340 |
case MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE: |
| 7341 |
ds = "SCSI Device Status Change"; |
| 7342 |
break; |
| 7343 |
case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE: |
| 7344 |
{ |
| 7345 |
u8 id = (u8)(evData0); |
| 7346 |
u8 channel = (u8)(evData0 >> 8); |
| 7347 |
u8 ReasonCode = (u8)(evData0 >> 16); |
| 7348 |
switch (ReasonCode) { |
| 7349 |
case MPI_EVENT_SAS_DEV_STAT_RC_ADDED: |
| 7350 |
snprintf(evStr, EVENT_DESCR_STR_SZ, |
| 7351 |
"SAS Device Status Change: Added: " |
| 7352 |
"id=%d channel=%d", id, channel); |
| 7353 |
break; |
| 7354 |
case MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING: |
| 7355 |
snprintf(evStr, EVENT_DESCR_STR_SZ, |
| 7356 |
"SAS Device Status Change: Deleted: " |
| 7357 |
"id=%d channel=%d", id, channel); |
| 7358 |
break; |
| 7359 |
case MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA: |
| 7360 |
snprintf(evStr, EVENT_DESCR_STR_SZ, |
| 7361 |
"SAS Device Status Change: SMART Data: " |
| 7362 |
"id=%d channel=%d", id, channel); |
| 7363 |
break; |
| 7364 |
case MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED: |
| 7365 |
snprintf(evStr, EVENT_DESCR_STR_SZ, |
| 7366 |
"SAS Device Status Change: No Persistency: " |
| 7367 |
"id=%d channel=%d", id, channel); |
| 7368 |
break; |
| 7369 |
case MPI_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED: |
| 7370 |
snprintf(evStr, EVENT_DESCR_STR_SZ, |
| 7371 |
"SAS Device Status Change: Unsupported Device " |
| 7372 |
"Discovered : id=%d channel=%d", id, channel); |
| 7373 |
break; |
| 7374 |
case MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET: |
| 7375 |
snprintf(evStr, EVENT_DESCR_STR_SZ, |
| 7376 |
"SAS Device Status Change: Internal Device " |
| 7377 |
"Reset : id=%d channel=%d", id, channel); |
| 7378 |
break; |
| 7379 |
case MPI_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL: |
| 7380 |
snprintf(evStr, EVENT_DESCR_STR_SZ, |
| 7381 |
"SAS Device Status Change: Internal Task " |
| 7382 |
"Abort : id=%d channel=%d", id, channel); |
| 7383 |
break; |
| 7384 |
case MPI_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL: |
| 7385 |
snprintf(evStr, EVENT_DESCR_STR_SZ, |
| 7386 |
"SAS Device Status Change: Internal Abort " |
| 7387 |
"Task Set : id=%d channel=%d", id, channel); |
| 7388 |
break; |
| 7389 |
case MPI_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL: |
| 7390 |
snprintf(evStr, EVENT_DESCR_STR_SZ, |
| 7391 |
"SAS Device Status Change: Internal Clear " |
| 7392 |
"Task Set : id=%d channel=%d", id, channel); |
| 7393 |
break; |
| 7394 |
case MPI_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL: |
| 7395 |
snprintf(evStr, EVENT_DESCR_STR_SZ, |
| 7396 |
"SAS Device Status Change: Internal Query " |
| 7397 |
"Task : id=%d channel=%d", id, channel); |
| 7398 |
break; |
| 7399 |
default: |
| 7400 |
snprintf(evStr, EVENT_DESCR_STR_SZ, |
| 7401 |
"SAS Device Status Change: Unknown: " |
| 7402 |
"id=%d channel=%d", id, channel); |
| 7403 |
break; |
| 7404 |
} |
| 7405 |
break; |
| 7406 |
} |
| 7407 |
case MPI_EVENT_ON_BUS_TIMER_EXPIRED: |
| 7408 |
ds = "Bus Timer Expired"; |
| 7409 |
break; |
| 7410 |
case MPI_EVENT_QUEUE_FULL: |
| 7411 |
{ |
| 7412 |
u16 curr_depth = (u16)(evData0 >> 16); |
| 7413 |
u8 channel = (u8)(evData0 >> 8); |
| 7414 |
u8 id = (u8)(evData0); |
| 7415 |
|
| 7416 |
snprintf(evStr, EVENT_DESCR_STR_SZ, |
| 7417 |
"Queue Full: channel=%d id=%d depth=%d", |
| 7418 |
channel, id, curr_depth); |
| 7419 |
break; |
| 7420 |
} |
| 7421 |
case MPI_EVENT_SAS_SES: |
| 7422 |
ds = "SAS SES Event"; |
| 7423 |
break; |
| 7424 |
case MPI_EVENT_PERSISTENT_TABLE_FULL: |
| 7425 |
ds = "Persistent Table Full"; |
| 7426 |
break; |
| 7427 |
case MPI_EVENT_SAS_PHY_LINK_STATUS: |
| 7428 |
{ |
| 7429 |
u8 LinkRates = (u8)(evData0 >> 8); |
| 7430 |
u8 PhyNumber = (u8)(evData0); |
| 7431 |
LinkRates = (LinkRates & MPI_EVENT_SAS_PLS_LR_CURRENT_MASK) >> |
| 7432 |
MPI_EVENT_SAS_PLS_LR_CURRENT_SHIFT; |
| 7433 |
switch (LinkRates) { |
| 7434 |
case MPI_EVENT_SAS_PLS_LR_RATE_UNKNOWN: |
| 7435 |
snprintf(evStr, EVENT_DESCR_STR_SZ, |
| 7436 |
"SAS PHY Link Status: Phy=%d:" |
| 7437 |
" Rate Unknown",PhyNumber); |
| 7438 |
break; |
| 7439 |
case MPI_EVENT_SAS_PLS_LR_RATE_PHY_DISABLED: |
| 7440 |
snprintf(evStr, EVENT_DESCR_STR_SZ, |
| 7441 |
"SAS PHY Link Status: Phy=%d:" |
| 7442 |
" Phy Disabled",PhyNumber); |
| 7443 |
break; |
| 7444 |
case MPI_EVENT_SAS_PLS_LR_RATE_FAILED_SPEED_NEGOTIATION: |
| 7445 |
snprintf(evStr, EVENT_DESCR_STR_SZ, |
| 7446 |
"SAS PHY Link Status: Phy=%d:" |
| 7447 |
" Failed Speed Nego",PhyNumber); |
| 7448 |
break; |
| 7449 |
case MPI_EVENT_SAS_PLS_LR_RATE_SATA_OOB_COMPLETE: |
| 7450 |
snprintf(evStr, EVENT_DESCR_STR_SZ, |
| 7451 |
"SAS PHY Link Status: Phy=%d:" |
| 7452 |
" Sata OOB Completed",PhyNumber); |
| 7453 |
break; |
| 7454 |
case MPI_EVENT_SAS_PLS_LR_RATE_1_5: |
| 7455 |
snprintf(evStr, EVENT_DESCR_STR_SZ, |
| 7456 |
"SAS PHY Link Status: Phy=%d:" |
| 7457 |
" Rate 1.5 Gbps",PhyNumber); |
| 7458 |
break; |
| 7459 |
case MPI_EVENT_SAS_PLS_LR_RATE_3_0: |
| 7460 |
snprintf(evStr, EVENT_DESCR_STR_SZ, |
| 7461 |
"SAS PHY Link Status: Phy=%d:" |
| 7462 |
" Rate 3.0 Gbps", PhyNumber); |
| 7463 |
break; |
| 7464 |
case MPI_EVENT_SAS_PLS_LR_RATE_6_0: |
| 7465 |
snprintf(evStr, EVENT_DESCR_STR_SZ, |
| 7466 |
"SAS PHY Link Status: Phy=%d:" |
| 7467 |
" Rate 6.0 Gbps", PhyNumber); |
| 7468 |
break; |
| 7469 |
default: |
| 7470 |
snprintf(evStr, EVENT_DESCR_STR_SZ, |
| 7471 |
"SAS PHY Link Status: Phy=%d", PhyNumber); |
| 7472 |
break; |
| 7473 |
} |
| 7474 |
break; |
| 7475 |
} |
| 7476 |
case MPI_EVENT_SAS_DISCOVERY_ERROR: |
| 7477 |
ds = "SAS Discovery Error"; |
| 7478 |
break; |
| 7479 |
case MPI_EVENT_IR_RESYNC_UPDATE: |
| 7480 |
{ |
| 7481 |
u8 resync_complete = (u8)(evData0 >> 16); |
| 7482 |
snprintf(evStr, EVENT_DESCR_STR_SZ, |
| 7483 |
"IR Resync Update: Complete = %d:",resync_complete); |
| 7484 |
break; |
| 7485 |
} |
| 7486 |
case MPI_EVENT_IR2: |
| 7487 |
{ |
| 7488 |
u8 id = (u8)(evData0); |
| 7489 |
u8 channel = (u8)(evData0 >> 8); |
| 7490 |
u8 phys_num = (u8)(evData0 >> 24); |
| 7491 |
u8 ReasonCode = (u8)(evData0 >> 16); |
| 7492 |
|
| 7493 |
switch (ReasonCode) { |
| 7494 |
case MPI_EVENT_IR2_RC_LD_STATE_CHANGED: |
| 7495 |
snprintf(evStr, EVENT_DESCR_STR_SZ, |
| 7496 |
"IR2: LD State Changed: " |
| 7497 |
"id=%d channel=%d phys_num=%d", |
| 7498 |
id, channel, phys_num); |
| 7499 |
break; |
| 7500 |
case MPI_EVENT_IR2_RC_PD_STATE_CHANGED: |
| 7501 |
snprintf(evStr, EVENT_DESCR_STR_SZ, |
| 7502 |
"IR2: PD State Changed " |
| 7503 |
"id=%d channel=%d phys_num=%d", |
| 7504 |
id, channel, phys_num); |
| 7505 |
break; |
| 7506 |
case MPI_EVENT_IR2_RC_BAD_BLOCK_TABLE_FULL: |
| 7507 |
snprintf(evStr, EVENT_DESCR_STR_SZ, |
| 7508 |
"IR2: Bad Block Table Full: " |
| 7509 |
"id=%d channel=%d phys_num=%d", |
| 7510 |
id, channel, phys_num); |
| 7511 |
break; |
| 7512 |
case MPI_EVENT_IR2_RC_PD_INSERTED: |
| 7513 |
snprintf(evStr, EVENT_DESCR_STR_SZ, |
| 7514 |
"IR2: PD Inserted: " |
| 7515 |
"id=%d channel=%d phys_num=%d", |
| 7516 |
id, channel, phys_num); |
| 7517 |
break; |
| 7518 |
case MPI_EVENT_IR2_RC_PD_REMOVED: |
| 7519 |
snprintf(evStr, EVENT_DESCR_STR_SZ, |
| 7520 |
"IR2: PD Removed: " |
| 7521 |
"id=%d channel=%d phys_num=%d", |
| 7522 |
id, channel, phys_num); |
| 7523 |
break; |
| 7524 |
case MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED: |
| 7525 |
snprintf(evStr, EVENT_DESCR_STR_SZ, |
| 7526 |
"IR2: Foreign CFG Detected: " |
| 7527 |
"id=%d channel=%d phys_num=%d", |
| 7528 |
id, channel, phys_num); |
| 7529 |
break; |
| 7530 |
case MPI_EVENT_IR2_RC_REBUILD_MEDIUM_ERROR: |
| 7531 |
snprintf(evStr, EVENT_DESCR_STR_SZ, |
| 7532 |
"IR2: Rebuild Medium Error: " |
| 7533 |
"id=%d channel=%d phys_num=%d", |
| 7534 |
id, channel, phys_num); |
| 7535 |
break; |
| 7536 |
case MPI_EVENT_IR2_RC_DUAL_PORT_ADDED: |
| 7537 |
snprintf(evStr, EVENT_DESCR_STR_SZ, |
| 7538 |
"IR2: Dual Port Added: " |
| 7539 |
"id=%d channel=%d phys_num=%d", |
| 7540 |
id, channel, phys_num); |
| 7541 |
break; |
| 7542 |
case MPI_EVENT_IR2_RC_DUAL_PORT_REMOVED: |
| 7543 |
snprintf(evStr, EVENT_DESCR_STR_SZ, |
| 7544 |
"IR2: Dual Port Removed: " |
| 7545 |
"id=%d channel=%d phys_num=%d", |
| 7546 |
id, channel, phys_num); |
| 7547 |
break; |
| 7548 |
default: |
| 7549 |
ds = "IR2"; |
| 7550 |
break; |
| 7551 |
} |
| 7552 |
break; |
| 7553 |
} |
| 7554 |
case MPI_EVENT_SAS_DISCOVERY: |
| 7555 |
{ |
| 7556 |
if (evData0) |
| 7557 |
ds = "SAS Discovery: Start"; |
| 7558 |
else |
| 7559 |
ds = "SAS Discovery: Stop"; |
| 7560 |
break; |
| 7561 |
} |
| 7562 |
case MPI_EVENT_LOG_ENTRY_ADDED: |
| 7563 |
ds = "SAS Log Entry Added"; |
| 7564 |
break; |
| 7565 |
|
| 7566 |
case MPI_EVENT_SAS_BROADCAST_PRIMITIVE: |
| 7567 |
{ |
| 7568 |
u8 phy_num = (u8)(evData0); |
| 7569 |
u8 port_num = (u8)(evData0 >> 8); |
| 7570 |
u8 port_width = (u8)(evData0 >> 16); |
| 7571 |
u8 primitive = (u8)(evData0 >> 24); |
| 7572 |
snprintf(evStr, EVENT_DESCR_STR_SZ, |
| 7573 |
"SAS Broadcast Primitive: phy=%d port=%d " |
| 7574 |
"width=%d primitive=0x%02x", |
| 7575 |
phy_num, port_num, port_width, primitive); |
| 7576 |
break; |
| 7577 |
} |
| 7578 |
|
| 7579 |
case MPI_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE: |
| 7580 |
{ |
| 7581 |
u8 reason = (u8)(evData0); |
| 7582 |
|
| 7583 |
switch (reason) { |
| 7584 |
case MPI_EVENT_SAS_INIT_RC_ADDED: |
| 7585 |
ds = "SAS Initiator Status Change: Added"; |
| 7586 |
break; |
| 7587 |
case MPI_EVENT_SAS_INIT_RC_REMOVED: |
| 7588 |
ds = "SAS Initiator Status Change: Deleted"; |
| 7589 |
break; |
| 7590 |
default: |
| 7591 |
ds = "SAS Initiator Status Change"; |
| 7592 |
break; |
| 7593 |
} |
| 7594 |
break; |
| 7595 |
} |
| 7596 |
|
| 7597 |
case MPI_EVENT_SAS_INIT_TABLE_OVERFLOW: |
| 7598 |
{ |
| 7599 |
u8 max_init = (u8)(evData0); |
| 7600 |
u8 current_init = (u8)(evData0 >> 8); |
| 7601 |
|
| 7602 |
snprintf(evStr, EVENT_DESCR_STR_SZ, |
| 7603 |
"SAS Initiator Device Table Overflow: max initiators=%02d " |
| 7604 |
"current initiators=%02d", |
| 7605 |
max_init, current_init); |
| 7606 |
break; |
| 7607 |
} |
| 7608 |
case MPI_EVENT_SAS_SMP_ERROR: |
| 7609 |
{ |
| 7610 |
u8 status = (u8)(evData0); |
| 7611 |
u8 port_num = (u8)(evData0 >> 8); |
| 7612 |
u8 result = (u8)(evData0 >> 16); |
| 7613 |
|
| 7614 |
if (status == MPI_EVENT_SAS_SMP_FUNCTION_RESULT_VALID) |
| 7615 |
snprintf(evStr, EVENT_DESCR_STR_SZ, |
| 7616 |
"SAS SMP Error: port=%d result=0x%02x", |
| 7617 |
port_num, result); |
| 7618 |
else if (status == MPI_EVENT_SAS_SMP_CRC_ERROR) |
| 7619 |
snprintf(evStr, EVENT_DESCR_STR_SZ, |
| 7620 |
"SAS SMP Error: port=%d : CRC Error", |
| 7621 |
port_num); |
| 7622 |
else if (status == MPI_EVENT_SAS_SMP_TIMEOUT) |
| 7623 |
snprintf(evStr, EVENT_DESCR_STR_SZ, |
| 7624 |
"SAS SMP Error: port=%d : Timeout", |
| 7625 |
port_num); |
| 7626 |
else if (status == MPI_EVENT_SAS_SMP_NO_DESTINATION) |
| 7627 |
snprintf(evStr, EVENT_DESCR_STR_SZ, |
| 7628 |
"SAS SMP Error: port=%d : No Destination", |
| 7629 |
port_num); |
| 7630 |
else if (status == MPI_EVENT_SAS_SMP_BAD_DESTINATION) |
| 7631 |
snprintf(evStr, EVENT_DESCR_STR_SZ, |
| 7632 |
"SAS SMP Error: port=%d : Bad Destination", |
| 7633 |
port_num); |
| 7634 |
else |
| 7635 |
snprintf(evStr, EVENT_DESCR_STR_SZ, |
| 7636 |
"SAS SMP Error: port=%d : status=0x%02x", |
| 7637 |
port_num, status); |
| 7638 |
break; |
| 7639 |
} |
| 7640 |
|
| 7641 |
case MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE: |
| 7642 |
{ |
| 7643 |
u8 reason = (u8)(evData0); |
| 7644 |
|
| 7645 |
switch (reason) { |
| 7646 |
case MPI_EVENT_SAS_EXP_RC_ADDED: |
| 7647 |
ds = "Expander Status Change: Added"; |
| 7648 |
break; |
| 7649 |
case MPI_EVENT_SAS_EXP_RC_NOT_RESPONDING: |
| 7650 |
ds = "Expander Status Change: Deleted"; |
| 7651 |
break; |
| 7652 |
default: |
| 7653 |
ds = "Expander Status Change"; |
| 7654 |
break; |
| 7655 |
} |
| 7656 |
break; |
| 7657 |
} |
| 7658 |
|
| 7659 |
/* |
| 7660 |
* MPT base "custom" events may be added here... |
| 7661 |
*/ |
| 7662 |
default: |
| 7663 |
ds = "Unknown"; |
| 7664 |
break; |
| 7665 |
} |
| 7666 |
if (ds) |
| 7667 |
strscpy(evStr, ds, EVENT_DESCR_STR_SZ); |
| 7668 |
|
| 7669 |
|
| 7670 |
devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 7671 |
"MPT event:(%02Xh) : %s\n", |
| 7672 |
ioc->name, event, evStr)); |
| 7673 |
|
| 7674 |
devtverboseprintk(ioc, printk(KERN_DEBUG MYNAM |
| 7675 |
": Event data:\n")); |
| 7676 |
for (ii = 0; ii < le16_to_cpu(pEventReply->EventDataLength); ii++) |
| 7677 |
devtverboseprintk(ioc, printk(" %08x", |
| 7678 |
le32_to_cpu(pEventReply->Data[ii]))); |
| 7679 |
devtverboseprintk(ioc, printk(KERN_DEBUG "\n")); |
| 7680 |
} |
| 7681 |
#endif |
| 7682 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 7683 |
/** |
| 7684 |
* ProcessEventNotification - Route EventNotificationReply to all event handlers |
| 7685 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 7686 |
* @pEventReply: Pointer to EventNotification reply frame |
| 7687 |
* @evHandlers: Pointer to integer, number of event handlers |
| 7688 |
* |
| 7689 |
* Routes a received EventNotificationReply to all currently registered |
| 7690 |
* event handlers. |
| 7691 |
* Returns sum of event handlers return values. |
| 7692 |
*/ |
| 7693 |
static int |
| 7694 |
ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply, int *evHandlers) |
| 7695 |
{ |
| 7696 |
u16 evDataLen; |
| 7697 |
u32 evData0 = 0; |
| 7698 |
int ii; |
| 7699 |
u8 cb_idx; |
| 7700 |
int r = 0; |
| 7701 |
int handlers = 0; |
| 7702 |
u8 event; |
| 7703 |
|
| 7704 |
/* |
| 7705 |
* Do platform normalization of values |
| 7706 |
*/ |
| 7707 |
event = le32_to_cpu(pEventReply->Event) & 0xFF; |
| 7708 |
evDataLen = le16_to_cpu(pEventReply->EventDataLength); |
| 7709 |
if (evDataLen) { |
| 7710 |
evData0 = le32_to_cpu(pEventReply->Data[0]); |
| 7711 |
} |
| 7712 |
|
| 7713 |
#ifdef CONFIG_FUSION_LOGGING |
| 7714 |
if (evDataLen) |
| 7715 |
mpt_display_event_info(ioc, pEventReply); |
| 7716 |
#endif |
| 7717 |
|
| 7718 |
/* |
| 7719 |
* Do general / base driver event processing |
| 7720 |
*/ |
| 7721 |
switch(event) { |
| 7722 |
case MPI_EVENT_EVENT_CHANGE: /* 0A */ |
| 7723 |
if (evDataLen) { |
| 7724 |
u8 evState = evData0 & 0xFF; |
| 7725 |
|
| 7726 |
/* CHECKME! What if evState unexpectedly says OFF (0)? */ |
| 7727 |
|
| 7728 |
/* Update EventState field in cached IocFacts */ |
| 7729 |
if (ioc->facts.Function) { |
| 7730 |
ioc->facts.EventState = evState; |
| 7731 |
} |
| 7732 |
} |
| 7733 |
break; |
| 7734 |
case MPI_EVENT_INTEGRATED_RAID: |
| 7735 |
mptbase_raid_process_event_data(ioc, |
| 7736 |
(MpiEventDataRaid_t *)pEventReply->Data); |
| 7737 |
break; |
| 7738 |
default: |
| 7739 |
break; |
| 7740 |
} |
| 7741 |
|
| 7742 |
/* |
| 7743 |
* Should this event be logged? Events are written sequentially. |
| 7744 |
* When buffer is full, start again at the top. |
| 7745 |
*/ |
| 7746 |
if (ioc->events && (ioc->eventTypes & ( 1 << event))) { |
| 7747 |
int idx; |
| 7748 |
|
| 7749 |
idx = ioc->eventContext % MPTCTL_EVENT_LOG_SIZE; |
| 7750 |
|
| 7751 |
ioc->events[idx].event = event; |
| 7752 |
ioc->events[idx].eventContext = ioc->eventContext; |
| 7753 |
|
| 7754 |
for (ii = 0; ii < 2; ii++) { |
| 7755 |
if (ii < evDataLen) |
| 7756 |
ioc->events[idx].data[ii] = le32_to_cpu(pEventReply->Data[ii]); |
| 7757 |
else |
| 7758 |
ioc->events[idx].data[ii] = 0; |
| 7759 |
} |
| 7760 |
|
| 7761 |
ioc->eventContext++; |
| 7762 |
} |
| 7763 |
|
| 7764 |
|
| 7765 |
/* |
| 7766 |
* Call each currently registered protocol event handler. |
| 7767 |
*/ |
| 7768 |
for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { |
| 7769 |
if (MptEvHandlers[cb_idx]) { |
| 7770 |
devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 7771 |
"Routing Event to event handler #%d\n", |
| 7772 |
ioc->name, cb_idx)); |
| 7773 |
r += (*(MptEvHandlers[cb_idx]))(ioc, pEventReply); |
| 7774 |
handlers++; |
| 7775 |
} |
| 7776 |
} |
| 7777 |
/* FIXME? Examine results here? */ |
| 7778 |
|
| 7779 |
/* |
| 7780 |
* If needed, send (a single) EventAck. |
| 7781 |
*/ |
| 7782 |
if (pEventReply->AckRequired == MPI_EVENT_NOTIFICATION_ACK_REQUIRED) { |
| 7783 |
devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| 7784 |
"EventAck required\n",ioc->name)); |
| 7785 |
if ((ii = SendEventAck(ioc, pEventReply)) != 0) { |
| 7786 |
devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SendEventAck returned %d\n", |
| 7787 |
ioc->name, ii)); |
| 7788 |
} |
| 7789 |
} |
| 7790 |
|
| 7791 |
*evHandlers = handlers; |
| 7792 |
return r; |
| 7793 |
} |
| 7794 |
|
| 7795 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 7796 |
/** |
| 7797 |
* mpt_fc_log_info - Log information returned from Fibre Channel IOC. |
| 7798 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 7799 |
* @log_info: U32 LogInfo reply word from the IOC |
| 7800 |
* |
| 7801 |
* Refer to lsi/mpi_log_fc.h. |
| 7802 |
*/ |
| 7803 |
static void |
| 7804 |
mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info) |
| 7805 |
{ |
| 7806 |
char *desc = "unknown"; |
| 7807 |
|
| 7808 |
switch (log_info & 0xFF000000) { |
| 7809 |
case MPI_IOCLOGINFO_FC_INIT_BASE: |
| 7810 |
desc = "FCP Initiator"; |
| 7811 |
break; |
| 7812 |
case MPI_IOCLOGINFO_FC_TARGET_BASE: |
| 7813 |
desc = "FCP Target"; |
| 7814 |
break; |
| 7815 |
case MPI_IOCLOGINFO_FC_LAN_BASE: |
| 7816 |
desc = "LAN"; |
| 7817 |
break; |
| 7818 |
case MPI_IOCLOGINFO_FC_MSG_BASE: |
| 7819 |
desc = "MPI Message Layer"; |
| 7820 |
break; |
| 7821 |
case MPI_IOCLOGINFO_FC_LINK_BASE: |
| 7822 |
desc = "FC Link"; |
| 7823 |
break; |
| 7824 |
case MPI_IOCLOGINFO_FC_CTX_BASE: |
| 7825 |
desc = "Context Manager"; |
| 7826 |
break; |
| 7827 |
case MPI_IOCLOGINFO_FC_INVALID_FIELD_BYTE_OFFSET: |
| 7828 |
desc = "Invalid Field Offset"; |
| 7829 |
break; |
| 7830 |
case MPI_IOCLOGINFO_FC_STATE_CHANGE: |
| 7831 |
desc = "State Change Info"; |
| 7832 |
break; |
| 7833 |
} |
| 7834 |
|
| 7835 |
printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): SubClass={%s}, Value=(0x%06x)\n", |
| 7836 |
ioc->name, log_info, desc, (log_info & 0xFFFFFF)); |
| 7837 |
} |
| 7838 |
|
| 7839 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 7840 |
/** |
| 7841 |
* mpt_spi_log_info - Log information returned from SCSI Parallel IOC. |
| 7842 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 7843 |
* @log_info: U32 LogInfo word from the IOC |
| 7844 |
* |
| 7845 |
* Refer to lsi/sp_log.h. |
| 7846 |
*/ |
| 7847 |
static void |
| 7848 |
mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info) |
| 7849 |
{ |
| 7850 |
u32 info = log_info & 0x00FF0000; |
| 7851 |
char *desc = "unknown"; |
| 7852 |
|
| 7853 |
switch (info) { |
| 7854 |
case 0x00010000: |
| 7855 |
desc = "bug! MID not found"; |
| 7856 |
break; |
| 7857 |
|
| 7858 |
case 0x00020000: |
| 7859 |
desc = "Parity Error"; |
| 7860 |
break; |
| 7861 |
|
| 7862 |
case 0x00030000: |
| 7863 |
desc = "ASYNC Outbound Overrun"; |
| 7864 |
break; |
| 7865 |
|
| 7866 |
case 0x00040000: |
| 7867 |
desc = "SYNC Offset Error"; |
| 7868 |
break; |
| 7869 |
|
| 7870 |
case 0x00050000: |
| 7871 |
desc = "BM Change"; |
| 7872 |
break; |
| 7873 |
|
| 7874 |
case 0x00060000: |
| 7875 |
desc = "Msg In Overflow"; |
| 7876 |
break; |
| 7877 |
|
| 7878 |
case 0x00070000: |
| 7879 |
desc = "DMA Error"; |
| 7880 |
break; |
| 7881 |
|
| 7882 |
case 0x00080000: |
| 7883 |
desc = "Outbound DMA Overrun"; |
| 7884 |
break; |
| 7885 |
|
| 7886 |
case 0x00090000: |
| 7887 |
desc = "Task Management"; |
| 7888 |
break; |
| 7889 |
|
| 7890 |
case 0x000A0000: |
| 7891 |
desc = "Device Problem"; |
| 7892 |
break; |
| 7893 |
|
| 7894 |
case 0x000B0000: |
| 7895 |
desc = "Invalid Phase Change"; |
| 7896 |
break; |
| 7897 |
|
| 7898 |
case 0x000C0000: |
| 7899 |
desc = "Untagged Table Size"; |
| 7900 |
break; |
| 7901 |
|
| 7902 |
} |
| 7903 |
|
| 7904 |
printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): F/W: %s\n", ioc->name, log_info, desc); |
| 7905 |
} |
| 7906 |
|
| 7907 |
/* strings for sas loginfo */ |
| 7908 |
static char *originator_str[] = { |
| 7909 |
"IOP", /* 00h */ |
| 7910 |
"PL", /* 01h */ |
| 7911 |
"IR" /* 02h */ |
| 7912 |
}; |
| 7913 |
static char *iop_code_str[] = { |
| 7914 |
NULL, /* 00h */ |
| 7915 |
"Invalid SAS Address", /* 01h */ |
| 7916 |
NULL, /* 02h */ |
| 7917 |
"Invalid Page", /* 03h */ |
| 7918 |
"Diag Message Error", /* 04h */ |
| 7919 |
"Task Terminated", /* 05h */ |
| 7920 |
"Enclosure Management", /* 06h */ |
| 7921 |
"Target Mode" /* 07h */ |
| 7922 |
}; |
| 7923 |
static char *pl_code_str[] = { |
| 7924 |
NULL, /* 00h */ |
| 7925 |
"Open Failure", /* 01h */ |
| 7926 |
"Invalid Scatter Gather List", /* 02h */ |
| 7927 |
"Wrong Relative Offset or Frame Length", /* 03h */ |
| 7928 |
"Frame Transfer Error", /* 04h */ |
| 7929 |
"Transmit Frame Connected Low", /* 05h */ |
| 7930 |
"SATA Non-NCQ RW Error Bit Set", /* 06h */ |
| 7931 |
"SATA Read Log Receive Data Error", /* 07h */ |
| 7932 |
"SATA NCQ Fail All Commands After Error", /* 08h */ |
| 7933 |
"SATA Error in Receive Set Device Bit FIS", /* 09h */ |
| 7934 |
"Receive Frame Invalid Message", /* 0Ah */ |
| 7935 |
"Receive Context Message Valid Error", /* 0Bh */ |
| 7936 |
"Receive Frame Current Frame Error", /* 0Ch */ |
| 7937 |
"SATA Link Down", /* 0Dh */ |
| 7938 |
"Discovery SATA Init W IOS", /* 0Eh */ |
| 7939 |
"Config Invalid Page", /* 0Fh */ |
| 7940 |
"Discovery SATA Init Timeout", /* 10h */ |
| 7941 |
"Reset", /* 11h */ |
| 7942 |
"Abort", /* 12h */ |
| 7943 |
"IO Not Yet Executed", /* 13h */ |
| 7944 |
"IO Executed", /* 14h */ |
| 7945 |
"Persistent Reservation Out Not Affiliation " |
| 7946 |
"Owner", /* 15h */ |
| 7947 |
"Open Transmit DMA Abort", /* 16h */ |
| 7948 |
"IO Device Missing Delay Retry", /* 17h */ |
| 7949 |
"IO Cancelled Due to Receive Error", /* 18h */ |
| 7950 |
NULL, /* 19h */ |
| 7951 |
NULL, /* 1Ah */ |
| 7952 |
NULL, /* 1Bh */ |
| 7953 |
NULL, /* 1Ch */ |
| 7954 |
NULL, /* 1Dh */ |
| 7955 |
NULL, /* 1Eh */ |
| 7956 |
NULL, /* 1Fh */ |
| 7957 |
"Enclosure Management" /* 20h */ |
| 7958 |
}; |
| 7959 |
static char *ir_code_str[] = { |
| 7960 |
"Raid Action Error", /* 00h */ |
| 7961 |
NULL, /* 00h */ |
| 7962 |
NULL, /* 01h */ |
| 7963 |
NULL, /* 02h */ |
| 7964 |
NULL, /* 03h */ |
| 7965 |
NULL, /* 04h */ |
| 7966 |
NULL, /* 05h */ |
| 7967 |
NULL, /* 06h */ |
| 7968 |
NULL /* 07h */ |
| 7969 |
}; |
| 7970 |
static char *raid_sub_code_str[] = { |
| 7971 |
NULL, /* 00h */ |
| 7972 |
"Volume Creation Failed: Data Passed too " |
| 7973 |
"Large", /* 01h */ |
| 7974 |
"Volume Creation Failed: Duplicate Volumes " |
| 7975 |
"Attempted", /* 02h */ |
| 7976 |
"Volume Creation Failed: Max Number " |
| 7977 |
"Supported Volumes Exceeded", /* 03h */ |
| 7978 |
"Volume Creation Failed: DMA Error", /* 04h */ |
| 7979 |
"Volume Creation Failed: Invalid Volume Type", /* 05h */ |
| 7980 |
"Volume Creation Failed: Error Reading " |
| 7981 |
"MFG Page 4", /* 06h */ |
| 7982 |
"Volume Creation Failed: Creating Internal " |
| 7983 |
"Structures", /* 07h */ |
| 7984 |
NULL, /* 08h */ |
| 7985 |
NULL, /* 09h */ |
| 7986 |
NULL, /* 0Ah */ |
| 7987 |
NULL, /* 0Bh */ |
| 7988 |
NULL, /* 0Ch */ |
| 7989 |
NULL, /* 0Dh */ |
| 7990 |
NULL, /* 0Eh */ |
| 7991 |
NULL, /* 0Fh */ |
| 7992 |
"Activation failed: Already Active Volume", /* 10h */ |
| 7993 |
"Activation failed: Unsupported Volume Type", /* 11h */ |
| 7994 |
"Activation failed: Too Many Active Volumes", /* 12h */ |
| 7995 |
"Activation failed: Volume ID in Use", /* 13h */ |
| 7996 |
"Activation failed: Reported Failure", /* 14h */ |
| 7997 |
"Activation failed: Importing a Volume", /* 15h */ |
| 7998 |
NULL, /* 16h */ |
| 7999 |
NULL, /* 17h */ |
| 8000 |
NULL, /* 18h */ |
| 8001 |
NULL, /* 19h */ |
| 8002 |
NULL, /* 1Ah */ |
| 8003 |
NULL, /* 1Bh */ |
| 8004 |
NULL, /* 1Ch */ |
| 8005 |
NULL, /* 1Dh */ |
| 8006 |
NULL, /* 1Eh */ |
| 8007 |
NULL, /* 1Fh */ |
| 8008 |
"Phys Disk failed: Too Many Phys Disks", /* 20h */ |
| 8009 |
"Phys Disk failed: Data Passed too Large", /* 21h */ |
| 8010 |
"Phys Disk failed: DMA Error", /* 22h */ |
| 8011 |
"Phys Disk failed: Invalid <channel:id>", /* 23h */ |
| 8012 |
"Phys Disk failed: Creating Phys Disk Config " |
| 8013 |
"Page", /* 24h */ |
| 8014 |
NULL, /* 25h */ |
| 8015 |
NULL, /* 26h */ |
| 8016 |
NULL, /* 27h */ |
| 8017 |
NULL, /* 28h */ |
| 8018 |
NULL, /* 29h */ |
| 8019 |
NULL, /* 2Ah */ |
| 8020 |
NULL, /* 2Bh */ |
| 8021 |
NULL, /* 2Ch */ |
| 8022 |
NULL, /* 2Dh */ |
| 8023 |
NULL, /* 2Eh */ |
| 8024 |
NULL, /* 2Fh */ |
| 8025 |
"Compatibility Error: IR Disabled", /* 30h */ |
| 8026 |
"Compatibility Error: Inquiry Command Failed", /* 31h */ |
| 8027 |
"Compatibility Error: Device not Direct Access " |
| 8028 |
"Device ", /* 32h */ |
| 8029 |
"Compatibility Error: Removable Device Found", /* 33h */ |
| 8030 |
"Compatibility Error: Device SCSI Version not " |
| 8031 |
"2 or Higher", /* 34h */ |
| 8032 |
"Compatibility Error: SATA Device, 48 BIT LBA " |
| 8033 |
"not Supported", /* 35h */ |
| 8034 |
"Compatibility Error: Device doesn't have " |
| 8035 |
"512 Byte Block Sizes", /* 36h */ |
| 8036 |
"Compatibility Error: Volume Type Check Failed", /* 37h */ |
| 8037 |
"Compatibility Error: Volume Type is " |
| 8038 |
"Unsupported by FW", /* 38h */ |
| 8039 |
"Compatibility Error: Disk Drive too Small for " |
| 8040 |
"use in Volume", /* 39h */ |
| 8041 |
"Compatibility Error: Phys Disk for Create " |
| 8042 |
"Volume not Found", /* 3Ah */ |
| 8043 |
"Compatibility Error: Too Many or too Few " |
| 8044 |
"Disks for Volume Type", /* 3Bh */ |
| 8045 |
"Compatibility Error: Disk stripe Sizes " |
| 8046 |
"Must be 64KB", /* 3Ch */ |
| 8047 |
"Compatibility Error: IME Size Limited to < 2TB", /* 3Dh */ |
| 8048 |
}; |
| 8049 |
|
| 8050 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 8051 |
/** |
| 8052 |
* mpt_sas_log_info - Log information returned from SAS IOC. |
| 8053 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 8054 |
* @log_info: U32 LogInfo reply word from the IOC |
| 8055 |
* @cb_idx: callback function's handle |
| 8056 |
* |
| 8057 |
* Refer to lsi/mpi_log_sas.h. |
| 8058 |
**/ |
| 8059 |
static void |
| 8060 |
mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info, u8 cb_idx) |
| 8061 |
{ |
| 8062 |
union loginfo_type { |
| 8063 |
u32 loginfo; |
| 8064 |
struct { |
| 8065 |
u32 subcode:16; |
| 8066 |
u32 code:8; |
| 8067 |
u32 originator:4; |
| 8068 |
u32 bus_type:4; |
| 8069 |
} dw; |
| 8070 |
}; |
| 8071 |
union loginfo_type sas_loginfo; |
| 8072 |
char *originator_desc = NULL; |
| 8073 |
char *code_desc = NULL; |
| 8074 |
char *sub_code_desc = NULL; |
| 8075 |
|
| 8076 |
sas_loginfo.loginfo = log_info; |
| 8077 |
if ((sas_loginfo.dw.bus_type != 3 /*SAS*/) && |
| 8078 |
(sas_loginfo.dw.originator < ARRAY_SIZE(originator_str))) |
| 8079 |
return; |
| 8080 |
|
| 8081 |
originator_desc = originator_str[sas_loginfo.dw.originator]; |
| 8082 |
|
| 8083 |
switch (sas_loginfo.dw.originator) { |
| 8084 |
|
| 8085 |
case 0: /* IOP */ |
| 8086 |
if (sas_loginfo.dw.code < |
| 8087 |
ARRAY_SIZE(iop_code_str)) |
| 8088 |
code_desc = iop_code_str[sas_loginfo.dw.code]; |
| 8089 |
break; |
| 8090 |
case 1: /* PL */ |
| 8091 |
if (sas_loginfo.dw.code < |
| 8092 |
ARRAY_SIZE(pl_code_str)) |
| 8093 |
code_desc = pl_code_str[sas_loginfo.dw.code]; |
| 8094 |
break; |
| 8095 |
case 2: /* IR */ |
| 8096 |
if (sas_loginfo.dw.code >= |
| 8097 |
ARRAY_SIZE(ir_code_str)) |
| 8098 |
break; |
| 8099 |
code_desc = ir_code_str[sas_loginfo.dw.code]; |
| 8100 |
if (sas_loginfo.dw.subcode >= |
| 8101 |
ARRAY_SIZE(raid_sub_code_str)) |
| 8102 |
break; |
| 8103 |
if (sas_loginfo.dw.code == 0) |
| 8104 |
sub_code_desc = |
| 8105 |
raid_sub_code_str[sas_loginfo.dw.subcode]; |
| 8106 |
break; |
| 8107 |
default: |
| 8108 |
return; |
| 8109 |
} |
| 8110 |
|
| 8111 |
if (sub_code_desc != NULL) |
| 8112 |
printk(MYIOC_s_INFO_FMT |
| 8113 |
"LogInfo(0x%08x): Originator={%s}, Code={%s}," |
| 8114 |
" SubCode={%s} cb_idx %s\n", |
| 8115 |
ioc->name, log_info, originator_desc, code_desc, |
| 8116 |
sub_code_desc, MptCallbacksName[cb_idx]); |
| 8117 |
else if (code_desc != NULL) |
| 8118 |
printk(MYIOC_s_INFO_FMT |
| 8119 |
"LogInfo(0x%08x): Originator={%s}, Code={%s}," |
| 8120 |
" SubCode(0x%04x) cb_idx %s\n", |
| 8121 |
ioc->name, log_info, originator_desc, code_desc, |
| 8122 |
sas_loginfo.dw.subcode, MptCallbacksName[cb_idx]); |
| 8123 |
else |
| 8124 |
printk(MYIOC_s_INFO_FMT |
| 8125 |
"LogInfo(0x%08x): Originator={%s}, Code=(0x%02x)," |
| 8126 |
" SubCode(0x%04x) cb_idx %s\n", |
| 8127 |
ioc->name, log_info, originator_desc, |
| 8128 |
sas_loginfo.dw.code, sas_loginfo.dw.subcode, |
| 8129 |
MptCallbacksName[cb_idx]); |
| 8130 |
} |
| 8131 |
|
| 8132 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 8133 |
/** |
| 8134 |
* mpt_iocstatus_info_config - IOCSTATUS information for config pages |
| 8135 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 8136 |
* @ioc_status: U32 IOCStatus word from IOC |
| 8137 |
* @mf: Pointer to MPT request frame |
| 8138 |
* |
| 8139 |
* Refer to lsi/mpi.h. |
| 8140 |
**/ |
| 8141 |
static void |
| 8142 |
mpt_iocstatus_info_config(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf) |
| 8143 |
{ |
| 8144 |
Config_t *pReq = (Config_t *)mf; |
| 8145 |
char extend_desc[EVENT_DESCR_STR_SZ]; |
| 8146 |
char *desc = NULL; |
| 8147 |
u32 form; |
| 8148 |
u8 page_type; |
| 8149 |
|
| 8150 |
if (pReq->Header.PageType == MPI_CONFIG_PAGETYPE_EXTENDED) |
| 8151 |
page_type = pReq->ExtPageType; |
| 8152 |
else |
| 8153 |
page_type = pReq->Header.PageType; |
| 8154 |
|
| 8155 |
/* |
| 8156 |
* ignore invalid page messages for GET_NEXT_HANDLE |
| 8157 |
*/ |
| 8158 |
form = le32_to_cpu(pReq->PageAddress); |
| 8159 |
if (ioc_status == MPI_IOCSTATUS_CONFIG_INVALID_PAGE) { |
| 8160 |
if (page_type == MPI_CONFIG_EXTPAGETYPE_SAS_DEVICE || |
| 8161 |
page_type == MPI_CONFIG_EXTPAGETYPE_SAS_EXPANDER || |
| 8162 |
page_type == MPI_CONFIG_EXTPAGETYPE_ENCLOSURE) { |
| 8163 |
if ((form >> MPI_SAS_DEVICE_PGAD_FORM_SHIFT) == |
| 8164 |
MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE) |
| 8165 |
return; |
| 8166 |
} |
| 8167 |
if (page_type == MPI_CONFIG_PAGETYPE_FC_DEVICE) |
| 8168 |
if ((form & MPI_FC_DEVICE_PGAD_FORM_MASK) == |
| 8169 |
MPI_FC_DEVICE_PGAD_FORM_NEXT_DID) |
| 8170 |
return; |
| 8171 |
} |
| 8172 |
|
| 8173 |
snprintf(extend_desc, EVENT_DESCR_STR_SZ, |
| 8174 |
"type=%02Xh, page=%02Xh, action=%02Xh, form=%08Xh", |
| 8175 |
page_type, pReq->Header.PageNumber, pReq->Action, form); |
| 8176 |
|
| 8177 |
switch (ioc_status) { |
| 8178 |
|
| 8179 |
case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */ |
| 8180 |
desc = "Config Page Invalid Action"; |
| 8181 |
break; |
| 8182 |
|
| 8183 |
case MPI_IOCSTATUS_CONFIG_INVALID_TYPE: /* 0x0021 */ |
| 8184 |
desc = "Config Page Invalid Type"; |
| 8185 |
break; |
| 8186 |
|
| 8187 |
case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: /* 0x0022 */ |
| 8188 |
desc = "Config Page Invalid Page"; |
| 8189 |
break; |
| 8190 |
|
| 8191 |
case MPI_IOCSTATUS_CONFIG_INVALID_DATA: /* 0x0023 */ |
| 8192 |
desc = "Config Page Invalid Data"; |
| 8193 |
break; |
| 8194 |
|
| 8195 |
case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS: /* 0x0024 */ |
| 8196 |
desc = "Config Page No Defaults"; |
| 8197 |
break; |
| 8198 |
|
| 8199 |
case MPI_IOCSTATUS_CONFIG_CANT_COMMIT: /* 0x0025 */ |
| 8200 |
desc = "Config Page Can't Commit"; |
| 8201 |
break; |
| 8202 |
} |
| 8203 |
|
| 8204 |
if (!desc) |
| 8205 |
return; |
| 8206 |
|
| 8207 |
dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOCStatus(0x%04X): %s: %s\n", |
| 8208 |
ioc->name, ioc_status, desc, extend_desc)); |
| 8209 |
} |
| 8210 |
|
| 8211 |
/** |
| 8212 |
* mpt_iocstatus_info - IOCSTATUS information returned from IOC. |
| 8213 |
* @ioc: Pointer to MPT_ADAPTER structure |
| 8214 |
* @ioc_status: U32 IOCStatus word from IOC |
| 8215 |
* @mf: Pointer to MPT request frame |
| 8216 |
* |
| 8217 |
* Refer to lsi/mpi.h. |
| 8218 |
**/ |
| 8219 |
static void |
| 8220 |
mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf) |
| 8221 |
{ |
| 8222 |
u32 status = ioc_status & MPI_IOCSTATUS_MASK; |
| 8223 |
char *desc = NULL; |
| 8224 |
|
| 8225 |
switch (status) { |
| 8226 |
|
| 8227 |
/****************************************************************************/ |
| 8228 |
/* Common IOCStatus values for all replies */ |
| 8229 |
/****************************************************************************/ |
| 8230 |
|
| 8231 |
case MPI_IOCSTATUS_INVALID_FUNCTION: /* 0x0001 */ |
| 8232 |
desc = "Invalid Function"; |
| 8233 |
break; |
| 8234 |
|
| 8235 |
case MPI_IOCSTATUS_BUSY: /* 0x0002 */ |
| 8236 |
desc = "Busy"; |
| 8237 |
break; |
| 8238 |
|
| 8239 |
case MPI_IOCSTATUS_INVALID_SGL: /* 0x0003 */ |
| 8240 |
desc = "Invalid SGL"; |
| 8241 |
break; |
| 8242 |
|
| 8243 |
case MPI_IOCSTATUS_INTERNAL_ERROR: /* 0x0004 */ |
| 8244 |
desc = "Internal Error"; |
| 8245 |
break; |
| 8246 |
|
| 8247 |
case MPI_IOCSTATUS_RESERVED: /* 0x0005 */ |
| 8248 |
desc = "Reserved"; |
| 8249 |
break; |
| 8250 |
|
| 8251 |
case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES: /* 0x0006 */ |
| 8252 |
desc = "Insufficient Resources"; |
| 8253 |
break; |
| 8254 |
|
| 8255 |
case MPI_IOCSTATUS_INVALID_FIELD: /* 0x0007 */ |
| 8256 |
desc = "Invalid Field"; |
| 8257 |
break; |
| 8258 |
|
| 8259 |
case MPI_IOCSTATUS_INVALID_STATE: /* 0x0008 */ |
| 8260 |
desc = "Invalid State"; |
| 8261 |
break; |
| 8262 |
|
| 8263 |
/****************************************************************************/ |
| 8264 |
/* Config IOCStatus values */ |
| 8265 |
/****************************************************************************/ |
| 8266 |
|
| 8267 |
case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */ |
| 8268 |
case MPI_IOCSTATUS_CONFIG_INVALID_TYPE: /* 0x0021 */ |
| 8269 |
case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: /* 0x0022 */ |
| 8270 |
case MPI_IOCSTATUS_CONFIG_INVALID_DATA: /* 0x0023 */ |
| 8271 |
case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS: /* 0x0024 */ |
| 8272 |
case MPI_IOCSTATUS_CONFIG_CANT_COMMIT: /* 0x0025 */ |
| 8273 |
mpt_iocstatus_info_config(ioc, status, mf); |
| 8274 |
break; |
| 8275 |
|
| 8276 |
/****************************************************************************/ |
| 8277 |
/* SCSIIO Reply (SPI, FCP, SAS) initiator values */ |
| 8278 |
/* */ |
| 8279 |
/* Look at mptscsih_iocstatus_info_scsiio in mptscsih.c */ |
| 8280 |
/* */ |
| 8281 |
/****************************************************************************/ |
| 8282 |
|
| 8283 |
case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */ |
| 8284 |
case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */ |
| 8285 |
case MPI_IOCSTATUS_SCSI_INVALID_BUS: /* 0x0041 */ |
| 8286 |
case MPI_IOCSTATUS_SCSI_INVALID_TARGETID: /* 0x0042 */ |
| 8287 |
case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */ |
| 8288 |
case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */ |
| 8289 |
case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */ |
| 8290 |
case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */ |
| 8291 |
case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */ |
| 8292 |
case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* 0x0049 */ |
| 8293 |
case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: /* 0x004A */ |
| 8294 |
case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */ |
| 8295 |
case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */ |
| 8296 |
break; |
| 8297 |
|
| 8298 |
/****************************************************************************/ |
| 8299 |
/* SCSI Target values */ |
| 8300 |
/****************************************************************************/ |
| 8301 |
|
| 8302 |
case MPI_IOCSTATUS_TARGET_PRIORITY_IO: /* 0x0060 */ |
| 8303 |
desc = "Target: Priority IO"; |
| 8304 |
break; |
| 8305 |
|
| 8306 |
case MPI_IOCSTATUS_TARGET_INVALID_PORT: /* 0x0061 */ |
| 8307 |
desc = "Target: Invalid Port"; |
| 8308 |
break; |
| 8309 |
|
| 8310 |
case MPI_IOCSTATUS_TARGET_INVALID_IO_INDEX: /* 0x0062 */ |
| 8311 |
desc = "Target Invalid IO Index:"; |
| 8312 |
break; |
| 8313 |
|
| 8314 |
case MPI_IOCSTATUS_TARGET_ABORTED: /* 0x0063 */ |
| 8315 |
desc = "Target: Aborted"; |
| 8316 |
break; |
| 8317 |
|
| 8318 |
case MPI_IOCSTATUS_TARGET_NO_CONN_RETRYABLE: /* 0x0064 */ |
| 8319 |
desc = "Target: No Conn Retryable"; |
| 8320 |
break; |
| 8321 |
|
| 8322 |
case MPI_IOCSTATUS_TARGET_NO_CONNECTION: /* 0x0065 */ |
| 8323 |
desc = "Target: No Connection"; |
| 8324 |
break; |
| 8325 |
|
| 8326 |
case MPI_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH: /* 0x006A */ |
| 8327 |
desc = "Target: Transfer Count Mismatch"; |
| 8328 |
break; |
| 8329 |
|
| 8330 |
case MPI_IOCSTATUS_TARGET_STS_DATA_NOT_SENT: /* 0x006B */ |
| 8331 |
desc = "Target: STS Data not Sent"; |
| 8332 |
break; |
| 8333 |
|
| 8334 |
case MPI_IOCSTATUS_TARGET_DATA_OFFSET_ERROR: /* 0x006D */ |
| 8335 |
desc = "Target: Data Offset Error"; |
| 8336 |
break; |
| 8337 |
|
| 8338 |
case MPI_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA: /* 0x006E */ |
| 8339 |
desc = "Target: Too Much Write Data"; |
| 8340 |
break; |
| 8341 |
|
| 8342 |
case MPI_IOCSTATUS_TARGET_IU_TOO_SHORT: /* 0x006F */ |
| 8343 |
desc = "Target: IU Too Short"; |
| 8344 |
break; |
| 8345 |
|
| 8346 |
case MPI_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT: /* 0x0070 */ |
| 8347 |
desc = "Target: ACK NAK Timeout"; |
| 8348 |
break; |
| 8349 |
|
| 8350 |
case MPI_IOCSTATUS_TARGET_NAK_RECEIVED: /* 0x0071 */ |
| 8351 |
desc = "Target: Nak Received"; |
| 8352 |
break; |
| 8353 |
|
| 8354 |
/****************************************************************************/ |
| 8355 |
/* Fibre Channel Direct Access values */ |
| 8356 |
/****************************************************************************/ |
| 8357 |
|
| 8358 |
case MPI_IOCSTATUS_FC_ABORTED: /* 0x0066 */ |
| 8359 |
desc = "FC: Aborted"; |
| 8360 |
break; |
| 8361 |
|
| 8362 |
case MPI_IOCSTATUS_FC_RX_ID_INVALID: /* 0x0067 */ |
| 8363 |
desc = "FC: RX ID Invalid"; |
| 8364 |
break; |
| 8365 |
|
| 8366 |
case MPI_IOCSTATUS_FC_DID_INVALID: /* 0x0068 */ |
| 8367 |
desc = "FC: DID Invalid"; |
| 8368 |
break; |
| 8369 |
|
| 8370 |
case MPI_IOCSTATUS_FC_NODE_LOGGED_OUT: /* 0x0069 */ |
| 8371 |
desc = "FC: Node Logged Out"; |
| 8372 |
break; |
| 8373 |
|
| 8374 |
case MPI_IOCSTATUS_FC_EXCHANGE_CANCELED: /* 0x006C */ |
| 8375 |
desc = "FC: Exchange Canceled"; |
| 8376 |
break; |
| 8377 |
|
| 8378 |
/****************************************************************************/ |
| 8379 |
/* LAN values */ |
| 8380 |
/****************************************************************************/ |
| 8381 |
|
| 8382 |
case MPI_IOCSTATUS_LAN_DEVICE_NOT_FOUND: /* 0x0080 */ |
| 8383 |
desc = "LAN: Device not Found"; |
| 8384 |
break; |
| 8385 |
|
| 8386 |
case MPI_IOCSTATUS_LAN_DEVICE_FAILURE: /* 0x0081 */ |
| 8387 |
desc = "LAN: Device Failure"; |
| 8388 |
break; |
| 8389 |
|
| 8390 |
case MPI_IOCSTATUS_LAN_TRANSMIT_ERROR: /* 0x0082 */ |
| 8391 |
desc = "LAN: Transmit Error"; |
| 8392 |
break; |
| 8393 |
|
| 8394 |
case MPI_IOCSTATUS_LAN_TRANSMIT_ABORTED: /* 0x0083 */ |
| 8395 |
desc = "LAN: Transmit Aborted"; |
| 8396 |
break; |
| 8397 |
|
| 8398 |
case MPI_IOCSTATUS_LAN_RECEIVE_ERROR: /* 0x0084 */ |
| 8399 |
desc = "LAN: Receive Error"; |
| 8400 |
break; |
| 8401 |
|
| 8402 |
case MPI_IOCSTATUS_LAN_RECEIVE_ABORTED: /* 0x0085 */ |
| 8403 |
desc = "LAN: Receive Aborted"; |
| 8404 |
break; |
| 8405 |
|
| 8406 |
case MPI_IOCSTATUS_LAN_PARTIAL_PACKET: /* 0x0086 */ |
| 8407 |
desc = "LAN: Partial Packet"; |
| 8408 |
break; |
| 8409 |
|
| 8410 |
case MPI_IOCSTATUS_LAN_CANCELED: /* 0x0087 */ |
| 8411 |
desc = "LAN: Canceled"; |
| 8412 |
break; |
| 8413 |
|
| 8414 |
/****************************************************************************/ |
| 8415 |
/* Serial Attached SCSI values */ |
| 8416 |
/****************************************************************************/ |
| 8417 |
|
| 8418 |
case MPI_IOCSTATUS_SAS_SMP_REQUEST_FAILED: /* 0x0090 */ |
| 8419 |
desc = "SAS: SMP Request Failed"; |
| 8420 |
break; |
| 8421 |
|
| 8422 |
case MPI_IOCSTATUS_SAS_SMP_DATA_OVERRUN: /* 0x0090 */ |
| 8423 |
desc = "SAS: SMP Data Overrun"; |
| 8424 |
break; |
| 8425 |
|
| 8426 |
default: |
| 8427 |
desc = "Others"; |
| 8428 |
break; |
| 8429 |
} |
| 8430 |
|
| 8431 |
if (!desc) |
| 8432 |
return; |
| 8433 |
|
| 8434 |
dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOCStatus(0x%04X): %s\n", |
| 8435 |
ioc->name, status, desc)); |
| 8436 |
} |
| 8437 |
|
| 8438 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 8439 |
EXPORT_SYMBOL(mpt_attach); |
| 8440 |
EXPORT_SYMBOL(mpt_detach); |
| 8441 |
#ifdef CONFIG_PM |
| 8442 |
EXPORT_SYMBOL(mpt_resume); |
| 8443 |
EXPORT_SYMBOL(mpt_suspend); |
| 8444 |
#endif |
| 8445 |
EXPORT_SYMBOL(ioc_list); |
| 8446 |
EXPORT_SYMBOL(mpt_register); |
| 8447 |
EXPORT_SYMBOL(mpt_deregister); |
| 8448 |
EXPORT_SYMBOL(mpt_event_register); |
| 8449 |
EXPORT_SYMBOL(mpt_event_deregister); |
| 8450 |
EXPORT_SYMBOL(mpt_reset_register); |
| 8451 |
EXPORT_SYMBOL(mpt_reset_deregister); |
| 8452 |
EXPORT_SYMBOL(mpt_device_driver_register); |
| 8453 |
EXPORT_SYMBOL(mpt_device_driver_deregister); |
| 8454 |
EXPORT_SYMBOL(mpt_get_msg_frame); |
| 8455 |
EXPORT_SYMBOL(mpt_put_msg_frame); |
| 8456 |
EXPORT_SYMBOL(mpt_put_msg_frame_hi_pri); |
| 8457 |
EXPORT_SYMBOL(mpt_free_msg_frame); |
| 8458 |
EXPORT_SYMBOL(mpt_send_handshake_request); |
| 8459 |
EXPORT_SYMBOL(mpt_verify_adapter); |
| 8460 |
EXPORT_SYMBOL(mpt_GetIocState); |
| 8461 |
EXPORT_SYMBOL(mpt_print_ioc_summary); |
| 8462 |
EXPORT_SYMBOL(mpt_HardResetHandler); |
| 8463 |
EXPORT_SYMBOL(mpt_config); |
| 8464 |
EXPORT_SYMBOL(mpt_findImVolumes); |
| 8465 |
EXPORT_SYMBOL(mpt_alloc_fw_memory); |
| 8466 |
EXPORT_SYMBOL(mpt_free_fw_memory); |
| 8467 |
EXPORT_SYMBOL(mptbase_sas_persist_operation); |
| 8468 |
EXPORT_SYMBOL(mpt_raid_phys_disk_pg0); |
| 8469 |
|
| 8470 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 8471 |
/** |
| 8472 |
* fusion_init - Fusion MPT base driver initialization routine. |
| 8473 |
* |
| 8474 |
* Returns 0 for success, non-zero for failure. |
| 8475 |
*/ |
| 8476 |
static int __init |
| 8477 |
fusion_init(void) |
| 8478 |
{ |
| 8479 |
u8 cb_idx; |
| 8480 |
|
| 8481 |
show_mptmod_ver(my_NAME, my_VERSION); |
| 8482 |
printk(KERN_INFO COPYRIGHT "\n"); |
| 8483 |
|
| 8484 |
for (cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) { |
| 8485 |
MptCallbacks[cb_idx] = NULL; |
| 8486 |
MptDriverClass[cb_idx] = MPTUNKNOWN_DRIVER; |
| 8487 |
MptEvHandlers[cb_idx] = NULL; |
| 8488 |
MptResetHandlers[cb_idx] = NULL; |
| 8489 |
} |
| 8490 |
|
| 8491 |
/* Register ourselves (mptbase) in order to facilitate |
| 8492 |
* EventNotification handling. |
| 8493 |
*/ |
| 8494 |
mpt_base_index = mpt_register(mptbase_reply, MPTBASE_DRIVER, |
| 8495 |
"mptbase_reply"); |
| 8496 |
|
| 8497 |
/* Register for hard reset handling callbacks. |
| 8498 |
*/ |
| 8499 |
mpt_reset_register(mpt_base_index, mpt_ioc_reset); |
| 8500 |
|
| 8501 |
#ifdef CONFIG_PROC_FS |
| 8502 |
(void) procmpt_create(); |
| 8503 |
#endif |
| 8504 |
return 0; |
| 8505 |
} |
| 8506 |
|
| 8507 |
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| 8508 |
/** |
| 8509 |
* fusion_exit - Perform driver unload cleanup. |
| 8510 |
* |
| 8511 |
* This routine frees all resources associated with each MPT adapter |
| 8512 |
* and removes all %MPT_PROCFS_MPTBASEDIR entries. |
| 8513 |
*/ |
| 8514 |
static void __exit |
| 8515 |
fusion_exit(void) |
| 8516 |
{ |
| 8517 |
|
| 8518 |
mpt_reset_deregister(mpt_base_index); |
| 8519 |
|
| 8520 |
#ifdef CONFIG_PROC_FS |
| 8521 |
procmpt_destroy(); |
| 8522 |
#endif |
| 8523 |
} |
| 8524 |
|
| 8525 |
module_init(fusion_init); |
| 8526 |
module_exit(fusion_exit); |