| 1 |
/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ |
| 2 |
/* |
| 3 |
* Copyright (C) 2012-2014, 2018-2025 Intel Corporation |
| 4 |
* Copyright (C) 2013-2014 Intel Mobile Communications GmbH |
| 5 |
* Copyright (C) 2015-2017 Intel Deutschland GmbH |
| 6 |
*/ |
| 7 |
#ifndef __iwl_fw_api_power_h__ |
| 8 |
#define __iwl_fw_api_power_h__ |
| 9 |
|
| 10 |
#include "nvm-reg.h" |
| 11 |
|
| 12 |
/* Power Management Commands, Responses, Notifications */ |
| 13 |
|
| 14 |
/** |
| 15 |
* enum iwl_ltr_config_flags - masks for LTR config command flags |
| 16 |
* @LTR_CFG_FLAG_FEATURE_ENABLE: Feature operational status |
| 17 |
* @LTR_CFG_FLAG_HW_DIS_ON_SHADOW_REG_ACCESS: allow LTR change on shadow |
| 18 |
* memory access |
| 19 |
* @LTR_CFG_FLAG_HW_EN_SHRT_WR_THROUGH: allow LTR msg send on ANY LTR |
| 20 |
* reg change |
| 21 |
* @LTR_CFG_FLAG_HW_DIS_ON_D0_2_D3: allow LTR msg send on transition from |
| 22 |
* D0 to D3 |
| 23 |
* @LTR_CFG_FLAG_SW_SET_SHORT: fixed static short LTR register |
| 24 |
* @LTR_CFG_FLAG_SW_SET_LONG: fixed static short LONG register |
| 25 |
* @LTR_CFG_FLAG_DENIE_C10_ON_PD: allow going into C10 on PD |
| 26 |
* @LTR_CFG_FLAG_UPDATE_VALUES: update config values and short |
| 27 |
* idle timeout |
| 28 |
*/ |
| 29 |
enum iwl_ltr_config_flags { |
| 30 |
LTR_CFG_FLAG_FEATURE_ENABLE = BIT(0), |
| 31 |
LTR_CFG_FLAG_HW_DIS_ON_SHADOW_REG_ACCESS = BIT(1), |
| 32 |
LTR_CFG_FLAG_HW_EN_SHRT_WR_THROUGH = BIT(2), |
| 33 |
LTR_CFG_FLAG_HW_DIS_ON_D0_2_D3 = BIT(3), |
| 34 |
LTR_CFG_FLAG_SW_SET_SHORT = BIT(4), |
| 35 |
LTR_CFG_FLAG_SW_SET_LONG = BIT(5), |
| 36 |
LTR_CFG_FLAG_DENIE_C10_ON_PD = BIT(6), |
| 37 |
LTR_CFG_FLAG_UPDATE_VALUES = BIT(7), |
| 38 |
}; |
| 39 |
|
| 40 |
/** |
| 41 |
* struct iwl_ltr_config_cmd_v1 - configures the LTR |
| 42 |
* @flags: See &enum iwl_ltr_config_flags |
| 43 |
* @static_long: static LTR Long register value. |
| 44 |
* @static_short: static LTR Short register value. |
| 45 |
*/ |
| 46 |
struct iwl_ltr_config_cmd_v1 { |
| 47 |
__le32 flags; |
| 48 |
__le32 static_long; |
| 49 |
__le32 static_short; |
| 50 |
} __packed; /* LTR_CAPABLE_API_S_VER_1 */ |
| 51 |
|
| 52 |
#define LTR_VALID_STATES_NUM 4 |
| 53 |
|
| 54 |
/** |
| 55 |
* struct iwl_ltr_config_cmd - configures the LTR |
| 56 |
* @flags: See &enum iwl_ltr_config_flags |
| 57 |
* @static_long: static LTR Long register value. |
| 58 |
* @static_short: static LTR Short register value. |
| 59 |
* @ltr_cfg_values: LTR parameters table values (in usec) in following order: |
| 60 |
* TX, RX, Short Idle, Long Idle. Used only if %LTR_CFG_FLAG_UPDATE_VALUES |
| 61 |
* is set. |
| 62 |
* @ltr_short_idle_timeout: LTR Short Idle timeout (in usec). Used only if |
| 63 |
* %LTR_CFG_FLAG_UPDATE_VALUES is set. |
| 64 |
*/ |
| 65 |
struct iwl_ltr_config_cmd { |
| 66 |
__le32 flags; |
| 67 |
__le32 static_long; |
| 68 |
__le32 static_short; |
| 69 |
__le32 ltr_cfg_values[LTR_VALID_STATES_NUM]; |
| 70 |
__le32 ltr_short_idle_timeout; |
| 71 |
} __packed; /* LTR_CAPABLE_API_S_VER_2 */ |
| 72 |
|
| 73 |
/* Radio LP RX Energy Threshold measured in dBm */ |
| 74 |
#define POWER_LPRX_RSSI_THRESHOLD 75 |
| 75 |
#define POWER_LPRX_RSSI_THRESHOLD_MAX 94 |
| 76 |
#define POWER_LPRX_RSSI_THRESHOLD_MIN 30 |
| 77 |
|
| 78 |
/** |
| 79 |
* enum iwl_power_flags - masks for power table command flags |
| 80 |
* @POWER_FLAGS_POWER_SAVE_ENA_MSK: '1' Allow to save power by turning off |
| 81 |
* receiver and transmitter. '0' - does not allow. |
| 82 |
* @POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK: '0' Driver disables power management, |
| 83 |
* '1' Driver enables PM (use rest of parameters) |
| 84 |
* @POWER_FLAGS_SKIP_OVER_DTIM_MSK: '0' PM have to walk up every DTIM, |
| 85 |
* '1' PM could sleep over DTIM till listen Interval. |
| 86 |
* @POWER_FLAGS_SNOOZE_ENA_MSK: Enable snoozing only if uAPSD is enabled and all |
| 87 |
* access categories are both delivery and trigger enabled. |
| 88 |
* @POWER_FLAGS_BT_SCO_ENA: Enable BT SCO coex only if uAPSD and |
| 89 |
* PBW Snoozing enabled |
| 90 |
* @POWER_FLAGS_ADVANCE_PM_ENA_MSK: Advanced PM (uAPSD) enable mask |
| 91 |
* @POWER_FLAGS_LPRX_ENA_MSK: Low Power RX enable. |
| 92 |
* @POWER_FLAGS_UAPSD_MISBEHAVING_ENA_MSK: AP/GO's uAPSD misbehaving |
| 93 |
* detection enablement |
| 94 |
* @POWER_FLAGS_ENABLE_SMPS_MSK: SMPS is allowed for this vif |
| 95 |
*/ |
| 96 |
enum iwl_power_flags { |
| 97 |
POWER_FLAGS_POWER_SAVE_ENA_MSK = BIT(0), |
| 98 |
POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK = BIT(1), |
| 99 |
POWER_FLAGS_SKIP_OVER_DTIM_MSK = BIT(2), |
| 100 |
POWER_FLAGS_SNOOZE_ENA_MSK = BIT(5), |
| 101 |
POWER_FLAGS_BT_SCO_ENA = BIT(8), |
| 102 |
POWER_FLAGS_ADVANCE_PM_ENA_MSK = BIT(9), |
| 103 |
POWER_FLAGS_LPRX_ENA_MSK = BIT(11), |
| 104 |
POWER_FLAGS_UAPSD_MISBEHAVING_ENA_MSK = BIT(12), |
| 105 |
POWER_FLAGS_ENABLE_SMPS_MSK = BIT(14), |
| 106 |
}; |
| 107 |
|
| 108 |
#define IWL_POWER_VEC_SIZE 5 |
| 109 |
|
| 110 |
/** |
| 111 |
* struct iwl_powertable_cmd - legacy power command. Beside old API support this |
| 112 |
* is used also with a new power API for device wide power settings. |
| 113 |
* POWER_TABLE_CMD = 0x77 (command, has simple generic response) |
| 114 |
* |
| 115 |
* @flags: Power table command flags from POWER_FLAGS_* |
| 116 |
* @keep_alive_seconds: Keep alive period in seconds. Default - 25 sec. |
| 117 |
* Minimum allowed:- 3 * DTIM. Keep alive period must be |
| 118 |
* set regardless of power scheme or current power state. |
| 119 |
* FW use this value also when PM is disabled. |
| 120 |
* @debug_flags: debug flags |
| 121 |
* @rx_data_timeout: Minimum time (usec) from last Rx packet for AM to |
| 122 |
* PSM transition - legacy PM |
| 123 |
* @tx_data_timeout: Minimum time (usec) from last Tx packet for AM to |
| 124 |
* PSM transition - legacy PM |
| 125 |
* @sleep_interval: not in use |
| 126 |
* @skip_dtim_periods: Number of DTIM periods to skip if Skip over DTIM flag |
| 127 |
* is set. For example, if it is required to skip over |
| 128 |
* one DTIM, this value need to be set to 2 (DTIM periods). |
| 129 |
* @lprx_rssi_threshold: Signal strength up to which LP RX can be enabled. |
| 130 |
* Default: 80dbm |
| 131 |
*/ |
| 132 |
struct iwl_powertable_cmd { |
| 133 |
/* PM_POWER_TABLE_CMD_API_S_VER_6 */ |
| 134 |
__le16 flags; |
| 135 |
u8 keep_alive_seconds; |
| 136 |
u8 debug_flags; |
| 137 |
__le32 rx_data_timeout; |
| 138 |
__le32 tx_data_timeout; |
| 139 |
__le32 sleep_interval[IWL_POWER_VEC_SIZE]; |
| 140 |
__le32 skip_dtim_periods; |
| 141 |
__le32 lprx_rssi_threshold; |
| 142 |
} __packed; |
| 143 |
|
| 144 |
/** |
| 145 |
* enum iwl_device_power_flags - masks for device power command flags |
| 146 |
* @DEVICE_POWER_FLAGS_POWER_SAVE_ENA_MSK: |
| 147 |
* '1' Allow to save power by turning off |
| 148 |
* receiver and transmitter. '0' - does not allow. |
| 149 |
* @DEVICE_POWER_FLAGS_ALLOW_MEM_RETENTION_MSK: |
| 150 |
* Device Retention indication, '1' indicate retention is enabled. |
| 151 |
* @DEVICE_POWER_FLAGS_NO_SLEEP_TILL_D3_MSK: |
| 152 |
* Prevent power save until entering d3 is completed. |
| 153 |
* @DEVICE_POWER_FLAGS_32K_CLK_VALID_MSK: |
| 154 |
* 32Khz external slow clock valid indication, '1' indicate cloack is |
| 155 |
* valid. |
| 156 |
*/ |
| 157 |
enum iwl_device_power_flags { |
| 158 |
DEVICE_POWER_FLAGS_POWER_SAVE_ENA_MSK = BIT(0), |
| 159 |
DEVICE_POWER_FLAGS_ALLOW_MEM_RETENTION_MSK = BIT(1), |
| 160 |
DEVICE_POWER_FLAGS_NO_SLEEP_TILL_D3_MSK = BIT(7), |
| 161 |
DEVICE_POWER_FLAGS_32K_CLK_VALID_MSK = BIT(12), |
| 162 |
}; |
| 163 |
|
| 164 |
/** |
| 165 |
* struct iwl_device_power_cmd - device wide power command. |
| 166 |
* DEVICE_POWER_CMD = 0x77 (command, has simple generic response) |
| 167 |
* |
| 168 |
* @flags: Power table command flags from &enum iwl_device_power_flags |
| 169 |
* @reserved: reserved (padding) |
| 170 |
*/ |
| 171 |
struct iwl_device_power_cmd { |
| 172 |
/* PM_POWER_TABLE_CMD_API_S_VER_7 */ |
| 173 |
__le16 flags; |
| 174 |
__le16 reserved; |
| 175 |
} __packed; |
| 176 |
|
| 177 |
/** |
| 178 |
* struct iwl_mac_power_cmd - New power command containing uAPSD support |
| 179 |
* MAC_PM_POWER_TABLE = 0xA9 (command, has simple generic response) |
| 180 |
* @id_and_color: MAC contex identifier, &enum iwl_ctxt_id_and_color |
| 181 |
* @flags: Power table command flags from POWER_FLAGS_* |
| 182 |
* @keep_alive_seconds: Keep alive period in seconds. Default - 25 sec. |
| 183 |
* Minimum allowed:- 3 * DTIM. Keep alive period must be |
| 184 |
* set regardless of power scheme or current power state. |
| 185 |
* FW use this value also when PM is disabled. |
| 186 |
* @rx_data_timeout: Minimum time (usec) from last Rx packet for AM to |
| 187 |
* PSM transition - legacy PM |
| 188 |
* @tx_data_timeout: Minimum time (usec) from last Tx packet for AM to |
| 189 |
* PSM transition - legacy PM |
| 190 |
* @skip_dtim_periods: Number of DTIM periods to skip if Skip over DTIM flag |
| 191 |
* is set. For example, if it is required to skip over |
| 192 |
* one DTIM, this value need to be set to 2 (DTIM periods). |
| 193 |
* @rx_data_timeout_uapsd: Minimum time (usec) from last Rx packet for AM to |
| 194 |
* PSM transition - uAPSD |
| 195 |
* @tx_data_timeout_uapsd: Minimum time (usec) from last Tx packet for AM to |
| 196 |
* PSM transition - uAPSD |
| 197 |
* @lprx_rssi_threshold: Signal strength up to which LP RX can be enabled. |
| 198 |
* Default: 80dbm |
| 199 |
* @snooze_interval: Maximum time between attempts to retrieve buffered data |
| 200 |
* from the AP [msec] |
| 201 |
* @snooze_window: A window of time in which PBW snoozing insures that all |
| 202 |
* packets received. It is also the minimum time from last |
| 203 |
* received unicast RX packet, before client stops snoozing |
| 204 |
* for data. [msec] |
| 205 |
* @snooze_step: TBD |
| 206 |
* @qndp_tid: TID client shall use for uAPSD QNDP triggers |
| 207 |
* @uapsd_ac_flags: Set trigger-enabled and delivery-enabled indication for |
| 208 |
* each corresponding AC. |
| 209 |
* Use IEEE80211_WMM_IE_STA_QOSINFO_AC* for correct values. |
| 210 |
* @uapsd_max_sp: Use IEEE80211_WMM_IE_STA_QOSINFO_SP_* for correct |
| 211 |
* values. |
| 212 |
* @heavy_tx_thld_packets: TX threshold measured in number of packets |
| 213 |
* @heavy_rx_thld_packets: RX threshold measured in number of packets |
| 214 |
* @heavy_tx_thld_percentage: TX threshold measured in load's percentage |
| 215 |
* @heavy_rx_thld_percentage: RX threshold measured in load's percentage |
| 216 |
* @limited_ps_threshold: (unused) |
| 217 |
* @reserved: reserved (padding) |
| 218 |
*/ |
| 219 |
struct iwl_mac_power_cmd { |
| 220 |
/* CONTEXT_DESC_API_T_VER_1 */ |
| 221 |
__le32 id_and_color; |
| 222 |
|
| 223 |
__le16 flags; |
| 224 |
__le16 keep_alive_seconds; |
| 225 |
__le32 rx_data_timeout; |
| 226 |
__le32 tx_data_timeout; |
| 227 |
__le32 rx_data_timeout_uapsd; |
| 228 |
__le32 tx_data_timeout_uapsd; |
| 229 |
u8 lprx_rssi_threshold; |
| 230 |
u8 skip_dtim_periods; |
| 231 |
__le16 snooze_interval; |
| 232 |
__le16 snooze_window; |
| 233 |
u8 snooze_step; |
| 234 |
u8 qndp_tid; |
| 235 |
u8 uapsd_ac_flags; |
| 236 |
u8 uapsd_max_sp; |
| 237 |
u8 heavy_tx_thld_packets; |
| 238 |
u8 heavy_rx_thld_packets; |
| 239 |
u8 heavy_tx_thld_percentage; |
| 240 |
u8 heavy_rx_thld_percentage; |
| 241 |
u8 limited_ps_threshold; |
| 242 |
u8 reserved; |
| 243 |
} __packed; /* CLIENT_PM_POWER_TABLE_S_VER_1, VER_2 */ |
| 244 |
|
| 245 |
/* |
| 246 |
* struct iwl_uapsd_misbehaving_ap_notif - FW sends this notification when |
| 247 |
* associated AP is identified as improperly implementing uAPSD protocol. |
| 248 |
* PSM_UAPSD_AP_MISBEHAVING_NOTIFICATION = 0x78 |
| 249 |
* @sta_id: index of station in uCode's station table - associated AP ID in |
| 250 |
* this context. |
| 251 |
*/ |
| 252 |
struct iwl_uapsd_misbehaving_ap_notif { |
| 253 |
__le32 sta_id; |
| 254 |
u8 mac_id; |
| 255 |
u8 reserved[3]; |
| 256 |
} __packed; |
| 257 |
|
| 258 |
enum iwl_dev_tx_power_cmd_mode { |
| 259 |
IWL_TX_POWER_MODE_SET_LINK = 0, |
| 260 |
IWL_TX_POWER_MODE_SET_DEVICE = 1, |
| 261 |
IWL_TX_POWER_MODE_SET_CHAINS = 2, |
| 262 |
IWL_TX_POWER_MODE_SET_ACK = 3, |
| 263 |
IWL_TX_POWER_MODE_SET_SAR_TIMER = 4, |
| 264 |
IWL_TX_POWER_MODE_SET_SAR_TIMER_DEFAULT_TABLE = 5, |
| 265 |
}; /* TX_POWER_REDUCED_FLAGS_TYPE_API_E_VER_5 */; |
| 266 |
|
| 267 |
#define IWL_NUM_CHAIN_TABLES 1 |
| 268 |
#define IWL_NUM_CHAIN_TABLES_V2 2 |
| 269 |
#define IWL_NUM_CHAIN_LIMITS 2 |
| 270 |
#define IWL_NUM_SUB_BANDS_V1 5 |
| 271 |
#define IWL_NUM_SUB_BANDS_V2 11 |
| 272 |
|
| 273 |
/** |
| 274 |
* struct iwl_dev_tx_power_common - Common part of the TX power reduction cmd |
| 275 |
* @set_mode: see &enum iwl_dev_tx_power_cmd_mode |
| 276 |
* @link_id: id of the link ctx for which we are reducing TX power. |
| 277 |
* For version 9 / 10, this is the link id. For earlier versions, it is |
| 278 |
* the mac id. |
| 279 |
* @pwr_restriction: TX power restriction in 1/8 dBms. |
| 280 |
*/ |
| 281 |
struct iwl_dev_tx_power_common { |
| 282 |
__le32 set_mode; |
| 283 |
__le32 link_id; |
| 284 |
__le16 pwr_restriction; |
| 285 |
} __packed; |
| 286 |
|
| 287 |
/** |
| 288 |
* struct iwl_dev_tx_power_cmd_v3 - TX power reduction command version 3 |
| 289 |
* @per_chain: per chain restrictions |
| 290 |
*/ |
| 291 |
struct iwl_dev_tx_power_cmd_v3 { |
| 292 |
__le16 per_chain[IWL_NUM_CHAIN_TABLES][IWL_NUM_CHAIN_LIMITS][IWL_NUM_SUB_BANDS_V1]; |
| 293 |
} __packed; /* TX_REDUCED_POWER_API_S_VER_3 */ |
| 294 |
|
| 295 |
#define IWL_DEV_MAX_TX_POWER 0x7FFF |
| 296 |
|
| 297 |
/** |
| 298 |
* struct iwl_dev_tx_power_cmd_v4 - TX power reduction command version 4 |
| 299 |
* @per_chain: per chain restrictions |
| 300 |
* @enable_ack_reduction: enable or disable close range ack TX power |
| 301 |
* reduction. |
| 302 |
* @reserved: reserved (padding) |
| 303 |
*/ |
| 304 |
struct iwl_dev_tx_power_cmd_v4 { |
| 305 |
__le16 per_chain[IWL_NUM_CHAIN_TABLES][IWL_NUM_CHAIN_LIMITS][IWL_NUM_SUB_BANDS_V1]; |
| 306 |
u8 enable_ack_reduction; |
| 307 |
u8 reserved[3]; |
| 308 |
} __packed; /* TX_REDUCED_POWER_API_S_VER_4 */ |
| 309 |
|
| 310 |
/** |
| 311 |
* struct iwl_dev_tx_power_cmd_v5 - TX power reduction command version 5 |
| 312 |
* @per_chain: per chain restrictions |
| 313 |
* @enable_ack_reduction: enable or disable close range ack TX power |
| 314 |
* reduction. |
| 315 |
* @per_chain_restriction_changed: is per_chain_restriction has changed |
| 316 |
* from last command. used if set_mode is |
| 317 |
* IWL_TX_POWER_MODE_SET_SAR_TIMER. |
| 318 |
* note: if not changed, the command is used for keep alive only. |
| 319 |
* @reserved: reserved (padding) |
| 320 |
* @timer_period: timer in milliseconds. if expires FW will change to default |
| 321 |
* BIOS values. relevant if setMode is IWL_TX_POWER_MODE_SET_SAR_TIMER |
| 322 |
*/ |
| 323 |
struct iwl_dev_tx_power_cmd_v5 { |
| 324 |
__le16 per_chain[IWL_NUM_CHAIN_TABLES][IWL_NUM_CHAIN_LIMITS][IWL_NUM_SUB_BANDS_V1]; |
| 325 |
u8 enable_ack_reduction; |
| 326 |
u8 per_chain_restriction_changed; |
| 327 |
u8 reserved[2]; |
| 328 |
__le32 timer_period; |
| 329 |
} __packed; /* TX_REDUCED_POWER_API_S_VER_5 */ |
| 330 |
|
| 331 |
/** |
| 332 |
* struct iwl_dev_tx_power_cmd_v8 - TX power reduction command version 8 |
| 333 |
* @per_chain: per chain restrictions |
| 334 |
* @enable_ack_reduction: enable or disable close range ack TX power |
| 335 |
* reduction. |
| 336 |
* @per_chain_restriction_changed: is per_chain_restriction has changed |
| 337 |
* from last command. used if set_mode is |
| 338 |
* IWL_TX_POWER_MODE_SET_SAR_TIMER. |
| 339 |
* note: if not changed, the command is used for keep alive only. |
| 340 |
* @reserved: reserved (padding) |
| 341 |
* @timer_period: timer in milliseconds. if expires FW will change to default |
| 342 |
* BIOS values. relevant if setMode is IWL_TX_POWER_MODE_SET_SAR_TIMER |
| 343 |
* @flags: reduce power flags. |
| 344 |
* @tpc_vlp_backoff_level: user backoff of UNII5,7 VLP channels in USA. |
| 345 |
* Not in use. |
| 346 |
*/ |
| 347 |
struct iwl_dev_tx_power_cmd_v8 { |
| 348 |
__le16 per_chain[IWL_NUM_CHAIN_TABLES_V2][IWL_NUM_CHAIN_LIMITS][IWL_NUM_SUB_BANDS_V2]; |
| 349 |
u8 enable_ack_reduction; |
| 350 |
u8 per_chain_restriction_changed; |
| 351 |
u8 reserved[2]; |
| 352 |
__le32 timer_period; |
| 353 |
__le32 flags; |
| 354 |
__le32 tpc_vlp_backoff_level; |
| 355 |
} __packed; /* TX_REDUCED_POWER_API_S_VER_8 */ |
| 356 |
|
| 357 |
/* |
| 358 |
* @dev_24: device TX power restriction in 1/8 dBms |
| 359 |
* @dev_52_low: device TX power restriction upper band - low |
| 360 |
* @dev_52_high: device TX power restriction upper band - high |
| 361 |
*/ |
| 362 |
struct iwl_dev_tx_power_cmd_per_band { |
| 363 |
__le16 dev_24; |
| 364 |
__le16 dev_52_low; |
| 365 |
__le16 dev_52_high; |
| 366 |
} __packed; |
| 367 |
|
| 368 |
/** |
| 369 |
* struct iwl_dev_tx_power_cmd_v3_v8 - TX power reduction command (multiversion) |
| 370 |
* @per_band: per band restrictions |
| 371 |
* @common: common part of the command |
| 372 |
* @v3: version 3 part of the command |
| 373 |
* @v4: version 4 part of the command |
| 374 |
* @v5: version 5 part of the command |
| 375 |
* @v8: version 8 part of the command |
| 376 |
*/ |
| 377 |
struct iwl_dev_tx_power_cmd_v3_v8 { |
| 378 |
struct iwl_dev_tx_power_common common; |
| 379 |
struct iwl_dev_tx_power_cmd_per_band per_band; |
| 380 |
union { |
| 381 |
struct iwl_dev_tx_power_cmd_v3 v3; |
| 382 |
struct iwl_dev_tx_power_cmd_v4 v4; |
| 383 |
struct iwl_dev_tx_power_cmd_v5 v5; |
| 384 |
struct iwl_dev_tx_power_cmd_v8 v8; |
| 385 |
}; |
| 386 |
}; |
| 387 |
|
| 388 |
/** |
| 389 |
* struct iwl_dev_tx_power_cmd_v9 - TX power reduction cmd |
| 390 |
* @reserved: reserved (padding) |
| 391 |
* @per_chain: per chain restrictions |
| 392 |
* @per_chain_restriction_changed: is per_chain_restriction has changed |
| 393 |
* from last command. used if set_mode is |
| 394 |
* IWL_TX_POWER_MODE_SET_SAR_TIMER. |
| 395 |
* note: if not changed, the command is used for keep alive only. |
| 396 |
* @reserved1: reserved (padding) |
| 397 |
* @timer_period: timer in milliseconds. if expires FW will change to default |
| 398 |
* BIOS values. relevant if setMode is IWL_TX_POWER_MODE_SET_SAR_TIMER |
| 399 |
*/ |
| 400 |
struct iwl_dev_tx_power_cmd_v9 { |
| 401 |
__le16 reserved; |
| 402 |
__le16 per_chain[IWL_NUM_CHAIN_LIMITS][IWL_NUM_SUB_BANDS_V1]; |
| 403 |
u8 per_chain_restriction_changed; |
| 404 |
u8 reserved1[3]; |
| 405 |
__le32 timer_period; |
| 406 |
} __packed; /* TX_REDUCED_POWER_API_S_VER_9 */ |
| 407 |
|
| 408 |
/** |
| 409 |
* struct iwl_dev_tx_power_cmd_v10 - TX power reduction cmd |
| 410 |
* @per_chain: per chain restrictions |
| 411 |
* @per_chain_restriction_changed: is per_chain_restriction has changed |
| 412 |
* from last command. used if set_mode is |
| 413 |
* IWL_TX_POWER_MODE_SET_SAR_TIMER. |
| 414 |
* note: if not changed, the command is used for keep alive only. |
| 415 |
* @reserved: reserved (padding) |
| 416 |
* @timer_period: timer in milliseconds. if expires FW will change to default |
| 417 |
* BIOS values. relevant if setMode is IWL_TX_POWER_MODE_SET_SAR_TIMER |
| 418 |
* @flags: reduce power flags. |
| 419 |
*/ |
| 420 |
struct iwl_dev_tx_power_cmd_v10 { |
| 421 |
__le16 per_chain[IWL_NUM_CHAIN_TABLES_V2][IWL_NUM_CHAIN_LIMITS][IWL_NUM_SUB_BANDS_V2]; |
| 422 |
u8 per_chain_restriction_changed; |
| 423 |
u8 reserved; |
| 424 |
__le32 timer_period; |
| 425 |
__le32 flags; |
| 426 |
} __packed; /* TX_REDUCED_POWER_API_S_VER_10 */ |
| 427 |
|
| 428 |
/* |
| 429 |
* struct iwl_dev_tx_power_cmd - TX power reduction command (multiversion) |
| 430 |
* @common: common part of the command |
| 431 |
* @v9: version 9 part of the command |
| 432 |
* @v10: version 10 part of the command |
| 433 |
*/ |
| 434 |
struct iwl_dev_tx_power_cmd { |
| 435 |
struct iwl_dev_tx_power_common common; |
| 436 |
union { |
| 437 |
struct iwl_dev_tx_power_cmd_v9 v9; |
| 438 |
struct iwl_dev_tx_power_cmd_v10 v10; |
| 439 |
}; |
| 440 |
} __packed; /* TX_REDUCED_POWER_API_S_VER_9_VER10 */ |
| 441 |
|
| 442 |
#define IWL_NUM_GEO_PROFILES 3 |
| 443 |
#define IWL_NUM_GEO_PROFILES_V3 8 |
| 444 |
#define IWL_NUM_BANDS_PER_CHAIN_V1 2 |
| 445 |
#define IWL_NUM_BANDS_PER_CHAIN_V2 3 |
| 446 |
|
| 447 |
/** |
| 448 |
* enum iwl_geo_per_chain_offset_operation - type of operation |
| 449 |
* @IWL_PER_CHAIN_OFFSET_SET_TABLES: send the tables from the host to the FW. |
| 450 |
* @IWL_PER_CHAIN_OFFSET_GET_CURRENT_TABLE: retrieve the last configured table. |
| 451 |
*/ |
| 452 |
enum iwl_geo_per_chain_offset_operation { |
| 453 |
IWL_PER_CHAIN_OFFSET_SET_TABLES, |
| 454 |
IWL_PER_CHAIN_OFFSET_GET_CURRENT_TABLE, |
| 455 |
}; /* PER_CHAIN_OFFSET_OPERATION_E */ |
| 456 |
|
| 457 |
/** |
| 458 |
* struct iwl_per_chain_offset - embedded struct for PER_CHAIN_LIMIT_OFFSET_CMD. |
| 459 |
* @max_tx_power: maximum allowed tx power. |
| 460 |
* @chain_a: tx power offset for chain a. |
| 461 |
* @chain_b: tx power offset for chain b. |
| 462 |
*/ |
| 463 |
struct iwl_per_chain_offset { |
| 464 |
__le16 max_tx_power; |
| 465 |
u8 chain_a; |
| 466 |
u8 chain_b; |
| 467 |
} __packed; /* PER_CHAIN_LIMIT_OFFSET_PER_CHAIN_S_VER_1 */ |
| 468 |
|
| 469 |
/** |
| 470 |
* struct iwl_geo_tx_power_profiles_cmd_v1 - struct for PER_CHAIN_LIMIT_OFFSET_CMD cmd. |
| 471 |
* @ops: operations, value from &enum iwl_geo_per_chain_offset_operation |
| 472 |
* @table: offset profile per band. |
| 473 |
*/ |
| 474 |
struct iwl_geo_tx_power_profiles_cmd_v1 { |
| 475 |
__le32 ops; |
| 476 |
struct iwl_per_chain_offset table[IWL_NUM_GEO_PROFILES][IWL_NUM_BANDS_PER_CHAIN_V1]; |
| 477 |
} __packed; /* PER_CHAIN_LIMIT_OFFSET_CMD_VER_1 */ |
| 478 |
|
| 479 |
/** |
| 480 |
* struct iwl_geo_tx_power_profiles_cmd_v2 - struct for PER_CHAIN_LIMIT_OFFSET_CMD cmd. |
| 481 |
* @ops: operations, value from &enum iwl_geo_per_chain_offset_operation |
| 482 |
* @table: offset profile per band. |
| 483 |
* @table_revision: 0 for not-South Korea, 1 for South Korea (the name is misleading) |
| 484 |
*/ |
| 485 |
struct iwl_geo_tx_power_profiles_cmd_v2 { |
| 486 |
__le32 ops; |
| 487 |
struct iwl_per_chain_offset table[IWL_NUM_GEO_PROFILES][IWL_NUM_BANDS_PER_CHAIN_V1]; |
| 488 |
__le32 table_revision; |
| 489 |
} __packed; /* PER_CHAIN_LIMIT_OFFSET_CMD_VER_2 */ |
| 490 |
|
| 491 |
/** |
| 492 |
* struct iwl_geo_tx_power_profiles_cmd_v3 - struct for PER_CHAIN_LIMIT_OFFSET_CMD cmd. |
| 493 |
* @ops: operations, value from &enum iwl_geo_per_chain_offset_operation |
| 494 |
* @table: offset profile per band. |
| 495 |
* @table_revision: 0 for not-South Korea, 1 for South Korea (the name is misleading) |
| 496 |
*/ |
| 497 |
struct iwl_geo_tx_power_profiles_cmd_v3 { |
| 498 |
__le32 ops; |
| 499 |
struct iwl_per_chain_offset table[IWL_NUM_GEO_PROFILES][IWL_NUM_BANDS_PER_CHAIN_V2]; |
| 500 |
__le32 table_revision; |
| 501 |
} __packed; /* PER_CHAIN_LIMIT_OFFSET_CMD_VER_3 */ |
| 502 |
|
| 503 |
/** |
| 504 |
* struct iwl_geo_tx_power_profiles_cmd_v4 - struct for PER_CHAIN_LIMIT_OFFSET_CMD cmd. |
| 505 |
* @ops: operations, value from &enum iwl_geo_per_chain_offset_operation |
| 506 |
* @table: offset profile per band. |
| 507 |
* @table_revision: 0 for not-South Korea, 1 for South Korea (the name is misleading) |
| 508 |
*/ |
| 509 |
struct iwl_geo_tx_power_profiles_cmd_v4 { |
| 510 |
__le32 ops; |
| 511 |
struct iwl_per_chain_offset table[IWL_NUM_GEO_PROFILES_V3][IWL_NUM_BANDS_PER_CHAIN_V1]; |
| 512 |
__le32 table_revision; |
| 513 |
} __packed; /* PER_CHAIN_LIMIT_OFFSET_CMD_VER_4 */ |
| 514 |
|
| 515 |
/** |
| 516 |
* struct iwl_geo_tx_power_profiles_cmd_v5 - struct for PER_CHAIN_LIMIT_OFFSET_CMD cmd. |
| 517 |
* @ops: operations, value from &enum iwl_geo_per_chain_offset_operation |
| 518 |
* @table: offset profile per band. |
| 519 |
* @table_revision: 0 for not-South Korea, 1 for South Korea (the name is misleading) |
| 520 |
*/ |
| 521 |
struct iwl_geo_tx_power_profiles_cmd_v5 { |
| 522 |
__le32 ops; |
| 523 |
struct iwl_per_chain_offset table[IWL_NUM_GEO_PROFILES_V3][IWL_NUM_BANDS_PER_CHAIN_V2]; |
| 524 |
__le32 table_revision; |
| 525 |
} __packed; /* PER_CHAIN_LIMIT_OFFSET_CMD_VER_5 */ |
| 526 |
|
| 527 |
union iwl_geo_tx_power_profiles_cmd { |
| 528 |
struct iwl_geo_tx_power_profiles_cmd_v1 v1; |
| 529 |
struct iwl_geo_tx_power_profiles_cmd_v2 v2; |
| 530 |
struct iwl_geo_tx_power_profiles_cmd_v3 v3; |
| 531 |
struct iwl_geo_tx_power_profiles_cmd_v4 v4; |
| 532 |
struct iwl_geo_tx_power_profiles_cmd_v5 v5; |
| 533 |
}; |
| 534 |
|
| 535 |
/** |
| 536 |
* struct iwl_geo_tx_power_profiles_resp - response to PER_CHAIN_LIMIT_OFFSET_CMD cmd |
| 537 |
* @profile_idx: current geo profile in use |
| 538 |
*/ |
| 539 |
struct iwl_geo_tx_power_profiles_resp { |
| 540 |
__le32 profile_idx; |
| 541 |
} __packed; /* PER_CHAIN_LIMIT_OFFSET_RSP */ |
| 542 |
|
| 543 |
/** |
| 544 |
* enum iwl_ppag_flags - PPAG enable masks |
| 545 |
* @IWL_PPAG_ETSI_MASK: enable PPAG in ETSI |
| 546 |
* @IWL_PPAG_CHINA_MASK: enable PPAG in China |
| 547 |
* @IWL_PPAG_ETSI_LPI_UHB_MASK: enable LPI in ETSI for UHB |
| 548 |
* @IWL_PPAG_ETSI_VLP_UHB_MASK: enable VLP in ETSI for UHB |
| 549 |
* @IWL_PPAG_ETSI_SP_UHB_MASK: enable SP in ETSI for UHB |
| 550 |
* @IWL_PPAG_USA_LPI_UHB_MASK: enable LPI in USA for UHB |
| 551 |
* @IWL_PPAG_USA_VLP_UHB_MASK: enable VLP in USA for UHB |
| 552 |
* @IWL_PPAG_USA_SP_UHB_MASK: enable SP in USA for UHB |
| 553 |
* @IWL_PPAG_CANADA_LPI_UHB_MASK: enable LPI in CANADA for UHB |
| 554 |
* @IWL_PPAG_CANADA_VLP_UHB_MASK: enable VLP in CANADA for UHB |
| 555 |
* @IWL_PPAG_CANADA_SP_UHB_MASK: enable SP in CANADA for UHB |
| 556 |
*/ |
| 557 |
enum iwl_ppag_flags { |
| 558 |
IWL_PPAG_ETSI_MASK = BIT(0), |
| 559 |
IWL_PPAG_CHINA_MASK = BIT(1), |
| 560 |
IWL_PPAG_ETSI_LPI_UHB_MASK = BIT(2), |
| 561 |
IWL_PPAG_ETSI_VLP_UHB_MASK = BIT(3), |
| 562 |
IWL_PPAG_ETSI_SP_UHB_MASK = BIT(4), |
| 563 |
IWL_PPAG_USA_LPI_UHB_MASK = BIT(5), |
| 564 |
IWL_PPAG_USA_VLP_UHB_MASK = BIT(6), |
| 565 |
IWL_PPAG_USA_SP_UHB_MASK = BIT(7), |
| 566 |
IWL_PPAG_CANADA_LPI_UHB_MASK = BIT(8), |
| 567 |
IWL_PPAG_CANADA_VLP_UHB_MASK = BIT(9), |
| 568 |
IWL_PPAG_CANADA_SP_UHB_MASK = BIT(10), |
| 569 |
}; |
| 570 |
|
| 571 |
/** |
| 572 |
* union iwl_ppag_table_cmd - union for all versions of PPAG command |
| 573 |
* @v1: command version 1 structure. |
| 574 |
* @v5: command version 5 structure. |
| 575 |
* @v7: command version 7 structure. |
| 576 |
* @v1.flags: values from &enum iwl_ppag_flags |
| 577 |
* @v1.gain: table of antenna gain values per chain and sub-band |
| 578 |
* @v1.reserved: reserved |
| 579 |
* @v5.flags: values from &enum iwl_ppag_flags |
| 580 |
* @v5.gain: table of antenna gain values per chain and sub-band |
| 581 |
* @v7.ppag_config_info: see @struct bios_value_u32 |
| 582 |
* @v7.gain: table of antenna gain values per chain and sub-band |
| 583 |
* @v7.reserved: reserved |
| 584 |
*/ |
| 585 |
union iwl_ppag_table_cmd { |
| 586 |
struct { |
| 587 |
__le32 flags; |
| 588 |
s8 gain[IWL_NUM_CHAIN_LIMITS][IWL_NUM_SUB_BANDS_V1]; |
| 589 |
s8 reserved[2]; |
| 590 |
} __packed v1; /* PER_PLAT_ANTENNA_GAIN_CMD_API_S_VER_1 */ |
| 591 |
struct { |
| 592 |
__le32 flags; |
| 593 |
s8 gain[IWL_NUM_CHAIN_LIMITS][IWL_NUM_SUB_BANDS_V2]; |
| 594 |
s8 reserved[2]; |
| 595 |
} __packed v5; /* PER_PLAT_ANTENNA_GAIN_CMD_API_S_VER_5 */ |
| 596 |
struct { |
| 597 |
struct bios_value_u32 ppag_config_info; |
| 598 |
s8 gain[IWL_NUM_CHAIN_LIMITS][IWL_NUM_SUB_BANDS_V2]; |
| 599 |
s8 reserved[2]; |
| 600 |
} __packed v7; /* PER_PLAT_ANTENNA_GAIN_CMD_API_S_VER_7 */ |
| 601 |
} __packed; |
| 602 |
|
| 603 |
#define IWL_PPAG_CMD_V1_MASK (IWL_PPAG_ETSI_MASK | IWL_PPAG_CHINA_MASK) |
| 604 |
#define IWL_PPAG_CMD_V5_MASK (IWL_PPAG_CMD_V1_MASK | \ |
| 605 |
IWL_PPAG_ETSI_LPI_UHB_MASK | \ |
| 606 |
IWL_PPAG_USA_LPI_UHB_MASK) |
| 607 |
|
| 608 |
#define MCC_TO_SAR_OFFSET_TABLE_ROW_SIZE 26 |
| 609 |
#define MCC_TO_SAR_OFFSET_TABLE_COL_SIZE 13 |
| 610 |
|
| 611 |
/** |
| 612 |
* struct iwl_sar_offset_mapping_cmd - struct for SAR_OFFSET_MAPPING_TABLE_CMD |
| 613 |
* @offset_map: mapping a mcc to a geo sar group |
| 614 |
* @reserved: reserved |
| 615 |
*/ |
| 616 |
struct iwl_sar_offset_mapping_cmd { |
| 617 |
u8 offset_map[MCC_TO_SAR_OFFSET_TABLE_ROW_SIZE] |
| 618 |
[MCC_TO_SAR_OFFSET_TABLE_COL_SIZE]; |
| 619 |
__le16 reserved; |
| 620 |
} __packed; /*SAR_OFFSET_MAPPING_TABLE_CMD_API_S*/ |
| 621 |
|
| 622 |
/** |
| 623 |
* struct iwl_beacon_filter_cmd - beacon filter command |
| 624 |
* REPLY_BEACON_FILTERING_CMD = 0xd2 (command) |
| 625 |
* @bf_energy_delta: Used for RSSI filtering, if in 'normal' state. Send beacon |
| 626 |
* to driver if delta in Energy values calculated for this and last |
| 627 |
* passed beacon is greater than this threshold. Zero value means that |
| 628 |
* the Energy change is ignored for beacon filtering, and beacon will |
| 629 |
* not be forced to be sent to driver regardless of this delta. Typical |
| 630 |
* energy delta 5dB. |
| 631 |
* @bf_roaming_energy_delta: Used for RSSI filtering, if in 'roaming' state. |
| 632 |
* Send beacon to driver if delta in Energy values calculated for this |
| 633 |
* and last passed beacon is greater than this threshold. Zero value |
| 634 |
* means that the Energy change is ignored for beacon filtering while in |
| 635 |
* Roaming state, typical energy delta 1dB. |
| 636 |
* @bf_roaming_state: Used for RSSI filtering. If absolute Energy values |
| 637 |
* calculated for current beacon is less than the threshold, use |
| 638 |
* Roaming Energy Delta Threshold, otherwise use normal Energy Delta |
| 639 |
* Threshold. Typical energy threshold is -72dBm. |
| 640 |
* @bf_temp_threshold: This threshold determines the type of temperature |
| 641 |
* filtering (Slow or Fast) that is selected (Units are in Celsius): |
| 642 |
* If the current temperature is above this threshold - Fast filter |
| 643 |
* will be used, If the current temperature is below this threshold - |
| 644 |
* Slow filter will be used. |
| 645 |
* @bf_temp_fast_filter: Send Beacon to driver if delta in temperature values |
| 646 |
* calculated for this and the last passed beacon is greater than this |
| 647 |
* threshold. Zero value means that the temperature change is ignored for |
| 648 |
* beacon filtering; beacons will not be forced to be sent to driver |
| 649 |
* regardless of whether its temperature has been changed. |
| 650 |
* @bf_temp_slow_filter: Send Beacon to driver if delta in temperature values |
| 651 |
* calculated for this and the last passed beacon is greater than this |
| 652 |
* threshold. Zero value means that the temperature change is ignored for |
| 653 |
* beacon filtering; beacons will not be forced to be sent to driver |
| 654 |
* regardless of whether its temperature has been changed. |
| 655 |
* @bf_enable_beacon_filter: 1, beacon filtering is enabled; 0, disabled. |
| 656 |
* @bf_debug_flag: beacon filtering debug configuration |
| 657 |
* @bf_escape_timer: Send beacons to to driver if no beacons were passed |
| 658 |
* for a specific period of time. Units: Beacons. |
| 659 |
* @ba_escape_timer: Fully receive and parse beacon if no beacons were passed |
| 660 |
* for a longer period of time then this escape-timeout. Units: Beacons. |
| 661 |
* @ba_enable_beacon_abort: 1, beacon abort is enabled; 0, disabled. |
| 662 |
* @bf_threshold_absolute_low: See below. |
| 663 |
* @bf_threshold_absolute_high: Send Beacon to driver if Energy value calculated |
| 664 |
* for this beacon crossed this absolute threshold. For the 'Increase' |
| 665 |
* direction the bf_energy_absolute_low[i] is used. For the 'Decrease' |
| 666 |
* direction the bf_energy_absolute_high[i] is used. Zero value means |
| 667 |
* that this specific threshold is ignored for beacon filtering, and |
| 668 |
* beacon will not be forced to be sent to driver due to this setting. |
| 669 |
*/ |
| 670 |
struct iwl_beacon_filter_cmd { |
| 671 |
__le32 bf_energy_delta; |
| 672 |
__le32 bf_roaming_energy_delta; |
| 673 |
__le32 bf_roaming_state; |
| 674 |
__le32 bf_temp_threshold; |
| 675 |
__le32 bf_temp_fast_filter; |
| 676 |
__le32 bf_temp_slow_filter; |
| 677 |
__le32 bf_enable_beacon_filter; |
| 678 |
__le32 bf_debug_flag; |
| 679 |
__le32 bf_escape_timer; |
| 680 |
__le32 ba_escape_timer; |
| 681 |
__le32 ba_enable_beacon_abort; |
| 682 |
__le32 bf_threshold_absolute_low[2]; |
| 683 |
__le32 bf_threshold_absolute_high[2]; |
| 684 |
} __packed; /* BEACON_FILTER_CONFIG_API_S_VER_4 */ |
| 685 |
|
| 686 |
/* Beacon filtering and beacon abort */ |
| 687 |
#define IWL_BF_ENERGY_DELTA_DEFAULT 5 |
| 688 |
#define IWL_BF_ENERGY_DELTA_D0I3 20 |
| 689 |
#define IWL_BF_ENERGY_DELTA_MAX 255 |
| 690 |
#define IWL_BF_ENERGY_DELTA_MIN 0 |
| 691 |
|
| 692 |
#define IWL_BF_ROAMING_ENERGY_DELTA_DEFAULT 1 |
| 693 |
#define IWL_BF_ROAMING_ENERGY_DELTA_D0I3 20 |
| 694 |
#define IWL_BF_ROAMING_ENERGY_DELTA_MAX 255 |
| 695 |
#define IWL_BF_ROAMING_ENERGY_DELTA_MIN 0 |
| 696 |
|
| 697 |
#define IWL_BF_ROAMING_STATE_DEFAULT 72 |
| 698 |
#define IWL_BF_ROAMING_STATE_D0I3 72 |
| 699 |
#define IWL_BF_ROAMING_STATE_MAX 255 |
| 700 |
#define IWL_BF_ROAMING_STATE_MIN 0 |
| 701 |
|
| 702 |
#define IWL_BF_TEMP_THRESHOLD_DEFAULT 112 |
| 703 |
#define IWL_BF_TEMP_THRESHOLD_D0I3 112 |
| 704 |
#define IWL_BF_TEMP_THRESHOLD_MAX 255 |
| 705 |
#define IWL_BF_TEMP_THRESHOLD_MIN 0 |
| 706 |
|
| 707 |
#define IWL_BF_TEMP_FAST_FILTER_DEFAULT 1 |
| 708 |
#define IWL_BF_TEMP_FAST_FILTER_D0I3 1 |
| 709 |
#define IWL_BF_TEMP_FAST_FILTER_MAX 255 |
| 710 |
#define IWL_BF_TEMP_FAST_FILTER_MIN 0 |
| 711 |
|
| 712 |
#define IWL_BF_TEMP_SLOW_FILTER_DEFAULT 5 |
| 713 |
#define IWL_BF_TEMP_SLOW_FILTER_D0I3 20 |
| 714 |
#define IWL_BF_TEMP_SLOW_FILTER_MAX 255 |
| 715 |
#define IWL_BF_TEMP_SLOW_FILTER_MIN 0 |
| 716 |
|
| 717 |
#define IWL_BF_ENABLE_BEACON_FILTER_DEFAULT 1 |
| 718 |
|
| 719 |
#define IWL_BF_DEBUG_FLAG_DEFAULT 0 |
| 720 |
#define IWL_BF_DEBUG_FLAG_D0I3 0 |
| 721 |
|
| 722 |
#define IWL_BF_ESCAPE_TIMER_DEFAULT 0 |
| 723 |
#define IWL_BF_ESCAPE_TIMER_D0I3 0 |
| 724 |
#define IWL_BF_ESCAPE_TIMER_MAX 1024 |
| 725 |
#define IWL_BF_ESCAPE_TIMER_MIN 0 |
| 726 |
|
| 727 |
#define IWL_BA_ESCAPE_TIMER_DEFAULT 6 |
| 728 |
#define IWL_BA_ESCAPE_TIMER_D0I3 6 |
| 729 |
#define IWL_BA_ESCAPE_TIMER_D3 9 |
| 730 |
#define IWL_BA_ESCAPE_TIMER_MAX 1024 |
| 731 |
#define IWL_BA_ESCAPE_TIMER_MIN 0 |
| 732 |
|
| 733 |
#define IWL_BA_ENABLE_BEACON_ABORT_DEFAULT 1 |
| 734 |
|
| 735 |
#define IWL_BF_CMD_CONFIG(mode) \ |
| 736 |
.bf_energy_delta = cpu_to_le32(IWL_BF_ENERGY_DELTA ## mode), \ |
| 737 |
.bf_roaming_energy_delta = \ |
| 738 |
cpu_to_le32(IWL_BF_ROAMING_ENERGY_DELTA ## mode), \ |
| 739 |
.bf_roaming_state = cpu_to_le32(IWL_BF_ROAMING_STATE ## mode), \ |
| 740 |
.bf_temp_threshold = cpu_to_le32(IWL_BF_TEMP_THRESHOLD ## mode), \ |
| 741 |
.bf_temp_fast_filter = cpu_to_le32(IWL_BF_TEMP_FAST_FILTER ## mode), \ |
| 742 |
.bf_temp_slow_filter = cpu_to_le32(IWL_BF_TEMP_SLOW_FILTER ## mode), \ |
| 743 |
.bf_debug_flag = cpu_to_le32(IWL_BF_DEBUG_FLAG ## mode), \ |
| 744 |
.bf_escape_timer = cpu_to_le32(IWL_BF_ESCAPE_TIMER ## mode), \ |
| 745 |
.ba_escape_timer = cpu_to_le32(IWL_BA_ESCAPE_TIMER ## mode) |
| 746 |
|
| 747 |
#define IWL_BF_CMD_CONFIG_DEFAULTS IWL_BF_CMD_CONFIG(_DEFAULT) |
| 748 |
#define IWL_BF_CMD_CONFIG_D0I3 IWL_BF_CMD_CONFIG(_D0I3) |
| 749 |
|
| 750 |
#define DEFAULT_TPE_TX_POWER 0x7F |
| 751 |
|
| 752 |
/* |
| 753 |
* Bandwidth: 20/40/80/(160/80+80)/320 |
| 754 |
*/ |
| 755 |
#define IWL_MAX_TX_EIRP_PWR_MAX_SIZE 5 |
| 756 |
#define IWL_MAX_TX_EIRP_PSD_PWR_MAX_SIZE 16 |
| 757 |
|
| 758 |
enum iwl_6ghz_ap_type { |
| 759 |
IWL_6GHZ_AP_TYPE_LPI, |
| 760 |
IWL_6GHZ_AP_TYPE_SP, |
| 761 |
IWL_6GHZ_AP_TYPE_VLP, |
| 762 |
}; /* PHY_AP_TYPE_API_E_VER_1 */ |
| 763 |
|
| 764 |
/** |
| 765 |
* struct iwl_txpower_constraints_cmd - TX power constraints command |
| 766 |
* AP_TX_POWER_CONSTRAINTS_CMD |
| 767 |
* Used for VLP/LPI/AFC Access Point power constraints for 6GHz channels |
| 768 |
* @link_id: linkId |
| 769 |
* @ap_type: see &enum iwl_6ghz_ap_type |
| 770 |
* @eirp_pwr: 8-bit 2s complement signed integer in the range |
| 771 |
* -64 dBm to 63 dBm with a 0.5 dB step |
| 772 |
* default &DEFAULT_TPE_TX_POWER (no maximum limit) |
| 773 |
* @psd_pwr: 8-bit 2s complement signed integer in the range |
| 774 |
* -63.5 to +63 dBm/MHz with a 0.5 step |
| 775 |
* value - 128 indicates that the corresponding 20 |
| 776 |
* MHz channel cannot be used for transmission. |
| 777 |
* value +127 indicates that no maximum PSD limit |
| 778 |
* is specified for the corresponding 20 MHz channel |
| 779 |
* default &DEFAULT_TPE_TX_POWER (no maximum limit) |
| 780 |
* @reserved: reserved (padding) |
| 781 |
*/ |
| 782 |
struct iwl_txpower_constraints_cmd { |
| 783 |
__le16 link_id; |
| 784 |
__le16 ap_type; |
| 785 |
__s8 eirp_pwr[IWL_MAX_TX_EIRP_PWR_MAX_SIZE]; |
| 786 |
__s8 psd_pwr[IWL_MAX_TX_EIRP_PSD_PWR_MAX_SIZE]; |
| 787 |
u8 reserved[3]; |
| 788 |
} __packed; /* PHY_AP_TX_POWER_CONSTRAINTS_CMD_API_S_VER_1 */ |
| 789 |
|
| 790 |
#endif /* __iwl_fw_api_power_h__ */ |