| 1 |
/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ |
| 2 |
/* |
| 3 |
* Copyright (C) 2015-2017 Intel Deutschland GmbH |
| 4 |
* Copyright (C) 2018-2022 Intel Corporation |
| 5 |
* Copyright (C) 2024-2025 Intel Corporation |
| 6 |
*/ |
| 7 |
#ifndef __iwl_fw_api_location_h__ |
| 8 |
#define __iwl_fw_api_location_h__ |
| 9 |
#include <linux/ieee80211.h> |
| 10 |
#include <linux/if_ether.h> |
| 11 |
#include <linux/types.h> |
| 12 |
#include <linux/bits.h> |
| 13 |
#include "rs.h" |
| 14 |
|
| 15 |
/** |
| 16 |
* enum iwl_location_subcmd_ids - location group command IDs |
| 17 |
*/ |
| 18 |
enum iwl_location_subcmd_ids { |
| 19 |
/** |
| 20 |
* @TOF_RANGE_REQ_CMD: TOF ranging request, |
| 21 |
* uses one of &struct iwl_tof_range_req_cmd_v5, |
| 22 |
* &struct iwl_tof_range_req_cmd_v7, |
| 23 |
* &struct iwl_tof_range_req_cmd_v8, |
| 24 |
* &struct iwl_tof_range_req_cmd_v9, |
| 25 |
* &struct iwl_tof_range_req_cmd_v11, |
| 26 |
* &struct iwl_tof_range_req_cmd_v7 |
| 27 |
*/ |
| 28 |
TOF_RANGE_REQ_CMD = 0x0, |
| 29 |
/** |
| 30 |
* @TOF_CONFIG_CMD: TOF configuration, uses &struct iwl_tof_config_cmd |
| 31 |
*/ |
| 32 |
TOF_CONFIG_CMD = 0x1, |
| 33 |
/** |
| 34 |
* @TOF_RANGE_ABORT_CMD: abort ongoing ranging, uses |
| 35 |
* &struct iwl_tof_range_abort_cmd |
| 36 |
*/ |
| 37 |
TOF_RANGE_ABORT_CMD = 0x2, |
| 38 |
/** |
| 39 |
* @TOF_RANGE_REQ_EXT_CMD: TOF extended ranging config, |
| 40 |
* uses &struct iwl_tof_range_req_ext_cmd |
| 41 |
*/ |
| 42 |
TOF_RANGE_REQ_EXT_CMD = 0x3, |
| 43 |
/** |
| 44 |
* @TOF_RESPONDER_CONFIG_CMD: FTM responder configuration, one of |
| 45 |
* &struct iwl_tof_responder_config_cmd_v6, |
| 46 |
* &struct iwl_tof_responder_config_cmd_v7, |
| 47 |
* &struct iwl_tof_responder_config_cmd_v8 or |
| 48 |
* &struct iwl_tof_responder_config_cmd_v9 |
| 49 |
*/ |
| 50 |
TOF_RESPONDER_CONFIG_CMD = 0x4, |
| 51 |
/** |
| 52 |
* @TOF_RESPONDER_DYN_CONFIG_CMD: FTM dynamic configuration, |
| 53 |
* uses &struct iwl_tof_responder_dyn_config_cmd |
| 54 |
*/ |
| 55 |
TOF_RESPONDER_DYN_CONFIG_CMD = 0x5, |
| 56 |
/** |
| 57 |
* @CSI_HEADER_NOTIFICATION: CSI header |
| 58 |
*/ |
| 59 |
CSI_HEADER_NOTIFICATION = 0xFA, |
| 60 |
/** |
| 61 |
* @CSI_CHUNKS_NOTIFICATION: CSI chunk, |
| 62 |
* uses &struct iwl_csi_chunk_notification |
| 63 |
*/ |
| 64 |
CSI_CHUNKS_NOTIFICATION = 0xFB, |
| 65 |
/** |
| 66 |
* @TOF_LC_NOTIF: used for LCI/civic location, contains just |
| 67 |
* the action frame |
| 68 |
*/ |
| 69 |
TOF_LC_NOTIF = 0xFC, |
| 70 |
/** |
| 71 |
* @TOF_RESPONDER_STATS: FTM responder statistics notification, |
| 72 |
* uses &struct iwl_ftm_responder_stats |
| 73 |
*/ |
| 74 |
TOF_RESPONDER_STATS = 0xFD, |
| 75 |
/** |
| 76 |
* @TOF_MCSI_DEBUG_NOTIF: MCSI debug notification, uses |
| 77 |
* &struct iwl_tof_mcsi_notif |
| 78 |
*/ |
| 79 |
TOF_MCSI_DEBUG_NOTIF = 0xFE, |
| 80 |
/** |
| 81 |
* @TOF_RANGE_RESPONSE_NOTIF: ranging response, using one of |
| 82 |
* &struct iwl_tof_range_rsp_ntfy_v5, |
| 83 |
* &struct iwl_tof_range_rsp_ntfy_v6, |
| 84 |
* &struct iwl_tof_range_rsp_ntfy_v7 or |
| 85 |
* &struct iwl_tof_range_rsp_ntfy_v8 |
| 86 |
*/ |
| 87 |
TOF_RANGE_RESPONSE_NOTIF = 0xFF, |
| 88 |
}; |
| 89 |
|
| 90 |
/** |
| 91 |
* struct iwl_tof_config_cmd - ToF configuration |
| 92 |
* @tof_disabled: indicates if ToF is disabled (or not) |
| 93 |
* @one_sided_disabled: indicates if one-sided is disabled (or not) |
| 94 |
* @is_debug_mode: indiciates if debug mode is active |
| 95 |
* @is_buf_required: indicates if channel estimation buffer is required |
| 96 |
*/ |
| 97 |
struct iwl_tof_config_cmd { |
| 98 |
u8 tof_disabled; |
| 99 |
u8 one_sided_disabled; |
| 100 |
u8 is_debug_mode; |
| 101 |
u8 is_buf_required; |
| 102 |
} __packed; |
| 103 |
|
| 104 |
/** |
| 105 |
* enum iwl_tof_bandwidth - values for iwl_tof_range_req_ap_entry.bandwidth |
| 106 |
* @IWL_TOF_BW_20_LEGACY: 20 MHz non-HT |
| 107 |
* @IWL_TOF_BW_20_HT: 20 MHz HT |
| 108 |
* @IWL_TOF_BW_40: 40 MHz |
| 109 |
* @IWL_TOF_BW_80: 80 MHz |
| 110 |
* @IWL_TOF_BW_160: 160 MHz |
| 111 |
* @IWL_TOF_BW_NUM: number of tof bandwidths |
| 112 |
*/ |
| 113 |
enum iwl_tof_bandwidth { |
| 114 |
IWL_TOF_BW_20_LEGACY, |
| 115 |
IWL_TOF_BW_20_HT, |
| 116 |
IWL_TOF_BW_40, |
| 117 |
IWL_TOF_BW_80, |
| 118 |
IWL_TOF_BW_160, |
| 119 |
IWL_TOF_BW_NUM, |
| 120 |
}; /* LOCAT_BW_TYPE_E */ |
| 121 |
|
| 122 |
/* |
| 123 |
* enum iwl_tof_algo_type - Algorithym type for range measurement request |
| 124 |
*/ |
| 125 |
enum iwl_tof_algo_type { |
| 126 |
IWL_TOF_ALGO_TYPE_MAX_LIKE = 0, |
| 127 |
IWL_TOF_ALGO_TYPE_LINEAR_REG = 1, |
| 128 |
IWL_TOF_ALGO_TYPE_FFT = 2, |
| 129 |
|
| 130 |
/* Keep last */ |
| 131 |
IWL_TOF_ALGO_TYPE_INVALID, |
| 132 |
}; /* ALGO_TYPE_E */ |
| 133 |
|
| 134 |
/* |
| 135 |
* enum iwl_tof_mcsi_ntfy - Enable/Disable MCSI notifications |
| 136 |
*/ |
| 137 |
enum iwl_tof_mcsi_enable { |
| 138 |
IWL_TOF_MCSI_DISABLED = 0, |
| 139 |
IWL_TOF_MCSI_ENABLED = 1, |
| 140 |
}; /* MCSI_ENABLE_E */ |
| 141 |
|
| 142 |
/** |
| 143 |
* enum iwl_tof_responder_cmd_valid_field - valid fields in the responder cfg |
| 144 |
* @IWL_TOF_RESPONDER_CMD_VALID_CHAN_INFO: channel info is valid |
| 145 |
* @IWL_TOF_RESPONDER_CMD_VALID_TOA_OFFSET: ToA offset is valid |
| 146 |
* @IWL_TOF_RESPONDER_CMD_VALID_COMMON_CALIB: common calibration mode is valid |
| 147 |
* @IWL_TOF_RESPONDER_CMD_VALID_SPECIFIC_CALIB: spefici calibration mode is |
| 148 |
* valid |
| 149 |
* @IWL_TOF_RESPONDER_CMD_VALID_BSSID: BSSID is valid |
| 150 |
* @IWL_TOF_RESPONDER_CMD_VALID_TX_ANT: TX antenna is valid |
| 151 |
* @IWL_TOF_RESPONDER_CMD_VALID_ALGO_TYPE: algorithm type is valid |
| 152 |
* @IWL_TOF_RESPONDER_CMD_VALID_NON_ASAP_SUPPORT: non-ASAP support is valid |
| 153 |
* @IWL_TOF_RESPONDER_CMD_VALID_STATISTICS_REPORT_SUPPORT: statistics report |
| 154 |
* support is valid |
| 155 |
* @IWL_TOF_RESPONDER_CMD_VALID_MCSI_NOTIF_SUPPORT: MCSI notification support |
| 156 |
* is valid |
| 157 |
* @IWL_TOF_RESPONDER_CMD_VALID_FAST_ALGO_SUPPORT: fast algorithm support |
| 158 |
* is valid |
| 159 |
* @IWL_TOF_RESPONDER_CMD_VALID_RETRY_ON_ALGO_FAIL: retry on algorithm failure |
| 160 |
* is valid |
| 161 |
* @IWL_TOF_RESPONDER_CMD_VALID_STA_ID: station ID is valid |
| 162 |
* @IWL_TOF_RESPONDER_CMD_VALID_NDP_SUPPORT: enable/disable NDP ranging support |
| 163 |
* is valid |
| 164 |
* @IWL_TOF_RESPONDER_CMD_VALID_NDP_PARAMS: NDP parameters are valid |
| 165 |
* @IWL_TOF_RESPONDER_CMD_VALID_LMR_FEEDBACK: LMR feedback support is valid |
| 166 |
* @IWL_TOF_RESPONDER_CMD_VALID_SESSION_ID: session id flag is valid |
| 167 |
* @IWL_TOF_RESPONDER_CMD_VALID_BSS_COLOR: the bss_color field is valid |
| 168 |
* @IWL_TOF_RESPONDER_CMD_VALID_MIN_MAX_TIME_BETWEEN_MSR: the |
| 169 |
* min_time_between_msr and max_time_between_msr fields are valid |
| 170 |
*/ |
| 171 |
enum iwl_tof_responder_cmd_valid_field { |
| 172 |
IWL_TOF_RESPONDER_CMD_VALID_CHAN_INFO = BIT(0), |
| 173 |
IWL_TOF_RESPONDER_CMD_VALID_TOA_OFFSET = BIT(1), |
| 174 |
IWL_TOF_RESPONDER_CMD_VALID_COMMON_CALIB = BIT(2), |
| 175 |
IWL_TOF_RESPONDER_CMD_VALID_SPECIFIC_CALIB = BIT(3), |
| 176 |
IWL_TOF_RESPONDER_CMD_VALID_BSSID = BIT(4), |
| 177 |
IWL_TOF_RESPONDER_CMD_VALID_TX_ANT = BIT(5), |
| 178 |
IWL_TOF_RESPONDER_CMD_VALID_ALGO_TYPE = BIT(6), |
| 179 |
IWL_TOF_RESPONDER_CMD_VALID_NON_ASAP_SUPPORT = BIT(7), |
| 180 |
IWL_TOF_RESPONDER_CMD_VALID_STATISTICS_REPORT_SUPPORT = BIT(8), |
| 181 |
IWL_TOF_RESPONDER_CMD_VALID_MCSI_NOTIF_SUPPORT = BIT(9), |
| 182 |
IWL_TOF_RESPONDER_CMD_VALID_FAST_ALGO_SUPPORT = BIT(10), |
| 183 |
IWL_TOF_RESPONDER_CMD_VALID_RETRY_ON_ALGO_FAIL = BIT(11), |
| 184 |
IWL_TOF_RESPONDER_CMD_VALID_STA_ID = BIT(12), |
| 185 |
IWL_TOF_RESPONDER_CMD_VALID_NDP_SUPPORT = BIT(22), |
| 186 |
IWL_TOF_RESPONDER_CMD_VALID_NDP_PARAMS = BIT(23), |
| 187 |
IWL_TOF_RESPONDER_CMD_VALID_LMR_FEEDBACK = BIT(24), |
| 188 |
IWL_TOF_RESPONDER_CMD_VALID_SESSION_ID = BIT(25), |
| 189 |
IWL_TOF_RESPONDER_CMD_VALID_BSS_COLOR = BIT(26), |
| 190 |
IWL_TOF_RESPONDER_CMD_VALID_MIN_MAX_TIME_BETWEEN_MSR = BIT(27), |
| 191 |
}; |
| 192 |
|
| 193 |
/** |
| 194 |
* enum iwl_tof_responder_cfg_flags - responder configuration flags |
| 195 |
* @IWL_TOF_RESPONDER_FLAGS_NON_ASAP_SUPPORT: non-ASAP support |
| 196 |
* @IWL_TOF_RESPONDER_FLAGS_REPORT_STATISTICS: report statistics |
| 197 |
* @IWL_TOF_RESPONDER_FLAGS_REPORT_MCSI: report MCSI |
| 198 |
* @IWL_TOF_RESPONDER_FLAGS_ALGO_TYPE: algorithm type |
| 199 |
* @IWL_TOF_RESPONDER_FLAGS_TOA_OFFSET_MODE: ToA offset mode |
| 200 |
* @IWL_TOF_RESPONDER_FLAGS_COMMON_CALIB_MODE: common calibration mode |
| 201 |
* @IWL_TOF_RESPONDER_FLAGS_SPECIFIC_CALIB_MODE: specific calibration mode |
| 202 |
* @IWL_TOF_RESPONDER_FLAGS_FAST_ALGO_SUPPORT: fast algorithm support |
| 203 |
* @IWL_TOF_RESPONDER_FLAGS_RETRY_ON_ALGO_FAIL: retry on algorithm fail |
| 204 |
* @IWL_TOF_RESPONDER_FLAGS_FTM_TX_ANT: TX antenna mask |
| 205 |
* @IWL_TOF_RESPONDER_FLAGS_NDP_SUPPORT: support NDP ranging |
| 206 |
* @IWL_TOF_RESPONDER_FLAGS_LMR_FEEDBACK: request for LMR feedback if the |
| 207 |
* initiator supports it |
| 208 |
* @IWL_TOF_RESPONDER_FLAGS_SESSION_ID: send the session id in the initial FTM |
| 209 |
* frame. |
| 210 |
*/ |
| 211 |
enum iwl_tof_responder_cfg_flags { |
| 212 |
IWL_TOF_RESPONDER_FLAGS_NON_ASAP_SUPPORT = BIT(0), |
| 213 |
IWL_TOF_RESPONDER_FLAGS_REPORT_STATISTICS = BIT(1), |
| 214 |
IWL_TOF_RESPONDER_FLAGS_REPORT_MCSI = BIT(2), |
| 215 |
IWL_TOF_RESPONDER_FLAGS_ALGO_TYPE = BIT(3) | BIT(4) | BIT(5), |
| 216 |
IWL_TOF_RESPONDER_FLAGS_TOA_OFFSET_MODE = BIT(6), |
| 217 |
IWL_TOF_RESPONDER_FLAGS_COMMON_CALIB_MODE = BIT(7), |
| 218 |
IWL_TOF_RESPONDER_FLAGS_SPECIFIC_CALIB_MODE = BIT(8), |
| 219 |
IWL_TOF_RESPONDER_FLAGS_FAST_ALGO_SUPPORT = BIT(9), |
| 220 |
IWL_TOF_RESPONDER_FLAGS_RETRY_ON_ALGO_FAIL = BIT(10), |
| 221 |
IWL_TOF_RESPONDER_FLAGS_FTM_TX_ANT = RATE_MCS_ANT_AB_MSK, |
| 222 |
IWL_TOF_RESPONDER_FLAGS_NDP_SUPPORT = BIT(24), |
| 223 |
IWL_TOF_RESPONDER_FLAGS_LMR_FEEDBACK = BIT(25), |
| 224 |
IWL_TOF_RESPONDER_FLAGS_SESSION_ID = BIT(27), |
| 225 |
}; |
| 226 |
|
| 227 |
/** |
| 228 |
* struct iwl_tof_responder_config_cmd_v6 - ToF AP mode (for debug) |
| 229 |
* @cmd_valid_fields: &iwl_tof_responder_cmd_valid_field |
| 230 |
* @responder_cfg_flags: &iwl_tof_responder_cfg_flags |
| 231 |
* @bandwidth: current AP Bandwidth: &enum iwl_tof_bandwidth |
| 232 |
* @rate: current AP rate |
| 233 |
* @channel_num: current AP Channel |
| 234 |
* @ctrl_ch_position: coding of the control channel position relative to |
| 235 |
* the center frequency, see iwl_mvm_get_ctrl_pos() |
| 236 |
* @sta_id: index of the AP STA when in AP mode |
| 237 |
* @reserved1: reserved |
| 238 |
* @toa_offset: Artificial addition [pSec] for the ToA - to be used for debug |
| 239 |
* purposes, simulating station movement by adding various values |
| 240 |
* to this field |
| 241 |
* @common_calib: XVT: common calibration value |
| 242 |
* @specific_calib: XVT: specific calibration value |
| 243 |
* @bssid: Current AP BSSID |
| 244 |
* @reserved2: reserved |
| 245 |
*/ |
| 246 |
struct iwl_tof_responder_config_cmd_v6 { |
| 247 |
__le32 cmd_valid_fields; |
| 248 |
__le32 responder_cfg_flags; |
| 249 |
u8 bandwidth; |
| 250 |
u8 rate; |
| 251 |
u8 channel_num; |
| 252 |
u8 ctrl_ch_position; |
| 253 |
u8 sta_id; |
| 254 |
u8 reserved1; |
| 255 |
__le16 toa_offset; |
| 256 |
__le16 common_calib; |
| 257 |
__le16 specific_calib; |
| 258 |
u8 bssid[ETH_ALEN]; |
| 259 |
__le16 reserved2; |
| 260 |
} __packed; /* TOF_RESPONDER_CONFIG_CMD_API_S_VER_6 */ |
| 261 |
|
| 262 |
/** |
| 263 |
* struct iwl_tof_responder_config_cmd_v7 - ToF AP mode (for debug) |
| 264 |
* @cmd_valid_fields: &iwl_tof_responder_cmd_valid_field |
| 265 |
* @responder_cfg_flags: &iwl_tof_responder_cfg_flags |
| 266 |
* @format_bw: bits 0 - 3: &enum iwl_location_frame_format. |
| 267 |
* bits 4 - 7: &enum iwl_location_bw. |
| 268 |
* @rate: current AP rate |
| 269 |
* @channel_num: current AP Channel |
| 270 |
* @ctrl_ch_position: coding of the control channel position relative to |
| 271 |
* the center frequency, see iwl_mvm_get_ctrl_pos() |
| 272 |
* @sta_id: index of the AP STA when in AP mode |
| 273 |
* @reserved1: reserved |
| 274 |
* @toa_offset: Artificial addition [pSec] for the ToA - to be used for debug |
| 275 |
* purposes, simulating station movement by adding various values |
| 276 |
* to this field |
| 277 |
* @common_calib: XVT: common calibration value |
| 278 |
* @specific_calib: XVT: specific calibration value |
| 279 |
* @bssid: Current AP BSSID |
| 280 |
* @reserved2: reserved |
| 281 |
*/ |
| 282 |
struct iwl_tof_responder_config_cmd_v7 { |
| 283 |
__le32 cmd_valid_fields; |
| 284 |
__le32 responder_cfg_flags; |
| 285 |
u8 format_bw; |
| 286 |
u8 rate; |
| 287 |
u8 channel_num; |
| 288 |
u8 ctrl_ch_position; |
| 289 |
u8 sta_id; |
| 290 |
u8 reserved1; |
| 291 |
__le16 toa_offset; |
| 292 |
__le16 common_calib; |
| 293 |
__le16 specific_calib; |
| 294 |
u8 bssid[ETH_ALEN]; |
| 295 |
__le16 reserved2; |
| 296 |
} __packed; /* TOF_RESPONDER_CONFIG_CMD_API_S_VER_7 */ |
| 297 |
|
| 298 |
#define IWL_RESPONDER_STS_POS 3 |
| 299 |
#define IWL_RESPONDER_TOTAL_LTF_POS 6 |
| 300 |
|
| 301 |
/** |
| 302 |
* struct iwl_tof_responder_config_cmd_v8 - ToF AP mode (for debug) |
| 303 |
* @cmd_valid_fields: &iwl_tof_responder_cmd_valid_field |
| 304 |
* @responder_cfg_flags: &iwl_tof_responder_cfg_flags |
| 305 |
* @format_bw: bits 0 - 3: &enum iwl_location_frame_format. |
| 306 |
* bits 4 - 7: &enum iwl_location_bw. |
| 307 |
* @rate: current AP rate |
| 308 |
* @channel_num: current AP Channel |
| 309 |
* @ctrl_ch_position: coding of the control channel position relative to |
| 310 |
* the center frequency, see iwl_mvm_get_ctrl_pos() |
| 311 |
* @sta_id: index of the AP STA when in AP mode |
| 312 |
* @reserved1: reserved |
| 313 |
* @toa_offset: Artificial addition [pSec] for the ToA - to be used for debug |
| 314 |
* purposes, simulating station movement by adding various values |
| 315 |
* to this field |
| 316 |
* @common_calib: XVT: common calibration value |
| 317 |
* @specific_calib: XVT: specific calibration value |
| 318 |
* @bssid: Current AP BSSID |
| 319 |
* @r2i_ndp_params: parameters for R2I NDP. |
| 320 |
* bits 0 - 2: max number of LTF repetitions |
| 321 |
* bits 3 - 5: max number of spatial streams (supported values are < 2) |
| 322 |
* bits 6 - 7: max number of total LTFs see |
| 323 |
* &enum ieee80211_range_params_max_total_ltf |
| 324 |
* @i2r_ndp_params: parameters for I2R NDP. |
| 325 |
* bits 0 - 2: max number of LTF repetitions |
| 326 |
* bits 3 - 5: max number of spatial streams |
| 327 |
* bits 6 - 7: max number of total LTFs see |
| 328 |
* &enum ieee80211_range_params_max_total_ltf |
| 329 |
*/ |
| 330 |
struct iwl_tof_responder_config_cmd_v8 { |
| 331 |
__le32 cmd_valid_fields; |
| 332 |
__le32 responder_cfg_flags; |
| 333 |
u8 format_bw; |
| 334 |
u8 rate; |
| 335 |
u8 channel_num; |
| 336 |
u8 ctrl_ch_position; |
| 337 |
u8 sta_id; |
| 338 |
u8 reserved1; |
| 339 |
__le16 toa_offset; |
| 340 |
__le16 common_calib; |
| 341 |
__le16 specific_calib; |
| 342 |
u8 bssid[ETH_ALEN]; |
| 343 |
u8 r2i_ndp_params; |
| 344 |
u8 i2r_ndp_params; |
| 345 |
} __packed; /* TOF_RESPONDER_CONFIG_CMD_API_S_VER_8 */ |
| 346 |
|
| 347 |
/** |
| 348 |
* struct iwl_tof_responder_config_cmd_v9 - ToF AP mode (for debug) |
| 349 |
* @cmd_valid_fields: &iwl_tof_responder_cmd_valid_field |
| 350 |
* @responder_cfg_flags: &iwl_tof_responder_cfg_flags |
| 351 |
* @format_bw: bits 0 - 3: &enum iwl_location_frame_format. |
| 352 |
* bits 4 - 7: &enum iwl_location_bw. |
| 353 |
* @bss_color: current AP bss_color |
| 354 |
* @channel_num: current AP Channel |
| 355 |
* @ctrl_ch_position: coding of the control channel position relative to |
| 356 |
* the center frequency, see iwl_mvm_get_ctrl_pos() |
| 357 |
* @sta_id: index of the AP STA when in AP mode |
| 358 |
* @reserved1: reserved |
| 359 |
* @toa_offset: Artificial addition [pSec] for the ToA - to be used for debug |
| 360 |
* purposes, simulating station movement by adding various values |
| 361 |
* to this field |
| 362 |
* @common_calib: XVT: common calibration value |
| 363 |
* @specific_calib: XVT: specific calibration value |
| 364 |
* @bssid: Current AP BSSID |
| 365 |
* @r2i_ndp_params: parameters for R2I NDP. |
| 366 |
* bits 0 - 2: max number of LTF repetitions |
| 367 |
* bits 3 - 5: max number of spatial streams (supported values are < 2) |
| 368 |
* bits 6 - 7: max number of total LTFs see |
| 369 |
* &enum ieee80211_range_params_max_total_ltf |
| 370 |
* @i2r_ndp_params: parameters for I2R NDP. |
| 371 |
* bits 0 - 2: max number of LTF repetitions |
| 372 |
* bits 3 - 5: max number of spatial streams |
| 373 |
* bits 6 - 7: max number of total LTFs see |
| 374 |
* &enum ieee80211_range_params_max_total_ltf |
| 375 |
* @min_time_between_msr: for non trigger based NDP ranging, minimum time |
| 376 |
* between measurements in milliseconds. |
| 377 |
* @max_time_between_msr: for non trigger based NDP ranging, maximum time |
| 378 |
* between measurements in milliseconds. |
| 379 |
*/ |
| 380 |
struct iwl_tof_responder_config_cmd_v9 { |
| 381 |
__le32 cmd_valid_fields; |
| 382 |
__le32 responder_cfg_flags; |
| 383 |
u8 format_bw; |
| 384 |
u8 bss_color; |
| 385 |
u8 channel_num; |
| 386 |
u8 ctrl_ch_position; |
| 387 |
u8 sta_id; |
| 388 |
u8 reserved1; |
| 389 |
__le16 toa_offset; |
| 390 |
__le16 common_calib; |
| 391 |
__le16 specific_calib; |
| 392 |
u8 bssid[ETH_ALEN]; |
| 393 |
u8 r2i_ndp_params; |
| 394 |
u8 i2r_ndp_params; |
| 395 |
__le16 min_time_between_msr; |
| 396 |
__le16 max_time_between_msr; |
| 397 |
} __packed; /* TOF_RESPONDER_CONFIG_CMD_API_S_VER_8 */ |
| 398 |
|
| 399 |
/** |
| 400 |
* struct iwl_tof_responder_config_cmd - ToF AP mode |
| 401 |
* @cmd_valid_fields: &iwl_tof_responder_cmd_valid_field |
| 402 |
* @responder_cfg_flags: &iwl_tof_responder_cfg_flags |
| 403 |
* @format_bw: bits 0 - 3: &enum iwl_location_frame_format. |
| 404 |
* bits 4 - 7: &enum iwl_location_bw. |
| 405 |
* @bss_color: current AP bss_color |
| 406 |
* @channel_num: current AP Channel |
| 407 |
* @ctrl_ch_position: coding of the control channel position relative to |
| 408 |
* the center frequency, see iwl_mvm_get_ctrl_pos() |
| 409 |
* @sta_id: index of the AP STA when in AP mode |
| 410 |
* @band: current AP band |
| 411 |
* @toa_offset: Artificial addition [pSec] for the ToA - to be used for debug |
| 412 |
* purposes, simulating station movement by adding various values |
| 413 |
* to this field |
| 414 |
* @common_calib: XVT: common calibration value |
| 415 |
* @specific_calib: XVT: specific calibration value |
| 416 |
* @bssid: Current AP BSSID |
| 417 |
* @r2i_ndp_params: parameters for R2I NDP. |
| 418 |
* bits 0 - 2: max number of LTF repetitions |
| 419 |
* bits 3 - 5: max number of spatial streams (supported values are < 2) |
| 420 |
* bits 6 - 7: max number of total LTFs see |
| 421 |
* &enum ieee80211_range_params_max_total_ltf |
| 422 |
* @i2r_ndp_params: parameters for I2R NDP. |
| 423 |
* bits 0 - 2: max number of LTF repetitions |
| 424 |
* bits 3 - 5: max number of spatial streams |
| 425 |
* bits 6 - 7: max number of total LTFs see |
| 426 |
* &enum ieee80211_range_params_max_total_ltf |
| 427 |
* @min_time_between_msr: for non trigger based NDP ranging, minimum time |
| 428 |
* between measurements in milliseconds. |
| 429 |
* @max_time_between_msr: for non trigger based NDP ranging, maximum time |
| 430 |
* between measurements in milliseconds. |
| 431 |
*/ |
| 432 |
struct iwl_tof_responder_config_cmd { |
| 433 |
__le32 cmd_valid_fields; |
| 434 |
__le32 responder_cfg_flags; |
| 435 |
u8 format_bw; |
| 436 |
u8 bss_color; |
| 437 |
u8 channel_num; |
| 438 |
u8 ctrl_ch_position; |
| 439 |
u8 sta_id; |
| 440 |
u8 band; |
| 441 |
__le16 toa_offset; |
| 442 |
__le16 common_calib; |
| 443 |
__le16 specific_calib; |
| 444 |
u8 bssid[ETH_ALEN]; |
| 445 |
u8 r2i_ndp_params; |
| 446 |
u8 i2r_ndp_params; |
| 447 |
__le16 min_time_between_msr; |
| 448 |
__le16 max_time_between_msr; |
| 449 |
} __packed; /* TOF_RESPONDER_CONFIG_CMD_API_S_VER_10 */ |
| 450 |
|
| 451 |
#define IWL_LCI_CIVIC_IE_MAX_SIZE 400 |
| 452 |
|
| 453 |
/** |
| 454 |
* struct iwl_tof_responder_dyn_config_cmd_v2 - Dynamic responder settings |
| 455 |
* @lci_len: The length of the 1st (LCI) part in the @lci_civic buffer |
| 456 |
* @civic_len: The length of the 2nd (CIVIC) part in the @lci_civic buffer |
| 457 |
* @lci_civic: The LCI/CIVIC buffer. LCI data (if exists) comes first, then, if |
| 458 |
* needed, 0-padding such that the next part is dword-aligned, then CIVIC |
| 459 |
* data (if exists) follows, and then 0-padding again to complete a |
| 460 |
* 4-multiple long buffer. |
| 461 |
*/ |
| 462 |
struct iwl_tof_responder_dyn_config_cmd_v2 { |
| 463 |
__le32 lci_len; |
| 464 |
__le32 civic_len; |
| 465 |
u8 lci_civic[]; |
| 466 |
} __packed; /* TOF_RESPONDER_DYN_CONFIG_CMD_API_S_VER_2 */ |
| 467 |
|
| 468 |
#define IWL_LCI_MAX_SIZE 160 |
| 469 |
#define IWL_CIVIC_MAX_SIZE 160 |
| 470 |
#define HLTK_11AZ_LEN 32 |
| 471 |
|
| 472 |
/** |
| 473 |
* enum iwl_responder_dyn_cfg_valid_flags - valid flags for dyn_config_cmd |
| 474 |
* @IWL_RESPONDER_DYN_CFG_VALID_LCI: LCI data is valid |
| 475 |
* @IWL_RESPONDER_DYN_CFG_VALID_CIVIC: Civic data is valid |
| 476 |
* @IWL_RESPONDER_DYN_CFG_VALID_PASN_STA: the pasn_addr, HLTK and cipher fields |
| 477 |
* are valid. |
| 478 |
*/ |
| 479 |
enum iwl_responder_dyn_cfg_valid_flags { |
| 480 |
IWL_RESPONDER_DYN_CFG_VALID_LCI = BIT(0), |
| 481 |
IWL_RESPONDER_DYN_CFG_VALID_CIVIC = BIT(1), |
| 482 |
IWL_RESPONDER_DYN_CFG_VALID_PASN_STA = BIT(2), |
| 483 |
}; |
| 484 |
|
| 485 |
/** |
| 486 |
* struct iwl_tof_responder_dyn_config_cmd - Dynamic responder settings |
| 487 |
* @cipher: The negotiated cipher. see &enum iwl_location_cipher. |
| 488 |
* @valid_flags: flags indicating which fields in the command are valid. see |
| 489 |
* &enum iwl_responder_dyn_cfg_valid_flags. |
| 490 |
* @lci_len: length of the LCI data in bytes |
| 491 |
* @civic_len: length of the Civic data in bytes |
| 492 |
* @lci_buf: the LCI buffer |
| 493 |
* @civic_buf: the Civic buffer |
| 494 |
* @hltk_buf: HLTK for secure LTF bits generation for the specified station |
| 495 |
* @addr: mac address of the station for which to use the HLTK |
| 496 |
* @reserved: for alignment |
| 497 |
*/ |
| 498 |
struct iwl_tof_responder_dyn_config_cmd { |
| 499 |
u8 cipher; |
| 500 |
u8 valid_flags; |
| 501 |
u8 lci_len; |
| 502 |
u8 civic_len; |
| 503 |
u8 lci_buf[IWL_LCI_MAX_SIZE]; |
| 504 |
u8 civic_buf[IWL_LCI_MAX_SIZE]; |
| 505 |
u8 hltk_buf[HLTK_11AZ_LEN]; |
| 506 |
u8 addr[ETH_ALEN]; |
| 507 |
u8 reserved[2]; |
| 508 |
} __packed; /* TOF_RESPONDER_DYN_CONFIG_CMD_API_S_VER_3 */ |
| 509 |
|
| 510 |
/** |
| 511 |
* struct iwl_tof_range_req_ext_cmd - extended range req for WLS |
| 512 |
* @tsf_timer_offset_msec: the recommended time offset (mSec) from the AP's TSF |
| 513 |
* @reserved: reserved |
| 514 |
* @min_delta_ftm: Minimal time between two consecutive measurements, |
| 515 |
* in units of 100us. 0 means no preference by station |
| 516 |
* @ftm_format_and_bw20M: FTM Channel Spacing/Format for 20MHz: recommended |
| 517 |
* value be sent to the AP |
| 518 |
* @ftm_format_and_bw40M: FTM Channel Spacing/Format for 40MHz: recommended |
| 519 |
* value to be sent to the AP |
| 520 |
* @ftm_format_and_bw80M: FTM Channel Spacing/Format for 80MHz: recommended |
| 521 |
* value to be sent to the AP |
| 522 |
*/ |
| 523 |
struct iwl_tof_range_req_ext_cmd { |
| 524 |
__le16 tsf_timer_offset_msec; |
| 525 |
__le16 reserved; |
| 526 |
u8 min_delta_ftm; |
| 527 |
u8 ftm_format_and_bw20M; |
| 528 |
u8 ftm_format_and_bw40M; |
| 529 |
u8 ftm_format_and_bw80M; |
| 530 |
} __packed; |
| 531 |
|
| 532 |
/** |
| 533 |
* enum iwl_tof_location_query - values for query bitmap |
| 534 |
* @IWL_TOF_LOC_LCI: query LCI |
| 535 |
* @IWL_TOF_LOC_CIVIC: query civic |
| 536 |
*/ |
| 537 |
enum iwl_tof_location_query { |
| 538 |
IWL_TOF_LOC_LCI = 0x01, |
| 539 |
IWL_TOF_LOC_CIVIC = 0x02, |
| 540 |
}; |
| 541 |
|
| 542 |
/** |
| 543 |
* struct iwl_tof_range_req_ap_entry_v2 - AP configuration parameters |
| 544 |
* @channel_num: Current AP Channel |
| 545 |
* @bandwidth: Current AP Bandwidth. One of iwl_tof_bandwidth. |
| 546 |
* @tsf_delta_direction: TSF relatively to the subject AP |
| 547 |
* @ctrl_ch_position: Coding of the control channel position relative to the |
| 548 |
* center frequency, see iwl_mvm_get_ctrl_pos(). |
| 549 |
* @bssid: AP's BSSID |
| 550 |
* @measure_type: Measurement type: 0 - two sided, 1 - One sided |
| 551 |
* @num_of_bursts: Recommended value to be sent to the AP. 2s Exponent of the |
| 552 |
* number of measurement iterations (min 2^0 = 1, max 2^14) |
| 553 |
* @burst_period: Recommended value to be sent to the AP. Measurement |
| 554 |
* periodicity In units of 100ms. ignored if num_of_bursts = 0 |
| 555 |
* @samples_per_burst: 2-sided: the number of FTMs pairs in single Burst (1-31); |
| 556 |
* 1-sided: how many rts/cts pairs should be used per burst. |
| 557 |
* @retries_per_sample: Max number of retries that the LMAC should send |
| 558 |
* in case of no replies by the AP. |
| 559 |
* @tsf_delta: TSF Delta in units of microseconds. |
| 560 |
* The difference between the AP TSF and the device local clock. |
| 561 |
* @location_req: Location Request Bit[0] LCI should be sent in the FTMR; |
| 562 |
* Bit[1] Civic should be sent in the FTMR |
| 563 |
* @asap_mode: 0 - non asap mode, 1 - asap mode (not relevant for one sided) |
| 564 |
* @enable_dyn_ack: Enable Dynamic ACK BW. |
| 565 |
* 0: Initiator interact with regular AP; |
| 566 |
* 1: Initiator interact with Responder machine: need to send the |
| 567 |
* Initiator Acks with HT 40MHz / 80MHz, since the Responder should |
| 568 |
* use it for its ch est measurement (this flag will be set when we |
| 569 |
* configure the opposite machine to be Responder). |
| 570 |
* @rssi: Last received value |
| 571 |
* legal values: -128-0 (0x7f). above 0x0 indicating an invalid value. |
| 572 |
* @algo_type: &enum iwl_tof_algo_type |
| 573 |
* @notify_mcsi: &enum iwl_tof_mcsi_ntfy. |
| 574 |
* @reserved: For alignment and future use |
| 575 |
*/ |
| 576 |
struct iwl_tof_range_req_ap_entry_v2 { |
| 577 |
u8 channel_num; |
| 578 |
u8 bandwidth; |
| 579 |
u8 tsf_delta_direction; |
| 580 |
u8 ctrl_ch_position; |
| 581 |
u8 bssid[ETH_ALEN]; |
| 582 |
u8 measure_type; |
| 583 |
u8 num_of_bursts; |
| 584 |
__le16 burst_period; |
| 585 |
u8 samples_per_burst; |
| 586 |
u8 retries_per_sample; |
| 587 |
__le32 tsf_delta; |
| 588 |
u8 location_req; |
| 589 |
u8 asap_mode; |
| 590 |
u8 enable_dyn_ack; |
| 591 |
s8 rssi; |
| 592 |
u8 algo_type; |
| 593 |
u8 notify_mcsi; |
| 594 |
__le16 reserved; |
| 595 |
} __packed; /* LOCATION_RANGE_REQ_AP_ENTRY_CMD_API_S_VER_2 */ |
| 596 |
|
| 597 |
/** |
| 598 |
* enum iwl_initiator_ap_flags - per responder FTM configuration flags |
| 599 |
* @IWL_INITIATOR_AP_FLAGS_ASAP: Request for ASAP measurement. |
| 600 |
* @IWL_INITIATOR_AP_FLAGS_LCI_REQUEST: Request for LCI information |
| 601 |
* @IWL_INITIATOR_AP_FLAGS_CIVIC_REQUEST: Request for CIVIC information |
| 602 |
* @IWL_INITIATOR_AP_FLAGS_DYN_ACK: Send HT/VHT ack for FTM frames. If not set, |
| 603 |
* 20Mhz dup acks will be sent. |
| 604 |
* @IWL_INITIATOR_AP_FLAGS_ALGO_LR: Use LR algo type for rtt calculation. |
| 605 |
* Default algo type is ML. |
| 606 |
* @IWL_INITIATOR_AP_FLAGS_ALGO_FFT: Use FFT algo type for rtt calculation. |
| 607 |
* Default algo type is ML. |
| 608 |
* @IWL_INITIATOR_AP_FLAGS_MCSI_REPORT: Send the MCSI for each FTM frame to the |
| 609 |
* driver. |
| 610 |
* @IWL_INITIATOR_AP_FLAGS_NON_TB: Use non trigger based flow |
| 611 |
* @IWL_INITIATOR_AP_FLAGS_TB: Use trigger based flow |
| 612 |
* @IWL_INITIATOR_AP_FLAGS_SECURED: request secure LTF measurement |
| 613 |
* @IWL_INITIATOR_AP_FLAGS_LMR_FEEDBACK: Send LMR feedback |
| 614 |
* @IWL_INITIATOR_AP_FLAGS_USE_CALIB: Use calibration values from the request |
| 615 |
* instead of fw internal values. |
| 616 |
* @IWL_INITIATOR_AP_FLAGS_PMF: request to protect the negotiation and LMR |
| 617 |
* frames with protected management frames. |
| 618 |
* @IWL_INITIATOR_AP_FLAGS_TERMINATE_ON_LMR_FEEDBACK: terminate the session if |
| 619 |
* the responder asked for LMR feedback although the initiator did not set |
| 620 |
* the LMR feedback bit in the FTM request. If not set, the initiator will |
| 621 |
* continue with the session and will provide the LMR feedback. |
| 622 |
* @IWL_INITIATOR_AP_FLAGS_TEST_INCORRECT_SAC: send an incorrect SAC in the |
| 623 |
* first NDP exchange. This is used for testing. |
| 624 |
* @IWL_INITIATOR_AP_FLAGS_TEST_BAD_SLTF: use incorrect secure LTF tx key. This |
| 625 |
* is used for testing. Only supported from version 15 of the range request |
| 626 |
* command. |
| 627 |
*/ |
| 628 |
enum iwl_initiator_ap_flags { |
| 629 |
IWL_INITIATOR_AP_FLAGS_ASAP = BIT(1), |
| 630 |
IWL_INITIATOR_AP_FLAGS_LCI_REQUEST = BIT(2), |
| 631 |
IWL_INITIATOR_AP_FLAGS_CIVIC_REQUEST = BIT(3), |
| 632 |
IWL_INITIATOR_AP_FLAGS_DYN_ACK = BIT(4), |
| 633 |
IWL_INITIATOR_AP_FLAGS_ALGO_LR = BIT(5), |
| 634 |
IWL_INITIATOR_AP_FLAGS_ALGO_FFT = BIT(6), |
| 635 |
IWL_INITIATOR_AP_FLAGS_MCSI_REPORT = BIT(8), |
| 636 |
IWL_INITIATOR_AP_FLAGS_NON_TB = BIT(9), |
| 637 |
IWL_INITIATOR_AP_FLAGS_TB = BIT(10), |
| 638 |
IWL_INITIATOR_AP_FLAGS_SECURED = BIT(11), |
| 639 |
IWL_INITIATOR_AP_FLAGS_LMR_FEEDBACK = BIT(12), |
| 640 |
IWL_INITIATOR_AP_FLAGS_USE_CALIB = BIT(13), |
| 641 |
IWL_INITIATOR_AP_FLAGS_PMF = BIT(14), |
| 642 |
IWL_INITIATOR_AP_FLAGS_TERMINATE_ON_LMR_FEEDBACK = BIT(15), |
| 643 |
IWL_INITIATOR_AP_FLAGS_TEST_INCORRECT_SAC = BIT(16), |
| 644 |
IWL_INITIATOR_AP_FLAGS_TEST_BAD_SLTF = BIT(17), |
| 645 |
}; |
| 646 |
|
| 647 |
/** |
| 648 |
* struct iwl_tof_range_req_ap_entry_v3 - AP configuration parameters |
| 649 |
* @initiator_ap_flags: see &enum iwl_initiator_ap_flags. |
| 650 |
* @channel_num: AP Channel number |
| 651 |
* @bandwidth: AP bandwidth. One of iwl_tof_bandwidth. |
| 652 |
* @ctrl_ch_position: Coding of the control channel position relative to the |
| 653 |
* center frequency, see iwl_mvm_get_ctrl_pos(). |
| 654 |
* @ftmr_max_retries: Max number of retries to send the FTMR in case of no |
| 655 |
* reply from the AP. |
| 656 |
* @bssid: AP's BSSID |
| 657 |
* @burst_period: Recommended value to be sent to the AP. Measurement |
| 658 |
* periodicity In units of 100ms. ignored if num_of_bursts_exp = 0 |
| 659 |
* @samples_per_burst: the number of FTMs pairs in single Burst (1-31); |
| 660 |
* @num_of_bursts: Recommended value to be sent to the AP. 2s Exponent of |
| 661 |
* the number of measurement iterations (min 2^0 = 1, max 2^14) |
| 662 |
* @reserved: For alignment and future use |
| 663 |
* @tsf_delta: not in use |
| 664 |
*/ |
| 665 |
struct iwl_tof_range_req_ap_entry_v3 { |
| 666 |
__le32 initiator_ap_flags; |
| 667 |
u8 channel_num; |
| 668 |
u8 bandwidth; |
| 669 |
u8 ctrl_ch_position; |
| 670 |
u8 ftmr_max_retries; |
| 671 |
u8 bssid[ETH_ALEN]; |
| 672 |
__le16 burst_period; |
| 673 |
u8 samples_per_burst; |
| 674 |
u8 num_of_bursts; |
| 675 |
__le16 reserved; |
| 676 |
__le32 tsf_delta; |
| 677 |
} __packed; /* LOCATION_RANGE_REQ_AP_ENTRY_CMD_API_S_VER_3 */ |
| 678 |
|
| 679 |
/** |
| 680 |
* enum iwl_location_frame_format - location frame formats |
| 681 |
* @IWL_LOCATION_FRAME_FORMAT_LEGACY: legacy |
| 682 |
* @IWL_LOCATION_FRAME_FORMAT_HT: HT |
| 683 |
* @IWL_LOCATION_FRAME_FORMAT_VHT: VHT |
| 684 |
* @IWL_LOCATION_FRAME_FORMAT_HE: HE |
| 685 |
*/ |
| 686 |
enum iwl_location_frame_format { |
| 687 |
IWL_LOCATION_FRAME_FORMAT_LEGACY, |
| 688 |
IWL_LOCATION_FRAME_FORMAT_HT, |
| 689 |
IWL_LOCATION_FRAME_FORMAT_VHT, |
| 690 |
IWL_LOCATION_FRAME_FORMAT_HE, |
| 691 |
}; |
| 692 |
|
| 693 |
/** |
| 694 |
* enum iwl_location_bw - location bandwidth selection |
| 695 |
* @IWL_LOCATION_BW_20MHZ: 20MHz |
| 696 |
* @IWL_LOCATION_BW_40MHZ: 40MHz |
| 697 |
* @IWL_LOCATION_BW_80MHZ: 80MHz |
| 698 |
* @IWL_LOCATION_BW_160MHZ: 160MHz |
| 699 |
*/ |
| 700 |
enum iwl_location_bw { |
| 701 |
IWL_LOCATION_BW_20MHZ, |
| 702 |
IWL_LOCATION_BW_40MHZ, |
| 703 |
IWL_LOCATION_BW_80MHZ, |
| 704 |
IWL_LOCATION_BW_160MHZ, |
| 705 |
}; |
| 706 |
|
| 707 |
#define TK_11AZ_LEN 32 |
| 708 |
|
| 709 |
#define LOCATION_BW_POS 4 |
| 710 |
|
| 711 |
/** |
| 712 |
* struct iwl_tof_range_req_ap_entry_v4 - AP configuration parameters |
| 713 |
* @initiator_ap_flags: see &enum iwl_initiator_ap_flags. |
| 714 |
* @channel_num: AP Channel number |
| 715 |
* @format_bw: bits 0 - 3: &enum iwl_location_frame_format. |
| 716 |
* bits 4 - 7: &enum iwl_location_bw. |
| 717 |
* @ctrl_ch_position: Coding of the control channel position relative to the |
| 718 |
* center frequency, see iwl_mvm_get_ctrl_pos(). |
| 719 |
* @ftmr_max_retries: Max number of retries to send the FTMR in case of no |
| 720 |
* reply from the AP. |
| 721 |
* @bssid: AP's BSSID |
| 722 |
* @burst_period: Recommended value to be sent to the AP. Measurement |
| 723 |
* periodicity In units of 100ms. ignored if num_of_bursts_exp = 0 |
| 724 |
* @samples_per_burst: the number of FTMs pairs in single Burst (1-31); |
| 725 |
* @num_of_bursts: Recommended value to be sent to the AP. 2s Exponent of |
| 726 |
* the number of measurement iterations (min 2^0 = 1, max 2^14) |
| 727 |
* @reserved: For alignment and future use |
| 728 |
* @hltk: HLTK to be used for secured 11az measurement |
| 729 |
* @tk: TK to be used for secured 11az measurement |
| 730 |
*/ |
| 731 |
struct iwl_tof_range_req_ap_entry_v4 { |
| 732 |
__le32 initiator_ap_flags; |
| 733 |
u8 channel_num; |
| 734 |
u8 format_bw; |
| 735 |
u8 ctrl_ch_position; |
| 736 |
u8 ftmr_max_retries; |
| 737 |
u8 bssid[ETH_ALEN]; |
| 738 |
__le16 burst_period; |
| 739 |
u8 samples_per_burst; |
| 740 |
u8 num_of_bursts; |
| 741 |
__le16 reserved; |
| 742 |
u8 hltk[HLTK_11AZ_LEN]; |
| 743 |
u8 tk[TK_11AZ_LEN]; |
| 744 |
} __packed; /* LOCATION_RANGE_REQ_AP_ENTRY_CMD_API_S_VER_4 */ |
| 745 |
|
| 746 |
/** |
| 747 |
* enum iwl_location_cipher - location cipher selection |
| 748 |
* @IWL_LOCATION_CIPHER_CCMP_128: CCMP 128 |
| 749 |
* @IWL_LOCATION_CIPHER_GCMP_128: GCMP 128 |
| 750 |
* @IWL_LOCATION_CIPHER_GCMP_256: GCMP 256 |
| 751 |
* @IWL_LOCATION_CIPHER_INVALID: security is not used. |
| 752 |
* @IWL_LOCATION_CIPHER_MAX: maximum value for this enum. |
| 753 |
*/ |
| 754 |
enum iwl_location_cipher { |
| 755 |
IWL_LOCATION_CIPHER_CCMP_128, |
| 756 |
IWL_LOCATION_CIPHER_GCMP_128, |
| 757 |
IWL_LOCATION_CIPHER_GCMP_256, |
| 758 |
IWL_LOCATION_CIPHER_INVALID, |
| 759 |
IWL_LOCATION_CIPHER_MAX, |
| 760 |
}; |
| 761 |
|
| 762 |
/** |
| 763 |
* struct iwl_tof_range_req_ap_entry_v6 - AP configuration parameters |
| 764 |
* @initiator_ap_flags: see &enum iwl_initiator_ap_flags. |
| 765 |
* @channel_num: AP Channel number |
| 766 |
* @format_bw: bits 0 - 3: &enum iwl_location_frame_format. |
| 767 |
* bits 4 - 7: &enum iwl_location_bw. |
| 768 |
* @ctrl_ch_position: Coding of the control channel position relative to the |
| 769 |
* center frequency, see iwl_mvm_get_ctrl_pos(). |
| 770 |
* @ftmr_max_retries: Max number of retries to send the FTMR in case of no |
| 771 |
* reply from the AP. |
| 772 |
* @bssid: AP's BSSID |
| 773 |
* @burst_period: Recommended value to be sent to the AP. Measurement |
| 774 |
* periodicity In units of 100ms. ignored if num_of_bursts_exp = 0 |
| 775 |
* @samples_per_burst: the number of FTMs pairs in single Burst (1-31); |
| 776 |
* @num_of_bursts: Recommended value to be sent to the AP. 2s Exponent of |
| 777 |
* the number of measurement iterations (min 2^0 = 1, max 2^14) |
| 778 |
* @sta_id: the station id of the AP. Only relevant when associated to the AP, |
| 779 |
* otherwise should be set to &IWL_INVALID_STA. |
| 780 |
* @cipher: pairwise cipher suite for secured measurement. |
| 781 |
* &enum iwl_location_cipher. |
| 782 |
* @hltk: HLTK to be used for secured 11az measurement |
| 783 |
* @tk: TK to be used for secured 11az measurement |
| 784 |
* @calib: An array of calibration values per FTM rx bandwidth. |
| 785 |
* If &IWL_INITIATOR_AP_FLAGS_USE_CALIB is set, the fw will use the |
| 786 |
* calibration value that corresponds to the rx bandwidth of the FTM |
| 787 |
* frame. |
| 788 |
* @beacon_interval: beacon interval of the AP in TUs. Only required if |
| 789 |
* &IWL_INITIATOR_AP_FLAGS_TB is set. |
| 790 |
*/ |
| 791 |
struct iwl_tof_range_req_ap_entry_v6 { |
| 792 |
__le32 initiator_ap_flags; |
| 793 |
u8 channel_num; |
| 794 |
u8 format_bw; |
| 795 |
u8 ctrl_ch_position; |
| 796 |
u8 ftmr_max_retries; |
| 797 |
u8 bssid[ETH_ALEN]; |
| 798 |
__le16 burst_period; |
| 799 |
u8 samples_per_burst; |
| 800 |
u8 num_of_bursts; |
| 801 |
u8 sta_id; |
| 802 |
u8 cipher; |
| 803 |
u8 hltk[HLTK_11AZ_LEN]; |
| 804 |
u8 tk[TK_11AZ_LEN]; |
| 805 |
__le16 calib[IWL_TOF_BW_NUM]; |
| 806 |
__le16 beacon_interval; |
| 807 |
} __packed; /* LOCATION_RANGE_REQ_AP_ENTRY_CMD_API_S_VER_6 */ |
| 808 |
|
| 809 |
/** |
| 810 |
* struct iwl_tof_range_req_ap_entry_v7 - AP configuration parameters |
| 811 |
* @initiator_ap_flags: see &enum iwl_initiator_ap_flags. |
| 812 |
* @channel_num: AP Channel number |
| 813 |
* @format_bw: bits 0 - 3: &enum iwl_location_frame_format. |
| 814 |
* bits 4 - 7: &enum iwl_location_bw. |
| 815 |
* @ctrl_ch_position: Coding of the control channel position relative to the |
| 816 |
* center frequency, see iwl_mvm_get_ctrl_pos(). |
| 817 |
* @ftmr_max_retries: Max number of retries to send the FTMR in case of no |
| 818 |
* reply from the AP. |
| 819 |
* @bssid: AP's BSSID |
| 820 |
* @burst_period: Recommended value to be sent to the AP. Measurement |
| 821 |
* periodicity In units of 100ms. ignored if num_of_bursts_exp = 0 |
| 822 |
* @samples_per_burst: the number of FTMs pairs in single Burst (1-31); |
| 823 |
* @num_of_bursts: Recommended value to be sent to the AP. 2s Exponent of |
| 824 |
* the number of measurement iterations (min 2^0 = 1, max 2^14) |
| 825 |
* @sta_id: the station id of the AP. Only relevant when associated to the AP, |
| 826 |
* otherwise should be set to &IWL_INVALID_STA. |
| 827 |
* @cipher: pairwise cipher suite for secured measurement. |
| 828 |
* &enum iwl_location_cipher. |
| 829 |
* @hltk: HLTK to be used for secured 11az measurement |
| 830 |
* @tk: TK to be used for secured 11az measurement |
| 831 |
* @calib: An array of calibration values per FTM rx bandwidth. |
| 832 |
* If &IWL_INITIATOR_AP_FLAGS_USE_CALIB is set, the fw will use the |
| 833 |
* calibration value that corresponds to the rx bandwidth of the FTM |
| 834 |
* frame. |
| 835 |
* @beacon_interval: beacon interval of the AP in TUs. Only required if |
| 836 |
* &IWL_INITIATOR_AP_FLAGS_TB is set. |
| 837 |
* @rx_pn: the next expected PN for protected management frames Rx. LE byte |
| 838 |
* order. Only valid if &IWL_INITIATOR_AP_FLAGS_SECURED is set and sta_id |
| 839 |
* is set to &IWL_INVALID_STA. |
| 840 |
* @tx_pn: the next PN to use for protected management frames Tx. LE byte |
| 841 |
* order. Only valid if &IWL_INITIATOR_AP_FLAGS_SECURED is set and sta_id |
| 842 |
* is set to &IWL_INVALID_STA. |
| 843 |
*/ |
| 844 |
struct iwl_tof_range_req_ap_entry_v7 { |
| 845 |
__le32 initiator_ap_flags; |
| 846 |
u8 channel_num; |
| 847 |
u8 format_bw; |
| 848 |
u8 ctrl_ch_position; |
| 849 |
u8 ftmr_max_retries; |
| 850 |
u8 bssid[ETH_ALEN]; |
| 851 |
__le16 burst_period; |
| 852 |
u8 samples_per_burst; |
| 853 |
u8 num_of_bursts; |
| 854 |
u8 sta_id; |
| 855 |
u8 cipher; |
| 856 |
u8 hltk[HLTK_11AZ_LEN]; |
| 857 |
u8 tk[TK_11AZ_LEN]; |
| 858 |
__le16 calib[IWL_TOF_BW_NUM]; |
| 859 |
__le16 beacon_interval; |
| 860 |
u8 rx_pn[IEEE80211_CCMP_PN_LEN]; |
| 861 |
u8 tx_pn[IEEE80211_CCMP_PN_LEN]; |
| 862 |
} __packed; /* LOCATION_RANGE_REQ_AP_ENTRY_CMD_API_S_VER_7 */ |
| 863 |
|
| 864 |
#define IWL_LOCATION_MAX_STS_POS 3 |
| 865 |
#define IWL_LOCATION_TOTAL_LTF_POS 6 |
| 866 |
|
| 867 |
/** |
| 868 |
* struct iwl_tof_range_req_ap_entry_v8 - AP configuration parameters |
| 869 |
* @initiator_ap_flags: see &enum iwl_initiator_ap_flags. |
| 870 |
* @channel_num: AP Channel number |
| 871 |
* @format_bw: bits 0 - 3: &enum iwl_location_frame_format. |
| 872 |
* bits 4 - 7: &enum iwl_location_bw. |
| 873 |
* @ctrl_ch_position: Coding of the control channel position relative to the |
| 874 |
* center frequency, see iwl_mvm_get_ctrl_pos(). |
| 875 |
* @ftmr_max_retries: Max number of retries to send the FTMR in case of no |
| 876 |
* reply from the AP. |
| 877 |
* @bssid: AP's BSSID |
| 878 |
* @burst_period: Recommended value to be sent to the AP. Measurement |
| 879 |
* periodicity In units of 100ms. ignored if num_of_bursts_exp = 0 |
| 880 |
* @samples_per_burst: the number of FTMs pairs in single Burst (1-31); |
| 881 |
* @num_of_bursts: Recommended value to be sent to the AP. 2s Exponent of |
| 882 |
* the number of measurement iterations (min 2^0 = 1, max 2^14) |
| 883 |
* @sta_id: the station id of the AP. Only relevant when associated to the AP, |
| 884 |
* otherwise should be set to &IWL_INVALID_STA. |
| 885 |
* @cipher: pairwise cipher suite for secured measurement. |
| 886 |
* &enum iwl_location_cipher. |
| 887 |
* @hltk: HLTK to be used for secured 11az measurement |
| 888 |
* @tk: TK to be used for secured 11az measurement |
| 889 |
* @calib: An array of calibration values per FTM rx bandwidth. |
| 890 |
* If &IWL_INITIATOR_AP_FLAGS_USE_CALIB is set, the fw will use the |
| 891 |
* calibration value that corresponds to the rx bandwidth of the FTM |
| 892 |
* frame. |
| 893 |
* @beacon_interval: beacon interval of the AP in TUs. Only required if |
| 894 |
* &IWL_INITIATOR_AP_FLAGS_TB is set. |
| 895 |
* @rx_pn: the next expected PN for protected management frames Rx. LE byte |
| 896 |
* order. Only valid if &IWL_INITIATOR_AP_FLAGS_SECURED is set and sta_id |
| 897 |
* is set to &IWL_INVALID_STA. |
| 898 |
* @tx_pn: the next PN to use for protected management frames Tx. LE byte |
| 899 |
* order. Only valid if &IWL_INITIATOR_AP_FLAGS_SECURED is set and sta_id |
| 900 |
* is set to &IWL_INVALID_STA. |
| 901 |
* @r2i_ndp_params: parameters for R2I NDP ranging negotiation. |
| 902 |
* bits 0 - 2: max LTF repetitions |
| 903 |
* bits 3 - 5: max number of spatial streams |
| 904 |
* bits 6 - 7: reserved |
| 905 |
* @i2r_ndp_params: parameters for I2R NDP ranging negotiation. |
| 906 |
* bits 0 - 2: max LTF repetitions |
| 907 |
* bits 3 - 5: max number of spatial streams (supported values are < 2) |
| 908 |
* bits 6 - 7: reserved |
| 909 |
* @r2i_max_total_ltf: R2I Max Total LTFs for NDP ranging negotiation. |
| 910 |
* One of &enum ieee80211_range_params_max_total_ltf. |
| 911 |
* @i2r_max_total_ltf: I2R Max Total LTFs for NDP ranging negotiation. |
| 912 |
* One of &enum ieee80211_range_params_max_total_ltf. |
| 913 |
*/ |
| 914 |
struct iwl_tof_range_req_ap_entry_v8 { |
| 915 |
__le32 initiator_ap_flags; |
| 916 |
u8 channel_num; |
| 917 |
u8 format_bw; |
| 918 |
u8 ctrl_ch_position; |
| 919 |
u8 ftmr_max_retries; |
| 920 |
u8 bssid[ETH_ALEN]; |
| 921 |
__le16 burst_period; |
| 922 |
u8 samples_per_burst; |
| 923 |
u8 num_of_bursts; |
| 924 |
u8 sta_id; |
| 925 |
u8 cipher; |
| 926 |
u8 hltk[HLTK_11AZ_LEN]; |
| 927 |
u8 tk[TK_11AZ_LEN]; |
| 928 |
__le16 calib[IWL_TOF_BW_NUM]; |
| 929 |
__le16 beacon_interval; |
| 930 |
u8 rx_pn[IEEE80211_CCMP_PN_LEN]; |
| 931 |
u8 tx_pn[IEEE80211_CCMP_PN_LEN]; |
| 932 |
u8 r2i_ndp_params; |
| 933 |
u8 i2r_ndp_params; |
| 934 |
u8 r2i_max_total_ltf; |
| 935 |
u8 i2r_max_total_ltf; |
| 936 |
} __packed; /* LOCATION_RANGE_REQ_AP_ENTRY_CMD_API_S_VER_8 */ |
| 937 |
|
| 938 |
/** |
| 939 |
* struct iwl_tof_range_req_ap_entry_v9 - AP configuration parameters |
| 940 |
* @initiator_ap_flags: see &enum iwl_initiator_ap_flags. |
| 941 |
* @channel_num: AP Channel number |
| 942 |
* @format_bw: bits 0 - 3: &enum iwl_location_frame_format. |
| 943 |
* bits 4 - 7: &enum iwl_location_bw. |
| 944 |
* @ctrl_ch_position: Coding of the control channel position relative to the |
| 945 |
* center frequency, see iwl_mvm_get_ctrl_pos(). |
| 946 |
* @ftmr_max_retries: Max number of retries to send the FTMR in case of no |
| 947 |
* reply from the AP. |
| 948 |
* @bssid: AP's BSSID |
| 949 |
* @burst_period: For EDCA based ranging: Recommended value to be sent to the |
| 950 |
* AP. Measurement periodicity In units of 100ms. ignored if |
| 951 |
* num_of_bursts_exp = 0. |
| 952 |
* For non trigger based NDP ranging, the maximum time between |
| 953 |
* measurements in units of milliseconds. |
| 954 |
* @samples_per_burst: the number of FTMs pairs in single Burst (1-31); |
| 955 |
* @num_of_bursts: Recommended value to be sent to the AP. 2s Exponent of |
| 956 |
* the number of measurement iterations (min 2^0 = 1, max 2^14) |
| 957 |
* @sta_id: the station id of the AP. Only relevant when associated to the AP, |
| 958 |
* otherwise should be set to &IWL_INVALID_STA. |
| 959 |
* @cipher: pairwise cipher suite for secured measurement. |
| 960 |
* &enum iwl_location_cipher. |
| 961 |
* @hltk: HLTK to be used for secured 11az measurement |
| 962 |
* @tk: TK to be used for secured 11az measurement |
| 963 |
* @calib: An array of calibration values per FTM rx bandwidth. |
| 964 |
* If &IWL_INITIATOR_AP_FLAGS_USE_CALIB is set, the fw will use the |
| 965 |
* calibration value that corresponds to the rx bandwidth of the FTM |
| 966 |
* frame. |
| 967 |
* @beacon_interval: beacon interval of the AP in TUs. Only required if |
| 968 |
* &IWL_INITIATOR_AP_FLAGS_TB is set. |
| 969 |
* @bss_color: the BSS color of the responder. Only valid if |
| 970 |
* &IWL_INITIATOR_AP_FLAGS_TB or &IWL_INITIATOR_AP_FLAGS_NON_TB is set. |
| 971 |
* @rx_pn: the next expected PN for protected management frames Rx. LE byte |
| 972 |
* order. Only valid if &IWL_INITIATOR_AP_FLAGS_SECURED is set and sta_id |
| 973 |
* is set to &IWL_INVALID_STA. |
| 974 |
* @tx_pn: the next PN to use for protected management frames Tx. LE byte |
| 975 |
* order. Only valid if &IWL_INITIATOR_AP_FLAGS_SECURED is set and sta_id |
| 976 |
* is set to &IWL_INVALID_STA. |
| 977 |
* @r2i_ndp_params: parameters for R2I NDP ranging negotiation. |
| 978 |
* bits 0 - 2: max LTF repetitions |
| 979 |
* bits 3 - 5: max number of spatial streams |
| 980 |
* bits 6 - 7: reserved |
| 981 |
* @i2r_ndp_params: parameters for I2R NDP ranging negotiation. |
| 982 |
* bits 0 - 2: max LTF repetitions |
| 983 |
* bits 3 - 5: max number of spatial streams (supported values are < 2) |
| 984 |
* bits 6 - 7: reserved |
| 985 |
* @r2i_max_total_ltf: R2I Max Total LTFs for NDP ranging negotiation. |
| 986 |
* One of &enum ieee80211_range_params_max_total_ltf. |
| 987 |
* @i2r_max_total_ltf: I2R Max Total LTFs for NDP ranging negotiation. |
| 988 |
* One of &enum ieee80211_range_params_max_total_ltf. |
| 989 |
* @bss_color: the BSS color of the responder. Only valid if |
| 990 |
* &IWL_INITIATOR_AP_FLAGS_NON_TB or &IWL_INITIATOR_AP_FLAGS_TB is set. |
| 991 |
* @band: 0 for 5.2 GHz, 1 for 2.4 GHz, 2 for 6GHz |
| 992 |
* @min_time_between_msr: For non trigger based NDP ranging, the minimum time |
| 993 |
* between measurements in units of milliseconds |
| 994 |
*/ |
| 995 |
struct iwl_tof_range_req_ap_entry_v9 { |
| 996 |
__le32 initiator_ap_flags; |
| 997 |
u8 channel_num; |
| 998 |
u8 format_bw; |
| 999 |
u8 ctrl_ch_position; |
| 1000 |
u8 ftmr_max_retries; |
| 1001 |
u8 bssid[ETH_ALEN]; |
| 1002 |
__le16 burst_period; |
| 1003 |
u8 samples_per_burst; |
| 1004 |
u8 num_of_bursts; |
| 1005 |
u8 sta_id; |
| 1006 |
u8 cipher; |
| 1007 |
u8 hltk[HLTK_11AZ_LEN]; |
| 1008 |
u8 tk[TK_11AZ_LEN]; |
| 1009 |
__le16 calib[IWL_TOF_BW_NUM]; |
| 1010 |
u16 beacon_interval; |
| 1011 |
u8 rx_pn[IEEE80211_CCMP_PN_LEN]; |
| 1012 |
u8 tx_pn[IEEE80211_CCMP_PN_LEN]; |
| 1013 |
u8 r2i_ndp_params; |
| 1014 |
u8 i2r_ndp_params; |
| 1015 |
u8 r2i_max_total_ltf; |
| 1016 |
u8 i2r_max_total_ltf; |
| 1017 |
u8 bss_color; |
| 1018 |
u8 band; |
| 1019 |
__le16 min_time_between_msr; |
| 1020 |
} __packed; /* LOCATION_RANGE_REQ_AP_ENTRY_CMD_API_S_VER_9 */ |
| 1021 |
|
| 1022 |
/** |
| 1023 |
* struct iwl_tof_range_req_ap_entry - AP configuration parameters |
| 1024 |
* @initiator_ap_flags: see &enum iwl_initiator_ap_flags. |
| 1025 |
* @band: 0 for 5.2 GHz, 1 for 2.4 GHz, 2 for 6GHz |
| 1026 |
* @channel_num: AP Channel number |
| 1027 |
* @format_bw: bits 0 - 3: &enum iwl_location_frame_format. |
| 1028 |
* bits 4 - 7: &enum iwl_location_bw. |
| 1029 |
* @ctrl_ch_position: Coding of the control channel position relative to the |
| 1030 |
* center frequency, see iwl_mvm_get_ctrl_pos(). |
| 1031 |
* @bssid: AP's BSSID |
| 1032 |
* @burst_period: For EDCA based ranging: Recommended value to be sent to the |
| 1033 |
* AP. Measurement periodicity In units of 100ms. ignored if |
| 1034 |
* num_of_bursts_exp = 0. |
| 1035 |
* For non trigger based NDP ranging, the maximum time between |
| 1036 |
* measurements in units of milliseconds. |
| 1037 |
* @samples_per_burst: the number of FTMs pairs in single Burst (1-31); |
| 1038 |
* @num_of_bursts: Recommended value to be sent to the AP. 2s Exponent of |
| 1039 |
* the number of measurement iterations (min 2^0 = 1, max 2^14) |
| 1040 |
* @sta_id: the station id of the AP. Only relevant when associated to the AP, |
| 1041 |
* otherwise should be set to &IWL_INVALID_STA. |
| 1042 |
* @cipher: pairwise cipher suite for secured measurement. |
| 1043 |
* &enum iwl_location_cipher. |
| 1044 |
* @hltk: HLTK to be used for secured 11az measurement |
| 1045 |
* @tk: TK to be used for secured 11az measurement |
| 1046 |
* @calib: An array of calibration values per FTM rx bandwidth. |
| 1047 |
* If &IWL_INITIATOR_AP_FLAGS_USE_CALIB is set, the fw will use the |
| 1048 |
* calibration value that corresponds to the rx bandwidth of the FTM |
| 1049 |
* frame. |
| 1050 |
* @beacon_interval: beacon interval of the AP in TUs. Only required if |
| 1051 |
* &IWL_INITIATOR_AP_FLAGS_TB is set. |
| 1052 |
* @rx_pn: the next expected PN for protected management frames Rx. LE byte |
| 1053 |
* order. Only valid if &IWL_INITIATOR_AP_FLAGS_SECURED is set and sta_id |
| 1054 |
* is set to &IWL_INVALID_STA. |
| 1055 |
* @tx_pn: the next PN to use for protected management frames Tx. LE byte |
| 1056 |
* order. Only valid if &IWL_INITIATOR_AP_FLAGS_SECURED is set and sta_id |
| 1057 |
* is set to &IWL_INVALID_STA. |
| 1058 |
* @r2i_ndp_params: parameters for R2I NDP ranging negotiation. |
| 1059 |
* bits 0 - 2: max LTF repetitions |
| 1060 |
* bits 3 - 5: max number of spatial streams |
| 1061 |
* bits 6 - 7: max total LTFs. One of |
| 1062 |
* &enum ieee80211_range_params_max_total_ltf. |
| 1063 |
* @i2r_ndp_params: parameters for I2R NDP ranging negotiation. |
| 1064 |
* bits 0 - 2: max LTF repetitions |
| 1065 |
* bits 3 - 5: max number of spatial streams (supported values are < 2) |
| 1066 |
* bits 6 - 7: max total LTFs. One of |
| 1067 |
* &enum ieee80211_range_params_max_total_ltf. |
| 1068 |
* @min_time_between_msr: For non trigger based NDP ranging, the minimum time |
| 1069 |
* between measurements in units of milliseconds |
| 1070 |
*/ |
| 1071 |
struct iwl_tof_range_req_ap_entry { |
| 1072 |
__le32 initiator_ap_flags; |
| 1073 |
u8 band; |
| 1074 |
u8 channel_num; |
| 1075 |
u8 format_bw; |
| 1076 |
u8 ctrl_ch_position; |
| 1077 |
u8 bssid[ETH_ALEN]; |
| 1078 |
__le16 burst_period; |
| 1079 |
u8 samples_per_burst; |
| 1080 |
u8 num_of_bursts; |
| 1081 |
u8 sta_id; |
| 1082 |
u8 cipher; |
| 1083 |
u8 hltk[HLTK_11AZ_LEN]; |
| 1084 |
u8 tk[TK_11AZ_LEN]; |
| 1085 |
__le16 calib[IWL_TOF_BW_NUM]; |
| 1086 |
__le16 beacon_interval; |
| 1087 |
u8 rx_pn[IEEE80211_CCMP_PN_LEN]; |
| 1088 |
u8 tx_pn[IEEE80211_CCMP_PN_LEN]; |
| 1089 |
u8 r2i_ndp_params; |
| 1090 |
u8 i2r_ndp_params; |
| 1091 |
__le16 min_time_between_msr; |
| 1092 |
} __packed; /* LOCATION_RANGE_REQ_AP_ENTRY_CMD_API_S_VER_9 */ |
| 1093 |
|
| 1094 |
/** |
| 1095 |
* enum iwl_tof_response_mode - TOF response mode |
| 1096 |
* @IWL_MVM_TOF_RESPONSE_ASAP: report each AP measurement separately as soon as |
| 1097 |
* possible (not supported for this release) |
| 1098 |
* @IWL_MVM_TOF_RESPONSE_TIMEOUT: report all AP measurements as a batch upon |
| 1099 |
* timeout expiration |
| 1100 |
* @IWL_MVM_TOF_RESPONSE_COMPLETE: report all AP measurements as a batch at the |
| 1101 |
* earlier of: measurements completion / timeout |
| 1102 |
* expiration. |
| 1103 |
*/ |
| 1104 |
enum iwl_tof_response_mode { |
| 1105 |
IWL_MVM_TOF_RESPONSE_ASAP, |
| 1106 |
IWL_MVM_TOF_RESPONSE_TIMEOUT, |
| 1107 |
IWL_MVM_TOF_RESPONSE_COMPLETE, |
| 1108 |
}; |
| 1109 |
|
| 1110 |
/** |
| 1111 |
* enum iwl_tof_initiator_flags - TOF initiator flags |
| 1112 |
* |
| 1113 |
* @IWL_TOF_INITIATOR_FLAGS_FAST_ALGO_DISABLED: disable fast algo, meaning run |
| 1114 |
* the algo on ant A+B, instead of only one of them. |
| 1115 |
* @IWL_TOF_INITIATOR_FLAGS_RX_CHAIN_SEL_A: open RX antenna A for FTMs RX |
| 1116 |
* @IWL_TOF_INITIATOR_FLAGS_RX_CHAIN_SEL_B: open RX antenna B for FTMs RX |
| 1117 |
* @IWL_TOF_INITIATOR_FLAGS_RX_CHAIN_SEL_C: open RX antenna C for FTMs RX |
| 1118 |
* @IWL_TOF_INITIATOR_FLAGS_TX_CHAIN_SEL_A: use antenna A fo TX ACKs during FTM |
| 1119 |
* @IWL_TOF_INITIATOR_FLAGS_TX_CHAIN_SEL_B: use antenna B fo TX ACKs during FTM |
| 1120 |
* @IWL_TOF_INITIATOR_FLAGS_TX_CHAIN_SEL_C: use antenna C fo TX ACKs during FTM |
| 1121 |
* @IWL_TOF_INITIATOR_FLAGS_MACADDR_RANDOM: use random mac address for FTM |
| 1122 |
* @IWL_TOF_INITIATOR_FLAGS_SPECIFIC_CALIB: use the specific calib value from |
| 1123 |
* the range request command |
| 1124 |
* @IWL_TOF_INITIATOR_FLAGS_COMMON_CALIB: use the common calib value from the |
| 1125 |
* ragne request command |
| 1126 |
* @IWL_TOF_INITIATOR_FLAGS_NON_ASAP_SUPPORT: support non-asap measurements |
| 1127 |
*/ |
| 1128 |
enum iwl_tof_initiator_flags { |
| 1129 |
IWL_TOF_INITIATOR_FLAGS_FAST_ALGO_DISABLED = BIT(0), |
| 1130 |
IWL_TOF_INITIATOR_FLAGS_RX_CHAIN_SEL_A = BIT(1), |
| 1131 |
IWL_TOF_INITIATOR_FLAGS_RX_CHAIN_SEL_B = BIT(2), |
| 1132 |
IWL_TOF_INITIATOR_FLAGS_RX_CHAIN_SEL_C = BIT(3), |
| 1133 |
IWL_TOF_INITIATOR_FLAGS_TX_CHAIN_SEL_A = BIT(4), |
| 1134 |
IWL_TOF_INITIATOR_FLAGS_TX_CHAIN_SEL_B = BIT(5), |
| 1135 |
IWL_TOF_INITIATOR_FLAGS_TX_CHAIN_SEL_C = BIT(6), |
| 1136 |
IWL_TOF_INITIATOR_FLAGS_MACADDR_RANDOM = BIT(7), |
| 1137 |
IWL_TOF_INITIATOR_FLAGS_SPECIFIC_CALIB = BIT(15), |
| 1138 |
IWL_TOF_INITIATOR_FLAGS_COMMON_CALIB = BIT(16), |
| 1139 |
IWL_TOF_INITIATOR_FLAGS_NON_ASAP_SUPPORT = BIT(20), |
| 1140 |
}; /* LOCATION_RANGE_REQ_CMD_API_S_VER_5 */ |
| 1141 |
|
| 1142 |
#define IWL_TOF_MAX_APS 5 |
| 1143 |
#define IWL_MVM_TOF_MAX_TWO_SIDED_APS 5 |
| 1144 |
|
| 1145 |
/** |
| 1146 |
* struct iwl_tof_range_req_cmd_v5 - start measurement cmd |
| 1147 |
* @initiator_flags: see flags @ iwl_tof_initiator_flags |
| 1148 |
* @request_id: A Token incremented per request. The same Token will be |
| 1149 |
* sent back in the range response |
| 1150 |
* @initiator: 0- NW initiated, 1 - Client Initiated |
| 1151 |
* @one_sided_los_disable: '0'- run ML-Algo for both ToF/OneSided, |
| 1152 |
* '1' - run ML-Algo for ToF only |
| 1153 |
* @req_timeout: Requested timeout of the response in units of 100ms. |
| 1154 |
* This is equivalent to the session time configured to the |
| 1155 |
* LMAC in Initiator Request |
| 1156 |
* @report_policy: Supported partially for this release: For current release - |
| 1157 |
* the range report will be uploaded as a batch when ready or |
| 1158 |
* when the session is done (successfully / partially). |
| 1159 |
* one of iwl_tof_response_mode. |
| 1160 |
* @reserved0: reserved |
| 1161 |
* @num_of_ap: Number of APs to measure (error if > IWL_TOF_MAX_APS) |
| 1162 |
* @macaddr_random: '0' Use default source MAC address (i.e. p2_p), |
| 1163 |
* '1' Use MAC Address randomization according to the below |
| 1164 |
* @range_req_bssid: ranging request BSSID |
| 1165 |
* @macaddr_template: MAC address template to use for non-randomized bits |
| 1166 |
* @macaddr_mask: Bits set to 0 shall be copied from the MAC address template. |
| 1167 |
* Bits set to 1 shall be randomized by the UMAC |
| 1168 |
* @ftm_rx_chains: Rx chain to open to receive Responder's FTMs (XVT) |
| 1169 |
* @ftm_tx_chains: Tx chain to send the ack to the Responder FTM (XVT) |
| 1170 |
* @common_calib: The common calib value to inject to this measurement calc |
| 1171 |
* @specific_calib: The specific calib value to inject to this measurement calc |
| 1172 |
* @ap: per-AP request data |
| 1173 |
*/ |
| 1174 |
struct iwl_tof_range_req_cmd_v5 { |
| 1175 |
__le32 initiator_flags; |
| 1176 |
u8 request_id; |
| 1177 |
u8 initiator; |
| 1178 |
u8 one_sided_los_disable; |
| 1179 |
u8 req_timeout; |
| 1180 |
u8 report_policy; |
| 1181 |
u8 reserved0; |
| 1182 |
u8 num_of_ap; |
| 1183 |
u8 macaddr_random; |
| 1184 |
u8 range_req_bssid[ETH_ALEN]; |
| 1185 |
u8 macaddr_template[ETH_ALEN]; |
| 1186 |
u8 macaddr_mask[ETH_ALEN]; |
| 1187 |
u8 ftm_rx_chains; |
| 1188 |
u8 ftm_tx_chains; |
| 1189 |
__le16 common_calib; |
| 1190 |
__le16 specific_calib; |
| 1191 |
struct iwl_tof_range_req_ap_entry_v2 ap[IWL_TOF_MAX_APS]; |
| 1192 |
} __packed; |
| 1193 |
/* LOCATION_RANGE_REQ_CMD_API_S_VER_5 */ |
| 1194 |
|
| 1195 |
/** |
| 1196 |
* struct iwl_tof_range_req_cmd_v7 - start measurement cmd |
| 1197 |
* @initiator_flags: see flags @ iwl_tof_initiator_flags |
| 1198 |
* @request_id: A Token incremented per request. The same Token will be |
| 1199 |
* sent back in the range response |
| 1200 |
* @num_of_ap: Number of APs to measure (error if > IWL_TOF_MAX_APS) |
| 1201 |
* @range_req_bssid: ranging request BSSID |
| 1202 |
* @macaddr_mask: Bits set to 0 shall be copied from the MAC address template. |
| 1203 |
* Bits set to 1 shall be randomized by the UMAC |
| 1204 |
* @macaddr_template: MAC address template to use for non-randomized bits |
| 1205 |
* @req_timeout_ms: Requested timeout of the response in units of milliseconds. |
| 1206 |
* This is the session time for completing the measurement. |
| 1207 |
* @tsf_mac_id: report the measurement start time for each ap in terms of the |
| 1208 |
* TSF of this mac id. 0xff to disable TSF reporting. |
| 1209 |
* @common_calib: The common calib value to inject to this measurement calc |
| 1210 |
* @specific_calib: The specific calib value to inject to this measurement calc |
| 1211 |
* @ap: per-AP request data, see &struct iwl_tof_range_req_ap_entry_v2. |
| 1212 |
*/ |
| 1213 |
struct iwl_tof_range_req_cmd_v7 { |
| 1214 |
__le32 initiator_flags; |
| 1215 |
u8 request_id; |
| 1216 |
u8 num_of_ap; |
| 1217 |
u8 range_req_bssid[ETH_ALEN]; |
| 1218 |
u8 macaddr_mask[ETH_ALEN]; |
| 1219 |
u8 macaddr_template[ETH_ALEN]; |
| 1220 |
__le32 req_timeout_ms; |
| 1221 |
__le32 tsf_mac_id; |
| 1222 |
__le16 common_calib; |
| 1223 |
__le16 specific_calib; |
| 1224 |
struct iwl_tof_range_req_ap_entry_v3 ap[IWL_TOF_MAX_APS]; |
| 1225 |
} __packed; /* LOCATION_RANGE_REQ_CMD_API_S_VER_7 */ |
| 1226 |
|
| 1227 |
/** |
| 1228 |
* struct iwl_tof_range_req_cmd_v8 - start measurement cmd |
| 1229 |
* @initiator_flags: see flags @ iwl_tof_initiator_flags |
| 1230 |
* @request_id: A Token incremented per request. The same Token will be |
| 1231 |
* sent back in the range response |
| 1232 |
* @num_of_ap: Number of APs to measure (error if > IWL_TOF_MAX_APS) |
| 1233 |
* @range_req_bssid: ranging request BSSID |
| 1234 |
* @macaddr_mask: Bits set to 0 shall be copied from the MAC address template. |
| 1235 |
* Bits set to 1 shall be randomized by the UMAC |
| 1236 |
* @macaddr_template: MAC address template to use for non-randomized bits |
| 1237 |
* @req_timeout_ms: Requested timeout of the response in units of milliseconds. |
| 1238 |
* This is the session time for completing the measurement. |
| 1239 |
* @tsf_mac_id: report the measurement start time for each ap in terms of the |
| 1240 |
* TSF of this mac id. 0xff to disable TSF reporting. |
| 1241 |
* @common_calib: The common calib value to inject to this measurement calc |
| 1242 |
* @specific_calib: The specific calib value to inject to this measurement calc |
| 1243 |
* @ap: per-AP request data, see &struct iwl_tof_range_req_ap_entry_v2. |
| 1244 |
*/ |
| 1245 |
struct iwl_tof_range_req_cmd_v8 { |
| 1246 |
__le32 initiator_flags; |
| 1247 |
u8 request_id; |
| 1248 |
u8 num_of_ap; |
| 1249 |
u8 range_req_bssid[ETH_ALEN]; |
| 1250 |
u8 macaddr_mask[ETH_ALEN]; |
| 1251 |
u8 macaddr_template[ETH_ALEN]; |
| 1252 |
__le32 req_timeout_ms; |
| 1253 |
__le32 tsf_mac_id; |
| 1254 |
__le16 common_calib; |
| 1255 |
__le16 specific_calib; |
| 1256 |
struct iwl_tof_range_req_ap_entry_v4 ap[IWL_TOF_MAX_APS]; |
| 1257 |
} __packed; /* LOCATION_RANGE_REQ_CMD_API_S_VER_8 */ |
| 1258 |
|
| 1259 |
/** |
| 1260 |
* struct iwl_tof_range_req_cmd_v9 - start measurement cmd |
| 1261 |
* @initiator_flags: see flags @ iwl_tof_initiator_flags |
| 1262 |
* @request_id: A Token incremented per request. The same Token will be |
| 1263 |
* sent back in the range response |
| 1264 |
* @num_of_ap: Number of APs to measure (error if > IWL_TOF_MAX_APS) |
| 1265 |
* @range_req_bssid: ranging request BSSID |
| 1266 |
* @macaddr_mask: Bits set to 0 shall be copied from the MAC address template. |
| 1267 |
* Bits set to 1 shall be randomized by the UMAC |
| 1268 |
* @macaddr_template: MAC address template to use for non-randomized bits |
| 1269 |
* @req_timeout_ms: Requested timeout of the response in units of milliseconds. |
| 1270 |
* This is the session time for completing the measurement. |
| 1271 |
* @tsf_mac_id: report the measurement start time for each ap in terms of the |
| 1272 |
* TSF of this mac id. 0xff to disable TSF reporting. |
| 1273 |
* @ap: per-AP request data, see &struct iwl_tof_range_req_ap_entry_v2. |
| 1274 |
*/ |
| 1275 |
struct iwl_tof_range_req_cmd_v9 { |
| 1276 |
__le32 initiator_flags; |
| 1277 |
u8 request_id; |
| 1278 |
u8 num_of_ap; |
| 1279 |
u8 range_req_bssid[ETH_ALEN]; |
| 1280 |
u8 macaddr_mask[ETH_ALEN]; |
| 1281 |
u8 macaddr_template[ETH_ALEN]; |
| 1282 |
__le32 req_timeout_ms; |
| 1283 |
__le32 tsf_mac_id; |
| 1284 |
struct iwl_tof_range_req_ap_entry_v6 ap[IWL_TOF_MAX_APS]; |
| 1285 |
} __packed; /* LOCATION_RANGE_REQ_CMD_API_S_VER_9 */ |
| 1286 |
|
| 1287 |
/** |
| 1288 |
* struct iwl_tof_range_req_cmd_v11 - start measurement cmd |
| 1289 |
* @initiator_flags: see flags @ iwl_tof_initiator_flags |
| 1290 |
* @request_id: A Token incremented per request. The same Token will be |
| 1291 |
* sent back in the range response |
| 1292 |
* @num_of_ap: Number of APs to measure (error if > IWL_TOF_MAX_APS) |
| 1293 |
* @range_req_bssid: ranging request BSSID |
| 1294 |
* @macaddr_mask: Bits set to 0 shall be copied from the MAC address template. |
| 1295 |
* Bits set to 1 shall be randomized by the UMAC |
| 1296 |
* @macaddr_template: MAC address template to use for non-randomized bits |
| 1297 |
* @req_timeout_ms: Requested timeout of the response in units of milliseconds. |
| 1298 |
* This is the session time for completing the measurement. |
| 1299 |
* @tsf_mac_id: report the measurement start time for each ap in terms of the |
| 1300 |
* TSF of this mac id. 0xff to disable TSF reporting. |
| 1301 |
* @ap: per-AP request data, see &struct iwl_tof_range_req_ap_entry_v2. |
| 1302 |
*/ |
| 1303 |
struct iwl_tof_range_req_cmd_v11 { |
| 1304 |
__le32 initiator_flags; |
| 1305 |
u8 request_id; |
| 1306 |
u8 num_of_ap; |
| 1307 |
u8 range_req_bssid[ETH_ALEN]; |
| 1308 |
u8 macaddr_mask[ETH_ALEN]; |
| 1309 |
u8 macaddr_template[ETH_ALEN]; |
| 1310 |
__le32 req_timeout_ms; |
| 1311 |
__le32 tsf_mac_id; |
| 1312 |
struct iwl_tof_range_req_ap_entry_v7 ap[IWL_TOF_MAX_APS]; |
| 1313 |
} __packed; /* LOCATION_RANGE_REQ_CMD_API_S_VER_11 */ |
| 1314 |
|
| 1315 |
/** |
| 1316 |
* struct iwl_tof_range_req_cmd_v12 - start measurement cmd |
| 1317 |
* @initiator_flags: see flags @ iwl_tof_initiator_flags |
| 1318 |
* @request_id: A Token incremented per request. The same Token will be |
| 1319 |
* sent back in the range response |
| 1320 |
* @num_of_ap: Number of APs to measure (error if > IWL_TOF_MAX_APS) |
| 1321 |
* @range_req_bssid: ranging request BSSID |
| 1322 |
* @macaddr_mask: Bits set to 0 shall be copied from the MAC address template. |
| 1323 |
* Bits set to 1 shall be randomized by the UMAC |
| 1324 |
* @macaddr_template: MAC address template to use for non-randomized bits |
| 1325 |
* @req_timeout_ms: Requested timeout of the response in units of milliseconds. |
| 1326 |
* This is the session time for completing the measurement. |
| 1327 |
* @tsf_mac_id: report the measurement start time for each ap in terms of the |
| 1328 |
* TSF of this mac id. 0xff to disable TSF reporting. |
| 1329 |
* @ap: per-AP request data, see &struct iwl_tof_range_req_ap_entry_v2. |
| 1330 |
*/ |
| 1331 |
struct iwl_tof_range_req_cmd_v12 { |
| 1332 |
__le32 initiator_flags; |
| 1333 |
u8 request_id; |
| 1334 |
u8 num_of_ap; |
| 1335 |
u8 range_req_bssid[ETH_ALEN]; |
| 1336 |
u8 macaddr_mask[ETH_ALEN]; |
| 1337 |
u8 macaddr_template[ETH_ALEN]; |
| 1338 |
__le32 req_timeout_ms; |
| 1339 |
__le32 tsf_mac_id; |
| 1340 |
struct iwl_tof_range_req_ap_entry_v8 ap[IWL_TOF_MAX_APS]; |
| 1341 |
} __packed; /* LOCATION_RANGE_REQ_CMD_API_S_VER_12 */ |
| 1342 |
|
| 1343 |
/** |
| 1344 |
* struct iwl_tof_range_req_cmd_v13 - start measurement cmd |
| 1345 |
* @initiator_flags: see flags @ iwl_tof_initiator_flags |
| 1346 |
* @request_id: A Token incremented per request. The same Token will be |
| 1347 |
* sent back in the range response |
| 1348 |
* @num_of_ap: Number of APs to measure (error if > IWL_TOF_MAX_APS) |
| 1349 |
* @range_req_bssid: ranging request BSSID |
| 1350 |
* @macaddr_mask: Bits set to 0 shall be copied from the MAC address template. |
| 1351 |
* Bits set to 1 shall be randomized by the UMAC |
| 1352 |
* @macaddr_template: MAC address template to use for non-randomized bits |
| 1353 |
* @req_timeout_ms: Requested timeout of the response in units of milliseconds. |
| 1354 |
* This is the session time for completing the measurement. |
| 1355 |
* @tsf_mac_id: report the measurement start time for each ap in terms of the |
| 1356 |
* TSF of this mac id. 0xff to disable TSF reporting. |
| 1357 |
* @ap: per-AP request data, see &struct iwl_tof_range_req_ap_entry_v9. |
| 1358 |
*/ |
| 1359 |
struct iwl_tof_range_req_cmd_v13 { |
| 1360 |
__le32 initiator_flags; |
| 1361 |
u8 request_id; |
| 1362 |
u8 num_of_ap; |
| 1363 |
u8 range_req_bssid[ETH_ALEN]; |
| 1364 |
u8 macaddr_mask[ETH_ALEN]; |
| 1365 |
u8 macaddr_template[ETH_ALEN]; |
| 1366 |
__le32 req_timeout_ms; |
| 1367 |
__le32 tsf_mac_id; |
| 1368 |
struct iwl_tof_range_req_ap_entry_v9 ap[IWL_TOF_MAX_APS]; |
| 1369 |
} __packed; /* LOCATION_RANGE_REQ_CMD_API_S_VER_13 */ |
| 1370 |
|
| 1371 |
/** |
| 1372 |
* struct iwl_tof_range_req_cmd - start measurement cmd |
| 1373 |
* @initiator_flags: see flags @ iwl_tof_initiator_flags |
| 1374 |
* @request_id: A Token incremented per request. The same Token will be |
| 1375 |
* sent back in the range response |
| 1376 |
* @num_of_ap: Number of APs to measure (error if > IWL_TOF_MAX_APS) |
| 1377 |
* @range_req_bssid: ranging request BSSID |
| 1378 |
* @macaddr_mask: Bits set to 0 shall be copied from the MAC address template. |
| 1379 |
* Bits set to 1 shall be randomized by the UMAC |
| 1380 |
* @macaddr_template: MAC address template to use for non-randomized bits |
| 1381 |
* @req_timeout_ms: Requested timeout of the response in units of milliseconds. |
| 1382 |
* This is the session time for completing the measurement. |
| 1383 |
* @tsf_mac_id: report the measurement start time for each ap in terms of the |
| 1384 |
* TSF of this mac id. 0xff to disable TSF reporting. |
| 1385 |
* @ap: per-AP request data, see &struct iwl_tof_range_req_ap_entry. |
| 1386 |
*/ |
| 1387 |
struct iwl_tof_range_req_cmd { |
| 1388 |
__le32 initiator_flags; |
| 1389 |
u8 request_id; |
| 1390 |
u8 num_of_ap; |
| 1391 |
u8 range_req_bssid[ETH_ALEN]; |
| 1392 |
u8 macaddr_mask[ETH_ALEN]; |
| 1393 |
u8 macaddr_template[ETH_ALEN]; |
| 1394 |
__le32 req_timeout_ms; |
| 1395 |
__le32 tsf_mac_id; |
| 1396 |
struct iwl_tof_range_req_ap_entry ap[IWL_TOF_MAX_APS]; |
| 1397 |
} __packed; /* LOCATION_RANGE_REQ_CMD_API_S_VER_15 */ |
| 1398 |
|
| 1399 |
/* |
| 1400 |
* enum iwl_tof_range_request_status - status of the sent request |
| 1401 |
* @IWL_TOF_RANGE_REQUEST_STATUS_SUCCESSFUL - FW successfully received the |
| 1402 |
* request |
| 1403 |
* @IWL_TOF_RANGE_REQUEST_STATUS_BUSY - FW is busy with a previous request, the |
| 1404 |
* sent request will not be handled |
| 1405 |
*/ |
| 1406 |
enum iwl_tof_range_request_status { |
| 1407 |
IWL_TOF_RANGE_REQUEST_STATUS_SUCCESS, |
| 1408 |
IWL_TOF_RANGE_REQUEST_STATUS_BUSY, |
| 1409 |
}; |
| 1410 |
|
| 1411 |
/** |
| 1412 |
* enum iwl_tof_entry_status - TOF entry status |
| 1413 |
* |
| 1414 |
* @IWL_TOF_ENTRY_SUCCESS: successful measurement. |
| 1415 |
* @IWL_TOF_ENTRY_GENERAL_FAILURE: General failure. |
| 1416 |
* @IWL_TOF_ENTRY_NO_RESPONSE: Responder didn't reply to the request. |
| 1417 |
* @IWL_TOF_ENTRY_REQUEST_REJECTED: Responder rejected the request. |
| 1418 |
* @IWL_TOF_ENTRY_NOT_SCHEDULED: Time event was scheduled but not called yet. |
| 1419 |
* @IWL_TOF_ENTRY_TIMING_MEASURE_TIMEOUT: Time event triggered but no |
| 1420 |
* measurement was completed. |
| 1421 |
* @IWL_TOF_ENTRY_TARGET_DIFF_CH_CANNOT_CHANGE: No range due inability to switch |
| 1422 |
* from the primary channel. |
| 1423 |
* @IWL_TOF_ENTRY_RANGE_NOT_SUPPORTED: Device doesn't support FTM. |
| 1424 |
* @IWL_TOF_ENTRY_REQUEST_ABORT_UNKNOWN_REASON: Request aborted due to unknown |
| 1425 |
* reason. |
| 1426 |
* @IWL_TOF_ENTRY_LOCATION_INVALID_T1_T4_TIME_STAMP: Failure due to invalid |
| 1427 |
* T1/T4. |
| 1428 |
* @IWL_TOF_ENTRY_11MC_PROTOCOL_FAILURE: Failure due to invalid FTM frame |
| 1429 |
* structure. |
| 1430 |
* @IWL_TOF_ENTRY_REQUEST_CANNOT_SCHED: Request cannot be scheduled. |
| 1431 |
* @IWL_TOF_ENTRY_RESPONDER_CANNOT_COLABORATE: Responder cannot serve the |
| 1432 |
* initiator for some period, period supplied in @refusal_period. |
| 1433 |
* @IWL_TOF_ENTRY_BAD_REQUEST_ARGS: Bad request arguments. |
| 1434 |
* @IWL_TOF_ENTRY_WIFI_NOT_ENABLED: Wifi not enabled. |
| 1435 |
* @IWL_TOF_ENTRY_RESPONDER_OVERRIDE_PARAMS: Responder override the original |
| 1436 |
* parameters within the current session. |
| 1437 |
*/ |
| 1438 |
enum iwl_tof_entry_status { |
| 1439 |
IWL_TOF_ENTRY_SUCCESS = 0, |
| 1440 |
IWL_TOF_ENTRY_GENERAL_FAILURE = 1, |
| 1441 |
IWL_TOF_ENTRY_NO_RESPONSE = 2, |
| 1442 |
IWL_TOF_ENTRY_REQUEST_REJECTED = 3, |
| 1443 |
IWL_TOF_ENTRY_NOT_SCHEDULED = 4, |
| 1444 |
IWL_TOF_ENTRY_TIMING_MEASURE_TIMEOUT = 5, |
| 1445 |
IWL_TOF_ENTRY_TARGET_DIFF_CH_CANNOT_CHANGE = 6, |
| 1446 |
IWL_TOF_ENTRY_RANGE_NOT_SUPPORTED = 7, |
| 1447 |
IWL_TOF_ENTRY_REQUEST_ABORT_UNKNOWN_REASON = 8, |
| 1448 |
IWL_TOF_ENTRY_LOCATION_INVALID_T1_T4_TIME_STAMP = 9, |
| 1449 |
IWL_TOF_ENTRY_11MC_PROTOCOL_FAILURE = 10, |
| 1450 |
IWL_TOF_ENTRY_REQUEST_CANNOT_SCHED = 11, |
| 1451 |
IWL_TOF_ENTRY_RESPONDER_CANNOT_COLABORATE = 12, |
| 1452 |
IWL_TOF_ENTRY_BAD_REQUEST_ARGS = 13, |
| 1453 |
IWL_TOF_ENTRY_WIFI_NOT_ENABLED = 14, |
| 1454 |
IWL_TOF_ENTRY_RESPONDER_OVERRIDE_PARAMS = 15, |
| 1455 |
}; /* LOCATION_RANGE_RSP_AP_ENTRY_NTFY_API_S_VER_2 */ |
| 1456 |
|
| 1457 |
/** |
| 1458 |
* struct iwl_tof_range_rsp_ap_entry_ntfy_v3 - AP parameters (response) |
| 1459 |
* @bssid: BSSID of the AP |
| 1460 |
* @measure_status: current APs measurement status, one of |
| 1461 |
* &enum iwl_tof_entry_status. |
| 1462 |
* @measure_bw: Current AP Bandwidth: 0 20MHz, 1 40MHz, 2 80MHz |
| 1463 |
* @rtt: The Round Trip Time that took for the last measurement for |
| 1464 |
* current AP [pSec] |
| 1465 |
* @rtt_variance: The Variance of the RTT values measured for current AP |
| 1466 |
* @rtt_spread: The Difference between the maximum and the minimum RTT |
| 1467 |
* values measured for current AP in the current session [pSec] |
| 1468 |
* @rssi: RSSI as uploaded in the Channel Estimation notification |
| 1469 |
* @rssi_spread: The Difference between the maximum and the minimum RSSI values |
| 1470 |
* measured for current AP in the current session |
| 1471 |
* @reserved: reserved |
| 1472 |
* @refusal_period: refusal period in case of |
| 1473 |
* @IWL_TOF_ENTRY_RESPONDER_CANNOT_COLABORATE [sec] |
| 1474 |
* @range: Measured range [cm] |
| 1475 |
* @range_variance: Measured range variance [cm] |
| 1476 |
* @timestamp: The GP2 Clock [usec] where Channel Estimation notification was |
| 1477 |
* uploaded by the LMAC |
| 1478 |
* @t2t3_initiator: as calculated from the algo in the initiator |
| 1479 |
* @t1t4_responder: as calculated from the algo in the responder |
| 1480 |
* @common_calib: Calib val that was used in for this AP measurement |
| 1481 |
* @specific_calib: val that was used in for this AP measurement |
| 1482 |
* @papd_calib_output: The result of the tof papd calibration that was injected |
| 1483 |
* into the algorithm. |
| 1484 |
*/ |
| 1485 |
struct iwl_tof_range_rsp_ap_entry_ntfy_v3 { |
| 1486 |
u8 bssid[ETH_ALEN]; |
| 1487 |
u8 measure_status; |
| 1488 |
u8 measure_bw; |
| 1489 |
__le32 rtt; |
| 1490 |
__le32 rtt_variance; |
| 1491 |
__le32 rtt_spread; |
| 1492 |
s8 rssi; |
| 1493 |
u8 rssi_spread; |
| 1494 |
u8 reserved; |
| 1495 |
u8 refusal_period; |
| 1496 |
__le32 range; |
| 1497 |
__le32 range_variance; |
| 1498 |
__le32 timestamp; |
| 1499 |
__le32 t2t3_initiator; |
| 1500 |
__le32 t1t4_responder; |
| 1501 |
__le16 common_calib; |
| 1502 |
__le16 specific_calib; |
| 1503 |
__le32 papd_calib_output; |
| 1504 |
} __packed; /* LOCATION_RANGE_RSP_AP_ETRY_NTFY_API_S_VER_3 */ |
| 1505 |
|
| 1506 |
/** |
| 1507 |
* struct iwl_tof_range_rsp_ap_entry_ntfy_v4 - AP parameters (response) |
| 1508 |
* @bssid: BSSID of the AP |
| 1509 |
* @measure_status: current APs measurement status, one of |
| 1510 |
* &enum iwl_tof_entry_status. |
| 1511 |
* @measure_bw: Current AP Bandwidth: 0 20MHz, 1 40MHz, 2 80MHz |
| 1512 |
* @rtt: The Round Trip Time that took for the last measurement for |
| 1513 |
* current AP [pSec] |
| 1514 |
* @rtt_variance: The Variance of the RTT values measured for current AP |
| 1515 |
* @rtt_spread: The Difference between the maximum and the minimum RTT |
| 1516 |
* values measured for current AP in the current session [pSec] |
| 1517 |
* @rssi: RSSI as uploaded in the Channel Estimation notification |
| 1518 |
* @rssi_spread: The Difference between the maximum and the minimum RSSI values |
| 1519 |
* measured for current AP in the current session |
| 1520 |
* @last_burst: 1 if no more FTM sessions are scheduled for this responder |
| 1521 |
* @refusal_period: refusal period in case of |
| 1522 |
* @IWL_TOF_ENTRY_RESPONDER_CANNOT_COLABORATE [sec] |
| 1523 |
* @timestamp: The GP2 Clock [usec] where Channel Estimation notification was |
| 1524 |
* uploaded by the LMAC |
| 1525 |
* @start_tsf: measurement start time in TSF of the mac specified in the range |
| 1526 |
* request |
| 1527 |
* @rx_rate_n_flags: rate and flags of the last FTM frame received from this |
| 1528 |
* responder |
| 1529 |
* @tx_rate_n_flags: rate and flags of the last ack sent to this responder |
| 1530 |
* @t2t3_initiator: as calculated from the algo in the initiator |
| 1531 |
* @t1t4_responder: as calculated from the algo in the responder |
| 1532 |
* @common_calib: Calib val that was used in for this AP measurement |
| 1533 |
* @specific_calib: val that was used in for this AP measurement |
| 1534 |
* @papd_calib_output: The result of the tof papd calibration that was injected |
| 1535 |
* into the algorithm. |
| 1536 |
*/ |
| 1537 |
struct iwl_tof_range_rsp_ap_entry_ntfy_v4 { |
| 1538 |
u8 bssid[ETH_ALEN]; |
| 1539 |
u8 measure_status; |
| 1540 |
u8 measure_bw; |
| 1541 |
__le32 rtt; |
| 1542 |
__le32 rtt_variance; |
| 1543 |
__le32 rtt_spread; |
| 1544 |
s8 rssi; |
| 1545 |
u8 rssi_spread; |
| 1546 |
u8 last_burst; |
| 1547 |
u8 refusal_period; |
| 1548 |
__le32 timestamp; |
| 1549 |
__le32 start_tsf; |
| 1550 |
__le32 rx_rate_n_flags; |
| 1551 |
__le32 tx_rate_n_flags; |
| 1552 |
__le32 t2t3_initiator; |
| 1553 |
__le32 t1t4_responder; |
| 1554 |
__le16 common_calib; |
| 1555 |
__le16 specific_calib; |
| 1556 |
__le32 papd_calib_output; |
| 1557 |
} __packed; /* LOCATION_RANGE_RSP_AP_ETRY_NTFY_API_S_VER_4 */ |
| 1558 |
|
| 1559 |
/** |
| 1560 |
* struct iwl_tof_range_rsp_ap_entry_ntfy_v5 - AP parameters (response) |
| 1561 |
* @bssid: BSSID of the AP |
| 1562 |
* @measure_status: current APs measurement status, one of |
| 1563 |
* &enum iwl_tof_entry_status. |
| 1564 |
* @measure_bw: Current AP Bandwidth: 0 20MHz, 1 40MHz, 2 80MHz |
| 1565 |
* @rtt: The Round Trip Time that took for the last measurement for |
| 1566 |
* current AP [pSec] |
| 1567 |
* @rtt_variance: The Variance of the RTT values measured for current AP |
| 1568 |
* @rtt_spread: The Difference between the maximum and the minimum RTT |
| 1569 |
* values measured for current AP in the current session [pSec] |
| 1570 |
* @rssi: RSSI as uploaded in the Channel Estimation notification |
| 1571 |
* @rssi_spread: The Difference between the maximum and the minimum RSSI values |
| 1572 |
* measured for current AP in the current session |
| 1573 |
* @last_burst: 1 if no more FTM sessions are scheduled for this responder |
| 1574 |
* @refusal_period: refusal period in case of |
| 1575 |
* @IWL_TOF_ENTRY_RESPONDER_CANNOT_COLABORATE [sec] |
| 1576 |
* @timestamp: The GP2 Clock [usec] where Channel Estimation notification was |
| 1577 |
* uploaded by the LMAC |
| 1578 |
* @start_tsf: measurement start time in TSF of the mac specified in the range |
| 1579 |
* request |
| 1580 |
* @rx_rate_n_flags: rate and flags of the last FTM frame received from this |
| 1581 |
* responder |
| 1582 |
* @tx_rate_n_flags: rate and flags of the last ack sent to this responder |
| 1583 |
* @t2t3_initiator: as calculated from the algo in the initiator |
| 1584 |
* @t1t4_responder: as calculated from the algo in the responder |
| 1585 |
* @common_calib: Calib val that was used in for this AP measurement |
| 1586 |
* @specific_calib: val that was used in for this AP measurement |
| 1587 |
* @papd_calib_output: The result of the tof papd calibration that was injected |
| 1588 |
* into the algorithm. |
| 1589 |
* @rttConfidence: a value between 0 - 31 that represents the rtt accuracy. |
| 1590 |
* @reserved: for alignment |
| 1591 |
*/ |
| 1592 |
struct iwl_tof_range_rsp_ap_entry_ntfy_v5 { |
| 1593 |
u8 bssid[ETH_ALEN]; |
| 1594 |
u8 measure_status; |
| 1595 |
u8 measure_bw; |
| 1596 |
__le32 rtt; |
| 1597 |
__le32 rtt_variance; |
| 1598 |
__le32 rtt_spread; |
| 1599 |
s8 rssi; |
| 1600 |
u8 rssi_spread; |
| 1601 |
u8 last_burst; |
| 1602 |
u8 refusal_period; |
| 1603 |
__le32 timestamp; |
| 1604 |
__le32 start_tsf; |
| 1605 |
__le32 rx_rate_n_flags; |
| 1606 |
__le32 tx_rate_n_flags; |
| 1607 |
__le32 t2t3_initiator; |
| 1608 |
__le32 t1t4_responder; |
| 1609 |
__le16 common_calib; |
| 1610 |
__le16 specific_calib; |
| 1611 |
__le32 papd_calib_output; |
| 1612 |
u8 rttConfidence; |
| 1613 |
u8 reserved[3]; |
| 1614 |
} __packed; /* LOCATION_RANGE_RSP_AP_ETRY_NTFY_API_S_VER_5 */ |
| 1615 |
|
| 1616 |
/** |
| 1617 |
* struct iwl_tof_range_rsp_ap_entry_ntfy_v7 - AP parameters (response) |
| 1618 |
* @bssid: BSSID of the AP |
| 1619 |
* @measure_status: current APs measurement status, one of |
| 1620 |
* &enum iwl_tof_entry_status. |
| 1621 |
* @measure_bw: Current AP Bandwidth: 0 20MHz, 1 40MHz, 2 80MHz |
| 1622 |
* @rtt: The Round Trip Time that took for the last measurement for |
| 1623 |
* current AP [pSec] |
| 1624 |
* @rtt_variance: The Variance of the RTT values measured for current AP |
| 1625 |
* @rtt_spread: The Difference between the maximum and the minimum RTT |
| 1626 |
* values measured for current AP in the current session [pSec] |
| 1627 |
* @rssi: RSSI as uploaded in the Channel Estimation notification |
| 1628 |
* @rssi_spread: The Difference between the maximum and the minimum RSSI values |
| 1629 |
* measured for current AP in the current session |
| 1630 |
* @last_burst: 1 if no more FTM sessions are scheduled for this responder |
| 1631 |
* @refusal_period: refusal period in case of |
| 1632 |
* @IWL_TOF_ENTRY_RESPONDER_CANNOT_COLABORATE [sec] |
| 1633 |
* @timestamp: The GP2 Clock [usec] where Channel Estimation notification was |
| 1634 |
* uploaded by the LMAC |
| 1635 |
* @start_tsf: measurement start time in TSF of the mac specified in the range |
| 1636 |
* request |
| 1637 |
* @rx_rate_n_flags: rate and flags of the last FTM frame received from this |
| 1638 |
* responder |
| 1639 |
* @tx_rate_n_flags: rate and flags of the last ack sent to this responder |
| 1640 |
* @t2t3_initiator: as calculated from the algo in the initiator |
| 1641 |
* @t1t4_responder: as calculated from the algo in the responder |
| 1642 |
* @common_calib: Calib val that was used in for this AP measurement |
| 1643 |
* @specific_calib: val that was used in for this AP measurement |
| 1644 |
* @papd_calib_output: The result of the tof papd calibration that was injected |
| 1645 |
* into the algorithm. |
| 1646 |
* @rttConfidence: a value between 0 - 31 that represents the rtt accuracy. |
| 1647 |
* @reserved: for alignment |
| 1648 |
* @rx_pn: the last PN used for this responder Rx in case PMF is configured in |
| 1649 |
* LE byte order. |
| 1650 |
* @tx_pn: the last PN used for this responder Tx in case PMF is configured in |
| 1651 |
* LE byte order. |
| 1652 |
*/ |
| 1653 |
struct iwl_tof_range_rsp_ap_entry_ntfy_v7 { |
| 1654 |
u8 bssid[ETH_ALEN]; |
| 1655 |
u8 measure_status; |
| 1656 |
u8 measure_bw; |
| 1657 |
__le32 rtt; |
| 1658 |
__le32 rtt_variance; |
| 1659 |
__le32 rtt_spread; |
| 1660 |
s8 rssi; |
| 1661 |
u8 rssi_spread; |
| 1662 |
u8 last_burst; |
| 1663 |
u8 refusal_period; |
| 1664 |
__le32 timestamp; |
| 1665 |
__le32 start_tsf; |
| 1666 |
__le32 rx_rate_n_flags; |
| 1667 |
__le32 tx_rate_n_flags; |
| 1668 |
__le32 t2t3_initiator; |
| 1669 |
__le32 t1t4_responder; |
| 1670 |
__le16 common_calib; |
| 1671 |
__le16 specific_calib; |
| 1672 |
__le32 papd_calib_output; |
| 1673 |
u8 rttConfidence; |
| 1674 |
u8 reserved[3]; |
| 1675 |
u8 rx_pn[IEEE80211_CCMP_PN_LEN]; |
| 1676 |
u8 tx_pn[IEEE80211_CCMP_PN_LEN]; |
| 1677 |
} __packed; /* LOCATION_RANGE_RSP_AP_ETRY_NTFY_API_S_VER_6, |
| 1678 |
LOCATION_RANGE_RSP_AP_ETRY_NTFY_API_S_VER_7 */ |
| 1679 |
|
| 1680 |
/** |
| 1681 |
* struct iwl_tof_range_rsp_ap_entry_ntfy - AP parameters (response) |
| 1682 |
* @bssid: BSSID of the AP |
| 1683 |
* @measure_status: current APs measurement status, one of |
| 1684 |
* &enum iwl_tof_entry_status. |
| 1685 |
* @measure_bw: Current AP Bandwidth: 0 20MHz, 1 40MHz, 2 80MHz |
| 1686 |
* @rtt: The Round Trip Time that took for the last measurement for |
| 1687 |
* current AP [pSec] |
| 1688 |
* @rtt_variance: The Variance of the RTT values measured for current AP |
| 1689 |
* @rtt_spread: The Difference between the maximum and the minimum RTT |
| 1690 |
* values measured for current AP in the current session [pSec] |
| 1691 |
* @rssi: RSSI as uploaded in the Channel Estimation notification |
| 1692 |
* @rssi_spread: The Difference between the maximum and the minimum RSSI values |
| 1693 |
* measured for current AP in the current session |
| 1694 |
* @last_burst: 1 if no more FTM sessions are scheduled for this responder |
| 1695 |
* @refusal_period: refusal period in case of |
| 1696 |
* @IWL_TOF_ENTRY_RESPONDER_CANNOT_COLABORATE [sec] |
| 1697 |
* @timestamp: The GP2 Clock [usec] where Channel Estimation notification was |
| 1698 |
* uploaded by the LMAC |
| 1699 |
* @start_tsf: measurement start time in TSF of the mac specified in the range |
| 1700 |
* request |
| 1701 |
* @reserved1: reserved, for backwards compatibility |
| 1702 |
* @t2t3_initiator: as calculated from the algo in the initiator |
| 1703 |
* @t1t4_responder: as calculated from the algo in the responder |
| 1704 |
* @common_calib: Calib val that was used in for this AP measurement |
| 1705 |
* @specific_calib: val that was used in for this AP measurement |
| 1706 |
* @papd_calib_output: The result of the tof papd calibration that was injected |
| 1707 |
* into the algorithm. |
| 1708 |
* @rttConfidence: a value between 0 - 31 that represents the rtt accuracy. |
| 1709 |
* @reserved: for alignment |
| 1710 |
* @rx_pn: the last PN used for this responder Rx in case PMF is configured in |
| 1711 |
* LE byte order. |
| 1712 |
* @tx_pn: the last PN used for this responder Tx in case PMF is configured in |
| 1713 |
* LE byte order. |
| 1714 |
*/ |
| 1715 |
struct iwl_tof_range_rsp_ap_entry_ntfy { |
| 1716 |
u8 bssid[ETH_ALEN]; |
| 1717 |
u8 measure_status; |
| 1718 |
u8 measure_bw; |
| 1719 |
__le32 rtt; |
| 1720 |
__le32 rtt_variance; |
| 1721 |
__le32 rtt_spread; |
| 1722 |
s8 rssi; |
| 1723 |
u8 rssi_spread; |
| 1724 |
u8 last_burst; |
| 1725 |
u8 refusal_period; |
| 1726 |
__le32 timestamp; |
| 1727 |
__le32 start_tsf; |
| 1728 |
__le32 reserved1[2]; |
| 1729 |
__le32 t2t3_initiator; |
| 1730 |
__le32 t1t4_responder; |
| 1731 |
__le16 common_calib; |
| 1732 |
__le16 specific_calib; |
| 1733 |
__le32 papd_calib_output; |
| 1734 |
u8 rttConfidence; |
| 1735 |
u8 reserved[3]; |
| 1736 |
u8 rx_pn[IEEE80211_CCMP_PN_LEN]; |
| 1737 |
u8 tx_pn[IEEE80211_CCMP_PN_LEN]; |
| 1738 |
} __packed; /* LOCATION_RANGE_RSP_AP_ETRY_NTFY_API_S_VER_8 */ |
| 1739 |
|
| 1740 |
/** |
| 1741 |
* enum iwl_tof_response_status - tof response status |
| 1742 |
* |
| 1743 |
* @IWL_TOF_RESPONSE_SUCCESS: successful range. |
| 1744 |
* @IWL_TOF_RESPONSE_TIMEOUT: request aborted due to timeout expiration. |
| 1745 |
* partial result of ranges done so far is included in the response. |
| 1746 |
* @IWL_TOF_RESPONSE_ABORTED: Measurement aborted by command. |
| 1747 |
* @IWL_TOF_RESPONSE_FAILED: Measurement request command failed. |
| 1748 |
*/ |
| 1749 |
enum iwl_tof_response_status { |
| 1750 |
IWL_TOF_RESPONSE_SUCCESS = 0, |
| 1751 |
IWL_TOF_RESPONSE_TIMEOUT = 1, |
| 1752 |
IWL_TOF_RESPONSE_ABORTED = 4, |
| 1753 |
IWL_TOF_RESPONSE_FAILED = 5, |
| 1754 |
}; /* LOCATION_RNG_RSP_STATUS */ |
| 1755 |
|
| 1756 |
/** |
| 1757 |
* struct iwl_tof_range_rsp_ntfy_v5 - ranging response notification |
| 1758 |
* @request_id: A Token ID of the corresponding Range request |
| 1759 |
* @request_status: status of current measurement session, one of |
| 1760 |
* &enum iwl_tof_response_status. |
| 1761 |
* @last_in_batch: reprot policy (when not all responses are uploaded at once) |
| 1762 |
* @num_of_aps: Number of APs to measure (error if > IWL_TOF_MAX_APS) |
| 1763 |
* @ap: per-AP data |
| 1764 |
*/ |
| 1765 |
struct iwl_tof_range_rsp_ntfy_v5 { |
| 1766 |
u8 request_id; |
| 1767 |
u8 request_status; |
| 1768 |
u8 last_in_batch; |
| 1769 |
u8 num_of_aps; |
| 1770 |
struct iwl_tof_range_rsp_ap_entry_ntfy_v3 ap[IWL_TOF_MAX_APS]; |
| 1771 |
} __packed; /* LOCATION_RANGE_RSP_NTFY_API_S_VER_5 */ |
| 1772 |
|
| 1773 |
/** |
| 1774 |
* struct iwl_tof_range_rsp_ntfy_v6 - ranging response notification |
| 1775 |
* @request_id: A Token ID of the corresponding Range request |
| 1776 |
* @num_of_aps: Number of APs results |
| 1777 |
* @last_report: 1 if no more FTM sessions are scheduled, 0 otherwise. |
| 1778 |
* @reserved: reserved |
| 1779 |
* @ap: per-AP data |
| 1780 |
*/ |
| 1781 |
struct iwl_tof_range_rsp_ntfy_v6 { |
| 1782 |
u8 request_id; |
| 1783 |
u8 num_of_aps; |
| 1784 |
u8 last_report; |
| 1785 |
u8 reserved; |
| 1786 |
struct iwl_tof_range_rsp_ap_entry_ntfy_v4 ap[IWL_TOF_MAX_APS]; |
| 1787 |
} __packed; /* LOCATION_RANGE_RSP_NTFY_API_S_VER_6 */ |
| 1788 |
|
| 1789 |
/** |
| 1790 |
* struct iwl_tof_range_rsp_ntfy_v7 - ranging response notification |
| 1791 |
* @request_id: A Token ID of the corresponding Range request |
| 1792 |
* @num_of_aps: Number of APs results |
| 1793 |
* @last_report: 1 if no more FTM sessions are scheduled, 0 otherwise. |
| 1794 |
* @reserved: reserved |
| 1795 |
* @ap: per-AP data |
| 1796 |
*/ |
| 1797 |
struct iwl_tof_range_rsp_ntfy_v7 { |
| 1798 |
u8 request_id; |
| 1799 |
u8 num_of_aps; |
| 1800 |
u8 last_report; |
| 1801 |
u8 reserved; |
| 1802 |
struct iwl_tof_range_rsp_ap_entry_ntfy_v5 ap[IWL_TOF_MAX_APS]; |
| 1803 |
} __packed; /* LOCATION_RANGE_RSP_NTFY_API_S_VER_7 */ |
| 1804 |
|
| 1805 |
/** |
| 1806 |
* struct iwl_tof_range_rsp_ntfy_v9 - ranging response notification |
| 1807 |
* @request_id: A Token ID of the corresponding Range request |
| 1808 |
* @num_of_aps: Number of APs results |
| 1809 |
* @last_report: 1 if no more FTM sessions are scheduled, 0 otherwise. |
| 1810 |
* @reserved: reserved |
| 1811 |
* @ap: per-AP data |
| 1812 |
*/ |
| 1813 |
struct iwl_tof_range_rsp_ntfy_v9 { |
| 1814 |
u8 request_id; |
| 1815 |
u8 num_of_aps; |
| 1816 |
u8 last_report; |
| 1817 |
u8 reserved; |
| 1818 |
struct iwl_tof_range_rsp_ap_entry_ntfy_v7 ap[IWL_TOF_MAX_APS]; |
| 1819 |
} __packed; /* LOCATION_RANGE_RSP_NTFY_API_S_VER_8, |
| 1820 |
* LOCATION_RANGE_RSP_NTFY_API_S_VER_9 |
| 1821 |
*/ |
| 1822 |
|
| 1823 |
/** |
| 1824 |
* struct iwl_tof_range_rsp_ntfy - ranging response notification |
| 1825 |
* @request_id: A Token ID of the corresponding Range request |
| 1826 |
* @num_of_aps: Number of APs results |
| 1827 |
* @last_report: 1 if no more FTM sessions are scheduled, 0 otherwise. |
| 1828 |
* @reserved: reserved |
| 1829 |
* @ap: per-AP data |
| 1830 |
*/ |
| 1831 |
struct iwl_tof_range_rsp_ntfy { |
| 1832 |
u8 request_id; |
| 1833 |
u8 num_of_aps; |
| 1834 |
u8 last_report; |
| 1835 |
u8 reserved; |
| 1836 |
struct iwl_tof_range_rsp_ap_entry_ntfy ap[IWL_TOF_MAX_APS]; |
| 1837 |
} __packed; /* LOCATION_RANGE_RSP_NTFY_API_S_VER_10 */ |
| 1838 |
|
| 1839 |
#define IWL_MVM_TOF_MCSI_BUF_SIZE (245) |
| 1840 |
/** |
| 1841 |
* struct iwl_tof_mcsi_notif - used for debug |
| 1842 |
* @token: token ID for the current session |
| 1843 |
* @role: '0' - initiator, '1' - responder |
| 1844 |
* @reserved: reserved |
| 1845 |
* @initiator_bssid: initiator machine |
| 1846 |
* @responder_bssid: responder machine |
| 1847 |
* @mcsi_buffer: debug data |
| 1848 |
*/ |
| 1849 |
struct iwl_tof_mcsi_notif { |
| 1850 |
u8 token; |
| 1851 |
u8 role; |
| 1852 |
__le16 reserved; |
| 1853 |
u8 initiator_bssid[ETH_ALEN]; |
| 1854 |
u8 responder_bssid[ETH_ALEN]; |
| 1855 |
u8 mcsi_buffer[IWL_MVM_TOF_MCSI_BUF_SIZE * 4]; |
| 1856 |
} __packed; |
| 1857 |
|
| 1858 |
/** |
| 1859 |
* struct iwl_tof_range_abort_cmd - TOF range abort command |
| 1860 |
* @request_id: corresponds to a range request |
| 1861 |
* @reserved: reserved |
| 1862 |
*/ |
| 1863 |
struct iwl_tof_range_abort_cmd { |
| 1864 |
u8 request_id; |
| 1865 |
u8 reserved[3]; |
| 1866 |
} __packed; |
| 1867 |
|
| 1868 |
enum ftm_responder_stats_flags { |
| 1869 |
FTM_RESP_STAT_NON_ASAP_STARTED = BIT(0), |
| 1870 |
FTM_RESP_STAT_NON_ASAP_IN_WIN = BIT(1), |
| 1871 |
FTM_RESP_STAT_NON_ASAP_OUT_WIN = BIT(2), |
| 1872 |
FTM_RESP_STAT_TRIGGER_DUP = BIT(3), |
| 1873 |
FTM_RESP_STAT_DUP = BIT(4), |
| 1874 |
FTM_RESP_STAT_DUP_IN_WIN = BIT(5), |
| 1875 |
FTM_RESP_STAT_DUP_OUT_WIN = BIT(6), |
| 1876 |
FTM_RESP_STAT_SCHED_SUCCESS = BIT(7), |
| 1877 |
FTM_RESP_STAT_ASAP_REQ = BIT(8), |
| 1878 |
FTM_RESP_STAT_NON_ASAP_REQ = BIT(9), |
| 1879 |
FTM_RESP_STAT_ASAP_RESP = BIT(10), |
| 1880 |
FTM_RESP_STAT_NON_ASAP_RESP = BIT(11), |
| 1881 |
FTM_RESP_STAT_FAIL_INITIATOR_INACTIVE = BIT(12), |
| 1882 |
FTM_RESP_STAT_FAIL_INITIATOR_OUT_WIN = BIT(13), |
| 1883 |
FTM_RESP_STAT_FAIL_INITIATOR_RETRY_LIM = BIT(14), |
| 1884 |
FTM_RESP_STAT_FAIL_NEXT_SERVED = BIT(15), |
| 1885 |
FTM_RESP_STAT_FAIL_TRIGGER_ERR = BIT(16), |
| 1886 |
FTM_RESP_STAT_FAIL_GC = BIT(17), |
| 1887 |
FTM_RESP_STAT_SUCCESS = BIT(18), |
| 1888 |
FTM_RESP_STAT_INTEL_IE = BIT(19), |
| 1889 |
FTM_RESP_STAT_INITIATOR_ACTIVE = BIT(20), |
| 1890 |
FTM_RESP_STAT_MEASUREMENTS_AVAILABLE = BIT(21), |
| 1891 |
FTM_RESP_STAT_TRIGGER_UNKNOWN = BIT(22), |
| 1892 |
FTM_RESP_STAT_PROCESS_FAIL = BIT(23), |
| 1893 |
FTM_RESP_STAT_ACK = BIT(24), |
| 1894 |
FTM_RESP_STAT_NACK = BIT(25), |
| 1895 |
FTM_RESP_STAT_INVALID_INITIATOR_ID = BIT(26), |
| 1896 |
FTM_RESP_STAT_TIMER_MIN_DELTA = BIT(27), |
| 1897 |
FTM_RESP_STAT_INITIATOR_REMOVED = BIT(28), |
| 1898 |
FTM_RESP_STAT_INITIATOR_ADDED = BIT(29), |
| 1899 |
FTM_RESP_STAT_ERR_LIST_FULL = BIT(30), |
| 1900 |
FTM_RESP_STAT_INITIATOR_SCHED_NOW = BIT(31), |
| 1901 |
}; /* RESP_IND_E */ |
| 1902 |
|
| 1903 |
/** |
| 1904 |
* struct iwl_ftm_responder_stats - FTM responder statistics |
| 1905 |
* @addr: initiator address |
| 1906 |
* @success_ftm: number of successful ftm frames |
| 1907 |
* @ftm_per_burst: num of FTM frames that were received |
| 1908 |
* @flags: &enum ftm_responder_stats_flags |
| 1909 |
* @duration: actual duration of FTM |
| 1910 |
* @allocated_duration: time that was allocated for this FTM session |
| 1911 |
* @bw: FTM request bandwidth |
| 1912 |
* @rate: FTM request rate |
| 1913 |
* @reserved: for alingment and future use |
| 1914 |
*/ |
| 1915 |
struct iwl_ftm_responder_stats { |
| 1916 |
u8 addr[ETH_ALEN]; |
| 1917 |
u8 success_ftm; |
| 1918 |
u8 ftm_per_burst; |
| 1919 |
__le32 flags; |
| 1920 |
__le32 duration; |
| 1921 |
__le32 allocated_duration; |
| 1922 |
u8 bw; |
| 1923 |
u8 rate; |
| 1924 |
__le16 reserved; |
| 1925 |
} __packed; /* TOF_RESPONDER_STATISTICS_NTFY_S_VER_2 */ |
| 1926 |
|
| 1927 |
#define IWL_CSI_MAX_EXPECTED_CHUNKS 16 |
| 1928 |
|
| 1929 |
#define IWL_CSI_CHUNK_CTL_NUM_MASK_VER_1 0x0003 |
| 1930 |
#define IWL_CSI_CHUNK_CTL_IDX_MASK_VER_1 0x000c |
| 1931 |
|
| 1932 |
#define IWL_CSI_CHUNK_CTL_NUM_MASK_VER_2 0x00ff |
| 1933 |
#define IWL_CSI_CHUNK_CTL_IDX_MASK_VER_2 0xff00 |
| 1934 |
|
| 1935 |
struct iwl_csi_chunk_notification { |
| 1936 |
__le32 token; |
| 1937 |
__le16 seq; |
| 1938 |
__le16 ctl; |
| 1939 |
__le32 size; |
| 1940 |
u8 data[]; |
| 1941 |
} __packed; /* CSI_CHUNKS_HDR_NTFY_API_S_VER_1/VER_2 */ |
| 1942 |
|
| 1943 |
#endif /* __iwl_fw_api_location_h__ */ |