Debian Codegraph @

drivers/net/wireless/intel/iwlwifi/fw/api/mac.h

raw
1 /* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
2 /*
3 * Copyright (C) 2012-2014, 2018-2022, 2024-2025 Intel Corporation
4 * Copyright (C) 2017 Intel Deutschland GmbH
5 */
6 #ifndef __iwl_fw_api_mac_h__
7 #define __iwl_fw_api_mac_h__
8
9 /*
10 * The first MAC indices (starting from 0) are available to the driver,
11 * AUX indices follows - 1 for non-CDB, 2 for CDB.
12 */
13 #define MAC_INDEX_AUX 4
14 #define MAC_INDEX_MIN_DRIVER 0
15 #define NUM_MAC_INDEX_DRIVER MAC_INDEX_AUX
16 #define NUM_MAC_INDEX (NUM_MAC_INDEX_DRIVER + 1)
17 #define NUM_MAC_INDEX_CDB (NUM_MAC_INDEX_DRIVER + 2)
18
19 #define IWL_STATION_COUNT_MAX 16
20 #define IWL_INVALID_STA 0xFF
21
22 enum iwl_ac {
23 AC_BK,
24 AC_BE,
25 AC_VI,
26 AC_VO,
27 AC_NUM,
28 };
29
30 /**
31 * enum iwl_mac_protection_flags - MAC context flags
32 * @MAC_PROT_FLG_TGG_PROTECT: 11g protection when transmitting OFDM frames,
33 * this will require CCK RTS/CTS2self.
34 * RTS/CTS will protect full burst time.
35 * @MAC_PROT_FLG_HT_PROT: enable HT protection
36 * @MAC_PROT_FLG_FAT_PROT: protect 40 MHz transmissions
37 * @MAC_PROT_FLG_SELF_CTS_EN: allow CTS2self
38 */
39 enum iwl_mac_protection_flags {
40 MAC_PROT_FLG_TGG_PROTECT = BIT(3),
41 MAC_PROT_FLG_HT_PROT = BIT(23),
42 MAC_PROT_FLG_FAT_PROT = BIT(24),
43 MAC_PROT_FLG_SELF_CTS_EN = BIT(30),
44 };
45
46 #define MAC_FLG_SHORT_SLOT BIT(4)
47 #define MAC_FLG_SHORT_PREAMBLE BIT(5)
48
49 /**
50 * enum iwl_mac_types - Supported MAC types
51 * @FW_MAC_TYPE_FIRST: lowest supported MAC type
52 * @FW_MAC_TYPE_AUX: Auxiliary MAC (internal)
53 * @FW_MAC_TYPE_LISTENER: monitor MAC type (?)
54 * @FW_MAC_TYPE_PIBSS: Pseudo-IBSS
55 * @FW_MAC_TYPE_IBSS: IBSS
56 * @FW_MAC_TYPE_BSS_STA: BSS (managed) station
57 * @FW_MAC_TYPE_P2P_DEVICE: P2P Device
58 * @FW_MAC_TYPE_P2P_STA: P2P client
59 * @FW_MAC_TYPE_GO: P2P GO
60 * @FW_MAC_TYPE_TEST: ?
61 * @FW_MAC_TYPE_MAX: highest support MAC type
62 */
63 enum iwl_mac_types {
64 FW_MAC_TYPE_FIRST = 1,
65 FW_MAC_TYPE_AUX = FW_MAC_TYPE_FIRST,
66 FW_MAC_TYPE_LISTENER,
67 FW_MAC_TYPE_PIBSS,
68 FW_MAC_TYPE_IBSS,
69 FW_MAC_TYPE_BSS_STA,
70 FW_MAC_TYPE_P2P_DEVICE,
71 FW_MAC_TYPE_P2P_STA,
72 FW_MAC_TYPE_GO,
73 FW_MAC_TYPE_TEST,
74 FW_MAC_TYPE_MAX = FW_MAC_TYPE_TEST
75 }; /* MAC_CONTEXT_TYPE_API_E_VER_1 */
76
77 /**
78 * enum iwl_tsf_id - TSF hw timer ID
79 * @TSF_ID_A: use TSF A
80 * @TSF_ID_B: use TSF B
81 * @TSF_ID_C: use TSF C
82 * @TSF_ID_D: use TSF D
83 * @NUM_TSF_IDS: number of TSF timers available
84 */
85 enum iwl_tsf_id {
86 TSF_ID_A = 0,
87 TSF_ID_B = 1,
88 TSF_ID_C = 2,
89 TSF_ID_D = 3,
90 NUM_TSF_IDS = 4,
91 }; /* TSF_ID_API_E_VER_1 */
92
93 /**
94 * struct iwl_mac_data_ap - configuration data for AP MAC context
95 * @beacon_time: beacon transmit time in system time
96 * @beacon_tsf: beacon transmit time in TSF
97 * @bi: beacon interval in TU
98 * @reserved1: reserved
99 * @dtim_interval: dtim transmit time in TU
100 * @reserved2: reserved
101 * @mcast_qid: queue ID for multicast traffic.
102 * NOTE: obsolete from VER2 and on
103 * @beacon_template: beacon template ID
104 */
105 struct iwl_mac_data_ap {
106 __le32 beacon_time;
107 __le64 beacon_tsf;
108 __le32 bi;
109 __le32 reserved1;
110 __le32 dtim_interval;
111 __le32 reserved2;
112 __le32 mcast_qid;
113 __le32 beacon_template;
114 } __packed; /* AP_MAC_DATA_API_S_VER_2 */
115
116 /**
117 * struct iwl_mac_data_ibss - configuration data for IBSS MAC context
118 * @beacon_time: beacon transmit time in system time
119 * @beacon_tsf: beacon transmit time in TSF
120 * @bi: beacon interval in TU
121 * @reserved: reserved
122 * @beacon_template: beacon template ID
123 */
124 struct iwl_mac_data_ibss {
125 __le32 beacon_time;
126 __le64 beacon_tsf;
127 __le32 bi;
128 __le32 reserved;
129 __le32 beacon_template;
130 } __packed; /* IBSS_MAC_DATA_API_S_VER_1 */
131
132 /**
133 * enum iwl_mac_data_policy - policy of the data path for this MAC
134 * @TWT_SUPPORTED: twt is supported
135 * @MORE_DATA_ACK_SUPPORTED: AP supports More Data Ack according to
136 * paragraph 9.4.1.17 in P802.11ax_D4 specification. Used for TWT
137 * early termination detection.
138 * @FLEXIBLE_TWT_SUPPORTED: AP supports flexible TWT schedule
139 * @PROTECTED_TWT_SUPPORTED: AP supports protected TWT frames (with 11w)
140 * @BROADCAST_TWT_SUPPORTED: AP and STA support broadcast TWT
141 * @COEX_HIGH_PRIORITY_ENABLE: high priority mode for BT coex, to be used
142 * during 802.1X negotiation (and allowed during 4-way-HS)
143 */
144 enum iwl_mac_data_policy {
145 TWT_SUPPORTED = BIT(0),
146 MORE_DATA_ACK_SUPPORTED = BIT(1),
147 FLEXIBLE_TWT_SUPPORTED = BIT(2),
148 PROTECTED_TWT_SUPPORTED = BIT(3),
149 BROADCAST_TWT_SUPPORTED = BIT(4),
150 COEX_HIGH_PRIORITY_ENABLE = BIT(5),
151 };
152
153 /**
154 * struct iwl_mac_data_sta - configuration data for station MAC context
155 * @is_assoc: 1 for associated state, 0 otherwise
156 * @dtim_time: DTIM arrival time in system time
157 * @dtim_tsf: DTIM arrival time in TSF
158 * @bi: beacon interval in TU, applicable only when associated
159 * @reserved1: reserved
160 * @dtim_interval: DTIM interval in TU, applicable only when associated
161 * @data_policy: see &enum iwl_mac_data_policy
162 * @listen_interval: in beacon intervals, applicable only when associated
163 * @assoc_id: unique ID assigned by the AP during association
164 * @assoc_beacon_arrive_time: TSF of first beacon after association
165 */
166 struct iwl_mac_data_sta {
167 __le32 is_assoc;
168 __le32 dtim_time;
169 __le64 dtim_tsf;
170 __le32 bi;
171 __le32 reserved1;
172 __le32 dtim_interval;
173 __le32 data_policy;
174 __le32 listen_interval;
175 __le32 assoc_id;
176 __le32 assoc_beacon_arrive_time;
177 } __packed; /* STA_MAC_DATA_API_S_VER_2 */
178
179 /**
180 * struct iwl_mac_data_go - configuration data for P2P GO MAC context
181 * @ap: iwl_mac_data_ap struct with most config data
182 * @ctwin: client traffic window in TU (period after TBTT when GO is present).
183 * 0 indicates that there is no CT window.
184 * @opp_ps_enabled: indicate that opportunistic PS allowed
185 */
186 struct iwl_mac_data_go {
187 struct iwl_mac_data_ap ap;
188 __le32 ctwin;
189 __le32 opp_ps_enabled;
190 } __packed; /* GO_MAC_DATA_API_S_VER_1 */
191
192 /**
193 * struct iwl_mac_data_p2p_sta - configuration data for P2P client MAC context
194 * @sta: iwl_mac_data_sta struct with most config data
195 * @ctwin: client traffic window in TU (period after TBTT when GO is present).
196 * 0 indicates that there is no CT window.
197 */
198 struct iwl_mac_data_p2p_sta {
199 struct iwl_mac_data_sta sta;
200 __le32 ctwin;
201 } __packed; /* P2P_STA_MAC_DATA_API_S_VER_2 */
202
203 /**
204 * struct iwl_mac_data_pibss - Pseudo IBSS config data
205 * @stats_interval: interval in TU between statistics notifications to host.
206 */
207 struct iwl_mac_data_pibss {
208 __le32 stats_interval;
209 } __packed; /* PIBSS_MAC_DATA_API_S_VER_1 */
210
211 /*
212 * struct iwl_mac_data_p2p_dev - configuration data for the P2P Device MAC
213 * context.
214 * @is_disc_extended: if set to true, P2P Device discoverability is enabled on
215 * other channels as well. This should be to true only in case that the
216 * device is discoverable and there is an active GO. Note that setting this
217 * field when not needed, will increase the number of interrupts and have
218 * effect on the platform power, as this setting opens the Rx filters on
219 * all macs.
220 */
221 struct iwl_mac_data_p2p_dev {
222 __le32 is_disc_extended;
223 } __packed; /* _P2P_DEV_MAC_DATA_API_S_VER_1 */
224
225 /**
226 * enum iwl_mac_filter_flags - MAC context filter flags
227 * @MAC_FILTER_IN_PROMISC: accept all data frames
228 * @MAC_FILTER_IN_CONTROL_AND_MGMT: pass all management and
229 * control frames to the host
230 * @MAC_FILTER_ACCEPT_GRP: accept multicast frames
231 * @MAC_FILTER_DIS_DECRYPT: don't decrypt unicast frames
232 * @MAC_FILTER_DIS_GRP_DECRYPT: don't decrypt multicast frames
233 * @MAC_FILTER_IN_BEACON: transfer foreign BSS's beacons to host
234 * (in station mode when associated)
235 * @MAC_FILTER_OUT_BCAST: filter out all broadcast frames
236 * @MAC_FILTER_IN_CRC32: extract FCS and append it to frames
237 * @MAC_FILTER_IN_PROBE_REQUEST: pass probe requests to host
238 */
239 enum iwl_mac_filter_flags {
240 MAC_FILTER_IN_PROMISC = BIT(0),
241 MAC_FILTER_IN_CONTROL_AND_MGMT = BIT(1),
242 MAC_FILTER_ACCEPT_GRP = BIT(2),
243 MAC_FILTER_DIS_DECRYPT = BIT(3),
244 MAC_FILTER_DIS_GRP_DECRYPT = BIT(4),
245 MAC_FILTER_IN_BEACON = BIT(6),
246 MAC_FILTER_OUT_BCAST = BIT(8),
247 MAC_FILTER_IN_CRC32 = BIT(11),
248 MAC_FILTER_IN_PROBE_REQUEST = BIT(12),
249 /**
250 * @MAC_FILTER_IN_11AX: mark BSS as supporting 802.11ax
251 */
252 MAC_FILTER_IN_11AX = BIT(14),
253 };
254
255 /**
256 * enum iwl_mac_qos_flags - QoS flags
257 * @MAC_QOS_FLG_UPDATE_EDCA: ?
258 * @MAC_QOS_FLG_TGN: HT is enabled
259 * @MAC_QOS_FLG_TXOP_TYPE: ?
260 *
261 */
262 enum iwl_mac_qos_flags {
263 MAC_QOS_FLG_UPDATE_EDCA = BIT(0),
264 MAC_QOS_FLG_TGN = BIT(1),
265 MAC_QOS_FLG_TXOP_TYPE = BIT(4),
266 };
267
268 /**
269 * struct iwl_ac_qos - QOS timing params for MAC_CONTEXT_CMD
270 * @cw_min: Contention window, start value in numbers of slots.
271 * Should be a power-of-2, minus 1. Device's default is 0x0f.
272 * @cw_max: Contention window, max value in numbers of slots.
273 * Should be a power-of-2, minus 1. Device's default is 0x3f.
274 * @aifsn: Number of slots in Arbitration Interframe Space (before
275 * performing random backoff timing prior to Tx). Device default 1.
276 * @fifos_mask: FIFOs used by this MAC for this AC
277 * @edca_txop: Length of Tx opportunity, in uSecs. Device default is 0.
278 *
279 * One instance of this config struct for each of 4 EDCA access categories
280 * in struct iwl_qosparam_cmd.
281 *
282 * Device will automatically increase contention window by (2*CW) + 1 for each
283 * transmission retry. Device uses cw_max as a bit mask, ANDed with new CW
284 * value, to cap the CW value.
285 */
286 struct iwl_ac_qos {
287 __le16 cw_min;
288 __le16 cw_max;
289 u8 aifsn;
290 u8 fifos_mask; /* not in use since _VER_3 */
291 __le16 edca_txop;
292 } __packed; /* AC_QOS_API_S_VER_2, _VER_3 */
293
294 /**
295 * struct iwl_mac_ctx_cmd - command structure to configure MAC contexts
296 * ( MAC_CONTEXT_CMD = 0x28 )
297 * @id_and_color: ID and color of the MAC
298 * @action: action to perform, see &enum iwl_ctxt_action
299 * @mac_type: one of &enum iwl_mac_types
300 * @tsf_id: TSF HW timer, one of &enum iwl_tsf_id
301 * @node_addr: MAC address
302 * @reserved_for_node_addr: reserved
303 * @bssid_addr: BSSID
304 * @reserved_for_bssid_addr: reserved
305 * @cck_rates: basic rates available for CCK
306 * @ofdm_rates: basic rates available for OFDM
307 * @protection_flags: combination of &enum iwl_mac_protection_flags
308 * @cck_short_preamble: 0x20 for enabling short preamble, 0 otherwise
309 * @short_slot: 0x10 for enabling short slots, 0 otherwise
310 * @filter_flags: combination of &enum iwl_mac_filter_flags
311 * @qos_flags: from &enum iwl_mac_qos_flags
312 * @ac: one iwl_mac_qos configuration for each AC
313 * @ap: AP specific config data, see &struct iwl_mac_data_ap
314 * @go: GO specific config data, see &struct iwl_mac_data_go
315 * @sta: BSS client specific config data, see &struct iwl_mac_data_sta
316 * @p2p_sta: P2P client specific config data, see &struct iwl_mac_data_p2p_sta
317 * @p2p_dev: P2P-device specific config data, see &struct iwl_mac_data_p2p_dev
318 * @pibss: Pseudo-IBSS specific data, unused; see struct iwl_mac_data_pibss
319 * @ibss: IBSS specific config data, see &struct iwl_mac_data_ibss
320 */
321 struct iwl_mac_ctx_cmd {
322 /* COMMON_INDEX_HDR_API_S_VER_1 */
323 __le32 id_and_color;
324 __le32 action;
325 /* MAC_CONTEXT_COMMON_DATA_API_S_VER_1 */
326 __le32 mac_type;
327 __le32 tsf_id;
328 u8 node_addr[6];
329 __le16 reserved_for_node_addr;
330 u8 bssid_addr[6];
331 __le16 reserved_for_bssid_addr;
332 __le32 cck_rates;
333 __le32 ofdm_rates;
334 __le32 protection_flags;
335 __le32 cck_short_preamble;
336 __le32 short_slot;
337 __le32 filter_flags;
338 /* MAC_QOS_PARAM_API_S_VER_1 */
339 __le32 qos_flags;
340 struct iwl_ac_qos ac[AC_NUM+1];
341 /* MAC_CONTEXT_COMMON_DATA_API_S */
342 union {
343 struct iwl_mac_data_ap ap;
344 struct iwl_mac_data_go go;
345 struct iwl_mac_data_sta sta;
346 struct iwl_mac_data_p2p_sta p2p_sta;
347 struct iwl_mac_data_p2p_dev p2p_dev;
348 struct iwl_mac_data_pibss pibss;
349 struct iwl_mac_data_ibss ibss;
350 };
351 } __packed; /* MAC_CONTEXT_CMD_API_S_VER_1 */
352
353 #define IWL_NONQOS_SEQ_GET 0x1
354 #define IWL_NONQOS_SEQ_SET 0x2
355 struct iwl_nonqos_seq_query_cmd {
356 __le32 get_set_flag;
357 __le32 mac_id_n_color;
358 __le16 value;
359 __le16 reserved;
360 } __packed; /* NON_QOS_TX_COUNTER_GET_SET_API_S_VER_1 */
361
362 /**
363 * struct iwl_missed_beacons_notif_ver_3 - information on missed beacons
364 * ( MISSED_BEACONS_NOTIFICATION = 0xa2 )
365 * @mac_id: interface ID
366 * @consec_missed_beacons_since_last_rx: number of consecutive missed
367 * beacons since last RX.
368 * @consec_missed_beacons: number of consecutive missed beacons
369 * @num_expected_beacons: number of expected beacons
370 * @num_recvd_beacons: number of received beacons
371 */
372 struct iwl_missed_beacons_notif_ver_3 {
373 __le32 mac_id;
374 __le32 consec_missed_beacons_since_last_rx;
375 __le32 consec_missed_beacons;
376 __le32 num_expected_beacons;
377 __le32 num_recvd_beacons;
378 } __packed; /* MISSED_BEACON_NTFY_API_S_VER_3 */
379
380 /**
381 * struct iwl_missed_beacons_notif_v4 - information on missed beacons
382 * ( MISSED_BEACONS_NOTIFICATION = 0xa2 )
383 * @link_id: fw link ID
384 * @consec_missed_beacons_since_last_rx: number of consecutive missed
385 * beacons since last RX.
386 * @consec_missed_beacons: number of consecutive missed beacons
387 * @num_expected_beacons: number of expected beacons
388 * @num_recvd_beacons: number of received beacons
389 */
390 struct iwl_missed_beacons_notif_v4 {
391 __le32 link_id;
392 __le32 consec_missed_beacons_since_last_rx;
393 __le32 consec_missed_beacons;
394 __le32 num_expected_beacons;
395 __le32 num_recvd_beacons;
396 } __packed; /* MISSED_BEACON_NTFY_API_S_VER_4 */
397
398 /**
399 * struct iwl_he_backoff_conf - used for backoff configuration
400 * Per each trigger-based AC, (set by MU EDCA Parameter set info-element)
401 * used for backoff configuration of TXF5..TXF8 trigger based.
402 * The MU-TIMER is reloaded w/ MU_TIME each time a frame from the AC is sent via
403 * trigger-based TX.
404 * @cwmin: CW min
405 * @cwmax: CW max
406 * @aifsn: AIFSN
407 * AIFSN=0, means that no backoff from the specified TRIG-BASED AC is
408 * allowed till the MU-TIMER is 0
409 * @mu_time: MU time in 8TU units
410 */
411 struct iwl_he_backoff_conf {
412 __le16 cwmin;
413 __le16 cwmax;
414 __le16 aifsn;
415 __le16 mu_time;
416 } __packed; /* AC_QOS_DOT11AX_API_S */
417
418 /**
419 * enum iwl_he_pkt_ext_constellations - PPE constellation indices
420 * @IWL_HE_PKT_EXT_BPSK: BPSK
421 * @IWL_HE_PKT_EXT_QPSK: QPSK
422 * @IWL_HE_PKT_EXT_16QAM: 16-QAM
423 * @IWL_HE_PKT_EXT_64QAM: 64-QAM
424 * @IWL_HE_PKT_EXT_256QAM: 256-QAM
425 * @IWL_HE_PKT_EXT_1024QAM: 1024-QAM
426 * @IWL_HE_PKT_EXT_4096QAM: 4096-QAM, for EHT only
427 * @IWL_HE_PKT_EXT_NONE: not defined
428 */
429 enum iwl_he_pkt_ext_constellations {
430 IWL_HE_PKT_EXT_BPSK = 0,
431 IWL_HE_PKT_EXT_QPSK,
432 IWL_HE_PKT_EXT_16QAM,
433 IWL_HE_PKT_EXT_64QAM,
434 IWL_HE_PKT_EXT_256QAM,
435 IWL_HE_PKT_EXT_1024QAM,
436 IWL_HE_PKT_EXT_4096QAM,
437 IWL_HE_PKT_EXT_NONE,
438 };
439
440 #define MAX_HE_SUPP_NSS 2
441 #define MAX_CHANNEL_BW_INDX_API_D_VER_1 4
442 #define MAX_CHANNEL_BW_INDX_API_D_VER_2 5
443
444 /**
445 * struct iwl_he_pkt_ext_v1 - QAM thresholds
446 * The required PPE is set via HE Capabilities IE, per Nss x BW x MCS
447 * The IE is organized in the following way:
448 * Support for Nss x BW (or RU) matrix:
449 * (0=SISO, 1=MIMO2) x (0-20MHz, 1-40MHz, 2-80MHz, 3-160MHz)
450 * Each entry contains 2 QAM thresholds for 8us and 16us:
451 * 0=BPSK, 1=QPSK, 2=16QAM, 3=64QAM, 4=256QAM, 5=1024QAM, 6=RES, 7=NONE
452 * i.e. QAM_th1 < QAM_th2 such if TX uses QAM_tx:
453 * QAM_tx < QAM_th1 --> PPE=0us
454 * QAM_th1 <= QAM_tx < QAM_th2 --> PPE=8us
455 * QAM_th2 <= QAM_tx --> PPE=16us
456 * @pkt_ext_qam_th: QAM thresholds
457 * For each Nss/Bw define 2 QAM thrsholds (0..5)
458 * For rates below the low_th, no need for PPE
459 * For rates between low_th and high_th, need 8us PPE
460 * For rates equal or higher then the high_th, need 16us PPE
461 * Nss (0-siso, 1-mimo2) x BW (0-20MHz, 1-40MHz, 2-80MHz, 3-160MHz) x
462 * (0-low_th, 1-high_th)
463 */
464 struct iwl_he_pkt_ext_v1 {
465 u8 pkt_ext_qam_th[MAX_HE_SUPP_NSS][MAX_CHANNEL_BW_INDX_API_D_VER_1][2];
466 } __packed; /* PKT_EXT_DOT11AX_API_S_VER_1 */
467
468 /**
469 * struct iwl_he_pkt_ext_v2 - QAM thresholds
470 * The required PPE is set via HE Capabilities IE, per Nss x BW x MCS
471 * The IE is organized in the following way:
472 * Support for Nss x BW (or RU) matrix:
473 * (0=SISO, 1=MIMO2) x (0-20MHz, 1-40MHz, 2-80MHz, 3-160MHz)
474 * Each entry contains 2 QAM thresholds for 8us and 16us:
475 * 0=BPSK, 1=QPSK, 2=16QAM, 3=64QAM, 4=256QAM, 5=1024QAM, 6=RES, 7=NONE
476 * i.e. QAM_th1 < QAM_th2 such if TX uses QAM_tx:
477 * QAM_tx < QAM_th1 --> PPE=0us
478 * QAM_th1 <= QAM_tx < QAM_th2 --> PPE=8us
479 * QAM_th2 <= QAM_tx --> PPE=16us
480 * @pkt_ext_qam_th: QAM thresholds
481 * For each Nss/Bw define 2 QAM thrsholds (0..5)
482 * For rates below the low_th, no need for PPE
483 * For rates between low_th and high_th, need 8us PPE
484 * For rates equal or higher then the high_th, need 16us PPE
485 * Nss (0-siso, 1-mimo2) x
486 * BW (0-20MHz, 1-40MHz, 2-80MHz, 3-160MHz, 4-320MHz) x
487 * (0-low_th, 1-high_th)
488 */
489 struct iwl_he_pkt_ext_v2 {
490 u8 pkt_ext_qam_th[MAX_HE_SUPP_NSS][MAX_CHANNEL_BW_INDX_API_D_VER_2][2];
491 } __packed; /* PKT_EXT_DOT11AX_API_S_VER_2 */
492
493 /**
494 * enum iwl_he_sta_ctxt_flags - HE STA context flags
495 * @STA_CTXT_HE_REF_BSSID_VALID: ref bssid addr valid (for receiving specific
496 * control frames such as TRIG, NDPA, BACK)
497 * @STA_CTXT_HE_BSS_COLOR_DIS: BSS color disable, don't use the BSS
498 * color for RX filter but use MAC header
499 * @STA_CTXT_HE_PARTIAL_BSS_COLOR: partial BSS color allocation
500 * @STA_CTXT_HE_32BIT_BA_BITMAP: indicates the receiver supports BA bitmap
501 * of 32-bits
502 * @STA_CTXT_HE_PACKET_EXT: indicates that the packet-extension info is valid
503 * and should be used
504 * @STA_CTXT_HE_TRIG_RND_ALLOC: indicates that trigger based random allocation
505 * is enabled according to UORA element existence
506 * @STA_CTXT_HE_CONST_TRIG_RND_ALLOC: used for AV testing
507 * @STA_CTXT_HE_ACK_ENABLED: indicates that the AP supports receiving ACK-
508 * enabled AGG, i.e. both BACK and non-BACK frames in a single AGG
509 * @STA_CTXT_HE_MU_EDCA_CW: indicates that there is an element of MU EDCA
510 * parameter set, i.e. the backoff counters for trig-based ACs
511 * @STA_CTXT_HE_NIC_NOT_ACK_ENABLED: mark that the NIC doesn't support receiving
512 * ACK-enabled AGG, (i.e. both BACK and non-BACK frames in single AGG).
513 * If the NIC is not ACK_ENABLED it may use the EOF-bit in first non-0
514 * len delim to determine if AGG or single.
515 * @STA_CTXT_HE_RU_2MHZ_BLOCK: indicates that 26-tone RU OFDMA transmission are
516 * not allowed (as there are OBSS that might classify such transmissions as
517 * radar pulses).
518 * @STA_CTXT_HE_NDP_FEEDBACK_ENABLED: mark support for NDP feedback and change
519 * of threshold
520 * @STA_CTXT_EHT_PUNCTURE_MASK_VALID: indicates the puncture_mask field is valid
521 * @STA_CTXT_EHT_LONG_PPE_ENABLED: indicates the PPE requirement should be
522 * extended to 20us for BW > 160Mhz or for MCS w/ 4096-QAM.
523 */
524 enum iwl_he_sta_ctxt_flags {
525 STA_CTXT_HE_REF_BSSID_VALID = BIT(4),
526 STA_CTXT_HE_BSS_COLOR_DIS = BIT(5),
527 STA_CTXT_HE_PARTIAL_BSS_COLOR = BIT(6),
528 STA_CTXT_HE_32BIT_BA_BITMAP = BIT(7),
529 STA_CTXT_HE_PACKET_EXT = BIT(8),
530 STA_CTXT_HE_TRIG_RND_ALLOC = BIT(9),
531 STA_CTXT_HE_CONST_TRIG_RND_ALLOC = BIT(10),
532 STA_CTXT_HE_ACK_ENABLED = BIT(11),
533 STA_CTXT_HE_MU_EDCA_CW = BIT(12),
534 STA_CTXT_HE_NIC_NOT_ACK_ENABLED = BIT(13),
535 STA_CTXT_HE_RU_2MHZ_BLOCK = BIT(14),
536 STA_CTXT_HE_NDP_FEEDBACK_ENABLED = BIT(15),
537 STA_CTXT_EHT_PUNCTURE_MASK_VALID = BIT(16),
538 STA_CTXT_EHT_LONG_PPE_ENABLED = BIT(17),
539 };
540
541 /**
542 * enum iwl_he_htc_flags - HE HTC support flags
543 * @IWL_HE_HTC_SUPPORT: HE-HTC support
544 * @IWL_HE_HTC_UL_MU_RESP_SCHED: HE UL MU response schedule
545 * support via A-control field
546 * @IWL_HE_HTC_BSR_SUPP: BSR support in A-control field
547 * @IWL_HE_HTC_OMI_SUPP: A-OMI support in A-control field
548 * @IWL_HE_HTC_BQR_SUPP: A-BQR support in A-control field
549 */
550 enum iwl_he_htc_flags {
551 IWL_HE_HTC_SUPPORT = BIT(0),
552 IWL_HE_HTC_UL_MU_RESP_SCHED = BIT(3),
553 IWL_HE_HTC_BSR_SUPP = BIT(4),
554 IWL_HE_HTC_OMI_SUPP = BIT(5),
555 IWL_HE_HTC_BQR_SUPP = BIT(6),
556 };
557
558 /*
559 * @IWL_HE_HTC_LINK_ADAP_NO_FEEDBACK: the STA does not provide HE MFB
560 * @IWL_HE_HTC_LINK_ADAP_UNSOLICITED: the STA provides only unsolicited HE MFB
561 * @IWL_HE_HTC_LINK_ADAP_BOTH: the STA is capable of providing HE MFB in
562 * response to HE MRQ and if the STA provides unsolicited HE MFB
563 */
564 #define IWL_HE_HTC_LINK_ADAP_POS (1)
565 #define IWL_HE_HTC_LINK_ADAP_NO_FEEDBACK (0)
566 #define IWL_HE_HTC_LINK_ADAP_UNSOLICITED (2 << IWL_HE_HTC_LINK_ADAP_POS)
567 #define IWL_HE_HTC_LINK_ADAP_BOTH (3 << IWL_HE_HTC_LINK_ADAP_POS)
568
569 /**
570 * struct iwl_he_sta_context_cmd_v1 - configure FW to work with HE AP
571 * @sta_id: STA id
572 * @tid_limit: max num of TIDs in TX HE-SU multi-TID agg
573 * 0 - bad value, 1 - multi-tid not supported, 2..8 - tid limit
574 * @reserved1: reserved byte for future use
575 * @reserved2: reserved byte for future use
576 * @flags: see %iwl_11ax_sta_ctxt_flags
577 * @ref_bssid_addr: reference BSSID used by the AP
578 * @reserved0: reserved 2 bytes for aligning the ref_bssid_addr field to 8 bytes
579 * @htc_flags: which features are supported in HTC
580 * @frag_flags: frag support in A-MSDU
581 * @frag_level: frag support level
582 * @frag_max_num: max num of "open" MSDUs in the receiver (in power of 2)
583 * @frag_min_size: min frag size (except last frag)
584 * @pkt_ext: optional, exists according to PPE-present bit in the HE-PHY capa
585 * @bss_color: 11ax AP ID that is used in the HE SIG-A to mark inter BSS frame
586 * @htc_trig_based_pkt_ext: default PE in 4us units
587 * @frame_time_rts_th: HE duration RTS threshold, in units of 32us
588 * @rand_alloc_ecwmin: random CWmin = 2**ECWmin-1
589 * @rand_alloc_ecwmax: random CWmax = 2**ECWmax-1
590 * @reserved3: reserved byte for future use
591 * @trig_based_txf: MU EDCA Parameter set for the trigger based traffic queues
592 */
593 struct iwl_he_sta_context_cmd_v1 {
594 u8 sta_id;
595 u8 tid_limit;
596 u8 reserved1;
597 u8 reserved2;
598 __le32 flags;
599
600 /* The below fields are set via Multiple BSSID IE */
601 u8 ref_bssid_addr[6];
602 __le16 reserved0;
603
604 /* The below fields are set via HE-capabilities IE */
605 __le32 htc_flags;
606
607 u8 frag_flags;
608 u8 frag_level;
609 u8 frag_max_num;
610 u8 frag_min_size;
611
612 /* The below fields are set via PPE thresholds element */
613 struct iwl_he_pkt_ext_v1 pkt_ext;
614
615 /* The below fields are set via HE-Operation IE */
616 u8 bss_color;
617 u8 htc_trig_based_pkt_ext;
618 __le16 frame_time_rts_th;
619
620 /* Random access parameter set (i.e. RAPS) */
621 u8 rand_alloc_ecwmin;
622 u8 rand_alloc_ecwmax;
623 __le16 reserved3;
624
625 /* The below fields are set via MU EDCA parameter set element */
626 struct iwl_he_backoff_conf trig_based_txf[AC_NUM];
627 } __packed; /* STA_CONTEXT_DOT11AX_API_S_VER_1 */
628
629 /**
630 * struct iwl_he_sta_context_cmd_v2 - configure FW to work with HE AP
631 * @sta_id: STA id
632 * @tid_limit: max num of TIDs in TX HE-SU multi-TID agg
633 * 0 - bad value, 1 - multi-tid not supported, 2..8 - tid limit
634 * @reserved1: reserved byte for future use
635 * @reserved2: reserved byte for future use
636 * @flags: see %iwl_11ax_sta_ctxt_flags
637 * @ref_bssid_addr: reference BSSID used by the AP
638 * @reserved0: reserved 2 bytes for aligning the ref_bssid_addr field to 8 bytes
639 * @htc_flags: which features are supported in HTC
640 * @frag_flags: frag support in A-MSDU
641 * @frag_level: frag support level
642 * @frag_max_num: max num of "open" MSDUs in the receiver (in power of 2)
643 * @frag_min_size: min frag size (except last frag)
644 * @pkt_ext: optional, exists according to PPE-present bit in the HE-PHY capa
645 * @bss_color: 11ax AP ID that is used in the HE SIG-A to mark inter BSS frame
646 * @htc_trig_based_pkt_ext: default PE in 4us units
647 * @frame_time_rts_th: HE duration RTS threshold, in units of 32us
648 * @rand_alloc_ecwmin: random CWmin = 2**ECWmin-1
649 * @rand_alloc_ecwmax: random CWmax = 2**ECWmax-1
650 * @reserved3: reserved byte for future use
651 * @trig_based_txf: MU EDCA Parameter set for the trigger based traffic queues
652 * @max_bssid_indicator: indicator of the max bssid supported on the associated
653 * bss
654 * @bssid_index: index of the associated VAP
655 * @ema_ap: AP supports enhanced Multi BSSID advertisement
656 * @profile_periodicity: number of Beacon periods that are needed to receive the
657 * complete VAPs info
658 * @bssid_count: actual number of VAPs in the MultiBSS Set
659 * @reserved4: alignment
660 */
661 struct iwl_he_sta_context_cmd_v2 {
662 u8 sta_id;
663 u8 tid_limit;
664 u8 reserved1;
665 u8 reserved2;
666 __le32 flags;
667
668 /* The below fields are set via Multiple BSSID IE */
669 u8 ref_bssid_addr[6];
670 __le16 reserved0;
671
672 /* The below fields are set via HE-capabilities IE */
673 __le32 htc_flags;
674
675 u8 frag_flags;
676 u8 frag_level;
677 u8 frag_max_num;
678 u8 frag_min_size;
679
680 /* The below fields are set via PPE thresholds element */
681 struct iwl_he_pkt_ext_v1 pkt_ext;
682
683 /* The below fields are set via HE-Operation IE */
684 u8 bss_color;
685 u8 htc_trig_based_pkt_ext;
686 __le16 frame_time_rts_th;
687
688 /* Random access parameter set (i.e. RAPS) */
689 u8 rand_alloc_ecwmin;
690 u8 rand_alloc_ecwmax;
691 __le16 reserved3;
692
693 /* The below fields are set via MU EDCA parameter set element */
694 struct iwl_he_backoff_conf trig_based_txf[AC_NUM];
695
696 u8 max_bssid_indicator;
697 u8 bssid_index;
698 u8 ema_ap;
699 u8 profile_periodicity;
700 u8 bssid_count;
701 u8 reserved4[3];
702 } __packed; /* STA_CONTEXT_DOT11AX_API_S_VER_2 */
703
704 /**
705 * struct iwl_he_sta_context_cmd_v3 - configure FW to work with HE AP
706 * @sta_id: STA id
707 * @tid_limit: max num of TIDs in TX HE-SU multi-TID agg
708 * 0 - bad value, 1 - multi-tid not supported, 2..8 - tid limit
709 * @reserved1: reserved byte for future use
710 * @reserved2: reserved byte for future use
711 * @flags: see %iwl_11ax_sta_ctxt_flags
712 * @ref_bssid_addr: reference BSSID used by the AP
713 * @reserved0: reserved 2 bytes for aligning the ref_bssid_addr field to 8 bytes
714 * @htc_flags: which features are supported in HTC
715 * @frag_flags: frag support in A-MSDU
716 * @frag_level: frag support level
717 * @frag_max_num: max num of "open" MSDUs in the receiver (in power of 2)
718 * @frag_min_size: min frag size (except last frag)
719 * @pkt_ext: optional, exists according to PPE-present bit in the HE-PHY capa
720 * @bss_color: 11ax AP ID that is used in the HE SIG-A to mark inter BSS frame
721 * @htc_trig_based_pkt_ext: default PE in 4us units
722 * @frame_time_rts_th: HE duration RTS threshold, in units of 32us
723 * @rand_alloc_ecwmin: random CWmin = 2**ECWmin-1
724 * @rand_alloc_ecwmax: random CWmax = 2**ECWmax-1
725 * @puncture_mask: puncture mask for EHT
726 * @trig_based_txf: MU EDCA Parameter set for the trigger based traffic queues
727 * @max_bssid_indicator: indicator of the max bssid supported on the associated
728 * bss
729 * @bssid_index: index of the associated VAP
730 * @ema_ap: AP supports enhanced Multi BSSID advertisement
731 * @profile_periodicity: number of Beacon periods that are needed to receive the
732 * complete VAPs info
733 * @bssid_count: actual number of VAPs in the MultiBSS Set
734 * @reserved4: alignment
735 */
736 struct iwl_he_sta_context_cmd_v3 {
737 u8 sta_id;
738 u8 tid_limit;
739 u8 reserved1;
740 u8 reserved2;
741 __le32 flags;
742
743 /* The below fields are set via Multiple BSSID IE */
744 u8 ref_bssid_addr[6];
745 __le16 reserved0;
746
747 /* The below fields are set via HE-capabilities IE */
748 __le32 htc_flags;
749
750 u8 frag_flags;
751 u8 frag_level;
752 u8 frag_max_num;
753 u8 frag_min_size;
754
755 /* The below fields are set via PPE thresholds element */
756 struct iwl_he_pkt_ext_v2 pkt_ext;
757
758 /* The below fields are set via HE-Operation IE */
759 u8 bss_color;
760 u8 htc_trig_based_pkt_ext;
761 __le16 frame_time_rts_th;
762
763 /* Random access parameter set (i.e. RAPS) */
764 u8 rand_alloc_ecwmin;
765 u8 rand_alloc_ecwmax;
766 __le16 puncture_mask;
767
768 /* The below fields are set via MU EDCA parameter set element */
769 struct iwl_he_backoff_conf trig_based_txf[AC_NUM];
770
771 u8 max_bssid_indicator;
772 u8 bssid_index;
773 u8 ema_ap;
774 u8 profile_periodicity;
775 u8 bssid_count;
776 u8 reserved4[3];
777 } __packed; /* STA_CONTEXT_DOT11AX_API_S_VER_2 */
778
779 /**
780 * struct iwl_he_monitor_cmd - configure air sniffer for HE
781 * @bssid: the BSSID to sniff for
782 * @reserved1: reserved for dword alignment
783 * @aid: the AID to track on for HE MU
784 * @reserved2: reserved for future use
785 */
786 struct iwl_he_monitor_cmd {
787 u8 bssid[6];
788 __le16 reserved1;
789 __le16 aid;
790 u8 reserved2[6];
791 } __packed; /* HE_AIR_SNIFFER_CONFIG_CMD_API_S_VER_1 */
792
793 #endif /* __iwl_fw_api_mac_h__ */