| 1 |
/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ |
| 2 |
/* |
| 3 |
* Copyright (C) 2012-2014, 2018-2019, 2021-2025 Intel Corporation |
| 4 |
* Copyright (C) 2013-2015 Intel Mobile Communications GmbH |
| 5 |
* Copyright (C) 2016-2017 Intel Deutschland GmbH |
| 6 |
*/ |
| 7 |
#ifndef __iwl_fw_api_mac_cfg_h__ |
| 8 |
#define __iwl_fw_api_mac_cfg_h__ |
| 9 |
|
| 10 |
#include "mac.h" |
| 11 |
|
| 12 |
/** |
| 13 |
* enum iwl_mac_conf_subcmd_ids - mac configuration command IDs |
| 14 |
*/ |
| 15 |
enum iwl_mac_conf_subcmd_ids { |
| 16 |
/** |
| 17 |
* @LOW_LATENCY_CMD: &struct iwl_mac_low_latency_cmd |
| 18 |
*/ |
| 19 |
LOW_LATENCY_CMD = 0x3, |
| 20 |
/** |
| 21 |
* @CHANNEL_SWITCH_TIME_EVENT_CMD: &struct iwl_chan_switch_te_cmd |
| 22 |
*/ |
| 23 |
CHANNEL_SWITCH_TIME_EVENT_CMD = 0x4, |
| 24 |
/** |
| 25 |
* @MISSED_VAP_NOTIF: &struct iwl_missed_vap_notif |
| 26 |
*/ |
| 27 |
MISSED_VAP_NOTIF = 0xFA, |
| 28 |
/** |
| 29 |
* @SESSION_PROTECTION_CMD: &struct iwl_mvm_session_prot_cmd |
| 30 |
*/ |
| 31 |
SESSION_PROTECTION_CMD = 0x5, |
| 32 |
/** |
| 33 |
* @CANCEL_CHANNEL_SWITCH_CMD: &struct iwl_cancel_channel_switch_cmd |
| 34 |
*/ |
| 35 |
CANCEL_CHANNEL_SWITCH_CMD = 0x6, |
| 36 |
/** |
| 37 |
* @MAC_CONFIG_CMD: &struct iwl_mac_config_cmd |
| 38 |
*/ |
| 39 |
MAC_CONFIG_CMD = 0x8, |
| 40 |
/** |
| 41 |
* @LINK_CONFIG_CMD: &struct iwl_link_config_cmd |
| 42 |
*/ |
| 43 |
LINK_CONFIG_CMD = 0x9, |
| 44 |
/** |
| 45 |
* @STA_CONFIG_CMD: &struct iwl_sta_cfg_cmd |
| 46 |
*/ |
| 47 |
STA_CONFIG_CMD = 0xA, |
| 48 |
/** |
| 49 |
* @AUX_STA_CMD: &struct iwl_aux_sta_cmd |
| 50 |
*/ |
| 51 |
AUX_STA_CMD = 0xB, |
| 52 |
/** |
| 53 |
* @STA_REMOVE_CMD: &struct iwl_remove_sta_cmd |
| 54 |
*/ |
| 55 |
STA_REMOVE_CMD = 0xC, |
| 56 |
/** |
| 57 |
* @STA_DISABLE_TX_CMD: &struct iwl_mvm_sta_disable_tx_cmd |
| 58 |
*/ |
| 59 |
STA_DISABLE_TX_CMD = 0xD, |
| 60 |
/** |
| 61 |
* @ROC_CMD: &struct iwl_roc_req |
| 62 |
*/ |
| 63 |
ROC_CMD = 0xE, |
| 64 |
/** |
| 65 |
* @TWT_OPERATION_CMD: &struct iwl_twt_operation_cmd |
| 66 |
*/ |
| 67 |
TWT_OPERATION_CMD = 0x10, |
| 68 |
/** |
| 69 |
* @NAN_CFG_CMD: &struct iwl_nan_config_cmd |
| 70 |
*/ |
| 71 |
NAN_CFG_CMD = 0x12, |
| 72 |
/** |
| 73 |
* @NAN_DW_END_NOTIF: &struct iwl_nan_dw_end_notif |
| 74 |
*/ |
| 75 |
NAN_DW_END_NOTIF = 0xf4, |
| 76 |
/** |
| 77 |
* @NAN_JOINED_CLUSTER_NOTIF: &struct iwl_nan_cluster_notif |
| 78 |
*/ |
| 79 |
NAN_JOINED_CLUSTER_NOTIF = 0xf5, |
| 80 |
/** |
| 81 |
* @MISSED_BEACONS_NOTIF: &struct iwl_missed_beacons_notif |
| 82 |
*/ |
| 83 |
MISSED_BEACONS_NOTIF = 0xF6, |
| 84 |
/** |
| 85 |
* @EMLSR_TRANS_FAIL_NOTIF: &struct iwl_esr_trans_fail_notif |
| 86 |
*/ |
| 87 |
EMLSR_TRANS_FAIL_NOTIF = 0xF7, |
| 88 |
/** |
| 89 |
* @ROC_NOTIF: &struct iwl_roc_notif |
| 90 |
*/ |
| 91 |
ROC_NOTIF = 0xF8, |
| 92 |
/** |
| 93 |
* @SESSION_PROTECTION_NOTIF: &struct iwl_session_prot_notif |
| 94 |
*/ |
| 95 |
SESSION_PROTECTION_NOTIF = 0xFB, |
| 96 |
|
| 97 |
/** |
| 98 |
* @PROBE_RESPONSE_DATA_NOTIF: &struct iwl_probe_resp_data_notif |
| 99 |
*/ |
| 100 |
PROBE_RESPONSE_DATA_NOTIF = 0xFC, |
| 101 |
|
| 102 |
/** |
| 103 |
* @CHANNEL_SWITCH_START_NOTIF: &struct iwl_channel_switch_start_notif |
| 104 |
*/ |
| 105 |
CHANNEL_SWITCH_START_NOTIF = 0xFF, |
| 106 |
|
| 107 |
/** |
| 108 |
*@CHANNEL_SWITCH_ERROR_NOTIF: &struct iwl_channel_switch_error_notif |
| 109 |
*/ |
| 110 |
CHANNEL_SWITCH_ERROR_NOTIF = 0xF9, |
| 111 |
}; |
| 112 |
|
| 113 |
#define IWL_P2P_NOA_DESC_COUNT (2) |
| 114 |
|
| 115 |
/** |
| 116 |
* struct iwl_p2p_noa_attr - NOA attr contained in probe resp FW notification |
| 117 |
* |
| 118 |
* @id: attribute id |
| 119 |
* @len_low: length low half |
| 120 |
* @len_high: length high half |
| 121 |
* @idx: instance of NoA timing |
| 122 |
* @ctwin: GO's ct window and pwer save capability |
| 123 |
* @desc: NoA descriptor |
| 124 |
* @reserved: reserved for alignment purposes |
| 125 |
*/ |
| 126 |
struct iwl_p2p_noa_attr { |
| 127 |
u8 id; |
| 128 |
u8 len_low; |
| 129 |
u8 len_high; |
| 130 |
u8 idx; |
| 131 |
u8 ctwin; |
| 132 |
struct ieee80211_p2p_noa_desc desc[IWL_P2P_NOA_DESC_COUNT]; |
| 133 |
u8 reserved; |
| 134 |
} __packed; |
| 135 |
|
| 136 |
#define IWL_PROBE_RESP_DATA_NO_CSA (0xff) |
| 137 |
|
| 138 |
/** |
| 139 |
* struct iwl_probe_resp_data_notif - notification with NOA and CSA counter |
| 140 |
* |
| 141 |
* @mac_id: the mac which should send the probe response |
| 142 |
* @noa_active: notifies if the noa attribute should be handled |
| 143 |
* @noa_attr: P2P NOA attribute |
| 144 |
* @csa_counter: current csa counter |
| 145 |
* @reserved: reserved for alignment purposes |
| 146 |
*/ |
| 147 |
struct iwl_probe_resp_data_notif { |
| 148 |
__le32 mac_id; |
| 149 |
__le32 noa_active; |
| 150 |
struct iwl_p2p_noa_attr noa_attr; |
| 151 |
u8 csa_counter; |
| 152 |
u8 reserved[3]; |
| 153 |
} __packed; /* PROBE_RESPONSE_DATA_NTFY_API_S_VER_1 */ |
| 154 |
|
| 155 |
/** |
| 156 |
* struct iwl_missed_vap_notif - notification of missing vap detection |
| 157 |
* |
| 158 |
* @mac_id: the mac for which the ucode sends the notification for |
| 159 |
* @num_beacon_intervals_elapsed: beacons elpased with no vap profile inside |
| 160 |
* @profile_periodicity: beacons period to have our profile inside |
| 161 |
* @reserved: reserved for alignment purposes |
| 162 |
*/ |
| 163 |
struct iwl_missed_vap_notif { |
| 164 |
__le32 mac_id; |
| 165 |
u8 num_beacon_intervals_elapsed; |
| 166 |
u8 profile_periodicity; |
| 167 |
u8 reserved[2]; |
| 168 |
} __packed; /* MISSED_VAP_NTFY_API_S_VER_1 */ |
| 169 |
|
| 170 |
/** |
| 171 |
* struct iwl_channel_switch_start_notif_v1 - Channel switch start notification |
| 172 |
* |
| 173 |
* @id_and_color: ID and color of the MAC |
| 174 |
*/ |
| 175 |
struct iwl_channel_switch_start_notif_v1 { |
| 176 |
__le32 id_and_color; |
| 177 |
} __packed; /* CHANNEL_SWITCH_START_NTFY_API_S_VER_1 */ |
| 178 |
|
| 179 |
/** |
| 180 |
* struct iwl_channel_switch_start_notif - Channel switch start notification |
| 181 |
* |
| 182 |
* @link_id: FW link id |
| 183 |
*/ |
| 184 |
struct iwl_channel_switch_start_notif { |
| 185 |
__le32 link_id; |
| 186 |
} __packed; /* CHANNEL_SWITCH_START_NTFY_API_S_VER_3 */ |
| 187 |
|
| 188 |
#define CS_ERR_COUNT_ERROR BIT(0) |
| 189 |
#define CS_ERR_LONG_DELAY_AFTER_CS BIT(1) |
| 190 |
#define CS_ERR_LONG_TX_BLOCK BIT(2) |
| 191 |
#define CS_ERR_TX_BLOCK_TIMER_EXPIRED BIT(3) |
| 192 |
|
| 193 |
/** |
| 194 |
* struct iwl_channel_switch_error_notif_v1 - Channel switch error notification |
| 195 |
* |
| 196 |
* @mac_id: the mac for which the ucode sends the notification for |
| 197 |
* @csa_err_mask: mask of channel switch error that can occur |
| 198 |
*/ |
| 199 |
struct iwl_channel_switch_error_notif_v1 { |
| 200 |
__le32 mac_id; |
| 201 |
__le32 csa_err_mask; |
| 202 |
} __packed; /* CHANNEL_SWITCH_ERROR_NTFY_API_S_VER_1 */ |
| 203 |
|
| 204 |
/** |
| 205 |
* struct iwl_channel_switch_error_notif - Channel switch error notification |
| 206 |
* |
| 207 |
* @link_id: FW link id |
| 208 |
* @csa_err_mask: mask of channel switch error that can occur |
| 209 |
*/ |
| 210 |
struct iwl_channel_switch_error_notif { |
| 211 |
__le32 link_id; |
| 212 |
__le32 csa_err_mask; |
| 213 |
} __packed; /* CHANNEL_SWITCH_ERROR_NTFY_API_S_VER_2 */ |
| 214 |
|
| 215 |
/** |
| 216 |
* struct iwl_cancel_channel_switch_cmd - Cancel Channel Switch command |
| 217 |
* |
| 218 |
* @id: the id of the link or mac that should cancel the channel switch |
| 219 |
*/ |
| 220 |
struct iwl_cancel_channel_switch_cmd { |
| 221 |
__le32 id; |
| 222 |
} __packed; /* MAC_CANCEL_CHANNEL_SWITCH_S_VER_1 */ |
| 223 |
|
| 224 |
/** |
| 225 |
* struct iwl_chan_switch_te_cmd - Channel Switch Time Event command |
| 226 |
* |
| 227 |
* @mac_id: MAC ID for channel switch |
| 228 |
* @action: action to perform, see &enum iwl_ctxt_action |
| 229 |
* @tsf: beacon tsf |
| 230 |
* @cs_count: channel switch count from CSA/eCSA IE |
| 231 |
* @cs_delayed_bcn_count: if set to N (!= 0) GO/AP can delay N beacon intervals |
| 232 |
* at the new channel after the channel switch, otherwise (N == 0) expect |
| 233 |
* beacon right after the channel switch. |
| 234 |
* @cs_mode: 1 - quiet, 0 - otherwise |
| 235 |
* @reserved: reserved for alignment purposes |
| 236 |
*/ |
| 237 |
struct iwl_chan_switch_te_cmd { |
| 238 |
__le32 mac_id; |
| 239 |
__le32 action; |
| 240 |
__le32 tsf; |
| 241 |
u8 cs_count; |
| 242 |
u8 cs_delayed_bcn_count; |
| 243 |
u8 cs_mode; |
| 244 |
u8 reserved; |
| 245 |
} __packed; /* MAC_CHANNEL_SWITCH_TIME_EVENT_S_VER_2 */ |
| 246 |
|
| 247 |
/** |
| 248 |
* struct iwl_mac_low_latency_cmd - set/clear mac to 'low-latency mode' |
| 249 |
* |
| 250 |
* @mac_id: MAC ID to whom to apply the low-latency configurations |
| 251 |
* @low_latency_rx: 1/0 to set/clear Rx low latency direction |
| 252 |
* @low_latency_tx: 1/0 to set/clear Tx low latency direction |
| 253 |
* @reserved: reserved for alignment purposes |
| 254 |
*/ |
| 255 |
struct iwl_mac_low_latency_cmd { |
| 256 |
__le32 mac_id; |
| 257 |
u8 low_latency_rx; |
| 258 |
u8 low_latency_tx; |
| 259 |
__le16 reserved; |
| 260 |
} __packed; /* MAC_LOW_LATENCY_API_S_VER_1 */ |
| 261 |
|
| 262 |
/** |
| 263 |
* struct iwl_mac_client_data - configuration data for client MAC context |
| 264 |
* |
| 265 |
* @is_assoc: 1 for associated state, 0 otherwise |
| 266 |
* @esr_transition_timeout: the timeout required by the AP for the |
| 267 |
* eSR transition. |
| 268 |
* Available only from version 2 of the command. |
| 269 |
* This value comes from the EMLSR transition delay in the EML |
| 270 |
* Capabilities subfield. |
| 271 |
* @medium_sync_delay: the value as it appears in P802.11be_D2.2 Figure 9-1002j. |
| 272 |
* @assoc_id: unique ID assigned by the AP during association |
| 273 |
* @reserved1: alignment |
| 274 |
* @data_policy: see &enum iwl_mac_data_policy |
| 275 |
* @reserved2: alignment |
| 276 |
* @ctwin: client traffic window in TU (period after TBTT when GO is present). |
| 277 |
* 0 indicates that there is no CT window. |
| 278 |
*/ |
| 279 |
struct iwl_mac_client_data { |
| 280 |
u8 is_assoc; |
| 281 |
u8 esr_transition_timeout; |
| 282 |
__le16 medium_sync_delay; |
| 283 |
|
| 284 |
__le16 assoc_id; |
| 285 |
__le16 reserved1; |
| 286 |
__le16 data_policy; |
| 287 |
__le16 reserved2; |
| 288 |
__le32 ctwin; |
| 289 |
} __packed; /* MAC_CONTEXT_CONFIG_CLIENT_DATA_API_S_VER_2 */ |
| 290 |
|
| 291 |
/** |
| 292 |
* struct iwl_mac_p2p_dev_data - configuration data for P2P device MAC context |
| 293 |
* |
| 294 |
* @is_disc_extended: if set to true, P2P Device discoverability is enabled on |
| 295 |
* other channels as well. This should be to true only in case that the |
| 296 |
* device is discoverable and there is an active GO. Note that setting this |
| 297 |
* field when not needed, will increase the number of interrupts and have |
| 298 |
* effect on the platform power, as this setting opens the Rx filters on |
| 299 |
* all macs. |
| 300 |
*/ |
| 301 |
struct iwl_mac_p2p_dev_data { |
| 302 |
__le32 is_disc_extended; |
| 303 |
} __packed; /* MAC_CONTEXT_CONFIG_P2P_DEV_DATA_API_S_VER_1 */ |
| 304 |
|
| 305 |
/** |
| 306 |
* enum iwl_mac_config_filter_flags - MAC context configuration filter flags |
| 307 |
* |
| 308 |
* @MAC_CFG_FILTER_PROMISC: accept all data frames |
| 309 |
* @MAC_CFG_FILTER_ACCEPT_CONTROL_AND_MGMT: pass all management and |
| 310 |
* control frames to the host |
| 311 |
* @MAC_CFG_FILTER_ACCEPT_GRP: accept multicast frames |
| 312 |
* @MAC_CFG_FILTER_ACCEPT_BEACON: accept beacon frames |
| 313 |
* @MAC_CFG_FILTER_ACCEPT_BCAST_PROBE_RESP: accept broadcast probe response |
| 314 |
* @MAC_CFG_FILTER_ACCEPT_PROBE_REQ: accept probe requests |
| 315 |
*/ |
| 316 |
enum iwl_mac_config_filter_flags { |
| 317 |
MAC_CFG_FILTER_PROMISC = BIT(0), |
| 318 |
MAC_CFG_FILTER_ACCEPT_CONTROL_AND_MGMT = BIT(1), |
| 319 |
MAC_CFG_FILTER_ACCEPT_GRP = BIT(2), |
| 320 |
MAC_CFG_FILTER_ACCEPT_BEACON = BIT(3), |
| 321 |
MAC_CFG_FILTER_ACCEPT_BCAST_PROBE_RESP = BIT(4), |
| 322 |
MAC_CFG_FILTER_ACCEPT_PROBE_REQ = BIT(5), |
| 323 |
}; /* MAC_FILTER_FLAGS_MASK_E_VER_1 */ |
| 324 |
|
| 325 |
/** |
| 326 |
* struct iwl_mac_wifi_gen_support_v2 - parameters of iwl_mac_config_cmd |
| 327 |
* with support up to eht as in version 2 of the command |
| 328 |
* |
| 329 |
* @he_support: does this MAC support HE |
| 330 |
* @he_ap_support: HE AP enabled, "pseudo HE", no trigger frame handling |
| 331 |
* @eht_support: does this MAC support EHT. Requires he_support |
| 332 |
*/ |
| 333 |
struct iwl_mac_wifi_gen_support_v2 { |
| 334 |
__le16 he_support; |
| 335 |
__le16 he_ap_support; |
| 336 |
__le32 eht_support; |
| 337 |
} __packed; |
| 338 |
|
| 339 |
/** |
| 340 |
* struct iwl_mac_wifi_gen_support - parameters of iwl_mac_config_cmd |
| 341 |
* with support up to uhr as in version 3 of the command |
| 342 |
* ( MAC_CONTEXT_CONFIG_CMD = 0x8 ) |
| 343 |
* |
| 344 |
* @he_support: does this MAC support HE |
| 345 |
* @he_ap_support: HE AP enabled, "pseudo HE", no trigger frame handling |
| 346 |
* @eht_support: does this MAC support EHT. Requires he_support |
| 347 |
* @uhr_support: does this MAC support UHR. Requires eht_support |
| 348 |
* @reserved: reserved for alignment and to match version 2's size |
| 349 |
*/ |
| 350 |
struct iwl_mac_wifi_gen_support { |
| 351 |
u8 he_support; |
| 352 |
u8 he_ap_support; |
| 353 |
u8 eht_support; |
| 354 |
u8 uhr_support; |
| 355 |
__le32 reserved; |
| 356 |
} __packed; |
| 357 |
|
| 358 |
/** |
| 359 |
* struct iwl_mac_config_cmd - command structure to configure MAC contexts in |
| 360 |
* MLD API for versions 2 and 3 |
| 361 |
* ( MAC_CONTEXT_CONFIG_CMD = 0x8 ) |
| 362 |
* |
| 363 |
* @id_and_color: ID and color of the MAC |
| 364 |
* @action: action to perform, see &enum iwl_ctxt_action |
| 365 |
* @mac_type: one of &enum iwl_mac_types |
| 366 |
* @local_mld_addr: mld address |
| 367 |
* @reserved_for_local_mld_addr: reserved |
| 368 |
* @filter_flags: combination of &enum iwl_mac_config_filter_flags |
| 369 |
* @wifi_gen_v2: he/eht parameters as in cmd version 2 |
| 370 |
* @wifi_gen: he/eht/uhr parameters as in cmd version 3 |
| 371 |
* @nic_not_ack_enabled: mark that the NIC doesn't support receiving |
| 372 |
* ACK-enabled AGG, (i.e. both BACK and non-BACK frames in single AGG). |
| 373 |
* If the NIC is not ACK_ENABLED it may use the EOF-bit in first non-0 |
| 374 |
* len delim to determine if AGG or single. |
| 375 |
* @client: client mac data |
| 376 |
* @p2p_dev: mac data for p2p device |
| 377 |
*/ |
| 378 |
struct iwl_mac_config_cmd { |
| 379 |
__le32 id_and_color; |
| 380 |
__le32 action; |
| 381 |
/* MAC_CONTEXT_TYPE_API_E */ |
| 382 |
__le32 mac_type; |
| 383 |
u8 local_mld_addr[6]; |
| 384 |
__le16 reserved_for_local_mld_addr; |
| 385 |
__le32 filter_flags; |
| 386 |
union { |
| 387 |
struct iwl_mac_wifi_gen_support_v2 wifi_gen_v2; |
| 388 |
struct iwl_mac_wifi_gen_support wifi_gen; |
| 389 |
}; |
| 390 |
__le32 nic_not_ack_enabled; |
| 391 |
/* MAC_CONTEXT_CONFIG_SPECIFIC_DATA_API_U_VER_2 */ |
| 392 |
union { |
| 393 |
struct iwl_mac_client_data client; |
| 394 |
struct iwl_mac_p2p_dev_data p2p_dev; |
| 395 |
}; |
| 396 |
} __packed; /* MAC_CONTEXT_CONFIG_CMD_API_S_VER_2_VER_3 */ |
| 397 |
|
| 398 |
/** |
| 399 |
* enum iwl_link_ctx_modify_flags - indicate to the fw what fields are being |
| 400 |
* modified in &iwl_link_ctx_cfg_cmd |
| 401 |
* |
| 402 |
* @LINK_CONTEXT_MODIFY_ACTIVE: covers iwl_link_ctx_cfg_cmd::active |
| 403 |
* @LINK_CONTEXT_MODIFY_RATES_INFO: covers iwl_link_ctx_cfg_cmd::cck_rates, |
| 404 |
* iwl_link_ctx_cfg_cmd::ofdm_rates, |
| 405 |
* iwl_link_ctx_cfg_cmd::cck_short_preamble, |
| 406 |
* iwl_link_ctx_cfg_cmd::short_slot |
| 407 |
* @LINK_CONTEXT_MODIFY_PROTECT_FLAGS: covers |
| 408 |
* iwl_link_ctx_cfg_cmd::protection_flags |
| 409 |
* @LINK_CONTEXT_MODIFY_QOS_PARAMS: covers iwl_link_ctx_cfg_cmd::qos_flags, |
| 410 |
* iwl_link_ctx_cfg_cmd::ac, |
| 411 |
* @LINK_CONTEXT_MODIFY_BEACON_TIMING: covers iwl_link_ctx_cfg_cmd::bi, |
| 412 |
* iwl_link_ctx_cfg_cmd::dtim_interval, |
| 413 |
* iwl_link_ctx_cfg_cmd::dtim_time, |
| 414 |
* iwl_link_ctx_cfg_cmd::dtim_tsf, |
| 415 |
* iwl_link_ctx_cfg_cmd::assoc_beacon_arrive_time. |
| 416 |
* This flag can be set only once after assoc. |
| 417 |
* @LINK_CONTEXT_MODIFY_HE_PARAMS: covers |
| 418 |
* iwl_link_ctx_cfg_cmd::htc_trig_based_pkt_ext |
| 419 |
* iwl_link_ctx_cfg_cmd::rand_alloc_ecwmin, |
| 420 |
* iwl_link_ctx_cfg_cmd::rand_alloc_ecwmax, |
| 421 |
* iwl_link_ctx_cfg_cmd::trig_based_txf, |
| 422 |
* iwl_link_ctx_cfg_cmd::bss_color, |
| 423 |
* iwl_link_ctx_cfg_cmd::ndp_fdbk_buff_th_exp, |
| 424 |
* iwl_link_ctx_cfg_cmd::ref_bssid_addr |
| 425 |
* iwl_link_ctx_cfg_cmd::bssid_index, |
| 426 |
* iwl_link_ctx_cfg_cmd::frame_time_rts_th. |
| 427 |
* This flag can be set any time. |
| 428 |
* @LINK_CONTEXT_MODIFY_BSS_COLOR_DISABLE: covers |
| 429 |
* iwl_link_ctx_cfg_cmd::bss_color_disable |
| 430 |
* @LINK_CONTEXT_MODIFY_EHT_PARAMS: covers iwl_link_ctx_cfg_cmd::puncture_mask. |
| 431 |
* This flag can be set only if the MAC that this link relates to has |
| 432 |
* eht_support set to true. No longer used since _VER_3 of this command. |
| 433 |
* @LINK_CONTEXT_MODIFY_BANDWIDTH: Covers iwl_link_ctx_cfg_cmd::modify_bandwidth. |
| 434 |
* Request RX OMI to the AP to modify bandwidth of this link. |
| 435 |
* @LINK_CONTEXT_MODIFY_UHR_PARAMS: covers iwl_link_ctx_cfg_cmd::npca_params and |
| 436 |
* iwl_link_ctx_cfg_cmd::prio_edca_params. Since _VER_7. |
| 437 |
* @LINK_CONTEXT_MODIFY_ALL: set all above flags |
| 438 |
*/ |
| 439 |
enum iwl_link_ctx_modify_flags { |
| 440 |
LINK_CONTEXT_MODIFY_ACTIVE = BIT(0), |
| 441 |
LINK_CONTEXT_MODIFY_RATES_INFO = BIT(1), |
| 442 |
LINK_CONTEXT_MODIFY_PROTECT_FLAGS = BIT(2), |
| 443 |
LINK_CONTEXT_MODIFY_QOS_PARAMS = BIT(3), |
| 444 |
LINK_CONTEXT_MODIFY_BEACON_TIMING = BIT(4), |
| 445 |
LINK_CONTEXT_MODIFY_HE_PARAMS = BIT(5), |
| 446 |
LINK_CONTEXT_MODIFY_BSS_COLOR_DISABLE = BIT(6), |
| 447 |
LINK_CONTEXT_MODIFY_EHT_PARAMS = BIT(7), |
| 448 |
LINK_CONTEXT_MODIFY_BANDWIDTH = BIT(8), |
| 449 |
LINK_CONTEXT_MODIFY_UHR_PARAMS = BIT(9), |
| 450 |
LINK_CONTEXT_MODIFY_ALL = 0xff, |
| 451 |
}; /* LINK_CONTEXT_MODIFY_MASK_E_VER_1 */ |
| 452 |
|
| 453 |
/** |
| 454 |
* enum iwl_link_ctx_protection_flags - link protection flags |
| 455 |
* @LINK_PROT_FLG_TGG_PROTECT: 11g protection when transmitting OFDM frames, |
| 456 |
* this will require CCK RTS/CTS2self. |
| 457 |
* RTS/CTS will protect full burst time. |
| 458 |
* @LINK_PROT_FLG_HT_PROT: enable HT protection |
| 459 |
* @LINK_PROT_FLG_FAT_PROT: protect 40 MHz transmissions |
| 460 |
* @LINK_PROT_FLG_SELF_CTS_EN: allow CTS2self |
| 461 |
*/ |
| 462 |
enum iwl_link_ctx_protection_flags { |
| 463 |
LINK_PROT_FLG_TGG_PROTECT = BIT(0), |
| 464 |
LINK_PROT_FLG_HT_PROT = BIT(1), |
| 465 |
LINK_PROT_FLG_FAT_PROT = BIT(2), |
| 466 |
LINK_PROT_FLG_SELF_CTS_EN = BIT(3), |
| 467 |
}; /* LINK_PROTECT_FLAGS_E_VER_1 */ |
| 468 |
|
| 469 |
/** |
| 470 |
* enum iwl_link_ctx_flags - link context flags |
| 471 |
* |
| 472 |
* @LINK_FLG_BSS_COLOR_DIS: BSS color disable, don't use the BSS |
| 473 |
* color for RX filter but use MAC header |
| 474 |
* enabled AGG, i.e. both BACK and non-BACK frames in a single AGG |
| 475 |
* @LINK_FLG_MU_EDCA_CW: indicates that there is an element of MU EDCA |
| 476 |
* parameter set, i.e. the backoff counters for trig-based ACs |
| 477 |
* @LINK_FLG_RU_2MHZ_BLOCK: indicates that 26-tone RU OFDMA transmission are |
| 478 |
* not allowed (as there are OBSS that might classify such transmissions as |
| 479 |
* radar pulses). |
| 480 |
* @LINK_FLG_NDP_FEEDBACK_ENABLED: mark support for NDP feedback and change |
| 481 |
* of threshold |
| 482 |
*/ |
| 483 |
enum iwl_link_ctx_flags { |
| 484 |
LINK_FLG_BSS_COLOR_DIS = BIT(0), |
| 485 |
LINK_FLG_MU_EDCA_CW = BIT(1), |
| 486 |
LINK_FLG_RU_2MHZ_BLOCK = BIT(2), |
| 487 |
LINK_FLG_NDP_FEEDBACK_ENABLED = BIT(3), |
| 488 |
}; /* LINK_CONTEXT_FLAG_E_VER_1 */ |
| 489 |
|
| 490 |
/** |
| 491 |
* enum iwl_link_modify_bandwidth - link modify (RX OMI) bandwidth |
| 492 |
* @IWL_LINK_MODIFY_BW_20: request 20 MHz |
| 493 |
* @IWL_LINK_MODIFY_BW_40: request 40 MHz |
| 494 |
* @IWL_LINK_MODIFY_BW_80: request 80 MHz |
| 495 |
* @IWL_LINK_MODIFY_BW_160: request 160 MHz |
| 496 |
* @IWL_LINK_MODIFY_BW_320: request 320 MHz |
| 497 |
*/ |
| 498 |
enum iwl_link_modify_bandwidth { |
| 499 |
IWL_LINK_MODIFY_BW_20, |
| 500 |
IWL_LINK_MODIFY_BW_40, |
| 501 |
IWL_LINK_MODIFY_BW_80, |
| 502 |
IWL_LINK_MODIFY_BW_160, |
| 503 |
IWL_LINK_MODIFY_BW_320, |
| 504 |
}; |
| 505 |
|
| 506 |
/** |
| 507 |
* enum iwl_npca_flags - NPCA flags |
| 508 |
* @IWL_NPCA_FLAG_MAC_HDR_BASED: MAC header based NPCA operation |
| 509 |
* permitted in the BSS (MOPLEN) |
| 510 |
*/ |
| 511 |
enum iwl_npca_flags { |
| 512 |
IWL_NPCA_FLAG_MAC_HDR_BASED = BIT(0), |
| 513 |
}; /* NPCA_FLAG_E */ |
| 514 |
|
| 515 |
/** |
| 516 |
* struct iwl_npca_params - NPCA parameters (non-primary channel access) |
| 517 |
* |
| 518 |
* @dis_subch_bmap: disabled subchannel bitmap for NPCA |
| 519 |
* @switch_delay: after switch, delay TX according to destination AP |
| 520 |
* @switch_back_delay: switch back to control channel before OBSS frame end |
| 521 |
* @initial_qsrc: Indicates the value that is used to initialize the |
| 522 |
* EDCAF QSRC[AC] variables |
| 523 |
* @min_dur_threshold: minimum PPDU time to switch to the non-primary |
| 524 |
* NPCA channel (usec) |
| 525 |
* @flags: NPCA flags, see &enum iwl_npca_flags |
| 526 |
* @reserved: reserved for alignment purposes |
| 527 |
*/ |
| 528 |
struct iwl_npca_params { |
| 529 |
__le16 dis_subch_bmap; |
| 530 |
u8 switch_delay; |
| 531 |
u8 switch_back_delay; |
| 532 |
u8 initial_qsrc; |
| 533 |
u8 min_dur_threshold; |
| 534 |
u8 flags; |
| 535 |
u8 reserved; |
| 536 |
} __packed; /* NPCA_PARAM_API_S_VER_2 */ |
| 537 |
|
| 538 |
/** |
| 539 |
* struct iwl_link_config_cmd - command structure to configure the LINK context |
| 540 |
* in MLD API |
| 541 |
* ( LINK_CONFIG_CMD =0x9 ) |
| 542 |
* |
| 543 |
* @action: action to perform, see &enum iwl_ctxt_action |
| 544 |
* @link_id: the id of the link that this cmd configures |
| 545 |
* @mac_id: interface ID. Relevant only if action is FW_CTXT_ACTION_ADD |
| 546 |
* @phy_id: PHY index. Can be changed only if the link was inactive |
| 547 |
* (and stays inactive). If the link is active (or becomes active), |
| 548 |
* this field is ignored. |
| 549 |
* @local_link_addr: the links MAC address. Can be changed only if the link was |
| 550 |
* inactive (and stays inactive). If the link is active |
| 551 |
* (or becomes active), this field is ignored. |
| 552 |
* @reserved_for_local_link_addr: reserved |
| 553 |
* @modify_mask: from &enum iwl_link_ctx_modify_flags, selects what to change. |
| 554 |
* Relevant only if action is FW_CTXT_ACTION_MODIFY |
| 555 |
* @active: indicates whether the link is active or not |
| 556 |
* @listen_lmac: indicates whether the link should be allocated on the Listen |
| 557 |
* Lmac or on the Main Lmac. Cannot be changed on an active Link. |
| 558 |
* Relevant only for eSR. |
| 559 |
* @block_tx: tell the firmware that this link can't Tx. This should be used |
| 560 |
* only when a link is de-activated because of CSA with mode = 1. |
| 561 |
* Available since version 5. |
| 562 |
* @modify_bandwidth: bandwidth request value for RX OMI (see also |
| 563 |
* %LINK_CONTEXT_MODIFY_BANDWIDTH), from &enum iwl_link_modify_bandwidth. |
| 564 |
* @reserved1: in version 2, listen_lmac became reserved |
| 565 |
* @cck_rates: basic rates available for CCK |
| 566 |
* @ofdm_rates: basic rates available for OFDM |
| 567 |
* @cck_short_preamble: 1 for enabling short preamble, 0 otherwise |
| 568 |
* @short_slot: 1 for enabling short slots, 0 otherwise |
| 569 |
* @protection_flags: combination of &enum iwl_link_ctx_protection_flags |
| 570 |
* @qos_flags: from &enum iwl_mac_qos_flags |
| 571 |
* @ac: one iwl_mac_qos configuration for each AC |
| 572 |
* @htc_trig_based_pkt_ext: default PE in 4us units |
| 573 |
* @rand_alloc_ecwmin: random CWmin = 2**ECWmin-1 |
| 574 |
* @rand_alloc_ecwmax: random CWmax = 2**ECWmax-1 |
| 575 |
* @ndp_fdbk_buff_th_exp: set exponent for the NDP feedback buffered threshold |
| 576 |
* @trig_based_txf: MU EDCA Parameter set for the trigger based traffic queues |
| 577 |
* @bi: beacon interval in TU, applicable only when associated |
| 578 |
* @dtim_interval: DTIM interval in TU. |
| 579 |
* Relevant only for GO, otherwise this is offloaded. |
| 580 |
* @puncture_mask: puncture mask for EHT (removed in VER_3) |
| 581 |
* @frame_time_rts_th: HE duration RTS threshold, in units of 32us |
| 582 |
* @flags: a combination from &enum iwl_link_ctx_flags |
| 583 |
* @flags_mask: what of %flags have changed. Also &enum iwl_link_ctx_flags |
| 584 |
* Below fields are for multi-bssid: |
| 585 |
* @ref_bssid_addr: reference BSSID used by the AP |
| 586 |
* @reserved_for_ref_bssid_addr: reserved |
| 587 |
* @bssid_index: index of the associated VAP |
| 588 |
* @bss_color: 11ax AP ID that is used in the HE SIG-A to mark inter BSS frame |
| 589 |
* @spec_link_id: link_id as the AP knows it |
| 590 |
* @ul_mu_data_disable: OM Control UL MU Data Disable RX Support (bit 44) in |
| 591 |
* HE MAC Capabilities information field as defined in figure 9-897 in |
| 592 |
* IEEE802.11REVme-D5.0 |
| 593 |
* @ibss_bssid_addr: bssid for ibss |
| 594 |
* @reserved_for_ibss_bssid_addr: reserved |
| 595 |
* @npca_params: NPCA parameters |
| 596 |
* @prio_edca_params: priority EDCA parameters for enhanced QoS |
| 597 |
* @reserved3: reserved for future use |
| 598 |
*/ |
| 599 |
struct iwl_link_config_cmd { |
| 600 |
__le32 action; |
| 601 |
__le32 link_id; |
| 602 |
__le32 mac_id; |
| 603 |
__le32 phy_id; |
| 604 |
u8 local_link_addr[6]; |
| 605 |
__le16 reserved_for_local_link_addr; |
| 606 |
__le32 modify_mask; |
| 607 |
__le32 active; |
| 608 |
union { |
| 609 |
__le32 listen_lmac; /* only _VER_1 */ |
| 610 |
struct { |
| 611 |
u8 block_tx; /* since _VER_5 */ |
| 612 |
u8 modify_bandwidth; /* since _VER_6 */ |
| 613 |
u8 reserved1[2]; |
| 614 |
}; |
| 615 |
}; |
| 616 |
__le32 cck_rates; |
| 617 |
__le32 ofdm_rates; |
| 618 |
__le32 cck_short_preamble; |
| 619 |
__le32 short_slot; |
| 620 |
__le32 protection_flags; |
| 621 |
/* MAC_QOS_PARAM_API_S_VER_1 */ |
| 622 |
__le32 qos_flags; |
| 623 |
struct iwl_ac_qos ac[AC_NUM + 1]; |
| 624 |
u8 htc_trig_based_pkt_ext; |
| 625 |
u8 rand_alloc_ecwmin; |
| 626 |
u8 rand_alloc_ecwmax; |
| 627 |
u8 ndp_fdbk_buff_th_exp; |
| 628 |
struct iwl_he_backoff_conf trig_based_txf[AC_NUM]; |
| 629 |
__le32 bi; |
| 630 |
__le32 dtim_interval; |
| 631 |
__le16 puncture_mask; /* removed in _VER_3 */ |
| 632 |
__le16 frame_time_rts_th; |
| 633 |
__le32 flags; |
| 634 |
__le32 flags_mask; /* removed in _VER_6 */ |
| 635 |
/* The below fields are for multi-bssid */ |
| 636 |
u8 ref_bssid_addr[6]; |
| 637 |
__le16 reserved_for_ref_bssid_addr; |
| 638 |
u8 bssid_index; |
| 639 |
u8 bss_color; |
| 640 |
u8 spec_link_id; |
| 641 |
u8 ul_mu_data_disable; |
| 642 |
u8 ibss_bssid_addr[6]; |
| 643 |
__le16 reserved_for_ibss_bssid_addr; |
| 644 |
struct iwl_npca_params npca_params; /* since _VER_7 */ |
| 645 |
struct iwl_ac_qos prio_edca_params; /* since _VER_7 */ |
| 646 |
__le32 reserved3[4]; |
| 647 |
} __packed; /* LINK_CONTEXT_CONFIG_CMD_API_S_VER_1, _VER_2, _VER_3, _VER_4, |
| 648 |
* _VER_5, _VER_6, _VER_7, _VER_8 */ |
| 649 |
|
| 650 |
/* Currently FW supports link ids in the range 0-3 and can have |
| 651 |
* at most two active links for each vif. |
| 652 |
*/ |
| 653 |
#define IWL_FW_MAX_ACTIVE_LINKS_NUM 2 |
| 654 |
#define IWL_FW_MAX_LINK_ID 3 |
| 655 |
|
| 656 |
/** |
| 657 |
* enum iwl_fw_sta_type - FW station types |
| 658 |
* @STATION_TYPE_PEER: represents a peer - AP in BSS, a TDLS sta, a client in |
| 659 |
* P2P. |
| 660 |
* @STATION_TYPE_BCAST_MGMT: The station used to send beacons and |
| 661 |
* probe responses. Also used for traffic injection in sniffer mode |
| 662 |
* @STATION_TYPE_MCAST: the station used for BCAST / MCAST in GO. Will be |
| 663 |
* suspended / resumed at the right timing depending on the clients' |
| 664 |
* power save state and the DTIM timing |
| 665 |
* @STATION_TYPE_AUX: aux sta. In the FW there is no need for a special type |
| 666 |
* for the aux sta, so this type is only for driver - internal use. |
| 667 |
*/ |
| 668 |
enum iwl_fw_sta_type { |
| 669 |
STATION_TYPE_PEER, |
| 670 |
STATION_TYPE_BCAST_MGMT, |
| 671 |
STATION_TYPE_MCAST, |
| 672 |
STATION_TYPE_AUX, |
| 673 |
}; /* STATION_TYPE_E_VER_1 */ |
| 674 |
|
| 675 |
/** |
| 676 |
* struct iwl_sta_cfg_cmd_v1 - cmd structure to add a peer sta to the uCode's |
| 677 |
* station table |
| 678 |
* ( STA_CONFIG_CMD = 0xA ) |
| 679 |
* |
| 680 |
* @sta_id: index of station in uCode's station table |
| 681 |
* @link_id: the id of the link that is used to communicate with this sta |
| 682 |
* @peer_mld_address: the peers mld address |
| 683 |
* @reserved_for_peer_mld_address: reserved |
| 684 |
* @peer_link_address: the address of the link that is used to communicate |
| 685 |
* with this sta |
| 686 |
* @reserved_for_peer_link_address: reserved |
| 687 |
* @station_type: type of this station. See &enum iwl_fw_sta_type |
| 688 |
* @assoc_id: for GO only |
| 689 |
* @beamform_flags: beam forming controls |
| 690 |
* @mfp: indicates whether the STA uses management frame protection or not. |
| 691 |
* @mimo: indicates whether the sta uses mimo or not |
| 692 |
* @mimo_protection: indicates whether the sta uses mimo protection or not |
| 693 |
* @ack_enabled: indicates that the AP supports receiving ACK- |
| 694 |
* enabled AGG, i.e. both BACK and non-BACK frames in a single AGG |
| 695 |
* @trig_rnd_alloc: indicates that trigger based random allocation |
| 696 |
* is enabled according to UORA element existence |
| 697 |
* @tx_ampdu_spacing: minimum A-MPDU spacing: |
| 698 |
* 4 - 2us density, 5 - 4us density, 6 - 8us density, 7 - 16us density |
| 699 |
* @tx_ampdu_max_size: maximum A-MPDU length: 0 - 8K, 1 - 16K, 2 - 32K, |
| 700 |
* 3 - 64K, 4 - 128K, 5 - 256K, 6 - 512K, 7 - 1024K. |
| 701 |
* @sp_length: the size of the SP in actual number of frames |
| 702 |
* @uapsd_acs: 4 LS bits are trigger enabled ACs, 4 MS bits are the deliver |
| 703 |
* enabled ACs. |
| 704 |
* @pkt_ext: optional, exists according to PPE-present bit in the HE/EHT-PHY |
| 705 |
* capa |
| 706 |
* @htc_flags: which features are supported in HTC |
| 707 |
*/ |
| 708 |
struct iwl_sta_cfg_cmd_v1 { |
| 709 |
__le32 sta_id; |
| 710 |
__le32 link_id; |
| 711 |
u8 peer_mld_address[ETH_ALEN]; |
| 712 |
__le16 reserved_for_peer_mld_address; |
| 713 |
u8 peer_link_address[ETH_ALEN]; |
| 714 |
__le16 reserved_for_peer_link_address; |
| 715 |
__le32 station_type; |
| 716 |
__le32 assoc_id; |
| 717 |
__le32 beamform_flags; |
| 718 |
__le32 mfp; |
| 719 |
__le32 mimo; |
| 720 |
__le32 mimo_protection; |
| 721 |
__le32 ack_enabled; |
| 722 |
__le32 trig_rnd_alloc; |
| 723 |
__le32 tx_ampdu_spacing; |
| 724 |
__le32 tx_ampdu_max_size; |
| 725 |
__le32 sp_length; |
| 726 |
__le32 uapsd_acs; |
| 727 |
struct iwl_he_pkt_ext_v2 pkt_ext; |
| 728 |
__le32 htc_flags; |
| 729 |
} __packed; /* STA_CMD_API_S_VER_1 */ |
| 730 |
|
| 731 |
/** |
| 732 |
* struct iwl_sta_cfg_cmd - cmd structure to add a peer sta to the uCode's |
| 733 |
* station table |
| 734 |
* ( STA_CONFIG_CMD = 0xA ) |
| 735 |
* |
| 736 |
* @sta_id: index of station in uCode's station table |
| 737 |
* @link_id: the id of the link that is used to communicate with this sta |
| 738 |
* @peer_mld_address: the peers mld address |
| 739 |
* @reserved_for_peer_mld_address: reserved |
| 740 |
* @peer_link_address: the address of the link that is used to communicate |
| 741 |
* with this sta |
| 742 |
* @reserved_for_peer_link_address: reserved |
| 743 |
* @station_type: type of this station. See &enum iwl_fw_sta_type |
| 744 |
* @assoc_id: for GO only |
| 745 |
* @beamform_flags: beam forming controls |
| 746 |
* @mfp: indicates whether the STA uses management frame protection or not. |
| 747 |
* @mimo: indicates whether the sta uses mimo or not |
| 748 |
* @mimo_protection: indicates whether the sta uses mimo protection or not |
| 749 |
* @ack_enabled: indicates that the AP supports receiving ACK- |
| 750 |
* enabled AGG, i.e. both BACK and non-BACK frames in a single AGG |
| 751 |
* @trig_rnd_alloc: indicates that trigger based random allocation |
| 752 |
* is enabled according to UORA element existence |
| 753 |
* @tx_ampdu_spacing: minimum A-MPDU spacing: |
| 754 |
* 4 - 2us density, 5 - 4us density, 6 - 8us density, 7 - 16us density |
| 755 |
* @tx_ampdu_max_size: maximum A-MPDU length: 0 - 8K, 1 - 16K, 2 - 32K, |
| 756 |
* 3 - 64K, 4 - 128K, 5 - 256K, 6 - 512K, 7 - 1024K. |
| 757 |
* @sp_length: the size of the SP in actual number of frames |
| 758 |
* @uapsd_acs: 4 LS bits are trigger enabled ACs, 4 MS bits are the deliver |
| 759 |
* enabled ACs. |
| 760 |
* @pkt_ext: optional, exists according to PPE-present bit in the HE/EHT-PHY |
| 761 |
* capa |
| 762 |
* @htc_flags: which features are supported in HTC |
| 763 |
* @use_ldpc_x2_cw: Indicates whether to use LDPC with double CW |
| 764 |
* @use_icf: Indicates whether to use ICF instead of RTS |
| 765 |
* @dps_pad_time: DPS (Dynamic Power Save) padding delay resolution to ensure |
| 766 |
* proper timing alignment |
| 767 |
* @dps_trans_delay: DPS minimal time that takes the peer to return to low power |
| 768 |
* @mic_prep_pad_delay: MIC prep time padding |
| 769 |
* @mic_compute_pad_delay: MIC compute time padding |
| 770 |
* @reserved: Reserved for alignment |
| 771 |
*/ |
| 772 |
struct iwl_sta_cfg_cmd { |
| 773 |
__le32 sta_id; |
| 774 |
__le32 link_id; |
| 775 |
u8 peer_mld_address[ETH_ALEN]; |
| 776 |
__le16 reserved_for_peer_mld_address; |
| 777 |
u8 peer_link_address[ETH_ALEN]; |
| 778 |
__le16 reserved_for_peer_link_address; |
| 779 |
__le32 station_type; |
| 780 |
__le32 assoc_id; |
| 781 |
__le32 beamform_flags; |
| 782 |
__le32 mfp; |
| 783 |
__le32 mimo; |
| 784 |
__le32 mimo_protection; |
| 785 |
__le32 ack_enabled; |
| 786 |
__le32 trig_rnd_alloc; |
| 787 |
__le32 tx_ampdu_spacing; |
| 788 |
__le32 tx_ampdu_max_size; |
| 789 |
__le32 sp_length; |
| 790 |
__le32 uapsd_acs; |
| 791 |
struct iwl_he_pkt_ext_v2 pkt_ext; |
| 792 |
__le32 htc_flags; |
| 793 |
u8 use_ldpc_x2_cw; |
| 794 |
u8 use_icf; |
| 795 |
u8 dps_pad_time; |
| 796 |
u8 dps_trans_delay; |
| 797 |
u8 mic_prep_pad_delay; |
| 798 |
u8 mic_compute_pad_delay; |
| 799 |
u8 reserved[2]; |
| 800 |
} __packed; /* STA_CMD_API_S_VER_2 */ |
| 801 |
|
| 802 |
/** |
| 803 |
* struct iwl_aux_sta_cmd - command for AUX STA configuration |
| 804 |
* ( AUX_STA_CMD = 0xB ) |
| 805 |
* |
| 806 |
* @sta_id: index of aux sta to configure |
| 807 |
* @lmac_id: ? |
| 808 |
* @mac_addr: mac addr of the auxilary sta |
| 809 |
* @reserved_for_mac_addr: reserved |
| 810 |
*/ |
| 811 |
struct iwl_aux_sta_cmd { |
| 812 |
__le32 sta_id; |
| 813 |
__le32 lmac_id; |
| 814 |
u8 mac_addr[ETH_ALEN]; |
| 815 |
__le16 reserved_for_mac_addr; |
| 816 |
|
| 817 |
} __packed; /* AUX_STA_CMD_API_S_VER_1 */ |
| 818 |
|
| 819 |
/** |
| 820 |
* struct iwl_remove_sta_cmd - a cmd structure to remove a sta added by |
| 821 |
* STA_CONFIG_CMD or AUX_STA_CONFIG_CMD |
| 822 |
* ( STA_REMOVE_CMD = 0xC ) |
| 823 |
* |
| 824 |
* @sta_id: index of station to remove |
| 825 |
*/ |
| 826 |
struct iwl_remove_sta_cmd { |
| 827 |
__le32 sta_id; |
| 828 |
} __packed; /* REMOVE_STA_API_S_VER_1 */ |
| 829 |
|
| 830 |
/** |
| 831 |
* struct iwl_mvm_sta_disable_tx_cmd - disable / re-enable tx to a sta |
| 832 |
* ( STA_DISABLE_TX_CMD = 0xD ) |
| 833 |
* |
| 834 |
* @sta_id: index of the station to disable tx to |
| 835 |
* @disable: indicates if to disable or re-enable tx |
| 836 |
*/ |
| 837 |
struct iwl_mvm_sta_disable_tx_cmd { |
| 838 |
__le32 sta_id; |
| 839 |
__le32 disable; |
| 840 |
} __packed; /* STA_DISABLE_TX_API_S_VER_1 */ |
| 841 |
|
| 842 |
/** |
| 843 |
* enum iwl_mvm_fw_esr_recommendation - FW recommendation code |
| 844 |
* @ESR_RECOMMEND_LEAVE: recommendation to leave EMLSR |
| 845 |
* @ESR_FORCE_LEAVE: force exiting EMLSR |
| 846 |
* @ESR_RECOMMEND_ENTER: recommendation to enter EMLSR |
| 847 |
*/ |
| 848 |
enum iwl_mvm_fw_esr_recommendation { |
| 849 |
ESR_RECOMMEND_LEAVE, |
| 850 |
ESR_FORCE_LEAVE, |
| 851 |
ESR_RECOMMEND_ENTER, |
| 852 |
}; /* ESR_MODE_RECOMMENDATION_CODE_API_E_VER_1 */ |
| 853 |
|
| 854 |
/** |
| 855 |
* struct iwl_esr_mode_notif_v1 - FW recommendation/force for EMLSR mode |
| 856 |
* |
| 857 |
* @action: the action to apply on EMLSR state. |
| 858 |
* See &iwl_mvm_fw_esr_recommendation |
| 859 |
*/ |
| 860 |
struct iwl_esr_mode_notif_v1 { |
| 861 |
__le32 action; |
| 862 |
} __packed; /* ESR_MODE_RECOMMENDATION_NTFY_API_S_VER_1 */ |
| 863 |
|
| 864 |
/** |
| 865 |
* enum iwl_esr_leave_reason - reasons for leaving EMLSR mode |
| 866 |
* |
| 867 |
* @ESR_LEAVE_REASON_OMI_MU_UL_DISALLOWED: OMI MU UL disallowed |
| 868 |
* @ESR_LEAVE_REASON_NO_TRIG_FOR_ESR_STA: No trigger for EMLSR station |
| 869 |
* @ESR_LEAVE_REASON_NO_ESR_STA_IN_MU_DL: No EMLSR station in MU DL |
| 870 |
* @ESR_LEAVE_REASON_BAD_ACTIV_FRAME_TH: Bad activation frame threshold |
| 871 |
* @ESR_LEAVE_REASON_RTS_IN_DUAL_LISTEN: RTS in dual listen |
| 872 |
*/ |
| 873 |
enum iwl_esr_leave_reason { |
| 874 |
ESR_LEAVE_REASON_OMI_MU_UL_DISALLOWED = BIT(0), |
| 875 |
ESR_LEAVE_REASON_NO_TRIG_FOR_ESR_STA = BIT(1), |
| 876 |
ESR_LEAVE_REASON_NO_ESR_STA_IN_MU_DL = BIT(2), |
| 877 |
ESR_LEAVE_REASON_BAD_ACTIV_FRAME_TH = BIT(3), |
| 878 |
ESR_LEAVE_REASON_RTS_IN_DUAL_LISTEN = BIT(4), |
| 879 |
}; |
| 880 |
|
| 881 |
/** |
| 882 |
* struct iwl_esr_mode_notif - FW recommendation/force for EMLSR mode |
| 883 |
* |
| 884 |
* @action: the action to apply on EMLSR state. |
| 885 |
* See &iwl_mvm_fw_esr_recommendation |
| 886 |
* @leave_reason_mask: mask for various reasons to leave EMLSR mode. |
| 887 |
* See &iwl_esr_leave_reason |
| 888 |
*/ |
| 889 |
struct iwl_esr_mode_notif { |
| 890 |
__le32 action; |
| 891 |
__le32 leave_reason_mask; |
| 892 |
} __packed; /* ESR_MODE_RECOMMENDATION_NTFY_API_S_VER_2 */ |
| 893 |
|
| 894 |
/** |
| 895 |
* struct iwl_missed_beacons_notif - sent when by the firmware upon beacon loss |
| 896 |
* ( MISSED_BEACONS_NOTIF = 0xF6 ) |
| 897 |
* @link_id: fw link ID |
| 898 |
* @consec_missed_beacons_since_last_rx: number of consecutive missed |
| 899 |
* beacons since last RX. |
| 900 |
* @consec_missed_beacons: number of consecutive missed beacons |
| 901 |
* @other_link_id: used in EMLSR only. The fw link ID for |
| 902 |
* &consec_missed_beacons_other_link. IWL_MVM_FW_LINK_ID_INVALID (0xff) if |
| 903 |
* invalid. |
| 904 |
* @consec_missed_beacons_other_link: number of consecutive missed beacons on |
| 905 |
* &other_link_id. |
| 906 |
*/ |
| 907 |
struct iwl_missed_beacons_notif { |
| 908 |
__le32 link_id; |
| 909 |
__le32 consec_missed_beacons_since_last_rx; |
| 910 |
__le32 consec_missed_beacons; |
| 911 |
__le32 other_link_id; |
| 912 |
__le32 consec_missed_beacons_other_link; |
| 913 |
} __packed; /* MISSED_BEACON_NTFY_API_S_VER_5 */ |
| 914 |
|
| 915 |
/* |
| 916 |
* enum iwl_esr_trans_fail_code: to be used to parse the notif below |
| 917 |
* |
| 918 |
* @ESR_TRANS_FAILED_TX_STATUS_ERROR: failed to TX EML OMN frame |
| 919 |
* @ESR_TRANSITION_FAILED_TX_TIMEOUT: timeout on the EML OMN frame |
| 920 |
* @ESR_TRANSITION_FAILED_BEACONS_NOT_HEARD: can't get a beacon on the new link |
| 921 |
*/ |
| 922 |
enum iwl_esr_trans_fail_code { |
| 923 |
ESR_TRANS_FAILED_TX_STATUS_ERROR, |
| 924 |
ESR_TRANSITION_FAILED_TX_TIMEOUT, |
| 925 |
ESR_TRANSITION_FAILED_BEACONS_NOT_HEARD, |
| 926 |
}; |
| 927 |
|
| 928 |
/** |
| 929 |
* struct iwl_esr_trans_fail_notif - FW reports a failure in EMLSR transition |
| 930 |
* |
| 931 |
* @link_id: the link_id that still works after the failure |
| 932 |
* @activation: true if the link was activated, false otherwise |
| 933 |
* @err_code: see &enum iwl_esr_trans_fail_code |
| 934 |
*/ |
| 935 |
struct iwl_esr_trans_fail_notif { |
| 936 |
__le32 link_id; |
| 937 |
__le32 activation; |
| 938 |
__le32 err_code; |
| 939 |
} __packed; /* ESR_TRANSITION_FAILED_NTFY_API_S_VER_1 */ |
| 940 |
|
| 941 |
/* |
| 942 |
* enum iwl_twt_operation_type: TWT operation in a TWT action frame |
| 943 |
* |
| 944 |
* @TWT_OPERATION_REQUEST: TWT Request |
| 945 |
* @TWT_OPERATION_SUGGEST: TWT Suggest |
| 946 |
* @TWT_OPERATION_DEMAND: TWT Demand |
| 947 |
* @TWT_OPERATION_GROUPING: TWT Grouping |
| 948 |
* @TWT_OPERATION_ACCEPT: TWT Accept |
| 949 |
* @TWT_OPERATION_ALTERNATE: TWT Alternate |
| 950 |
* @TWT_OPERATION_DICTATE: TWT Dictate |
| 951 |
* @TWT_OPERATION_REJECT: TWT Reject |
| 952 |
* @TWT_OPERATION_TEARDOWN: TWT Teardown |
| 953 |
* @TWT_OPERATION_UNAVAILABILITY: TWT Unavailability |
| 954 |
*/ |
| 955 |
enum iwl_twt_operation_type { |
| 956 |
TWT_OPERATION_REQUEST, |
| 957 |
TWT_OPERATION_SUGGEST, |
| 958 |
TWT_OPERATION_DEMAND, |
| 959 |
TWT_OPERATION_GROUPING, |
| 960 |
TWT_OPERATION_ACCEPT, |
| 961 |
TWT_OPERATION_ALTERNATE, |
| 962 |
TWT_OPERATION_DICTATE, |
| 963 |
TWT_OPERATION_REJECT, |
| 964 |
TWT_OPERATION_TEARDOWN, |
| 965 |
TWT_OPERATION_UNAVAILABILITY, |
| 966 |
TWT_OPERATION_MAX, |
| 967 |
}; /* TWT_OPERATION_TYPE_E_VER_1 */ |
| 968 |
|
| 969 |
/** |
| 970 |
* struct iwl_twt_operation_cmd - initiate a TWT session from driver |
| 971 |
* |
| 972 |
* @link_id: FW link id to initiate the TWT |
| 973 |
* @twt_operation: &enum iwl_twt_operation_type |
| 974 |
* @target_wake_time: TSF time to start the TWT |
| 975 |
* @interval_exponent: the exponent for the interval |
| 976 |
* @interval_mantissa: the mantissa for the interval |
| 977 |
* @minimum_wake_duration: the minimum duration for the wake period |
| 978 |
* @trigger: is the TWT triggered or not |
| 979 |
* @flow_type: is the TWT announced (0) or not (1) |
| 980 |
* @flow_id: the TWT flow identifier 0 - 7 |
| 981 |
* @twt_protection: is the TWT protected |
| 982 |
* @ndp_paging_indicator: is ndp paging indicator set |
| 983 |
* @responder_pm_mode: is responder pm mode set |
| 984 |
* @negotiation_type: if the responder wants to doze outside the TWT SP |
| 985 |
* @twt_request: 1 for TWT request (STA), 0 for TWT response (AP) |
| 986 |
* @implicit: is TWT implicit |
| 987 |
* @twt_group_assignment: the TWT group assignment |
| 988 |
* @twt_channel: the TWT channel |
| 989 |
* @restricted_info_present: is this a restricted TWT |
| 990 |
* @dl_bitmap_valid: is DL (download) bitmap valid (restricted TWT) |
| 991 |
* @ul_bitmap_valid: is UL (upload) bitmap valid (restricted TWT) |
| 992 |
* @dl_tid_bitmap: DL TID bitmap (restricted TWT) |
| 993 |
* @ul_tid_bitmap: UL TID bitmap (restricted TWT) |
| 994 |
*/ |
| 995 |
struct iwl_twt_operation_cmd { |
| 996 |
__le32 link_id; |
| 997 |
__le32 twt_operation; |
| 998 |
__le64 target_wake_time; |
| 999 |
__le32 interval_exponent; |
| 1000 |
__le32 interval_mantissa; |
| 1001 |
__le32 minimum_wake_duration; |
| 1002 |
u8 trigger; |
| 1003 |
u8 flow_type; |
| 1004 |
u8 flow_id; |
| 1005 |
u8 twt_protection; |
| 1006 |
u8 ndp_paging_indicator; |
| 1007 |
u8 responder_pm_mode; |
| 1008 |
u8 negotiation_type; |
| 1009 |
u8 twt_request; |
| 1010 |
u8 implicit; |
| 1011 |
u8 twt_group_assignment; |
| 1012 |
u8 twt_channel; |
| 1013 |
u8 restricted_info_present; |
| 1014 |
u8 dl_bitmap_valid; |
| 1015 |
u8 ul_bitmap_valid; |
| 1016 |
u8 dl_tid_bitmap; |
| 1017 |
u8 ul_tid_bitmap; |
| 1018 |
} __packed; /* TWT_OPERATION_API_S_VER_1 */ |
| 1019 |
|
| 1020 |
enum iwl_nan_band { |
| 1021 |
IWL_NAN_BAND_5GHZ = 0, |
| 1022 |
IWL_NAN_BAND_2GHZ = 1, |
| 1023 |
IWL_NUM_NAN_BANDS, |
| 1024 |
}; |
| 1025 |
|
| 1026 |
/** |
| 1027 |
* struct iwl_nan_band_config - NAN band configuration |
| 1028 |
* |
| 1029 |
* @rssi_close: RSSI threshold for close proximity in dBm |
| 1030 |
* @rssi_middle: RSSI threshold for middle proximity in dBm |
| 1031 |
* @dw_interval: Discovery Window (DW) interval for synchronization beacons and |
| 1032 |
* SDFs. Valid values of DW interval are: 1, 2, 3, 4 and 5 corresponding to |
| 1033 |
* 1, 2, 4, 8, and 16 DWs. |
| 1034 |
* @reserved: reserved |
| 1035 |
*/ |
| 1036 |
struct iwl_nan_band_config { |
| 1037 |
u8 rssi_close; |
| 1038 |
u8 rssi_middle; |
| 1039 |
u8 dw_interval; |
| 1040 |
u8 reserved; |
| 1041 |
}; /* NAN_BAND_SPECIFIC_CONFIG_API_S_VER_1 */ |
| 1042 |
|
| 1043 |
/** |
| 1044 |
* enum iwl_nan_flags - flags for NAN configuration |
| 1045 |
* |
| 1046 |
* @IWL_NAN_FLAG_DW_END_NOTIF_ENABLED: indicates that the host wants to receive |
| 1047 |
* notifications when a DW ends. |
| 1048 |
*/ |
| 1049 |
enum iwl_nan_flags { |
| 1050 |
IWL_NAN_FLAG_DW_END_NOTIF_ENABLED = BIT(0), |
| 1051 |
}; |
| 1052 |
|
| 1053 |
/** |
| 1054 |
* struct iwl_nan_config_cmd - NAN configuration command |
| 1055 |
* |
| 1056 |
* @action: action to perform, see &enum iwl_ctxt_action |
| 1057 |
* @nmi_addr: NAN Management Interface (NMI) address |
| 1058 |
* @reserved_for_nmi_addr: reserved |
| 1059 |
* @discovery_beacon_interval: discovery beacon interval in TUs |
| 1060 |
* @cluster_id: lower last two bytes of the cluster ID, in case the local |
| 1061 |
* device starts a cluster |
| 1062 |
* @sta_id: station ID of the NAN station |
| 1063 |
* @hb_channel: channel for 5 GHz if the device supports operation on 5 GHz. |
| 1064 |
* Valid values are 44 and 149, which correspond to the 5 GHz channel, and |
| 1065 |
* 0 which means that NAN operation on the 5 GHz band is disabled. |
| 1066 |
* @master_pref: master preference |
| 1067 |
* @dwell_time: dwell time on the discovery channel during scan (milliseconds). |
| 1068 |
* If set to 0, the dwell time is determined by the firmware. |
| 1069 |
* @scan_period: scan period in seconds. If set to 0, the scan period is |
| 1070 |
* determined by the firmware. |
| 1071 |
* @flags: flags for NAN configuration, see &enum iwl_nan_flags |
| 1072 |
* @band_config: band configuration for NAN, one for each band |
| 1073 |
* @nan_attr_len: length of the NAN attributes to be added to the beacon (bytes) |
| 1074 |
* @nan_vendor_elems_len: length of the NAN vendor elements to be added to the |
| 1075 |
* beacon (bytes) |
| 1076 |
* @beacon_data: variable length data that contains the NAN attributes |
| 1077 |
* (&nan_attr_len) followed by the NAN vendor elements |
| 1078 |
* (&nan_vendor_elems_len). |
| 1079 |
*/ |
| 1080 |
struct iwl_nan_config_cmd { |
| 1081 |
__le32 action; |
| 1082 |
u8 nmi_addr[6]; |
| 1083 |
__le16 reserved_for_nmi_addr; |
| 1084 |
__le32 discovery_beacon_interval; |
| 1085 |
|
| 1086 |
u8 cluster_id[2]; |
| 1087 |
u8 sta_id; |
| 1088 |
u8 hb_channel; |
| 1089 |
|
| 1090 |
u8 master_pref; |
| 1091 |
u8 dwell_time; |
| 1092 |
u8 scan_period; |
| 1093 |
u8 flags; |
| 1094 |
|
| 1095 |
struct iwl_nan_band_config band_config[IWL_NUM_NAN_BANDS]; |
| 1096 |
|
| 1097 |
__le32 nan_attr_len; |
| 1098 |
__le32 nan_vendor_elems_len; |
| 1099 |
u8 beacon_data[]; |
| 1100 |
} __packed; /* NAN_CONFIG_CMD_API_S_VER_1 */ |
| 1101 |
|
| 1102 |
/** |
| 1103 |
* enum iwl_nan_cluster_notif_flags - flags for the cluster notification |
| 1104 |
* |
| 1105 |
* @IWL_NAN_CLUSTER_NOTIF_FLAG_NEW_CLUSTER: indicates that the device has |
| 1106 |
* started a new cluster. If not set, the device has joined an existing |
| 1107 |
* cluster. |
| 1108 |
*/ |
| 1109 |
enum iwl_nan_cluster_notif_flags { |
| 1110 |
IWL_NAN_CLUSTER_NOTIF_FLAG_NEW_CLUSTER = BIT(0), |
| 1111 |
}; /* NAN_JOINED_CLUSTER_FLAG_E_VER_1 */ |
| 1112 |
|
| 1113 |
/** |
| 1114 |
* struct iwl_nan_cluster_notif - event sent when the device starts or joins a |
| 1115 |
* NAN cluster. |
| 1116 |
* |
| 1117 |
* @cluster_id: the last two bytes of the cluster ID |
| 1118 |
* @flags: combination of &enum iwl_nan_cluster_notif_flags |
| 1119 |
* @reserved: reserved |
| 1120 |
*/ |
| 1121 |
struct iwl_nan_cluster_notif { |
| 1122 |
u8 cluster_id[2]; |
| 1123 |
u8 flags; |
| 1124 |
u8 reserved; |
| 1125 |
}; /* NAN_JOINED_CLUSTER_NTF_API_S_VER_1 */ |
| 1126 |
|
| 1127 |
/** |
| 1128 |
* struct iwl_nan_dw_end_notif - sent to notify the host the end of a DW. |
| 1129 |
* |
| 1130 |
* @band: band on which the DW ended. See &enum iwl_nan_band. |
| 1131 |
* @reserved: reserved |
| 1132 |
*/ |
| 1133 |
struct iwl_nan_dw_end_notif { |
| 1134 |
u8 band; |
| 1135 |
u8 reserved[3]; |
| 1136 |
} __packed; /* NAN_DW_END_NTF_API_S_VER_1 */ |
| 1137 |
|
| 1138 |
#endif /* __iwl_fw_api_mac_cfg_h__ */ |