| 1 |
/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ |
| 2 |
/* |
| 3 |
* Copyright (C) 2012-2014, 2018-2019, 2023-2024 Intel Corporation |
| 4 |
* Copyright (C) 2013-2015 Intel Mobile Communications GmbH |
| 5 |
* Copyright (C) 2016-2017 Intel Deutschland GmbH |
| 6 |
*/ |
| 7 |
#ifndef __iwl_fw_api_config_h__ |
| 8 |
#define __iwl_fw_api_config_h__ |
| 9 |
|
| 10 |
/* |
| 11 |
* struct iwl_dqa_enable_cmd |
| 12 |
* @cmd_queue: the TXQ number of the command queue |
| 13 |
*/ |
| 14 |
struct iwl_dqa_enable_cmd { |
| 15 |
__le32 cmd_queue; |
| 16 |
} __packed; /* DQA_CONTROL_CMD_API_S_VER_1 */ |
| 17 |
|
| 18 |
/* |
| 19 |
* struct iwl_tx_ant_cfg_cmd |
| 20 |
* @valid: valid antenna configuration |
| 21 |
*/ |
| 22 |
struct iwl_tx_ant_cfg_cmd { |
| 23 |
__le32 valid; |
| 24 |
} __packed; |
| 25 |
|
| 26 |
/** |
| 27 |
* struct iwl_calib_ctrl - Calibration control struct. |
| 28 |
* Sent as part of the phy configuration command. |
| 29 |
* @flow_trigger: bitmap for which calibrations to perform according to |
| 30 |
* flow triggers, using &enum iwl_calib_cfg |
| 31 |
* @event_trigger: bitmap for which calibrations to perform according to |
| 32 |
* event triggers, using &enum iwl_calib_cfg |
| 33 |
*/ |
| 34 |
struct iwl_calib_ctrl { |
| 35 |
__le32 flow_trigger; |
| 36 |
__le32 event_trigger; |
| 37 |
} __packed; |
| 38 |
|
| 39 |
/* This enum defines the bitmap of various calibrations to enable in both |
| 40 |
* init ucode and runtime ucode through CALIBRATION_CFG_CMD. |
| 41 |
*/ |
| 42 |
enum iwl_calib_cfg { |
| 43 |
IWL_CALIB_CFG_XTAL_IDX = BIT(0), |
| 44 |
IWL_CALIB_CFG_TEMPERATURE_IDX = BIT(1), |
| 45 |
IWL_CALIB_CFG_VOLTAGE_READ_IDX = BIT(2), |
| 46 |
IWL_CALIB_CFG_PAPD_IDX = BIT(3), |
| 47 |
IWL_CALIB_CFG_TX_PWR_IDX = BIT(4), |
| 48 |
IWL_CALIB_CFG_DC_IDX = BIT(5), |
| 49 |
IWL_CALIB_CFG_BB_FILTER_IDX = BIT(6), |
| 50 |
IWL_CALIB_CFG_LO_LEAKAGE_IDX = BIT(7), |
| 51 |
IWL_CALIB_CFG_TX_IQ_IDX = BIT(8), |
| 52 |
IWL_CALIB_CFG_TX_IQ_SKEW_IDX = BIT(9), |
| 53 |
IWL_CALIB_CFG_RX_IQ_IDX = BIT(10), |
| 54 |
IWL_CALIB_CFG_RX_IQ_SKEW_IDX = BIT(11), |
| 55 |
IWL_CALIB_CFG_SENSITIVITY_IDX = BIT(12), |
| 56 |
IWL_CALIB_CFG_CHAIN_NOISE_IDX = BIT(13), |
| 57 |
IWL_CALIB_CFG_DISCONNECTED_ANT_IDX = BIT(14), |
| 58 |
IWL_CALIB_CFG_ANT_COUPLING_IDX = BIT(15), |
| 59 |
IWL_CALIB_CFG_DAC_IDX = BIT(16), |
| 60 |
IWL_CALIB_CFG_ABS_IDX = BIT(17), |
| 61 |
IWL_CALIB_CFG_AGC_IDX = BIT(18), |
| 62 |
}; |
| 63 |
|
| 64 |
/** |
| 65 |
* struct iwl_phy_specific_cfg - specific PHY filter configuration |
| 66 |
* |
| 67 |
* Sent as part of the phy configuration command (v3) to configure specific FW |
| 68 |
* defined PHY filters that can be applied to each antenna. |
| 69 |
* |
| 70 |
* @filter_cfg_chains: filter config id for LMAC1 chain A, LMAC1 chain B, |
| 71 |
* LMAC2 chain A, LMAC2 chain B (in that order) |
| 72 |
* values: 0: no filter; 0xffffffff: reserved; otherwise: filter id |
| 73 |
*/ |
| 74 |
struct iwl_phy_specific_cfg { |
| 75 |
__le32 filter_cfg_chains[4]; |
| 76 |
} __packed; /* PHY_SPECIFIC_CONFIGURATION_API_VER_1*/ |
| 77 |
|
| 78 |
/** |
| 79 |
* struct iwl_phy_cfg_cmd_v1 - Phy configuration command |
| 80 |
* |
| 81 |
* @phy_cfg: PHY configuration value, uses &enum iwl_fw_phy_cfg |
| 82 |
* @calib_control: calibration control data |
| 83 |
*/ |
| 84 |
struct iwl_phy_cfg_cmd_v1 { |
| 85 |
__le32 phy_cfg; |
| 86 |
struct iwl_calib_ctrl calib_control; |
| 87 |
} __packed; |
| 88 |
|
| 89 |
/** |
| 90 |
* struct iwl_phy_cfg_cmd_v3 - Phy configuration command (v3) |
| 91 |
* |
| 92 |
* @phy_cfg: PHY configuration value, uses &enum iwl_fw_phy_cfg |
| 93 |
* @calib_control: calibration control data |
| 94 |
* @phy_specific_cfg: configure predefined PHY filters |
| 95 |
*/ |
| 96 |
struct iwl_phy_cfg_cmd_v3 { |
| 97 |
__le32 phy_cfg; |
| 98 |
struct iwl_calib_ctrl calib_control; |
| 99 |
struct iwl_phy_specific_cfg phy_specific_cfg; |
| 100 |
} __packed; /* PHY_CONFIGURATION_CMD_API_S_VER_3 */ |
| 101 |
|
| 102 |
/* |
| 103 |
* enum iwl_dc2dc_config_id - flag ids |
| 104 |
* |
| 105 |
* Ids of dc2dc configuration flags |
| 106 |
*/ |
| 107 |
enum iwl_dc2dc_config_id { |
| 108 |
DCDC_LOW_POWER_MODE_MSK_SET = 0x1, /* not used */ |
| 109 |
DCDC_FREQ_TUNE_SET = 0x2, |
| 110 |
}; /* MARKER_ID_API_E_VER_1 */ |
| 111 |
|
| 112 |
#endif /* __iwl_fw_api_config_h__ */ |