| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* CAN driver for PEAK System PCAN-USB adapter |
| 4 |
* Derived from the PCAN project file driver/src/pcan_usb.c |
| 5 |
* |
| 6 |
* Copyright (C) 2003-2025 PEAK System-Technik GmbH |
| 7 |
* Author: Stéphane Grosjean <[email protected]> |
| 8 |
* |
| 9 |
* Many thanks to Klaus Hitschler <[email protected]> |
| 10 |
*/ |
| 11 |
#include <linux/unaligned.h> |
| 12 |
|
| 13 |
#include <linux/ethtool.h> |
| 14 |
#include <linux/module.h> |
| 15 |
#include <linux/netdevice.h> |
| 16 |
#include <linux/usb.h> |
| 17 |
|
| 18 |
#include <linux/can.h> |
| 19 |
#include <linux/can/dev.h> |
| 20 |
#include <linux/can/error.h> |
| 21 |
|
| 22 |
#include "pcan_usb_core.h" |
| 23 |
|
| 24 |
/* PCAN-USB Endpoints */ |
| 25 |
#define PCAN_USB_EP_CMDOUT 1 |
| 26 |
#define PCAN_USB_EP_CMDIN (PCAN_USB_EP_CMDOUT | USB_DIR_IN) |
| 27 |
#define PCAN_USB_EP_MSGOUT 2 |
| 28 |
#define PCAN_USB_EP_MSGIN (PCAN_USB_EP_MSGOUT | USB_DIR_IN) |
| 29 |
|
| 30 |
/* PCAN-USB command struct */ |
| 31 |
#define PCAN_USB_CMD_FUNC 0 |
| 32 |
#define PCAN_USB_CMD_NUM 1 |
| 33 |
#define PCAN_USB_CMD_ARGS 2 |
| 34 |
#define PCAN_USB_CMD_ARGS_LEN 14 |
| 35 |
#define PCAN_USB_CMD_LEN (PCAN_USB_CMD_ARGS + \ |
| 36 |
PCAN_USB_CMD_ARGS_LEN) |
| 37 |
|
| 38 |
/* PCAN-USB commands */ |
| 39 |
#define PCAN_USB_CMD_BITRATE 1 |
| 40 |
#define PCAN_USB_CMD_SET_BUS 3 |
| 41 |
#define PCAN_USB_CMD_DEVID 4 |
| 42 |
#define PCAN_USB_CMD_SN 6 |
| 43 |
#define PCAN_USB_CMD_REGISTER 9 |
| 44 |
#define PCAN_USB_CMD_EXT_VCC 10 |
| 45 |
#define PCAN_USB_CMD_ERR_FR 11 |
| 46 |
#define PCAN_USB_CMD_LED 12 |
| 47 |
|
| 48 |
/* PCAN_USB_CMD_SET_BUS number arg */ |
| 49 |
#define PCAN_USB_BUS_XCVER 2 |
| 50 |
#define PCAN_USB_BUS_SILENT_MODE 3 |
| 51 |
|
| 52 |
/* PCAN_USB_CMD_xxx functions */ |
| 53 |
#define PCAN_USB_GET 1 |
| 54 |
#define PCAN_USB_SET 2 |
| 55 |
|
| 56 |
/* PCAN-USB command timeout (ms.) */ |
| 57 |
#define PCAN_USB_COMMAND_TIMEOUT 1000 |
| 58 |
|
| 59 |
/* PCAN-USB startup timeout (ms.) */ |
| 60 |
#define PCAN_USB_STARTUP_TIMEOUT 10 |
| 61 |
|
| 62 |
/* PCAN-USB rx/tx buffers size */ |
| 63 |
#define PCAN_USB_RX_BUFFER_SIZE 64 |
| 64 |
#define PCAN_USB_TX_BUFFER_SIZE 64 |
| 65 |
|
| 66 |
#define PCAN_USB_MSG_HEADER_LEN 2 |
| 67 |
|
| 68 |
#define PCAN_USB_MSG_TX_CAN 2 /* Tx msg is a CAN frame */ |
| 69 |
|
| 70 |
/* PCAN-USB adapter internal clock (MHz) */ |
| 71 |
#define PCAN_USB_CRYSTAL_HZ 16000000 |
| 72 |
|
| 73 |
/* PCAN-USB USB message record status/len field */ |
| 74 |
#define PCAN_USB_STATUSLEN_TIMESTAMP (1 << 7) |
| 75 |
#define PCAN_USB_STATUSLEN_INTERNAL (1 << 6) |
| 76 |
#define PCAN_USB_STATUSLEN_EXT_ID (1 << 5) |
| 77 |
#define PCAN_USB_STATUSLEN_RTR (1 << 4) |
| 78 |
#define PCAN_USB_STATUSLEN_DLC (0xf) |
| 79 |
|
| 80 |
/* PCAN-USB 4.1 CAN Id tx extended flags */ |
| 81 |
#define PCAN_USB_TX_SRR 0x01 /* SJA1000 SRR command */ |
| 82 |
#define PCAN_USB_TX_AT 0x02 /* SJA1000 AT command */ |
| 83 |
|
| 84 |
/* PCAN-USB error flags */ |
| 85 |
#define PCAN_USB_ERROR_TXFULL 0x01 |
| 86 |
#define PCAN_USB_ERROR_RXQOVR 0x02 |
| 87 |
#define PCAN_USB_ERROR_BUS_LIGHT 0x04 |
| 88 |
#define PCAN_USB_ERROR_BUS_HEAVY 0x08 |
| 89 |
#define PCAN_USB_ERROR_BUS_OFF 0x10 |
| 90 |
#define PCAN_USB_ERROR_RXQEMPTY 0x20 |
| 91 |
#define PCAN_USB_ERROR_QOVR 0x40 |
| 92 |
#define PCAN_USB_ERROR_TXQFULL 0x80 |
| 93 |
|
| 94 |
#define PCAN_USB_ERROR_BUS (PCAN_USB_ERROR_BUS_LIGHT | \ |
| 95 |
PCAN_USB_ERROR_BUS_HEAVY | \ |
| 96 |
PCAN_USB_ERROR_BUS_OFF) |
| 97 |
|
| 98 |
/* SJA1000 modes */ |
| 99 |
#define SJA1000_MODE_NORMAL 0x00 |
| 100 |
#define SJA1000_MODE_INIT 0x01 |
| 101 |
|
| 102 |
/* |
| 103 |
* tick duration = 42.666 us => |
| 104 |
* (tick_number * 44739243) >> 20 ~ (tick_number * 42666) / 1000 |
| 105 |
* accuracy = 10^-7 |
| 106 |
*/ |
| 107 |
#define PCAN_USB_TS_DIV_SHIFTER 20 |
| 108 |
#define PCAN_USB_TS_US_PER_TICK 44739243 |
| 109 |
|
| 110 |
/* PCAN-USB messages record types */ |
| 111 |
#define PCAN_USB_REC_ERROR 1 |
| 112 |
#define PCAN_USB_REC_ANALOG 2 |
| 113 |
#define PCAN_USB_REC_BUSLOAD 3 |
| 114 |
#define PCAN_USB_REC_TS 4 |
| 115 |
#define PCAN_USB_REC_BUSEVT 5 |
| 116 |
|
| 117 |
/* CAN bus events notifications selection mask */ |
| 118 |
#define PCAN_USB_ERR_RXERR 0x02 /* ask for rxerr counter */ |
| 119 |
#define PCAN_USB_ERR_TXERR 0x04 /* ask for txerr counter */ |
| 120 |
|
| 121 |
/* This mask generates an usb packet each time the state of the bus changes. |
| 122 |
* In other words, its interest is to know which side among rx and tx is |
| 123 |
* responsible of the change of the bus state. |
| 124 |
*/ |
| 125 |
#define PCAN_USB_BERR_MASK (PCAN_USB_ERR_RXERR | PCAN_USB_ERR_TXERR) |
| 126 |
|
| 127 |
/* identify bus event packets with rx/tx error counters */ |
| 128 |
#define PCAN_USB_ERR_CNT_DEC 0x00 /* counters are decreasing */ |
| 129 |
#define PCAN_USB_ERR_CNT_INC 0x80 /* counters are increasing */ |
| 130 |
|
| 131 |
/* private to PCAN-USB adapter */ |
| 132 |
struct pcan_usb { |
| 133 |
struct peak_usb_device dev; |
| 134 |
struct peak_time_ref time_ref; |
| 135 |
struct timer_list restart_timer; |
| 136 |
struct can_berr_counter bec; |
| 137 |
}; |
| 138 |
|
| 139 |
/* incoming message context for decoding */ |
| 140 |
struct pcan_usb_msg_context { |
| 141 |
u16 ts16; |
| 142 |
u8 prev_ts8; |
| 143 |
u8 *ptr; |
| 144 |
u8 *end; |
| 145 |
u8 rec_cnt; |
| 146 |
u8 rec_idx; |
| 147 |
u8 rec_ts_idx; |
| 148 |
struct net_device *netdev; |
| 149 |
struct pcan_usb *pdev; |
| 150 |
}; |
| 151 |
|
| 152 |
/* |
| 153 |
* send a command |
| 154 |
*/ |
| 155 |
static int pcan_usb_send_cmd(struct peak_usb_device *dev, u8 f, u8 n, u8 *p) |
| 156 |
{ |
| 157 |
int err; |
| 158 |
int actual_length; |
| 159 |
|
| 160 |
/* usb device unregistered? */ |
| 161 |
if (!(dev->state & PCAN_USB_STATE_CONNECTED)) |
| 162 |
return 0; |
| 163 |
|
| 164 |
dev->cmd_buf[PCAN_USB_CMD_FUNC] = f; |
| 165 |
dev->cmd_buf[PCAN_USB_CMD_NUM] = n; |
| 166 |
|
| 167 |
if (p) |
| 168 |
memcpy(dev->cmd_buf + PCAN_USB_CMD_ARGS, |
| 169 |
p, PCAN_USB_CMD_ARGS_LEN); |
| 170 |
|
| 171 |
err = usb_bulk_msg(dev->udev, |
| 172 |
usb_sndbulkpipe(dev->udev, PCAN_USB_EP_CMDOUT), |
| 173 |
dev->cmd_buf, PCAN_USB_CMD_LEN, &actual_length, |
| 174 |
PCAN_USB_COMMAND_TIMEOUT); |
| 175 |
if (err) |
| 176 |
netdev_err(dev->netdev, |
| 177 |
"sending cmd f=0x%x n=0x%x failure: %d\n", |
| 178 |
f, n, err); |
| 179 |
return err; |
| 180 |
} |
| 181 |
|
| 182 |
/* |
| 183 |
* send a command then wait for its response |
| 184 |
*/ |
| 185 |
static int pcan_usb_wait_rsp(struct peak_usb_device *dev, u8 f, u8 n, u8 *p) |
| 186 |
{ |
| 187 |
int err; |
| 188 |
int actual_length; |
| 189 |
|
| 190 |
/* usb device unregistered? */ |
| 191 |
if (!(dev->state & PCAN_USB_STATE_CONNECTED)) |
| 192 |
return 0; |
| 193 |
|
| 194 |
/* first, send command */ |
| 195 |
err = pcan_usb_send_cmd(dev, f, n, NULL); |
| 196 |
if (err) |
| 197 |
return err; |
| 198 |
|
| 199 |
err = usb_bulk_msg(dev->udev, |
| 200 |
usb_rcvbulkpipe(dev->udev, PCAN_USB_EP_CMDIN), |
| 201 |
dev->cmd_buf, PCAN_USB_CMD_LEN, &actual_length, |
| 202 |
PCAN_USB_COMMAND_TIMEOUT); |
| 203 |
if (err) |
| 204 |
netdev_err(dev->netdev, |
| 205 |
"waiting rsp f=0x%x n=0x%x failure: %d\n", f, n, err); |
| 206 |
else if (p) |
| 207 |
memcpy(p, dev->cmd_buf + PCAN_USB_CMD_ARGS, |
| 208 |
PCAN_USB_CMD_ARGS_LEN); |
| 209 |
|
| 210 |
return err; |
| 211 |
} |
| 212 |
|
| 213 |
static int pcan_usb_set_sja1000(struct peak_usb_device *dev, u8 mode) |
| 214 |
{ |
| 215 |
u8 args[PCAN_USB_CMD_ARGS_LEN] = { |
| 216 |
[1] = mode, |
| 217 |
}; |
| 218 |
|
| 219 |
return pcan_usb_send_cmd(dev, PCAN_USB_CMD_REGISTER, PCAN_USB_SET, |
| 220 |
args); |
| 221 |
} |
| 222 |
|
| 223 |
static int pcan_usb_set_bus(struct peak_usb_device *dev, u8 onoff) |
| 224 |
{ |
| 225 |
u8 args[PCAN_USB_CMD_ARGS_LEN] = { |
| 226 |
[0] = !!onoff, |
| 227 |
}; |
| 228 |
|
| 229 |
return pcan_usb_send_cmd(dev, PCAN_USB_CMD_SET_BUS, PCAN_USB_BUS_XCVER, |
| 230 |
args); |
| 231 |
} |
| 232 |
|
| 233 |
static int pcan_usb_set_silent(struct peak_usb_device *dev, u8 onoff) |
| 234 |
{ |
| 235 |
u8 args[PCAN_USB_CMD_ARGS_LEN] = { |
| 236 |
[0] = !!onoff, |
| 237 |
}; |
| 238 |
|
| 239 |
return pcan_usb_send_cmd(dev, PCAN_USB_CMD_SET_BUS, |
| 240 |
PCAN_USB_BUS_SILENT_MODE, args); |
| 241 |
} |
| 242 |
|
| 243 |
/* send the cmd to be notified from bus errors */ |
| 244 |
static int pcan_usb_set_err_frame(struct peak_usb_device *dev, u8 err_mask) |
| 245 |
{ |
| 246 |
u8 args[PCAN_USB_CMD_ARGS_LEN] = { |
| 247 |
[0] = err_mask, |
| 248 |
}; |
| 249 |
|
| 250 |
return pcan_usb_send_cmd(dev, PCAN_USB_CMD_ERR_FR, PCAN_USB_SET, args); |
| 251 |
} |
| 252 |
|
| 253 |
static int pcan_usb_set_ext_vcc(struct peak_usb_device *dev, u8 onoff) |
| 254 |
{ |
| 255 |
u8 args[PCAN_USB_CMD_ARGS_LEN] = { |
| 256 |
[0] = !!onoff, |
| 257 |
}; |
| 258 |
|
| 259 |
return pcan_usb_send_cmd(dev, PCAN_USB_CMD_EXT_VCC, PCAN_USB_SET, args); |
| 260 |
} |
| 261 |
|
| 262 |
static int pcan_usb_set_led(struct peak_usb_device *dev, u8 onoff) |
| 263 |
{ |
| 264 |
u8 args[PCAN_USB_CMD_ARGS_LEN] = { |
| 265 |
[0] = !!onoff, |
| 266 |
}; |
| 267 |
|
| 268 |
return pcan_usb_send_cmd(dev, PCAN_USB_CMD_LED, PCAN_USB_SET, args); |
| 269 |
} |
| 270 |
|
| 271 |
/* |
| 272 |
* set bittiming value to can |
| 273 |
*/ |
| 274 |
static int pcan_usb_set_bittiming(struct peak_usb_device *dev, |
| 275 |
struct can_bittiming *bt) |
| 276 |
{ |
| 277 |
u8 args[PCAN_USB_CMD_ARGS_LEN]; |
| 278 |
u8 btr0, btr1; |
| 279 |
|
| 280 |
btr0 = ((bt->brp - 1) & 0x3f) | (((bt->sjw - 1) & 0x3) << 6); |
| 281 |
btr1 = ((bt->prop_seg + bt->phase_seg1 - 1) & 0xf) | |
| 282 |
(((bt->phase_seg2 - 1) & 0x7) << 4); |
| 283 |
if (dev->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES) |
| 284 |
btr1 |= 0x80; |
| 285 |
|
| 286 |
netdev_info(dev->netdev, "setting BTR0=0x%02x BTR1=0x%02x\n", |
| 287 |
btr0, btr1); |
| 288 |
|
| 289 |
args[0] = btr1; |
| 290 |
args[1] = btr0; |
| 291 |
|
| 292 |
return pcan_usb_send_cmd(dev, PCAN_USB_CMD_BITRATE, PCAN_USB_SET, args); |
| 293 |
} |
| 294 |
|
| 295 |
/* |
| 296 |
* init/reset can |
| 297 |
*/ |
| 298 |
static int pcan_usb_write_mode(struct peak_usb_device *dev, u8 onoff) |
| 299 |
{ |
| 300 |
int err; |
| 301 |
|
| 302 |
err = pcan_usb_set_bus(dev, onoff); |
| 303 |
if (err) |
| 304 |
return err; |
| 305 |
|
| 306 |
if (!onoff) { |
| 307 |
err = pcan_usb_set_sja1000(dev, SJA1000_MODE_INIT); |
| 308 |
} else { |
| 309 |
/* the PCAN-USB needs time to init */ |
| 310 |
set_current_state(TASK_INTERRUPTIBLE); |
| 311 |
schedule_timeout(msecs_to_jiffies(PCAN_USB_STARTUP_TIMEOUT)); |
| 312 |
} |
| 313 |
|
| 314 |
return err; |
| 315 |
} |
| 316 |
|
| 317 |
/* |
| 318 |
* handle end of waiting for the device to reset |
| 319 |
*/ |
| 320 |
static void pcan_usb_restart(struct timer_list *t) |
| 321 |
{ |
| 322 |
struct pcan_usb *pdev = timer_container_of(pdev, t, restart_timer); |
| 323 |
struct peak_usb_device *dev = &pdev->dev; |
| 324 |
|
| 325 |
/* notify candev and netdev */ |
| 326 |
peak_usb_restart_complete(dev); |
| 327 |
} |
| 328 |
|
| 329 |
/* |
| 330 |
* handle the submission of the restart urb |
| 331 |
*/ |
| 332 |
static void pcan_usb_restart_pending(struct urb *urb) |
| 333 |
{ |
| 334 |
struct pcan_usb *pdev = urb->context; |
| 335 |
|
| 336 |
/* the PCAN-USB needs time to restart */ |
| 337 |
mod_timer(&pdev->restart_timer, |
| 338 |
jiffies + msecs_to_jiffies(PCAN_USB_STARTUP_TIMEOUT)); |
| 339 |
|
| 340 |
/* can delete usb resources */ |
| 341 |
peak_usb_async_complete(urb); |
| 342 |
} |
| 343 |
|
| 344 |
/* |
| 345 |
* handle asynchronous restart |
| 346 |
*/ |
| 347 |
static int pcan_usb_restart_async(struct peak_usb_device *dev, struct urb *urb, |
| 348 |
u8 *buf) |
| 349 |
{ |
| 350 |
struct pcan_usb *pdev = container_of(dev, struct pcan_usb, dev); |
| 351 |
|
| 352 |
if (timer_pending(&pdev->restart_timer)) |
| 353 |
return -EBUSY; |
| 354 |
|
| 355 |
/* set bus on */ |
| 356 |
buf[PCAN_USB_CMD_FUNC] = 3; |
| 357 |
buf[PCAN_USB_CMD_NUM] = 2; |
| 358 |
buf[PCAN_USB_CMD_ARGS] = 1; |
| 359 |
|
| 360 |
usb_fill_bulk_urb(urb, dev->udev, |
| 361 |
usb_sndbulkpipe(dev->udev, PCAN_USB_EP_CMDOUT), |
| 362 |
buf, PCAN_USB_CMD_LEN, |
| 363 |
pcan_usb_restart_pending, pdev); |
| 364 |
|
| 365 |
return usb_submit_urb(urb, GFP_ATOMIC); |
| 366 |
} |
| 367 |
|
| 368 |
/* |
| 369 |
* read serial number from device |
| 370 |
*/ |
| 371 |
static int pcan_usb_get_serial(struct peak_usb_device *dev, u32 *serial_number) |
| 372 |
{ |
| 373 |
u8 args[PCAN_USB_CMD_ARGS_LEN]; |
| 374 |
int err; |
| 375 |
|
| 376 |
err = pcan_usb_wait_rsp(dev, PCAN_USB_CMD_SN, PCAN_USB_GET, args); |
| 377 |
if (err) |
| 378 |
return err; |
| 379 |
*serial_number = le32_to_cpup((__le32 *)args); |
| 380 |
|
| 381 |
return 0; |
| 382 |
} |
| 383 |
|
| 384 |
/* |
| 385 |
* read can channel id from device |
| 386 |
*/ |
| 387 |
static int pcan_usb_get_can_channel_id(struct peak_usb_device *dev, u32 *can_ch_id) |
| 388 |
{ |
| 389 |
u8 args[PCAN_USB_CMD_ARGS_LEN]; |
| 390 |
int err; |
| 391 |
|
| 392 |
err = pcan_usb_wait_rsp(dev, PCAN_USB_CMD_DEVID, PCAN_USB_GET, args); |
| 393 |
if (err) |
| 394 |
netdev_err(dev->netdev, "getting can channel id failure: %d\n", err); |
| 395 |
|
| 396 |
else |
| 397 |
*can_ch_id = args[0]; |
| 398 |
|
| 399 |
return err; |
| 400 |
} |
| 401 |
|
| 402 |
/* set a new CAN channel id in the flash memory of the device */ |
| 403 |
static int pcan_usb_set_can_channel_id(struct peak_usb_device *dev, u32 can_ch_id) |
| 404 |
{ |
| 405 |
u8 args[PCAN_USB_CMD_ARGS_LEN]; |
| 406 |
|
| 407 |
/* this kind of device supports 8-bit values only */ |
| 408 |
if (can_ch_id > U8_MAX) |
| 409 |
return -EINVAL; |
| 410 |
|
| 411 |
/* during the flash process the device disconnects during ~1.25 s.: |
| 412 |
* prohibit access when interface is UP |
| 413 |
*/ |
| 414 |
if (dev->netdev->flags & IFF_UP) |
| 415 |
return -EBUSY; |
| 416 |
|
| 417 |
args[0] = can_ch_id; |
| 418 |
return pcan_usb_send_cmd(dev, PCAN_USB_CMD_DEVID, PCAN_USB_SET, args); |
| 419 |
} |
| 420 |
|
| 421 |
/* |
| 422 |
* update current time ref with received timestamp |
| 423 |
*/ |
| 424 |
static int pcan_usb_update_ts(struct pcan_usb_msg_context *mc) |
| 425 |
{ |
| 426 |
if ((mc->ptr + 2) > mc->end) |
| 427 |
return -EINVAL; |
| 428 |
|
| 429 |
mc->ts16 = get_unaligned_le16(mc->ptr); |
| 430 |
|
| 431 |
if (mc->rec_idx > 0) |
| 432 |
peak_usb_update_ts_now(&mc->pdev->time_ref, mc->ts16); |
| 433 |
else |
| 434 |
peak_usb_set_ts_now(&mc->pdev->time_ref, mc->ts16); |
| 435 |
|
| 436 |
return 0; |
| 437 |
} |
| 438 |
|
| 439 |
/* |
| 440 |
* decode received timestamp |
| 441 |
*/ |
| 442 |
static int pcan_usb_decode_ts(struct pcan_usb_msg_context *mc, u8 first_packet) |
| 443 |
{ |
| 444 |
/* only 1st packet supplies a word timestamp */ |
| 445 |
if (first_packet) { |
| 446 |
if ((mc->ptr + 2) > mc->end) |
| 447 |
return -EINVAL; |
| 448 |
|
| 449 |
mc->ts16 = get_unaligned_le16(mc->ptr); |
| 450 |
mc->prev_ts8 = mc->ts16 & 0x00ff; |
| 451 |
|
| 452 |
mc->ptr += 2; |
| 453 |
} else { |
| 454 |
u8 ts8; |
| 455 |
|
| 456 |
if ((mc->ptr + 1) > mc->end) |
| 457 |
return -EINVAL; |
| 458 |
|
| 459 |
ts8 = *mc->ptr++; |
| 460 |
|
| 461 |
if (ts8 < mc->prev_ts8) |
| 462 |
mc->ts16 += 0x100; |
| 463 |
|
| 464 |
mc->ts16 &= 0xff00; |
| 465 |
mc->ts16 |= ts8; |
| 466 |
mc->prev_ts8 = ts8; |
| 467 |
} |
| 468 |
|
| 469 |
return 0; |
| 470 |
} |
| 471 |
|
| 472 |
static int pcan_usb_decode_error(struct pcan_usb_msg_context *mc, u8 n, |
| 473 |
u8 status_len) |
| 474 |
{ |
| 475 |
struct sk_buff *skb; |
| 476 |
struct can_frame *cf; |
| 477 |
enum can_state new_state = CAN_STATE_ERROR_ACTIVE; |
| 478 |
|
| 479 |
/* ignore this error until 1st ts received */ |
| 480 |
if (n == PCAN_USB_ERROR_QOVR) |
| 481 |
if (!mc->pdev->time_ref.tick_count) |
| 482 |
return 0; |
| 483 |
|
| 484 |
/* allocate an skb to store the error frame */ |
| 485 |
skb = alloc_can_err_skb(mc->netdev, &cf); |
| 486 |
|
| 487 |
if (n & PCAN_USB_ERROR_RXQOVR) { |
| 488 |
/* data overrun interrupt */ |
| 489 |
netdev_dbg(mc->netdev, "data overrun interrupt\n"); |
| 490 |
mc->netdev->stats.rx_over_errors++; |
| 491 |
mc->netdev->stats.rx_errors++; |
| 492 |
if (cf) { |
| 493 |
cf->can_id |= CAN_ERR_CRTL; |
| 494 |
cf->data[1] |= CAN_ERR_CRTL_RX_OVERFLOW; |
| 495 |
} |
| 496 |
} |
| 497 |
|
| 498 |
if (n & PCAN_USB_ERROR_TXQFULL) |
| 499 |
netdev_dbg(mc->netdev, "device Tx queue full)\n"); |
| 500 |
|
| 501 |
if (n & PCAN_USB_ERROR_BUS_OFF) { |
| 502 |
new_state = CAN_STATE_BUS_OFF; |
| 503 |
} else if (n & PCAN_USB_ERROR_BUS_HEAVY) { |
| 504 |
new_state = ((mc->pdev->bec.txerr >= 128) || |
| 505 |
(mc->pdev->bec.rxerr >= 128)) ? |
| 506 |
CAN_STATE_ERROR_PASSIVE : |
| 507 |
CAN_STATE_ERROR_WARNING; |
| 508 |
} else { |
| 509 |
new_state = CAN_STATE_ERROR_ACTIVE; |
| 510 |
} |
| 511 |
|
| 512 |
/* handle change of state */ |
| 513 |
if (new_state != mc->pdev->dev.can.state) { |
| 514 |
enum can_state tx_state = |
| 515 |
(mc->pdev->bec.txerr >= mc->pdev->bec.rxerr) ? |
| 516 |
new_state : 0; |
| 517 |
enum can_state rx_state = |
| 518 |
(mc->pdev->bec.txerr <= mc->pdev->bec.rxerr) ? |
| 519 |
new_state : 0; |
| 520 |
|
| 521 |
can_change_state(mc->netdev, cf, tx_state, rx_state); |
| 522 |
|
| 523 |
if (new_state == CAN_STATE_BUS_OFF) { |
| 524 |
can_bus_off(mc->netdev); |
| 525 |
} else if (cf && (cf->can_id & CAN_ERR_CRTL)) { |
| 526 |
/* Supply TX/RX error counters in case of |
| 527 |
* controller error. |
| 528 |
*/ |
| 529 |
cf->can_id = CAN_ERR_CNT; |
| 530 |
cf->data[6] = mc->pdev->bec.txerr; |
| 531 |
cf->data[7] = mc->pdev->bec.rxerr; |
| 532 |
} |
| 533 |
} |
| 534 |
|
| 535 |
if (!skb) |
| 536 |
return -ENOMEM; |
| 537 |
|
| 538 |
if (status_len & PCAN_USB_STATUSLEN_TIMESTAMP) { |
| 539 |
struct skb_shared_hwtstamps *hwts = skb_hwtstamps(skb); |
| 540 |
|
| 541 |
peak_usb_get_ts_time(&mc->pdev->time_ref, mc->ts16, |
| 542 |
&hwts->hwtstamp); |
| 543 |
} |
| 544 |
|
| 545 |
netif_rx(skb); |
| 546 |
|
| 547 |
return 0; |
| 548 |
} |
| 549 |
|
| 550 |
/* decode bus event usb packet: first byte contains rxerr while 2nd one contains |
| 551 |
* txerr. |
| 552 |
*/ |
| 553 |
static int pcan_usb_handle_bus_evt(struct pcan_usb_msg_context *mc, u8 ir) |
| 554 |
{ |
| 555 |
struct pcan_usb *pdev = mc->pdev; |
| 556 |
|
| 557 |
/* according to the content of the packet */ |
| 558 |
switch (ir) { |
| 559 |
case PCAN_USB_ERR_CNT_DEC: |
| 560 |
case PCAN_USB_ERR_CNT_INC: |
| 561 |
|
| 562 |
/* save rx/tx error counters from in the device context */ |
| 563 |
pdev->bec.rxerr = mc->ptr[1]; |
| 564 |
pdev->bec.txerr = mc->ptr[2]; |
| 565 |
break; |
| 566 |
|
| 567 |
default: |
| 568 |
/* reserved */ |
| 569 |
break; |
| 570 |
} |
| 571 |
|
| 572 |
return 0; |
| 573 |
} |
| 574 |
|
| 575 |
/* |
| 576 |
* decode non-data usb message |
| 577 |
*/ |
| 578 |
static int pcan_usb_decode_status(struct pcan_usb_msg_context *mc, |
| 579 |
u8 status_len) |
| 580 |
{ |
| 581 |
u8 rec_len = status_len & PCAN_USB_STATUSLEN_DLC; |
| 582 |
u8 f, n; |
| 583 |
int err; |
| 584 |
|
| 585 |
/* check whether function and number can be read */ |
| 586 |
if ((mc->ptr + 2) > mc->end) |
| 587 |
return -EINVAL; |
| 588 |
|
| 589 |
f = mc->ptr[PCAN_USB_CMD_FUNC]; |
| 590 |
n = mc->ptr[PCAN_USB_CMD_NUM]; |
| 591 |
mc->ptr += PCAN_USB_CMD_ARGS; |
| 592 |
|
| 593 |
if (status_len & PCAN_USB_STATUSLEN_TIMESTAMP) { |
| 594 |
int err = pcan_usb_decode_ts(mc, !mc->rec_ts_idx); |
| 595 |
|
| 596 |
if (err) |
| 597 |
return err; |
| 598 |
|
| 599 |
/* Next packet in the buffer will have a timestamp on a single |
| 600 |
* byte |
| 601 |
*/ |
| 602 |
mc->rec_ts_idx++; |
| 603 |
} |
| 604 |
|
| 605 |
switch (f) { |
| 606 |
case PCAN_USB_REC_ERROR: |
| 607 |
err = pcan_usb_decode_error(mc, n, status_len); |
| 608 |
if (err) |
| 609 |
return err; |
| 610 |
break; |
| 611 |
|
| 612 |
case PCAN_USB_REC_ANALOG: |
| 613 |
/* analog values (ignored) */ |
| 614 |
rec_len = 2; |
| 615 |
break; |
| 616 |
|
| 617 |
case PCAN_USB_REC_BUSLOAD: |
| 618 |
/* bus load (ignored) */ |
| 619 |
rec_len = 1; |
| 620 |
break; |
| 621 |
|
| 622 |
case PCAN_USB_REC_TS: |
| 623 |
/* only timestamp */ |
| 624 |
if (pcan_usb_update_ts(mc)) |
| 625 |
return -EINVAL; |
| 626 |
break; |
| 627 |
|
| 628 |
case PCAN_USB_REC_BUSEVT: |
| 629 |
/* bus event notifications (get rxerr/txerr) */ |
| 630 |
err = pcan_usb_handle_bus_evt(mc, n); |
| 631 |
if (err) |
| 632 |
return err; |
| 633 |
break; |
| 634 |
default: |
| 635 |
netdev_err(mc->netdev, "unexpected function %u\n", f); |
| 636 |
break; |
| 637 |
} |
| 638 |
|
| 639 |
if ((mc->ptr + rec_len) > mc->end) |
| 640 |
return -EINVAL; |
| 641 |
|
| 642 |
mc->ptr += rec_len; |
| 643 |
|
| 644 |
return 0; |
| 645 |
} |
| 646 |
|
| 647 |
/* |
| 648 |
* decode data usb message |
| 649 |
*/ |
| 650 |
static int pcan_usb_decode_data(struct pcan_usb_msg_context *mc, u8 status_len) |
| 651 |
{ |
| 652 |
u8 rec_len = status_len & PCAN_USB_STATUSLEN_DLC; |
| 653 |
struct sk_buff *skb; |
| 654 |
struct can_frame *cf; |
| 655 |
struct skb_shared_hwtstamps *hwts; |
| 656 |
u32 can_id_flags; |
| 657 |
|
| 658 |
skb = alloc_can_skb(mc->netdev, &cf); |
| 659 |
if (!skb) |
| 660 |
return -ENOMEM; |
| 661 |
|
| 662 |
if (status_len & PCAN_USB_STATUSLEN_EXT_ID) { |
| 663 |
if ((mc->ptr + 4) > mc->end) |
| 664 |
goto decode_failed; |
| 665 |
|
| 666 |
can_id_flags = get_unaligned_le32(mc->ptr); |
| 667 |
cf->can_id = can_id_flags >> 3 | CAN_EFF_FLAG; |
| 668 |
mc->ptr += 4; |
| 669 |
} else { |
| 670 |
if ((mc->ptr + 2) > mc->end) |
| 671 |
goto decode_failed; |
| 672 |
|
| 673 |
can_id_flags = get_unaligned_le16(mc->ptr); |
| 674 |
cf->can_id = can_id_flags >> 5; |
| 675 |
mc->ptr += 2; |
| 676 |
} |
| 677 |
|
| 678 |
can_frame_set_cc_len(cf, rec_len, mc->pdev->dev.can.ctrlmode); |
| 679 |
|
| 680 |
/* Only first packet timestamp is a word */ |
| 681 |
if (pcan_usb_decode_ts(mc, !mc->rec_ts_idx)) |
| 682 |
goto decode_failed; |
| 683 |
|
| 684 |
/* Next packet in the buffer will have a timestamp on a single byte */ |
| 685 |
mc->rec_ts_idx++; |
| 686 |
|
| 687 |
/* read data */ |
| 688 |
memset(cf->data, 0x0, sizeof(cf->data)); |
| 689 |
if (status_len & PCAN_USB_STATUSLEN_RTR) { |
| 690 |
cf->can_id |= CAN_RTR_FLAG; |
| 691 |
} else { |
| 692 |
if ((mc->ptr + rec_len) > mc->end) |
| 693 |
goto decode_failed; |
| 694 |
|
| 695 |
memcpy(cf->data, mc->ptr, cf->len); |
| 696 |
mc->ptr += rec_len; |
| 697 |
|
| 698 |
/* Ignore next byte (client private id) if SRR bit is set */ |
| 699 |
if (can_id_flags & PCAN_USB_TX_SRR) |
| 700 |
mc->ptr++; |
| 701 |
|
| 702 |
/* update statistics */ |
| 703 |
mc->netdev->stats.rx_bytes += cf->len; |
| 704 |
} |
| 705 |
mc->netdev->stats.rx_packets++; |
| 706 |
|
| 707 |
/* convert timestamp into kernel time */ |
| 708 |
hwts = skb_hwtstamps(skb); |
| 709 |
peak_usb_get_ts_time(&mc->pdev->time_ref, mc->ts16, &hwts->hwtstamp); |
| 710 |
|
| 711 |
/* push the skb */ |
| 712 |
netif_rx(skb); |
| 713 |
|
| 714 |
return 0; |
| 715 |
|
| 716 |
decode_failed: |
| 717 |
dev_kfree_skb(skb); |
| 718 |
return -EINVAL; |
| 719 |
} |
| 720 |
|
| 721 |
/* |
| 722 |
* process incoming message |
| 723 |
*/ |
| 724 |
static int pcan_usb_decode_msg(struct peak_usb_device *dev, u8 *ibuf, u32 lbuf) |
| 725 |
{ |
| 726 |
struct pcan_usb_msg_context mc = { |
| 727 |
.rec_cnt = ibuf[1], |
| 728 |
.ptr = ibuf + PCAN_USB_MSG_HEADER_LEN, |
| 729 |
.end = ibuf + lbuf, |
| 730 |
.netdev = dev->netdev, |
| 731 |
.pdev = container_of(dev, struct pcan_usb, dev), |
| 732 |
}; |
| 733 |
int err; |
| 734 |
|
| 735 |
for (err = 0; mc.rec_idx < mc.rec_cnt && !err; mc.rec_idx++) { |
| 736 |
u8 sl = *mc.ptr++; |
| 737 |
|
| 738 |
/* handle status and error frames here */ |
| 739 |
if (sl & PCAN_USB_STATUSLEN_INTERNAL) { |
| 740 |
err = pcan_usb_decode_status(&mc, sl); |
| 741 |
/* handle normal can frames here */ |
| 742 |
} else { |
| 743 |
err = pcan_usb_decode_data(&mc, sl); |
| 744 |
} |
| 745 |
} |
| 746 |
|
| 747 |
return err; |
| 748 |
} |
| 749 |
|
| 750 |
/* |
| 751 |
* process any incoming buffer |
| 752 |
*/ |
| 753 |
static int pcan_usb_decode_buf(struct peak_usb_device *dev, struct urb *urb) |
| 754 |
{ |
| 755 |
int err = 0; |
| 756 |
|
| 757 |
if (urb->actual_length > PCAN_USB_MSG_HEADER_LEN) { |
| 758 |
err = pcan_usb_decode_msg(dev, urb->transfer_buffer, |
| 759 |
urb->actual_length); |
| 760 |
|
| 761 |
} else if (urb->actual_length > 0) { |
| 762 |
netdev_err(dev->netdev, "usb message length error (%u)\n", |
| 763 |
urb->actual_length); |
| 764 |
err = -EINVAL; |
| 765 |
} |
| 766 |
|
| 767 |
return err; |
| 768 |
} |
| 769 |
|
| 770 |
/* |
| 771 |
* process outgoing packet |
| 772 |
*/ |
| 773 |
static int pcan_usb_encode_msg(struct peak_usb_device *dev, struct sk_buff *skb, |
| 774 |
u8 *obuf, size_t *size) |
| 775 |
{ |
| 776 |
struct net_device *netdev = dev->netdev; |
| 777 |
struct net_device_stats *stats = &netdev->stats; |
| 778 |
struct can_frame *cf = (struct can_frame *)skb->data; |
| 779 |
u32 can_id_flags = cf->can_id & CAN_ERR_MASK; |
| 780 |
u8 *pc; |
| 781 |
|
| 782 |
obuf[0] = PCAN_USB_MSG_TX_CAN; |
| 783 |
obuf[1] = 1; /* only one CAN frame is stored in the packet */ |
| 784 |
|
| 785 |
pc = obuf + PCAN_USB_MSG_HEADER_LEN; |
| 786 |
|
| 787 |
/* status/len byte */ |
| 788 |
*pc = can_get_cc_dlc(cf, dev->can.ctrlmode); |
| 789 |
|
| 790 |
if (cf->can_id & CAN_RTR_FLAG) |
| 791 |
*pc |= PCAN_USB_STATUSLEN_RTR; |
| 792 |
|
| 793 |
/* can id */ |
| 794 |
if (cf->can_id & CAN_EFF_FLAG) { |
| 795 |
*pc |= PCAN_USB_STATUSLEN_EXT_ID; |
| 796 |
pc++; |
| 797 |
|
| 798 |
can_id_flags <<= 3; |
| 799 |
|
| 800 |
if (dev->can.ctrlmode & CAN_CTRLMODE_LOOPBACK) |
| 801 |
can_id_flags |= PCAN_USB_TX_SRR; |
| 802 |
|
| 803 |
if (dev->can.ctrlmode & CAN_CTRLMODE_ONE_SHOT) |
| 804 |
can_id_flags |= PCAN_USB_TX_AT; |
| 805 |
|
| 806 |
put_unaligned_le32(can_id_flags, pc); |
| 807 |
pc += 4; |
| 808 |
} else { |
| 809 |
pc++; |
| 810 |
|
| 811 |
can_id_flags <<= 5; |
| 812 |
|
| 813 |
if (dev->can.ctrlmode & CAN_CTRLMODE_LOOPBACK) |
| 814 |
can_id_flags |= PCAN_USB_TX_SRR; |
| 815 |
|
| 816 |
if (dev->can.ctrlmode & CAN_CTRLMODE_ONE_SHOT) |
| 817 |
can_id_flags |= PCAN_USB_TX_AT; |
| 818 |
|
| 819 |
put_unaligned_le16(can_id_flags, pc); |
| 820 |
pc += 2; |
| 821 |
} |
| 822 |
|
| 823 |
/* can data */ |
| 824 |
if (!(cf->can_id & CAN_RTR_FLAG)) { |
| 825 |
memcpy(pc, cf->data, cf->len); |
| 826 |
pc += cf->len; |
| 827 |
} |
| 828 |
|
| 829 |
/* SRR bit needs a writer id (useless here) */ |
| 830 |
if (can_id_flags & PCAN_USB_TX_SRR) |
| 831 |
*pc++ = 0x80; |
| 832 |
|
| 833 |
obuf[(*size)-1] = (u8)(stats->tx_packets & 0xff); |
| 834 |
|
| 835 |
return 0; |
| 836 |
} |
| 837 |
|
| 838 |
/* socket callback used to copy berr counters values received through USB */ |
| 839 |
static int pcan_usb_get_berr_counter(const struct net_device *netdev, |
| 840 |
struct can_berr_counter *bec) |
| 841 |
{ |
| 842 |
struct peak_usb_device *dev = netdev_priv(netdev); |
| 843 |
struct pcan_usb *pdev = container_of(dev, struct pcan_usb, dev); |
| 844 |
|
| 845 |
*bec = pdev->bec; |
| 846 |
|
| 847 |
/* must return 0 */ |
| 848 |
return 0; |
| 849 |
} |
| 850 |
|
| 851 |
/* |
| 852 |
* start interface |
| 853 |
*/ |
| 854 |
static int pcan_usb_start(struct peak_usb_device *dev) |
| 855 |
{ |
| 856 |
struct pcan_usb *pdev = container_of(dev, struct pcan_usb, dev); |
| 857 |
int err; |
| 858 |
|
| 859 |
/* number of bits used in timestamps read from adapter struct */ |
| 860 |
peak_usb_init_time_ref(&pdev->time_ref, &pcan_usb); |
| 861 |
|
| 862 |
pdev->bec.rxerr = 0; |
| 863 |
pdev->bec.txerr = 0; |
| 864 |
|
| 865 |
/* always ask the device for BERR reporting, to be able to switch from |
| 866 |
* WARNING to PASSIVE state |
| 867 |
*/ |
| 868 |
err = pcan_usb_set_err_frame(dev, PCAN_USB_BERR_MASK); |
| 869 |
if (err) |
| 870 |
netdev_warn(dev->netdev, |
| 871 |
"Asking for BERR reporting error %u\n", |
| 872 |
err); |
| 873 |
|
| 874 |
/* if revision greater than 3, can put silent mode on/off */ |
| 875 |
if (dev->device_rev > 3) { |
| 876 |
err = pcan_usb_set_silent(dev, |
| 877 |
dev->can.ctrlmode & CAN_CTRLMODE_LISTENONLY); |
| 878 |
if (err) |
| 879 |
return err; |
| 880 |
} |
| 881 |
|
| 882 |
return pcan_usb_set_ext_vcc(dev, 0); |
| 883 |
} |
| 884 |
|
| 885 |
static int pcan_usb_init(struct peak_usb_device *dev) |
| 886 |
{ |
| 887 |
struct pcan_usb *pdev = container_of(dev, struct pcan_usb, dev); |
| 888 |
u32 serial_number; |
| 889 |
int err; |
| 890 |
|
| 891 |
/* initialize a timer needed to wait for hardware restart */ |
| 892 |
timer_setup(&pdev->restart_timer, pcan_usb_restart, 0); |
| 893 |
|
| 894 |
/* |
| 895 |
* explicit use of dev_xxx() instead of netdev_xxx() here: |
| 896 |
* information displayed are related to the device itself, not |
| 897 |
* to the canx netdevice. |
| 898 |
*/ |
| 899 |
err = pcan_usb_get_serial(dev, &serial_number); |
| 900 |
if (err) { |
| 901 |
dev_err(dev->netdev->dev.parent, |
| 902 |
"unable to read %s serial number (err %d)\n", |
| 903 |
pcan_usb.name, err); |
| 904 |
return err; |
| 905 |
} |
| 906 |
|
| 907 |
dev_info(dev->netdev->dev.parent, |
| 908 |
"PEAK-System %s adapter hwrev %u serial %08X (%u channel)\n", |
| 909 |
pcan_usb.name, dev->device_rev, serial_number, |
| 910 |
pcan_usb.ctrl_count); |
| 911 |
|
| 912 |
/* Since rev 4.1, PCAN-USB is able to make single-shot as well as |
| 913 |
* looped back frames. |
| 914 |
*/ |
| 915 |
if (dev->device_rev >= 41) { |
| 916 |
struct can_priv *priv = netdev_priv(dev->netdev); |
| 917 |
|
| 918 |
priv->ctrlmode_supported |= CAN_CTRLMODE_ONE_SHOT | |
| 919 |
CAN_CTRLMODE_LOOPBACK; |
| 920 |
} else { |
| 921 |
dev_info(dev->netdev->dev.parent, |
| 922 |
"Firmware update available. Please contact [email protected]\n"); |
| 923 |
} |
| 924 |
|
| 925 |
return 0; |
| 926 |
} |
| 927 |
|
| 928 |
/* |
| 929 |
* probe function for new PCAN-USB usb interface |
| 930 |
*/ |
| 931 |
static int pcan_usb_probe(struct usb_interface *intf) |
| 932 |
{ |
| 933 |
struct usb_host_interface *if_desc; |
| 934 |
int i; |
| 935 |
|
| 936 |
if_desc = intf->altsetting; |
| 937 |
|
| 938 |
/* check interface endpoint addresses */ |
| 939 |
for (i = 0; i < if_desc->desc.bNumEndpoints; i++) { |
| 940 |
struct usb_endpoint_descriptor *ep = &if_desc->endpoint[i].desc; |
| 941 |
|
| 942 |
switch (ep->bEndpointAddress) { |
| 943 |
case PCAN_USB_EP_CMDOUT: |
| 944 |
case PCAN_USB_EP_CMDIN: |
| 945 |
case PCAN_USB_EP_MSGOUT: |
| 946 |
case PCAN_USB_EP_MSGIN: |
| 947 |
break; |
| 948 |
default: |
| 949 |
return -ENODEV; |
| 950 |
} |
| 951 |
} |
| 952 |
|
| 953 |
return 0; |
| 954 |
} |
| 955 |
|
| 956 |
static int pcan_usb_set_phys_id(struct net_device *netdev, |
| 957 |
enum ethtool_phys_id_state state) |
| 958 |
{ |
| 959 |
struct peak_usb_device *dev = netdev_priv(netdev); |
| 960 |
int err = 0; |
| 961 |
|
| 962 |
switch (state) { |
| 963 |
case ETHTOOL_ID_ACTIVE: |
| 964 |
/* call ON/OFF twice a second */ |
| 965 |
return 2; |
| 966 |
|
| 967 |
case ETHTOOL_ID_OFF: |
| 968 |
err = pcan_usb_set_led(dev, 0); |
| 969 |
break; |
| 970 |
|
| 971 |
case ETHTOOL_ID_ON: |
| 972 |
fallthrough; |
| 973 |
|
| 974 |
case ETHTOOL_ID_INACTIVE: |
| 975 |
/* restore LED default */ |
| 976 |
err = pcan_usb_set_led(dev, 1); |
| 977 |
break; |
| 978 |
|
| 979 |
default: |
| 980 |
break; |
| 981 |
} |
| 982 |
|
| 983 |
return err; |
| 984 |
} |
| 985 |
|
| 986 |
/* This device only handles 8-bit CAN channel id. */ |
| 987 |
static int pcan_usb_get_eeprom_len(struct net_device *netdev) |
| 988 |
{ |
| 989 |
return sizeof(u8); |
| 990 |
} |
| 991 |
|
| 992 |
static const struct ethtool_ops pcan_usb_ethtool_ops = { |
| 993 |
.set_phys_id = pcan_usb_set_phys_id, |
| 994 |
.get_ts_info = pcan_get_ts_info, |
| 995 |
.get_eeprom_len = pcan_usb_get_eeprom_len, |
| 996 |
.get_eeprom = peak_usb_get_eeprom, |
| 997 |
.set_eeprom = peak_usb_set_eeprom, |
| 998 |
}; |
| 999 |
|
| 1000 |
/* |
| 1001 |
* describe the PCAN-USB adapter |
| 1002 |
*/ |
| 1003 |
static const struct can_bittiming_const pcan_usb_const = { |
| 1004 |
.name = "pcan_usb", |
| 1005 |
.tseg1_min = 1, |
| 1006 |
.tseg1_max = 16, |
| 1007 |
.tseg2_min = 1, |
| 1008 |
.tseg2_max = 8, |
| 1009 |
.sjw_max = 4, |
| 1010 |
.brp_min = 1, |
| 1011 |
.brp_max = 64, |
| 1012 |
.brp_inc = 1, |
| 1013 |
}; |
| 1014 |
|
| 1015 |
const struct peak_usb_adapter pcan_usb = { |
| 1016 |
.name = "PCAN-USB", |
| 1017 |
.device_id = PCAN_USB_PRODUCT_ID, |
| 1018 |
.ctrl_count = 1, |
| 1019 |
.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES | CAN_CTRLMODE_LISTENONLY | |
| 1020 |
CAN_CTRLMODE_CC_LEN8_DLC, |
| 1021 |
.clock = { |
| 1022 |
.freq = PCAN_USB_CRYSTAL_HZ / 2, |
| 1023 |
}, |
| 1024 |
.bittiming_const = &pcan_usb_const, |
| 1025 |
|
| 1026 |
/* size of device private data */ |
| 1027 |
.sizeof_dev_private = sizeof(struct pcan_usb), |
| 1028 |
|
| 1029 |
.ethtool_ops = &pcan_usb_ethtool_ops, |
| 1030 |
|
| 1031 |
/* timestamps usage */ |
| 1032 |
.ts_used_bits = 16, |
| 1033 |
.us_per_ts_scale = PCAN_USB_TS_US_PER_TICK, /* us=(ts*scale) */ |
| 1034 |
.us_per_ts_shift = PCAN_USB_TS_DIV_SHIFTER, /* >> shift */ |
| 1035 |
|
| 1036 |
/* give here messages in/out endpoints */ |
| 1037 |
.ep_msg_in = PCAN_USB_EP_MSGIN, |
| 1038 |
.ep_msg_out = {PCAN_USB_EP_MSGOUT}, |
| 1039 |
|
| 1040 |
/* size of rx/tx usb buffers */ |
| 1041 |
.rx_buffer_size = PCAN_USB_RX_BUFFER_SIZE, |
| 1042 |
.tx_buffer_size = PCAN_USB_TX_BUFFER_SIZE, |
| 1043 |
|
| 1044 |
/* device callbacks */ |
| 1045 |
.intf_probe = pcan_usb_probe, |
| 1046 |
.dev_init = pcan_usb_init, |
| 1047 |
.dev_set_bus = pcan_usb_write_mode, |
| 1048 |
.dev_set_bittiming = pcan_usb_set_bittiming, |
| 1049 |
.dev_get_can_channel_id = pcan_usb_get_can_channel_id, |
| 1050 |
.dev_set_can_channel_id = pcan_usb_set_can_channel_id, |
| 1051 |
.dev_decode_buf = pcan_usb_decode_buf, |
| 1052 |
.dev_encode_msg = pcan_usb_encode_msg, |
| 1053 |
.dev_start = pcan_usb_start, |
| 1054 |
.dev_restart_async = pcan_usb_restart_async, |
| 1055 |
.do_get_berr_counter = pcan_usb_get_berr_counter, |
| 1056 |
}; |