| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
|
| 3 |
/* Driver for Theobroma Systems UCAN devices, Protocol Version 3 |
| 4 |
* |
| 5 |
* Copyright (C) 2018 Theobroma Systems Design und Consulting GmbH |
| 6 |
* |
| 7 |
* |
| 8 |
* General Description: |
| 9 |
* |
| 10 |
* The USB Device uses three Endpoints: |
| 11 |
* |
| 12 |
* CONTROL Endpoint: Is used the setup the device (start, stop, |
| 13 |
* info, configure). |
| 14 |
* |
| 15 |
* IN Endpoint: The device sends CAN Frame Messages and Device |
| 16 |
* Information using the IN endpoint. |
| 17 |
* |
| 18 |
* OUT Endpoint: The driver sends configuration requests, and CAN |
| 19 |
* Frames on the out endpoint. |
| 20 |
* |
| 21 |
* Error Handling: |
| 22 |
* |
| 23 |
* If error reporting is turned on the device encodes error into CAN |
| 24 |
* error frames (see uapi/linux/can/error.h) and sends it using the |
| 25 |
* IN Endpoint. The driver updates statistics and forward it. |
| 26 |
*/ |
| 27 |
|
| 28 |
#include <linux/can.h> |
| 29 |
#include <linux/can/dev.h> |
| 30 |
#include <linux/can/error.h> |
| 31 |
#include <linux/ethtool.h> |
| 32 |
#include <linux/module.h> |
| 33 |
#include <linux/netdevice.h> |
| 34 |
#include <linux/signal.h> |
| 35 |
#include <linux/skbuff.h> |
| 36 |
#include <linux/slab.h> |
| 37 |
#include <linux/usb.h> |
| 38 |
|
| 39 |
#define UCAN_DRIVER_NAME "ucan" |
| 40 |
#define UCAN_MAX_RX_URBS 8 |
| 41 |
/* the CAN controller needs a while to enable/disable the bus */ |
| 42 |
#define UCAN_USB_CTL_PIPE_TIMEOUT 1000 |
| 43 |
/* this driver currently supports protocol version 3 only */ |
| 44 |
#define UCAN_PROTOCOL_VERSION_MIN 3 |
| 45 |
#define UCAN_PROTOCOL_VERSION_MAX 3 |
| 46 |
|
| 47 |
/* UCAN Message Definitions |
| 48 |
* ------------------------ |
| 49 |
* |
| 50 |
* ucan_message_out_t and ucan_message_in_t define the messages |
| 51 |
* transmitted on the OUT and IN endpoint. |
| 52 |
* |
| 53 |
* Multibyte fields are transmitted with little endianness |
| 54 |
* |
| 55 |
* INTR Endpoint: a single uint32_t storing the current space in the fifo |
| 56 |
* |
| 57 |
* OUT Endpoint: single message of type ucan_message_out_t is |
| 58 |
* transmitted on the out endpoint |
| 59 |
* |
| 60 |
* IN Endpoint: multiple messages ucan_message_in_t concateted in |
| 61 |
* the following way: |
| 62 |
* |
| 63 |
* m[n].len <=> the length if message n(including the header in bytes) |
| 64 |
* m[n] is is aligned to a 4 byte boundary, hence |
| 65 |
* offset(m[0]) := 0; |
| 66 |
* offset(m[n+1]) := offset(m[n]) + (m[n].len + 3) & 3 |
| 67 |
* |
| 68 |
* this implies that |
| 69 |
* offset(m[n]) % 4 <=> 0 |
| 70 |
*/ |
| 71 |
|
| 72 |
/* Device Global Commands */ |
| 73 |
enum { |
| 74 |
UCAN_DEVICE_GET_FW_STRING = 0, |
| 75 |
}; |
| 76 |
|
| 77 |
/* UCAN Commands */ |
| 78 |
enum { |
| 79 |
/* start the can transceiver - val defines the operation mode */ |
| 80 |
UCAN_COMMAND_START = 0, |
| 81 |
/* cancel pending transmissions and stop the can transceiver */ |
| 82 |
UCAN_COMMAND_STOP = 1, |
| 83 |
/* send can transceiver into low-power sleep mode */ |
| 84 |
UCAN_COMMAND_SLEEP = 2, |
| 85 |
/* wake up can transceiver from low-power sleep mode */ |
| 86 |
UCAN_COMMAND_WAKEUP = 3, |
| 87 |
/* reset the can transceiver */ |
| 88 |
UCAN_COMMAND_RESET = 4, |
| 89 |
/* get piece of info from the can transceiver - subcmd defines what |
| 90 |
* piece |
| 91 |
*/ |
| 92 |
UCAN_COMMAND_GET = 5, |
| 93 |
/* clear or disable hardware filter - subcmd defines which of the two */ |
| 94 |
UCAN_COMMAND_FILTER = 6, |
| 95 |
/* Setup bittiming */ |
| 96 |
UCAN_COMMAND_SET_BITTIMING = 7, |
| 97 |
/* recover from bus-off state */ |
| 98 |
UCAN_COMMAND_RESTART = 8, |
| 99 |
}; |
| 100 |
|
| 101 |
/* UCAN_COMMAND_START and UCAN_COMMAND_GET_INFO operation modes (bitmap). |
| 102 |
* Undefined bits must be set to 0. |
| 103 |
*/ |
| 104 |
enum { |
| 105 |
UCAN_MODE_LOOPBACK = BIT(0), |
| 106 |
UCAN_MODE_SILENT = BIT(1), |
| 107 |
UCAN_MODE_3_SAMPLES = BIT(2), |
| 108 |
UCAN_MODE_ONE_SHOT = BIT(3), |
| 109 |
UCAN_MODE_BERR_REPORT = BIT(4), |
| 110 |
}; |
| 111 |
|
| 112 |
/* UCAN_COMMAND_GET subcommands */ |
| 113 |
enum { |
| 114 |
UCAN_COMMAND_GET_INFO = 0, |
| 115 |
UCAN_COMMAND_GET_PROTOCOL_VERSION = 1, |
| 116 |
}; |
| 117 |
|
| 118 |
/* UCAN_COMMAND_FILTER subcommands */ |
| 119 |
enum { |
| 120 |
UCAN_FILTER_CLEAR = 0, |
| 121 |
UCAN_FILTER_DISABLE = 1, |
| 122 |
UCAN_FILTER_ENABLE = 2, |
| 123 |
}; |
| 124 |
|
| 125 |
/* OUT endpoint message types */ |
| 126 |
enum { |
| 127 |
UCAN_OUT_TX = 2, /* transmit a CAN frame */ |
| 128 |
}; |
| 129 |
|
| 130 |
/* IN endpoint message types */ |
| 131 |
enum { |
| 132 |
UCAN_IN_TX_COMPLETE = 1, /* CAN frame transmission completed */ |
| 133 |
UCAN_IN_RX = 2, /* CAN frame received */ |
| 134 |
}; |
| 135 |
|
| 136 |
struct ucan_ctl_cmd_start { |
| 137 |
__le16 mode; /* OR-ing any of UCAN_MODE_* */ |
| 138 |
} __packed; |
| 139 |
|
| 140 |
struct ucan_ctl_cmd_set_bittiming { |
| 141 |
__le32 tq; /* Time quanta (TQ) in nanoseconds */ |
| 142 |
__le16 brp; /* TQ Prescaler */ |
| 143 |
__le16 sample_point; /* Samplepoint on tenth percent */ |
| 144 |
u8 prop_seg; /* Propagation segment in TQs */ |
| 145 |
u8 phase_seg1; /* Phase buffer segment 1 in TQs */ |
| 146 |
u8 phase_seg2; /* Phase buffer segment 2 in TQs */ |
| 147 |
u8 sjw; /* Synchronisation jump width in TQs */ |
| 148 |
} __packed; |
| 149 |
|
| 150 |
struct ucan_ctl_cmd_device_info { |
| 151 |
__le32 freq; /* Clock Frequency for tq generation */ |
| 152 |
u8 tx_fifo; /* Size of the transmission fifo */ |
| 153 |
u8 sjw_max; /* can_bittiming fields... */ |
| 154 |
u8 tseg1_min; |
| 155 |
u8 tseg1_max; |
| 156 |
u8 tseg2_min; |
| 157 |
u8 tseg2_max; |
| 158 |
__le16 brp_inc; |
| 159 |
__le32 brp_min; |
| 160 |
__le32 brp_max; /* ...can_bittiming fields */ |
| 161 |
__le16 ctrlmodes; /* supported control modes */ |
| 162 |
__le16 hwfilter; /* Number of HW filter banks */ |
| 163 |
__le16 rxmboxes; /* Number of receive Mailboxes */ |
| 164 |
} __packed; |
| 165 |
|
| 166 |
struct ucan_ctl_cmd_get_protocol_version { |
| 167 |
__le32 version; |
| 168 |
} __packed; |
| 169 |
|
| 170 |
union ucan_ctl_payload { |
| 171 |
/* Setup Bittiming |
| 172 |
* bmRequest == UCAN_COMMAND_START |
| 173 |
*/ |
| 174 |
struct ucan_ctl_cmd_start cmd_start; |
| 175 |
/* Setup Bittiming |
| 176 |
* bmRequest == UCAN_COMMAND_SET_BITTIMING |
| 177 |
*/ |
| 178 |
struct ucan_ctl_cmd_set_bittiming cmd_set_bittiming; |
| 179 |
/* Get Device Information |
| 180 |
* bmRequest == UCAN_COMMAND_GET; wValue = UCAN_COMMAND_GET_INFO |
| 181 |
*/ |
| 182 |
struct ucan_ctl_cmd_device_info cmd_get_device_info; |
| 183 |
/* Get Protocol Version |
| 184 |
* bmRequest == UCAN_COMMAND_GET; |
| 185 |
* wValue = UCAN_COMMAND_GET_PROTOCOL_VERSION |
| 186 |
*/ |
| 187 |
struct ucan_ctl_cmd_get_protocol_version cmd_get_protocol_version; |
| 188 |
|
| 189 |
u8 fw_str[128]; |
| 190 |
} __packed; |
| 191 |
|
| 192 |
enum { |
| 193 |
UCAN_TX_COMPLETE_SUCCESS = BIT(0), |
| 194 |
}; |
| 195 |
|
| 196 |
/* Transmission Complete within ucan_message_in */ |
| 197 |
struct ucan_tx_complete_entry_t { |
| 198 |
u8 echo_index; |
| 199 |
u8 flags; |
| 200 |
} __packed __aligned(0x2); |
| 201 |
|
| 202 |
/* CAN Data message format within ucan_message_in/out */ |
| 203 |
struct ucan_can_msg { |
| 204 |
/* note DLC is computed by |
| 205 |
* msg.len - sizeof (msg.len) |
| 206 |
* - sizeof (msg.type) |
| 207 |
* - sizeof (msg.can_msg.id) |
| 208 |
*/ |
| 209 |
__le32 id; |
| 210 |
|
| 211 |
union { |
| 212 |
u8 data[CAN_MAX_DLEN]; /* Data of CAN frames */ |
| 213 |
u8 dlc; /* RTR dlc */ |
| 214 |
}; |
| 215 |
} __packed; |
| 216 |
|
| 217 |
/* OUT Endpoint, outbound messages */ |
| 218 |
struct ucan_message_out { |
| 219 |
__le16 len; /* Length of the content include header */ |
| 220 |
u8 type; /* UCAN_OUT_TX and friends */ |
| 221 |
u8 subtype; /* command sub type */ |
| 222 |
|
| 223 |
union { |
| 224 |
/* Transmit CAN frame |
| 225 |
* (type == UCAN_TX) && ((msg.can_msg.id & CAN_RTR_FLAG) == 0) |
| 226 |
* subtype stores the echo id |
| 227 |
*/ |
| 228 |
struct ucan_can_msg can_msg; |
| 229 |
} msg; |
| 230 |
} __packed __aligned(0x4); |
| 231 |
|
| 232 |
/* IN Endpoint, inbound messages */ |
| 233 |
struct ucan_message_in { |
| 234 |
__le16 len; /* Length of the content include header */ |
| 235 |
u8 type; /* UCAN_IN_RX and friends */ |
| 236 |
u8 subtype; /* command sub type */ |
| 237 |
|
| 238 |
union { |
| 239 |
/* CAN Frame received |
| 240 |
* (type == UCAN_IN_RX) |
| 241 |
* && ((msg.can_msg.id & CAN_RTR_FLAG) == 0) |
| 242 |
*/ |
| 243 |
struct ucan_can_msg can_msg; |
| 244 |
|
| 245 |
/* CAN transmission complete |
| 246 |
* (type == UCAN_IN_TX_COMPLETE) |
| 247 |
*/ |
| 248 |
DECLARE_FLEX_ARRAY(struct ucan_tx_complete_entry_t, |
| 249 |
can_tx_complete_msg); |
| 250 |
} __aligned(0x4) msg; |
| 251 |
} __packed __aligned(0x4); |
| 252 |
|
| 253 |
/* Macros to calculate message lengths */ |
| 254 |
#define UCAN_OUT_HDR_SIZE offsetof(struct ucan_message_out, msg) |
| 255 |
|
| 256 |
#define UCAN_IN_HDR_SIZE offsetof(struct ucan_message_in, msg) |
| 257 |
#define UCAN_IN_LEN(member) (UCAN_OUT_HDR_SIZE + sizeof(member)) |
| 258 |
|
| 259 |
struct ucan_priv; |
| 260 |
|
| 261 |
/* Context Information for transmission URBs */ |
| 262 |
struct ucan_urb_context { |
| 263 |
struct ucan_priv *up; |
| 264 |
bool allocated; |
| 265 |
}; |
| 266 |
|
| 267 |
/* Information reported by the USB device */ |
| 268 |
struct ucan_device_info { |
| 269 |
struct can_bittiming_const bittiming_const; |
| 270 |
u8 tx_fifo; |
| 271 |
}; |
| 272 |
|
| 273 |
/* Driver private data */ |
| 274 |
struct ucan_priv { |
| 275 |
/* must be the first member */ |
| 276 |
struct can_priv can; |
| 277 |
|
| 278 |
/* linux USB device structures */ |
| 279 |
struct usb_device *udev; |
| 280 |
struct net_device *netdev; |
| 281 |
|
| 282 |
/* lock for can->echo_skb (used around |
| 283 |
* can_put/get/free_echo_skb |
| 284 |
*/ |
| 285 |
spinlock_t echo_skb_lock; |
| 286 |
|
| 287 |
/* usb device information */ |
| 288 |
u8 intf_index; |
| 289 |
u8 in_ep_addr; |
| 290 |
u8 out_ep_addr; |
| 291 |
u16 in_ep_size; |
| 292 |
|
| 293 |
/* transmission and reception buffers */ |
| 294 |
struct usb_anchor rx_urbs; |
| 295 |
struct usb_anchor tx_urbs; |
| 296 |
|
| 297 |
union ucan_ctl_payload *ctl_msg_buffer; |
| 298 |
struct ucan_device_info device_info; |
| 299 |
|
| 300 |
/* transmission control information and locks */ |
| 301 |
spinlock_t context_lock; |
| 302 |
unsigned int available_tx_urbs; |
| 303 |
struct ucan_urb_context *context_array; |
| 304 |
}; |
| 305 |
|
| 306 |
static u8 ucan_can_cc_dlc2len(struct ucan_can_msg *msg, u16 len) |
| 307 |
{ |
| 308 |
if (le32_to_cpu(msg->id) & CAN_RTR_FLAG) |
| 309 |
return can_cc_dlc2len(msg->dlc); |
| 310 |
else |
| 311 |
return can_cc_dlc2len(len - (UCAN_IN_HDR_SIZE + sizeof(msg->id))); |
| 312 |
} |
| 313 |
|
| 314 |
static void ucan_release_context_array(struct ucan_priv *up) |
| 315 |
{ |
| 316 |
if (!up->context_array) |
| 317 |
return; |
| 318 |
|
| 319 |
/* lock is not needed because, driver is currently opening or closing */ |
| 320 |
up->available_tx_urbs = 0; |
| 321 |
|
| 322 |
kfree(up->context_array); |
| 323 |
up->context_array = NULL; |
| 324 |
} |
| 325 |
|
| 326 |
static int ucan_alloc_context_array(struct ucan_priv *up) |
| 327 |
{ |
| 328 |
int i; |
| 329 |
|
| 330 |
/* release contexts if any */ |
| 331 |
ucan_release_context_array(up); |
| 332 |
|
| 333 |
up->context_array = kzalloc_objs(*up->context_array, |
| 334 |
up->device_info.tx_fifo); |
| 335 |
if (!up->context_array) { |
| 336 |
netdev_err(up->netdev, |
| 337 |
"Not enough memory to allocate tx contexts\n"); |
| 338 |
return -ENOMEM; |
| 339 |
} |
| 340 |
|
| 341 |
for (i = 0; i < up->device_info.tx_fifo; i++) { |
| 342 |
up->context_array[i].allocated = false; |
| 343 |
up->context_array[i].up = up; |
| 344 |
} |
| 345 |
|
| 346 |
/* lock is not needed because, driver is currently opening */ |
| 347 |
up->available_tx_urbs = up->device_info.tx_fifo; |
| 348 |
|
| 349 |
return 0; |
| 350 |
} |
| 351 |
|
| 352 |
static struct ucan_urb_context *ucan_alloc_context(struct ucan_priv *up) |
| 353 |
{ |
| 354 |
int i; |
| 355 |
unsigned long flags; |
| 356 |
struct ucan_urb_context *ret = NULL; |
| 357 |
|
| 358 |
if (WARN_ON_ONCE(!up->context_array)) |
| 359 |
return NULL; |
| 360 |
|
| 361 |
/* execute context operation atomically */ |
| 362 |
spin_lock_irqsave(&up->context_lock, flags); |
| 363 |
|
| 364 |
for (i = 0; i < up->device_info.tx_fifo; i++) { |
| 365 |
if (!up->context_array[i].allocated) { |
| 366 |
/* update context */ |
| 367 |
ret = &up->context_array[i]; |
| 368 |
up->context_array[i].allocated = true; |
| 369 |
|
| 370 |
/* stop queue if necessary */ |
| 371 |
up->available_tx_urbs--; |
| 372 |
if (!up->available_tx_urbs) |
| 373 |
netif_stop_queue(up->netdev); |
| 374 |
|
| 375 |
break; |
| 376 |
} |
| 377 |
} |
| 378 |
|
| 379 |
spin_unlock_irqrestore(&up->context_lock, flags); |
| 380 |
return ret; |
| 381 |
} |
| 382 |
|
| 383 |
static bool ucan_release_context(struct ucan_priv *up, |
| 384 |
struct ucan_urb_context *ctx) |
| 385 |
{ |
| 386 |
unsigned long flags; |
| 387 |
bool ret = false; |
| 388 |
|
| 389 |
if (WARN_ON_ONCE(!up->context_array)) |
| 390 |
return false; |
| 391 |
|
| 392 |
/* execute context operation atomically */ |
| 393 |
spin_lock_irqsave(&up->context_lock, flags); |
| 394 |
|
| 395 |
/* context was not allocated, maybe the device sent garbage */ |
| 396 |
if (ctx->allocated) { |
| 397 |
ctx->allocated = false; |
| 398 |
|
| 399 |
/* check if the queue needs to be woken */ |
| 400 |
if (!up->available_tx_urbs) |
| 401 |
netif_wake_queue(up->netdev); |
| 402 |
up->available_tx_urbs++; |
| 403 |
|
| 404 |
ret = true; |
| 405 |
} |
| 406 |
|
| 407 |
spin_unlock_irqrestore(&up->context_lock, flags); |
| 408 |
return ret; |
| 409 |
} |
| 410 |
|
| 411 |
static int ucan_ctrl_command_out(struct ucan_priv *up, |
| 412 |
u8 cmd, u16 subcmd, u16 datalen) |
| 413 |
{ |
| 414 |
return usb_control_msg(up->udev, |
| 415 |
usb_sndctrlpipe(up->udev, 0), |
| 416 |
cmd, |
| 417 |
USB_DIR_OUT | USB_TYPE_VENDOR | |
| 418 |
USB_RECIP_INTERFACE, |
| 419 |
subcmd, |
| 420 |
up->intf_index, |
| 421 |
up->ctl_msg_buffer, |
| 422 |
datalen, |
| 423 |
UCAN_USB_CTL_PIPE_TIMEOUT); |
| 424 |
} |
| 425 |
|
| 426 |
static void ucan_get_fw_str(struct ucan_priv *up, char *fw_str, size_t size) |
| 427 |
{ |
| 428 |
int ret; |
| 429 |
|
| 430 |
ret = usb_control_msg(up->udev, usb_rcvctrlpipe(up->udev, 0), |
| 431 |
UCAN_DEVICE_GET_FW_STRING, |
| 432 |
USB_DIR_IN | USB_TYPE_VENDOR | |
| 433 |
USB_RECIP_DEVICE, |
| 434 |
0, 0, fw_str, size - 1, |
| 435 |
UCAN_USB_CTL_PIPE_TIMEOUT); |
| 436 |
if (ret > 0) |
| 437 |
fw_str[ret] = '\0'; |
| 438 |
else |
| 439 |
strscpy(fw_str, "unknown", size); |
| 440 |
} |
| 441 |
|
| 442 |
/* Parse the device information structure reported by the device and |
| 443 |
* setup private variables accordingly |
| 444 |
*/ |
| 445 |
static void ucan_parse_device_info(struct ucan_priv *up, |
| 446 |
struct ucan_ctl_cmd_device_info *device_info) |
| 447 |
{ |
| 448 |
struct can_bittiming_const *bittiming = |
| 449 |
&up->device_info.bittiming_const; |
| 450 |
u16 ctrlmodes; |
| 451 |
|
| 452 |
/* store the data */ |
| 453 |
up->can.clock.freq = le32_to_cpu(device_info->freq); |
| 454 |
up->device_info.tx_fifo = device_info->tx_fifo; |
| 455 |
strcpy(bittiming->name, "ucan"); |
| 456 |
bittiming->tseg1_min = device_info->tseg1_min; |
| 457 |
bittiming->tseg1_max = device_info->tseg1_max; |
| 458 |
bittiming->tseg2_min = device_info->tseg2_min; |
| 459 |
bittiming->tseg2_max = device_info->tseg2_max; |
| 460 |
bittiming->sjw_max = device_info->sjw_max; |
| 461 |
bittiming->brp_min = le32_to_cpu(device_info->brp_min); |
| 462 |
bittiming->brp_max = le32_to_cpu(device_info->brp_max); |
| 463 |
bittiming->brp_inc = le16_to_cpu(device_info->brp_inc); |
| 464 |
|
| 465 |
ctrlmodes = le16_to_cpu(device_info->ctrlmodes); |
| 466 |
|
| 467 |
up->can.ctrlmode_supported = 0; |
| 468 |
|
| 469 |
if (ctrlmodes & UCAN_MODE_LOOPBACK) |
| 470 |
up->can.ctrlmode_supported |= CAN_CTRLMODE_LOOPBACK; |
| 471 |
if (ctrlmodes & UCAN_MODE_SILENT) |
| 472 |
up->can.ctrlmode_supported |= CAN_CTRLMODE_LISTENONLY; |
| 473 |
if (ctrlmodes & UCAN_MODE_3_SAMPLES) |
| 474 |
up->can.ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES; |
| 475 |
if (ctrlmodes & UCAN_MODE_ONE_SHOT) |
| 476 |
up->can.ctrlmode_supported |= CAN_CTRLMODE_ONE_SHOT; |
| 477 |
if (ctrlmodes & UCAN_MODE_BERR_REPORT) |
| 478 |
up->can.ctrlmode_supported |= CAN_CTRLMODE_BERR_REPORTING; |
| 479 |
} |
| 480 |
|
| 481 |
/* Handle a CAN error frame that we have received from the device. |
| 482 |
* Returns true if the can state has changed. |
| 483 |
*/ |
| 484 |
static bool ucan_handle_error_frame(struct ucan_priv *up, |
| 485 |
struct ucan_message_in *m, |
| 486 |
canid_t canid) |
| 487 |
{ |
| 488 |
enum can_state new_state = up->can.state; |
| 489 |
struct net_device_stats *net_stats = &up->netdev->stats; |
| 490 |
struct can_device_stats *can_stats = &up->can.can_stats; |
| 491 |
|
| 492 |
if (canid & CAN_ERR_LOSTARB) |
| 493 |
can_stats->arbitration_lost++; |
| 494 |
|
| 495 |
if (canid & CAN_ERR_BUSERROR) |
| 496 |
can_stats->bus_error++; |
| 497 |
|
| 498 |
if (canid & CAN_ERR_ACK) |
| 499 |
net_stats->tx_errors++; |
| 500 |
|
| 501 |
if (canid & CAN_ERR_BUSOFF) |
| 502 |
new_state = CAN_STATE_BUS_OFF; |
| 503 |
|
| 504 |
/* controller problems, details in data[1] */ |
| 505 |
if (canid & CAN_ERR_CRTL) { |
| 506 |
u8 d1 = m->msg.can_msg.data[1]; |
| 507 |
|
| 508 |
if (d1 & CAN_ERR_CRTL_RX_OVERFLOW) |
| 509 |
net_stats->rx_over_errors++; |
| 510 |
|
| 511 |
/* controller state bits: if multiple are set the worst wins */ |
| 512 |
if (d1 & CAN_ERR_CRTL_ACTIVE) |
| 513 |
new_state = CAN_STATE_ERROR_ACTIVE; |
| 514 |
|
| 515 |
if (d1 & (CAN_ERR_CRTL_RX_WARNING | CAN_ERR_CRTL_TX_WARNING)) |
| 516 |
new_state = CAN_STATE_ERROR_WARNING; |
| 517 |
|
| 518 |
if (d1 & (CAN_ERR_CRTL_RX_PASSIVE | CAN_ERR_CRTL_TX_PASSIVE)) |
| 519 |
new_state = CAN_STATE_ERROR_PASSIVE; |
| 520 |
} |
| 521 |
|
| 522 |
/* protocol error, details in data[2] */ |
| 523 |
if (canid & CAN_ERR_PROT) { |
| 524 |
u8 d2 = m->msg.can_msg.data[2]; |
| 525 |
|
| 526 |
if (d2 & CAN_ERR_PROT_TX) |
| 527 |
net_stats->tx_errors++; |
| 528 |
else |
| 529 |
net_stats->rx_errors++; |
| 530 |
} |
| 531 |
|
| 532 |
/* no state change - we are done */ |
| 533 |
if (up->can.state == new_state) |
| 534 |
return false; |
| 535 |
|
| 536 |
/* we switched into a better state */ |
| 537 |
if (up->can.state > new_state) { |
| 538 |
up->can.state = new_state; |
| 539 |
return true; |
| 540 |
} |
| 541 |
|
| 542 |
/* we switched into a worse state */ |
| 543 |
up->can.state = new_state; |
| 544 |
switch (new_state) { |
| 545 |
case CAN_STATE_BUS_OFF: |
| 546 |
can_stats->bus_off++; |
| 547 |
can_bus_off(up->netdev); |
| 548 |
break; |
| 549 |
case CAN_STATE_ERROR_PASSIVE: |
| 550 |
can_stats->error_passive++; |
| 551 |
break; |
| 552 |
case CAN_STATE_ERROR_WARNING: |
| 553 |
can_stats->error_warning++; |
| 554 |
break; |
| 555 |
default: |
| 556 |
break; |
| 557 |
} |
| 558 |
return true; |
| 559 |
} |
| 560 |
|
| 561 |
/* Callback on reception of a can frame via the IN endpoint |
| 562 |
* |
| 563 |
* This function allocates an skb and transferres it to the Linux |
| 564 |
* network stack |
| 565 |
*/ |
| 566 |
static void ucan_rx_can_msg(struct ucan_priv *up, struct ucan_message_in *m) |
| 567 |
{ |
| 568 |
int len; |
| 569 |
canid_t canid; |
| 570 |
struct can_frame *cf; |
| 571 |
struct sk_buff *skb; |
| 572 |
struct net_device_stats *stats = &up->netdev->stats; |
| 573 |
|
| 574 |
/* get the contents of the length field */ |
| 575 |
len = le16_to_cpu(m->len); |
| 576 |
|
| 577 |
/* check sanity */ |
| 578 |
if (len < UCAN_IN_HDR_SIZE + sizeof(m->msg.can_msg.id)) { |
| 579 |
netdev_warn(up->netdev, "invalid input message len: %d\n", len); |
| 580 |
return; |
| 581 |
} |
| 582 |
|
| 583 |
/* handle error frames */ |
| 584 |
canid = le32_to_cpu(m->msg.can_msg.id); |
| 585 |
if (canid & CAN_ERR_FLAG) { |
| 586 |
bool busstate_changed = ucan_handle_error_frame(up, m, canid); |
| 587 |
|
| 588 |
/* if berr-reporting is off only state changes get through */ |
| 589 |
if (!(up->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING) && |
| 590 |
!busstate_changed) |
| 591 |
return; |
| 592 |
} else { |
| 593 |
canid_t canid_mask; |
| 594 |
/* compute the mask for canid */ |
| 595 |
canid_mask = CAN_RTR_FLAG; |
| 596 |
if (canid & CAN_EFF_FLAG) |
| 597 |
canid_mask |= CAN_EFF_MASK | CAN_EFF_FLAG; |
| 598 |
else |
| 599 |
canid_mask |= CAN_SFF_MASK; |
| 600 |
|
| 601 |
if (canid & ~canid_mask) |
| 602 |
netdev_warn(up->netdev, |
| 603 |
"unexpected bits set (canid %x, mask %x)", |
| 604 |
canid, canid_mask); |
| 605 |
|
| 606 |
canid &= canid_mask; |
| 607 |
} |
| 608 |
|
| 609 |
/* allocate skb */ |
| 610 |
skb = alloc_can_skb(up->netdev, &cf); |
| 611 |
if (!skb) |
| 612 |
return; |
| 613 |
|
| 614 |
/* fill the can frame */ |
| 615 |
cf->can_id = canid; |
| 616 |
|
| 617 |
/* compute DLC taking RTR_FLAG into account */ |
| 618 |
cf->len = ucan_can_cc_dlc2len(&m->msg.can_msg, len); |
| 619 |
|
| 620 |
/* copy the payload of non RTR frames */ |
| 621 |
if (!(cf->can_id & CAN_RTR_FLAG) || (cf->can_id & CAN_ERR_FLAG)) |
| 622 |
memcpy(cf->data, m->msg.can_msg.data, cf->len); |
| 623 |
|
| 624 |
/* don't count error frames as real packets */ |
| 625 |
if (!(cf->can_id & CAN_ERR_FLAG)) { |
| 626 |
stats->rx_packets++; |
| 627 |
if (!(cf->can_id & CAN_RTR_FLAG)) |
| 628 |
stats->rx_bytes += cf->len; |
| 629 |
} |
| 630 |
|
| 631 |
/* pass it to Linux */ |
| 632 |
netif_rx(skb); |
| 633 |
} |
| 634 |
|
| 635 |
/* callback indicating completed transmission */ |
| 636 |
static void ucan_tx_complete_msg(struct ucan_priv *up, |
| 637 |
struct ucan_message_in *m) |
| 638 |
{ |
| 639 |
unsigned long flags; |
| 640 |
u16 count, i; |
| 641 |
u8 echo_index; |
| 642 |
u16 len = le16_to_cpu(m->len); |
| 643 |
|
| 644 |
struct ucan_urb_context *context; |
| 645 |
|
| 646 |
if (len < UCAN_IN_HDR_SIZE || (len % 2 != 0)) { |
| 647 |
netdev_err(up->netdev, "invalid tx complete length\n"); |
| 648 |
return; |
| 649 |
} |
| 650 |
|
| 651 |
count = (len - UCAN_IN_HDR_SIZE) / 2; |
| 652 |
for (i = 0; i < count; i++) { |
| 653 |
/* we did not submit such echo ids */ |
| 654 |
echo_index = m->msg.can_tx_complete_msg[i].echo_index; |
| 655 |
if (echo_index >= up->device_info.tx_fifo) { |
| 656 |
up->netdev->stats.tx_errors++; |
| 657 |
netdev_err(up->netdev, |
| 658 |
"invalid echo_index %d received\n", |
| 659 |
echo_index); |
| 660 |
continue; |
| 661 |
} |
| 662 |
|
| 663 |
/* gather information from the context */ |
| 664 |
context = &up->context_array[echo_index]; |
| 665 |
|
| 666 |
/* Release context and restart queue if necessary. |
| 667 |
* Also check if the context was allocated |
| 668 |
*/ |
| 669 |
if (!ucan_release_context(up, context)) |
| 670 |
continue; |
| 671 |
|
| 672 |
spin_lock_irqsave(&up->echo_skb_lock, flags); |
| 673 |
if (m->msg.can_tx_complete_msg[i].flags & |
| 674 |
UCAN_TX_COMPLETE_SUCCESS) { |
| 675 |
/* update statistics */ |
| 676 |
up->netdev->stats.tx_packets++; |
| 677 |
up->netdev->stats.tx_bytes += |
| 678 |
can_get_echo_skb(up->netdev, echo_index, NULL); |
| 679 |
} else { |
| 680 |
up->netdev->stats.tx_dropped++; |
| 681 |
can_free_echo_skb(up->netdev, echo_index, NULL); |
| 682 |
} |
| 683 |
spin_unlock_irqrestore(&up->echo_skb_lock, flags); |
| 684 |
} |
| 685 |
} |
| 686 |
|
| 687 |
/* callback on reception of a USB message */ |
| 688 |
static void ucan_read_bulk_callback(struct urb *urb) |
| 689 |
{ |
| 690 |
int ret; |
| 691 |
int pos; |
| 692 |
struct ucan_priv *up = urb->context; |
| 693 |
struct net_device *netdev = up->netdev; |
| 694 |
struct ucan_message_in *m; |
| 695 |
|
| 696 |
/* the device is not up and the driver should not receive any |
| 697 |
* data on the bulk in pipe |
| 698 |
*/ |
| 699 |
if (WARN_ON(!up->context_array)) { |
| 700 |
usb_free_coherent(up->udev, |
| 701 |
up->in_ep_size, |
| 702 |
urb->transfer_buffer, |
| 703 |
urb->transfer_dma); |
| 704 |
return; |
| 705 |
} |
| 706 |
|
| 707 |
/* check URB status */ |
| 708 |
switch (urb->status) { |
| 709 |
case 0: |
| 710 |
break; |
| 711 |
case -ENOENT: |
| 712 |
case -EPIPE: |
| 713 |
case -EPROTO: |
| 714 |
case -ESHUTDOWN: |
| 715 |
case -ETIME: |
| 716 |
/* urb is not resubmitted -> free dma data */ |
| 717 |
usb_free_coherent(up->udev, |
| 718 |
up->in_ep_size, |
| 719 |
urb->transfer_buffer, |
| 720 |
urb->transfer_dma); |
| 721 |
netdev_dbg(up->netdev, "not resubmitting urb; status: %d\n", |
| 722 |
urb->status); |
| 723 |
return; |
| 724 |
default: |
| 725 |
goto resubmit; |
| 726 |
} |
| 727 |
|
| 728 |
/* sanity check */ |
| 729 |
if (!netif_device_present(netdev)) |
| 730 |
return; |
| 731 |
|
| 732 |
/* iterate over input */ |
| 733 |
pos = 0; |
| 734 |
while (pos < urb->actual_length) { |
| 735 |
int len; |
| 736 |
|
| 737 |
/* check sanity (length of header) */ |
| 738 |
if ((urb->actual_length - pos) < UCAN_IN_HDR_SIZE) { |
| 739 |
netdev_warn(up->netdev, |
| 740 |
"invalid message (short; no hdr; l:%d)\n", |
| 741 |
urb->actual_length); |
| 742 |
goto resubmit; |
| 743 |
} |
| 744 |
|
| 745 |
/* setup the message address */ |
| 746 |
m = (struct ucan_message_in *) |
| 747 |
((u8 *)urb->transfer_buffer + pos); |
| 748 |
len = le16_to_cpu(m->len); |
| 749 |
|
| 750 |
/* check sanity (length of content) */ |
| 751 |
if ((len == 0) || (urb->actual_length - pos < len)) { |
| 752 |
netdev_warn(up->netdev, |
| 753 |
"invalid message (short; no data; l:%d)\n", |
| 754 |
urb->actual_length); |
| 755 |
print_hex_dump(KERN_WARNING, |
| 756 |
"raw data: ", |
| 757 |
DUMP_PREFIX_ADDRESS, |
| 758 |
16, |
| 759 |
1, |
| 760 |
urb->transfer_buffer, |
| 761 |
urb->actual_length, |
| 762 |
true); |
| 763 |
|
| 764 |
goto resubmit; |
| 765 |
} |
| 766 |
|
| 767 |
switch (m->type) { |
| 768 |
case UCAN_IN_RX: |
| 769 |
ucan_rx_can_msg(up, m); |
| 770 |
break; |
| 771 |
case UCAN_IN_TX_COMPLETE: |
| 772 |
ucan_tx_complete_msg(up, m); |
| 773 |
break; |
| 774 |
default: |
| 775 |
netdev_warn(up->netdev, |
| 776 |
"invalid message (type; t:%d)\n", |
| 777 |
m->type); |
| 778 |
break; |
| 779 |
} |
| 780 |
|
| 781 |
/* proceed to next message */ |
| 782 |
pos += len; |
| 783 |
/* align to 4 byte boundary */ |
| 784 |
pos = round_up(pos, 4); |
| 785 |
} |
| 786 |
|
| 787 |
resubmit: |
| 788 |
/* resubmit urb when done */ |
| 789 |
usb_fill_bulk_urb(urb, up->udev, |
| 790 |
usb_rcvbulkpipe(up->udev, |
| 791 |
up->in_ep_addr), |
| 792 |
urb->transfer_buffer, |
| 793 |
up->in_ep_size, |
| 794 |
ucan_read_bulk_callback, |
| 795 |
up); |
| 796 |
|
| 797 |
usb_anchor_urb(urb, &up->rx_urbs); |
| 798 |
ret = usb_submit_urb(urb, GFP_ATOMIC); |
| 799 |
|
| 800 |
if (ret < 0) { |
| 801 |
netdev_err(up->netdev, |
| 802 |
"failed resubmitting read bulk urb: %d\n", |
| 803 |
ret); |
| 804 |
|
| 805 |
usb_unanchor_urb(urb); |
| 806 |
usb_free_coherent(up->udev, |
| 807 |
up->in_ep_size, |
| 808 |
urb->transfer_buffer, |
| 809 |
urb->transfer_dma); |
| 810 |
|
| 811 |
if (ret == -ENODEV) |
| 812 |
netif_device_detach(netdev); |
| 813 |
} |
| 814 |
} |
| 815 |
|
| 816 |
/* callback after transmission of a USB message */ |
| 817 |
static void ucan_write_bulk_callback(struct urb *urb) |
| 818 |
{ |
| 819 |
unsigned long flags; |
| 820 |
struct ucan_priv *up; |
| 821 |
struct ucan_urb_context *context = urb->context; |
| 822 |
|
| 823 |
/* get the urb context */ |
| 824 |
if (WARN_ON_ONCE(!context)) |
| 825 |
return; |
| 826 |
|
| 827 |
/* free up our allocated buffer */ |
| 828 |
usb_free_coherent(urb->dev, |
| 829 |
sizeof(struct ucan_message_out), |
| 830 |
urb->transfer_buffer, |
| 831 |
urb->transfer_dma); |
| 832 |
|
| 833 |
up = context->up; |
| 834 |
if (WARN_ON_ONCE(!up)) |
| 835 |
return; |
| 836 |
|
| 837 |
/* sanity check */ |
| 838 |
if (!netif_device_present(up->netdev)) |
| 839 |
return; |
| 840 |
|
| 841 |
/* transmission failed (USB - the device will not send a TX complete) */ |
| 842 |
if (urb->status) { |
| 843 |
netdev_warn(up->netdev, |
| 844 |
"failed to transmit USB message to device: %d\n", |
| 845 |
urb->status); |
| 846 |
|
| 847 |
/* update counters an cleanup */ |
| 848 |
spin_lock_irqsave(&up->echo_skb_lock, flags); |
| 849 |
can_free_echo_skb(up->netdev, context - up->context_array, NULL); |
| 850 |
spin_unlock_irqrestore(&up->echo_skb_lock, flags); |
| 851 |
|
| 852 |
up->netdev->stats.tx_dropped++; |
| 853 |
|
| 854 |
/* release context and restart the queue if necessary */ |
| 855 |
if (!ucan_release_context(up, context)) |
| 856 |
netdev_err(up->netdev, |
| 857 |
"urb failed, failed to release context\n"); |
| 858 |
} |
| 859 |
} |
| 860 |
|
| 861 |
static void ucan_cleanup_rx_urbs(struct ucan_priv *up, struct urb **urbs) |
| 862 |
{ |
| 863 |
int i; |
| 864 |
|
| 865 |
for (i = 0; i < UCAN_MAX_RX_URBS; i++) { |
| 866 |
if (urbs[i]) { |
| 867 |
usb_unanchor_urb(urbs[i]); |
| 868 |
usb_free_coherent(up->udev, |
| 869 |
up->in_ep_size, |
| 870 |
urbs[i]->transfer_buffer, |
| 871 |
urbs[i]->transfer_dma); |
| 872 |
usb_free_urb(urbs[i]); |
| 873 |
} |
| 874 |
} |
| 875 |
|
| 876 |
memset(urbs, 0, sizeof(*urbs) * UCAN_MAX_RX_URBS); |
| 877 |
} |
| 878 |
|
| 879 |
static int ucan_prepare_and_anchor_rx_urbs(struct ucan_priv *up, |
| 880 |
struct urb **urbs) |
| 881 |
{ |
| 882 |
int i; |
| 883 |
|
| 884 |
memset(urbs, 0, sizeof(*urbs) * UCAN_MAX_RX_URBS); |
| 885 |
|
| 886 |
for (i = 0; i < UCAN_MAX_RX_URBS; i++) { |
| 887 |
void *buf; |
| 888 |
|
| 889 |
urbs[i] = usb_alloc_urb(0, GFP_KERNEL); |
| 890 |
if (!urbs[i]) |
| 891 |
goto err; |
| 892 |
|
| 893 |
buf = usb_alloc_coherent(up->udev, |
| 894 |
up->in_ep_size, |
| 895 |
GFP_KERNEL, &urbs[i]->transfer_dma); |
| 896 |
if (!buf) { |
| 897 |
/* cleanup this urb */ |
| 898 |
usb_free_urb(urbs[i]); |
| 899 |
urbs[i] = NULL; |
| 900 |
goto err; |
| 901 |
} |
| 902 |
|
| 903 |
usb_fill_bulk_urb(urbs[i], up->udev, |
| 904 |
usb_rcvbulkpipe(up->udev, |
| 905 |
up->in_ep_addr), |
| 906 |
buf, |
| 907 |
up->in_ep_size, |
| 908 |
ucan_read_bulk_callback, |
| 909 |
up); |
| 910 |
|
| 911 |
urbs[i]->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; |
| 912 |
|
| 913 |
usb_anchor_urb(urbs[i], &up->rx_urbs); |
| 914 |
} |
| 915 |
return 0; |
| 916 |
|
| 917 |
err: |
| 918 |
/* cleanup other unsubmitted urbs */ |
| 919 |
ucan_cleanup_rx_urbs(up, urbs); |
| 920 |
return -ENOMEM; |
| 921 |
} |
| 922 |
|
| 923 |
/* Submits rx urbs with the semantic: Either submit all, or cleanup |
| 924 |
* everything. I case of errors submitted urbs are killed and all urbs in |
| 925 |
* the array are freed. I case of no errors every entry in the urb |
| 926 |
* array is set to NULL. |
| 927 |
*/ |
| 928 |
static int ucan_submit_rx_urbs(struct ucan_priv *up, struct urb **urbs) |
| 929 |
{ |
| 930 |
int i, ret; |
| 931 |
|
| 932 |
/* Iterate over all urbs to submit. On success remove the urb |
| 933 |
* from the list. |
| 934 |
*/ |
| 935 |
for (i = 0; i < UCAN_MAX_RX_URBS; i++) { |
| 936 |
ret = usb_submit_urb(urbs[i], GFP_KERNEL); |
| 937 |
if (ret) { |
| 938 |
netdev_err(up->netdev, |
| 939 |
"could not submit urb; code: %d\n", |
| 940 |
ret); |
| 941 |
goto err; |
| 942 |
} |
| 943 |
|
| 944 |
/* Anchor URB and drop reference, USB core will take |
| 945 |
* care of freeing it |
| 946 |
*/ |
| 947 |
usb_free_urb(urbs[i]); |
| 948 |
urbs[i] = NULL; |
| 949 |
} |
| 950 |
return 0; |
| 951 |
|
| 952 |
err: |
| 953 |
/* Cleanup unsubmitted urbs */ |
| 954 |
ucan_cleanup_rx_urbs(up, urbs); |
| 955 |
|
| 956 |
/* Kill urbs that are already submitted */ |
| 957 |
usb_kill_anchored_urbs(&up->rx_urbs); |
| 958 |
|
| 959 |
return ret; |
| 960 |
} |
| 961 |
|
| 962 |
/* Open the network device */ |
| 963 |
static int ucan_open(struct net_device *netdev) |
| 964 |
{ |
| 965 |
int ret, ret_cleanup; |
| 966 |
u16 ctrlmode; |
| 967 |
struct urb *urbs[UCAN_MAX_RX_URBS]; |
| 968 |
struct ucan_priv *up = netdev_priv(netdev); |
| 969 |
|
| 970 |
ret = ucan_alloc_context_array(up); |
| 971 |
if (ret) |
| 972 |
return ret; |
| 973 |
|
| 974 |
/* Allocate and prepare IN URBS - allocated and anchored |
| 975 |
* urbs are stored in urbs[] for clean |
| 976 |
*/ |
| 977 |
ret = ucan_prepare_and_anchor_rx_urbs(up, urbs); |
| 978 |
if (ret) |
| 979 |
goto err_contexts; |
| 980 |
|
| 981 |
/* Check the control mode */ |
| 982 |
ctrlmode = 0; |
| 983 |
if (up->can.ctrlmode & CAN_CTRLMODE_LOOPBACK) |
| 984 |
ctrlmode |= UCAN_MODE_LOOPBACK; |
| 985 |
if (up->can.ctrlmode & CAN_CTRLMODE_LISTENONLY) |
| 986 |
ctrlmode |= UCAN_MODE_SILENT; |
| 987 |
if (up->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES) |
| 988 |
ctrlmode |= UCAN_MODE_3_SAMPLES; |
| 989 |
if (up->can.ctrlmode & CAN_CTRLMODE_ONE_SHOT) |
| 990 |
ctrlmode |= UCAN_MODE_ONE_SHOT; |
| 991 |
|
| 992 |
/* Enable this in any case - filtering is down within the |
| 993 |
* receive path |
| 994 |
*/ |
| 995 |
ctrlmode |= UCAN_MODE_BERR_REPORT; |
| 996 |
up->ctl_msg_buffer->cmd_start.mode = cpu_to_le16(ctrlmode); |
| 997 |
|
| 998 |
/* Driver is ready to receive data - start the USB device */ |
| 999 |
ret = ucan_ctrl_command_out(up, UCAN_COMMAND_START, 0, 2); |
| 1000 |
if (ret < 0) { |
| 1001 |
netdev_err(up->netdev, |
| 1002 |
"could not start device, code: %d\n", |
| 1003 |
ret); |
| 1004 |
goto err_reset; |
| 1005 |
} |
| 1006 |
|
| 1007 |
/* Call CAN layer open */ |
| 1008 |
ret = open_candev(netdev); |
| 1009 |
if (ret) |
| 1010 |
goto err_stop; |
| 1011 |
|
| 1012 |
/* Driver is ready to receive data. Submit RX URBS */ |
| 1013 |
ret = ucan_submit_rx_urbs(up, urbs); |
| 1014 |
if (ret) |
| 1015 |
goto err_stop; |
| 1016 |
|
| 1017 |
up->can.state = CAN_STATE_ERROR_ACTIVE; |
| 1018 |
|
| 1019 |
/* Start the network queue */ |
| 1020 |
netif_start_queue(netdev); |
| 1021 |
|
| 1022 |
return 0; |
| 1023 |
|
| 1024 |
err_stop: |
| 1025 |
/* The device have started already stop it */ |
| 1026 |
ret_cleanup = ucan_ctrl_command_out(up, UCAN_COMMAND_STOP, 0, 0); |
| 1027 |
if (ret_cleanup < 0) |
| 1028 |
netdev_err(up->netdev, |
| 1029 |
"could not stop device, code: %d\n", |
| 1030 |
ret_cleanup); |
| 1031 |
|
| 1032 |
err_reset: |
| 1033 |
/* The device might have received data, reset it for |
| 1034 |
* consistent state |
| 1035 |
*/ |
| 1036 |
ret_cleanup = ucan_ctrl_command_out(up, UCAN_COMMAND_RESET, 0, 0); |
| 1037 |
if (ret_cleanup < 0) |
| 1038 |
netdev_err(up->netdev, |
| 1039 |
"could not reset device, code: %d\n", |
| 1040 |
ret_cleanup); |
| 1041 |
|
| 1042 |
/* clean up unsubmitted urbs */ |
| 1043 |
ucan_cleanup_rx_urbs(up, urbs); |
| 1044 |
|
| 1045 |
err_contexts: |
| 1046 |
ucan_release_context_array(up); |
| 1047 |
return ret; |
| 1048 |
} |
| 1049 |
|
| 1050 |
static struct urb *ucan_prepare_tx_urb(struct ucan_priv *up, |
| 1051 |
struct ucan_urb_context *context, |
| 1052 |
struct can_frame *cf, |
| 1053 |
u8 echo_index) |
| 1054 |
{ |
| 1055 |
int mlen; |
| 1056 |
struct urb *urb; |
| 1057 |
struct ucan_message_out *m; |
| 1058 |
|
| 1059 |
/* create a URB, and a buffer for it, and copy the data to the URB */ |
| 1060 |
urb = usb_alloc_urb(0, GFP_ATOMIC); |
| 1061 |
if (!urb) { |
| 1062 |
netdev_err(up->netdev, "no memory left for URBs\n"); |
| 1063 |
return NULL; |
| 1064 |
} |
| 1065 |
|
| 1066 |
m = usb_alloc_coherent(up->udev, |
| 1067 |
sizeof(struct ucan_message_out), |
| 1068 |
GFP_ATOMIC, |
| 1069 |
&urb->transfer_dma); |
| 1070 |
if (!m) { |
| 1071 |
netdev_err(up->netdev, "no memory left for USB buffer\n"); |
| 1072 |
usb_free_urb(urb); |
| 1073 |
return NULL; |
| 1074 |
} |
| 1075 |
|
| 1076 |
/* build the USB message */ |
| 1077 |
m->type = UCAN_OUT_TX; |
| 1078 |
m->msg.can_msg.id = cpu_to_le32(cf->can_id); |
| 1079 |
|
| 1080 |
if (cf->can_id & CAN_RTR_FLAG) { |
| 1081 |
mlen = UCAN_OUT_HDR_SIZE + |
| 1082 |
offsetof(struct ucan_can_msg, dlc) + |
| 1083 |
sizeof(m->msg.can_msg.dlc); |
| 1084 |
m->msg.can_msg.dlc = cf->len; |
| 1085 |
} else { |
| 1086 |
mlen = UCAN_OUT_HDR_SIZE + |
| 1087 |
sizeof(m->msg.can_msg.id) + cf->len; |
| 1088 |
memcpy(m->msg.can_msg.data, cf->data, cf->len); |
| 1089 |
} |
| 1090 |
m->len = cpu_to_le16(mlen); |
| 1091 |
|
| 1092 |
m->subtype = echo_index; |
| 1093 |
|
| 1094 |
/* build the urb */ |
| 1095 |
usb_fill_bulk_urb(urb, up->udev, |
| 1096 |
usb_sndbulkpipe(up->udev, |
| 1097 |
up->out_ep_addr), |
| 1098 |
m, mlen, ucan_write_bulk_callback, context); |
| 1099 |
urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; |
| 1100 |
|
| 1101 |
return urb; |
| 1102 |
} |
| 1103 |
|
| 1104 |
static void ucan_clean_up_tx_urb(struct ucan_priv *up, struct urb *urb) |
| 1105 |
{ |
| 1106 |
usb_free_coherent(up->udev, sizeof(struct ucan_message_out), |
| 1107 |
urb->transfer_buffer, urb->transfer_dma); |
| 1108 |
usb_free_urb(urb); |
| 1109 |
} |
| 1110 |
|
| 1111 |
/* callback when Linux needs to send a can frame */ |
| 1112 |
static netdev_tx_t ucan_start_xmit(struct sk_buff *skb, |
| 1113 |
struct net_device *netdev) |
| 1114 |
{ |
| 1115 |
unsigned long flags; |
| 1116 |
int ret; |
| 1117 |
u8 echo_index; |
| 1118 |
struct urb *urb; |
| 1119 |
struct ucan_urb_context *context; |
| 1120 |
struct ucan_priv *up = netdev_priv(netdev); |
| 1121 |
struct can_frame *cf = (struct can_frame *)skb->data; |
| 1122 |
|
| 1123 |
/* check skb */ |
| 1124 |
if (can_dev_dropped_skb(netdev, skb)) |
| 1125 |
return NETDEV_TX_OK; |
| 1126 |
|
| 1127 |
/* allocate a context and slow down tx path, if fifo state is low */ |
| 1128 |
context = ucan_alloc_context(up); |
| 1129 |
echo_index = context - up->context_array; |
| 1130 |
|
| 1131 |
if (WARN_ON_ONCE(!context)) |
| 1132 |
return NETDEV_TX_BUSY; |
| 1133 |
|
| 1134 |
/* prepare urb for transmission */ |
| 1135 |
urb = ucan_prepare_tx_urb(up, context, cf, echo_index); |
| 1136 |
if (!urb) |
| 1137 |
goto drop; |
| 1138 |
|
| 1139 |
/* put the skb on can loopback stack */ |
| 1140 |
spin_lock_irqsave(&up->echo_skb_lock, flags); |
| 1141 |
can_put_echo_skb(skb, up->netdev, echo_index, 0); |
| 1142 |
spin_unlock_irqrestore(&up->echo_skb_lock, flags); |
| 1143 |
|
| 1144 |
/* transmit it */ |
| 1145 |
usb_anchor_urb(urb, &up->tx_urbs); |
| 1146 |
ret = usb_submit_urb(urb, GFP_ATOMIC); |
| 1147 |
|
| 1148 |
/* cleanup urb */ |
| 1149 |
if (ret) { |
| 1150 |
/* on error, clean up */ |
| 1151 |
usb_unanchor_urb(urb); |
| 1152 |
ucan_clean_up_tx_urb(up, urb); |
| 1153 |
if (!ucan_release_context(up, context)) |
| 1154 |
netdev_err(up->netdev, |
| 1155 |
"xmit err: failed to release context\n"); |
| 1156 |
|
| 1157 |
/* remove the skb from the echo stack - this also |
| 1158 |
* frees the skb |
| 1159 |
*/ |
| 1160 |
spin_lock_irqsave(&up->echo_skb_lock, flags); |
| 1161 |
can_free_echo_skb(up->netdev, echo_index, NULL); |
| 1162 |
spin_unlock_irqrestore(&up->echo_skb_lock, flags); |
| 1163 |
|
| 1164 |
if (ret == -ENODEV) { |
| 1165 |
netif_device_detach(up->netdev); |
| 1166 |
} else { |
| 1167 |
netdev_warn(up->netdev, |
| 1168 |
"xmit err: failed to submit urb %d\n", |
| 1169 |
ret); |
| 1170 |
up->netdev->stats.tx_dropped++; |
| 1171 |
} |
| 1172 |
return NETDEV_TX_OK; |
| 1173 |
} |
| 1174 |
|
| 1175 |
netif_trans_update(netdev); |
| 1176 |
|
| 1177 |
/* release ref, as we do not need the urb anymore */ |
| 1178 |
usb_free_urb(urb); |
| 1179 |
|
| 1180 |
return NETDEV_TX_OK; |
| 1181 |
|
| 1182 |
drop: |
| 1183 |
if (!ucan_release_context(up, context)) |
| 1184 |
netdev_err(up->netdev, |
| 1185 |
"xmit drop: failed to release context\n"); |
| 1186 |
dev_kfree_skb(skb); |
| 1187 |
up->netdev->stats.tx_dropped++; |
| 1188 |
|
| 1189 |
return NETDEV_TX_OK; |
| 1190 |
} |
| 1191 |
|
| 1192 |
/* Device goes down |
| 1193 |
* |
| 1194 |
* Clean up used resources |
| 1195 |
*/ |
| 1196 |
static int ucan_close(struct net_device *netdev) |
| 1197 |
{ |
| 1198 |
int ret; |
| 1199 |
struct ucan_priv *up = netdev_priv(netdev); |
| 1200 |
|
| 1201 |
up->can.state = CAN_STATE_STOPPED; |
| 1202 |
|
| 1203 |
/* stop sending data */ |
| 1204 |
usb_kill_anchored_urbs(&up->tx_urbs); |
| 1205 |
|
| 1206 |
/* stop receiving data */ |
| 1207 |
usb_kill_anchored_urbs(&up->rx_urbs); |
| 1208 |
|
| 1209 |
/* stop and reset can device */ |
| 1210 |
ret = ucan_ctrl_command_out(up, UCAN_COMMAND_STOP, 0, 0); |
| 1211 |
if (ret < 0) |
| 1212 |
netdev_err(up->netdev, |
| 1213 |
"could not stop device, code: %d\n", |
| 1214 |
ret); |
| 1215 |
|
| 1216 |
ret = ucan_ctrl_command_out(up, UCAN_COMMAND_RESET, 0, 0); |
| 1217 |
if (ret < 0) |
| 1218 |
netdev_err(up->netdev, |
| 1219 |
"could not reset device, code: %d\n", |
| 1220 |
ret); |
| 1221 |
|
| 1222 |
netif_stop_queue(netdev); |
| 1223 |
|
| 1224 |
ucan_release_context_array(up); |
| 1225 |
|
| 1226 |
close_candev(up->netdev); |
| 1227 |
return 0; |
| 1228 |
} |
| 1229 |
|
| 1230 |
/* CAN driver callbacks */ |
| 1231 |
static const struct net_device_ops ucan_netdev_ops = { |
| 1232 |
.ndo_open = ucan_open, |
| 1233 |
.ndo_stop = ucan_close, |
| 1234 |
.ndo_start_xmit = ucan_start_xmit, |
| 1235 |
}; |
| 1236 |
|
| 1237 |
static const struct ethtool_ops ucan_ethtool_ops = { |
| 1238 |
.get_ts_info = ethtool_op_get_ts_info, |
| 1239 |
}; |
| 1240 |
|
| 1241 |
/* Request to set bittiming |
| 1242 |
* |
| 1243 |
* This function generates an USB set bittiming message and transmits |
| 1244 |
* it to the device |
| 1245 |
*/ |
| 1246 |
static int ucan_set_bittiming(struct net_device *netdev) |
| 1247 |
{ |
| 1248 |
int ret; |
| 1249 |
struct ucan_priv *up = netdev_priv(netdev); |
| 1250 |
struct ucan_ctl_cmd_set_bittiming *cmd_set_bittiming; |
| 1251 |
|
| 1252 |
cmd_set_bittiming = &up->ctl_msg_buffer->cmd_set_bittiming; |
| 1253 |
cmd_set_bittiming->tq = cpu_to_le32(up->can.bittiming.tq); |
| 1254 |
cmd_set_bittiming->brp = cpu_to_le16(up->can.bittiming.brp); |
| 1255 |
cmd_set_bittiming->sample_point = |
| 1256 |
cpu_to_le16(up->can.bittiming.sample_point); |
| 1257 |
cmd_set_bittiming->prop_seg = up->can.bittiming.prop_seg; |
| 1258 |
cmd_set_bittiming->phase_seg1 = up->can.bittiming.phase_seg1; |
| 1259 |
cmd_set_bittiming->phase_seg2 = up->can.bittiming.phase_seg2; |
| 1260 |
cmd_set_bittiming->sjw = up->can.bittiming.sjw; |
| 1261 |
|
| 1262 |
ret = ucan_ctrl_command_out(up, UCAN_COMMAND_SET_BITTIMING, 0, |
| 1263 |
sizeof(*cmd_set_bittiming)); |
| 1264 |
return (ret < 0) ? ret : 0; |
| 1265 |
} |
| 1266 |
|
| 1267 |
/* Restart the device to get it out of BUS-OFF state. |
| 1268 |
* Called when the user runs "ip link set can1 type can restart". |
| 1269 |
*/ |
| 1270 |
static int ucan_set_mode(struct net_device *netdev, enum can_mode mode) |
| 1271 |
{ |
| 1272 |
int ret; |
| 1273 |
unsigned long flags; |
| 1274 |
struct ucan_priv *up = netdev_priv(netdev); |
| 1275 |
|
| 1276 |
switch (mode) { |
| 1277 |
case CAN_MODE_START: |
| 1278 |
netdev_dbg(up->netdev, "restarting device\n"); |
| 1279 |
|
| 1280 |
ret = ucan_ctrl_command_out(up, UCAN_COMMAND_RESTART, 0, 0); |
| 1281 |
up->can.state = CAN_STATE_ERROR_ACTIVE; |
| 1282 |
|
| 1283 |
/* check if queue can be restarted, |
| 1284 |
* up->available_tx_urbs must be protected by the |
| 1285 |
* lock |
| 1286 |
*/ |
| 1287 |
spin_lock_irqsave(&up->context_lock, flags); |
| 1288 |
|
| 1289 |
if (up->available_tx_urbs > 0) |
| 1290 |
netif_wake_queue(up->netdev); |
| 1291 |
|
| 1292 |
spin_unlock_irqrestore(&up->context_lock, flags); |
| 1293 |
|
| 1294 |
return ret; |
| 1295 |
default: |
| 1296 |
return -EOPNOTSUPP; |
| 1297 |
} |
| 1298 |
} |
| 1299 |
|
| 1300 |
/* Probe the device, reset it and gather general device information */ |
| 1301 |
static int ucan_probe(struct usb_interface *intf, |
| 1302 |
const struct usb_device_id *id) |
| 1303 |
{ |
| 1304 |
int ret; |
| 1305 |
int i; |
| 1306 |
u32 protocol_version; |
| 1307 |
struct usb_device *udev; |
| 1308 |
struct net_device *netdev; |
| 1309 |
struct usb_host_interface *iface_desc; |
| 1310 |
struct ucan_priv *up; |
| 1311 |
struct usb_endpoint_descriptor *ep; |
| 1312 |
u16 in_ep_size; |
| 1313 |
u16 out_ep_size; |
| 1314 |
u8 in_ep_addr; |
| 1315 |
u8 out_ep_addr; |
| 1316 |
union ucan_ctl_payload *ctl_msg_buffer; |
| 1317 |
|
| 1318 |
udev = interface_to_usbdev(intf); |
| 1319 |
|
| 1320 |
/* Stage 1 - Interface Parsing |
| 1321 |
* --------------------------- |
| 1322 |
* |
| 1323 |
* Identifie the device USB interface descriptor and its |
| 1324 |
* endpoints. Probing is aborted on errors. |
| 1325 |
*/ |
| 1326 |
|
| 1327 |
/* check if the interface is sane */ |
| 1328 |
iface_desc = intf->cur_altsetting; |
| 1329 |
if (!iface_desc) |
| 1330 |
return -ENODEV; |
| 1331 |
|
| 1332 |
dev_info(&udev->dev, |
| 1333 |
"%s: probing device on interface #%d\n", |
| 1334 |
UCAN_DRIVER_NAME, |
| 1335 |
iface_desc->desc.bInterfaceNumber); |
| 1336 |
|
| 1337 |
/* interface sanity check */ |
| 1338 |
if (iface_desc->desc.bNumEndpoints != 2) { |
| 1339 |
dev_err(&udev->dev, |
| 1340 |
"%s: invalid EP count (%d)", |
| 1341 |
UCAN_DRIVER_NAME, iface_desc->desc.bNumEndpoints); |
| 1342 |
goto err_firmware_needs_update; |
| 1343 |
} |
| 1344 |
|
| 1345 |
/* check interface endpoints */ |
| 1346 |
in_ep_addr = 0; |
| 1347 |
out_ep_addr = 0; |
| 1348 |
in_ep_size = 0; |
| 1349 |
out_ep_size = 0; |
| 1350 |
for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) { |
| 1351 |
ep = &iface_desc->endpoint[i].desc; |
| 1352 |
|
| 1353 |
if (((ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK) != 0) && |
| 1354 |
((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == |
| 1355 |
USB_ENDPOINT_XFER_BULK)) { |
| 1356 |
/* In Endpoint */ |
| 1357 |
in_ep_addr = ep->bEndpointAddress; |
| 1358 |
in_ep_addr &= USB_ENDPOINT_NUMBER_MASK; |
| 1359 |
in_ep_size = le16_to_cpu(ep->wMaxPacketSize); |
| 1360 |
} else if (((ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == |
| 1361 |
0) && |
| 1362 |
((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == |
| 1363 |
USB_ENDPOINT_XFER_BULK)) { |
| 1364 |
/* Out Endpoint */ |
| 1365 |
out_ep_addr = ep->bEndpointAddress; |
| 1366 |
out_ep_addr &= USB_ENDPOINT_NUMBER_MASK; |
| 1367 |
out_ep_size = le16_to_cpu(ep->wMaxPacketSize); |
| 1368 |
} |
| 1369 |
} |
| 1370 |
|
| 1371 |
/* check if interface is sane */ |
| 1372 |
if (!in_ep_addr || !out_ep_addr) { |
| 1373 |
dev_err(&udev->dev, "%s: invalid endpoint configuration\n", |
| 1374 |
UCAN_DRIVER_NAME); |
| 1375 |
goto err_firmware_needs_update; |
| 1376 |
} |
| 1377 |
if (in_ep_size < sizeof(struct ucan_message_in)) { |
| 1378 |
dev_err(&udev->dev, "%s: invalid in_ep MaxPacketSize\n", |
| 1379 |
UCAN_DRIVER_NAME); |
| 1380 |
goto err_firmware_needs_update; |
| 1381 |
} |
| 1382 |
if (out_ep_size < sizeof(struct ucan_message_out)) { |
| 1383 |
dev_err(&udev->dev, "%s: invalid out_ep MaxPacketSize\n", |
| 1384 |
UCAN_DRIVER_NAME); |
| 1385 |
goto err_firmware_needs_update; |
| 1386 |
} |
| 1387 |
|
| 1388 |
/* Stage 2 - Device Identification |
| 1389 |
* ------------------------------- |
| 1390 |
* |
| 1391 |
* The device interface seems to be a ucan device. Do further |
| 1392 |
* compatibility checks. On error probing is aborted, on |
| 1393 |
* success this stage leaves the ctl_msg_buffer with the |
| 1394 |
* reported contents of a GET_INFO command (supported |
| 1395 |
* bittimings, tx_fifo depth). This information is used in |
| 1396 |
* Stage 3 for the final driver initialisation. |
| 1397 |
*/ |
| 1398 |
|
| 1399 |
/* Prepare Memory for control transfers */ |
| 1400 |
ctl_msg_buffer = devm_kzalloc(&intf->dev, |
| 1401 |
sizeof(union ucan_ctl_payload), |
| 1402 |
GFP_KERNEL); |
| 1403 |
if (!ctl_msg_buffer) { |
| 1404 |
dev_err(&udev->dev, |
| 1405 |
"%s: failed to allocate control pipe memory\n", |
| 1406 |
UCAN_DRIVER_NAME); |
| 1407 |
return -ENOMEM; |
| 1408 |
} |
| 1409 |
|
| 1410 |
/* get protocol version |
| 1411 |
* |
| 1412 |
* note: ucan_ctrl_command_* wrappers cannot be used yet |
| 1413 |
* because `up` is initialised in Stage 3 |
| 1414 |
*/ |
| 1415 |
ret = usb_control_msg(udev, |
| 1416 |
usb_rcvctrlpipe(udev, 0), |
| 1417 |
UCAN_COMMAND_GET, |
| 1418 |
USB_DIR_IN | USB_TYPE_VENDOR | |
| 1419 |
USB_RECIP_INTERFACE, |
| 1420 |
UCAN_COMMAND_GET_PROTOCOL_VERSION, |
| 1421 |
iface_desc->desc.bInterfaceNumber, |
| 1422 |
ctl_msg_buffer, |
| 1423 |
sizeof(union ucan_ctl_payload), |
| 1424 |
UCAN_USB_CTL_PIPE_TIMEOUT); |
| 1425 |
|
| 1426 |
/* older firmware version do not support this command - those |
| 1427 |
* are not supported by this drive |
| 1428 |
*/ |
| 1429 |
if (ret != 4) { |
| 1430 |
dev_err(&udev->dev, |
| 1431 |
"%s: could not read protocol version, ret=%d\n", |
| 1432 |
UCAN_DRIVER_NAME, ret); |
| 1433 |
if (ret >= 0) |
| 1434 |
ret = -EINVAL; |
| 1435 |
goto err_firmware_needs_update; |
| 1436 |
} |
| 1437 |
|
| 1438 |
/* this driver currently supports protocol version 3 only */ |
| 1439 |
protocol_version = |
| 1440 |
le32_to_cpu(ctl_msg_buffer->cmd_get_protocol_version.version); |
| 1441 |
if (protocol_version < UCAN_PROTOCOL_VERSION_MIN || |
| 1442 |
protocol_version > UCAN_PROTOCOL_VERSION_MAX) { |
| 1443 |
dev_err(&udev->dev, |
| 1444 |
"%s: device protocol version %d is not supported\n", |
| 1445 |
UCAN_DRIVER_NAME, protocol_version); |
| 1446 |
goto err_firmware_needs_update; |
| 1447 |
} |
| 1448 |
|
| 1449 |
/* request the device information and store it in ctl_msg_buffer |
| 1450 |
* |
| 1451 |
* note: ucan_ctrl_command_* wrappers cannot be used yet |
| 1452 |
* because `up` is initialised in Stage 3 |
| 1453 |
*/ |
| 1454 |
ret = usb_control_msg(udev, |
| 1455 |
usb_rcvctrlpipe(udev, 0), |
| 1456 |
UCAN_COMMAND_GET, |
| 1457 |
USB_DIR_IN | USB_TYPE_VENDOR | |
| 1458 |
USB_RECIP_INTERFACE, |
| 1459 |
UCAN_COMMAND_GET_INFO, |
| 1460 |
iface_desc->desc.bInterfaceNumber, |
| 1461 |
ctl_msg_buffer, |
| 1462 |
sizeof(ctl_msg_buffer->cmd_get_device_info), |
| 1463 |
UCAN_USB_CTL_PIPE_TIMEOUT); |
| 1464 |
|
| 1465 |
if (ret < 0) { |
| 1466 |
dev_err(&udev->dev, "%s: failed to retrieve device info\n", |
| 1467 |
UCAN_DRIVER_NAME); |
| 1468 |
goto err_firmware_needs_update; |
| 1469 |
} |
| 1470 |
if (ret < sizeof(ctl_msg_buffer->cmd_get_device_info)) { |
| 1471 |
dev_err(&udev->dev, "%s: device reported invalid device info\n", |
| 1472 |
UCAN_DRIVER_NAME); |
| 1473 |
goto err_firmware_needs_update; |
| 1474 |
} |
| 1475 |
if (ctl_msg_buffer->cmd_get_device_info.tx_fifo == 0) { |
| 1476 |
dev_err(&udev->dev, |
| 1477 |
"%s: device reported invalid tx-fifo size\n", |
| 1478 |
UCAN_DRIVER_NAME); |
| 1479 |
goto err_firmware_needs_update; |
| 1480 |
} |
| 1481 |
|
| 1482 |
/* Stage 3 - Driver Initialisation |
| 1483 |
* ------------------------------- |
| 1484 |
* |
| 1485 |
* Register device to Linux, prepare private structures and |
| 1486 |
* reset the device. |
| 1487 |
*/ |
| 1488 |
|
| 1489 |
/* allocate driver resources */ |
| 1490 |
netdev = alloc_candev(sizeof(struct ucan_priv), |
| 1491 |
ctl_msg_buffer->cmd_get_device_info.tx_fifo); |
| 1492 |
if (!netdev) { |
| 1493 |
dev_err(&udev->dev, |
| 1494 |
"%s: cannot allocate candev\n", UCAN_DRIVER_NAME); |
| 1495 |
return -ENOMEM; |
| 1496 |
} |
| 1497 |
|
| 1498 |
up = netdev_priv(netdev); |
| 1499 |
|
| 1500 |
/* initialize data */ |
| 1501 |
up->udev = udev; |
| 1502 |
up->netdev = netdev; |
| 1503 |
up->intf_index = iface_desc->desc.bInterfaceNumber; |
| 1504 |
up->in_ep_addr = in_ep_addr; |
| 1505 |
up->out_ep_addr = out_ep_addr; |
| 1506 |
up->in_ep_size = in_ep_size; |
| 1507 |
up->ctl_msg_buffer = ctl_msg_buffer; |
| 1508 |
up->context_array = NULL; |
| 1509 |
up->available_tx_urbs = 0; |
| 1510 |
|
| 1511 |
up->can.state = CAN_STATE_STOPPED; |
| 1512 |
up->can.bittiming_const = &up->device_info.bittiming_const; |
| 1513 |
up->can.do_set_bittiming = ucan_set_bittiming; |
| 1514 |
up->can.do_set_mode = &ucan_set_mode; |
| 1515 |
spin_lock_init(&up->context_lock); |
| 1516 |
spin_lock_init(&up->echo_skb_lock); |
| 1517 |
netdev->netdev_ops = &ucan_netdev_ops; |
| 1518 |
netdev->ethtool_ops = &ucan_ethtool_ops; |
| 1519 |
|
| 1520 |
usb_set_intfdata(intf, up); |
| 1521 |
SET_NETDEV_DEV(netdev, &intf->dev); |
| 1522 |
|
| 1523 |
/* parse device information |
| 1524 |
* the data retrieved in Stage 2 is still available in |
| 1525 |
* up->ctl_msg_buffer |
| 1526 |
*/ |
| 1527 |
ucan_parse_device_info(up, &ctl_msg_buffer->cmd_get_device_info); |
| 1528 |
|
| 1529 |
/* device is compatible, reset it */ |
| 1530 |
ret = ucan_ctrl_command_out(up, UCAN_COMMAND_RESET, 0, 0); |
| 1531 |
if (ret < 0) |
| 1532 |
goto err_free_candev; |
| 1533 |
|
| 1534 |
init_usb_anchor(&up->rx_urbs); |
| 1535 |
init_usb_anchor(&up->tx_urbs); |
| 1536 |
|
| 1537 |
up->can.state = CAN_STATE_STOPPED; |
| 1538 |
|
| 1539 |
/* register the device */ |
| 1540 |
ret = register_candev(netdev); |
| 1541 |
if (ret) |
| 1542 |
goto err_free_candev; |
| 1543 |
|
| 1544 |
/* initialisation complete, log device info */ |
| 1545 |
netdev_info(up->netdev, "registered device\n"); |
| 1546 |
ucan_get_fw_str(up, up->ctl_msg_buffer->fw_str, |
| 1547 |
sizeof(up->ctl_msg_buffer->fw_str)); |
| 1548 |
netdev_info(up->netdev, "firmware string: %s\n", |
| 1549 |
up->ctl_msg_buffer->fw_str); |
| 1550 |
|
| 1551 |
/* success */ |
| 1552 |
return 0; |
| 1553 |
|
| 1554 |
err_free_candev: |
| 1555 |
free_candev(netdev); |
| 1556 |
return ret; |
| 1557 |
|
| 1558 |
err_firmware_needs_update: |
| 1559 |
dev_err(&udev->dev, |
| 1560 |
"%s: probe failed; try to update the device firmware\n", |
| 1561 |
UCAN_DRIVER_NAME); |
| 1562 |
return -ENODEV; |
| 1563 |
} |
| 1564 |
|
| 1565 |
/* disconnect the device */ |
| 1566 |
static void ucan_disconnect(struct usb_interface *intf) |
| 1567 |
{ |
| 1568 |
struct ucan_priv *up = usb_get_intfdata(intf); |
| 1569 |
|
| 1570 |
usb_set_intfdata(intf, NULL); |
| 1571 |
|
| 1572 |
if (up) { |
| 1573 |
unregister_candev(up->netdev); |
| 1574 |
free_candev(up->netdev); |
| 1575 |
} |
| 1576 |
} |
| 1577 |
|
| 1578 |
static struct usb_device_id ucan_table[] = { |
| 1579 |
/* Mule (soldered onto compute modules) */ |
| 1580 |
{USB_DEVICE_INTERFACE_NUMBER(0x2294, 0x425a, 0)}, |
| 1581 |
/* Seal (standalone USB stick) */ |
| 1582 |
{USB_DEVICE_INTERFACE_NUMBER(0x2294, 0x425b, 0)}, |
| 1583 |
{} /* Terminating entry */ |
| 1584 |
}; |
| 1585 |
|
| 1586 |
MODULE_DEVICE_TABLE(usb, ucan_table); |
| 1587 |
/* driver callbacks */ |
| 1588 |
static struct usb_driver ucan_driver = { |
| 1589 |
.name = UCAN_DRIVER_NAME, |
| 1590 |
.probe = ucan_probe, |
| 1591 |
.disconnect = ucan_disconnect, |
| 1592 |
.id_table = ucan_table, |
| 1593 |
}; |
| 1594 |
|
| 1595 |
module_usb_driver(ucan_driver); |
| 1596 |
|
| 1597 |
MODULE_LICENSE("GPL v2"); |
| 1598 |
MODULE_AUTHOR("Martin Elshuber <[email protected]>"); |
| 1599 |
MODULE_AUTHOR("Jakob Unterwurzacher <[email protected]>"); |
| 1600 |
MODULE_DESCRIPTION("Driver for Theobroma Systems UCAN devices"); |