| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Low-Level PCI Express Support for the SH7786 |
| 4 |
* |
| 5 |
* Copyright (C) 2009 - 2011 Paul Mundt |
| 6 |
*/ |
| 7 |
#define pr_fmt(fmt) "PCI: " fmt |
| 8 |
|
| 9 |
#include <linux/pci.h> |
| 10 |
#include <linux/init.h> |
| 11 |
#include <linux/kernel.h> |
| 12 |
#include <linux/io.h> |
| 13 |
#include <linux/async.h> |
| 14 |
#include <linux/delay.h> |
| 15 |
#include <linux/dma-map-ops.h> |
| 16 |
#include <linux/slab.h> |
| 17 |
#include <linux/clk.h> |
| 18 |
#include <linux/sh_clk.h> |
| 19 |
#include <linux/sh_intc.h> |
| 20 |
#include <cpu/sh7786.h> |
| 21 |
#include "pcie-sh7786.h" |
| 22 |
#include <linux/sizes.h> |
| 23 |
|
| 24 |
struct sh7786_pcie_port { |
| 25 |
struct pci_channel *hose; |
| 26 |
struct clk *fclk, phy_clk; |
| 27 |
unsigned int index; |
| 28 |
int endpoint; |
| 29 |
int link; |
| 30 |
}; |
| 31 |
|
| 32 |
static struct sh7786_pcie_port *sh7786_pcie_ports; |
| 33 |
static unsigned int nr_ports; |
| 34 |
size_t memsize; |
| 35 |
u64 memstart; |
| 36 |
|
| 37 |
static struct sh7786_pcie_hwops { |
| 38 |
int (*core_init)(void); |
| 39 |
async_func_t port_init_hw; |
| 40 |
} *sh7786_pcie_hwops; |
| 41 |
|
| 42 |
static struct resource sh7786_pci0_resources[] = { |
| 43 |
{ |
| 44 |
.name = "PCIe0 MEM 0", |
| 45 |
.start = 0xfd000000, |
| 46 |
.end = 0xfd000000 + SZ_8M - 1, |
| 47 |
.flags = IORESOURCE_MEM, |
| 48 |
}, { |
| 49 |
.name = "PCIe0 MEM 1", |
| 50 |
.start = 0xc0000000, |
| 51 |
.end = 0xc0000000 + SZ_512M - 1, |
| 52 |
.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT, |
| 53 |
}, { |
| 54 |
.name = "PCIe0 MEM 2", |
| 55 |
.start = 0x10000000, |
| 56 |
.end = 0x10000000 + SZ_64M - 1, |
| 57 |
.flags = IORESOURCE_MEM, |
| 58 |
}, { |
| 59 |
.name = "PCIe0 IO", |
| 60 |
.start = 0xfe100000, |
| 61 |
.end = 0xfe100000 + SZ_1M - 1, |
| 62 |
.flags = IORESOURCE_IO, |
| 63 |
}, |
| 64 |
}; |
| 65 |
|
| 66 |
static struct resource sh7786_pci1_resources[] = { |
| 67 |
{ |
| 68 |
.name = "PCIe1 MEM 0", |
| 69 |
.start = 0xfd800000, |
| 70 |
.end = 0xfd800000 + SZ_8M - 1, |
| 71 |
.flags = IORESOURCE_MEM, |
| 72 |
}, { |
| 73 |
.name = "PCIe1 MEM 1", |
| 74 |
.start = 0xa0000000, |
| 75 |
.end = 0xa0000000 + SZ_512M - 1, |
| 76 |
.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT, |
| 77 |
}, { |
| 78 |
.name = "PCIe1 MEM 2", |
| 79 |
.start = 0x30000000, |
| 80 |
.end = 0x30000000 + SZ_256M - 1, |
| 81 |
.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT, |
| 82 |
}, { |
| 83 |
.name = "PCIe1 IO", |
| 84 |
.start = 0xfe300000, |
| 85 |
.end = 0xfe300000 + SZ_1M - 1, |
| 86 |
.flags = IORESOURCE_IO, |
| 87 |
}, |
| 88 |
}; |
| 89 |
|
| 90 |
static struct resource sh7786_pci2_resources[] = { |
| 91 |
{ |
| 92 |
.name = "PCIe2 MEM 0", |
| 93 |
.start = 0xfc800000, |
| 94 |
.end = 0xfc800000 + SZ_4M - 1, |
| 95 |
.flags = IORESOURCE_MEM, |
| 96 |
}, { |
| 97 |
.name = "PCIe2 MEM 1", |
| 98 |
.start = 0x80000000, |
| 99 |
.end = 0x80000000 + SZ_512M - 1, |
| 100 |
.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT, |
| 101 |
}, { |
| 102 |
.name = "PCIe2 MEM 2", |
| 103 |
.start = 0x20000000, |
| 104 |
.end = 0x20000000 + SZ_256M - 1, |
| 105 |
.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT, |
| 106 |
}, { |
| 107 |
.name = "PCIe2 IO", |
| 108 |
.start = 0xfcd00000, |
| 109 |
.end = 0xfcd00000 + SZ_1M - 1, |
| 110 |
.flags = IORESOURCE_IO, |
| 111 |
}, |
| 112 |
}; |
| 113 |
|
| 114 |
extern struct pci_ops sh7786_pci_ops; |
| 115 |
|
| 116 |
#define DEFINE_CONTROLLER(start, idx) \ |
| 117 |
{ \ |
| 118 |
.pci_ops = &sh7786_pci_ops, \ |
| 119 |
.resources = sh7786_pci##idx##_resources, \ |
| 120 |
.nr_resources = ARRAY_SIZE(sh7786_pci##idx##_resources), \ |
| 121 |
.reg_base = start, \ |
| 122 |
.mem_offset = 0, \ |
| 123 |
.io_offset = 0, \ |
| 124 |
} |
| 125 |
|
| 126 |
static struct pci_channel sh7786_pci_channels[] = { |
| 127 |
DEFINE_CONTROLLER(0xfe000000, 0), |
| 128 |
DEFINE_CONTROLLER(0xfe200000, 1), |
| 129 |
DEFINE_CONTROLLER(0xfcc00000, 2), |
| 130 |
}; |
| 131 |
|
| 132 |
static struct clk fixed_pciexclkp = { |
| 133 |
.rate = 100000000, /* 100 MHz reference clock */ |
| 134 |
}; |
| 135 |
|
| 136 |
static void sh7786_pci_fixup(struct pci_dev *dev) |
| 137 |
{ |
| 138 |
/* |
| 139 |
* Prevent enumeration of root complex resources. |
| 140 |
*/ |
| 141 |
if (pci_is_root_bus(dev->bus) && dev->devfn == 0) { |
| 142 |
struct resource *r; |
| 143 |
|
| 144 |
pci_dev_for_each_resource(dev, r) { |
| 145 |
r->start = 0; |
| 146 |
r->end = 0; |
| 147 |
r->flags = 0; |
| 148 |
} |
| 149 |
} |
| 150 |
} |
| 151 |
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_RENESAS, PCI_DEVICE_ID_RENESAS_SH7786, |
| 152 |
sh7786_pci_fixup); |
| 153 |
|
| 154 |
static int __init phy_wait_for_ack(struct pci_channel *chan) |
| 155 |
{ |
| 156 |
unsigned int timeout = 100; |
| 157 |
|
| 158 |
while (timeout--) { |
| 159 |
if (pci_read_reg(chan, SH4A_PCIEPHYADRR) & (1 << BITS_ACK)) |
| 160 |
return 0; |
| 161 |
|
| 162 |
udelay(100); |
| 163 |
} |
| 164 |
|
| 165 |
return -ETIMEDOUT; |
| 166 |
} |
| 167 |
|
| 168 |
static int __init pci_wait_for_irq(struct pci_channel *chan, unsigned int mask) |
| 169 |
{ |
| 170 |
unsigned int timeout = 100; |
| 171 |
|
| 172 |
while (timeout--) { |
| 173 |
if ((pci_read_reg(chan, SH4A_PCIEINTR) & mask) == mask) |
| 174 |
return 0; |
| 175 |
|
| 176 |
udelay(100); |
| 177 |
} |
| 178 |
|
| 179 |
return -ETIMEDOUT; |
| 180 |
} |
| 181 |
|
| 182 |
static void __init phy_write_reg(struct pci_channel *chan, unsigned int addr, |
| 183 |
unsigned int lane, unsigned int data) |
| 184 |
{ |
| 185 |
unsigned long phyaddr; |
| 186 |
|
| 187 |
phyaddr = (1 << BITS_CMD) + ((lane & 0xf) << BITS_LANE) + |
| 188 |
((addr & 0xff) << BITS_ADR); |
| 189 |
|
| 190 |
/* Set write data */ |
| 191 |
pci_write_reg(chan, data, SH4A_PCIEPHYDOUTR); |
| 192 |
pci_write_reg(chan, phyaddr, SH4A_PCIEPHYADRR); |
| 193 |
|
| 194 |
phy_wait_for_ack(chan); |
| 195 |
|
| 196 |
/* Clear command */ |
| 197 |
pci_write_reg(chan, 0, SH4A_PCIEPHYDOUTR); |
| 198 |
pci_write_reg(chan, 0, SH4A_PCIEPHYADRR); |
| 199 |
|
| 200 |
phy_wait_for_ack(chan); |
| 201 |
} |
| 202 |
|
| 203 |
static int __init pcie_clk_init(struct sh7786_pcie_port *port) |
| 204 |
{ |
| 205 |
struct pci_channel *chan = port->hose; |
| 206 |
struct clk *clk; |
| 207 |
char fclk_name[16]; |
| 208 |
int ret; |
| 209 |
|
| 210 |
/* |
| 211 |
* First register the fixed clock |
| 212 |
*/ |
| 213 |
ret = clk_register(&fixed_pciexclkp); |
| 214 |
if (unlikely(ret != 0)) |
| 215 |
return ret; |
| 216 |
|
| 217 |
/* |
| 218 |
* Grab the port's function clock, which the PHY clock depends |
| 219 |
* on. clock lookups don't help us much at this point, since no |
| 220 |
* dev_id is available this early. Lame. |
| 221 |
*/ |
| 222 |
snprintf(fclk_name, sizeof(fclk_name), "pcie%d_fck", port->index); |
| 223 |
|
| 224 |
port->fclk = clk_get(NULL, fclk_name); |
| 225 |
if (IS_ERR(port->fclk)) { |
| 226 |
ret = PTR_ERR(port->fclk); |
| 227 |
goto err_fclk; |
| 228 |
} |
| 229 |
|
| 230 |
clk_enable(port->fclk); |
| 231 |
|
| 232 |
/* |
| 233 |
* And now, set up the PHY clock |
| 234 |
*/ |
| 235 |
clk = &port->phy_clk; |
| 236 |
|
| 237 |
memset(clk, 0, sizeof(struct clk)); |
| 238 |
|
| 239 |
clk->parent = &fixed_pciexclkp; |
| 240 |
clk->enable_reg = (void __iomem *)(chan->reg_base + SH4A_PCIEPHYCTLR); |
| 241 |
clk->enable_bit = BITS_CKE; |
| 242 |
|
| 243 |
ret = sh_clk_mstp_register(clk, 1); |
| 244 |
if (unlikely(ret < 0)) |
| 245 |
goto err_phy; |
| 246 |
|
| 247 |
return 0; |
| 248 |
|
| 249 |
err_phy: |
| 250 |
clk_disable(port->fclk); |
| 251 |
clk_put(port->fclk); |
| 252 |
err_fclk: |
| 253 |
clk_unregister(&fixed_pciexclkp); |
| 254 |
|
| 255 |
return ret; |
| 256 |
} |
| 257 |
|
| 258 |
static int __init phy_init(struct sh7786_pcie_port *port) |
| 259 |
{ |
| 260 |
struct pci_channel *chan = port->hose; |
| 261 |
unsigned int timeout = 100; |
| 262 |
|
| 263 |
clk_enable(&port->phy_clk); |
| 264 |
|
| 265 |
/* Initialize the phy */ |
| 266 |
phy_write_reg(chan, 0x60, 0xf, 0x004b008b); |
| 267 |
phy_write_reg(chan, 0x61, 0xf, 0x00007b41); |
| 268 |
phy_write_reg(chan, 0x64, 0xf, 0x00ff4f00); |
| 269 |
phy_write_reg(chan, 0x65, 0xf, 0x09070907); |
| 270 |
phy_write_reg(chan, 0x66, 0xf, 0x00000010); |
| 271 |
phy_write_reg(chan, 0x74, 0xf, 0x0007001c); |
| 272 |
phy_write_reg(chan, 0x79, 0xf, 0x01fc000d); |
| 273 |
phy_write_reg(chan, 0xb0, 0xf, 0x00000610); |
| 274 |
|
| 275 |
/* Deassert Standby */ |
| 276 |
phy_write_reg(chan, 0x67, 0x1, 0x00000400); |
| 277 |
|
| 278 |
/* Disable clock */ |
| 279 |
clk_disable(&port->phy_clk); |
| 280 |
|
| 281 |
while (timeout--) { |
| 282 |
if (pci_read_reg(chan, SH4A_PCIEPHYSR)) |
| 283 |
return 0; |
| 284 |
|
| 285 |
udelay(100); |
| 286 |
} |
| 287 |
|
| 288 |
return -ETIMEDOUT; |
| 289 |
} |
| 290 |
|
| 291 |
static void __init pcie_reset(struct sh7786_pcie_port *port) |
| 292 |
{ |
| 293 |
struct pci_channel *chan = port->hose; |
| 294 |
|
| 295 |
pci_write_reg(chan, 1, SH4A_PCIESRSTR); |
| 296 |
pci_write_reg(chan, 0, SH4A_PCIETCTLR); |
| 297 |
pci_write_reg(chan, 0, SH4A_PCIESRSTR); |
| 298 |
pci_write_reg(chan, 0, SH4A_PCIETXVC0SR); |
| 299 |
} |
| 300 |
|
| 301 |
static int __init pcie_init(struct sh7786_pcie_port *port) |
| 302 |
{ |
| 303 |
struct pci_channel *chan = port->hose; |
| 304 |
unsigned int data; |
| 305 |
phys_addr_t memstart, memend; |
| 306 |
int ret, i, win; |
| 307 |
|
| 308 |
/* Begin initialization */ |
| 309 |
pcie_reset(port); |
| 310 |
|
| 311 |
/* |
| 312 |
* Initial header for port config space is type 1, set the device |
| 313 |
* class to match. Hardware takes care of propagating the IDSETR |
| 314 |
* settings, so there is no need to bother with a quirk. |
| 315 |
*/ |
| 316 |
pci_write_reg(chan, PCI_CLASS_BRIDGE_PCI_NORMAL << 8, SH4A_PCIEIDSETR1); |
| 317 |
|
| 318 |
/* Initialize default capabilities. */ |
| 319 |
data = pci_read_reg(chan, SH4A_PCIEEXPCAP0); |
| 320 |
data &= ~(PCI_EXP_FLAGS_TYPE << 16); |
| 321 |
|
| 322 |
if (port->endpoint) |
| 323 |
data |= PCI_EXP_TYPE_ENDPOINT << 20; |
| 324 |
else |
| 325 |
data |= PCI_EXP_TYPE_ROOT_PORT << 20; |
| 326 |
|
| 327 |
data |= PCI_CAP_ID_EXP; |
| 328 |
pci_write_reg(chan, data, SH4A_PCIEEXPCAP0); |
| 329 |
|
| 330 |
/* Enable data link layer active state reporting */ |
| 331 |
pci_write_reg(chan, PCI_EXP_LNKCAP_DLLLARC, SH4A_PCIEEXPCAP3); |
| 332 |
|
| 333 |
/* Enable extended sync and ASPM L0s support */ |
| 334 |
data = pci_read_reg(chan, SH4A_PCIEEXPCAP4); |
| 335 |
data &= ~PCI_EXP_LNKCTL_ASPMC; |
| 336 |
data |= PCI_EXP_LNKCTL_ES | 1; |
| 337 |
pci_write_reg(chan, data, SH4A_PCIEEXPCAP4); |
| 338 |
|
| 339 |
/* Write out the physical slot number */ |
| 340 |
data = pci_read_reg(chan, SH4A_PCIEEXPCAP5); |
| 341 |
data &= ~PCI_EXP_SLTCAP_PSN; |
| 342 |
data |= (port->index + 1) << 19; |
| 343 |
pci_write_reg(chan, data, SH4A_PCIEEXPCAP5); |
| 344 |
|
| 345 |
/* Set the completion timer timeout to the maximum 32ms. */ |
| 346 |
data = pci_read_reg(chan, SH4A_PCIETLCTLR); |
| 347 |
data &= ~0x3f00; |
| 348 |
data |= 0x32 << 8; |
| 349 |
pci_write_reg(chan, data, SH4A_PCIETLCTLR); |
| 350 |
|
| 351 |
/* |
| 352 |
* Set fast training sequences to the maximum 255, |
| 353 |
* and enable MAC data scrambling. |
| 354 |
*/ |
| 355 |
data = pci_read_reg(chan, SH4A_PCIEMACCTLR); |
| 356 |
data &= ~PCIEMACCTLR_SCR_DIS; |
| 357 |
data |= (0xff << 16); |
| 358 |
pci_write_reg(chan, data, SH4A_PCIEMACCTLR); |
| 359 |
|
| 360 |
memstart = __pa(memory_start); |
| 361 |
memend = __pa(memory_end); |
| 362 |
memsize = roundup_pow_of_two(memend - memstart); |
| 363 |
|
| 364 |
/* |
| 365 |
* The start address must be aligned on its size. So we round |
| 366 |
* it down, and then recalculate the size so that it covers |
| 367 |
* the entire memory. |
| 368 |
*/ |
| 369 |
memstart = ALIGN_DOWN(memstart, memsize); |
| 370 |
memsize = roundup_pow_of_two(memend - memstart); |
| 371 |
|
| 372 |
/* |
| 373 |
* If there's more than 512MB of memory, we need to roll over to |
| 374 |
* LAR1/LAMR1. |
| 375 |
*/ |
| 376 |
if (memsize > SZ_512M) { |
| 377 |
pci_write_reg(chan, memstart + SZ_512M, SH4A_PCIELAR1); |
| 378 |
pci_write_reg(chan, ((memsize - SZ_512M) - SZ_256) | 1, |
| 379 |
SH4A_PCIELAMR1); |
| 380 |
memsize = SZ_512M; |
| 381 |
} else { |
| 382 |
/* |
| 383 |
* Otherwise just zero it out and disable it. |
| 384 |
*/ |
| 385 |
pci_write_reg(chan, 0, SH4A_PCIELAR1); |
| 386 |
pci_write_reg(chan, 0, SH4A_PCIELAMR1); |
| 387 |
} |
| 388 |
|
| 389 |
/* |
| 390 |
* LAR0/LAMR0 covers up to the first 512MB, which is enough to |
| 391 |
* cover all of lowmem on most platforms. |
| 392 |
*/ |
| 393 |
pci_write_reg(chan, memstart, SH4A_PCIELAR0); |
| 394 |
pci_write_reg(chan, (memsize - SZ_256) | 1, SH4A_PCIELAMR0); |
| 395 |
|
| 396 |
/* Finish initialization */ |
| 397 |
data = pci_read_reg(chan, SH4A_PCIETCTLR); |
| 398 |
data |= 0x1; |
| 399 |
pci_write_reg(chan, data, SH4A_PCIETCTLR); |
| 400 |
|
| 401 |
/* Let things settle down a bit.. */ |
| 402 |
mdelay(100); |
| 403 |
|
| 404 |
/* Enable DL_Active Interrupt generation */ |
| 405 |
data = pci_read_reg(chan, SH4A_PCIEDLINTENR); |
| 406 |
data |= PCIEDLINTENR_DLL_ACT_ENABLE; |
| 407 |
pci_write_reg(chan, data, SH4A_PCIEDLINTENR); |
| 408 |
|
| 409 |
/* Disable MAC data scrambling. */ |
| 410 |
data = pci_read_reg(chan, SH4A_PCIEMACCTLR); |
| 411 |
data |= PCIEMACCTLR_SCR_DIS | (0xff << 16); |
| 412 |
pci_write_reg(chan, data, SH4A_PCIEMACCTLR); |
| 413 |
|
| 414 |
/* |
| 415 |
* This will timeout if we don't have a link, but we permit the |
| 416 |
* port to register anyways in order to support hotplug on future |
| 417 |
* hardware. |
| 418 |
*/ |
| 419 |
ret = pci_wait_for_irq(chan, MASK_INT_TX_CTRL); |
| 420 |
|
| 421 |
data = pci_read_reg(chan, SH4A_PCIEPCICONF1); |
| 422 |
data &= ~(PCI_STATUS_DEVSEL_MASK << 16); |
| 423 |
data |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | |
| 424 |
(PCI_STATUS_CAP_LIST | PCI_STATUS_DEVSEL_FAST) << 16; |
| 425 |
pci_write_reg(chan, data, SH4A_PCIEPCICONF1); |
| 426 |
|
| 427 |
pci_write_reg(chan, 0x80888000, SH4A_PCIETXVC0DCTLR); |
| 428 |
pci_write_reg(chan, 0x00222000, SH4A_PCIERXVC0DCTLR); |
| 429 |
|
| 430 |
wmb(); |
| 431 |
|
| 432 |
if (ret == 0) { |
| 433 |
data = pci_read_reg(chan, SH4A_PCIEMACSR); |
| 434 |
printk(KERN_NOTICE "PCI: PCIe#%d x%d link detected\n", |
| 435 |
port->index, (data >> 20) & 0x3f); |
| 436 |
} else |
| 437 |
printk(KERN_NOTICE "PCI: PCIe#%d link down\n", |
| 438 |
port->index); |
| 439 |
|
| 440 |
for (i = win = 0; i < chan->nr_resources; i++) { |
| 441 |
struct resource *res = chan->resources + i; |
| 442 |
resource_size_t size; |
| 443 |
u32 mask; |
| 444 |
|
| 445 |
/* |
| 446 |
* We can't use the 32-bit mode windows in legacy 29-bit |
| 447 |
* mode, so just skip them entirely. |
| 448 |
*/ |
| 449 |
if ((res->flags & IORESOURCE_MEM_32BIT) && __in_29bit_mode()) |
| 450 |
res->flags |= IORESOURCE_DISABLED; |
| 451 |
|
| 452 |
if (res->flags & IORESOURCE_DISABLED) |
| 453 |
continue; |
| 454 |
|
| 455 |
pci_write_reg(chan, 0x00000000, SH4A_PCIEPTCTLR(win)); |
| 456 |
|
| 457 |
/* |
| 458 |
* The PAMR mask is calculated in units of 256kB, which |
| 459 |
* keeps things pretty simple. |
| 460 |
*/ |
| 461 |
size = resource_size(res); |
| 462 |
mask = (roundup_pow_of_two(size) / SZ_256K) - 1; |
| 463 |
pci_write_reg(chan, mask << 18, SH4A_PCIEPAMR(win)); |
| 464 |
|
| 465 |
pci_write_reg(chan, upper_32_bits(res->start), |
| 466 |
SH4A_PCIEPARH(win)); |
| 467 |
pci_write_reg(chan, lower_32_bits(res->start), |
| 468 |
SH4A_PCIEPARL(win)); |
| 469 |
|
| 470 |
mask = MASK_PARE; |
| 471 |
if (res->flags & IORESOURCE_IO) |
| 472 |
mask |= MASK_SPC; |
| 473 |
|
| 474 |
pci_write_reg(chan, mask, SH4A_PCIEPTCTLR(win)); |
| 475 |
|
| 476 |
win++; |
| 477 |
} |
| 478 |
|
| 479 |
return 0; |
| 480 |
} |
| 481 |
|
| 482 |
int pcibios_map_platform_irq(const struct pci_dev *pdev, u8 slot, u8 pin) |
| 483 |
{ |
| 484 |
return evt2irq(0xae0); |
| 485 |
} |
| 486 |
|
| 487 |
void pcibios_bus_add_device(struct pci_dev *pdev) |
| 488 |
{ |
| 489 |
dma_direct_set_offset(&pdev->dev, __pa(memory_start), |
| 490 |
__pa(memory_start) - memstart, memsize); |
| 491 |
} |
| 492 |
|
| 493 |
static int __init sh7786_pcie_core_init(void) |
| 494 |
{ |
| 495 |
/* Return the number of ports */ |
| 496 |
return test_mode_pin(MODE_PIN12) ? 3 : 2; |
| 497 |
} |
| 498 |
|
| 499 |
static void __init sh7786_pcie_init_hw(void *data, async_cookie_t cookie) |
| 500 |
{ |
| 501 |
struct sh7786_pcie_port *port = data; |
| 502 |
int ret; |
| 503 |
|
| 504 |
/* |
| 505 |
* Check if we are configured in endpoint or root complex mode, |
| 506 |
* this is a fixed pin setting that applies to all PCIe ports. |
| 507 |
*/ |
| 508 |
port->endpoint = test_mode_pin(MODE_PIN11); |
| 509 |
|
| 510 |
/* |
| 511 |
* Setup clocks, needed both for PHY and PCIe registers. |
| 512 |
*/ |
| 513 |
ret = pcie_clk_init(port); |
| 514 |
if (unlikely(ret < 0)) { |
| 515 |
pr_err("clock initialization failed for port#%d\n", |
| 516 |
port->index); |
| 517 |
return; |
| 518 |
} |
| 519 |
|
| 520 |
ret = phy_init(port); |
| 521 |
if (unlikely(ret < 0)) { |
| 522 |
pr_err("phy initialization failed for port#%d\n", |
| 523 |
port->index); |
| 524 |
return; |
| 525 |
} |
| 526 |
|
| 527 |
ret = pcie_init(port); |
| 528 |
if (unlikely(ret < 0)) { |
| 529 |
pr_err("core initialization failed for port#%d\n", |
| 530 |
port->index); |
| 531 |
return; |
| 532 |
} |
| 533 |
|
| 534 |
/* In the interest of preserving device ordering, synchronize */ |
| 535 |
async_synchronize_cookie(cookie); |
| 536 |
|
| 537 |
register_pci_controller(port->hose); |
| 538 |
} |
| 539 |
|
| 540 |
static struct sh7786_pcie_hwops sh7786_65nm_pcie_hwops __initdata = { |
| 541 |
.core_init = sh7786_pcie_core_init, |
| 542 |
.port_init_hw = sh7786_pcie_init_hw, |
| 543 |
}; |
| 544 |
|
| 545 |
static int __init sh7786_pcie_init(void) |
| 546 |
{ |
| 547 |
struct clk *platclk; |
| 548 |
u32 mm_sel; |
| 549 |
int i; |
| 550 |
|
| 551 |
printk(KERN_NOTICE "PCI: Starting initialization.\n"); |
| 552 |
|
| 553 |
sh7786_pcie_hwops = &sh7786_65nm_pcie_hwops; |
| 554 |
|
| 555 |
nr_ports = sh7786_pcie_hwops->core_init(); |
| 556 |
BUG_ON(nr_ports > ARRAY_SIZE(sh7786_pci_channels)); |
| 557 |
|
| 558 |
if (unlikely(nr_ports == 0)) |
| 559 |
return -ENODEV; |
| 560 |
|
| 561 |
sh7786_pcie_ports = kzalloc_objs(struct sh7786_pcie_port, nr_ports); |
| 562 |
if (unlikely(!sh7786_pcie_ports)) |
| 563 |
return -ENOMEM; |
| 564 |
|
| 565 |
/* |
| 566 |
* Fetch any optional platform clock associated with this block. |
| 567 |
* |
| 568 |
* This is a rather nasty hack for boards with spec-mocking FPGAs |
| 569 |
* that have a secondary set of clocks outside of the on-chip |
| 570 |
* ones that need to be accounted for before there is any chance |
| 571 |
* of touching the existing MSTP bits or CPG clocks. |
| 572 |
*/ |
| 573 |
platclk = clk_get(NULL, "pcie_plat_clk"); |
| 574 |
if (IS_ERR(platclk)) { |
| 575 |
/* Sane hardware should probably get a WARN_ON.. */ |
| 576 |
platclk = NULL; |
| 577 |
} |
| 578 |
|
| 579 |
clk_enable(platclk); |
| 580 |
|
| 581 |
mm_sel = sh7786_mm_sel(); |
| 582 |
|
| 583 |
/* |
| 584 |
* Depending on the MMSELR register value, the PCIe0 MEM 1 |
| 585 |
* area may not be available. See Table 13.11 of the SH7786 |
| 586 |
* datasheet. |
| 587 |
*/ |
| 588 |
if (mm_sel != 1 && mm_sel != 2 && mm_sel != 5 && mm_sel != 6) |
| 589 |
sh7786_pci0_resources[2].flags |= IORESOURCE_DISABLED; |
| 590 |
|
| 591 |
printk(KERN_NOTICE "PCI: probing %d ports.\n", nr_ports); |
| 592 |
|
| 593 |
for (i = 0; i < nr_ports; i++) { |
| 594 |
struct sh7786_pcie_port *port = sh7786_pcie_ports + i; |
| 595 |
|
| 596 |
port->index = i; |
| 597 |
port->hose = sh7786_pci_channels + i; |
| 598 |
port->hose->io_map_base = port->hose->resources[0].start; |
| 599 |
|
| 600 |
async_schedule(sh7786_pcie_hwops->port_init_hw, port); |
| 601 |
} |
| 602 |
|
| 603 |
async_synchronize_full(); |
| 604 |
|
| 605 |
return 0; |
| 606 |
} |
| 607 |
arch_initcall(sh7786_pcie_init); |