| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Low-Level PCI Support for the SH7780 |
| 4 |
* |
| 5 |
* Copyright (C) 2005 - 2010 Paul Mundt |
| 6 |
*/ |
| 7 |
#include <linux/types.h> |
| 8 |
#include <linux/kernel.h> |
| 9 |
#include <linux/init.h> |
| 10 |
#include <linux/pci.h> |
| 11 |
#include <linux/interrupt.h> |
| 12 |
#include <linux/timer.h> |
| 13 |
#include <linux/irq.h> |
| 14 |
#include <linux/errno.h> |
| 15 |
#include <linux/delay.h> |
| 16 |
#include <linux/log2.h> |
| 17 |
#include "pci-sh4.h" |
| 18 |
#include <asm/mmu.h> |
| 19 |
#include <linux/sizes.h> |
| 20 |
|
| 21 |
#if defined(CONFIG_CPU_BIG_ENDIAN) |
| 22 |
# define PCICR_ENDIANNESS SH4_PCICR_BSWP |
| 23 |
#else |
| 24 |
# define PCICR_ENDIANNESS 0 |
| 25 |
#endif |
| 26 |
|
| 27 |
|
| 28 |
static struct resource sh7785_pci_resources[] = { |
| 29 |
{ |
| 30 |
.name = "PCI IO", |
| 31 |
.start = 0x1000, |
| 32 |
.end = SZ_4M - 1, |
| 33 |
.flags = IORESOURCE_IO, |
| 34 |
}, { |
| 35 |
.name = "PCI MEM 0", |
| 36 |
.start = 0xfd000000, |
| 37 |
.end = 0xfd000000 + SZ_16M - 1, |
| 38 |
.flags = IORESOURCE_MEM, |
| 39 |
}, { |
| 40 |
.name = "PCI MEM 1", |
| 41 |
.start = 0x10000000, |
| 42 |
.end = 0x10000000 + SZ_64M - 1, |
| 43 |
.flags = IORESOURCE_MEM, |
| 44 |
}, { |
| 45 |
/* |
| 46 |
* 32-bit only resources must be last. |
| 47 |
*/ |
| 48 |
.name = "PCI MEM 2", |
| 49 |
.start = 0xc0000000, |
| 50 |
.end = 0xc0000000 + SZ_512M - 1, |
| 51 |
.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT, |
| 52 |
}, |
| 53 |
}; |
| 54 |
|
| 55 |
static struct pci_channel sh7780_pci_controller = { |
| 56 |
.pci_ops = &sh4_pci_ops, |
| 57 |
.resources = sh7785_pci_resources, |
| 58 |
.nr_resources = ARRAY_SIZE(sh7785_pci_resources), |
| 59 |
.io_offset = 0, |
| 60 |
.mem_offset = 0, |
| 61 |
.io_map_base = 0xfe200000, |
| 62 |
.serr_irq = evt2irq(0xa00), |
| 63 |
.err_irq = evt2irq(0xaa0), |
| 64 |
}; |
| 65 |
|
| 66 |
struct pci_errors { |
| 67 |
unsigned int mask; |
| 68 |
const char *str; |
| 69 |
} pci_arbiter_errors[] = { |
| 70 |
{ SH4_PCIAINT_MBKN, "master broken" }, |
| 71 |
{ SH4_PCIAINT_TBTO, "target bus time out" }, |
| 72 |
{ SH4_PCIAINT_MBTO, "master bus time out" }, |
| 73 |
{ SH4_PCIAINT_TABT, "target abort" }, |
| 74 |
{ SH4_PCIAINT_MABT, "master abort" }, |
| 75 |
{ SH4_PCIAINT_RDPE, "read data parity error" }, |
| 76 |
{ SH4_PCIAINT_WDPE, "write data parity error" }, |
| 77 |
}, pci_interrupt_errors[] = { |
| 78 |
{ SH4_PCIINT_MLCK, "master lock error" }, |
| 79 |
{ SH4_PCIINT_TABT, "target-target abort" }, |
| 80 |
{ SH4_PCIINT_TRET, "target retry time out" }, |
| 81 |
{ SH4_PCIINT_MFDE, "master function disable error" }, |
| 82 |
{ SH4_PCIINT_PRTY, "address parity error" }, |
| 83 |
{ SH4_PCIINT_SERR, "SERR" }, |
| 84 |
{ SH4_PCIINT_TWDP, "data parity error for target write" }, |
| 85 |
{ SH4_PCIINT_TRDP, "PERR detected for target read" }, |
| 86 |
{ SH4_PCIINT_MTABT, "target abort for master" }, |
| 87 |
{ SH4_PCIINT_MMABT, "master abort for master" }, |
| 88 |
{ SH4_PCIINT_MWPD, "master write data parity error" }, |
| 89 |
{ SH4_PCIINT_MRPD, "master read data parity error" }, |
| 90 |
}; |
| 91 |
|
| 92 |
static irqreturn_t sh7780_pci_err_irq(int irq, void *dev_id) |
| 93 |
{ |
| 94 |
struct pci_channel *hose = dev_id; |
| 95 |
unsigned long addr; |
| 96 |
unsigned int status; |
| 97 |
unsigned int cmd; |
| 98 |
int i; |
| 99 |
|
| 100 |
addr = __raw_readl(hose->reg_base + SH4_PCIALR); |
| 101 |
|
| 102 |
/* |
| 103 |
* Handle status errors. |
| 104 |
*/ |
| 105 |
status = __raw_readw(hose->reg_base + PCI_STATUS); |
| 106 |
if (status & (PCI_STATUS_PARITY | |
| 107 |
PCI_STATUS_DETECTED_PARITY | |
| 108 |
PCI_STATUS_SIG_TARGET_ABORT | |
| 109 |
PCI_STATUS_REC_TARGET_ABORT | |
| 110 |
PCI_STATUS_REC_MASTER_ABORT)) { |
| 111 |
cmd = pcibios_handle_status_errors(addr, status, hose); |
| 112 |
if (likely(cmd)) |
| 113 |
__raw_writew(cmd, hose->reg_base + PCI_STATUS); |
| 114 |
} |
| 115 |
|
| 116 |
/* |
| 117 |
* Handle arbiter errors. |
| 118 |
*/ |
| 119 |
status = __raw_readl(hose->reg_base + SH4_PCIAINT); |
| 120 |
for (i = cmd = 0; i < ARRAY_SIZE(pci_arbiter_errors); i++) { |
| 121 |
if (status & pci_arbiter_errors[i].mask) { |
| 122 |
printk(KERN_DEBUG "PCI: %s, addr=%08lx\n", |
| 123 |
pci_arbiter_errors[i].str, addr); |
| 124 |
cmd |= pci_arbiter_errors[i].mask; |
| 125 |
} |
| 126 |
} |
| 127 |
__raw_writel(cmd, hose->reg_base + SH4_PCIAINT); |
| 128 |
|
| 129 |
/* |
| 130 |
* Handle the remaining PCI errors. |
| 131 |
*/ |
| 132 |
status = __raw_readl(hose->reg_base + SH4_PCIINT); |
| 133 |
for (i = cmd = 0; i < ARRAY_SIZE(pci_interrupt_errors); i++) { |
| 134 |
if (status & pci_interrupt_errors[i].mask) { |
| 135 |
printk(KERN_DEBUG "PCI: %s, addr=%08lx\n", |
| 136 |
pci_interrupt_errors[i].str, addr); |
| 137 |
cmd |= pci_interrupt_errors[i].mask; |
| 138 |
} |
| 139 |
} |
| 140 |
__raw_writel(cmd, hose->reg_base + SH4_PCIINT); |
| 141 |
|
| 142 |
return IRQ_HANDLED; |
| 143 |
} |
| 144 |
|
| 145 |
static irqreturn_t sh7780_pci_serr_irq(int irq, void *dev_id) |
| 146 |
{ |
| 147 |
struct pci_channel *hose = dev_id; |
| 148 |
|
| 149 |
printk(KERN_DEBUG "PCI: system error received: "); |
| 150 |
pcibios_report_status(PCI_STATUS_SIG_SYSTEM_ERROR, 1); |
| 151 |
pr_cont("\n"); |
| 152 |
|
| 153 |
/* Deassert SERR */ |
| 154 |
__raw_writel(SH4_PCIINTM_SDIM, hose->reg_base + SH4_PCIINTM); |
| 155 |
|
| 156 |
/* Back off the IRQ for awhile */ |
| 157 |
disable_irq_nosync(irq); |
| 158 |
hose->serr_timer.expires = jiffies + HZ; |
| 159 |
add_timer(&hose->serr_timer); |
| 160 |
|
| 161 |
return IRQ_HANDLED; |
| 162 |
} |
| 163 |
|
| 164 |
static int __init sh7780_pci_setup_irqs(struct pci_channel *hose) |
| 165 |
{ |
| 166 |
int ret; |
| 167 |
|
| 168 |
/* Clear out PCI arbiter IRQs */ |
| 169 |
__raw_writel(0, hose->reg_base + SH4_PCIAINT); |
| 170 |
|
| 171 |
/* Clear all error conditions */ |
| 172 |
__raw_writew(PCI_STATUS_DETECTED_PARITY | \ |
| 173 |
PCI_STATUS_SIG_SYSTEM_ERROR | \ |
| 174 |
PCI_STATUS_REC_MASTER_ABORT | \ |
| 175 |
PCI_STATUS_REC_TARGET_ABORT | \ |
| 176 |
PCI_STATUS_SIG_TARGET_ABORT | \ |
| 177 |
PCI_STATUS_PARITY, hose->reg_base + PCI_STATUS); |
| 178 |
|
| 179 |
ret = request_irq(hose->serr_irq, sh7780_pci_serr_irq, 0, |
| 180 |
"PCI SERR interrupt", hose); |
| 181 |
if (unlikely(ret)) { |
| 182 |
pr_err("PCI: Failed hooking SERR IRQ\n"); |
| 183 |
return ret; |
| 184 |
} |
| 185 |
|
| 186 |
/* |
| 187 |
* The PCI ERR IRQ needs to be IRQF_SHARED since all of the power |
| 188 |
* down IRQ vectors are routed through the ERR IRQ vector. We |
| 189 |
* only request_irq() once as there is only a single masking |
| 190 |
* source for multiple events. |
| 191 |
*/ |
| 192 |
ret = request_irq(hose->err_irq, sh7780_pci_err_irq, IRQF_SHARED, |
| 193 |
"PCI ERR interrupt", hose); |
| 194 |
if (unlikely(ret)) { |
| 195 |
free_irq(hose->serr_irq, hose); |
| 196 |
return ret; |
| 197 |
} |
| 198 |
|
| 199 |
/* Unmask all of the arbiter IRQs. */ |
| 200 |
__raw_writel(SH4_PCIAINT_MBKN | SH4_PCIAINT_TBTO | SH4_PCIAINT_MBTO | \ |
| 201 |
SH4_PCIAINT_TABT | SH4_PCIAINT_MABT | SH4_PCIAINT_RDPE | \ |
| 202 |
SH4_PCIAINT_WDPE, hose->reg_base + SH4_PCIAINTM); |
| 203 |
|
| 204 |
/* Unmask all of the PCI IRQs */ |
| 205 |
__raw_writel(SH4_PCIINTM_TTADIM | SH4_PCIINTM_TMTOIM | \ |
| 206 |
SH4_PCIINTM_MDEIM | SH4_PCIINTM_APEDIM | \ |
| 207 |
SH4_PCIINTM_SDIM | SH4_PCIINTM_DPEITWM | \ |
| 208 |
SH4_PCIINTM_PEDITRM | SH4_PCIINTM_TADIMM | \ |
| 209 |
SH4_PCIINTM_MADIMM | SH4_PCIINTM_MWPDIM | \ |
| 210 |
SH4_PCIINTM_MRDPEIM, hose->reg_base + SH4_PCIINTM); |
| 211 |
|
| 212 |
return ret; |
| 213 |
} |
| 214 |
|
| 215 |
static inline void __init sh7780_pci_teardown_irqs(struct pci_channel *hose) |
| 216 |
{ |
| 217 |
free_irq(hose->err_irq, hose); |
| 218 |
free_irq(hose->serr_irq, hose); |
| 219 |
} |
| 220 |
|
| 221 |
static void __init sh7780_pci66_init(struct pci_channel *hose) |
| 222 |
{ |
| 223 |
unsigned int tmp; |
| 224 |
|
| 225 |
if (!pci_is_66mhz_capable(hose, 0, 0)) |
| 226 |
return; |
| 227 |
|
| 228 |
/* Enable register access */ |
| 229 |
tmp = __raw_readl(hose->reg_base + SH4_PCICR); |
| 230 |
tmp |= SH4_PCICR_PREFIX; |
| 231 |
__raw_writel(tmp, hose->reg_base + SH4_PCICR); |
| 232 |
|
| 233 |
/* Enable 66MHz operation */ |
| 234 |
tmp = __raw_readw(hose->reg_base + PCI_STATUS); |
| 235 |
tmp |= PCI_STATUS_66MHZ; |
| 236 |
__raw_writew(tmp, hose->reg_base + PCI_STATUS); |
| 237 |
|
| 238 |
/* Done */ |
| 239 |
tmp = __raw_readl(hose->reg_base + SH4_PCICR); |
| 240 |
tmp |= SH4_PCICR_PREFIX | SH4_PCICR_CFIN; |
| 241 |
__raw_writel(tmp, hose->reg_base + SH4_PCICR); |
| 242 |
} |
| 243 |
|
| 244 |
static int __init sh7780_pci_init(void) |
| 245 |
{ |
| 246 |
struct pci_channel *chan = &sh7780_pci_controller; |
| 247 |
phys_addr_t memphys; |
| 248 |
size_t memsize; |
| 249 |
unsigned int id; |
| 250 |
const char *type; |
| 251 |
int ret, i; |
| 252 |
|
| 253 |
pr_notice("PCI: Starting initialization.\n"); |
| 254 |
|
| 255 |
chan->reg_base = 0xfe040000; |
| 256 |
|
| 257 |
/* Enable CPU access to the PCIC registers. */ |
| 258 |
__raw_writel(PCIECR_ENBL, PCIECR); |
| 259 |
|
| 260 |
/* Reset */ |
| 261 |
__raw_writel(SH4_PCICR_PREFIX | SH4_PCICR_PRST | PCICR_ENDIANNESS, |
| 262 |
chan->reg_base + SH4_PCICR); |
| 263 |
|
| 264 |
/* |
| 265 |
* Wait for it to come back up. The spec says to allow for up to |
| 266 |
* 1 second after toggling the reset pin, but in practice 100ms |
| 267 |
* is more than enough. |
| 268 |
*/ |
| 269 |
mdelay(100); |
| 270 |
|
| 271 |
id = __raw_readw(chan->reg_base + PCI_VENDOR_ID); |
| 272 |
if (id != PCI_VENDOR_ID_RENESAS) { |
| 273 |
pr_err("PCI: Unknown vendor ID 0x%04x.\n", id); |
| 274 |
return -ENODEV; |
| 275 |
} |
| 276 |
|
| 277 |
id = __raw_readw(chan->reg_base + PCI_DEVICE_ID); |
| 278 |
type = (id == PCI_DEVICE_ID_RENESAS_SH7763) ? "SH7763" : |
| 279 |
(id == PCI_DEVICE_ID_RENESAS_SH7780) ? "SH7780" : |
| 280 |
(id == PCI_DEVICE_ID_RENESAS_SH7781) ? "SH7781" : |
| 281 |
(id == PCI_DEVICE_ID_RENESAS_SH7785) ? "SH7785" : |
| 282 |
NULL; |
| 283 |
if (unlikely(!type)) { |
| 284 |
pr_err("PCI: Found an unsupported Renesas host controller, device id 0x%04x.\n", |
| 285 |
id); |
| 286 |
return -EINVAL; |
| 287 |
} |
| 288 |
|
| 289 |
pr_notice("PCI: Found a Renesas %s host controller, revision %d.\n", |
| 290 |
type, __raw_readb(chan->reg_base + PCI_REVISION_ID)); |
| 291 |
|
| 292 |
/* |
| 293 |
* Now throw it in to register initialization mode and |
| 294 |
* start the real work. |
| 295 |
*/ |
| 296 |
__raw_writel(SH4_PCICR_PREFIX | PCICR_ENDIANNESS, |
| 297 |
chan->reg_base + SH4_PCICR); |
| 298 |
|
| 299 |
memphys = __pa(memory_start); |
| 300 |
memsize = roundup_pow_of_two(memory_end - memory_start); |
| 301 |
|
| 302 |
/* |
| 303 |
* If there's more than 512MB of memory, we need to roll over to |
| 304 |
* LAR1/LSR1. |
| 305 |
*/ |
| 306 |
if (memsize > SZ_512M) { |
| 307 |
__raw_writel(memphys + SZ_512M, chan->reg_base + SH4_PCILAR1); |
| 308 |
__raw_writel((((memsize - SZ_512M) - SZ_1M) & 0x1ff00000) | 1, |
| 309 |
chan->reg_base + SH4_PCILSR1); |
| 310 |
memsize = SZ_512M; |
| 311 |
} else { |
| 312 |
/* |
| 313 |
* Otherwise just zero it out and disable it. |
| 314 |
*/ |
| 315 |
__raw_writel(0, chan->reg_base + SH4_PCILAR1); |
| 316 |
__raw_writel(0, chan->reg_base + SH4_PCILSR1); |
| 317 |
} |
| 318 |
|
| 319 |
/* |
| 320 |
* LAR0/LSR0 covers up to the first 512MB, which is enough to |
| 321 |
* cover all of lowmem on most platforms. |
| 322 |
*/ |
| 323 |
__raw_writel(memphys, chan->reg_base + SH4_PCILAR0); |
| 324 |
__raw_writel(((memsize - SZ_1M) & 0x1ff00000) | 1, |
| 325 |
chan->reg_base + SH4_PCILSR0); |
| 326 |
|
| 327 |
/* |
| 328 |
* Hook up the ERR and SERR IRQs. |
| 329 |
*/ |
| 330 |
ret = sh7780_pci_setup_irqs(chan); |
| 331 |
if (unlikely(ret)) |
| 332 |
return ret; |
| 333 |
|
| 334 |
/* |
| 335 |
* Disable the cache snoop controller for non-coherent DMA. |
| 336 |
*/ |
| 337 |
__raw_writel(0, chan->reg_base + SH7780_PCICSCR0); |
| 338 |
__raw_writel(0, chan->reg_base + SH7780_PCICSAR0); |
| 339 |
__raw_writel(0, chan->reg_base + SH7780_PCICSCR1); |
| 340 |
__raw_writel(0, chan->reg_base + SH7780_PCICSAR1); |
| 341 |
|
| 342 |
/* |
| 343 |
* Setup the memory BARs |
| 344 |
*/ |
| 345 |
for (i = 1; i < chan->nr_resources; i++) { |
| 346 |
struct resource *res = chan->resources + i; |
| 347 |
resource_size_t size; |
| 348 |
|
| 349 |
if (unlikely(res->flags & IORESOURCE_IO)) |
| 350 |
continue; |
| 351 |
|
| 352 |
/* |
| 353 |
* Make sure we're in the right physical addressing mode |
| 354 |
* for dealing with the resource. |
| 355 |
*/ |
| 356 |
if ((res->flags & IORESOURCE_MEM_32BIT) && __in_29bit_mode()) { |
| 357 |
chan->nr_resources--; |
| 358 |
continue; |
| 359 |
} |
| 360 |
|
| 361 |
size = resource_size(res); |
| 362 |
|
| 363 |
/* |
| 364 |
* The MBMR mask is calculated in units of 256kB, which |
| 365 |
* keeps things pretty simple. |
| 366 |
*/ |
| 367 |
__raw_writel(((roundup_pow_of_two(size) / SZ_256K) - 1) << 18, |
| 368 |
chan->reg_base + SH7780_PCIMBMR(i - 1)); |
| 369 |
__raw_writel(res->start, chan->reg_base + SH7780_PCIMBR(i - 1)); |
| 370 |
} |
| 371 |
|
| 372 |
/* |
| 373 |
* And I/O. |
| 374 |
*/ |
| 375 |
__raw_writel(0, chan->reg_base + PCI_BASE_ADDRESS_0); |
| 376 |
__raw_writel(0, chan->reg_base + SH7780_PCIIOBR); |
| 377 |
__raw_writel(0, chan->reg_base + SH7780_PCIIOBMR); |
| 378 |
|
| 379 |
__raw_writew(PCI_COMMAND_SERR | PCI_COMMAND_WAIT | \ |
| 380 |
PCI_COMMAND_PARITY | PCI_COMMAND_MASTER | \ |
| 381 |
PCI_COMMAND_MEMORY, chan->reg_base + PCI_COMMAND); |
| 382 |
|
| 383 |
/* |
| 384 |
* Initialization mode complete, release the control register and |
| 385 |
* enable round robin mode to stop device overruns/starvation. |
| 386 |
*/ |
| 387 |
__raw_writel(SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_FTO | |
| 388 |
PCICR_ENDIANNESS, |
| 389 |
chan->reg_base + SH4_PCICR); |
| 390 |
|
| 391 |
ret = register_pci_controller(chan); |
| 392 |
if (unlikely(ret)) |
| 393 |
goto err; |
| 394 |
|
| 395 |
sh7780_pci66_init(chan); |
| 396 |
|
| 397 |
pr_notice("PCI: Running at %dMHz.\n", |
| 398 |
(__raw_readw(chan->reg_base + PCI_STATUS) & PCI_STATUS_66MHZ) |
| 399 |
? 66 : 33); |
| 400 |
|
| 401 |
return 0; |
| 402 |
|
| 403 |
err: |
| 404 |
sh7780_pci_teardown_irqs(chan); |
| 405 |
return ret; |
| 406 |
} |
| 407 |
arch_initcall(sh7780_pci_init); |