| 1 |
/* |
| 2 |
* This file is subject to the terms and conditions of the GNU General Public |
| 3 |
* License. See the file "COPYING" in the main directory of this archive |
| 4 |
* for more details. |
| 5 |
* |
| 6 |
* Derived from IRIX <sys/SN/SN0/hubio.h>, Revision 1.80. |
| 7 |
* |
| 8 |
* Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc. |
| 9 |
* Copyright (C) 1999 by Ralf Baechle |
| 10 |
*/ |
| 11 |
#ifndef _ASM_SGI_SN_SN0_HUBIO_H |
| 12 |
#define _ASM_SGI_SN_SN0_HUBIO_H |
| 13 |
|
| 14 |
/* |
| 15 |
* Hub I/O interface registers |
| 16 |
* |
| 17 |
* All registers in this file are subject to change until Hub chip tapeout. |
| 18 |
* In general, the longer software name should be used when available. |
| 19 |
*/ |
| 20 |
|
| 21 |
/* |
| 22 |
* Slightly friendlier names for some common registers. |
| 23 |
* The hardware definitions follow. |
| 24 |
*/ |
| 25 |
#define IIO_WIDGET IIO_WID /* Widget identification */ |
| 26 |
#define IIO_WIDGET_STAT IIO_WSTAT /* Widget status register */ |
| 27 |
#define IIO_WIDGET_CTRL IIO_WCR /* Widget control register */ |
| 28 |
#define IIO_WIDGET_TOUT IIO_WRTO /* Widget request timeout */ |
| 29 |
#define IIO_WIDGET_FLUSH IIO_WTFR /* Widget target flush */ |
| 30 |
#define IIO_PROTECT IIO_ILAPR /* IO interface protection */ |
| 31 |
#define IIO_PROTECT_OVRRD IIO_ILAPO /* IO protect override */ |
| 32 |
#define IIO_OUTWIDGET_ACCESS IIO_IOWA /* Outbound widget access */ |
| 33 |
#define IIO_INWIDGET_ACCESS IIO_IIWA /* Inbound widget access */ |
| 34 |
#define IIO_INDEV_ERR_MASK IIO_IIDEM /* Inbound device error mask */ |
| 35 |
#define IIO_LLP_CSR IIO_ILCSR /* LLP control and status */ |
| 36 |
#define IIO_LLP_LOG IIO_ILLR /* LLP log */ |
| 37 |
#define IIO_XTALKCC_TOUT IIO_IXCC /* Xtalk credit count timeout*/ |
| 38 |
#define IIO_XTALKTT_TOUT IIO_IXTT /* Xtalk tail timeout */ |
| 39 |
#define IIO_IO_ERR_CLR IIO_IECLR /* IO error clear */ |
| 40 |
#define IIO_BTE_CRB_CNT IIO_IBCN /* IO BTE CRB count */ |
| 41 |
|
| 42 |
#define IIO_LLP_CSR_IS_UP 0x00002000 |
| 43 |
#define IIO_LLP_CSR_LLP_STAT_MASK 0x00003000 |
| 44 |
#define IIO_LLP_CSR_LLP_STAT_SHFT 12 |
| 45 |
|
| 46 |
/* key to IIO_PROTECT_OVRRD */ |
| 47 |
#define IIO_PROTECT_OVRRD_KEY 0x53474972756c6573ull /* "SGIrules" */ |
| 48 |
|
| 49 |
/* BTE register names */ |
| 50 |
#define IIO_BTE_STAT_0 IIO_IBLS_0 /* Also BTE length/status 0 */ |
| 51 |
#define IIO_BTE_SRC_0 IIO_IBSA_0 /* Also BTE source address 0 */ |
| 52 |
#define IIO_BTE_DEST_0 IIO_IBDA_0 /* Also BTE dest. address 0 */ |
| 53 |
#define IIO_BTE_CTRL_0 IIO_IBCT_0 /* Also BTE control/terminate 0 */ |
| 54 |
#define IIO_BTE_NOTIFY_0 IIO_IBNA_0 /* Also BTE notification 0 */ |
| 55 |
#define IIO_BTE_INT_0 IIO_IBIA_0 /* Also BTE interrupt 0 */ |
| 56 |
#define IIO_BTE_OFF_0 0 /* Base offset from BTE 0 regs. */ |
| 57 |
#define IIO_BTE_OFF_1 IIO_IBLS_1 - IIO_IBLS_0 /* Offset from base to BTE 1 */ |
| 58 |
|
| 59 |
/* BTE register offsets from base */ |
| 60 |
#define BTEOFF_STAT 0 |
| 61 |
#define BTEOFF_SRC (IIO_BTE_SRC_0 - IIO_BTE_STAT_0) |
| 62 |
#define BTEOFF_DEST (IIO_BTE_DEST_0 - IIO_BTE_STAT_0) |
| 63 |
#define BTEOFF_CTRL (IIO_BTE_CTRL_0 - IIO_BTE_STAT_0) |
| 64 |
#define BTEOFF_NOTIFY (IIO_BTE_NOTIFY_0 - IIO_BTE_STAT_0) |
| 65 |
#define BTEOFF_INT (IIO_BTE_INT_0 - IIO_BTE_STAT_0) |
| 66 |
|
| 67 |
|
| 68 |
/* |
| 69 |
* The following definitions use the names defined in the IO interface |
| 70 |
* document for ease of reference. When possible, software should |
| 71 |
* generally use the longer but clearer names defined above. |
| 72 |
*/ |
| 73 |
|
| 74 |
#define IIO_BASE 0x400000 |
| 75 |
#define IIO_BASE_BTE0 0x410000 |
| 76 |
#define IIO_BASE_BTE1 0x420000 |
| 77 |
#define IIO_BASE_PERF 0x430000 |
| 78 |
#define IIO_PERF_CNT 0x430008 |
| 79 |
|
| 80 |
#define IO_PERF_SETS 32 |
| 81 |
|
| 82 |
#define IIO_WID 0x400000 /* Widget identification */ |
| 83 |
#define IIO_WSTAT 0x400008 /* Widget status */ |
| 84 |
#define IIO_WCR 0x400020 /* Widget control */ |
| 85 |
|
| 86 |
#define IIO_WSTAT_ECRAZY (1ULL << 32) /* Hub gone crazy */ |
| 87 |
#define IIO_WSTAT_TXRETRY (1ULL << 9) /* Hub Tx Retry timeout */ |
| 88 |
#define IIO_WSTAT_TXRETRY_MASK (0x7F) |
| 89 |
#define IIO_WSTAT_TXRETRY_SHFT (16) |
| 90 |
#define IIO_WSTAT_TXRETRY_CNT(w) (((w) >> IIO_WSTAT_TXRETRY_SHFT) & \ |
| 91 |
IIO_WSTAT_TXRETRY_MASK) |
| 92 |
|
| 93 |
#define IIO_ILAPR 0x400100 /* Local Access Protection */ |
| 94 |
#define IIO_ILAPO 0x400108 /* Protection override */ |
| 95 |
#define IIO_IOWA 0x400110 /* outbound widget access */ |
| 96 |
#define IIO_IIWA 0x400118 /* inbound widget access */ |
| 97 |
#define IIO_IIDEM 0x400120 /* Inbound Device Error Mask */ |
| 98 |
#define IIO_ILCSR 0x400128 /* LLP control and status */ |
| 99 |
#define IIO_ILLR 0x400130 /* LLP Log */ |
| 100 |
#define IIO_IIDSR 0x400138 /* Interrupt destination */ |
| 101 |
|
| 102 |
#define IIO_IIBUSERR 0x1400208 /* Reads here cause a bus error. */ |
| 103 |
|
| 104 |
/* IO Interrupt Destination Register */ |
| 105 |
#define IIO_IIDSR_SENT_SHIFT 28 |
| 106 |
#define IIO_IIDSR_SENT_MASK 0x10000000 |
| 107 |
#define IIO_IIDSR_ENB_SHIFT 24 |
| 108 |
#define IIO_IIDSR_ENB_MASK 0x01000000 |
| 109 |
#define IIO_IIDSR_NODE_SHIFT 8 |
| 110 |
#define IIO_IIDSR_NODE_MASK 0x0000ff00 |
| 111 |
#define IIO_IIDSR_LVL_SHIFT 0 |
| 112 |
#define IIO_IIDSR_LVL_MASK 0x0000003f |
| 113 |
|
| 114 |
|
| 115 |
/* GFX Flow Control Node/Widget Register */ |
| 116 |
#define IIO_IGFX_0 0x400140 /* gfx node/widget register 0 */ |
| 117 |
#define IIO_IGFX_1 0x400148 /* gfx node/widget register 1 */ |
| 118 |
#define IIO_IGFX_W_NUM_BITS 4 /* size of widget num field */ |
| 119 |
#define IIO_IGFX_W_NUM_MASK ((1<<IIO_IGFX_W_NUM_BITS)-1) |
| 120 |
#define IIO_IGFX_W_NUM_SHIFT 0 |
| 121 |
#define IIO_IGFX_N_NUM_BITS 9 /* size of node num field */ |
| 122 |
#define IIO_IGFX_N_NUM_MASK ((1<<IIO_IGFX_N_NUM_BITS)-1) |
| 123 |
#define IIO_IGFX_N_NUM_SHIFT 4 |
| 124 |
#define IIO_IGFX_P_NUM_BITS 1 /* size of processor num field */ |
| 125 |
#define IIO_IGFX_P_NUM_MASK ((1<<IIO_IGFX_P_NUM_BITS)-1) |
| 126 |
#define IIO_IGFX_P_NUM_SHIFT 16 |
| 127 |
#define IIO_IGFX_VLD_BITS 1 /* size of valid field */ |
| 128 |
#define IIO_IGFX_VLD_MASK ((1<<IIO_IGFX_VLD_BITS)-1) |
| 129 |
#define IIO_IGFX_VLD_SHIFT 20 |
| 130 |
#define IIO_IGFX_INIT(widget, node, cpu, valid) (\ |
| 131 |
(((widget) & IIO_IGFX_W_NUM_MASK) << IIO_IGFX_W_NUM_SHIFT) | \ |
| 132 |
(((node) & IIO_IGFX_N_NUM_MASK) << IIO_IGFX_N_NUM_SHIFT) | \ |
| 133 |
(((cpu) & IIO_IGFX_P_NUM_MASK) << IIO_IGFX_P_NUM_SHIFT) | \ |
| 134 |
(((valid) & IIO_IGFX_VLD_MASK) << IIO_IGFX_VLD_SHIFT) ) |
| 135 |
|
| 136 |
/* Scratch registers (not all bits available) */ |
| 137 |
#define IIO_SCRATCH_REG0 0x400150 |
| 138 |
#define IIO_SCRATCH_REG1 0x400158 |
| 139 |
#define IIO_SCRATCH_MASK 0x0000000f00f11fff |
| 140 |
|
| 141 |
#define IIO_SCRATCH_BIT0_0 0x0000000800000000 |
| 142 |
#define IIO_SCRATCH_BIT0_1 0x0000000400000000 |
| 143 |
#define IIO_SCRATCH_BIT0_2 0x0000000200000000 |
| 144 |
#define IIO_SCRATCH_BIT0_3 0x0000000100000000 |
| 145 |
#define IIO_SCRATCH_BIT0_4 0x0000000000800000 |
| 146 |
#define IIO_SCRATCH_BIT0_5 0x0000000000400000 |
| 147 |
#define IIO_SCRATCH_BIT0_6 0x0000000000200000 |
| 148 |
#define IIO_SCRATCH_BIT0_7 0x0000000000100000 |
| 149 |
#define IIO_SCRATCH_BIT0_8 0x0000000000010000 |
| 150 |
#define IIO_SCRATCH_BIT0_9 0x0000000000001000 |
| 151 |
#define IIO_SCRATCH_BIT0_R 0x0000000000000fff |
| 152 |
|
| 153 |
/* IO Translation Table Entries */ |
| 154 |
#define IIO_NUM_ITTES 7 /* ITTEs numbered 0..6 */ |
| 155 |
/* Hw manuals number them 1..7! */ |
| 156 |
|
| 157 |
/* |
| 158 |
* As a permanent workaround for a bug in the PI side of the hub, we've |
| 159 |
* redefined big window 7 as small window 0. |
| 160 |
*/ |
| 161 |
#define HUB_NUM_BIG_WINDOW IIO_NUM_ITTES - 1 |
| 162 |
|
| 163 |
/* |
| 164 |
* Use the top big window as a surrogate for the first small window |
| 165 |
*/ |
| 166 |
#define SWIN0_BIGWIN HUB_NUM_BIG_WINDOW |
| 167 |
|
| 168 |
#define ILCSR_WARM_RESET 0x100 |
| 169 |
/* |
| 170 |
* The IO LLP control status register and widget control register |
| 171 |
*/ |
| 172 |
#ifndef __ASSEMBLER__ |
| 173 |
|
| 174 |
typedef union hubii_wid_u { |
| 175 |
u64 wid_reg_value; |
| 176 |
struct { |
| 177 |
u64 wid_rsvd: 32, /* unused */ |
| 178 |
wid_rev_num: 4, /* revision number */ |
| 179 |
wid_part_num: 16, /* the widget type: hub=c101 */ |
| 180 |
wid_mfg_num: 11, /* Manufacturer id (IBM) */ |
| 181 |
wid_rsvd1: 1; /* Reserved */ |
| 182 |
} wid_fields_s; |
| 183 |
} hubii_wid_t; |
| 184 |
|
| 185 |
|
| 186 |
typedef union hubii_wcr_u { |
| 187 |
u64 wcr_reg_value; |
| 188 |
struct { |
| 189 |
u64 wcr_rsvd: 41, /* unused */ |
| 190 |
wcr_e_thresh: 5, /* elasticity threshold */ |
| 191 |
wcr_dir_con: 1, /* widget direct connect */ |
| 192 |
wcr_f_bad_pkt: 1, /* Force bad llp pkt enable */ |
| 193 |
wcr_xbar_crd: 3, /* LLP crossbar credit */ |
| 194 |
wcr_rsvd1: 8, /* Reserved */ |
| 195 |
wcr_tag_mode: 1, /* Tag mode */ |
| 196 |
wcr_widget_id: 4; /* LLP crossbar credit */ |
| 197 |
} wcr_fields_s; |
| 198 |
} hubii_wcr_t; |
| 199 |
|
| 200 |
#define iwcr_dir_con wcr_fields_s.wcr_dir_con |
| 201 |
|
| 202 |
typedef union hubii_wstat_u { |
| 203 |
u64 reg_value; |
| 204 |
struct { |
| 205 |
u64 rsvd1: 31, |
| 206 |
crazy: 1, /* Crazy bit */ |
| 207 |
rsvd2: 8, |
| 208 |
llp_tx_cnt: 8, /* LLP Xmit retry counter */ |
| 209 |
rsvd3: 6, |
| 210 |
tx_max_rtry: 1, /* LLP Retry Timeout Signal */ |
| 211 |
rsvd4: 2, |
| 212 |
xt_tail_to: 1, /* Xtalk Tail Timeout */ |
| 213 |
xt_crd_to: 1, /* Xtalk Credit Timeout */ |
| 214 |
pending: 4; /* Pending Requests */ |
| 215 |
} wstat_fields_s; |
| 216 |
} hubii_wstat_t; |
| 217 |
|
| 218 |
|
| 219 |
typedef union hubii_ilcsr_u { |
| 220 |
u64 icsr_reg_value; |
| 221 |
struct { |
| 222 |
u64 icsr_rsvd: 22, /* unused */ |
| 223 |
icsr_max_burst: 10, /* max burst */ |
| 224 |
icsr_rsvd4: 6, /* reserved */ |
| 225 |
icsr_max_retry: 10, /* max retry */ |
| 226 |
icsr_rsvd3: 2, /* reserved */ |
| 227 |
icsr_lnk_stat: 2, /* link status */ |
| 228 |
icsr_bm8: 1, /* Bit mode 8 */ |
| 229 |
icsr_llp_en: 1, /* LLP enable bit */ |
| 230 |
icsr_rsvd2: 1, /* reserver */ |
| 231 |
icsr_wrm_reset: 1, /* Warm reset bit */ |
| 232 |
icsr_rsvd1: 2, /* Data ready offset */ |
| 233 |
icsr_null_to: 6; /* Null timeout */ |
| 234 |
|
| 235 |
} icsr_fields_s; |
| 236 |
} hubii_ilcsr_t; |
| 237 |
|
| 238 |
|
| 239 |
typedef union hubii_iowa_u { |
| 240 |
u64 iowa_reg_value; |
| 241 |
struct { |
| 242 |
u64 iowa_rsvd: 48, /* unused */ |
| 243 |
iowa_wxoac: 8, /* xtalk widget access bits */ |
| 244 |
iowa_rsvd1: 7, /* xtalk widget access bits */ |
| 245 |
iowa_w0oac: 1; /* xtalk widget access bits */ |
| 246 |
} iowa_fields_s; |
| 247 |
} hubii_iowa_t; |
| 248 |
|
| 249 |
typedef union hubii_iiwa_u { |
| 250 |
u64 iiwa_reg_value; |
| 251 |
struct { |
| 252 |
u64 iiwa_rsvd: 48, /* unused */ |
| 253 |
iiwa_wxiac: 8, /* hub wid access bits */ |
| 254 |
iiwa_rsvd1: 7, /* reserved */ |
| 255 |
iiwa_w0iac: 1; /* hub wid0 access */ |
| 256 |
} iiwa_fields_s; |
| 257 |
} hubii_iiwa_t; |
| 258 |
|
| 259 |
typedef union hubii_illr_u { |
| 260 |
u64 illr_reg_value; |
| 261 |
struct { |
| 262 |
u64 illr_rsvd: 32, /* unused */ |
| 263 |
illr_cb_cnt: 16, /* checkbit error count */ |
| 264 |
illr_sn_cnt: 16; /* sequence number count */ |
| 265 |
} illr_fields_s; |
| 266 |
} hubii_illr_t; |
| 267 |
|
| 268 |
/* The structures below are defined to extract and modify the ii |
| 269 |
performance registers */ |
| 270 |
|
| 271 |
/* io_perf_sel allows the caller to specify what tests will be |
| 272 |
performed */ |
| 273 |
typedef union io_perf_sel { |
| 274 |
u64 perf_sel_reg; |
| 275 |
struct { |
| 276 |
u64 perf_rsvd : 48, |
| 277 |
perf_icct : 8, |
| 278 |
perf_ippr1 : 4, |
| 279 |
perf_ippr0 : 4; |
| 280 |
} perf_sel_bits; |
| 281 |
} io_perf_sel_t; |
| 282 |
|
| 283 |
/* io_perf_cnt is to extract the count from the hub registers. Due to |
| 284 |
hardware problems there is only one counter, not two. */ |
| 285 |
|
| 286 |
typedef union io_perf_cnt { |
| 287 |
u64 perf_cnt; |
| 288 |
struct { |
| 289 |
u64 perf_rsvd1 : 32, |
| 290 |
perf_rsvd2 : 12, |
| 291 |
perf_cnt : 20; |
| 292 |
} perf_cnt_bits; |
| 293 |
} io_perf_cnt_t; |
| 294 |
|
| 295 |
#endif /* !__ASSEMBLER__ */ |
| 296 |
|
| 297 |
|
| 298 |
#define LNK_STAT_WORKING 0x2 |
| 299 |
|
| 300 |
#define IIO_LLP_CB_MAX 0xffff |
| 301 |
#define IIO_LLP_SN_MAX 0xffff |
| 302 |
|
| 303 |
/* IO PRB Entries */ |
| 304 |
#define IIO_NUM_IPRBS (9) |
| 305 |
#define IIO_IOPRB_0 0x400198 /* PRB entry 0 */ |
| 306 |
#define IIO_IOPRB_8 0x4001a0 /* PRB entry 8 */ |
| 307 |
#define IIO_IOPRB_9 0x4001a8 /* PRB entry 9 */ |
| 308 |
#define IIO_IOPRB_A 0x4001b0 /* PRB entry a */ |
| 309 |
#define IIO_IOPRB_B 0x4001b8 /* PRB entry b */ |
| 310 |
#define IIO_IOPRB_C 0x4001c0 /* PRB entry c */ |
| 311 |
#define IIO_IOPRB_D 0x4001c8 /* PRB entry d */ |
| 312 |
#define IIO_IOPRB_E 0x4001d0 /* PRB entry e */ |
| 313 |
#define IIO_IOPRB_F 0x4001d8 /* PRB entry f */ |
| 314 |
|
| 315 |
|
| 316 |
#define IIO_IXCC 0x4001e0 /* Crosstalk credit count timeout */ |
| 317 |
#define IIO_IXTCC IIO_IXCC |
| 318 |
#define IIO_IMEM 0x4001e8 /* Miscellaneous Enable Mask */ |
| 319 |
#define IIO_IXTT 0x4001f0 /* Crosstalk tail timeout */ |
| 320 |
#define IIO_IECLR 0x4001f8 /* IO error clear */ |
| 321 |
#define IIO_IBCN 0x400200 /* IO BTE CRB count */ |
| 322 |
|
| 323 |
/* |
| 324 |
* IIO_IMEM Register fields. |
| 325 |
*/ |
| 326 |
#define IIO_IMEM_W0ESD 0x1 /* Widget 0 shut down due to error */ |
| 327 |
#define IIO_IMEM_B0ESD (1 << 4) /* BTE 0 shut down due to error */ |
| 328 |
#define IIO_IMEM_B1ESD (1 << 8) /* BTE 1 Shut down due to error */ |
| 329 |
|
| 330 |
/* PIO Read address Table Entries */ |
| 331 |
#define IIO_IPCA 0x400300 /* PRB Counter adjust */ |
| 332 |
#define IIO_NUM_PRTES 8 /* Total number of PRB table entries */ |
| 333 |
#define IIO_PRTE_0 0x400308 /* PIO Read address table entry 0 */ |
| 334 |
#define IIO_PRTE(_x) (IIO_PRTE_0 + (8 * (_x))) |
| 335 |
#define IIO_WIDPRTE(x) IIO_PRTE(((x) - 8)) /* widget ID to its PRTE num */ |
| 336 |
#define IIO_IPDR 0x400388 /* PIO table entry deallocation */ |
| 337 |
#define IIO_ICDR 0x400390 /* CRB Entry Deallocation */ |
| 338 |
#define IIO_IFDR 0x400398 /* IOQ FIFO Depth */ |
| 339 |
#define IIO_IIAP 0x4003a0 /* IIQ Arbitration Parameters */ |
| 340 |
#define IIO_IMMR IIO_IIAP |
| 341 |
#define IIO_ICMR 0x4003a8 /* CRB Management Register */ |
| 342 |
#define IIO_ICCR 0x4003b0 /* CRB Control Register */ |
| 343 |
#define IIO_ICTO 0x4003b8 /* CRB Time Out Register */ |
| 344 |
#define IIO_ICTP 0x4003c0 /* CRB Time Out Prescalar */ |
| 345 |
|
| 346 |
|
| 347 |
/* |
| 348 |
* ICMR register fields |
| 349 |
*/ |
| 350 |
#define IIO_ICMR_PC_VLD_SHFT 36 |
| 351 |
#define IIO_ICMR_PC_VLD_MASK (0x7fffUL << IIO_ICMR_PC_VLD_SHFT) |
| 352 |
|
| 353 |
#define IIO_ICMR_CRB_VLD_SHFT 20 |
| 354 |
#define IIO_ICMR_CRB_VLD_MASK (0x7fffUL << IIO_ICMR_CRB_VLD_SHFT) |
| 355 |
|
| 356 |
#define IIO_ICMR_FC_CNT_SHFT 16 |
| 357 |
#define IIO_ICMR_FC_CNT_MASK (0xf << IIO_ICMR_FC_CNT_SHFT) |
| 358 |
|
| 359 |
#define IIO_ICMR_C_CNT_SHFT 4 |
| 360 |
#define IIO_ICMR_C_CNT_MASK (0xf << IIO_ICMR_C_CNT_SHFT) |
| 361 |
|
| 362 |
#define IIO_ICMR_P_CNT_SHFT 0 |
| 363 |
#define IIO_ICMR_P_CNT_MASK (0xf << IIO_ICMR_P_CNT_SHFT) |
| 364 |
|
| 365 |
#define IIO_ICMR_PRECISE (1UL << 52) |
| 366 |
#define IIO_ICMR_CLR_RPPD (1UL << 13) |
| 367 |
#define IIO_ICMR_CLR_RQPD (1UL << 12) |
| 368 |
|
| 369 |
/* |
| 370 |
* IIO PIO Deallocation register field masks : (IIO_IPDR) |
| 371 |
*/ |
| 372 |
#define IIO_IPDR_PND (1 << 4) |
| 373 |
|
| 374 |
/* |
| 375 |
* IIO CRB deallocation register field masks: (IIO_ICDR) |
| 376 |
*/ |
| 377 |
#define IIO_ICDR_PND (1 << 4) |
| 378 |
|
| 379 |
/* |
| 380 |
* IIO CRB control register Fields: IIO_ICCR |
| 381 |
*/ |
| 382 |
#define IIO_ICCR_PENDING (0x10000) |
| 383 |
#define IIO_ICCR_CMD_MASK (0xFF) |
| 384 |
#define IIO_ICCR_CMD_SHFT (7) |
| 385 |
#define IIO_ICCR_CMD_NOP (0x0) /* No Op */ |
| 386 |
#define IIO_ICCR_CMD_WAKE (0x100) /* Reactivate CRB entry and process */ |
| 387 |
#define IIO_ICCR_CMD_TIMEOUT (0x200) /* Make CRB timeout & mark invalid */ |
| 388 |
#define IIO_ICCR_CMD_EJECT (0x400) /* Contents of entry written to memory |
| 389 |
* via a WB |
| 390 |
*/ |
| 391 |
#define IIO_ICCR_CMD_FLUSH (0x800) |
| 392 |
|
| 393 |
/* |
| 394 |
* CRB manipulation macros |
| 395 |
* The CRB macros are slightly complicated, since there are up to |
| 396 |
* four registers associated with each CRB entry. |
| 397 |
*/ |
| 398 |
#define IIO_NUM_CRBS 15 /* Number of CRBs */ |
| 399 |
#define IIO_NUM_NORMAL_CRBS 12 /* Number of regular CRB entries */ |
| 400 |
#define IIO_NUM_PC_CRBS 4 /* Number of partial cache CRBs */ |
| 401 |
#define IIO_ICRB_OFFSET 8 |
| 402 |
#define IIO_ICRB_0 0x400400 |
| 403 |
/* XXX - This is now tuneable: |
| 404 |
#define IIO_FIRST_PC_ENTRY 12 |
| 405 |
*/ |
| 406 |
|
| 407 |
#define IIO_ICRB_A(_x) (IIO_ICRB_0 + (4 * IIO_ICRB_OFFSET * (_x))) |
| 408 |
#define IIO_ICRB_B(_x) (IIO_ICRB_A(_x) + 1*IIO_ICRB_OFFSET) |
| 409 |
#define IIO_ICRB_C(_x) (IIO_ICRB_A(_x) + 2*IIO_ICRB_OFFSET) |
| 410 |
#define IIO_ICRB_D(_x) (IIO_ICRB_A(_x) + 3*IIO_ICRB_OFFSET) |
| 411 |
|
| 412 |
/* XXX - IBUE register coming for Hub 2 */ |
| 413 |
|
| 414 |
/* |
| 415 |
* |
| 416 |
* CRB Register description. |
| 417 |
* |
| 418 |
* WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING |
| 419 |
* WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING |
| 420 |
* WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING |
| 421 |
* WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING |
| 422 |
* WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING |
| 423 |
* |
| 424 |
* Many of the fields in CRB are status bits used by hardware |
| 425 |
* for implementation of the protocol. It's very dangerous to |
| 426 |
* mess around with the CRB registers. |
| 427 |
* |
| 428 |
* It's OK to read the CRB registers and try to make sense out of the |
| 429 |
* fields in CRB. |
| 430 |
* |
| 431 |
* Updating CRB requires all activities in Hub IIO to be quiesced. |
| 432 |
* otherwise, a write to CRB could corrupt other CRB entries. |
| 433 |
* CRBs are here only as a back door peek to hub IIO's status. |
| 434 |
* Quiescing implies no dmas no PIOs |
| 435 |
* either directly from the cpu or from sn0net. |
| 436 |
* this is not something that can be done easily. So, AVOID updating |
| 437 |
* CRBs. |
| 438 |
*/ |
| 439 |
|
| 440 |
/* |
| 441 |
* Fields in CRB Register A |
| 442 |
*/ |
| 443 |
#ifndef __ASSEMBLER__ |
| 444 |
typedef union icrba_u { |
| 445 |
u64 reg_value; |
| 446 |
struct { |
| 447 |
u64 resvd: 6, |
| 448 |
stall_bte0: 1, /* Stall BTE 0 */ |
| 449 |
stall_bte1: 1, /* Stall BTE 1 */ |
| 450 |
error: 1, /* CRB has an error */ |
| 451 |
ecode: 3, /* Error Code */ |
| 452 |
lnetuce: 1, /* SN0net Uncorrectable error */ |
| 453 |
mark: 1, /* CRB Has been marked */ |
| 454 |
xerr: 1, /* Error bit set in xtalk header */ |
| 455 |
sidn: 4, /* SIDN field from xtalk */ |
| 456 |
tnum: 5, /* TNUM field in xtalk */ |
| 457 |
addr: 38, /* Address of request */ |
| 458 |
valid: 1, /* Valid status */ |
| 459 |
iow: 1; /* IO Write operation */ |
| 460 |
} icrba_fields_s; |
| 461 |
} icrba_t; |
| 462 |
|
| 463 |
/* This is an alternate typedef for the HUB1 CRB A in order to allow |
| 464 |
runtime selection of the format based on the REV_ID field of the |
| 465 |
NI_STATUS_REV_ID register. */ |
| 466 |
typedef union h1_icrba_u { |
| 467 |
u64 reg_value; |
| 468 |
|
| 469 |
struct { |
| 470 |
u64 resvd: 6, |
| 471 |
unused: 1, /* Unused but RW!! */ |
| 472 |
error: 1, /* CRB has an error */ |
| 473 |
ecode: 4, /* Error Code */ |
| 474 |
lnetuce: 1, /* SN0net Uncorrectable error */ |
| 475 |
mark: 1, /* CRB Has been marked */ |
| 476 |
xerr: 1, /* Error bit set in xtalk header */ |
| 477 |
sidn: 4, /* SIDN field from xtalk */ |
| 478 |
tnum: 5, /* TNUM field in xtalk */ |
| 479 |
addr: 38, /* Address of request */ |
| 480 |
valid: 1, /* Valid status */ |
| 481 |
iow: 1; /* IO Write operation */ |
| 482 |
} h1_icrba_fields_s; |
| 483 |
} h1_icrba_t; |
| 484 |
|
| 485 |
/* XXX - Is this still right? Check the spec. */ |
| 486 |
#define ICRBN_A_CERR_SHFT 54 |
| 487 |
#define ICRBN_A_ERR_MASK 0x3ff |
| 488 |
|
| 489 |
#endif /* !__ASSEMBLER__ */ |
| 490 |
|
| 491 |
#define IIO_ICRB_ADDR_SHFT 2 /* Shift to get proper address */ |
| 492 |
|
| 493 |
/* |
| 494 |
* values for "ecode" field |
| 495 |
*/ |
| 496 |
#define IIO_ICRB_ECODE_DERR 0 /* Directory error due to IIO access */ |
| 497 |
#define IIO_ICRB_ECODE_PERR 1 /* Poison error on IO access */ |
| 498 |
#define IIO_ICRB_ECODE_WERR 2 /* Write error by IIO access |
| 499 |
* e.g. WINV to a Read only line. |
| 500 |
*/ |
| 501 |
#define IIO_ICRB_ECODE_AERR 3 /* Access error caused by IIO access */ |
| 502 |
#define IIO_ICRB_ECODE_PWERR 4 /* Error on partial write */ |
| 503 |
#define IIO_ICRB_ECODE_PRERR 5 /* Error on partial read */ |
| 504 |
#define IIO_ICRB_ECODE_TOUT 6 /* CRB timeout before deallocating */ |
| 505 |
#define IIO_ICRB_ECODE_XTERR 7 /* Incoming xtalk pkt had error bit */ |
| 506 |
|
| 507 |
|
| 508 |
|
| 509 |
/* |
| 510 |
* Fields in CRB Register B |
| 511 |
*/ |
| 512 |
#ifndef __ASSEMBLER__ |
| 513 |
typedef union icrbb_u { |
| 514 |
u64 reg_value; |
| 515 |
struct { |
| 516 |
u64 rsvd1: 5, |
| 517 |
btenum: 1, /* BTE to which entry belongs to */ |
| 518 |
cohtrans: 1, /* Coherent transaction */ |
| 519 |
xtsize: 2, /* Xtalk operation size |
| 520 |
* 0: Double Word |
| 521 |
* 1: 32 Bytes. |
| 522 |
* 2: 128 Bytes, |
| 523 |
* 3: Reserved. |
| 524 |
*/ |
| 525 |
srcnode: 9, /* Source Node ID */ |
| 526 |
srcinit: 2, /* Source Initiator: |
| 527 |
* See below for field values. |
| 528 |
*/ |
| 529 |
useold: 1, /* Use OLD command for processing */ |
| 530 |
imsgtype: 2, /* Incoming message type |
| 531 |
* see below for field values |
| 532 |
*/ |
| 533 |
imsg: 8, /* Incoming message */ |
| 534 |
initator: 3, /* Initiator of original request |
| 535 |
* See below for field values. |
| 536 |
*/ |
| 537 |
reqtype: 5, /* Identifies type of request |
| 538 |
* See below for field values. |
| 539 |
*/ |
| 540 |
rsvd2: 7, |
| 541 |
ackcnt: 11, /* Invalidate ack count */ |
| 542 |
resp: 1, /* data response given to processor */ |
| 543 |
ack: 1, /* indicates data ack received */ |
| 544 |
hold: 1, /* entry is gathering inval acks */ |
| 545 |
wb_pend:1, /* waiting for writeback to complete */ |
| 546 |
intvn: 1, /* Intervention */ |
| 547 |
stall_ib: 1, /* Stall Ibuf (from crosstalk) */ |
| 548 |
stall_intr: 1; /* Stall internal interrupts */ |
| 549 |
} icrbb_field_s; |
| 550 |
} icrbb_t; |
| 551 |
|
| 552 |
/* This is an alternate typedef for the HUB1 CRB B in order to allow |
| 553 |
runtime selection of the format based on the REV_ID field of the |
| 554 |
NI_STATUS_REV_ID register. */ |
| 555 |
typedef union h1_icrbb_u { |
| 556 |
u64 reg_value; |
| 557 |
struct { |
| 558 |
u64 rsvd1: 5, |
| 559 |
btenum: 1, /* BTE to which entry belongs to */ |
| 560 |
cohtrans: 1, /* Coherent transaction */ |
| 561 |
xtsize: 2, /* Xtalk operation size |
| 562 |
* 0: Double Word |
| 563 |
* 1: 32 Bytes. |
| 564 |
* 2: 128 Bytes, |
| 565 |
* 3: Reserved. |
| 566 |
*/ |
| 567 |
srcnode: 9, /* Source Node ID */ |
| 568 |
srcinit: 2, /* Source Initiator: |
| 569 |
* See below for field values. |
| 570 |
*/ |
| 571 |
useold: 1, /* Use OLD command for processing */ |
| 572 |
imsgtype: 2, /* Incoming message type |
| 573 |
* see below for field values |
| 574 |
*/ |
| 575 |
imsg: 8, /* Incoming message */ |
| 576 |
initator: 3, /* Initiator of original request |
| 577 |
* See below for field values. |
| 578 |
*/ |
| 579 |
rsvd2: 1, |
| 580 |
pcache: 1, /* entry belongs to partial cache */ |
| 581 |
reqtype: 5, /* Identifies type of request |
| 582 |
* See below for field values. |
| 583 |
*/ |
| 584 |
stl_ib: 1, /* stall Ibus coming from xtalk */ |
| 585 |
stl_intr: 1, /* Stall internal interrupts */ |
| 586 |
stl_bte0: 1, /* Stall BTE 0 */ |
| 587 |
stl_bte1: 1, /* Stall BTE 1 */ |
| 588 |
intrvn: 1, /* Req was target of intervention */ |
| 589 |
ackcnt: 11, /* Invalidate ack count */ |
| 590 |
resp: 1, /* data response given to processor */ |
| 591 |
ack: 1, /* indicates data ack received */ |
| 592 |
hold: 1, /* entry is gathering inval acks */ |
| 593 |
wb_pend:1, /* waiting for writeback to complete */ |
| 594 |
sleep: 1, /* xtalk req sleeping till IO-sync */ |
| 595 |
pnd_reply: 1, /* replies not issed due to IOQ full */ |
| 596 |
pnd_req: 1; /* reqs not issued due to IOQ full */ |
| 597 |
} h1_icrbb_field_s; |
| 598 |
} h1_icrbb_t; |
| 599 |
|
| 600 |
|
| 601 |
#define b_imsgtype icrbb_field_s.imsgtype |
| 602 |
#define b_btenum icrbb_field_s.btenum |
| 603 |
#define b_cohtrans icrbb_field_s.cohtrans |
| 604 |
#define b_xtsize icrbb_field_s.xtsize |
| 605 |
#define b_srcnode icrbb_field_s.srcnode |
| 606 |
#define b_srcinit icrbb_field_s.srcinit |
| 607 |
#define b_imsgtype icrbb_field_s.imsgtype |
| 608 |
#define b_imsg icrbb_field_s.imsg |
| 609 |
#define b_initiator icrbb_field_s.initiator |
| 610 |
|
| 611 |
#endif /* !__ASSEMBLER__ */ |
| 612 |
|
| 613 |
/* |
| 614 |
* values for field xtsize |
| 615 |
*/ |
| 616 |
#define IIO_ICRB_XTSIZE_DW 0 /* Xtalk operation size is 8 bytes */ |
| 617 |
#define IIO_ICRB_XTSIZE_32 1 /* Xtalk operation size is 32 bytes */ |
| 618 |
#define IIO_ICRB_XTSIZE_128 2 /* Xtalk operation size is 128 bytes */ |
| 619 |
|
| 620 |
/* |
| 621 |
* values for field srcinit |
| 622 |
*/ |
| 623 |
#define IIO_ICRB_PROC0 0 /* Source of request is Proc 0 */ |
| 624 |
#define IIO_ICRB_PROC1 1 /* Source of request is Proc 1 */ |
| 625 |
#define IIO_ICRB_GB_REQ 2 /* Source is Guaranteed BW request */ |
| 626 |
#define IIO_ICRB_IO_REQ 3 /* Source is Normal IO request */ |
| 627 |
|
| 628 |
/* |
| 629 |
* Values for field imsgtype |
| 630 |
*/ |
| 631 |
#define IIO_ICRB_IMSGT_XTALK 0 /* Incoming Message from Xtalk */ |
| 632 |
#define IIO_ICRB_IMSGT_BTE 1 /* Incoming message from BTE */ |
| 633 |
#define IIO_ICRB_IMSGT_SN0NET 2 /* Incoming message from SN0 net */ |
| 634 |
#define IIO_ICRB_IMSGT_CRB 3 /* Incoming message from CRB ??? */ |
| 635 |
|
| 636 |
/* |
| 637 |
* values for field initiator. |
| 638 |
*/ |
| 639 |
#define IIO_ICRB_INIT_XTALK 0 /* Message originated in xtalk */ |
| 640 |
#define IIO_ICRB_INIT_BTE0 0x1 /* Message originated in BTE 0 */ |
| 641 |
#define IIO_ICRB_INIT_SN0NET 0x2 /* Message originated in SN0net */ |
| 642 |
#define IIO_ICRB_INIT_CRB 0x3 /* Message originated in CRB ? */ |
| 643 |
#define IIO_ICRB_INIT_BTE1 0x5 /* MEssage originated in BTE 1 */ |
| 644 |
|
| 645 |
/* |
| 646 |
* Values for field reqtype. |
| 647 |
*/ |
| 648 |
/* XXX - Need to fix this for Hub 2 */ |
| 649 |
#define IIO_ICRB_REQ_DWRD 0 /* Request type double word */ |
| 650 |
#define IIO_ICRB_REQ_QCLRD 1 /* Request is Qrtr Caceh line Rd */ |
| 651 |
#define IIO_ICRB_REQ_BLKRD 2 /* Request is block read */ |
| 652 |
#define IIO_ICRB_REQ_RSHU 6 /* Request is BTE block read */ |
| 653 |
#define IIO_ICRB_REQ_REXU 7 /* request is BTE Excl Read */ |
| 654 |
#define IIO_ICRB_REQ_RDEX 8 /* Request is Read Exclusive */ |
| 655 |
#define IIO_ICRB_REQ_WINC 9 /* Request is Write Invalidate */ |
| 656 |
#define IIO_ICRB_REQ_BWINV 10 /* Request is BTE Winv */ |
| 657 |
#define IIO_ICRB_REQ_PIORD 11 /* Request is PIO read */ |
| 658 |
#define IIO_ICRB_REQ_PIOWR 12 /* Request is PIO Write */ |
| 659 |
#define IIO_ICRB_REQ_PRDM 13 /* Request is Fetch&Op */ |
| 660 |
#define IIO_ICRB_REQ_PWRM 14 /* Request is Store &Op */ |
| 661 |
#define IIO_ICRB_REQ_PTPWR 15 /* Request is Peer to peer */ |
| 662 |
#define IIO_ICRB_REQ_WB 16 /* Request is Write back */ |
| 663 |
#define IIO_ICRB_REQ_DEX 17 /* Retained DEX Cache line */ |
| 664 |
|
| 665 |
/* |
| 666 |
* Fields in CRB Register C |
| 667 |
*/ |
| 668 |
|
| 669 |
#ifndef __ASSEMBLER__ |
| 670 |
|
| 671 |
typedef union icrbc_s { |
| 672 |
u64 reg_value; |
| 673 |
struct { |
| 674 |
u64 rsvd: 6, |
| 675 |
sleep: 1, |
| 676 |
pricnt: 4, /* Priority count sent with Read req */ |
| 677 |
pripsc: 4, /* Priority Pre scalar */ |
| 678 |
bteop: 1, /* BTE Operation */ |
| 679 |
push_be: 34, /* Push address Byte enable |
| 680 |
* Holds push addr, if CRB is for BTE |
| 681 |
* If CRB belongs to Partial cache, |
| 682 |
* this contains byte enables bits |
| 683 |
* ([47:46] = 0) |
| 684 |
*/ |
| 685 |
suppl: 11, /* Supplemental field */ |
| 686 |
barrop: 1, /* Barrier Op bit set in xtalk req */ |
| 687 |
doresp: 1, /* Xtalk req needs a response */ |
| 688 |
gbr: 1; /* GBR bit set in xtalk packet */ |
| 689 |
} icrbc_field_s; |
| 690 |
} icrbc_t; |
| 691 |
|
| 692 |
#define c_pricnt icrbc_field_s.pricnt |
| 693 |
#define c_pripsc icrbc_field_s.pripsc |
| 694 |
#define c_bteop icrbc_field_s.bteop |
| 695 |
#define c_bteaddr icrbc_field_s.push_be /* push_be field has 2 names */ |
| 696 |
#define c_benable icrbc_field_s.push_be /* push_be field has 2 names */ |
| 697 |
#define c_suppl icrbc_field_s.suppl |
| 698 |
#define c_barrop icrbc_field_s.barrop |
| 699 |
#define c_doresp icrbc_field_s.doresp |
| 700 |
#define c_gbr icrbc_field_s.gbr |
| 701 |
#endif /* !__ASSEMBLER__ */ |
| 702 |
|
| 703 |
/* |
| 704 |
* Fields in CRB Register D |
| 705 |
*/ |
| 706 |
|
| 707 |
#ifndef __ASSEMBLER__ |
| 708 |
typedef union icrbd_s { |
| 709 |
u64 reg_value; |
| 710 |
struct { |
| 711 |
u64 rsvd: 38, |
| 712 |
toutvld: 1, /* Timeout in progress for this CRB */ |
| 713 |
ctxtvld: 1, /* Context field below is valid */ |
| 714 |
rsvd2: 1, |
| 715 |
context: 15, /* Bit vector: |
| 716 |
* Has a bit set for each CRB entry |
| 717 |
* which needs to be deallocated |
| 718 |
* before this CRB entry is processed. |
| 719 |
* Set only for barrier operations. |
| 720 |
*/ |
| 721 |
timeout: 8; /* Timeout Upper 8 bits */ |
| 722 |
} icrbd_field_s; |
| 723 |
} icrbd_t; |
| 724 |
|
| 725 |
#define icrbd_toutvld icrbd_field_s.toutvld |
| 726 |
#define icrbd_ctxtvld icrbd_field_s.ctxtvld |
| 727 |
#define icrbd_context icrbd_field_s.context |
| 728 |
|
| 729 |
|
| 730 |
typedef union hubii_ifdr_u { |
| 731 |
u64 hi_ifdr_value; |
| 732 |
struct { |
| 733 |
u64 ifdr_rsvd: 49, |
| 734 |
ifdr_maxrp: 7, |
| 735 |
ifdr_rsvd1: 1, |
| 736 |
ifdr_maxrq: 7; |
| 737 |
} hi_ifdr_fields; |
| 738 |
} hubii_ifdr_t; |
| 739 |
|
| 740 |
#endif /* !__ASSEMBLER__ */ |
| 741 |
|
| 742 |
/* |
| 743 |
* Hardware designed names for the BTE control registers. |
| 744 |
*/ |
| 745 |
#define IIO_IBLS_0 0x410000 /* BTE length/status 0 */ |
| 746 |
#define IIO_IBSA_0 0x410008 /* BTE source address 0 */ |
| 747 |
#define IIO_IBDA_0 0x410010 /* BTE destination address 0 */ |
| 748 |
#define IIO_IBCT_0 0x410018 /* BTE control/terminate 0 */ |
| 749 |
#define IIO_IBNA_0 0x410020 /* BTE notification address 0 */ |
| 750 |
#define IIO_IBNR_0 IIO_IBNA_0 |
| 751 |
#define IIO_IBIA_0 0x410028 /* BTE interrupt address 0 */ |
| 752 |
|
| 753 |
#define IIO_IBLS_1 0x420000 /* BTE length/status 1 */ |
| 754 |
#define IIO_IBSA_1 0x420008 /* BTE source address 1 */ |
| 755 |
#define IIO_IBDA_1 0x420010 /* BTE destination address 1 */ |
| 756 |
#define IIO_IBCT_1 0x420018 /* BTE control/terminate 1 */ |
| 757 |
#define IIO_IBNA_1 0x420020 /* BTE notification address 1 */ |
| 758 |
#define IIO_IBNR_1 IIO_IBNA_1 |
| 759 |
#define IIO_IBIA_1 0x420028 /* BTE interrupt address 1 */ |
| 760 |
|
| 761 |
/* |
| 762 |
* More miscellaneous registers |
| 763 |
*/ |
| 764 |
#define IIO_IPCR 0x430000 /* Performance Control */ |
| 765 |
#define IIO_IPPR 0x430008 /* Performance Profiling */ |
| 766 |
|
| 767 |
/* |
| 768 |
* IO Error Clear register bit field definitions |
| 769 |
*/ |
| 770 |
#define IECLR_BTE1 (1 << 18) /* clear bte error 1 ??? */ |
| 771 |
#define IECLR_BTE0 (1 << 17) /* clear bte error 0 ??? */ |
| 772 |
#define IECLR_CRAZY (1 << 16) /* clear crazy bit in wstat reg */ |
| 773 |
#define IECLR_PRB_F (1 << 15) /* clear err bit in PRB_F reg */ |
| 774 |
#define IECLR_PRB_E (1 << 14) /* clear err bit in PRB_E reg */ |
| 775 |
#define IECLR_PRB_D (1 << 13) /* clear err bit in PRB_D reg */ |
| 776 |
#define IECLR_PRB_C (1 << 12) /* clear err bit in PRB_C reg */ |
| 777 |
#define IECLR_PRB_B (1 << 11) /* clear err bit in PRB_B reg */ |
| 778 |
#define IECLR_PRB_A (1 << 10) /* clear err bit in PRB_A reg */ |
| 779 |
#define IECLR_PRB_9 (1 << 9) /* clear err bit in PRB_9 reg */ |
| 780 |
#define IECLR_PRB_8 (1 << 8) /* clear err bit in PRB_8 reg */ |
| 781 |
#define IECLR_PRB_0 (1 << 0) /* clear err bit in PRB_0 reg */ |
| 782 |
|
| 783 |
/* |
| 784 |
* IO PIO Read Table Entry format |
| 785 |
*/ |
| 786 |
|
| 787 |
#ifndef __ASSEMBLER__ |
| 788 |
|
| 789 |
typedef union iprte_a { |
| 790 |
u64 entry; |
| 791 |
struct { |
| 792 |
u64 rsvd1 : 7, /* Reserved field */ |
| 793 |
valid : 1, /* Maps to a timeout entry */ |
| 794 |
rsvd2 : 1, |
| 795 |
srcnode : 9, /* Node which did this PIO */ |
| 796 |
initiator : 2, /* If T5A or T5B or IO */ |
| 797 |
rsvd3 : 3, |
| 798 |
addr : 38, /* Physical address of PIO */ |
| 799 |
rsvd4 : 3; |
| 800 |
} iprte_fields; |
| 801 |
} iprte_a_t; |
| 802 |
|
| 803 |
#define iprte_valid iprte_fields.valid |
| 804 |
#define iprte_timeout iprte_fields.timeout |
| 805 |
#define iprte_srcnode iprte_fields.srcnode |
| 806 |
#define iprte_init iprte_fields.initiator |
| 807 |
#define iprte_addr iprte_fields.addr |
| 808 |
|
| 809 |
#endif /* !__ASSEMBLER__ */ |
| 810 |
|
| 811 |
#define IPRTE_ADDRSHFT 3 |
| 812 |
|
| 813 |
/* |
| 814 |
* Hub IIO PRB Register format. |
| 815 |
*/ |
| 816 |
|
| 817 |
#ifndef __ASSEMBLER__ |
| 818 |
/* |
| 819 |
* Note: Fields bnakctr, anakctr, xtalkctrmode, ovflow fields are |
| 820 |
* "Status" fields, and should only be used in case of clean up after errors. |
| 821 |
*/ |
| 822 |
|
| 823 |
typedef union iprb_u { |
| 824 |
u64 reg_value; |
| 825 |
struct { |
| 826 |
u64 rsvd1: 15, |
| 827 |
error: 1, /* Widget rcvd wr resp pkt w/ error */ |
| 828 |
ovflow: 5, /* Overflow count. perf measurement */ |
| 829 |
fire_and_forget: 1, /* Launch Write without response */ |
| 830 |
mode: 2, /* Widget operation Mode */ |
| 831 |
rsvd2: 2, |
| 832 |
bnakctr: 14, |
| 833 |
rsvd3: 2, |
| 834 |
anakctr: 14, |
| 835 |
xtalkctr: 8; |
| 836 |
} iprb_fields_s; |
| 837 |
} iprb_t; |
| 838 |
|
| 839 |
#define iprb_regval reg_value |
| 840 |
|
| 841 |
#define iprb_error iprb_fields_s.error |
| 842 |
#define iprb_ovflow iprb_fields_s.ovflow |
| 843 |
#define iprb_ff iprb_fields_s.fire_and_forget |
| 844 |
#define iprb_mode iprb_fields_s.mode |
| 845 |
#define iprb_bnakctr iprb_fields_s.bnakctr |
| 846 |
#define iprb_anakctr iprb_fields_s.anakctr |
| 847 |
#define iprb_xtalkctr iprb_fields_s.xtalkctr |
| 848 |
|
| 849 |
#endif /* !__ASSEMBLER__ */ |
| 850 |
|
| 851 |
/* |
| 852 |
* values for mode field in iprb_t. |
| 853 |
* For details of the meanings of NAK and Accept, refer the PIO flow |
| 854 |
* document |
| 855 |
*/ |
| 856 |
#define IPRB_MODE_NORMAL (0) |
| 857 |
#define IPRB_MODE_COLLECT_A (1) /* PRB in collect A mode */ |
| 858 |
#define IPRB_MODE_SERVICE_A (2) /* NAK B and Accept A */ |
| 859 |
#define IPRB_MODE_SERVICE_B (3) /* NAK A and Accept B */ |
| 860 |
|
| 861 |
/* |
| 862 |
* IO CRB entry C_A to E_A : Partial (cache) CRBS |
| 863 |
*/ |
| 864 |
#ifndef __ASSEMBLER__ |
| 865 |
typedef union icrbp_a { |
| 866 |
u64 ip_reg; /* the entire register value */ |
| 867 |
struct { |
| 868 |
u64 error: 1, /* 63, error occurred */ |
| 869 |
ln_uce: 1, /* 62: uncorrectable memory */ |
| 870 |
ln_ae: 1, /* 61: protection violation */ |
| 871 |
ln_werr:1, /* 60: write access error */ |
| 872 |
ln_aerr:1, /* 59: sn0net: Address error */ |
| 873 |
ln_perr:1, /* 58: sn0net: poison error */ |
| 874 |
timeout:1, /* 57: CRB timed out */ |
| 875 |
l_bdpkt:1, /* 56: truncated pkt on sn0net */ |
| 876 |
c_bdpkt:1, /* 55: truncated pkt on xtalk */ |
| 877 |
c_err: 1, /* 54: incoming xtalk req, err set*/ |
| 878 |
rsvd1: 12, /* 53-42: reserved */ |
| 879 |
valid: 1, /* 41: Valid status */ |
| 880 |
sidn: 4, /* 40-37: SIDN field of xtalk rqst */ |
| 881 |
tnum: 5, /* 36-32: TNUM of xtalk request */ |
| 882 |
bo: 1, /* 31: barrier op set in xtalk rqst*/ |
| 883 |
resprqd:1, /* 30: xtalk rqst requires response*/ |
| 884 |
gbr: 1, /* 29: gbr bit set in xtalk rqst */ |
| 885 |
size: 2, /* 28-27: size of xtalk request */ |
| 886 |
excl: 4, /* 26-23: exclusive bit(s) */ |
| 887 |
stall: 3, /* 22-20: stall (xtalk, bte 0/1) */ |
| 888 |
intvn: 1, /* 19: rqst target of intervention*/ |
| 889 |
resp: 1, /* 18: Data response given to t5 */ |
| 890 |
ack: 1, /* 17: Data ack received. */ |
| 891 |
hold: 1, /* 16: crb gathering invalidate acks*/ |
| 892 |
wb: 1, /* 15: writeback pending. */ |
| 893 |
ack_cnt:11, /* 14-04: counter of invalidate acks*/ |
| 894 |
tscaler:4; /* 03-00: Timeout prescaler */ |
| 895 |
} ip_fmt; |
| 896 |
} icrbp_a_t; |
| 897 |
|
| 898 |
#endif /* !__ASSEMBLER__ */ |
| 899 |
|
| 900 |
/* |
| 901 |
* A couple of defines to go with the above structure. |
| 902 |
*/ |
| 903 |
#define ICRBP_A_CERR_SHFT 54 |
| 904 |
#define ICRBP_A_ERR_MASK 0x3ff |
| 905 |
|
| 906 |
#ifndef __ASSEMBLER__ |
| 907 |
typedef union hubii_idsr { |
| 908 |
u64 iin_reg; |
| 909 |
struct { |
| 910 |
u64 rsvd1 : 35, |
| 911 |
isent : 1, |
| 912 |
rsvd2 : 3, |
| 913 |
ienable: 1, |
| 914 |
rsvd : 7, |
| 915 |
node : 9, |
| 916 |
rsvd4 : 1, |
| 917 |
level : 7; |
| 918 |
} iin_fmt; |
| 919 |
} hubii_idsr_t; |
| 920 |
#endif /* !__ASSEMBLER__ */ |
| 921 |
|
| 922 |
/* |
| 923 |
* IO BTE Length/Status (IIO_IBLS) register bit field definitions |
| 924 |
*/ |
| 925 |
#define IBLS_BUSY (0x1 << 20) |
| 926 |
#define IBLS_ERROR_SHFT 16 |
| 927 |
#define IBLS_ERROR (0x1 << IBLS_ERROR_SHFT) |
| 928 |
#define IBLS_LENGTH_MASK 0xffff |
| 929 |
|
| 930 |
/* |
| 931 |
* IO BTE Control/Terminate register (IBCT) register bit field definitions |
| 932 |
*/ |
| 933 |
#define IBCT_POISON (0x1 << 8) |
| 934 |
#define IBCT_NOTIFY (0x1 << 4) |
| 935 |
#define IBCT_ZFIL_MODE (0x1 << 0) |
| 936 |
|
| 937 |
/* |
| 938 |
* IO BTE Interrupt Address Register (IBIA) register bit field definitions |
| 939 |
*/ |
| 940 |
#define IBIA_LEVEL_SHFT 16 |
| 941 |
#define IBIA_LEVEL_MASK (0x7f << IBIA_LEVEL_SHFT) |
| 942 |
#define IBIA_NODE_ID_SHFT 0 |
| 943 |
#define IBIA_NODE_ID_MASK (0x1ff) |
| 944 |
|
| 945 |
/* |
| 946 |
* Miscellaneous hub constants |
| 947 |
*/ |
| 948 |
|
| 949 |
/* Number of widgets supported by hub */ |
| 950 |
#define HUB_NUM_WIDGET 9 |
| 951 |
#define HUB_WIDGET_ID_MIN 0x8 |
| 952 |
#define HUB_WIDGET_ID_MAX 0xf |
| 953 |
|
| 954 |
#define HUB_WIDGET_PART_NUM 0xc101 |
| 955 |
#define MAX_HUBS_PER_XBOW 2 |
| 956 |
|
| 957 |
/* |
| 958 |
* Get a hub's widget id from widget control register |
| 959 |
*/ |
| 960 |
#define IIO_WCR_WID_GET(nasid) (REMOTE_HUB_L(nasid, III_WCR) & 0xf) |
| 961 |
#define IIO_WST_ERROR_MASK (UINT64_CAST 1 << 32) /* Widget status error */ |
| 962 |
|
| 963 |
/* |
| 964 |
* Number of credits Hub widget has while sending req/response to |
| 965 |
* xbow. |
| 966 |
* Value of 3 is required by Xbow 1.1 |
| 967 |
* We may be able to increase this to 4 with Xbow 1.2. |
| 968 |
*/ |
| 969 |
#define HUBII_XBOW_CREDIT 3 |
| 970 |
#define HUBII_XBOW_REV2_CREDIT 4 |
| 971 |
|
| 972 |
#endif /* _ASM_SGI_SN_SN0_HUBIO_H */ |