| 1 |
/* SPDX-License-Identifier: GPL-2.0 */ |
| 2 |
/* |
| 3 |
* Copyright (C) 1999, 2000 Ralf Baechle |
| 4 |
* Copyright (C) 1999, 2000 Silicon Graphics, Inc. |
| 5 |
*/ |
| 6 |
#ifndef MIPS_SN_IOC3_H |
| 7 |
#define MIPS_SN_IOC3_H |
| 8 |
|
| 9 |
#include <linux/types.h> |
| 10 |
|
| 11 |
/* serial port register map */ |
| 12 |
struct ioc3_serialregs { |
| 13 |
u32 sscr; |
| 14 |
u32 stpir; |
| 15 |
u32 stcir; |
| 16 |
u32 srpir; |
| 17 |
u32 srcir; |
| 18 |
u32 srtr; |
| 19 |
u32 shadow; |
| 20 |
}; |
| 21 |
|
| 22 |
/* SUPERIO uart register map */ |
| 23 |
struct ioc3_uartregs { |
| 24 |
u8 iu_lcr; |
| 25 |
union { |
| 26 |
u8 iu_iir; /* read only */ |
| 27 |
u8 iu_fcr; /* write only */ |
| 28 |
}; |
| 29 |
union { |
| 30 |
u8 iu_ier; /* DLAB == 0 */ |
| 31 |
u8 iu_dlm; /* DLAB == 1 */ |
| 32 |
}; |
| 33 |
union { |
| 34 |
u8 iu_rbr; /* read only, DLAB == 0 */ |
| 35 |
u8 iu_thr; /* write only, DLAB == 0 */ |
| 36 |
u8 iu_dll; /* DLAB == 1 */ |
| 37 |
}; |
| 38 |
u8 iu_scr; |
| 39 |
u8 iu_msr; |
| 40 |
u8 iu_lsr; |
| 41 |
u8 iu_mcr; |
| 42 |
}; |
| 43 |
|
| 44 |
struct ioc3_sioregs { |
| 45 |
u8 fill[0x141]; /* starts at 0x141 */ |
| 46 |
|
| 47 |
u8 kbdcg; |
| 48 |
u8 uartc; |
| 49 |
|
| 50 |
u8 fill0[0x151 - 0x142 - 1]; |
| 51 |
|
| 52 |
u8 pp_dcr; |
| 53 |
u8 pp_dsr; |
| 54 |
u8 pp_data; |
| 55 |
|
| 56 |
u8 fill1[0x159 - 0x153 - 1]; |
| 57 |
|
| 58 |
u8 pp_ecr; |
| 59 |
u8 pp_cfgb; |
| 60 |
u8 pp_fifa; |
| 61 |
|
| 62 |
u8 fill2[0x16a - 0x15b - 1]; |
| 63 |
|
| 64 |
u8 rtcdat; |
| 65 |
u8 rtcad; |
| 66 |
|
| 67 |
u8 fill3[0x170 - 0x16b - 1]; |
| 68 |
|
| 69 |
struct ioc3_uartregs uartb; /* 0x20170 */ |
| 70 |
struct ioc3_uartregs uarta; /* 0x20178 */ |
| 71 |
}; |
| 72 |
|
| 73 |
struct ioc3_ethregs { |
| 74 |
u32 emcr; /* 0x000f0 */ |
| 75 |
u32 eisr; /* 0x000f4 */ |
| 76 |
u32 eier; /* 0x000f8 */ |
| 77 |
u32 ercsr; /* 0x000fc */ |
| 78 |
u32 erbr_h; /* 0x00100 */ |
| 79 |
u32 erbr_l; /* 0x00104 */ |
| 80 |
u32 erbar; /* 0x00108 */ |
| 81 |
u32 ercir; /* 0x0010c */ |
| 82 |
u32 erpir; /* 0x00110 */ |
| 83 |
u32 ertr; /* 0x00114 */ |
| 84 |
u32 etcsr; /* 0x00118 */ |
| 85 |
u32 ersr; /* 0x0011c */ |
| 86 |
u32 etcdc; /* 0x00120 */ |
| 87 |
u32 ebir; /* 0x00124 */ |
| 88 |
u32 etbr_h; /* 0x00128 */ |
| 89 |
u32 etbr_l; /* 0x0012c */ |
| 90 |
u32 etcir; /* 0x00130 */ |
| 91 |
u32 etpir; /* 0x00134 */ |
| 92 |
u32 emar_h; /* 0x00138 */ |
| 93 |
u32 emar_l; /* 0x0013c */ |
| 94 |
u32 ehar_h; /* 0x00140 */ |
| 95 |
u32 ehar_l; /* 0x00144 */ |
| 96 |
u32 micr; /* 0x00148 */ |
| 97 |
u32 midr_r; /* 0x0014c */ |
| 98 |
u32 midr_w; /* 0x00150 */ |
| 99 |
}; |
| 100 |
|
| 101 |
struct ioc3_serioregs { |
| 102 |
u32 km_csr; /* 0x0009c */ |
| 103 |
u32 k_rd; /* 0x000a0 */ |
| 104 |
u32 m_rd; /* 0x000a4 */ |
| 105 |
u32 k_wd; /* 0x000a8 */ |
| 106 |
u32 m_wd; /* 0x000ac */ |
| 107 |
}; |
| 108 |
|
| 109 |
/* Register layout of IOC3 in configuration space. */ |
| 110 |
struct ioc3 { |
| 111 |
/* PCI Config Space registers */ |
| 112 |
u32 pci_id; /* 0x00000 */ |
| 113 |
u32 pci_scr; /* 0x00004 */ |
| 114 |
u32 pci_rev; /* 0x00008 */ |
| 115 |
u32 pci_lat; /* 0x0000c */ |
| 116 |
u32 pci_addr; /* 0x00010 */ |
| 117 |
u32 pci_err_addr_l; /* 0x00014 */ |
| 118 |
u32 pci_err_addr_h; /* 0x00018 */ |
| 119 |
|
| 120 |
u32 sio_ir; /* 0x0001c */ |
| 121 |
u32 sio_ies; /* 0x00020 */ |
| 122 |
u32 sio_iec; /* 0x00024 */ |
| 123 |
u32 sio_cr; /* 0x00028 */ |
| 124 |
u32 int_out; /* 0x0002c */ |
| 125 |
u32 mcr; /* 0x00030 */ |
| 126 |
|
| 127 |
/* General Purpose I/O registers */ |
| 128 |
u32 gpcr_s; /* 0x00034 */ |
| 129 |
u32 gpcr_c; /* 0x00038 */ |
| 130 |
u32 gpdr; /* 0x0003c */ |
| 131 |
u32 gppr[16]; /* 0x00040 */ |
| 132 |
|
| 133 |
/* Parallel Port Registers */ |
| 134 |
u32 ppbr_h_a; /* 0x00080 */ |
| 135 |
u32 ppbr_l_a; /* 0x00084 */ |
| 136 |
u32 ppcr_a; /* 0x00088 */ |
| 137 |
u32 ppcr; /* 0x0008c */ |
| 138 |
u32 ppbr_h_b; /* 0x00090 */ |
| 139 |
u32 ppbr_l_b; /* 0x00094 */ |
| 140 |
u32 ppcr_b; /* 0x00098 */ |
| 141 |
|
| 142 |
/* Keyboard and Mouse Registers */ |
| 143 |
struct ioc3_serioregs serio; |
| 144 |
|
| 145 |
/* Serial Port Registers */ |
| 146 |
u32 sbbr_h; /* 0x000b0 */ |
| 147 |
u32 sbbr_l; /* 0x000b4 */ |
| 148 |
struct ioc3_serialregs port_a; |
| 149 |
struct ioc3_serialregs port_b; |
| 150 |
|
| 151 |
/* Ethernet Registers */ |
| 152 |
struct ioc3_ethregs eth; |
| 153 |
u32 pad1[(0x20000 - 0x00154) / 4]; |
| 154 |
|
| 155 |
/* SuperIO Registers XXX */ |
| 156 |
struct ioc3_sioregs sregs; /* 0x20000 */ |
| 157 |
u32 pad2[(0x40000 - 0x20180) / 4]; |
| 158 |
|
| 159 |
/* SSRAM Diagnostic Access */ |
| 160 |
u32 ssram[(0x80000 - 0x40000) / 4]; |
| 161 |
|
| 162 |
/* Bytebus device offsets |
| 163 |
0x80000 - Access to the generic devices selected with DEV0 |
| 164 |
0x9FFFF bytebus DEV_SEL_0 |
| 165 |
0xA0000 - Access to the generic devices selected with DEV1 |
| 166 |
0xBFFFF bytebus DEV_SEL_1 |
| 167 |
0xC0000 - Access to the generic devices selected with DEV2 |
| 168 |
0xDFFFF bytebus DEV_SEL_2 |
| 169 |
0xE0000 - Access to the generic devices selected with DEV3 |
| 170 |
0xFFFFF bytebus DEV_SEL_3 */ |
| 171 |
}; |
| 172 |
|
| 173 |
|
| 174 |
#define PCI_LAT 0xc /* Latency Timer */ |
| 175 |
#define PCI_SCR_DROP_MODE_EN 0x00008000 /* drop pios on parity err */ |
| 176 |
#define UARTA_BASE 0x178 |
| 177 |
#define UARTB_BASE 0x170 |
| 178 |
|
| 179 |
/* |
| 180 |
* Bytebus device space |
| 181 |
*/ |
| 182 |
#define IOC3_BYTEBUS_DEV0 0x80000L |
| 183 |
#define IOC3_BYTEBUS_DEV1 0xa0000L |
| 184 |
#define IOC3_BYTEBUS_DEV2 0xc0000L |
| 185 |
#define IOC3_BYTEBUS_DEV3 0xe0000L |
| 186 |
|
| 187 |
/* |
| 188 |
* Ethernet RX Buffer |
| 189 |
*/ |
| 190 |
struct ioc3_erxbuf { |
| 191 |
u32 w0; /* first word (valid,bcnt,cksum) */ |
| 192 |
u32 err; /* second word various errors */ |
| 193 |
/* next comes n bytes of padding */ |
| 194 |
/* then the received ethernet frame itself */ |
| 195 |
}; |
| 196 |
|
| 197 |
#define ERXBUF_IPCKSUM_MASK 0x0000ffff |
| 198 |
#define ERXBUF_BYTECNT_MASK 0x07ff0000 |
| 199 |
#define ERXBUF_BYTECNT_SHIFT 16 |
| 200 |
#define ERXBUF_V 0x80000000 |
| 201 |
|
| 202 |
#define ERXBUF_CRCERR 0x00000001 /* aka RSV15 */ |
| 203 |
#define ERXBUF_FRAMERR 0x00000002 /* aka RSV14 */ |
| 204 |
#define ERXBUF_CODERR 0x00000004 /* aka RSV13 */ |
| 205 |
#define ERXBUF_INVPREAMB 0x00000008 /* aka RSV18 */ |
| 206 |
#define ERXBUF_LOLEN 0x00007000 /* aka RSV2_0 */ |
| 207 |
#define ERXBUF_HILEN 0x03ff0000 /* aka RSV12_3 */ |
| 208 |
#define ERXBUF_MULTICAST 0x04000000 /* aka RSV16 */ |
| 209 |
#define ERXBUF_BROADCAST 0x08000000 /* aka RSV17 */ |
| 210 |
#define ERXBUF_LONGEVENT 0x10000000 /* aka RSV19 */ |
| 211 |
#define ERXBUF_BADPKT 0x20000000 /* aka RSV20 */ |
| 212 |
#define ERXBUF_GOODPKT 0x40000000 /* aka RSV21 */ |
| 213 |
#define ERXBUF_CARRIER 0x80000000 /* aka RSV22 */ |
| 214 |
|
| 215 |
/* |
| 216 |
* Ethernet TX Descriptor |
| 217 |
*/ |
| 218 |
#define ETXD_DATALEN 104 |
| 219 |
struct ioc3_etxd { |
| 220 |
u32 cmd; /* command field */ |
| 221 |
u32 bufcnt; /* buffer counts field */ |
| 222 |
u64 p1; /* buffer pointer 1 */ |
| 223 |
u64 p2; /* buffer pointer 2 */ |
| 224 |
u8 data[ETXD_DATALEN]; /* opt. tx data */ |
| 225 |
}; |
| 226 |
|
| 227 |
#define ETXD_BYTECNT_MASK 0x000007ff /* total byte count */ |
| 228 |
#define ETXD_INTWHENDONE 0x00001000 /* intr when done */ |
| 229 |
#define ETXD_D0V 0x00010000 /* data 0 valid */ |
| 230 |
#define ETXD_B1V 0x00020000 /* buf 1 valid */ |
| 231 |
#define ETXD_B2V 0x00040000 /* buf 2 valid */ |
| 232 |
#define ETXD_DOCHECKSUM 0x00080000 /* insert ip cksum */ |
| 233 |
#define ETXD_CHKOFF_MASK 0x07f00000 /* cksum byte offset */ |
| 234 |
#define ETXD_CHKOFF_SHIFT 20 |
| 235 |
|
| 236 |
#define ETXD_D0CNT_MASK 0x0000007f |
| 237 |
#define ETXD_B1CNT_MASK 0x0007ff00 |
| 238 |
#define ETXD_B1CNT_SHIFT 8 |
| 239 |
#define ETXD_B2CNT_MASK 0x7ff00000 |
| 240 |
#define ETXD_B2CNT_SHIFT 20 |
| 241 |
|
| 242 |
/* ------------------------------------------------------------------------- */ |
| 243 |
|
| 244 |
/* Superio Registers (PIO Access) */ |
| 245 |
#define IOC3_SIO_BASE 0x20000 |
| 246 |
#define IOC3_SIO_UARTC (IOC3_SIO_BASE+0x141) /* UART Config */ |
| 247 |
#define IOC3_SIO_KBDCG (IOC3_SIO_BASE+0x142) /* KBD Config */ |
| 248 |
#define IOC3_SIO_PP_BASE (IOC3_SIO_BASE+PP_BASE) /* Parallel Port */ |
| 249 |
#define IOC3_SIO_RTC_BASE (IOC3_SIO_BASE+0x168) /* Real Time Clock */ |
| 250 |
#define IOC3_SIO_UB_BASE (IOC3_SIO_BASE+UARTB_BASE) /* UART B */ |
| 251 |
#define IOC3_SIO_UA_BASE (IOC3_SIO_BASE+UARTA_BASE) /* UART A */ |
| 252 |
|
| 253 |
/* SSRAM Diagnostic Access */ |
| 254 |
#define IOC3_SSRAM IOC3_RAM_OFF /* base of SSRAM diagnostic access */ |
| 255 |
#define IOC3_SSRAM_LEN 0x40000 /* 256kb (addrspc sz, may not be populated) */ |
| 256 |
#define IOC3_SSRAM_DM 0x0000ffff /* data mask */ |
| 257 |
#define IOC3_SSRAM_PM 0x00010000 /* parity mask */ |
| 258 |
|
| 259 |
/* bitmasks for PCI_SCR */ |
| 260 |
#define PCI_SCR_PAR_RESP_EN 0x00000040 /* enb PCI parity checking */ |
| 261 |
#define PCI_SCR_SERR_EN 0x00000100 /* enable the SERR# driver */ |
| 262 |
#define PCI_SCR_DROP_MODE_EN 0x00008000 /* drop pios on parity err */ |
| 263 |
#define PCI_SCR_RX_SERR (0x1 << 16) |
| 264 |
#define PCI_SCR_DROP_MODE (0x1 << 17) |
| 265 |
#define PCI_SCR_SIG_PAR_ERR (0x1 << 24) |
| 266 |
#define PCI_SCR_SIG_TAR_ABRT (0x1 << 27) |
| 267 |
#define PCI_SCR_RX_TAR_ABRT (0x1 << 28) |
| 268 |
#define PCI_SCR_SIG_MST_ABRT (0x1 << 29) |
| 269 |
#define PCI_SCR_SIG_SERR (0x1 << 30) |
| 270 |
#define PCI_SCR_PAR_ERR (0x1 << 31) |
| 271 |
|
| 272 |
/* bitmasks for IOC3_KM_CSR */ |
| 273 |
#define KM_CSR_K_WRT_PEND 0x00000001 /* kbd port xmitting or resetting */ |
| 274 |
#define KM_CSR_M_WRT_PEND 0x00000002 /* mouse port xmitting or resetting */ |
| 275 |
#define KM_CSR_K_LCB 0x00000004 /* Line Cntrl Bit for last KBD write */ |
| 276 |
#define KM_CSR_M_LCB 0x00000008 /* same for mouse */ |
| 277 |
#define KM_CSR_K_DATA 0x00000010 /* state of kbd data line */ |
| 278 |
#define KM_CSR_K_CLK 0x00000020 /* state of kbd clock line */ |
| 279 |
#define KM_CSR_K_PULL_DATA 0x00000040 /* pull kbd data line low */ |
| 280 |
#define KM_CSR_K_PULL_CLK 0x00000080 /* pull kbd clock line low */ |
| 281 |
#define KM_CSR_M_DATA 0x00000100 /* state of ms data line */ |
| 282 |
#define KM_CSR_M_CLK 0x00000200 /* state of ms clock line */ |
| 283 |
#define KM_CSR_M_PULL_DATA 0x00000400 /* pull ms data line low */ |
| 284 |
#define KM_CSR_M_PULL_CLK 0x00000800 /* pull ms clock line low */ |
| 285 |
#define KM_CSR_EMM_MODE 0x00001000 /* emulation mode */ |
| 286 |
#define KM_CSR_SIM_MODE 0x00002000 /* clock X8 */ |
| 287 |
#define KM_CSR_K_SM_IDLE 0x00004000 /* Keyboard is idle */ |
| 288 |
#define KM_CSR_M_SM_IDLE 0x00008000 /* Mouse is idle */ |
| 289 |
#define KM_CSR_K_TO 0x00010000 /* Keyboard trying to send/receive */ |
| 290 |
#define KM_CSR_M_TO 0x00020000 /* Mouse trying to send/receive */ |
| 291 |
#define KM_CSR_K_TO_EN 0x00040000 /* KM_CSR_K_TO + KM_CSR_K_TO_EN = cause |
| 292 |
SIO_IR to assert */ |
| 293 |
#define KM_CSR_M_TO_EN 0x00080000 /* KM_CSR_M_TO + KM_CSR_M_TO_EN = cause |
| 294 |
SIO_IR to assert */ |
| 295 |
#define KM_CSR_K_CLAMP_1 0x00100000 /* Pull K_CLK low aft recv 1 char */ |
| 296 |
#define KM_CSR_M_CLAMP_1 0x00200000 /* Pull M_CLK low aft recv 1 char */ |
| 297 |
#define KM_CSR_K_CLAMP_3 0x00400000 /* Pull K_CLK low aft recv 3 chars */ |
| 298 |
#define KM_CSR_M_CLAMP_3 0x00800000 /* Pull M_CLK low aft recv 3 chars */ |
| 299 |
|
| 300 |
/* bitmasks for IOC3_K_RD and IOC3_M_RD */ |
| 301 |
#define KM_RD_DATA_2 0x000000ff /* 3rd char recvd since last read */ |
| 302 |
#define KM_RD_DATA_2_SHIFT 0 |
| 303 |
#define KM_RD_DATA_1 0x0000ff00 /* 2nd char recvd since last read */ |
| 304 |
#define KM_RD_DATA_1_SHIFT 8 |
| 305 |
#define KM_RD_DATA_0 0x00ff0000 /* 1st char recvd since last read */ |
| 306 |
#define KM_RD_DATA_0_SHIFT 16 |
| 307 |
#define KM_RD_FRAME_ERR_2 0x01000000 /* framing or parity error in byte 2 */ |
| 308 |
#define KM_RD_FRAME_ERR_1 0x02000000 /* same for byte 1 */ |
| 309 |
#define KM_RD_FRAME_ERR_0 0x04000000 /* same for byte 0 */ |
| 310 |
|
| 311 |
#define KM_RD_KBD_MSE 0x08000000 /* 0 if from kbd, 1 if from mouse */ |
| 312 |
#define KM_RD_OFLO 0x10000000 /* 4th char recvd before this read */ |
| 313 |
#define KM_RD_VALID_2 0x20000000 /* DATA_2 valid */ |
| 314 |
#define KM_RD_VALID_1 0x40000000 /* DATA_1 valid */ |
| 315 |
#define KM_RD_VALID_0 0x80000000 /* DATA_0 valid */ |
| 316 |
#define KM_RD_VALID_ALL (KM_RD_VALID_0|KM_RD_VALID_1|KM_RD_VALID_2) |
| 317 |
|
| 318 |
/* bitmasks for IOC3_K_WD & IOC3_M_WD */ |
| 319 |
#define KM_WD_WRT_DATA 0x000000ff /* write to keyboard/mouse port */ |
| 320 |
#define KM_WD_WRT_DATA_SHIFT 0 |
| 321 |
|
| 322 |
/* bitmasks for serial RX status byte */ |
| 323 |
#define RXSB_OVERRUN 0x01 /* char(s) lost */ |
| 324 |
#define RXSB_PAR_ERR 0x02 /* parity error */ |
| 325 |
#define RXSB_FRAME_ERR 0x04 /* framing error */ |
| 326 |
#define RXSB_BREAK 0x08 /* break character */ |
| 327 |
#define RXSB_CTS 0x10 /* state of CTS */ |
| 328 |
#define RXSB_DCD 0x20 /* state of DCD */ |
| 329 |
#define RXSB_MODEM_VALID 0x40 /* DCD, CTS and OVERRUN are valid */ |
| 330 |
#define RXSB_DATA_VALID 0x80 /* data byte, FRAME_ERR PAR_ERR & BREAK valid */ |
| 331 |
|
| 332 |
/* bitmasks for serial TX control byte */ |
| 333 |
#define TXCB_INT_WHEN_DONE 0x20 /* interrupt after this byte is sent */ |
| 334 |
#define TXCB_INVALID 0x00 /* byte is invalid */ |
| 335 |
#define TXCB_VALID 0x40 /* byte is valid */ |
| 336 |
#define TXCB_MCR 0x80 /* data<7:0> to modem control register */ |
| 337 |
#define TXCB_DELAY 0xc0 /* delay data<7:0> mSec */ |
| 338 |
|
| 339 |
/* bitmasks for IOC3_SBBR_L */ |
| 340 |
#define SBBR_L_SIZE 0x00000001 /* 0 == 1KB rings, 1 == 4KB rings */ |
| 341 |
#define SBBR_L_BASE 0xfffff000 /* lower serial ring base addr */ |
| 342 |
|
| 343 |
/* bitmasks for IOC3_SSCR_<A:B> */ |
| 344 |
#define SSCR_RX_THRESHOLD 0x000001ff /* hiwater mark */ |
| 345 |
#define SSCR_TX_TIMER_BUSY 0x00010000 /* TX timer in progress */ |
| 346 |
#define SSCR_HFC_EN 0x00020000 /* hardware flow control enabled */ |
| 347 |
#define SSCR_RX_RING_DCD 0x00040000 /* post RX record on delta-DCD */ |
| 348 |
#define SSCR_RX_RING_CTS 0x00080000 /* post RX record on delta-CTS */ |
| 349 |
#define SSCR_HIGH_SPD 0x00100000 /* 4X speed */ |
| 350 |
#define SSCR_DIAG 0x00200000 /* bypass clock divider for sim */ |
| 351 |
#define SSCR_RX_DRAIN 0x08000000 /* drain RX buffer to memory */ |
| 352 |
#define SSCR_DMA_EN 0x10000000 /* enable ring buffer DMA */ |
| 353 |
#define SSCR_DMA_PAUSE 0x20000000 /* pause DMA */ |
| 354 |
#define SSCR_PAUSE_STATE 0x40000000 /* sets when PAUSE takes effect */ |
| 355 |
#define SSCR_RESET 0x80000000 /* reset DMA channels */ |
| 356 |
|
| 357 |
/* all producer/consumer pointers are the same bitfield */ |
| 358 |
#define PROD_CONS_PTR_4K 0x00000ff8 /* for 4K buffers */ |
| 359 |
#define PROD_CONS_PTR_1K 0x000003f8 /* for 1K buffers */ |
| 360 |
#define PROD_CONS_PTR_OFF 3 |
| 361 |
|
| 362 |
/* bitmasks for IOC3_SRCIR_<A:B> */ |
| 363 |
#define SRCIR_ARM 0x80000000 /* arm RX timer */ |
| 364 |
|
| 365 |
/* bitmasks for IOC3_SRPIR_<A:B> */ |
| 366 |
#define SRPIR_BYTE_CNT 0x07000000 /* bytes in packer */ |
| 367 |
#define SRPIR_BYTE_CNT_SHIFT 24 |
| 368 |
|
| 369 |
/* bitmasks for IOC3_STCIR_<A:B> */ |
| 370 |
#define STCIR_BYTE_CNT 0x0f000000 /* bytes in unpacker */ |
| 371 |
#define STCIR_BYTE_CNT_SHIFT 24 |
| 372 |
|
| 373 |
/* bitmasks for IOC3_SHADOW_<A:B> */ |
| 374 |
#define SHADOW_DR 0x00000001 /* data ready */ |
| 375 |
#define SHADOW_OE 0x00000002 /* overrun error */ |
| 376 |
#define SHADOW_PE 0x00000004 /* parity error */ |
| 377 |
#define SHADOW_FE 0x00000008 /* framing error */ |
| 378 |
#define SHADOW_BI 0x00000010 /* break interrupt */ |
| 379 |
#define SHADOW_THRE 0x00000020 /* transmit holding register empty */ |
| 380 |
#define SHADOW_TEMT 0x00000040 /* transmit shift register empty */ |
| 381 |
#define SHADOW_RFCE 0x00000080 /* char in RX fifo has an error */ |
| 382 |
#define SHADOW_DCTS 0x00010000 /* delta clear to send */ |
| 383 |
#define SHADOW_DDCD 0x00080000 /* delta data carrier detect */ |
| 384 |
#define SHADOW_CTS 0x00100000 /* clear to send */ |
| 385 |
#define SHADOW_DCD 0x00800000 /* data carrier detect */ |
| 386 |
#define SHADOW_DTR 0x01000000 /* data terminal ready */ |
| 387 |
#define SHADOW_RTS 0x02000000 /* request to send */ |
| 388 |
#define SHADOW_OUT1 0x04000000 /* 16550 OUT1 bit */ |
| 389 |
#define SHADOW_OUT2 0x08000000 /* 16550 OUT2 bit */ |
| 390 |
#define SHADOW_LOOP 0x10000000 /* loopback enabled */ |
| 391 |
|
| 392 |
/* bitmasks for IOC3_SRTR_<A:B> */ |
| 393 |
#define SRTR_CNT 0x00000fff /* reload value for RX timer */ |
| 394 |
#define SRTR_CNT_VAL 0x0fff0000 /* current value of RX timer */ |
| 395 |
#define SRTR_CNT_VAL_SHIFT 16 |
| 396 |
#define SRTR_HZ 16000 /* SRTR clock frequency */ |
| 397 |
|
| 398 |
/* bitmasks for IOC3_SIO_IR, IOC3_SIO_IEC and IOC3_SIO_IES */ |
| 399 |
#define SIO_IR_SA_TX_MT 0x00000001 /* Serial port A TX empty */ |
| 400 |
#define SIO_IR_SA_RX_FULL 0x00000002 /* port A RX buf full */ |
| 401 |
#define SIO_IR_SA_RX_HIGH 0x00000004 /* port A RX hiwat */ |
| 402 |
#define SIO_IR_SA_RX_TIMER 0x00000008 /* port A RX timeout */ |
| 403 |
#define SIO_IR_SA_DELTA_DCD 0x00000010 /* port A delta DCD */ |
| 404 |
#define SIO_IR_SA_DELTA_CTS 0x00000020 /* port A delta CTS */ |
| 405 |
#define SIO_IR_SA_INT 0x00000040 /* port A pass-thru intr */ |
| 406 |
#define SIO_IR_SA_TX_EXPLICIT 0x00000080 /* port A explicit TX thru */ |
| 407 |
#define SIO_IR_SA_MEMERR 0x00000100 /* port A PCI error */ |
| 408 |
#define SIO_IR_SB_TX_MT 0x00000200 /* */ |
| 409 |
#define SIO_IR_SB_RX_FULL 0x00000400 /* */ |
| 410 |
#define SIO_IR_SB_RX_HIGH 0x00000800 /* */ |
| 411 |
#define SIO_IR_SB_RX_TIMER 0x00001000 /* */ |
| 412 |
#define SIO_IR_SB_DELTA_DCD 0x00002000 /* */ |
| 413 |
#define SIO_IR_SB_DELTA_CTS 0x00004000 /* */ |
| 414 |
#define SIO_IR_SB_INT 0x00008000 /* */ |
| 415 |
#define SIO_IR_SB_TX_EXPLICIT 0x00010000 /* */ |
| 416 |
#define SIO_IR_SB_MEMERR 0x00020000 /* */ |
| 417 |
#define SIO_IR_PP_INT 0x00040000 /* P port pass-thru intr */ |
| 418 |
#define SIO_IR_PP_INTA 0x00080000 /* PP context A thru */ |
| 419 |
#define SIO_IR_PP_INTB 0x00100000 /* PP context B thru */ |
| 420 |
#define SIO_IR_PP_MEMERR 0x00200000 /* PP PCI error */ |
| 421 |
#define SIO_IR_KBD_INT 0x00400000 /* kbd/mouse intr */ |
| 422 |
#define SIO_IR_RT_INT 0x08000000 /* RT output pulse */ |
| 423 |
#define SIO_IR_GEN_INT1 0x10000000 /* RT input pulse */ |
| 424 |
#define SIO_IR_GEN_INT_SHIFT 28 |
| 425 |
|
| 426 |
/* per device interrupt masks */ |
| 427 |
#define SIO_IR_SA (SIO_IR_SA_TX_MT | SIO_IR_SA_RX_FULL | \ |
| 428 |
SIO_IR_SA_RX_HIGH | SIO_IR_SA_RX_TIMER | \ |
| 429 |
SIO_IR_SA_DELTA_DCD | SIO_IR_SA_DELTA_CTS | \ |
| 430 |
SIO_IR_SA_INT | SIO_IR_SA_TX_EXPLICIT | \ |
| 431 |
SIO_IR_SA_MEMERR) |
| 432 |
#define SIO_IR_SB (SIO_IR_SB_TX_MT | SIO_IR_SB_RX_FULL | \ |
| 433 |
SIO_IR_SB_RX_HIGH | SIO_IR_SB_RX_TIMER | \ |
| 434 |
SIO_IR_SB_DELTA_DCD | SIO_IR_SB_DELTA_CTS | \ |
| 435 |
SIO_IR_SB_INT | SIO_IR_SB_TX_EXPLICIT | \ |
| 436 |
SIO_IR_SB_MEMERR) |
| 437 |
#define SIO_IR_PP (SIO_IR_PP_INT | SIO_IR_PP_INTA | \ |
| 438 |
SIO_IR_PP_INTB | SIO_IR_PP_MEMERR) |
| 439 |
#define SIO_IR_RT (SIO_IR_RT_INT | SIO_IR_GEN_INT1) |
| 440 |
|
| 441 |
/* bitmasks for SIO_CR */ |
| 442 |
#define SIO_CR_SIO_RESET 0x00000001 /* reset the SIO */ |
| 443 |
#define SIO_CR_SER_A_BASE 0x000000fe /* DMA poll addr port A */ |
| 444 |
#define SIO_CR_SER_A_BASE_SHIFT 1 |
| 445 |
#define SIO_CR_SER_B_BASE 0x00007f00 /* DMA poll addr port B */ |
| 446 |
#define SIO_CR_SER_B_BASE_SHIFT 8 |
| 447 |
#define SIO_SR_CMD_PULSE 0x00078000 /* byte bus strobe length */ |
| 448 |
#define SIO_CR_CMD_PULSE_SHIFT 15 |
| 449 |
#define SIO_CR_ARB_DIAG 0x00380000 /* cur !enet PCI requet (ro) */ |
| 450 |
#define SIO_CR_ARB_DIAG_TXA 0x00000000 |
| 451 |
#define SIO_CR_ARB_DIAG_RXA 0x00080000 |
| 452 |
#define SIO_CR_ARB_DIAG_TXB 0x00100000 |
| 453 |
#define SIO_CR_ARB_DIAG_RXB 0x00180000 |
| 454 |
#define SIO_CR_ARB_DIAG_PP 0x00200000 |
| 455 |
#define SIO_CR_ARB_DIAG_IDLE 0x00400000 /* 0 -> active request (ro) */ |
| 456 |
|
| 457 |
/* bitmasks for INT_OUT */ |
| 458 |
#define INT_OUT_COUNT 0x0000ffff /* pulse interval timer */ |
| 459 |
#define INT_OUT_MODE 0x00070000 /* mode mask */ |
| 460 |
#define INT_OUT_MODE_0 0x00000000 /* set output to 0 */ |
| 461 |
#define INT_OUT_MODE_1 0x00040000 /* set output to 1 */ |
| 462 |
#define INT_OUT_MODE_1PULSE 0x00050000 /* send 1 pulse */ |
| 463 |
#define INT_OUT_MODE_PULSES 0x00060000 /* send 1 pulse every interval */ |
| 464 |
#define INT_OUT_MODE_SQW 0x00070000 /* toggle output every interval */ |
| 465 |
#define INT_OUT_DIAG 0x40000000 /* diag mode */ |
| 466 |
#define INT_OUT_INT_OUT 0x80000000 /* current state of INT_OUT */ |
| 467 |
|
| 468 |
/* time constants for INT_OUT */ |
| 469 |
#define INT_OUT_NS_PER_TICK (30 * 260) /* 30 ns PCI clock, divisor=260 */ |
| 470 |
#define INT_OUT_TICKS_PER_PULSE 3 /* outgoing pulse lasts 3 ticks */ |
| 471 |
#define INT_OUT_US_TO_COUNT(x) /* convert uS to a count value */ \ |
| 472 |
(((x) * 10 + INT_OUT_NS_PER_TICK / 200) * \ |
| 473 |
100 / INT_OUT_NS_PER_TICK - 1) |
| 474 |
#define INT_OUT_COUNT_TO_US(x) /* convert count value to uS */ \ |
| 475 |
(((x) + 1) * INT_OUT_NS_PER_TICK / 1000) |
| 476 |
#define INT_OUT_MIN_TICKS 3 /* min period is width of pulse in "ticks" */ |
| 477 |
#define INT_OUT_MAX_TICKS INT_OUT_COUNT /* largest possible count */ |
| 478 |
|
| 479 |
/* bitmasks for GPCR */ |
| 480 |
#define GPCR_DIR 0x000000ff /* tristate pin input or output */ |
| 481 |
#define GPCR_DIR_PIN(x) (1<<(x)) /* access one of the DIR bits */ |
| 482 |
#define GPCR_EDGE 0x000f0000 /* extint edge or level sensitive */ |
| 483 |
#define GPCR_EDGE_PIN(x) (1<<((x)+15)) /* access one of the EDGE bits */ |
| 484 |
|
| 485 |
/* values for GPCR */ |
| 486 |
#define GPCR_INT_OUT_EN 0x00100000 /* enable INT_OUT to pin 0 */ |
| 487 |
#define GPCR_MLAN_EN 0x00200000 /* enable MCR to pin 8 */ |
| 488 |
#define GPCR_DIR_SERA_XCVR 0x00000080 /* Port A Transceiver select enable */ |
| 489 |
#define GPCR_DIR_SERB_XCVR 0x00000040 /* Port B Transceiver select enable */ |
| 490 |
#define GPCR_DIR_PHY_RST 0x00000020 /* ethernet PHY reset enable */ |
| 491 |
|
| 492 |
/* defs for some of the generic I/O pins */ |
| 493 |
#define GPCR_PHY_RESET 0x20 /* pin is output to PHY reset */ |
| 494 |
#define GPCR_UARTB_MODESEL 0x40 /* pin is output to port B mode sel */ |
| 495 |
#define GPCR_UARTA_MODESEL 0x80 /* pin is output to port A mode sel */ |
| 496 |
|
| 497 |
#define GPPR_PHY_RESET_PIN 5 /* GIO pin cntrlling phy reset */ |
| 498 |
#define GPPR_UARTB_MODESEL_PIN 6 /* GIO pin cntrlling uart b mode sel */ |
| 499 |
#define GPPR_UARTA_MODESEL_PIN 7 /* GIO pin cntrlling uart a mode sel */ |
| 500 |
|
| 501 |
/* ethernet */ |
| 502 |
#define EMCR_DUPLEX 0x00000001 |
| 503 |
#define EMCR_PROMISC 0x00000002 |
| 504 |
#define EMCR_PADEN 0x00000004 |
| 505 |
#define EMCR_RXOFF_MASK 0x000001f8 |
| 506 |
#define EMCR_RXOFF_SHIFT 3 |
| 507 |
#define EMCR_RAMPAR 0x00000200 |
| 508 |
#define EMCR_BADPAR 0x00000800 |
| 509 |
#define EMCR_BUFSIZ 0x00001000 |
| 510 |
#define EMCR_TXDMAEN 0x00002000 |
| 511 |
#define EMCR_TXEN 0x00004000 |
| 512 |
#define EMCR_RXDMAEN 0x00008000 |
| 513 |
#define EMCR_RXEN 0x00010000 |
| 514 |
#define EMCR_LOOPBACK 0x00020000 |
| 515 |
#define EMCR_ARB_DIAG 0x001c0000 |
| 516 |
#define EMCR_ARB_DIAG_IDLE 0x00200000 |
| 517 |
#define EMCR_RST 0x80000000 |
| 518 |
|
| 519 |
#define EISR_RXTIMERINT 0x00000001 |
| 520 |
#define EISR_RXTHRESHINT 0x00000002 |
| 521 |
#define EISR_RXOFLO 0x00000004 |
| 522 |
#define EISR_RXBUFOFLO 0x00000008 |
| 523 |
#define EISR_RXMEMERR 0x00000010 |
| 524 |
#define EISR_RXPARERR 0x00000020 |
| 525 |
#define EISR_TXEMPTY 0x00010000 |
| 526 |
#define EISR_TXRTRY 0x00020000 |
| 527 |
#define EISR_TXEXDEF 0x00040000 |
| 528 |
#define EISR_TXLCOL 0x00080000 |
| 529 |
#define EISR_TXGIANT 0x00100000 |
| 530 |
#define EISR_TXBUFUFLO 0x00200000 |
| 531 |
#define EISR_TXEXPLICIT 0x00400000 |
| 532 |
#define EISR_TXCOLLWRAP 0x00800000 |
| 533 |
#define EISR_TXDEFERWRAP 0x01000000 |
| 534 |
#define EISR_TXMEMERR 0x02000000 |
| 535 |
#define EISR_TXPARERR 0x04000000 |
| 536 |
|
| 537 |
#define ERCSR_THRESH_MASK 0x000001ff /* enet RX threshold */ |
| 538 |
#define ERCSR_RX_TMR 0x40000000 /* simulation only */ |
| 539 |
#define ERCSR_DIAG_OFLO 0x80000000 /* simulation only */ |
| 540 |
|
| 541 |
#define ERBR_ALIGNMENT 4096 |
| 542 |
#define ERBR_L_RXRINGBASE_MASK 0xfffff000 |
| 543 |
|
| 544 |
#define ERBAR_BARRIER_BIT 0x0100 |
| 545 |
#define ERBAR_RXBARR_MASK 0xffff0000 |
| 546 |
#define ERBAR_RXBARR_SHIFT 16 |
| 547 |
|
| 548 |
#define ERCIR_RXCONSUME_MASK 0x00000fff |
| 549 |
|
| 550 |
#define ERPIR_RXPRODUCE_MASK 0x00000fff |
| 551 |
#define ERPIR_ARM 0x80000000 |
| 552 |
|
| 553 |
#define ERTR_CNT_MASK 0x000007ff |
| 554 |
|
| 555 |
#define ETCSR_IPGT_MASK 0x0000007f |
| 556 |
#define ETCSR_IPGR1_MASK 0x00007f00 |
| 557 |
#define ETCSR_IPGR1_SHIFT 8 |
| 558 |
#define ETCSR_IPGR2_MASK 0x007f0000 |
| 559 |
#define ETCSR_IPGR2_SHIFT 16 |
| 560 |
#define ETCSR_NOTXCLK 0x80000000 |
| 561 |
|
| 562 |
#define ETCDC_COLLCNT_MASK 0x0000ffff |
| 563 |
#define ETCDC_DEFERCNT_MASK 0xffff0000 |
| 564 |
#define ETCDC_DEFERCNT_SHIFT 16 |
| 565 |
|
| 566 |
#define ETBR_ALIGNMENT (64*1024) |
| 567 |
#define ETBR_L_RINGSZ_MASK 0x00000001 |
| 568 |
#define ETBR_L_RINGSZ128 0 |
| 569 |
#define ETBR_L_RINGSZ512 1 |
| 570 |
#define ETBR_L_TXRINGBASE_MASK 0xffffc000 |
| 571 |
|
| 572 |
#define ETCIR_TXCONSUME_MASK 0x0000ffff |
| 573 |
#define ETCIR_IDLE 0x80000000 |
| 574 |
|
| 575 |
#define ETPIR_TXPRODUCE_MASK 0x0000ffff |
| 576 |
|
| 577 |
#define EBIR_TXBUFPROD_MASK 0x0000001f |
| 578 |
#define EBIR_TXBUFCONS_MASK 0x00001f00 |
| 579 |
#define EBIR_TXBUFCONS_SHIFT 8 |
| 580 |
#define EBIR_RXBUFPROD_MASK 0x007fc000 |
| 581 |
#define EBIR_RXBUFPROD_SHIFT 14 |
| 582 |
#define EBIR_RXBUFCONS_MASK 0xff800000 |
| 583 |
#define EBIR_RXBUFCONS_SHIFT 23 |
| 584 |
|
| 585 |
#define MICR_REGADDR_MASK 0x0000001f |
| 586 |
#define MICR_PHYADDR_MASK 0x000003e0 |
| 587 |
#define MICR_PHYADDR_SHIFT 5 |
| 588 |
#define MICR_READTRIG 0x00000400 |
| 589 |
#define MICR_BUSY 0x00000800 |
| 590 |
|
| 591 |
#define MIDR_DATA_MASK 0x0000ffff |
| 592 |
|
| 593 |
/* subsystem IDs supplied by card detection in pci-xtalk-bridge */ |
| 594 |
#define IOC3_SUBSYS_IP27_BASEIO6G 0xc300 |
| 595 |
#define IOC3_SUBSYS_IP27_MIO 0xc301 |
| 596 |
#define IOC3_SUBSYS_IP27_BASEIO 0xc302 |
| 597 |
#define IOC3_SUBSYS_IP29_SYSBOARD 0xc303 |
| 598 |
#define IOC3_SUBSYS_IP30_SYSBOARD 0xc304 |
| 599 |
#define IOC3_SUBSYS_MENET 0xc305 |
| 600 |
#define IOC3_SUBSYS_MENET4 0xc306 |
| 601 |
#define IOC3_SUBSYS_IO7 0xc307 |
| 602 |
#define IOC3_SUBSYS_IO8 0xc308 |
| 603 |
#define IOC3_SUBSYS_IO9 0xc309 |
| 604 |
#define IOC3_SUBSYS_IP34_SYSBOARD 0xc30A |
| 605 |
|
| 606 |
#endif /* MIPS_SN_IOC3_H */ |